The great multitool picture thread

Sea Monster · **Reply #1110 on:** February 17, 2008, 10:12:23 PM

I see the sunrise every morning.

Stupid house overlooking the beach.

It's nice I suppose, but I find it worthwhile only insofar as that it is not suburbia, rather than because it is clear horizon, eh.

I suppose there is a Sunrise in suburbia too, just happens a few minutes later...

edap617 · **Reply #1111 on:** February 18, 2008, 12:00:55 AM

Dunc5, did you go to the beach just for the Supertool pictorial?

I like the pictures. Thanks.

Eddie

Benner · **Reply #1112 on:** February 18, 2008, 12:03:54 AM

Dunc lives near the coast anyway.

NutSAK · **Reply #1113 on:** February 18, 2008, 03:08:24 AM

That pic of the folded tool on the post is gorgeous! It's one of the best in this entire thread, IMO.

edap617 · **Reply #1114 on:** February 18, 2008, 04:50:45 AM

Quote from: Benner on February 18, 2008, 12:03:54 AM

Dunc lives near the coast anyway.

That body of water, is that the English Channel where the greatest Allied armada crossed to Normandy in operation D-Day?

Mike, Lord of the Spammers! · **Reply #1115 on:** February 18, 2008, 09:07:51 AM

It's the north sea mate, probably the roughest sea in the world

Benner · **Reply #1116 on:** February 18, 2008, 12:13:29 PM

Quote from: NutSAK on February 18, 2008, 03:08:24 AM

That pic of the folded tool on the post is gorgeous! It's one of the best in this entire thread, IMO.

Ok how much did Dunc pay you to say that then?

NutSAK · **Reply #1117 on:** February 18, 2008, 01:16:21 PM

Quote from: Benner on February 18, 2008, 12:13:29 PM

Quote from: NutSAK on February 18, 2008, 03:08:24 AM
That pic of the folded tool on the post is gorgeous! It's one of the best in this entire thread, IMO.

Ok how much did Dunc pay you to say that then?

I was hoping to discuss that with him after I made the post, but I've found out it doesn't work that way.

prime77 · **Reply #1118 on:** February 19, 2008, 05:46:45 AM

Not much for using belt sheaths I thought I would try my hand at putting a pocket clip on one of my Psts using a Charge/Wave clip. Drilling through the clip in a major pain in the butt. I have done it once before when doing Bobs Spirit clip and forgot how difficult it was. It turned out ok, the clip has no side to side play. I'm not to sure how happy I am with the final results.

I used the Kick clip as a wrench and the surge to hold the other screw.

Final results

J-sews · **Reply #1119 on:** February 19, 2008, 05:53:43 AM

It certainly looks good Prime!

What is it you're not sure about?

prime77 · **Reply #1120 on:** February 19, 2008, 06:28:43 AM

Quote from: J-sews on February 19, 2008, 05:53:43 AM

It certainly looks good Prime!

What is it you're not sure about?

Maybe I'm being to hard on myself. It was hard this time to get the hole for the screw centered. So I had to grind the top of the Pst handle down just a hair to make the lip of the clip fit in place. It works I guess that's all that counts.

Benner · **Reply #1121 on:** February 19, 2008, 09:25:56 AM

I think it looks great! I have often thought about putting a clip on mine so if you end up not liking it remember me.

Great mod that.

Benner · **Reply #1122 on:** February 19, 2008, 03:30:10 PM

Just some pics that I took whilst out in the garden today...

Roadie · **Reply #1123 on:** February 19, 2008, 03:42:28 PM

Very nice Ben, especially like that Swisstool one!

Dunc · **Reply #1124 on:** February 19, 2008, 04:39:48 PM

Nice pics Benner

Thanks for the kind words guys

edap617 I live a couple of hundred yards away from the beach so I find myself on there most days

And yes it is the English channel , well at the top of it .The North Sea is a very cold harsh sea but its not the roughest in the world

Dunc

Mike, Lord of the Spammers! · **Reply #1125 on:** February 19, 2008, 09:36:13 PM

Great pictures, ben mate, the rest of you brit boys are really putting me to shame

J-sews · **Reply #1126 on:** February 20, 2008, 02:15:07 AM

Quote from: prime77 on February 19, 2008, 06:28:43 AM

Quote from: J-sews on February 19, 2008, 05:53:43 AM
It certainly looks good Prime!

What is it you're not sure about?

Maybe I'm being to hard on myself. It was hard this time to get the hole for the screw centered. So I had to grind the top of the Pst handle down just a hair to make the lip of the clip fit in place. It works I guess that's all that counts.

