Title says it all really. Also shown is my Style CS with a flat driver fromn a Squirt and a package opener.
Would have been an easy mod --- heat the pivot to weaken the glue, undo the screw and replace tool. Except the top screw was tight and only the reverse screw would move. So I had to remove the pivot and then reattach the scissors under backspring pressure. Then somehow I broke off the little metal bit that is on the little spring-thing on the scissors on the opposite handle. Luckily I had a spare from a Squirt, and replaced that, again having to reinsert the pivot under backspring pressure.
But it's done.