Day 3It's a very nice and sunny day here, so this being the Juice challenge, after getting home I decided to test the micro flat driver on glasses or sunglasses to be precise. The Juice's smallest flat driver was a hair wider than the slot itself, but I was able to turn the screw with no problem at all. Admittedly it's a pair of cheap shades with bigger and not really precise hardware, but it worked. Usually I would have reached for a Vic's corkscrew micro driver, but the Juice's one is an adequate substitute. (Size comparison of the two drivers included for those how don't happen to own a Juice.)
Great pics guys and don't worry to much about the rust an0n as I have had several LM do that over the years Just oil it really good and work it and keep doing that until the rust stops leaking out and you should be fine
Nice!
Day 4The same here, but with scissors. They struggled a bit where I cut into the packaging tape too, but did the job.
Great pics and uses guys Great thread so far as well
Quote from: Exeter on April 09, 2018, 07:23:08 PMDay 4The same here, but with scissors. They struggled a bit where I cut into the packaging tape too, but did the job.The Pioneer X scissors are superior than our Juices', but at least we have them
Quote from: an0nemus on April 10, 2018, 04:34:41 PMQuote from: Exeter on April 09, 2018, 07:23:08 PMDay 4The same here, but with scissors. They struggled a bit where I cut into the packaging tape too, but did the job.The Pioneer X scissors are superior than our Juices', but at least we have them Agreed. But Juice scissors work when needed.
Day 6Discovered some small dents on my Golfer's liner, used the Juice's diamond file to even them out a bit. Barely, but I could reach them. Sorry about the crappy pics, I wanted to make a before-after pair, but the before pic turned out to be out of focus. I'd need something with better macro capabilites. (I struggled with the micro screwdrivers pics as well.) I'm not even sure you can see what I was trying to show.
Good challenge so far fellas ! And nice haul anon !
Day 7Package opening again, a nice little haul from our friend ThePeacent arrived today. He wrapped it so well that the Juice really had its work cut out. And just to keep up with an0nemus, I got a SAK as well. And about the finger: nothing serious at all, only some small cut on my knuckle, I just didn't wan to leave bloodstains on my clothes or on the furtniture accidentally. Already healed up overnight, really a small booboo.
Nice work, guys.
Day 8The can opener was put to the test with a can of tomato paste. The Juice can opener (bottle opener, wine bottle leverage foot combo) isn't the best, especially with small cans like this, and clearly a distant fourth behind the Victorinox, the Wenger and the traditional Leatherman openers (I prefer the style of the latter two), but does the job anyway - I wouldn't even say "in a pinch", but if you have other options, choose one of those. Oh, and nice patches there an0nemus and of course Jaya!
Quote from: Exeter on April 13, 2018, 06:45:26 PMDay 8The can opener was put to the test with a can of tomato paste. The Juice can opener (bottle opener, wine bottle leverage foot combo) isn't the best, especially with small cans like this, and clearly a distant fourth behind the Victorinox, the Wenger and the traditional Leatherman openers (I prefer the style of the latter two), but does the job anyway - I wouldn't even say "in a pinch", but if you have other options, choose one of those. Oh, and nice patches there an0nemus and of course Jaya!Great challenge and good read guys As for the can opener it helps to put a slight edge onto it. On my Juice I made it more pointy to the front end so it can easily pinch a hole. But let it wider at the back so it still works great as bottle opener.
Donations
Community Links
