Multitool.org Forum
Tool Talk => Swiss Army Knights Forum => Topic started by: Myron on April 12, 2019, 03:21:03 PM
-
One of my greatest Life Quandaries is that I really prefer to carry an Alox SAK. I am usually to be found with either a Pioneer, a custom Voyageur, a custom Super Cadet, or any of their ilk. The only thing I miss about having a cellidor-scaled SAK on my person is the toothpick. Although I appreciate some of the custom solutions I've seen out there (e.g., Syph's swing-out tray) I've never been truly convinced of these, and they just seem so complicated. Yes, you can always just carry a toothpick loose, or throw a Classic in your pocket, but I find they get lost or I forget to move it over to today's pants, etc. etc.
So, as I was laying in bed with Juniper the Snoring Wonder Dog this morning, in that half-awake-half-asleep time when your mind wanders and you think about all kinds of weird things and no doubt access different parts of your brain that are not accessible to you during the waking hours, I had a vision! My wallet is another thing I always have on my person, and it could be easily modified to carry a Vx toothpick without compromising the wallet's function or carry-ability.
Since another of my interests is leather work, and the one I'm carrying now is a design study/production prototype I built out of shell cordovan, I didn't mind altering it for the project. Check this out:
(https://i.imgur.com/XxFBPxH.jpg)
The toothpick stays in place and is easily re-installed after use.
(https://i.imgur.com/yIkhYT1.jpg)
And when the wallet is folded up, it doesn't cause any problems.
(https://i.imgur.com/o7V4WLx.jpg)
-
Nice solution! You should half-sleep more often :rofl: Should also be easy to clean :like:
-
One of my greatest Life Quandaries is that I really prefer to carry an Alox SAK. I am usually to be found with either a Pioneer, a custom Voyageur, a custom Super Cadet, or any of their ilk. The only thing I miss about having a cellidor-scaled SAK on my person is the toothpick.
I had a vision! My wallet is another thing I always have on my person, and it could be easily modified to carry a Vx toothpick without compromising the wallet's function or carry-ability.
Since another of my interests is leather work, and the one I'm carrying now is a design study/production prototype I built out of shell cordovan, I didn't mind altering it for the project. Check this out:
The toothpick stays in place and is easily re-installed after use.
And when the wallet is folded up, it doesn't cause any problems.
Great solution and nice picks Myron! :like: :tu: :tu:
-
Great looking wallet.
I, too, love Alox, but miss the T&T. Nice solution there!
(And, yes, we need a Toothpick badge!)
-
The only thing I miss about having a cellidor-scaled SAK on my person is the toothpick.
Nice solution Myron. I have the same issue with my Midnite MiniChamp (LED and pen), and Alox Vagabond. I've gutted some paracord (just enough strands to make a good fit), and put the toothpick inside the paracord, as seen in the photo below.
I did a write up about it here:
https://forum.multitool.org/index.php/topic,77010.msg1683499.html#msg1683499
(https://live.staticflickr.com/7919/46589290504_e533eedfec.jpg)
-
Excellent, FoBo! :like:
-
Just :clap: elegant solution Myron :like:
-
Excellent, FoBo! :like:
:iagree:
-
Nice solution Myron. I have the same issue with my Midnite MiniChamp (LED and pen), and Alox Vagabond. I've gutted some paracord (just enough strands to make a good fit), and put the toothpick inside the paracord, as seen in the photo below.
Nice job FB! :like: :tu: :tu:
-
:iagree:
Thank you Mags, I believe that is some paracord you sent to me. :tu:
-
Thanks you guys! I'm leaving on a weekend trip with it later today, and will report how it travels and holds up. Happy to have this solution implemented!
Lisa, I love the paracord solution too!
-
Thanks you guys! I'm leaving on a weekend trip with it later today, and will report how it travels and holds up. Happy to have this solution implemented!
Lisa, I love the paracord solution too!
Thank you, I'll be eager to find out how your results.
-
Nice solutions! Here is mine
(https://uploads.tapatalk-cdn.com/20190412/e01a9123da59bab270cbb2c541bf1cd5.jpg)
(https://uploads.tapatalk-cdn.com/20190412/33cf53c62c8e4f046e24b21719659b41.jpg)
[It's not failure if you learn something from it]
-
That's my favorite, so far, Kottsie. I have to try to make one of those fobs, soon. :tu:
-
Thanks! It's a prototype but I'm really happy with it. But the paint is coming of the snap but it's copperish under so that's fine
[It's not failure if you learn something from it]
-
It's a prototype but I'm really happy with it. But the paint is coming of the snap but it's copperish under so that's fine better.
Fixed that for you! :pok:
-
Fixed that for you! :pok:
Haha thanks
[It's not failure if you learn something from it]
-
Toothpicks! Pah!
(https://i.imgur.com/vx7fc12.jpg)
-
I have bumped the badge request backstage.
Whoey is very busy atm so thank you for being patient about it.
:cheers:
-
Nice solutions, all. I find the toothpick essential. I’ll keep these ideas close.
-
Nice solutions! Here is mine
...
[It's not failure if you learn something from it]
Love this one, excellent solution. I've made similar pouches for change, but never thought about making one for t&t. Will have to add this to the to do list. :hatsoff:
-
Love this one, excellent solution. I've made similar pouches for change, but never thought about making one for t&t. Will have to add this to the to do list. :hatsoff:
It does the work it's supposed to and after living in my pocket with my alox for some time it looks like this.
Original prototype to the left and 2.0 unused to the right
(https://uploads.tapatalk-cdn.com/20190413/51ca77f26e3e990e794bb5fb0e4f9874.jpg)
[It's not failure if you learn something from it]
-
Kind of like the look of the original better, more streamline, slimmer carry. The 2.0 sure is a looker though. :cheers:
-
It does the work it's supposed to and after living in my pocket with my alox for some time it looks like this.
Original prototype to the left and 2.0 unused to the
Very nice solution and neat handiwork kottskrapa!
Myron
-
Very nice solution and neat handiwork kottskrapa!
Myron
To you too! Really liking that wallet of yours
[It's not failure if you learn something from it]
-
It does the work it's supposed to and after living in my pocket with my alox for some time it looks like this.
Original prototype to the left and 2.0 unused to the right
(https://uploads.tapatalk-cdn.com/20190413/51ca77f26e3e990e794bb5fb0e4f9874.jpg)
[It's not failure if you learn something from it]
You should sell them. Or make a few for a GAW or something.
I’d like to find someone to make these...
(https://uploads.tapatalk-cdn.com/20190415/ffdce41d561dcc0cd3e55d779c7fba2d.jpg)
Sent from my iPhone using Tapatalk
-
You should sell them. Or make a few for a GAW or something.
I’d like to find someone to make these...
(https://uploads.tapatalk-cdn.com/20190415/ffdce41d561dcc0cd3e55d779c7fba2d.jpg)
Sent from my iPhone using Tapatalk
Just have to build up the confidence and the skill first but the one to the right is third prize in the draw after the challenge
[It's not failure if you learn something from it]
-
What challenge?
Sent from my iPhone using Tapatalk
-
Apparently there's a keychain challenge in May. :popcorn:
https://forum.multitool.org/index.php/topic,80965.0.html
-
What challenge?
Sent from my iPhone using Tapatalk
Sry I thought that this was the challenge thread when u answered.. Paplo point to the one
[It's not failure if you learn something from it]
-
Apparently there's a keychain challenge in May. :popcorn:
https://forum.multitool.org/index.php/topic,80965.0.html
:tu:
-
Check out this 3D-printed tweezers + toothpick storage on a smartphone case done by /u/PistonPin on Reddit (https://www.reddit.com/r/victorinox/comments/bd644a/3dprintable_storage_for_victorinox_tweezers_and/):
(https://i.redd.it/rve1ie1fj9s21.jpg)
-
That's cool!
[It's not failure if you learn something from it]
-
Someone mentioned a SwissCard phone case. I'd love to see that done! Great link, thank you!