-
IT'S FINALLY HERE
We had to place an order of 100 and it is 1st come 1st serve so there will be a special discount given at check out untill November 20th.
The design is a little differant than the poll results but hay this is OURS!!
There will be shipping but with the discount mine shows to be under the $65.00 US we discussed.
SO GO GET IT!!!
Rember there are ONLY 100 so hurry up!!!
-
It might Help I I rembered to post the link. :facepalm: :facepalm:
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html
:gimme: :gimme: :gimme: :gimme: :gimme: :gimme: :gimme: :gimme: :gimme: :gimme: :gimme:
-
Groovy. I wanted to order a used vic executive from the store as well, but it seems I am unable to.
Are they sold out, or am i missing a nested dropdown menu somehow?
-Tom
-
:drool:
Only 46 euro? :o
Groovy. I wanted to order a used vic executive from the store as well, but it seems I am unable to.
Are they sold out, or am i missing a nested dropdown menu somehow?
-Tom
Seems to be sold out. :-\
-
Anyone euroside want share a mail envelope with me and be a middleman? I'll happily pay for transatlantic shipping for the both of us. This arrangement will save me EUR60 in customs.
-Tom
Edit If noone bites, I'll pull the trigger saturday.
-
I tried to order one, but I don't see any discount, and when I continue to "Shipping" I get:
Unfortunately, there are no carriers available for your delivery address.
But I have ordered from the store in the past :think:
-
I tried to order one, but I don't see any discount, and when I continue to "Shipping" I get:
Unfortunately, there are no carriers available for your delivery address.
But I have ordered from the store in the past :think:
Oh wait... I logged out and logged in again, and now I do get the shipping options. However, I don't see any discount?
What discount should I be able to get? :think:
Right now it shows € 61.59 (around $ 72)
Which makes it a total of € 81.18 (around $ 96) with tracked shipping included
-
I thought it had been decided to have MTO2016 on the engraving plate and nothing on the knife blade?
Sent from my iPhone using Tapatalk
-
I thought it had been decided to have MTO2016 on the engraving plate and nothing on the knife blade?
Sent from my iPhone using Tapatalk
Thought so too.
I honestly don't like this design all that much and might pass.
-
Ordered, but no discount - $72.38.
-
IT'S FINALLY HERE
We had to place an order of 100 and it is 1st come 1st serve so there will be a special discount given at check out untill November 20th.
The design is a little differant than the poll results but hay this is OURS!!
There will be shipping but with the discount mine shows to be under the $65.00 US we discussed.
SO GO GET IT!!!
Rember there are ONLY 100 so hurry up!!!
Hi, the MTO P-X looks stunning and I want to order one. Do you know how to get this discount? Do I need to enter a promo code or something? :cheers:
-
Just sent a message to Grant. When he sent me the link to post I tried it and a discount was showing up after I put one in my cart. Maybe it's an easy fix.
I'll keep you all informed as often as I can. Just got the word I have to run an after hours call 2 hours out of town so I'll be unable to post for a while.
-
Nice knife, but unfortunately the blank engraving plate and another keyring I have to file off makes it a pass for me. :(
-
I think I may have fixed the glitch that was keeping people from getting the discount.
It should be correct now.
Def
-
Ordered, but no discount - $72.38.
Order has been partially refunded to make up for the loss of the discount.
Def
-
Mmmm :drool: my first colored pioneer x.
Sent from my iPhone using Tapatalk
-
Ordered, but no discount - $72.38.
Order has been partially refunded to make up for the loss of the discount.
Def
Thanks Def!!!
-
Ordered, but no discount - $72.38.
Order has been partially refunded to make up for the loss of the discount.
Def
Thanks Def!!!
No worries.
If anyone else has any problems with overpayment or anything, please let me know. I am happy to refund the differences- just make sure you let me know before I accidentally blow all of your money on booze and fast cars! :P
Def
-
I tried multiple times to order but was unsuccessful...
No discount (abandoned process because it didn't meet my price parameters).
After learning about the discount, it wouldn't let me sign in and after completing info, it wouldn't accept my e-mail and password (I am already signed in plus maintain a password database for each website that requires it, so it wasn't a matter of me forgetting my password). I was expecting an easy Paypal transaction and was uneasy about payment method since a credit card request would be a deal-breaker for security reasons.
The MTO Pioneer looks great but I'm done trying for now.
Jim
-
I ordered mine! :ahhh :ahhh :ahhh
I found that I had to switch from Canadian Loonies to USA Dollars, after that ordering was a snap. In fact, it went so well, I'm tempted to do it again. However, out of a sense of community, I'm holding off until others have had a chance to place an order. But come November 19th, all bets are off....... >:D
(BTW, the pre-order discount shows up at checkout. Don't sweat the small stuff: order!)
-
I ordered mine! :ahhh :ahhh :ahhh
I found that I had to switch from Canadian Loonies to USA Dollars, after that ordering was a snap. In fact, it went so well, I'm tempted to do it again. However, out of a sense of community, I'm holding off until other have a chance to place and order. But come November 19th, all bets are off....... >:D
(BTW, the pre-order discount shows up at checkout. Don't sweat the small stuff: order!)
I followed your suggestion and selected USD and ordering proceeded without a hitch. I am now in the queue for delivery of a red MTO Pioneer X--very happy!!!
Jim
-
:tu: :tu: :tu:
-
:tu: :tu: :tu:
Now waiting for the day...
:mail:
-
:tu: Order confirmed 8) :D :ahhh
-
Whats shipping to California ?
-
Whats shipping to California ?
Shipping to Redmond, WA was a reasonable $6.83.
-
Whats shipping to California ?
Shipping to Redmond, WA was a reasonable $6.83.
Thats great thank you.
-
So changing from ca to usd on the website makes a difference if you are from the U.S. If PayPal converts it it’s $63.56. If it’s converted on the website it’s $63.12.
Sent from my iPhone using Tapatalk
-
So changing from ca to usd on the website makes a difference if you are from the U.S. If PayPal converts it it’s $63.56. If it’s converted on the website it’s $63.12.
Sent from my iPhone using Tapatalk
Says $72.38 for me in USD??
Sent from my iPhone using Tapatalk
-
Oh man, i totally just threw away 44cents :facepalm: :facepalm: :facepalm: :facepalm: My day is ruined. :cry:
-
How do you need to sign in to store for discount?
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171103/11b668025f8b4ef82fe0d5253bc17c1d.jpg)
-
How do you need to sign in to store for discount?
Sent from my iPhone using Tapatalk
did you register an account?
Just checked and my total with shipping was $61.47.... not bad!
-
How do you need to sign in to store for discount?
Sent from my iPhone using Tapatalk
did you register an account?
Just checked and my total with shipping was $61.47.... not bad!
Yes but maybe I did Something wrong?
Sent from my iPhone using Tapatalk
-
:( :think:
-
I logged out and back in and now it’s working!
Sent from my iPhone using Tapatalk
-
:woohoo: :woohoo:
IT'S WORKING
Just made a quick pit stop to check in.
Def thanks for such a quick fix.
There's a lot of excitement in the air. Let's keep it going to show Victorinox just what we can realy do and Grant just how greatfull we are.
It would be great to sell out before the 20th. :tu: :tu:
Just DON'T buy them all before I can order mine.... PLEASE :ahhh, PRETTY PLEASE :ahhh, PRETTY PLEASE with whipped cream and a cherry on top..... :whistle:
-
I can't pull the trigger just yet as the 1st of the month hit hard. Can I ask how durable the wording on the blade will be? Is it etched? I ask cause if there still available when I can buy I want to use mine.
I'm excited to see this come to pass and tho I wasn't in on the thread talking about it I followed. Thanks Douglass/Boss and all who made this happen.
-
I just placed an order. :D :D :D 1 for now... Don't want to rob forum members of a chance to get theirs without a fair shot.
Curious - Is it one $16 discount per order, or per pioneer X?? Because I'll probably pick up more if there's still some leftover later on.
Wow, I can't believe it was finalized so fast! I logged on and scrambled to place an order worried I might have already missed out! :ahhh
-
I can't pull the trigger just yet as the 1st of the month hit hard. Can I ask how durable the wording on the blade will be? Is it etched? I ask cause if there still available when I can buy I want to use mine.
I'm excited to see this come to pass and tho I wasn't in on the thread talking about it I followed. Thanks Douglass/Boss and all who made this happen.
Mine will definitely be a user. I believe it's laser printed... :think:
-
I can't pull the trigger just yet as the 1st of the month hit hard. Can I ask how durable the wording on the blade will be? Is it etched? I ask cause if there still available when I can buy I want to use mine.
I'm excited to see this come to pass and tho I wasn't in on the thread talking about it I followed. Thanks Douglass/Boss and all who made this happen.
Mine will definitely be a user. I believe it's laser printed... :think:
I sure hope so. I cannot imagine anything else. It needs to be used as I've been waiting for a PX but this is next level. I think I have enough ramen to get me thru the month :D
-
Ordered :salute: :drool: :cheers:
-
Mine will definitely be a user.
For sure. The only way, in my eyes, to honor a knife is to use it. All the knives I really love show some signs of wear. Sometimes some really dramatic signs of wear.
-
Amount is in Canadian dollars, and it only allows me to send to a Canadian province, not a US state.
-
Amount is in Canadian dollars, and it only allows me to send to a Canadian province, not a US state.
There is an option to change to US dollars :tu: I am sure that will fix the shipping problem for you as well :cheers:
-
Totally stoked for this knife and can't wait for it :woohoo: :like:
-
Amount is in Canadian dollars, and it only allows me to send to a Canadian province, not a US state.
What Poncho said. I had the same issue at first. :tu:
-
Totally stoked for this knife and can't wait for it :woohoo: :like:
+1!
-
I just had to enter my address three times. When it came time to check out, it had the wrong address and would not allow me to edit. To hell with it.
-
I just had to enter my address three times. When it came time to check out, it had the wrong address and would not allow me to edit. To hell with it.
That sucks, man. I wonder what's the dealio? I had no problems :think:
-
really like this, but can't afford right now, is the etching the reason its so much more than a reg X?
-
I just had to enter my address three times. When it came time to check out, it had the wrong address and would not allow me to edit. To hell with it.
Don't get excited buddy :D Just PM Grant and I am sure he will help you out with your problem :salute: :tu:
-
really like this, but can't afford right now, is the etching the reason its so much more than a reg X?
I think the different color versions are a little higher than the plain silver :think:
-
I just had to enter my address three times. When it came time to check out, it had the wrong address and would not allow me to edit. To hell with it.
Sorry it was a problem for you. Come back in the morning and give it a shot when you're fresh. Be sure to change from Canadian money to US dollars. After that, change country to USA. Once I had done those things, everything else seemed to fall into place.
Good luck!
-
This is cool! Glad this came to fruition. :climber:
Is there a way to see a real picture of the knife, blade out. Curious to see this thing!! (Or are they not in anyone's hands yet to do so?)
-
Whew. Order confirmed.
Sent from my iPhone using Tapatalk
-
This is cool! Glad this came to fruition. :climber:
Is there a way to see a real picture of the knife, blade out. Curious to see this thing!! (Or are they not in anyone's hands yet to do so?)
They don't exist yet, so no pictures of the actual ones. All we have right now is the mock up/ proof that is pictured in the store.
Def
-
I just had to enter my address three times. When it came time to check out, it had the wrong address and would not allow me to edit. To hell with it.
I see that you have registered at least two accounts in the store. If you PM me your Paypal address I will send you an invoice and we can sort it out that way. :tu:
Def
-
Thanks Def for stepping in. Still on the road, just stopped for a quick check-in. At least I'm on the road home now.
I'll try to post more info when I get home in a couple of hours. Thanks to all of you who alredy placed your preorders. I would encourage you all to spread the excitement as far and wide as possible. It would be amazing if we could sell out before the 20th but we realy need to have at least 50 preorders before then and 75 would be far more comfortable. With a membership in the thousands that's realy not many, but it's all up to you to make this thing....
(http://s2.quickmeme.com/img/79/794ccc4e908a1b838de422ef6a921c898a6a572a71a89d4486d937462343e2a4.jpg)
-
This is cool! Glad this came to fruition. :climber:
Is there a way to see a real picture of the knife, blade out. Curious to see this thing!! (Or are they not in anyone's hands yet to do so?)
They don't exist yet, so no pictures of the actual ones. All we have right now is the mock up/ proof that is pictured in the store.
Def
No problem. I bet they're going to look even better in real life! :tu:
-
I just had to enter my address three times. When it came time to check out, it had the wrong address and would not allow me to edit. To hell with it.
I see that you have registered at least two accounts in the store. If you PM me your Paypal address I will send you an invoice and we can sort it out that way. :tu:
Def
Once again defeated by modern technology.
Thanks for taking care of it. :cheers:
-
If you order more than one item (the group buy that we have going for Filipino's) do you only get the one discount or is it per knife?
-
If you order more than one item (the group buy that we have going for Filipino's) do you only get the one discount or is it per knife?
Sorry I don't know the answer YET. But I will find out from Grant/Def and post for all to see.
-
If you order more than one item (the group buy that we have going for Filipino's) do you only get the one discount or is it per knife?
Sorry I don't know the answer YET. But I will find out from Grant/Def and post for all to see.
I'm crossing my fingers (and toes) that it's for each knife!
-
Whew that was a long day. I'm finaly home. Sorry I did not have time to roll out more details about the engraving on the blade but this is what Vic would do and it's MTo all-out. :tu: Everything else is exactly the poll results. :drool: If I counted right we show to have 15 preorders confirmed here in the thread at this time. It's a great start, let's keep the momentum going and we'll sell all100 in just over 4 days or a total of 100 hours from the start of this thread. 100 pioneer X's in 100 hours WOW! :o :o That would be some achievement and quite a statement to Victorinox. Keep it up. You guys are awesome.
-
If you order more than one item (the group buy that we have going for Filipino's) do you only get the one discount or is it per knife?
Sorry I don't know the answer YET. But I will find out from Grant/Def and post for all to see.
I'm crossing my fingers (and toes) that it's for each knife!
How many ya gonna buy there? ;) curious how many a left so far :think: need payday to come I guess sooner than later ::) definitley want to get one and sport this one!!
-
You guys better get after it I got friends and family want'n em....
I'm bearly able to hold'm back....
The :drool: :drool: :drool: :drool: gett'n pretty deep around here and my feet might just slip. There'll be no stopp'n em then... :rofl:
-
If you order more than one item (the group buy that we have going for Filipino's) do you only get the one discount or is it per knife?
Sorry I don't know the answer YET. But I will find out from Grant/Def and post for all to see.
I'm crossing my fingers (and toes) that it's for each knife!
How many ya gonna buy there? ;) curious how many a left so far :think: need payday to come I guess sooner than later ::) definitley want to get one and sport this one!!
A handful so far, and still asking others who might be interested now that the price is out
Can someone post the illustration here? Can't access the site from my mobile phone right now...
-
Ahhhh.... (https://uploads.tapatalk-cdn.com/20171104/1d1f954809a7b50d2e6757cb0459007e.jpg)
-
If you order more than one item (the group buy that we have going for Filipino's) do you only get the one discount or is it per knife?
Sorry I don't know the answer YET. But I will find out from Grant/Def and post for all to see.
I'm crossing my fingers (and toes) that it's for each knife!
How many ya gonna buy there? ;) curious how many a left so far :think: need payday to come I guess sooner than later ::) definitley want to get one and sport this one!!
I don't expect any less than 10 or much more than 15.
-
If you order more than one item (the group buy that we have going for Filipino's) do you only get the one discount or is it per knife?
Sorry I don't know the answer YET. But I will find out from Grant/Def and post for all to see.
I'm crossing my fingers (and toes) that it's for each knife!
Looks like the discount is per order not per knife though I've only just established that after I've ordered ... Doh !
-
Ordered :whistle:
-
This morning I ordered mine.
Thanks for all the efforts you did!
To be honest, I didn't expect Victorinox to accept small orders like this one. You did a great job :tu:
-
This morning I ordered mine.
Thanks for all the efforts you did!
To be honest, I didn't expect Victorinox to accept small orders like this one. You did a great job :tu:
Ditto :like:
-
17 sold by now :tu:
-
This morning I ordered mine.
Thanks for all the efforts you did!
To be honest, I didn't expect Victorinox to accept small orders like this one. You did a great job :tu:
As my dad used to say, "when there's a wheel, there's a road"
What makes this doubly impressive is that it's below the $65 target the group set
-
Cool that the MTO PX is there.
But is there really nothing on the scale plate?
-
I wonder if it's worth the risk without tracking.
It turns this one above budget...
-
I wonder if it's worth the risk without tracking.
It turns this one above budget...
I ordered with tracking :)
With tracking the total is € 67.49
I consider this a very reasonable price for a red Pioneer X.
Now let's hope it slips through customs without extra charges :D
-
If you order more than one item (the group buy that we have going for Filipino's) do you only get the one discount or is it per knife?
The software is set so that you can get the discount on up to ten knives. If you need/want to order more than that, please contact me directly, either in a PM here or an email at grant@multitool.org or store@multitool.org.
If you have ordered multiple knives and did not get a discount on each knife please send me a PM or email and I will refund you the difference. I have no desire to have members pay any more than they absolutely have to, which is why we are doing this pre-order in the first place!
Def
-
Cool that the MTO PX is there.
But is there really nothing on the scale plate?
There is red anodizing on the scale plate. Otherwise it is blank.
Def
-
Oh yeah, and let's all make sure we thank Douglas for making this one happen. If he hadn't been fanning the flames to keep it going, I would have let it drop.
He's the real hero on this one!
Def
-
Agreed. :clap: :clap: :clap:
I'm going to see about having my scale plate engraved with my MTo.org screen name. :cheers:
-
If you order more than one item (the group buy that we have going for Filipino's) do you only get the one discount or is it per knife?
The software is set so that you can get the discount on up to ten knives. If you need/want to order more than that, please contact me directly, either in a PM here or an email at grant@multitool.org or store@multitool.org.
If you have ordered multiple knives and did not get a discount on each knife please send me a PM or email and I will refund you the difference. I have no desire to have members pay any more than they absolutely have to, which is why we are doing this pre-order in the first place!
Def
Thank you for this, Def! You rock! :2tu:
-
Oh yeah, and let's all make sure we thank Douglas for making this one happen. If he hadn't been fanning the flames to keep it going, I would have let it drop.
He's the real hero on this one!
Def
You pulled it off, Doug! Two thumbs up! You rock more! :D :2tu: :hatsoff:
-
Agreed. :clap: :clap: :clap:
I'm going to see about having my scale plate engraved with my MTo.org screen name. :cheers:
Now this is an excellent idea! I might do the same, J! :cheers:
I wonder if 100 years from now, will this increase or decrease the MTO PX's value over at eBay :D
-
Agreed. :clap: :clap: :clap:
I'm going to see about having my scale plate engraved with my MTo.org screen name. :cheers:
Now this is an excellent idea! I might do the same, J! :cheers:
I wonder if 100 years from now, will this increase or decrease the MTO PX's value over at eBay :D
:like:
I too LOVE the IDEA. As for 100 yrs from now. Probably not for the average Shmoe, but for the MTo Joe 100 times more valuable. :whistle:
Hay someone needs to pick that screen name. MTo Joe kinda got a ring to it. :cheers:
-
Oh yeah, and let's all make sure we thank Douglas for making this one happen. If he hadn't been fanning the flames to keep it going, I would have let it drop.
He's the real hero on this one!
Def
You pulled it off, Doug! Two thumbs up! You rock more! :D :2tu: :hatsoff:
Thanks Guys,
Just remember you are the flames and with out ALL of you this would have died and I too would have drooped it.
Nix,
We owe you a special thanks as well.
You brought this back to life in the first place. Then there were a couple of times when it was going slow that you gave me words of encouragement (and maybe evan a kick in the pants or two) that kept me going. I came very close to dropping it also. If you had not piped up, well....
But I didn't drop it and here we are so thanks everyone :hatsoff:
NOW GO BUY SOME MORE !!!! :pok: :pok: :whistle:
-
For those of you that want to engrave the plates, I would strongly suggest you find someone who does laser engraving as the anodizing can chip with a standard engraver. It would be terrible to try and improve one of these and end up with red flakes everywhere! :ahhh
Def
-
Aaaaand it's ordered...
Wouldn't feel like a true SAKnight without one...
Daaaamn you MTO!!
That was my wallet shouting...
-
Aaaaand it's ordered...
Wouldn't feel like a true SAKnight without one...
Daaaamn you MTO!!
That was my wallet shouting...
:rofl: :rofl: :rofl:
:like:
-
Aaaaand it's ordered...
Wouldn't feel like a true SAKnight without one...
Daaaamn you MTO!!
That was my wallet shouting...
Yours too huh? :P
Def
-
:2tu: It's red, it has scissors, I :like: it, funds sent!
Forgot the most important point, it's MTO!!!!!! :gimme:
-
Aaaaand it's ordered...
Wouldn't feel like a true SAKnight without one...
Daaaamn you MTO!!
That was my wallet shouting...
Yours too huh?
Def
I'm working on a cartoon regarding this PX... stay tuned
-
Hay I just noticed some thing missing...Some thing BIG!
-
Cool that the MTO PX is there.
But is there really nothing on the scale plate?
Yeah, I wouldn't have minded "MTO 2016" or just "2016," something like that. But I usually think they look good without a marking too, would hate to see stores who make special alox orders required to put their logo on the back every time.
Do we have any idea on when Victorinox might make them? Would be nice if they came before Christmas. :gimme:
-
Some thing YELLOW!
-
We're on page 4 and no BIG YELLOW BANNANA DANCE!
(http://www.sherv.net/cm/emo/funny/2/big-dancing-banana-smiley-emoticon.gif) (http://www.sherv.net/)(http://www.sherv.net/cm/emo/funny/2/big-dancing-banana-smiley-emoticon.gif) (http://www.sherv.net/)(http://www.sherv.net/cm/emo/funny/2/big-dancing-banana-smiley-emoticon.gif) (http://www.sherv.net/)(http://www.sherv.net/cm/emo/funny/2/big-dancing-banana-smiley-emoticon.gif) (http://www.sherv.net/)(http://www.sherv.net/cm/emo/funny/2/big-dancing-banana-smiley-emoticon.gif) (http://www.sherv.net/)(http://www.sherv.net/cm/emo/funny/2/big-dancing-banana-smiley-emoticon.gif) (http://www.sherv.net/) (http://www.sherv.net/)
-
Cool that the MTO PX is there.
But is there really nothing on the scale plate?
Yeah, I wouldn't have minded "MTO 2016" or just "2016," something like that. But I usually think they look good without a marking too, would hate to see stores who make special alox orders required to put their logo on the back every time.
Do we have any idea on when Victorinox might make them? Would be nice if they came before Christmas. :gimme:
We don't have an exact time line yet but it looks like it will be tight. We are hoping to get a realy quick turn around and it looks positive especialy if the preorders keep rolling in like this. Still maintaining at about a 1 per hour rate, but we can't assume this will continue. Keep it out in font and let everyone you can think of know about it. :pok: :pok: sell, sell, sell :pok: :pok:
-
Aaaaand it's ordered...
Wouldn't feel like a true SAKnight without one...
Daaaamn you MTO!!
That was my wallet shouting...
Yours too huh?
Def
I'm working on a cartoon regarding this PX... stay tuned
:popcorn: :popcorn:
-
34 sold already, nice! :2tu:
Thank you Douglas and Def for making this happen :hatsoff:
-
:like: :gimme:
I am currently taking an internet hiatus, but couldn't resist this knife: Ordered!
-
.
.
(https://uploads.tapatalk-cdn.com/20171104/8ca9cd1ef28505d5254e7f6c5b29fc3c.jpg)
-
.
.
(https://uploads.tapatalk-cdn.com/20171104/8ca9cd1ef28505d5254e7f6c5b29fc3c.jpg)
Love it!!!! So true!!!
Sent from my iPhone using Tapatalk
-
.
.
(https://uploads.tapatalk-cdn.com/20171104/8ca9cd1ef28505d5254e7f6c5b29fc3c.jpg)
Love it!!!! So true!!!
Sent from my iPhone using Tapatalk
:rofl: :rofl: :rofl:
-
.
.
(https://uploads.tapatalk-cdn.com/20171104/8ca9cd1ef28505d5254e7f6c5b29fc3c.jpg)
:like:
-
.
.
(https://uploads.tapatalk-cdn.com/20171104/8ca9cd1ef28505d5254e7f6c5b29fc3c.jpg)
Excellent - nice one!
-
Very good! :clap:
-
I nominate that cartoon as the official November Calendar page for 2018. Any seconds?
-
:rofl:
It aint higher res. then you're seeing it here though.
-
.
.
(https://uploads.tapatalk-cdn.com/20171104/8ca9cd1ef28505d5254e7f6c5b29fc3c.jpg)
:like::like::like:
Sent on my SM-G930F with Tapatalk
-
Feeling pretty foolish - but where does one actually order these ?
Ah - over in the store - Doh . . . .
-
This is a great place to repost the stor link so here it is.
:gimme: :gimme: :gimme: :gimme: :gimme:
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html
-
Ordered :)
In my eagerness I forgot to add a swiss army knight pokerchip :facepalm:
But that will have to wait until I order my 2nd one I suppose :angel:
-
Cool that the MTO PX is there.
But is there really nothing on the scale plate?
Yeah, I wouldn't have minded "MTO 2016" or just "2016," something like that. But I usually think they look good without a marking too, would hate to see stores who make special alox orders required to put their logo on the back every time.
...
Knives with company logos are a major part of the Victorinox business. Why should they hate that?
Blade etchings are everywhere, anodized logos only make victorinox.
Alox knives with anodized logos or names are what I most like to collect.
-
In my eagerness I forgot to add a swiss army knight pokerchip :facepalm:
But that will have to wait until I order my 2nd one I suppose :angel:
Doh! :facepalm:
Me, too! Well, come Nov 19th, when I order my second one, I'll add in a poker chip. :whistle:
-
34 sold already, nice! :2tu:
Thank you Douglas and Def for making this happen :hatsoff:
I think we've sold about 45 now. :climber: Get 'em while they're hot.
-
Any remaining stock will be sold the 19th to the peeps who want more then 1 :D
-
Any remaining stock will be sold the 19th to the peeps who want more then 1 :D
Seems only fair to wait until the 19th to order a second. Assuming any are left at that point.....
-
Any remaining stock will be sold the 19th to the peeps who want more then 1 :D
Seems only fair to wait until the 19th to order a second. Assuming any are left at that point.....
45 in 24 hours...
Good luck with that :rofl:
-
Thanks to Def and Doug for putting this together! :cheers: :cheers:
-
Thanks to Def and Doug for putting this together! :cheers: :cheers:
+1
-
Thanks Douglas and Def for doing this! I’m hoping this is super successful and MTO does more colors :drool:
Sent from my iPhone using Tapatalk
-
BREAKING NEWS
Due to a glitch in the software the discount has not been applied to some orders and I can't figure out why some people are getting it and some aren't. Since I can't figure out the cause, I can't fix it, so I have manually adjusted the price. The price you see now is the same as what the price with the discount ended up being, only now there's no extra screwing around.
Don't bother looking for a discount code, it is already reflected in the price. :pok:
Def
-
Never mind...
-
I am confused now. Not complaining a, just confused.
Here is a screenshot of when I placed my order...
(https://uploads.tapatalk-cdn.com/20171105/807d4f44c786473a9f86da34702e15eb.jpg)
And now what it shows if I were to order another...
(https://uploads.tapatalk-cdn.com/20171105/7a898f74f4a75edcc609ff7712bd4492.jpg)
What am I missing?
Sent from my iPhone using Tapatalk
For some reason the store software is still applying the discount although it should not be.
I have PM'ed Grant and I'm certain he is already on it.
Give him a little bit and I'm certain it will get fixed
-
I am confused now. Not complaining a, just confused.
Here is a screenshot of when I placed my order...
(https://uploads.tapatalk-cdn.com/20171105/807d4f44c786473a9f86da34702e15eb.jpg)
And now what it shows if I were to order another...
(https://uploads.tapatalk-cdn.com/20171105/7a898f74f4a75edcc609ff7712bd4492.jpg)
What am I missing?
Sent from my iPhone using Tapatalk
For some reason the store software is still applying the discount although it should not be.
I have PM'ed Grant and I'm certain he is already on it.
Give him a little bit and I'm certain it will get fixed
No, I just realized the first screenshot had the amounts in Canadian dollars.
Sent from my iPhone using Tapatalk
-
How much is the SAK supposed to be, in CA money?
Sent from my iPhone using Tapatalk
-
How much is the SAK supposed to be, in CA money?
Sent from my iPhone using Tapatalk
It should be $73.99 CAN, which should work out to roughly $55 US. As I am in Canada and have it set up to work with Canada Post the site defaults to Canadian dollars.
If you aren't getting something resembling $73.99 CAN or $55 US (please allow for fluctuation) then refresh the page using CTRL + Refresh. It is changed now.
Def
-
How much is the SAK supposed to be, in CA money?
Sent from my iPhone using Tapatalk
It should be $73.99 CAN, which should work out to roughly $55 US. As I am in Canada and have it set up to work with Canada Post the site defaults to Canadian dollars.
If you aren't getting something resembling $73.99 CAN or $55 US (please allow for fluctuation) then refresh the page using CTRL + Refresh. It is changed now.
Def
This is what I was charged, in US dollars. Is this correct? I had set the site to USD but it may have reverted.
(https://uploads.tapatalk-cdn.com/20171105/045c01622b305f6a873473ec9dd2a97f.jpg)
Sent from my iPhone using Tapatalk
-
Yes, that should be correct. The knife is (about) $55, plus shipping worka out to just over $60.... which is what it looks like you were charged.
Def
-
Yes, that should be correct. The knife is (about) $55, plus shipping worka out to just over $60.... which is what it looks like you were charged.
Def
Ok, sounds good then!
Sent from my iPhone using Tapatalk
-
Sweet SAK. Couldn't resist a customized MTO SAK. Thanks to Douglas for making this happen :salute:
Proud SAKMC member :)
-
Anyone knows when these will be produced?
-
For those of you that want to engrave the plates, I would strongly suggest you find someone who does laser engraving as the anodizing can chip with a standard engraver. It would be terrible to try and improve one of these and end up with red flakes everywhere! :ahhh
Def
Can anyone post a laser engraved alox SAK? :think:
-
.
.
(https://uploads.tapatalk-cdn.com/20171104/8ca9cd1ef28505d5254e7f6c5b29fc3c.jpg)
:rofl: :tu: :like:
-
For those of you that want to engrave the plates, I would strongly suggest you find someone who does laser engraving as the anodizing can chip with a standard engraver. It would be terrible to try and improve one of these and end up with red flakes everywhere! :ahhh
Def
Can anyone post a laser engraved alox SAK? :think:
Jaya man did some. :think:
-
For those of you that want to engrave the plates, I would strongly suggest you find someone who does laser engraving as the anodizing can chip with a standard engraver. It would be terrible to try and improve one of these and end up with red flakes everywhere! :ahhh
Def
Can anyone post a laser engraved alox SAK? :think:
Jaya man did some. :think:
Was that laser engraved? :think:
-
For those of you that want to engrave the plates, I would strongly suggest you find someone who does laser engraving as the anodizing can chip with a standard engraver. It would be terrible to try and improve one of these and end up with red flakes everywhere! :ahhh
Def
Can anyone post a laser engraved alox SAK? :think:
Jaya man did some. :think:
Was that laser engraved? :think:
J-man's Starwars laser engraved alox starts at post 12 in this thread https://forum.multitool.org/index.php/topic,74468.0.html
-
For those of you that want to engrave the plates, I would strongly suggest you find someone who does laser engraving as the anodizing can chip with a standard engraver. It would be terrible to try and improve one of these and end up with red flakes everywhere! :ahhh
Def
Can anyone post a laser engraved alox SAK? :think:
Jaya man did some. :think:
Was that laser engraved? :think:
J-man's Starwars laser engraved alox starts at post 12 in this thread https://forum.multitool.org/index.php/topic,74468.0.html
Ah yes. Thank you!
-
For those of you that want to engrave the plates, I would strongly suggest you find someone who does laser engraving as the anodizing can chip with a standard engraver. It would be terrible to try and improve one of these and end up with red flakes everywhere! :ahhh
Def
Can anyone post a laser engraved alox SAK? :think:
Jaya man did some. :think:
Was that laser engraved? :think:
J-man's Starwars laser engraved alox starts at post 12 in this thread https://forum.multitool.org/index.php/topic,74468.0.html
Ah yes. Thank you!
So are you guys over there close to figuring out how many will be on your group order? Just curious, hoping to see this be a record sell out for MTO and it seems to have slown way down. Need all the help we can get. :pok: :pok: :climber:
-
So if we don’t sell 100, is the order cancelled?
Also, are we being charged now or when the SAKs actually are orders or come in?
Just curious...
Sent from my iPhone using Tapatalk
-
We do not have to sell all 100 to place the order.
Just don't want to see Grant/Def/MTo stuck with a lot of unsold inventory. The longer we take the lower the enthusiasm. The lower the enthusiam the fewer sales and the more Grant is stuck with.
This is a preorder and will be charged when the preorder is placed as a means to keep MTo and or Grant specificaly from having to put thousands up front out of his own personal pocket. Vic will not start production on a special order like this with out prepayment.
I understand and unfortunately after having been in business have to agree with their policy. It is the only way they have of protectlng their business, employees, and us thier customers from the unscrupulous components with in our world. Another reason for prepayment is Vic' will give a better price for cash up front. It just takes all the risk out for them.
I hope every one understands and is also in agreement, and I want to apologise for any difficulties any may have experianced during this process.
I think this started off with far more furver than we had expected. If given the oportunity to do some thing like this again I know I personaly will be better prepaired.
Thanks every one for all your support and lets keep this thing rolling
-
All sounds great! Thanks for all the info and the “legwork” you and Grant have done!
MT.O special or not, that gorgeous RED PX will replace my current PX as my EDC SAKMC!!!! Can’t wait!!!
Sent from my iPhone using Tapatalk
-
From my perspective, it seems to be going fairly well. :salute: Any idea on how many pre-ordered units we have so far?
I expect we'll get more pre-orders over the next week or so. I noticed that the "Are you Serious" thread slowly built momentum over time. I suspect we'll see the same here as less frequent visitors notice this thread. (But let's keep it up at the top of the front page!)
It's a great concept using a great SAK. Build it and they will come. I've held off ordering a second so as to let other members jump in on this, but will try to order a second toward the end of the pre-order period. Give it a little time to come to fruition. :tu:
-
We do not have to sell all 100 to place the order.
Just don't want to see Grant/Def/MTo stuck with a lot of unsold inventory. The longer we take the lower the enthusiasm. The lower the enthusiam the fewer sales and the more Grant is stuck with.
This is a preorder and will be charged when the preorder is placed as a means to keep MTo and or Grant specificaly from having to put thousands up front out of his own personal pocket. Vic will not start production on a special order like this with out prepayment.
I understand and unfortunately after having been in business have to agree with their policy. It is the only way they have of protectlng their business, employees, and us thier customers from the unscrupulous components with in our world. Another reason for prepayment is Vic' will give a better price for cash up front. It just takes all the risk out for them.
I hope every one understands and is also in agreement, and I want to apologise for any difficulties any may have experianced during this process.
I think this started off with far more furver than we had expected. If given the oportunity to do some thing like this again I know I personaly will be better prepaired.
Thanks every one for all your support and lets keep this thing rolling
The unsold knives are blocked money for Grant, I understand that.
But I think when the knives are in circulation and photos of them coming in the social media,
the unsold knives will sell out quickly.
100 pieces is the minimal edition and also interesting for collectors *.
I also had some limited editions produced at victorinox and knows how it works.
* Maybe interesting to know: Is it clear if it stays with these 100 pieces?
-
From my perspective, it seems to be going fairly well. :salute: Any idea on how many pre-ordered units we have so far?
I expect we'll get more pre-orders over the next week or so. I noticed that the "Are you Serious" thread slowly built momentum over time. I suspect we'll see the same here as less frequent visitors notice this thread. (But let's keep it up at the top of the front page!)
It's a great concept using a great SAK. Build it and they will come. I've held off ordering a second so as to let other members jump in on this, but will try to order a second toward the end of the pre-order period. Give it a little time to come to fruition. :tu:
Thanks Nix for keeping me grounded. :hatsoff: I'm impatient just ask my Wife. :whistle:
At last check a few min ago we show to have pre-sold 46 :tu: so that leaves 54 to go. :pok: :pok: Still a big chunck of money for Grant/ Mto to have to front. I would like to see that be a small as possible.
I want to see a lot more special projects to come. :drool: :drool:
They can only happen if we can keep them for being an expense on MTo. Special projects like this should always be an investment never an expense.
Considering this was anounced less than 3 days ago it is realy great. :tu: :tu:
I just don't want to loose the momentum, if you know what I mean...
-
We do not have to sell all 100 to place the order.
Just don't want to see Grant/Def/MTo stuck with a lot of unsold inventory. The longer we take the lower the enthusiasm. The lower the enthusiam the fewer sales and the more Grant is stuck with.
This is a preorder and will be charged when the preorder is placed as a means to keep MTo and or Grant specificaly from having to put thousands up front out of his own personal pocket. Vic will not start production on a special order like this with out prepayment.
I understand and unfortunately after having been in business have to agree with their policy. It is the only way they have of protectlng their business, employees, and us thier customers from the unscrupulous components with in our world. Another reason for prepayment is Vic' will give a better price for cash up front. It just takes all the risk out for them.
I hope every one understands and is also in agreement, and I want to apologise for any difficulties any may have experianced during this process.
I think this started off with far more furver than we had expected. If given the oportunity to do some thing like this again I know I personaly will be better prepaired.
Thanks every one for all your support and lets keep this thing rolling
The unsold knives are blocked money for Grant, I understand that.
But I think when the knives are in circulation and photos of them coming in the social media,
the unsold knives will sell out quickly.
100 pieces is the minimal edition and also interesting for collectors *.
I also had some limited editions produced at victorinox and knows how it works.
* Maybe interesting to know: Is it clear if it stays with these 100 pieces?
AT THIS TIME, there are no plans to extend the production past the original 100.
If there is enough interest I might see if we could get a new special project going. With Grant's blessing of course.
-
Sneider,
Got some pictures of your limited edition run/runs?
-
I'm finally in +1
:tu:
-
There will NOT be more than 100 of this knife made. The agreement with Victorinox has been written and I don't feel that additional knives would benefit anyone.
This however doesn't mean that we won't ever do this again. So far this has been successful enough that I would strongly consider doing another run in the future, but those will not be Multitool Of They Year 2016 knives. This one has been long enough in the making, and I see no benefit to dragging it out any further. :P
We are already on the hook for 100 knives, so the fewer that sell, the more I have to fork out, and the more I have to sit on. The order is placed, and this is happening, so don't worry about it falling through. Those of you who have actually sent in money will get a knife. And, in fact, we can go one better, because each knife is coming in a special presentation box, like the one pictured below! :D
Def
-
And, in fact, we can go one better, because each knife is coming in a special presentation box, like the one pictured below! :D
Def
:like: :tu: :like:
-
+1 :like:
Gee whiz, it's just begging to be a shelf queen now. :facepalm: :D
Seriously that box is awesome!!! :woohoo: :woohoo:
-
Ya're making it dad burned hard to buy this as a user.............sigh.........payday so slow......!. :ahhh :think: :gimme: :like:
-
Oooohhh it comes with a cool box!
Sent from my iPhone using Tapatalk
-
There will NOT be more than 100 of this knife made. The agreement with Victorinox has been written and I don't feel that additional knives would benefit anyone.
This however doesn't mean that we won't ever do this again. So far this has been successful enough that I would strongly consider doing another run in the future, but those will not be Multitool Of They Year 2016 knives. This one has been long enough in the making, and I see no benefit to dragging it out any further.
We are already on the hook for 100 knives, so the fewer that sell, the more I have to fork out, and the more I have to sit on. The order is placed, and this is happening, so don't worry about it falling through. Those of you who have actually sent in money will get a knife. And, in fact, we can go one better, because each knife is coming in a special presentation box, like the one pictured below! :D
Def
Noice
Proud SAKMC member :)
-
When will we see our MTO PX in this list? :tu:
http://swissknives.info/more-alox-special-run-overview/
-
Ya're making it dad burned hard to buy this as a user.............sigh.........payday so slow......!. :ahhh :think: :gimme: :like:
This.. ^^^
-
Want one as a user?
But 2!
I was wondering already if it came with a box/certificate.
-
Want one as a user?
But 2!
I was wondering already if it came with a box/certificate.
but, but...
-
Sneider,
Got some pictures of your limited edition run/runs?
These were my first two: :salute:
(https://up.picr.de/21391430ci.jpg)
-
If purchases slow down enough to not sell out before Nov 20, I will buy another.
I have no need for boxes, though... that just increases the chance of being slowed down in customs
as for doing other limited runs...If anyone ever does a red alox bantam I will buy 5-10 in a heartbeat.
-Tom
-
Want one as a user?
But 2!
I was wondering already if it came with a box/certificate.
but, but...
Buy.
I really need to stop with typing within 5min after waking up...
-
Want one as a user?
But 2!
I was wondering already if it came with a box/certificate.
but, but...
Buy.
I really need to stop with typing within 5min after waking up...
:rofl: I was really referring to the thought of having to buy 2 PX's... one for the shelf and one for the pocket. :D :cheers:
-
To tide us over while we wait
(https://uploads.tapatalk-cdn.com/20171106/f492c902fce456f90436c42f9186e723.jpg)
-
If purchases slow down enough to not sell out before Nov 20, I will buy another.
I have no need for boxes, though... that just increases the chance of being slowed down in customs
as for doing other limited runs...If anyone ever does a red alox bantam I will buy 5-10 in a heartbeat.
-Tom
I don't have any Bantams, but there is a nice variety of ALOX in The Multitool.org Store (https://store.multitool.org/search?controller=search&s=alox). :pok:
Def
-
Hi All,
First of all I would like to say personal "Thanks!" to all persons who did this project! :cheers:
And I need some consultation regarding shipping. I'm living in Ukraine, but very often I'm using a special service which allows to order some goods to US address (in NJ state) and than - forward parcels directly to Ukraine (very helpfull in case if some sellers doesn't ship internationally).
It was a short introduction, now it's time for asking :)
I have three possible shipping options in MTO store. Which kind of shipping is better (and safe)?
- Canada Post (Small Packet USA Air (less than 1kg)) Small Packet USA Air (less than 1kg) $5.49 tax excl.
- Canada Post (Tracked Packet USA) Tracked Packet USA $10.54 tax excl.
- Canada Post (Expedited Parcel USA) Expedited Parcel USA $13.58 tax excl.
Thanks,
Alex
-
I do not recall a package ever getting lost when I have sent it airmail, and I send things all over the world. Also, I am the one that is sending it, and I am happy to send direct to Ukraine if you prefer.
Unlike the US, Canada is on the same planet as the rest of the world, and I don't have any problems shipping to anywhere. :D
That having been said, I won't be responsible for loss or damage of any packages that are not tracked and insured, and the prices you quoted does not include insurance. If you want insurance, I will be happy to provide a quote for that as well.
Entirely up to you.
Def
-
49 left??
Sent from my iPhone using Tapatalk
-
49 left??
Sent from my iPhone using Tapatalk
That's right we've sold 51 in less than 3 days. Yes thay're going fast so if you're undecided it's time to get off the fence an place that order!! :pok: :pok:
-
To tide us over while we wait
(https://uploads.tapatalk-cdn.com/20171106/f492c902fce456f90436c42f9186e723.jpg)
:drool: :drool: :drool: :drool: :drool: :drool:
-
Sneider,
Got some pictures of your limited edition run/runs?
These were my first two: :salute:
(https://up.picr.de/21391430ci.jpg)
Those are gorgeous. :drool: :drool:
:like:
-
shipping fees are killing me :facepalm:
-
Order placed :tu:
-
shipping fees are killing me :facepalm:
Me too.... :P
Def
-
shipping fees are killing me :facepalm:
Me too.... :P
Def
27.47€ for shipping :duel:
Too bad it will cross the Atlantic ocean twice :facepalm:
I'm going to order, but god, my poor credit card :pok:
-
shipping fees are killing me :facepalm:
Me too.... :P
Def
27.47€ for shipping :duel:
Too bad it will cross the Atlantic ocean twice :facepalm:
I'm going to order, but god, my poor credit card :pok:
We hope your card recovers (http://www.sherv.net/cm/emoticons/sick/sick.gif) (http://www.sherv.net/) quickly. It's sacrifice :pommel: for the cause is greatly appreciated. :salute:
-
Tracked postage was cheaper then what Dutch_Tooler had to pay for the tracking of his Mini tool. And that was only 1 country from here, while the PX will travel half the world. WTF?! :bnghd:
-
I've not bothered woth tracked & insured. This will be my 10th MTo store order and every one of them has made it to me so far without problem. Occassionally the friendly postal service here want a small fee to handle the package, bit it's only £8. It's only happened twice though.
-
I usually try to minimize Her Majesty's interest in your stuff by listing things with a value of $35.00 or less. My belief (at the risk of going political!) is that until the various governments of the planet learn to be responsible with our money, they should be kept on a strict budget, just like the rest of us. Because of this, I have little interest in allowing them any excuse to take more of our hard earned pesos, kopecs, galactic credits, dollars, pounds, Euros, rubles or duckets than absolutely necessary.
Def
-
Don't forget quatloos and gold-pressed latinum. :whistle:
-
I usually try to minimize Her Majesty's interest in your stuff by listing things with a value of $35.00 or less. My belief (at the risk of going political!) is that until the various governments of the planet learn to be responsible with our money, they should be kept on a strict budget, just like the rest of us. Because of this, I have little interest in allowing them any excuse to take more of our hard earned pesos, kopecs, galactic credits, dollars, pounds, Euros, rubles or duckets than absolutely necessary.
Def
Oh yeah I forgot to mention that. That is the reason I don't get hit with import duty. Thank you for that, it's much appreciated :cheers:
I dunno why on occasion they have added a handling fee. It's very hit and miss as to when they apply it. Even with it happening occassionally, ordering from you is still a good deal compared to over here. The Gerber CD was a good example. When they had them on sale here they were still £16 more expensive than buying from you and they didn't come with a bit kit here.
-
It's actually kind of funny- whenever I post something for sale I get messages from US based members asking why stuff is so expensive, and I get messages from people all over the rest of the world thanking me for offering it so cheaply! :D
I always figured that by the time I paid the import taxes to me, the extra shipping etc that I couldn't compete with the US based dealers, but as most of them won't ship internationally, I figured it was worth a go. So far I'd say we aren't doing too badly in the MTO Store, both to the US and the rest of the world, so I must be doing something right. :D
Def
-
It's actually kind of funny- whenever I post something for sale I get messages from US based members asking why stuff is so expensive, and I get messages from people all over the rest of the world thanking me for offering it so cheaply! :D
I always figured that by the time I paid the import taxes to me, the extra shipping etc that I couldn't compete with the US based dealers, but as most of them won't ship internationally, I figured it was worth a go. So far I'd say we aren't doing too badly in the MTO Store, both to the US and the rest of the world, so I must be doing something right. :D
Def
You are doing a wonderful service for us all. Thank you for that! :tu:
-
Members here are worth every bit of effort I put into it... and a heck of a lot more.
We have always looked after our own here, and I don't ever plan to let that change!
Def
-
:salute:
Thanks, Def.
-
:salute:
Thanks, Def.
Yeah, what he said. :climber:
-
:salute:
Thanks, Def.
Yeah, what he said. :climber:
Yeah, what they said :climber: :tu: :hatsoff:
-
Thanks for doing this, Def. Just placed my order :cheers:
-
Thanks for doing this, Def. Just placed my order :cheers:
:woohoo: :tu:
-
To tide us over while we wait
(https://uploads.tapatalk-cdn.com/20171106/f492c902fce456f90436c42f9186e723.jpg)
If they are going to be this Red and not the brighter red in the sample pic I may just have to get one :facepalm:
-
To tide us over while we wait
(https://uploads.tapatalk-cdn.com/20171106/f492c902fce456f90436c42f9186e723.jpg)
If they are going to be this Red and not the brighter red in the sample pic I may just have to get one :facepalm:
Is there any other shade of SAK alox red? Other than the pink I see :think:
-
To tide us over while we wait
(https://uploads.tapatalk-cdn.com/20171106/f492c902fce456f90436c42f9186e723.jpg)
If they are going to be this Red and not the brighter red in the sample pic I may just have to get one :facepalm:
Is there any other shade of SAK alox red? Other than the pink I see :think:
I didn't think so. But the sample pics a rendering or cad drawing. The lcas is a real product photo. But I'd assume with high probability that the red you get will be exactly what your expecting :salute:
-
To tide us over while we wait
(https://uploads.tapatalk-cdn.com/20171106/f492c902fce456f90436c42f9186e723.jpg)
If they are going to be this Red and not the brighter red in the sample pic I may just have to get one :facepalm:
Is there any other shade of SAK alox red? Other than the pink I see :think:
I didn't think so. But the sample pics a rendering or cad drawing. The lcas is a real product photo. But I'd assume with high probability that the red you get will be exactly what your expecting :salute:
The reason I posted an actual red PX as the rendering doesn't reflect the actual colors I see, plus the different color gamut each of our screen has makes it appear a different shade of red
s2
-
The reason l commented is that I've seen a couple of different shades of reds on the old cross Pioneers and Farmers that have passed through my hands.
-
Members here are worth every bit of effort I put into it... and a heck of a lot more.
We have always looked after our own here, and I don't ever plan to let that change!
Def
I promise you'll get my order this (european) evening
PX, along with a SAK badge, and a Wenger Traveler (for good measure)
-
I usually try to minimize Her Majesty's interest in your stuff by listing things with a value of $35.00 or less. My belief (at the risk of going political!) is that until the various governments of the planet learn to be responsible with our money, they should be kept on a strict budget, just like the rest of us. Because of this, I have little interest in allowing them any excuse to take more of our hard earned pesos, kopecs, galactic credits, dollars, pounds, Euros, rubles or duckets than absolutely necessary.
Def
:hatsoff:
Just mentioning that for most European Union countries (including the Netherlands) they start charging import fees at 22 euro and above. Just saying :whistle:
-
I've run into customs issues and label everything $10 these days
-
I usually try to minimize Her Majesty's interest in your stuff by listing things with a value of $35.00 or less. My belief (at the risk of going political!) is that until the various governments of the planet learn to be responsible with our money, they should be kept on a strict budget, just like the rest of us. Because of this, I have little interest in allowing them any excuse to take more of our hard earned pesos, kopecs, galactic credits, dollars, pounds, Euros, rubles or duckets than absolutely necessary.
Def
:hatsoff:
Just mentioning that for most European Union countries (including the Netherlands) they start charging import fees at 22 euro and above. Just saying :whistle:
According to Dutch Customs rules, if you import an item of $ 10 and P&H is $ 25 (total is $ 35, which is about € 27), you pay 21% import tax over the total amount! Yes, they let you pay import tax over P&H costs.
-
I usually try to minimize Her Majesty's interest in your stuff by listing things with a value of $35.00 or less. My belief (at the risk of going political!) is that until the various governments of the planet learn to be responsible with our money, they should be kept on a strict budget, just like the rest of us. Because of this, I have little interest in allowing them any excuse to take more of our hard earned pesos, kopecs, galactic credits, dollars, pounds, Euros, rubles or duckets than absolutely necessary.
Def
:hatsoff:
Just mentioning that for most European Union countries (including the Netherlands) they start charging import fees at 22 euro and above. Just saying :whistle:
According to Dutch Customs rules, if you import an item of $ 10 and P&H is $ 25 (total is $ 35, which is about € 27), you pay 21% import tax over the total amount! Yes, they let you pay import tax over P&H costs.
No, that's not entirely true.
If the value of the item itself is less than 22 euro, you don't have to pay any taxes.
If the value of the item itself is 22 euro or more, then you will be charged taxes over both the value of the item and the shipping costs.
-
We get ripped off here. That's the only conclusion.
-
No, that's not entirely true.
If the value of the item itself is less than 22 euro, you don't have to pay any taxes.
If the value of the item itself is 22 euro or more, then you will be charged taxes over both the value of the item and the shipping costs.
Unbelievable - How can you possibly be charged tax on a shipping cost - :twak: There is no precedent, rationale or possible justification for that ???
I hope this is not getting political - But .........
I always thought the Dutch were one of the most sane, rational, intelligent races on this planet - I have just changed my mind
- Well at least regarding the revenue department of their government.
-
No, that's not entirely true.
If the value of the item itself is less than 22 euro, you don't have to pay any taxes.
If the value of the item itself is 22 euro or more, then you will be charged taxes over both the value of the item and the shipping costs.
Unbelievable - How can you possibly be charged tax on a shipping cost - :twak: There is no precedent, rationale or possible justification for that ???
I hope this is not getting political - But .........
I always thought the Dutch were one of the most sane, rational, intelligent races on this planet - I have just changed my mind
- Well at least regarding the revenue department of their government.
Well, our government sure is intelligent... when it comes to thinking of ways to rip off their population :facepalm:
-
No, that's not entirely true.
If the value of the item itself is less than 22 euro, you don't have to pay any taxes.
If the value of the item itself is 22 euro or more, then you will be charged taxes over both the value of the item and the shipping costs.
Unbelievable - How can you possibly be charged tax on a shipping cost - :twak: There is no precedent, rationale or possible justification for that ???
I hope this is not getting political - But .........
I always thought the Dutch were one of the most sane, rational, intelligent races on this planet - I have just changed my mind
- Well at least regarding the revenue department of their government.
Well, our government sure is intelligent... when it comes to thinking of ways to rip off their population :facepalm:
So if I put a €0.50 stamp in a big box and send it via VIP overnight registered signature-required super expensive delivery that costs, say... €40, I could be charged a hefty tax on the stamp? :rofl:
-
You guys live on easy street. :twak:
In my neck of the woods the threshhold sum value of item + shipping must be less than EUR10.75 in order to avoid getting tariff-stomped.
If the value of your item + shipping exceeds the threshhold value then you will be made to pay a EUR20 customs fee and +25% VAT of the value of item + shipping.
And if they suspect that the customs form value is lower than the market value, you will be asked to provide a receipt + a bank statement documenting the purchase.
oh well :)
-
No, that's not entirely true.
If the value of the item itself is less than 22 euro, you don't have to pay any taxes.
If the value of the item itself is 22 euro or more, then you will be charged taxes over both the value of the item and the shipping costs.
Unbelievable - How can you possibly be charged tax on a shipping cost - :twak: There is no precedent, rationale or possible justification for that ???
I hope this is not getting political - But .........
I always thought the Dutch were one of the most sane, rational, intelligent races on this planet - I have just changed my mind
- Well at least regarding the revenue department of their government.
Well, our government sure is intelligent... when it comes to thinking of ways to rip off their population :facepalm:
So if I put a €0.50 stamp in a big box and send it via VIP overnight registered signature-required super expensive delivery that costs, say... €40, I could be charged a hefty tax on the stamp? :rofl:
No, because then the item itself is under 22 euro so there will be no import charges. But if you send something that's worth exactly 22 euro (because only items valued under 22 euro are tax free), and the shipping cost for your registered insured parcel is 20 euro, you will be taxed 21% over 42 euro. And let's not forget the handling fee for handling your item at customs, which in most cases is a flat fee of 13 euro :facepalm:
So importing something that's worth 22 euro, with 20 euro shipping cost, will cost you an additional 22 euro in import taxes and handling fee.
edit: where I refer to import taxes, I actually mean VAT, just to be precise ::)
-
Well.... if 22 Euros is the cutoff, then I am just going over the top. From xe.com right now:
35 CAD =23.7197EUR
Canadian Dollar
1 CAD = 0.677705 EUR ↔ Euro 1 EUR = 1.47557 CAD
I guess I will have to change my limit to $30 CDN then!
Def
-
From 2021 on the EU is planning a reform of the import tax system to counter the (mainly chinese) VAT fraud.
There will be no more exemption limit (the 22 EUR) and for deliveries under 150 EUR, the seller is responsible for the tax payment regularly.
-
From 2021 on the EU is planning a reform of the import tax system to counter the (mainly chinese) VAT fraud.
There will be no more exemption limit (the 22 EUR) and for deliveries under 150 EUR, the seller is responsible for the tax payment regularly.
Oh man... they just love paperwork, don't they :wait:
Let's hope those reform plans strand in the bureaucratic paperwork somewhere before 2021.
-
hmm, wouldn't mind ordering this... except my country - Malaysia - isn't listed.
-
hmm, wouldn't mind ordering this... except my country - Malaysia - isn't listed.
pm def and let him know. He'll sort you out. He's going to be away for a few days so you won't get an immediate answer. :cheers:
-
Just ordered one :tu:
-
Just ordered one :tu:
Yehey! :cheers:
-
58 sold so far :tu:
Not too shabby :like:
-
I'm hoping there's still one left available by the 19th...... >:D :gimme:
-
I'm hoping there's still one left available by the 19th...... >:D :gimme:
Better safe then sorry and order now :pok:
-
I'm hoping there's still one left available by the 19th...... >:D :gimme:
Better safe then sorry and order now :pok:
I'm tempted, but don't want to be greedy at the expense of other Knights. I have a feeling some other forum members will stumble on to this deal in the next few days. While I'd like to have two (2)--a user and a shelf queen--I'll hold off until everyone has had a shot. Within reason. >:D (And it'd go over better with Mrs Nix if I wait until after the mid-month paycheck. :-\)
:SAKnight: :cheers:
-
I'm hoping there's still one left available by the 19th...... >:D :gimme:
Better safe then sorry and order now :pok:
I'm tempted, but don't want to be greedy at the expense of other Knights. I have a feeling some other forum members will stumble on to this deal in the next few days. While I'd like to have two (2)--a user and a shelf queen--I'll hold off until everyone has had a shot. Within reason. >:D (And it'd go over better with Mrs Nix if I wait until after the mid-month paycheck. :-\)
:SAKnight: :cheers:
Keep track here so you can order before we hit 100...
-
So they ship from CH on the 20th? Sorry if this was awlready stated. :cheers:
-
Ordered. :salute:
-
I'm hoping there's still one left available by the 19th...... >:D :gimme:
Better safe then sorry and order now :pok:
I'm tempted, but don't want to be greedy at the expense of other Knights. I have a feeling some other forum members will stumble on to this deal in the next few days. While I'd like to have two (2)--a user and a shelf queen--I'll hold off until everyone has had a shot. Within reason. >:D (And it'd go over better with Mrs Nix if I wait until after the mid-month paycheck. :-\)
:SAKnight: :cheers:
Oh we were supposed to hold off getting 2? Oopsie :whistle:
-
Oh we were supposed to hold off getting 2? Oopsie :whistle:
:facepalm: :rofl:
No, not really, just my idea to wait for a bit. I was feeling confident that there would be a few left over........we'll see if the knife Gods are feeling generous towards me. :D
-
So they ship from CH on the 20th? Sorry if this was awlready stated. :cheers:
I wish that was the case. As I understand it they will ship hopefully Mid December. They are still in production and will ship to the MTo Store / Grant as soon as complete. Grant is currently traveling but said he would check in on things as often as possible. I'm certain he will correct me if need be. :facepalm: Just hope it's not needed or if so, sooner than I understood.
I too am eagerly anticipating putting my grubby paws on the real thing. :drool: :drool: :drool: :drool: It will free up a lot of time when I can finaley stop mopping up the floor under my computer. :whistle:
-
Ramen noodles & water diet for next 3 months...............sigh......... just got a Skipper, ordered a pocket sharpener , ordered a fieldmaster wonded warrior , ordered a champ wood scaled wonded warrior, & now this. I may never have a real honest food meal again............sigh.......... But I'll be well equipped for pocket knives............oh did I mention the Swiss tool I got............. :climber: :climber: :climber: :facepalm:
-
Knight has to do what a knight has to do....
>:D
-
Hey
I just placed my order .... Canadian Post shipping is crazy expensive
Does anyone from Oz Down Under want to buddy up on the shipping
I am sure Grant can combine shipping for the orders as required - even if they are already placed - Well hopefully you can Grant ???
I am happy to receive and post on to anyone in Oz from Sydney
I think it would be worth it as my shipping was $40 CND for basic and $60 tracked - Canadian dollars are almost the same as Ozzie
I thinking shipping within Australia would only be $7 - So we should save - Especially if there are more than a couple of recipients
I ordered a couple of other things - So we could split the postage by number of items - I went for tracked - If a fellow Ozzie did not want the split that component I am happy to cover it!
Let me know Ozzie mates
Probably best to use PMs - To save cluttering up this thread
-
Hey
I just placed my order .... Canadian Post shipping is crazy expensive
Does anyone from Oz Down Under want to buddy up on the shiping....
Let me know Ozzie mates
Probably best to use PMs - To save cluttering up this thread
If it keeps the thread on the top of the first page, CLUTTER IT UP>>>> :whistle:
-
bump
-
Just checked supply in the store and
WOW!
ONLY 30 LEFT>
:tu:
KEEP IT UP!!
YOU GUYS ARE
AMAZING!! :salute:
-
:viking:
-
Just checked supply in the store and
WOW!
ONLY 30 LEFT>
:tu:
KEEP IT UP!!
YOU GUYS ARE
AMAZING!! :salute:
Well you coul help ya know............I tried to teach him right................sigh............Douglas for crimany sakes boy, but the link to them in here so they don't have to hunt............. :pok: :rant: :megaslap: :bnghd: :bnghd:
-
:viking:
29 LEFT!
NIX,
you might want to reconsider just how Valiant a SAKnight you want to be... :whistle:
-
Just checked supply in the store and
WOW!
ONLY 30 LEFT>
:tu:
KEEP IT UP!!
YOU GUYS ARE
AMAZING!! :salute:
Well you coul help ya know............I tried to teach him right................sigh............Douglas for crimany sakes boy, but the link to them in here so they don't have to hunt............. :pok: :rant: :megaslap: :bnghd: :bnghd:
Here it is again...
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html#product-details
Yall do see the abruse I take, Right?
-
Just checked supply in the store and
WOW!
ONLY 30 LEFT>
:tu:
KEEP IT UP!!
YOU GUYS ARE
AMAZING!! :salute:
Well you coul help ya know............I tried to teach him right................sigh............Douglas for crimany sakes boy, but the link to them in here so they don't have to hunt............. :pok: :rant: :megaslap: :bnghd: :bnghd:
Here it is again...
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html#product-details
:like: :like: :like: :multi:
-
Just ordered mine. That brought it down to 29. :tu:
-
Just ordered mine. That brought it down to 29. :tu:
Another Good MAN SAknight! :salute:
-
Hey
Apologies if this has been covered before - I am disappointed the spec of this knife is not as published in the 'results/serious' thread
I was looking forward to MTO 2016 on the scale plate - and am not that bothered, and a bit worried, about the durability of the laser etching on the blade
I assume that this is the spec now and it cannot be changed back to what we agreed? ???
Can someone please tell me why this changed ?
-
I unfortunately can not exactly say why the change came about, but I do know this is what was agreed to with Victorinox. I also was a bit surprised when I first saw the blade etching and no engraving on the scale plate. At the point of seeing the proof, plans with Victorinox would have had to go back to the drawing board and most likely created and excessive delay so I felt it best not to rock the boat. If there is any heat to be taken for not pushing the engraving I gladly will accept it. From other laser blade engravings and Victorinox's quality standard I would expect it to be very durable. I unfortunately can not make any specific guarantees for any given person as it would be subject to the treatment of the blade by that individual.
I hope no one is to disapointed or put off by the change. This has been so long in the making I personally am just excited it became a reality.
-
The etch went on the blade because there was too much to put on the plate. We have such an awesome logo, we wanted to make sure it was used.
The etch is lasered into the steel and will only come off when the steel is group down enough that it comes off. It is actually IN the steel, not on It, so it is as durable as the steel itself.
And yes, if folks want to double up on shipping or make other arrangements, I am very happy to do so. As said, I am out of town for a few days (12 hours of driving today, probably 5-6 again tomorrow :ahhh) so I may not answer things right away but I promise I will get to them ASAP.
I planned to place the order officially on the 20th, but I will be doing it sooner in hopes of getting these out ASAP.
Def
-
The etch went on the blade because there was too much to put on the plate. We have such an awesome logo, we wanted to make sure it was used.
The etch is lasered into the steel and will only come off when the steel is group down enough that it comes off. It is actually IN the steel, not on It, so it is as durable as the steel itself.
And yes, if folks want to double up on shipping or make other arrangements, I am very happy to do so. As said, I am out of town for a few days (12 hours of driving today, probably 5-6 again tomorrow :ahhh) so I may not answer things right away but I promise I will get to them ASAP.
I planned to place the order officially on the 20th, but I will be doing it sooner in hopes of getting these out ASAP.
Def
:like: :like: :like: :like: :climber:
-
The etch went on the blade because there was too much to put on the plate. We have such an awesome logo, we wanted to make sure it was used.
The etch is lasered into the steel and will only come off when the steel is group down enough that it comes off. It is actually IN the steel, not on It, so it is as durable as the steel itself.
And yes, if folks want to double up on shipping or make other arrangements, I am very happy to do so. As said, I am out of town for a few days (12 hours of driving today, probably 5-6 again tomorrow :ahhh) so I may not answer things right away but I promise I will get to them ASAP.
I planned to place the order officially on the 20th, but I will be doing it sooner in hopes of getting these out ASAP.
Def
THANKS GRANT, for the OFFICIAL response. :tu:
-
The etch went on the blade because there was too much to put on the plate. We have such an awesome logo, we wanted to make sure it was used.
The etch is lasered into the steel and will only come off when the steel is group down enough that it comes off. It is actually IN the steel, not on It, so it is as durable as the steel itself.
And yes, if folks want to double up on shipping or make other arrangements, I am very happy to do so. As said, I am out of town for a few days (12 hours of driving today, probably 5-6 again tomorrow :ahhh ) so I may not answer things right away but I promise I will get to them ASAP.
I planned to place the order officially on the 20th, but I will be doing it sooner in hopes of getting these out ASAP.
Def
Im buying the MTO PX primarily because its an official MTO MT. But is it possible to make the whole logo a wee bit smaller? Its too big, IMHO. Maybe reduce it to 80%? It's not an advertising MT. Just my single opinion, though.
:)
-
The etch went on the blade because there was too much to put on the plate. We have such an awesome logo, we wanted to make sure it was used.
The etch is lasered into the steel and will only come off when the steel is group down enough that it comes off. It is actually IN the steel, not on It, so it is as durable as the steel itself.
And yes, if folks want to double up on shipping or make other arrangements, I am very happy to do so. As said, I am out of town for a few days (12 hours of driving today, probably 5-6 again tomorrow :ahhh ) so I may not answer things right away but I promise I will get to them ASAP.
I planned to place the order officially on the 20th, but I will be doing it sooner in hopes of getting these out ASAP.
Def
Im buying the MTO PX primarily because its an official MTO MT. But is it possible to make the whole logo a wee bit smaller? Its too big, IMHO. Maybe reduce it to 80%? It's not an advertising MT. Just my single opinion, though.
:)
Sir An0nemous...
:twak: :twak: :twak:
Where's your allegiance?
:twak:
-
The etch went on the blade because there was too much to put on the plate. We have such an awesome logo, we wanted to make sure it was used.
The etch is lasered into the steel and will only come off when the steel is group down enough that it comes off. It is actually IN the steel, not on It, so it is as durable as the steel itself.
And yes, if folks want to double up on shipping or make other arrangements, I am very happy to do so. As said, I am out of town for a few days (12 hours of driving today, probably 5-6 again tomorrow :ahhh ) so I may not answer things right away but I promise I will get to them ASAP.
I planned to place the order officially on the 20th, but I will be doing it sooner in hopes of getting these out ASAP.
Def
Im buying the MTO PX primarily because its an official MTO MT. But is it possible to make the whole logo a wee bit smaller? Its too big, IMHO. Maybe reduce it to 80%? It's not an advertising MT. Just my single opinion, though.
:)
Sir An0nemous...
:twak: :twak: :twak:
Where's your allegiance?
:twak:
Oh it's still in my heart, sir! But let's keep it in more classy size
-
The etch went on the blade because there was too much to put on the plate. We have such an awesome logo, we wanted to make sure it was used.
The etch is lasered into the steel and will only come off when the steel is group down enough that it comes off. It is actually IN the steel, not on It, so it is as durable as the steel itself.
And yes, if folks want to double up on shipping or make other arrangements, I am very happy to do so. As said, I am out of town for a few days (12 hours of driving today, probably 5-6 again tomorrow :ahhh ) so I may not answer things right away but I promise I will get to them ASAP.
I planned to place the order officially on the 20th, but I will be doing it sooner in hopes of getting these out ASAP.
Def
Im buying the MTO PX primarily because its an official MTO MT. But is it possible to make the whole logo a wee bit smaller? Its too big, IMHO. Maybe reduce it to 80%? It's not an advertising MT. Just my single opinion, though.
:)
Sir An0nemous...
:twak: :twak: :twak:
Where's your allegiance?
:twak:
Oh it's still in my heart, sir! But let's keep it in more classy size
I agree on that point, a smaller or maybe 'less obvious' logo could have nice too: people would have ask 'what's that logo?' And get an answer from us, which impacts the mind a lot more than seeing a bigger logo :-)
-
Just did a little history reserch on this project. It's been a wild ride. So here is the break down.
12-20-2016 Anouncement of the 2016 MT of the Year voting results. 262 total votes
http://multitool.org/news/multitool-org-multitool-of-the-year-2016
5-22-2017 Anouncement of the MTO 2016 Custom concept 1256 Views
https://forum.multitool.org/index.php/topic,72592.msg1500753.html#msg1500753
9-16-2017 Design Poll 936 views, 36 votes
https://forum.multitool.org/index.php/topic,73916.msg1554533.html#msg1554533
9-27-2016 Committment Poll 4424 views, 53 votes
https://forum.multitool.org/index.php/topic,74055.0.html
11-3-2017 PX Preorder is Anounced 3454 Views and counting, 71 of 100 sold as of this post
Pretty darn good!!!
Just NOT good enough we still have 29 unsold. Just kidd'n.
Your response to this project has truely been overwhelming and I thank each of you for your kind support.
My :hatsoff: to everyone.
NOW go SELL some MORE!! :whistle:
-
The etch went on the blade because there was too much to put on the plate. We have such an awesome logo, we wanted to make sure it was used.
The etch is lasered into the steel and will only come off when the steel is group down enough that it comes off. It is actually IN the steel, not on It, so it is as durable as the steel itself.
And yes, if folks want to double up on shipping or make other arrangements, I am very happy to do so. As said, I am out of town for a few days (12 hours of driving today, probably 5-6 again tomorrow :ahhh ) so I may not answer things right away but I promise I will get to them ASAP.
I planned to place the order officially on the 20th, but I will be doing it sooner in hopes of getting these out ASAP.
Def
Im buying the MTO PX primarily because its an official MTO MT. But is it possible to make the whole logo a wee bit smaller? Its too big, IMHO. Maybe reduce it to 80%? It's not an advertising MT. Just my single opinion, though.
:)
Sir An0nemous...
:twak: :twak: :twak:
Where's your allegiance?
:twak:
Oh it's still in my heart, sir! But let's keep it in more classy size (http://emoji.tapatalk-cdn.com/emoji16.png)
I agree on that point, a smaller or maybe 'less obvious' logo could have nice too: people would have ask 'what's that logo?' And get an answer from us, which impacts the mind a lot more than seeing a bigger logo :-)
Thanks. The current size shouts too much...? :think:
(https://uploads.tapatalk-cdn.com/20171108/b63659373c3edfec268240edd6339135.jpg)
-
The etch went on the blade because there was too much to put on the plate. We have such an awesome logo, we wanted to make sure it was used.
The etch is lasered into the steel and will only come off when the steel is group down enough that it comes off. It is actually IN the steel, not on It, so it is as durable as the steel itself.
And yes, if folks want to double up on shipping or make other arrangements, I am very happy to do so. As said, I am out of town for a few days (12 hours of driving today, probably 5-6 again tomorrow :ahhh ) so I may not answer things right away but I promise I will get to them ASAP.
I planned to place the order officially on the 20th, but I will be doing it sooner in hopes of getting these out ASAP.
Def
Im buying the MTO PX primarily because its an official MTO MT. But is it possible to make the whole logo a wee bit smaller? Its too big, IMHO. Maybe reduce it to 80%? It's not an advertising MT. Just my single opinion, though.
:)
Sir An0nemous...
:twak: :twak: :twak:
Where's your allegiance?
:twak:
Oh it's still in my heart, sir! But let's keep it in more classy size
I agree on that point, a smaller or maybe 'less obvious' logo could have nice too: people would have ask 'what's that logo?' And get an answer from us, which impacts the mind a lot more than seeing a bigger logo :-)
I must say I don't disagree, but changing things at this late hour will only delay the final product and possibly increase the cost.
I WILL consider ALL these things as LESSONS LEARNED if I get the chance do be involved in another project of this nature.
There has been so much all of you have contributed to this and I wish it all could be done on this project, but maybe it's best if we hold a few things back for the next one.
Let's knock out those last 29 and show Victorinox just what a force we are...
-
The etch went on the blade because there was too much to put on the plate. We have such an awesome logo, we wanted to make sure it was used.
The etch is lasered into the steel and will only come off when the steel is group down enough that it comes off. It is actually IN the steel, not on It, so it is as durable as the steel itself.
And yes, if folks want to double up on shipping or make other arrangements, I am very happy to do so. As said, I am out of town for a few days (12 hours of driving today, probably 5-6 again tomorrow :ahhh ) so I may not answer things right away but I promise I will get to them ASAP.
I planned to place the order officially on the 20th, but I will be doing it sooner in hopes of getting these out ASAP.
Def
Im buying the MTO PX primarily because its an official MTO MT. But is it possible to make the whole logo a wee bit smaller? Its too big, IMHO. Maybe reduce it to 80%? It's not an advertising MT. Just my single opinion, though.
:)
Sir An0nemous...
:twak: :twak: :twak:
Where's your allegiance?
:twak:
Oh it's still in my heart, sir! But let's keep it in more classy size (http://emoji.tapatalk-cdn.com/emoji16.png)
I agree on that point, a smaller or maybe 'less obvious' logo could have nice too: people would have ask 'what's that logo?' And get an answer from us, which impacts the mind a lot more than seeing a bigger logo :-)
I must say I don't disagree, but changing things at this late hour will only delay the final product and possibly increase the cost.
I WILL consider ALL these things as LESSONS LEARNED if I get the chance do be involved in another project of this nature.
There has been so much all of you have contributed to this and I wish it all could be done on this project, but maybe it's best if we hold a few things back for the next one.
Let's knock out those last 29 and show Victorinox just what a force we are...
I'm assuming of course that it's laser etching, and as such it's computer controlled, and will just entail reducing the "lasering" to 80% of the original size. Ordering will start on the 20th, 12 days from now, so there's time to change etching instructions. But I might be totally off base here, out of ignorance, and so do ignore this suggestion :D
-
If our Vic contact could message them asking if it's possible, it'd be fine by me...
-
The etch went on the blade because there was too much to put on the plate. We have such an awesome logo, we wanted to make sure it was used.
The etch is lasered into the steel and will only come off when the steel is group down enough that it comes off. It is actually IN the steel, not on It, so it is as durable as the steel itself.
And yes, if folks want to double up on shipping or make other arrangements, I am very happy to do so. As said, I am out of town for a few days (12 hours of driving today, probably 5-6 again tomorrow :ahhh ) so I may not answer things right away but I promise I will get to them ASAP.
I planned to place the order officially on the 20th, but I will be doing it sooner in hopes of getting these out ASAP.
Def ....."
I'm assuming of course that it's laser etching, and as such it's computer controlled, and will just entail reducing the "lasering" to 80% of the original size. Ordering will start on the 20th, two weeks from now, so there's time. But I might be totally off base here, out of ignorance, and so do ignore this suggestion :D
I am the layman spuring this project so it may well be possible. I took from Grant's earlier post that he was going to go ahead and get the order placed with Vic' ASAP not waiting for the 20th. If he views this in time or you want to PM him with the suggestion it could definately be checked into and possibly still be done. I don't know how firmly we are committed to following the exact letter of the proof. As I said in my last post I have learned a lot in this process.
-
I know this is a partial double post but some how it did not post correctly in the last one. Probably sleep deprivation... :whistle:
I am the layman spuring this project so it may well be possible. I took from Grant's earlier post that he was going to go ahead and get the order placed with Vic' ASAP not waiting for the 20th. If he views this in time or you want to PM him with the suggestion it could definately be checked into and possibly still be done. I don't know how firmly we are committed to following the exact letter of the proof. As I said in my last post I have learned a lot in this process.
-
4 votes out of 60+ current orders is a very small minority for me to PM Def directly. Let's just wait for him to read this thread later and then for him to decide, if it's still feasible. Either way, I'll be proud to own this beautiful MTO PX
-
4 votes out of 60+ current orders is a very small minority for me to PM Def directly. Let's just wait for him to read this thread later and then for him to decide, if it's still feasible. Either way, I'll be proud to own this beautiful MTO PX
:tu: :tu:
and Good Night from Texas...
-
I count 71 sold :drink:
-
I just got a call telling me that my Swisstool RS is now lost forever...
I need something red to cheer me up :cry:
-
:(
-
I just got a call telling me that my Swisstool RS is now lost forever...
I need something red to cheer me up :cry:
That sucks man.
-
I just got a call telling me that my Swisstool RS is now lost forever...
I need something red to cheer me up :cry:
you need two to cheer you up fast! :whistle:
-
Hey guys, have a heart here. I'm old, if you reduce the size by 80% I won't ever see it. 50% maybe, but 80% I'll have to put it under a microscope...............yeesh modern kids.............no respect for thier elders........... :pok: :pok: :duel: :whistle:
-
Hey guys, have a heart here. I'm old, if you reduce the size by 80% I won't ever see it. 50% maybe, but 80% I'll have to put it under a microscope...............yeesh modern kids.............no respect for thier elders........... :pok: :pok: :duel: :whistle:
80% means reducing the image to 80% of what it was before (10inch becomes 8inch)
But we forgive you... because you're old :whistle:
-
Hey guys, have a heart here. I'm old, if you reduce the size by 80% I won't ever see it. 50% maybe, but 80% I'll have to put it under a microscope...............yeesh modern kids.............no respect for thier elders........... :pok: :pok: :duel: :whistle:
80% means reducing the image to 80% of what it was before (10inch becomes 8inch)
But we forgive you... because you're old :whistle:
They say maths is the first thing to go. :-\
-
After that the next thing to go is the, you know, whassname. What was I saying?
-
Sorry Mags what was that?
Maybe time to mow my ear hair. :facepalm:
-
After that the next thing to go is the, you know, whassname. What was I saying?
You were saying that twiglet is a bald turkey.... :whistle:
-
After that the next thing to go is the, you know, whassname. What was I saying?
You were saying that twiglet is a bald turkey.... :whistle:
And with thanksgiving just around the corner! :ahhh
-
After that the next thing to go is the, you know, whassname. What was I saying?
You were saying that twiglet is a bald turkey.... :whistle:
And with thanksgiving just around the corner! :ahhh
:drool: >:D
-
Maybe I can grow it long and comb it over the top like our witless leader! :tu:
-
After that the next thing to go is the, you know, whassname. What was I saying?
You were saying that twiglet is a bald turkey.... :whistle:
What's a twiglet young man? We had an orange for christmas and were grateful you know. It wasn't this new money - we had shillings and you could buy a bag of chips for sixpence but we didn't complain. And oh, didn't it snow!
-
Maybe I can grow it long and comb it over the top like our witless leader! :tu:
Going 'Full Trump' we call it over here.
Pics if you do. :D
-
Maybe I can grow it long and comb it over the top like our witless leader! :tu:
Going 'Full Trump' we call it over here.
Pics if you do. :D
Oops, I meant fearless, which is probably just as bad. :ahhh
-
After that the next thing to go is the, you know, whassname. What was I saying?
You were saying that twiglet is a bald turkey.... :whistle:
What's a twiglet young man? We had an orange for christmas and were grateful you know. It wasn't this new money - we had shillings and you could buy a bag of chips for sixpence but we didn't complain. And oh, didn't it snow!
Chips for sixpence sounds rather jolly good. :D
-
After that the next thing to go is the, you know, whassname. What was I saying?
You were saying that twiglet is a bald turkey.... :whistle:
What's a twiglet young man? We had an orange for christmas and were grateful you know. It wasn't this new money - we had shillings and you could buy a bag of chips for sixpence but we didn't complain. And oh, didn't it snow!
Bless us all suh, every one. :angel:
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
I was wearing warm clothes you know. :twak:
Gotta compensate for the heat being lost through my feet. :angel:
Hot feet!
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
I was wearing warm clothes you know. :twak:
Gotta compensate for the heat being lost through my feet. :angel:
Hot feet!
You would be warmer if you had more ear hair. :tu:
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
I was wearing warm clothes you know. :twak:
Gotta compensate for the heat being lost through my feet. :angel:
Hot feet!
You would be warmer if you had more ear hair. :tu:
Where the heckydern did them dadblamed kids hide my hearing aids this time :ahhh.............did sumbudy say sumpin' :facepalm: :facepalm: :whistle: :P
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
I was wearing warm clothes you know. :twak:
Gotta compensate for the heat being lost through my feet. :angel:
Hot feet!
You would be warmer if you had more ear hair. :tu:
True true.
And wild facial hair. :whistle:
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
I was wearing warm clothes you know. :twak:
Gotta compensate for the heat being lost through my feet. :angel:
Hot feet!
You would be warmer if you had more ear hair. :tu:
Where the heckydern did them dadblamed kids hide my hearing aids this time :ahhh.............did sumbudy say sumpin' :facepalm: :facepalm: :whistle: :P
NOBODY SAID ANYTHING, GRANDPA. :rofl:
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
I was wearing warm clothes you know. :twak:
Gotta compensate for the heat being lost through my feet. :angel:
Hot feet!
You would be warmer if you had more ear hair. :tu:
Where the heckydern did them dadblamed kids hide my hearing aids this time :ahhh.............did sumbudy say sumpin' :facepalm: :facepalm: :whistle: :P
NOBODY SAID ANYTHING, GRANDPA. :rofl:
First the maths, then the voices start... :ahhh
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
I was wearing warm clothes you know. :twak:
Gotta compensate for the heat being lost through my feet. :angel:
Hot feet!
You would be warmer if you had more ear hair. :tu:
Where the heckydern did them dadblamed kids hide my hearing aids this time :ahhh.............did sumbudy say sumpin' :facepalm: :facepalm: :whistle: :P
NOBODY SAID ANYTHING, GRANDPA. :rofl:
First the maths, then the voices start... :ahhh
When does physics go?
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
Not sure if I want to see the pics.
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
I was wearing warm clothes you know. :twak:
Gotta compensate for the heat being lost through my feet. :angel:
Hot feet!
You would be warmer if you had more ear hair. :tu:
Where the heckydern did them dadblamed kids hide my hearing aids this time :ahhh.............did sumbudy say sumpin' :facepalm: :facepalm: :whistle: :P
NOBODY SAID ANYTHING, GRANDPA. :rofl:
First the maths, then the voices start... :ahhh
When does physics go?
Right after chemistry AFAIK. ???
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
Not sure if I want to see the pics.
A blatant lie, you know you do Nate. :D
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
Not sure if I want to see the pics.
A blatant lie, you know you do Nate. :D
Of course you do, my body is beeeutiful!
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
Not sure if I want to see the pics.
A blatant lie, you know you do Nate. :D
Of course you do, my body is beeeutiful!
Yeah........I do....... :rofl:
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
Not sure if I want to see the pics.
A blatant lie, you know you do Nate. :D
Of course you do, my body is beeeutiful!
Pabs frolicking in an ice storm, we can print holiday cards, or a calendar or something. :D
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
Not sure if I want to see the pics.
A blatant lie, you know you do Nate. :D
Of course you do, my body is beeeutiful!
Yeah........I do....... :rofl:
MTO, now gluten free and without fake news! :cheers:
-
Hey guys, have a heart here. I'm old, if you reduce the size by 80% I won't ever see it. 50% maybe, but 80% I'll have to put it under a microscope...............yeesh modern kids.............no respect for thier elders........... :pok: :pok: :duel: :whistle:
80% means reducing the image to 80% of what it was before (10inch becomes 8inch)
But we forgive you... because you're old :whistle:
Mechanickal,
Would you guys make up your minds? Now you want to make the logo larger? :twak: :twak: In fractions the smaller the bottom number the larger the individual piece. :facepalm: I can forgive all the old folks on here, they just forgot. ??? In the case of some (I won't say any names, but his initials are BUTCH) they predate math so I even get them. :sa: I just want to see you pick one and stick to it.
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
Not sure if I want to see the pics.
:facepalm:
A blatant lie, you know you do Nate. :D
Of course you do, my body is beeeutiful!
:facepalm:
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
Not sure if I want to see the pics.
A blatant lie, you know you do Nate. :D
Of course you do, my body is beeeutiful!
Pabs frolicking in an ice storm, we can print holiday cards, or a calendar or something. :D
You make me sound like a doggy. :D
-
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
Not sure if I want to see the pics.
A blatant lie, you know you do Nate. :D
Of course you do, my body is beeeutiful!
Pabs frolicking in an ice storm, we can print holiday cards, or a calendar or something. :D
You make me sound like a doggy. :D
You would have to carry an MT to keep with the theme here, maybe on a necklace or something...
-
:rofl: :rofl: :rofl:
I ran barefoot in the frosty grass this morn'. First good frost of the year! :o
Wow, is streaking a thing again Pabs? :D
Pics or it didn't happen. :P
Not sure if I want to see the pics.
A blatant lie, you know you do Nate. :D
Of course you do, my body is beeeutiful!
Pabs frolicking in an ice storm, we can print holiday cards, or a calendar or something. :D
You make me sound like a doggy. :D
:rofl: :rofl: :rofl:
-
How much is that doggy in the window?
The one with the cute multitool. :dd:
-
How much is that doggy in the window?
The one with the cute multitool. :dd:
Sixpence.
-
(https://i.imgflip.com/1z0dj3.jpg) (https://imgflip.com/i/1z0dj3)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
-
:facepalm:
:rofl: :rofl: :rofl:
-
We had to make our own fun in my day.
-
We had to make our own fun in my day.
Yep. When I was a kid, we had a bundle of sticks and a rock. And we had to share the rock.
-
We had to make our own fun in my day.
Yep. When I was a kid, we had a bundle of sticks and a rock. And we had to share the rock.
Ya can thank me & Adam for coming up with that rock recipe............yip........... :think: :drink:
-
:rofl:
-
(https://i.imgflip.com/1z0dj3.jpg) (https://imgflip.com/i/1z0dj3)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
Were you hiding in those bushes after all?! >:(
I thought I was being careful
-
Always watching Pabs, always watching......
(https://i.imgflip.com/1z0g4p.jpg) (https://imgflip.com/i/1z0g4p)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
-
Hey guys, have a heart here. I'm old, if you reduce the size by 80% I won't ever see it. 50% maybe, but 80% I'll have to put it under a microscope...............yeesh modern kids.............no respect for thier elders........... :pok: :pok: :duel: :whistle:
80% means reducing the image to 80% of what it was before (10inch becomes 8inch)
But we forgive you... because you're old :whistle:
Mechanickal,
Would you guys make up your minds? Now you want to make the logo larger? :twak: :twak: In fractions the smaller the bottom number the larger the individual piece. :facepalm: I can forgive all the old folks on here, they just forgot. ??? In the case of some (I won't say any names, but his initials are BUTCH) they predate math so I even get them. :sa: I just want to see you pick one and stick to it.
What??!
You're the son of your dad I guess...
80% means that there is only 80% left of the original size...
A tile of 10x10 turns into a tile of 8x8 if you turn it into an 80% crop...
Which is SMALLER! :twak:
-
And this thread is getting out of hand, bad...
:ahhh
Fun fun fun!
:MTO:
-
Always watching Pabs, always watching......
(https://i.imgflip.com/1z0g4p.jpg) (https://imgflip.com/i/1z0g4p)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
:rofl:
-
Always watching Pabs, always watching......
(https://i.imgflip.com/1z0g4p.jpg) (https://imgflip.com/i/1z0g4p)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
:rofl:
You won't be laughing when mags turns his eyes on you I bet. :whistle:
-
Always watching Pabs, always watching......
(https://i.imgflip.com/1z0g4p.jpg) (https://imgflip.com/i/1z0g4p)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
:rofl:
You won't be laughing when mags turns his eyes on you I bet. :whistle:
We watch out for each other all the time.
-
Always watching Pabs, always watching......
(https://i.imgflip.com/1z0g4p.jpg) (https://imgflip.com/i/1z0g4p)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
:rofl:
You won't be laughing when mags turns his eyes on you I bet. :whistle:
We watch out for each other all the time.
Like all those people in the soaps?
(Did you hear what mags said? Pablo had shrinkage! titters )
-
:facepalm:
-
:facepalm:
Butch hasn't been around here for long. Can you tell?
-
:facepalm:
Butch hasn't been around here for long. Can you tell?
Yeah, but is he catching on. He will be just as bad as the rest of us in no time.
-
:facepalm:
Butch hasn't been around here for long. Can you tell?
Yeah, but is he catching on. He will be just as bad as the rest of us in no time.
Mags said it first! :angel:
Unless you mean titters? :think:
Oxford dictionary: Titter (http://en.oxforddictionaries.com/definition/titter)
I understand British English can sound naughty to the American ear. :D
-
I also think it would look better if the logo was smaller than on the proof :tu:
-
I would jump in also if the “logo” was smaller... that is exactly what has stopped me from buying one.
Edit:I would even consider paying more for such a feature.
-
I'm glad one is coming either way but I certainly would not mind if the logo was smaller. :cheers:
-
:facepalm:
Butch hasn't been around here for long. Can you tell?
Yeah, but is he catching on. He will be just as bad as the rest of us in no time.
Mags said it first! :angel:
Unless you mean titters? :think:
Oxford dictionary: Titter (http://en.oxforddictionaries.com/definition/titter)
I understand British English can sound naughty to the American ear. :D
Hey Of course I know what titter means..........yeesh.......... :pok: :drool:
-
We had to make our own fun in my day.
Yep. When I was a kid, we had a bundle of sticks and a rock. And we had to share the rock.
You were lucky .... :whistle:
-
Anyone have a stock count?
-
71 preorders
29 unclaimed
-
Grant said that he was going to hold 10 or so in reserve so that only leaves 19 or less available.
-
Another vote for slightly smaller etch - Maybe only the logo 80-90% of mock up - Text the same size?
Not a big big deal for me
Thanks for the tec info on the etch process and durability Boss - That is good and good to know :tu:
-
The problem with having specific expectations is that they are almost never met. Embrace what is, and disappointment will vanish like the shadow it really is. :drink:
-
The problem with having specific expectations is that they are almost never met. Embrace what is, and disappointment will vanish like the shadow it really is. :drink:
Yeah like, thank God for dirty dishes, they mean you have a full belly............yip........... :facepalm: :facepalm: :whistle:
-
The problem with having specific expectations is that they are almost never met. Embrace what is, and disappointment will vanish like the shadow it really is. :drink:
I am so on this page anymore. :cheers:
-
Yeah like, thank God for dirty dishes, they mean you have a full belly............yip........... :facepalm: :facepalm: :whistle:
Hey, you ain't kidding. I once worked as a dishwasher & prep cook. Kept me fed and, if I had done a good job for the Chef and Sous-chef, I got a free beer or two at the end of the shift. Hard work, good times. :cheers:
-
Yeah like, thank God for dirty dishes, they mean you have a full belly............yip........... :facepalm: :facepalm: :whistle:
Hey, you ain't kidding. I once worked as a dishwasher & prep cook. Kept me fed and, if I had done a good job for the Chef and Sous-chef, I got a free beer or two at the end of the shift. Hard work, good times. :cheers:
I also served my time as a diver ;)
-
Yeah like, thank God for dirty dishes, they mean you have a full belly............yip........... :facepalm: :facepalm: :whistle:
Hey, you ain't kidding. I once worked as a dishwasher & prep cook. Kept me fed and, if I had done a good job for the Chef and Sous-chef, I got a free beer or two at the end of the shift. Hard work, good times. :cheers:
I also served my time as a diver ;)
Another kitchen monkey here. Spent my entire teenage years in kitchens being screamed at by chefs up to my elbows in boiling soapy water.
-
Yeah like, thank God for dirty dishes, they mean you have a full belly............yip........... :facepalm: :facepalm: :whistle:
Hey, you ain't kidding. I once worked as a dishwasher & prep cook. Kept me fed and, if I had done a good job for the Chef and Sous-chef, I got a free beer or two at the end of the shift. Hard work, good times. :cheers:
Yeah like, thank God for dirty dishes, they mean you have a full belly............yip........... :facepalm: :facepalm: :whistle:
Hey, you ain't kidding. I once worked as a dishwasher & prep cook. Kept me fed and, if I had done a good job for the Chef and Sous-chef, I got a free beer or two at the end of the shift. Hard work, good times. :cheers:
I also served my time as a diver ;)
Another kitchen monkey here. Spent my entire teenage years in kitchens being screamed at by chefs up to my elbows in boiling soapy water.
:like: :like: :like: :drink:
-
Put myself through school as a grease monkey in a service station. Then became a lab rat.
-
Another kitchen monkey here. Spent my entire teenage years in kitchens being screamed at by chefs up to my elbows in boiling soapy water.
I loved those guys. Screaming their heads off one minute, buying you a beer the next.
-
Those weren some Good Days and Good Times. :cheers: Can't say much more than that. The Ol' Man might get jealous. :whistle:
NOW back to TOPIC... :think:
WHY DO WE STILL HAVE 29 LEFT? :twak: :twak: Anybody? :ahhh :ahhh
Just to keep it easy to find I'll post it again. Here you go...
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html :drool: :drool: :drool:
Now get those last 29 off the shelf and out the door.... :pok: :pok:
P.S. It has been a hoot catching up on today's posts. A lot of :rofl: :rofl: :rofl:
-
I'm biding my time.....but starting to feel more confident that I'll be able to place a second order....
(http://www.pic4ever.com/images/hexer.gif)
-
Sorry, I myself am not buying one. Still wanted to help keep the thread on top of the forum.
-
Sorry, I myself am not buying one. Still wanted to help keep the thread on top of the forum.
:tu: :tu:
-
Sorry, I myself am not buying one. Still wanted to help keep the thread on top of the forum.
:tu: :tu:
:salute:
-
...I myself am not buying one....
Do you have a Pioneer X?
'Cuz if not......well.....you need a Pioneer X...and....here is a cool version......uhhhhhh....just sayin'....... :pok: >:D
-
...I myself am not buying one....
Do you have a Pioneer X?
'Cuz if not......well.....you need a Pioneer X...and....here is a cool version......uhhhhhh....just sayin'....... :pok: >:D
+1
-
I am wondering if I can go to a vic store and ask them for a custom engraving on the plate and have engraved something like '* out 100" (after I know which order number I was) :think:
-
I am wondering if I can go to a vic store and ask them for a custom engraving on the plate and have engraved something like '* out 100" (after I know which order number I was) :think:
You should be able to take it any where that dose laser engraving and have any thing you want that will fit put on the plate. Just make certain it is laser engraved to help prevent flaking of the color.
-
I am wondering if I can go to a vic store and ask them for a custom engraving on the plate and have engraved something like '* out 100" (after I know which order number I was) :think:
You should be able to take it any where that dose laser engraving and have any thing you want that will fit put on the plate. Just make certain it is laser engraved to help prevent flaking of the color.
I thought of stamping it in the liner underneath the corkscr... :facepalm:
-
Another kitchen monkey here. Spent my entire teenage years in kitchens being screamed at by chefs up to my elbows in boiling soapy water.
I loved those guys. Screaming their heads off one minute, buying you a beer the next.
Yeah! The chefs at my place had a beer ration. A beer ration :facepalm: A large one too, plus it was 'a splash of wine/port/sherry/whatever for the pot, ad a splash for chef'. They were half pi55ed all the time. :D
-
...I myself am not buying one....
Do you have a Pioneer X?
'Cuz if not......well.....you need a Pioneer X...and....here is a cool version......uhhhhhh....just sayin'....... :pok: >:D
No I do not. The only alox I have is a Wegner SI.
-
Sorry, I myself am not buying one. Still wanted to help keep the thread on top of the forum.
bump :cheers:
-
I'm biding my time.....but starting to feel more confident that I'll be able to place a second order....
(http://www.pic4ever.com/images/hexer.gif)
Do it, you know you want to :pok:
-
I am wondering if I can go to a vic store and ask them for a custom engraving on the plate and have engraved something like '* out 100" (after I know which order number I was) :think:
You should be able to take it any where that dose laser engraving and have any thing you want that will fit put on the plate. Just make certain it is laser engraved to help prevent flaking of the color.
I thought of stamping it in the liner underneath the corkscr... :facepalm:
Your solution is a lot cleaner than mine !
-
I am wondering if I can go to a vic store and ask them for a custom engraving on the plate and have engraved something like '* out 100" (after I know which order number I was) :think:
You should be able to take it any where that dose laser engraving and have any thing you want that will fit put on the plate. Just make certain it is laser engraved to help prevent flaking of the color.
I thought of stamping it in the liner underneath the corkscr... :facepalm:
Your solution is a lot cleaner than mine !
(https://i.imgflip.com/1z2r6c.jpg) (https://imgflip.com/i/1z2r6c)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
(Yes I know that you know already :facepalm:)
-
"No Corkscrew"
Well, I just checked. It turns out that that is an accurate statement. Still, the PX is close to the perfect pocket knife in my book. The only thing it's really missing is a hook.
-
No I do not. The only alox I have is a Wegner SI.
Dude....really??? ??? :pok:
-
No I do not. The only alox I have is a Wegner SI.
Dude....really??? ??? :pok:
I know...... :facepalm:
-
Even if you don't jump on this exclusive, go out and get ye a Pioneer X. I have a Silver Alox version. It's excellent! My +B version rocks!
I joke around about which SAK is my favorite, but hands down the PX leads the pack. If I could only have one......yeah, the PX.
-
But get this one and then do the PX 30-day challenge. You'll end up with a new favorite knife, a small piece of history, a merit badge, and a grin. How sweet is that deal?
-
I really like Alox. Heavy built, rock solid and I never carry them. I want to carry them, but they lack in tools and they no longer have bails. The PX is nice, but I like the Farmer more. I don't really need scissors. Now both the saw and scissors on an Alox would rock! I know some would think the weight would be a bit much, but it is no biggie for me, I used to EDC a Surge. I will again when I get the funds to buy a new one.
-
I really like Alox. Heavy built, rock solid and I never carry them. I want to carry them, but they lack in tools and they no longer have bails. The PX is nice, but I like the Farmer more. I don't really need scissors. Now both the saw and scissors on an Alox would rock! I know some would think the weight would be a bit much, but it is no biggie for me, I used to EDC a Surge. I will again when I get the funds to buy a new one.
So a Farmer X? :D
-
But get this one and then do the PX 30-day challenge. You'll end up with a new favorite knife, a small piece of history, a merit badge, and a grin. How sweet is that deal?
Right!
-
Maybe one day we will have enough clout to ask Victorinox for a Farmer X. :dd:
A man can dream!
-
Maybe one day we will have enough clout to ask Victorinox for a Farmer X. :dd:
A man can dream!
I'd shake my wallet again for a Farmer X!
-
Maybe one day we will have enough clout to ask Victorinox for a Farmer X. :dd:
A man can dream!
I'd shake my wallet again for a Farmer X!
Me too !
-
I want an alox champ with the full compliment of the standard champ tools..............toothpick, tweezers, ink pen, & streight pin included.............I know..........sigh........ :facepalm: :climber:
-
Farmer X....hmmmm....MTo Multitool of 2018?
:MTO:
-
psh, you awl know it's gonna be a Swiza :P
-
psh, you awl know it's gonna be a Swiza :P
Really! Will we be able to order an MTO special edition Swiza? How about one with a damast blade? :dd:
-
psh, you awl know it's gonna be a Swiza
Really! Will we be able to order an MTO special edition Swiza? How about one with a damast blade? :dd:
Light the torches people!
We've got some witches to burn.
:mn:
-
... :D
-
... :D
As Fox Mulder said "I want to believe" :doh:
which got me thinking about the X Files and guess what the power of the interweb reveals he wore a Victorinox watch... "What a guy etc etc"
-
... :D
As Fox Mulder said "I want to believe" :doh:
which got me thinking about the X Files and guess what the power of the interweb reveals he wore a Victorinox watch... "What a guy etc etc"
I bet he had a SAK in his pocket too
-
For 2017/18,
I firmly believe that the Boker Plus Tech-Tool would, by far, out do any Swiza...
:whistle:
PS maybe even the SAKS...
>:D
-
Relight the torches!
:viking:
-
:woohoo: :like:
Thanks to SteveC for the heads up on this!!!!!
-
He's back! :woohoo:
How are you? :drink:
-
:like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like:
-
:woohoo: :like:
Thanks to SteveC for the heads up on this!!!!!
Helloooooooo! :waving:
-
:woohoo: :like:
Thanks to SteveC for the heads up on this!!!!!
Now that, Ladies and Gentleman, is pure magic ! :cheers:
-
... :D
As Fox Mulder said "I want to believe" :doh:
which got me thinking about the X Files and guess what the power of the interweb reveals he wore a Victorinox watch... "What a guy etc etc"
I bet he had a SAK in his pocket too
Witch one ?
-
:woohoo: :like:
Thanks to SteveC for the heads up on this!!!!!
Welcome back bromigo! I hope things are well with you.
-
:like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like:Z :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like: :like:
I wnoder if there is anybody that likes this????????????????
-
Witch one ?
hmmm... I'm going to say a Wenger Traveler
-
Sales shure have gotten slow. :whistle:
We may have to cancel on the next edition......:think:
Still 27 left in the store. :twak: :twak:
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.ht
-
Facebook blast?
-
I have posted it on FB, Twitter and Instagram, and I probably will again. In the meantime, expect to see a newsletter coming shortly with Pioneer X info in it. :D
Def
-
I'll post it in a couple collecting groups. :cheers:
-
I have posted it on FB, Twitter and Instagram, and I probably will again. In the meantime, expect to see a newsletter coming shortly with Pioneer X info in it. :D
Def
:salute:
I'll post it in a couple collecting groups. :cheers:
:tu:
-
Sales shure have gotten slow. :whistle:
We may have to cancel on the next edition......:think:
Still 27 left in the store. :twak: :twak:
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.ht
73 sold! That's amazing!! Do you have to sell them by a certain date or something?
-
Nope, it's simply a matter of getting as many gone as quickly as possible. We are committed, so if I have to I cam sit on the rest for years until they are gone.
Def
-
Seems I've read at least a half dozen to dozen folks say they wanted another one. You guys will sell all 100 within this month for sure! I'd bet on it, I mean a red Alox pioneer x, WITH toty and logo?! I'm mean cmon :climber:
-
Yeah, I am not too concerned. There are lots of opportunities to move the remainder of them. :tu:
Def
-
:woohoo: :like:
Thanks to SteveC for the heads up on this!!!!!
Good to see you're back!
Hope everything is all right! :cheers:
-
Keep one for the donation draw :D
-
Keep one for the donation draw :D
+1
-
Sales shure have gotten slow. :whistle:
We may have to cancel on the next edition......:think:
Still 27 left in the store. :twak: :twak:
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.ht
73 sold! That's amazing!! Do you have to sell them by a certain date or something?
This has been a resounding success, :salute: and wih 2 more sold last night we now set 75 sold. I just kinda like to stir the pot from time to time :think: and see if some of you had some new ideas or friends that could help move the remainder. :gimme: So at the risk of injury to self, I was just " :pok: :pok: the bear." So to speek.
I can't say enough how great You guys are and how much fun this as been all thanks to your support. :tu:
Douglas
-
Anybody seen any banannas? :whistle:
-
(https://thenypost.files.wordpress.com/2015/07/bananas2.jpg?quality=90&strip=all)
-
(https://cmsplatypus.gothamist.com/gothamistgallery/2017/4/21/92c222a3cmuseum_of_ice_creamclaylarsen3694-jpg.jpeg)
-
(https://cdn.vox-cdn.com/thumbor/5LXoI-KIwEBeVPEdaCPx6wXXo2c=/0x0:4000x3100/1200x800/filters:focal(1680x1230:2320x1870)/cdn.vox-cdn.com/uploads/chorus_image/image/49183721/shutterstock_391404361.0.jpg)
-
:facepalm:
-
(https://pbs.twimg.com/media/CBIethBU8AEwpJR.jpg:large)
-
:woohoo: :like:
Thanks to SteveC for the heads up on this!!!!!
heeeey! Welcome again!!! :cheers: :cheers:
hope you're feeling better mate :tu:
-
Is there already an estimated delivery date? It would make a great X-mas present, if it arrives before then?
-
:woohoo: :like:
Thanks to SteveC for the heads up on this!!!!!
Now if we could get All those banannas to dance that would be a propper CELEBRATION. :whistle:
-
I just checked and it's down to 24 left in the store now
-
Just ordered! :cheers:
-
(https://img.memecdn.com/Pervert-Banana_o_31743.jpg)
-
(https://img.memecdn.com/Pervert-Banana_o_31743.jpg)
:o :dwts:
Think of the children!!!!!!!!!!!!!!
:rofl:
-
(https://img.memecdn.com/Pervert-Banana_o_31743.jpg)
:o :dwts:
Think of the children!!!!!!!!!!!!!!
:rofl:
Quite, they all deserve a MTO Red Pioneer X :salute:
-
(https://img.memecdn.com/Pervert-Banana_o_31743.jpg)
:o :dwts:
Think of the children!!!!!!!!!!!!!!
:rofl:
Quite, they all deserve a MTO Red Pioneer X :salute:
If we are going there, how about a birth year alox instead? :dd:
-
(https://img.memecdn.com/Pervert-Banana_o_31743.jpg)
That... strangely does it for me...
-
:sa: :shrug: :waving: :facepalm: :climber:
-
What Butch said.
-
What Butch said.
:like: :whistle:
-
:facepalm:
-
(https://img.memecdn.com/Pervert-Banana_o_31743.jpg)
That... strangely does it for me...
Good. I thought I might have been the only one.
But I know half the people here was thinking the same thing. :rofl:
-
Is the banana on the right Louis C.K.?
-
Is there already an estimated delivery date? It would make a great X-mas present, if it arrives before then?
I am doing everything I can to speed up the process and try to make that a reality.
As for saving one for a Donation Draw, I probably will, but by then everyone will probably already have one!
Def
-
Down to 22.. :cheers: :cheers:
Keep that number falling :pok: :pok:
-
is this paypal only? I won a visa gift card a few months ago, was wondering if I can use that, as my paypal balance is almost diddly
-
I would assume yes. Visa Gift cards are supposed to be able to be used anywhere you can use a Visa CC. Go for it. :whistle:
-
Is there already an estimated delivery date? It would make a great X-mas present, if it arrives before then?
I am doing everything I can to speed up the process and try to make that a reality.
As for saving one for a Donation Draw, I probably will, but by then everyone will probably already have one!
Def
Yes, so we'll all realise we'd like a second :D
-
(https://anasarmiento.files.wordpress.com/2010/03/naughty-banana.jpg)
-
So, what you're saying is I should expect the the MTOPX in the mail pretty soon, then?
(http://www.mysmiley.net/imgs/smile/confused/confused0006.gif) (http://www.mysmiley.net)
-
Bananas. Bananas everywhere! :ahhh
Make the next MTO knife with a banana on the engraving plate and they will be gone on the first day.
:facepalm: :whistle: :D
-
Bananas. Bananas everywhere! :ahhh
Make the next MTO knife with a banana on the engraving plate and they will be gone on the first day.
:facepalm: :whistle: :D
Can do better than that :D (Is that a banana in your pocket ... ?)
-
Just nine days (9 Days = 216 hours) left to take advantage of the Anouncement DIscount and as of now just 22 units left. Time and quantity are both running out...
-
... Time and quantity are both running out...
Is it a minimum order of 100 with Victorinox? Or they would only sell MTO 100?
Just curious. Am considering ordering a 2nd, but I don't want to take one away from someone that might want one.
-
... Time and quantity are both running out...
Is it a minimum order of 100 with Victorinox? Or they would only sell MTO 100?
Just curious. Am considering ordering a 2nd, but I don't want to take one away from someone that might want one.
It was a minimum order of 100, and I'm pretty certain everyone that has their heart set on one has already ordered by now. I think you, Nix and any one else considering a second could do so with a clear conscience by now.
Happy Ordering. :cheers:
-
I'm going to wait until Thursday. That seems fair, yeah?
-
It was a minimum order of 100.......
Don't think so Doug - Didn't Def say earlier in this thread that it is one hundred and only one hundred of these
However we might do something else/different another time.
- So there will never be more than 100 of the red MTo 2016 PXs
H
-
hey what was the price again shipped to USA? and do I need a code, too many pages to read through, trying to get the funds together
-
It was a minimum order of 100.......
Don't think so Doug - Didn't Def say earlier in this thread that it is one hundred and only one hundred of these
However we might do something else/different another time.
- So there will never be more than 100 of the red MTo 2016 PXs
H
You are correct on both counts, but it was also a minimum of 100 for Victorinox to make them for us. I was refering to how many are still left in the store and the amount of time left. Proportionally it is a prety safe bet there are enough to go around even if a few of us get two. I don't want to lead anyone to do something they are not comfortable with though, so please do as you feel right.
-
hey what was the price again shipped to USA? and do I need a code, too many pages to read through, trying to get the funds together
There is no code and I show with shipping it wuld be just under $67.00 to Texas. I'm not certain if the shipping is location specific so it could be slightly different depending on your location in the US. Hope that helps.
Here's the link again.
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html
-
thanks Douglas, you are a good hype man :cheers:
-
I'm going to wait until Thursday. That seems fair, yeah?
I didn't :angel: :whistle:
-
Don't think so Doug - Didn't Def say earlier in this thread that it is one hundred and only one hundred of these
However we might do something else/different another time.
- So there will never be more than 100 of the red MTo 2016 PXs
H
Make that 99. The operating theater is being set up as we speak :whistle:
-Tom
-
I'm going to wait until Thursday. That seems fair, yeah?
I didn't :angel: :whistle:
Me neither :whistle: :whistle: :cheers:
-
The current count is 72 sold.
I am planning to send a newsletter advertising them tomorrow.
If you are waiting to buy one (or a second one etc), you really should do it ASAP because I really don't expect they will last much longer.
Consider yourselves warned. :pok:
Def
-
I'm going to wait until Thursday. That seems fair, yeah?
I didn't :angel: :whistle:
Me neither :whistle: :whistle: :cheers:
I did say I'd be down for a few if the team needs it... :whistle:
-
I'm rolling the dice and guessing there will still be a second one for me available Thursday. But, if they're all gone by then, that will be great news too. I'll be glad if someone else gets a shot at one.
-
I'm rolling the dice and guessing there will still be a second one for me available Thursday. But, if they're all gone by then, that will be great news too. I'll be glad if someone else ge :pok:ts a shot at one.
Mayhap we could have a Leave it to Beaver Badge,...........or Perhaps Leave it To Nix............ :whistle:
-
I'm in, :mail: :drool:
-
I'm in, :mail: :drool:
:like: :tu: :cheers:
-
I'm rolling the dice and guessing there will still be a second one for me available Thursday. But, if they're all gone by then, that will be great news too. I'll be glad if someone else ge :pok:ts a shot at one.
Mayhap we could have a Leave it to Beaver Badge,...........or Perhaps Leave it To Nix............ :whistle:
Gotta Respect the OL'SCHOOL ethics, so...
PLAY NICE, :pok: OL'TIMER!! :rofl:
-
I'm rolling the dice and guessing there will still be a second one for me available Thursday. But, if they're all gone by then, that will be great news too. I'll be glad if someone else ge :pok:ts a shot at one.
Mayhap we could have a Leave it to Beaver Badge,...........or Perhaps Leave it To Nix............ :whistle:
Gotta Respect the OL'SCHOOL ethics, so...
PLAY NICE, :pok: OL'TIMER!! :rofl:
Yas'm............sigh............ ::)
-
I'm in.
:salute: :salute:
:drool: :drool:
-
:like: :cheers: :tu:
-
18 left :climber:
-
18 left :climber:
That's next to nothing...
-
18 left :climber:
That's next to nothing...
Personally I thought it was next to 17 and 19
I'll get my coat :rofl: :rofl:
-
18 left :climber:
That's next to nothing...
Personally I thought it was next to 17 and 19
I'll get my coat :rofl: :rofl:
:rofl: :rofl: :cheers: :climber:
-
18 left :climber:
That's next to nothing...
Personally I thought it was next to 17 and 19
I'll get my coat :rofl: :rofl:
:rofl: :rofl: :cheers: :climber:
:rant:
I already threw your coat out the door.
Hurry now or you're next to take flight! :megaslap:
:whistle:
-
(http://www.pic4ever.com/images/meditationf.gif)
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
You'd probably twist the can opener and cap lifter anyway :whistle:
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
You'd probably twist the can opener and cap lifter anyway :whistle:
Nah, alox is too beefy. :dd:
But just in case, I'll be conducting "tests" with this one. Its my only swiss alox.
(http://i.imgur.com/TaDIqk0.jpg)
Looks normal right?
Show content
(http://i.imgur.com/oJ8ZnzG.jpg)
:D
And best of all, the scales were pre scratched by mags. :whistle:
So I don't feel guilty!
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
You'd probably twist the can opener and cap lifter anyway :whistle:
Nah, alox is too beefy. :dd:
But just in case, I'll be conducting "tests" with this one. Its my only swiss alox.
(http://i.imgur.com/TaDIqk0.jpg)
Looks normal right?
Show content
(http://i.imgur.com/oJ8ZnzG.jpg)
:D
And best of all, the scales were pre scratched by mags. :whistle:
So I don't feel guilty!
Aww, who am I kidding, I can't conduct "tests" on this lovely. :cry:
Even in its current used state it's too pretty to abuse.
Come here my precious, let's hug... :surrender:
-
Seventeen.............. :nothingtoadd:........... :facepalm: :multi:
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
Hook you say? You are in luck....
(https://forum.multitool.org/index.php?action=dlattach;topic=74471.0;attach=344532)
Just what the doctor ordered! (https://forum.multitool.org/index.php/topic,74471.0.html#_) :D
Def
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
You'd probably twist the can opener and cap lifter anyway :whistle:
Nah, alox is too beefy. :dd:
But just in case, I'll be conducting "tests" with this one. Its my only swiss alox.
(http://i.imgur.com/TaDIqk0.jpg)
Looks normal right?
Show content
(http://i.imgur.com/oJ8ZnzG.jpg)
:D
And best of all, the scales were pre scratched by mags. :whistle:
So I don't feel guilty!
I scratched them special just for you Pabs. If you'da said, I would have pre-twisted the tools as well :pok:
-
:rofl:
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
You'd probably twist the can opener and cap lifter anyway :whistle:
Nah, alox is too beefy. :dd:
But just in case, I'll be conducting "tests" with this one. Its my only swiss alox.
(http://i.imgur.com/TaDIqk0.jpg)
Looks normal right?
Show content
(http://i.imgur.com/oJ8ZnzG.jpg)
:D
And best of all, the scales were pre scratched by mags. :whistle:
So I don't feel guilty!
I scratched them special just for you Pabs. If you'da said, I would have pre-twisted the tools as well :pok:
I'm glad I didn't say anything then. :D
I'm liking (model name needed) more and more. :climber:
-
I'm glad I didn't say anything then. :D
I'm liking The Master Opener more and more. :climber:
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
You'd probably twist the can opener and cap lifter anyway :whistle:
Nah, alox is too beefy. :dd:
But just in case, I'll be conducting "tests" with this one. Its my only swiss alox.
(http://i.imgur.com/TaDIqk0.jpg)
Looks normal right?
Show content
(http://i.imgur.com/oJ8ZnzG.jpg)
:D
And best of all, the scales were pre scratched by mags. :whistle:
So I don't feel guilty!
I scratched them special just for you Pabs. If you'da said, I would have pre-twisted the tools as well :pok:
I'm glad I didn't say anything then. :D
I'm liking The Master Opener more and more. :climber:
:hatsoff: :like:
Is it a bit much though? Master Opener implies that it has everything opening related? :think:
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
You'd probably twist the can opener and cap lifter anyway :whistle:
Nah, alox is too beefy. :dd:
But just in case, I'll be conducting "tests" with this one. Its my only swiss alox.
(http://i.imgur.com/TaDIqk0.jpg)
Looks normal right?
Show content
(http://i.imgur.com/oJ8ZnzG.jpg)
:D
And best of all, the scales were pre scratched by mags. :whistle:
So I don't feel guilty!
I scratched them special just for you Pabs. If you'da said, I would have pre-twisted the tools as well :pok:
I'm glad I didn't say anything then. :D
I'm liking The Master Opener more and more. :climber:
:hatsoff: :like:
Is it a bit much though? Master Opener implies that it has everything opening related? :think:
ChildsafeSoldier (for children)?
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
You'd probably twist the can opener and cap lifter anyway :whistle:
Nah, alox is too beefy. :dd:
But just in case, I'll be conducting "tests" with this one. Its my only swiss alox.
(http://i.imgur.com/TaDIqk0.jpg)
Looks normal right?
Show content
(http://i.imgur.com/oJ8ZnzG.jpg)
:D
And best of all, the scales were pre scratched by mags. :whistle:
So I don't feel guilty!
I scratched them special just for you Pabs. If you'da said, I would have pre-twisted the tools as well :pok:
I'm glad I didn't say anything then. :D
I'm liking (model name needed) more and more. :climber:
Leftoverbitsman?
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
You'd probably twist the can opener and cap lifter anyway :whistle:
Nah, alox is too beefy. :dd:
But just in case, I'll be conducting "tests" with this one. Its my only swiss alox.
(http://i.imgur.com/TaDIqk0.jpg)
Looks normal right?
Show content
(http://i.imgur.com/oJ8ZnzG.jpg)
:D
And best of all, the scales were pre scratched by mags. :whistle:
So I don't feel guilty!
I scratched them special just for you Pabs. If you'da said, I would have pre-twisted the tools as well :pok:
I'm glad I didn't say anything then. :D
I'm liking The Master Opener more and more. :climber:
:hatsoff: :like:
Is it a bit much though? Master Opener implies that it has everything opening related? :think:
ChildsafeSoldier?
What's missing to make it a master opener??
A combo tool? :rofl:
-
I'd get one of these, except it has no hook. :facepalm:
For me, under 74mm is fine, any bigger and it better have the hook if it includes scissors. ::)
Stupid reason I know, but that's the way it is. :ahhh
I'm on the lookout now for a red pioneer. :dd:
You'd probably twist the can opener and cap lifter anyway :whistle:
Nah, alox is too beefy. :dd:
But just in case, I'll be conducting "tests" with this one. Its my only swiss alox.
(http://i.imgur.com/TaDIqk0.jpg)
Looks normal right?
Show content
(http://i.imgur.com/oJ8ZnzG.jpg)
:D
And best of all, the scales were pre scratched by mags. :whistle:
So I don't feel guilty!
I scratched them special just for you Pabs. If you'da said, I would have pre-twisted the tools as well :pok:
I'm glad I didn't say anything then. :D
I'm liking The Master Opener more and more. :climber:
:hatsoff: :like:
Is it a bit much though? Master Opener implies that it has everything opening related? :think:
ChildsafeSoldier?
What's missing to make it a master opener??
A combo tool? :rofl:
I was thinking of opener as including screwdrivers and such. :think:
But I suppose a more narrow definition of opener makes it fit after all. :tu:
Master Opener. :like:
On the bad side, another subject, this Master Opener is making me want a Pioneer now. :facepalm:
I can get a silver one on Amazon, but I was thinking of a red pioneer. What do you think? Where can I get one?
-
I got a black pioneer on amazon a couple of years ago, think they still have them
-
Black vs Red vs Silver? :think:
Too many choices.... :ahhh
-
.... Don't think so Doug - Didn't Def say earlier in this thread that it is one hundred and only one hundred of these ....
You are correct on both counts, but it was also a minimum of 100 for Victorinox to make them for us........
Ah - Got it Doug - Thanks - You were sayng that was the minimum we would be able to order from Vic.
Hey Folks - Just thinking - If anyone is expecting these before Christmas - I think they should lower their expectations......
The order is only due to be placed next week
Vic then have to make them - Production Lead Time .... And we have already heard that things move slowly at Vic
They then have to ship to Canada - International Shiping
Then Def has to pick, pack, and ship 80-100 orders all over the world - More International Shiping
Can see all this completing before Christmas !! Certainly not to Oz !! :(
-
Have you thought about changing your profile name to Eeyore? :pok: :D
-
.... Don't think so Doug - Didn't Def say earlier in this thread that it is one hundred and only one hundred of these ....
You are correct on both counts, but it was also a minimum of 100 for Victorinox to make them for us........
Ah - Got it Doug - Thanks - You were sayng that was the minimum we would be able to order from Vic.
Hey Folks - Just thinking - If anyone is expecting these before Christmas - I think they should lower their expectations......
The order is only due to be placed next week
Vic then have to make them - Production Lead Time .... And we have already heard that things move slowly at Vic
They then have to ship to Canada - International Shiping
Then Def has to pick, pack, and ship 80-100 orders all over the world - More International Shiping
Can see all this completing before Christmas !! Certainly not to Oz !! :(
If you look back through the thread I think you might be surprised to find the order was placed last week anf Def is trying to have it expadited. The possibilities I guess to be 50/50. The one sure thing is we will all have a piece of MTO/Victorinox history in our hands, so who cares if it is before or after Christmas.
WE MADE HISTORY!! HOW COOL IS THAT?
-
And we're making a knife! :viking:
:MTO:
-
And we're making a knife! :viking:
:MTO:
:tu: :tu:
Can't argue with that!
IT'S EVEN :MTO: STYLE :tu: :tu:
-
Have you thought about changing your profile name to Eeyore? :pok: :D
I am not a pessimist - Just a realistic optimist and I know folks were wanting it for Christmas
And I am a Brit: Conservative, cautious, negative, low energy, expects to loose .... And you are an American - Ever positive, upbeat, enthusiastic, expects to win ;)
Ooops - Got political again :twak: :twak:
Doug - I had not realised that - Great news - I thought I had read somewhere it would be placed on the 20th - Let's see how we go :tu: :D
-
Have you thought about changing your profile name to Eeyore? :pok: :D
I am not a pessimist - Just a realistic optimist and I know folks were wanting it for Christmas
And I am a Brit: Conservative, cautious, negative, low energy, expects to loose .... And you are an American - Ever positive, upbeat, enthusiastic, expects to win ;)
Ooops - Got political again :twak: :twak:
Doug - I had not realised that - Great news - I thought I had read somewhere it would be placed on the 20th - Let's see how we go :tu: :D
It's ok we understand. You Oz'ies are stilll upset Dorthy got to come home and the Wizard flew off in a hot air balloon and left you with that stink'n yellow brick road. ( some body insert GIF here ) We forgive you. We'ld be upset too. :whistle:
-
Oh forgot to add you were right again. The 20th was the original plan. You guys are so awesome and ordered so many so fast Def bumped up the order He couldn't pass up the chance to try his hand at being St. Nick. :climber:
-
Only 14 left this morning :climber:
-
Have you thought about changing your profile name to Eeyore? :pok: :D
I am not a pessimist - Just a realistic optimist and I know folks were wanting it for Christmas
And I am a Brit: Conservative, cautious, negative, low energy, expects to loose .... And you are an American - Ever positive, upbeat, enthusiastic, expects to win ;)
Ooops - Got political again :twak: :twak:
Doug - I had not realised that - Great news - I thought I had read somewhere it would be placed on the 20th - Let's see how we go :tu: :D
Brits to a tee Huntsman! :salute: I would love to be less cynical but life keeps giving me points for it :D
The difference between Americans and Brits is shown eloquently with the two versions of 'The Office'. All you need to know about how we are so different.
-
I know its too late, but wish they were numbered on the engraving area, 1/100 etc, that would have been sweet
-
Hello... thanks for the email reminder about this! Life had got shockingly in the way and I would have missed this without it! Ordered mine 14 or so hours ago. Cheers!
-
.... Don't think so Doug - Didn't Def say earlier in this thread that it is one hundred and only one hundred of these ....
You are correct on both counts, but it was also a minimum of 100 for Victorinox to make them for us........
Ah - Got it Doug - Thanks - You were sayng that was the minimum we would be able to order from Vic.
Hey Folks - Just thinking - If anyone is expecting these before Christmas - I think they should lower their expectations......
The order is only due to be placed next week
Vic then have to make them - Production Lead Time .... And we have already heard that things move slowly at Vic
They then have to ship to Canada - International Shiping
Then Def has to pick, pack, and ship 80-100 orders all over the world - More International Shiping
Can see all this completing before Christmas !! Certainly not to Oz !! :(
If you look back through the thread I think you might be surprised to find the order was placed last week anf Def is trying to have it expadited. The possibilities I guess to be 50/50. The one sure thing is we will all have a piece of MTO/Victorinox history in our hands, so who cares if it is before or after Christmas.
WE MADE HISTORY!! HOW COOL IS THAT?
It's very cool I'm glad I got one.
Proud SAKMC member :)
-
The difference between Americans and Brits is shown eloquently with the two versions of 'The Office'. All you need to know about how we are so different.
Don't beat yourself up! :pok:
Jk, own and love them both.
And Eeyore is my favorite creature in the hundred acre wood. :cheers:
And I've met a lot of positive brits!!!
-
The difference between Americans and Brits is shown eloquently with the two versions of 'The Office'. All you need to know about how we are so different.
Don't beat yourself up! :pok:
Jk, own and love them both.
And Eeyore is my favorite creature in the hundred acre wood. :cheers:
And I've met a lot of positive brits!!!
Yep, it's true they do exist. Though most of us contentedly like to remind everyone that the glass is half empty in the hope someone will top it up .... and do well at pooh sticks :cheers:
-
Well it's today is day 13 sense the anouncement and out of 100 to start we only have 13 left in the store. That means 87 sold in just 13 days. WOW you guys are awesome.
Now Nix that also means we left you 13 so get your wallet out and get'm gone. :pok: :pok: :rofl:
-
(http://www.pic4ever.com/images/meditationf.gif)
-
Make that 88 sold!
:gimme:
-
(http://www.pic4ever.com/images/meditationf.gif)
:like: :rofl: :rofl: :rofl:
-
Make that 88 sold!
:gimme:
:salute: :tu:
-
Make that 88 sold!
:gimme:
:salute: :tu:
It's kind of funny, I don't really need the scissors and so a pioneer has been my edc for a long time now. Also don't like shelf Queens. For some reason I'm really excited about this one. Thanks for helping to make it happen! :cheers:
-
Well. I tried to ignore this for long enough. Got an extra day at work this week for catch-up and had a few extra bucks. I have one ordered now. Kind of hoped they'd be sold out before the money went into my account, but maybe it was meant to be I was able to order one. One more day and I may have not gotten one. So, hopefully I am not disappointed with a $66 SAK. Three times more than I've ever paid for a SAK in my life. :ahhh :ahhh :ahhh
-
Guys,
Thanks for all the support from everyone. This has been a special project for me from the first anouncement by Def back in June. The project almost died but really took on a life of it's own when many of you responded to my first poll. Then even more to the second poll. Now it realy has grown far beyond any expectations I had then, all thanks to each of you. You have all made this a truely amazing endeavor. My PX will always be a symbol of just how great people can be. All it takes is finding a little common ground and CHOOSING to come together and make some thing positive happen. We are a group from all over the globe, with differant life experiances, differant goals, differant politics and the list of differances could go on for ever, yet we CHOOSE to come together. We share, we respect, we include, we joke, we jab, and in the end we fellowship. Our differances don't matter it's our common ground and RESPECT that drive us. I hope that each of you also find a special reason to be proud of what we have here and can spread a little of it every where you go.
Thanks Def for getting this "place" going, keeping it going, and all the sacrifice it takes.
Douglas
-
Guys,
Thanks for all the support from everyone. This has been a special project for me from the first anouncement by Def back in June. The project almost died but really took on a life of it's own when many of you responded to my first poll. Then even more to the second poll. Now it realy has grown far beyond any expectations I had then, all thanks to each of you. You have all made this a truely amazing endeavor. My PX will always be a symbol of just how great people can be. All it takes is finding a little common ground and CHOOSING to come together and make some thing positive happen. We are a group from all over the globe, with differant life experiances, differant goals, differant politics and the list of differances could go on for ever, yet we CHOOSE to come together. We share, we respect, we include, we joke, we jab, and in the end we fellowship. Our differances don't matter it's our common ground and RESPECT that drive us. I hope that each of you also find a special reason to be proud of what we have here and can spread a little of it every where you go.
Thanks Def for getting this "place" going, keeping it going, and all the sacrifice it takes.
Douglas
What he said :hatsoff:
-
+1
-
Only 10 left this morning :ahhh :ahhh
-
Guys,
Thanks for all the support from everyone. This has been a special project for me from the first anouncement by Def back in June. The project almost died but really took on a life of it's own when many of you responded to my first poll. Then even more to the second poll. Now it realy has grown far beyond any expectations I had then, all thanks to each of you. You have all made this a truely amazing endeavor. My PX will always be a symbol of just how great people can be. All it takes is finding a little common ground and CHOOSING to come together and make some thing positive happen. We are a group from all over the globe, with differant life experiances, differant goals, differant politics and the list of differances could go on for ever, yet we CHOOSE to come together. We share, we respect, we include, we joke, we jab, and in the end we fellowship. Our differances don't matter it's our common ground and RESPECT that drive us. I hope that each of you also find a special reason to be proud of what we have here and can spread a little of it every where you go.
Thanks Def for getting this "place" going, keeping it going, and all the sacrifice it takes.
Douglas
Proud papa...........yip.......... :climber:
-
Very eloquently and well said Douglas!
The MT.o Pioneer X will be the "Lord of the Saks!" :viking:
]One Sak to rule them all, One Sak to find them, One Sak to bring them all and in the MT.o forum bind them.
-
(https://i.imgflip.com/1zhini.jpg) (https://imgflip.com/i/1zhini)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
-
Here's the link one more time. Remember today is your last chance for the discount.
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html
-
....and that's nine (9) remaining.... :whistle: :climber: :cheers:
:MTO:
-
....and that's nine (9) remaining.... :whistle: :climber: :cheers:
:MTO:
:like: :like:
About Time.
NOW Get some more for MOD FOD.... :whistle: :pok: :pok:
-
Sure would be cool to see
SOLD OUT
By the end of the day.
:pok: :pok:
-
Agreed.
I don't see these two (2) getting mod'd. These are part of a bigger project and need to stay as they are, in my humble opinion. They will be used however.
(http://www.pic4ever.com/images/budo.gif)
-
Hey, as it is there are....
ONLY NINE (9) REMAINING!
Y'all have been given fair warning! (http://www.pic4ever.com/images/snoozer_08.gif)
-
do we have to wait until we receive them to request MTO badge?
-
Ha Ha - Good Point - I like it Blackbeard
And I reckon we get two badges for this one transaction - :ahhh MTo store user and MTo branded tool user/collector
However most of the badge awarding criteria say : 'Start a thread with ...... '
Let's see what the bosses say
-
Sheeesh! Earlier I said there were nine (9) remaining. I was wrong! There are....
ONLY SEVEN (7) REMAINING!
-
Sheeesh! Earlier I said there were nine (9) remaining. I was wrong! There are....
ONLY SEVEN (7) REMAINING!
Seven is my favourite number... but unfortunately I can't act on it at this time.
-
Sheeesh! Earlier I said there were nine (9) remaining. I was wrong! There are....
ONLY SEVEN (7) REMAINING!
Seven is my favourite number... but unfortunately I can't act on it at this time.
I'm sure Def can hold one back for you untill times change ;)
-
Sheeesh! Earlier I said there were nine (9) remaining. I was wrong! There are....
ONLY SEVEN (7) REMAINING!
Seven is my favourite number... but unfortunately I can't act on it at this time.
I'm sure Def can hold one back for you untill times change ;)
Yeah nar, I have daughters...
-
Sheeesh! Earlier I said there were nine (9) remaining. I was wrong! There are....
ONLY SEVEN (7) REMAINING!
Seven is my favourite number... but unfortunately I can't act on it at this time.
I'm sure Def can hold one back for you untill times change ;)
Yeah nar, I have daughters...
So what you're realy saying is you can't help yourself.... :whistle:
Aaaah... but Daddy (http://www.sherv.net/cm/emoticons/smile/flirty-smile-smiley-emoticon.gif) (http://www.sherv.net/) I need it....
Now if you could just find a way to turn it around on them :think:
-
Ha Ha - Good Point - I like it Blackbeard
And I reckon we get two badges for this one transaction - :ahhh MTo store user and MTo branded tool user/collector
However most of the badge awarding criteria say : 'Start a thread with ...... '
Let's see what the bosses say
Hmm, let's blow up the forum with 100 threads and 200 badge requests (maybe 3hundred : MTo S,MTo brd, and alox with scissors)
-
Ha Ha - Good Point - I like it Blackbeard
And I reckon we get two badges for this one transaction - :ahhh MTo store user and MTo branded tool user/collector
However most of the badge awarding criteria say : 'Start a thread with ...... '
Let's see what the bosses say
Hmm, let's blow up the forum with 100 threads and 200 badge requests (maybe 3hundred : MTo S,MTo brd, and alox with scissors)
but I already got 2 of those badges :D
-
Hmm, let's blow up the forum with 100 threads and 200 badge requests (maybe 3hundred : MTo S,MTo brd, and alox with scissors)
Let's simplify it: everybody, who wrote in this thread something like: "+1" / "Ordered" / "I'm in.." should automatically get these badges! :D
-
Works for me..... :angel:
-
+1
-
Then there could be a "phone it in" badge... or a "+1" badge for those motivationally challenged members who have demonstrated the unique ability of abstaining from making new threads and or expressing complete thoughts. :D
-
Then there could be a "phone it in" badge... or a "+1" badge for those motivationally challenged members who have demonstrated the unique ability of abstaining from making new threads and or expressing complete thoughts. :D
So, 4 badges instead of initial 3? Let it be... :cheers:
(and yes, I don't like to increase entropy)
-
Then there could be a "phone it in" badge... or a "+1" badge for those motivationally challenged members who have demonstrated the unique ability of abstaining from making new threads and or expressing complete thoughts. :D
So, 4 badges instead of initial 3? Let it be... :cheers:
(and yes, I don't like to increase entropy)
Hey I'm still trying to get another bowling entropy.......... :think:
-
Then there could be a "phone it in" badge... or a "+1" badge for those motivationally challenged members who have demonstrated the unique ability of abstaining from making new threads and or expressing complete thoughts. :D
I want that badge!
(if I don't have to work too hard at it) :P
-
Sheeesh! Earlier I said there were nine (9) remaining. I was wrong! There are....
ONLY SEVEN (7) REMAINING!
(https://i.pinimg.com/564x/ff/da/6a/ffda6a32a5a1387c001e46187f8ad944--the-final-countdown-work-memes.jpg)
-
Are these sold out yet, I'm sure I don't want one until they are being resold for triple. :facepalm:
-
Hmm, let's blow up the forum with 100 threads and 200 badge requests (maybe 3hundred : MTo S,MTo brd, and alox with scissors)
Let's simplify it: everybody, who wrote in this thread something like: "+1" / "Ordered" / "I'm in.." should automatically get these badges! :D
I think everyone should have to post a photo, but anywhere on MTO rather than starting new threads. Flood the old threads with pics of the MTO PX :D
-
Hmm, let's blow up the forum with 100 threads and 200 badge requests (maybe 3hundred : MTo S,MTo brd, and alox with scissors)
Let's simplify it: everybody, who wrote in this thread something like: "+1" / "Ordered" / "I'm in.." should automatically get these badges! :D
I think everyone should have to post a photo, but anywhere on MTO rather than starting new threads. Flood the old threads with pics of the MTO PX :D
+1
-
I am glad this is has work out great for guys! You guys like some before you, are making history. Good work Ladies and Gentleman.
:salute:
-
Well...not too late.....there are....
Seven ( 7 ) MTo PX's available!
MultiTool of the Year 2016 (https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html)
-
Are these sold out yet, I'm sure I don't want one until they are being resold for triple. :facepalm:
That was my main reason to buy one!
-
Hmm, let's blow up the forum with 100 threads and 200 badge requests (maybe 3hundred : MTo S,MTo brd, and alox with scissors)
Let's simplify it: everybody, who wrote in this thread something like: "+1" / "Ordered" / "I'm in.." should automatically get these badges! :D
I think everyone should have to post a photo, but anywhere on MTO rather than starting new threads. Flood the old threads with pics of the MTO PX :D
zoidberg needs to get busy with these automatic badge rewards and stop posting pics of mystery items I can't figure out :pok: :rofl:
Maybe we can make it easier on him, copy and paste your name in the list for the 2 MTO badges:
1 - Blackbeard
-
Hmm, let's blow up the forum with 100 threads and 200 badge requests (maybe 3hundred : MTo S,MTo brd, and alox with scissors)
Let's simplify it: everybody, who wrote in this thread something like: "+1" / "Ordered" / "I'm in.." should automatically get these badges! :D
I think everyone should have to post a photo, but anywhere on MTO rather than starting new threads. Flood the old threads with pics of the MTO PX :D
zoidberg needs to get busy with these automatic badge rewards and stop posting pics of mystery items I can't figure out :pok: :rofl:
Maybe we can make it easier on him, copy and paste your name in the list for the 2 MTO badges:
1 - Blackbeard
1 - Blackbeard
2- Butch
-
Smurf yes, a list would be great. :tu: :like:
-
1 - Blackbeard
2- Butch
3- El Corkscrew
:D
-
1 - Blackbeard
2- Butch
3- El Corkscrew
4 - Nix
-
1 - Blackbeard
2- Butch
3- El Corkscrew
4 - Nix
5 - Douglas
-
Could be a few ocd badges up for grabs here too. :whistle:
-
1 - Blackbeard
2- Butch
3- El Corkscrew
4 - Nix
5 - Douglas
6 - italophil
-
Could be a few ocd badges up for grabs here too. :whistle:
:gimme: :gimme: :gimme:
-
1 - Blackbeard
2- Butch
3- El Corkscrew
4 - Nix
5 - Douglas
6 - italophil
7 - T14
-
Could be a few ocd badges up for grabs here too. :whistle:
And alox+scissors ?
1 - Blackbeard
2- Butch
3- El Corkscrew
4 - Nix
5 - Douglas
6 - italophil
7 - T14
92 - m47mu74nt
-
And alox+scissors ?
Sure.
-
1 - Blackbeard
2- Butch
3- Douglas
4 - El Corkscrew
5 - gustophersmob
6 - italophil
7 - m47mu74nt
8 - Nix
9 - T14
Does this qualify me for the OCD badge?
-
1 - Blackbeard
2- Butch
3- Douglas
4 - El Corkscrew
5 - gustophersmob
6 - italophil
7 - m47mu74nt
8 - Nix
9 - T14
10 - Huntsman
We just love our lists - don't we :tu:
-
1 - Blackbeard
2- Butch
3- Douglas
4 - El Corkscrew
5 - gustophersmob
6 - italophil
7 - m47mu74nt
8 - Nix
9 - T14
10 - Huntsman
11 - gerleatherberman
The MT.o Pioneer X must be one of the world's most anticipated upcoming items. :climber:
-
1 - Blackbeard
2- Butch
3- Douglas
4 - El Corkscrew
5 - gustophersmob
6 - italophil
7 - m47mu74nt
8 - Nix
9 - T14
10 - Huntsman
11 - gerleatherberman
12. - redmond
-
1 - Blackbeard
2- Butch
3- Douglas
4 - El Corkscrew
5 - gustophersmob
6 - italophil
7 - m47mu74nt
8 - Nix
9 - T14
Does this qualify me for the OCD badge?
Nope, it still has un ocd stuff. Try again if you like.
-
1 - Blackbeard
2- Butch
3- Douglas
4 - El Corkscrew
5 - gustophersmob
6 - italophil
7 - m47mu74nt
8 - Nix
9 - T14
Does this qualify me for the OCD badge?
Nope, it still has un ocd stuff. Try again if you like.
:think:
-
Let's try again, didn't see those missed spaces before. This is a pain on a phone...
01 - Blackbeard
02 - Butch
03 - Douglas
04 - El Corkscrew
05 - gerleatherberman
06 - gustophersmob
07 - Huntsman
08 - italophil
09 - m47mu74nt
10 - Nix
11 - redmond
12 - T14
-
I am not sure if correcting minor text issues should qualify as OCD badge worthy. I earned mine the hard way by arranging extensive amounts of knives and tools by size-length down to 1/20th of an inch. Sitting around correcting grammatical errors and reordering some text seems a bit too easy. ::)
-
I am not sure if correcting minor text issues should qualify as OCD badge worthy. I earned mine the hard way by arranging extensive amounts of knives and tools by size-length down to 1/20th of an inch. Sitting around correcting grammatical errors and reordering some text seems a bit too easy. ::)
Based on other OCD badge awards, I thought that list editing was the primary way to get it.
-
Let's try again, didn't see those missed spaces before. This is a pain on a phone...
01 - Blackbeard
02 - Butch
03 - Douglas
04 - El Corkscrew
05 - gerleatherberman
06 - gustophersmob
07 - Huntsman
08 - italophil
09 - m47mu74nt
10 - Nix
11 - redmond
12 - T14
Closer, issue is the next person added onto the list will probably not be alphabetical... :shrug:
-
I am not sure if correcting minor text issues should qualify as OCD badge worthy. I earned mine the hard way by arranging extensive amounts of knives and tools by size-length down to 1/20th of an inch. Sitting around correcting grammatical errors and reordering some text seems a bit too easy. ::)
Based on other OCD badge awards, I thought that list editing was the primary way to get it.
Correct, it was created just for that. :tu: :like:
-
Let's try again, didn't see those missed spaces before. This is a pain on a phone...
01 - Blackbeard
02 - Butch
03 - Douglas
04 - El Corkscrew
05 - gerleatherberman
06 - gustophersmob
07 - Huntsman
08 - italophil
09 - m47mu74nt
10 - Nix
11 - redmond
12 - T14
Closer, issue is the next person added onto the list will probably not be alphabetical... :shrug:
I guess I must not be OCD enough, I can't think of how to control for that in a textual list. Spreadsheet, sure, but I don't care enough to do that.
Maybe after everyone's put their name on the list?
-
That list is limited to twelve entries so far. The lists I see that are awarded the OCD badge are vastly more complicated with extensive entries and impeccable reordering.
Just sayin'. :ahhh
-
Not to derail the derailed, but I for one am excited to be one of the future recipients of an MT.o branded Victorinox Pioneer X! :drool:
-
Not to derail the derailed, but I for one am excited to be one of the future recipients of an MT.o branded Victorinox Pioneer X! :drool:
:like: +1
-
I'll just leave this here...
02 - Butch
01 - Blackbeard
03 - El Corkscrew
04 - Nix
05 - Douglas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
-
02 - Butch
01 - Blackbeard
03 - El Corkscrew
04 - Nix
05 - Douglas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
Proud SAKMC member :)
-
01 - Blackbeard
02 - Butch
03 - Douglas
04 - El Corkscrew
05 - gerleatherberman
06 - gustophersmob
07 - Huntsman
08 - italophil
09 - m47mu74nt
10 - Monrogue
11 - Nix
12 - redmond
13 - T14
-
01 - Blackbeard
02 - Butch
03 - Douglas
04 - El Corkscrew
05 - gerleatherberman
06 - gustophersmob
07 - Huntsman
08 - italophil
09 - m47mu74nt
10 - Monrogue
11 - Nix
12 - redmond
13 - T14
And this should be OCD worthy
-
01 - Blackbeard
02 - Butch
03 - Douglas
04 - El Corkscrew
05 - gerleatherberman
06 - gustophersmob
07 - Huntsman
08 - italophil
09 - m47mu74nt
10 - Monrogue
11 - Nix
12 - redmond
13 - T14
And this should be OCD worthy
Okay so now this should do it. :whistle:
-
01 - Blackbeard
02 - Butch
03 - Douglas
04 - El Corkscrew
05 - gerleatherberman
06 - gustophersmob
07 - Huntsman
08 - italophil
09 - m47mu74nt
10 - Monrogue
11 - Nix
12 - redmond
13 - T14
And this should be OCD worthy
Okay so now this should do it. :whistle:
You got the hint but then you smurfed it up again. :twak: Stop over thinking it yall. :facepalm:
-
what about the capital letters? still needs work :rofl:
-
what about the capital letters? still needs work :rofl:
Thought of that, but then you would be misspelling the names. Many of them are with lower case fist letters, presumably by choice/ intentionaly.
-
what about the capital letters? still needs work :rofl:
Thought of that, but then you would be misspelling the names. Many of them are with lower case fist letters, presumably by choice/ intentionaly.
good point. I think if you really want that ocd badge you need to extract all the buyers from the thread and put them in the list, have fun :rofl:
JK, you did enough for this awesome tool already, have a beer instead
-
Instead of creating dozens of new threads with awards' requests, we've started to create and re-create lists of users.
Maybe will be better to use for this purpose something more specific? I've just created a short survey (using Google forms).
https://goo.gl/forms/5hkltUM1T3tJypeC2
Please find a minute a fill it with your responces. I think, it will be more efficient later to grab all answers there.
What do you think about this proposal?
-
what about the capital letters? still needs work :rofl:
Thought of that, but then you would be misspelling the names. Many of them are with lower case fist letters, presumably by choice/ intentionaly.
good point. I think if you really want that ocd badge you need to extract all the buyers from the thread and put them in the list, have fun :rofl:
JK, you did enough for this awesome tool already, have a beer instead
Sounds like a challenge. I think I'm going to pass for tonight though. I have to run calls in a few hours and still have to complete a research test for class so I'm going to call it a night. :salute:
-
Sigh.
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
-
Instead of creating dozens of new threads with awards' requests, we've started to create and re-create lists of users.
Maybe will be better to use for this purpose something more specific? I've just created a short survey (using Google forms).
https://goo.gl/forms/5hkltUM1T3tJypeC2
Please find a minute a fill it with your responces. I think, it will be more efficient later to grab all answers there.
What do you think about this proposal?
Where's the fun in that? :think: :shrug:
-
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
-
OH, one last post for tonight...
:pok: :pok:
GO HERE
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html
AND ORDER.
There are still 7 to sell. Buy one for a friend, coworker, family member, stranger, Grandma, I don't know who, :facepalm: just buy more. :twak:
-
what about the capital letters? still needs work :rofl:
Thought of that, but then you would be misspelling the names. Many of them are with lower case fist letters, presumably by choice/ intentionaly.
Exactly !
-
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
:MTO:
-
Maybe I'll get some sleep, sometime.
One more idea how about every one put your country next to your name. It would be cool to see where all of these are going in a list format. Then we could create a pin map for where they went that could be printed to go with it.
I'll start it.
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
-
Maybe I'll get some sleep, sometime.
One more idea how about every one put your country next to your name. It would be cool to see where all of these are going in a list format. Then we could create a pin map for where they went that could be printed to go with it.
I'll start it.
Show content
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
CSV-like format then, for easy import :
nB;userName;country;state;
01;Blackbeard;;;
02;Butch;;;
03;El Corkscrew;;;
04;Nix;;;
05;Douglas;USA;Texas;
06;italophil;;;
07;T14;;;
08;m47mu74nt;France;;
09;gustophersmob;;;
10;Huntsman;;;
11;gerleatherberman;;;
12;redmond;;;
13;Monrogue;;;
14;Fast Bill;;;
15;koke;;;
or
nB;userName;country;
01;Blackbeard;;
02;Butch;;
03;El Corkscrew;;
04;Nix;;
05;Douglas;USA, Texas;
06;italophil;;
07;T14;;
08;m47mu74nt;France;
09;gustophersmob;;
10;Huntsman;;
11;gerleatherberman;;
12;redmond;;
13;Monrogue;;
14;Fast Bill;;
15;koke;;
-
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
-
I've already got 2 of the badges but I'll add my name for the alox+scissors badge
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
-
Badges? we do need stinking badges(3 please) misquote from classic film "The treasure of the sierra madre"
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
-
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
18 - Dutch_Tooler (Germany)
-
01;Blackbeard;;
02;Butch;;
03;El Corkscrew;;
04;Nix;;
05;Douglas;USA, Texas;
06;italophil;;
07;T14;;
08;m47mu74nt;France;
09;gustophersmob;;
10;Huntsman;;
11;gerleatherberman;;
12;redmond;;
13;Monrogue;;
14;Fast Bill;;
15;koke;;
16;Mechanickal;;
17;Kev Davey;;
18;Dutch_Tooler;Germany;
-
01 - Blackbeard
02 - Butch 433 miles north of the Alamo
03 - El Corkscrew
04 - Nix
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
-
01 - Blackbeard
02 - Butch
03 - Douglas
04 - El Corkscrew
05 - gerleatherberman
06 - gustophersmob
07 - Huntsman
08 - italophil
09 - m47mu74nt
10 - Monrogue
11 - Nix
12 - redmond
13 - T14
And this should be OCD worthy
Okay so now this should do it. :whistle:
You got the hint but then you smurfed it up again. :twak: Stop over thinking it yall. :facepalm:
Well, I've got to admit I have no idea what I'm supposed to do to get this badge now. Looking at past threads where it has been awarded, it seems it was a combination of alphabetizing and formatting.
I think I must be over thinking your hints, but I can't figure it out.
Edit: OK, I get it now. I'll keep an eye out in case someone smurfs the list up again
-
That list is limited to twelve entries so far. The lists I see that are awarded the OCD badge are vastly more complicated with extensive entries and impeccable reordering.
Just sayin'. :ahhh
Um, OK. Just trying to follow the rules/ hints. :shrug:
-
01 - Blackbeard
02 - Butch - USA, Texas
03 - El Corkscrew
04 - Nix
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob - USA, Ohio
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
18 - Dutch_Tooler - Germany
FTFY
-
Were we supposed to include our location? ???
I added mine, just for fun.
01 - Blackbeard
02 - Butch - USA, Texas
03 - El Corkscrew
04 Nix - USA Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob - USA, Ohio
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
18 - Dutch_Tooler - Germany
-
Were we supposed to include our location? ???
I added mine, just for fun.
01 - Blackbeard
02 - Butch - USA, Texas
03 - El Corkscrew
04 Nix - USA Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob - USA, Ohio
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
18 - Dutch_Tooler - Germany
you got it right. It's JUST FOR FUN. :tu:
-
Just another reminder. :pok:
There are only 2 1/2 days left to get one or all of the last remaining 7 MTo Red PX's with the current discount.
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html
-
Y U no keep my location ???
01;Blackbeard;;
02;Butch;USA, Texas;
03;El Corkscrew;;
04;Nix;USA Montana;
05;Douglas;USA, Texas;
06;italophil;;
07;T14;;
08;m47mu74nt;France;
09;gustophersmob;USA, Ohio;
10;Huntsman;;
11;gerleatherberman;;
12;redmond;;
13;Monrogue;;
14;Fast Bill;;
15;koke;;
16;Mechanickal;;
17;Kev Davey;;
18;Dutch_Tooler;Germany;
PS: with [ code] [/ code] tags you can simply click to select to make sure you won't miss anything in selection :)
PS: i apologize for my CSV semi-colon separator OCD.
-
Y U no keep my location ???
"France" is kinda of a big place and sort of vague. Where in France? Normandy? Provence? Occitanie?
Où en France êtes-vous?
-
Y U no keep my location ???
"France" is kinda of a big place and sort of vague. Where in France? Normandy? Provence? Occitanie?
Où en France êtes-vous?
Are you kidding? Texas is bigger than France!
-
Y U no keep my location ???
"France" is kinda of a big place and sort of vague. Where in France? Normandy? Provence? Occitanie?
Où en France êtes-vous?
Are you kidding? Texas is bigger than France!
that's exactly what I was writing, by saying France I am a hair more precise than what Douglas said xD
btw I live both in Western, Center France, and near Paris :)
-
Fair point. :D
-
01;Blackbeard;;
02;Butch;USA, Texas;
03;El Corkscrew;;
04;Nix;USA Montana;
05;Douglas;USA, Texas;
06;italophil;;
07;T14;Denmark;
08;m47mu74nt;France;
09;gustophersmob;USA, Ohio;
10;Huntsman;;
11;gerleatherberman;;
12;redmond;;
13;Monrogue;;
14;Fast Bill;;
15;koke;;
16;Mechanickal;;
17;Kev Davey;;
18;Dutch_Tooler;Germany;
-
Y U no keep my location ???
"France" is kinda of a big place and sort of vague. Where in France? Normandy? Provence? Occitanie?
Où en France êtes-vous?
Are you kidding? Texas is bigger than France!
I was about to say: Look who's talking. :pok:
:rofl:
But I see you beat me. :D
-
The Netherlands would fit into Texas 16.75 times, approximately.
-
So are you going to ask Roland where in the Netherlands he lives then? :whistle:
-
Like which street he lives on?
:pok:
-
Hey, the Netherlands is 17 times bigger than my home state. At least in terms of population..... :cheers:
-
In terms of land area:
Roland told us he lives in the Netherlands, which are so small, it is practically the equivalent of you telling us what town in Montana you live in. :P
-
(https://i.imgflip.com/1zm2yi.jpg) (https://imgflip.com/i/1zm2yi)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
-
Either the Netherlands really knows how to cram people together in a small space, or Montana has a population deficit. :o
The is enough land in the Netherlands for each person living there to have a 0.6 acre garden, not enough for growing food to support themselves.
In Montana, it is 100 acres per person. :ahhh
-
We do have a little space here.
But look how complex the Netherlands are:
(http://i.imgur.com/QYzBR8r.jpg)
Now it seems like we do need to know where Ronald lives.
-
:rofl:
I´m in the northeast of the Catholic Carnival country. This is the province where we grow our marihuana.
-
Now, that sounds like more fun than a rodeo! :drink:
-
Here Ya'll go Boys n Girls
(http://3.bp.blogspot.com/-K0bKul56FVo/VgtU4Zat9KI/AAAAAAAACOU/gUaDu8Z8qJk/s1600/Texas%2Bcompared%2Bto%2BEuropean%2Bcountries.jpg)
(https://i.pinimg.com/736x/4d/a2/08/4da208c716b5ec0e0afe122387979360--texas-forever-texas-pride.jpg)
:tu:
-
cute state:
(http://4.bp.blogspot.com/-tc55PVrK0Bk/U-rXBp0StOI/AAAAAAAAs28/gUXcfR0OvvU/s1600/DSC_9450.JPG)
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew
04 Nix - USA Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
18 - Dutch_Tooler - Germany
-
Here Ya'll go Boys n Girls
(http://3.bp.blogspot.com/-K0bKul56FVo/VgtU4Zat9KI/AAAAAAAACOU/gUaDu8Z8qJk/s1600/Texas%2Bcompared%2Bto%2BEuropean%2Bcountries.jpg)
(https://i.pinimg.com/736x/4d/a2/08/4da208c716b5ec0e0afe122387979360--texas-forever-texas-pride.jpg)
:tu:
Oh my God..... It's full of Texans! :o
cute state:
(http://4.bp.blogspot.com/-tc55PVrK0Bk/U-rXBp0StOI/AAAAAAAAs28/gUXcfR0OvvU/s1600/DSC_9450.JPG)
(http://1.bp.blogspot.com/-sBLTe8K-nEU/VC4JpxkuTsI/AAAAAAAAJ5M/-Saju4NRaIU/s1600/day%2B3%2Bgraphic.jpg)
Price for NY sized beer: One Nickel
Price for Texan sized beer: $3
Price for Alaskan sized beer(entire keg?): $7
-
01;Blackbeard;;
02;Butch;USA, Texas;
03;El Corkscrew;;
04;Nix;USA Montana;
05;Douglas;USA, Texas;
06;italophil;;
07;T14;Denmark;
08;m47mu74nt;France;
09;gustophersmob;USA, Ohio;
10;Huntsman;;
11;gerleatherberman;;
12;redmond;;
13;Monrogue;;
14;Fast Bill;;
15;koke;;
16;Mechanickal;;
17;Kev Davey;;
18;Dutch_Tooler;Germany
19;smiller43147;USA, Ohio;
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew
04 Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
18 - Dutch_Tooler - Germany
FTFY
-
01;Blackbeard;;
02;Butch;USA, Texas;
03;El Corkscrew;;
04;Nix;USA, Montana;
05;Douglas;USA, Texas;
06;italophil;;
07;T14;Denmark;
08;m47mu74nt;France;
09;gustophersmob;USA, Ohio;
10;Huntsman;;
11;gerleatherberman;;
12;redmond;;
13;Monrogue;;
14;Fast Bill;;
15;koke;;
16;Mechanickal;;
17;Kev Davey;;
18;Dutch_Tooler;Germany
19;smiller43147;USA, Ohio;
FTFY
-
Either the Netherlands really knows how to cram people together in a small space, or Montana has a population deficit. :o
The is enough land in the Netherlands for each person living there to have a 0.6 acre garden, not enough for growing food to support themselves.
In Montana, it is 100 acres per person. :ahhh
True, but have you been to Montana? I was born there and it's a good place to be from. :D :D :D
-
Either the Netherlands really knows how to cram people together in a small space, or Montana has a population deficit. :o
The is enough land in the Netherlands for each person living there to have a 0.6 acre garden, not enough for growing food to support themselves.
In Montana, it is 100 acres per person. :ahhh
True, but have you been to Montana? I was born there and it's a good place to be from. :D :D :D
I don't remember ever having the pleasure of visiting. :(
Maybe sometime in the future. :cheers:
-
I´d love to have 100 acres of my own. (100 acres equal just over 40 hectare, or about 80 soccer pitches).
-
Move to Montana? ??? :pok:
It's a pity that it's not as green as the Netherlands/UK/Ireland though. :twak:
-
True, but have you been to Montana? I was born there and it's a good place to be from. :D :D :D
So true. Everyone goes to California. California is much, much better. Dream place to live, or so I hear. But, I encourage everyone to move to California. I've heard it's a paradise. I'd go myself but I'm stuck here. Still it always a good idea to pass on good advice, and so, California, yeah, that's where you want to be. No doubt about it. Beautiful beaches and people. Lovely food and mountains. GReat culture and sunsets. Oh, California is pure heaven. And they have wine. You'd have to be a fool not to move to California.
-
Move to Montana? ??? :pok:
It's a pity that it's not as green as the Netherlands/UK/Ireland though. :twak:
Green? Sure it's green for the entire Spring weekend. Beforehand it's white, then it's brown. It's an ugly state with grumpy people. And nothing to do.
But I have heard California is great. Y'all should check out California.
-
So... Do you like California? :whistle:
-
So... Do you like California? :whistle:
Let's just say I couldn't get back to Texas fast enough when I visited several years ago.
California had more Nuts running around loose than a Texas Pecan tree has in November... Besides they don't even know how to put ice in Iced Water. One cube for a whole quart of water (that's 946.353 ml for the rest of the world). :whistle:
-
High time for one of these....
-
True, but have you been to Montana? I was born there and it's a good place to be from. :D :D :D
So true. Everyone goes to California. California is much, much better. Dream place to live, or so I hear. But, I encourage everyone to move to California. I've heard it's a paradise. I'd go myself but I'm stuck here. Still it always a good idea to pass on good advice, and so, California, yeah, that's where you want to be. No doubt about it. Beautiful beaches and people. Lovely food and mountains. GReat culture and sunsets. Oh, California is pure heaven. And they have wine. You'd have to be a fool not to move to California.
Gonna disagree there Nix, lived there for the first 45 years of my life. It's super expensive, over regulated, over populated, and filled with power tripping bureaucrats who want to tell everyone how to live. I got tired of it, it just ain't all that. Maybe a nice place to visit, you know the saying...
Sorry if that offends any Californians, but I am one, and it's true. :salute:
Or were you being sarcastic? :think: :rofl:
-
Don't let the little things distract you. It's pure heaven compared to Montana. They have movie stars and great tacos.
-
What's so bad about Montana? :rofl:
-
What's so bad about Montana? :rofl:
He's got to be joking Pabs. No way. :rofl:
-
New york city is the center of hell as far as i'm concerned, you cant even get the Pioneer X shipped to you there(from big retailers that is)
Is this a craphole d*** measuring thread now :rofl:
-
What's so bad about Montana? :rofl:
Hannah...
-
Don't let the little things distract you. It's pure heaven compared to Montana. They have movie stars and great tacos.
But everything in Cali gives you cancer... :facepalm:
-
What's so bad about Montana? :rofl:
Hannah...
Also a California commodity. :P :rofl:
-
Don't let the little things distract you. It's pure heaven compared to Montana. They have movie stars and great tacos.
But everything in Cali gives you cancer... :facepalm:
Just like everywhere else, they just point at it more. :P
-
Don't let the little things distract you. It's pure heaven compared to Montana. They have movie stars and great tacos.
But everything in Cali gives you cancer... :facepalm:
Just like everywhere else, they just point at it more. :P
I used to think some of those prop 65 warnings were fake internet things, but apparently they're very real :facepalm:
-
Don't let the little things distract you. It's pure heaven compared to Montana. They have movie stars and great tacos.
But everything in Cali gives you cancer... :facepalm:
Just like everywhere else, they just point at it more. :P
I used to think some of those prop 65 warnings were fake internet things, but apparently they're very real :facepalm:
:facepalm: :facepalm:
-
Edit csb
-
Now back to topic for a moment.
We STILL have seven (7) MTo PX's left in the store.
I know we all have ours on the way. So as you post please spread the link around.
Possibly even make a donation to Zoid or another friend or family member so they can have one.
We are so close to sellng out it would be a SHAME not to.
So one MORE time here it is...
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html
-
Now back to topic for a moment.
We STILL have seven (7) MTo PX's left in the store.
I know we all have ours on the way. So as you post please spread the link around.
Possibly even make a donation to Zoid or another friend or family member so they can have one.
We are so close to sellng out it would be a SHAME not to.
So one MORE time here it is...
https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html
With as quickly as the others sold, I'm surprised these last 7 have stuck around so long. Come on folks, let's get these sold :pok:
-
Not to be a stickler for details, but there are only...
Six ( 6 ) MTo PX's available....
Linky: MultiTool of the Year 2016 (https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html)
-
Sorry about that I'm gonna delete that post
-
Sorry about that I'm gonna delete that post
It's ok buddy, I think you win, been there a few times myself, a nice place to visit again, but...
-
Not to be a stickler for details, but there are only...
Six ( 6 ) MTo PX's available....
Linky: MultiTool of the Year 2016 (https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html)
It will be nice to see them double in value once they're sold out. :tu:
-
Sorry about that I'm gonna delete that post
BB,
I'm sorry you felt rhe need to remove your post. I checked the link in it and found it to be confirmation of what so many in our country are trying to cover up. More of the truth needs to be exposed. Some times we need to be uncomfortable to realize what we need. Your story just goes to the point that over regulation most frequently hurts those it is said to protect. A little stiring the pot is required to keep things in perspective. :salute:
-
thanks guys, I just didn't want it taking away from the thread when your so close to selling out the X. theres a time and a place for everything, but I don't think this is it.
-
Down to 5.
KEEP spread'n the word... :pok: :pok: :pok:
-
5? Wow. I can count to five on one hand. :ahhh
-
5? Wow. I can count to five on one hand. :ahhh
I can even do it on one foot...might even be able to get all the way to twelve.
(That lame joke only works on this side of the pond) :ahhh
Hope the new owners remembered to get on the badge list...
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew
04 Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
18 - Dutch_Tooler - Germany
FTFY
Mov'n it forward.
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew
04 Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman
11 - gerleatherberman - USA, Alabama
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
18 - Dutch_Tooler - Germany
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew
04 Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman
11 - gerleatherberman - USA, Alabama
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew
04 Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman
11 - gerleatherberman - USA, Alabama
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA,??
04 Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond
13 - Monrogue - USA,??
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey - UK,??
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
Took the liberty of updating and fiddling with the list - Hope that's ok folks
.... Looks like half of the declared knives so far are going to the US ! Confirming the US love affair with the SAK :tu: :D
-
El C is in Arizona.
T14 in Denmark
koke in Spain
Mechanickal in Belgium
italophil, redmond and Fast Bill in USA
-
Only 5 left in the store. :climber:
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA,??
04 Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond
13 - Monrogue - USA,??
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey - UK,??
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
-
Douglas, Def
You two could sell a deep freezer to an Iqaluit native... :rofl:
PS of course I am referring to a “resident” thereof.
-
4 that is all :climber:
-
Douglas, Def
You two could sell a deep freezer to an Iqaluit native... :rofl:
PS of course I am referring to a “resident” thereof.
Plus the add-on ice maker.
Well done gentlemen!
-
Who's going to. It the 100th one?! (Would've been sweet to be numbered)
-
4 that is awl :climber:
FIFY :D
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond
13 - Monrogue - USA,??
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey - UK,??
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
-
Douglas, Def
You two could sell a deep freezer to an Iqaluit native... :rofl:
PS of course I am referring to a “resident” thereof.
Plus the add-on ice maker.
Well done gentlemen!
Dose this mean we're going to get a NEW badge? MTo Master Salesman?
:rofl: :rofl: :rofl:
-
Who's going to. It the 100th one?! (Would've been sweet to be numbered)
Could be you, all you need to do is buy 97,98,99 and 100. Go for it and It's all yours :pok: :pok: :pok:
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond
13 - Monrogue - USA,??
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey - UK,??
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
-
4 that is awl :climber:
FIFY :D
Thanky............. :climber:
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond
13 - Monrogue - USA,??
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kev Davey - UK,??
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond
13 - Monrogue - USA,??
14 - Fast Bill - United Kingdom, East Anglia
15 - koke
16 - Mechanickal
17 - Kev Davey - UK,??
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, XXXX
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, XXXX
13 - Monrogue - USA,??
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain ??
16 - Mechanickal - Belgium
17 - Kev Davey - UK,??
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
-
I had to recheck, only
4 MTo PX's still available.
Linky: MultiTool of the Year 2016 (https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html)
And I think this is the last day of "pre-order pricing". :pok:
New page 'nana dance:
(http://www.pic4ever.com/images/banana_smiley_5.gif)(http://www.pic4ever.com/images/banana_smiley_5.gif)(http://www.pic4ever.com/images/banana_smiley_5.gif)
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, XXXX
13 - Monrogue - USA,??
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain ??
16 - Mechanickal - Belgium
17 - Kev Davey - UK,??
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
-
(https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcRKTRwrHGBye_bUGyTHV7kuBi8iSakA7oKY1wUTQpa3h-5hw0E3Hg)
-
New page 'nana dance:
(http://www.pic4ever.com/images/banana_smiley_5.gif)(http://www.pic4ever.com/images/banana_smiley_5.gif)(http://www.pic4ever.com/images/banana_smiley_5.gif)
Stop the dancing bananas!
(https://forum.multitool.org/index.php?action=dlattach;topic=66780.0;attach=346121;image)
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA,??
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain ??
16 - Mechanickal - Belgium
17 - Kev Davey - UK,??
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA,??
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain ??
16 - Mechanickal - Belgium
17 - Kev Davey - UK,??
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA,??
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain ??
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe :D
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
-
Oh! Thought you were in one of the doMinions!
-
Ssmurfhorpe? :think: ???
-
Gotta love the swear filter! Kev comes from a place oop norf called Scun thorpe (but one word not two).
-
Gotta love the swear filter! Kev comes from a place oop norf called Scun thorpe (but one word not two).
And yet, Kev always seems quite dignified. Even gentled. Simply amazin'. :pok:
-
He is a total gent. Don't tell him I said that though.
-
Gotta love the swear filter! Kev comes from a place oop norf called Scun thorpe (but one word not two).
Thanks Mags, was having much difficulty finding the right filtered word to fit! :facepalm:
Definitely not a word you throw around lightly in these parts. :ahhh
-
Gotta love the swear filter! Kev comes from a place oop norf called Scun thorpe (but one word not two).
Thanks Mags, was having much difficulty finding the right filtered word to fit! :facepalm:
Definitely not a word you throw around lightly in these parts. :ahhh
Unlike oop norf in Scun thorpe :D
-
He is a total gent. Don't tell him I said that though.
(https://i.imgur.com/TuRORwp.jpg)
-
Crickets............. :angel:
-
Just got an email from the store about my order saying "processing in progress." I thought it would be awhile before the order was even placed with victorinox? :think:
-
I received the same email as well. But, I don't think it means our Vics are coming yet though. Probably just something with ordering or payment...etc.
We can only wish they were done and on the way. :climber:
-
Ok. So if I make it in time, what's the offer? :D free shipping or discount code talk, how much are these priced to be in US please, out the door?
I thiiiiink I'm in :gimme: :mail: :whistle: :tu: :cheers:
-
Ok. So if I make it in time, what's the offer? :D free shipping or discount code talk, how much are these priced to be in US please, out the door?
I thiiiiink I'm in :gimme: :mail: :whistle: :tu: :cheers:
Mine with expadited, tracked and insured shipping was $72.61. Almost $14.00 of that was the shipping. If you get it now there is no code needed just PLACE THE ORDER. :tu: :tu:
-
BETTER HURRY. Discount ends tomorrow and there are only 3 left in the store.
-
BETTER HURRY. Discount ends tomorrow and there are only 3 left in the store.
I do think we already are tomorrow here, :facepalm: ... Greenwich Mean Time :whistle:
-
Just got an email from the store about my order saying "processing in progress." I thought it would be awhile before the order was even placed with victorinox? :think:
Out of all of the options for order updates in the store, that is the closest to being accurate. It is also a way for me to confirm to members that their order has been received, and for me to also keep them straight.
The usual store process (for those interested in such things) is quite simple. When an order comes in I download the invoice and print TWO copies of it. I then fill the order, package it up, print the shipping label, write a short note on the order to thank the buyer personally and place it in my Outbox (really a Maxpedition Sitka) that I empty at the local mailbox when I walk my dogs, which I do several times per day. The second copy of the invoice then goes into the Completed Orders file.
With the pre-orders the process changes slightly, in that when I print the orders out, both copies get paper clipped together and placed in a Pending Orders file until such time as I can fill them- and let me tell you, that is a pretty big file folder right now! :ahhh
I also ordered boxes to ship the knives in, so that they should be well packaged and protected when they go out, although I will have to make a special run to my PO and drop them off rather than just taking them to the local mailbox, since they aren't likely to all fit in the mailbox- even if I use all 5 of the mailboxes in my neighborhood!
Def
-
I also ordered boxes to ship the knives in, so that they should be well packaged and protected when they go out, although I will have to make a special run to my PO and drop them off rather than just taking them to the local mailbox, since they aren't likely to all fit in the mailbox- even if I use all 5 of the mailboxes in my neighborhood!
Def
I'm imagining the look on faces of the post office staff when you hand them 100 small packages to post. :rofl:
-
I'm debating getting another to use as a GAW prize for when I eventually get to 10K posts. If there's still 3 left after work I'll do it
-
Just got an email from the store about my order saying "processing in progress." I thought it would be awhile before the order was even placed with victorinox? :think:
Out of all of the options for order updates in the store, that is the closest to being accurate. It is also a way for me to confirm to members that their order has been received, and for me to also keep them straight.
The usual store process (for those interested in such things) is quite simple. When an order comes in I download the invoice and print TWO copies of it. I then fill the order, package it up, print the shipping label, write a short note on the order to thank the buyer personally and place it in my Outbox (really a Maxpedition Sitka) that I empty at the local mailbox when I walk my dogs, which I do several times per day. The second copy of the invoice then goes into the Completed Orders file.
With the pre-orders the process changes slightly, in that when I print the orders out, both copies get paper clipped together and placed in a Pending Orders file until such time as I can fill them- and let me tell you, that is a pretty big file folder right now! :ahhh
I also ordered boxes to ship the knives in, so that they should be well packaged and protected when they go out, although I will have to make a special run to my PO and drop them off rather than just taking them to the local mailbox, since they aren't likely to all fit in the mailbox- even if I use all 5 of the mailboxes in my neighborhood!
Def
Thanks for the insight. And thanks for all the effort youre putting in to do this for us :cheers:
-
I'm debating getting another to use as a GAW prize for when I eventually get to 10K posts. If there's still 3 left after work I'll do it
So you'll stop posting at 9999 posts so you can keep it for yourself? :pok:
-
I'm debating getting another to use as a GAW prize for when I eventually get to 10K posts. If there's still 3 left after work I'll do it
So you'll stop posting at 9999 posts so you can keep it for yourself? :pok:
I'll already have one for myself so this one is a future gaw prize
-
Most generous, Kevin.
I don't care what everybody is saying, you're OK. :cheers:
Oh, looks like there are only two left.
MultiTool of the Year 2016 (https://store.multitool.org/departments/limited-edition-red-alox-victorinox-pioneer-x-253.html)
-
Somebody have pitty on the LAST 2
THEY NEED A GOOD HOME
-
Grant en route to post office
(https://thumbs.dreamstime.com/z/man-carrying-pile-boxes-high-41058319.jpg)
-
I'm debating getting another to use as a GAW prize for when I eventually get to 10K posts. If there's still 3 left after work I'll do it
.....
I'll already have one for myself so this one is a future gaw prize
I think 5k is a much better target for your GAW :think: :tu: :D
-
Grant en route to post office
(https://thumbs.dreamstime.com/z/man-carrying-pile-boxes-high-41058319.jpg)
I hope mine isn't in one of the 3 on top :dwts:
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA,??
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe :D
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
Proud SAKMC member :)
-
Love the list guys. It looks a little incomplete though. 98 knives will soon be adopted into new homes but we only show where 24 of them will be going. If any one knows some one not already on the list please encourage them to join in. I know some of us will be lovingly taking in twins, but even that leaves several of our little Swiss babies unacounted for.
(https://i.ebayimg.com/thumbs/images/g/xWIAAOSwNnRYkssd/s-l225.jpg)
Oh, there are still 2 in need.
I know, I know the discount is no more, but they still need a home.
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
-
There are off-siters who bought some as well. They will likely never read this thread - or reply to it. :ahhh
-
There are off-siters who bought some as well. They will likely never read this thread - or reply to it. :ahhh
and some of us bought more than one as well
-
Alright then, can I be number 26 on the list? I ordered one, or at least I paid for it ;)
-
I wish I can add my name but I ordered one via a group buy for Filipinos led by the very kind @dmanuel. And we'll just pay him when the MTO PX arrives in our hands. I guess I'll just post when I have it on my hand and then request for a badge for an MTO branded knife :)
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
Damn'
I thought you were German :facepalm:
Got some difficulties with those two flags :twak:
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
Damn'
I thought you were German :facepalm:
Got some difficulties with those two flags :twak:
Ah yes, it's all in the arrangement :D
-
Ah yes, it's all in the arrangement :D
Both flag size, orientation and color order are different, but still I can't get to remember which one is which xD
-
Still 2 left :pok:
-
Crazy. :ahhh
-
Still 2 left :pok:
There can be only one :ahhh
-
This hasn't sold out yet? ::)
:pok: :pok: :pok:
-
My little Vic family is lonely waiting for the Pioneer X. :climber:
-
My little Vic family is lonely waiting for the Pioneer X. :climber:
:like: :tu:
-
My little Vic family is lonely waiting for the Pioneer X. :climber:
Didn't you have not a single Vic a few months back? :shrug:
-
:like:
My little Vic family is lonely waiting for the Pioneer X. :climber:
:like:
-
My little Vic family is lonely waiting for the Pioneer X. :climber:
Didn't you have not a single Vic a few months back? :shrug:
I had a few of them given to me over the years , but had never paid money for one. Douglas generously sent me a Swisstool earlier this year and that is when I gained a healthy appreciation for Vic. After seeing the serious Vics, the light duty SAKs made much more sense to me as an add on carry to pair with big MTs.
I had carried an explorer for half of my life in a pocket, but didn't know how cool different SAKs were until after joining the board and reading everyone's posts about their versatility.
-
Well, the Pioneer X is my favorite.
Not that I wouldn't find some scratch for a Farmer X.......right Victorinox?..... :pok:
-
My little Vic family is lonely waiting for the Pioneer X. :climber:
Didn't you have not a single Vic a few months back? :shrug:
I had a few of them given to me over the years , but had never paid money for one. Douglas generously sent me a Swisstool earlier this year and that is when I gained a healthy appreciation for Vic. After seeing the serious Vics, the light duty SAKs made much more sense to me as an add on carry to pair with big MTs.
I had carried an explorer for half of my life in a pocket, but didn't know how cool different SAKs were until after joining the board and reading everyone's posts about their versatility.
:assimilate:
-
:rofl: :rofl:
-
Scissor badge, I already have the other two.
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
-
Still 2 left :pok:
-
I would have bet they would have been sold out a week ago. 2 left? Hmmm.
Anyone who didn't buy one yet, don't miss out on a piece of MT.o history! Last two chances to own the MT.o Pioneer X Swiss Army Knife! Don't be the two people kicking themselves for not having one and having to pay me a $1000 to get my MT.o Pioneer X from me! :tu:
-
We´re all waiting for a GAW of the last two. Can´t wait for Kevin to reach 10,000 posts. :D
-
Love the list guys. It looks a little incomplete though. 98 knives will soon be adopted into new homes but we only show where 24 of them will be going. If any one knows some one not already on the list please encourage them to join in. I know some of us will be lovingly taking in twins, but even that leaves several of our little Swiss babies unacounted for.
(https://i.ebayimg.com/thumbs/images/g/xWIAAOSwNnRYkssd/s-l225.jpg)
Oh, there are still 2 in need.
I know, I know the discount is no more, but they still need a home.
One of them will be coming here to California for me. :tu:
-
We´re all waiting for a GAW of the last two. Can´t wait for Kevin to reach 10 5,000 posts. :D
FTFY
-
:tu:
-
So, what’s next? Do we have a timeline for these beauties? Just a little excited I guess, but did I miss something?
:climber:
-
I don't know.
Like you, I'm excited to get my hands on one of these. The PX is my favorite SAK, and red is my favorite Alox color variant. So I want it NOW!
I think Def has already placed the order, now it's just a matter of be patient and wait. You know, "good things take time."
(http://www.pic4ever.com/images/146fs495919.gif)
-
Nix,
I know hey! Darn manufacturing process.
:whistle:
-
Right?
We've been talking about this for several days now, should be done. Right?
-
I'm just waiting for the next step myself....
Def
-
:whistle: while you wait, so they say. I know Def did confirm the order with Victorinox a couple of weeks ago. I too am on pins and needles with anticipation. :ahhh
I'm certain Def will provide an update as soon as possible. Just hang tight every one. :popcorn:
OK well he beat me to it by seconds
-
(http://www.pic4ever.com/images/s2040.gif)
-
:popcorn:
-
I'm not in any hurry............is it here yet............well is it.......... :gimme: :gimme: :gimme: :gimme: :gimme:
-
Scissor badge, I already have the other two.
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
I have one on the way to Louisiana. Can’t wait!
Sent from my iPad using Tapatalk
-
:popcorn: :popcorn:
-
:popcorn:
Awarded one of the two. :tu: Everyone on the list gets the other one when they arrive. ;)
-
We´re all waiting for a GAW of the last two. Can´t wait for Kevin to reach 10,000 posts. :D
I'd best get posting then
-
:popcorn:
Awarded one of the two. :tu: Everyone on the list gets the other one when they arrive. ;)
alox with scissors badge is only for custom saks?
-
:popcorn:
Awarded one of the two. :tu: Everyone on the list gets the other one when they arrive. ;)
alox with scissors badge is only for custom saks?
We don't have them in our eager little hands yet so don't technically own one yet. If you have a pioneer x already get your badge request thread up :pok:
-
alox with scissors badge is only for custom saks?
Originally yes but we're good for awarding it for a PX.
-
It was originally for custom knives only as there were no official ALOX knives with scissors.
Well, except for the 58mm models.
And the highly collectible 84mm models like the Voyageur.
And a few others...
But yes, it works with any/all ALOX models.
Def
-
Ok, haven’t been on this thread in awhile. What is the list of names for?
Sent from my iPhone using Tapatalk
-
Ok, haven’t been on this thread in awhile. What is the list of names for?
Sent from my iPhone using Tapatalk
A list of those that have ordered an MTO pioneer x to make it easier to award the badges for alox with scissors, mto store user, and mto branded tool user
-
Ok, haven’t been on this thread in awhile. What is the list of names for?
Sent from my iPhone using Tapatalk
A list of those that have ordered an MTO pioneer x to make it easier to award the badges for alox with scissors, mto store user, and mto branded tool user
Well I’d better add myself to the list. I ordered mine the first few days!
Sent from my iPhone using Tapatalk
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
Sent from my iPhone using Tapatalk
-
It was originally for custom knives only as there were no official ALOX knives with scissors.
Well, except for the 58mm models.
And the highly collectible 84mm models like the Voyageur.
And a few others...
But yes, it works with any/all ALOX models.
Def
Please don't talk about the Voyageur, it is both my best dream and worst nightmare xD I. WANT. ONE. (but not today).
(another Alox with scissors is the 74mm MoneyClip)
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
Sent from my iPhone using Tapatalk
I
I’m in. I ordered early from Louisiana
Sent from my iPad using Tapatalk
-
I think the list is "self-serve". :cheers:
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
FTFY :whistle:
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
Sent from my iPhone using Tapatalk
I
I’m in. I ordered early from Louisiana
Sent from my iPad using Tapatalk
Ok, but you have to add your name & location to the list.
-
It was originally for custom knives only as there were no official ALOX knives with scissors.
Well, except for the 58mm models.
And the highly collectible 84mm models like the Voyageur.
And a few others...
But yes, it works with any/all ALOX models.
Def
Please don't talk about the Voyageur, it is both my best dream and worst nightmare xD I. WANT. ONE. (but not today).
(another Alox with scissors is the 74mm MoneyClip)
You and me both. Unfortunately I have never been able to bring myself to part with the $300+ they usually go for, as I have purchased cars for less than that. :facepalm:
Def
-
:oops:
Back to the naughty step..........sigh......... :facepalm:
-
You don't need the naughty step, Butch. You need another cup of coffee... :rofl:
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
Sent from my iPhone using Tapatalk
I
I’m in. I ordered early from Louisiana
Sent from my iPad using Tapatalk
Ok, but you have to add your name & location to the list.
Thanks for the heads up. I was not sure how to do that.
Sent from my iPad using Tapatalk
-
Can we change the title of this thread? Everytime "MTO RED PIONEER X, IT"S HERE!!!!!!!!!!!!!" pops up in my Updated Topics list, I think, "Nope. It's not, and Def doesn't even have them yet."
Disappointment every time. :(
How about "MTO RED PIONEER X, IT"S ALMOST HERE!!!!!!!!!!!!!"
If not, can someone at least fix the double quotes in the thread title that is supposed to be an apostrophe? I can't believe none of us OCD badge members caught that one yet. :)
-
I'm with Raistlin on this one.
I always think they arrived at Def's place.
Sooner or later MTO will give me a heart attack.
-
I'm with Raistlin on this one.
I always think they arrived at Def's place.
Sooner or later MTO will give me a heart attack.
I know. Too much stress :ahhh
And now that I pointed out that THERE ARE DOUBLE QUOTES WHERE AN APOSTROPHE IS SUPPOSED TO BE IN THE THREAD TITLE, it will drive some members insane until it's changed >:D
-
Oh man, thanks a lot! I just noticed the quotation marks. :facepalm: Regarding above statements... My sentiments exactly.
-
:mn:
-
And zoidberg prevents another few heart attacks! :salute:
-
Thanks Z-Man!!! :salute: :tu: :cheers:
But I was really hoping for AWLmost... :pok: :D
-
And Zoidberg prevents another few heart attacks! :salute:
And yet you lot continue to capitalize my name... :crash:
-
Thanks Z-Man!!! :salute: :tu: :cheers:
But I was really hoping for AWLmost... :pok: :D
:facepalm:
-
Thanks Z-Man!!! :salute: :tu: :cheers:
Yes. Thanks, z! A crisis was averted.
-
Thanks Z-Man!!! :salute: :tu: :cheers:
Yes. Thanks, z! A crisis was averted.
:hatsoff:
-
And zoidberg prevents another few heart attacks! :salute:
And yet you lot continue to capitalize my name... :crash:
Sorry, force of habit. Fixed. :tu:
-
(https://i.pinimg.com/236x/4c/20/f4/4c20f465c2f832f53546101361941d62--hobbit-funny-hobbit-humor.jpg)
-
:rofl: :rofl:
-
:waving:
-
(http://www.pic4ever.com/images/l034.gif)
-
:popcorn:
-
(http://www.pic4ever.com/images/budo.gif)
(http://www.pic4ever.com/images/banana_smiley_23.gif)
(http://www.pic4ever.com/images/banana_smiley_12.gif)
(http://www.pic4ever.com/images/banana_smiley_34.gif)
(http://www.pic4ever.com/images/banana_smiley_20.gif)
-
Ah yes, it's all in the arrangement :D
Both flag size, orientation and color order are different, but still I can't get to remember which one is which xD
The yellow is also different, on the Belgian flag the yellow is lighter, on the German flag the yellow is darker and referred to as "gold".
Fun fact, the current Belgian flag is unconstitutional, in the Belgian constitution the flag is described as "red, yellow and black" which was changed in "black, yellow, red" later on because it looked nicer ... (but this was never changed in the constitution). During the revolution in 1830 the stripes were even horizontaly for a short period, but were then replaced by vertical stripes (story goes they just did this to p*ss *ff the Dutch even more ...). It's not true that they went with the vertical stripes to differentiate from the German flag, since the German flag was not yet in use back then (Belgian flag was made official in 1831, German flag was made official in 1848). At least that's what they taught me in school.
https://www.youtube.com/watch?v=_e8PGPrPlwA
-
Ah yes, it's all in the arrangement :D
Both flag size, orientation and color order are different, but still I can't get to remember which one is which xD
The yellow is also different, on the Belgian flag the yellow is lighter, on the German flag the yellow is darker and referred to as "gold".
Fun fact, the current Belgian flag is unconstitutional, in the Belgian constitution the flag is described as "red, yellow and black" which was changed in "black, yellow, red" later on because it looked nicer ... (but this was never changed in the constitution). During the revolution in 1830 the stripes were even horizontaly for a short period, but were then replaced by vertical stripes (story goes they just did this to p*ss *ff the Dutch even more ...). It's not true that they went with the vertical stripes to differentiate from the German flag, since the German flag was not yet in use back then (Belgian flag was made official in 1831, German flag was made official in 1848). At least that's what they taught me in school.
:rofl:
-
Finaly someone knowledgeable walked in 8)
-
Finaly someone knowledgeable walked in 8)
I wouldn't go that far ...
Show content
(https://memegenerator.net/img/instances/500x/21670577/even-i-wouldnt-go-that-far.jpg)
-
Finaly someone knowledgeable walked in 8)
I wouldn't go that far ...
Show content
(https://memegenerator.net/img/instances/500x/21670577/even-i-wouldnt-go-that-far.jpg)
Fixed that for you. You forgot the img tags....
Not so knowledgeable after all :whistle:
Have you seen your last pm?
-
Finaly someone knowledgeable walked in 8)
I wouldn't go that far ...
Show content
(https://memegenerator.net/img/instances/500x/21670577/even-i-wouldnt-go-that-far.jpg)
Fixed that for you. You forgot the img tags....
Not so knowledgeable after all :whistle:
Have you seen your last pm?
I already fixed the IMG tags right after I posted it, before you posted this post ...
https://www.youtube.com/watch?v=HiFNt8nGffA
And yes, I saw your last pm, but I thought you said there was no need to be fast ... right ? ;)
-
Ah yes, it's all in the arrangement :D
Both flag size, orientation and color order are different, but still I can't get to remember which one is which xD
The yellow is also different, on the Belgian flag the yellow is lighter, on the German flag the yellow is darker and referred to as "gold".
Fun fact, the current Belgian flag is unconstitutional, in the Belgian constitution the flag is described as "red, yellow and black" which was changed in "black, yellow, red" later on because it looked nicer ... (but this was never changed in the constitution). During the revolution in 1830 the stripes were even horizontaly for a short period, but were then replaced by vertical stripes (story goes they just did this to p*ss *ff the Dutch even more ...). It's not true that they went with the vertical stripes to differentiate from the German flag, since the German flag was not yet in use back then (Belgian flag was made official in 1831, German flag was made official in 1848). At least that's what they taught me in school.
How interesting! :cheers:
-
Finaly someone knowledgeable walked in 8)
I wouldn't go that far ...
Show content
(https://memegenerator.net/img/instances/500x/21670577/even-i-wouldnt-go-that-far.jpg)
Fixed that for you. You forgot the img tags....
Not so knowledgeable after all :whistle:
Have you seen your last pm?
I already fixed the IMG tags right after I posted it, before you posted this post ...
https://www.youtube.com/watch?v=HiFNt8nGffA
And yes, I saw your last pm, but I thought you said there was no need to be fast ... right ? ;)
Noooo but you can indicate interest..
Or an "oh nick you're my absolute hero! Where would the world be without you? :ahhh"
Or just some random blabber... I'm a talker you know :fugly:
-
I can't believe there are still 2 in stock
-
"Oh nick you're my absolute hero! Where would the world be without you ?"
Show content
(https://www.minecraft-smp.de/media/kunena/attachments/5261/LOL.jpg)
-
I can't believe there are still 2 in stock
Waiting for you :pok:
-
"Oh nick you're my absolute hero! Where would the world be without you ?"
Show content
(https://www.minecraft-smp.de/media/kunena/attachments/5261/LOL.jpg)
I don't need the Enterprise to detect that... ::)
:twak:
:D
-
I can't believe there are still 2 in stock
Waiting for you :pok:
I've got 3 coming as it is. One to carry, one to stay all nice and new and one for a future GAW. I'll let someone else get those two
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
You know, after reading the above I was thinking about buying one just to annoy you ... >:D
But then I noticed the discount has ended, so I'm out ... ::)
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
You know, after reading the above I was thinking about buying one just to annoy you ... >:D
But then I noticed the discount has ended, so I'm out ... ::)
Muhahahahaaaaa >:D
You should log in more often :pok:
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
You know, after reading the above I was thinking about buying one just to annoy you ... >:D
But then I noticed the discount has ended, so I'm out ... ::)
Muhahahahaaaaa >:D
You should log in more often :pok:
I have 3 kids, the way I see it I "logged in" a bit too often ... :whistle:
Are you sure you have a real girlfriend ... ? :think:
I mean, you do seem to spend an awful lot of time hanging around here, don't you ... ? :pok:
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
You know, after reading the above I was thinking about buying one just to annoy you ... >:D
But then I noticed the discount has ended, so I'm out ... ::)
Muhahahahaaaaa >:D
You should log in more often :pok:
I have 3 kids, the way I see it I "logged in" a bit too often ... :whistle:
Are you sure you have a real girlfriend ... ? :think:
I mean, you do seem to spend an awful lot of time hanging around here, don't you ... ? :pok:
:rofl:
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
You know, after reading the above I was thinking about buying one just to annoy you ... >:D
But then I noticed the discount has ended, so I'm out ... ::)
Muhahahahaaaaa >:D
You should log in more often :pok:
I have 3 kids, the way I see it I "logged in" a bit too often ... :whistle:
Are you sure you have a real girlfriend ... ? :think:
I mean, you do seem to spend an awful lot of time hanging around here, don't you ... ? :pok:
:rofl:
She was out of the house today and our working hours usualy don't match.
Which means we'll be able to stay together forever 8)
And don't act like this is all my fault while my gf just gives me breathing room :pok:
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
You know, after reading the above I was thinking about buying one just to annoy you ... >:D
But then I noticed the discount has ended, so I'm out ... ::)
Muhahahahaaaaa >:D
You should log in more often :pok:
I have 3 kids, the way I see it I "logged in" a bit too often ... :whistle:
Are you sure you have a real girlfriend ... ? :think:
I mean, you do seem to spend an awful lot of time hanging around here, don't you ... ? :pok:
:rofl:
She was out of the house today and our working hours usualy don't match.
Which means we'll be able to stay together forever 8)
And don't act like this is all my fault while my gf just gives me breathing room :pok:
:drink: :drink: :oops: :oops: :rofl: :rofl: :rofl: :whistle:
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
You know, after reading the above I was thinking about buying one just to annoy you ... >:D
But then I noticed the discount has ended, so I'm out ... ::)
Muhahahahaaaaa >:D
You should log in more often :pok:
I have 3 kids, the way I see it I "logged in" a bit too often ... :whistle:
Are you sure you have a real girlfriend ... ? :think:
I mean, you do seem to spend an awful lot of time hanging around here, don't you ... ? :pok:
:rofl:
She was out of the house today and our working hours usualy don't match.
Which means we'll be able to stay together forever 8)
And don't act like this is all my fault while my gf just gives me breathing room :pok:
I have a hunch you're not going to be the only Belgian who owns one (or more :whistle:) of these red beauties ... >:D
Show content
(http://www.quickmeme.com/img/bc/bc39fd77b95c22fff332e8bf38ff78b52c88da48826447d3e7d37579740f2cf7.jpg)
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
Top-Gear-24...HUUUUMMMM....Not on the list? HUUUMMMM???
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
You know, after reading the above I was thinking about buying one just to annoy you ... >:D
But then I noticed the discount has ended, so I'm out ... ::)
Muhahahahaaaaa >:D
You should log in more often :pok:
I have 3 kids, the way I see it I "logged in" a bit too often ... :whistle:
Are you sure you have a real girlfriend ... ? :think:
I mean, you do seem to spend an awful lot of time hanging around here, don't you ... ? :pok:
:rofl:
She was out of the house today and our working hours usualy don't match.
Which means we'll be able to stay together forever 8)
And don't act like this is all my fault while my gf just gives me breathing room :pok:
I have a hunch you're not going to be the only Belgian who owns one (or more :whistle:) of these red beauties ... >:D
Show content
(http://www.quickmeme.com/img/bc/bc39fd77b95c22fff332e8bf38ff78b52c88da48826447d3e7d37579740f2cf7.jpg)
(https://us.toluna.com/dpolls_images/2016/05/01/3b9a36d9-0426-41d7-b5f8-f0ae288964c7_x300.jpg)
-
(http://www.azquotes.com/picture-quotes/quote-patience-s-bitter-but-it-s-fruit-is-sweet-aristotle-133-86-98.jpg)
-
Bitters are bitter and Grenadine is sweet.
-
It's fun to see I'll probably be the only Belgian guy with one...
Then again, my Golfer is probably quite unique too...
:dd:
You know, after reading the above I was thinking about buying one just to annoy you ... >:D
But then I noticed the discount has ended, so I'm out ... ::)
Muhahahahaaaaa >:D
You should log in more often :pok:
I have 3 kids, the way I see it I "logged in" a bit too often ... :whistle:
Are you sure you have a real girlfriend ... ? :think:
I mean, you do seem to spend an awful lot of time hanging around here, don't you ... ? :pok:
:rofl:
She was out of the house today and our working hours usualy don't match.
Which means we'll be able to stay together forever 8)
And don't act like this is all my fault while my gf just gives me breathing room :pok:
I have a hunch you're not going to be the only Belgian who owns one (or more :whistle:) of these red beauties ... >:D
Show content
(http://www.quickmeme.com/img/bc/bc39fd77b95c22fff332e8bf38ff78b52c88da48826447d3e7d37579740f2cf7.jpg)
(https://us.toluna.com/dpolls_images/2016/05/01/3b9a36d9-0426-41d7-b5f8-f0ae288964c7_x300.jpg)
(http://www.insightforums.com/wp-content/uploads/2013/06/dog-distracted-by-squirrel-.jpg)
-
Saw this posted on FB. I wonder if our red will be like this. Just want to share here
(https://uploads.tapatalk-cdn.com/20171212/f618fa63c8a50a32c4003076808146b6.jpg)(https://uploads.tapatalk-cdn.com/20171212/c659e84e74ebda17bb621f4f0792665f.jpg)
-
If it is, I'm looking forward to the real thing :drool:
-
If it is, I'm looking forward to the real thing :drool:
+1 That's a nice shade of red.
-
If it is, I'm looking forward to the real thing :drool:
+1 That's a nice shade of red.
Are you sure that the camera that took that picture has the correct colour settings? :angel:
What about your monitors? :whistle:
-
excellent points, Pab.
(http://www.pic4ever.com/images/character0114.gif)
-
If it is, I'm looking forward to the real thing :drool:
+1 That's a nice shade of red.
Are you sure that the camera that took that picture has the correct colour settings? :angel:
What about your monitors? :whistle:
I have showed you Forum Members, in a separate post, what our new MTO branded Pioneer X looks like...but there it is again:
-
I am just thinking that Victorinox might have Pabloed the branding a little. :think:
-
:rofl:
-
They totally Pabloed it :rofl:
So I heard they have landed in Canadia.... amiright? :D
-
They totally Pabloed it :rofl:
So I heard they have landed in Canadia.... amiright? :D
Where's Canadia? :think:
-
It's a little piece of soil just at the northern tip of Texas, I believe :D
Anyhow, I don't think it's in Merica
-
It's a little piece of soil just at the northern tip of Texas, I believe :D
Anyhow, I don't think it's in Merica
R U sure? Isn't it a county in Northern California?
I say this because I heard it got cold there. (http://www.pic4ever.com/images/3772.gif)
-
It's a little piece of soil just at the northern tip of Texas, I believe :D
Anyhow, I don't think it's in Merica
If your talking Texas, that would be Canadian it's right next door to White Deer.
:rofl:
-
It's a little piece of soil just at the northern tip of Texas, I believe :D
Anyhow, I don't think it's in Merica
R U sure? Isn't it a county in Northern California?
I say this because I heard it got cold there. (http://www.pic4ever.com/images/3772.gif)
Could be Mercia. But that's probably a bit Far East even though it's got cold here :think:
-
You peeps kill me
:rofl:
-
I hope my MTO branded Pioneer X shows up here in CANADA and not end up somewhere like TX or CA...
-
I hope my MTO branded Pioneer X shows up here in CANADA and not end up somewhere like TX or CA...
Considering how small Canada is, you must be what, a stones throw? from Grants house/shop.
-
I hope my MTO branded Pioneer X shows up here in CANADA and not end up somewhere like TX or CA...
Considering how small Canada is, you must be what, a stones throw? from Grants house/shop.
Doesn't everyone know everyone else in Canada ? You'd've thought etc etc
-
Well I just had to pay a customs charge, so I'm guessing it's for this, don't think I've ordered anything else from over there :whistle:
-
Oooooh....this should get the rumor mill going......
-
I hope my MTO branded Pioneer X shows up here in CANADA and not end up somewhere like TX or CA...
Considering how small Canada is, you must be what, a stones throw? from Grants house/shop.
Heck I can see him now
:B:
-
Grant told me the day before yesterday that he didn't receive them yet.
Then again, Grant likes playing mind games >:D
-
Grant told me the day before yesterday that he didn't receive them yet.
Then again, Grant likes playing mind games >:D
Not exactly right. I heard that he has received the requested units from Victorinox, but the special clone version he ordered for Butch from China hasn't arrived yet. I think he's waiting for that to come in before he ships them all out.
-
Grant told me the day before yesterday that he didn't receive them yet.
Then again, Grant likes playing mind games >:D
Not exactly right. I heard that he has received the requested units from Victorinox, but the special clone version he ordered for Butch from China hasn't arrived yet. I think he's waiting for that to come in before he ships them all out.
YES I' ll have the only MTo clone in the world
:rofl: :rofl: :gimme: :gimme: :gimme: :twak:
-
:whistle:
-
:whistle:
:pok: ETA? :pok:
-
Gotta be any day now. Or the day after that. Right?
-
Gotta be any day now. Or the day after that. Right?
That line if thinking will drive you mad.
Ask Pablo...
He's mentaly Pabloed by now...
-
Gotta be any day now. Or the day after that. Right?
That line if thinking will drive you mad.
Ask Pablo...
He's mentaly Pabloed by now...
Yup... :fugly:
Oh wait, I think I hear the postman!
-
Nope, just a bird. :fugly: :fugly:
-
:rofl:
-
Okay, time to make it official ... :SAKnight:
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
29 - Top-Gear-24 - Belgium
:cheers:
-
(http://m.quickmeme.com/img/a9/a9bb01a987e71bd4d616069f36ffcb077c9be786189ba799a685efeb0499e23f.jpg)
-
So now there will be only two MT.O red PX in Belgium. :whistle:
-
So now there will be only two MT.O red PX in Belgium. :whistle:
I wouldn't bet on it ... :whistle:
-
So now there will be only two MT.O red PX in Belgium. :whistle:
I wouldn't bet on it ... :whistle:
Oh? Are you going to keep Nicks PX for yourself or send it to me? :pok:
-
So now there will be only two MT.O red PX in Belgium. :whistle:
I wouldn't bet on it ... :whistle:
Oh? Are you going to keep Nicks PX for yourself or send it to me? :pok:
I meant, who says one of us didn't buy more than one ...
You know how "collectors" are, one for the collection, and one that I'll use for EDC (which never sees any actual use either, since there's always a "regular" Pioneer X around also ... :facepalm:).
-
So now there will be only two MT.O red PX in Belgium. :whistle:
I wouldn't bet on it ... :whistle:
Oh? Are you going to keep Nicks PX for yourself or send it to me? :pok:
I meant, who says one of us didn't buy more than one ...
You know how "collectors" are, one for the collection, and one that I'll use for EDC (which never sees any actual use either, since there's always a "regular" Pioneer X around also ... :facepalm:).
Right. The important rule of SAK collecting. Two is one, one is none. :tu:
-
You bought the remaining 2?
-
Nope, it's still showing as 2 remaining
-
No news just yet, but I am hoping soon.
Def
-
The people who have pre-ordered the MTO PX:
(https://i.imgflip.com/21ajhw.jpg) (https://imgflip.com/i/21ajhw)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
:rofl:
-
I'm a master in waiting.
I've got more patience then a Tibetian Monk by now.
Followed closely by Smurf O'Brien
-
I'm a master in waiting.
I've got more patience then a Tibetian Monk by now.
Followed closely by Smurf O'Brien
And only because Smurf O'Brien is not waiting for TWO packages. ::)
-
(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)
The people who have pre-ordered the MTO PX:
(https://i.imgflip.com/21ajhw.jpg) (https://imgflip.com/i/21ajhw)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
:rofl:
:rofl:
-
(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)
The people who have pre-ordered the MTO PX:
(https://i.imgflip.com/21ajhw.jpg) (https://imgflip.com/i/21ajhw)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
:rofl:
:rofl:
:twak: :twak: :facepalm:
-
BIG NEWS!
The Pioneers have arrived in the Victorinox office in Connecticut! :tu:
Unfortunately, I am not a registered dealer in the US, so they need to be transferred to Toronto so I can purchase them through that office. So, they need to cross into Canada, then come to me, then I can finally start packaging and sending them back out to everyone who bought one!
If all goes well, they will start shipping next week! :ahhh
Def
-
:climber:
-
:like:
:popcorn::popcorn::popcorn::popcorn:
:mail::mail::mail::mail:
-
BIG NEWS!
The Pioneers have arrived in the Victorinox office in Connecticut! :tu:
Unfortunately, I am not a registered dealer in the US, so they need to be transferred to Toronto so I can purchase them through that office. So, they need to cross into Canada, then come to me, then I can finally start packaging and sending them back out to everyone who bought one!
If all goes well, they will start shipping next week! :ahhh
Def
:ahhh :ahhh :ahhh :mail: :mail: :mail: :gimme: :gimme: :gimme: :woohoo: :woohoo: :woohoo: :like: :like: :like:
:climber:
-
Very cool. :tu:
-
Oh boy!
-
I have been sitting on an awful lot of money from an awful lot of people for an awful long time- I am really looking forward to getting everything in the mail ASAP!
Def
-
Fantastic news Grant - Thanks - Looking forward to receiving a package in the next few weeks
Like most of us I am super excited about this - and I really think that red will be beautiful
And thanks again to you and Douglas for organising this and to everyone for making it happen and for all the chat and funny observations/comments :tu:
Particllarly liked Top Gear's reasons for buying two/EDC above !!
Although Eeyore was right!! :o :D
Have you thought about changing your profile name to Eeyore? :pok: :D
-
I have been sitting on an awful lot of money from an awful lot of people for an awful long time- I am really looking forward to getting everything in the mail ASAP!
Def
Did I not just see you at the casino? At the “Big” table? Heavy rollers?
-
I'm a master in waiting.
I've got more patience then a Tibetian Monk by now.
Followed closely by Smurf O'Brien
If this thread weren't updated to show up in the top of the list of my Updated Topics page pretty much every time I visit the site, I would be able to put it out of my mind. :facepalm:
-
I'm a master in waiting.
I've got more patience then a Tibetian Monk by now.
Followed closely by Smurf O'Brien
If this thread weren't updated to show up in the top of the list of my Updated Topics page pretty much every time I visit the site, I would be able to put it out of my mind. :facepalm:
What are you saying here?
-
We need to come up with a way to keep this thread going even after we get our BEAUTIFUL NEW
TOYS uhm I mean PX's. I might just be lost without it. I've been on this thing several times a day now sense what July/August. I won't know what to do without it.
Seriously though, it has been an honor to be so involved and see all the great humor and positive attitudes including our beloved Eeyore. :whistle:
-
I have been sitting on an awful lot of money from an awful lot of people for an awful long time- I am really looking forward to getting everything in the mail ASAP!
Def
How does it feel having +$6,000? :D
-
Nice, can't wait to see it in person :drool:
Proud SAKMC member :)
-
I'M SO EXCITED,
and I JUST CAN'T HIDE IT!
(https://ci.memecdn.com/3540093.gif)
-
I have been sitting on an awful lot of money from an awful lot of people for an awful long time- I am really looking forward to getting everything in the mail ASAP!
Def
Did I not just see you at the casino? At the “Big” table? Heavy rollers?
I have a lot of vices but gambling isn't one. At least not normal gambling....
Def
-
I have been sitting on an awful lot of money from an awful lot of people for an awful long time- I am really looking forward to getting everything in the mail ASAP!
Def
How does it feel having +$6,000? :D
I'm sure it would be nice if I had it. In reality it has gone to the credit cards to pay for this order..... :ahhh
And yes, I mean cards. I have to spread the order over two of my cards because neither one has a high enough limit to cover the order alone, and the one that does is one they don't take. :facepalm:
Def
-
I have been sitting on an awful lot of money from an awful lot of people for an awful long time- I am really looking forward to getting everything in the mail ASAP!
Def
How does it feel having +$6,000? :D
I'm sure it would be nice if I had it. In reality it has gone to the credit cards to pay for this order..... :ahhh
And yes, I mean cards. I have to spread the order over two of my cards because neither one has a high enough limit to cover the order alone, and the one that does is one they don't take. :facepalm:
Def
Man, we REALLY appreciate all the hard work. :salute:
-
I have been sitting on an awful lot of money from an awful lot of people for an awful long time- I am really looking forward to getting everything in the mail ASAP!
Def
How does it feel having +$6,000? :D
I'm sure it would be nice if I had it. In reality it has gone to the credit cards to pay for this order..... :ahhh
And yes, I mean cards. I have to spread the order over two of my cards because neither one has a high enough limit to cover the order alone, and the one that does is one they don't take. :facepalm:
Def
Man, we REALLY appreciate all the hard work. :salute:
+1 :tu:
-
BIG NEWS!
The Pioneers have arrived in the Victorinox office in Connecticut! :tu:
Unfortunately, I am not a registered dealer in the US, so they need to be transferred to Toronto so I can purchase them through that office. So, they need to cross into Canada, then come to me, then I can finally start packaging and sending them back out to everyone who bought one!
If all goes well, they will start shipping next week! :ahhh
Def
That are good news !
Could you share the travel of each sak from Switzerland to their new land on a map (or share raw data to do it)
No need to know precisely where, but maybe like per country/region ?
With Weighed arrows (per number) coming from Switzerland to destination countries via Connecticut, Toronto and your place?
Or a Weighed dots map of the destination countries ?
Just to show how MTO is spread worldwide :-)
No I am really getting excited
Edit: forgot a bunch of :woohoo: :woohoo: :woohoo: :woohoo:
-
Looks like the MTo's are going everywhere.....
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
-
Thanks to Douglas, you can add me to the list :D
Syem - Switzerland, Geneva
(I guess the number should be 99 since I think there were 2 left in stock when this happened)
-
Where's my brain?
didn't remember this list :twak:
-
BIG NEWS!
The Pioneers have arrived in the Victorinox office in Connecticut! :tu:
Unfortunately, I am not a registered dealer in the US, so they need to be transferred to Toronto so I can purchase them through that office. So, they need to cross into Canada, then come to me, then I can finally start packaging and sending them back out to everyone who bought one!
If all goes well, they will start shipping next week! :ahhh
Def
:ahhh
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
99 - Syem - Switzerland, Geneva
-
Isn't there someone missing on that list in the last posts ...
There was someone on spot 29 if my memory serves me well ... :wait:
:twak:
;)
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
99 - Syem - Switzerland, Geneva
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
29 - Top-Gear-24 - Belgium
99 - Syem - Switzerland, Geneva
Fixed :salute: :salute:
-
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
99 - Syem - Switzerland, Geneva
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
29 - Top-Gear-24 - Belgium
99 - Syem - Switzerland, Geneva
Fixed :salute: :salute:
Thanks mate :salute:.
I was just kidding, I would have fixed it myself but I'm on my "smartphone" and I hate quoting and/or copy/pasting on my smartphone (old people and modern technology ...).
Edit: I'm only 40 but while using a smartphone I'm getting frustrated like an 80 year old ...
-
Plus those darned kids keep going on your lawn....
Def
-
Just like how you used to go on the old folks lawns when you were a kid. :whistle:
-
Just like how you used to go on the old folks lawns when you were a kid. :whistle:
Has Old Man Johnson been talking about me again??? (http://www.pic4ever.com/images/276.gif)
-
Just like how you used to go on the old folks lawns when you were a kid. :whistle:
Has Old Man Johnson been talking about me again??? (http://www.pic4ever.com/images/276.gif)
He was!
But don't worry Nix, I egged his car for you. :tu:
-
Just like how you used to go on the old folks lawns when you were a kid. :whistle:
Has Old Man Johnson been talking about me again??? (http://www.pic4ever.com/images/276.gif)
He was!
But don't worry Nix, I egged his car for you. :tu:
And I stuck his mailbox flag down. >:D
-
I could learn to love you guys. >:D
-
Who let this drop off the front page?
:pok: :pok: :pok: :D :D :D :whistle: :whistle: :whistle:
-
Who cares? :whistle:
-
Do I? :D
-
Who knows......?
-
:ahhh
Some chinese dude no doubt. :whistle:
-
Sounds like Butch :whistle:
-
Get your 2018 calendar before they're gone :D :tu:
https://forum.multitool.org/index.php/topic,75139.msg1604534.html#msg1604534
-
Get your 2018 calendar before they're gone :D :tu:
https://forum.multitool.org/index.php/topic,75139.msg1604534.html#msg1604534
:pok: :pok:
:tu:
-
:ahhh
Some chinese dude no doubt. :whistle:
:twak: :ahh :twak:
-
Getting pumped, cant wait for these! :mail:
-
Can't wait for the knife and the calendar :dd: :like:
-
:ahhh :ahhh :ahhh I received the shipping notice today! Are there already real world pics? :gimme:
-
Me too... for pics check this thread (https://forum.multitool.org/index.php?topic=75212.0) :woohoo:
Sent on my SM-G930F with Tapatalk
-
I got the shipping email too. Can't wait to see it in person!
Proud SAKMC member :)
-
Don't forget there will be badges. :tu:
zoidaclaus has the list and he'll be checking it twice :ahhh,
so make sure your name is on it if there's one headed your way. :pok: :pok:
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
29 - Top-Gear-24 - Belgium
99 - Syem - Switzerland, Geneva
-
I got my shipping notice as well :D :climber:
-
Me too :D now it's :popcorn: if anyone needs me I'll be waiting by the letterbox
-
Canadians and Americans first!
-
Canadians and Americans first!
Oh my, the postman is at the door...
-
I haven't even received a notification yet. :think:
Checked the MT.o store and it says " processing in progress". :-[
I'll be the last one to get mine. Always last in line. :rofl:
-
Which is much, much better than being patron #103........ :oops:
-
I was just looking at the MTo store. It looks like there are two (2) of these beauties still left in inventory.
Does that mean we sold one hundred (100) 2016 MTo PX's? Or have the spare two (2) knives been held in reserve? (http://www.pic4ever.com/images/ugly_confused2.gif)
-
Don't forget there will be badges. :tu:
zoidaclaus has the list and he'll be checking it twice :ahhh,
so make sure your name is on it if there's one headed your way. :pok: :pok:
zoidaclaus is away for the foreseeable future by the looks of his thread.
-
I got the notifications for all mine yesterday to :tu:
-
zoidaclaus is away for the foreseeable future by the looks of his thread.
zoidnapped by the Grinch?
(http://www.filmofilia.com/wp-content/uploads/2013/02/How-the-Grinch-Stole-Christmas-Dr.-Seuss.jpg)
-
(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif) (http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)(http://www.pic4ever.com/images/banana_smiley_29.gif)
-
omg
-
On the other hand, so few options....
-
Shipping notice received...
-
Nooooooo.........
-
I also received a notice:
Dear Mr. Who,
We are shipping to you a red Pioneer X, MTO 2016 LE, that was intended for Mr. Mechanickal originally. At least he paid for it.
We are aware of his shipping label fraud, and prefer shipping through you as a middleman to avoid any blemish to our name.
Please be so kind as to ship this forward to Mr. Mechanickal.
Of course I´ll do no such thing.
-
:rofl:
I also received a notice:
Dear Mr. Who,
We are shipping to you a red Pioneer X, MTO 2016 LE, that was intended for Mr. Mechanickal originally. At least he paid for it.
We are aware of his shipping label fraud, and prefer shipping through you as a middleman to avoid any blemish to our name.
Please be so kind as to ship this forward to Mr. Mechanickal.
Of course I´ll do no such thing.
:rofl:
-
:rofl: :rofl:
-
Who?
-
Who?
Why, Ron Who of course...
-
Who?
Why, Ron Who of course...
Ron who?
-
:poh:
-
Who?
Why, Ron Who of course...
Ron who?
Knock knock
-
Who's there...
?
-
Ron
-
Ron who?
-
Yes!
-
What?
-
What?
No, Who!
-
And where the smurf should I place my PX once it arrives? :shrug:
(https://uploads.tapatalk-cdn.com/20171230/f93cb36ac6f4cf2e8eb0c2c160c28e8e.jpg)
-
Wow, what a crappy pic.
This any better?
(https://uploads.tapatalk-cdn.com/20171230/ffa51cdd3bbf580125a7a17f1525f0f9.jpg)
-
Nope :facepalm:
-
Third time's the charm. :pok:
-
What?
No, Who!
I dont know
-
And where the smurf should I place my PX once it arrives? :shrug:
(https://uploads.tapatalk-cdn.com/20171230/f93cb36ac6f4cf2e8eb0c2c160c28e8e.jpg)
Easy... in your pocket :)
-
And where the smurf should I place my PX once it arrives? :shrug:
(https://uploads.tapatalk-cdn.com/20171230/f93cb36ac6f4cf2e8eb0c2c160c28e8e.jpg)
Easy... in your pocket :)
+1
-
And where the smurf should I place my PX once it arrives? :shrug:
(https://uploads.tapatalk-cdn.com/20171230/f93cb36ac6f4cf2e8eb0c2c160c28e8e.jpg)
Easy... in your pocket :)
+1
:ahhh :dwts:
-
And where the smurf should I place my PX once it arrives? :shrug:
(https://uploads.tapatalk-cdn.com/20171230/f93cb36ac6f4cf2e8eb0c2c160c28e8e.jpg)
there's an obvious place next to the Yellow-Black EVO :pok:
-
And where the smurf should I place my PX once it arrives? :shrug:
(https://uploads.tapatalk-cdn.com/20171230/f93cb36ac6f4cf2e8eb0c2c160c28e8e.jpg)
there's an obvious place next to the Yellow-Black EVO :pok:
That's where he puts the SAK he keeps in his pocket. :dwts:
-
And where the smurf should I place my PX once it arrives? :shrug:
(https://uploads.tapatalk-cdn.com/20171230/f93cb36ac6f4cf2e8eb0c2c160c28e8e.jpg)
there's an obvious place next to the Yellow-Black EVO :pok:
That's where he puts the SAK he keeps in his pocket. :dwts:
No, TP is right. I cleared that space for the PX. But usualy I tend to place my SAKs with box inside WITH their box. Which you can see at the bottom. (Gold Climber, NIB Astronaut, NIB Golfer)
Speaking of first world problems :facepalm:
-
Wow, what a crappy pic.
This any better?
(https://uploads.tapatalk-cdn.com/20171230/ffa51cdd3bbf580125a7a17f1525f0f9.jpg)
Top shelf Mechy! That’s where the Pioneer X belongs. My two cents.
-
Wow, what a crappy pic.
This any better?
(https://uploads.tapatalk-cdn.com/20171230/ffa51cdd3bbf580125a7a17f1525f0f9.jpg)
Top shelf Mechy! That’s where the Pioneer X belongs. My two cents.
Well, If I put the box there too, It'll block out the light for everything else.. :/
-
I wonder who's will arrive first
-
im gonna have to decompress the package since its so cold out, I'm afraid the presentation box will get ruined by condensation if I open it in warm house, so I will let it warm up in the basement I guess, am I insane? :rofl:
-
im gonna have to decompress the package since its so cold out, I'm afraid the presentation box will get ruined by condensation if I open it in warm house, so I will let it warm up in the basement I guess, am I insane? :rofl:
No! You are thoughtfull!
And the basement is a great idea. That way it stays out of sight long enough.
You won't be able to fight off the curiousity otherwise :D
-
They're here :D
-
(https://i.imgur.com/cg8RceL.jpg)
-
:ahhh :ahhh :ahhh
(https://uploads.tapatalk-cdn.com/20180102/d4eb820c82a0550a88e030f9adf34f87.jpg)
It’s super windy today. The pioneer X kept falling over when I was trying to take the pic :facepalm:
-
(https://i.imgur.com/cg8RceL.jpg)
:like:
-
:ahhh :ahhh :ahhh
(https://uploads.tapatalk-cdn.com/20180102/d4eb820c82a0550a88e030f9adf34f87.jpg)
It’s super windy today. The pioneer X kept falling over when I was trying to take the pic :facepalm:
:like:
-
:mail:
(https://farm5.staticflickr.com/4681/27681585039_af6907dc31_z.jpg)
-
I received mine today :mail:
-
Received my too. I suspect mine will go into the Powernoodle Museum and Secret Arsenal rather than get carried. But you never know.
-
:drool: :drool: :drool: :like: :like: :like: :ahhh :ahhh :ahhh :tu: :tu: :tu:
-
I didn't bother checking my mailbox when I pulled into the driveway after work today. Then I checked this thread a few minutes ago and saw that several members had received theirs, so I had to go check. It came, and it's a beauty, and so is the box :drool: Thanks to all who made this happen :salute:(https://uploads.tapatalk-cdn.com/20180103/ad9d3b6e523d8e17d8028480f9876870.jpg)(https://uploads.tapatalk-cdn.com/20180103/7db550dd5f62e6c6fd673fb5f05529f0.jpg)(https://uploads.tapatalk-cdn.com/20180103/a5161d3de610032c23ced13ae5f07b02.jpg)
Proud SAKMC member :)
-
:tu:
-
Received my too. I suspect mine will go into the Powernoodle Museum and Secret Arsenal rather than get carried. But you never know.
Dying to see that Museum, like your "all folders in a mount" pic or your "MTs in shiny mirror background" group pics :pok:
Nice to see you around PN!! :salute:
hope you have a great 2018 :tu:
-
Nice to see they are arriving, I'm guessing at least another week till mine hits the uk, then another week till I get the card saying I have to pay the silly international package handling fee + vat
-
Nice to see they are arriving, I'm guessing at least another week till mine hits the uk, then another week till I get the card saying I have to pay the silly international package handling fee + vat
Yay .... ugh :bnghd:
-
Nice to see they are arriving, I'm guessing at least another week till mine hits the uk, then another week till I get the card saying I have to pay the silly international package handling fee + vat
Hey, somebody has to pay for Prince Harry's weddin'............. :whistle:
-
:rofl:
-
OK, so here I am, snugged up against the Canadian border, and no PX. I mean the closest big city to me is Calgary, Canada, and.....no sign of the MTo PX. I see Canadians every day. I bet I see Canadian postal officers once in a while. But, still, no PX. :ahhh :ahhh :ahhh
-
Just curious as to when the badges will be awarded?
Don't forget there will be badges. :tu:
zoidaclaus has the list and he'll be checking it twice :ahhh,
so make sure your name is on it if there's one headed your way. :pok: :pok:
01 - Blackbeard - USA, New Jersey
02 - Butch - USA, Texas
03 - El Corkscrew - USA, Arizona
04 - Nix - USA, Montana
05 - Douglas - USA, Texas
06 - italophil - USA, Pennsylvania
07 - T14 - Denmark (inside Legoland)
08 - m47mu74nt - France
09 - gustophersmob - USA, Ohio
10 - Huntsman - Australia, Sydney
11 - gerleatherberman - USA, Alabama
12 - redmond - USA, Washington
13 - Monrogue - USA, Maine
14 - Fast Bill - United Kingdom, East Anglia
15 - koke - Spain, Basque Country
16 - Mechanickal - Belgium
17 - Kev Davey - UK, Ssmurfhorpe
18 - Dutch_Tooler - Germany
19 - raistlin65 - USA, Michigan
20 - coSAK - Germany
21 - Grass - Australia, Brisbane
22 - Marc_in_NS - Canada, Nova Scotia
23 - glenfiddich1983 - the Netherlands
24 - ColoSwiss - USA, Colorado
25 - smiller43147 - USA, Ohio
26 - MusicMen - USA, NJ
27 - zrxoa1 - USA, Kentucky
28 - scott4526 - USA, Louisiana
29 - Top-Gear-24 - Belgium
99 - Syem - Switzerland, Geneva
-
Just curious as to when the badges will be awarded?
+1 Where's my badge!!!! :D :pok: :D
SO GLAD TO HAVE THIS!!!
THANKS DOUGLAS!!!! THANKS GRANT!!!!
-
Not sure but I think that was zoids baliwick. Not sure when he is coming back.
Maybe we should gangup on Douglas..........😈
-
Blimey you lot! Weeks of (im) patiently awaiting the knife and then as soon as it arrives it's all about the badge! :facepalm:
Relax and enjoy the knife for a while and then we'll get round to the badges. :cheers:
-
Blimey you lot! Weeks of (im) patiently awaiting the knife and then as soon as it arrives it's all about the badge! :facepalm:
Relax and enjoy the knife for a while and then we'll get round to the badges. :cheers:
Oooook, ( sadly shakes head ) still think it would be fun to :pok: :pok: :pok: Douglas........sigh....... :whistle:
-
...
-
(https://i.imgflip.com/224a7a.jpg) (https://imgflip.com/i/224a7a)via Imgflip Meme Generator (https://imgflip.com/memegenerator)
-
Bwaaaaaaawaaaaashaaaaahaaaaaaahaaaaaa
:rofl: :rofl: :rofl: :rofl:
-
Relax and a have some coffee while we wait...
(https://uploads.tapatalk-cdn.com/20180105/48f656abfc6634596430d1a121b46477.jpg)
-
Got mine in today. Looks great. Nice work guys on getting this all together!.
-
Guess what the postman dropped off this morning ... :mail:
Show content
(https://i.imgur.com/dYs0p9k.jpg)
Can't believe how fast it got here, I was hoping to have it by the end of next week, or maybe even the week after that ...
-
First pic, taken indoor with my smartphone and with poor lighting ...
(https://i.imgur.com/sRE1p7l.jpg)
Thank you Douglas and Grant for making this happen :hatsoff:.
-
Guess what the postman dropped off this morning ... :mail:
Show content
(https://i.imgur.com/dYs0p9k.jpg)
Can't believe how fast it got here, I was hoping to have it by the end of next week, or maybe even the week after that ...
Girlfriend has sent a pic asking if I was expecting a delivery...
Sender is: Defender web & tool :ahhh
Your postman is just as fast as mine :rofl:
-
Guess what the postman dropped off this morning ... :mail:
Show content
(https://i.imgur.com/dYs0p9k.jpg)
Can't believe how fast it got here, I was hoping to have it by the end of next week, or maybe even the week after that ...
Girlfriend has sent a pic asking if I was expecting a delivery...
Sender is: Defender web & tool :ahhh
Your postman is just as fast as mine :rofl:
Wow only 7 days? :like:
-
Yay!
Sent from my iPhone using Tapatalk
-
Guess what the postman dropped off this morning ... :mail:
Show content
(https://i.imgur.com/dYs0p9k.jpg)
Can't believe how fast it got here, I was hoping to have it by the end of next week, or maybe even the week after that ...
Girlfriend has sent a pic asking if I was expecting a delivery...
Sender is: Defender web & tool :ahhh
Your postman is just as fast as mine :rofl:
Wow only 7 days? :like:
I said so before, Grant launches his packages from an underground missile silo. No doubt.
-
Mine is here too...
Love the fact that I got the "1 of 100"
-
Mine is here too...
Love the fact that I got the "1 of 100"
Proof before words :whistle:
-
Mine is here too...
Love the fact that I got the "1 of 100"
Actually it's "1 of 102" :whistle:
-
My PX still hasn't shown up! (http://www.pic4ever.com/images/403fx8l.gif)
-
Mine is here too...
Love the fact that I got the "1 of 100"
Proof before words :whistle:
How about, you just believe me, I'm trusthworthy... :D :angel:
-
Mine is here too...
Love the fact that I got the "1 of 100"
Actually it's "1 of 102" :whistle:
Over-production is quite normal... or are you trying to say that 101/100 and 102/100 are even more desirable.
-
I got #111. :angel: :mail:
-
Mine is here too...
Love the fact that I got the "1 of 100"
Proof before words :whistle:
How about, you just believe me, I'm trusthworthy... :D :angel:
I'm actually willing to trade with 3/100, seeing as 3 is my lucky number.
-
Mine has arrived too :mail: :climber:
(https://uploads.tapatalk-cdn.com/20180105/68ca3f20a099d2f49246b1eda34a0e58.jpg)
-
Mine is here too...
Love the fact that I got the "1 of 100"
Proof before words :whistle:
How about, you just believe me, I'm trusthworthy... :D :angel:
Well you did keep your word on the RT...
Mine is no 100 :whistle:
-
:mail: it's here!! :mail:
(https://uploads.tapatalk-cdn.com/20180105/607b65347dc98d687e0cc1eb33a43d87.jpg)
Better pictures will follow later. It's dark outside and the lighting in our house is terrible for making pictures.
-
:mail:
Yipeeeee! :ahhh
The wonderful mail carrier just brought me my new 2016 MTo PX!!!
(https://i.imgur.com/KV5Xgx1.jpg)
Wonderful PX!
-
I can confirm that it was indeed the PX that arrived.
No pics...
It's the same as the others here...
Taking pics is just not possible indoors with these LED lights...
-
:mail:
Yipeeeee! :ahhh
The wonderful mail carrier just brought me my new 2016 MTo PX!!!
(https://i.imgur.com/KV5Xgx1.jpg)
Wonderful PX!
:drink: :drink: :tu:
-
(http://www.sherv.net/cm/emo/word/congrats-smiley-emoticon.gif) (http://www.sherv.net/) (http://www.sherv.net/cm/emo/happy/giving-thumbs-up-smiley-emoticon.gif) (http://www.sherv.net/) (http://www.sherv.net/cm/emoticons/yes/big-thumbs-up-smiley-emoticon.gif) (http://www.sherv.net/)
-
I can confirm that it was indeed the PX that arrived.
No pics...
It's the same as the others here...
Taking pics is just not possible indoors with these LED lights...
Outside isn't much better these days ... ::)
I've just had the week off from work, hoping to take some pics with my new camera since my old Canon EOS400D died last september, after I took pics from my Green 2017 Pioneer for the MTO calendar (that's why there were no more entries from me after September ;)). I've got a new battery for my old Canon, and now it works half of the time, and the other half it plays dead ... I'm keeping it for my boys, but I can't trust it anymore to be my only camera, if you know what I mean.
Anyway, since I got a new camera I was hoping on entering each month for the 2019 Calendar, but this weather is making me depressed ... ::)
-
:mail:
Yipeeeee! :ahhh
The wonderful mail carrier just brought me my new 2016 MTo PX!!!
(https://i.imgur.com/KV5Xgx1.jpg)
Wonderful PX!
Happy to hear it mate :cheers:.
I was starting to get a bit worried when I saw they had arrived in Europe today while yours was still "underway" ...
-
My MT is here!
(https://okeducationtruths.files.wordpress.com/2016/04/the-new-phone-books-are-here.gif)
-
I can confirm that it was indeed the PX that arrived.
No pics...
It's the same as the others here...
Taking pics is just not possible indoors with these LED lights...
Outside isn't much better these days ... ::)
I've just had the week off from work, hoping to take some pics with my new camera since my old Canon EOS400D died last september, after I took pics from my Green 2017 Pioneer for the MTO calendar (that's why there were no more entries from me after September ;)). I've got a new battery for my old Canon, and now it works half of the time, and the other half it plays dead ... I'm keeping it for my boys, but I can't trust it anymore to be my only camera, if you know what I mean.
Anyway, since I got a new camera I was hoping on entering each month for the 2019 Calendar, but this weather is making me depressed ... ::)
True...
Starting sunday the weather should be brighter and somewhat colder.
-
I can confirm that it was indeed the PX that arrived.
No pics...
It's the same as the others here...
Taking pics is just not possible indoors with these LED lights...
Outside isn't much better these days ... ::)
I've just had the week off from work, hoping to take some pics with my new camera since my old Canon EOS400D died last september, after I took pics from my Green 2017 Pioneer for the MTO calendar (that's why there were no more entries from me after September ;)). I've got a new battery for my old Canon, and now it works half of the time, and the other half it plays dead ... I'm keeping it for my boys, but I can't trust it anymore to be my only camera, if you know what I mean.
Anyway, since I got a new camera I was hoping on entering each month for the 2019 Calendar, but this weather is making me depressed ... ::)
True...
Starting sunday the weather should be brighter and somewhat colder.
Guess who's going back to work starting Monday ... :facepalm:
Oh well, maybe I'll get a chance to take some pics on Sunday.
-
I got mine this morning! Wasn't expecting it so fast :ahhh
A HUGE thank you to Douglas for arranging this for me! Thanks to Grant too for the über-fast shipping and the 2 pages of the Rona catalogue! I really miss my (other) home country so I always feel a pinch in my heart seeing items, albeit small and insignificant, that come from Canada...
-
I got mine this morning! Wasn't expecting it so fast :ahhh
A HUGE thank you to Douglas for arranging this for me! Thanks to Grant too for the über-fast shipping and the 2 pages of the Rona catalogue! I really miss my (other) home country so I always feel a pinch in my heart seeing items, albeit small and insignificant, that come from Canada...
+1 Thank you, Sir Douglas of Fresh ! :SAKnight:
I FEEL HAPPY!!!
(http://www.sherv.net/cm/emo/dancing/michael-jackson-dance-smiley-emoticon.gif) (http://www.sherv.net/)
-
(http://www.sherv.net/cm/emo/dancing/michael-jackson-dance-smiley-emoticon.gif) (http://www.sherv.net/)(http://www.sherv.net/cm/emo/funny/2/dance.gif) (http://www.sherv.net/)
-
Guys,
First, You are all welcome.
Second, I want to thank ALL OF YOU.
With out you ALL responding to the polls and supporing the idea this would not have been possible.
Third, I owe a
HUGE
Thanks to Grant for taking the crazy stirings of a relative NEWB in the forum family so seriously. Working on this with and for all of us has been an honor and TOTAL BLAST.
I also want to throw out a BIG thanks out to NIX.
On more than one occasion early on when things started getting slow he said just the right thing to keep me motivated.
Last
CONGRATULATIONS on a job well done everyone. :hatsoff:
-
This was a really great idea and well executed! Thank you all involved! :cheers:
MT.o Pioneer X with the gang.
-
Douglas, it was all you, brother. :hatsoff:
-
It turned out to be a little gem.
And I love the fact that Vic wrapped it in a special box!
-
Yes, thanks to everyone- especially Grant & Douglas. They came out great.
(https://lh3.googleusercontent.com/d59PglwcnfiLie4f77TXRkVOyb1NG9LrvlH8ONv8LuMGjSIjT-9wAeqsXNWDRHLzu13FizeTXSRrgv7Ty-lTi-SRwtJeutnYWDRC4xXTNFlRHiLOK-9rDIwetIXXs4IvgFWVSurz4NdqRU8gPas4tAoN_7iTYMPct5KL_atAXHnCc4CFpAvt0xUiQ6m5r3ir9Y3gMr9zh1fGLtLPQTJ0f_-xN67QGqKcWBi00Fc-UPs0YVk0V6nmyVXQFKKVHGL4Zdat4qngKAiOX81t7h9GtrIPH5752CFf34PAdwzgXTt-byKWnjS9ohNwbUmpO-iQ0gkzV_71c-G-SxS8TNxbQuGNYincxIY2-SzJHrqu-QSxrWxpsKAhDgO_QSHuk2vQOtnYQaUxi6-veiqTmICuItAIClZMSslyy6kQIm3ekpMfN5IyhSVT6jnJL-oSK_4fAWFNWw5Xz3-sadoXcd2_8acpZstUFXFSKsr7WyWPr3F1Hnz36pCw4njmiKwpsc5VMNWO3EmlTa6grRPW5xPXDM8c1NjHrcSB-WcuU9E8jZx4oUqmPDwyORxV-5O6R5yA_h5CTJNAtS7xdhe4qglew9B4J4GnFSP7ZUrfmcY=w477-h635-no)
Img may not work on mobile...
-
Hoping mine should be here this week :mail:
-
Just got home from work and the card is here telling to go pay the international package handling fee so I should have some if not all of mine tomorrow. :ahhh :ahhh :ahhh
Grant must have done his usual trick with the label so no customs charge to pay :tu:
-
Just got home from work and the card is here telling to go pay the international package handling fee so I should have some if not all of mine tomorrow. :ahhh :ahhh :ahhh
Grant must have done his usual trick with the label so no customs charge to pay :tu:
:2tu:
-
Good to hear, Kevin! :tu:
-
Hoping mine should be here this week :mail:
Who else is waiting for a 2016 MTo PX? (http://www.pic4ever.com/images/1436.gif)
-
I was, until today. Apparently a package has been delivered :mail:
-
Just got home from work and the card is here telling to go pay the international package handling fee so I should have some if not all of mine tomorrow. :ahhh :ahhh :ahhh
Grant must have done his usual trick with the label so no customs charge to pay :tu:
You have to pay customs and an international handling fee? That sucks! I'm glad I could at least save you one of the inappropriate governmental fondling! :police: :ahhh :police:
You all have no idea how happy I am to hear that they are all getting where they are going. I really won't rest easy until everyone has theirs safe and sound!
Now let's see some pics of everyone's new toys! :pok:
Def
-
You want pics?
:D
(https://uploads.tapatalk-cdn.com/20180108/b07be8a6ea8c9fd76fc955ecf903a526.jpg)(https://uploads.tapatalk-cdn.com/20180108/0f33c0970b3140fc950d691da78085b3.jpg)(https://uploads.tapatalk-cdn.com/20180108/6f945a0a09dda397ea79a331e8bc212f.jpg)(https://uploads.tapatalk-cdn.com/20180108/e446f5a491e00c6e6ceac27c7895d75f.jpg)(https://uploads.tapatalk-cdn.com/20180108/253c9ccbd45a4394d6a137fc7b4ffcd8.jpg)(https://uploads.tapatalk-cdn.com/20180108/c11c09d0c67d7c98a9e67b2bfd84b138.jpg)(https://uploads.tapatalk-cdn.com/20180108/5cdaa3a0d0d530b870237c84e79d7423.jpg)(https://uploads.tapatalk-cdn.com/20180108/c561f39703f9ea2753bf36a3c90288b0.jpg)(https://uploads.tapatalk-cdn.com/20180108/b3e2a01c42b16318faec992f7786c518.jpg)
-
:rofl: :like:
-
I added the victorinox red lanyard. :) (https://uploads.tapatalk-cdn.com/20180108/86173bd5c780c370e36b82185d4e03d7.jpg)
-
I added the victorinox red lanyard. :) (https://uploads.tapatalk-cdn.com/20180108/86173bd5c780c370e36b82185d4e03d7.jpg)
I did the same on one of mine yesterday, only difference is that my red lanyard has a black Victorinox logo on it 8).
The red lanyards look great on the MTO PX :tu:.
-
(https://i.imgur.com/nLliz0x.jpg)
(https://i.imgur.com/Gwbnpow.jpg)
(https://i.imgur.com/fmdirU1.jpg)
Thank you Grant & Douglas. :climber:
-
Just got home from work and the card is here telling to go pay the international package handling fee so I should have some if not all of mine tomorrow. :ahhh :ahhh :ahhh
Grant must have done his usual trick with the label so no customs charge to pay :tu:
You have to pay customs and an international handling fee? That sucks! I'm glad I could at least save you one of the inappropriate governmental fondling! :police: :ahhh :police:
You all have no idea how happy I am to hear that they are all getting where they are going. I really won't rest easy until everyone has theirs safe and sound!
Now let's see some pics of everyone's new toys! :pok:
Def
If it's a parcel that won't just post through the letter box I do. The calendar came straight to my house so no handling fee to pay as it was small enought to fit through a standard mail slot. For bigger parcels we have to pay £8 + tax for an international package handling fee. Your price labelling keeps it under the import duty threshold though :cheers:
-
Here's a couple for ya Grant....(https://uploads.tapatalk-cdn.com/20180109/5f49067319b97bf296eafaafcf4843f5.jpg)(https://uploads.tapatalk-cdn.com/20180109/dbe137cdcc61b8c7b94bde363c6a7a86.jpg)
Proud SAKMC member :)
-
Here Ya Go.
A couple befor I sent them off to their final homes.
-
Good mornng...
(https://uploads.tapatalk-cdn.com/20180109/c863ad5ee08a7dd7b46e4cb736d39095.jpg)
(https://uploads.tapatalk-cdn.com/20180109/353278bafad5c5835bee0e8c38f77b33.jpg)
Thanks again to Grant and Douglas for making this posible :hatsoff: :cheers:
-
Maybe I'm the last one.
It was so hard to wait so long.
But finally it's here! :mail:
And it is: A BEAUTY !
Many thanks to Grant and Doug for making this possible.
PS: No customs duties were harmed during making this transport happen. :whistle:
-
Maybe I'm the last one.
It was so hard to wait so long.
But finally it's here! :mail:
And it is: A BEAUTY !
Many thanks to Grant and Doug for making this possible.
PS: No customs duties were harmed during making this transport happen. :whistle:
:like:
-
I got mine today to :mail:
1 to carry, 1 for my collection, 1 for a future GAW prize
(https://farm5.staticflickr.com/4655/38890375614_6f6dd48b08_c.jpg) (https://flic.kr/p/22fBkKu)
(https://farm5.staticflickr.com/4663/38702502165_c5e9ba84de_c.jpg) (https://flic.kr/p/21Y1rw6)
(https://farm5.staticflickr.com/4671/38702507155_b5e30d0584_c.jpg) (https://flic.kr/p/21Y1t18)
-
Hoping mine should be here this week :mail:
Who else is waiting for a 2016 MTo PX? (http://www.pic4ever.com/images/1436.gif)
I am. Fingers and everything else crossed here !
-
I added the victorinox red lanyard. :) (https://uploads.tapatalk-cdn.com/20180108/86173bd5c780c370e36b82185d4e03d7.jpg)
I did the same on one of mine yesterday, only difference is that my red lanyard has a black Victorinox logo on it 8).
The red lanyards look great on the MTO PX :tu:.
Seems like geniuses think alike 8)
-
I added the victorinox red lanyard. :) (https://uploads.tapatalk-cdn.com/20180108/86173bd5c780c370e36b82185d4e03d7.jpg)
I did the same on one of mine yesterday, only difference is that my red lanyard has a black Victorinox logo on it 8).
The red lanyards look great on the MTO PX :tu:.
Seems like geniuses think alike 8)
I want to do the same but can't find the one I have yet
-
Maybe I'm the last one.
I think I know who will be last !! :mail:
... Eeyore of course.
PS. @Kevin - International package handling fee - What is that all about ???
I thought that is what postage costs covered
Seems like the PO as well as the taxman is out to rip us off
-
Maybe I'm the last one.
I think I know who will be last !! :mail:
Yours has the furthest to travel I'm betting
-
Thanks again, Douglas and Grant!!! :salute:
-
I added the victorinox red lanyard. :) (https://uploads.tapatalk-cdn.com/20180108/86173bd5c780c370e36b82185d4e03d7.jpg)
I did the same on one of mine yesterday, only difference is that my red lanyard has a black Victorinox logo on it 8).
The red lanyards look great on the MTO PX :tu:.
Seems like geniuses think alike 8)
I want to do the same but can't find the one I have yet
You're to late! :twak: :whistle:
-
I added the victorinox red lanyard. :) (https://uploads.tapatalk-cdn.com/20180108/86173bd5c780c370e36b82185d4e03d7.jpg)
I did the same on one of mine yesterday, only difference is that my red lanyard has a black Victorinox logo on it 8).
The red lanyards look great on the MTO PX :tu:.
Seems like geniuses think alike 8)
I want to do the same but can't find the one I have yet
You're to late! :twak: :whistle:
So that's where it went :twak:
-
Just got home from work and the card is here telling to go pay the international package handling fee so I should have some if not all of mine tomorrow. :ahhh :ahhh :ahhh
Grant must have done his usual trick with the label so no customs charge to pay :tu:
You have to pay customs and an international handling fee? That sucks! I'm glad I could at least save you one of the inappropriate governmental fondling! :police: :ahhh :police:
You all have no idea how happy I am to hear that they are all getting where they are going. I really won't rest easy until everyone has theirs safe and sound!
Now let's see some pics of everyone's new toys! :pok:
Def
If it's a parcel that won't just post through the letter box I do. The calendar came straight to my house so no handling fee to pay as it was small enought to fit through a standard mail slot. For bigger parcels we have to pay £8 + tax for an international package handling fee. Your price labelling keeps it under the import duty threshold though :cheers:
???
So even if it's below the import charge threshold and you don't have to pay taxes, you still have to pay the handling fee?
-
Just got home from work and the card is here telling to go pay the international package handling fee so I should have some if not all of mine tomorrow. :ahhh :ahhh :ahhh
Grant must have done his usual trick with the label so no customs charge to pay :tu:
You have to pay customs and an international handling fee? That sucks! I'm glad I could at least save you one of the inappropriate governmental fondling! :police: :ahhh :police:
You all have no idea how happy I am to hear that they are all getting where they are going. I really won't rest easy until everyone has theirs safe and sound!
Now let's see some pics of everyone's new toys! :pok:
Def
If it's a parcel that won't just post through the letter box I do. The calendar came straight to my house so no handling fee to pay as it was small enought to fit through a standard mail slot. For bigger parcels we have to pay £8 + tax for an international package handling fee. Your price labelling keeps it under the import duty threshold though :cheers:
???
So even if it's below the import charge threshold and you don't have to pay taxes, you still have to pay the handling fee?
Sometimes, yes. Not all the time, it seems to depend on its size. There are guidelines on royal mail website, but they don't always apply them for some reason.
Receiving mail from countries outside the UK
All mail that enters the UK may be examined by Customs. Normally letters, postcards and parcels containing only documents or similar forms of correspondence are excluded.
If you are receiving a parcel from a country outside the EU it may incur Customs charges. Any parcel assessed as being liable for Customs charges will also incur a Royal Mail handling fee of £8.
Any goods imported into the UK over the value of £15 are liable to import VAT. Gifts between private individuals over the value of £39 are also liable for VAT. Goods and gifts over these values may also be liable for customs duty. You no longer have to pay Customs duty for goods up to the value of £135, however you will still be required to pay import VAT and excise duty where applicable.
Please note these limits do not apply to alcohol and tobacco goods where both excise duty and import VAT may be charged. It is not permitted to send alcohol and tobacco products into the UK from another EU country unless prior arrangements have been made to account for the excise duty.
So it's vat on the item, and a package handling fee.
-
Still waiting .... :shrug:
-
How come you guys all got red ones and I got a green one? Not that I'm complaining.
(https://s10.postimg.org/4qibzafyh/MTO-_Pioneer-_X-green.jpg)
-
8) 8) 8) :like:
-
?? What, what ??
-
?? What, what ??
[cough]photoshop[/cough]
-
:rofl:
-
DUH......... :pok: :pok: :pok: :rofl:
-
:facepalm:
Those who are still waiting, I shall try to console y'awl with the pic below. Hope it helps. Hang in tight, not long now...
(https://uploads.tapatalk-cdn.com/20180110/20ef278a0e55dbb38e4560a4449302b4.jpg)
Sent on my SM-G930F with Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180111/ff7ac768a255f8198bc131e804d1c4b7.jpg)
-
:like:
-
found one of my red lanyards
(https://farm5.staticflickr.com/4676/27849891099_df0ca69728_c.jpg) (https://flic.kr/p/JqZYmc)
-
::) i need more Vic lanyards, especially red on red 🍎 :like:
-
(https://uploads.tapatalk-cdn.com/20180111/ff7ac768a255f8198bc131e804d1c4b7.jpg)
That's a great picture!
-
(https://uploads.tapatalk-cdn.com/20180111/ff7ac768a255f8198bc131e804d1c4b7.jpg)
That's a great picture!p
Thanks pomsbz :cheers:
-
Hurrah !!
The postman has left me a note to sort of the package charges. Clearly I must live out in the wilds to wait this long ....
Am I the last waiting patiently?
:mail:
-
I think I know who will be last !! :mail:
-
I think I know who will be last !! :mail:
Australia Austria and New Zealand are soo far away that they might as well be on another planet. :whistle:
-
I think I know who will be last !! :mail:
Australia Austria and New Zealand are soo far away that they might as well be on another planet. :whistle:
that applies for me, here in Spain. The antipodes of my city, Barcelona, is a point located approx 20km from Wellington's center. So literally New Zealanders are in the other side of the planet for me. :)
-
I think I know who will be last !! :mail:
Australia Austria and New Zealand are soo far away that they might as well be on another planet. :whistle:
that applies for me, here in Spain. The antipodes of my city, Barcelona, is a point located approx 20km from Wellington's center. So literally New Zealanders are in the other side of the planet for me. :)
From where I am, it's in the middle of the sea south of NZ, an uninteresting place. :facepalm:
-
Still NO postman, no package, no knife :(
Should I worry...??
-
Well I got a customs charge through my door this morning so fingers crossed
-
Still NO postman, no package, no knife :(
Should I worry...??
I wouldn't worry for at least a week or so yet
-
Still NO postman, no package, no knife :(
Should I worry...??
I wouldn't worry for at least a week or so yet
Where're you from EMZ?
EDIT:
flags on full site :facepalm:
The Netherlands...
Quite odd...
Mine arrived... last week I think...
In Belgium...
-
Still NO postman, no package, no knife :(
Should I worry...??
I wouldn't worry for at least a week or so yet
Where're you from EMZ?
The Netherlands. Not far from Belgium!
-
Still NO postman, no package, no knife :(
Should I worry...??
I wouldn't worry for at least a week or so yet
Where're you from EMZ?
The Netherlands. Not far from Belgium!
I edited my post after I viewed the regular site instead of Tapatalk...
See above :)
-
Well I got a customs charge through my door this morning so fingers crossed
Interesting. Nice to see they were keen enough to open and have a peek at mine. Don't blame them ... looking' good.
-
Well I got a customs charge through my door this morning so fingers crossed
Interesting. Nice to see they were keen enough to open and have a peek at mine. Don't blame them ... looking' good.
I'm flagged, any thing I order from outside the EU gets charged
-
Well I got a customs charge through my door this morning so fingers crossed
Interesting. Nice to see they were keen enough to open and have a peek at mine. Don't blame them ... looking' good.
I'm flagged, any thing I order from outside the EU gets charged
Must have been the all the rust and aluminium powder that you’ve bought. :whistle:
-
Worth the wait :like:
-
Worth the wait :like:
Yes it is, isn't it? :like:
-
Worth the wait :like:
:like:
-
+1 :tu:
-
Hurrah !!
The postman has left me a note to sort of the package charges. Clearly I must live out in the wilds to wait this long ....
Am I the last waiting patiently?
:mail:
No. I’m still waiting too
-
Hurrah !!
The postman has left me a note to sort of the package charges. Clearly I must live out in the wilds to wait this long ....
Am I the last waiting patiently?
:mail:
No. I’m still waiting too
I think all this waiting is a "keep the faith" thing :salute:
-
Oh to have some spare cash right now.... ::)
-
Mine has just made it through the door.
(https://uploads.tapatalk-cdn.com/20180115/1d9553dd269ba06d38700926058a5069.jpg)
-
:like:
-
:like: :like:
-
:like: :cheers: :cheers:
-
Mine has just made it through the door.
(https://uploads.tapatalk-cdn.com/20180115/1d9553dd269ba06d38700926058a5069.jpg)
:2tu:
Worth the wait, right ? ;)
-
Mine has just made it through the door.
(https://uploads.tapatalk-cdn.com/20180115/1d9553dd269ba06d38700926058a5069.jpg)
:2tu:
Worth the wait, right ? ;)
Of course :tu:
-
Mine has just made it through the door.
(https://uploads.tapatalk-cdn.com/20180115/1d9553dd269ba06d38700926058a5069.jpg)
:2tu:
Worth the wait, right ? ;)
Of course :tu:
:cheers:
-
Worth the wait :like:
Awlsome, Phil!!!! :ahhh
Next question: are you going to carry it? :think:
-
Mines just got it's first small dink on the scales. I let the engineer in the office opposite mine use the scissors and when she closed them she dropped it. Once bounce and it hit the metal foot of my desk and has it's first small dink on it. It's only tiny but still annoyed me.
-
Mines just got it's first small dink on the scales. I let the engineer in the office opposite mine use the scissors and when she closed them she dropped it. Once bounce and it hit the metal foot of my desk and has it's first small dink on it. It's only tiny but still annoyed me.
Is she still alive?
-
Mines just got it's first small dink on the scales. I let the engineer in the office opposite mine use the scissors and when she closed them she dropped it. Once bounce and it hit the metal foot of my desk and has it's first small dink on it. It's only tiny but still annoyed me.
Is she still alive?
yep she's still alive. This is my carry one so expect it to get dings and scratches. It still annoyed me that she dropped it though.
I have another tucked away to keep as a shelf queen.
-
Mines just got it's first small dink on the scales. I let the engineer in the office opposite mine use the scissors and when she closed them she dropped it. Once bounce and it hit the metal foot of my desk and has it's first small dink on it. It's only tiny but still annoyed me.
Is she still alive?
yep she's still alive. This is my carry one so expect it to get dings and scratches. It still annoyed me that she dropped it though.
I have another tucked away to keep as a shelf queen.
Weak victorinox anodising.... ::)
And why don't people handle stuff that's not theirs more carefully? ::)
-
Mines just got it's first small dink on the scales. I let the engineer in the office opposite mine use the scissors and when she closed them she dropped it. Once bounce and it hit the metal foot of my desk and has it's first small dink on it. It's only tiny but still annoyed me.
Is she still alive?
yep she's still alive. This is my carry one so expect it to get dings and scratches. It still annoyed me that she dropped it though.
I have another tucked away to keep as a shelf queen.
Weak victorinox anodising.... ::)
And why don't people handle stuff that's not theirs more carefully? ::)
I do indeed wish that the Victorinox anodising was rather stronger....
-
yeah.... It's a drag. Doesn't seem to look as bad on black...
Or it's kind of an either way thing... like it kinda sucks when you have essentially new-looking alox with an unsightly scratch or two but it starts to have more character as the scratches and dings start to take over.
I've only carried the MTO PX once then it was straight into the 30SAK/DAY challenge...
-
Agreed. One scratch is unsightly, but 20-200 dings is character. I like the way the red Alox ages and wears. I'm in the Spirit challenge, so mine is in a drawer for now.
Side story: I was out on a military field exercise when I was young, innocent, and nice. I had an old Camilus Pilot's survival knife with me. These get issued in a sorry state, but after a few hours work, mine looked great and was razor sharp. I had thought these things were junk, but with a little love, they are really nice knives. Anyway, my battle buddy asks to borrow my knife (he didn't bring one along). Of course I lend it to him. He proceeds to use it to dig up a root that is annoying him in his sleeping position. Like this knife is a pick-axe or something. My beautiful edge is reduced to a saw with rounded off teeth.
After that, I'm no longer young, innocent, or nice. I never lend a knife to anyone. NEVER. If someone needs something cut, I do it for them or tell them to bring a knife next time.
-
Abuse!!! Abuse!
People awlways want to use the main blade for anything that's not cutting :facepalm:
-
One of my colleagues once asked me for my knife. Looking at what he was doing, I figured he needed a screwdriver, not a knife, so I asked him why he didn´t ask for a screwdriver instead. All I got was a puzzled look and a stupid answer.
´Who cares?´
Well I care. And I didn´t lend him anything that time, nor ever afterwards.
-
That makes you smarter than I am...but I learned very quickly. :rofl:
-
Worth the wait :like:
Awlsome, Phil!!!! :ahhh
Next question: are you going to carry it? :think:
Oh yes Dan of late I've been thinking there's something to this Alox thing. The Red X will awlways be in my rotation now :cheers:
-
One of my colleagues once asked me for my knife. Looking at what he was doing, I figured he needed a screwdriver, not a knife, so I asked him why he didn´t ask for a screwdriver instead. All I got was a puzzled look and a stupid answer.
´Who cares?´
Well I care. And I didn´t lend him anything that time, nor ever afterwards.
I'm going to follow your example if someone asks me for a tool. 8)
-
Mine arrived today. Thanks to everyone who made it happen. :tu: Really like the colour. Classy boxing too.
-
Yep - The PXs finally hit Australia :mail:
Eeyore is happy :D
.... Now is anyone still waiting ???
-
Agreed. One scratch is unsightly, but 20-200 dings is character. I like the way the red Alox ages and wears. I'm in the Spirit challenge, so mine is in a drawer for now.
Snip
Alex wears so well. These obviously aren’t red, but black wears in quite nicely as well.
-
Yep - The PXs finally hit Australia :mail:
Eeyore is happy :D
.... Now is anyone still waiting ???
Yes... It still has't arrived. I'm getting more worried every day while it isn't here... :cry:
-
Yep - The PXs finally hit Australia :mail:
Eeyore is happy :D
.... Now is anyone still waiting ???
Yes... It still has't arrived. I'm getting more worried every day while it isn't here... :cry:
Uh oh. :cry:
-
Well it didn´t mistakenly show up at my place. That rules out one possibility.
Is there no track and trace on the shipment?
-
Mine arrived today. Thanks to everyone who made it happen. :tu: Really like the colour. Classy boxing too.
:tu: :like: Glad it got there! Sure is nice, huh? :D
-
:dd:
Mine arrived today. Thanks to everyone who made it happen. :tu: Really like the colour. Classy boxing too.
:tu: :like: Glad it got there! Sure is nice, huh? :D
Sure is
-
Finally got my hand on mine :ahhh :ahhh :ahhh (came home before me)
I am super happy with the light etching on the blade, I feared it would be bolder, but here : it is perfect!
I am less happy with the factory dent in the Victorinox shield, :twak:
-
Finally got my hand on mine :ahhh :ahhh :ahhh (came home before me)
I am super happy with the light etching on the blade, I feared it would be bolder, but here : it is perfect!
I am less happy with the factory dent in the Victorinox shield, :twak:
Looks like someone at Victorinox hit it with a tiny chisel. :facepalm:
-
That does kind of glare out at you. Maybe it could be traded for one of the extras they sent.
Of course it could be the factory trying out the new Pabloed look......... :pok: :pok:
-
That does kind of glare out at you. Maybe it could be traded for one of the extras they sent.
Of course it could be the factory trying out the new Pabloed look......... :pok: :pok:
I'm not saying anything that might implicate myself.
:whistle:
-
That does kind of glare out at you. Maybe it could be traded for one of the extras they sent.
Of course it could be the factory trying out the new Pabloed look......... :pok: :pok:
I'm not saying anything that might implicate myself.
:whistle:
:rofl: :rofl: :rofl: :oops:
-
nah, keeping it as is
not gonna pay another 27€ of postage :facepalm: for a small dent, this will be a imperfect shelf queen :pommel:
and I am very happy with the coin and the traveler that is almost new old stock (tools like new, scales are 'drawer worn')
thank you again Grant !
-
Yes, its here :-)
(https://lh3.googleusercontent.com/QrK6NEHFHRVZLMfdIKKBUDCX3D8NCQN4fELAGQIAWjIGJa5LZceNRlH4Pvl8suJq6OfTMEj4mdFxFVK5qRfNcNEuJJnb__bHgOW5VCr5SFWaiwJuiubqCyjdH8cuqAfQvbtm28OjkvOh0TnwYn4uyz3NGBUSbMHGcuMOXTkGF7wUxNI774fajjD8txwL_DZJgCi3ZR0gi2H4TMipaB_coX_kWUiK6STct1ciROyG-KAdSAijTo7rdE5rckd6Ack4CZyqoGULuuyJiiWzE8fLW1hEYfzHXc5AHFUQkTUoxy8WBir4EVwNW4Wiu-oVhOymMPPUHwjQccGHCpaH7YC38vsfsoQ4VP8zhI9i6c9zGPpXtwT71m8gTbEU7roKgLHZWJvhnW35oJvFH6rBC5Jq0mf4FH_fzL-_79Cpfa2y0dv7RFjLlIYOO5WJ3S3_lZ48JKo3pd5jLHnrshps9Em0ZRXQ44_qH4lmibc6kOCe6PbGtiAzcWytkBImRxtkhCHyxamqxAyHrK24e0CiQ81-5IQUbG7E3gE0gAlfHngF6LiTdboE2_m_fdo4N-NlW79iqw9qY2CJ0lpZUZcsHymP03TEztjC-3-MSU71fdbzt4zbMYoFwW0ARCYgP-oZaos-dSunIpLneN-JpxvZbSpedKDWoV5bHW9J=w1337-h891-no)
-
:tu: :like:
-
Nice!
-
Wow, they look great, congrats. :tu: :like:
Badges awarded to:
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kevin Davey
18 - Dutch_Tooler
19 - smiller43147
20 - raistlin65
21 - coSAK
22 - Marc_in_NS
23 - glenfiddich1983
24 - ColoSwiss
25 - MusicMen
26 - EMZ
27 - scott4526
28 - zrxoa1
29 - Top-Gear-24
30 - Syem
For peeps like Steve, mrynnr, powernoodle etc that weren't on the list but want the badges - holler and I'll hook yous up.
-
Zoidberg!!!!! Ahhh ahhh ahhh. Yes please on be badge :tu:
Sent from my iPhone using Tapatalk
-
Three badges for the snow ninja... awarded. :cheers:
-
Wow, they look great, congrats. :tu: :like:
Badges awarded to:
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kevin Davey
18 - Dutch_Tooler
19 - smiller43147
20 - raistlin65
21 - coSAK
22 - Marc_in_NS
23 - glenfiddich1983
24 - ColoSwiss
25 - MusicMen
26 - EMZ
27 - scott4526
28 - zrxoa1
29 - Top-Gear-24
30 - Syem
For peeps like Steve, mrynnr, powernoodle etc that weren't on the list but want the badges - holler and I'll hook yous up.
https://forum.multitool.org/index.php/topic,74486.msg1617565.html#msg1617565
:pok: :D
-
You're after the badges Smashie?
-
Wow, they look great, congrats. :tu: :like:
Badges awarded to:
01 - Blackbeard
02 - Butch
03 - El Corkscrew
04 - Nix
05 - Douglas
06 - italophil
07 - T14
08 - m47mu74nt
09 - gustophersmob
10 - Huntsman
11 - gerleatherberman
12 - redmond
13 - Monrogue
14 - Fast Bill
15 - koke
16 - Mechanickal
17 - Kevin Davey
18 - Dutch_Tooler
19 - smiller43147
20 - raistlin65
21 - coSAK
22 - Marc_in_NS
23 - glenfiddich1983
24 - ColoSwiss
25 - MusicMen
26 - EMZ
27 - scott4526
28 - zrxoa1
29 - Top-Gear-24
30 - Syem
For peeps like Steve, mrynnr, powernoodle etc that weren't on the list but want the badges - holler and I'll hook yous up.
Thanks for the badges Zoidberg :salute:.
Glad to see you back mate ;).
-
Thanks for the badges Zoidberg :salute:.
Glad to see you back mate ;).
Just a short visit to watch the NFL playoffs. :cheers:
-
Zoidberg's back! :woohoo: :woohoo: :cheers:
-
Great, I have a badge!!
But still no knife.... :o
-
Zoidberg's back! :woohoo: :woohoo: :cheers:
:cheers:
and Thanks Zoid' !
-
Thanks zoid... :salute:
-
Thanks Zman! Good to see you popping in buddy :tu:
Proud SAKMC member :)
-
Thank you Mr. Z........... :tu: :like:
-
Great, I have a badge!!
But still no knife.... :o
Who else is still waiting?
Def
-
Thanks Dr. Z
-
Mine has just made it through the door.
(https://uploads.tapatalk-cdn.com/20180115/1d9553dd269ba06d38700926058a5069.jpg)
Awarded the one you requested. :tu: Would you also like the alox with scissors one?
-
Mine has just made it through the door.
(https://uploads.tapatalk-cdn.com/20180115/1d9553dd269ba06d38700926058a5069.jpg)
Awarded the one you requested. :tu: Would you also like the alox with scissors one?
Bugger missed that one :facepalm:
-
Mine has just made it through the door.
(https://uploads.tapatalk-cdn.com/20180115/1d9553dd269ba06d38700926058a5069.jpg)
Awarded the one you requested. :tu: Would you also like the alox with scissors one?
Bugger missed that one :facepalm:
Done. :cheers:
-
Mine finally cleared customs today. Did not manage to sneak under the customs radar, but that was expected. :cheers:
Now I just need to figure out what mods to make from it :think:
-T
30 sec unboxing video:
https://youtu.be/CfCybtfWBPA
-
:ahhh :ahhh :ahhh :drool: :drool:
It isn't ALMOST here, no it IS here!!! :climber:
This afternoon my knife finally arrived! :mail:
It is BEAUTIFUL!
Thanks again for all the troubles you went through in arranging this for us.
-
Wow, that took a while. Glad you were patient, I believe it was worth the wait.
Say, just out of curiosity, do you live on some remote island? :pok:
-
Wow, that took a while. Glad you were patient, I believe it was worth the wait.
Say, just out of curiosity, do you live on some remote island? :pok:
I don't think he does. But he does live under the ocean :think:
-
Wow, that took a while. Glad you were patient, I believe it was worth the wait.
Say, just out of curiosity, do you live on some remote island? :pok:
I don't think he does. But he does live under the ocean :think:
Yes, The Netherlands are below sea level mostly. But we have a very fast mail service. The delay must have been caused by something else.
-
Wow, that took a while. Glad you were patient, I believe it was worth the wait.
Say, just out of curiosity, do you live on some remote island? :pok:
I don't think he does. But he does live under the ocean :think:
Yes, The Netherlands are below sea level mostly. But we have a very fast mail service. The delay must have been caused by something else.
You've drawn that yourself Ron? :D
-
If mags' U-boat is currently in The Channel, that would explain alot.
Did anyone spot a large rust stain on the water somewhere nearby?
-
Wow, that took a while. Glad you were patient, I believe it was worth the wait.
Say, just out of curiosity, do you live on some remote island? :pok:
I don't think he does. But he does live under the ocean :think:
Yes, The Netherlands are below sea level mostly. But we have a very fast mail service. The delay must have been caused by something else.
You've drawn that yourself Ron? :D
Haha, no I´m not that much of an artist. I just entered ´mailman shark´ in Google. You never know what you get when you enter weird combinations like that.
-
If mags' U-boat is currently in The Channel, that would explain alot.
Did anyone spot a large rust stain on the water somewhere nearby?
The u-boat is still alive, but I’m patching leaks left and right, up and down, forwards and back, because of mags’ loud music. :facepalm:
-
If mags' U-boat is currently in The Channel, that would explain alot.
Did anyone spot a large rust stain on the water somewhere nearby?
The u-boat is still alive, but I’m patching leaks left and right, up and down, forwards and back, because of mags’ loud music. :facepalm:
(http://www.sherv.net/cm/emoticons/ships/golden-submarine-smiley-emoticon.gif) (http://www.sherv.net/)(http://www.sherv.net/cm/emoticons/ships/golden-submarine-smiley-emoticon.gif) (http://www.sherv.net/)(http://www.sherv.net/cm/emoticons/ships/golden-submarine-smiley-emoticon.gif) (http://www.sherv.net/)(http://www.sherv.net/cm/emoticons/ships/golden-submarine-smiley-emoticon.gif) (http://www.sherv.net/)(http://www.sherv.net/cm/emoticons/ships/golden-submarine-smiley-emoticon.gif) (http://www.sherv.net/)(http://www.sherv.net/cm/emoticons/ships/golden-submarine-smiley-emoticon.gif) (http://www.sherv.net/)
-
Wow, that took a while. Glad you were patient, I believe it was worth the wait.
Say, just out of curiosity, do you live on some remote island? :pok:
I don't think he does. But he does live under the ocean :think:
Yes, The Netherlands are below sea level mostly. But we have a very fast mail service. The delay must have been caused by something else.
You've drawn that yourself Ron? :D
Haha, no I´m not that much of an artist. I just entered ´mailman shark´ in Google. You never know what you get when you enter weird combinations like that.
You mean like if you enter "multitool madness" in Google, and the crab and animal multitools comes up?
(https://images.esellerpro.com/2243/I/407/69/GADGET511-crab-multi-tool%20(4).JPG)
(https://images.esellerpro.com/2243/I/420/06/GADGET549-animal-multi-tool%20(5).JPG)
:D
-
Wow, that took a while. Glad you were patient, I believe it was worth the wait.
Say, just out of curiosity, do you live on some remote island? :pok:
I don't think he does. But he does live under the ocean :think:
Yes, The Netherlands are below sea level mostly. But we have a very fast mail service. The delay must have been caused by something else.
You've drawn that yourself Ron? :D
Haha, no I´m not that much of an artist. I just entered ´mailman shark´ in Google. You never know what you get when you enter weird combinations like that.
You mean like if you enter "multitool madness" in Google, and the crab and animal multitools comes up?
(https://images.esellerpro.com/2243/I/407/69/GADGET511-crab-multi-tool%20(4).JPG)
(https://images.esellerpro.com/2243/I/420/06/GADGET549-animal-multi-tool%20(5).JPG)
:D
It's even better if I post the animated versions
(https://cdn.shopify.com/s/files/1/1140/3964/products/Animal-Multi-Tool-B-2_1024x1024.gif)
(https://cdn.shopify.com/s/files/1/1140/3964/products/CrabMultitool_Full-1_1024x1024.gif)
Multitool MADNESS!!!
-
Has everyone got theirs now?
-
Has everyone got theirs now?
If I reply with "no", do I get another one?
~ahem~ I mean, will I get mine after all? :whistle:
-
Has everyone got theirs now?
If I reply with "no", do I get another one?
~ahem~ I mean, will I get mine after all? :whistle:
:megaslap:
Now go to the naughty step
-
Has everyone got theirs now?
If I reply with "no", do I get another one?
~ahem~ I mean, will I get mine after all? :whistle:
:megaslap:
Now go to the naughty step
Again??
-
Has everyone got theirs now?
If I reply with "no", do I get another one?
~ahem~ I mean, will I get mine after all? :whistle:
:megaslap:
Now go to the naughty step
Again??
More like "as usual" :rofl:
-
Has everyone got theirs now?
If I reply with "no", do I get another one?
~ahem~ I mean, will I get mine after all? :whistle:
:megaslap:
Now go to the naughty step
Again??
More like "as usual" :rofl:
I hear someone has poured fresh cement on it... >:D
-
If you haven't gotten yours yet, this is your last chance. There are two left, and I'd like to have one for myself, which means ONE left. If it belongs to someone I'd like to know, if not, I'd like to find someone for it to belong to. :D
Def
-
ha! :climber:
Never expected to have this unique one at my door
(https://i.imgur.com/bhWT9k0.jpg)
This time even if Kirky is around, I blame Nix!
(https://i.imgur.com/V8b5Fli.jpg)
He sent this to me as a gift...and what a surprise! I never joined the thread because I wasn't going to get one for me, too many things in between this beauty and me,
(https://i.imgur.com/VTJAYZx.jpg)
(https://i.imgur.com/AO8LrsE.jpg)
but I followed vevry page of it and drooled over your pics folks.
Drool no more, thanks to Nix!! :hatsoff:
Here the Wrench, ZT and Buck 110 he also gifted me.
I feel ashamed of so many gifts for no apparent reason, :oops: but won't let this pretty ponies die in a shelf, I'll carry and use them as it was meant to be! :tu:
(https://i.imgur.com/wwt7BfJ.jpg)
-
ha! :climber:
Never expected to have this unique one at my door
(https://i.imgur.com/bhWT9k0.jpg)
This time even if Kirky is around, I blame Nix!
(https://i.imgur.com/V8b5Fli.jpg)
He sent this to me as a gift...and what a surprise! I never joined the thread because I wasn't going to get one for me, too many things in between this beauty and me,
(https://i.imgur.com/VTJAYZx.jpg)
(https://i.imgur.com/AO8LrsE.jpg)
but I followed vevry page of it and drooled over your pics folks.
Drool no more, thanks to Nix!! :hatsoff:
Here the Wrench, ZT and Buck 110 he also gifted me.
I feel ashamed of so many gifts for no apparent reason, :oops: but won't let this pretty ponies die in a shelf, I'll carry and use them as it was meant to be! :tu:
(https://i.imgur.com/wwt7BfJ.jpg)
Wow, those are all gifts?!? :o
Really nice, Nix :cheers:
And congrats Peacent! :like:
-
thanks! Yes those are all gifts :)
and as far as the PX is concerned, you know what they say...
(https://i.imgur.com/Qm8ewD2.jpg)
ain't truly yours until it bites you :ahhh
(https://i.imgur.com/UU7XRNR.jpg)
-
finally arrived, I am happy :-)
Thanks guys :like: :like:
(https://www2.pic-upload.de/img/34776868/IMG_09832.jpg) (https://www.pic-upload.de)
(https://www2.pic-upload.de/img/34776899/IMG_09812.jpg) (https://www.pic-upload.de)
-
Nice. Great shot!
:like:
-
Nice, worth the wait :salute: :tu:
-
(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)
finally arrived, I am happy :-)
Thanks guys :like: :like:
(https://www2.pic-upload.de/img/34776868/IMG_09832.jpg) (https://www.pic-upload.de)
(https://www2.pic-upload.de/img/34776899/IMG_09812.jpg) (https://www.pic-upload.de)
:like: :like: :tu: :cheers:
-
(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)
finally arrived, I am happy :-)
Thanks guys :like: :like:
(https://www2.pic-upload.de/img/34776868/IMG_09832.jpg) (https://www.pic-upload.de)
(https://www2.pic-upload.de/img/34776899/IMG_09812.jpg) (https://www.pic-upload.de)
:like: :like: :tu: :cheers:
Nice, worth the wait :salute: :tu:
Nice. Great shot!
:like:
Danke guys :cheers: :cheers: :tu:
-
(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)(http://www.pic4ever.com/images/banana_smiley_34.gif)
finally arrived, I am happy :-)
Thanks guys :like: :like:
(https://www2.pic-upload.de/img/34776868/IMG_09832.jpg) (https://www.pic-upload.de)
(https://www2.pic-upload.de/img/34776899/IMG_09812.jpg) (https://www.pic-upload.de)
:like: :like: :tu: :cheers:
Nice, worth the wait :salute: :tu:
Nice. Great shot!
:like:
Danke guys :cheers: :cheers: :tu:
Bitte :tu:
-
ain't all MT.org engraved tools a beauty? :climber:
be it a Pioneer, or a Rebar,
(https://i.imgur.com/wnItZYZ.jpg)
these are a rare breed worth preserving :salute:
-
CONGRATULATIONS EVERYONE!!
This is a bitter sweet post for me. Grant just informed me there are NO more MTo Px's available. The last one shipped out today.
THANK YOU ALL!! This has been so much fun and gone way better than I could have dreamed way back when I started the first poll. It has been truely wonderfull watching as each of you placed your orders and the excitement grew with each order placed. Then every one waiting with "Worm on Tongue" Baited Breath (for those of you who are to young to remember Mork from Ork)
(https://img.buzzfeed.com/buzzfeed-static/static/2014-08/12/7/enhanced/webdr04/original-grid-image-15869-1407844263-22.jpg?crop=1024:1536;0,4&downsize=715:*&output-format=auto&output-quality=auto)
ALL That has only been surpassed by the excited photo posts as you each found the post had delivered your new 2016 T.O.Y. (pun intended). Now I guess we will all be off to the next great adventure.
Wonder what that might be?
-
CONGRATULATIONS EVERYONE!!
This is a bitter sweet post for me. Grant just informed me there are NO more MTo Px's available. The last one shipped out today.
THANK YOU ALL!! This has been so much fun and gone way better than I could have dreamed way back when I started the first poll. It has been truely wonderfull watching as each of you placed your orders and the excitement grew with each order placed. Then every one waiting with "Worm on Tongue" Baited Breath (for those of you who are to young to remember Mork from Ork)
(https://img.buzzfeed.com/buzzfeed-static/static/2014-08/12/7/enhanced/webdr04/original-grid-image-15869-1407844263-22.jpg?crop=1024:1536;0,4&downsize=715:*&output-format=auto&output-quality=auto)
ALL That has only been surpassed by the excited photo posts as you each found the post had delivered your new 2016 T.O.Y. (pun intended). Now I guess we will all be off to the next great adventure.
Wonder what that might be?
Ok, now just so everyone knows, he has always been full of bullooney................... :facepalm: :rofl:
-
CONGRATULATIONS EVERYONE!!
This is a bitter sweet post for me. Grant just informed me there are NO more MTo Px's available. The last one shipped out today.
THANK YOU ALL!! This has been so much fun and gone way better than I could have dreamed way back when I started the first poll. It has been truely wonderfull watching as each of you placed your orders and the excitement grew with each order placed. Then every one waiting with "Worm on Tongue" Baited Breath (for those of you who are to young to remember Mork from Ork)
(https://img.buzzfeed.com/buzzfeed-static/static/2014-08/12/7/enhanced/webdr04/original-grid-image-15869-1407844263-22.jpg?crop=1024:1536;0,4&downsize=715:*&output-format=auto&output-quality=auto)
ALL That has only been surpassed by the excited photo posts as you each found the post had delivered your new 2016 T.O.Y. (pun intended). Now I guess we will all be off to the next great adventure.
Wonder what that might be?
Thanks for all the hard work everyone put into making it happen
Oh and there'll be a chance for one more in a couple of weeks or so (possibly sooner if I get post happy). When I join the ALNC I've got one for a GAW :tu: :D
-
CONGRATULATIONS EVERYONE!!
This is a bitter sweet post for me. Grant just informed me there are NO more MTo Px's available. The last one shipped out today.
THANK YOU ALL!! This has been so much fun and gone way better than I could have dreamed way back when I started the first poll. It has been truely wonderfull watching as each of you placed your orders and the excitement grew with each order placed. Then every one waiting with "Worm on Tongue" Baited Breath (for those of you who are to young to remember Mork from Ork)
(https://img.buzzfeed.com/buzzfeed-static/static/2014-08/12/7/enhanced/webdr04/original-grid-image-15869-1407844263-22.jpg?crop=1024:1536;0,4&downsize=715:*&output-format=auto&output-quality=auto)
ALL That has only been surpassed by the excited photo posts as you each found the post had delivered your new 2016 T.O.Y. (pun intended). Now I guess we will all be off to the next great adventure.
Wonder what that might be?
Thanks for all the hard work everyone put into making it happen
Oh and there'll be a chance for one more in a couple of weeks or so (possibly sooner if I get post happy). When I join the ALNC I've got one for a GAW :tu: :D
:like:
-
Just because : color comparison between OC Pioneer et MTo2016 PX :
(https://forum.multitool.org/index.php?action=dlattach;topic=53842.0;attach=357247)
-
Just because : color comparison between OC Pioneer et MTo2016 PX :
(https://forum.multitool.org/index.php?action=dlattach;topic=53842.0;attach=357247)
now someone has to come and say they see that as orange... :facepalm:
-
Just because : color comparison between OC Pioneer et MTo2016 PX :
(https://forum.multitool.org/index.php?action=dlattach;topic=53842.0;attach=357247)
now someone has to come and say they see that as orange... :facepalm:
Or 2018LE 'CHERRY' :whistle:
-
salmon pink? :)
-
salmon pink? :)
Mmmmmm...no...I think the PX is "Candy Apple Red" and the OC is "Del Fuego Red."
:rofl:
-
I don't know what you guys are talking about regarding color. ??? ??? Mine is green!
(https://s10.postimg.org/4qibzafyh/MTO-_Pioneer-_X-green.jpg)
-
oh, yes, the lesser spotted Irish version :)
-
oh, yes, the lesser spotted Irish version :)
Oh, I thought I had the eco friendly/sustainability color support version. I don't want the Irish version. ;) Let me change it to blue:
(https://s20.postimg.org/tkplh9865/MTO-_Pioneer-_X-blue.jpg)
-
:rofl:
-
raistlin, you've got me thinking we should a second run of these........ :gimme:
-
raistlin, you've got me thinking we should a second run of these........ :gimme:
I suspect that Grant might be tired of shipping packages. If so, maybe we could get Massdrop to get us a different color run?
-
raistlin, you've got me thinking we should a second run of these........ :gimme:
I suspect that Grant might be tired of shipping packages. If so, maybe we could get Massdrop to get us a different color run?
Maybe raistlin's PX changes colour depending on temperature?
Pour hot water over it to get it red.
Cold to get it blue.
Average to get it green 8)
-
raistlin, you've got me thinking we should a second run of these........ :gimme:
I suspect that Grant might be tired of shipping packages. If so, maybe we could get Massdrop to get us a different color run?
Maybe raistlin's PX changes colour depending on temperature?
Pour hot water over it to get it red.
Cold to get it blue.
Average to get it green 8)
I don't know about Grant or temperature changing colors but I would be all for a blue MTo alox. :SAKnight: Love the Blue Electrician my oldest son just gave me. :tu: :tu: Other colors would be cool too. :pok: :pok:
-
2018 edition MTo Pioneer X? In Blue Alox?
I'm in. >:D
-
2018 edition MTo Pioneer X? In Blue Alox?
I'm in. >:D
Sense we have the 2016 PX how about a 2017 Cadet in Black and a 2018 Farmer in Blue?? :drool: :drool:
-
:facepalm:
Like I need another SAK.......
I'm x 2.
:gimme: :gimme:
-
The Cadet is an awlsome EDC or adjunct knife to pair with heftier tools. :pok:
Everybody needs one....or three.
-
So sould we let Grant in on this ????
(https://media.giphy.com/media/GwSWbBDaZyAUw/giphy.gif)
But first dose anybody know how we could hide a camera to catch his reaction? :whistle:
-
Who is selling theirs ???
https://www.ebay.de/itm/Victorinox-Alox-Pioneer-X-Multitool-org-Limited-Edition/362260537434?_trkparms=aid%3D888007%26algo%3DDISC.MBE%26ao%3D1%26asc%3D49928%26meid%3D105d60361ffe4b6fbadddabdd1326a1e%26pid%3D100009%26rk%3D1%26rkt%3D2%26sd%3D382401223127%26itm%3D362260537434&_trksid=p2047675.c100009.m1982
Nice profit !!!
-
Who is selling theirs ???
https://www.ebay.de/itm/Victorinox-Alox-Pioneer-X-Multitool-org-Limited-Edition/362260537434?_trkparms=aid%3D888007%26algo%3DDISC.MBE%26ao%3D1%26asc%3D49928%26meid%3D105d60361ffe4b6fbadddabdd1326a1e%26pid%3D100009%26rk%3D1%26rkt%3D2%26sd%3D382401223127%26itm%3D362260537434&_trksid=p2047675.c100009.m1982
Nice profit !!!
The seller is selling other coloured alox knives as well.
Might have just bought it from the MTO store, not being a member.
-
2018 edition MTo Pioneer X? In Blue Alox?
I'm in. >:D
Nooooooooo I just bought a blue alox PX
how about orange?
-
Who is selling theirs ???
https://www.ebay.de/itm/Victorinox-Alox-Pioneer-X-Multitool-org-Limited-Edition/362260537434?_trkparms=aid%3D888007%26algo%3DDISC.MBE%26ao%3D1%26asc%3D49928%26meid%3D105d60361ffe4b6fbadddabdd1326a1e%26pid%3D100009%26rk%3D1%26rkt%3D2%26sd%3D382401223127%26itm%3D362260537434&_trksid=p2047675.c100009.m1982
Nice profit !!!
The seller is selling other coloured alox knives as well.
Might have just bought it from the MTO store, not being a member.
Go back through a page or two.
-
Who is selling theirs ???
https://www.ebay.de/itm/Victorinox-Alox-Pioneer-X-Multitool-org-Limited-Edition/362260537434?_trkparms=aid%3D888007%26algo%3DDISC.MBE%26ao%3D1%26asc%3D49928%26meid%3D105d60361ffe4b6fbadddabdd1326a1e%26pid%3D100009%26rk%3D1%26rkt%3D2%26sd%3D382401223127%26itm%3D362260537434&_trksid=p2047675.c100009.m1982
Nice profit !!!
Hello Huntsman,
it is my auction.
I recently bought a Damascus 2010 and needed money now.
I had ordered two Multitool knives, one to trade and one for me.
-
Who is selling theirs ???
https://www.ebay.de/itm/Victorinox-Alox-Pioneer-X-Multitool-org-Limited-Edition/362260537434?_trkparms=aid%3D888007%26algo%3DDISC.MBE%26ao%3D1%26asc%3D49928%26meid%3D105d60361ffe4b6fbadddabdd1326a1e%26pid%3D100009%26rk%3D1%26rkt%3D2%26sd%3D382401223127%26itm%3D362260537434&_trksid=p2047675.c100009.m1982
Nice profit !!!
Hello Huntsman,
it is my auction.
I recently bought a Damascus 2010 and needed money now.
I had ordered two Multitool knives, one to trade and one for me.
Nice! :o :cheers:
-
Whatever the color, Farmer X please!
-
Whatever the color, Farmer X please!
Your PX hasn't even arrived yet...
-
Who is selling theirs ???
https://www.ebay.de/itm/Victorinox-Alox-Pioneer-X-Multitool-org-Limited-Edition/362260537434?_trkparms=aid%3D888007%26algo%3DDISC.MBE%26ao%3D1%26asc%3D49928%26meid%3D105d60361ffe4b6fbadddabdd1326a1e%26pid%3D100009%26rk%3D1%26rkt%3D2%26sd%3D382401223127%26itm%3D362260537434&_trksid=p2047675.c100009.m1982
Nice profit !!!
Hello Huntsman,
it is my auction.
I recently bought a Damascus 2010 and needed money now.
I had ordered two Multitool knives, one to trade and one for me.
Nice! :o :cheers:
:cheers:
-
Whatever the color, Farmer X please!
Your PX hasn't even arrived yet...
Wishes like this take time to turn into reality
-
Hello Huntsman,
It is my auction.
I recently bought a Damascus 2010 and needed money now.
........
I'll bet you do !!! :o Wow
-
Hello Huntsman,
It is my auction.
I recently bought a Damascus 2010 and needed money now.
........
I'll bet you do !!! :o Wow
Glad you still have one! Though I would like a dedicated MTO PX shelf queen, there is significant satisfaction in carrying it.
-
Glad you still have one! Though I would like a dedicated MTO PX shelf queen, there is significant satisfaction in carrying it.
+1, all around. :tu:
-
Hello Huntsman,
It is my auction.
I recently bought a Damascus 2010 and needed money now.
........
I'll bet you do !!! :o Wow
Glad you still have one! Though I would like a dedicated MTO PX shelf queen, there is significant satisfaction in carrying it.
What ever the reason, it's good to see this thread still alive. And amazing to see the excitement over Kevin's GAW thread. The Px is quite an MTo success. :tu: :tu:
-
Is there an official Victorinox production code for this fine knife?
It should actually be something with 0.8231.20
-
Good question coSAK - I don't know.
Douglas organised this and he is not very active anymore - But I think the boss man - Def/Grant - did the liason with Victorinox
I suspect there would not be a number as the quantity is so small - If there was, would it be something like 0.8231.J20M
Isn't J a special edition? ??? - Or is that just the Damascus series? And M for MTo :D
-
Isn't J a special edition? ??? - Or is that just the Damascus series? And M for MTo :D
I assume J stands for "Jahr" (year in German) and afaik it is only used for the Damascus series.
...
.J18 ... 2018
.J19 ... 2019
.J20 ... 2020
...
-
I missed that! Dammit.
Στάλθηκε από το MAR-LX1A μου χρησιμοποιώντας Tapatalk
-
Good question coSAK - I don't know.
Douglas organised this and he is not very active anymore - But I think the boss man - Def/Grant - did the liason with Victorinox
I suspect there would not be a number as the quantity is so small - If there was, would it be something like 0.8231.J20M
Isn't J a special edition? ??? - Or is that just the Damascus series? And M for MTo :D
The wiki says that R is the special run code. :dunno: