Multitool.org Forum
Tool Talk => Leatherman Tools => Topic started by: Aberdrew13 on December 02, 2016, 01:15:30 PM
-
With not having a current challenge that I'm in, I thought I'd give a new challenge a try!
I challenge myself to get through the 30 days with a MUT!
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161202_070025_zpscxr3pilu.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161202_070025_zpscxr3pilu.jpg.html)
-
Day 1:
First thing's first....I had to adjust the tension on the pocket clip to keep from destroying the edge of my pockets. I slid a t-shirt under the clip to protect the finish, and used a mini-pry bar to make the adjustments. I got it so that it's still tight on the pocket, but shouldn't shred them.
It will be carried clipped to my right back pocket due to the size.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161202_065952_zpsmv0s4me2.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161202_065952_zpsmv0s4me2.jpg.html)
-
I look forward to seeing how this tool holds up for the task of Etc. It having weapon centric tools and it not being geared towards the everyday Joe.
Sent from my SM-G935V using Tapatalk
-
:like:
-
Another challenge eh :D Good to see you get to use pliers this month ;) I am looking forward to this as well :cheers: I want to see if the MUT can hold it's own as the Signal did in Pietervns challenge thread :tu:
I am thinking you will be fine but by the end of the month you will definitely be able to tell us good or bad about the MUT :like: :like: :like:
-
Another challenge eh :D Good to see you get to use pliers this month ;) I am looking forward to this as well :cheers: I want to see if the MUT can hold it's own as the Signal did in Pietervns challenge thread :tu:
I am thinking you will be fine but by the end of the month you will definitely be able to tell us good or bad about the MUT :like: :like: :like:
I've been getting the itch to start messing with some of my firearms again, so the tool set may be useful for that. The saw will probably not be used at all. The rest should be interesting though!
-
Can't wait to see your thoughts on it through the month :tu:
-
With not having a current challenge that I'm in, I thought I'd give a new challenge a try!
I challenge myself to get through the 30 days with a MUT!
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161202_070025_zpscxr3pilu.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161202_070025_zpscxr3pilu.jpg.html)
:like:
-
G'Day,
Excellent choice for a Challenge. I really like the MUT too.
I have a newer style clip that you are welcome to have, I think there may be more give in it that the Ti one it comes with. I use mine without the clip, Gohard made me an excellent leather sheath.
I include pics of the new style clip and my clipless MUT
Good luck with the challenge, I will be following this one too.
Cheers,
Pete
-
I appreciate the offer, but I think the adjustment I made will work for me. Before it is over, I may make a kydex sheath for horizontal carry, but clipped carry is fine for now.
So far today I've used the bronze scraper to clean out a battery terminal. Didn't get a pic, but I have a shotgun to clean when I get home. I've shot two rounds of sporting clays this morning. Pics to come. :cheers:
-
Day 2:
After shooting game 100+ rounds of 12 gauge with sporting clays this morning, it was time to clean my shotgun. The bronze scraper made great work on the carbon buildup and gunk on parts of the gas system.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161203_131345_zpshhobchak.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161203_131345_zpshhobchak.jpg.html)
-
Good pic :like: :like: :like:
I see the MUT has come in handy already :tu:
-
:like:
-
Day 3:
The tag on my shirt is crinkled up for some reason, so off it comes.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161204_122850_zpsvevgtyg1.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161204_122850_zpsvevgtyg1.jpg.html)
-
Another good pic Aberdrew :like: :like: :like:
-
I'll have a gun pic up tonight. I believe I have a new 1911 trigger sitting in the mail box, so I will use the punch on the MUT to knock out the one pin that requires it. Then I hope I have to fit the trigger. I'm replacing the one in the gun due to a sloppy fit; I'd hate for the new one to have a similar problem.
-
Day 4:
New trigger showed up, so I dismantled one of my 1911s to install it. The original was poorly fit.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161205_163650_zpswgqpjrzm.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161205_163650_zpswgqpjrzm.jpg.html)
I used the bit driver and the flathead bit to remove the grip panels after field-stripping.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161205_163831_zps8djlwifg.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161205_163831_zps8djlwifg.jpg.html)
I used the punch to push out the pin holding the mainspring housing.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161205_164014_zps6296qcyf.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161205_164014_zps6296qcyf.jpg.html)
Got it all apart.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161205_164234_zpsorfxpoqr.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161205_164234_zpsorfxpoqr.jpg.html)
Swapped in the new trigger, which did not require fitting, but did fit better than the factory.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161205_165102_zps11eq5xfx.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161205_165102_zps11eq5xfx.jpg.html)
While I was in the work shop, I took a file to the bit holder because it has been ridiculously difficult to remove bits.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161205_165738_zpsnejeyzij.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161205_165738_zpsnejeyzij.jpg.html)
-
Some nice pictures!!! This is what the MUT is made for!
Interesting point on you having to file the bit driver. I checked both mine and once you press where your thumb is, the bits come out silky smooth.
Cheers,
Pete
-
Some nice pictures!!! This is what the MUT is made for!
Interesting point on you having to file the bit driver. I checked both mine and once you press where your thumb is, the bits come out silky smooth.
Cheers,
Pete
I've tried pushing all around in that area to try to get it to move, but couldn't get help. I was having to push up on the retainer, and it didn't want to move very much at all. Adding the triangular notch did the trick though. They are retained, but slide out pretty easy when I want to remove them.
-
Day 5:
Using the MUT to remove a faceplate so that I can repair a jack.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161206_072305_zps5xppqsmj.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161206_072305_zps5xppqsmj.jpg.html)
-
Great thread and pics to boot :like: Great to see the MUT being used more for what it was specifically designed for as well :tu:
-
Great thread and pics to boot :like: Great to see the MUT being used more for what it was specifically designed for as well :tu:
:hatsoff:
If some parts ever come off back order, there will be some AR-15 work going on as well.
-
Great thread and pics to boot :like: Great to see the MUT being used more for what it was specifically designed for as well :tu:
:hatsoff:
If some parts ever come off back order, there will be some AR-15 work going on as well.
:o
:like:
:popcorn:
-
Good work on carrying the MUT!
I am sure you will find a use for the saw this month...Christmas Tree comes to mind.
-
Good work on carrying the MUT!
I am sure you will find a use for the saw this month...Christmas Tree comes to mind.
Fake tree ;)
-
A little countertop tree would look nice, decorate it with fishing lures
Sent from my XT1563 using Tapatalk
-
Day 6:
Among other tasks, I grabbed this pic while putting a face plate back on.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161207_094614_zpslfso6crw.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161207_094614_zpslfso6crw.jpg.html)
-
Day 6:
Among other tasks, I grabbed this pic while putting a face plate back on.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161207_094614_zpslfso6crw.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161207_094614_zpslfso6crw.jpg.html)
:like: :like:
-
Day 6:
Among other tasks, I grabbed this pic while putting a face plate back on.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161207_094614_zpslfso6crw.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161207_094614_zpslfso6crw.jpg.html)
I like the brick with the grapevine joint in the background as well :dd: :D :like:
-
Day 7:
Used the MUT to cut up this fiber optic jumper to prevent further use. It was broke. The Kevlar strands made it a task worthy of a heavy blade.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161208_082840_zpseqghtuas.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161208_082840_zpseqghtuas.jpg.html)
-
Great pic for the day :like: :like:
-
New page banana man dance
:nanadance: :nanadance:
-
Day 8:
Using the MUT as a screwdriver to hang some plans I made in a telecom room.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161209_083018_zps3huk7mty.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161209_083018_zps3huk7mty.jpg.html)
-
Another great in use pic aberdrew :like: :like:
-
Day 9:
Got a couple packages today that contained books of the photographic history of Harley-Davidson.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161210_234952_zpsxiylkxbp.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161210_234952_zpsxiylkxbp.jpg.html)
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161210_235056_zpsv4buwaq6.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161210_235056_zpsv4buwaq6.jpg.html)
-
Day 9:
Got a couple packages today that contained books of the photographic history of Harley-Davidson.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161210_234952_zpsxiylkxbp.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161210_234952_zpsxiylkxbp.jpg.html)
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161210_235056_zpsv4buwaq6.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161210_235056_zpsv4buwaq6.jpg.html)
:like:
-
Day 9:
Got a couple packages today that contained books of the photographic history of Harley-Davidson.
Those look cool!!!
-
Day 10:
Just hanging out on a Sunday.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161211_094404_zpsxsuomhke.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161211_094404_zpsxsuomhke.jpg.html)
-
Neat looking books :cheers: The weather outside looks nice where you are at as well :dd: :like: :like:
-
Late day 11:
I took this picture early yesterday, but never had time to upload and post.... :facepalm:
Was using the pliers to try to grab a string that was pulled back into the pipe.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161212_085307_zps1eluaz8s.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161212_085307_zps1eluaz8s.jpg.html)
-
Day 12:
Used the blade to put a hole in the cap of a bottle so I could put the bottle on the end of some glow rods to install a pull string in a stretch of basket tray.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161213_072602_zps4lernpis.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161213_072602_zps4lernpis.jpg.html)
-
Day 12:
Used the blade to put a hole in the cap of a bottle so I could put the bottle on the end of some glow rods to install a pull string in a stretch of basket tray.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161213_072602_zps4lernpis.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161213_072602_zps4lernpis.jpg.html)
:like:
-
Great couple of action pics :like: :like:
-
looking good!
-
Day 13:
Using the MUT as a make-shift pry tool to open an access panel on an emergency phone. The gaskets get stiff and stick really well after some time.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161214_080108_zpss7o2exjm.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161214_080108_zpss7o2exjm.jpg.html)
-
Day 13:
Using the MUT as a make-shift pry tool to open an access panel on an emergency phone. The gaskets get stiff and stick really well after some time.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161214_080108_zpss7o2exjm.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161214_080108_zpss7o2exjm.jpg.html)
:like:
-
Day 13:
Using the MUT as a make-shift pry tool to open an access panel on an emergency phone. The gaskets get stiff and stick really well after some time.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161214_080108_zpss7o2exjm.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161214_080108_zpss7o2exjm.jpg.html)
A prime example why it is always a good idea to have a MT to hand :tu: Good improv with the MUT Aberdrew :like: :like:
-
Day 14:
Spent almost all day driving and the rest of the day in a motorcycle museum, so my MUT just chilled on my pack today.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161215_164726_zpsj390dkwp.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161215_164726_zpsj390dkwp.jpg.html)
-
So I guess you had the day off :salute: Thanks for sharing with us and great pic :tu: :like:
-
I took today and tomorrow off to see my Alma Mater play in a bowl game on Saturday. Go App State!
-
Day 15:
The lock is rusted shut, so I cut the cable to make it more manageable. Due to the stranded construction, it took a couple of different bites to get it, but the cutters handled it fine.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161216_094052_zpsfhmkjtdq.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161216_094052_zpsfhmkjtdq.jpg.html)
-
Hope your team wins :tu:
Stranded cable is always hard to cut :ahhh Glad the MUT handled it :tu:
-
Thanks. The game will be on ESPN tomorrow at 5:30 EST.
-
Day 16:
Tailgate day.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161217_152205_zpscb90a6kt.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161217_152205_zpscb90a6kt.jpg.html)
-
Day 17:
Opening mail after getting back in town.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161218_133401_zpsygfackup.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161218_133401_zpsygfackup.jpg.html)
-
Day 18:
Screwing a new faceplate to the wall.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161219_111633_zpsa815m2l4.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161219_111633_zpsa815m2l4.jpg.html)
-
Some great uses Aberdrew :cheers: :cheers: :like:
-
Day 19:
Used a bit from my bit cards to put this box together.
Also used the pliers to loosen a twist lock light on my truck, but didn't manage a pic.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161220_135115_zpsvfn58zfx.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161220_135115_zpsvfn58zfx.jpg.html)
-
Day 19:
Used a bit from my bit cards to put this box together.
Also used the pliers to loosen a twist lock light on my truck, but didn't manage a pic.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161220_135115_zpsvfn58zfx.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161220_135115_zpsvfn58zfx.jpg.html)
Another excellent pic Aberdrew :cheers: :cheers: :like:
-
Day 20:
I was tasked with removing some old anchors from a wall and patching the holes. The MUT was able to pull a couple out and the rest had to be drilled.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161221_090339_zpsskapzjmr.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161221_090339_zpsskapzjmr.jpg.html)
-
Unedited new page Nana dance
:nanadance: :nanadance:
Day 21:
I've used the hammer a couple of times already this month, but this is the first time I've grabbed a pic. Using the MUT to punch out some knockouts.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161222_092651_zpsx47xfdp7.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161222_092651_zpsx47xfdp7.jpg.html)
-
:like: I do wish more MTs had a hammer on the like the one on the MUT :cheers: :cheers: :like:
-
And I'd be afraid that after getting used to having one with a hammer, I'd just start bashing things with all of my tools :facepalm:
-
And I'd be afraid that after getting used to having one with a hammer, I'd just start bashing things with all of my tools :facepalm:
I use my MTs as a light hammer a lot anyway, so having a designated impact zone is nice.
-
And I'd be afraid that after getting used to having one with a hammer, I'd just start bashing things with all of my tools :facepalm:
I use my MTs as a light hammer a lot anyway, so having a designated impact zone is nice.
Seems like the MUT might be a good fit then :tu:
-
I used my Skeletool the other evening to put a thumb tack into some wood using the end opposite the carbiner :D I am not against beating on things with my MTs if need be but try never to try hammer anything more than I think it can handle ;) I would probably like the hammer built into one definitely :dd: :like: :like:
-
Day 22:
Helping my girlfriend wrap presents and I used the bit driver to adjust the tension of the scissors.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161223_143206_zpsvkfpknhs.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161223_143206_zpsvkfpknhs.jpg.html)
-
Day 22:
Helping my girlfriend wrap presents and I used the bit driver to adjust the tension of the scissors.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161223_143206_zpsvkfpknhs.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161223_143206_zpsvkfpknhs.jpg.html)
Good on you for helping her :salute: Almost Christmas :dd: :like: :like:
-
Day 23:
Managed to get a splinter filling my tires with air, so it's time to cut it out.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161224_122620_zpsrhuboimd.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161224_122620_zpsrhuboimd.jpg.html)
-
The surgery was a success. The black sliver on my middle finger is what was removed.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161224_123305_zps0xeoaude.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161224_123305_zps0xeoaude.jpg.html)
-
:like: :cheers:
-
:like: :cheers:
Glad you got the splinter out :like: :like:
-
Day 24:
Opening a present my girlfriend got me.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161225_075242_zpswdypcnfg.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161225_075242_zpswdypcnfg.jpg.html)
-
Nice Aberdrew :like: :like: and Merry Christmas buddy :tu:
-
You never did show us what was in the Battlebox. Did you really think you were going to get away with that??? :pok:
-
Day 25:
Making some dinner.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161226_182456_zpsrmhcvp75.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161226_182456_zpsrmhcvp75.jpg.html)
-
You never did show us what was in the Battlebox. Did you really think you were going to get away with that??? :pok:
I'll grab a pic tomorrow. :oops:
-
Was wondering when you were going to pop in with a pic :D :tu: :like: :like:
-
Day 26:
Opening up a prescription I just got filled.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161227_084834_zpsp1ajldtw.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161227_084834_zpsp1ajldtw.jpg.html)
-
As for the Battlbox, here's the contents and the mission card. I get the Advanced level box.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161227_085004_zpsogfwvsfy.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161227_085004_zpsogfwvsfy.jpg.html)
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161227_085013_zpsovqb3qqq.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161227_085013_zpsovqb3qqq.jpg.html)
-
As for the Battlbox, here's the contents and the mission card. I get the Advanced level box.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161227_085004_zpsogfwvsfy.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161227_085004_zpsogfwvsfy.jpg.html)
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20161227_085013_zpsovqb3qqq.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20161227_085013_zpsovqb3qqq.jpg.html)
Sweet gear :dd: :tu: :like:
-
Day 28:
Needed to open it box that I had taped shut, so out came the blade.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161228_091727_zpsnhypwads.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161228_091727_zpsnhypwads.jpg.html)
The tape was already bunched from using it as a carry handle.
-
Duct tape is definitely one not easy to just open with your hands like that either :tu:
-
Just a note, that was only day 27.....I didn't mean to skip a day.
-
Just a note, that was only day 27.....I didn't mean to skip a day.
I forgot you were a day behind the calendar as well :D
-
Day 28 (for real this time):
Using the hammer to drive a hangar for a new metal sign I got for Christmas.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161229_093521_zpsw8wvbifi.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161229_093521_zpsw8wvbifi.jpg.html)
-
Day 28 (for real this time):
Using the hammer to drive a hangar for a new metal sign I got for Christmas.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161229_093521_zpsw8wvbifi.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161229_093521_zpsw8wvbifi.jpg.html)
Good use and neat sign :like: :like:
-
Day 28 (for real this time):
Using the hammer to drive a hangar for a new metal sign I got for Christmas.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161229_093521_zpsw8wvbifi.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161229_093521_zpsw8wvbifi.jpg.html)
So Much Truth In That!!! :like:
-
Day 29:
Was playing with my neice, and needed to get some Play-doh out of a crevice of a mold.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161230_083525_zpsllzoptha.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161230_083525_zpsllzoptha.jpg.html)
-
Best use yet :D Only one more day to go :o :like: :like:
-
Day 30:
Drinking in the new year.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20161231_175040_zpsogu5ue91.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20161231_175040_zpsogu5ue91.jpg.html)
-
New page....
:nanadance: :nanadance: :nanadance:
-
Happy New Year Buddy :cheers: :cheers: :tu:
I just got the MUT badge set up so you can request at your convenience :like:
-
Great thread buddy and congrats on being the first person to get the new MUT badge :salute: :cheers: :cheers: :like: :like:
-
Great thread buddy and congrats on being the first person to get the new MUT badge :salute: :cheers: :cheers: :like: :like:
Thanks bud. The size of the MUT will be a challenge for some, and some won't like the tool set. But, the construction and ruggedness of the tool is very nice and would serve well for most people if Leatherman would take the chassis and work the tool set over some. I'd like to see Leatherman introduce a new, generic tool instead of the purpose driven tools like the Signal and the MUT.
-
Congrats on the Badge. This will be my next challenge once January - Signal is done.
I agree it is not a tool for every one, but it is by far the Coolest Leatherman made!!!
-
Congrats on your badge , well done :tu: :tu:
-
Congrats :cheers: :cheers: :cheers: :cheers: :cheers: :like:
-
Thanks guys.