Multitool.org Forum
Tool Talk => Leatherman Tools => Topic started by: G-Dizzle on December 05, 2016, 06:43:16 AM
-
I have never owned a Skeletool. I have never even handled one, but I would like to post my thoughts on them and see what the general opinion is on them all in one thread. I assume that I have probably doomed myself into buying one now that I have opened this can of worms, but I feel like it could be a good discussion. Again, I DO NOT own a skeletool, so this is not truly an informed review or anything of that nature. I have just been thinking about getting one and I thought some may enjoy reading and commenting on/creating a discussion out of my thoughts on the tool. :cheers: My apologies in advance for my lack of editing grammar before posting! :rofl:
Topic #1: Weight
It seems to me that a couple oz. for a whole lot of tools is not a huge price to pay. The Skeletool is 3.5 oz less than the wave, and the tool difference is a whopping 10! When the Skeletool is compared to the Signal, there is a weight difference of 2.5 oz. and theoretically a tool difference of 12, although there is a debate about the true usefulness of some of the Signal's attachments. Now, I know that for the minimalist, a couple of oz. can mean everything between whether you would carry a tool or not, but is it really weight that determines that, or carry-ability??
Topic #2: Carry-ability
For me, the Signal is a whole heck of a lot easier to pocket carry than the Wave. I know that you can put a pocket clip on a wave (I have one on mine) but the signal just fits. The lock that keeps the handles from flipping open should also be on all Leathermans in my opinion. It is genius! It even lets you carry it clipped outside of your pocket or waistband with no problem!. When I pocket carry the Wave, it is just awkward and opens up in my pocket. The clip normally is used to clip it to the pocket in a bag. I can only assume that the Skeletool wins out in this category because it seems that the slimmer the tool is, the better, but it does lack that lock that the signal has, so who knows? And what you sacrifice for ease of carry could hurt you if you are surprised by some job that needs to be done.
Topic #3: The Trade-off
What you gain in ease of carry you could lose in functionality. Just an example of this is the difference in number of tools mentioned earlier, or the lack of separate blades for separate purposes, or the fact that the bit driver on the Wave is a whole lot easier to use on the Wave than it is on the signal, and I presume the Skeletool. I think this section is very personal and dependent upon each persons every day needs. The big question for me is: "Is the difference is weight/carry-ability really worth it even though I do not use the tools that are not included on the skeletool too often? What happens when I am hit by that surprise job where I will need my Wave, Charge, Signal, etc when all I have is a Skeletool?" I get hit with those fairly frequently.
My Conclusion:
Currently, If I was to carry a Skeletool, I would (most likely) have a back up close by, whether it is in the truck, bedroom, desk, bag, etc. I already keep a heavy duty MT in a backup spot pretty religiously, so it would really not be a problem. For example, if I am only carrying a SAK for my multitool of the day, you can rest assured that there is some plier based multitool somewhere nearby whether it is in the truck, office, bag, etc.. When I look at it that way, carrying a Skeletool is similar to carrying a SAK with me. Minus the scissors. I could go on and on, but I will end up throwing myself into a downward spiral of over comparison. I hope that this was an enjoyable read for everyone! Please let me know what your opinion is on this topic! Like I said, I don't own a Skeletool, nor have I ever handled one. These are just my thoughts in hopes of starting a discussion.
:cheers: :salute:
-
I think you are over thinking it. Just get one and give it a try. The best way to see if a tool is worth carrying is to carry it. Personally the skeletool is my least carried mt. However in some situations it is perfect and is one of my most used mts.
Sent from my Z988 using Tapatalk
-
I think you are over thinking it. Just get one and give it a try. The best way to see if a tool is worth carrying is to carry it. Personally the skeletool is my least carried mt. However in some situations it is perfect and is one of my most used mts.
