Multitool.org Forum
Non Tool Forum => Gadget Freak and EDC Forum => Topic started by: Lynn LeFey on March 07, 2013, 07:32:53 PM
-
I thought this device deserved it's own thread, so I figured I'd start one.
The discussion started in this thread:
http://forum.multitool.org/index.php/topic,43380.msg699760.html#msg699760
Right... So...
You have this cute little computer. What kind of inexpensive peripherals are available to make it a 'real' computer?
Also, the link to the Raspberry Pi site.
http://www.raspberrypi.org/
-
i'd like to start this derailing by talking about my media center PC...
j/k :rofl:
looked at picking up a RPi (Type B Single Board Computer 512MB) wasn't sure if I need anything else to get started?
-
wasn't sure if I need anything else to get started?
They don't come with a power supply, but it's a micro USB connection so widely available. Other than that you'll just need an SD card for the OS and your input devices and it's pretty much ready to go.
-
SD cards are getting kind of ridiculously cheap, and running a build of Linux doesn't take up much RAM or processing power.
I looked at a few video options, and it seems a small 7" screen goes at under $100 these days. That's still a little pricey for what's essentially a toy. Still looking for cheap I/O options, but i don't think the system would be assembled much under $150, and that puts it in the same price range as a Kindle Fire, which IS a complete system.
Grant mentioned these as something like an alternative to the OLPC, an inexpensive and widely available computer to put in the hands of everyone.
There's also a rumored (maybe exists now?) $35 tablet from India.
EDIT: Seems it DOES exist, but checking on-line shows me that it's around $120 to get one to the U.S.
-
I just realized that... I have a few old 1/2gb SD cards which have been retired from my DSLR, which has a 32gb card in it now. Also seems the powersupply for my nexus 7 meets the 5v 2a requirement, and has a usb socket for a microusb to usb cable to plug into...
maybe I should get one of their enclosures too...
-
I'm using one for a geocache. Runs off solar, hosts a website and tied to a USB powered wifi hotspot. Cacher turns it on, logs their find on the hosted page which is saved to the sd card :)
The guts:
(http://img.tapatalk.com/d/13/03/08/9e7eta9u.jpg)
The cache:
(http://img.tapatalk.com/d/13/03/08/2yqupaza.jpg)
-
I have one that I'm setting up for my home / office phone system using RasPBX. It is going to pay for itself in a matter of months as it is replacing an old tower that is consuming electricity like it was free.
I had an old powered USB hub and a spare 16GB SD card. Ordered an enclosure with a set of heatsinks for less than $10, and a 1m USB cable for $3, off of fleabay. Borrowed a monitor from the car DVD player and a spare keyboard for the initial setup. It is now running "headless" with a web interface for all management. It has been running since early January without making any noise and no discernible heat. That is amazing.
I'm now thinking of where else I could use these neat little machines. Out in my un-heated workshop? As a home automation / security system controller? In the kitchen?
Sent from my iPad2
-
I've been a bit of a cop out with mine, it's just hung off the back of my TV. The TV is powering it, and with RaspBMC it functions as quite a nice little HTPC. Control via my phone or laptop.
-
Control via my phone...
(Sigh) yeah... I have to admit, that's pretty cool.
My friend pulled this trick recently, and I felt like a Neanderthal staring at fire for the first time.
-
I haven't done anything with mine yet. I was so pissed off with RS when it arrived. I put my name down pre-order and they kept sending "Coming soon" emails for about three months, then FINALLY sent me an "Invitation" to buy one and a password to get into the online store... I ordered one AND paid my money to RS Components and THEN it was another couple of months while they sent me "Your order is nearly at the top of the list" emails.
FINALLY I got an email saying "Your order has shipped"...
I happened to mention this to a work colleague and he said "Oh yeah, they are cool... I bought one a couple of weeks ago."
WTF?.. Where from??
Oh, you just order them from RS Components, they sent it "Next Day"
I STILL hadn't received mine at this stage. and when it did eventually turn up it was the 256MB version and the guy from work had got a 512MB.
RS Components? More like BS components. I was so gutted that I threw it in the junk drawer in the kitchen and haven't looked at it since.
</rant>
-
I haven't done anything with mine yet. I was so pissed off with RS when it arrived. I put my name down pre-order and they kept sending "Coming soon" emails for about three months, then FINALLY sent me an "Invitation" to buy one and a password to get into the online store... I ordered one AND paid my money to RS Components and THEN it was another couple of months while they sent me "Your order is nearly at the top of the list" emails.
FINALLY I got an email saying "Your order has shipped"...
I happened to mention this to a work colleague and he said "Oh yeah, they are cool... I bought one a couple of weeks ago."
WTF?.. Where from??
Oh, you just order them from RS Components, they sent it "Next Day"
I STILL hadn't received mine at this stage. and when it did eventually turn up it was the 256MB version and the guy from work had got a 512MB.
RS Components? More like BS components. I was so gutted that I threw it in the junk drawer in the kitchen and haven't looked at it since.
</rant>
I placed my order in July/August and got it at Christmas, from RS.
I never once recieved an email from them.
-
That doesn't sound terribly promising.
There's no excuse for poor customer service these days.
Def
Sent from a digital multitool
-
when I looked the other day there was a 1 week lead on the 256mb one, and 2 weeks on the 512mb... plus shipping to europe... guessing I'm looking at least a month from order to deliver...
-
I am waiting for my Rev B board to arrive. When it does arrive I'll be adding a few gyros, GPS and ultrasonic sensors and plugging it into this:
(http://i50.tinypic.com/28he5uq.jpg)
The RP will be running Picopter. And because of its non-realtime-ness (unless using PirateOS, which has its own issues), and because I will gladly accept any excuse to build myself more toys I'm building another slightly larger quadcopter that will run off an arduino board.
Fortunately, the more expensive sensors are interchangeable.
In case anyone is interested - the frame is an SK450 which you can pick up for very little money, Turnigy ESCs, Propdrive 28 motors, and in the picture the flight controller is a standard KK2.0 board. You can build one of these for about AU$200, including a cheapo 6ch transmitter such as the Turnigy 9x. Props cost a few bucks for a pack of four and it'll easily lift a camera such as a GoPro.
Kitting it out with GPS and a more advanced flight controller you can make it follow waypoints and return home automatically. Throw even more money at it and you can have a first person view system where you wear goggles and it feels as if you're actually in the cockpit.
As it stands, it flies beautifully, and will hopefully be even better with a more advanced RP or Arduino acting as the flight controller
-
That is an awesome rig!
Def
Sent from a digital multitool
-
oh, another poor bloke with SAKs and R/C gear eating up the money...
I have a couple of quads, three or four planks (fixed wing models) and currently 5 Heli's Trex250 FBL, Trex450, Trex 500PRO, Trex 500 FBL and Trex600.
Who needs a high maintenance woman when you fly R/C Helicopters?
-
oh, another poor bloke with SAKs and R/C gear eating up the money...
Correction - soon to be poor if I continue to do this! :)
And I thought my divorce was costly. At least I am enjoying this, and I can stop anytime. No, really. Honest. Any time!
I have a couple of quads, three or four planks (fixed wing models) and currently 5 Heli's Trex250 FBL, Trex450, Trex 500PRO, Trex 500 FBL and Trex600.
Not done any fixed wing stuff, but I have played with a Twister 400 fixed pitch helicopter. It was... challenging, but great fun. The quads appeal because I can actually make them myself from any old bits I've got lying around and fix most crash damage with a bit of duct tape and cable ties. And they're relatively easy to fly.
That said, I'd love to have a go with a few planks. Had a whale of a time a few weeks ago watching people blatting around with big scale EDF models at the local RC flying club.
