This thing hasn't been out my pocket since i made it I wanted a simple two layer with mag glass but had no need for the Phillips so adapted the backside awl to fit opposite, i kept the two blades as i like having them, the important parts i got from a beat up old Champion and a liner from a Climber...i just had to re use the fluted corkscrew as i like those too As you can see the position of the Awl worked out perfectly, my measuring tape must be reasonably accurate
It's actually very strong, its holding up well, Hth
GoatDragon, i moved the Awl because i didn't want the Phillips and struggled to think of something to replace it with, i decided on the Awl as i prefer inline awls and it would get more use than a screwdriver, as i used the original spring for the Mag glass and Phillips there is no place for a backside tool Thanks VICMAN Matt, its a cut and shut, yes it is slightly narrower but i used the base of the Phillips and its centred on that so it makes it the original widthPics recycled from my Mod Squad post.(Image removed from quote.)(Image removed from quote.)It's actually very strong, its holding up well, Hth