It looks good to me!
By the way, before you do any more pocket clip mods, give me a shout and I'll hook you up with a solid carbide drill bit. It will cure all your woes!

Leatherman123 · **Reply #1127 on:** February 20, 2008, 02:16:13 AM

Prime, I love how the SURGE is in the pic!

prime77 · **Reply #1128 on:** February 20, 2008, 06:32:14 AM

Quote

It looks good to me!
By the way, before you do any more pocket clip mods, give me a shout and I'll hook you up with a solid carbide drill bit. It will cure all your woes! Cool

I was talking to my Step-Father about drilling into the clip and how hard it was and that is exactly what he said I needed.

Quote

Prime, I love how the SURGE is in the pic!

Yea, I don't use THE SURGE!!! that much lately, but I found that it worked the best for gripping the LM screws.

J-sews · **Reply #1129 on:** February 21, 2008, 04:30:52 AM

Oh yah, carbide is a wonderful wonderful thing

Spoonrobot · **Reply #1130 on:** February 21, 2008, 12:47:23 PM

Quote from: prime77 on February 19, 2008, 05:46:45 AM

I used the Kick clip as a wrench and the surge to hold the other screw.

How did I miss this for so long?

I'm ordering two more, cut down the stabilizing tab and they work great. I sense a lot of adjustment happening in the near future.

Thanks for the tip!

Benner · **Reply #1131 on:** February 21, 2008, 12:57:32 PM

Quote from: Spoonrobot on February 21, 2008, 12:47:23 PM

Quote from: prime77 on February 19, 2008, 05:46:45 AM
I used the Kick clip as a wrench and the surge to hold the other screw.

How did I miss this for so long?

I'm ordering two more, cut down the stabilizing tab and they work great. I sense a lot of adjustment happening in the near future.

Thanks for the tip!

Bob mentioned it a while ago here http://forum.multitool.org/index.php/topic,2739.msg37582.html#msg37582 That must have been when you were away for a while.

Spoonrobot · **Reply #1132 on:** February 21, 2008, 01:11:11 PM

Quote from: Benner on February 21, 2008, 12:57:32 PM

Quote from: Spoonrobot on February 21, 2008, 12:47:23 PM
Quote from: prime77 on February 19, 2008, 05:46:45 AM
I used the Kick clip as a wrench and the surge to hold the other screw.

How did I miss this for so long?

I'm ordering two more, cut down the stabilizing tab and they work great. I sense a lot of adjustment happening in the near future.

Thanks for the tip!

Bob mentioned it a while ago here http://forum.multitool.org/index.php/topic,2739.msg37582.html#msg37582 That must have been when you were away for a while.

Ah.

Thanks for the link. This forum is so useful.

Here's some pictures of my slightly wonky Wave. I am really curious how it got broken in such a manner.

Leatherman123 · **Reply #1133 on:** February 21, 2008, 03:44:38 PM

I am guessing you dropped it! It looks like it could have sheared off also because it does indeed look rusty! LM warranty will repair/replace it no questions asked!

Benner · **Reply #1134 on:** February 21, 2008, 04:59:42 PM

That is the same fault as mine had.

Roadie · **Reply #1135 on:** February 21, 2008, 08:12:30 PM

Thanks to hawkchucker i now have a mini prybar! Thanks again mate!

Mike, Lord of the Spammers! · **Reply #1136 on:** February 21, 2008, 08:29:27 PM

The generousity of the members here is really astounding isn't it

Roadie · **Reply #1137 on:** February 21, 2008, 08:31:17 PM

Quote from: micky d on February 21, 2008, 08:29:27 PM

The generousity of the members here is really astounding isn't it

Aye that it is!

cryptrick · **Reply #1138 on:** February 21, 2008, 08:38:50 PM

Well I'm still waiting to be given a 'multitool.org Charge' or 'Moderator status' but haven't been given either yet... the generosity sucks round here IMO

NutSAK · **Reply #1139 on:** February 21, 2008, 09:06:43 PM

Quote from: cryptrick on February 21, 2008, 08:38:50 PM

Well I'm still waiting to be given a 'multitool.org Charge' or 'Moderator status' but haven't been given either yet... the generosity sucks round here IMO

523 more posts and we'll make you a member of the No Life Club. I'd say that's pretty generous, no.

Now that I get to looking at it, I'm nearly a member.

Hello Lurker! Remove this ad and much more by logging in.

The great multitool picture thread

Donations

Community Links