Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Newest Expedition Lite - question on metal saw and LED

FolderBeholder · 30 · 1347
« previous next »
Pages: 1   Go Down

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Newest Expedition Lite - question on metal saw and LED
on: April 15, 2018, 08:22:10 PM
I want to buy an Expedition Lite.  It mainly comes part of a kit which is fine, but I wanted to know if anyone knows if the metal saw is the newest one.
The newest one has slanted lines on it and not cross lines (hope that makes sense).
Also, I noticed someone showing a new housing that is being offered on the LED light.  I wondered if I bought from Victorinox, if it would have these newest features?

This knife:
http://www.sakwiki.com/tiki-index.php?page=Expedition+Lite

Considering buying from here:
https://www.victorinox.com/us/en/Products/Swiss-Army-Knives/Medium-Pocket-Knives/Expedition-Kit/p/1.8741.AVT

Thank you in advance.
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

wales Offline Smashie

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,322
  • Smurf it!
Re: Newest Expedition Lite - question on metal saw and LED
Reply #1 on: April 15, 2018, 08:31:58 PM
Well all the SAKs I bought over the last year, with the exception of an SI, had the new file on it. Pretty much guaranteed to get the latest version if you buy from Vic  :tu:
“Strong minds discuss ideas, average minds discuss events, weak minds discuss people.” - Socrates
"I'm not feeling very talky today, off you smurf". - Smashie
Complaining is mental preparation for failure.
Si vis pacem, para bellum
Merit Badges Must start a thread with a photo of at least five (5) of your watches Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must buy an item through the MTo Store Must start a thread with a photo of your birth year SAK Start a new thread with a photo of your custom ALOX with scissors Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of at least 8 different 111mm models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with pictures of a Fish Scaler in use Start a thread with photos of at least 1 MTO branded tool in your collection Must buy something on EDCSource

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Re: Newest Expedition Lite - question on metal saw and LED
Reply #2 on: April 15, 2018, 08:34:56 PM
Quote from: Smashie on April 15, 2018, 08:31:58 PM
Well all the SAKs I bought over the last year, with the exception of an SI, had the new file on it. Pretty much guaranteed to get the latest version if you buy from Vic  :tu:
Good to know, thank you. 
I see they offer free returns, so I may just go ahead and buy it.
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

us Offline twiliter

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,520
  • motionless wheel, nothing is real
Re: Newest Expedition Lite - question on metal saw and LED
Reply #3 on: April 15, 2018, 08:44:17 PM
The new file has been out since '05, so that will probably be on the Ex Kit if you order from Vic, but no way to tell about the light, there is supposedly a much brighter version now than the original, and more recently the clear housing as we saw on Hiraethus' CT Lite. Might be worth e-mailing Vic and see if they can tell you before you order, because there is probably a lot of old stock of that model that they might be trying to get rid of first?
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Start a thread with photos of at least five different colored ALOX models in your collection Must start a thread with a photo of your birth year SAK Start a new thread with a photo showing the Hook in use

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Re: Newest Expedition Lite - question on metal saw and LED
Reply #4 on: April 15, 2018, 11:56:55 PM
Quote from: twiliter on April 15, 2018, 08:44:17 PM
Might be worth e-mailing Vic and see if they can tell you before you order, because there is probably a lot of old stock of that model that they might be trying to get rid of first?
Good idea, I just did, so I will hopefully find out something soon. 
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

00 Offline Thunderpants

  • No Life Club
  • ******
    • Posts: 3,281
Re: Newest Expedition Lite - question on metal saw and LED
Reply #5 on: April 16, 2018, 09:20:48 AM
Have you read the instructions for the altimeter tool? It sounds like the ultimate button-pressing nightmare.
(I have a similarly tedious aquarium feeder which I use whenever we go away for a few days. Programming it drives me practically berserk with frustration...)
Adjusting.jpg
* Adjusting.jpg (Filesize: 99.54 KB)
Merit Badges Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo showing the Hook in use Start a new thread with photos of at least 5 different 130mm models in your collection Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days.

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Re: Newest Expedition Lite - question on metal saw and LED
Reply #6 on: April 16, 2018, 02:39:37 PM
Quote from: Thunderpants on April 16, 2018, 09:20:48 AM
Have you read the instructions for the altimeter tool? It sounds like the ultimate button-pressing nightmare.