Sent from my Z988 using Tapatalk
I have no doubt that I'm over thinking it, I just was thinking that I, and others may benefit from/enjoy a discussion about the pro's and con's of it. I'm bound to get one eventually whatever the opinion is on it, but it was nice to write my thoughts out. In other words, I am deliberately over-thinking it. :rofl: Thanks for the response! :cheers:
-
There are a few things I do not really care for about the skeletool. But I think it has the bare bones essentials that would be surprising sufficient in most conditions; pliers, cutters, blade and the Phillips/flat drivers... :-\
-
If you are coming from knife mostly carry then the Skeletool certainly is a lot more tool. If you already carried a knife and SAK then the Skeletool is a good carry option instead of the knife while still carrying the SAK.
If you are thinking of carrying the Skeletool over a more feature rich MT then, you'll need to decide the right time to carry it. The other option is having a feature rich SAK as well.
Get one and carry it when you know you have a slow day. Maybe start by carrying it at home where you have access to other tools.
-
It does feel lighter, despite the numbers, and more importantly, it's slimmer. I can forget I have it on me. But I think you nailed it by calling it personal. I don't run into many surprise situations where I need a saw or serrated blade. Combined with a scissor-equipped SAK, this handles my most common daily tasks, and I can leave the bigger tools in the car or in a backpack.
But that wouldn't work for everyone. I would say it's still worth a try for you though, maybe keeping your backups nearby as a safety net. If you hate it, it shouldn't be too hard to sell on here. :tu:
-
When I carry my Skeletool or Skeletool CX, I am basically carrying a knife that happens to have a few tools. If I think I will really need to work on anything, the Skeletool stays in the drawer.
Sent from my Nexus 6 using Tapatalk
-
I think it depends on how you use and need the tools. The skeletool is perfect to me with a 58mm SAK for scissors and small blades.
I am an urban guy living in a city apartment and working in office. I don't drive and I don't have a backyard/garden. I barely need a saw and use a file on the go or at work. I will need then but usually when I am at home. My most used tools are knife and pliers while the skeletool could fit that purpose well with a cap lifter and a bit holder added.
Mine is a skeletool cx, it has a nice and study blade but not too aggressive (long) which scares people when you pull it out. (The knife is short, but thick) It serve an ordinary day well. It's true that it lacks can opener, file, saw... etc but when you don't need them, they are extra weight instead of versatility.
The bit driver on skeletool is easy to use. All you need to do is to spread the legs. You don't even need to pull it out.
If I am going for camping or travel, I probably won't simply bring the skeley but for an ordinary day of mine, it serves. If you may need those tools it lacks regularly, it maybe not be the one for you.
I owned it for a few weeks only and still in honey moon with it. My opinion may not be objective...
-
Just PM me your address.
-
I am the biggest Skeletool fan around here.
Tool set.
The Skeletool has the tools people normally would use, nothing more.
Sure, I EDC A Spirit or a Wave, but as a normal guy I never use the file nor saw nor serrated blade, sometime I use the scissors because I choose to, not have to.
Tool count=7, but that didn't include the four size/type driver Skeletool is equipped by default.
Feel, the Skeletool just feel good in hand, especially in knife mode comparing to other blocky MT.
Look, it just look so cool.
Tip, team Skeletool up with a Micra then you are good to go.
Fact, Skeletool is the most popular carried MT along Leatherman employees.
-
Just PM me your address.
I responded to your PM. Thank you so much again!!
-
I am the biggest Skeletool fan around here.
Tool set.
The Skeletool has the tools people normally would use, nothing more.
Sure, I EDC A Spirit or a Wave, but as a normal guy I never use the file nor saw nor serrated blade, sometime I use the scissors because I choose to, not have to.
Tool count=7, but that didn't include the four size/type driver Skeletool is equipped by default.
Feel, the Skeletool just feel good in hand, especially in knife mode comparing to other blocky MT.
Look, it just look so cool.
Tip, team Skeletool up with a Micra then you are good to go.
Fact, Skeletool is the most popular carried MT along Leatherman employees.
I didnt know that fact about the Leatherman employees! Thats pretty interesting! Thanks for your thoughts as well and good idea about the Micra!!
-
Skeletool is not a survivalist nor tradesman's pocket toolbox, it is a white collar's multitool. ;)
-
Skeletool is not a survivalist nor tradesman's pocket toolbox, it is a white collar's multitool. ;)
There is definitely some truth to that! I work in an office so it makes a lot of sense to carry one there instead of a bigger tool
-
Skeletool is not a survivalist nor tradesman's pocket toolbox, it is a white collar's multitool. ;)
Yeah. That's very true and fit all the need for an ordinary day in an office.
-
Skeletool with a Micra and a bit card will do most anything you need to do.
When I carry my Skeletool, the Skele goes inside my front right pocket, Micra goes in my watch pocket, and two bit cards go in my front left pocket.
I always carry the Micra, and I carry the bit cards anytime I carry a tool with the bit holder.
-
Another SKeletool fan here :cheers: I have had one for almost 8 years now :o It doesn't fit with what I carry for work EDC but the Skeley is an awesome weekend or night carry for me :tu: Just yesterday (Skeletool Sunday :) ) I used it to take a battery door off a toy my little girl had that she wanted batteries in :cheers: She came straight to me and said "daddy use your LM and put some batteries in this for me " :D It has a great knife, in fact it is my favorite knife among all the LM I have :dd: Mind you I have a PE blade in mine and have no idea about the combo blade in them now though :salute: Great tool though and if I had a different job I might consider carrying it :like:
-
I was disappointed with mine. Had to get one while at special at Home Depot.
What I found it is the same plier head as my Freestyle, slightly long combo blade with screw driver bit(s)
With a bottle opener.
I tried carrying for 3 days but just not grow any love.
Maybe a weekend carry? I just have to work at it.
Sent from my iPhone using Tapatalk
-
There are many multitools for many needs.
The skeletool is an outstanding tool.
I require more functions so I carry a wave or charge or mp600 :)
-
The Skeletool is lightweight, and offers a decent amount of function for it's size and weight. The duty level of the pliers is conducive to it's size, and the knife is well proportioned to the size of the tool.
I hate it.
My dislike is purely ergonomic, and that can only be appreciated (positively or negatively) once you start to use one. The pliers handles, the driver only usable when extended, and the carabiner on the handle, all mean that FOR ME the tool is horrible to use. It may be a "white collar" tool in some parts of the world, but certainly not in others. However, I would not want the Skeletool to be part of my tool array no matter what environment I was working in.
The Skele is a very polarising tool, and it will either feel comfortable, or it won't. Simple as that. For some it's perfect, but I personally dislike using ever single function that it offers, and IN USE (putting aside the theoretically positive aspects I started this post with) I find the tool to have no endearing qualities whatsoever.
I recommend everyone to try before you buy with this tool :cheers:
-
I suggest you look at what we done with our Skeletools.
http://forum.multitool.org/index.php/topic,55539.0.html
(http://forum.multitool.org/index.php?action=dlattach;topic=49951.0;attach=133247;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=55539.0;attach=133251;image)
-
I suggest you look at what we done with our Skeletools.
http://forum.multitool.org/index.php/topic,55539.0.html
(http://forum.multitool.org/index.php?action=dlattach;topic=49951.0;attach=133247;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=55539.0;attach=133251;image)
Cool pic and thanks for the link :tu: I will give that thread a good read sometime :cheers:
-
I suggest you look at what we done with our Skeletools.
http://forum.multitool.org/index.php/topic,55539.0.html
(http://forum.multitool.org/index.php?action=dlattach;topic=49951.0;attach=133247;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=55539.0;attach=133251;image)
Cool pic and thanks for the link :tu: I will give that thread a good read sometime :cheers:
As will I! Very cool pic
-
I am really enjoying reading everyones thoughts on the tool and am super excited to try it out for myself thanks entirely to Kampfer's generosity!
-
All you need to do is to spread the legs. You don't even need to pull it out.
I think that should be in all of the Skeletool advertisements.
-
I just bought mine at Home Depot as a Black Friday special. I wouldn't have one if it weren't for the sale price ($29.88) so if you're getting one, now is the time. You need to think of it not so much as a multitool, but as an every day carry, one hand opening, pocket knife that just happens to also have light duty pliers and some screw driver bits attached to it. If you're more likely to need a pocket knife and may only need the pliers on rare occasions then it is a good option.
I have a friend who is a school teacher so he's not supposed to have a knife on him at all when he's on campus. He carries the skeletool because it is discreet, and if anyone sees it he says its folding pliers that he keeps for fixing his motorcycle and they accept that because he rides a motorcycle every day. Because he does ride everyday, and has occasionally needed to use the pliers to fix something that would have otherwise left him stranded on the side of the road, he says having pliers is important to him. Otherwise he could carry a Kershaw or a Cold Steel folder like all the other teachers I know who carry knives that they're not supposed to. :whistle:
-
Let's see if gdoolittle will like it.
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=296484;image)
-
That is awesome Kampfer :tu: Very generous of you indeed :like:
-
:hatsoff:
-
It sure was generous of him.. again I cant thank you enough Kampfer! :salute:
-
Yes it's a more urban or white collar tool. With that said I wish it had a can opener and a corkscrew which I think are urban tools. In terms of pairing I've had no luck as I'm trying to avoid tool duplication. Best I could do is pair it with a Pocket Wrench, Shard, and a p38. No corkscrew but I'm confident I can mod my way through opening a wine bottle. Not too happy with the clip either. Slips out too easily
I bought a Leatherman Minitool to replace my Skeletool. Smaller and cooler in a vintage way. Guess what? Skeletool is what I grab on a daily basis. Why? Form Follows Function. :like:
-
Yes it's a more urban or white collar tool. With that said I wish it had a can opener and a corkscrew which I think are urban tools. In terms of pairing I've had no luck as I'm trying to avoid tool duplication. Best I could do is pair it with a Pocket Wrench, Shard, and a p38. No corkscrew but I'm confident I can mod my way through opening a wine bottle. Not too happy with the clip either. Slips out too easily
I bought a Leatherman Minitool to replace my Skeletool. Smaller and cooler in a vintage way. Guess what? Skeletool is what I grab on a daily basis. Why? Form Follows Function. :like:
I put a suspension clip/pocket dangler on my :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh and it made it loads easier to carry and retrieve when pocket carrying :tu:
-
Yes it's a more urban or white collar tool. With that said I wish it had a can opener and a corkscrew which I think are urban tools. In terms of pairing I've had no luck as I'm trying to avoid tool duplication. Best I could do is pair it with a Pocket Wrench, Shard, and a p38. No corkscrew but I'm confident I can mod my way through opening a wine bottle. Not too happy with the clip either. Slips out too easily
I bought a Leatherman Minitool to replace my Skeletool. Smaller and cooler in a vintage way. Guess what? Skeletool is what I grab on a daily basis. Why? Form Follows Function. :like:
Three words....
True Utility Twistick :pok:
-
Yes it's a more urban or white collar tool. With that said I wish it had a can opener and a corkscrew which I think are urban tools. In terms of pairing I've had no luck as I'm trying to avoid tool duplication. Best I could do is pair it with a Pocket Wrench, Shard, and a p38. No corkscrew but I'm confident I can mod my way through opening a wine bottle. Not too happy with the clip either. Slips out too easily
I bought a Leatherman Minitool to replace my Skeletool. Smaller and cooler in a vintage way. Guess what? Skeletool is what I grab on a daily basis. Why? Form Follows Function. :like:
I put a suspension clip/pocket dangler on my :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh and it made it loads easier to carry and retrieve when pocket carrying :tu:
Just curious, I tried putting a split ring on the Mini and it interfered with the opening and closing. Did you have the same problem?
-
Yes it's a more urban or white collar tool. With that said I wish it had a can opener and a corkscrew which I think are urban tools. In terms of pairing I've had no luck as I'm trying to avoid tool duplication. Best I could do is pair it with a Pocket Wrench, Shard, and a p38. No corkscrew but I'm confident I can mod my way through opening a wine bottle. Not too happy with the clip either. Slips out too easily
I bought a Leatherman Minitool to replace my Skeletool. Smaller and cooler in a vintage way. Guess what? Skeletool is what I grab on a daily basis. Why? Form Follows Function. :like:
Three words....
True Utility Twistick :pok:
Ok you suck ;) I'm checking it out right now. Looks really cool but the reviews on Amazon seem to be mixed. I'm thinking.
-
I had the same kind of reservations about the Skeletool for years. Then I found one on sale for $30 last year.
It is my dress knife these days as it gives me my knife and pliers and the screwdriver in a lighter package than almost anything else I can find commercially. The smaller set of bits, that comes with the 1/4" bit adaptor, takes up about as much space as 4-5 quarters in my pocket after modifiying it to remove the 1/4" bit driver's mounting point. It might not be the prettiest gentleman's knife, but it is the most capable for the price.
-
Yes it's a more urban or white collar tool. With that said I wish it had a can opener and a corkscrew which I think are urban tools. In terms of pairing I've had no luck as I'm trying to avoid tool duplication. Best I could do is pair it with a Pocket Wrench, Shard, and a p38. No corkscrew but I'm confident I can mod my way through opening a wine bottle. Not too happy with the clip either. Slips out too easily
I bought a Leatherman Minitool to replace my Skeletool. Smaller and cooler in a vintage way. Guess what? Skeletool is what I grab on a daily basis. Why? Form Follows Function. :like:
I put a suspension clip/pocket dangler on my :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh and it made it loads easier to carry and retrieve when pocket carrying :tu:
Just curious, I tried putting a split ring on the Mini and it interfered with the opening and closing. Did you have the same problem?
You just have to watch what you are doing when opening and closing but with some patience it gets easier to use :cheers: The ease of carry is worth the few extra seconds it takes to open to me :tu: This isn't for work usually though as it is a weekend or night time carry :cheers:
-
I had the same kind of reservations about the Skeletool for years. Then I found one on sale for $30 last year.
It is my dress knife these days as it gives me my knife and pliers and the screwdriver in a lighter package than almost anything else I can find commercially. The smaller set of bits, that comes with the 1/4" bit adaptor, takes up about as much space as 4-5 quarters in my pocket after modifiying it to remove the 1/4" bit driver's mounting point. It might not be the prettiest gentleman's knife, but it is the most capable for the price.
Good idea about cutting the bit card down :o I may try this with one of the regular ones and see how it goes :think: :tu:
-
The Skele looks good on paper but the handles are uncomfortable when using the pliers and also the screwdriver is awkward. The blade is awesome though.
-
(http://forum.multitool.org/index.php?action=dlattach;topic=55539.0;attach=137721;image)
-
That is awesome Kampfer :tu: Very generous of you indeed :like:
Not only that, he forgot to mention he also got one for me.
Can't praise this gentleman enough, it's been like this every time I've dealt with him
The world should be full of Kampfs, he is something you rarely see today on the street, or the Internet
Hats off to him :cheers:
-
(http://forum.multitool.org/index.php?action=dlattach;topic=55539.0;attach=137721;image)
I couldn't agree more with this diagram. Simultaneously underprepared and overprepared. Everything you don't want, and nothing you do want (or at least not how you want it to be)
-
That diagram sums it up. It gets you there.
-
That diagram sums it up. It gets you there.
It gets the tool there.... hurled over the fence in frustration :D
In all seriousness :hatsoff: to Kam for his generosity again. I'll never be convinced that the Skele is anything other than a horrible design and a thoroughly unpleasant tool to try and use, but I'm also convinced Kam is a real credit to this community and it's wonderful having him here :cheers:
-
(http://forum.multitool.org/index.php?action=dlattach;topic=55539.0;attach=137721;image)
Most of the time I am sure I would be prepared enough with the Skeletool :cheers: It is those "other" times that I carry MTs that have more on them for work though :tu:
Just wished they hadn't changed to a combo blade in the Skeley but other than that it is a great tool :tu: :like: :like:
-
(http://forum.multitool.org/index.php?action=dlattach;topic=55539.0;attach=137721;image)
That was something I created at the end of Skeletool challenge to sum up teh Skeletool series.
Here is the original one from Leatherman.
-
Another one from me, Skeletooling for Dummies
(http://forum.multitool.org/index.php?action=dlattach;topic=55539.0;attach=136195;image)
-
Look what came in today!!!! Again I cant thank you enough Kampfer! What a great member here at MTO. I cant wait to give it some pocket time! I never thought that I would meet people on the internet who are this generous. Thank you again Kampfer!
(http://uploads.tapatalk-cdn.com/20161211/6401fd7f373be5a147ae542da8904e6d.jpg)
-
I am glad it finally arrived.
Start using it and report back. :multi:
-
Will do!
-
Tomorrow would be a good day to start carrying it Skeletool Sunday (http://forum.multitool.org/index.php/topic,69416.0.html) :whistle:
:D
Congrats again on getting it :cheers: and again for the generosity Kampfer :salute: :salute: :salute:
-
I am glad it finally arrived.
Start using it and report back. :multi:
I posted my initial thoughts in a reply to poncho in skeletool sunday if you are interested in reading them!
-
Cyberdyne Systems Model 101 Series 800 equips with standard issue breaching tool.
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297189;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297191;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297193;image)
-
Can a MT look cooler than Skulletool?
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297189;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297191;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297193;image)
Thats quite a photogenic skeleton you have there
-
Can a MT look cooler than Skulletool?
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297189;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297191;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297193;image)
Thats quite a photogenic skeleton you have there
You do know Skulletool is Cyberdyne Systems Model 101 Series 800's standard issue breaching tool. :pok:
-
Can a MT look cooler than Skulletool?
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297189;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297191;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297193;image)
Thats quite a photogenic skeleton you have there
You do know Skulletool is Cyberdyne Systems Model 101 Series 800's standard issue. :pok:
:o
-
Cyberdyne Systems Model 101 Series 800 equips with standard issue breaching tool.
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297189;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297191;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297193;image)
That is some totally awesome pics and makes the Skeley/Breaching tool look just like something out of the Terminator movies :o :like: :like: :like:
-
Cyberdyne Systems Model 101 Series 800 equips with standard issue breaching tool.
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297189;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297191;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=69652.0;attach=297193;image)
There can be only one.....banana!
-
:assimilate:
-
Any new development ?
How are you guys liking your free skelly?
-
Not addressed to me Kamfer but I love my Skelly. I did put it in semi retirement. Walmart had a special combo deal that I could not resist on the crkt drifter and viva. So I'm rocking those and my Squirt P4 instead. Just fits better in my pocket.
But the Skelly will come out to be used once and a while. Just semiassembled a drone my son just got for Christmas. It will come with me on any biking trips👍
-
You can address to me, no worries.
Skeletool is for those don't carry a folder, as it is really a folder itself.
-
I agree, for what is worth after carrying locking knives for several years it's a bit hard to me to go back to slip joints. And the liner lock on the Skelly feels a bit flimsy unfortunately. But I'm sure that's all mental. The lock up does feel solid.
-
I agree, for what is worth after carrying locking knives for several years it's a bit hard to me to go back to slip joints. And the liner lock on the Skelly feels a bit flimsy unfortunately. But I'm sure that's all mental. The lock up does feel solid.
save your money get Signal and Join Challenge http://forum.multitool.org/index.php/topic,69865.0.html :cheers: :cheers: :cheers:
-
No thanks.
-
I agree, for what is worth after carrying locking knives for several years it's a bit hard to me to go back to slip joints. And the liner lock on the Skelly feels a bit flimsy unfortunately. But I'm sure that's all mental. The lock up does feel solid.
If that is case you should stay away from SOG reactor and all other Gerber tools.
Skeletool locks up like a bank vault comparing to them.
-
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2016-12/20161224_000415_zpsuoqie3n9.jpg)
Skele, Spirit and Swift are cuttin' it for me these first days of 2017. 3 ESSSELENT tools!
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2016-12/20161224_003019_zpsrsa5kpac.jpg)
-
Any new development ?
How are you guys liking your free skelly?
I have really started to like mine!! Its perfect for edc paired with a SAK. Contrary to most, I actually like the way that the driver works. Its somewhat comfortable to me. I wasn't able to carry it on my recent trip because of strict New York City knife laws and I sure miss it! I definitely love the Skelly!!! It is kind of like the Vic Compact of Leathermans.
-
Well,
I have one, had it for years. I purchased the first year they were produced... 2007-2008. I bought it to hike the West Coast trail in BC Canada. The moment I took it out of its case I hated it, hated the feel of it in my hands... it actually hurts (me) to squeeze it or apply any forced with them. So I use full size pliers and the pain is gone... Blah, Blah Blah my Swiss Tool does not hurt.
Anyhow, why the SOB story? my Skeletool has never been used, only taken out for Maintenance (cleaning/oiling). It is collecting dust. I tried trading it, selling it... now I am giving it away to the first person to PM me, this according to the clock on this server (order of receipt). You will need to supply me with shipping funds (the tool is in Canada). As the picture depicts, it is fully loaded with bits, extension and leather case.
Good luck...
-
That is very generous of you. Alas, I just received one yesterday so hopefully yours goes to someone who needs one.
-
That is very generous of you. Alas, I just received one yesterday so hopefully yours goes to someone who needs one.
Yes me too, I am sure someone will pipe in shortly... :)
-
won't last a minute. It is really nice!
Come on someone! :rofl:
-
I guess I am not the only person whom despises this tool...can't even give it away.
Still available... no takers yet!
:pok:
-
Just to show off I actually own two Skellys, I love them :tu:
and sometimes hold one in each hand just to annoy Al :angel: :whistle:
Hi Al :waving:
:D :cheers:
-
I guess I am not the only person whom despises this tool...can't even give it away.
Still available... no takers yet!
:pok:
If only shipping is required, then I'd be in for another, can't say no to such a nice thing... :whistle:
-
Sparky!
:D
-
I guess I am not the only person whom despises this tool...can't even give it away.
Still available... no takers yet!
:pok:
If only shipping is required, then I'd be in for another, can't say no to such a nice thing... :whistle:
The Peacent... it is yours
PM me your mailing address in Spain... I'll check Canada Post on Monday for the rates.
-
Sparky!
:D
You think I'm joking >:D
-
No Not at all...
-
So kind, as usual here at Mt.org. Amazed! :cheers:
What a way to start new year... :ahhh
-
Just to show off I actually own two Skellys, I love them :tu:
and sometimes hold one in each hand just to annoy Al :angel: :whistle:
Hi Al :waving:
:D :cheers:
I thought you were just being kind and keeping them out of my way so they didn't irritate me and set me off on a rant :D
-
Just to show off I actually own two Skellys, I love them :tu:
and sometimes hold one in each hand just to annoy Al :angel: :whistle:
Hi Al :waving:
:D :cheers:
I thought you were just being kind and keeping them out of my way so they didn't irritate me and set me off on a rant :D
Well that annoying tool is almost gone off my desk... LOL
Going to Spain on Monday... if Canada Post is not too too pricey.
-
Speaking of Skeletools , does anyone have an extra Flathead bit ? I just got a used CX and it's missing the double flat tip bit. I'm trying to avoid buying a whole set just for one bit.
:cheers:
(http://i.imgur.com/bRmSltLh.jpg)
-
I thought you were just being kind and keeping them out of my way so they didn't irritate me and set me off on a rant :D
You do occasionally have a point Mate :D
-
That was a very generous offer Marc_in_NS . I wish I'd been online earlier. If shipping to Spain is too much I'd be honored to be considered for your back up plan. I've only been carrying my skele for a couple of days but I'm kind of liking it. Of course, I'm only carrying it for the knife blade and pliers and I have a Champion in my pocket to do everything else.
-
Speaking of Skeletools , does anyone have an extra Flathead bit ? I just got a used CX and it's missing the double flat tip bit. I'm trying to avoid buying a whole set just for one bit.
:cheers:
(http://i.imgur.com/bRmSltLh.jpg)
If I had an extra like the one you are asking for I would send it Steve but I only have the one set of bit cards and a couple of those are gone as well :facepalm: :D
-
Congrats Peacent on getting another Skeley :like:
and what generosity Marc :cheers: :cheers: :salute: :tu:
-
My weekend: the new cartridge for the leaky bathroom faucet finally came in. With the Skelly I disassembled the handle and replace the cartridge.