Who needs a high maintenance woman when you fly R/C Helicopters?
I have one of those too. You'd think I'd have learned my lesson after the ex, but at least this one is more understanding, and independently financed, so that's a bit of pressure off!
-
I love the idea of the quads. My boss has a Parrot AR Drone that he has told me I'm welcome to use any time, but it seems a bit pricey a toy to take a chance on breaking. :ahhh
Def
-
I love the idea of the quads. My boss has a Parrot AR Drone that he has told me I'm welcome to use any time, but it seems a bit pricey a toy to take a chance on breaking. :ahhh
Def
The Parrots are lots of fun, and they're reasonably crash proof - they have pretty aggressive stabilisation and safety features. But as you note they're quite expensive - the quad in my picture cost AU$140 less to get into the air than an AR Drone, and being bigger with more powerful motors can lift more. You can get ready to fly ones for a bit more.
Of course, you lose the nice 'control from your phone features', and accordingly flying will be a bit more involved unless you automate it a bit as I am intending to, but on the other hand, parts are plentiful, cheap and you can mod it to do lots of things. I am presently fighting with my inner sensible side to stop myself buying a motorised gimbal mount for the GoPro...
-
Is there a decent kit you could recommend for a quad that would lift a GoPro? I'm not terribly skilled when it comes to electronics, so anything more than plugging part A into part B is a bit beyond me.
Def
-
Is there a decent kit you could recommend for a quad that would lift a GoPro? I'm not terribly skilled when it comes to electronics, so anything more than plugging part A into part B is a bit beyond me.
Def
Fortunately, plugging things into other things is pretty much all you need to do. No soldering or anything. The hard part is trimming it yourself. That can take a while, but you'll be done in an hour if you're new to it. The KK board that is in my quad at the moment has its own lcd screen which you can use to set it up right on the quad itself, whereas some of the more advanced controllers require you to plug it into a computer to do that.
All the parts that make up the quad in the picture came from Hobbyking, a Hong Kong based site with local warehouses in a number of countries that lots of people have good luck with, but there are some not-so-good stories of people who ended up with missing parts, or broken boxes, so bear that in mind. I've not had any problems with them, but the risk is always there. They've a good enough returns policy, though. There are plenty of other sources for the components, though. RCGroups and Ebay are good places to start.
Anyway, warnings aside - these are the components. Prices are in US dollars:
50w 5A Balance Charger - $17.99
SK450 Frame - $17.99
KK2.0 Board - this is about the most basic flight controller you can get. Doesn't allow for addons like gps, altitude hold, camera gimbal control, but it'll get you in the air to see if quads are for you - $29.99
Turnigy 2200 mAh 3s Battery - $8.99
Turnigy 9X transmitter & receiver combo - $54
NTM Motors - $59.96 (for four)
Turnigy Plush 30A Speed Controllers - $48.76 (for four) note that these are a bit overspecced for the motors, but they were cheaper than the 25A ones, so for future proofing sake and being a cheapskate I went with these.
8045 Right hand props - $2.85 for a pack of four (the spares will always come in handy!)
8045 Left hand props - $2.85
Total, to get you into the air - $243.38 US. A bit more than in my original post, but still less than an AR Drone. I guess prices have gone up a bit since I bought.
The quad, as is, will lift about 650 grams. For comparison purposes, a Nikon D5100 DSLR body weighs about 560 grams, and a GoPro 3 (without case) only 74 grams
Also not included is a raised landing gear so the camera clears, or a dedicated mount for the gopro. I tend to tie mine to the frame and move the battery back to counteract the change in centre of gravity, while the landing gear is something I lashed together from bits of carbon fibre and plastic rod. Will do something more professional at some point. You can pick up suitable gear from ebay starting about $12 or so.
-
I'm not worried about frame/body parts, landing gear or stuff like that. I've built enough things around my house, model kits when I was a kid and so on that I can manage that sort of thing.
What type of flight time do you get out of a setup like that? The Parrot only gets between 12 and 18 minutes.
Def
-
seriously cool toys... makes me wish I had a workshop even more...
-
What type of flight time do you get out of a setup like that? The Parrot only gets between 12 and 18 minutes.
Def
About twelve minutes if you're lucky and don't run full throttle all the time. , With batteries being cheap I carry several, charged and ready to go. The charger can also charge from car batteries.
Remember that the batteries are lithium polymer. They don't go wrong a lot, but it does happen, and when they do they can be quite dangerous - see also the problems that Boeing Dreamliners are having. When in the car I store mine in an airtight old ammo box with non flammable padding to keep them from rattling around.
If one does catch fire it is worth remembering what metals at the fun end of the periodic table do when exposed to water. A powder extinguisher is probably better.
-
For people still wanting a Pi and having trouble, it's worth noting that CPC have a load of the cheaper Model As in stock, when I got my Model B it arrived quickly and they're doing free shipping at the moment.
RS are usually great with customer service but they usually deal with businesses rather than consumers, CPC are a bit more consumer friendly IMO. We get a lot of stuff from RS at work and when you have a problem it's almost always a case of "no problem, we'll have a replacement with you tomorrow" - you really can't say fairer than that.
-
ironically I discovered RS components via a banner on this site... I bookmarked the Spanish site in case I needed parts for any future projects, and had planned to do an order once I had a nice healthy list of items to get at once, shame it seems to split to a different website for the RPi...
As for other project parts, I only really need a replacement rocker switch for one of our lamps as the existing one is a bit flakey.
-
yet another reason to get a RPi:
(http://hackadaycom.files.wordpress.com/2013/03/hacked-r2d2-controlled-by-raspberry-pi.jpg)
http://hackaday.com/2013/03/23/hacked-interactive-r2d2-controlled-by-raspberry-pi/
R2D2 Robot Powered by Raspberry Pi (http://www.youtube.com/watch?v=znuUm5vbSpI#)
:gimme:
-
That is pretty cool! I'd love to have something like that, although I'd also build in an empty port to carry a multitool. Just imagine...
Me: "R2- Spirit!"
R2: Whistles happily, compartment pops open, shiny SwissTool Spirit is extended out on mechanical arm
Me: "Thanks R2!"
:D
Def
-
http://www.amazon.com/Star-Interactive-Astromech-Droid-Robot/dp/B001E95SQ2 seems to be his starting point... and it seems to have lots of features to start... a bit small however!
-
I almost bought one like that at Costco a couple of years ago. :D
Def
-
That R2-D2 builder is a very good boyfriend :D
-
http://www.theinquirer.net/inquirer/news/2260991/sony-factory-makes-its-500-000th-raspberry-pi-in-wales
I did not know they were made in Wales?
so go on you brits, support the local economy!
-
Bought a raspberry pie a couple of weeks ago, finally got round to loading the raspbian wheeze operating system onto an sd card, only to discover that my keyboard and mouse are not USB! :rant: two more things to get, I'm sure I'll get to turn it on one day.
-
There's been some discussion on the Raspberry Pi in couple of other threads, if you haven't seen it yet.
http://forum.multitool.org/index.php/topic,43580.0.html
Do you have an end plan for it, or just playing around?
-
Cheers for the link, just going to play and see what I can do. I hope to use it to learn more about general computing? I also like the ideology, and they now make them in an old Sony factory a few miles from my house. Sadly mine says made in china, but the newer models say made in WALES!
-
Philby, instead of buying a new keyboard and mouse, just get a PS/2 to USB adapter dongle for a couple dollars, and use the already-present input devices. :)
-
Cheers! got one on the way :tu:
-
I prefer a rhubarb pie... oh wait.. :D
-
I've got one I primarly use as a audio streaming device in the living room. It runs, headless connected to my home network and a set of speakers. I control it via ssh using MOC audio player to play live on line audio streaming or downloaded podcasts.
https://www.youtube.com/watch?v=XDPOpNVS_tg
I've used RaspBMC in the past and it plays very well.
-
I hook mine up occasionally for various programming projects, though I use my Arduino more and more often for the sake of convenience.
I never bought a monitor specifically for the Pi, I used either a television or computer monitor I already owned. I bought a presentation keyboard/trackpad combo off Amazon for it so I could have a USB port free (Original B model Pi), or I SSH into it from one of my other devices. The Pi is easiest to interact with via command line anyway; the desktop environment is so slow.
Anyone bought a Pi 2 yet?
-
Looking forward to a Raspberry Pi 2. I'm still running the older Model B.
-
They just launched the Pi Zero for $5
https://www.raspberrypi.org/blog/raspberry-pi-zero/
Also the latest issue of Magpi Magazine includes one free as of Thursday in the UK :ahhh
https://www.raspberrypi.org/magpi/
taken from http://hardware.slashdot.org/story/15/11/26/1411248/raspberry-pi-unveils-new-5-mini-computer
-
The new $5 model is such a neat idea. And unlike other hobbyist computers Pi Foundation has a proven record of support and a great community.
-
I want one, just do not have time to devote to it right now
-
anyone in the UK willing to grab a copy and drop ship to me?
-
Anybody else see the movie The Kingsmen? Just sayin' :o
-
anyone in the UK willing to grab a copy and drop ship to me?
I had a look this morning because I wanted one as well, all sold out :twak:
-
yeah I was looking via the website, they have some sort of newsagent availability chart... they seem out of stock everywhere, guess it can wait for the next batch.
-
yeah I was looking via the website, they have some sort of newsagent availability chart... they seem out of stock everywhere, guess it can wait for the next batch.
Two shops near me, one didn't get any, the other, one guy bought all the copies :twak:
-
as usual they underestimated the demand for it...
-
well this really boils my wee
Have a look at the price they are up for on ebay
-
lol.
I don't need it that badly...
-
I'll just wait for stock on: http://www.modmypi.com/raspberry-pi/raspberry-pi-zero-board/raspberry-pi-zero-go-kit
-
Yeah me too. Until then I'm still having fun with this.
Pi 2
(http://images.tapatalk-cdn.com/15/11/27/9982aa9b628116681b0cc07d7fd9f58e.jpg)
-
Apparently it runs Openelec Kodi (XBMC) just fine...
https://www.youtube.com/watch?v=Q8GZr2fyUY0
(painful to sit through, but it does show it actually playing video as well as navigating the interface at various points.)
-
I am soo excited!! my raspberry pi 3 should arrive on Sunday!
I love linux, so this can be a full blown computer from my point of view, but what I am SUPER excited to play with is the
Retropie emulator set up (http://blog.petrockblock.com/retropie/)
-
That's awesome. I can't wait to see what you do with it. I keep thinking about getting one but then I'm not sure I would really know what to do with it when I did.
They are awesome though.
Def
-
still think this would be a cool thing to have, of any variety...
-
I also ordered an O-Droid C2 (http://www.hardkernel.com/main/products/prdt_info.php)
which I bought from Here (http://ameridroid.com/)
here are some specs, this is is only $5 more than a Raspberry Pi 3, but is a beast. if it had built in Wifi, it would be amazing.
key specs Gigabit Ethernet, 4K video, 2 Gig Ram.
ODROID-C2
The ODROID-C2 is a 64-bit quad-core single board computer(SBC) that is one of the most cost-effective 64bit development boards available in the ARM world. It can function as a home theater set-top box, a general purpose computer for web browsing, gaming and socializing, a compact tool for college or office work, a prototyping device for hardware tinkering, a controller for home automation, a workstation for software development, and much more.
Some of the modern operating systems that run on the ODROID-C2 are Ubuntu, Android, ARCHLinux, Debian, with thousands of free open-source software packages available. The ODROID-C2 is an ARM device -- the most advanced architecture for mobile devices and embedded 64-bit computing. The ARM processor’s small size, reduced complexity and low power consumption makes it very suitable for miniaturized devices such as wearables and embedded controllers.
* Amlogic ARM® Cortex®-A53(ARMv8) 2Ghz quad core CPUs
* Mali™-450 GPU (3 Pixel-processors + 2 Vertex shader processors)
* 2Gbyte DDR3 SDRAM
* Gigabit Ethernet
* HDMI 2.0 4K/60Hz display
* H.265 4K/60FPS and H.264 4K/30FPS capable VPU
* 40pin GPIOs + 7pin I2S
* eMMC5.0 HS400 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot
* USB 2.0 Host x 4, USB OTG x 1 (power + data capable)
* Infrared(IR) Receiver
* Ubuntu 16.04 or Android 5.1 Lollipop based on Kernel 3.14LTS
-
that looks like a nice piece of kit, should handle openelec/Kodi nicely!
-
OK, so I have had a little time to play with the Raspberry Pi 3 and the O-Droid C2, and I thought I would share my thoughts.
the Raspberry Pi is a great item, you will not be disappointed.
however, the O-Droid C2 is way faster. I have Ubuntu 16.04 Mate running on it and it is a zippy little computer! the Raspberry Pi 3 running Raspbian, is noticeably slower.
so mainly what I have set up is as follows.
the O-Droid is running Ubuntu Mate 16.04 and that is its full time job.
the Rapberry Pi 3 is my little fun box, running RetroPie (http://blog.petrockblock.com/retropie/) with Kodi added in.
it is a great toy and a blast from the past!
I think if I did not have the O-Droid, I would not think the R Pi 3 was slow, and I would be very happy with its speed running Linux, but that is spoiled.
final note the O-Droid does have a trick up its sleeve that the Raspberry does not, it can run Android (Android 5 actually)
-
O-DROID sounds neat, maybe if openelec drops for it, right now looks like someone is working on it, and having h265 support is something I wouldn't mind on whatever replaces my ion system
-
saw this video on facebork, they stuck a new screen and a raspberry pi zero in an old Nintendo gameboy... and loaded it with arcade emulator... to top it off, they modified an old gameboy cartridge to be the SD/microSD converter and wired the pi's sd card to the cartridge slot... really nicely done and well inspired project!
https://www.youtube.com/watch?v=aMhTMgDHGaM
-
That is pretty awesome! I'd love to have a Game Boy that plays classic Nintendo games.
Def
-
I bought another Raspberry Pi 3 today :D and two Raspberry Pi zeros :facepalm: :D
that brings me to 3 Raspberry Pi 3's, 2 Raspberry Pi Zeros, and 1 O-Droid C2.
that escalated quickly
-
saw this video on facebork, they stuck a new screen and a raspberry pi zero in an old Nintendo gameboy... and loaded it with arcade emulator... to top it off, they modified an old gameboy cartridge to be the SD/microSD converter and wired the pi's sd card to the cartridge slot... really nicely done and well inspired project!
https://www.youtube.com/watch?v=aMhTMgDHGaM
I wish I had the time (and skills required) to make one of these, this looks amazing!
-
I think most of the work is sourcing the correct parts, then it really is some basic wiring imho, and a little software fiddling.
While it is a pretty neat idea, I'm pretty sure you could just repurpose an old android phone for the job, it wouldn't look as nostalgic, but fits in your pocket better!
still wouldn't mind a pi Zero, every time I look they're sold out.
-
Yeah, the software fiddling is probably what would kill me on something like that.
Def
-
I think most of the work is sourcing the correct parts, then it really is some basic wiring imho, and a little software fiddling.
While it is a pretty neat idea, I'm pretty sure you could just repurpose an old android phone for the job, it wouldn't look as nostalgic, but fits in your pocket better!
still wouldn't mind a pi Zero, every time I look they're sold out.
now that raspberry Pi 3 production has slowed, Pi Zeros should become more available in the near future.
I bought kits that came with a power adapter, Micro-USB to USB, and Micro HDMI to HDMI. for $20 each. not too bad
-
I keep going to modmypi https://www.modmypi.com
Although to be honest apart from the pi and case itself the rest I likely have, but they offer both kits and parts as needed, so it's not that terrible.
I'd be tempted to order cables from deal extreme if I needed multiple sets
-
I have a 20eur coupon to use on ebay (if I pay using paypal, and the item is over 40eur shipping excluded)
So I may well pick up a RPi 3 for 23eur shipped (using that discount).
decisions decisions... :think:
-
Can't argue with that logic. :D
Def
-
and ordered... 22,49 EUR for a RPi 3 delivered. (38 is about the cheapest I've seen without shipping added, so this is actually a really good opportunity)
ordered a black PVC case for 1.50eur as well with free shipping...
-
and... I have pi
who doesn't love them some pi :P :facepalm:
-
:worthless:
You can't just drop a bomb like that and not share some details. What do you think of it, what have you done with it, what are you going to do with it etc!
Def
-
Oh man, so many toys, so little money :facepalm:
I can only get the previous model locally at a very unfriendly price.......and I badly want to replace my WD media player with a Raspberry.
My bat-sense is telling me these devices are a big part of the future. :whistle:
-
:worthless:
You can't just drop a bomb like that and not share some details. What do you think of it, what have you done with it, what are you going to do with it etc!
Def
I've plugged it in but not been successful getting the NOOBS image mentioned in the quick start guide (https://www.raspberrypi.org/help/quick-start-guide/) to do anything but display a big coloured square...
My power supply is 5v 2A which is apparently what I need, but all I have on hand for microSD cards is a 32gb SDHC class 10 card (http://www.samsung.com/us/computer/memory-storage/MB-SP32D/AM) or a much lower class 2gb card or two that have been collecting dust... trying a clean format and copy off the wifes machine to the SD card to see if that's any better... hope my board isn't DOA. :ahhh
-
and if this makes you feel more fulfilled...
-
Apparently it was the sd card formatting, since it's now alive and installing raspbian
-
Apparently it was the sd card formatting, since it's now alive and installing raspbian
great, glad it was not a real hardware issue.
Raspbian is not bad, but I seem to enjoy RetroPie a lot more.
-
and if this makes you feel more fulfilled...
Thanks.
I feel much better now.
Def
-
my first projects will likely be a soft reset switch and a power down switch since that's something it doesn't have by default, and I feel unplugging it is not really the best option.
-
I suppose that makes some sense.
I guess a hammer is out of the question too? :P
Def
-
because the power is supplied by a micro USB jack I don't want to cause it too much wear from plugging/unplugging cables. Honestly it should come with a switch... but nothing some leftover PC parts won't fix :D
-
because the power is supplied by a micro USB jack I don't want to cause it too much wear from plugging/unplugging cables. Honestly it should come with a switch... but nothing some leftover PC parts won't fix :D
I bought some of these for the built in switch
(http://www.haoyuelectronics.com/Attachment/USB-Power-Cable/1.jpg)
-
Interesting, but I don't think that will provide the soft shutdown, only a power cut/reset?
I saw some guides online but I think it was the older model. I haven't had a chance to do much else after testing it the other day as I had a bunch of other stuff pop up.
-
If I had a kid, this might be a valid project for a RPi:
http://geektyrant.com/news/dad-builds-incredible-spaceship-control-room-bed-for-his-son
:ahhh
-
Some cool news:
http://thehackernews.com/2016/05/android-Raspberry-Pi3.html
Looks like Raspberry Pi3 is going to be an Android device soon! Guess what device just took a step up on my priority list?
Def
-
This looks interesting
https://cayenne.mydevices.com/cayenne/signup?utm_source=facebook&utm_medium=cpc&utm_campaign=trkconv-w
-
my 1.50 eur case arrived from China finally... so my RPi is now protected! I didn't get anything fancy, just a plain black plastic case...
-
Is it going to have a mythosaur skull on it soon? :D
:worthless:
Def
-
tbh all I did was pop my rpi into the case and put it back in the rpi box :facepalm:
https://pi-hole.net/
interesting project too...
-
Another cool project
http://www.makeuseof.com/tag/showerthoughts-earthporn-make-inspiring-raspberry-pi-photo-frame/
-
That is pretty cool!
Def
-
Well, this happened (http://uploads.tapatalk-cdn.com/20160819/18bacf44ac65fff0b2b27994d3953a0f.jpg)(http://uploads.tapatalk-cdn.com/20160819/6af95c4bc4c0aacb46ccea50f204da60.jpg)
Paid $90 at B&N for a kit containing an RPi-2, 8gb flash drive with NOOBS and Linux, a 2 amp 5 volt power supply, a case, an HDMI cable, and a ton of instructions that came in very handy
Sent from my outdated communication device using an obsolete application
-
Oooh, minecraft pre-installed too?!?!
Sent from my outdated communication device using an obsolete application
-
That's awesome!
One question though.... how do you train a horse in Minecraft? :think:
Def
-
That's awesome!
One question though.... how do you train a horse in Minecraft? :think:
Def
Training a horse is simple: in the PC and Pocket Edition versions, you just saddle a horse and ride it until hearts come on the screen, then the horse is tamed. Same for PS3 and 4. Possibly Xbox.
Sent from my outdated communication device using an obsolete application
-
Thanks- there is a lot of call for that knowledge in South Park, Colorado.....
Def
-
I have one of these in a box. I bought it because I followed the advice of a friend - we were going to use it as a controller to do online backups of my NAS to the cloud.
But then we found a better way and I have no idea what to do with the the Raspberry Pi now :think:
I'm not 100% sure where it is even....
-
:ahhh
https://www.raspberrypi.org/magpi/issues/57/
-
Well, I picked my pi up again and started thinking (never a good thing), why don’t I make this thing more portable? I’ll keep you guys posted on my progress.
Sent from my iPhone using Tapatalk
-
Plugged mine in again today actually, and put retropie on it again, I still don't have a controller for it :facepalm:
-
Well, my end result is far better than anticipated (https://uploads.tapatalk-cdn.com/20180125/c6c08f9b8026bc47afbc97ca6c86451c.jpg)(https://uploads.tapatalk-cdn.com/20180125/0a01315f7a48fc566799d35c7b93aa6d.jpg)(https://uploads.tapatalk-cdn.com/20180125/a7c4e520a26e114ceb4d3b9f39848c5d.jpg)
Sent from my iPhone using Tapatalk
-
I've been playing with a Raspberry Pi for a few months but hope to use it for a frequency waterfall display for my ham radio. For now all it is doing is being a countdown clock until I retire - getting close!
(https://i.imgur.com/1K7jdna.jpg)
-
Finally got my hands on a Bluetooth game pad (wetek/amazon flash sale) and messed around with retropie for a bit
Ah nostalgia
-
Finally got my hands on a Bluetooth game pad (wetek/amazon flash sale) and messed around with retropie for a bit
Ah nostalgia
:like:
-
:like:
I really should try do something with my Pi...
But I left it so long it’s practically obsolete. :facepalm: (original model B)
Gives a new definition to “lazy smurf”.
(By the way, I’ve noticed new emotions in the create post screen? :dunno: :woohoo: :hatsoff: )
-
:like:
I really should try do something with my Pi...
But I left it so long it’s practically obsolete. :facepalm: (original model B)
Gives a new definition to “lazy smurf”.
(By the way, I’ve noticed new emotions in the create post screen? :dunno: :woohoo: :hatsoff: )
Mine seem to always be able to run KODI in some form although it can also require some real patience too.
-
Using mine for HomeBridge. So none HomeKit compatible products will work in the Apple Home app.
Added 33 extra accessories this way…
Love how 'smart' my house is now!
-
I started turning mine into a Google Assistant but might opt for Amazon Alexa.
-
another thing of interest:
https://www.slashgear.com/steam-link-raspberry-pi-app-valve-hardware-04556743/
Seems although the SteamLink hardware is discontinued, you can run it on an RPi!
-
I guess I am jumping into the Raspberry Pi pool. Just not sure if I am going into the deep end and way over my head, or the shallows where I should be ok. I have a CanaKit retro gaming kit with a 3 B+ heading my way. Going to play with RetroPie and possible Linux which I know nothing about. I was hoping to stay away from stores tomorrow...in my city, boxing day is not allowed (I think we just might be the most backward thinking city in Ontario), so everyone and their dog will be out tomorrow. I see a few microSD cards on sale. :facepalm:
-
Wow...that came faster than I was ready! Just got part of my kit in today.
First up is the CanaKit Retro Gaming Kit.
Ok...the box isn't all that big.
(https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6518small_zpsnjvxxidl.jpg) (https://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6518small_zpsnjvxxidl.jpg.html)
Hmm...the Amazon site did say there was a case included?
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6519small_zpswylgedxl.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6519small_zpswylgedxl.jpg.html)
Good info comes with the kit.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6520small_zpsqtoddv8x.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6520small_zpsqtoddv8x.jpg.html)
Hmmm...ok
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6521small_zpspkclsewv.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6521small_zpspkclsewv.jpg.html)
I was told the CanaKit power supplies are some of the best. Check.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6522small_zpstn9x0wkk.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6522small_zpstn9x0wkk.jpg.html)
The kit comes with a pair of aluminium heat-sinks, a screwdriver and screws.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6523small_zpskw87i5t6.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6523small_zpskw87i5t6.jpg.html)
Here is the Raspberry Pi 3 B+ board...ok...will not open this until I am ready...but I must say, I was not prepared for the size of the board. I was expecting something a little larger. :facepalm:
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6524small_zpse4drb3s5.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6524small_zpse4drb3s5.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6525small_zpsqokjgifo.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6525small_zpsqokjgifo.jpg.html)
The included microSD card reader.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6526small_zpsuitzmisb.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6526small_zpsuitzmisb.jpg.html)
At the bottom is even more instructions. I know I will be needed all the info I can get.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6527small_zpsr8iuplg1.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6527small_zpsr8iuplg1.jpg.html)
The kit comes with 2 not that stellar controllers. How do I know. if I didn't have the actual SNES mini controllers, I just may have been oblivious to the lack of quality. These will do for now...and I will have more USB type controllers in the near future. I believe the PS mini USB controllers might work as well.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6528small_zpsjwfltlsy.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6528small_zpsjwfltlsy.jpg.html)
Hmm...what was in that white box...you have got to be joking with me...is this the case?
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6531small_zpspnmh9ea9.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6531small_zpspnmh9ea9.jpg.html)
Smallest thing ever. There is room for a fan I guess, and the Raspberry Pi would be completely open to the elements in there. One side opens much like the NES did. :rofl:
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6532small_zpsl6usjrpw.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6532small_zpsl6usjrpw.jpg.html)
Just to show you the scale here...case meet Victorinox knife. I am very glad that I listened to my very knowledgeable colleague in buying a better case. More on that later.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6533small_zpspadtp5hy.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6533small_zpspadtp5hy.jpg.html)
I bought one Samsung 128 gb card off of Amazon. I know that it could possible be a fake (see differences in packaging in this photo...but I will need to inspect it more...I did my research, but the price was ok). The CanaKit does come with a Samsung 32 gb card as well. Today being boxing day, there were a few good sales on micro SD cards...so I bought a few more. I made sure the ones I bought where all Class 10 U3 cards.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6535small_zpsdtrupnox.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6535small_zpsdtrupnox.jpg.html)
I am very happy that I don't have to use that little case that came with the CanaKit. I mean, it is half the size of the mini consoles. Here is the larger and I think better solution.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6536small_zpsbvlbhihb.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6536small_zpsbvlbhihb.jpg.html)
The box is a little larger...which is a bit reassuring.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6537small_zpshfvmsakt.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6537small_zpshfvmsakt.jpg.html)
The power supply has an on/off rocker switch built into the cord. Th heat sinks appear to be a bit more robust, as there is an included fan.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6538small_zpsrsgmwq5j.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6538small_zpsrsgmwq5j.jpg.html)
Inside the cardboard box is another box, printed to resemble the case inside.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6540small_zpsnojxznko.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6540small_zpsnojxznko.jpg.html)
Here is the case proper along with the instruction sheet.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6541small_zpsc1m8bb4o.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6541small_zpsc1m8bb4o.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6542small_zpsw4tdovmk.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6542small_zpsw4tdovmk.jpg.html)
This case offers a lot more than the bare bones one that came with the CanaKit. Better dust protection for one, but also has a functioning power and reset button. This is the Plus case that allows for safe rebooting.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6544small_zpszq6jprlc.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6544small_zpszq6jprlc.jpg.html)
On the bottom of the case is a cute little storage compartment for extra micro SD cards.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6545small_zpszcpehctv.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6545small_zpszcpehctv.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6547small_zpsbtnh8gpf.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6547small_zpsbtnh8gpf.jpg.html)
Inside of the case are several daughter boards.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6548small_zpsizgxiqoa.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6548small_zpsizgxiqoa.jpg.html)
I noticed a small spot of rust on one of the USB connectors.I examined everything and haven't noticed any moisture damage anywhere. :think: I will try to build a system sometime soon and if there are issues, I will return the case. I hope I do not have to.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6550small_zpszfll1evy.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6550small_zpszfll1evy.jpg.html)
So there you have it. I have another case like the second one in shipment, but that one isn't the plus case with the safe reboot (I bought this case first before I learned that some cases are newer designed as a plus version). That order does have 2 PS3 type controllers however.
Should be interesting.
-
I've had my eye on the nespi cases, I think they look fantastic.
Although I would probably rather build a full-size arcade machine tbh, which kind of negates the need for such a case.
-
The Nespi case fits right in with the other official mini consoles. I don't have the room for a full size or even bar top arcade system...even though it has been my dream to own one as well as a full sized pinball machine since as far as I can remember. I still have my soccer Pachinko machine...which at the time was the closest I could get to one lol.
That other case is minimal at best. Very happy I listened to my friend. I believe the CanaKit micro SD card comes with built in software as well. Going to read a lot before I play with the system.
Based on my friend's instructions, I downloaded SD Formatter from the SD Association, and etcher.io.
-
I already have a good set of disk tools built into my Ubuntu install.
The annoying things for me about working with the pi are:
The microSD slot is an epic PITA to get cards out of, even more so in the case I have, I typically have to start it with a utility knife. I wish it had an eject tab or was spring loaded.
Also, I wish it came with a power/reset switch by default (I think the nespi cases have one) rather than having to pull the power cord.
I wish the input/output jacks were on opposite ends, ie power/video/audio/lan opposite the USB rather than 90-degree separation. This way I could have all my main cables running back and the USB in the front for keyboard/mouse/gamepad. This could be solved by using a powered USB hub and mounting the whole thing in a larger enclosure... but obviously, I'm thinking of trying to keep it simple.
I realize most of these issues are moot with a nespi case (or the superpi cases!)
Can you swap sd cards easily in the nespi or do you have to pull the pi out each time?
-
There is an exterior SD slot on the nespi case.
Just checked my Amazon purchased Samsung EVO Plus 128 gb SD card...and it looks very legit based on what I can see and have read online...whew. Buying SD cards off of Amazon is like playing Russian roulette. :facepalm: :tu:
-
I'm really liking the look of the famcom styled superpi case vs the North American Super Nintendo styled one
-
I saw a Sega Genesis case as well as an Amiga.
-
Ok..today was build day. I had a few minor hiccups.
I dry fitted the Pi to the case, and then though it might be a good idea to secure it to the bottom half of the case. Mind you, I did this without plugging all those cables into the Pi...that was a mistake. I had to unscrew the Pi to properly plug in the network cable. :facepalm:
(https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6551small_zpsbfh24bcc.jpg) (https://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6551small_zpsbfh24bcc.jpg.html)
I read the instructions and looked at the photo a few times to install the little fan.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6552small_zps4jjnqovj.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6552small_zps4jjnqovj.jpg.html)
Then I noticed there were 3 heatsinks that came with the Retroflag NesPi case. :think:
I had to look online to find out that the flat copper one goes underneath the Pi. :facepalm:
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6553small_zpsmglrzpzh.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6553small_zpsmglrzpzh.jpg.html)
I had to unscrew the two screws (I wonder why they didn't provide 4 (probably for idiots like me who have to keep removing said screws for something or another, and the instructions showed that both screws go where they are illustrated in the photograph). After placing the bottom heat-sink (peeling that blue tape was hellafun), the two top ones were next. I used a wrung almost dry alcohol pad to prep the chips before heat-sink installation. Time to screw it back in once again.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6555small_zpscktvd7yr.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6555small_zpscktvd7yr.jpg.html)
I like this case. I am not quite up to installing an OS or even RetroPi on it as of yet.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6556small_zpsm4phgfk7.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6556small_zpsm4phgfk7.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6557small_zpsgv5lns08.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6557small_zpsgv5lns08.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6558small_zpsj75oyfmd.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6558small_zpsj75oyfmd.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6559small_zpsazrlpvgg.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6559small_zpsazrlpvgg.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6560small_zpsyvp9adhb.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6560small_zpsyvp9adhb.jpg.html)
Time for a few comparison photos with the CanaKit case which was included in the kit. As you can see, it is super small, and doesn't offer much in board protection.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6561small_zpsfqvxhs3u.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6561small_zpsfqvxhs3u.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6563small_zpslfqvsqrb.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6563small_zpslfqvsqrb.jpg.html)
(https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6564small_zpsuzyptge7.jpg) (https://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6564small_zpsuzyptge7.jpg.html)
Here is the best part, on the CanaKit case, the front flap will not stay open...meaning it will always clamp down on your cables...which is probably a good thing as the Pi is wide open from that end...still fiddly I would think. I had to use tweezers to keep the slot open. Never mind that the two buttons on the front of the CanaKit are just molded plastic and nonfunctional.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6562small_zpsgdwgp2uf.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6562small_zpsgdwgp2uf.jpg.html)
Finally found the included SD card from the CanaKit.
.(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6566small_zpscyfonmx6.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6566small_zpscyfonmx6.jpg.html)
Next step is to read more before I play with the software end of things.
Must say, this does fit in nicely with the other mini consoles.
(https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6567small_zpsdqwsuuar.jpg) (https://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6567small_zpsdqwsuuar.jpg.html)
-
Another comparison...Nintendo Classic Mini versus NesPi.
(https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6568small_zps8zztn6s5.jpg) (https://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6568small_zps8zztn6s5.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6569small_zpsewdyk0dq.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6569small_zpsewdyk0dq.jpg.html)
And just got something finally running...
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6571small_zpswudssbcn.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6571small_zpswudssbcn.jpg.html)
:woohoo:
-
Very cool, Chako 8) Retropie is so much fun to play and reminisce :dd: I need to get mine hooked back up and reload it on my Pi :cheers: Love that NESPi case as well :like:
-
:hatsoff:
-
Just got this in..a Retroflag MegaPi case.
(https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6573small_zpse8smzllw.jpg) (https://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6573small_zpse8smzllw.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6574small_zps4csl7rve.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6574small_zps4csl7rve.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6575small_zpspbcuogb6.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6575small_zpspbcuogb6.jpg.html)
I did notice that they included a much nicer Phillips driver with the MegaPi case as opposed to that included with the NESPi case.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6578small_zpseopimd0g.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6578small_zpseopimd0g.jpg.html)
I haven't built the MegaPi system yet...but here is a shot of it next to the NESPi + case.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6579small_zps7eptugez.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6579small_zps7eptugez.jpg.html)
I also received this kit as well...but it came with a 3 B as opposed to the 3 B+ that was advertised. After doing a bit of research, there aren't many differences between the two so I have decided to not return it.
(https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6581small_zpszk6x13qh.jpg) (https://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6581small_zpszk6x13qh.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6585small_zpst1wcvxs1.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6585small_zpst1wcvxs1.jpg.html)
-
I just finished the install and I must say, this case was a bit more difficult to shoehorn everything in it. The MegaPi is slimmer and you have to install the Pi upside down. Minor difficulties occurred trying to bend the stiff power wires and also bend the two USB leads into such a tight space, made all the tighter due to the installation of the fan. The case is a lot nicer to look at once everything is pushed and coaxed into place. Love the better and larger card storage opened via the volume lever. The Ethernet and 2 USBs are hidden behind a corner of the case that slides off to expose them. There is a small hole that can be uncovered if you need to pass a cord through that removable corner piece.. Not as convenient as that found on the NESPi which are all on the front accessed via a very nice spring loaded trap door. A huge plus is the micro SD card slot that is hidden behind another spring loaded trap door. You have to get a fingernail under it to pry it open, but once opened, it stays as such. A nice touch...but an even nicer touch is the easier access to the SD cards. On the NESPi, it is difficult. On the MegaPi, the card sticks out a little more making it a lot easier to pull it out, and to also push one in. The NESPi card slot has room to push an SD card below the port, and into the case. They fixed that with the MegaPi as there isn't enough room for this to happen. I think the MegaPi just might be my favorite case so far. The NESPi does have a lot more room for air movement inside the case. I think it might be the better solution is you are thinking of overclocking the Pi as you could fit a larger fan assembly or heat-sink...if that is even needed. The MegaPi case however looks a bit more polished and decorative. The larger SD storage that can store multiple micro SD card adapters let alone a load of micro SD cards is a winner compared to the much smaller one found on the NESPi. To be fair, the NESPi can store around 10 micro SD cards...but the one on the MegaPi is on a totally different level.
(https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6592small_zpsnelwvqqy.jpg) (https://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6592small_zpsnelwvqqy.jpg.html)
Why do I feel like I should buy a couple more Raspberry Pi 3 B+ board and get a SNESPi and FamiPi cases to go along with the micro console collection. :think: :facepalm:
-
While it's great they try and reduce the footprint as much as possible on the mini systems, a little breathing room wouldn't be a bad thing.
-
While it's great they try and reduce the footprint as much as possible on the mini systems, a little breathing room wouldn't be a bad thing.
:iagree: it looks pretty cool though 8)
I have been trying to decide which wireless controller would be best :think: any suggestions, I have heard the ones for Xbox and some of the Playstation controllers are just the thing but does anyone have a preference or is there any different brands that I haven't noticed that might be better :think: Logitech is the brand I have for my PC and the one I have used but it has a wire and I would rather have a wireless one so I could sit back a bit further :cheers:
-
I forgot I even had this?
Got it pretty cheap from Microcenter and was setting them up for KODI mainly.
Not terrible but not great either but plenty entertaining for sure!
(https://uploads.tapatalk-cdn.com/20190105/e0e1d95f071a1bb1a47a4bdaf54f1570.jpg)(https://uploads.tapatalk-cdn.com/20190105/f64cd73232c183ac97a75ed3d8f48ebe.jpg)(https://uploads.tapatalk-cdn.com/20190105/2b5b09be772dd1ad28476c5b53dfd27b.jpg)
-
While it's great they try and reduce the footprint as much as possible on the mini systems, a little breathing room wouldn't be a bad thing.
:iagree: it looks pretty cool though 8)
I have been trying to decide which wireless controller would be best :think: any suggestions, I have heard the ones for Xbox and some of the Playstation controllers are just the thing but does anyone have a preference or is there any different brands that I haven't noticed that might be better :think: Logitech is the brand I have for my PC and the one I have used but it has a wire and I would rather have a wireless one so I could sit back a bit further :cheers:
I have a wetek Bluetooth controller I picked up on amazon on sale, it also works as a pure usb controller if needed, most new controllers should be similar with a retropie setup
-
Thanks Whoey :salute: I'll give those a look :tu:
-
If you have access to newer bluetooth console controllers they should work.
-
I dont have any of the newer controllers :-\ that's why I was wondering :cheers: didn't want to buy something and it not work if I could ask first :tu:
-
I just got a Afterglow wireless PS3/PC controller made by pdp. Works well...uses a USB dongle.
-
yup, go with whatever looks/feels/fits the budget right for you, if it's PC compatible it should be fine.
https://hometheatrelife.com/wetek-gamepad-review/
I got mine for less than half of what they say in that review, so I think it's a winner.
-
Just pulled the trigger on two more Pi 3 B+ boards, a Retroflag SNESPi case, and another power supply with an on/off switch built in.
-
Well that case came in. At least the Pi B + didn't have to go in upside down like that SEGAPi case.
(https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6602small_zpsz0tsg2qf.jpg) (https://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6602small_zpsz0tsg2qf.jpg.html)
Two of the bottom screws are going to be hidden by rubber feet.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6604small_zpsk5x6hcpm.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6604small_zpsk5x6hcpm.jpg.html)
The place to hid extra micro SD cards is small...but so again are the micro SD cards.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6605small_zpsqtulpxsj.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6605small_zpsqtulpxsj.jpg.html)
So far, I have collected the following RetroFlag cases:
1. NESPi (NES)
2. NESPi Plus (NES with safe shutdown)
3. MegaPi (SEGA with safe shutdown)
4. SuperPi (Super NES with safe shutdown)
All I am missing is the Japanese Super Famicom case.
This goes with my other mini cases that are not Raspberry Pi driven such as the official NES mini, the official SNES mini, a knock off NES mini by Coolbaby, the SEGA flashback mini, the Atari 2600 flashback mini, the C64 mini, and the official Play Station Classic Mini.
Not sure why but I do like these little retro gaming consoles.
-
I just received a somewhat large package today...
Just got in the last of the RetroFlag cases...a SuperPi Case-J.
I get these cases from GeeekPi, and they always include a felt storage bag.
(https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6632small_zpsdbk8ljdw.jpg) (https://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6632small_zpsdbk8ljdw.jpg.html)
The packaging is printed to resemble the case inside.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6634small_zpsc8bgo5hs.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6634small_zpsc8bgo5hs.jpg.html)
Inside, the case is well protected.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6637small_zpsdsw4ayfs.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6637small_zpsdsw4ayfs.jpg.html)
Here is a photo of all of the RetroFlag cardboard boxes I have.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6639small_zpsyvgabjo0.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6639small_zpsyvgabjo0.jpg.html)
The inside of the SuperPi Case-J.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6641small_zpsjw4jhkab.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6641small_zpsjw4jhkab.jpg.html)
All of the RetroFlag cases have a built in Micro SD card storage. This case is very similar to the Super Pi Case-U which is basically a North American SNES. Press the eject button and the flap pops open via a spring mechanism.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6643small_zpssjowx7lz.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6643small_zpssjowx7lz.jpg.html)
The back of the case.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6644small_zpsjiud4ltt.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6644small_zpsjiud4ltt.jpg.html)
The Micro SD card slot. Time will tell if this is a good design compared to the other models.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6645small_zpsssnrw12j.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6645small_zpsssnrw12j.jpg.html)
Much like its sister case, the SuperPi Case-U, the Ethernet and 2 USB ports are hidden behind a removable door.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6647small_zpsvavou3yu.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6647small_zpsvavou3yu.jpg.html)
I also ordered a Wii U controller adapter after doing a bit of research. I found a Wii U Pro controller at one of the local pawn shops after viewing a video about how someone really thought it was the perfect controller for a RetroPi set up. However, after buying the controller, I looked further to find out how such a device worked and found out I also needed this adapter. Going to try this out later this week. If it works, could be my go to setup.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6650small_zpsuoxrzrzf.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6650small_zpsuoxrzrzf.jpg.html)
I was also curious to see if I could take one of my little Raspberry Pi s RetroPi computers to work and see if I could use the projector. Yeah, that didn't quite work as there is no HDMI hookup on the work setup. Found this and can't wait to see if I can use it with the projector. This HDMI to VGA adapter could be the thing I needed for this to work.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6651small_zpsyuur3fqt.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6651small_zpsyuur3fqt.jpg.html)
I also found out that having a USB full size keyboard is a pain to use and store away. I am hoping this will work better.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6653small_zpsfnr6l19s.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6653small_zpsfnr6l19s.jpg.html)
Looking to populate the last RetroFlag case with another Raspberry Pi 3 B+, I got one of those limited time deals pop up on screen. That was a first for me. This deal looked real good as it was only 10 dollars more than the CanaKit 3 B+ with non on/off power supply. I always like to get the ones with the built in switch. This kit came with the wanted power supply, plus another HDMI cable, a clear plastic case, two copper heat-sinks, a micro SD to USB adapter, and a 16gb micro SD card. For an extra 10 bucks, I deleted the usual kit for this one. I had never heard of ABOX, but the cardboard case it came in is very thick and sturdy.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6655small_zpsk9m0amtc.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6655small_zpsk9m0amtc.jpg.html)
Sliding the top off, you see the Raspberry Pi board in its own foam cutout and box.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6656small_zpsfrrpd2mm.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6656small_zpsfrrpd2mm.jpg.html)
Under the motherboard is the plastic case and manual on one side, and all the other goodies in another cardboard insert.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6657small_zpsy3byz5wi.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6657small_zpsy3byz5wi.jpg.html)
The case is one of those clear acrylic deals. I bought a separate Pi 3 B to inhabit this case.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6659small_zpsppgigba8.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6659small_zpsppgigba8.jpg.html)
Here are all the other goodies.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6661small_zps78byt5h9.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6661small_zps78byt5h9.jpg.html)
And last but not least, a Pi 3 B for that clear plastic case.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6662small_zpsmqe0ajao.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6662small_zpsmqe0ajao.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6663small_zpsqeqopz3j.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6663small_zpsqeqopz3j.jpg.html)
I plan on building both systems later this week. Should be fun.
-
The RetroFlag SuperPi Case-J is a little different in regards to the installation of the Raspberry Pi and fan. I found that I could not install the fan without removing one of the daughter boards.
(https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6665small_zpsmqzggz7t.jpg) (https://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6665small_zpsmqzggz7t.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6666small_zpsbmrr6nfo.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6666small_zpsbmrr6nfo.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6667small_zps8afolzfx.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6667small_zps8afolzfx.jpg.html)
At least the Pi does not install upside down like it does in the SuperPi Case-U.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6668small_zpsiwejfqwh.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6668small_zpsiwejfqwh.jpg.html)
And it is official, I absolutely hate that clear case the ABOX kit comes with. Not only was it fiddly to install, it really does nothing to protect the motherboard. I think the SuperPi Case-J is my favorite design so far in terms of looks.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6670small_zps591xa9af.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6670small_zps591xa9af.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_6671small_zps6k1veeco.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_6671small_zps6k1veeco.jpg.html)
-
Given that you have most of the systems there probably won't be much need to swap sdcards as you can probably run each one as the system it is rather than the jukebox type setup that retropie is intended to be.
I'm still on the fence with most of these cases, I think I may end up with some sort of Marvin the paranoid android or similar setup with all the guts in it for a google box or alexa or both.
-
Agreed. Should keep to a minimum any wear and tear on both the SD card slot as well as the SD cards.
-
would be neat to see a setup where the core retropie system runs on the sd card (and thus not needing removal) and the library/cartridges are actually USB sticks...
-
would be neat to see a setup where the core retropie system runs on the sd card (and thus not needing removal) and the library/cartridges are actually USB sticks...
I have mine setup like that :cheers: Just put all my games on the stick and kept the micro SD in the Pi and just swap the stick in and out if I had to add any games :cheers: I had a triple boot system on it as well, it had Retropie, Kodi and a GUI :cheers:
I do really like all these cool cases though and need to get the Pi back out and mess with it :ahhh I haven't had it out in a while and need to get reacquainted with it :salute:
-
Last time mine was out I was trying to setup a homebrew google assistant, as mentioned, it kinda worked, but perhaps not the way I would have liked it to.
-
I hope you get it setup like that because it would be cool to turn a Pi into an Assistant :cheers: :like:
-
I use my Pi for Homebridge, to make products 'HomeKit compatible'.
Ordered a bunch of Xiaomi devices on Ali Express and it works perfectly. It even tells me when I need to water the plants.
-
I use my Pi for Homebridge, to make products 'HomeKit compatible'.
Ordered a bunch of Xiaomi devices on Ali Express and it works perfectly. It even tells me when I need to water the plants.
Very cool that you got them to all work together :tu: :like:
-
I might have gone a little overboard.
(https://uploads.tapatalk-cdn.com/20190123/6cf14884b308ca311680cf714285b1fa.jpg)
(https://uploads.tapatalk-cdn.com/20190123/9acd0cd24905af1b3499a2572a8174e0.jpg)
(https://uploads.tapatalk-cdn.com/20190123/eaaf9dca7bf8170c3a17682e619d8dc7.jpg)
LOL, and the plant sensors and wall switches aren't even included on this page.
-
I think Overboard is more a way of life really.
Especially on here!
Carry On. :like:
I might have gone a little overboard.
(https://uploads.tapatalk-cdn.com/20190123/6cf14884b308ca311680cf714285b1fa.jpg)
(https://uploads.tapatalk-cdn.com/20190123/9acd0cd24905af1b3499a2572a8174e0.jpg)
(https://uploads.tapatalk-cdn.com/20190123/eaaf9dca7bf8170c3a17682e619d8dc7.jpg)
LOL, and the plant sensors and wall switches aren't even included on this page.
-
Ah wow :dd: totally cool though 8) and as ez already said it's normal for here :D
-
Yep, I'm a gadget nerd…
-
The new Raspberry Pi 4 model B is out :o :ahhh it look like some pretty good specs :dd: Does anyone have any thoughts about the new upgrades? :cheers:
-
I still have an original B that I'm too lazy to do something with. :facepalm:
Any simple ideas? Something to kick start my lazy bum. :D
-
Media center or game emulation :D
-
I have used mine for both and also played around with it as a desktop but lately it is just sitting on my desktop collecting dust :whistle: :facepalm:
Guess I need to dust it off and mess around with it some more :D
-
The new Raspberry Pi 4 model B is out :o :ahhh it look like some pretty good specs :dd: Does anyone have any thoughts about the new upgrades? :cheers:
I have a 2B that I've had for 4-5 years collecting dust, and am currently building it into an emulator for gaming since I haven't done nearly as much as I'd planned (I had a project book that I'd bought alongside the Canakit I got the Pi in). I was going to get the 3B+, but now that the 4B is out, I figure I'll get it instead . At $55 with 4GB of RAM isn't bad at all! And maybe a few Pi Zeros at present for robotics projects and the like--at $5 a pop they are cheap!
The 2B is OK, but is limited by the fact that it only has 2 USB outlets (meaning if you've got a keyboard and mouse, you can't also have a USB stick for loading up programs and such. Not to mention no onboard Bluetooth or Wifi.
-
I have one of the small keyboards with a touchpad that has a usb dongle :cheers: that way it only uses one usb space and then you can use the other space for usb to load things but of course then you need a wired controller :think: so load things, then restart and plug controller in :D
Can't wait to see some projects, cody :cheers:
-
I've got my original Pi B set up as a headless ( :ahhh) remote computer. So I can tinker with it from the comfort of my laptop on the couch. :P
I was trying to set it up as a WiFi access point, but was unsuccessful. Need to learn more!
Bought a Pi Zero W and a camera! I forsee some fun in the future, trying to integrate that into a robot.
-
Sounds interesting :like:
:popcorn:
-
Sounds interesting :like:
:popcorn:
Thanks. :cheers:
I'd like to learn C before Python, so I'm messing with an Arduino microcontroller right now.
Am I allowed to mention Arduino in the Raspberry Pi thread? :dwts:
-
Pretty sure thread derailment is part for the course on MTO
-
Haha!
Got a new Pi today. So I'm back in the modern age. :dd: And a camera!
I can't believe this tiny Pi Zero W has the same performance as the original rev 2 B, plus integrated wireless, for 1/3 the price! :o
(https://forum.multitool.org/index.php?action=dlattach;topic=43580.0;attach=444850)
-
Pretty sure thread derailment is part for the course on MTO
:iagree: :like:
-
Nice one, Pabs :tu: can't wait to see what you ski with it :like:
-
Nice one, Pabs :tu: can't wait to see what you do with it :like:
-
So far, all I've done with it is to solder on the header pins and setup the camera so that I can access the feed wirelessly on my LAN.
Too busy with my robot chassis. :D
-
:like:
:popcorn:
-
(Quick question, who do I PM for an MTO gallery account? :think: )
Okay, small step...
Wired the ultrasonic sensor to my Pi and copied a python script, per a guide.
And it worked, once I fixed the code grammar mistakes that I made. :D
The sensor:
(https://forum.multitool.org/index.php?action=dlattach;topic=43580.0;attach=445413)
The terminal output:
(https://forum.multitool.org/index.php?action=dlattach;topic=43580.0;attach=445411)
-
:ahhh
Man I would love to play with one of those!
There is actually a shop selling (no doubt older models) then in town, but they are very expensive, not on the cards currently.
-
Registered shipping to your place would be €16 for 500 grams of Pi. (1 Zero W is like 10grams)
Would it be worth looking into importing a bunch and reselling the extras?
-
You can message Grant or Whoey about an MTO Gallery account :cheers:
-
Phew!
Put together a chassis that wouldn't shake itself apart, and hooked up my Pi Zero and a Camera.
Now I can rove around the house remotely!
(https://forum.multitool.org/index.php?action=dlattach;topic=43580.0;attach=445981)
-
Very cool :o :like:
-
Imaging hooking up an air-soft pistol to that with some sort of rudimentary aiming device.and robotic trigger pull.
-
Sentry bot! :D
It only needs a bit of extra software stuff to be controlled over the internet...
-
:popcorn:
-
I have my Pi Zero W and the add-on camera strapped to my glider.
(https://imgur.com/dY63WZQ.jpg)
The integrated WiFi antenna appears to be able to hold a connection at pretty far distances. :dd: 50 meters at least.
Never fails to amuse me when I open my laptop and ssh into my airplane. :)