Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Found this Gerber...

SirVicaLot · 39 · 2571
« previous next »
Pages: 1 2   Go Down

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Found this Gerber...
on: January 13, 2020, 08:49:08 PM
Last night while walking the dogs I found this Gerber laying in the dirt next to a road:



I only saw it, because I basically stumbled over it.

It had dried mud on it, so I gave it a cleaning. Unfortunately there are no markings on it, so I cannot return it to its owner.
You can tell it was used a lot. The file is broken off, one of the wire cutters is missing and both Philips and blade were messed up.

I already fixed the blade and it is usable again. I would really like to bring it back to life. I am not very familiar with Gerber, can someone tell me what type it is? Has serrated blade and normal blade, and no scissors.

I think I would be uncomfortable to send it in to Gerber, to get it fixed, as I did not buy it. I understand that warranties are linked to the tool and not to the buyer, yet I still don‘t think it would be right. Does someone have parts laying around for this kind of tool, that they don‘t need anymore (maybe leftovers from a mod), and be willing to sell them to me? Doesn‘t have to be a file, whatever fits in the spot would be appreciated.  :cheers:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

gb Offline Fuzzbucket

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,585
Re: Found this Gerber...
Reply #1 on: January 13, 2020, 09:09:03 PM
Good grief, you jammy bas...

 :cheers:
Merit Badges Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Post a picture and recipe for a batch of Chili that you have made Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store

us Offline Rapidray

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 24,490
Re: Found this Gerber...
Reply #2 on: January 13, 2020, 09:12:02 PM
Any patent dates on the inside of the handle?
Looks like a 600 with the replaceable wire cutters, so a newer model. Just a guess on my part but cool find.  :cheers:
Merit Badges Must start a thread with a photo of your birth year SAK Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Start a new thread with photos of at least 8 different 111mm models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a picture of a fish or fishing kit with a multitool Must start a thread with a photo of your EDC watch Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the Vic Huntsman for thirty (30) consecutive days.

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Found this Gerber...
Reply #3 on: January 13, 2020, 09:16:39 PM
No dates or any other markings on the inside  :dunno:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Found this Gerber...
Reply #4 on: January 13, 2020, 09:17:28 PM
Quote from: Fuzzbucket on January 13, 2020, 09:09:03 PM
Good grief, you jammy bas...

 :cheers:

You have me at a loss here, Fuzzy.  :think: :rofl:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

gb Offline Fuzzbucket

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,585
Re: Found this Gerber...
Reply #5 on: January 13, 2020, 09:34:28 PM
Quote from: Fuzzbucket on January 13, 2020, 09:09:03 PM
Good grief, you jammy* bas...

 :cheers:

Quote from: SirVicaLot on January 13, 2020, 09:17:28 PM
You have me at a loss here, Fuzzy.  :think: :rofl:

...tard!  :ahhh


*Jammy - slang for lucky.
Merit Badges Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Post a picture and recipe for a batch of Chili that you have made Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 71,683
Re: Found this Gerber...
Reply #6 on: January 13, 2020, 09:37:24 PM
Fuzzy be jelly  :D
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days.

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 71,683
Re: Found this Gerber...
Reply #7 on: January 13, 2020, 09:37:52 PM
It's a newer MP600, nice find !
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days.

gb Offline Fuzzbucket

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,585
Re: Found this Gerber...
Reply #8 on: January 13, 2020, 09:42:26 PM
Merit Badges Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Post a picture and recipe for a batch of Chili that you have made Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Found this Gerber...
Reply #9 on: January 13, 2020, 09:52:54 PM
Quote from: Fuzzbucket on January 13, 2020, 09:34:28 PM
...tard!  :ahhh


*Jammy - slang for lucky.

Gotcha  :tu: :rofl:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Found this Gerber...
Reply #10 on: January 13, 2020, 09:54:05 PM
Quote from: SteveC on January 13, 2020, 09:37:52 PM
It's a newer MP600, nice find !

Thanks, Steve!  :hatsoff:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

us Offline Rapidray

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 24,490
Re: Found this Gerber...
Reply #11 on: January 13, 2020, 09:57:22 PM
Cool  :tu:
Merit Badges Must start a thread with a photo of your birth year SAK Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Start a new thread with photos of at least 8 different 111mm models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a picture of a fish or fishing kit with a multitool Must start a thread with a photo of your EDC watch Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the Vic Huntsman for thirty (30) consecutive days.

gb Offline Fuzzbucket

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,585
Re: Found this Gerber...
Reply #12 on: January 13, 2020, 10:46:23 PM
Quote from: SirVicaLot on January 13, 2020, 09:52:54 PM
Gotcha  :tu: :rofl:

 :D

Good score though - nice one.  :tu:  :like:
Merit Badges Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Post a picture and recipe for a batch of Chili that you have made Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the axe in use Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store

pr Offline Juan el Boricua

  • No Life Club
  • ******
    • Posts: 3,676
Re: Found this Gerber...
Reply #13 on: January 14, 2020, 02:08:55 AM
Nice find, Sir!  :tu:
Looks like a newer MP600 Basic with replaceable cutters ( wharncliffe PE blade; all three flat drivers set, and probably a giant lanyard ring). Replacement cutters are somewhat expensive for what they are, but good enough; they come with FOUR extra bolts. Good luck on your find, and "resto modding" it.  :cheers:
Edit: You may use tools from any MP400/600 series, as they are the same and  interchangable; I understand also that some of the Diesel's also work .
« Last Edit: January 14, 2020, 02:16:13 AM by Juan el Boricua »
Merit Badges For 30 consecutive days carry a SAK with a magnifying glass, and post a picture every day in the designated thread. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days.

pr Offline Juan el Boricua

  • No Life Club
  • ******
    • Posts: 3,676
Re: Found this Gerber...
Reply #14 on: January 14, 2020, 02:12:37 AM
Merit Badges For 30 consecutive days carry a SAK with a magnifying glass, and post a picture every day in the designated thread. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days.

us Offline cody6268

  • Absolutely No Life Club
  • *******
    • Posts: 6,158
Re: Found this Gerber...
Reply #15 on: January 14, 2020, 03:22:50 AM
I do agree with you that it's a little wrong to send it in. I typically do it with those that came with other knives, as I don't want useless junk sitting around.

To me, I say replace the cutters and use it. The broken blade, damaged Phillips, and damaged blade, in my opinion, is making it just ask to be modded.
Merit Badges Participate in a Challenge thread, carry a Buck knife or tool, and post a photo every day for 30 consecutive days. Participate in a Challenge and post a photo of a Utility Knife for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Participate in a Challenge thread and post a photo of a 'folding hunter' knife that isn't a Buck 110 for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Start a new thread with photos of your titanium gear with a multitool or sak Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the Vic Huntsman for thirty (30) consecutive days. Start a new thread with photos of your zip ties in use

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Found this Gerber...
Reply #16 on: January 14, 2020, 03:28:38 AM
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Found this Gerber...
Reply #17 on: January 14, 2020, 03:30:07 AM
Quote from: cody6268 on January 14, 2020, 03:22:50 AM
I do agree with you that it's a little wrong to send it in. I typically do it with those that came with other knives, as I don't want useless junk sitting around.

To me, I say replace the cutters and use it. The broken blade, damaged Phillips, and damaged blade, in my opinion, is making it just ask to be modded.

Yeah, if nobody here has some parts i might check online. Maybe i can find one with other broken implements. One whole one out of two broken ones.
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

us Offline BadMechanic

  • Hero Member
  • *****
    • Posts: 991
Re: Found this Gerber...
Reply #18 on: January 14, 2020, 04:16:45 AM
Nice find.

With the amount broken on it, perhaps someone purposely tossed it?

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Found this Gerber...
Reply #19 on: January 14, 2020, 04:36:11 AM
That would be pretty sad  :dunno:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

pr Offline Juan el Boricua

  • No Life Club
  • ******
    • Posts: 3,676
Re: Found this Gerber...
Reply #20 on: January 14, 2020, 05:41:44 AM
Just another suggestion, SirVicaLot; if the phillips is just rounded, you can use the Gerber Tool Kit (or a Ganzo, or generic-cheap-chinese bit kit for that matter) on the phillips driver and be able to have as many drivers as bits you can carry!  :multi:
Merit Badges For 30 consecutive days carry a SAK with a magnifying glass, and post a picture every day in the designated thread. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days.

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Found this Gerber...
Reply #21 on: January 14, 2020, 03:06:54 PM
Good idea  :tu: I assume the tool kit adapter is used with the philips? Like LM does it too?
Are the bits that fit in there regular sized bits?
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: Found this Gerber...
Reply #22 on: January 14, 2020, 03:13:40 PM
Great find Sir V, and  :hatsoff: for bringing it back to life.

I’ve only ‘discovered’ the Multi-Plier and MP600 recently, and they certainly have a character that sets them apart from other MTs. Enjoy!  :cheers:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

pr Offline Juan el Boricua

  • No Life Club
  • ******
    • Posts: 3,676
Re: Found this Gerber...
Reply #23 on: January 14, 2020, 03:23:20 PM

I assume the tool kit adapter is used with the philips? Like LM does it too?

Yes, it does fit over the phillips'; as a matter of fact, if you happen to have the Leatherman's bit adapter for the ST300/Rebar, you can use it as it fits very well ( that's the kit I use for both of my BO MP600s)

Are the bits that fit in there regular sized bits?

Yes they are! You can use ANY 1/4" bit that you have. That's its versatility!

On another note, Ganzo's and chinese clones are somewhat shorter than the Gerber's adapter, which for me it's better as I can reach and use the tool in tight places.
Merit Badges For 30 consecutive days carry a SAK with a magnifying glass, and post a picture every day in the designated thread. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days.

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Found this Gerber...
Reply #24 on: January 14, 2020, 03:26:59 PM
Thanks! Good to know. I don‘t have one of those adapters yet, so will add to my list. That also gives me an excuse to start another leatherworking project. Sheath with space for bit holders and an MP600.  :ahhh :D
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Found this Gerber...
Reply #25 on: January 14, 2020, 03:28:01 PM
Quote from: Max Stone on January 14, 2020, 03:13:40 PM
Great find Sir V, and  :hatsoff: for bringing it back to life.

I’ve only ‘discovered’ the Multi-Plier and MP600 recently, and they certainly have a character that sets them apart from other MTs. Enjoy!  :cheers:

 :iagree: :cheers:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

pr Offline Juan el Boricua

  • No Life Club
  • ******
    • Posts: 3,676
Re: Found this Gerber...
Reply #26 on: January 14, 2020, 03:50:42 PM
 That also gives me an excuse to start another leatherworking project. Sheath with space for bit holders and an MP600.

Will love to see it; please add pictures when done, if you don't mind me asking!  :drool:
Merit Badges For 30 consecutive days carry a SAK with a magnifying glass, and post a picture every day in the designated thread. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days.

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Found this Gerber...
Reply #27 on: January 14, 2020, 06:34:12 PM
Sure will  :cheers: Might be awhile though till i find time to get to it  :facepalm:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

nz Offline Syncop8r

  • Absolutely No Life Club
  • *******
    • Posts: 8,801
Re: Found this Gerber...
Reply #28 on: January 14, 2020, 08:01:45 PM
Is there somewhere you could advertise it as found (local paper, Facebook group) in the hope of finding the owner?
Only the real owner will be able to identify it by saying what is broken on it etc. As well as people reading this thread.  :D

ie Offline Don Pablo

  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,329
  • Yoo-hoo, big summer blowout!
Re: Found this Gerber...
Reply #29 on: January 14, 2020, 08:06:52 PM
Quote from: Syncop8r on January 14, 2020, 08:01:45 PM
Is there somewhere you could advertise it as found (local paper, Facebook group) in the hope of finding the owner?
Only the real owner will be able to identify it by saying what is broken on it etc. As well as people reading this thread.  :D

Delete this thread now! :ahhh :rofl:
Hooked, like everyone else. ;)

All hail the hook!
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days.

Pages: 1 2   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
November Goal: $300.00
Due Date: Nov 30
Total Receipts: $72.17
PayPal Fees: $4.65
Net Balance: $67.52
Below Goal: $232.48
Site Currency: USD
23% 
November Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal