Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


CyberTool Family Complete!

Max Stone · 33 · 847
« previous next »
Pages: 1 2   Go Down

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
CyberTool Family Complete!
on: August 12, 2019, 08:35:48 PM
Completed the CyberTool family today with the CyberTool M (aka CT-34). Now have all 4 models...the others being the CyberTool S (CT-29), CyberTool L (CT-41) and CyberTool Lite.  :woohoo:

Swapped all to solid blue Vic plus scales as a small differentiator for the range...and kinda looks cool.  :D

Showing the replaced red transparent scale for anyone interested in the stamp markings. Seems the shield scale is stamped 14 while the back scale has a circular marking pointing at 16.

My favourite of the 4 is the CyberTool Lite, as it has the magnifier and LED. A good modern alternative for the SwissChamp...but not quite as iconic.  :think:

Not shown, but I have a CT-50 too...aka SwissChamp XLT. But I’ll leave this with the original scales...for the moment.  :whistle:

It’s been real fun collecting this series and giving them a little personality.

In the 1st pic from top, 3-layer CT-29 (bit driver, blades layer, opener layer only), 5-layer CT-34 (adds scissors and pliers), 6-layer CT-Lite (adds LED and magnifier), and 7-layer CT-41 (no LED/mag, but adds wood saw and file).
57344CCB-038B-41D6-B931-954F2807FDC6.jpeg
* 57344CCB-038B-41D6-B931-954F2807FDC6.jpeg (Filesize: 345.51 KB)
B3B4459E-60BC-4066-9BB4-BD390674A44F.jpeg
* B3B4459E-60BC-4066-9BB4-BD390674A44F.jpeg (Filesize: 303.05 KB)
CC1EA23C-DAF0-4ABC-B9B4-C3801224F059.jpeg
* CC1EA23C-DAF0-4ABC-B9B4-C3801224F059.jpeg (Filesize: 199.75 KB)
BBD5F1AA-B2AC-44BE-8BD4-C6593EBEA579.jpeg
* BBD5F1AA-B2AC-44BE-8BD4-C6593EBEA579.jpeg (Filesize: 244.75 KB)
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

us Offline gerleatherberman

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,549
  • Man of Multiple MultiTool Manufacturers
Re: CyberTool Family Complete!
Reply #1 on: August 12, 2019, 09:01:30 PM
Very very nice CyberTool selection, Max! :dd:
Pontificating particularly pious positions pertaining to polymorphic paraphernalia. G-Man.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of at least 5 different Charge models in your collection Start a new thread and post a photo of the multitool for seven (7) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your astronomy gear with a multitool Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Must start a thread with a photo of at least five (5) of your watches Must buy an item through the MTo Store Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

00 Offline Mechanickal

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,686
Re: CyberTool Family Complete!
Reply #2 on: August 12, 2019, 09:03:23 PM
Cool!

But I have to ask...

What about the XAVT? :pok:

Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread with a photo of your stayglow SAK Start a new thread with a photo showing the Hook in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your Buck knives in use Must put something in order and provide link to the post. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread with photos of your chainsaws Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore Must start a thread with a photo of your birth year SAK Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Must start a thread with a photo of at least five (5) of your watches

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: CyberTool Family Complete!
Reply #3 on: August 12, 2019, 09:05:41 PM
Haha! Yes...the CT-80  :pok:

Counts for 2 x CyberTools, yes?
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: CyberTool Family Complete!
Reply #4 on: August 12, 2019, 09:08:38 PM
Quote from: gerleatherberman on August 12, 2019, 09:01:30 PM
Very very nice CyberTool selection, Max! :dd:
Thank you GLBM. Now just the XAVT as Mechanickal points out  :D

...start saving now...
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

nl Offline Reinier

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,293
  • \o/
Re: CyberTool Family Complete!
Reply #5 on: August 12, 2019, 09:28:01 PM
*cough* XXLT *cough*

https://www.sakwiki.com/tiki-index.php?page=SwissChamp+XXLT

Nice group of CTs though :)
You should seriously visit vicfan.com. All the hoopy froods are doing it.
Merit Badges Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo showing the Hook in use Must sell something on EDCSource Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must update or add a page on SAKWiki Must buy something on EDCSource Start a new thread with a photo of your custom ALOX with scissors Start a new thread with pictures of a Fish Scaler in use Start a new thread with photos of your astronomy gear with a multitool Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start a thread with a photo of your stayglow SAK Must start a thread with a photo of your camo SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least twelve different colored ALOX models in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: CyberTool Family Complete!
Reply #6 on: August 12, 2019, 09:34:40 PM
...mmm...this family is getting expensive!  :facepalm:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

se Offline kottskrapa

  • *
  • No Life Club
  • ******
    • Posts: 3,772
Re: CyberTool Family Complete!
Reply #7 on: August 12, 2019, 09:55:51 PM
Still a nice collection!

[It's not failure if you learn something from it]

Merit Badges Participate in a challenge by carrying  a Combo Edged knife or Multitool and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must start a thread with a photo of your stayglow SAK Start a new thread with photos of your chainsaws Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC

00 Offline Mechanickal

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,686
Re: CyberTool Family Complete!
Reply #8 on: August 12, 2019, 09:56:50 PM
Quote from: Max Stone on August 12, 2019, 09:05:41 PM
Haha! Yes...the CT-80  :pok:

Counts for 2 x CyberTools, yes?
Guess so...

It's a monster...
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread with a photo of your stayglow SAK Start a new thread with a photo showing the Hook in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your Buck knives in use Must put something in order and provide link to the post. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread with photos of your chainsaws Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore Must start a thread with a photo of your birth year SAK Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Must start a thread with a photo of at least five (5) of your watches

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: CyberTool Family Complete!
Reply #9 on: August 12, 2019, 09:58:26 PM
Quote from: kottskrapa on August 12, 2019, 09:55:51 PM
Still a nice collection!

Thanks kottskrapa  :hatsoff:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

so Offline maxt

  • Full Member
  • ***
    • Posts: 161
Re: CyberTool Family Complete!
Reply #10 on: August 12, 2019, 11:00:53 PM
Your collection is far from completion as long as you don't have Beretta or SurfTool (both have special bits).
A complete collection means that Carbon CyberTool is there but as you swap scale that is not relevant.
DSC_3763.JPG
* DSC_3763.JPG (Filesize: 202.65 KB)
DSC_3769.JPG
* DSC_3769.JPG (Filesize: 146.08 KB)
49719603_10217381322035767_4944512225424441344_o.jpg
* 49719603_10217381322035767_4944512225424441344_o.jpg (Filesize: 116.73 KB)
Want to buy:
SwissChamp - 500 Mio
Huntsman - Eidgenossenschaft 700 Year Commemorative
Wenger - FASS 90 Grünig and Elmiger in Green scales

nl Offline Reinier

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,293
  • \o/
Re: CyberTool Family Complete!
Reply #11 on: August 12, 2019, 11:34:54 PM
Good suggestions Maxt. The Surftool should still be readily available in Japan if I'm not mistaken :)
You should seriously visit vicfan.com. All the hoopy froods are doing it.
Merit Badges Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo showing the Hook in use Must sell something on EDCSource Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must update or add a page on SAKWiki Must buy something on EDCSource Start a new thread with a photo of your custom ALOX with scissors Start a new thread with pictures of a Fish Scaler in use Start a new thread with photos of your astronomy gear with a multitool Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start a thread with a photo of your stayglow SAK Must start a thread with a photo of your camo SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least twelve different colored ALOX models in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection

be Offline Ivo

  • *
  • No Life Club
  • ******
    • Posts: 1,944
Re: CyberTool Family Complete!
Reply #12 on: August 12, 2019, 11:36:54 PM
It is still a nice collection you have Max  :drool: :drool: :like: :like:
The Vikings say "when your battle axe is to short do one step forward"
Merit Badges Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a new thread with photos of your Buck knives in use Start a new thread with a photo showing the axe in use Start a new thread with a photo showing the Hook in use Start a new thread with photos of your Mora knives in use Start a new thread with photos of your astronomy gear with a multitool Start a new thread with pictures of a Fish Scaler in use Must buy an item through the MTo Store Start a new thread with photos of your chainsaws Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a picture of fire making kit or fire with a multitool Must update or add a page on the Multitool.org Multitool Encyclopedia Must start a thread showing a photo of at least eight BO tools Must start a thread with a photo of your birth year SAK Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: CyberTool Family Complete!
Reply #13 on: August 12, 2019, 11:51:47 PM
Nice Cybertool family Max  :like: :tu:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

us Offline Myron

  • *
  • No Life Club
  • ******
    • Posts: 2,172
Re: CyberTool Family Complete!
Reply #14 on: August 12, 2019, 11:54:44 PM
Congratulations Max.  Very nice collection and I love the blue scales.   

I’ve never dipped a toe in the waters of the cybertool. I’ve been thinking of checking out a three layer lately, however.  Are the bit drivers useful for working on stuff other than electronics?

Myron
Merit Badges Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Participate  in Challenge thread and post a photo of an Old Cross SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a picture of a fish or fishing kit with a multitool Must start a thread with a photo of your birth year SAK Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo of your custom ALOX with scissors Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the Hook in use Start a new thread demonstrating paracord knot tying Must start a thread with a photo of at least five (5) of your watches

us Offline kamakiri

  • *
  • No Life Club
  • ******
    • Posts: 3,215
Re: CyberTool Family Complete!
Reply #15 on: August 13, 2019, 05:44:03 AM
Nice looking 'uniforms', Max!  :like:

I couldn't change scales on most of mine...at least not the OG '99 models with the solid back scales and no lifter 'lock' nub. Too bad the CT Lites didn't come in '99, though. And the beater/used CT29s make good, cheap mod fodder. CT Lite +MS+back phillips...it's on the to-do list.


Quote from: Myron on August 12, 2019, 11:54:44 PM
Are the bit drivers useful for working on stuff other than electronics?
I think so, but they really are a must for electronics.  Aside from the 58mm combo phillips, the rest of the Vic phillips lineup can't tackle small diameter holes with the slightest recess in electronic plastic cases.  :(
If this post has been helpful in dating your Swiss Army Knife, please consider making a small contribution to help keep SAKWiki going
Merit Badges Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: CyberTool Family Complete!
Reply #16 on: August 13, 2019, 05:59:37 AM
Great collection.  I also stopped at the 4 Cybertools as the whole collection would be very expensive.  I was using my 29 but switched to my 34 and am happy I did so.  Its a great tool.     

Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread and post a picture of fire making kit or fire with a multitool Must have a review written in the proper format and posted on the Main Site Start a new thread with photos of camping, including those showing preferred camping equipment Start a thread with photos of at least 5 different Juice models in your collection Start a thread with a photo of at least ten OPT's in your collection Start a new thread with photos of a Japanese made PST in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: CyberTool Family Complete!
Reply #17 on: August 13, 2019, 06:46:40 AM
Thanks Aloha, kamakiri, Myron, Wim, maxt.  :hatsoff:

Myron, the term ‘CyberTool’ is a bit of a misnomer as the bits are useful for many applications, and apart from bigger slots (that you can use the cap lifter tool for), the bit driver can be used for most general purpose use.  :tu:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

gb Offline Rizio Il Ghiro

  • *
  • No Life Club
  • ******
    • Posts: 4,046
Re: CyberTool Family Complete!
Reply #18 on: August 13, 2019, 12:28:41 PM
Wow, that’s quite a collection, Max! Good to see that there are other models out there I didn’t know about too. I’ve just got a CT34 lite (half price, so I couldn’t resist....) - I’m planning on removing the lite/magnifier layer, shifting the pliers forward to put the bit holder layer in the middle of the 5 remaining layers, then finishing off with emerald + scales to create a CT34. The removed layer I hope to put into the middle of a compact to create my ideal Knife - yeoman with a torch instead of a Philips screwdriver - my ideal EDC Knife: blade, bottle opener, magnifier, torch, scissors and pen/pin/toothpick/tweezers (I’ve also got some Ti+ scales on order from Daily Customs to finish this one off) - just need to pluck up the courage to take them apart......
Merit Badges Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Delemont SAK for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of an Old Cross SAK for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Alox SAK for thirty (30) consecutive days. Participate and post a pic of your vintage SAK (1986 or earlier) everyday for 30 days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year

so Offline maxt

  • Full Member
  • ***
    • Posts: 161
Re: CyberTool Family Complete!
Reply #19 on: August 13, 2019, 01:23:24 PM
Quote from: Reinier on August 12, 2019, 11:34:54 PM
The Surftool should still be readily available in Japan if I'm not mistaken :)
I saw 1 piece on eBay a month ago.
Want to buy:
SwissChamp - 500 Mio
Huntsman - Eidgenossenschaft 700 Year Commemorative
Wenger - FASS 90 Grünig and Elmiger in Green scales

nl Offline Reinier

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,293
  • \o/
Re: CyberTool Family Complete!
Reply #20 on: August 13, 2019, 01:27:09 PM
Here's another one that you're missing :D

You should seriously visit vicfan.com. All the hoopy froods are doing it.
Merit Badges Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo showing the Hook in use Must sell something on EDCSource Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must update or add a page on SAKWiki Must buy something on EDCSource Start a new thread with a photo of your custom ALOX with scissors Start a new thread with pictures of a Fish Scaler in use Start a new thread with photos of your astronomy gear with a multitool Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start a thread with a photo of your stayglow SAK Must start a thread with a photo of your camo SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least twelve different colored ALOX models in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: CyberTool Family Complete!
Reply #21 on: August 13, 2019, 01:41:52 PM
Cool scales Reinier  :like: :tu:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

nl Offline Reinier

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,293
  • \o/
Re: CyberTool Family Complete!
Reply #22 on: August 13, 2019, 01:51:31 PM
I agree Wim! Not my SAK though!
You should seriously visit vicfan.com. All the hoopy froods are doing it.
Merit Badges Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo showing the Hook in use Must sell something on EDCSource Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must update or add a page on SAKWiki Must buy something on EDCSource Start a new thread with a photo of your custom ALOX with scissors Start a new thread with pictures of a Fish Scaler in use Start a new thread with photos of your astronomy gear with a multitool Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start a thread with a photo of your stayglow SAK Must start a thread with a photo of your camo SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least twelve different colored ALOX models in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: CyberTool Family Complete!
Reply #23 on: August 13, 2019, 01:56:01 PM
That’s a shame  :facepalm:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: CyberTool Family Complete!
Reply #24 on: August 13, 2019, 02:16:20 PM
Quote from: Rizio Il Ghiro on August 13, 2019, 12:28:41 PM
Wow, that’s quite a collection, Max! Good to see that there are other models out there I didn’t know about too...
Thanks Rizio, and good luck with your build!  :hatsoff:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: CyberTool Family Complete!
Reply #25 on: August 13, 2019, 02:18:01 PM
Quote from: Reinier on August 13, 2019, 01:27:09 PM
Here's another one that you're missing :D

(Image removed from quote.)
Ha!  :like: A 58mm advertising a CyberTool.
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: CyberTool Family Complete!
Reply #26 on: August 13, 2019, 02:32:01 PM
I am so glad I stopped looking  :rofl:.  It took long enough to find Cybertools in my price range.  The Surf tool looks really neat tho.  Theres also a +B Cyber Yeoman  :whistle:
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread and post a picture of fire making kit or fire with a multitool Must have a review written in the proper format and posted on the Main Site Start a new thread with photos of camping, including those showing preferred camping equipment Start a thread with photos of at least 5 different Juice models in your collection Start a thread with a photo of at least ten OPT's in your collection Start a new thread with photos of a Japanese made PST in your collection

hr Offline styx

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,603
Re: CyberTool Family Complete!
Reply #27 on: August 13, 2019, 08:59:32 PM
congrats
Solving problems you didn't know you had in the most obscure way possible

"And now, it's time to hand this over to our tame race axe driver. Some say, he can live in the forest for six months at a time without food, and he knows of a secret tribe of only women where he is their God. All we know is, he's call the Styx!" - TazzieRob
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the axe in use Start a new thread with photos of your Mora knives in use Test,please ignore Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: CyberTool Family Complete!
Reply #28 on: August 13, 2019, 09:53:06 PM
Thanks styx  :hatsoff:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

be Offline Ivo

  • *
  • No Life Club
  • ******
    • Posts: 1,944
Re: CyberTool Family Complete!
Reply #29 on: August 15, 2019, 11:33:57 AM
These are my CT's  :hatsoff:
Cybertools.jpg
* Cybertools.jpg (Filesize: 223.91 KB)
The Vikings say "when your battle axe is to short do one step forward"
Merit Badges Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a new thread with photos of your Buck knives in use Start a new thread with a photo showing the axe in use Start a new thread with a photo showing the Hook in use Start a new thread with photos of your Mora knives in use Start a new thread with photos of your astronomy gear with a multitool Start a new thread with pictures of a Fish Scaler in use Must buy an item through the MTo Store Start a new thread with photos of your chainsaws Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a picture of fire making kit or fire with a multitool Must update or add a page on the Multitool.org Multitool Encyclopedia Must start a thread showing a photo of at least eight BO tools Must start a thread with a photo of your birth year SAK Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

Pages: 1 2   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $152.99
PayPal Fees: $8.68
Net Balance: $144.31
Below Goal: $155.69
Site Currency: USD
48% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal