Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Giant Mouse Jutland

us Offline David Bowen

  • Multitool Enthusiast
  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,273
  • Site Manager
Giant Mouse Jutland
on: April 16, 2026, 11:33:38 PM
We haven’t covered many slipjoint knives here on Multitool.org, and that’s something I’d like to change. There’s a lot of great slipjoint makers out there right now, and I’m not talking about the usual names like Case or Victorinox. I’m talking about companies pushing the “modern traditional” space with tighter tolerances, premium materials, and updated designs.

A great example of that is GiantMouse. Founded by Jesper Voxnaes and Jens Ansø, two designers with a long track record in the knife world, they’ve consistently put out designs that balance clean aesthetics with real usability. Slipjoints aren’t new territory for them either, and that experience shows.

The knife we’re looking at today is the Jutland, a design that originally made its name as a full locking hunting folder. It even picked up “Best Hunting Folder” from Field & Stream in both 2023 and 2024. This version takes that same DNA and scales it down into a slipjoint format, which is honestly a pretty interesting move.

Named after the Jutland Peninsula in Denmark, the design pulls from that rugged, outdoors-focused identity but packages it into something that’s easy to carry every day. It’s a simple knife on the surface, but once you start looking closer, there’s quite a bit going on.


Handle and Comfort

Right out of the gate, the brass handles stand out. In a world where most companies default to titanium or carbon fiber, this feels like a deliberate step in a different direction. Brass brings some weight with it, and at 3.8 ounces, this is definitely on the heavier side for a single-blade slipjoint. For comparison, it’s right in line with a traditional trapper pattern, which is saying something.

That said, GiantMouse clearly made an effort to keep things under control. The handles are internally milled out, and without that, this thing would feel like a brick in your pocket. As it sits, the weight is noticeable but not excessive, and it actually adds to that “solid tool” feel.

Brass also brings character. Over time it’ll develop a patina, similar to copper, which gives the knife a more personal look the longer you carry it. If you’re into that kind of aging, this is one of those materials that just gets better with use.

Ergonomically, the Jutland works really well. I can get a full four-finger grip without feeling cramped, and the gentle arc of the handle sits naturally in the hand. There’s some jimping along the rear and spine area of the handle, which helps keep things locked in when you’re bearing down a bit harder.

The milling is another highlight. It’s not the aggressive micro-milling that’s everywhere right now, but more of a subtle texture. It adds grip without being abrasive, and it just feels good in hand. It’s one of those details you don’t fully appreciate until you’ve used it for a while.

There’s also a small touch that most people will never notice. GiantMouse tucked their logo on the inside of the handle. You won’t see it unless you take the knife apart, but it’s a neat little detail that shows they’re paying attention even to the hidden parts of the design.


Carry Options

The Jutland gives you a couple of ways to carry it. There’s a lanyard hole built in, and it’s large enough to accommodate thicker cord if that’s your thing. I’m not usually a lanyard guy either, but I’ll admit something like a brass bead setup would match this knife pretty well.

It also comes with GiantMouse’s standard wire clip. They’ve used this style across a lot of their lineup, and for good reason. It offers solid retention, it’s easy to bend back into shape if needed, and it’s far less aggressive on your pockets compared to some of the milled titanium clips out there.

That said, this is a slipjoint, and it feels perfectly at home just riding loose in the bottom of your pocket or tucked into a leather slip. The clip is nice to have, but it’s not something you’re forced to rely on.


Blade and Performance

The blade on this model carries over from the larger version and keeps that same clip point profile. I’ve always been a fan of a good clip point, and it works especially well in a slipjoint. The way the blade tapers toward the tip, paired with that clean swedge, just looks right. It’s a classic shape that still feels purposeful.

Being a slipjoint, deployment is handled with a nail nick. The placement here is a little unusual, sitting closer to the pivot than what I’m used to. Because of that, it gives the impression of a heavier pull than it probably needs. I found myself grabbing the blade a bit further down to get a smoother, more comfortable open. Personally, I think the nail nick was more of an aesthetic choice than a functional one, and I wouldn’t have minded seeing it omitted altogether.

In use, the blade performs exactly how you’d expect from this shape. There’s enough belly for general slicing tasks, and the tip is fine enough to handle piercing work without feeling fragile. It’s a well-balanced profile that doesn’t try to do anything fancy, it just works.

Steel choice here is S90V, which is a great fit for a modern slipjoint. It’s known for its excellent edge retention and high wear resistance, while still offering respectable corrosion resistance. This is actually my first time spending real time with S90V, and I’ve come away impressed. There’s been a lot of attention on MagnaCut lately, so it’s refreshing to run something different and see how it stacks up.

So far, the edge has been a trooper. I haven’t had to touch it up at all, and for the kind of everyday cutting I do, it just keeps going. I’m not exactly out there trying to destroy edges, but even with regular use, it’s held up better than I expected.

The walk and talk on the Jutland is another highlight. It’s got that crisp, mechanical feel as it moves through the half stop, with a clean snap both opening and closing. It feels precise and controlled, which says a lot about the tolerances they’re working with here.


Closing Thoughts

The Jutland is an excellent slipjoint that brings together the charm of a traditional with the precision and materials of a modern folder. Taking a hunting knife design and translating it into a slipjoint format was a bold move, but it works surprisingly well.

Everything about it feels intentional, from the materials to the action. It’s snappy, solid, and has a level of refinement that puts it a step above a lot of more traditional offerings.

If you’re after a slipjoint that leans more modern without losing that classic feel, the Jutland is absolutely worth a look.


us Offline David Bowen

  • Multitool Enthusiast
  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,273
  • Site Manager
Re: Giant Mouse Jutland
Reply #1 on: April 16, 2026, 11:35:01 PM
.


au Offline ReamerPunch

  • Thread Killer 2017
  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 11,947
  • Born to multitask.
Re: Giant Mouse Jutland
Reply #2 on: April 17, 2026, 12:00:36 AM
There's something about a big clip-point that I find appealing. The belly, the tip, it's just so elegant. And they went with S90V and brass, which looks great. Another great review, Dave!


gb Offline greenbear

  • Hero Member
  • *****
    • Posts: 801
  • Outdoorsy type and over-opinionated buffoon
Re: Giant Mouse Jutland
Reply #3 on: April 17, 2026, 09:11:32 AM
That is rather a handsome knife.


 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $115.65
PayPal Fees: $7.03
Net Balance: $108.62
Below Goal: $191.38
Site Currency: USD
36% 
April Donations

Community Links


Powered by EzPortal