By removing the spacers I was able to get 6 tools on one arm rather than just 4. The two thinnest spacers were used between the sisors and the next tool and the blade. This way when I flick the blade open, nothing else opens. I think the tools are kind of meh. But the size on them is perfect. I cut a slot in the back side to add my car key. Will add another photo when I get it on there. For the record you need a 1” #10-24 screw and a lock nut for the tool side. I used a M4 20mm screw for the key side. Cheers,H.G.
Quote from: Happy Gilmore on June 24, 2018, 04:21:02 PMBy removing the spacers I was able to get 6 tools on one arm rather than just 4. The two thinnest spacers were used between the sisors and the next tool and the blade. This way when I flick the blade open, nothing else opens. I think the tools are kind of meh. But the size on them is perfect. I cut a slot in the back side to add my car key. Will add another photo when I get it on there. For the record you need a 1” #10-24 screw and a lock nut for the tool side. I used a M4 20mm screw for the key side. Cheers,H.G.What happened to the original screws?