Later that same day my son told me about a loose shower faucet handle. Tightened it up with the bit extender and a hex key I had stashed around (really need to think about finding a way to edc the LM bit cards I have downstairs) . Ended up doing the same for a few loose drawer handles.
I love the tool, and end up carrying with me around me the house as I'm always doing these small odd jobs and that bit extender really reaches in. I haven't even used the extra LM bits yet, have been able to use my other tools that I keep stashed around the house. But I feel reassured that I have it as a back up.
My only gripe is that it is not as pocketable as my Mini Tool during work, so the Skeletool stays around the house or goes out with me during my play time.
I love my Mini Tool, but no bit extender or Phillips (sigh). I ranted a bit about this in the EDC Philosophy thread. Need to find that dream tool that is Leatherman branded. :ahhh
-
My weekend: the new cartridge for the leaky bathroom faucet finally came in. With the Skelly I disassembled the handle and replace the cartridge.
Later that same day my son told me about a loose shower faucet handle. Tightened it up with the bit extender and a hex key I had stashed around (really need to think about finding a way to edc the LM bit cards I have downstairs) . Ended up doing the same for a few loose drawer handles.
I love the tool, and end up carrying with me around me the house as I'm always doing these small odd jobs and that bit extender really reaches in. I haven't even used the extra LM bits yet, have been able to use my other tools that I keep stashed around the house. But I feel reassured that I have it as a back up.
My only gripe is that it is not as pocketable as my Mini Tool during work, so the Skeletool stays around the house or goes out with me during my play time.
I love my Mini Tool, but no bit extender or Phillips (sigh). I ranted a bit about this in the EDC Philosophy thread. Need to find that dream tool that is Leatherman branded. :ahhh
Great use of the Skeley :cheers: :cheers: :tu:
The bit adapter fits over the file of the :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh pretty good and would add a bit of versatility to it but I wouldn't torque a whole lot on it as it might break a stiff file :think: But on regular tightening and loosening duties it should be fine :tu:
-
Good idea Poncho. I didn't know that. I read somewhere too that the discontinued Tool Adaptor will fit. Not sure which generation. I saw one for sale for $24.99, and another site had them for $90.
-
Good idea Poncho. I didn't know that. I read somewhere too that the discontinued Tool Adaptor will fit. Not sure which generation. I saw one for sale for $24.99, and another site had them for $90.
Either of those that are discontinued would work but the one I am talking about just fits over the Phillips driver and you can use both the LM flat bits and reg 1/4" bits in it :tu:
-
New page banana man dance
:nanadance: :nanadance:
-
This seller (https://www.ebay.com/itm/192710689221) probably jumped thru the roof with joy when having his hand on this "rare piece". :facepalm:
-
:facepalm:
-
:rofl:
-
The skeletool has its uses and limitations as well. Great for minimalist approach, good as a day hike/office tool. Not heavy duty but not heavy to carry. i always think of the signal as a skeletools big brother. just wish they would go back to the slimmer grip early models. The extra cost of the sx with carbon fiber and better 154 cm blade is also a bit of a catch. I bought my sx used on the bay for less than a new reg model, now the prices are climbing. All in all a good tool for some. Very handy for non recessed screws etc. use the bit kit and a good all around device.. I have the rescue model also and would like to see the glass breaker bit sold seperately, their interpretation of whats needed in a 154 cm serrated blade isnt the best for every day tasks, but supposedly great for rescue work. its a good solid design.
-
I like the Skeletool, but it’s in and out of my office daily carry. Takes too much space as I prefer to carry a dedicated folder. Plus too many crevices and holes to clean. Spacewise the LM MiniTool and Cadet is much better with same functionality IMHO.
But I go back once in a while. It’s a great tool.
I was able to score the glassbreaker bit so I have that now in the regular Skelly with 154CM PE. Though I believe that the newer cars have glass that you no longer can shatter but have to saw.
-
My favorite part of the skeletool is to get to the screwdriver all you have to do is open the handle, no fishing out the bit holder after.