Yes, it's no fun at all, but what I mainly want is the light up feature that the LCD has when you get both the clock & altimeter tool in one.
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

00 Offline Thunderpants

  • No Life Club
  • ******
    • Posts: 3,281
Re: Newest Expedition Lite - question on metal saw and LED
Reply #7 on: April 16, 2018, 03:10:49 PM
OK, it sounds like you really want those funky electronic scales.
If it was just the Lite you were into, I'd suggest the Mountaineer Lite which has most of the same features for half the price! (Still expensive though!)
I doubt a SAK that expensive would come with decades old components. My Mountaineer Lite had been sitting on a shelf, unsold, for several years when I got it but still had the newest bits and pieces. (apart from the fits-in-the-corkscrew screwdriver! I got a round one, not the hex one - so I was happy about that.)
Merit Badges Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo showing the Hook in use Start a new thread with photos of at least 5 different 130mm models in your collection Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days.

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Re: Newest Expedition Lite - question on metal saw and LED
Reply #8 on: April 16, 2018, 03:17:28 PM
Quote from: Thunderpants on April 16, 2018, 03:10:49 PM
OK, it sounds like you really want those funky electronic scales.
It's true I do.  I already have a Voyager Lite and an Altimeter, plus the XAVT, so I'm familiar with the quirkiness of the electronics.
I just like the features of the Expedition Light having a toolset that seems like tools I'd like to carry plus the light within the clock area.
It's good you made me think about it though.  :cheers:
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

ie Offline Don Pablo

  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,292
  • Yoo-hoo, big summer blowout!
Re: Newest Expedition Lite - question on metal saw and LED
Reply #9 on: April 16, 2018, 04:25:04 PM
Button pressing nightmare? Now that sounds like right up my street!  :like: :drool:
Hooked, like everyone else. ;)

All hail the hook!
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days.

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Re: Newest Expedition Lite - question on metal saw and LED
Reply #10 on: April 18, 2018, 02:27:07 AM
I just received word from Victorinox, that the Expedition Lite sold on their website does have the newest LED housing.  :tu:  I will be ordering soon.
« Last Edit: April 18, 2018, 02:31:09 AM by FolderBeholder »
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

wales Offline hiraethus

  • Admin Team
  • *
  • Absolutely No Life Club
  • *
    • Posts: 6,965
  • I brake for cake
Re: Newest Expedition Lite - question on metal saw and LED
Reply #11 on: April 18, 2018, 10:22:33 AM
 :tu:
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Must update or add a page on SAKWiki Must start a thread showing a photo of at least three BO tools Start a new thread with a photo of your custom ALOX with scissors Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Must start a thread with a photo of your birth year SAK

00 Offline Thunderpants

  • No Life Club
  • ******
    • Posts: 3,281
Re: Newest Expedition Lite - question on metal saw and LED
Reply #12 on: April 18, 2018, 10:34:03 AM
I hope you remember to order some extra dense sunglasses as well cos it sounds like you're on a one way ride to Dazzle City!
Well maybe not!
Merit Badges Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo showing the Hook in use Start a new thread with photos of at least 5 different 130mm models in your collection Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days.

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Re: Newest Expedition Lite - question on metal saw and LED
Reply #13 on: April 18, 2018, 02:54:35 PM
Quote from: Thunderpants on April 18, 2018, 10:34:03 AM
I hope you remember to order some extra dense sunglasses as well cos it sounds like you're on a one way ride to Dazzle City!
Well maybe not!
I think I'll name her RazzleDazzle!  :D
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

us Offline VICMAN

  • *
  • Zombie Apprentice
  • ********
    • Posts: 12,472
Re: Newest Expedition Lite - question on metal saw and LED
Reply #14 on: April 18, 2018, 07:09:48 PM
 :like: :tu: :tu:
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 8 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your stayglow SAK

gb Offline Fast Bill

  • *
  • No Life Club
  • ******
    • Posts: 4,650
  • Carpe titanium
Re: Newest Expedition Lite - question on metal saw and LED
Reply #15 on: April 18, 2018, 08:53:50 PM
Quote from: FolderBeholder on April 16, 2018, 03:17:28 PM
Quote from: Thunderpants on April 16, 2018, 03:10:49 PM
OK, it sounds like you really want those funky electronic scales.
It's true I do.  I already have a Voyager Lite and an Altimeter, plus the XAVT, so I'm familiar with the quirkiness of the electronics.
I just like the features of the Expedition Light having a toolset that seems like tools I'd like to carry plus the light within the clock area.
It's good you made me think about it though.  :cheers:

 :like: those scales really work for me. Ok the LED on my Traveller Lite is rubbish but I don't care !  :cheers:
Per Titanium Ad Tearoom.
Apex predator of fruit cake
Merit Badges Start a new thread or Post in a Challenge Thread and post a photo of a Spartan  for 30 days Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of the Vic Huntsman for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread showing photos of at least 3 different sporks in use Test,please ignore Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a new thread with photos of your titanium gear with a multitool or sak

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Re: Newest Expedition Lite - question on metal saw and LED
Reply #16 on: April 19, 2018, 10:43:26 PM
Order placed!  :woohoo:
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

gb Offline Fast Bill

  • *
  • No Life Club
  • ******
    • Posts: 4,650
  • Carpe titanium
Re: Newest Expedition Lite - question on metal saw and LED
Reply #17 on: April 19, 2018, 11:08:22 PM
 :popcorn:
Per Titanium Ad Tearoom.
Apex predator of fruit cake
Merit Badges Start a new thread or Post in a Challenge Thread and post a photo of a Spartan  for 30 days Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of the Vic Huntsman for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread showing photos of at least 3 different sporks in use Test,please ignore Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a new thread with photos of your titanium gear with a multitool or sak

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: Newest Expedition Lite - question on metal saw and LED
Reply #18 on: April 19, 2018, 11:18:59 PM
Quote from: twiliter on April 15, 2018, 08:44:17 PM
The new file has been out since '05, so that will probably be on the Ex Kit if you order from Vic, but no way to tell about the light, there is supposedly a much brighter version now than the original, and more recently the clear housing as we saw on Hiraethus' CT Lite. Might be worth e-mailing Vic and see if they can tell you before you order, because there is probably a lot of old stock of that model that they might be trying to get rid of first?

Oh really, I haven't seen this housing yet.  Have a link?  Doesnt it still have double liners on each side?
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline twiliter

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,520
  • motionless wheel, nothing is real
Re: Newest Expedition Lite - question on metal saw and LED
Reply #19 on: April 19, 2018, 11:24:25 PM
Here you go Syph, yeah looks like just the housing is clear now, same liners.  :tu:

https://forum.multitool.org/index.php/topic,21658.msg1677158.html#msg1677158
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Start a thread with photos of at least five different colored ALOX models in your collection Must start a thread with a photo of your birth year SAK Start a new thread with a photo showing the Hook in use

us Offline twiliter

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,520
  • motionless wheel, nothing is real
Re: Newest Expedition Lite - question on metal saw and LED
Reply #20 on: April 19, 2018, 11:26:11 PM
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Start a thread with photos of at least five different colored ALOX models in your collection Must start a thread with a photo of your birth year SAK Start a new thread with a photo showing the Hook in use

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Re: Newest Expedition Lite - question on metal saw and LED
Reply #21 on: April 20, 2018, 12:04:15 AM
Victorinox offers a 20% off coupon code if you sign up for their newsletter.   :cheers:
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

us Offline twiliter

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,520
  • motionless wheel, nothing is real
Re: Newest Expedition Lite - question on metal saw and LED
Reply #22 on: April 20, 2018, 01:21:36 AM
Good info FB, thanks.  :cheers:
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Start a thread with photos of at least five different colored ALOX models in your collection Must start a thread with a photo of your birth year SAK Start a new thread with a photo showing the Hook in use

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: Newest Expedition Lite - question on metal saw and LED
Reply #23 on: April 21, 2018, 03:15:08 PM
Quote from: twiliter on April 19, 2018, 11:24:25 PM
Here you go Syph, yeah looks like just the housing is clear now, same liners.  :tu:

https://forum.multitool.org/index.php/topic,21658.msg1677158.html#msg1677158

Looks better than the old gray one.  At least that clear plastic (if its the same type as mag glass housing) is pretty durable.  That gray plastic on the old lite was so brittle.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Re: Newest Expedition Lite - question on metal saw and LED
Reply #24 on: April 21, 2018, 05:13:37 PM
It's been shipped.  It's coming from Connecticut I think, free ground shipping.
I just couldn't pony up that extra $9.99 for faster shipping.  :facepalm:
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

us Offline VICMAN

  • *
  • Zombie Apprentice
  • ********
    • Posts: 12,472
Re: Newest Expedition Lite - question on metal saw and LED
Reply #25 on: April 21, 2018, 09:53:49 PM
Quote from: FolderBeholder on April 21, 2018, 05:13:37 PM
It's been shipped.  It's coming from Connecticut I think, free ground shipping.
I just couldn't pony up that extra $9.99 for faster shipping.  :facepalm:

Don't feel bad.

I won't pay extra for faster shipping either FB! :cheers:
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 8 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your stayglow SAK

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Re: Newest Expedition Lite - question on metal saw and LED
Reply #26 on: April 21, 2018, 09:55:51 PM
Quote from: VICMAN on April 21, 2018, 09:53:49 PM
Quote from: FolderBeholder on April 21, 2018, 05:13:37 PM
It's been shipped.  It's coming from Connecticut I think, free ground shipping.
I just couldn't pony up that extra $9.99 for faster shipping.  :facepalm:

Don't feel bad.

I won't pay extra for faster shipping either FB! :cheers:

Good to know I'm not alone.  :D  :tu:
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

us Offline jalind

  • *
  • No Life Club
  • ******
    • Posts: 1,670
Re: Newest Expedition Lite - question on metal saw and LED
Reply #27 on: April 22, 2018, 10:43:06 AM
Quote from: FolderBeholder on April 21, 2018, 09:55:51 PM
Quote from: VICMAN on April 21, 2018, 09:53:49 PM
Quote from: FolderBeholder on April 21, 2018, 05:13:37 PM
It's been shipped.  It's coming from Connecticut I think, free ground shipping.
I just couldn't pony up that extra $9.99 for faster shipping.  :facepalm:

Don't feel bad.

I won't pay extra for faster shipping either FB! :cheers:

Good to know I'm not alone.  :D :tu:

Neither will I.  :)

John
John
Merit Badges Start a new thread with photos of your Buck knives in use Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Start a new thread with photos of at least 8 different 111mm models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with photos of your carabiners in use Start a new thread with photos of your chainsaws Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread and post a picture of a fish or fishing kit with a multitool Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread showing photos of at least 3 different sporks in use Start a thread with a photo of at least ten OPT's in your collection Start a new thread with pictures of a Fish Scaler in use Start a new thread with photos of your hobo knives in use

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,018
Re: Newest Expedition Lite - question on metal saw and LED
Reply #28 on: April 22, 2018, 03:14:38 PM
Quote from: jalind on April 22, 2018, 10:43:06 AM
Quote from: FolderBeholder on April 21, 2018, 09:55:51 PM
Quote from: VICMAN on April 21, 2018, 09:53:49 PM
Quote from: FolderBeholder on April 21, 2018, 05:13:37 PM
It's been shipped.  It's coming from Connecticut I think, free ground shipping.
I just couldn't pony up that extra $9.99 for faster shipping.  :facepalm:

Don't feel bad.

I won't pay extra for faster shipping either FB! :cheers:

Good to know I'm not alone.  :D :tu:

Neither will I.  :)

John
I thought about it for about half a second, and nope, can't do it.  Looks like I'm in good company.  :cheers:
Rest in peace ColoSwiss, you will always be remembered.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store

ie Offline Don Pablo

  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,292
  • Yoo-hoo, big summer blowout!
Re: Newest Expedition Lite - question on metal saw and LED
Reply #29 on: April 22, 2018, 03:49:12 PM
It took 4 weeks each, for the last two flashlights I ordered from Hong Kong to arrive.
Some "airmail".  ::) :D
I'm glad it was free at least. :D
Hooked, like everyone else. ;)

All hail the hook!
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days.

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal