Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Victorinox CyberChamp Lite

Dutch_Tooler · 42 · 2009
« previous next »
Pages: 1 2   Go Down

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,360
Victorinox CyberChamp Lite
on: December 27, 2018, 03:47:23 PM
Following up from a now no longer aptly named thread, I present the most recent creation spawned by my twisted and debatably creative mind.

The discerning user will note the 93mm inline awl and the electrician's blade. The latter shares a layer with a small blade, which had to give op its usual place for the awl. The originally foreseen pruner blade was dropped.

Otherwise it's a blend of the CyberTool Lite and Ranger tool complements. It kind of reminds of a SwissChamp with cyberbits and light, minus the fish scaler and with replacement of the corkscrew with a fixed Phillips. The backspring awl was retained.

My plan was to create a pocketable toolbox with as much versatility as possible, without going all the way (and the cost) to an XLT or even an XAVT.

I also added small tweezers in the scale slot provided.
11272018152724.jpg
* 11272018152724.jpg (Filesize: 446.58 KB)
11272018152737.jpg
* 11272018152737.jpg (Filesize: 426.83 KB)
1127201815283.jpg
* 1127201815283.jpg (Filesize: 413.22 KB)
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: Victorinox CyberChamp Lite
Reply #1 on: December 27, 2018, 04:06:54 PM
Wow excellent work D_T :cheers:
I like the tools you have selected for your SAK :like:
Would like to see some more pics of the tools  :popcorn:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,360
Re: Victorinox CyberChamp Lite
Reply #2 on: December 27, 2018, 04:23:49 PM
Thanks Wim :hatsoff:

Will do, but first some production pics.
11272018161825.jpg
* 11272018161825.jpg (Filesize: 503.16 KB)
1127201816194.jpg
* 1127201816194.jpg (Filesize: 563.15 KB)
11272018161947.jpg
* 11272018161947.jpg (Filesize: 498.09 KB)
11272018162022.jpg
* 11272018162022.jpg (Filesize: 488.5 KB)
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,360
Re: Victorinox CyberChamp Lite
Reply #3 on: December 27, 2018, 04:24:25 PM
...
11272018162045.jpg
* 11272018162045.jpg (Filesize: 495.74 KB)
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

nl Offline Mactire404

  • *
  • Hero Member
  • *****
    • Posts: 842
  • There's a SAK for that!
Re: Victorinox CyberChamp Lite
Reply #4 on: December 27, 2018, 04:35:26 PM
Quote from: Dutch_Tooler on December 27, 2018, 03:47:23 PM
Following up from a now no longer aptly named thread, I present the most recent creation spawned by my twisted and debatably creative mind.

The discerning user will note the 93mm inline awl and the electrician's blade. The latter shares a layer with a small blade, which had to give op its usual place for the awl. The originally foreseen pruner blade was dropped.

Otherwise it's a blend of the CyberTool Lite and Ranger tool complements. It kind of reminds of a SwissChamp with cyberbits and light, minus the fish scaler and with replacement of the corkscrew with a fixed Phillips. The backspring awl was retained.

My plan was to create a pocketable toolbox with as much versatility as possible, without going all the way (and the cost) to an XLT or even an XAVT.

I also added small tweezers in the scale slot provided.

Double the tweezers double the fun!

What did you do with the front scale? If you move the tweezers to the back you can use plain scales on the front.
Otherwise you can add an extra pair of tweezers or, like I planned but didn't get to, a firefly fire rod.
« Last Edit: December 27, 2018, 04:37:27 PM by Mactire404 »
My SAK collection and more: http://pocketknives.home.blog
Merit Badges Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 5 different 111mm models in your collection Must start a thread with a photo of your stayglow SAK Must start a thread with a photo of your birth year SAK Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams.

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: Victorinox CyberChamp Lite
Reply #5 on: December 27, 2018, 04:43:15 PM
Great pics shows the Layers nicely  :tu:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,360
Re: Victorinox CyberChamp Lite
Reply #6 on: December 27, 2018, 04:55:02 PM
@Mactire, I just left the original scale and tweezers. But on my Swisschamp I have replaced it with the toothpick which was replaced with a Firefly. I can simply swap the setups whenever I want.

@Wspeed: thanks :tu:
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

us Offline CallsignBadger

  • *
  • No Life Club
  • ******
    • Posts: 3,253
  • Honey Badger Don't Care
Re: Victorinox CyberChamp Lite
Reply #7 on: December 27, 2018, 07:08:15 PM
Nice build  :like:
~CsB
Merit Badges Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread with a photo of your EDC watch

pt Offline FInixNOver

  • Hero Member
  • *****
    • Posts: 825
Re: Victorinox CyberChamp Lite
Reply #8 on: December 27, 2018, 08:18:08 PM
Nice work and sak you got there D_T! :like: :tu:

Sent from my Redmi Note 5

Merit Badges Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC

se Offline RF52

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,772
Re: Victorinox CyberChamp Lite
Reply #9 on: December 27, 2018, 09:06:36 PM
Great job, looks awesome :like: :drool:

Sent fra min FRD-L09 via Tapatalk

Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a 'folding hunter' knife that isn't a Buck 110 for thirty (30) consecutive days. Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the multitool for seven (7) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread with photos of your slasher/chopper/machete knives in use Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,360
Re: Victorinox CyberChamp Lite
Reply #10 on: December 27, 2018, 09:49:07 PM
Thanks guys :salute:
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

us Offline twiliter

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,520
  • motionless wheel, nothing is real
Re: Victorinox CyberChamp Lite
Reply #11 on: December 28, 2018, 12:12:48 AM
Good one DT, looks like it's going to be a fun challenge!  :like:
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Start a thread with photos of at least five different colored ALOX models in your collection Must start a thread with a photo of your birth year SAK Start a new thread with a photo showing the Hook in use

us Offline pa_strunk

  • *
  • *
  • No Life Club
  • ******
    • Posts: 1,656
  • MAJ/APA
Re: Victorinox CyberChamp Lite
Reply #12 on: December 28, 2018, 02:32:32 AM
 :like:
"Every generation has the obligation to free men's minds for a look at new worlds, to look out from a higher plateau than the last generation." Ellison Onizuka
Merit Badges Participate and post a pic of your vintage SAK (1986 or earlier) everyday for 30 days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Start a thread with a photo of at least ten OPT's in your collection Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Participate  in Challenge thread and post a photo of a Delemont SAK for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread with a photo of at least 5 different Charge models in your collection Start a thread with photos of at least 12 different Juice models in your collection Must start a thread showing a photo of at least eight BO tools Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,360
Re: Victorinox CyberChamp Lite
Reply #13 on: December 28, 2018, 12:17:06 PM
Thanks, if I'm allowed in with this that is :D

11282018121636.jpg
* 11282018121636.jpg (Filesize: 727.55 KB)
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: Victorinox CyberChamp Lite
Reply #14 on: December 28, 2018, 12:19:15 PM
I can’t see why not
We have had modded waves in the Wave challenge  :think:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

nl Offline Mactire404

  • *
  • Hero Member
  • *****
    • Posts: 842
  • There's a SAK for that!
Re: Victorinox CyberChamp Lite
Reply #15 on: December 28, 2018, 06:40:44 PM
Really cool, and I like the toolset!
My SAK collection and more: http://pocketknives.home.blog
Merit Badges Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 5 different 111mm models in your collection Must start a thread with a photo of your stayglow SAK Must start a thread with a photo of your birth year SAK Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams.

00 Offline Borg

  • *
  • No Life Club
  • ******
    • Posts: 2,447
Re: Victorinox CyberChamp Lite
Reply #16 on: December 28, 2018, 08:36:25 PM
Nice mod  :like:
Poker Face Milk dud world champion 2021
Merit Badges Participate in a Challenge thread and post a photo of a 'folding hunter' knife that isn't a Buck 110 for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for seven (7) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo showing the axe in use Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,360
Re: Victorinox CyberChamp Lite
Reply #17 on: January 02, 2019, 04:06:35 PM
Thanks guys :tu:

I also like the tool complement.
However, the layout is not perfect yet... the layer with the electrician and small blades is a bit difficult to reach, and in addition it has turned out a bit tight for my liking, as if the spring I used (the one for a fish scaler, ground to accept the 2nd pivot) were just a tiny bit too narrow to keep the liners apart sufficiently for smooth tool action. In addition, retraction of the blades is hindered somewhat by their being exactly aligned. When I get around to it I might rebuild the knife with the blades layer somewhere else, e.g. between file and saw, and the spring replaced by one from an opener layer and some spacers added to opposite sides of the respective tangs. That gives me space for an additional small screwdriver, come to think of it... :think:
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: Victorinox CyberChamp Lite
Reply #18 on: January 02, 2019, 04:49:39 PM
Hopefully you will be able
to get it the way you want D_T :tu:

It is a lot of tools that all have to work together
But it sounds like you have already
thought of ways to fix the problems

Look forward to see what you come up with  :popcorn:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,006
Re: Victorinox CyberChamp Lite
Reply #19 on: January 02, 2019, 07:59:18 PM
Great mod, DT :tu: a really do all SAK :tu: :like:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,360
Re: Victorinox CyberChamp Lite
Reply #20 on: January 02, 2019, 09:02:21 PM
Thanks all. Yes, versatility was the main objective...
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: Victorinox CyberChamp Lite
Reply #21 on: January 03, 2019, 10:41:44 AM
Lovely work DTc :cheers: Looks well useful!
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,360
Re: Victorinox CyberChamp Lite
Reply #22 on: January 03, 2019, 11:25:27 AM
Thanks! High praise indeed :hatsoff:
To paraphrase you, this may look a tad like a CyberClump Lite, but appearances can be deceiving - it's bulky rather than extremely heavy but even so, it sits well in the pocket next to my equally clumpy keys-in-pouch.
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

id Offline jaya_man

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,012
Victorinox CyberChamp Lite
Reply #23 on: January 03, 2019, 01:07:52 PM
Oh wow... awesome build D_T... :like:

I recently built something similar as well... Bladeless CyberChamp...
Merit Badges Must start a thread showing a photo of at least five BO tools You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the copper flashlight for thirty (30) consecutive days. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: Victorinox CyberChamp Lite
Reply #24 on: January 03, 2019, 01:24:35 PM
Quote from: Dutch_Tooler on January 03, 2019, 11:25:27 AM
Thanks! High praise indeed :hatsoff:
To paraphrase you, this may look a tad like a CyberClump Lite, but appearances can be deceiving - it's bulky rather than extremely heavy but even so, it sits well in the pocket next to my equally clumpy keys-in-pouch.
Cyberclump Lite  :rofl: Vic should definitely use that name.
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: Victorinox CyberChamp Lite
Reply #25 on: January 03, 2019, 02:20:41 PM
Quote from: jaya_man on January 03, 2019, 01:07:52 PM
Oh wow... awesome build D_T... :like:

I recently built something similar as well... Bladeless CyberChamp...
Nice build jaya :dd: :like:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

id Offline jaya_man

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,012
Re: Victorinox CyberChamp Lite
Reply #26 on: January 03, 2019, 02:48:57 PM
Thanks Wim :cheers:
Merit Badges Must start a thread showing a photo of at least five BO tools You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the copper flashlight for thirty (30) consecutive days. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

us Offline Obi1shinobee

  • Absolutely No Life Club
  • *******
    • Posts: 6,661
  • Master LM Squirt Ps4 And Lord of Navitools
Re: Victorinox CyberChamp Lite
Reply #27 on: January 03, 2019, 03:19:15 PM
I  :like:but i want Serrated blade add on and marlin spike  :ahhh :ahhh :ahhh
Merit Badges Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the copper flashlight for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,360
Re: Victorinox CyberChamp Lite
Reply #28 on: January 03, 2019, 03:22:20 PM
Thanks all - and I like your CyberChamp jaya_man :tu: (about that name - great minds think alike, eh? :D)

As serendipity has it, Obi, I - vaguely - have a mod in mind with a serrated blade and a marlin spike. Early days yet...  :think: :think: :think:
« Last Edit: January 03, 2019, 03:26:01 PM by Dutch_Tooler »
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

id Offline jaya_man

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,012
Victorinox CyberChamp Lite
Reply #29 on: January 03, 2019, 03:23:41 PM
My build was a long time overdue... hahaha... will let it stay bladeless for now... Am anticipating my eldest wanting to play with it... :cheers:
Merit Badges Must start a thread showing a photo of at least five BO tools You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the copper flashlight for thirty (30) consecutive days. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

Pages: 1 2   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $152.99
PayPal Fees: $8.68
Net Balance: $144.31
Below Goal: $155.69
Site Currency: USD
48% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal