GG, the Pocket wrench is a great tool! I keep one handy most of the time.
Out of interest, what is a Pocketwrench I?!
Out of interest, what is a Pocketwrench I?!
Please do. :tu: I've heard of them, and have searched for pics but never found any. I'm also a big fan of the Pocketwrench II. Very useful bit of kit. :salute:
I just found my black chrome vanadium Pocketwrench II. :drool:
I just found my black chrome vanadium Pocketwrench II. :drool:
So, was there ever a Pocketwrench I??? :ahhh
I think it's a marketing thing:
Let's call it PocketWrench II That way everyone thinks its improved. :D ;)
I think it's a marketing thing:
Let's call it PocketWrench II That way everyone thinks its improved. :D ;)
But what if they make a III?
Glad to see that picture, I thought I was going crazy! :D IIRC, they came in stainless and black in the original run but who really knows, it has been years and my memory isn't what it once was. :rofl: I'll keep looking...
Just call me GG123, I'll get a picture tomorrow! :rofl: :rofl: :rofl: :rofl:
That looks like a really useful little tool. How sturdy are the teeth, i.e. how easily do they strip?
That looks like a really useful little tool. How sturdy are the teeth, i.e. how easily do they strip?
They don't strip. :D Usually the bolts are the ones that end up being marred after an encounter with the PW2. ;) It's a very tough tool and it sometimes leaves a mark on the bolts.
The small teeth make it good for both metric and imperial size bolts and it also works well with those LM pivot bolts.
(http://i1255.photobucket.com/albums/hh627/enki_ck/Modification/IMG_20130105_144021.jpg)
Glad to see that picture, I thought I was going crazy! :D IIRC, they came in stainless and black in the original run but who really knows, it has been years and my memory isn't what it once was. :rofl: I'll keep looking...
Just call me GG123, I'll get a picture tomorrow! :rofl: :rofl: :rofl: :rofl:
:rofl: :rofl:
I think it's a marketing thing:
Let's call it PocketWrench II That way everyone thinks its improved. :D ;)
But what if they make a III?
Nice. 8) Where did you find one?
Nice. 8) Where did you find one?
Found it on ebay the other day. :)
Nice. 8) Where did you find one?
Found it on ebay the other day. :)
I've just added a pocketwrench feed to my eBay. Only ones I ever stumble upon on eBay are the TW versions. I'm glad you found one. :2tu:
I really really really need to replace my pw2
one of the best one piece tools I've owned
I really really really need to replace my pw2
one of the best one piece tools I've owned
Did you lose yours?
I really really really need to replace my pw2
one of the best one piece tools I've owned
Did you lose yours?
nope foolishly traded.
I messed up a trade and used it to satisfy my end of the deal. :facepalm:
I really really really need to replace my pw2
one of the best one piece tools I've owned
Did you lose yours?
nope foolishly traded.
I messed up a trade and used it to satisfy my end of the deal. :facepalm:
You missed out on a free shipping deal from LeeValley about a week ago. They have them for $13,50 and have the US version and a couple $ shipping now.
http://www.leevalley.com/US/wood/page.aspx?p=61101&cat=1,43456
I find a chrome vanadium one for 10€ in Europe, my eyes light up, I'm :woohoo: , and then comes the checkout shock. 31€ shipping. :rant:
Wow that is a outrageous shipping charge. :o Did you go ahead and get it?
Family picture time. :D The weather is terrible here so no lighting for better pics so this will have to do for now. I'll try to remember to post better ones though. ;)
(http://i1255.photobucket.com/albums/hh627/enki_ck/Mics/d1f3932e-5cec-4c89-891c-31ba99490cbb_zps36f2e257.jpg)
Family picture time. :D The weather is terrible here so no lighting for better pics so this will have to do for now. I'll try to remember to post better ones though. ;)
http://i1255.photobucket.com/albums/hh627/enki_ck/Mics/d1f3932e-5cec-4c89-891c-31ba99490cbb_zps36f2e257.jpg
Sweet! That Cr-V looks brand new! Nice collection. :tu:
I find a chrome vanadium one for 10€ in Europe, my eyes light up, I'm :woohoo: , and then comes the checkout shock. 31€ shipping. :rant:
Smurf! :rofl:
I find a chrome vanadium one for 10€ in Europe, my eyes light up, I'm :woohoo: , and then comes the checkout shock. 31€ shipping. :rant:
Smurf! :rofl:
Pretty much what happens to us in Europe when we see the "cheap" stuff in USA sites...
:facepalm:
Family picture time. :D The weather is terrible here so no lighting for better pics so this will have to do for now. I'll try to remember to post better ones though. ;)
(http://i1255.photobucket.com/albums/hh627/enki_ck/Mics/d1f3932e-5cec-4c89-891c-31ba99490cbb_zps36f2e257.jpg)
Orginal PocketWrench :)
Orginal PocketWrench :)
(http://forum.multitool.org/keychain-one-piece-tools/new-love-for-the-pocketwrench-ii/?action=dlattach;attach=88842;image)
Where did you find it? That's got to be a rarity!
Where did you find it? That's got to be a rarity!
How about this clone? Anyone have this? How does it compare?
http://www.aliexpress.com...-EDC-Gear/1477120516.html (http://www.aliexpress.com/item/Pocket-Wrench-with-Scale-Stainless-Steel-Multi-functional-EDC-Gear/1477120516.html)
How about this clone? Anyone have this? How does it compare?
http://www.aliexpress.com...-EDC-Gear/1477120516.html (http://www.aliexpress.com/item/Pocket-Wrench-with-Scale-Stainless-Steel-Multi-functional-EDC-Gear/1477120516.html)
It's kinda funny how they use the 'in use' picks of the real PWII... :facepalm:
How about this clone? Anyone have this? How does it compare?
http://www.aliexpress.com...-EDC-Gear/1477120516.html (http://www.aliexpress.com/item/Pocket-Wrench-with-Scale-Stainless-Steel-Multi-functional-EDC-Gear/1477120516.html)
It's kinda funny how they use the 'in use' picks of the real PWII... :facepalm:
Where did you find it? That's got to be a rarity!
Mr. W, I found it on ebay. It is the only one I've ever seen other than a pic of Stromdranes.
enki_ck here is a family pic for you.
HEHEHEHEHE That's a good one.
Look at their drawing. Assuming everything is scale, it's going to be a lot thinner than a true PocketWrench. Probably softer, to.
HEHEHEHEHE That's a good one.
Look at their drawing. Assuming everything is scale, it's going to be a lot thinner than a true PocketWrench. Probably softer, to.
I somewhat doubt that.. Stainless Steel is kind of hard to mess up and the thickness in the pictures looks the same.
It's pretty much what happens when things get outsourced in China, they show up much cheaper but exactly the same as their much more expensive "real" thing. All that extra $ you spent on the tools is all marketing :facepalm: and keep in mind, even for 6$ each they're still making a profit on it! So the real costs of making this thing are probably around 3$ meaning that on each pocketwrench a whopping 16$ profit is made.
Sometimes when a tool has been around for awhile it gets cast away for the latest new gadget. I've owned a Pocketwrench and Pocketwrench II for a long time now. I usually have one in with my multitool sheath as an extra edc tool. I also carry one in my bicycle tool bag and I have a few floating around in my shop.
I've been carrying the Pocketwrench II lately and I've found new love for this great tool. Not only is it handy, but it is strong enough to do just about any task that you throw at it. Made of 420 stainless steel it is a tough little bugger. :tu:
I'm going to be ordering 5 more pretty soon. At $10 each, that is really hard to beat!
http://www.pocketwrenchtool.com/
Note: I'm not affiliated with Burktec in any way, I just love their Pocketwrench II.
How? The real one is $10,50 :shrug:Shrug, just did a google search, none of the first hits go as low as $15, my first three hits at google: 20$ (http://www.pocketwrenchtool.com/), 20 pound (http://www.rutlands.co.uk/sp+woodworking-hand-tools-screwdrivers-pocket-wrench-pocket-wrench-pocketwrench+dk7112), 22 dollar (http://www.amazon.com/Burketek-Pocket-Wrench-II-Set/dp/B0089SI412). Anyway, it's not really the point I was making, which was that it wasn't a fake and that tools mass produced in China are being sold for way too much.
Correction $14.95 :-\ Seems they went up since last year but still no $16 profit to be made. (Free shipping from Lee Valley currently too)
Latshaw Pocketwrench II USA & TW
Latshaw Pocketwrench II USA & TW
Thanks for the pic. :cheers:
So how many versions of it are there, the five (PW 1, SS, CV, Latshaw US and TW) or are there any more? ANd do you know the chronology of production, from when till when each one was made?
Latshaw Pocketwrench II USA & TW
Thanks for the pic. :cheers:
So how many versions of it are there, the five (PW 1, SS, CV, Latshaw US and TW) or are there any more? ANd do you know the chronology of production, from when till when each one was made?
There is also a Latshaw PWII in CV there is a pic of one in this thread (http://forum.multitool.org/index.php?topic=16106.0). There is also a PWII marked Mcfeely's which is a hardware type Co. Proably a advertisment thing. I do not know the chronology of their production. As it stands at the moment there are two PWII's that I do not have yet. :)
Latshaw Pocketwrench II USA & TW
Thanks for the pic. :cheers:
So how many versions of it are there, the five (PW 1, SS, CV, Latshaw US and TW) or are there any more? ANd do you know the chronology of production, from when till when each one was made?
There is also a Latshaw PWII in CV there is a pic of one in this thread (http://forum.multitool.org/index.php?topic=16106.0). There is also a PWII marked Mcfeely's which is a hardware type Co. Proably a advertisment thing. I do not know the chronology of their production. As it stands at the moment there are two PWII's that I do not have yet. :)
I'm asking cause there are some plans to rejuvinate the multitool wiki and I'd maybe add a OPMT section, so an article abotu the PW IIs would be a must. :D
Loving my Pocketwrench II. Been carrying and using it for just over a week now. Love the form factor and it's quite functional to boot! Slips nicely into the belt pouch with my other MT accessories. Loved it so much, that I bought a backup just in case :tu:.
I really need to get one of these again.
I used my old one to pay off a debt.
it just may be the best one piece tool I have Used
Thanks to the help of Nikola I was able to aquire this McFreely's Pocketwrench II. Thank you Nikola for you generous help. :salute: I might add the teeth are the more rounded type of the earlier Pocketwrench II's. :)
(http://forum.multitool.org/index.php?action=dlattach;topic=45219.0;attach=119771;image)
Going to get one to try out.great
Is there a reason to go with a pocket wrench 2 vs the pocket wrench 3?
Pocket wrench 2 ownersGet piranha 2 :)
I want to highly recommended Chapman bits for your pw2
http://www.chapmanmfg.com/AboutChapmanTools.html#anchor_274
They stay in place and won't fall out.
scroll down the page to learn about the bits :)
Is there a reason to go with a pocket wrench 2 vs the pocket wrench 3?
Yes the reason to go with the PWII is because the PWIII doesn't exist yet. At least that I'm aware of at the moment. :D
Is there a reason to go with a pocket wrench 2 vs the pocket wrench 3?
Yes the reason to go with the PWII is because the PWIII doesn't exist yet. At least that I'm aware of at the moment. :D
Unless you count the PW Slim (http://forum.multitool.org/index.php/topic,39691.0), but that's more of a MTO special. ;)
Is there a reason to go with a pocket wrench 2 vs the pocket wrench 3?
Yes the reason to go with the PWII is because the PWIII doesn't exist yet. At least that I'm aware of at the moment. :D
Unless you count the PW Slim (http://forum.multitool.org/index.php/topic,39691.0), but that's more of a MTO special. ;)
How did that mod hold up in the long run? :think:
Pocket wrench 2 owners
I want to highly recommended Chapman bits for your pw2
http://www.chapmanmfg.com/AboutChapmanTools.html#anchor_274
They stay in place and won't fall out.
scroll down the page to learn about the bits :)
Never seen the tubular one. :tu:Is there a reason to go with a pocket wrench 2 vs the pocket wrench 3?
Yes the reason to go with the PWII is because the PWIII doesn't exist yet. At least that I'm aware of at the moment. :D
Unless you count the PW Slim (http://forum.multitool.org/index.php/topic,39691.0), but that's more of a MTO special. ;)
How did that mod hold up in the long run? :think:
Don't know, never did it. Maybe a bump of that thread might get you answers from the guys who did. I think Sparky still carries his.
^^^ :salute:
I use mine for light prying, scraping and nut tightening and had no problems so far :tu:
I could not resist any longer, bought one, testing today. :tu:
I could not resist any longer, bought one, testing today. :tu:
I have a feeling it might bump the Croc from your EDC. :D
I've always had trouble keeping the bit in place in my PW and my Croc.
I've always had trouble keeping the bit in place in my PW and my Croc.
Special bits are available for the PWII with stops and ball detents to hold them in place. They are on the expensive side though.
This thread is one year old today. Here is a new pic of the different pocketwrenches over time
(http://forum.multitool.org/index.php?action=dlattach;topic=45219.0;attach=123492;image)
This thread is one year old today. Here is a new pic of the different pocketwrenches over time
(http://forum.multitool.org/index.php?action=dlattach;topic=45219.0;attach=123492;image)
Great looking line up. :dd:
Didn't realize until now that the McFeely's was stamped upside down. Both the text and the teeth of the wrench. Strange. :think:
Thank you enki_ck and Mr W. The McFreely stamping and teeth are backwards or reversed to the others. It also has different style lettering.
Parnass that might be a good mod. I've thought of several different types of mods but cant seem to make a decision as what I really want to do yet. :)
Thank you enki_ck and Mr W. The McFreely stamping and teeth are backwards or reversed to the others. It also has different style lettering.
Parnass that might be a good mod. I've thought of several different types of mods but cant seem to make a decision as what I really want to do yet. :)
Thank you enki_ck and Mr W. The McFreely stamping and teeth are backwards or reversed to the others. It also has different style lettering.
Parnass that might be a good mod. I've thought of several different types of mods but cant seem to make a decision as what I really want to do yet. :)
Order cheap knockoffs from the dealextreme and do them all! Then find the ones you like and do them on the real thing... :D
Would this help?
http://forum.multitool.org/index.php?topic=53099.0
I admit to owning several of the real deal and none of the knockoffs for comparison. If it were me, though, I would wait the extra month or two or however long it takes to save up the funds for the original. Just my $0.02 though.+1
I ordered one of the cheap clones to try out. Lets keep that to ourselves, okay?
I ordered one of the cheap clones to try out. Lets keep that to ourselves, okay?
Nice. :tu:
The SS one is still my favorite one to use. :D
Little bit of black chrome vandium
Little bit of black chrome vandium
Did you buy all the stock from a store? :D
New group shot :)
New group shot :)
That is such a great collection! Love it.
Just picked up mu PWII and have already put it to good use repairing a few metering pumps. Not sure how I lived w/o it.
Thanks David :hatsoff: You have been probably the biggest enabler in me wanting one of these over the years :pok: :D
I do thank you for that though ;) :cheers:
A nice :bump: for this awesome thread! :woohoo:
I was finally able to track one of these (well 2 actually :whistle: ) and here is a pic of the one I have been carrying :woohoo:
(https://i.imgur.com/CMJQKR2h.jpg)
Really love this thing as much as I thought I would and after seeing all the versions, I would love to track down more but as I have been searching for years for these it isn't likely :ahhh :facepalm:
Did you buy all the stock from a store? :D
I've been slowly snagging them off ebay one here one there for around the last year and a half. I'm certain there is a hardware store or two somewhere with old stock gathering dust. :D
David is a nice, friendly guy... and an unabashed enabler :D
:like: Heck of a testimony.
4 PocketWrench II's for sale on eBay from Germany. Seller is unable to ship outside of EU (including Norway..) if anyone is interested. Only $12 each :)
Excellent find :salute:
Either Burktek or Latshaw is my guess, but I believe David is more knowledgeable on this subject than I am.
:like:
Good score Matt! :tu: Looks like a Latshaw to me.
Here's one I've had for a while. But never got a pic up of it.
Thanks David :hatsoff:
Do you know a bit more about the origin of the PW/PW II ? Burktek invented it then Latshaw took over etc.? :think:
:o ...super teaser :P
Here's one I've had for a while. But never got a pic up of it.
Here's one I've had for a while. But never got a pic up of it.
Self locking? Did you open it?
Good question? :ahhh :think: Its partially open the tool will slide out but havent had the bits out. I'll have to check after while and see. :D
Self locking? Did you open it?
While searching for the PW II, I came across this photo.I don't know if it is the Latshaw PW II or the EDCGear copy. But I do find it interesting that a SnapOn branded PW exists.
(https://i.imgur.com/9HOLoVj.jpg)
Edit:
I looked again and saw a second photo. It appears it is a genuine PW II:
(https://i.imgur.com/B74Bov9.jpg)
Something shiny came in the mail today :D
(https://i.imgur.com/d6nZGKt.jpg)
Looks a little strange naked. Good catch. :like:
Good scores! :tu:
Something shiny came in the mail today :D
(https://i.imgur.com/d6nZGKt.jpg)
A massive shout-out to McStitchy :salute: :hatsoff:
[ This attachment cannot be displayed inline in 'Print Page' view ]
:D
(https://i.imgur.com/Qfst8o3.jpg)
I also found a tool from Japan (made in Taiwan) that looks lime a cross between the PW and the Piranha:
(https://i.imgur.com/bgKOJTJ.jpg)
Awesome collection, Adam :o
Nice collection indeed :like:
That packaging and the clearance sticker is interesting. Were the 1.99$ originally?
Did no-one want to buy them? :dunno:
What's the story about the Pocket Wrench trad° ?
Is it any good? :pok:
Oh, and you need a stainless USA Latshaw still ?
This is where you suffer the consequences of not sharing your brownies with me :td:
I know the forum has done limited runs of some multis from various companies. Does anyone have contacts anywhere that might be able to crank out some PWs (or PW-esque tools) for us? From my laymen's perspective, they're awfully simple. OTOH, they're pretty popular in some of the other EDC groups I'm in, so there might be a market for someone to bring them back for more general production if given a nudge?Would have to investigate who (if anyone) holds the patent on them today.
I've been lucky to get some new Black Chrome Vanadium PWs :woohoo:Good score!
Just took some quick pics...
(https://i.imgur.com/h0IOMCv.jpg)
(https://i.imgur.com/FIjPAMq.jpg)
The machining appears to be finer than on the Stainless version I have.
:hatsoff: ...what's everyones experience about the yellow paintings on the imprints? Do they hold up well?My daily carry is the stainless version, but I think Poncho’s has seen pretty heavy use and the yellow markings still look OK in the pic above. Perhaps he’ll be along to comment.
Even if not, it will not hold me back from using it though :)
This is where you suffer the consequences of not sharing your brownies with me :td:
some new Black Chrome Vanadium PWs.
I am wondering if the chrome vanadium versions are any tougher. I went with CV/tool steel because that was my opinion (and you could still find the stainless ones easily at the time).
I've been lucky to get some new Black Chrome Vanadium PWs :woohoo:
Just took some quick pics...
(https://i.imgur.com/h0IOMCv.jpg)
(https://i.imgur.com/FIjPAMq.jpg)
The machining appears to be finer than on the Stainless version I have.
:iagree: :like:
As soon as the Skeletool challenge is done, the PW2 will pair nicely with my ST300 :dd:
[ This attachment cannot be displayed inline in 'Print Page' view ]
:iagree: :like:
As soon as the Skeletool challenge is done, the PW2 will pair nicely with my ST300 :dd:
[ This attachment cannot be displayed inline in 'Print Page' view ]
I've been lucky to get some new Black Chrome Vanadium PWs :woohoo:
Just took some quick pics...
(https://i.imgur.com/h0IOMCv.jpg)
(https://i.imgur.com/FIjPAMq.jpg)
The machining appears to be finer than on the Stainless version I have.
Ok fellows, where are y'all finding these?I’d recommend keeping an eye on the ‘bay. They pop up there from time to time lightly used or even new for reasonable prices.
I've got my share of OPTs over the years but this one looks totally different and useable.
Just found this thread, thanks for telling me about it everyone ::) :pok:
I figured that you knew how to navigate the forum :pok:
:D
:iagree: ??? :dunno: :whistle: :D
As I’ve carried a PW for so long, but they are discontinued, I thought it prudent to grab a few backups when the opportunities arose.
Note the top one is an original PW. The addition of the rulers on the PWII was a definite upgrade. Sadly, this example isn’t in great shape; the spots and discoloration appear to be rust.
The second from top looks to have seen by far the heaviest use of the four CV tools. The yellow appears faded, not as bright as the newer looking ones, but still perfectly clear and legible.
I've now able to join the elite club of PWII owners thanks to the generosity of McStitchy, who messaged me after I had wanted to know where to find one.
It showed up here on this side of the Atlantic on Saturday and it's first use was tightening up a nut on my wheelchair.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Don't know how I'm gonna repay this kindness, but for now, my humble thanks and appreciation.
I now have two of them. Adam sent me the first, and the second was sent by McStitchy. :hatsoff: to both!
[ This attachment cannot be displayed inline in 'Print Page' view ]
:iagree: :like:
...so the delivery truck did actually leave a mark on the Stainless one :o
(https://i.imgur.com/kocIJfuh.jpg)
In my work carry always 8)
(https://i.imgur.com/oDOp4KHh.jpg)
Still being an excellent edition to my carry :salute: :like:
(https://i.imgur.com/8BpwW5Gh.jpg)
Still being an excellent edition to my carry :salute: :like:
(https://i.imgur.com/8BpwW5Gh.jpg)
:woohoo:
(https://i.imgur.com/cAZCuluh.jpg)
Gear pic, Adam :like: Hope the lifeguard duty is going well :tu:
These photos are so sweet! Bring it back! It must return! :like:
The PWII and I are on lifeguard duty today in the backyard:
(https://i.imgur.com/4NyVgnv.jpg)
Tell me more about that neat looking utility knife that I have never seen before :dd::iagree: What is that? Even the blade looks great.
(https://i.imgur.com/GBdBn3Nh.jpg)
Excellent combo's, Poncho and Stitchy :drool:
[ This attachment cannot be displayed inline in 'Print Page' view ]
The non BO chrome vanadium PWII today :D
(https://i.imgur.com/aJFeVm5h.jpg)
Splendid carry, Poncho :like:
(https://forum.multitool.org/index.php?action=dlattach;topic=59661.0;attach=553804;image)
Woah, nice old school carry! :like:Thank you, sir :hatsoff:
Splendid carry, Poncho :like:
(https://forum.multitool.org/index.php?action=dlattach;topic=59661.0;attach=553804;image)
Woah, nice old school carry! :like:
(https://i.imgur.com/mKQzagX.jpg)
(https://i.imgur.com/jmsvDR5h.jpg)
(https://i.imgur.com/KykgIje.jpg)
(https://i.imgur.com/TsudRPHh.jpg)
I’d probably go for something with some more tools vs the two
It does also have a hex for bits ;)That screwdriver looks awesome!
(https://i.imgur.com/Z1wCp8Eh.jpg)
It has 4-5 functions by my count:Yeah it has a couple more, but the Mrs bought me something diff this morning that will be going on the keychain, unfortunately it’s not a pocketwrench,,
- Wrench
- Ruler
- Hex bit driver
- Prybar/flat screwdriver
They turn up on ebay from time to time.This.
What about either a Gerber shard, or a niteize DoohicKey?The Shard is a neat little tool. I don't carry mine enough. The Gerber Mullet is awlso worth considering; it's a tiny bit bigger and has a few more functions. The DoohicKey... :dunno: You might be able to find one at Home Depot, though.
That screwdriver looks awesome!
JR
They turn up on ebay from time to time.
My favorite screwdriver :tu: :like:
:iagree: but it can be a pretty slim chance to find one sometimes :ahhh
You mean the screwdriver? :think:
It is a Leatherman Ratchet Driver with a Zapwizard micro screwdriver handle. It slips over the Ratchet driver and this one holds the LM flat bits. Just search Zapwizard and he has a site :cheers: he is a member here at MTO (you can probably get to his site from his signature line link here as well) but he hasn't been active in a while :salute: the price isn't exactly cheap but when I ordered mine they were cheaper :whistle: :ahhh
He 3D prints several different things besides the screwdriver handles, he also prints different sheaths and other accessories for LM :tu:
(https://i.imgur.com/jpE6f32h.jpg)
8) pic! :tu::iagree: :like:
The Doohickey is a fine OPT and readily available still :salute:I haven’t even unwrapped it, it’s still sitting on the desk, it’s just been such a very crazy week at home, heck half the time I don’t even know what day it is..
I had looked for years for the PWII and finally scored one (now 2 different types) and really just love the feel of it :tu:
I believe you will like the Doohickey just fine for an edc, MadP :salute:
I picked up my PW2 very early on and carried one daily. I stopped for some reason as we tend to do. Glad I had it thats for sure. Its a versatile tool and being flat it is fairly easy to carry. A little heavy but the utility is there.Lucky,,
Back with the regular chrome vanadium version today :woohoo::drool: :like:
(https://i.imgur.com/WsE0JSth.jpg)
Here is a little kit I put together for at home use. My PW2 was the perfect tool and my main tool I added before the Micra and EAB. So far its been great and worth the carry.
Has anyone used it with bits? I tried it just to see how it works but not actually used it.
How about a little love for the OG PW?:drool: :like:
(https://i.imgur.com/nkSnO1R.jpg)
Here is a little kit I put together for at home use. My PW2 was the perfect tool and my main tool I added before the Micra and EAB. So far its been great and worth the carry.
Has anyone used it with bits? I tried it just to see how it works but not actually used it.
Aloha, what flashlight is that?
4/7s Preon P0 stainless steel. I got this one and a Ti A0 I think its called in red led.
How about a little love for the OG PW?
(https://i.imgur.com/nkSnO1R.jpg)
Nice combo Nakken :2tu:Thanks mate :cheers:
Still running my at home kit.:like:
How about a little love for the OG PW?
(https://i.imgur.com/nkSnO1R.jpg)
Switched up again :woohoo:
(https://i.imgur.com/TbV4X87h.jpg)
Thanks Poncho :cheers:
(https://i.imgur.com/5sloben.jpg)
Still running my at home kit.
Great pictures and carries, Adam and Poncho :D
[ This attachment cannot be displayed inline in 'Print Page' view ]
Such crisp carry. :drool:Thanks mate :cheers:
Great pictures and carries, Adam and Poncho :D
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice :tu: Not much you can't handle there :salute: ;):iagree: :hatsoff:
:-\ ... what about a second one on your keys or in your wallet?Mine is always in my wallet.
(https://i.imgur.com/WnForf3h.jpg)
That bit driver looks great! It seems to hold regular bits, not the thin Leatherman ones. Does it handle both sizes?
:think: :think:
They are 4 inches in length, 1 inch in width and 1/8 of an inch thick :salute:
I do hope you can make something similar :woohoo: :like:
:popcorn: :like:
8)
(https://i.imgur.com/oLyAXIIh.jpg)
Idk if it’s true but I think I might have found a site that is selling them, I just don’t know..
JR
AliExpress has one listed as a choice of design, but they never have them in stock.:dunno:
Post a link MP.
I now have stainless one to go with my CV ones :woohoo:
(https://i.imgur.com/8wwAzv9h.jpg)
Idk if it’s true but I think I might have found a site that is selling them, I just don’t know..
JR
Were you looking for one MadP? Or just helping locate them?Kinda both, I was kinda interested in them and to join the group but I found one of these for dirt cheap so I convinced the Mrs to get me one when she ordered a few things off of Amazon,, :whistle:
Kinda both, I was kinda interested in them and to join the group but I found one of these for dirt cheap so I convinced the Mrs to get me one when she ordered a few things off of Amazon,, :whistle:
JR
The best version of the Doohickey line, by far.And I did my research!
I picked up a PW2 to go along with my Original PW so I suppose I have a collection now. :D
Here they are next to a Recruit I rehabbed.
[ This attachment cannot be displayed inline in 'Print Page' view ]
That is awesome :woohoo: I need to find an original PW :ahhh :drool: :like:
When you get around to buying an ARC buy 2 of them and we can make a deal for my OG PW :2tu:
Picked up another, this time in black oxide. Shows a bit of wear but I'll use it so I don't mind.
where are you finding all of these?Not sure where he got that one, but they do pop up on the ‘bay from time to time.
Not sure where he got that one, but they do pop up on the ‘bay from time to time.
where are you finding all of these?
Impressive kit HF :like:Thanks McS.
Awesome pics and kit, Heywood :woohoo: :like: :like::cheers:
Still love the PWII but haven't been out as much lately to need one :ahhh hopefully March and onward will be better :woohoo:
I was tickled to get my mitts on this Latshaw CV PWII still in its original packaging…
:cheers: fellas
I thought some might enjoy this. It is the original instructions that came with one of the first PWIIs I ever bought: Brand new Burktek versions around 2008 - 2010.