Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Replacing Wave microdriver with screwdriver-turned-awl?

hsherzfeld · 11 · 1646
« previous next »
Pages: 1   Go Down

us Offline hsherzfeld

  • *
  • Hero Member
  • *****
    • Posts: 812
Replacing Wave microdriver with screwdriver-turned-awl?
on: December 02, 2020, 05:43:51 PM
Hello,

I just had an idea for a mod to my Wave+ and I was wondering if anyone here has done it before. I want to replace the microdriver on my Wave+ with an awl. I have a regular, 2004 Wave that I am willing to cannibalize for the cause. My idea is to take the flathead screwdriver from my old Wave, grind it into an awl, and fit it in place of the microdriver on my Wave+.

I foresee two potential complications. First, the "awl" will have to be shortened in order to clear the tab that the pliers rest on. Second, if I grind the rectangular screwdriver blade into a roughly triangular awl blade, I'm afraid that it will fold so far into the body of the Wave+ that the deployment tab is inaccessible.

Has anybody else done this mod or something similar? Any advice would be appreciated.
Current SAKs: Explorer, SwissChamp, Handyman (modded), Climber, Super Tinker, Tinker, Woodsman (modded), Electrician, Pioneer, SwissTool, Executive, Ambassador, Champion Plus
Current Leatherman tools: PST, Original Wave, Wave, Wave+, Blast, Bond, Curl, Style PS, Micra

Boomer Sooner!
Merit Badges Start a new thread or Post in a Challenge Thread and post a photo of a Spartan  for 30 days Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate  in Challenge thread and post a photo of a Alox SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Must start a thread with a photo of your EDC watch Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of your zip ties in use Start a thread with a photo of a repair you made with duct tape Start a new thread demonstrating paracord knot tying

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,457
Re: Replacing Wave microdriver with screwdriver-turned-awl?
Reply #1 on: December 03, 2020, 04:19:43 AM
Do you mean you would be using an OG first generation Wave flat driver to make the Wave or it is a second generation Wave :think: If using a first generation one I am not sure that the pivot end of them are compatible enough to let the awl lock :think: I am sure that several have used a Blast flat driver to make an awl from but can't remember off hand whom it was  :think: hope you can figure it out and get the awl in some way :tu:
Merit Badges Find him! Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,457
Re: Replacing Wave microdriver with screwdriver-turned-awl?
Reply #2 on: December 03, 2020, 04:20:14 AM
Also, welcome to  :MTO:  :cheers:
Merit Badges Find him! Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year.

us Offline hsherzfeld

  • *
  • Hero Member
  • *****
    • Posts: 812
Re: Replacing Wave microdriver with screwdriver-turned-awl?
Reply #3 on: December 03, 2020, 03:56:44 PM
Quote from: Poncho65 on December 03, 2020, 04:19:43 AM
Do you mean you would be using an OG first generation Wave flat driver to make the Wave or it is a second generation Wave :think: If using a first generation one I am not sure that the pivot end of them are compatible enough to let the awl lock :think: I am sure that several have used a Blast flat driver to make an awl from but can't remember off hand whom it was  :think: hope you can figure it out and get the awl in some way :tu:
Sorry, I should have phrased it differently. I am using the flat driver from a second gen Wave.
Current SAKs: Explorer, SwissChamp, Handyman (modded), Climber, Super Tinker, Tinker, Woodsman (modded), Electrician, Pioneer, SwissTool, Executive, Ambassador, Champion Plus
Current Leatherman tools: PST, Original Wave, Wave, Wave+, Blast, Bond, Curl, Style PS, Micra

Boomer Sooner!
Merit Badges Start a new thread or Post in a Challenge Thread and post a photo of a Spartan  for 30 days Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate  in Challenge thread and post a photo of a Alox SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Must start a thread with a photo of your EDC watch Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of your zip ties in use Start a thread with a photo of a repair you made with duct tape Start a new thread demonstrating paracord knot tying

us Offline hsherzfeld

  • *
  • Hero Member
  • *****
    • Posts: 812
Re: Replacing Wave microdriver with screwdriver-turned-awl?
Reply #4 on: December 03, 2020, 07:26:55 PM
Well, I went ahead and tried it. The awl turned out a bit shorter than I would have liked; the size was constrained by the plier head stop. The access tab will also limit how deep it can drill. It doesn't have a sewing eye or a groove for reaming or drilling, but it seems serviceable.
Current SAKs: Explorer, SwissChamp, Handyman (modded), Climber, Super Tinker, Tinker, Woodsman (modded), Electrician, Pioneer, SwissTool, Executive, Ambassador, Champion Plus
Current Leatherman tools: PST, Original Wave, Wave, Wave+, Blast, Bond, Curl, Style PS, Micra

Boomer Sooner!
Merit Badges Start a new thread or Post in a Challenge Thread and post a photo of a Spartan  for 30 days Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate  in Challenge thread and post a photo of a Alox SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Must start a thread with a photo of your EDC watch Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of your zip ties in use Start a thread with a photo of a repair you made with duct tape Start a new thread demonstrating paracord knot tying

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 72,549
Re: Replacing Wave microdriver with screwdriver-turned-awl?
Reply #5 on: December 03, 2020, 07:37:29 PM
Might have been better to replace the can opener with it but good job   :tu:
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days.

us Offline hsherzfeld

  • *
  • Hero Member
  • *****
    • Posts: 812
Re: Replacing Wave microdriver with screwdriver-turned-awl?
Reply #6 on: December 03, 2020, 08:14:14 PM
Quote from: SteveC on December 03, 2020, 07:37:29 PM
Might have been better to replace the can opener with it but good job   :tu:
I use the can opener occasionally, but I've NEVER used the eyeglasses driver.
Current SAKs: Explorer, SwissChamp, Handyman (modded), Climber, Super Tinker, Tinker, Woodsman (modded), Electrician, Pioneer, SwissTool, Executive, Ambassador, Champion Plus
Current Leatherman tools: PST, Original Wave, Wave, Wave+, Blast, Bond, Curl, Style PS, Micra

Boomer Sooner!
Merit Badges Start a new thread or Post in a Challenge Thread and post a photo of a Spartan  for 30 days Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate  in Challenge thread and post a photo of a Alox SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Must start a thread with a photo of your EDC watch Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of your zip ties in use Start a thread with a photo of a repair you made with duct tape Start a new thread demonstrating paracord knot tying

ie Offline McStitchy

  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 19,785
Re: Replacing Wave microdriver with screwdriver-turned-awl?
Reply #7 on: December 05, 2020, 11:35:06 AM
Nice job hsherzfeld  :like:
And thanks for sharing it with us  :tu:

I was thinking of shortening the big flat so it fits into the middle position
Then using a Rebar awl.

Problem: The Rebar awl is a bit too thick and has to be "flattened" a bit. Doable though.

Didn't have the time yet to try out  :dunno:

Your solution looks great  :like:
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must put something in order and provide link to the post. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Test,please ignore Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days.

us Offline hsherzfeld

  • *
  • Hero Member
  • *****
    • Posts: 812
Re: Replacing Wave microdriver with screwdriver-turned-awl?
Reply #8 on: December 05, 2020, 07:48:01 PM
Quote from: McStitchy on December 05, 2020, 11:35:06 AM
Nice job hsherzfeld  :like:
And thanks for sharing it with us  :tu:

I was thinking of shortening the big flat so it fits into the middle position
Then using a Rebar awl.

Problem: The Rebar awl is a bit too thick and has to be "flattened" a bit. Doable though.

Didn't have the time yet to try out  :dunno:

Your solution looks great  :like:
That would be my ideal solution as well, but I don't have a Rebar awl. I've seen two on Ebay and both were $30+ !
Current SAKs: Explorer, SwissChamp, Handyman (modded), Climber, Super Tinker, Tinker, Woodsman (modded), Electrician, Pioneer, SwissTool, Executive, Ambassador, Champion Plus
Current Leatherman tools: PST, Original Wave, Wave, Wave+, Blast, Bond, Curl, Style PS, Micra

Boomer Sooner!
Merit Badges Start a new thread or Post in a Challenge Thread and post a photo of a Spartan  for 30 days Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate  in Challenge thread and post a photo of a Alox SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Must start a thread with a photo of your EDC watch Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of your zip ties in use Start a thread with a photo of a repair you made with duct tape Start a new thread demonstrating paracord knot tying

ie Offline McStitchy

  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 19,785
Re: Replacing Wave microdriver with screwdriver-turned-awl?
Reply #9 on: December 05, 2020, 08:25:39 PM
Jikes.... 30+$ for an awl  :facepalm:
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must put something in order and provide link to the post. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Test,please ignore Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days.

us Offline hsherzfeld

  • *
  • Hero Member
  • *****
    • Posts: 812
Re: Replacing Wave microdriver with screwdriver-turned-awl?
Reply #10 on: December 06, 2020, 10:32:18 PM
Quote from: McStitchy on December 05, 2020, 08:25:39 PM
Jikes.... 30+$ for an awl  :facepalm:
Yeah! I wasn't about to fork over a three-layer SAK's worth of dough for a little piece of steel.
Current SAKs: Explorer, SwissChamp, Handyman (modded), Climber, Super Tinker, Tinker, Woodsman (modded), Electrician, Pioneer, SwissTool, Executive, Ambassador, Champion Plus
Current Leatherman tools: PST, Original Wave, Wave, Wave+, Blast, Bond, Curl, Style PS, Micra

Boomer Sooner!
Merit Badges Start a new thread or Post in a Challenge Thread and post a photo of a Spartan  for 30 days Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate  in Challenge thread and post a photo of a Alox SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Must start a thread with a photo of your EDC watch Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of your zip ties in use Start a thread with a photo of a repair you made with duct tape Start a new thread demonstrating paracord knot tying

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
May Goal: $300.00
Due Date: May 31
Total Receipts: $21.00
PayPal Fees: $1.42
Net Balance: $19.58
Below Goal: $280.42
Site Currency: USD
 7%
May Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal