Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Talk about dedicated splitting-axe

Offline Tarrodemierda

  • No Life Club
  • ******
    • Posts: 3,699
  • Smells like tar and smoke.
Talk about dedicated splitting-axe
on: December 03, 2008, 10:19:44 AM
this is one hellova axe,no matte rits  limited using range,its very powerful tool.but its expensve too,some 180 euros here.just check out the home page,theres a video of the axe doing its job.

http://www.vipukirves.fi/  (it translates as LEVERaxe )


us Offline hawkchucker

  • *
  • *
  • No Life Club
  • ******
    • Posts: 4,783
  • I miss Benner
Re: Talk about dedicated splitting-axe
Reply #1 on: December 03, 2008, 10:29:56 AM
Neet, but look at the torque put on his wrist. That thign whike it works, I would not want to use it for a long session of splitting.

Neet though!
S


scotland Offline Gareth

  • Admin Team
  • Point Of No Return
  • *
    • Posts: 36,686
Re: Talk about dedicated splitting-axe
Reply #2 on: December 03, 2008, 04:12:39 PM
Wow that really is quite impressive. :o  I think that HC is right though, it has to be twisting in his hands and putting a fair bit of strain on the wrists.  At least you don't have to work with it long, it goes through those rounds in no time.  :)
Be excellent to each other and always know where your towel is.


Offline specialist

  • Newbie
  • *
    • Posts: 10
Re: Talk about dedicated splitting-axe
Reply #3 on: December 03, 2008, 09:01:58 PM
Neet, but look at the torque put on his wrist. That thign whike it works, I would not want to use it for a long session of splitting.

Neet though!
I would be very pleased as an inventor, if you would spend some time in my website. There is a lot of information about this new way to split the firewood easy and very safely. The splitting tecnique is totally different comparing to the conventional axes. With LEVERAXE splitting you hold the handle only very gently in your hands so that the handle can rotate in your hands at the end of the strike. You will not hurt your wrists at all.There is almost NO friction, the axeblade never sticks into the block. The blade never hurts yourself, because the blade always stops ON the block, never goes through. Still it spreads the split up to 8 centimeters (3,5 inc). I could write a book about this new tool, but it is all ready in my bewsite. Make yourself aquainted with this new fantastic way to make firewood.
I wish you all the best from Finland
www.vipukirves.fi
« Last Edit: December 03, 2008, 09:35:58 PM by specialist »


Offline max6166

  • No Life Club
  • ******
    • Posts: 1,547
Re: Talk about dedicated splitting-axe
Reply #4 on: December 03, 2008, 09:43:41 PM
That is amazing! Great invention!  :salute: :cheers:
[


gb Offline Mike, Lord of the Spammers!

  • Chief of the Absolutely No Life Club!
  • *
  • Abandon All Hope Ye Who Enter Here...
  • ***********
    • Posts: 42,975
  • Why haven't you got a Farmer yet!
Re: Talk about dedicated splitting-axe
Reply #5 on: December 03, 2008, 10:01:10 PM
Neet, but look at the torque put on his wrist. That thign whike it works, I would not want to use it for a long session of splitting.

Neet though!
I would be very pleased as an inventor, if you would spend some time in my website. There is a lot of information about this new way to split the firewood easy and very safely. The splitting tecnique is totally different comparing to the conventional axes. With LEVERAXE splitting you hold the handle only very gently in your hands so that the handle can rotate in your hands at the end of the strike. You will not hurt your wrists at all.There is almost NO friction, the axeblade never sticks into the block. The blade never hurts yourself, because the blade always stops ON the block, never goes through. Still it spreads the split up to 8 centimeters (3,5 inc). I could write a book about this new tool, but it is all ready in my bewsite. Make yourself aquainted with this new fantastic way to make firewood.
I wish you all the best from Finland
www.vipukirves.fi
Welcome to the forum mate :)
Give in, buy several Farmer's!!!!!!


us Offline hawkchucker

  • *
  • *
  • No Life Club
  • ******
    • Posts: 4,783
  • I miss Benner
Re: Talk about dedicated splitting-axe
Reply #6 on: December 03, 2008, 10:24:19 PM
SpeSmurfpillst. I will certainly look more into this. How did you come up with the Design? The axx is mans oldest tool, and is really unchanged in history. How did you think of this!
S


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 85,986
Re: Talk about dedicated splitting-axe
Reply #7 on: December 04, 2008, 07:07:35 PM
Welcome to the forum SpeSmurfpillst :salute:

Will have to check out your site :tu:


Offline specialist

  • Newbie
  • *
    • Posts: 10
Re: Talk about dedicated splitting-axe
Reply #8 on: December 04, 2008, 07:23:58 PM
SpeSmurfpillst. I will certainly look more into this. How did you come up with the Design? The axx is mans oldest tool, and is really unchanged in history. How did you think of this!
Hello
Thank you for your interest towards this invention. Starting from the very begining I want to say that I have more than 60 years experience in using different kind of axes, mainly in purpose to split the firewood. Sometimes 20 years ago, when I bought this property, where I live at the moment, I had to cut down a lot of different kind of trees. I did not want to spoil the environment with big mashines and that is why I had to do the work by hand. I considered the conventional axes very dangerous and hard to work with. It was many times very close to an accident during my work. So I started to think. Why nobody has developed the axe. In prinsible the conventional axe is still the same wedge that the stoneage man greated around four million years ago. Today the manufacture makes the same wedge of iron. So, where is the development? Difficult to find. There is still a chanse to hit to your foot with each strike, because there are not any safety elements. You take the risk with every strike.
The LEVERAXE has sertain safety elements that makes the splitting nearly 100% safe. So far during this three years there has happened NO accident. The form of the blade is designed so, that the axeblade remains ON the block after EVERY strike or at least slows down speed so much that you can fully controll it. The form is eccentric, the point of gravity, is aside of the striking line. This means that the sertain laws of physics step into the game at the time when the blade touches the block and makes the blade to lean to the right in a fraction of a second with the result that it penetrates to the wood only 5 millimeters , around a quarter of an inc, but still spreads the split out of the block up to 8 centimeters (3,5 inc). Then the axeblade stops ON the block. It will NOT continue it's way to the foot of man/ woman. This mechanism does not take away any power to the friction. This may be difficult to understand, but for further information you can find a lot from my website www.vipukirves.fi
The main answer to your queston is: Thinking a lot, makeing prototypes, testing, thinking , makeing prototypes, testing...........etc.
Try to think different, forget the old way to split, try to understand this new way. After getting aquainted to this new idea, I quarantee, that your future splittings will bee full of joy, safety and effeciency.
I wish you all safe future.
Regards Heikki, the inventor. 
PS. Two slogans : Splitting with a conventional axe is like driwing a car without brakes.
                         Do you fasten the safetybelts before or after the accident?
The LEVERAXE has buildt in brakes and safetybelts, so you do not have to worry about possible accident.
 
 
« Last Edit: December 04, 2008, 09:24:13 PM by specialist »


gb Offline Roadie

  • No Life Club
  • ******
    • Posts: 4,532
  • Hello...is this thing on?
Re: Talk about dedicated splitting-axe
Reply #9 on: December 04, 2008, 07:48:24 PM
That really is an ingenious solution :) Well done!! 8)
Life is like a sandwich...the older it gets the crustier it becomes!


00 Offline Freudian Frog

  • No Life Club
  • ******
    • Posts: 4,230
  • I just don't know what went wrong.
Re: Talk about dedicated splitting-axe
Reply #10 on: December 04, 2008, 09:32:07 PM
Bloody brilliant! How do I get one over here? :D
Got those frog legs.


us Offline NutSAK

  • Admin Team
  • *
  • *
  • Absolutely No Life Club
  • *
    • Posts: 8,369
Re: Talk about dedicated splitting-axe
Reply #11 on: December 05, 2008, 03:40:48 PM
I need one of those!  I split a lot of wood each year for my wood stove, and just a couple of weeks ago I cut into the top of my boot with a standard splitting axe.
- Terry


00 Offline Dtrain

  • Hero Member
  • *****
    • Posts: 903
  • "Southbound Whatchya Leave Behind Ya?"
Re: Talk about dedicated splitting-axe
Reply #12 on: December 05, 2008, 04:16:47 PM
I think that it is really neat. In my younger days I used to deal with alot of firewood to make some extra cash. I used a maul quite a bit since for me at 19-24 years old it was alot quicker than a gas powered splitter. I ain't no Paul Bunyon, but I have put up my fair share of wood. When I looked at your axe, at first I could not figure out how it would work, or be safe, but after watching the video and observing the , I guess unorthodox striking technique, it all made sense. I don't put up wood anymore, I help my Pops out now and again with his woodstove feeding, but he likes his splitter. At 65 and one heart attack followed by a quad bypass I don't blame him.

Out of curiousity, what does your maul run for delivered to US?, I'm ashamed to say that I am a bit inadequate converting euros to dollars.

In Closing, welcome to the forum and that is one really cool outside the box aproach to coming up with a better splitting maul!

Dtrain
"It seemed Like a Good Idea at the Time"


Offline specialist

  • Newbie
  • *
    • Posts: 10
Re: Talk about dedicated splitting-axe
Reply #13 on: December 05, 2008, 05:29:05 PM
I think that it is really neat. In my younger days I used to deal with alot of firewood to make some extra cash. I used a maul quite a bit since for me at 19-24 years old it was alot quicker than a gas powered splitter. I ain't no Paul Bunyon, but I have put up my fair share of wood. When I looked at your axe, at first I could not figure out how it would work, or be safe, but after watching the video and observing the , I guess unorthodox striking technique, it all made sense. I don't put up wood anymore, I help my Pops out now and again with his woodstove feeding, but he likes his splitter. At 65 and one heart attack followed by a quad bypass I don't blame him.

Out of curiousity, what does your maul run for delivered to US?, I'm ashamed to say that I am a bit inadequate converting euros to dollars.

In Closing, welcome to the forum and that is one really cool outside the box aproach to coming up with a better splitting maul!

Dtrain

Thank you for your comment. The LEVERAXE will cost in US 203 EUR, this equals 256.19 USD. The price includes the shipping. www.easyconverter.net
The AXE can be ordered in my netshop www.vipukirves.fi. Secect English pages, (Flag on the upper right corner), select SHOP. Here you can find all the required information. Follow the orders. Make your order. You will get the AXE in a good week. Hope to see you in my onlineSHOP, the choise for safe future is yours. This AXE has been on the market over three years, during this time there has happened NO ACCIDENT.
All the best from Finland.
Regards Heikki
www.vipukirves.fi


Offline specialist

  • Newbie
  • *
    • Posts: 10
Additional information
Reply #14 on: October 29, 2009, 10:49:30 AM
Hi

The LEVERAXE has been on the market four years time. NO ACCIDENT.

Something new to look at:
The longest chopper block of the world.
The first rotating chopper block in the world.
A lot more to see.
www.vipukirves.fi/english/vipukirves_videos.htm

All the best from Finland
Regards Heikki, the inventor
:b2t:


ca Offline Chako

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 21,130
  • Armed with camera and not afraid to use it.
Re: Talk about dedicated splitting-axe
Reply #15 on: January 02, 2010, 12:36:04 PM
I don't normally look in this forum...but I must say, absolutely brilliant.

Any location where I can buy this axe in Canada? I have a friend who could use this axe badly.
A little Leatherman information.

Leatherman series articles


ca Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • *
  • Just Bananas
  • *
    • Posts: 65,935
  • Optimum instrumentum est inter aures
Re: Talk about dedicated splitting-axe
Reply #16 on: January 02, 2010, 06:00:11 PM
Your best bet is to check one of the numerous links he posted without even asking permission.  I don't think either SpeSmurfpillst nor Tarrodemierda frequent this forum any more, so I strongly doubt you will get any new information.

Good luck though, and if you find out where to get one here, please let me know too as I may have to get one too!

Def
Leave the dents as they are- let your belongings show their scars as proudly as you do yours.


ca Offline Chako

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 21,130
  • Armed with camera and not afraid to use it.
Re: Talk about dedicated splitting-axe
Reply #17 on: January 02, 2010, 11:59:16 PM
Oh lol. I just noticed the thread is several years old. Dang. I need to pay more attention.
A little Leatherman information.

Leatherman series articles


gb Offline Screwtape

  • Hero Member
  • *****
    • Posts: 987
  • I am the Toast King!!
Re: Talk about dedicated splitting-axe
Reply #18 on: January 03, 2010, 11:20:11 AM
Oh lol. I just noticed the thread is several years old. Dang. I need to pay more attention.

I'm glad you did, I'd never have found this myself if you hadn't.

Cheers Chako  :tu:
"Hello! I am the Toast King and I rule over the Moon!"


Offline SteveRacer

  • Full Member
  • ***
    • Posts: 209
  • Mary had a little lamb. With mint jelly and mashed
Re: Talk about dedicated splitting-axe
Reply #19 on: February 09, 2010, 10:07:03 AM
The old tire around the log idea from the video is a great one, even if I can't afford the axe.

Brilliant thinking, but I'm still not convinced it's not a repetitive-stress injury in the making.  I can't imagine there's a way to hold the handle "gently" if the head has any heft at all.  Seems like a firm grip would be a safe grip when splitting with any tool, and that torsion has to go back into the body somewhere.  You can create devestating injury with a just computer keyboard and a mouse; I'd be hard pressed to believe the ergonomic neutrality of an axe that is so efficient.  On the other hand, unless you're splitting on a daily basis, the risk of injury is probably much greater from the axe splitting through and catching a foot or shin.

I'd also like to see how it performs on something knotty, gnarly, gummy, and unseasoned.

Not trying to bash the invention or the inventor -- I deeply respect anyone that thinks outside the box, and has the ambition and conviction to follow through with producing a viable design.

-steve
[


Offline specialist

  • Newbie
  • *
    • Posts: 10
Re: Talk about dedicated splitting-axe
Reply #20 on: February 10, 2010, 10:46:56 PM
The old tire around the log idea from the video is a great one, even if I can't afford the axe.

Brilliant thinking, but I'm still not convinced it's not a repetitive-stress injury in the making.  I can't imagine there's a way to hold the handle "gently" if the head has any heft at all.  Seems like a firm grip would be a safe grip when splitting with any tool, and that torsion has to go back into the body somewhere.  You can create devestating injury with a just computer keyboard and a mouse; I'd be hard pressed to believe the ergonomic neutrality of an axe that is so efficient.  On the other hand, unless you're splitting on a daily basis, the risk of injury is probably much greater from the axe splitting through and catching a foot or shin.

I'd also like to see how it performs on something knotty, gnarly, gummy, and unseasoned.

Not trying to bash the invention or the inventor -- I deeply respect anyone that thinks outside the box, and has the ambition and conviction to follow through with producing a viable design.

-steve

It is a MUST to hold the handle gently, other wise the blade cannot rotate. The blade will NOT continue to your foot.
Over four years on the market. NO ACCIDENT.
« Last Edit: July 20, 2010, 10:49:09 PM by Mike, Lord of the Spammers! »


Offline specialist

  • Newbie
  • *
    • Posts: 10
Re: Talk about dedicated splitting-axe
Reply #21 on: July 09, 2010, 09:58:05 AM
The old tire around the log idea from the video is a great one, even if I can't afford the axe.

Brilliant thinking, but I'm still not convinced it's not a repetitive-stress injury in the making.  I can't imagine there's a way to hold the handle "gently" if the head has any heft at all.  Seems like a firm grip would be a safe grip when splitting with any tool, and that torsion has to go back into the body somewhere.  You can create devestating injury with a just computer keyboard and a mouse; I'd be hard pressed to believe the ergonomic neutrality of an axe that is so efficient.  On the other hand, unless you're splitting on a daily basis, the risk of injury is probably much greater from the axe splitting through and catching a foot or shin.

I'd also like to see how it performs on something knotty, gnarly, gummy, and unseasoned.

Not trying to bash the invention or the inventor -- I deeply respect anyone that thinks outside the box, and has the ambition and conviction to follow through with producing a viable design.

-steve

It is a MUST to hold the handle gently, other wise the blade cannot rotate. The blade will NOT continue to your foot.
Over four years on the market. NO ACCIDENT.

More to look at.

 :cheers:
« Last Edit: July 20, 2010, 10:49:41 PM by Mike, Lord of the Spammers! »


gb Offline ryan1835

  • Absolutely No Life Club
  • *******
    • Posts: 5,223
  • buh
Re: Talk about dedicated splitting-axe
Reply #22 on: July 16, 2010, 11:31:33 PM
pssst


id talk to grant before advertising any more  ;)  ::)
I


Offline specialist

  • Newbie
  • *
    • Posts: 10
Re: Talk about dedicated splitting-axe
Reply #23 on: July 20, 2010, 10:35:17 PM
pssst


id talk to grant before advertising any more  ;)  ::)

pssst to yourself

Thank you very much for the advise. I hope that you have learned something about my writings. :twak:


gb Offline Mike, Lord of the Spammers!

  • Chief of the Absolutely No Life Club!
  • *
  • Abandon All Hope Ye Who Enter Here...
  • ***********
    • Posts: 42,975
  • Why haven't you got a Farmer yet!
Re: Talk about dedicated splitting-axe
Reply #24 on: July 20, 2010, 10:39:52 PM
pssst


id talk to grant before advertising any more  ;)  ::)

pssst to yourself

Thank you very much for the advise. I hope that you have learned something about my writings. :twak:
As it happens Ryan's is right.
Pm incoming...
Give in, buy several Farmer's!!!!!!


Offline specialist

  • Newbie
  • *
    • Posts: 10
Re: Talk about dedicated splitting-axe
Reply #25 on: August 15, 2010, 08:00:39 PM
pssst


id talk to grant before advertising any more  ;)  ::)

pssst to yourself

Thank you very much for the advise. I hope that you have learned something about my writings. :twak:
As it happens Ryan's is right.
Pm incoming...

Thank you for the e-mail.
I have given an opportunity to the people. I have never said. "BUY this AXE". I have only tried to explain the functions of my invention. I fully understand that everybody wants to make his money, but this is my hobby . I have got a gift somewhere, why should I hide this information from the people. Thousands of people hurt themselves every year. In the conventional axe or maul are NO safety elements. Each strike can injure the user.
Leveraxe is the very first hand operational wood splitting apparatus, where the safety elements have been done beforehand to the structure of the axe so that nobody could hurt himself.
The Leveraxe has been on the market nearly five years. During this era there has happened NO ACCIDENT. At the same era only in Finland has happened over 25.000 different accidents with the conventional axes (wedge).
I think that it is not question if Ryan right or wrong. The question is about the general safety and better value of individuals lives.
I never came to these pages, but I found some sceptics thoughts which I wanted to correct.
I used to be as an air traffic controller. I have been on pension over 15 years. My pension is good enough to support me and my wife. I do not need any extra money. I only want to make life a little bit better for the people who realizes the advantages of this invention. In case you have something against this kind if thinking it is totally your choice, but what do you gain out of it.
I wish you all all the best from Finland  and I wish I haven't caused any bad feelings to anybody.
Regards
Heikki, the inventor, born 1940. :cheers:


us Offline Outback in Idaho

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,315
  • Not all those who wander are lost.
Re: Talk about dedicated splitting-axe
Reply #26 on: May 28, 2016, 07:28:14 AM
pssst


id talk to grant before advertising any more  ;)  ::)

pssst to yourself

Thank you very much for the advise. I hope that you have learned something about my writings. :twak:
As it happens Ryan's is right.
Pm incoming...

Thank you for the e-mail.
I have given an opportunity to the people. I have never said. "BUY this AXE". I have only tried to explain the functions of my invention. I fully understand that everybody wants to make his money, but this is my hobby . I have got a gift somewhere, why should I hide this information from the people. Thousands of people hurt themselves every year. In the conventional axe or maul are NO safety elements. Each strike can injure the user.
Leveraxe is the very first hand operational wood splitting apparatus, where the safety elements have been done beforehand to the structure of the axe so that nobody could hurt himself.
The Leveraxe has been on the market nearly five years. During this era there has happened NO ACCIDENT. At the same era only in Finland has happened over 25.000 different accidents with the conventional axes (wedge).
I think that it is not question if Ryan right or wrong. The question is about the general safety and better value of individuals lives.
I never came to these pages, but I found some sceptics thoughts which I wanted to correct.
I used to be as an air traffic controller. I have been on pension over 15 years. My pension is good enough to support me and my wife. I do not need any extra money. I only want to make life a little bit better for the people who realizes the advantages of this invention. In case you have something against this kind if thinking it is totally your choice, but what do you gain out of it.
I wish you all all the best from Finland  and I wish I haven't caused any bad feelings to anybody.
Regards
Heikki, the inventor, born 1940. :cheers:

    Just caught wind of the LeverAxe in a video, and there is a website for this interesting axe.
   
    https://youtu.be/SaEHuDsSVog
¬ Outback in Idaho

Behind every mask there is a face, behind that a story.


scotland Offline Gareth

  • Admin Team
  • Point Of No Return
  • *
    • Posts: 36,686
Re: Talk about dedicated splitting-axe
Reply #27 on: May 28, 2016, 02:19:56 PM
Not having a pop at you Jim, but that video "review" is nothing of the sort.  That's a sales pitch. >:(  I would actually love to hear or read a genuine, independent review.

As many folks have already said in this thread I remain unconvinced that this isn't a quick route to RSI nor that it's going to be of any great advantage in anything other than ideal splitting conditions.
Be excellent to each other and always know where your towel is.


scotland Offline Gareth

  • Admin Team
  • Point Of No Return
  • *
    • Posts: 36,686
Re: Talk about dedicated splitting-axe
Reply #28 on: May 28, 2016, 02:28:16 PM
Be excellent to each other and always know where your towel is.


ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: Talk about dedicated splitting-axe
Reply #29 on: May 28, 2016, 02:48:46 PM
That version. 2 looks horribly flimsy to me.  I'd rather have a maul.

Innovation is a great thing but if what you come up with isn't better then you go back and try again.

PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard


 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links


Powered by EzPortal