Post by: SteveC on July 04, 2018, 02:40:47 PM
So introducing Wood Handled Wednesday - All are welcome - folders, fixed, traditionals , machetes :D
Camillus Sword Brand today :tu:
(https://i.imgur.com/ZKEKQS5h.jpg)
Post by: ThePeacent on July 04, 2018, 02:54:41 PM
(https://i.imgur.com/4ms1Qmx.jpg)
Post by: Barry Rowland on July 04, 2018, 03:32:40 PM
Post by: Barry Rowland on July 04, 2018, 03:35:26 PM
Post by: SteveC on July 04, 2018, 05:47:55 PM
Post by: Barry Rowland on July 04, 2018, 07:30:57 PM
Post by: Ron Who on July 04, 2018, 08:40:40 PM
Will post pics later.
Post by: LoopCutter on July 04, 2018, 09:22:00 PM
Post by: Ray S on July 04, 2018, 10:40:37 PM
The second one I got yesterday and I again thought it was jigged bone until I got looking at it under a loupe.
Post by: SteveC on July 04, 2018, 10:53:54 PM
Post by: SteveC on July 04, 2018, 10:54:26 PM
Woohoo, i have a couple of bucks
You carrying both of those today ? :like:
Post by: LoopCutter on July 05, 2018, 12:58:38 AM
You carrying both of those today ? :like:The Wave was on my belt through the morning until lunch. My matched set, also have a 112, but that would be to much! The 55 is riding in front right pocket and the 110 rode in the pouch in back right along with walking stick as I ventured through Eagle March near by to see if I could spot the nesting bald eagles. Found the nest but not the birds. Temps in upper 90s with feel like temps near 105. Shower to cool off and rinse off bug spray.
Post by: SteveC on July 05, 2018, 01:12:40 AM
You carrying both of those today ? :like:The Wave was on my belt through the morning until lunch. My matched set, also have a 112, but that would be to much! The 55 is riding in front right pocket and the 110 rode in the pouch in back right along with walking stick as I ventured through Eagle March near by to see if I could spot the nesting bald eagles. Found the nest but not the birds. Temps in upper 90s with feel like temps near 105. Shower to cool off and rinse off bug spray.
:like: :tu:
Post by: Barry Rowland on July 05, 2018, 03:24:28 AM
Post by: Ray S on July 05, 2018, 05:38:00 AM
Nice Ray are you carrying those today ? :like:
I carried the Altenbach today but the Olcut isn;t my cup of tea for everyday carry.I have a herd of wood handled knives but posted these because they were a bit unusual. Have to look and see if I have any more unusual ones.
Post by: ThePeacent on July 05, 2018, 01:52:23 PM
(https://i.imgur.com/F0Q7G86.jpg)
Post by: SteveC on July 05, 2018, 06:35:40 PM
Post by: SteveC on July 11, 2018, 01:09:10 PM
Post by: SteveC on July 11, 2018, 03:15:06 PM
(https://i.imgur.com/1Mb8W0fh.jpg)
Post by: Dean51 on July 11, 2018, 04:59:53 PM
Remington for WHW !>:D Nice wood. :D
(https://i.imgur.com/1Mb8W0fh.jpg)
Post by: Ron Who on July 11, 2018, 05:01:51 PM
For WHW and many other days...
The Hartkopf double pen knife with ebony handles is my favorite traditional / gentleman´s knife.
Post by: Dean51 on July 11, 2018, 05:01:57 PM
(https://i.imgur.com/d6ykyvT.jpg)
Post by: Dean51 on July 11, 2018, 05:03:15 PM
Nice thread Steve! It´ll take quite a few Wednesdays to show off my collection here! :DThat;s perfect as a gentleman's knife :like:
For WHW and many other days...
The Hartkopf double pen knife with ebony handles is my favorite traditional / gentleman´s knife.
Post by: SteveC on July 11, 2018, 06:36:07 PM
Nice thread Steve! It´ll take quite a few Wednesdays to show off my collection here! :D
For WHW and many other days...
The Hartkopf double pen knife with ebony handles is my favorite traditional / gentleman´s knife.
Thanks Ron and nice pen knife ! :cheers:
Luckily there are plenty of Wednesdays ;) :D :tu:
Post by: SteveC on July 11, 2018, 06:37:12 PM
Queen #69 Walnut.
(https://i.imgur.com/d6ykyvT.jpg)
Nice grain on that Barlow ! :like:
Post by: David on July 11, 2018, 11:21:49 PM
Post by: SteveC on July 11, 2018, 11:34:12 PM
Lovely ! :dd:
Post by: Poncho65 on July 12, 2018, 01:06:26 AM
Post by: Ray S on July 12, 2018, 01:47:37 AM
Post by: SteveC on July 12, 2018, 01:54:08 AM
Post by: SteveC on July 12, 2018, 01:54:26 AM
Great thread Steve :like: I will see what I have for next week :salute: :like:
Thanks buddy ! :cheers:
Post by: Dean51 on July 12, 2018, 02:29:51 AM
Here is one that I used to carry a lot because of it's light weight. Never could get into Buck 110's because they felt too handle heavy for me and my hand would cramp with heavy use. This is a Gerber Model 1 (also called the Gunstock model).Very light in weight and very sturdy. I stopped carrying it when I found out the ridiculous prices they were selling for;especially in Japan.Very interesting I've never seen that before. :tu:
Post by: Ray S on July 12, 2018, 03:58:29 AM
Post by: Ron Who on July 17, 2018, 09:51:08 PM
Post by: SteveC on July 18, 2018, 01:22:25 AM
Post by: cody6268 on July 18, 2018, 04:09:46 AM
Here is another one I used to carry a lot.It is actually lighter than it looks. Made by Track Knives for Ithaca Gun Works this one was purchased well used at a flea market for $5 about 30 years ago. Blade was very pitted;probably from having animal blood left on it after being used.Serial # 775 with Ithaca logo(stylized bear paw) Cleaned up nicely and holds a mean edge(convex ground). No nail mark(not needed) and it locks up solid when opened. I still carry it occasionally and it is light enough to comfortably carry in the pocket.
Nice one! I have an Ithaca 20GA Super Single that was my great-uncles that I've been learning how to shoot (most of my life, I've messed with air rifles and .22s). Remington, Beretta, Winchester, and Remington knives seem pretty easy to find, but these Ithaca ones aren't, especially cheap. That's why I mostly collect Camillus and Bear and Sons Remingtons (and I do have a beat up, but original 1930s Remington BSA).
Post by: zoidberg on July 18, 2018, 07:01:06 AM
(https://farm2.staticflickr.com/1808/41673350480_168fa739e1_b.jpg) (https://flic.kr/p/26uwPdL)
(https://farm1.staticflickr.com/926/42576239745_c60936fd3c_b.jpg) (https://flic.kr/p/27SjmK4)
Post by: Ray S on July 18, 2018, 08:20:51 AM
First up is an Italian stiletto(non-automatic)that is around 8 inches(20cm)long CLOSED! Nice wood handles(not sure exactly what type of wood);brass bolsters and a handful to carry!
Next is a navaja style knife almost 9 inches(23cm)long with wood scales jigged to look like bone and some fancy acid etched designs on the blade. Top lock is a ratcheting mechanism allowing the blade to lock in a number of positions.
Next is everyone's favorites here: An Opinel No.2 and No.13 together. Sort of like a mother and child pose. :D
And last is a totally wood knife made as a display piece(I guess)for the Catawba Valley Knife Club. No idea where that is;I bought it on e-Bay many years ago.
Post by: SteveC on July 18, 2018, 02:43:24 PM
Post by: SteveC on July 18, 2018, 02:43:56 PM
Spent a few hours today with the older kid cutting in a new section of track down the river.Show content(https://farm2.staticflickr.com/1808/41673350480_168fa739e1_b.jpg) (https://flic.kr/p/26uwPdL)
(https://farm1.staticflickr.com/926/42576239745_c60936fd3c_b.jpg) (https://flic.kr/p/27SjmK4)
Nice pics ! :like:
Post by: SteveC on July 18, 2018, 03:31:43 PM
(https://i.imgur.com/641q42rh.jpg)
Post by: Dean51 on July 18, 2018, 04:41:32 PM
WHW !
(https://i.imgur.com/641q42rh.jpg)
Steve, that's a good choice for WHW :D
Post by: Dean51 on July 18, 2018, 04:43:16 PM
(https://i.imgur.com/8HwkjjO.jpg)
Post by: Ray S on July 18, 2018, 05:31:45 PM
I don't carry a lot of wood but these are my favorites.]
Dean:What is that bottom knife? That is one fine looking knife! :like:
Post by: Dean51 on July 18, 2018, 06:23:50 PM
Thanks Ray. :salute:I don't carry a lot of wood but these are my favorites.]
Dean:What is that bottom knife? That is one fine looking knife! :like:
It's a GEC #43 trapper, Cocobolo wood.
Post by: Ron Who on July 18, 2018, 07:50:58 PM
Post by: SteveC on July 18, 2018, 08:22:03 PM
Post by: David on July 18, 2018, 10:40:47 PM
Post by: Dean51 on July 18, 2018, 11:05:20 PM
How bout some Walnut and Desert Ironwood:drool:
That desert iron wood is purdy.
Post by: Poncho65 on July 19, 2018, 12:54:53 AM
Post by: Ray S on July 19, 2018, 04:41:50 AM
Post by: SteveC on July 19, 2018, 05:51:14 AM
Post by: Barry Rowland on July 19, 2018, 03:41:58 PM
Post by: Barry Rowland on July 25, 2018, 02:48:56 PM
Post by: Dean51 on July 25, 2018, 03:18:47 PM
No. 8 today. It's Wood Handled Wednesday!! :ahhh :ahhhNow that's wood. :tu: :tu:
Post by: Dean51 on July 25, 2018, 03:23:05 PM
(https://i.imgur.com/slIO83g.jpg)
Post by: SteveC on July 25, 2018, 03:37:25 PM
What size is it ?
Post by: SteveC on July 25, 2018, 03:37:46 PM
No. 8 today. It's Wood Handled Wednesday!! :ahhh :ahhh
Classic Opie ! :like: :tu:
Post by: SteveC on July 25, 2018, 03:40:40 PM
(https://i.imgur.com/5yF5lREh.jpg)
Post by: Dean51 on July 25, 2018, 03:45:41 PM
(https://i.imgur.com/5yF5lREh.jpg)
I thought we'd see that 78 today. :drool:
The coperhead is 3 3/4"
Post by: SteveC on July 25, 2018, 03:50:20 PM
(https://i.imgur.com/5yF5lREh.jpg)
I thought we'd see that 78 today. :drool:
The copperhead is 3 3/4"
Great blade combo, I love the shape of Queens clip point :tu: :tu:
Post by: Antti Lammi on July 25, 2018, 05:44:15 PM
https://flic.kr/p/29tKAUz (https://flic.kr/p/29tKAUz)
Only Tools Matters
Post by: SteveC on July 25, 2018, 06:09:40 PM
Post by: Ron Who on July 25, 2018, 07:09:56 PM
I got it with a 50% discount at the first Dutch Knife Exhibition, now 12 years ago. I just had to have it.
https://www.europeanblades.com/dutch-knife-exhibition-2018/
Post by: SteveC on July 25, 2018, 07:46:43 PM
Post by: Poncho65 on July 25, 2018, 09:17:00 PM
Mine :tu:
(https://farm1.staticflickr.com/845/41824082740_95fa0288d2_k.jpg) (https://flic.kr/p/26HRmEQ)20180725_082120 (https://flic.kr/p/26HRmEQ) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Post by: David on July 25, 2018, 10:40:45 PM
Post by: SteveC on July 25, 2018, 11:10:17 PM
Some great pics guys :dd: :like:
Mine :tu:Show content(https://farm1.staticflickr.com/845/41824082740_95fa0288d2_k.jpg) (https://flic.kr/p/26HRmEQ)20180725_082120 (https://flic.kr/p/26HRmEQ) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Nice lil Buck ! :tu:
Calf Roper
Nice ! :dd: :drool:
Post by: Dean51 on July 26, 2018, 01:29:33 AM
Wood WednesdayIt's nice seeing a well used tool. :tu: :tu:
https://flic.kr/p/29tKAUz (https://flic.kr/p/29tKAUz)
Only Tools Matters
Post by: Dean51 on July 26, 2018, 01:30:17 AM
I love the combination of wood and damascus. I have several, but the Fox500D was my first and is the only one that gets carried and used.
I got it with a 50% discount at the first Dutch Knife Exhibition, now 12 years ago. I just had to have it.
https://www.europeanblades.com/dutch-knife-exhibition-2018/
Wood and damascus is perfect for that knife. :tu: :tu:
Post by: Poncho65 on July 27, 2018, 01:23:03 AM
Post by: SteveC on August 01, 2018, 03:53:43 PM
(https://i.imgur.com/KNnC7uWh.jpg)
Post by: Barry Rowland on August 02, 2018, 12:44:07 AM
Post by: SteveC on August 02, 2018, 05:51:40 AM
Post by: Poncho65 on August 02, 2018, 12:11:23 PM
Post by: SteveC on August 03, 2018, 02:15:27 AM
Post by: David on August 03, 2018, 03:03:26 AM
It's WHW !
(https://i.imgur.com/KNnC7uWh.jpg)
8) :like:
Post by: Gerhard Gerber on August 03, 2018, 10:51:08 AM
I like wood as well, just as long as I don't have to work with it!
Post by: SteveC on August 08, 2018, 03:10:29 PM
(https://i.imgur.com/CW0fKyNh.jpg)
Post by: Barry Rowland on August 09, 2018, 03:10:56 PM
Post by: SteveC on August 15, 2018, 03:28:09 PM
Post by: Dean51 on August 16, 2018, 02:20:25 AM
Post by: Barry Rowland on August 16, 2018, 10:56:38 PM
Post by: SteveC on August 17, 2018, 12:05:47 AM
Post by: SteveC on August 29, 2018, 03:06:51 PM
Post by: David on August 29, 2018, 11:07:16 PM
(https://i.imgur.com/vllQRBuh.jpg)
8) pic! :like:
Post by: David on August 29, 2018, 11:10:47 PM
Post by: SteveC on August 29, 2018, 11:30:17 PM
Nice old crosscut saw :tu:
Post by: David on August 30, 2018, 01:30:27 AM
(https://i.imgur.com/vllQRBuh.jpg)
Good pic! :like:
Post by: SteveC on August 30, 2018, 01:48:25 AM
Post by: MadPlumbarian on August 30, 2018, 03:23:04 AM
JR
Post by: SteveC on August 30, 2018, 05:55:25 AM
Post by: Barry Rowland on August 31, 2018, 05:25:29 PM
I only think I have one wood handle knife :think:
JR
Post by: MadPlumbarian on August 31, 2018, 06:11:22 PM
Nice Trapper JR ! :like: :tu:Thanks, it’s a Orange Curly Zebra Wood, the first time I saw it I was :drool: besides it was a trapper, to top it off I saw the sheath which had the
T
R
A
P
P
E
R
On it and the wife was that looks nice, it’s a shame they don’t do initials to match what I put on the bolster, so she called the place and sure enough they said they don’t but we just ordered the equipment, it should be in within a few days, so she went all out for a gift for me..
JR
Post by: RF52 on August 31, 2018, 06:43:58 PM
Sent fra min FRD-L09 via Tapatalk
Post by: MadPlumbarian on August 31, 2018, 07:49:41 PM
JR
Post by: SteveC on September 05, 2018, 08:58:41 PM
Post by: Fuzzbucket on September 05, 2018, 09:33:55 PM
Post by: David on September 05, 2018, 10:00:47 PM
Post by: Barry Rowland on September 05, 2018, 10:11:36 PM
Post by: David on September 06, 2018, 02:24:51 AM
Nice one David! My 110 is making an appearance for Wood Handled Wednesday!
Nice 110 Barry!
Post by: David on September 06, 2018, 02:25:54 AM
(https://i.imgur.com/p9yEr8Xh.jpg)
Super cool Jack knife! :like:
Post by: Barry Rowland on September 07, 2018, 02:16:28 AM
Post by: SteveC on September 07, 2018, 02:47:30 AM
What a simple, but very beautiful knife Stevey. :salute:
Thanks buddy !
(https://i.imgur.com/p9yEr8Xh.jpg)
Super cool Jack knife! :like:
:cheers:
Post by: SteveC on September 07, 2018, 02:49:29 AM
Nice one David! My 110 is making an appearance for Wood Handled Wednesday!
Nice 110 Barry!
+1. :like:
Post by: Barry Rowland on September 07, 2018, 04:34:42 PM
Post by: Spartan19 on September 19, 2018, 04:50:37 PM
Post by: SteveC on September 19, 2018, 04:55:39 PM
Post by: SteveC on September 19, 2018, 04:56:06 PM
Camillus Sword Brand
(https://i.imgur.com/Zc0i8vZh.jpg)
Post by: Barry Rowland on September 19, 2018, 05:14:21 PM
Post by: Spartan19 on September 19, 2018, 08:11:17 PM
Post by: SteveC on September 20, 2018, 01:22:52 AM
Post by: Spartan19 on September 21, 2018, 12:52:10 AM
:like: :tu:
Thanks man! :cheers:
Post by: Ray S on September 27, 2018, 03:43:33 AM
Post by: Barry Rowland on September 27, 2018, 04:25:41 AM
Post by: SteveC on September 27, 2018, 05:55:07 AM
Nice job !
Post by: Poncho65 on September 27, 2018, 12:10:49 PM
Post by: Barry Rowland on September 27, 2018, 05:53:44 PM
Post by: SteveC on October 03, 2018, 03:28:38 PM
Post by: Spartan19 on October 03, 2018, 07:02:46 PM
Post by: Barry Rowland on October 03, 2018, 09:46:48 PM
Post by: toolguy on October 03, 2018, 09:52:49 PM
Congrats to all of the owners.
This is a Puma 725 four star ****.It's the size of a Buck 112 Ranger. The handle had some rather obvious and large cracks. So I was able to buy it at 60 to 70% below retail.I resolved,to a large degree the "cracks" issue.This was 25 years ago.I still have the green and yellow plastic box in which it was shipped from Germany.
(http://i66.tinypic.com/2eoimxk.jpg)
Post by: Dean51 on October 03, 2018, 11:49:10 PM
:like:Show content(https://i.imgur.com/z3Gkgxlh.jpg)
There are some awesome knives posted here.:like:
Congrats to all of the owners.
This is a Puma 725 four star ****.It's the size of a Buck 112 Ranger. The handle had some rather obvious and large cracks. So I was able to buy it at 60 to 70% below retail.I resolved,to a large degree the "cracks" issue.This was 25 years ago.I still have the green and yellow plastic box in which it was shipped from Germany.Show content(http://i66.tinypic.com/2eoimxk.jpg)
:o :like: :like: Packing my new kabar barlow sent to me by my good friend SteveC. Thanks Steve and great pic! :salute::like:
Post by: Dean51 on October 03, 2018, 11:50:48 PM
#35 and Shuffler
Post by: SteveC on October 04, 2018, 12:00:54 AM
Post by: SteveC on October 04, 2018, 12:01:20 AM
There are some awesome knives posted here.
Congrats to all of the owners.
This is a Puma 725 four star ****.It's the size of a Buck 112 Ranger. The handle had some rather obvious and large cracks. So I was able to buy it at 60 to 70% below retail.I resolved,to a large degree the "cracks" issue.This was 25 years ago.I still have the green and yellow plastic box in which it was shipped from Germany.
(http://i66.tinypic.com/2eoimxk.jpg)
Nice ! :like:
Post by: SteveC on October 04, 2018, 12:02:21 AM
:o :like: :like: Packing my new kabar barlow sent to me by my good friend SteveC. Thanks Steve and great pic! :salute:
You're welcome ! :cheers:
Post by: toolguy on October 04, 2018, 12:25:42 AM
I actually remembered wood Wednesday. :D
#35 and Shuffler
:like:
Tell us about that Barlow with the screw construction.
Post by: Dean51 on October 04, 2018, 06:17:26 PM
It's become my favorite, the One,I actually remembered wood Wednesday. :D
#35 and Shuffler
:like:
Tell us about that Barlow with the screw construction.
They're made by Lionsteel for Collectorsknives.net, you'll have to sign in to see the pre orders.
Spear, Clip and sheeps foot blades, 3 3/4 " closed. Titanium liners and bolsters, M390 blade.
Take it apart and make new scales if you want.
(https://i.imgur.com/QfktEcs.jpg)
Post by: toolguy on October 04, 2018, 07:38:02 PM
It's become my favorite, the One,I actually remembered wood Wednesday. :D
#35 and Shuffler
:like:
Tell us about that Barlow with the screw construction.
They're made by Lionsteel for Collectorsknives.net, you'll have to sign in to see the pre orders.
Spear, Clip and sheeps foot blades, 3 3/4 " closed. Titanium liners and bolsters, M390 blade.
Take it apart and make new scales if you want.
(https://i.imgur.com/QfktEcs.jpg)
Got it,thanks.
Post by: G-Dizzle on October 04, 2018, 07:55:45 PM
Looks easy to clean after using on fish or other such things. Any multiple bladed models?It's become my favorite, the One,I actually remembered wood Wednesday. :D
#35 and Shuffler
:like:
Tell us about that Barlow with the screw construction.
They're made by Lionsteel for Collectorsknives.net, you'll have to sign in to see the pre orders.
Spear, Clip and sheeps foot blades, 3 3/4 " closed. Titanium liners and bolsters, M390 blade.
Take it apart and make new scales if you want.
(https://i.imgur.com/QfktEcs.jpg)
Post by: Dean51 on October 04, 2018, 10:06:05 PM
No multi blade options, with M390 that might start getting a little pricey.Looks easy to clean after using on fish or other such things. Any multiple bladed models?It's become my favorite, the One,I actually remembered wood Wednesday. :D
#35 and Shuffler
:like:
Tell us about that Barlow with the screw construction.
They're made by Lionsteel for Collectorsknives.net, you'll have to sign in to see the pre orders.
Spear, Clip and sheeps foot blades, 3 3/4 " closed. Titanium liners and bolsters, M390 blade.
Take it apart and make new scales if you want.
(https://i.imgur.com/QfktEcs.jpg)
Maybe someday something will come about.
Post by: David on October 05, 2018, 01:46:31 AM
I actually remembered wood Wednesday. :D
#35 and Shuffler
Beautiful pair of knives! :like:
Post by: toolguy on October 06, 2018, 02:35:48 AM
Post by: SteveC on October 10, 2018, 06:32:45 PM
Ebony Churchill
(https://i.imgur.com/VQsNamCh.jpg)
Post by: toolguy on October 10, 2018, 07:26:53 PM
It's WHW ! :tu:
Ebony Churchill
(https://i.imgur.com/VQsNamCh.jpg)
That rascal is sweet,Steve.
Post by: toolguy on October 10, 2018, 07:43:07 PM
The Gerber family was very influential in the knife business for decades.Knife makers such as Pete Kershaw and Al Mar once worked for Pete Gerber,before they struck out on their own to start their companies.
Post by: SteveC on October 10, 2018, 08:02:23 PM
Nice silking in the grain on that one !
Post by: toolguy on October 10, 2018, 10:35:39 PM
My picture doesn't do it justice.
Post by: toolguy on October 10, 2018, 10:55:04 PM
Post by: David on October 11, 2018, 02:08:45 AM
Post by: David on October 11, 2018, 02:12:57 AM
This is a Gerber Magnum Folding Hunter from 1983.I still have the receipt and box for this knife among other knives that I bought at the same time.
The Gerber family was very influential in the knife business for decades.Knife makers such as Pete Kershaw and Al Mar once worked for Pete Gerber,before they struck out on their own to start their companies.
Nice Gerber ToolGuy! :like: I once owned one of those. Bought in the late seventies if I remember correctly. I was a good knife but had trouble with the fingers grooves so I eventually sold it to someone.
Post by: toolguy on October 11, 2018, 03:00:17 AM
Some Desert Ironwood for WHW
Nice one David.
I like desert ironwood as well.
Post by: toolguy on October 11, 2018, 03:01:50 AM
Nice Gerber ToolGuy! :like: I once owned one of those. Bought in the late seventies if I remember correctly. I was a good knife but had trouble with the fingers grooves so I eventually sold it to someone.
I bought two of these in 1983.I gave one to a guy who was working for me.He did such an outstanding job that month,that I felt he deserved something special.
Post by: SteveC on October 11, 2018, 03:37:40 AM
Some Desert Ironwood for WHW
:like:
Post by: Ray S on October 11, 2018, 03:54:12 AM
Post by: SteveC on October 11, 2018, 04:13:05 AM
Post by: clown on October 11, 2018, 05:51:05 AM
Post by: SteveC on October 17, 2018, 10:29:42 PM
Post by: NutSAK on October 17, 2018, 10:51:31 PM
(https://farm6.staticflickr.com/5777/30133688690_01ba04d5ce_o.jpg)
Post by: toolguy on October 17, 2018, 11:14:15 PM
(https://i.imgur.com/2lLUxRoh.jpg)
Very nice color and contrasting streaks,Steve.
Looks like Cocobolo.
Here is a custom by David Boye with desert ironwood for the handle.The shot of the handle looks as if the wood is rough but it's not.It's as smooth a a baby's bottom.LOL It's the depth and contrasting color that gives that appearance.
Post by: toolguy on October 17, 2018, 11:16:32 PM
My BEM Dogleg Jack is with me again today.
(https://farm6.staticflickr.com/5777/30133688690_01ba04d5ce_o.jpg)
I like the shape of the main blade. Good-on-ya.
The wood is a bit confusing,though.
Post by: SteveC on October 17, 2018, 11:33:15 PM
Post by: NutSAK on October 17, 2018, 11:38:25 PM
My BEM Dogleg Jack is with me again today.
(https://farm6.staticflickr.com/5777/30133688690_01ba04d5ce_o.jpg)
I like the shape of the main blade. Good-on-ya.
The wood is a bit confusing,though.
I can see why you might say that. Bird's eye maple is difficult to reproduce well in a picture. It's gorgeous, and even a bit mesmerizing in person though, with a lot of depth in the figure, similar to a burl without the knots.
Post by: toolguy on October 17, 2018, 11:49:39 PM
Thanks tg ! and another beauty from you :like: :tu:
You're welcome.
By the way,the handle on this Boye is the most ergonomic handle and best feeling handle on many knives that I own.I bought this drop point hunter from David a little more than 30 years ago.
Post by: toolguy on October 17, 2018, 11:50:57 PM
My BEM Dogleg Jack is with me again today.
(https://farm6.staticflickr.com/5777/30133688690_01ba04d5ce_o.jpg)
I like the shape of the main blade. Good-on-ya.
The wood is a bit confusing,though.
I can see why you might say that. Bird's eye maple is difficult to reproduce well in a picture. It's gorgeous, and even a bit mesmerizing in person though, with a lot of depth in the figure, similar to a burl without the knots.
I like birds eye maple.
Post by: Dean51 on October 18, 2018, 12:49:28 AM
:iagree: I don't know why you birds eye is not used more.My BEM Dogleg Jack is with me again today.
(https://farm6.staticflickr.com/5777/30133688690_01ba04d5ce_o.jpg)
I like the shape of the main blade. Good-on-ya.
The wood is a bit confusing,though.
I can see why you might say that. Bird's eye maple is difficult to reproduce well in a picture. It's gorgeous, and even a bit mesmerizing in person though, with a lot of depth in the figure, similar to a burl without the knots.
I like birds eye maple.
Post by: David on October 18, 2018, 01:17:04 AM
Post by: SteveC on October 18, 2018, 01:46:38 AM
Post by: NutSAK on October 18, 2018, 03:54:42 AM
:rofl:
Post by: Dean51 on October 18, 2018, 02:33:22 PM
Hey Dean, I said "mesmerizing" not "acid trip"!
:rofl:
You mean there's a difference :o
Post by: NutSAK on October 18, 2018, 04:32:19 PM
Post by: SteveC on October 24, 2018, 04:46:50 PM
Post by: David on October 24, 2018, 05:23:22 PM
(https://i.imgur.com/Z6s2j3Ch.jpg)
Nice Cammie Jack! :like:
Post by: David on October 24, 2018, 05:24:43 PM
Post by: SteveC on October 24, 2018, 06:01:46 PM
Post by: toolguy on October 24, 2018, 08:14:37 PM
(https://i.imgur.com/Z6s2j3Ch.jpg)
Nice one Steve.
Post by: toolguy on October 24, 2018, 08:15:41 PM
Calf Roper
Good one David.
I'm curious about the second blade.
Post by: toolguy on October 24, 2018, 08:18:03 PM
Post by: Ray S on October 24, 2018, 11:29:12 PM
#1 Camillus 4 line knife/spoon combo given to troops by the Red Cross in WWI----A Frederick Hartkopf & Sons gardener's knife----an unmarked knife for a tool kit with interchangeable blades.
#2 Holley jumbo jack----Waterville Cutlery Co. dogleg jack----American Knife Co. Plymouth CT sleeveboard jack----American Shear & Knife Co.(different company)sleeveboard jack.
#3 Lenox Cutlery Germany boy's knife----American Knife Co. Plymouth CTsleeveboard jack with folding brass ruler dated 1876----Remington sleeveboard jack----Fletcher Hardware Detroit Michigan sleeveboard jack----George Woodhead sleeveboard jack.
#4 Pruning knives by New York Knife Co.----John Copley----John Russell Green River Works----Queen Steel Titusville PA
Post by: Ray S on October 24, 2018, 11:32:32 PM
Ulster Knife Co.tuxedo----Empire Knife Co. Wharncliffe----Camillus 3 line(pre-WWI) jack----Humason & Beckley jack----Ulster large tuxedo.
Post by: NutSAK on October 25, 2018, 04:33:36 PM
Calf Roper
Good one David.
I'm curious about the second blade.
The Calf Roper is a typical stockman pattern, on a serpentine frame. So, the blades are clip main, sheepsfoot second, spey third.
Here is a Calf Roper "splayed". Sorry for the non-wood off topic! ;)
(https://farm9.staticflickr.com/8268/28990241326_ae6faf4233_h.jpg)
Post by: NutSAK on October 25, 2018, 04:36:13 PM
Post by: toolguy on October 25, 2018, 05:24:59 PM
A couple more:
Ulster Knife Co.tuxedo----Empire Knife Co. Wharncliffe----Camillus 3 line(pre-WWI) jack----Humason & Beckley jack----Ulster large tuxedo.
Ray you're a wealth of knowledge concerning pocket knives.
Thanks for sharing pictures,as well as the names of the makers.
Post by: toolguy on October 25, 2018, 05:27:54 PM
The Calf Roper is a typical stockman pattern, on a serpentine frame. So, the blades are clip main, sheepsfoot second, spey third.Calf RoperGood one David.
I'm curious about the second blade.
Here is a Calf Roper "splayed". Sorry for the non-wood off topic! ;)
(https://farm9.staticflickr.com/8268/28990241326_ae6faf4233_h.jpg)
Thanks for the info.
That must be a huge sheepsfoot blade on David's knife.LOL
Post by: SteveC on October 25, 2018, 05:56:39 PM
A couple more:
Ulster Knife Co.tuxedo----Empire Knife Co. Wharncliffe----Camillus 3 line(pre-WWI) jack----Humason & Beckley jack----Ulster large tuxedo.
Ray you're a wealth of knowledge concerning pocket knives.
Thanks for sharing pictures,as well as the names of the makers.
+1,000 :salute: :tu:
Post by: NutSAK on October 25, 2018, 05:57:23 PM
The Calf Roper is a typical stockman pattern, on a serpentine frame. So, the blades are clip main, sheepsfoot second, spey third.Calf RoperGood one David.
I'm curious about the second blade.
Here is a Calf Roper "splayed". Sorry for the non-wood off topic! ;)
(https://farm9.staticflickr.com/8268/28990241326_ae6faf4233_h.jpg)
Thanks for the info.
That must be a huge sheepsfoot blade on David's knife.LOL
Maybe it's just the picture? Here's a pic of mine folded, and it seems the same as David's to me. Stockman patterns like these usually don't have the sheepsfoot blade sunk way down in the frame, because the nail nick needs to be accessible with the other two blades folded.
(https://farm2.staticflickr.com/1844/29411096567_1d01acc746_h.jpg)
Post by: David on October 25, 2018, 06:14:43 PM
Post by: NutSAK on October 25, 2018, 06:22:11 PM
Post by: David on October 25, 2018, 06:31:40 PM
/\ Note how deep the kick is on the sheepsfoot blade to elevate it in the frame when folded.
Indeed. I've thought about filing the kick down some but it would probably cause the back spring to sink into the frame some. It has a nice flush fit now so I've left it alone.
Post by: NutSAK on October 25, 2018, 06:53:02 PM
Case, on the other hand is not. I've had to adjust the kicks on the sheepsfoot on both of my new Case stockmans. They weren't touched at the factory, and one of them had the tip of the blade proud of the frame.
Post by: toolguy on October 31, 2018, 06:40:13 PM
Post by: SteveC on October 31, 2018, 07:27:25 PM
Post by: Ray S on November 01, 2018, 03:01:29 AM
Four Gerber folders
A Gerber Model 1
A Gerber 400 I gave to my son for his first hunt.He came back with an 8 pointer and has never seen another deer since!
A Gerber MkII dagger.
Post by: Dean51 on November 01, 2018, 12:41:52 PM
This is another David Boye knife.This is his version of a Skinner.It's a small knife with a 3" blade but the handle has good length and is made of Cocobolo.It also has one of his well made sheaths.Nice looking and very useful as well. :like:
Post by: Dean51 on November 01, 2018, 12:42:41 PM
Mo' wood.
Four Gerber folders
A Gerber Model 1
A Gerber 400 I gave to my son for his first hunt.He came back with an 8 pointer and has never seen another deer since!
A Gerber MkII dagger.
Great lot of Gerbers. :salute: :like:
Post by: Dean51 on November 01, 2018, 12:49:15 PM
Queen City copper head in black wood and a Queen barlow in walnut
(https://i.imgur.com/EFnKGgz.jpg)
Post by: SteveC on November 01, 2018, 01:23:54 PM
Post by: Barry Rowland on November 06, 2018, 08:34:46 AM
Post by: SteveC on November 07, 2018, 04:20:38 PM
(https://i.imgur.com/fy0fMqYh.jpg)
Post by: Dean51 on November 07, 2018, 04:39:00 PM
Post by: Ray S on November 08, 2018, 12:47:27 AM
First is a group of all wood knives I have accumulated over the years.Have no idea who made them but they function as a folding knife should except they won't cut anything.
Second is a "penny" knife;so named because their inexpensive construction they sold for very little. They are usually a bit plainer than this one that is carved in the shape of a face and has small pieces of bone for eyes.
Third is an unmarked 3 blade knife with a cap lifter/can opener on the spine.The smaller curved blade only opens 90 degrees and is probably a grape harvesting blade.
Last is another folding knife with an unusually shaped tapered nail mark.
Post by: Dean51 on November 08, 2018, 02:22:44 AM
Post by: Poncho65 on November 08, 2018, 03:52:39 AM
Ray I sure like seeing your knives, it's like an education for me. :tu: :tu:
:iagree: :like:
Post by: Poncho65 on November 08, 2018, 03:53:03 AM
Post by: Ray S on November 08, 2018, 05:15:15 AM
Post by: Barry Rowland on November 09, 2018, 12:40:59 AM
Post by: David on November 09, 2018, 03:11:48 AM
It's still Wednesday somewhere, right.
Queen City copper head in black wood and a Queen barlow in walnut
(https://i.imgur.com/EFnKGgz.jpg)
Kind of late but that is a cool pic Dean! :like:
Post by: SteveC on November 14, 2018, 03:34:31 PM
GEC #78 in Cocobolo
(https://i.imgur.com/fbyWLWIh.jpg)
Post by: Ray S on November 14, 2018, 06:32:52 PM
#1 Floating fish knives with handles made of cork:Top to bottom:R.J.Richter......Japan.....KA-BAR.....Colonial.....Cressi
#2 A.G.Russell Sting 1977
#3 Bear MGC and Finnish puuko with layered birch handle.
#4 Cattaraugus floating fish knife with painted cork handle.
Post by: Ray S on November 14, 2018, 06:36:56 PM
#1 Custom by George Cousino of Onsted Michigan
#2 Unmarked knife with wood and plexiglas handle marked on sheath DFN
#3 Two fish scalers;one unmarked except for a fish logo and a PAL RH2
#4 Jimmie Lile custom(#333 of 500) for Duxback with osage orange handles
Post by: toolguy on November 14, 2018, 11:19:33 PM
Congrats.
Post by: Spartan19 on November 15, 2018, 12:40:16 AM
Post by: Ray S on November 15, 2018, 01:15:57 AM
Ray,that Lile is Shweeeeeeeeeet!
Congrats.
Thank you sir. It was one of my first custom knives that I acquired.Got it from a lawyer/client of mine for putting a custom pinstripe on his Mercedes.Came with the box,sheath,and COA. The sheath is unique in that it can be put on a belt on either right or left side and has a provision via a thong to hold it securely in the sheath but allow it to be quickly released.
Post by: toolguy on November 16, 2018, 05:18:55 PM
Thank you sir. It was one of my first custom knives that I acquired.Got it from a lawyer/client of mine for putting a custom pinstripe on his Mercedes.Came with the box,sheath,and COA. The sheath is unique in that it can be put on a belt on either right or left side and has a provision via a thong to hold it securely in the sheath but allow it to be quickly released.
That must have been some pinstripe job.
You're a lucky dog! LOL.
Post by: Ray S on November 16, 2018, 07:09:44 PM
Quote from: toolguy link=topic=77905.
That must have been some pinstripe job.
You're a lucky dog! LOL.
[/quote
That must have been some pinstripe job.
You're a lucky dog! LOL.
[/quote
The client was quite a character in his own right. He gave up his practice and bought a garage to restore vintage Bugattis which he still does. He has several of his own that he races in hill climbs up Mount Washington in New Hampshire.
Post by: SteveC on November 21, 2018, 04:20:46 PM
Sword brand Jack with I believe Walnut handles
(https://i.imgur.com/fFOkTzsh.jpg)
Post by: Barry Rowland on November 21, 2018, 04:46:11 PM
Post by: David on November 21, 2018, 10:27:42 PM
Post by: SteveC on November 21, 2018, 10:41:33 PM
Post by: Spartan19 on November 22, 2018, 01:26:49 AM
Post by: Poncho65 on November 22, 2018, 01:47:02 AM
Post by: Ray S on November 28, 2018, 05:06:26 PM
A large navaja pattern with etched blade and wood handles jigged to simulate bone.
A large folder made entirely of wood for a knife club.(background as always is 1 inch {25.4mm} squares).
A couple of Opinels.
Post by: SteveC on November 28, 2018, 09:05:11 PM
Post by: David on November 28, 2018, 10:14:43 PM
Post by: SteveC on November 28, 2018, 10:28:55 PM
Post by: Barry Rowland on November 30, 2018, 05:06:41 AM
Post by: Ray S on November 30, 2018, 06:03:18 AM
Ray, which model is that small Opinel?It is a #2. Here it is next to a USA 1 cent piece.
Post by: Barry Rowland on November 30, 2018, 10:10:51 AM
Post by: Ray S on December 06, 2018, 06:15:58 AM
#1 A John Russell curved stamp pruner.
#2 Russell straight stamp pruner.
#3 Atco Japan pruner.
#4 John Copley sheffield pruner
Post by: Ray S on December 06, 2018, 06:18:29 AM
#1 Ulster Dwight DeVine & sons pruner.
#2 Queen pruner
#3 KA-BAR pruner.
#Ontario Cutlery pruner
Night all
Post by: Barry Rowland on December 06, 2018, 04:17:34 PM
Post by: SteveC on December 06, 2018, 05:01:08 PM
I forgot WW this week ! :facepalm:
Post by: Ray S on December 12, 2018, 06:31:55 PM
#1 & 2:A Javanese keris.
#3 & 4: Another keris.
Post by: Ray S on December 12, 2018, 06:35:41 PM
#1 & 2: A Chinese short sword.
#3 & 4: A 17th century phia-kaetta.
Post by: Ray S on December 12, 2018, 06:40:21 PM
#1 & 2:A Phillippine barong with a carved dog's head handle.
#3 & 4:Another huge barong with wood handle inlaid with pieces of pearl shell.
Post by: SteveC on December 12, 2018, 06:59:08 PM
Post by: SteveC on December 12, 2018, 06:59:47 PM
(https://i.imgur.com/QSJakaxh.jpg)
Post by: Barry Rowland on December 12, 2018, 07:53:23 PM
Interesting pieces Ray :tu: as always I enjoy your collection :hatsoff:
Post by: SteveC on December 19, 2018, 03:20:16 PM
Post by: Barry Rowland on December 19, 2018, 03:29:12 PM
Post by: Aloha on December 19, 2018, 03:45:51 PM
Post by: Aloha on December 19, 2018, 03:46:28 PM
Carrying these two today for WW !
(https://i.imgur.com/QSJakaxh.jpg)
:dd:
Post by: Barry Rowland on December 19, 2018, 03:54:24 PM
Post by: SteveC on December 19, 2018, 06:05:28 PM
(https://i.imgur.com/dzCJvy7h.jpg)
Post by: Barry Rowland on December 19, 2018, 06:06:31 PM
Post by: SteveC on December 19, 2018, 11:55:34 PM
Post by: Dean51 on December 20, 2018, 12:16:45 AM
Happy WHW ! :woohoo:Got it covered today :tu:
Nice wood Barry, Aloha and Steve :like:
Trestle Pines Portage
Post by: SteveC on December 20, 2018, 01:12:02 AM
Post by: Barry Rowland on December 20, 2018, 06:42:25 AM
Post by: Ray S on December 22, 2018, 04:54:48 AM
#1 A pair of oyster shucking knives;one with a guard which I think might be a bit counter-productive for the task.
#2 Three fish knives by different makers;one marked PAL RH-2 the others unmarked.
#3 A Marbles model 81 fish knife circa 1906. This is the largest of the three models made. Bought it for 75 cents and turned down $300 for it. Still can't believe it is worth that much.
#4 Three more fish knives:from the top;a Case Tested XX model 500;a Lamson Goodnow;and a Kinfolks.
Post by: Ray S on December 22, 2018, 04:58:25 AM
Post by: Barry Rowland on December 22, 2018, 05:03:09 AM
Post by: SteveC on December 22, 2018, 05:56:06 AM
Post by: Barry Rowland on December 25, 2018, 03:56:06 PM
Post by: Spartan19 on December 25, 2018, 04:02:42 PM
Post by: David on December 25, 2018, 04:16:20 PM
Got the 2nd gen today
Good looking knife. :like: What is it a 2nd gen of?
Post by: Spartan19 on December 25, 2018, 04:19:09 PM
Post by: VICMAN on December 25, 2018, 05:59:11 PM
Got the 2nd gen today
Nice Myerchin Spartan! :like: :tu: :tu:
Post by: Spartan19 on December 26, 2018, 06:19:31 AM
Got the 2nd gen today
Nice Myerchin Spartan! :like: :tu: :tu:
Thanks! :hatsoff:
Post by: Poncho65 on December 26, 2018, 12:31:39 PM
Post by: SteveC on December 26, 2018, 02:17:01 PM
You guys got an early start ;)
Post by: Barry Rowland on December 26, 2018, 05:29:43 PM
Post by: David on December 26, 2018, 06:04:02 PM
Post by: Ray S on December 26, 2018, 07:55:22 PM
#1 Camillus 4 line Red Cross knife(WWI)-Frederich Hartkopf multiblade-Unmarked tool kit knife.
#2 Holley Knife Co.-Waterville Cutlery Co.-American Knife Co.- American Shear & Knife Co.
#3 Lenox Cutlery Co.-American Knife Co.-Remington -Fletcher Hardware -George Woodhead.
#4 Ulster Knife Co.- Empire Knife Co.-Camillus 3 line -Humason & Beckley -Ulster Knife Co.
Post by: SteveC on December 26, 2018, 08:14:17 PM
Camillus Sword Brand
(https://i.imgur.com/ugBPHL2h.jpg)
Post by: SteveC on January 09, 2019, 05:18:17 PM
American Jack
(https://i.imgur.com/uqFrZorh.jpg)
Post by: Barry Rowland on January 09, 2019, 05:51:19 PM
Post by: Ray S on January 09, 2019, 10:29:27 PM
An Olsen fixed blade hunter with file worked blade.
An old Olsen lockback folder.
A newer Olsen twin lockback made in Japan.
A modern lockback by Ozark Trail with an unusual pierced blade logo.
Post by: Dean51 on January 10, 2019, 01:53:12 AM
Post by: Dean51 on January 10, 2019, 01:56:06 AM
Post by: SteveC on January 10, 2019, 02:32:36 AM
Post by: Barry Rowland on January 10, 2019, 07:24:08 AM
Post by: Poncho65 on January 10, 2019, 12:39:13 PM
Post by: SteveC on January 16, 2019, 08:13:56 PM
(https://i.imgur.com/q2oR3Bfh.jpg)
Post by: Barry Rowland on January 16, 2019, 08:47:12 PM
Post by: SteveC on January 23, 2019, 06:18:07 PM
(https://i.imgur.com/EIrFyp9h.jpg)
Post by: Barry Rowland on January 23, 2019, 06:58:04 PM
Post by: SteveC on January 23, 2019, 08:02:50 PM
Post by: Spartan19 on January 23, 2019, 08:57:53 PM
Post by: SteveC on January 23, 2019, 08:59:16 PM
Post by: Rapidray on January 23, 2019, 09:41:42 PM
Post by: David on January 23, 2019, 10:20:47 PM
Post by: SteveC on January 23, 2019, 11:15:31 PM
Post by: Ray S on January 24, 2019, 12:28:59 AM
Post by: SteveC on January 24, 2019, 01:11:07 AM
Post by: Ray S on January 30, 2019, 06:16:50 AM
Post by: SteveC on January 30, 2019, 04:39:53 PM
Post by: SteveC on February 06, 2019, 05:26:47 PM
(https://i.imgur.com/n6gN4yvh.jpg)
Post by: Ray S on February 06, 2019, 07:00:28 PM
Post by: Spartan19 on February 06, 2019, 07:45:37 PM
Post by: Barry Rowland on February 06, 2019, 09:32:35 PM
Post by: SteveC on February 06, 2019, 09:37:05 PM
Post by: David on February 06, 2019, 10:29:47 PM
Post by: Barry Rowland on February 06, 2019, 10:31:48 PM
Post by: Ray S on February 07, 2019, 12:08:13 AM
:like:
Is that Spyderco wood handled?
Post by: SteveC on February 07, 2019, 12:16:44 AM
Calf Roper
Lovely ! :drool:
Post by: SteveC on February 13, 2019, 04:43:05 PM
(https://i.imgur.com/vKsR0F5h.jpg)
Post by: Barry Rowland on February 13, 2019, 04:55:31 PM
Post by: David on February 14, 2019, 12:16:17 AM
Beautiful grain!!
:iagree:
Post by: Ray S on February 14, 2019, 01:05:39 AM
Post by: SteveC on February 14, 2019, 01:08:06 AM
I always look forward to seeing what you are going to post for WW ! :hatsoff:
Post by: Barry Rowland on February 14, 2019, 01:12:29 AM
Post by: Ray S on February 14, 2019, 05:43:52 AM
I don't but that is a nice looking fixed blade ! :like: :tu:Thank you for the kind words Steve. That particular knife is one of the nicest factory knives I have ever seen;as nicely put together as any custom knife. The fit and finish are incredible.
I always look forward to seeing what you are going to post for WW ! :hatsoff:
Post by: SteveC on February 14, 2019, 05:47:35 AM
Post by: RF52 on February 14, 2019, 12:59:03 PM
My entry for WHW: A fixed blade by Erling Vangedal of Denmark. An extremely well made knife and sheath that was missing the sharpening steel for the sheath which has since been found. Anyone know anything about this company?Here is a link to their website
http://vangedalkniv.dk/
It's in danish, but you might be able to translate the page.
Sent fra min FRD-L09 via Tapatalk
Post by: Barry Rowland on February 14, 2019, 03:08:33 PM
Post by: Ray S on February 14, 2019, 05:32:58 PM
What kind of grind does it have Ray ?Steve:It is a flat grind that is done on both sides.
Post by: Ray S on February 14, 2019, 05:35:01 PM
Here is a link to their website
http://vangedalkniv.dk/
[/quote]
Thank you for that link! :cheers:
Post by: RF52 on February 14, 2019, 06:21:47 PM
Here is a link to their website
http://vangedalkniv.dk/
Thank you for that link! :cheers:
[/quote]No problem :cheers:
I think they are the most popular knife maker for scouts in Denmark, but someone that is Danish in this forum might be able to tell you more.
Sent fra min FRD-L09 via Tapatalk
Post by: Ray S on February 20, 2019, 07:27:39 PM
Post by: Barry Rowland on February 20, 2019, 08:28:51 PM
Post by: SteveC on February 20, 2019, 09:36:20 PM
Post by: Dean51 on February 21, 2019, 02:36:58 AM
Wood Handled Wednesday offering: Three fish scalers made by different companies.I haven't seen tools like that in a while. :tu: :tu:
Post by: SteveC on February 27, 2019, 04:56:21 PM
(https://i.imgur.com/GCwvNPnh.jpg)
Post by: Rapidray on February 27, 2019, 05:13:41 PM
Ebony ChurchillEbony...that is nice. Very nice! :like: :tu:
(https://i.imgur.com/GCwvNPnh.jpg)
Post by: Barry Rowland on February 27, 2019, 05:19:01 PM
Post by: SteveC on February 28, 2019, 12:03:39 AM
Post by: Ray S on February 28, 2019, 12:34:55 AM
Ulster tuxedo jack-Empire wharncliffe- Camillus 3 line(pre-WWI)-Humason & Beckley-Ulster. All have ebony handles
Post by: Barry Rowland on February 28, 2019, 12:37:37 AM
Post by: Rapidray on February 28, 2019, 12:38:47 AM
How about a 5 pack for Wood Handled Wednesday? From top to bottom::facepalm:
Ulster tuxedo jack-Empire wharncliffe- Camillus 3 line(pre-WWI)-Humason & Beckley-Ulster. All have ebony handles
Those ebony sure are nice! :like: :tu:
Post by: Dean51 on February 28, 2019, 12:56:58 AM
Post by: SteveC on March 01, 2019, 01:25:53 AM
How about a 5 pack for Wood Handled Wednesday? From top to bottom:
Ulster tuxedo jack-Empire wharncliffe- Camillus 3 line(pre-WWI)-Humason & Beckley-Ulster. All have ebony handles
Beauties ! :drool:
Post by: SteveC on March 06, 2019, 04:07:21 PM
(https://i.imgur.com/9tv9SDXh.jpg)
Post by: Barry Rowland on March 06, 2019, 04:11:30 PM
Post by: Dean51 on March 06, 2019, 07:45:14 PM
(https://i.imgur.com/beWN5Sk.jpg)
Post by: SteveC on March 06, 2019, 09:20:05 PM
Post by: Ray S on March 06, 2019, 09:39:58 PM
First up is an unmarked hand made piece with an unusual handle made of wood separated by a piece of colored plexiglass mounted on an angle between them.It came from Texas so the wood may be native to that area. The only marking was the initials D.D.N. carved into the sheath.
Second and third are pictures of a custom kitchen knife by J.I.Cottrell of Columbus Ohio with stabilized laminated wood handles.
Last is a James B.Lile(RIP) drop point hunter made for the outfitter Duxbak with osage orange handles.
Post by: Ray S on March 06, 2019, 09:44:40 PM
First up is a custom made knife with wood handles and sheath.
Next is a Track folder by Ithaca Gun Works
Next an unmarked knife with unusually shaped blade and handle.
Last is a custom drop point hunter by George Cousino who lives about 15 miles from me. This knife was bought by my son 7 daughter as a Christmas present for me one year.
Post by: SteveC on March 06, 2019, 09:45:05 PM
Post by: Ray S on March 06, 2019, 09:50:56 PM
Nice Ray, especially the last one ! :like: :tu:Thank you Steve.If you are referring to the last pic in my first post I swapped that for a pinstriping job on a friend of mine who was a lawyer at the time.He then quit practicing law and opened a garage restoring vintage Bugatti race cars.I have all the paper work and the original box for it.
The last pic in the second post was a gift from two of my children and means a lot to me. George Cousino makes some beautiful(and very expensive)knives and this one is a work of art.
Post by: SteveC on March 06, 2019, 09:58:10 PM
Post by: Dean51 on March 06, 2019, 10:41:17 PM
A couple more:
First up is a custom made knife with wood handles and sheath.
Next is a Track folder by Ithaca Gun Works
Next an unmarked knife with unusually shaped blade and handle.
Last is a custom drop point hunter by George Cousino who lives about 15 miles from me. This knife was bought by my son 7 daughter as a Christmas present for me one year.
:like: :like: That George Cousino drop point.
Post by: David on March 07, 2019, 12:02:38 AM
It's WHW ! :tu:
(https://i.imgur.com/9tv9SDXh.jpg)
Nice pic of your 78! :like:
Post by: David on March 07, 2019, 12:03:43 AM
It is WWH and I remembered. :D
(https://i.imgur.com/beWN5Sk.jpg)
Lovely pair of knives! :like:
Post by: David on March 07, 2019, 12:06:40 AM
Post by: SteveC on March 07, 2019, 12:09:37 AM
Post by: David on March 07, 2019, 01:23:47 AM
Post by: SteveC on March 07, 2019, 01:26:22 AM
Post by: Barry Rowland on March 07, 2019, 02:21:07 AM
Post by: Ray S on March 13, 2019, 07:37:25 PM
Post by: SteveC on March 13, 2019, 07:52:22 PM
Post by: Barry Rowland on March 13, 2019, 11:45:46 PM
Post by: SteveC on March 20, 2019, 08:18:02 PM
(https://i.imgur.com/278lLySh.jpg)
Post by: Barry Rowland on March 20, 2019, 09:25:10 PM
Post by: SteveC on March 20, 2019, 09:37:59 PM
Post by: Barry Rowland on March 20, 2019, 09:41:07 PM
Post by: David on March 20, 2019, 09:44:40 PM
Remington
(https://i.imgur.com/278lLySh.jpg)
Good pic of the Remington Jack! :like:
Post by: David on March 20, 2019, 09:47:56 PM
Post by: Barry Rowland on March 20, 2019, 10:08:19 PM
Post by: SteveC on March 20, 2019, 10:36:36 PM
Post by: Ray S on March 21, 2019, 02:43:14 AM
Post by: SteveC on March 21, 2019, 04:43:31 AM
Post by: Barry Rowland on March 21, 2019, 08:09:10 AM
Post by: Ray S on March 27, 2019, 04:47:43 AM
Post by: Barry Rowland on March 27, 2019, 04:44:21 PM
Post by: SteveC on March 27, 2019, 07:56:55 PM
Walnut Sword today !
(https://i.imgur.com/LmJvWJ1h.jpg)
Post by: Barry Rowland on March 28, 2019, 02:39:45 PM
Post by: Ray S on April 03, 2019, 06:14:41 PM
Post by: SteveC on April 03, 2019, 10:23:14 PM
Ebony Churchill
(https://i.imgur.com/farR0zIh.jpg)
Post by: Barry Rowland on April 04, 2019, 02:40:20 AM
Post by: David on April 04, 2019, 03:31:24 AM
:like:
Ebony Churchill
(https://i.imgur.com/farR0zIh.jpg)
Nice pic of the Churchill! :like:
Post by: SteveC on April 10, 2019, 04:35:14 PM
(https://i.imgur.com/SjoMgnqh.jpg)
Post by: Barry Rowland on April 10, 2019, 04:48:50 PM
Post by: Barry Rowland on April 10, 2019, 04:49:36 PM
Post by: Ray S on April 11, 2019, 12:54:41 AM
Post by: SteveC on April 11, 2019, 01:14:57 AM
Post by: SteveC on April 11, 2019, 01:15:15 AM
I can play this time!
Nice ! :tu:
Post by: SteveC on April 17, 2019, 03:49:56 PM
(https://i.imgur.com/bJMfbm1h.jpg)
Post by: Barry Rowland on April 17, 2019, 07:16:28 PM
Post by: Ray S on April 17, 2019, 11:08:56 PM
Post by: SteveC on April 18, 2019, 12:19:53 AM
Post by: SteveC on April 24, 2019, 03:09:12 PM
Post by: Barry Rowland on April 24, 2019, 03:54:38 PM
Post by: Ray S on April 24, 2019, 05:30:48 PM
Post by: SirVicaLot on April 24, 2019, 09:38:04 PM
Post by: SteveC on April 24, 2019, 09:45:39 PM
Post by: Barry Rowland on April 24, 2019, 09:45:58 PM
Post by: David on April 24, 2019, 10:02:02 PM
(https://i.imgur.com/tja2Aeo.jpg)
Good pic of that Remington! :like:
Post by: Ray S on May 01, 2019, 10:26:55 PM
Top one is a Kinfolks;the middle is a Lamson & Goodnow and the bottom is a Case Tested XX
Post by: Ray S on May 08, 2019, 04:58:32 PM
Post by: Barry Rowland on May 08, 2019, 05:17:51 PM
Post by: SteveC on May 08, 2019, 05:21:05 PM
Post by: SteveC on May 08, 2019, 05:21:33 PM
WHW fpr 5/8/19: A Camillus 3 line knife & spoon combination issued by the Red Cross to troops during WWI. Apparently very few were ever used so they usually show up in pristine condition;as this one did.
Very cool piece of history Ray !
Post by: SteveC on May 08, 2019, 05:21:57 PM
(https://i.imgur.com/vh1kGeAh.jpg)
Post by: Barry Rowland on May 08, 2019, 05:26:13 PM
Post by: SirVicaLot on May 09, 2019, 01:27:14 AM
Post by: David on May 09, 2019, 01:41:00 AM
WHW fpr 5/8/19: A Camillus 3 line knife & spoon combination issued by the Red Cross to troops during WWI. Apparently very few were ever used so they usually show up in pristine condition;as this one did.
Wow that one is in great shape! :like:
GEC #78 in Cocobolo
(https://i.imgur.com/vh1kGeAh.jpg)
Got some good Cocobola on the American Jack! :like:
Happy WHW folks :hatsoff:
That one is a dandy for sure! :like:
Post by: SteveC on May 15, 2019, 03:40:33 PM
Post by: Barry Rowland on May 15, 2019, 04:09:10 PM
Post by: Barry Rowland on May 15, 2019, 04:11:26 PM
Post by: Ray S on May 15, 2019, 06:02:15 PM
Called the Benchmark Rolox,it featured a unique opening mechanism whereby the top of the blade was lifted slightly and then was pushed open by pushing on the serrated top by the thumb until it locked open. To close,the lock bar on the bottom was pressed allowing the blade to rise up and be slid closed.
Two things were bad about this design: First it was very awkward to open and second;by putting the blade release on the bottom it invited triggering the mechanism by your small finger when putting a lot of pressure on the handle such as cutting through heavy material. This usually resulted in the blade sliding rapidly backward and grabbing the skin in between your thumb and index finger(don't ask HOW I know this!).
The knife was very well made and expensive(the wood handled model was over $60 back in the 1980's and the stag even more) and I don't think many were sold.I wound up with two of them(the other has Micarta handles).Strangely the other one has the false edge ground on the opposite side from the original one and has a shield.I am posting pics of both for comparison. Anyway that is the story.
Post by: SteveC on May 15, 2019, 06:18:41 PM
Post by: Spartan19 on May 16, 2019, 03:56:17 AM
Post by: Barry Rowland on May 16, 2019, 03:05:25 PM
Post by: SteveC on May 22, 2019, 04:05:45 PM
Same to you buddy!
+1 and sweet pic !
Post by: SteveC on May 22, 2019, 04:05:55 PM
Post by: Barry Rowland on May 22, 2019, 09:16:01 PM
Post by: David on May 22, 2019, 10:47:00 PM
(https://i.imgur.com/PWemFheh.jpg)
Remington sure made nice knives! :like:
Post by: David on May 22, 2019, 10:48:46 PM
Post by: SteveC on May 23, 2019, 01:16:33 AM
Post by: Ray S on May 23, 2019, 02:58:19 AM
Post by: SteveC on May 23, 2019, 03:27:51 AM
Post by: SirVicaLot on May 23, 2019, 06:11:54 AM
Post by: Barry Rowland on May 23, 2019, 04:45:48 PM
Post by: Ray S on May 29, 2019, 06:46:43 PM
Post by: Barry Rowland on May 29, 2019, 06:53:35 PM
Post by: Ray S on May 29, 2019, 07:25:03 PM
Cool knife Ray!Thank you sir. One of the things I love about accumulating knives is the virtually endless variety of them. Just when you think you have seen every type of knife ever produced,something else comes along.When researching this particular specimen I found that they come with a wooden bowl that is specifically shaped to the knife to facilitate chopping whatever(usually vegetables).I'll probably look for one of those even though it is unlikely I'll ever use it.
Post by: Ray S on June 05, 2019, 05:23:06 AM
Post by: SteveC on June 05, 2019, 05:57:55 AM
How's the eye doing ?
Post by: pfrsantos on June 05, 2019, 03:34:18 PM
Cool knife Ray!
+1
:tu: :tu:
Post by: pfrsantos on June 05, 2019, 03:35:26 PM
8) :( :D :P
(https://forum.multitool.org/index.php?action=dlattach;topic=50693.0;attach=436249;image)
(https://forum.multitool.org/index.php?action=dlattach;topic=50693.0;attach=436251;image)
Post by: Barry Rowland on June 05, 2019, 03:40:08 PM
Post by: SteveC on June 05, 2019, 03:42:03 PM
Don't remember seeing this thread before, but my current EDC allows me to be here: an artisanal Bandida, from the same maker of my Laggy. Been carrying it for a couple of days, but still haven't had a chance to use it.
8) :( :D :P
(https://forum.multitool.org/index.php?action=dlattach;topic=50693.0;attach=436249;image)
(https://forum.multitool.org/index.php?action=dlattach;topic=50693.0;attach=436251;image)
Glad you could join in :cheers:
That's an interesting handle shape
Post by: SteveC on June 05, 2019, 03:42:12 PM
Post by: Barry Rowland on June 05, 2019, 03:46:33 PM
Post by: pfrsantos on June 05, 2019, 05:02:04 PM
Glad you could join in :cheers:
That's an interesting handle shape
Glad to have joined, Steve!
It's a traditional portuguese/spanish design. It exists for a long time, but being hand made and in small quantities, it's not commonly known in other places.
8) 8)
Post by: Aloha on June 05, 2019, 05:14:26 PM
Post by: David on June 06, 2019, 03:20:46 AM
Post by: Barry Rowland on June 06, 2019, 03:21:46 AM
Post by: pfrsantos on June 06, 2019, 12:07:37 PM
I was also going to comment on the handle shape of your knife pfrsantos. Its sure is lovely.
Thanks! I just got to use it yesterday. Cutting a cantaloupe and some cheese (Queijo da Ilha, Açores) for diner.
Super sharp, took care of both without a problem.
:tu: :tu:
Post by: Ray S on June 12, 2019, 05:51:20 AM
Thought I would post a couple of views of this unusual carved,"penny" knife. The origins of this knife go back a LONG time and were so called because of their inexpensive construction allowed them to be sold very cheaply. Whether or not they actually cost a penny is open to discussion. Most were plain handled and rarely stamped with a maker's mark.
This particular one is stamped with what appears to be a hatchet or tomahawk and the handle is carved as that of a female being swallowed by a fish. The eyes are tiny black beads. Have no idea who made it but it is interesting.
Post by: SteveC on June 12, 2019, 03:37:12 PM
Post by: SteveC on June 12, 2019, 03:37:38 PM
Post by: Barry Rowland on June 12, 2019, 03:40:30 PM
Post by: RF52 on June 12, 2019, 04:03:10 PM
(https://uploads.tapatalk-cdn.com/20190612/67cd5b6aeedef6fd8c50bbb9e1a0a494.jpg)Sent fra min FRD-L09 via Tapatalk
Post by: Barry Rowland on June 12, 2019, 04:07:50 PM
Post by: RF52 on June 12, 2019, 05:00:27 PM
Sent fra min FRD-L09 via Tapatalk
Post by: SteveC on June 12, 2019, 05:11:42 PM
Post by: RF52 on June 12, 2019, 05:35:27 PM
Sent fra min FRD-L09 via Tapatalk
Post by: Ray S on June 19, 2019, 06:14:03 AM
A group of cork handled fish knives from various makers.Top to bottom:
Lunawerk Italy double edged dagger(one edge serrated).
Marked simply "Japan" with a handle painted to look like a bobber.Guess that makes it easy to see when you drop it overboard.
A KA-BAR with the blade hollowed out to lighten it.
A Colonial
A Cressi Italy.
Post by: SteveC on June 19, 2019, 03:44:32 PM
Post by: SteveC on June 19, 2019, 03:45:07 PM
(https://i.imgur.com/BRcovjPh.jpg)
Post by: Barry Rowland on June 19, 2019, 03:45:52 PM
Post by: Spartan19 on June 19, 2019, 07:10:46 PM
Post by: Max Stone on June 19, 2019, 10:47:42 PM
Post by: Ray S on June 20, 2019, 12:04:41 AM
The Bowie I got from a friend of mine who also tired of carrying it. Someone who owned it before him had attempted some engraving on the bolsters with(in my opinion anyway)less than satisfactory results. Didn't affect the function of the knife though.
Post by: Max Stone on June 20, 2019, 07:43:27 AM
Post by: SteveC on June 26, 2019, 03:01:22 PM
(https://i.imgur.com/9QjFDbDh.jpg)
Post by: Barry Rowland on June 26, 2019, 03:02:54 PM
Post by: David on June 26, 2019, 11:10:48 PM
Post by: Ray S on June 27, 2019, 12:32:46 AM
Post by: SteveC on June 27, 2019, 01:10:03 AM
Post by: Barry Rowland on June 27, 2019, 07:00:50 AM
Post by: SteveC on July 03, 2019, 02:02:22 PM
Post by: Ray S on July 03, 2019, 04:49:08 PM
This was Gerber's first foray into folding hunters and the came either with or without checkering.The ambidextrous grip allowed it to be held in either the right or left hand comfortably.For some reason they didn't sell well and were dropped from the line ifn favor of a more conventionally shaped folder.
For awhile they were very popular in the Japanese market and good examples fetched all kinds of crazy prices. I don't know if that is still the case today but I feel very fortunate to own a copy of one.
Post by: SteveC on July 03, 2019, 05:59:40 PM
Post by: SteveC on July 03, 2019, 06:00:11 PM
(https://i.imgur.com/ML6V5Adh.jpg)
Post by: LoopCutter on July 03, 2019, 07:49:30 PM
Sent from my iPhone using Tapatalk
Post by: David on July 04, 2019, 12:44:11 AM
These two for WHW !
(https://i.imgur.com/ML6V5Adh.jpg)
Couple good ones for WHW. :like:
I switched to my Wood Buck Stockman for today(https://uploads.tapatalk-cdn.com/20190703/a0c4b22b3d4bff2214a91c77dd20884d.jpg)
Sent from my iPhone using Tapatalk
Good Stockman LC. :like:
Post by: David on July 04, 2019, 12:45:46 AM
Post by: SteveC on July 04, 2019, 01:18:55 AM
I switched to my Wood Buck Stockman for today(https://uploads.tapatalk-cdn.com/20190703/a0c4b22b3d4bff2214a91c77dd20884d.jpg)
Sent from my iPhone using Tapatalk
Nice ! What kind of wood ?
Desert Ironwood and Walnut for this WHW.
Winning combo ! :tu:
Post by: LoopCutter on July 04, 2019, 01:42:49 AM
Nice ! What kind of wood ?I do not know.
RWS is the suffix on the box.
Here are some better pictures.
(https://uploads.tapatalk-cdn.com/20190703/8ac11d976458dda1cd91a4ccf85c9e0a.jpg)(https://uploads.tapatalk-cdn.com/20190703/bba844b4f9eda2fa78e556b8dba89bcc.jpg)
Sent from my iPhone using Tapatalk
Post by: SteveC on July 04, 2019, 01:57:45 AM
Post by: LoopCutter on July 04, 2019, 02:46:46 AM
Could be Rosewood :think:You are probably correct.
Neither model I have were listed on Buck’s web site when I picked these up a few years ago. Only know they are marked USA made.
Yes, Rosewood. This is a 301 model.
Sent from my iPhone using Tapatalk
Post by: Max Stone on July 05, 2019, 03:37:09 PM
Post by: LoopCutter on July 05, 2019, 08:22:06 PM
It’s a laminated wood, called Dymondwood.With Rosewood veneer.
Sent from my iPhone using Tapatalk
Post by: SteveC on July 10, 2019, 09:33:58 PM
Post by: David on July 11, 2019, 01:00:01 AM
Post by: SteveC on July 11, 2019, 01:02:39 AM
Calf Roper again this WHW
And why not :drool: :gimme:
Post by: David on July 11, 2019, 01:32:20 AM
(https://i.imgur.com/qY2LVUyh.jpg)
Couple verah nice ones! :like:
Post by: cody6268 on July 11, 2019, 04:20:19 AM
(https://i.imgur.com/PwdgrSU.jpg)
Post by: Ray S on July 17, 2019, 04:00:48 PM
Anyway to start things off I'll post a couple of Camillus knives. The first is a #1 pattern pruning knife. The second is a very old(circa 1915)easy open jack with ebony handles.The knife looked a little scruffy when I found it at an antique shop in Ashtabula Ohio many years ago and that is when I realized it had never been sharpened after it left the factory.There are a couple of nicks in the blades and I was tempted to work them out;but then I thought:that will destroy the history of the knife. I wondered how it had survived this long without seeing a stone.Wee'll never know but it makes for interesting speculation.
Post by: SteveC on July 17, 2019, 06:23:33 PM
Post by: SteveC on July 17, 2019, 06:24:17 PM
(https://i.imgur.com/AQG7VLVh.jpg)
Post by: LoopCutter on July 17, 2019, 08:10:08 PM
Found this lock back in a trade with it other Traditional folders, checked the sharpness and carried today to try it out. It did cut and stayed sharp. (https://uploads.tapatalk-cdn.com/20190717/86f1a38175206aad7ed158cad23477c4.jpg)(https://uploads.tapatalk-cdn.com/20190717/4aeb22ab977f86136cc45eca62f80b46.jpg)
Sent from my iPhone using Tapatalk
Post by: Max Stone on July 17, 2019, 09:09:03 PM
Post by: SteveC on July 17, 2019, 09:50:20 PM
Post by: Ray S on July 17, 2019, 10:16:13 PM
WAYNORTH CUTLERY Ebony LFNICE! Another one I have never heard of.Looks English to me.I have a nephew who lives in Buffalo;I'll see if he can find any info on the company.
Post by: Ray S on July 17, 2019, 10:17:24 PM
Besides my Buck 110s and 112s, I have few wooden scaled knives.Interesting two tone;I like it!
Found this lock back in a trade with it other Traditional folders, checked the sharpness and carried today to try it out. It did cut and stayed sharp.
Sent from my iPhone using Tapatalk
Post by: SteveC on July 17, 2019, 11:47:42 PM
NICE! Another one I have never heard of.Looks English to me.I have a nephew who lives in Buffalo;I'll see if he can find any info on the company.
Ray , here's some info
http://waynorthcutlery.net/
(https://www.allaboutpocketknives.com/catalog/image/catalog/1561137801_1840_1.jpg)
Post by: David on July 18, 2019, 01:20:23 AM
WAYNORTH CUTLERY Ebony LF
(https://i.imgur.com/AQG7VLVh.jpg)
Excellent! :like:
Besides my Buck 110s and 112s, I have few wooden scaled knives.
Found this lock back in a trade with it other Traditional folders, checked the sharpness and carried today to try it out. It did cut and stayed sharp. (https://uploads.tapatalk-cdn.com/20190717/86f1a38175206aad7ed158cad23477c4.jpg)(https://uploads.tapatalk-cdn.com/20190717/4aeb22ab977f86136cc45eca62f80b46.jpg)
Sent from my iPhone using Tapatalk
:tu: :like:
Post by: David on July 18, 2019, 01:23:08 AM
Some GEC wood.
Post by: SteveC on July 18, 2019, 02:41:51 AM
Post by: SteveC on July 24, 2019, 03:18:12 PM
(https://i.imgur.com/GNlXH0Lh.jpg)
Post by: Barry Rowland on July 24, 2019, 07:00:28 PM
Post by: Ray S on July 24, 2019, 09:48:20 PM
Post by: SteveC on July 24, 2019, 09:54:00 PM
Ray, the depth of your collection is amazing ! :hatsoff:
Post by: David on July 25, 2019, 01:50:55 AM
Post by: Barry Rowland on July 31, 2019, 03:26:40 PM
Post by: SteveC on July 31, 2019, 03:33:14 PM
Jigged Rosewood Camillus Radio Jack and a Cocobolo Rams Foot
(https://i.imgur.com/vlXQAWYh.jpg)
Post by: Barry Rowland on July 31, 2019, 03:43:23 PM
Post by: countrydirt on July 31, 2019, 05:06:48 PM
China Buck
Sent from my SM-N950U using Tapatalk
Post by: Ray S on July 31, 2019, 05:29:10 PM
Post by: David on August 01, 2019, 12:02:51 AM
Post by: SteveC on August 01, 2019, 12:22:12 AM
Post by: Greg Jones on August 01, 2019, 12:53:44 AM
Post by: SteveC on August 01, 2019, 01:52:17 AM
Post by: David on August 01, 2019, 02:00:34 AM
:like: Good to have you Greg :cheers:
:iagree:
Post by: Greg Jones on August 01, 2019, 02:11:59 AM
Post by: Barry Rowland on August 01, 2019, 02:51:33 AM
Post by: Ray S on August 07, 2019, 06:04:37 PM
Post by: SteveC on August 07, 2019, 06:13:27 PM
Post by: Barry Rowland on August 07, 2019, 10:32:22 PM
Post by: mikekoz on August 07, 2019, 10:36:01 PM
Post by: David on August 08, 2019, 04:11:26 AM
That is not a knife! That is a 4 blade machete!!! :like: :rofl:
:rofl:
Wood handled Wednesday for August 7th:A slightly large four blade congress pattern. Background is 1inch(25.4mm)squares.
Who made that knife Ray? Was it a company display knife?
Post by: Ray S on August 08, 2019, 04:19:10 AM
No;it is a recently made(within the last 20 or so years)Pak E. Stan special. I bought several different ones from e-Bay awhile back for under $15 apiece.
:rofl:
Who made that knife Ray? Was it a company display knife?
Post by: SteveC on August 14, 2019, 03:02:49 PM
(https://i.imgur.com/Q5e9cNAh.jpg)
Post by: Max Stone on August 14, 2019, 07:32:30 PM
Post by: SteveC on August 14, 2019, 08:01:51 PM
Post by: Ray S on August 14, 2019, 10:05:18 PM
According to the serial number this knife was made sometime in 1943 although I still haven't found out who the original owner was.The knife was given to me by an older gentleman for whom I had appraised a bunch of knives for him to sell.Imagine my surprise when I found out that one in the condition of mine was going for nearly a thousand dollars! I told him about it and all he said was,"Well now I know it is in good hands!" Needless to say I will never sell it.
Post by: Max Stone on August 14, 2019, 10:45:04 PM
Post by: SteveC on August 15, 2019, 01:19:02 AM
Post by: Rapidray on August 15, 2019, 02:25:54 AM
Post by: Ray S on August 21, 2019, 03:57:59 AM
Post by: SteveC on August 21, 2019, 05:33:17 AM
Post by: SteveC on August 21, 2019, 03:17:25 PM
Post by: Rapidray on August 21, 2019, 03:33:07 PM
(https://i.imgur.com/0hOnQ4zh.jpg):like: :cheers:
Post by: David on August 22, 2019, 12:34:07 AM
Wood Handled(Almost)Wednesday: Have a busy schedule tomorrow so I thought I wood(!)post this one now.Found at a local flea market over the weekend for the paltry sum of $15:a Boker 2020 GS with belt pouch still in the original box but missing the sharpening steel.Handles I believe are rosewood.
Good score Ray! :like:
Post by: David on August 22, 2019, 12:35:17 AM
(https://i.imgur.com/0hOnQ4zh.jpg)
The sunshine sure brings out the beautiful grain and color of the Cocobolo! :like:
Post by: David on August 22, 2019, 12:37:50 AM
Post by: SteveC on August 22, 2019, 01:20:08 AM
Post by: SteveC on August 28, 2019, 06:54:08 PM
Post by: Rapidray on August 28, 2019, 08:31:32 PM
(https://i.imgur.com/J0VzgQGh.jpg)Nice KUTMASTER :cheers:
Post by: Barry Rowland on August 28, 2019, 10:22:04 PM
Post by: WolfyW on September 03, 2019, 06:38:48 AM
Not the best photo, but it is my first wood handle Wednesday :cheers:
It would be un-Canadian of me to Not recognize a Grohmann, even when it's closed. Nice !
Post by: Rapidray on September 03, 2019, 02:48:35 PM
This Buck 110 with the new Ebony wood scales came in the mail to day. Gave it some oil and couple passes over the hone and into the pocket it went.Nice 110 :tu:
Post by: Ray S on September 04, 2019, 04:07:28 AM
Nice 110 :tu:Wood Handled Wednesday for 9/4/2019: A Blackie Collins design for Bench Mark Knives called the Rolox. Probably the worst designed knife I have ever seen which I will get to shortly for several reasons.
For those who are unfamiliar with the operation of this knife it goes as follows: To open the blade,you press down on the notched back part which elevates the point.By pushing forward on the notches the blade rides forward on rollers until it locks into the open position. To close,push down on the back lock(on the underside of the handle)which once again elevates the point of the blade.Grasping the blade,you slide it to the rear to the locked position.
And now for the design flaws.For one thing it is awkward at best to hold in one hand and operate the lock and blade with the other.The worst part however is that if you are cutting something heavy and exerting a lot of pressure on the handle the lock release falls right under your little finger which can trigger the lock and cause the blade to slide to the rear forcefully.What this usually accomplishes is to grab the skin in between your thumb and index finger rather painfully.DON'T ask how I know this!
Anyway as I am only allowed 4 pictures,the first post will show the operation of the knife and a second will show where your finger lays on the lock. Class over.
Post by: Ray S on September 04, 2019, 04:08:17 AM
Post by: Rapidray on September 04, 2019, 05:04:35 AM
And the follow up shot.Wow, that is no fun getting pinched! Sounds like a blood blister in the making.
Post by: SteveC on September 04, 2019, 03:20:39 PM
Post by: SteveC on September 04, 2019, 03:20:58 PM
(https://i.imgur.com/jXHRVJUh.jpg)
Post by: Rapidray on September 04, 2019, 04:45:57 PM
Walnut and EbonyVery nice duo! :like: :cheers:
(https://i.imgur.com/jXHRVJUh.jpg)
Post by: Max Stone on September 04, 2019, 10:41:36 PM
Post by: Rapidray on September 05, 2019, 12:57:17 AM
EvoWood S557 :salute:Nice wood! :like:
Post by: David on September 05, 2019, 02:34:42 AM
Walnut and Ebony\
(https://i.imgur.com/jXHRVJUh.jpg)
Good pic! :like:
Post by: SteveC on September 05, 2019, 02:50:53 AM
Post by: Max Stone on September 05, 2019, 07:33:06 AM
Nice wood! :like:Thanks Rapidray :hatsoff:
Post by: SteveC on September 05, 2019, 01:51:20 PM
EvoWood S557 :salute:
:like: :tu:
Post by: Max Stone on September 05, 2019, 03:44:03 PM
Post by: SteveC on September 11, 2019, 03:53:56 PM
(https://i.imgur.com/MIHEmuYh.jpg)
Post by: Rapidray on September 11, 2019, 04:15:24 PM
Some Cocobolo old and newNice wood material for sure! :like:
(https://i.imgur.com/MIHEmuYh.jpg)
Post by: Ray S on September 11, 2019, 10:08:21 PM
#1Four Connecticut made knives:Top to bottom:Holley Waterville American Knife Co. Plymouth-American Shear & Knife.All over a hundred years old.
#2 Lenox Germany American Knife Co. Plymouth Remington 1072 Fletcher Hardware Detroit Geo.Woodhead Sheffield.
#3 New York Knife Co. John Copley Sheffield Russell Queen City
#4 Ulster Empire Winsted CT Camillus 3 line(pre-WW1)Humason & Beckley(pre-WW1)Ulster.
Post by: Rapidray on September 11, 2019, 10:10:20 PM
Ebony Wednesday:Now those are Ebony! :2tu:
#1Four Connecticut made knives:Top to bottom:Holley Waterville American Knife Co. Plymouth-American Shear & Knife.All over a hundred years old.
#2 Lenox Germany American Knife Co. Plymouth Remington 1072 Fletcher Hardware Detroit Geo.Woodhead Sheffield.
#3 New York Knife Co. John Copley Sheffield Russell Queen City
#4 Ulster Empire Winsted CT Camillus 3 line(pre-WW1)Humason & Beckley(pre-WW1)Ulster.
Very nice! :cheers:
Post by: SteveC on September 12, 2019, 01:27:50 AM
Post by: comis on September 12, 2019, 05:52:30 AM
:ahhh so many sweet knives Ray :like: :tu:
:iagree:
Post by: Wspeed on September 18, 2019, 01:35:44 PM
(https://i.imgur.com/XdVCqOih.jpg)
Post by: SteveC on September 18, 2019, 01:37:24 PM
Post by: Rapidray on September 18, 2019, 01:48:40 PM
Happy wood handled Wednesday everyone :cheers:Nice :like:
(https://i.imgur.com/XdVCqOih.jpg)
Post by: Wspeed on September 18, 2019, 01:49:03 PM
Post by: VICMAN on September 18, 2019, 02:52:31 PM
Some Cocobolo old and new
Very nice Steve! :like: :tu: :tu:
Post by: SteveC on September 18, 2019, 04:29:02 PM
Snakewood
(https://i.imgur.com/4FeCSCWh.jpg)
(https://i.imgur.com/0xuy6Nph.jpg)
Post by: Wspeed on September 18, 2019, 05:00:15 PM
Post by: VICMAN on September 18, 2019, 06:58:24 PM
:hatsoff:
Snakewood
Good looking knife Steve! :like: :tu: :tu:
Post by: Aloha on September 18, 2019, 07:02:32 PM
:iagree:
:iagree:
:dd:
Post by: Aloha on September 18, 2019, 07:03:13 PM
Lovely Rosewood on that 301 ! :like:
:iagree: Looks great.
Post by: Aloha on September 18, 2019, 07:03:44 PM
:hatsoff:
Snakewood
(https://i.imgur.com/4FeCSCWh.jpg)
(https://i.imgur.com/0xuy6Nph.jpg)
Gorgeous.
Post by: Wspeed on September 18, 2019, 07:04:06 PM
:iagree: Looks great.Thanks Aloha :cheers: :tu:
Post by: Rapidray on September 18, 2019, 09:08:17 PM
:hatsoff::like: :tu:
Snakewood
(https://i.imgur.com/4FeCSCWh.jpg)
(https://i.imgur.com/0xuy6Nph.jpg)
Post by: Ray S on September 19, 2019, 03:40:44 AM
#1 is a custom hunter by George Cousino of Onsted Michigan. This was a gift one Christmas from my oldest son and daughter.
#2 is a handle on an unmarked dagger I got many years ago from a huge militaria collection.
#3 is another unknown handmade knife bought off e-Bay from Texas.
#4 is a custom drop point hunter by the late Jimmy Lile for Duxbak.Handle is osage orange.
Post by: Rapidray on September 19, 2019, 04:25:49 AM
Post by: Ray S on September 19, 2019, 05:57:10 AM
Nice ones for sure! Number 4 is really nice! :tu:Thank you sir. It is kind of special to me.What I really like about it is how Lile designed the sheath;it has a belt loop on either side so it can be worn right or left handed.There is a hole at the front top of the sheath that the lanyard goes through.It holds the handle in by wrapping around the handle and then passing through the hole.The loop rides on the top of the handle and to deploy the knife you flip the lanyard off and then pull the knife out.Kind of hard to explain but it really works well.
Post by: Wspeed on September 19, 2019, 02:01:45 PM
Post by: Rapidray on September 19, 2019, 05:02:23 PM
Thank you sir. It is kind of special to me.What I really like about it is how Lile designed the sheath;it has a belt loop on either side so it can be worn right or left handed.There is a hole at the front top of the sheath that the lanyard goes through.It holds the handle in by wrapping around the handle and then passing through the hole.The loop rides on the top of the handle and to deploy the knife you flip the lanyard off and then pull the knife out.Kind of hard to explain but it really works well.That is an interesting tie down! :like: :cheers:
Post by: SteveC on September 25, 2019, 04:03:23 PM
Post by: Rapidray on September 25, 2019, 04:05:58 PM
(https://i.imgur.com/i8EU4Juh.jpg)Nice wood! :like: :cheers:
Post by: chip on September 25, 2019, 05:27:02 PM
Post by: Rapidray on September 25, 2019, 05:52:41 PM
(https://i.imgur.com/06dfruO.jpg):tu:
Like that Rebar!
Post by: Wspeed on September 25, 2019, 05:56:21 PM
Post by: chip on September 25, 2019, 05:58:12 PM
:tu:Thanks, I really like it too. Being knifeless it makes a great edc here in the uk.
Like that Rebar!
Post by: chip on September 25, 2019, 05:58:41 PM
Nice knives Steve and chip :like: :tu:
Thanks speedy :tu:
Post by: Wspeed on September 25, 2019, 05:58:50 PM
(https://i.imgur.com/RQFqXDmh.jpg)
Post by: Rapidray on September 25, 2019, 07:15:36 PM
Post by: chip on September 25, 2019, 07:21:12 PM
:like: :tu: :tu::iagree: :like:
Post by: Wspeed on September 25, 2019, 07:30:47 PM
Post by: VICMAN on September 25, 2019, 08:10:15 PM
Nice knives Steve! :like: :tu: :tu:
Post by: VICMAN on September 25, 2019, 08:12:10 PM
The Buck Stockman 301 for WHW
Great carry for WHW Wspeed! :like: :tu: :tu:
Post by: LoopCutter on September 25, 2019, 09:42:49 PM
Sent from my iPhone using Tapatalk
Post by: Rapidray on September 25, 2019, 09:43:43 PM
Inspired by Speedy, put mine in my pocket this morning. (https://uploads.tapatalk-cdn.com/20190925/3910beed06320c73f874031d90653400.jpg)Nice :cheers:
Sent from my iPhone using Tapatalk
Post by: SteveC on September 25, 2019, 09:58:29 PM
(https://i.imgur.com/06dfruO.jpg)
Nice companion for your knifeless Rebar ! :like:
The Buck Stockman 301 for WHW
(https://i.imgur.com/RQFqXDmh.jpg)
Inspired by Speedy, put mine in my pocket this morning. (https://uploads.tapatalk-cdn.com/20190925/3910beed06320c73f874031d90653400.jpg)
Sent from my iPhone using Tapatalk
Nice Bucks you two ! :cheers:
Post by: chip on September 25, 2019, 10:10:32 PM
Post by: VICMAN on September 25, 2019, 10:13:01 PM
Inspired by Speedy, put mine in my pocket this morning.
Nice pic LoopCutter! :like: :tu: :tu:
Post by: Wspeed on September 25, 2019, 10:21:26 PM
Post by: Wspeed on September 25, 2019, 10:21:46 PM
Post by: David on September 25, 2019, 10:23:55 PM
Post by: Wspeed on September 25, 2019, 10:47:24 PM
Post by: SteveC on September 26, 2019, 12:24:42 AM
:woohoo: Its WHW! Good turn out.
:drool: :drool: :drool:
Post by: Sos24 on September 26, 2019, 03:41:17 AM
(https://uploads.tapatalk-cdn.com/20190926/9741d538fea8ca7200ae4bab43f1e64c.jpg)
Post by: Rapidray on September 26, 2019, 03:42:50 AM
:woohoo: Its WHW! Good turn out.Nice wood there! :like:
Post by: Rapidray on September 26, 2019, 03:43:38 AM
Utica Trapper for WHW.Nice wood trapper! :tu:
(https://uploads.tapatalk-cdn.com/20190926/9741d538fea8ca7200ae4bab43f1e64c.jpg)
Post by: Barry Rowland on September 26, 2019, 03:48:03 AM
Utica Trapper for WHW.
(https://uploads.tapatalk-cdn.com/20190926/9741d538fea8ca7200ae4bab43f1e64c.jpg)
Post by: Ray S on September 26, 2019, 03:52:12 AM
#1Browning USA single lock back.
#2 Beretta Made in Seki Japan.
#3 Kershaw .22 Cal.
#4 Explorer Big Paw.
Post by: Rapidray on September 26, 2019, 03:54:59 AM
Better late than never:
#1Browning USA single lock back.
#2 Beretta Made in Seki Japan.
#3 Kershaw .22 Cal.
#4 Explorer Big Paw.
Nice and cool :tu:
Post by: Barry Rowland on September 26, 2019, 01:16:15 PM
Post by: Wspeed on September 26, 2019, 01:28:42 PM
Post by: SteveC on September 27, 2019, 10:02:50 PM
Utica Trapper for WHW.
(https://uploads.tapatalk-cdn.com/20190926/9741d538fea8ca7200ae4bab43f1e64c.jpg)
:like: :tu:
Post by: SAK Guy on October 02, 2019, 05:49:56 PM
Post by: Rapidray on October 02, 2019, 06:25:40 PM
A (Camillus made) Remington 1989 Bullet Trapper in Cocobolo just in time for wooden Wed!Very nice, especially the Cocobolo wood! :like: :cheers:
Post by: SAK Guy on October 02, 2019, 06:27:47 PM
Very nice, especially the Cocobolo wood! :like: :cheers:
Thanks Ray! :cheers:
Post by: Wspeed on October 02, 2019, 06:38:49 PM
Post by: SAK Guy on October 02, 2019, 06:54:09 PM
Nice pic Sak Guy :like: :tu:
Thank you my friend! :cheers:
Post by: SteveC on October 02, 2019, 08:10:48 PM
A (Camillus made) Remington 1989 Bullet Trapper in Cocobolo just in time for wooden Wed!
Lovely ! :dd:
Post by: SteveC on October 02, 2019, 08:11:11 PM
(https://i.imgur.com/9uwdjakh.jpg)
Post by: SAK Guy on October 02, 2019, 08:26:10 PM
Lovely ! :dd:
:cheers: Thanks pal!!!
That Black Stallion is breathtaking! :drool:
Post by: Wspeed on October 02, 2019, 08:31:16 PM
Post by: Rapidray on October 02, 2019, 08:44:51 PM
Ebony Black Stallion #74Very nice Ebony wood :2tu:
(https://i.imgur.com/9uwdjakh.jpg)
Post by: SteveC on October 02, 2019, 08:51:36 PM
:cheers: Thanks pal!!!
That Black Stallion is breathtaking! :drool:
Thanks buddy ! :cheers:
Nice one Steve :like: :tu:
Very nice Ebony wood :2tu:
thanks fellas ! :cheers:
Post by: Ray S on October 03, 2019, 12:36:44 AM
Post by: Barry Rowland on October 03, 2019, 12:37:44 AM
Post by: SteveC on October 03, 2019, 01:06:37 AM
Post by: David on October 03, 2019, 01:51:23 AM
A (Camillus made) Remington 1989 Bullet Trapper in Cocobolo just in time for wooden Wed!
Verah nice! :like:
Ebony Black Stallion #74
(https://i.imgur.com/9uwdjakh.jpg)
:drool: and good pic! :like:
Post by: SteveC on October 03, 2019, 01:52:15 AM
Post by: Rapidray on October 03, 2019, 02:22:39 AM
WHW:A Crosman 932A made between 1982 and 1985.I like the pen blade being serrated. Don’t see that to often! :like: :cheers:
Post by: SAK Guy on October 03, 2019, 08:35:32 AM
Verah nice! :like:
:drool: and good pic! :like:
Thanks David!! :cheers:
Post by: Wspeed on October 03, 2019, 01:38:06 PM
Post by: Ray S on October 03, 2019, 04:23:50 PM
Nice wood handled knife Ray :like: :tu:Thank you sir.It is an extremely well made knife and very beefy.
Post by: Ray S on October 09, 2019, 01:53:37 AM
Found out that it was a secondary brand of Cattaraugus Cutlery. For those who do not know what a quill knife is;they were used to manufacture and sharpen ink pens made from feathers.They are usually characterized by having a short(in relation to the handle)thin blade and having the back spring wrap around the back of the knife and about 1/4 of the way forward in the blade well.
Post by: Rapidray on October 09, 2019, 04:42:22 AM
Post by: SteveC on October 09, 2019, 05:48:52 AM
Post by: Greg Jones on October 09, 2019, 12:22:29 PM
Post by: Wspeed on October 09, 2019, 01:16:14 PM
Post by: Rapidray on October 09, 2019, 04:20:36 PM
After a smart comment at work yesterday, I thought today would be a good day to participate in my first Wood Handle Wednesday and carry the 110 :cheers:Nice 110 :tu:
Post by: Rapidray on October 09, 2019, 04:22:38 PM
Post by: Dean51 on October 09, 2019, 05:31:46 PM
The Queen was my first venture into the so called super steels, I thought if I didn't like D2 at least I would have a nice sunday knife.
It turns out I liked the steel but the grind was .022 behind the edge which is fixed blade thickness.
Finally reground it last week to a more reusable .014 BTE, it now a very impressive slicy knife.
(https://i.imgur.com/6pTEuQl.jpg)
Post by: Rapidray on October 09, 2019, 05:33:34 PM
Post by: Wspeed on October 09, 2019, 05:34:45 PM
Post by: Rapidray on October 09, 2019, 05:35:40 PM
Post by: SteveC on October 09, 2019, 09:15:54 PM
After a smart comment at work yesterday, I thought today would be a good day to participate in my first Wood Handle Wednesday and carry the 110 :cheers:
:like:
Queen #2 and the Masserin plow for wood Wednesday.
The Queen was my first venture into the so called super steels, I thought if I didn't like D2 at least I would have a nice sunday knife.
It turns out I liked the steel but the grind was .022 behind the edge which is fixed blade thickness.
Finally reground it last week to a more reusable .014 BTE, it now a very impressive slicy knife.
(https://i.imgur.com/6pTEuQl.jpg)
Nicely done Dean ! :cheers:
Post by: SteveC on October 09, 2019, 09:16:13 PM
(https://i.imgur.com/rAEZg3Nh.jpg)
Post by: Wspeed on October 09, 2019, 09:16:54 PM
Post by: toolguy on October 09, 2019, 09:39:31 PM
This is a Puma 725 4 Star.I bought his about 25 years ago and as the pics indicate I still have its original green & yellow plastic box.
I liked the blade grind,the headless bolster construction and the fact I was offered this with a 50% discount.
I am not sure of the type of wood though.
Post by: Wspeed on October 09, 2019, 09:42:26 PM
Post by: toolguy on October 09, 2019, 09:47:54 PM
Very nice still looks brand new :like: :tu:
That's because I just finished buffing the blade and bolsters.LOL
I also haven't used it much except for some light cutting chores.
Post by: Wspeed on October 09, 2019, 10:33:27 PM
Post by: David on October 10, 2019, 12:30:47 AM
Post by: SteveC on October 10, 2019, 01:14:03 AM
Post by: SteveC on October 10, 2019, 01:15:09 AM
Very nice knives Greg,Ray,Dean and Steve.
This is a Puma 725 4 Star.I bought his about 25 years ago and as the pics indicate I still have its original green & yellow plastic box.
I liked the blade grind,the headless bolster construction and the fact I was offered this with a 50% discount.
I am not sure of the type of wood though.
Ebony or African Black wood I would guess :tu:
Post by: Sos24 on October 10, 2019, 02:21:17 AM
Post by: SteveC on October 10, 2019, 02:29:01 AM
Post by: Rapidray on October 10, 2019, 03:04:00 AM
Walnut and CocoboloNice wood on those two :cheers:
(https://i.imgur.com/rAEZg3Nh.jpg)
Post by: Rapidray on October 10, 2019, 03:05:54 AM
Very nice knives Greg,Ray,Dean and Steve.You must have a time machine! :rofl:
This is a Puma 725 4 Star.I bought his about 25 years ago and as the pics indicate I still have its original green & yellow plastic box.
I liked the blade grind,the headless bolster construction and the fact I was offered this with a 50% discount.
I am not sure of the type of wood though.
You have some of the nicest knives :cheers:
Post by: Rapidray on October 10, 2019, 03:06:45 AM
That's because I just finished buffing the blade and bolsters.LOL:rofl: :rofl:
I also haven't used it much except for some light cutting chores.
So much for the time machine :cheers:
Post by: Rapidray on October 10, 2019, 03:07:16 AM
One old and one new.Wow, that is neat! :like:
Post by: Rapidray on October 10, 2019, 03:07:38 AM
Post by: toolguy on October 10, 2019, 05:17:00 AM
You must have a time machine! :rofl:It never dawned on me to check the date code before I posted.I relied upon my memory.
You have some of the nicest knives :cheers:
When I did check the date code, I discovered this Puma was made in 1986.So it's 33 years old.Man does time fly.
Post by: PTRSAK on October 10, 2019, 06:12:14 AM
Post by: Rapidray on October 10, 2019, 06:28:51 AM
A 108mm GAK by B&H with spalted oak scales. just because...Nice oak scales
Post by: Wspeed on October 10, 2019, 01:25:06 PM
Post by: SteveC on October 10, 2019, 01:37:25 PM
Nice oak scales
:iagree:
Post by: Aloha on October 10, 2019, 03:57:51 PM
Walnut and Cocobolo
(https://i.imgur.com/rAEZg3Nh.jpg)
:drool: Flipping spectacular :like:
Post by: Aloha on October 10, 2019, 03:59:07 PM
Post by: Sos24 on October 10, 2019, 09:56:55 PM
@ Sos, that Barlow is lovely.Thanks, Aloha
Post by: SteveC on October 11, 2019, 03:49:44 AM
Post by: SteveC on October 16, 2019, 04:05:54 PM
Post by: chip on October 16, 2019, 04:15:11 PM
Post by: Wspeed on October 16, 2019, 04:15:24 PM
Post by: Rapidray on October 16, 2019, 08:27:19 PM
(https://i.imgur.com/PyuYsBKh.jpg)Nice duo there! :tu:
Post by: RF52 on October 16, 2019, 10:24:43 PM
(https://uploads.tapatalk-cdn.com/20191016/47e8034fd5a39c50ea7eacbed76f155b.jpg)Sent fra min FRD-L09 via Tapatalk
Post by: Wspeed on October 16, 2019, 11:24:55 PM
Post by: RF52 on October 16, 2019, 11:26:10 PM
Sent fra min FRD-L09 via Tapatalk
Post by: Wspeed on October 16, 2019, 11:26:36 PM
Post by: SteveC on October 16, 2019, 11:38:19 PM
Does a Crooked River in the dark count?
Sent fra min FRD-L09 via Tapatalk
Yes sir it does ! :like: :tu:
Post by: RF52 on October 16, 2019, 11:53:59 PM
Sent fra min FRD-L09 via Tapatalk
Post by: Ray S on October 16, 2019, 11:58:32 PM
#1 Alterbach Germany single blade with wood handles jigged to look like bone.
#2 OLCUT Union Cutlery Co.woodcraft pattern with wood handle jigged to look like stag.
#3 An Olsen OK large folder from Howard City Michigan.
#4 A modern liner lovk folder marked Ozark Trail with logo pierced into blade.
Post by: Sos24 on October 17, 2019, 01:50:02 AM
(https://uploads.tapatalk-cdn.com/20191016/e95a2120077be1fc0c662549f5018ed3.jpg)
Post by: SteveC on October 17, 2019, 01:50:58 AM
Post by: Sos24 on October 17, 2019, 01:51:13 AM
Thanks Steve.
Post by: Rapidray on October 17, 2019, 02:05:15 AM
Does a Crooked River in the dark count?Nice photo! :cheers:
Sent fra min FRD-L09 via Tapatalk
Post by: Rapidray on October 17, 2019, 02:06:15 AM
Post by: Wspeed on October 17, 2019, 01:43:09 PM
Post by: RF52 on October 17, 2019, 11:33:07 PM
Nice photo! :cheers::cheers: : salute:
Sent fra min FRD-L09 via Tapatalk
Post by: Ray S on October 23, 2019, 07:57:26 AM
A group of five floating fish knives with handles made of cork or some other light wood.
Post by: SAK Guy on October 23, 2019, 12:49:40 PM
Wood handled Wednesday for October 23rd.
A group of five floating fish knives with handles made of cork or some other light wood.
:drool: :drool: :drool: :drool: :cheers:
Post by: Wspeed on October 23, 2019, 01:13:52 PM
Post by: SAK Guy on October 23, 2019, 01:52:07 PM
GEC Northfield SFO 85 EO Bullet Jack in Cocobolo.
Post by: Rapidray on October 23, 2019, 01:54:17 PM
Wood handled Wednesday for October 23rd.Now that is an unusual collection - never would have thought of that one! :like: :cheers:
A group of five floating fish knives with handles made of cork or some other light wood.
Post by: Rapidray on October 23, 2019, 01:55:12 PM
Wooden Wed carry....Very nice - I need to get an EO :cheers:
GEC Northfield SFO 85 EO Bullet Jack in Cocobolo.
Post by: SteveC on October 23, 2019, 02:06:46 PM
Wooden Wed carry....
GEC Northfield SFO 85 EO Bullet Jack in Cocobolo.
Very nice ! :drool: :drool:
Post by: Rapidray on October 23, 2019, 02:19:09 PM
Post by: SAK Guy on October 23, 2019, 02:23:11 PM
Very nice - I need to get an EO :cheers:
Thanks Ray! They are great for arthritis and look dang good besides... :D
Post by: Rapidray on October 23, 2019, 02:29:39 PM
Thanks Ray! They are great for arthritis and look dang good besides... :DI was thinking of getting one just because it does look like a useful option. Some of these knives have some strong backs to them. I also like on the two bladed knives where they put the nail nicks on the opposite side which makes getting the smaller blade a lot easier!
Post by: SAK Guy on October 23, 2019, 02:30:45 PM
The Case today doing back up!
:like: :drool: Love those. My uncle had given me one from the series that had the sharks on them...lost it in the fire.
Post by: SAK Guy on October 23, 2019, 02:31:49 PM
I was thinking of getting one just because it does look like a useful option. Some of these knives have some strong backs to them. I also like on the two bladed knives where they put the nail nicks on the opposite side which makes getting the smaller blade a lot easier!
:cheers:
Post by: Wspeed on October 23, 2019, 03:18:24 PM
Post by: Wspeed on October 23, 2019, 04:35:36 PM
(https://i.imgur.com/nRCnnxd.jpg)
Post by: David on October 23, 2019, 04:52:07 PM
The Buck Stockman for WHW :cheers:
(https://i.imgur.com/nRCnnxd.jpg)
Nicee pic Speedy! :like:
Post by: Wspeed on October 23, 2019, 05:36:33 PM
Post by: Rapidray on October 23, 2019, 06:17:01 PM
:like: :drool: Love those. My uncle had given me one from the series that had the sharks on them...lost it in the fire.Fire! Oh no :facepalm:
Sorry to hear that. A family heirloom lost.
Post by: Rapidray on October 23, 2019, 06:17:40 PM
The Buck Stockman for WHW :cheers:Nice Stockman :tu:
(https://i.imgur.com/nRCnnxd.jpg)
Post by: SAK Guy on October 23, 2019, 06:27:49 PM
Nice knives for WHW Sak Guy and Rapidray :like: :tu:
Thx WS!!! :cheers:
Post by: SAK Guy on October 23, 2019, 06:28:28 PM
The Buck Stockman for WHW :cheers:
(https://i.imgur.com/nRCnnxd.jpg)
:drool: :like: :cheers:
Post by: Wspeed on October 23, 2019, 06:31:36 PM
Post by: SteveC on October 23, 2019, 09:03:28 PM
Post by: SteveC on October 23, 2019, 09:03:58 PM
(https://i.imgur.com/Kqj3sbih.jpg)
(https://i.imgur.com/NSWZe5hh.jpg)
Post by: Wspeed on October 23, 2019, 09:45:48 PM
Post by: SteveC on October 24, 2019, 12:08:55 AM
Post by: Rapidray on October 24, 2019, 04:14:41 AM
American Jack in CocoboloNice wood! :cheers:
(https://i.imgur.com/Kqj3sbih.jpg)
(https://i.imgur.com/NSWZe5hh.jpg)
Post by: SAK Guy on October 24, 2019, 05:13:29 AM
American Jack in Cocobolo
(https://i.imgur.com/Kqj3sbih.jpg)
(https://i.imgur.com/NSWZe5hh.jpg)
Really like that Jack buddy!!! :cheers:
Post by: SteveC on October 24, 2019, 05:50:32 AM
Post by: Ray S on October 30, 2019, 08:15:23 PM
An appropriate one for wood handled Wednesday:an ebony handled sleeveboard jack by George WOODHEAD Sheffield. Mostly known for his fine half horse half alligator handled bowies he also apparently made made pocket knives as well.I have two of his knives and have only seen a couple others.
Another ebony handles knife by Humason & Beckley of New Britain CT.
A wharncliffe seahorse jack by Empire Knife Co. Winsted CT.
A sleeveboard jack marked,"Fletcher Hardware Detroit Mich". Not sure who made this one.
Post by: SteveC on October 30, 2019, 08:18:08 PM
Post by: Wspeed on October 30, 2019, 08:18:31 PM
Post by: SteveC on October 30, 2019, 08:19:01 PM
(https://i.imgur.com/on2hVdHh.jpg)
Post by: Wspeed on October 30, 2019, 08:19:38 PM
Post by: Sos24 on October 30, 2019, 10:53:54 PM
For this WHW, it was a Utica Trapper
(https://uploads.tapatalk-cdn.com/20191030/e7da85392c3fcbe7c08d7638ae509b91.jpg)
Post by: Wspeed on October 30, 2019, 11:37:06 PM
Post by: SteveC on October 31, 2019, 12:21:54 AM
And thanks to you both ! :cheers:
Post by: Rapidray on October 31, 2019, 01:06:55 AM
WHW 30 October 2019Nice looking ebony wood :cheers:
An appropriate one for wood handled Wednesday:an ebony handled sleeveboard jack by George WOODHEAD Sheffield. Mostly known for his fine half horse half alligator handled bowies he also apparently made made pocket knives as well.I have two of his knives and have only seen a couple others.
Another ebony handles knife by Humason & Beckley of New Britain CT.
A wharncliffe seahorse jack by Empire Knife Co. Winsted CT.
A sleeveboard jack marked,"Fletcher Hardware Detroit Mich". Not sure who made this one.
Post by: Rapidray on October 31, 2019, 01:07:58 AM
Very nice knives, Ray and SteveNice :like:
For this WHW, it was a Utica Trapper
(https://uploads.tapatalk-cdn.com/20191030/e7da85392c3fcbe7c08d7638ae509b91.jpg)
Post by: Sos24 on October 31, 2019, 03:28:48 AM
Post by: Ray S on November 06, 2019, 07:26:27 AM
An A.Hallings small barrel knife with carved handle.
A Bergans-Slirling fixed blade.
An Erling Vandegal fixed blade.
An unmarked fancy puuko
Post by: Wspeed on November 06, 2019, 12:15:28 PM
Post by: Wspeed on November 06, 2019, 12:30:57 PM
(https://i.imgur.com/VmrPBOO.jpg)
Post by: Rapidray on November 06, 2019, 01:28:15 PM
Wood handled Wednesday 6 NovemberThat Puukko is very nice! :like: :cheers:
An A.Hallings small barrel knife with carved handle.
A Bergans-Slirling fixed blade.
An Erling Vandegal fixed blade.
An unmarked fancy puuko
Post by: Rapidray on November 06, 2019, 01:28:35 PM
Happy WHW everyone :cheers:Nice :like:
(https://i.imgur.com/VmrPBOO.jpg)
Post by: SteveC on November 06, 2019, 01:51:28 PM
Wood handled Wednesday 6 November
An A.Hallings small barrel knife with carved handle.
A Bergans-Slirling fixed blade.
An Erling Vandegal fixed blade.
An unmarked fancy puuko
Cool knives Ray ! :like:
Post by: SteveC on November 06, 2019, 01:51:51 PM
Happy WHW everyone :cheers:
(https://i.imgur.com/VmrPBOO.jpg)
Good pic of your Buck ! :cheers:
Post by: Wspeed on November 06, 2019, 02:52:56 PM
Post by: SteveC on November 06, 2019, 05:03:39 PM
(https://i.imgur.com/a2PJ8Mmh.jpg)
Post by: Wspeed on November 06, 2019, 05:04:12 PM
Post by: Rapidray on November 06, 2019, 07:40:16 PM
Bloodwood WhittlerTwo very nice looking and functioning knives! :cheers:
(https://i.imgur.com/a2PJ8Mmh.jpg)
Post by: VICMAN on November 06, 2019, 11:55:52 PM
Click on picture for best picture
Post by: Wspeed on November 06, 2019, 11:57:11 PM
especially the wooden Barlow :like:
Post by: VICMAN on November 06, 2019, 11:57:43 PM
Wood handled Wednesday 6 November
An unmarked fancy puuko
Cool puuko Ray! :like: :tu: :tu:
Post by: VICMAN on November 06, 2019, 11:58:37 PM
Happy WHW everyone :cheers:
Great pic Wspeed! :like: :tu: :tu:
Post by: VICMAN on November 06, 2019, 11:59:14 PM
Bloodwood Whittler
Cool Whittler Steve! :like: :tu: :tu:
Post by: Wspeed on November 07, 2019, 12:00:14 AM
Post by: VICMAN on November 07, 2019, 12:00:52 AM
Nice selection VICMAN
especially the wooden Barlow :like:
Thanks Wspeed!
A friend gave it to me years ago. :cheers:
Post by: Sos24 on November 07, 2019, 12:25:16 AM
Mine was a Utica Stockman
(https://uploads.tapatalk-cdn.com/20191106/f23837ec4b5fdb03768232843dc8e457.jpg)
Post by: David on November 07, 2019, 01:02:34 AM
Post by: David on November 07, 2019, 01:08:47 AM
Post by: Ray S on November 07, 2019, 01:09:50 AM
Post by: SteveC on November 07, 2019, 01:10:11 AM
When I got home from work I had a package from Steve. Inside was this nice Kutmaster rope knife. 8) Thank you pard! It'll be a special addition in my knife collection. Just in time for WHW! :D
You're welcome buddy ! :cheers:
Post by: SteveC on November 07, 2019, 01:11:01 AM
Here are 2 wood handled EKA's and a an all wood Barlow. :D
Click on picture for best picture
Cool Wood Barlow !
Nice selections today from everyone.
Mine was a Utica Stockman
(https://uploads.tapatalk-cdn.com/20191106/f23837ec4b5fdb03768232843dc8e457.jpg)
Nice Stockman ! :tu:
Post by: Rapidray on November 07, 2019, 02:11:54 AM
Here are 2 wood handled EKA's and a an all wood Barlow. :D:like: :cheers:
Click on picture for best picture
Post by: Rapidray on November 07, 2019, 02:12:58 AM
Nice selections today from everyone.:like: :cheers:
Mine was a Utica Stockman
Post by: Rapidray on November 07, 2019, 02:13:33 AM
When I got home from work I had a package from Steve. Inside was this nice Kutmaster rope knife. 8) Thank you pard! It'll be a special addition in my knife collection. Just in time for WHW! :DNice easy open knife :tu:
Post by: Wspeed on November 07, 2019, 01:27:40 PM
Post by: Ray S on November 13, 2019, 04:51:41 AM
Probably posted this one before but I had it out taking some better pictures of it so I figured to post it up.
Have no idea of it's origin;has etching on both sides of the blade and an intricately carved wood handle with a carved bone pommel.
Here are a few pics.(Saying on the side is,"Cum Deo et Manu"(with God & man?);a double headed bird logo over a rectangle with what looks like Arabic cyphers,and a lion behind a crowned shield with a heraldic cross and a glove(or skeletal hand)on the shield.
Any info would be greatly appreciated.
Post by: Ray S on November 13, 2019, 04:52:28 AM
Post by: Ray S on November 13, 2019, 04:53:04 AM
Post by: Wspeed on November 13, 2019, 12:55:47 PM
Post by: SteveC on November 13, 2019, 02:04:51 PM
Post by: SirVicaLot on November 13, 2019, 03:27:58 PM
Post by: Wspeed on November 13, 2019, 04:26:51 PM
(https://i.imgur.com/zHZFFaO.jpg)
Post by: Rapidray on November 13, 2019, 04:53:58 PM
Post by: Wspeed on November 13, 2019, 04:54:22 PM
Post by: SteveC on November 13, 2019, 05:44:02 PM
(https://i.imgur.com/x8STGFUh.jpg)
Post by: Wspeed on November 13, 2019, 05:59:43 PM
Post by: SteveC on November 13, 2019, 06:37:37 PM
The Buck Stockman for WHW
(https://i.imgur.com/zHZFFaO.jpg)
Nice pic !
Post by: Wspeed on November 13, 2019, 07:09:42 PM
Post by: Rapidray on November 14, 2019, 01:32:29 AM
Post by: Ray S on November 20, 2019, 06:40:17 AM
A pair of Javanese keris daggers with different types of wood handles.
Post by: Wspeed on November 20, 2019, 01:39:11 PM
Post by: Wspeed on November 20, 2019, 01:39:41 PM
(https://i.imgur.com/DlKLi8S.jpg)
Post by: SteveC on November 20, 2019, 01:53:23 PM
Post by: SteveC on November 20, 2019, 01:53:48 PM
20 November 2019 Wood handled Wednesday.
A pair of Javanese keris daggers with different types of wood handles.
Cool looking daggers ! :tu:
Post by: Wspeed on November 20, 2019, 01:55:57 PM
:like: :tu:Thanks Steve :cheers: :tu:
Post by: Rapidray on November 20, 2019, 02:48:28 PM
20 November 2019 Wood handled Wednesday.Now thats something you don’t see everyday! :cheers:
A pair of Javanese keris daggers with different types of wood handles.
Post by: Rapidray on November 20, 2019, 02:48:57 PM
Happy WHW everyone :cheers::tu:
(https://i.imgur.com/DlKLi8S.jpg)
Post by: Wspeed on November 20, 2019, 03:24:39 PM
Post by: SteveC on November 20, 2019, 07:40:18 PM
(https://i.imgur.com/4AMjHeih.jpg)
Post by: Wspeed on November 20, 2019, 09:14:29 PM
Post by: Rapidray on November 20, 2019, 10:36:31 PM
Happy WHW !Nice wood Wednesday carry :cheers:
(https://i.imgur.com/4AMjHeih.jpg)
Post by: Sos24 on November 21, 2019, 02:12:02 AM
Nice Jack, Steve.
A little Turquoise Maple for WHW
(https://uploads.tapatalk-cdn.com/20191121/4761bebf38e896e491266d8021c5ce88.jpg)
Post by: G-Dizzle on November 21, 2019, 02:51:41 AM
Post by: Rapidray on November 21, 2019, 03:34:56 AM
Nice Javanese daggers, Ray.Nice looking Barlow :cheers:
Nice Jack, Steve.
A little Turquoise Maple for WHW
(https://uploads.tapatalk-cdn.com/20191121/4761bebf38e896e491266d8021c5ce88.jpg)
Post by: Rapidray on November 21, 2019, 03:35:37 AM
(https://uploads.tapatalk-cdn.com/20191121/0acbb2e70eb32944c865d7935337dbff.plist)Nice looking duo... :like: :cheers:
Post by: Wspeed on November 21, 2019, 01:23:10 PM
Post by: VICMAN on November 21, 2019, 02:30:51 PM
Nice pic G-Dizzle! :like: :tu: :tu:
Here is the cousin to your mini-revolver:
Click on picture for best picture
Post by: VICMAN on November 21, 2019, 02:31:37 PM
A little Turquoise Maple for WHW
Good looking Barlow Sos24! :like: :tu: :tu:
Post by: G-Dizzle on November 21, 2019, 02:41:29 PM
Nice pic G-Dizzle! :like: :tu: :tu:Nice!!!
Here is the cousin to your mini-revolver:
Click on picture for best picture
Post by: VICMAN on November 21, 2019, 02:48:50 PM
Nice!!!
:cheers:
Post by: SteveC on November 21, 2019, 04:58:03 PM
Nice Javanese daggers, Ray.
Nice Jack, Steve.
A little Turquoise Maple for WHW
(https://uploads.tapatalk-cdn.com/20191121/4761bebf38e896e491266d8021c5ce88.jpg)
Nice to see that it's starting to grow on you a bit :like:
(https://uploads.tapatalk-cdn.com/20191121/0acbb2e70eb32944c865d7935337dbff.plist)
Nice pic G-Dizzle! :like: :tu: :tu:
Here is the cousin to your mini-revolver:
Click on picture for best picture
nice ones fellas ! :tu:
Post by: VICMAN on November 21, 2019, 08:36:16 PM
Nice to see that it's starting to grow on you a bit :like:
nice ones fellas ! :tu:
Thanks Steve! :cheers:
Post by: Sos24 on November 21, 2019, 09:30:38 PM
Thanks ray, wspeed, Steve and vicman.
Nice to see that it's starting to grow on you a bit :like:Yes, it is. I think the stoutness compared to others was throwing me a little, but it is starting to grow on me.
Post by: Rapidray on November 21, 2019, 09:38:40 PM
Nice pic G-Dizzle! :like: :tu: :tu:And another 22 magnum! Great matching wood! :cheers:
Here is the cousin to your mini-revolver:
Click on picture for best picture
Post by: Ray S on November 27, 2019, 07:27:15 AM
Post by: Sos24 on November 27, 2019, 07:51:35 AM
Wood handled Wednesday 27 Nov. A trio of oldies: Two folding hunters by Humason & Beckley and Wilbert Cutlery and a vintage pistol of Belgian manufacture.Not sure of the maker or the caliber)it is smaller than .22 caliber).
Cool combo.
Post by: Wspeed on November 27, 2019, 12:17:50 PM
Post by: Rapidray on November 27, 2019, 03:20:10 PM
Wood handled Wednesday 27 Nov. A trio of oldies: Two folding hunters by Humason & Beckley and Wilbert Cutlery and a vintage pistol of Belgian manufacture.Not sure of the maker or the caliber)it is smaller than .22 caliber).Nice is right! :like: :cheers:
Post by: Max Stone on November 27, 2019, 07:53:51 PM
Post by: Wspeed on November 27, 2019, 07:58:00 PM
Post by: Max Stone on November 27, 2019, 08:08:39 PM
Post by: Rapidray on November 27, 2019, 08:25:18 PM
Post by: Wspeed on November 27, 2019, 08:33:18 PM
Post by: Max Stone on November 27, 2019, 08:41:24 PM
Post by: Wspeed on November 27, 2019, 08:42:51 PM
Post by: SteveC on November 27, 2019, 09:14:42 PM
Post by: SteveC on November 27, 2019, 09:14:56 PM
Post by: Wspeed on November 27, 2019, 09:21:39 PM
Post by: Max Stone on November 27, 2019, 09:22:49 PM
Post by: SteveC on November 27, 2019, 09:32:18 PM
Post by: David on November 27, 2019, 11:52:47 PM
Nit sure what type of wood is on the Kutmaster. Probably Rose wood or Cocobolo.
Post by: Sos24 on November 28, 2019, 01:35:46 AM
Could not resist picking this up today with the Ranger Grip 55... had a choice of 4 so picked one with the most interesting wood pattern. Almost a burl. :tu:
Gorgeous SAK. You made a good choice with scale design. I’ve been thinking about getting some woods scales.
(https://i.imgur.com/PUP15TEh.jpg)
Nice Steve
.
:woohoo: WHW! Good carries Ray, Max and Steve! :like:
Nit sure what type of wood is on the Kutmaster. Probably Rose wood or Cocobolo.
Nice ones, David.
Post by: Rapidray on November 28, 2019, 02:19:14 AM
(https://i.imgur.com/PUP15TEh.jpg)Nice duo! :tu:
Post by: Rapidray on November 28, 2019, 02:19:42 AM
:woohoo: WHW! Good carries Ray, Max and Steve! :like:Great wood handle knives :tu:
Nit sure what type of wood is on the Kutmaster. Probably Rose wood or Cocobolo.
Post by: SteveC on November 28, 2019, 03:11:30 AM
Post by: Max Stone on November 28, 2019, 05:38:01 AM
Gorgeous SAK. You made a good choice with scale design. I’ve been thinking about getting some woods scales.Thank you 🆘 :hatsoff:
...
Post by: Ray S on November 28, 2019, 07:22:00 AM
Post by: Wspeed on November 28, 2019, 01:43:49 PM
Post by: VICMAN on November 28, 2019, 09:45:10 PM
Could not resist picking this up today with the Ranger Grip 55... had a choice of 4 so picked one with the most interesting wood pattern. Almost a burl. :tu:
Very nice looking handle Max! :like: :tu: :tu:
Post by: VICMAN on November 28, 2019, 09:45:56 PM
Nice duo and pic Steve! :like: :tu: :tu:
Post by: SteveC on November 29, 2019, 03:08:45 AM
Post by: Rapidray on November 29, 2019, 03:58:00 AM
A little late but I just finished this one up and thought I would post it. An old Imperial Kamp King that I got in a bag of parts knives.It was missing one shell handle so I removed the other and tossed it into my toolbox in the shop to use there. while fooling around out there tonight I came across some old scrap wood in a cigar box and decided they would make some good handles for it. Cut them out and CA glued them to the knife. A little sanding and some mahogany stain and I have a new shop knife.Not sure what the wood is but it is very soft.:tu:
Post by: Wspeed on December 04, 2019, 04:04:36 PM
(https://i.imgur.com/RGawMgi.jpg)
Post by: SteveC on December 04, 2019, 04:29:12 PM
Post by: SteveC on December 04, 2019, 04:29:31 PM
(https://i.imgur.com/d18mWHOh.jpg)
Post by: Ray S on December 04, 2019, 05:28:48 PM
Post by: Wspeed on December 04, 2019, 05:43:40 PM
Nice pics and knives for WHW Steve and Ray :like: :tu:
Post by: Rapidray on December 04, 2019, 08:57:42 PM
Happy WHW everyone :cheers:Nice :like:
(https://i.imgur.com/RGawMgi.jpg)
Post by: Wspeed on December 04, 2019, 09:22:18 PM
Post by: David on December 04, 2019, 10:20:47 PM
Case 11031 SHCC with Walnut covers.
Post by: SteveC on December 04, 2019, 10:48:28 PM
Post by: SteveC on December 04, 2019, 10:48:47 PM
Unmarked custom knife with wood handles.Bought this awhile back and it had never had an edge put on it.It took awhile to get an edge on it(very hard heat treat)but is scary sharp now. Although it may look uncomfortable,it is actually quite easy to use both upside down and right side up.The extension on the rear of the handle provides a nice small finger rest.
Cool knife Ray ! :tu:
Post by: Wspeed on December 04, 2019, 10:50:34 PM
Post by: Sos24 on December 05, 2019, 01:03:10 AM
Happy WHW everyone :cheers:
Buck looking good as always
Bloodwood Jack
Nice duo
:woohoo: Good knives and pics for WHW!
Case 11031 SHCC with Walnut covers.
Looks like that knife has some stories it could tell.
Post by: Sos24 on December 05, 2019, 01:08:11 AM
(https://uploads.tapatalk-cdn.com/20191205/60fefe40af8d649df7c636634a82f3d9.jpg)
The Brass pin marks the spot where it was made.
Post by: SteveC on December 05, 2019, 01:18:47 AM
Post by: Rapidray on December 05, 2019, 04:00:18 AM
:woohoo: Good knives and pics for WHW!Nice Case! :like:
Case 11031 SHCC with Walnut covers.
Post by: Rapidray on December 05, 2019, 04:00:54 AM
Utica Stockman for WHW:like:
(https://uploads.tapatalk-cdn.com/20191205/60fefe40af8d649df7c636634a82f3d9.jpg)
The Brass pin marks the spot where it was made.
Post by: cody6268 on December 05, 2019, 04:04:26 AM
(https://i.imgur.com/HPMHB7C.jpg)
What I like best is that it doesn't weigh a whole lot, and is pretty thin. And the wood grain.
(https://i.imgur.com/GFdovsQ.jpg)
Post by: SteveC on December 05, 2019, 05:40:56 AM
Post by: Wspeed on December 05, 2019, 12:43:05 PM
Post by: Sos24 on December 05, 2019, 08:13:11 PM
Post by: Wspeed on December 11, 2019, 03:50:03 PM
(https://i.imgur.com/1mAarbZ.jpg)
Post by: Rapidray on December 11, 2019, 04:57:16 PM
Post by: Wspeed on December 11, 2019, 05:26:52 PM
Post by: Rapidray on December 11, 2019, 05:30:58 PM
Post by: Wspeed on December 11, 2019, 06:09:50 PM
Post by: SteveC on December 11, 2019, 06:26:26 PM
Cocobolo and Bloodwood
(https://i.imgur.com/heG1zo3h.jpg)
Post by: Wspeed on December 11, 2019, 07:22:35 PM
Post by: Rapidray on December 11, 2019, 09:06:41 PM
Post by: Ray S on December 11, 2019, 09:32:09 PM
Post by: Wspeed on December 11, 2019, 09:39:20 PM
Post by: SteveC on December 11, 2019, 10:32:12 PM
Post by: Rapidray on December 11, 2019, 10:33:58 PM
WHW 12-11-2019 A World War 2 era telephone linesman's set(TL-14A) with a 4 line Camillus TL-29 knife.Oh yeah! There you go! :2tu: :cheers:
Post by: Sos24 on December 12, 2019, 01:04:23 AM
Mine was a Utica Trapper
(https://uploads.tapatalk-cdn.com/20191212/540364015c7bba5850778f65ad27b4ac.jpg)
Post by: SteveC on December 12, 2019, 01:05:49 AM
Post by: Rapidray on December 12, 2019, 01:08:07 AM
Post by: Wspeed on December 12, 2019, 01:30:18 PM
Post by: Ray S on December 18, 2019, 06:47:53 AM
Post by: Ray S on December 18, 2019, 06:49:20 AM
Post by: Sos24 on December 18, 2019, 07:56:49 AM
Post by: Wspeed on December 18, 2019, 01:42:59 PM
Post by: SteveC on December 18, 2019, 02:07:02 PM
Post by: Wspeed on December 18, 2019, 03:57:24 PM
(https://i.imgur.com/7Jefch9.jpg)
Post by: Rapidray on December 18, 2019, 04:17:26 PM
Post by: Wspeed on December 18, 2019, 04:22:59 PM
Post by: Rapidray on December 18, 2019, 04:36:02 PM
Post by: Wspeed on December 18, 2019, 06:09:27 PM
Post by: Sos24 on December 18, 2019, 07:24:39 PM
Mine was the SAK Compact
(https://uploads.tapatalk-cdn.com/20191218/29c2a449535b0e49a9661dbb13339fc1.jpg)
Post by: SirVicaLot on December 18, 2019, 07:35:06 PM
Post by: SteveC on December 18, 2019, 07:40:32 PM
Post by: SteveC on December 18, 2019, 07:41:05 PM
(https://i.imgur.com/yFDOAH2h.jpg)
Post by: Sos24 on December 18, 2019, 07:43:37 PM
I like the walnut and the Western, Steve.
Post by: Wspeed on December 18, 2019, 07:48:40 PM
Post by: SirVicaLot on December 18, 2019, 09:39:30 PM
(http://www.justbenphotography.com/img/s/v-10/p3762101444-4.jpg)
Post by: Wspeed on December 18, 2019, 10:13:20 PM
Post by: SteveC on December 18, 2019, 11:33:10 PM
What kind of wood is that ?
Post by: Rapidray on December 19, 2019, 12:12:39 AM
Nice one, wspeed and RapidRayThat is just so good looking :drool:
Mine was the SAK Compact
(https://uploads.tapatalk-cdn.com/20191218/29c2a449535b0e49a9661dbb13339fc1.jpg)
Post by: Rapidray on December 19, 2019, 12:13:16 AM
Walnut :)Oh so nice! :like: :cheers:
(https://i.imgur.com/yFDOAH2h.jpg)
Post by: Rapidray on December 19, 2019, 12:13:42 AM
My diy custom folder for whw :cheers::like: :cheers:
(http://www.justbenphotography.com/img/s/v-10/p3762101444-4.jpg)
Post by: SirVicaLot on December 19, 2019, 04:18:01 AM
:iagree: :tu:
What kind of wood is that ?
It is zebra wood. One of my favorites. Love the patterns and the distinction between light and dark areas :tu:
Post by: SteveC on December 19, 2019, 05:54:31 AM
Post by: Sos24 on December 19, 2019, 06:02:44 AM
Post by: Sos24 on December 19, 2019, 06:03:27 AM
My diy custom folder for whw :cheers:
(http://www.justbenphotography.com/img/s/v-10/p3762101444-4.jpg)
Beautifully done knife.
Post by: SirVicaLot on December 19, 2019, 03:28:49 PM
Post by: ElevenBlade on December 19, 2019, 04:07:57 PM
My diy custom folder for whw :cheers:
(http://www.justbenphotography.com/img/s/v-10/p3762101444-4.jpg)
Nice! - I used to have one that had the same handle shape, made of wood. I can't remember the brand... I thought it was Boker, but I would never have been able to afford that.
Post by: SteveC on January 01, 2020, 08:14:25 PM
A great way to start the New Year off ! :cheers:
(https://i.imgur.com/7q0fXYAh.jpg)
Post by: Sos24 on January 01, 2020, 08:40:59 PM
Post by: Rapidray on January 01, 2020, 08:48:54 PM
Happy WW ! :woohoo:It is nice! :like:
A great way to start the New Year off ! :cheers:
(https://i.imgur.com/7q0fXYAh.jpg)
Post by: Rapidray on January 01, 2020, 08:50:32 PM
You can tell that Buck has some stories to tell.:like::iagree: Having a knife that long, there has to be a couple of good ones! :cheers:
Post by: Wspeed on January 01, 2020, 09:47:12 PM
Post by: toolguy on January 01, 2020, 10:08:12 PM
Happy WW ! :woohoo:
A great way to start the New Year off ! :cheers:
(https://i.imgur.com/7q0fXYAh.jpg)
Gnarly knife,gnarly piece of lumber and great picture,congrats Steve.
I'm sure Steve knows the rarity of his Ranger.
For those that may not understand,I'll provide a simple explanation.
The "three dot" Buck knives were made for one year.It's also the first year for the finger groove 112.Hoooraah!
Post by: toolguy on January 01, 2020, 10:31:39 PM
When I spotted this one it was labeled as used and it looked it but the blades looked as if they still had the factory edge.Unfortunately the seller was asking $75.00.When I searched his history he apparently offers his knives at a very high price with a "make offer" option.
Ah ha,my opening! So I made an offer of $40.00.He made a counter offer and after several counters I paid $50.00 including shipping.Since many that I've viewed were offered at $80.00- $115.00,I felt comfortable with this price.
Now to the real crux of my reason for trying to buy this "Rattlesnake".This was made using oak scales.It's the only one that I've seen.
Well after some time removing numerous scratches and factory tool marks,it's ready to be placed amongst my collection.
Post by: Rapidray on January 01, 2020, 10:51:40 PM
Nice score by the way! :tu:
Post by: Sos24 on January 01, 2020, 11:11:12 PM
I always make an offer on used items, I figure the worse that can happen is they say no. That is how I got a nice Girl Scout knife from the 60s.
Post by: Wspeed on January 01, 2020, 11:38:15 PM
Post by: Sos24 on January 01, 2020, 11:47:46 PM
Queen #69 Walnut.
(https://i.imgur.com/d6ykyvT.jpg)
Love the wood grain and color on that Barlow.
Here is one that I used to carry a lot because of it's light weight. Never could get into Buck 110's because they felt too handle heavy for me and my hand would cramp with heavy use. This is a Gerber Model 1 (also called the Gunstock model).Very light in weight and very sturdy. I stopped carrying it when I found out the ridiculous prices they were selling for;especially in Japan.
Very unique handle
Post by: toolguy on January 01, 2020, 11:56:00 PM
I am the same way...I always make an offer and go from there. :cheers:Thanks Ray.
Nice score by the way! :tu:
Very cool, toolguy.Thank you. That's how I figure it as well.
.I always make an offer on used items, I figure the worse that can happen is they say no. That is how I got a nice Girl Scout knife from the 60s.
Nice one toolguy :like: :tu:Thanks W.
Post by: Ray S on January 02, 2020, 12:55:16 AM
Post by: Rapidray on January 02, 2020, 02:08:31 AM
Post by: Wspeed on January 02, 2020, 01:59:22 PM
Post by: SteveC on January 02, 2020, 02:19:04 PM
Post by: SteveC on January 02, 2020, 02:20:17 PM
Members who are familiar with Case knives may know about the series titled "the Rattlesnake".I've seen many over the past 18 months and all of them have been done on bone.Most of them also come with a very cool metal tin.Unfortunately they also come with a hefty price tag.
When I spotted this one it was labeled as used and it looked it but the blades looked as if they still had the factory edge.Unfortunately the seller was asking $75.00.When I searched his history he apparently offers his knives at a very high price with a "make offer" option.
Ah ha,my opening! So I made an offer of $40.00.He made a counter offer and after several counters I paid $50.00 including shipping.Since many that I've viewed were offered at $80.00- $115.00,I felt comfortable with this price.
Now to the real crux of my reason for trying to buy this "Rattlesnake".This was made using oak scales.It's the only one that I've seen.
Well after some time removing numerous scratches and factory tool marks,it's ready to be placed amongst my collection.
Very cool handles ! :like:
Post by: SteveC on January 02, 2020, 05:09:58 PM
Gnarly knife,gnarly piece of lumber and great picture,congrats Steve.
I'm sure Steve knows the rarity of his Ranger.
For those that may not understand,I'll provide a simple explanation.
The "three dot" Buck knives were made for one year.It's also the first year for the finger groove 112.Hoooraah!
Thanks for that info, I had know idea that it was rare. Got it for my Birthday in 1981 :tu:
Post by: Rapidray on January 02, 2020, 06:06:43 PM
Post by: Ray S on January 08, 2020, 05:41:38 AM
A 17th century phia-kaetta with handles made of some type of wood. engraving everywhere.
Post by: mikekoz on January 08, 2020, 10:33:38 AM
WHW post:
A 17th century phia-kaetta with handles made of some type of wood. engraving everywhere.
Wow! Talk about a knife with stories to tell! That one could write a novel, and then get made into a TV series on the History Channel!!! :tu: :cheers: :D
Post by: Wspeed on January 08, 2020, 02:27:39 PM
Post by: Rapidray on January 08, 2020, 03:32:39 PM
:cheers:
Post by: SteveC on January 08, 2020, 06:07:44 PM
Post by: Rapidray on January 08, 2020, 09:22:01 PM
(https://i.imgur.com/CwaZF0Eh.jpg)Oh yeah :like: :cheers:
Post by: Wspeed on January 08, 2020, 09:47:04 PM
Post by: toolguy on January 08, 2020, 10:37:52 PM
Post by: David on January 09, 2020, 12:22:43 AM
(https://i.imgur.com/CwaZF0Eh.jpg)
Sweet Remington Jack! :like:
Post by: David on January 09, 2020, 12:24:46 AM
Post by: Rapidray on January 09, 2020, 01:29:37 AM
Oak and Walnut for WHW.Two nice looking knives :like: :cheers:
Post by: toolguy on January 09, 2020, 05:10:46 AM
Post by: Rapidray on January 09, 2020, 05:37:26 AM
Don’t know the correct name for it :facepalm:
Post by: toolguy on January 09, 2020, 06:28:39 AM
Is that made from different pieces of wood? :dunno:
Don’t know the correct name for it :facepalm:
I had to look at it through a magnifying lens.It's made from dozens of very small pieces of wood intricately fitted to create this scene.
I don't know the history of this knife but it appears to a labor intensive design.
Post by: Wspeed on January 09, 2020, 01:52:55 PM
Post by: SteveC on January 09, 2020, 02:05:38 PM
Oak and Walnut for WHW.
I :like: those two very much ! :tu:
Post by: SteveC on January 09, 2020, 02:06:01 PM
This an unusual Case Trapper titled the "Eagle Dancer".
Lovely work !
Post by: Rapidray on January 09, 2020, 03:52:39 PM
I had to look at it through a magnifying lens.It's made from dozens of very small pieces of wood intricately fitted to create this scene.Thats what I was thinking! I have always liked that type of woodworking. A skill I do not have - thanks for the information :hatsoff:
I don't know the history of this knife but it appears to a labor intensive design.
Post by: Ray S on January 09, 2020, 10:02:04 PM
This an unusual Case Trapper titled the "Eagle Dancer".
That is one beautiful knife! That inlay work is very labor intensive. I had a friend of mine(sadly deceased now)who was a custom guitar maker by trade and one of his specialties was inlaying wood and mother of pearl designs into guitars.I wish I had a picture of a guitar neck he did one time;it was all done using mother of pearl,abalone,and ivory.An image of a dragon going the full length of the fingerboard.Took him two months to finish.
Post by: Rapidray on January 10, 2020, 12:16:09 AM
That is one beautiful knife! That inlay work is very labor intensive. I had a friend of mine(sadly deceased now)who was a custom guitar maker by trade and one of his specialties was inlaying wood and mother of pearl designs into guitars.I wish I had a picture of a guitar neck he did one time;it was all done using mother of pearl,abalone,and ivory.An image of a dragon going the full length of the fingerboard.Took him two months to finish.:sa: two months - that had to have looked fantastic
Post by: SteveC on January 10, 2020, 02:09:05 PM
Is that made from different pieces of wood? :dunno:
Don’t know the correct name for it :facepalm:
It's called " marquetry"
:cheers:
Post by: Rapidray on January 10, 2020, 03:25:44 PM
Thank you sir! It is a beautiful art form :dd:
It's called " marquetry"
:cheers:
:hatsoff:
Post by: Max Stone on January 15, 2020, 10:57:15 AM
Even though this is a 5-layer SAK, it’s quite compact (84mm length) and carries well in the pocket on a lanyard.
Post by: Wspeed on January 15, 2020, 02:05:16 PM
Post by: SteveC on January 15, 2020, 02:05:47 PM
Post by: Rapidray on January 15, 2020, 02:40:19 PM
EvoWood S557. :tu:Nice :like: :cheers:
Even though this is a 5-layer SAK, it’s quite compact (84mm length) and carries well in the pocket on a lanyard.
Post by: Wspeed on January 15, 2020, 04:28:44 PM
(https://i.imgur.com/Ji9ddZ7.jpg)
Post by: SteveC on January 15, 2020, 04:43:10 PM
Post by: SteveC on January 15, 2020, 04:43:37 PM
(https://i.imgur.com/znvENZyh.jpg)
Post by: Wspeed on January 15, 2020, 04:44:14 PM
Post by: David on January 15, 2020, 06:03:17 PM
Happy Wood Handled Wednesday everyone :cheers:
(https://i.imgur.com/Ji9ddZ7.jpg)
Good pic of your Buck Speedy! :like:
Ebony Churchill
(https://i.imgur.com/znvENZyh.jpg)
Sure is a sweet one!
Post by: SteveC on January 15, 2020, 06:08:39 PM
Post by: Rapidray on January 15, 2020, 06:18:24 PM
Happy Wood Handled Wednesday everyone :cheers:Nice :like:
(https://i.imgur.com/Ji9ddZ7.jpg)
Post by: Rapidray on January 15, 2020, 06:19:15 PM
Ebony ChurchillNice Churchill and who doesn’t like ebony! :drool:
(https://i.imgur.com/znvENZyh.jpg)
Post by: Max Stone on January 15, 2020, 06:31:43 PM
Ebony ChurchillThanks Steve, Wim, RR :hatsoff:
(https://i.imgur.com/znvENZyh.jpg)
Nice folders too!
Post by: Wspeed on January 15, 2020, 07:00:29 PM
Post by: Ray S on January 15, 2020, 09:08:38 PM
Post by: Rapidray on January 15, 2020, 09:13:26 PM
Post by: toolguy on January 15, 2020, 09:40:12 PM
EvoWood S557. :tu:Those are nice Max,congrats.
Even though this is a 5-layer SAK, it’s quite compact (84mm length) and carries well in the pocket on a lanyard.
Happy Wood Handled Wednesday everyone :cheers:Good-on-ya W.
(https://i.imgur.com/Ji9ddZ7.jpg)
Ebony ChurchillGood looking Churchill,Steve.
(https://i.imgur.com/znvENZyh.jpg)
Nothing special for WHW today;just an old Ulster barlow whose original handles had seen better days. Re-handled with some scrap wood from an old cigar box.No idea what the wood is but it is very soft and easy to work(not balsa).Very interesting appearance of that mystery wood,congrats Ray.
This is a Buck 110 I found on their website.It was a limited edition with very few made.
Buck termed it Burl wood without mention the species.
Post by: Rapidray on January 15, 2020, 10:01:48 PM
Those are nice Max,congrats.That is nice! :like: :cheers:
Good-on-ya W.
Good looking Churchill,Steve.
Very interesting appearance of that mystery wood,congrats Ray.
This is a Buck 110 I found on their website.It was a limited edition with very few made.
Buck termed it Burl wood without mention the species.
Post by: Wspeed on January 15, 2020, 10:31:23 PM
Post by: Wspeed on January 15, 2020, 10:32:29 PM
you have done with the handles :like: :tu:
Post by: Ray S on January 15, 2020, 11:01:33 PM
Thought I would post this up even though it isn't a knife. Found at a flea market many years ago it is a ruler made of different types of wood in one inch segments.Labelled as to the type of wood on the back. I use it a lot on my drawings.
Post by: David on January 15, 2020, 11:12:47 PM
Post by: David on January 15, 2020, 11:14:50 PM
Post by: Rapidray on January 16, 2020, 12:09:30 AM
Desert Ironwood and Oak.Sweet :like: :cheers:
Post by: SteveC on January 16, 2020, 12:13:44 AM
Post by: Wspeed on January 16, 2020, 12:16:56 AM
Post by: Sos24 on January 16, 2020, 01:00:10 AM
My contribution of Compact with Birdseye Maple
(https://uploads.tapatalk-cdn.com/20200116/46cec2d0388ff84e5a740a9625a37540.jpg)
Post by: SteveC on January 16, 2020, 01:46:31 AM
Post by: toolguy on January 16, 2020, 03:19:15 AM
Post by: toolguy on January 16, 2020, 03:20:38 AM
Wood handle Wednesday never disappoints. :drool: So many gorgeous wood handled knives to admire. :drool:
My contribution of Compact with Birdseye Maple
(https://uploads.tapatalk-cdn.com/20200116/46cec2d0388ff84e5a740a9625a37540.jpg)
Nice picture SOS.
Post by: toolguy on January 16, 2020, 03:21:55 AM
Desert Ironwood and Oak.
David,is your Ranger made from 5160?
Regardless it's nice.
Post by: Sos24 on January 16, 2020, 04:03:18 AM
Post by: comis on January 16, 2020, 10:25:27 AM
(https://i.imgur.com/DK48nAh.jpg)
Post by: David on January 16, 2020, 11:46:02 AM
David,is your Ranger made from 5160?
Regardless it's nice.
Yes sir it is. :tu:
Post by: David on January 16, 2020, 11:46:47 AM
I might be a little late for this, but previously posted on Ranger Challenge, my 112 Ranger:
(https://i.imgur.com/DK48nAh.jpg)
Nice pic of your Ranger! :like:
Post by: comis on January 16, 2020, 01:30:51 PM
Yes sir it is. :tu:
That's sweet! :tu:
Nice pic of your Ranger! :like::cheers:
Post by: Rapidray on January 16, 2020, 02:36:33 PM
I might be a little late for this, but previously posted on Ranger Challenge, my 112 Ranger:Nice :like: :cheers:
(https://i.imgur.com/DK48nAh.jpg)
Post by: Wspeed on January 16, 2020, 04:41:09 PM
Post by: Sos24 on January 16, 2020, 06:14:44 PM
Nice knives for WHW Sos and comis :like: :tu:
Thanks:tu:
Post by: SteveC on January 22, 2020, 04:37:15 PM
Bloodwood
(https://i.imgur.com/UNzsGmih.jpg)
Post by: Rapidray on January 22, 2020, 04:46:37 PM
Post by: Wspeed on January 22, 2020, 05:13:15 PM
Post by: Wspeed on January 22, 2020, 05:13:55 PM
(https://i.imgur.com/FdyqwsU.jpg)
Post by: SteveC on January 22, 2020, 05:33:37 PM
Post by: Wspeed on January 22, 2020, 05:34:55 PM
Post by: Rapidray on January 22, 2020, 06:44:15 PM
Happy Wood Handled Wednesday everyone :cheers::iagree: :cheers:
(https://i.imgur.com/FdyqwsU.jpg)
Post by: Sos24 on January 22, 2020, 09:00:47 PM
Post by: Wspeed on January 22, 2020, 09:01:17 PM
Post by: Ray S on January 23, 2020, 12:46:42 AM
A Boker 2000
A Gerber 400
A Gerber Model 1
A Gerber Boot knife
Post by: Wspeed on January 23, 2020, 12:47:40 AM
Post by: Ray S on January 23, 2020, 12:50:03 AM
A Gerber Silver Knight with Michelin advertising.
A Parker Bench Made with toggle lock release.
A Precise Big Paw.
A 4 line Camillus TL-29 from a WWII telephone linesman's kit.
Post by: Wspeed on January 23, 2020, 12:54:25 AM
Post by: Rapidray on January 23, 2020, 01:01:28 AM
Post by: SteveC on January 23, 2020, 01:04:21 AM
Post by: Sos24 on January 23, 2020, 02:14:54 AM
My WHW knife was the Maple scaled compact
(https://uploads.tapatalk-cdn.com/20200123/8ebb575d165c9daac78acd223c214940.jpg)
Post by: David on January 23, 2020, 02:27:47 AM
Post by: toolguy on January 23, 2020, 03:08:52 AM
Congratulations everyone.
This is a David Boye Skinning Knife.These handles are made from some nicely grained Cocobola.
Post by: SteveC on January 23, 2020, 03:18:47 AM
Post by: Rapidray on January 23, 2020, 04:17:08 AM
Some really gorgeous knives, Ray SNice :like: :tu:
My WHW knife was the Maple scaled compact
(https://uploads.tapatalk-cdn.com/20200123/8ebb575d165c9daac78acd223c214940.jpg)
Post by: Rapidray on January 23, 2020, 04:17:41 AM
:woohoo: WHW! Good turn out today! Sucker Rod wood today.Nice David :like: :cheers:
Post by: Rapidray on January 23, 2020, 04:18:14 AM
There are some very cool and unique knives displayed today.Nice :tu:
Congratulations everyone.
This is a David Boye Skinning Knife.These handles are made from some nicely grained Cocobola.
Post by: Sos24 on January 23, 2020, 04:58:06 AM
Nice skinner toolguy.
Post by: Wspeed on January 23, 2020, 02:38:37 PM
Post by: Ray S on January 29, 2020, 05:40:50 AM
Both knives are made by Kershaw and were limited edition models. The first one is the Eagle that has an eagle in flight for a guard. The second is the Ram and has a ram's head for a guard and a cutout in the blade with a tiny ram inset into it. A custom knifemaker from Texas(Jim Pugh)used to make a lot of knives like this but I'm not sure he had anything to do with this knife.
Post by: Ray S on January 29, 2020, 05:43:30 AM
Post by: Sos24 on January 29, 2020, 05:44:47 AM
Post by: SteveC on January 29, 2020, 05:55:06 AM
Post by: mikekoz on January 29, 2020, 10:38:15 AM
Post by: David on January 29, 2020, 11:40:11 AM
Post by: sak60 on January 29, 2020, 12:38:50 PM
Post by: Wspeed on January 29, 2020, 02:03:07 PM
Post by: Rapidray on January 29, 2020, 02:45:40 PM
Getting ready to retire for the night so I thought I would put up my contributions to WHW.Wow, that is kinda cool looking. Never seen anything like that - thanks for sharing with us! :like: :cheers:
Both knives are made by Kershaw and were limited edition models. The first one is the Eagle that has an eagle in flight for a guard. The second is the Ram and has a ram's head for a guard and a cutout in the blade with a tiny ram inset into it. A custom knifemaker from Texas(Jim Pugh)used to make a lot of knives like this but I'm not sure he had anything to do with this knife.
Post by: sak60 on January 29, 2020, 02:46:29 PM
Gorgeous looking knives Ray and sak for WHW :like: :tu:Thank you Wspeed :salute:
Post by: Rapidray on January 29, 2020, 02:46:45 PM
A closeup of the inset in the blade.That is beautiful :like: :cheers:
Post by: Rapidray on January 29, 2020, 02:47:44 PM
‘73 PumaI remember those! :cheers:
Post by: Wspeed on January 29, 2020, 04:32:25 PM
(https://i.imgur.com/p1xaSAO.jpg)
Post by: Rapidray on January 29, 2020, 05:12:18 PM
Post by: SteveC on January 29, 2020, 05:34:22 PM
(https://i.imgur.com/eSWNVlLh.jpg)
Post by: Wspeed on January 29, 2020, 06:30:13 PM
Post by: Wspeed on January 29, 2020, 06:30:37 PM
Very nice 110 Ws :like: :cheers:Thanks Rapidray :cheers: :drink: :D
Post by: Rapidray on January 29, 2020, 08:26:05 PM
:iagree: and Happy WHW !:drool: Very nice Steve :like: :cheers:
(https://i.imgur.com/eSWNVlLh.jpg)
Post by: sak60 on January 30, 2020, 12:20:06 AM
Happy WHW everyone :cheers::like:
(https://i.imgur.com/p1xaSAO.jpg)
That’s got some nice decking :tu:
:iagree: and Happy WHW !:like:
(https://i.imgur.com/eSWNVlLh.jpg)
Nice rich colour.
Post by: Wspeed on January 30, 2020, 12:32:43 AM
Post by: toolguy on January 30, 2020, 03:12:06 AM
:iagree: and Happy WHW !
(https://i.imgur.com/eSWNVlLh.jpg)
Steve that's a beautiful knife.Such symmetry is hard to find.The grind on that blade is my idea of a perfect clip point with character.
Congrats.
Post by: toolguy on January 30, 2020, 03:22:17 AM
This is a Blade Trader made by Kai of Japan for Kershaw.It came in a very cool package with 6 blades.
Post by: SteveC on January 30, 2020, 04:23:59 AM
Post by: Sos24 on January 30, 2020, 05:26:24 AM
‘73 Puma
Beautiful Puma.
Happy WHW everyone :cheers:
(https://i.imgur.com/p1xaSAO.jpg)
I love the wood grain on that Buck
:iagree: and Happy WHW !
(https://i.imgur.com/eSWNVlLh.jpg)
Beautiful knife
Post by: sak60 on January 30, 2020, 09:10:06 AM
Post by: Wspeed on January 30, 2020, 02:09:20 PM
Post by: Wspeed on January 30, 2020, 02:11:21 PM
Here is something different for wood-handled-Wednesday.
This is a Blade Trader made by Kai of Japan for Kershaw.It came in a very cool package with 6 blades.
Nice knife for WHW toolguy that is very handy :like: :tu:
Post by: Ray S on January 31, 2020, 01:39:29 AM
Here is something different for wood-handled-Wednesday.
This is a Blade Trader made by Kai of Japan for Kershaw.It came in a very cool package with 6 blades.
That is the first one of those I have seen with a wood handle. I bought one when they first came out and mine has Zytel(or some other such material)handle. I love knives that have multiple replaceable blades;I may have to post a few.
And before I forget it;thanks to all who responded to my posts.Sometimes I forget to do so;must be my,"chronologically-challenged" state of mind.
Post by: toolguy on January 31, 2020, 03:12:11 AM
That is the first one of those I have seen with a wood handle. I bought one when they first came out and mine has Zytel(or some other such material)handle. I love knives that have multiple replaceable blades;I may have to post a few.
And before I forget it;thanks to all who responded to my posts.Sometimes I forget to do so;must be my,"chronologically-challenged" state of mind.
Here is the one to which you are referring.
Post by: Ray S on January 31, 2020, 04:42:31 PM
Here is the one to which you are referring.That is the little devil!
Post by: SteveC on February 05, 2020, 05:22:31 PM
(https://i.imgur.com/czRY22Hh.jpg)
Post by: Rapidray on February 05, 2020, 05:40:25 PM
Post by: Wspeed on February 05, 2020, 06:54:43 PM
Post by: Ray S on February 05, 2020, 10:38:19 PM
#1 A 3 line Camillus with ebony handles and curved stamp on secondary blade circa pre-WWI
#2 A Camillus 4 line;the so-called,"Red Cross" knife given to soldiers in WWI
#3 A Camillus pruner,
#4 A Camillus TL-29 style electrician's knife.
Post by: Rapidray on February 05, 2020, 10:45:30 PM
Post by: SteveC on February 05, 2020, 10:47:25 PM
Post by: Wspeed on February 05, 2020, 11:34:13 PM
Post by: David on February 06, 2020, 02:56:10 AM
:woohoo: It's WHW !
(https://i.imgur.com/czRY22Hh.jpg)
GEC did a really good job on the Rams Foot 93. Your Cocobolo is a real stunner buddy! :drool: :like:
Post by: SteveC on February 06, 2020, 03:40:25 AM
Post by: SteveC on February 12, 2020, 05:23:45 PM
(https://i.imgur.com/njTiXUwh.jpg)
Post by: Max Stone on February 12, 2020, 05:25:08 PM
Post by: Rapidray on February 12, 2020, 06:04:48 PM
:woohoo: It's WHW !And two great knives with wood scales! :like: :cheers:
(https://i.imgur.com/njTiXUwh.jpg)
Post by: Wspeed on February 12, 2020, 07:51:12 PM
Post by: Ray S on February 12, 2020, 09:52:04 PM
F.A.Koch folding hunter.
Humason & Beckley coke bottle folding hunter.
Wilbert Cutlery Co. coke bottle folding hunter.
Unmarked large folder with hooked blade,saw.pruning blade,and bottle opener/cap lifter on spine.
Post by: David on February 12, 2020, 10:26:47 PM
The Camillus is Beech wood I think. :think: :dunno: The Case is Walnut.
Post by: SteveC on February 12, 2020, 10:40:30 PM
:woohoo: WHW! Good ones Steve and Ray.
The Camillus is Beech wood I think. :think: :dunno: The Case is Walnut.
Nice! I was wondering if that Utility knife had jigged wood handles. That Post exchange knife I had was jigged Rosewood.
Can you take a close up of the grain ?
Post by: Wspeed on February 12, 2020, 10:41:34 PM
Post by: Rapidray on February 12, 2020, 11:42:56 PM
Four for WHWNice :cheers:
F.A.Koch folding hunter.
Humason & Beckley coke bottle folding hunter.
Wilbert Cutlery Co. coke bottle folding hunter.
Unmarked large folder with hooked blade,saw.pruning blade,and bottle opener/cap lifter on spine.
Post by: SteveC on February 12, 2020, 11:43:50 PM
Post by: Rapidray on February 12, 2020, 11:43:54 PM
:woohoo: WHW! Good ones Steve and Ray.Nice duo for today’s wood Wednesday :cheers :like:
The Camillus is Beech wood I think. :think: :dunno: The Case is Walnut.
Post by: David on February 13, 2020, 01:18:40 AM
Nice! I was wondering if that Utility knife had jigged wood handles. That Post exchange knife I had was jigged Rosewood.
Can you take a close up of the grain ?
The covers are wore down and heavily stained. Dont think a close up would do any good. I thought that I'd read somewhere the WWII Camillus knives were covered with Beech wood. But it is probably Rose wood as that was a common wood used for knife covers at the time. This knife is odd in that the covers are heavily pocket worn the knife had so much pocket lint inside of it the sheep foot blade would not snap shut. The blades are mostly full and still have some of the original finish. It appears this knife lived in a pocket or for years and was hardly ever used. After cleaning it out and a good oiling it has a nice stout action and walks and talks almost like new. It sharpened up nicely as these old Camillus knives do. :)
Post by: SteveC on February 13, 2020, 01:48:52 AM
Post by: toolguy on February 13, 2020, 03:35:06 AM
This is a Buck headless 110 w/mirror polished blade,burl handles and the Boone & Crockett logo.
Post by: David on February 13, 2020, 03:45:16 AM
Post by: toolguy on February 13, 2020, 03:52:55 AM
That's a real beauty Toolguy! 8) :like:
Thank you David.
I've been fortunate to have purchased a similar set consisting of a 112 and a 113 with less dramatic burl wood and the B&C logo.
Post by: Rapidray on February 13, 2020, 04:06:01 AM
Very nice knives presented today.Congrats everyone.Oh boy that is a very nice looking 110 :cheers: :tu:
This is a Buck headless 110 w/mirror polished blade,burl handles and the Boone & Crockett logo.
Post by: SteveC on February 13, 2020, 04:26:11 AM
Post by: toolguy on February 13, 2020, 04:39:52 AM
Oh boy that is a very nice looking 110 :cheers: :tu:
Nice one TG ! :like:
Thank you guys.
I'm looking on the bay for some more interesting or different knives.
Post by: Rapidray on February 13, 2020, 04:43:12 AM
Post by: Sos24 on February 13, 2020, 05:50:16 AM
Very nice knives presented today.Congrats everyone.
This is a Buck headless 110 w/mirror polished blade,burl handles and the Boone & Crockett logo.
Gorgeous 110
Post by: Sos24 on February 13, 2020, 05:54:55 AM
(https://uploads.tapatalk-cdn.com/20200213/d542cfec53597bc1a5668e68da0f0ce7.jpg)
Post by: SteveC on February 13, 2020, 02:11:09 PM
Post by: Wspeed on February 13, 2020, 02:13:35 PM
Post by: Rapidray on February 13, 2020, 07:12:14 PM
Ferrum Forge Gent backing-up the Fieldmaster for WHWNice duo :like: :cheers:
(https://uploads.tapatalk-cdn.com/20200213/d542cfec53597bc1a5668e68da0f0ce7.jpg)
Post by: Sos24 on February 13, 2020, 09:24:47 PM
Post by: David on February 14, 2020, 02:55:25 AM
Ferrum Forge Gent backing-up the Fieldmaster for WHW
(https://uploads.tapatalk-cdn.com/20200213/d542cfec53597bc1a5668e68da0f0ce7.jpg)
That Ferrum Forge is a nice looking knife! :like:
Post by: Sos24 on February 14, 2020, 03:12:48 AM
That Ferrum Forge is a nice looking knife! :like:
Thanks. It is one of my favorite small flippers.
Post by: Ray S on February 19, 2020, 03:26:36 PM
Post by: Rapidray on February 19, 2020, 03:28:45 PM
Post by: Wspeed on February 19, 2020, 04:21:00 PM
Post by: Wspeed on February 19, 2020, 04:53:22 PM
(https://i.imgur.com/12kinkd.jpg)
Post by: Rapidray on February 19, 2020, 05:30:29 PM
Post by: SteveC on February 19, 2020, 05:40:06 PM
(https://i.imgur.com/73V6vxUh.jpg)
Post by: Wspeed on February 19, 2020, 06:27:35 PM
Post by: Wspeed on February 19, 2020, 06:28:07 PM
Post by: Rapidray on February 19, 2020, 09:11:15 PM
Nice ones to get us started !Very nice and great reflections off the bolsters! :like: :cheers:
(https://i.imgur.com/73V6vxUh.jpg)
Post by: David on February 19, 2020, 10:24:16 PM
Haven't seen any WHW posts yet so I guess I'll start it off.This one probably qualifies as the ugliest knife I have ever seen and I bought it for that very reason. Etched,"Ruth 1990" on the side of a 5/16ths inch thick blade with slabs of wood riveted on,it is cumbersome and crude.Not sure what the crossed eyeballs signify.
Interesting knife Ray. :tu:
Happy Wood Handled Wednesday everyone :cheers:
(https://i.imgur.com/12kinkd.jpg)
Nice Buck Speedy. :like:
Nice ones to get us started !
(https://i.imgur.com/73V6vxUh.jpg)
Verah nice Cocobolo Steve! 8)
Post by: David on February 19, 2020, 10:25:53 PM
Post by: Wspeed on February 19, 2020, 10:40:09 PM
Post by: Rapidray on February 19, 2020, 11:38:46 PM
Post by: sak60 on February 19, 2020, 11:48:36 PM
Post by: Wspeed on February 20, 2020, 12:06:19 AM
Post by: Rapidray on February 20, 2020, 12:21:51 AM
Post by: SteveC on February 20, 2020, 01:16:21 AM
Case 11031 SHCC
Always love to see that old Rope knife ! :tu:
White Hunter.
Very 8) knife ! :like:
Post by: David on February 20, 2020, 01:46:01 AM
White Hunter.
8) knife sak60 :like:
Post by: sak60 on February 20, 2020, 02:02:45 AM
Post by: toolguy on February 20, 2020, 04:38:38 AM
This is a Case 54 Trapper with very dark ebony.
Post by: Rapidray on February 20, 2020, 03:23:38 PM
Post by: Wspeed on February 20, 2020, 05:40:33 PM
Post by: SteveC on February 26, 2020, 04:24:31 PM
(https://i.imgur.com/ah9Obd9.jpg)
Post by: Rapidray on February 26, 2020, 05:02:56 PM
Post by: Wspeed on February 26, 2020, 06:26:16 PM
Post by: Ray S on February 26, 2020, 09:11:01 PM
#1 A Browning USA double lock back with interframe sides.
#2 A Compass Industries mini 110 clone with some added file work by me.
#3 A small folder made for Cabelas.
#4 A pair of G-96 multi-blades.
Post by: Wspeed on February 26, 2020, 10:34:31 PM
Post by: toolguy on February 27, 2020, 01:12:44 AM
Post by: SteveC on February 27, 2020, 01:20:50 AM
Post by: David on February 27, 2020, 01:50:28 AM
Post by: David on February 27, 2020, 01:53:04 AM
Post by: SteveC on February 27, 2020, 03:43:53 AM
Post by: Rapidray on February 27, 2020, 06:31:21 AM
A few for WHW:Very nice selection of wood handles Ray! :like: :cheers:
#1 A Browning USA double lock back with interframe sides.
#2 A Compass Industries mini 110 clone with some added file work by me.
#3 A small folder made for Cabelas.
#4 A pair of G-96 multi-blades.
Post by: Rapidray on February 27, 2020, 06:32:01 AM
This is a Case 7254 Trapper with oak scales.Those are some great looking scales! :like: :cheers:
Post by: Rapidray on February 27, 2020, 06:32:48 AM
:woohoo: WHW! Remington Electrician.Nice and a Remington to boot! :like: :cheers:
Post by: Ray S on February 27, 2020, 06:53:04 AM
:woohoo: WHW! Remington Electrician.Very nice! Thanks to all who posted;this is my favorite thread.
Post by: Wspeed on February 27, 2020, 02:50:10 PM
Post by: SteveC on March 04, 2020, 04:14:44 PM
(https://i.imgur.com/a7Td0Hr.jpg)
Post by: Wspeed on March 04, 2020, 04:47:14 PM
Post by: Sos24 on March 05, 2020, 05:27:20 AM
My WHW was a Utica Trapper
(https://uploads.tapatalk-cdn.com/20200305/7112a11d916273cf114788e78ee69e1e.jpg)
Post by: SteveC on March 05, 2020, 02:10:46 PM
Post by: Wspeed on March 05, 2020, 02:20:55 PM
Post by: Sos24 on March 06, 2020, 03:43:43 AM
Post by: Ray S on March 11, 2020, 04:24:44 AM
Waiting for the electrician.......or someone like him. The title of an old comedy album by the Firesign Theater.
Some electrician's knives.
Post by: Ray S on March 11, 2020, 04:25:53 AM
Post by: David on March 11, 2020, 10:57:57 AM
Post by: SteveC on March 11, 2020, 01:18:56 PM
Post by: Wspeed on March 11, 2020, 02:52:37 PM
Post by: Wspeed on March 11, 2020, 04:39:27 PM
(https://i.imgur.com/tezYFyH.jpg)
Post by: SteveC on March 11, 2020, 08:27:03 PM
Happy WHW ! :cheers:
Bloodwood SYW
(https://i.imgur.com/6KbaXSR.jpg)
Post by: Wspeed on March 11, 2020, 09:24:57 PM
Nice pic and knife for WHW of yours :like: :tu:
Post by: David on March 11, 2020, 09:44:52 PM
Post by: Wspeed on March 11, 2020, 10:16:05 PM
Post by: David on March 11, 2020, 11:40:00 PM
Nice one Wim and same to you !
Happy WHW ! :cheers:
Bloodwood SYW
(https://i.imgur.com/6KbaXSR.jpg)
Beautrful wood on the SYW! :tu: :like:
Post by: SteveC on March 12, 2020, 12:52:21 AM
:woohoo: Desert Iron Wood and Walnut for WHW!
(https://i.imgur.com/hEXNxNs.png)
Post by: Sos24 on March 12, 2020, 01:21:51 AM
Mine was a Utica Stockman
(https://uploads.tapatalk-cdn.com/20200312/ca0aea5e8eb188402550b44f0d76b27f.jpg)
Post by: SteveC on March 12, 2020, 01:36:46 AM
Post by: Wspeed on March 12, 2020, 01:59:10 PM
Post by: Sos24 on March 12, 2020, 07:53:48 PM
Post by: Wspeed on March 18, 2020, 04:51:55 PM
(https://i.imgur.com/2qLpAYW.jpg)
Post by: SteveC on March 18, 2020, 05:31:48 PM
Post by: SteveC on March 18, 2020, 05:32:22 PM
Ebony 74 Stallion
(https://i.imgur.com/3A6ilSc.jpg)
Post by: Wspeed on March 18, 2020, 06:25:21 PM
Post by: Ray S on March 18, 2020, 07:29:56 PM
Boker
Browning double lock back
Browning single blade
Case Shark Tooth with Pakkawood handles.
Post by: Ray S on March 18, 2020, 07:32:24 PM
Kershaw
Smith&Wesson interframe with wood inserts.
Smith&Wesson 6060 designed by Blackie Collins.
Sharp folder.
Post by: SteveC on March 18, 2020, 08:38:12 PM
Post by: Wspeed on March 18, 2020, 08:48:54 PM
Post by: Sos24 on March 19, 2020, 12:34:38 AM
Great collection Ray
Post by: Wspeed on March 19, 2020, 12:35:21 AM
Post by: Rapidray on March 19, 2020, 01:31:14 AM
Post by: Wspeed on March 25, 2020, 04:46:30 PM
(https://i.imgur.com/T7gHcfo.jpg)
Post by: SteveC on March 25, 2020, 04:48:40 PM
Walnut Sword Brand by Camillus
(https://i.imgur.com/CtxyxGt.jpg)
Post by: Wspeed on March 25, 2020, 04:51:26 PM
Nice pair of knives for WHW of yours :like: :tu:
Post by: Ray S on March 25, 2020, 09:48:29 PM
#1 A balisong by Frost Cutlery Co.when they were buying knives from Japan.
#2 A chopping knife by Hachinette Thurmauer Co. of France.
#3 A John Ek Model 6 side knife from WWII
#4 A side knife by ErlingVandegal
Post by: Ray S on March 25, 2020, 09:50:46 PM
#1An actor's wooden prop knife.
#2 A pair of oyster shucking knives.
#3 A Camillus TL-29 from a telephone linesman's kit
Post by: Wspeed on March 25, 2020, 10:00:51 PM
Post by: Wspeed on April 01, 2020, 05:03:04 PM
(https://i.imgur.com/ZlI5Zr0.jpg)
Post by: SteveC on April 01, 2020, 05:37:37 PM
Cocobolo x 2
(https://i.imgur.com/UQXLXis.jpg)
Post by: Wspeed on April 01, 2020, 06:45:49 PM
of knives for WHW of yours :cheers: :like:
Post by: Ray S on April 01, 2020, 11:00:17 PM
#1 A Cattaraugus floating fish knife.
#2 Top to bottom:R.J.Richter-Japan-KA-BAR-Colonial-Cressi Italy.
#3 Three fish scalers;the only one marked is the top one:a PALRH-22
#4 Mora knife with a carved fish handle.
Post by: Wspeed on April 02, 2020, 02:23:11 PM
Post by: Wspeed on April 08, 2020, 05:44:44 PM
(https://i.imgur.com/sAk7a7B.jpg)
Post by: SteveC on April 08, 2020, 05:45:58 PM
Bloodwood Whittler
(https://i.imgur.com/E9LhjUf.jpg)
Post by: Wspeed on April 08, 2020, 05:49:46 PM
Nice pair of knives for WHW of yours :like: :tu:
Post by: Ray S on April 15, 2020, 07:44:36 AM
#1 is a huge unmarked razor probably made for barber's use only.
#2 is marked Deane and is 1800 or slightly earlier.
#3 is another huge razor made by Wade & Butcher.
Post by: SteveC on April 15, 2020, 01:53:30 PM
Post by: Wspeed on April 15, 2020, 01:54:50 PM
Post by: Wspeed on April 15, 2020, 03:27:15 PM
(https://i.imgur.com/6noWKrn.jpg)
Post by: SteveC on April 15, 2020, 05:54:01 PM
HWHW ! :cheers:
(https://i.imgur.com/FIb38xd.jpg)
Post by: Wspeed on April 15, 2020, 05:55:53 PM
Nice knife and pic for WHW Steve :like: :tu:
Post by: David on April 16, 2020, 12:30:16 AM
Post by: David on April 16, 2020, 12:41:54 AM
Happy Wood Handled Wednesday everyone :cheers:
(https://i.imgur.com/6noWKrn.jpg)
Good pic of that Buck! :like:
Post by: David on April 16, 2020, 12:44:23 AM
:like: :tu:
HWHW ! :cheers:
(https://i.imgur.com/FIb38xd.jpg)
:like:. The black Stallion! 8)
Post by: SteveC on April 16, 2020, 01:23:15 AM
:woohoo: WHW! Some Cocobolo for WHW
Sweet grain ! :like:
Post by: Sos24 on April 16, 2020, 05:46:42 AM
WHW 15 April. Decided to post up a couple of razors for a change.Some sharp looking razors
#1 is a huge unmarked razor probably made for barber's use only.
#2 is marked Deane and is 1800 or slightly earlier.
#3 is another huge razor made by Wade & Butcher.
Happy Wood Handled Wednesday everyone :cheers:Nice Buck. Love the colors in the wood grain
(https://i.imgur.com/6noWKrn.jpg)
:like: :tu:
HWHW ! :cheers:
Nice knife
:woohoo: WHW! Some Cocobolo for WHW
Nice wood grain.
Post by: Wspeed on April 16, 2020, 02:21:18 PM
And nice knife of yours for WHW David :like: :tu:
Post by: sak60 on April 22, 2020, 02:56:23 AM
Post by: pfrsantos on April 22, 2020, 12:43:22 PM
:cheers:
That's some vintage beauty!
:like: :like:
Post by: pfrsantos on April 22, 2020, 12:44:00 PM
(https://forum.multitool.org/index.php?action=dlattach;topic=77905.0;attach=475574;image)
Post by: Wspeed on April 22, 2020, 01:51:33 PM
Post by: SteveC on April 22, 2020, 01:52:48 PM
Post by: sak60 on April 22, 2020, 02:24:37 PM
That's some vintage beauty!Thanks pfr. Nice 110 :cheers:
:like: :like:
Thanks Wspeed and Steve :salute:
Post by: Edi on April 22, 2020, 03:41:25 PM
Post by: Wspeed on April 22, 2020, 04:18:36 PM
Definitely a nice looking knife :tu:
Post by: SteveC on April 22, 2020, 04:29:04 PM
Post by: SteveC on April 22, 2020, 04:29:33 PM
(https://i.imgur.com/ID9XR8Q.jpg)
Post by: Wspeed on April 22, 2020, 04:34:15 PM
Post by: Wspeed on April 22, 2020, 05:35:06 PM
(https://i.imgur.com/xYhPDRb.jpg)
Post by: SteveC on April 22, 2020, 06:06:53 PM
Post by: Edi on April 22, 2020, 06:13:45 PM
Post by: Edi on April 22, 2020, 06:15:08 PM
Post by: LoopCutter on April 22, 2020, 08:21:52 PM
Post by: Wspeed on April 22, 2020, 09:28:31 PM
Post by: sak60 on April 23, 2020, 04:43:44 AM
Post by: Ray S on April 23, 2020, 05:44:26 AM
#1Unmarked folder in the shape of a 12 ga shotgun shell
#2 Similar knife from Kershaw but this one has a bird hook for a secondary blade instead of a screwdriver.
#3 Shotshell knife marked Winchester.
#4 A handmade folder.
Post by: Ray S on April 23, 2020, 05:47:30 AM
#1 to 3 Handmade knives all wood.
#4 A handmade butcher knife with the edge on the straight part of the blade.
Post by: Mcfal12 on April 23, 2020, 01:39:04 PM
Post by: Wspeed on April 23, 2020, 01:52:38 PM
Post by: SteveC on April 23, 2020, 01:53:34 PM
Post by: Wspeed on April 29, 2020, 05:19:27 PM
(https://i.imgur.com/xIgUnN9.jpg)
Post by: G-Dizzle on April 29, 2020, 06:54:18 PM
(https://uploads.tapatalk-cdn.com/20200429/03b98846b6b27ebb06d794dda985ce0b.plist)
Post by: Wspeed on April 29, 2020, 09:14:42 PM
Post by: SteveC on April 29, 2020, 09:24:25 PM
Ebony Churchill
(https://i.imgur.com/H8BKrRC.jpg)
Post by: Wspeed on April 29, 2020, 09:57:05 PM
Post by: Ray S on April 29, 2020, 09:59:31 PM
Post by: David on April 30, 2020, 01:14:46 AM
Post by: SteveC on April 30, 2020, 01:22:08 AM
Post by: Sos24 on April 30, 2020, 02:21:43 AM
A little late but I made it under the deadline.Those shot shell knives are sweet looking.
#1Unmarked folder in the shape of a 12 ga shotgun shell
#2 Similar knife from Kershaw but this one has a bird hook for a secondary blade instead of a screwdriver.
#3 Shotshell knife marked Winchester.
#4 A handmade folder.
Post by: Sos24 on April 30, 2020, 02:22:37 AM
Just a few wood-handled items.Nice group, especially like the SAK
(https://uploads.tapatalk-cdn.com/20200429/03b98846b6b27ebb06d794dda985ce0b.plist)
Post by: sak60 on April 30, 2020, 02:26:45 AM
Post by: Mcfal12 on April 30, 2020, 03:40:44 AM
Sucker Rod Oil Field Jack
Beautiful knife David!
Post by: SteveC on April 30, 2020, 05:49:30 AM
Just a few wood-handled items.
(https://uploads.tapatalk-cdn.com/20200429/03b98846b6b27ebb06d794dda985ce0b.plist)
Nice ! :like:
Post by: Wspeed on April 30, 2020, 02:12:35 PM
Post by: Wspeed on May 06, 2020, 06:57:33 PM
(https://i.imgur.com/7YO2KNF.jpg)
Post by: SteveC on May 06, 2020, 08:13:23 PM
(https://i.imgur.com/LAVqI22.jpg)
Post by: Ray S on May 06, 2020, 10:49:52 PM
#1 A Buck 110 still in the original package.What is unusual is the package art shows the nail nick on the opposite side.
#2 A Buck 110 marked Friends of the NRA Lenawee County(the county I reside in).
#3 A Buck 112 automatic that was recently gifted to me by a great friend.
#4 Another NRA knife with two different types of wood for the handles.
Post by: Wspeed on May 06, 2020, 10:54:59 PM
Post by: SteveC on May 07, 2020, 01:21:38 AM
Post by: Wspeed on May 13, 2020, 05:35:50 PM
(https://i.imgur.com/fzftsIH.jpg)
Post by: Ray S on May 14, 2020, 12:12:01 AM
#1 Big Buck Skinner from a maker in Utah
#2 Champion Made in Japan
#3 A near identical knife marked Maxam.
#4 A custom knife by J.Cottrill from Columbus Ohio
Post by: Ray S on May 14, 2020, 12:14:11 AM
#1 A John Russell knife from about 1870.
#2 Another John Russell with an unusual finger guard on the front bolster.
#3 a group of old style fish scalers.
Post by: SteveC on May 14, 2020, 12:20:47 AM
Bloodwood Whittler and a friend
(https://i.imgur.com/j3sdL9D.jpg)
Post by: Sos24 on May 14, 2020, 03:36:43 AM
Post by: SteveC on May 14, 2020, 05:32:25 AM
Post by: Wspeed on May 14, 2020, 02:09:37 PM
Post by: SteveC on May 20, 2020, 06:05:08 PM
(https://i.imgur.com/7TdGAQY.jpg)
(https://i.imgur.com/ztw1IBb.jpg)
Post by: Wspeed on May 20, 2020, 06:49:31 PM
Post by: Ray S on May 20, 2020, 08:58:30 PM
Post by: Wspeed on May 20, 2020, 10:15:40 PM
Post by: SteveC on May 20, 2020, 10:50:21 PM
Post by: David on May 20, 2020, 11:07:47 PM
Post by: SteveC on May 20, 2020, 11:36:01 PM
Post by: Wspeed on May 21, 2020, 12:00:02 AM
Post by: Sos24 on May 21, 2020, 04:07:45 AM
(https://uploads.tapatalk-cdn.com/20200521/082b0adea890144c94b42e4ab0bb10c4.jpg)
Post by: SteveC on May 21, 2020, 05:48:48 AM
Post by: Sos24 on May 21, 2020, 11:18:38 AM
Good looking Trapper Sherry ! :like::tu: thanks
Post by: Wspeed on May 21, 2020, 02:06:26 PM
Post by: Ray S on May 27, 2020, 03:12:24 PM
Post by: David on May 27, 2020, 03:17:48 PM
Post by: SteveC on May 27, 2020, 04:10:19 PM
Post by: Wspeed on May 27, 2020, 04:49:56 PM
Post by: Wspeed on May 27, 2020, 09:11:35 PM
(https://i.imgur.com/fqUWoL8.jpg)
Post by: Sos24 on May 28, 2020, 01:49:06 AM
Only one for Wood Handled Wednesday this week folks but a nice one: a 3 line Camillus(pre-WWI) senator pen with ebony handles in exceptional shape.It also features a curved stamp on the secondary blade.
Nice Cami Ray.
Happy Wood Handled Wednesday everyone :cheers:
(https://i.imgur.com/fqUWoL8.jpg)
Love the grain on that Buck
Post by: Sos24 on May 28, 2020, 01:49:32 AM
Post by: David on May 28, 2020, 04:24:37 AM
Post by: SteveC on May 28, 2020, 01:59:20 PM
Post by: Wspeed on May 28, 2020, 02:00:19 PM
Post by: Sos24 on May 29, 2020, 02:11:57 AM
Post by: Ron Who on June 02, 2020, 07:06:35 PM
Victorinox Hunter Pro in walnut.
Post by: Ron Who on June 02, 2020, 07:07:54 PM
Post by: Wspeed on June 02, 2020, 07:36:51 PM
Post by: ElevenBlade on June 03, 2020, 03:09:21 AM
I should be here in this thread much more often... I love wood and I have many wood handled knives.
Victorinox Hunter Pro in walnut.
:o The Walnut scales look amazing.
I had an obsession with wood-handled knives for a time - which is why I follow this thread.
My favorite was a Buck Tac-lite that I misplaced....
I carried a Buck 55-ish knockoff for many years as a teenager, up until about 20 years of age, and also had several C&C folders. they were all made by the same company, and I don't remember which it is.
Post by: David on June 03, 2020, 04:14:00 AM
I should be here in this thread much more often... I love wood and I have many wood handled knives.
Victorinox Hunter Pro in walnut.
Never hurts to be early. Beautiful walnut Ron! :like:
Post by: SteveC on June 03, 2020, 01:53:29 PM
Post by: SteveC on June 03, 2020, 09:28:32 PM
(https://i.imgur.com/pMZA9Af.jpg)
Post by: Wspeed on June 03, 2020, 09:50:33 PM
Post by: Ray S on June 04, 2020, 12:11:13 AM
Post by: Wspeed on June 04, 2020, 12:38:01 AM
Post by: SteveC on June 04, 2020, 01:10:10 AM
Post by: David on June 04, 2020, 01:31:40 AM
Ebony GEC 73
(https://i.imgur.com/pMZA9Af.jpg)
Black Stallion is as handsome as ever! :like:
Alterbach Swanwerk Germany single blade jack with wood handles jigged to look like bone.
:tu:
Post by: David on June 04, 2020, 01:41:16 AM
Post by: Sos24 on June 04, 2020, 02:57:51 AM
Post by: SteveC on June 04, 2020, 05:43:11 AM
Walnut
8) knife !
Post by: Wspeed on June 04, 2020, 01:53:18 PM
Post by: Ray S on June 10, 2020, 09:06:39 PM
#1,2,&3:Custom made wooden knives.
#4 A hand made folder with wooden handles.
Post by: Ray S on June 10, 2020, 09:09:00 PM
American Knife Co.
American Shear&Knife Co.
Holley Knife Co.
Henry Bernascone & Sons.
All these knives were made before 1900.
Post by: Ray S on June 10, 2020, 09:12:47 PM
#1 Camillus 3 line with curved stamp on secondary blade(pre-WWI)
#2 Camillus 3 line easy open(pre-WWI)
#3 Camillus Red Cross knife issued to troops during WWI.
#4 Camillus US Coast Guard knife issued in WWII. Wood handle is jigged to simulate bone.
Post by: Ray S on June 10, 2020, 09:15:52 PM
#1Unmarked Chinese knife.
#2 L.F.&C. boy's knife.
#3 & 4: Ulster tuxedo pattern in two sizes.
Post by: Wspeed on June 10, 2020, 09:52:55 PM
Post by: SteveC on June 10, 2020, 10:00:15 PM
Post by: SteveC on June 10, 2020, 10:01:03 PM
(https://i.imgur.com/X2Ttyhz.jpg)
Post by: David on June 10, 2020, 10:06:45 PM
Post by: David on June 10, 2020, 10:08:46 PM
Post by: SteveC on June 10, 2020, 10:13:58 PM
Post by: Wspeed on June 10, 2020, 11:47:51 PM
Post by: Sos24 on June 11, 2020, 04:57:24 AM
Nice knifes Steve and David.
Mine was a Ferrum Forge Gent
(https://uploads.tapatalk-cdn.com/20200611/b69a70f4554121bfd3f2d5001b265276.plist)
Post by: SteveC on June 11, 2020, 01:47:40 PM
Post by: Wspeed on June 11, 2020, 01:48:57 PM
Post by: Sos24 on June 12, 2020, 07:56:26 PM
Post by: Ray S on June 18, 2020, 12:17:35 AM
#1 A large folder marked Cobra Japan.This appears to be a clone of the next picture.
#2 An Imperial Pro Hunter.
#3 Same as #2 but etched,"Wildcat Skinner"
#4 A Rigid R-9 Apache folder when they were made in Santee California.
Post by: Ray S on June 18, 2020, 12:20:37 AM
#1 A large folder by Smith & Wesson before they went to China.
#2 Another S&W with slightly different colored wood.
#3 A pair of Smith & Wesson 6060 folders designed by Blackie Collins.
#4 An earlier Chinese lockback that is very well made.
Post by: Ray S on June 18, 2020, 12:23:26 AM
#1 A Chinese lock back similar to a USA made Browning.
#2 An unmarked folder with an unusual tapered nail nick.
#3 A Western S-521
#4 A Western S-522
Post by: SteveC on June 18, 2020, 01:07:26 AM
Post by: SteveC on June 18, 2020, 01:07:50 AM
(https://i.imgur.com/T2fOhqq.jpg)
Post by: David on June 18, 2020, 01:10:07 AM
Post by: David on June 18, 2020, 01:14:45 AM
Post by: SteveC on June 18, 2020, 03:34:51 AM
Post by: Sos24 on June 18, 2020, 06:50:50 AM
Seeing as how nobody has posted anything for WHW as yet I guess I'll post up a few.Lovely collection
#1 A large folder marked Cobra Japan.This appears to be a clone of the next picture.
#2 An Imperial Pro Hunter.
#3 Same as #2 but etched,"Wildcat Skinner"
#4 A Rigid R-9 Apache folder when they were made in Santee California.
Remington R21
(https://i.imgur.com/T2fOhqq.jpg)
Love the coloring of that wood grain
GEC 23 with Brazilian Cherry
Beautiful GEC
Post by: Sos24 on June 18, 2020, 06:51:35 AM
(https://uploads.tapatalk-cdn.com/20200618/ec9ae6ae1ba28fabf0febd7bfd5faf9b.plist)
Post by: SteveC on June 18, 2020, 05:14:51 PM
Post by: David on June 18, 2020, 05:19:52 PM
:like: :tu:
:iagree:
Post by: Ron Who on June 18, 2020, 05:28:17 PM
:nanadance: :nanadance: :nanadance:
Post by: Wspeed on June 18, 2020, 07:52:11 PM
Post by: SteveC on June 24, 2020, 06:27:47 PM
(https://i.imgur.com/8j5sHZO.jpg)
Happy WHW ! :cheers:
Post by: Wspeed on June 24, 2020, 09:17:49 PM
Post by: David on June 24, 2020, 10:20:46 PM
Ram Foot with Cocobolo covers
Post by: Wspeed on June 25, 2020, 12:00:10 AM
Post by: Sos24 on June 25, 2020, 12:16:05 AM
Post by: Sos24 on June 25, 2020, 02:48:00 AM
(https://uploads.tapatalk-cdn.com/20200625/c852e03794e987f4a3a3a1f616d70f2c.plist)
Post by: SteveC on June 25, 2020, 05:44:17 AM
Post by: Sos24 on June 25, 2020, 07:07:16 AM
Post by: Wspeed on June 25, 2020, 02:13:19 PM
Post by: SteveC on July 01, 2020, 04:28:43 PM
(https://i.imgur.com/UcZo50A.jpg)
Post by: Wspeed on July 01, 2020, 11:11:27 PM
Post by: toolguy on July 01, 2020, 11:25:53 PM
This popped up on the Buck website a few weeks ago.They only made 62.It's a 112 Ranger with nickel frame,genuine Ebony scales and an S-30-V drop point blade,which I re-profiled.
Post by: Wspeed on July 02, 2020, 12:24:11 AM
Post by: Sos24 on July 02, 2020, 03:59:20 AM
Real nice WHW Knives Steve and Tool Guy.
(https://uploads.tapatalk-cdn.com/20200702/08a22595c5f30d2acad5b252ebbc834a.jpg)
Post by: SteveC on July 02, 2020, 05:51:09 AM
:like: :tu:
Post by: Sos24 on July 02, 2020, 07:14:32 AM
NiceThanks:salute:CanoeBattleship ! :D
:like: :tu:
Post by: Wspeed on July 02, 2020, 03:07:18 PM
Post by: SteveC on July 08, 2020, 06:00:28 PM
(https://i.imgur.com/LE7R0PE.jpg)
Post by: Wspeed on July 08, 2020, 06:04:12 PM
Post by: toolguy on July 08, 2020, 08:55:26 PM
This is a Limited Edition knife that I carried today.
It's handles are crafted from desert ironwood with spacers made from turquoise and micarta.
Post by: Wspeed on July 08, 2020, 09:36:55 PM
Post by: SteveC on July 08, 2020, 11:28:40 PM
Fantastic knives everyone.
This is a Limited Edition knife that I carried today.
It's handles are crafted from desert ironwood with spacers made from turquoise and micarta.
Nice Barehead 112 !
Post by: David on July 09, 2020, 12:34:00 AM
Post by: David on July 09, 2020, 12:40:01 AM
Post by: SteveC on July 09, 2020, 01:10:25 AM
Post by: Wspeed on July 09, 2020, 02:23:10 PM
Post by: Aloha on July 09, 2020, 03:16:49 PM
Always happy to see that old Case ! :like: :tu:
:iagree: makes me smile to see it. :D
Post by: SteveC on July 15, 2020, 05:08:49 PM
(https://i.imgur.com/sMQ8vbA.jpg)
Post by: David on July 15, 2020, 05:12:44 PM
Cocobolo and Bloodwood
(https://i.imgur.com/sMQ8vbA.jpg)
:drool:. :like:
Post by: Wspeed on July 15, 2020, 07:09:21 PM
Post by: David on July 15, 2020, 10:23:15 PM
Post by: Ray S on July 15, 2020, 10:32:15 PM
Post by: SteveC on July 15, 2020, 11:29:52 PM
Post by: Wspeed on July 16, 2020, 02:07:31 PM
Post by: Aloha on July 16, 2020, 04:01:13 PM
Post by: SteveC on July 22, 2020, 03:20:43 PM
(https://i.imgur.com/KBAUAIq.jpg)
Post by: Wspeed on July 22, 2020, 09:42:14 PM
Post by: Ray S on July 22, 2020, 10:11:09 PM
#1 A Compass Industries Panther Bantam;sort of a miniature Buck 110.
#2 Made for Cabelas's
#3 A pair of Jet-Aer G-96 small knives.
#4 Gerber Silver Knight awards knife for Michelin tires.
Post by: Ray S on July 22, 2020, 10:13:35 PM
#1 Kershaw 22Caliber
#2 Precise Big Paw
#3 Japan knife marked R R in English text lettering.
#4 RU-KO Sport small lockback.
Post by: Wspeed on July 23, 2020, 04:05:13 PM
Post by: SteveC on July 23, 2020, 09:08:39 PM
Post by: SteveC on July 29, 2020, 11:30:53 PM
Ebony
(https://i.imgur.com/4EYtlDd.jpg)
Post by: Wspeed on July 29, 2020, 11:31:34 PM
Post by: Ray S on July 30, 2020, 12:18:38 AM
:woohoo: It's WHW !
Ebony
Beautiful knife Steve! Who is the maker?
Thought I wood(lol) post up some pictures of wooden handled Camillus knives. This may take a couple posts so please be patient.
The first knife is a 2 blade equal end jack with ebony handles that pre-dates World War one.That is when they used the so-called,"3 line" stamp. What is unusual is the stamp is curved on the secondary blade.
Post by: Poncho65 on July 30, 2020, 12:19:10 AM
(https://i.imgur.com/hyaUQgrh.jpg)
Post by: SteveC on July 30, 2020, 12:20:20 AM
Post by: SteveC on July 30, 2020, 12:20:50 AM
Beautiful knife Steve! Who is the maker?
Thought I wood(lol) post up some pictures of wooden handled Camillus knives. This may take a couple posts so please be patient.
The first knife is a 2 blade equal end jack with ebony handles that pre-dates World War one.That is when they used the so-called,"3 line" stamp. What is unusual is the stamp is curved on the secondary blade.
Thanks Ray , It's a Challenge Cutlery
Post by: Ray S on July 30, 2020, 12:22:27 AM
The second knife is the so-called,"Red Cross" knife and spoon combination that was dispensed to soldiers during World War One by the American Red Cross.This was when they first started using the so-called,"4 line" stamp.
Post by: Ray S on July 30, 2020, 12:24:55 AM
Also is a pruning knife.
Post by: Ray S on July 30, 2020, 12:29:57 AM
The last three are the infamous TL-29 electrician's knives;two of which are military issue.
BTW Thank you Steve;the Challenge is a beautiful knife and in great shape!
Post by: Wspeed on July 30, 2020, 12:31:10 AM
Post by: SteveC on July 30, 2020, 01:18:37 AM
Post by: Sos24 on July 30, 2020, 03:14:04 AM
Mine WHW was a Case Barlow.
(https://uploads.tapatalk-cdn.com/20200730/ea7cee927fae3ad148cbf715823a3fd3.jpg)
Post by: Wspeed on July 30, 2020, 05:30:54 PM
Post by: SteveC on July 30, 2020, 08:47:20 PM
Post by: Sos24 on July 31, 2020, 07:27:40 AM
Post by: SteveC on August 05, 2020, 08:37:13 PM
(https://i.imgur.com/y4ogcMs.jpg)
Post by: RF52 on August 05, 2020, 08:50:06 PM
Sent fra min FRD-L09 via Tapatalk
Post by: SteveC on August 05, 2020, 09:39:03 PM
Post by: Wspeed on August 05, 2020, 10:31:06 PM
Post by: Ray S on August 06, 2020, 12:08:21 AM
Post by: David on August 06, 2020, 01:23:54 AM
Cocobolo American Jack
(https://i.imgur.com/y4ogcMs.jpg)
Nice Cocobolo on that American Jack! :like:
Post by: Sos24 on August 06, 2020, 04:13:06 AM
Post by: SteveC on August 06, 2020, 05:43:29 AM
Post by: Wspeed on August 06, 2020, 02:20:08 PM
Post by: SteveC on August 12, 2020, 03:14:08 PM
(https://i.imgur.com/yysl8a9.jpg)
Post by: RF52 on August 12, 2020, 03:16:23 PM
Sent fra min FRD-L09 via Tapatalk
Post by: Ray S on August 12, 2020, 10:23:38 PM
Post by: Wspeed on August 12, 2020, 10:38:42 PM
Post by: Wspeed on August 12, 2020, 10:39:22 PM
Rosewood Peach PrunerNice pruner Steve :like: :tu:
(https://i.imgur.com/yysl8a9.jpg)
Post by: SteveC on August 13, 2020, 01:41:29 PM
The biggest & the smallest.
Sweet !
Post by: Echotech on August 14, 2020, 12:30:35 PM
Ok it’s Friday but hey
Sent from my iPhone using Tapatalk
Post by: SteveC on August 14, 2020, 01:26:24 PM
Post by: Ray S on August 19, 2020, 04:23:05 PM
#1 Smith & Wesson 6060 folder designed by Blackie Collins.No nail nick and for some reason the shield is located on the opposite side.
#2 A Smith & Wesson interframe with wood inserts.
#3 A Sharp 700 lockback
#4 A Sharp 700 fixed blade.
Post by: SteveC on August 19, 2020, 05:33:57 PM
Post by: SteveC on August 19, 2020, 05:34:36 PM
(https://i.imgur.com/VsMNmra.jpg)
Post by: Borg on August 19, 2020, 09:49:27 PM
Walnut for me too, Kizlyar Irbis
(https://live.staticflickr.com/65535/50245522696_362b1067ea_z.jpg)
Post by: SteveC on August 19, 2020, 10:09:00 PM
Post by: Ray S on August 26, 2020, 05:56:36 AM
Post by: SteveC on August 26, 2020, 01:38:02 PM
Post by: Wspeed on August 26, 2020, 02:08:48 PM
Post by: SteveC on August 26, 2020, 06:51:39 PM
Post by: Vjeko Posavac on August 30, 2020, 02:59:21 PM
Post by: SteveC on September 02, 2020, 06:29:43 PM
Post by: SteveC on September 02, 2020, 06:30:18 PM
(https://i.imgur.com/J1mtjJN.jpg)
(https://i.imgur.com/NWhcmDh.jpg)
Post by: Sos24 on September 02, 2020, 08:54:46 PM
Winkler SD1Cool Winkler
Schrade Walden 204 with Cocobolo handlesNice knife
(https://i.imgur.com/J1mtjJN.jpg)
(https://i.imgur.com/NWhcmDh.jpg)
Post by: Ray S on September 02, 2020, 09:17:23 PM
Post by: Ray S on September 02, 2020, 09:18:16 PM
Post by: Sos24 on September 03, 2020, 01:42:12 AM
Post by: David on September 03, 2020, 04:05:48 AM
Post by: SteveC on September 03, 2020, 05:49:36 AM
(https://uploads.tapatalk-cdn.com/20200902/274fabba52a79a9e88b0f0ac587f9103.plist)
Lovely grain on that one ! :dd:
Post by: Sos24 on September 03, 2020, 07:09:46 AM
Post by: SteveC on September 09, 2020, 09:39:04 PM
(https://i.imgur.com/IlFEO1T.jpg)
Post by: Ray S on September 09, 2020, 10:46:17 PM
Post by: SteveC on September 09, 2020, 11:32:50 PM
Post by: Wspeed on September 10, 2020, 02:07:21 PM
Post by: Vjeko Posavac on September 12, 2020, 03:19:50 PM
Old army bayonet for AK rifles, walnut handle, wood paint looks really good, old. Edge was chisel but I regrinde it to convex ... or chisel-vex :D
Post by: Ray S on September 24, 2020, 12:55:08 AM
This one was missing the shield when I got it and the lock didn't seem to function all the time.A little cleaning internally and the lockup problem was cured.For a replacement shield I found an old gold plated military button from a uniform and attached it with CA adhesive.
Post by: SteveC on September 24, 2020, 01:13:31 AM
Mesquite Trapper today
(https://i.imgur.com/Bq3dLme.jpg)
Post by: Wspeed on September 24, 2020, 02:19:06 PM
Post by: SteveC on October 14, 2020, 06:40:49 PM
(https://i.imgur.com/dJp54tn.jpg)
Post by: derekmac on October 14, 2020, 07:33:37 PM
Post by: David on October 14, 2020, 10:57:46 PM
Desert Ironwood and Cocobolo
Post by: SteveC on October 14, 2020, 11:39:30 PM
Post by: Ray S on October 15, 2020, 03:27:00 AM
#1 American Knife Co. Plymouth CT with brass ruler for a secondary blade ca.1875
#2 American Shear & Knife Co.
#3 Camillus 3 line easy open ca.1915
#4 Excelsior Knife Co.1880-1884
Post by: Ray S on October 15, 2020, 03:29:42 AM
#1 Fletcher Hardware Detroit Michigan ca.1912
#2 Holley Knife Co. Lakeville CT pre-1900.
#3 Keen Kutter dogleg jack
#4 Ulster sleevebard jack
Post by: Ray S on October 15, 2020, 03:31:32 AM
#1 Walden Knife Co.
#2 Waterville Cutlery Co. CT
Post by: SteveC on October 15, 2020, 03:37:36 AM
Post by: David on October 15, 2020, 04:25:24 AM
Some black beauties, especially that Ulster :dd:
:iagree:
Post by: David on October 21, 2020, 06:53:46 PM
Post by: SteveC on October 21, 2020, 07:09:02 PM
A couple of Black Beauties of my own :D
(https://i.imgur.com/iHi4MfG.jpg)
Post by: David on October 21, 2020, 09:42:02 PM
Post by: Ray S on October 28, 2020, 06:53:48 AM
A much modified Carrier Cutlery Co. Wharncliffe.
A Cattaraugus floating fish knife.
A Cattartaugus whittler.
A John Copley pruner
Post by: SteveC on October 28, 2020, 01:00:59 PM
Post by: David on October 28, 2020, 02:02:41 PM
Post by: Ray S on October 28, 2020, 05:14:22 PM
Nice indeed. Espically the Cattartaugus whittler. :tu: :like:
That was a recent acquisition from an estate sale.There were quite a few knives at the sale and there were two of the Catt whittlers;one of which had been considerably sharpened.This one almost looked like a spare and showed little evidence of ever seeing a stone.
Post by: David on October 28, 2020, 06:52:29 PM
That was a recent acquisition from an estate sale.There were quite a few knives at the sale and there were two of the Catt whittlers;one of which had been considerably sharpened.This one almost looked like a spare and showed little evidence of ever seeing a stone.
It sure is nice! Glad you were able to score it :like: :tu:
Post by: David on October 28, 2020, 06:56:01 PM
Post by: SteveC on October 28, 2020, 07:40:48 PM
(https://i.imgur.com/Ji7z2Hn.jpg)
Post by: Sam Lim on October 29, 2020, 05:42:28 AM
Post by: David on October 29, 2020, 10:52:57 AM
Post by: SteveC on October 29, 2020, 12:53:29 PM
Virgin post in this section.. Handle was literally set on fire and brushed with wire brush.
Cool knife Sam ! :like:
Post by: Ray S on November 04, 2020, 03:31:28 PM
Boker for 2
Post by: SteveC on November 04, 2020, 05:38:41 PM
Post by: SteveC on November 04, 2020, 09:01:38 PM
Bloodwood
(https://i.imgur.com/l84wwq3.jpg)
Post by: David on November 04, 2020, 10:47:02 PM
Post by: David on November 04, 2020, 10:50:46 PM
Post by: SteveC on November 04, 2020, 11:32:51 PM
Post by: SteveC on November 11, 2020, 09:36:41 PM
(https://i.imgur.com/Yg0KN80.jpg)
Post by: David on November 11, 2020, 11:03:47 PM
Post by: David on November 11, 2020, 11:05:12 PM
Mesquite
(https://i.imgur.com/Yg0KN80.jpg)
That Mesquite sure is nice! :drool: :like:
Post by: SteveC on November 11, 2020, 11:33:22 PM
Desert Ironwood
As is your DIW ! :dd:
Post by: Sos24 on November 12, 2020, 01:11:43 AM
That Mesquite sure is nice! :drool: :like::agree:
Compact with Birdseye Maple
(https://uploads.tapatalk-cdn.com/20201112/f11441be98f89d59320af5eb08c37bc2.jpg)
Post by: SteveC on November 12, 2020, 01:13:34 AM
Post by: David on November 12, 2020, 01:19:05 AM
Lovely knife Sherry ! :like: :tu:
:iagree:
Post by: SteveC on November 18, 2020, 05:28:41 PM
(https://i.imgur.com/9q0SpLy.jpg)
(https://i.imgur.com/iHFGGzl.jpg)
Post by: FolderBeholder on November 18, 2020, 05:32:33 PM
Cocobolo x 2 for WHW !Very attractive Cocobolo, SteveC! :like:
(https://i.imgur.com/9q0SpLy.jpg)
(https://i.imgur.com/iHFGGzl.jpg)
Post by: SteveC on November 18, 2020, 06:01:44 PM
Post by: VICMAN on November 18, 2020, 06:41:14 PM
Cocobolo x 2 for WHW !
Beautiful knives Steve! :like: :tu: :tu:
Post by: SteveC on November 18, 2020, 07:49:48 PM
Post by: David on November 19, 2020, 12:06:50 AM
Post by: David on November 19, 2020, 12:10:46 AM
Post by: SteveC on November 19, 2020, 12:13:03 AM
Post by: Ray S on November 19, 2020, 06:26:23 PM
#1 Two blade with curved stamp on pen blade circa 1915.
#2 Red Cross knife issued to US troops in World War One circa 1918.
#3 Easy open circa early 1920's.Left as found.Blades were damaged but unsharpened.
#4 Sailors' knife USCG approved circa 1944.Handles are jigged to look like bone.
Post by: David on November 25, 2020, 10:29:46 PM
Post by: SteveC on November 25, 2020, 10:36:24 PM
Ironwood for me also for WHW :tu:
(https://i.imgur.com/dGYpCLd.jpg)
Post by: David on November 25, 2020, 11:37:37 PM
A couple of beauties ! :like:
Ironwood for me also for WHW :tu:
(https://i.imgur.com/dGYpCLd.jpg)
[/quote
That's a very nice one! :like:
Post by: Borg on December 02, 2020, 08:10:43 PM
(https://live.staticflickr.com/65535/50672187608_ba03dd9ec4_z.jpg)
Post by: SteveC on December 02, 2020, 09:48:02 PM
Post by: SteveC on December 02, 2020, 09:52:03 PM
(https://i.imgur.com/LQ2546X.jpg)
Post by: David on December 02, 2020, 10:16:40 PM
Post by: David on December 02, 2020, 10:20:48 PM
Post by: SteveC on December 02, 2020, 10:32:26 PM
Post by: SteveC on December 09, 2020, 07:52:54 PM
(https://i.imgur.com/Lnapt6p.jpg)
Post by: David on December 09, 2020, 09:59:37 PM
Post by: Borg on December 09, 2020, 11:42:55 PM
Nice pic Steve, love the blade on the top one :tu:
Mercator today
(https://live.staticflickr.com/65535/50700267801_0092aeb351_z.jpg)
Post by: SteveC on December 09, 2020, 11:46:14 PM
Case walnut
:like:
Thanks Borg and nice one ! :cheers:
Post by: Ray S on December 10, 2020, 12:32:12 AM
Post by: Ray S on December 10, 2020, 12:33:11 AM
Post by: Ray S on December 10, 2020, 12:34:10 AM
Post by: David on December 10, 2020, 01:22:07 AM
Post by: SteveC on December 16, 2020, 06:51:35 PM
(https://i.imgur.com/WraUQhB.jpg)
Post by: David on December 17, 2020, 12:00:00 AM
Desert Ironwood for WHW
Post by: Ray S on December 17, 2020, 01:59:38 AM
#1 Hoffritz Germany gardener's knife with folding pruning shears.
#2 R.Klaas small sodbuster.
#3 Unmarked folder with tapered nail nick.
#4 Stainless Steel Brazil large folder.
Post by: Ray S on December 17, 2020, 02:01:40 AM
One is marked Imperial Pro-Hunter;the other Imperial Wildcat Skinner.
Post by: David on December 17, 2020, 02:45:35 AM
Post by: SteveC on December 17, 2020, 03:34:26 AM
Thats such a nice Remington! Really like how the long pull comes back into the tang. :tu: :like:
Desert Ironwood for WHW
Looking good ! :like:
Post by: SteveC on December 23, 2020, 08:57:27 PM
(https://i.imgur.com/FGl0naN.jpg)
Post by: David on December 24, 2020, 12:45:50 AM
Cocobolo and Ebony for WHW !
(https://i.imgur.com/FGl0naN.jpg)
Great wood covers on those two! :like:
Post by: David on December 24, 2020, 12:48:46 AM
Post by: SteveC on December 30, 2020, 05:15:56 PM
Post by: SteveC on December 30, 2020, 05:16:47 PM
Mesquite and Macadamia
(https://i.imgur.com/xwLvTxR.jpg)
Post by: David on December 31, 2020, 12:24:14 AM
Post by: David on December 31, 2020, 12:30:01 AM
Post by: Poncho65 on December 31, 2020, 04:14:23 AM
(https://i.imgur.com/38PvWwZh.jpg)
Post by: SteveC on December 31, 2020, 05:42:47 AM
Post by: SteveC on January 06, 2021, 06:21:53 PM
BF GEC 86 Sailors knife in African Blackwood
(https://i.imgur.com/U3cjx7b.jpg)
Post by: David on January 06, 2021, 10:43:03 PM
Post by: David on January 06, 2021, 10:47:47 PM
Post by: SteveC on January 07, 2021, 12:27:26 AM
Post by: SteveC on January 13, 2021, 05:51:06 PM
Macadamia wood
(https://i.imgur.com/E8bbxbe.jpg)
Post by: Borg on January 13, 2021, 07:48:14 PM
Post by: SteveC on January 13, 2021, 07:54:47 PM
Post by: SteveC on January 20, 2021, 10:47:57 PM
(https://i.imgur.com/039Fbc2.jpg)
Post by: David on January 20, 2021, 11:37:00 PM
Post by: David on January 20, 2021, 11:38:41 PM
Post by: SteveC on January 27, 2021, 08:28:25 PM
Walnut for WHW!
Nice ! :like:
Post by: SteveC on January 27, 2021, 08:29:12 PM
(https://i.imgur.com/SjI42Gy.jpg)
Post by: David on January 27, 2021, 10:07:21 PM
Post by: David on January 27, 2021, 10:08:46 PM
Post by: SteveC on January 27, 2021, 10:32:04 PM
Post by: David on February 03, 2021, 10:14:50 PM
Post by: SteveC on February 03, 2021, 10:22:55 PM
Osage Orange & Walnut for WHW
Nice ones for WHW !
Post by: SteveC on February 03, 2021, 10:23:17 PM
(https://i.imgur.com/ZDYdyzD.jpg)
Post by: David on February 03, 2021, 11:42:01 PM
Post by: SteveC on February 10, 2021, 04:50:03 PM
:woohoo: It's WHW once again :tu:
Osage Orange wood or sometimes called Hedge Apple
(https://i.imgur.com/FSbOR2n.jpg)
Post by: David on February 13, 2021, 12:07:41 AM
Post by: SteveC on February 13, 2021, 01:20:06 AM
Post by: David on February 13, 2021, 01:24:37 AM
Post by: SteveC on February 17, 2021, 05:03:57 PM
(https://i.imgur.com/UDWh3es.jpg)
Post by: David on February 17, 2021, 11:02:37 PM
Post by: David on February 17, 2021, 11:03:46 PM
Post by: Poncho65 on February 17, 2021, 11:14:32 PM
(https://i.imgur.com/SpEJndCh.jpg)
Post by: Poncho65 on February 17, 2021, 11:16:08 PM
Post by: SteveC on February 18, 2021, 01:40:12 AM
Desert Ironwood and Cocobolo
Oh my ! :dd:
Post by: Sos24 on February 18, 2021, 02:06:01 AM
Post by: David on February 18, 2021, 02:10:14 AM
Guess my Opie No 8 can count in with WHW :woohoo:
(https://i.imgur.com/SpEJndCh.jpg)
:tu: :like:
Post by: SteveC on February 24, 2021, 06:23:04 PM
(https://i.imgur.com/dancUX2.jpg)
Post by: ElevenBlade on February 24, 2021, 09:07:58 PM
Walnut for WHW !
(https://i.imgur.com/dancUX2.jpg)
A pen blade and a long pull on a clip blade :drool:
Post by: David on February 24, 2021, 10:26:05 PM
Post by: David on February 24, 2021, 10:29:03 PM
Post by: SteveC on February 24, 2021, 10:38:22 PM
Post by: McStitchy on February 24, 2021, 11:10:23 PM
Walnut for WHW !
(https://i.imgur.com/dancUX2.jpg)
Very nice knife and pattern Steve :like:
Post by: McStitchy on February 24, 2021, 11:13:18 PM
Arizona Iron Wood
They took the ironwood from the right piece David :like:
Post by: McStitchy on February 24, 2021, 11:15:24 PM
Post by: SteveC on February 24, 2021, 11:24:13 PM
Post by: McStitchy on February 24, 2021, 11:25:29 PM
Post by: David on February 25, 2021, 01:05:05 AM
Does Cocobolo Dymondwood count for WHW? :hatsoff:
Sweet! :tu:
Post by: McStitchy on February 25, 2021, 01:19:16 AM
Post by: SteveC on March 03, 2021, 06:00:54 PM
(https://i.imgur.com/RYZxCHr.jpg)
Post by: Aloha on March 03, 2021, 08:11:00 PM
Post by: McStitchy on March 03, 2021, 08:13:03 PM
Post by: Aloha on March 03, 2021, 08:17:36 PM
Post by: David on March 03, 2021, 10:25:43 PM
Post by: David on March 03, 2021, 10:29:46 PM
Post by: McStitchy on March 03, 2021, 11:07:34 PM
Osage Orange and Cocobolo
(https://media3.giphy.com/media/l0MYziGczQ3xenGaA/giphy.gif)
Post by: SteveC on March 03, 2021, 11:33:33 PM
Is that Osage Orange Steve?
Yes indeed !
Post by: SteveC on March 03, 2021, 11:33:50 PM
Osage Orange and Cocobolo
:like: :tu:
Post by: toolguy on March 04, 2021, 02:08:29 AM
It's a nickel silver frame with an S30V blade and Crelicam Ebony handles.
Post by: McStitchy on March 04, 2021, 08:32:01 AM
Post by: David on March 04, 2021, 11:52:23 AM
This is another limited run by Buck.I found this for sale and bought it even though I already had one.
It's a nickel silver frame with an S30V blade and Crelicam Ebony handles.
Verah sweet! :tu:
Post by: SteveC on March 04, 2021, 02:20:57 PM
Post by: Aloha on March 04, 2021, 04:30:47 PM
Post by: Aloha on March 04, 2021, 04:31:19 PM
Osage Orange and Cocobolo
Doesnt get any better :dd:
Post by: SteveC on March 10, 2021, 03:43:12 PM
Bloodwood and Dymondwood
(https://i.imgur.com/qWm4MPx.jpg)
Post by: David on March 10, 2021, 11:20:46 PM
Huckleberry with Cocobola covers.
Post by: SteveC on March 11, 2021, 01:08:38 AM
Post by: Doc on March 17, 2021, 12:07:01 AM
Post by: SteveC on March 17, 2021, 12:13:54 AM
I got the shipped notification this morning for a Winkler Operator, sporting maple I ordered yesterday. I am so pumped I didn’t want to wait until Friday to post a pic.
Like this ?
(https://s.yimg.com/aah/knifeart/winkler-knives-operator-caswell-finish-maple-handle-brown-leather-sheath-95.jpg)
Sweet looking blade, congrats !
Post by: Doc on March 17, 2021, 01:59:33 AM
Like this ?
(https://s.yimg.com/aah/knifeart/winkler-knives-operator-caswell-finish-maple-handle-brown-leather-sheath-95.jpg)
Sweet looking blade, congrats !
Exactly!
Post by: David on March 17, 2021, 03:25:57 AM
Exactly!
:tu:
Post by: SteveC on March 17, 2021, 05:12:31 PM
(https://i.imgur.com/oWUVSHJ.jpg)
Post by: David on March 17, 2021, 10:45:41 PM
Post by: David on March 17, 2021, 10:48:02 PM
Post by: SteveC on March 18, 2021, 04:36:19 AM
Post by: McStitchy on March 24, 2021, 05:18:15 PM
(https://i.imgur.com/qKZz2NQ.jpg)
Post by: Borg on March 24, 2021, 07:38:02 PM
When you see it...
(https://live.staticflickr.com/65535/51068405818_8dc71a2a7a_z.jpg)
And if you don't as your eyes are as bad as mine, heres a clue..
Show content
(https://live.staticflickr.com/4788/25921346437_e5530a34a0_z.jpg)
Post by: McStitchy on March 24, 2021, 07:42:53 PM
Post by: SteveC on March 24, 2021, 08:18:05 PM
Happy WHW :hatsoff:
(https://i.imgur.com/qKZz2NQ.jpg)
Nice !
Post by: SteveC on March 24, 2021, 08:18:30 PM
:like:
When you see it...
(https://live.staticflickr.com/65535/51068405818_8dc71a2a7a_z.jpg)
And if you don't as your eyes are as bad as mine, heres a clue..Show content(https://live.staticflickr.com/4788/25921346437_e5530a34a0_z.jpg)
Cool pic !
Post by: McStitchy on March 24, 2021, 08:28:52 PM
Nice !
:cheers: Steve
Post by: David on March 24, 2021, 09:04:52 PM
Post by: SteveC on March 24, 2021, 09:35:02 PM
Post by: SteveC on March 24, 2021, 09:35:38 PM
(https://i.imgur.com/7umHEL1.jpg)
Post by: McStitchy on March 24, 2021, 10:07:43 PM
Desert Ironwood and some Osage Orange or as we call it around these parts Hedge.
I'm digging the ironwood David :like: :like:
Post by: McStitchy on March 24, 2021, 10:08:54 PM
Rosewood and Bloodwood
(https://i.imgur.com/7umHEL1.jpg)
Very nice pair there Steve :drool:
Post by: McStitchy on March 24, 2021, 10:09:51 PM
Nice !
:cheers: Steve
(https://i.imgur.com/NTnSb3I.jpg)
Post by: David on March 24, 2021, 10:48:52 PM
Post by: McStitchy on March 24, 2021, 11:40:43 PM
Post by: SteveC on March 25, 2021, 12:15:28 AM
Post by: Sos24 on March 25, 2021, 01:29:08 AM
He he, toadally invisible... cannot see a thing :like::rofl:
Nice pic borg
Post by: Sos24 on March 25, 2021, 01:31:27 AM
Nice pic of your Buck McStitchy
Post by: Ray S on March 25, 2021, 04:20:57 AM
Both of these were gifted to me by a very good friend years apart.The first one I got recently from him and was made by a friend of his.The other was one he bought years ago that was made of ebony and cost about $60 then.
Post by: McStitchy on March 25, 2021, 08:54:41 AM
Nice pairs David and Steve
Nice pic of your Buck McStitchy
Thanks Sherry :hatsoff:
Post by: McStitchy on March 25, 2021, 08:55:36 AM
Well they ARE wood handles! :D
Both of these were gifted to me by a very good friend years apart.The first one I got recently from him and was made by a friend of his.The other was one he bought years ago that was made of ebony and cost about $60 then.
There should be more wooden pens in this world :like:
Post by: David on March 25, 2021, 10:44:34 AM
Post by: SteveC on March 31, 2021, 10:31:05 PM
Mesquite and Cocobolo
(https://i.imgur.com/Z1MZjvc.jpg)
Post by: Sos24 on April 01, 2021, 12:29:04 AM
I did a Cherry Wood Beaver Tail
(https://uploads.tapatalk-cdn.com/20210331/2781d1237dd5916c322a6e8ddedf4b6b.jpg)
Post by: comis on April 01, 2021, 12:35:23 AM
:woohoo: it's WHW !Lovely!
Mesquite and Cocobolo
(https://i.imgur.com/Z1MZjvc.jpg)
Post by: comis on April 01, 2021, 12:37:36 AM
Nice pair Steve.That's awesome! Is this the first GEC? How'd you like it?
I did a Cherry Wood Beaver Tail
(https://uploads.tapatalk-cdn.com/20210331/2781d1237dd5916c322a6e8ddedf4b6b.jpg)
Post by: David on April 01, 2021, 01:10:00 AM
:woohoo: it's WHW !
Mesquite and Cocobolo
(https://i.imgur.com/Z1MZjvc.jpg)
Great pair for WHW! :like:
Nice pair Steve.
I did a Cherry Wood Beaver Tail
(https://uploads.tapatalk-cdn.com/20210331/2781d1237dd5916c322a6e8ddedf4b6b.jpg)
Verah nice Trapper for WHW! :like:
Post by: David on April 01, 2021, 01:12:46 AM
Post by: SteveC on April 01, 2021, 05:40:15 AM
Post by: SteveC on April 01, 2021, 05:40:32 AM
Nice pair Steve.
I did a Cherry Wood Beaver Tail
(https://uploads.tapatalk-cdn.com/20210331/2781d1237dd5916c322a6e8ddedf4b6b.jpg)
Nice pic Sherry !
Post by: Sos24 on April 01, 2021, 05:45:31 AM
That's awesome! Is this the first GEC? How'd you like it?Thanks. It was my first GEC, but now thanks to Steve I also have a 92. I really like the trapper format, but to me this one is a little big for carrying in a pocket. I sometimes carry bigger knives, but they have pocket clips. As far as traditional knives 3-4in closed is usually my sweet spot.
Post by: SteveC on April 07, 2021, 10:19:16 PM
Post by: David on April 07, 2021, 10:23:00 PM
Post by: SteveC on April 07, 2021, 10:25:03 PM
Good wood for WHW . The 29 is getting a nice patina on it. :tu: :like:
Thanks, used it to cut up some strawberries and a Kiwi :tu:
Post by: McStitchy on April 07, 2021, 10:33:35 PM
(https://i.imgur.com/QOkwL74.jpg)
That 110 is a gem Steve :dd:
Had mine on a hike today (Rosewood Dymondwood)...
(https://i.imgur.com/ooo37Hy.jpg)
Post by: David on April 07, 2021, 10:44:00 PM
Post by: SteveC on April 07, 2021, 10:51:53 PM
That 110 is a gem Steve :dd:
Had mine on a hike today (Rosewood Dymondwood)...
(https://i.imgur.com/ooo37Hy.jpg)
Nice pic ! :like:
:)
Sweet whittler :tu:
Post by: McStitchy on April 08, 2021, 09:48:33 AM
Sweet whittler :tu:
:iagree: :like:
Post by: SteveC on April 14, 2021, 11:45:45 PM
(https://i.imgur.com/D2UlZC1.jpg)
(https://i.imgur.com/8WWouLd.jpg)
Post by: David on April 15, 2021, 12:24:00 AM
Post by: SteveC on April 21, 2021, 08:04:53 PM
It's WHW !
Bloodwood
(https://i.imgur.com/63Z4Teg.jpg)
Post by: David on April 21, 2021, 10:47:02 PM
Post by: David on April 21, 2021, 10:47:51 PM
Post by: Ray S on April 21, 2021, 11:00:41 PM
Post by: SteveC on April 21, 2021, 11:38:16 PM
Post by: SteveC on April 21, 2021, 11:38:42 PM
Cocobolo
Lovely grain on your Boys knife ! :like:
Post by: Ray S on April 22, 2021, 05:01:38 AM
Good to see you back Ray ! :cheers:Not really back;just perusing the site.The only knives I have left are my grandfather's pocket knife;a knife my dad made when he was in the navy in the early 1920's and my first knife.
Post by: SteveC on April 28, 2021, 09:59:05 PM
Ebony and Macadamia wood
(https://i.imgur.com/pUNQ2hi.jpg)
Post by: Ray S on April 29, 2021, 12:28:22 AM
Post by: SteveC on April 29, 2021, 01:36:48 AM
Post by: David on April 29, 2021, 01:44:52 AM
:woohoo: it's WHW !
Ebony and Macadamia wood
(https://i.imgur.com/pUNQ2hi.jpg)
Beautiful wood! :like:
Schrade+ Uncle Henry LB-1 Background is 1 inch(25.4mm)squares.
Ray :tu:
Post by: David on April 29, 2021, 01:46:46 AM
Post by: SteveC on April 29, 2021, 03:44:04 AM
Post by: Wspeed on April 29, 2021, 02:58:02 PM
I totally forgot about this thread :facepalm:
Post by: SteveC on May 05, 2021, 10:47:40 PM
(https://i.imgur.com/T918kZI.jpg)
Post by: Sos24 on May 06, 2021, 01:12:47 AM
Schrade+ Uncle Henry LB-1 Background is 1 inch(25.4mm)squares.Very nice Schrade
Osage OrangeSharp looking Barlow
Osage Orange and Che Chen RosewoodVery nice, especially that Rosewood.
(https://i.imgur.com/T918kZI.jpg)
Post by: David on May 06, 2021, 01:14:41 AM
Osage Orange and Che Chen Rosewood
(https://i.imgur.com/T918kZI.jpg)
Sweet wood buddy! 8)
Post by: SteveC on May 06, 2021, 01:19:51 AM
Post by: Wspeed on May 06, 2021, 03:06:49 PM
Post by: SteveC on May 12, 2021, 09:51:18 PM
(https://i.imgur.com/v0RXxUN.jpg)
Post by: David on May 13, 2021, 02:04:46 AM
Bloodwood
(https://i.imgur.com/v0RXxUN.jpg)
Nice one for WHW buddy! :like:
I'm guessing cocobolo on these two oldies.
Post by: SteveC on May 13, 2021, 03:00:24 AM
Post by: Wspeed on May 13, 2021, 03:38:29 PM
Post by: David on May 19, 2021, 10:23:52 PM
Katalox and Cocobolo
Post by: SteveC on May 19, 2021, 11:26:53 PM
Post by: SteveC on May 19, 2021, 11:27:26 PM
(https://i.imgur.com/TaLRVie.jpg)
Post by: NutSAK on May 19, 2021, 11:31:56 PM
(https://live.staticflickr.com/65535/51188791232_07e8e80d03_b.jpg)
Post by: SteveC on May 20, 2021, 01:20:27 AM
Post by: David on May 20, 2021, 01:40:15 AM
Macadamia and Cocobolo
(https://i.imgur.com/TaLRVie.jpg)
Good looking wood for WHW! :like:
Walnut
(https://live.staticflickr.com/65535/51188791232_07e8e80d03_b.jpg)
Nice Walnut covers Terry!
Post by: Wspeed on May 20, 2021, 03:26:33 PM
Post by: SteveC on May 26, 2021, 07:48:06 PM
(https://i.imgur.com/gf6IlIO.jpg)
Post by: David on May 26, 2021, 10:26:40 PM
Post by: SteveC on May 26, 2021, 11:58:51 PM
Post by: David on May 27, 2021, 02:15:43 AM
Post by: SteveC on May 27, 2021, 05:41:50 AM
Post by: Ray S on June 02, 2021, 06:48:55 AM
Imperials aplenty.
#1 Five blade Official scout knife.
#2 a shell handled scout/utility re-handled in wood.
#3 Imperial Pro-Hunter.
#4 Imperial Wildcat Skinner. Same as number 3 but with a different etch.
Post by: SteveC on June 02, 2021, 01:42:38 PM
Post by: David on June 02, 2021, 03:25:53 PM
Nice Scout ! :like:
:iagree:
Post by: SteveC on June 02, 2021, 08:59:43 PM
(https://i.imgur.com/I9v4ibx.jpg)
Post by: David on June 02, 2021, 10:00:22 PM
Post by: David on June 02, 2021, 10:02:01 PM
Post by: SteveC on June 02, 2021, 10:58:38 PM
Post by: SteveC on June 08, 2021, 04:28:24 PM
Osage Orange and Rosewood
(https://i.imgur.com/gkgFdBg.jpg)
Post by: Poncho65 on June 08, 2021, 07:22:19 PM
(https://pics.me.me/that-moment-you-realize-you-were-a-day-a-head-its-5028897.png)
:rofl:
Post by: David on June 08, 2021, 09:20:01 PM
Post by: SteveC on June 09, 2021, 05:43:22 AM
Post by: Ray S on June 09, 2021, 07:51:24 AM
#1 A utility knife stamped Dan C. Laub Minneapolis Minn. The blade is sharp on one side and has a replaceable two edged small blade(also very sharp)on the other. Not sure of it's exact function;someone thought it might be a linoleum knife but the blade shape is wrong.If anyone knows what it was designed to do,I would appreciate the info.
#2 Made by the Hyde Mfg. Co. of Southbridge Mass.it is an early style utility knife that had a wide range of blade shapes.The handle unscrews to loosen the jaws allowing the blade to be replaced.I had several of these by various makers that also had handmade blades constructed of ground down hacksaw blade pieces.One of them was a set made by my ex-wife's grandfather who was a cobbler and used custom made blades to cut shoe leather.
#3 Another Hyde knife but this one is I believe used to cut linoleum or rugs.The blade is two sided and easily replaced.
#4 An early style utility knife using single edged razor blades. No maker's name.
Post by: SteveC on June 09, 2021, 01:37:54 PM
Post by: SteveC on June 09, 2021, 09:17:13 PM
(https://i.imgur.com/OnxyBNf.jpg)
Post by: David on June 09, 2021, 10:07:40 PM
Post by: David on June 09, 2021, 10:11:51 PM
Post by: SteveC on June 09, 2021, 10:39:41 PM
Post by: SteveC on June 09, 2021, 11:17:44 PM
Post by: SteveC on June 16, 2021, 08:16:38 PM
IT's WHW !
Mesquite and Bloodwood
(https://i.imgur.com/3p0LX1N.jpg)
Post by: David on June 16, 2021, 09:37:12 PM
Post by: NutSAK on June 16, 2021, 09:45:05 PM
Post by: David on June 16, 2021, 10:15:28 PM
(https://live.staticflickr.com/65535/51251488971_ec08c169a1_h.jpg)
:tu:
Post by: David on June 16, 2021, 10:16:46 PM
Post by: SteveC on June 16, 2021, 10:23:38 PM
Post by: Ray S on June 17, 2021, 01:16:06 AM
#1 George Cousino Onsted Michigan drop point hunter;a gift from my kids one Christmas.
#2 James B.Lile drop point hunter #333 of 500 for the Duxbak Co.
#3 Unmarked custom that was unfinished when I got it.Shape is weird but comfortable to hold either blade up or down.
#4 Ithaca Gun Works Track folder.
Post by: Ray S on June 17, 2021, 01:20:09 AM
#1 Marked only on the sheath(DFN);looks like oak with a plexiglass spacer in the middle.
#2 Hand made kitchen knife set bought for $2.50.
#3 Fillet knife by J.I.Cottrill Columbus Ohio
#4 handmade dagger with checkered handle
Post by: Ray S on June 17, 2021, 01:23:18 AM
#1 Ken Largin(Kelgin Knives)balisong.
#2 Unmarked folder with bevel edge bolsters/handles(1 pin only)and convex blade grind.
#3 & #4 pair of unmarked hunters with wooden sheaths.
Post by: David on June 17, 2021, 06:00:43 PM
Post by: SteveC on June 17, 2021, 06:28:44 PM
Post by: SteveC on June 23, 2021, 08:12:56 PM
(https://i.imgur.com/urMyWrC.jpg)
Post by: Ray S on June 23, 2021, 09:03:24 PM
Post by: Sos24 on June 23, 2021, 09:40:11 PM
Bloodwood and Sucker RodVery interesting color on that Sucker Rod
Post by: Sos24 on June 23, 2021, 09:40:33 PM
Chechen RosewoodNice grain to that Rosewood.
(https://i.imgur.com/urMyWrC.jpg)
Post by: Sos24 on June 23, 2021, 09:41:54 PM
Last few:You have several beauties. That balisong is very unique looking.
#1 Ken Largin(Kelgin Knives)balisong.
#2 Unmarked folder with bevel edge bolsters/handles(1 pin only)and convex blade grind.
#3 & #4 pair of unmarked hunters with wooden sheaths.
Post by: David on June 24, 2021, 12:24:45 AM
Chechen Rosewood
(https://i.imgur.com/urMyWrC.jpg)
Verah nice Rosewood! :like:
Post by: David on June 24, 2021, 12:34:46 AM
Post by: SteveC on June 24, 2021, 05:40:25 AM
Post by: Vjeko Posavac on June 24, 2021, 07:14:26 PM
It's supposedly old WW1 bayonet that my great grandfather convert in to EDC for around the house.
Post by: David on June 24, 2021, 09:34:51 PM
Post by: Ray S on June 30, 2021, 08:14:02 PM
Giant economy size stiletto.
Post by: SteveC on June 30, 2021, 09:04:32 PM
Post by: SteveC on June 30, 2021, 09:04:56 PM
(https://i.imgur.com/EzDRgZy.jpg)
Post by: David on June 30, 2021, 10:19:00 PM
Post by: David on June 30, 2021, 10:20:46 PM
Post by: SteveC on June 30, 2021, 11:04:10 PM
Post by: Barry Rowland on July 01, 2021, 12:19:07 AM
Post by: SteveC on July 01, 2021, 12:19:44 AM
Post by: Barry Rowland on July 01, 2021, 02:17:13 AM
Post by: David on July 01, 2021, 03:00:43 AM
The '21 Tour de France from Opinel :D
Barry :tu:
Post by: Ray S on July 01, 2021, 06:47:59 PM
The '21 Tour de France from Opinel :D
Nice one Barry! I wasn't aware that Opinel made commemorative knives.I learned something today!
Post by: SteveC on July 07, 2021, 09:15:37 PM
(https://i.imgur.com/1ag4dHz.jpg)
Post by: Ray S on July 07, 2021, 10:50:23 PM
Post by: David on July 07, 2021, 11:34:46 PM
Mustang with Desert Ironwood
Post by: Sos24 on July 08, 2021, 02:46:15 AM
Brazilian Cherry on Trapper
(https://uploads.tapatalk-cdn.com/20210708/0f65bd5925581e2708bd3e01b4851b86.jpg)
Post by: David on July 08, 2021, 03:40:00 AM
Happy WHW
Brazilian Cherry on Trapper
(https://uploads.tapatalk-cdn.com/20210708/0f65bd5925581e2708bd3e01b4851b86.jpg)
:tu: :like:
Post by: SteveC on July 08, 2021, 05:34:42 AM
Post by: SteveC on July 14, 2021, 06:24:02 PM
Cocobolo and Macadamia wood
(https://i.imgur.com/caouMcI.jpg)
Post by: toolguy on July 14, 2021, 10:44:38 PM
The first two pics are a 3" Skinner with a handle of Cocobolo.
The second two are made from desert Ironwood and is a 4" Drop Point Hunter.
Post by: NutSAK on July 14, 2021, 10:53:45 PM
(https://live.staticflickr.com/65535/51310770547_995c2ee5cc_h.jpg)[/url]
Post by: SteveC on July 14, 2021, 10:58:46 PM
Post by: toolguy on July 14, 2021, 11:01:39 PM
Happy WHW! :cheers:
(https://live.staticflickr.com/65535/51310770547_995c2ee5cc_h.jpg)[/url]
What type of wood is this Queen?
Post by: NutSAK on July 14, 2021, 11:04:50 PM
That ironwood is sure beautiful toolguy!
Post by: toolguy on July 14, 2021, 11:16:10 PM
Cocobolo. It's very dark, so hard to get good lighting for a photo of the grain.
That ironwood is sure beautiful toolguy!
Boy,that sure is dark for Cocobolo.I thought it may be Ebony.
Thanks NS.
The Ironwood on this Boye has some nice chatoyance,which I haven't fully captured.I bought this knife from David in 1986 and God only knows the actual age of the wood.
Post by: NutSAK on July 14, 2021, 11:53:24 PM
(https://live.staticflickr.com/65535/51311111282_9efc9ac7ce_h.jpg)
Post by: toolguy on July 15, 2021, 12:54:42 AM
I have a Queen birds-eye maple 2 blade large fording hunter and it is some really weird looking wood.LOL
Post by: Ray S on July 15, 2021, 01:45:48 AM
A Boker lock back and a 2020 GS.The latter came in the box with sheath for $15!
Post by: SteveC on July 15, 2021, 01:59:33 AM
Post by: NutSAK on July 15, 2021, 02:16:21 AM
Nice!
I have a Queen birds-eye maple 2 blade large fording hunter and it is some really weird looking wood.LOL
It's about the most hard to photograph wood I've ever seen. If yours is like mine, sometimes it looks grey, sometimes it looks kinda purple depending on the lighting?
I really like it though--the figure in mine is almost 3D at times. That folding hunter is a brute!
Nice ones Ray! especially for the price. :cheers:
Post by: SteveC on July 21, 2021, 08:48:43 PM
(https://i.imgur.com/0QrutaG.jpg)
Post by: David on July 21, 2021, 10:23:47 PM
Desert Ironwood
Post by: SteveC on July 21, 2021, 10:48:44 PM
Post by: SurgeUk on July 21, 2021, 11:13:19 PM
Just like being back in the Army, I followed the last order given :twak: :salute:
Post by: Ray S on July 22, 2021, 01:57:04 AM
Post by: SteveC on July 28, 2021, 06:32:03 PM
Good ones Ray and Surge ! :cheers:
Post by: SteveC on July 28, 2021, 06:32:14 PM
Rosewood and Mesquite
(https://i.imgur.com/b9Z5ehN.jpg)
Post by: Poncho65 on July 28, 2021, 06:48:38 PM
Post by: NutSAK on July 28, 2021, 08:41:40 PM
Happy WHW!
GEC #33 Conductor in ebony
(https://live.staticflickr.com/65535/51341470593_a0c1317295_h.jpg)
Post by: NutSAK on July 28, 2021, 08:54:37 PM
Happy WHW !
Rosewood and Mesquite
Beautiful Mesquite on that one Steve!
Post by: SteveC on July 28, 2021, 10:56:21 PM
Post by: SteveC on July 28, 2021, 10:56:53 PM
:cheers:
Happy WHW!
GEC #33 Conductor in ebony
(https://live.staticflickr.com/65535/51341470593_a0c1317295_h.jpg)
:like:
Post by: David on July 29, 2021, 12:27:47 AM
Desert Ironwood
Post by: toolguy on July 29, 2021, 01:49:28 AM
Congrats to all owners.
These are two from the same small run of 62 knives sold by Buck.I bought the first one on the Buck site and few weeks later I spotted this on the Bay for less than I paid for the first one.It took no thought to buy this second one especially for less.lol
They're 112's with S30V blades,nickel silver frames and genuine Ebony handles.
Post by: SteveC on July 29, 2021, 05:40:19 AM
Post by: SteveC on July 29, 2021, 05:40:33 AM
:woohoo: WHW! Good wood for WHW Steve and Terry! :like:
Desert Ironwood
Sweet ! :cheers:
Post by: David on July 29, 2021, 03:17:35 PM
Some really cool knives today,guys.
Congrats to all owners.
These are two from the same small run of 62 knives sold by Buck.I bought the first one on the Buck site and few weeks later I spotted this on the Bay for less than I paid for the first one.It took no thought to buy this second one especially for less.lol
They're 112's with S30V blades,nickel silver frames and genuine Ebony handles.
Really nice 112's TG! :like:
Post by: Ray S on July 29, 2021, 08:04:49 PM
Post by: Gareth on July 29, 2021, 09:02:31 PM
Post by: David on August 04, 2021, 10:01:33 PM
I really need to start posting in this thread. :D (I can never keep track of the what-to-carry-when topics though).
Yes you do. :pok: :D
Post by: David on August 04, 2021, 10:02:51 PM
Post by: SteveC on August 04, 2021, 10:30:15 PM
Post by: SteveC on August 04, 2021, 10:30:49 PM
(https://i.imgur.com/iaBSTd9.jpg)
Post by: David on August 05, 2021, 12:45:31 AM
Post by: SteveC on August 05, 2021, 01:40:35 AM
Post by: Gareth on August 05, 2021, 05:21:03 PM
Nice knives folks. :hatsoff:
Post by: Santos on August 11, 2021, 12:16:43 PM
Post by: Gareth on August 11, 2021, 12:51:17 PM
(https://forum.multitool.org/index.php?action=dlattach;topic=77905.0;attach=518493)
Post by: SteveC on August 11, 2021, 01:46:27 PM
Post by: David on August 11, 2021, 03:35:59 PM
Post by: fyrstormer on August 11, 2021, 04:19:11 PM
Stainless Damascus steel. The future is now.
Post by: SteveC on August 11, 2021, 08:35:46 PM
(https://i.imgur.com/sbdL20m.jpg)
Post by: Gareth on August 11, 2021, 09:05:33 PM
Post by: toolguy on August 11, 2021, 09:21:11 PM
The wood is Desert Ironwood.
Post by: toolguy on August 11, 2021, 09:28:29 PM
Nice Boker fyrstormer.
I really like that NF single blade Steve.That's my kind of knife.
Post by: David on August 11, 2021, 10:23:05 PM
Rosewood and Osage orange :tu:
(https://i.imgur.com/sbdL20m.jpg)
Good wood budddy! :like:
This is limited run of a Buck 112 Ranger.
The wood is Desert Ironwood.
Love Desert Ironwood! :like:
Post by: David on August 11, 2021, 10:26:46 PM
Post by: SteveC on August 11, 2021, 10:59:54 PM
This is limited run of a Buck 112 Ranger.
The wood is Desert Ironwood.
Sweet !
Post by: Santos on August 11, 2021, 11:20:08 PM
What a contrast between Santos' and Gareth's knives.LOL Good-on-yas.
Ain't purty but is wood handled ::P
Post by: NutSAK on August 12, 2021, 12:58:07 AM
Beechwood for me today.
(https://live.staticflickr.com/65535/51371660402_62f47c8ac3_h.jpg)
Post by: NutSAK on August 12, 2021, 12:59:10 AM
This is limited run of a Buck 112 Ranger.
The wood is Desert Ironwood.
:drool: drop-dead gorgeous Buck toolguy.
Post by: SteveC on August 12, 2021, 01:21:35 AM
Post by: Santos on August 17, 2021, 10:01:54 PM
6" Tramontina Rigging Knife.
Post by: Gareth on August 18, 2021, 11:32:50 AM
(https://forum.multitool.org/index.php?action=dlattach;topic=77905.0;attach=518964)
Post by: David on August 18, 2021, 11:50:49 AM
Post by: SteveC on August 18, 2021, 01:50:49 PM
Post by: SteveC on August 18, 2021, 01:51:19 PM
It is already Wednesday in Sydney, Australia.
6" Tramontina Rigging Knife.
:like: What kind of wood ?
Post by: Santos on August 18, 2021, 02:23:45 PM
:like: What kind of wood ?
I might be cynical and say unknow amazon wood but Tramontina probably is smarter about that sort of thing these days.
The knife is a cut-down factory 10" .
(https://assets.tramontina.com.br/upload/tramon/imagens/CUT/26620010PNM001G.png)
The handle was the surface charred over a gas burner stove then rubbed with coconut oil, same with the Macaquinho I posted last week
Post by: NutSAK on August 18, 2021, 04:06:44 PM
(https://live.staticflickr.com/65535/51387282575_cfb54472fe_h.jpg)
(https://live.staticflickr.com/65535/51387284710_606ab9b82d_h.jpg)
Post by: SteveC on August 18, 2021, 06:07:13 PM
Post by: David on August 18, 2021, 06:38:30 PM
Bird's eye maple
(https://live.staticflickr.com/65535/51387282575_cfb54472fe_h.jpg)
(https://live.staticflickr.com/65535/51387284710_606ab9b82d_h.jpg)
8). :like:
Post by: Gareth on August 18, 2021, 08:03:15 PM
(https://i.imgur.com/kGVFZLy.png)
8). :like::iagree:
Post by: toolguy on August 18, 2021, 08:23:55 PM
Congrats everyone.
This is a Case 54 Trapper in the rattle snake pattern,done on oak.
I can never leave a knife alone.LOL I have to remove any residual tool marks from the blade,spine and backsprings.I then feel compelled to buff those surfaces to a mirror shine.
Oh well,it's some sort of compulsion I've lived with for years,decades.
Post by: NutSAK on August 18, 2021, 09:03:35 PM
(https://i.imgur.com/kGVFZLy.png)
8). :like:
:iagree:
Thanks fellas. :hatsoff:
I've been struggling for years to take a picture of that knife that represents what it looks like in person. I don't think it will ever happen. The BEM that Queen used on these has intricate figure that is difficult to focus on and the color balance is never right. Regardless, to my eyes it is one of the prettiest scale materials I've seen.
I've not seen Case scales like you have on your trapper before TG. Very cool!! 8)
Post by: toolguy on August 18, 2021, 09:16:40 PM
Thanks fellas. :hatsoff:
I've been struggling for years to take a picture of that knife that represents what it looks like in person. I don't think it will ever happen. The BEM that Queen used on these has intricate figure that is difficult to focus on and the color balance is never right. Regardless, to my eyes it is one of the prettiest scale materials I've seen.
I've not seen Case scales like you have on your trapper before TG. Very cool!! 8)
Thanks NS.
Case has done some really crazy scales on the 54 series.
I have tortoise and alligator scales done on bone.
Post by: SteveC on August 18, 2021, 09:22:45 PM
Post by: SteveC on August 18, 2021, 09:23:13 PM
(https://i.imgur.com/9D0tHvY.jpg)
Post by: toolguy on August 18, 2021, 09:29:35 PM
Nice one TG ! :like:
Thanks Steve.
Your Northfield is a really cool knife,Congrats.
Post by: Gareth on August 18, 2021, 09:35:05 PM
Cool knives today for sure.
Congrats everyone.
This is a Case 54 Trapper in the rattle snake pattern,done on oak.
I can never leave a knife alone.LOL I have to remove any residual tool marks from the blade,spine and backsprings.I then feel compelled to buff those surfaces to a mirror shine.
Oh well,it's some sort of compulsion I've lived with for years,decades.
Never seen that rattlesnake pattern before. Love it. :tu:
Post by: Gareth on August 18, 2021, 09:35:36 PM
Cocobolo on this Oregon Trapper
(https://i.imgur.com/9D0tHvY.jpg)
:gimme:
Post by: David on August 18, 2021, 10:20:46 PM
Post by: David on August 18, 2021, 10:30:55 PM
Cool knives today for sure.
Congrats everyone.
This is a Case 54 Trapper in the rattle snake pattern,done on oak.
I can never leave a knife alone.LOL I have to remove any residual tool marks from the blade,spine and backsprings.I then feel compelled to buff those surfaces to a mirror shine.
Oh well,it's some sort of compulsion I've lived with for years,decades.
8). :like:
Cocobolo on this Oregon Trapper
(https://i.imgur.com/9D0tHvY.jpg)
Excellent Cocobolo! :tu:
Post by: SteveC on August 18, 2021, 10:42:05 PM
Cocobolo
Nice 175 ! :like:
Post by: Gareth on August 18, 2021, 10:54:11 PM
Cocobolo
Nice! 8)
Post by: Gareth on August 25, 2021, 11:43:16 AM
(https://forum.multitool.org/index.php?action=dlattach;topic=77905.0;attach=519495)
Post by: SteveC on August 25, 2021, 02:04:07 PM
Post by: SteveC on August 25, 2021, 03:10:11 PM
(https://i.imgur.com/2Bikpcx.jpg)
Post by: David on August 25, 2021, 03:23:01 PM
Boker Mini Tech Tool in Zebrawood.
(https://forum.multitool.org/index.php?action=dlattach;topic=77905.0;attach=519495)
Nice Zebrawood! :like:
Post by: David on August 25, 2021, 03:24:06 PM
Macadamia wood and Bloodwood for WW :tu:
(https://i.imgur.com/2Bikpcx.jpg)
Nice wood for WHW! :like:
Post by: NutSAK on August 25, 2021, 04:11:41 PM
(https://live.staticflickr.com/65535/51400943352_afe3ef4c6c_k.jpg)
Post by: NutSAK on August 25, 2021, 05:53:28 PM
Macadamia wood and Bloodwood for WW :tu:
(https://i.imgur.com/2Bikpcx.jpg)
Great pic and knives! I miss the lichen-covered rock I used for pics at my old property.
Post by: SteveC on August 25, 2021, 06:01:49 PM
Post by: SteveC on August 25, 2021, 06:02:15 PM
Boxwood
(https://live.staticflickr.com/65535/51400943352_afe3ef4c6c_k.jpg)
Nice !
Post by: Gareth on August 25, 2021, 08:05:40 PM
Boxwood
(https://live.staticflickr.com/65535/51400943352_afe3ef4c6c_k.jpg)
Love the boxwood! :tu:
Post by: David on August 25, 2021, 10:31:28 PM
Boxwood
(https://live.staticflickr.com/65535/51400943352_afe3ef4c6c_k.jpg)
That Boxwood looks nice! :like:
Post by: toolguy on August 26, 2021, 12:34:32 AM
Congrats to all of the owners.
This an older Buck 2 dot 112 Ranger with genuine Ebony.
The first two pictures is the condition in which I bought it.The next two are after Toolguy's spa treatment.lol
(https://forum.multitool.org/index.php?action=dlattach;topic=63570.0;attach=260248)
(https://forum.multitool.org/index.php?action=dlattach;topic=63570.0;attach=260250)
(https://forum.multitool.org/index.php?action=dlattach;topic=63570.0;attach=260927)
(https://forum.multitool.org/index.php?action=dlattach;topic=63570.0;attach=260929)
Post by: David on August 26, 2021, 01:20:20 AM
Holy Toledo,you guys really raised the bar today.
Congrats to all of the owners.
This an older Buck 2 dot 112 Ranger with genuine Ebony.
Sweet old 112 TG. You really made it look better! :tu:
Post by: David on August 26, 2021, 01:23:46 AM
Post by: SteveC on August 26, 2021, 01:51:22 AM
Post by: NutSAK on August 26, 2021, 10:10:59 AM
Holy Toledo,you guys really raised the bar today.
Congrats to all of the owners.
This an older Buck 2 dot 112 Ranger with genuine Ebony.
The first two pictures is the condition in which I bought it.The next two are after Toolguy's spa treatment.lol
Another beautiful Buck TG!! :cheers:
Post by: David on September 01, 2021, 10:12:53 PM
Post by: toolguy on September 01, 2021, 11:49:20 PM
Nice grind on that blade David.Who's the maker,I can't quite see the maker's mark.
I may have shown this one before.
It's a case '54 Trapper with dozens of very small pieces of wood used to construct this "Eagle Dancer".
PS: I don't know what type of woods were used in the construction of these handles.
Post by: SteveC on September 01, 2021, 11:50:49 PM
(https://i.imgur.com/n6KV22G.jpg)
Post by: toolguy on September 01, 2021, 11:53:31 PM
Bloodwood and Chechen Rosewood
(https://i.imgur.com/n6KV22G.jpg)
I've never heard of Chechen Rosewood.
It does have nice color and cool dark streaks.
Good-on-ya Steve.
Did I mix up the knives and their woods?
Post by: SteveC on September 02, 2021, 12:23:13 AM
I've never heard of Chechen Rosewood.
It does have nice color and cool dark streaks.
Good-on-ya Steve.
Did I mix up the knives and their woods?
You got it right :tu:
Post by: David on September 02, 2021, 12:46:10 AM
Nice grind on that blade David.Who's the maker,I can't quite see the maker's mark.
Its a Moore Maker knife made by Canal Street CO-OP in 2018 before they went under.
Post by: David on September 02, 2021, 12:51:00 AM
Bloodwood and Chechen Rosewood
(https://i.imgur.com/n6KV22G.jpg)
Verah nice wood for WHW! :like:
Post by: Santos on September 08, 2021, 03:51:39 AM
Post by: SteveC on September 08, 2021, 10:07:15 PM
Post by: SteveC on September 08, 2021, 10:07:38 PM
(https://i.imgur.com/eIYA7Wo.jpg)
Post by: toolguy on September 08, 2021, 11:09:57 PM
Ironwood x 2
(https://i.imgur.com/eIYA7Wo.jpg)
Great wood on those two Steve.
Here is a 110 from Brian Yellowhorse,son of David.
The wood is Desert Ironwood.
Post by: SteveC on September 09, 2021, 12:24:14 AM
Post by: David on September 09, 2021, 12:59:00 AM
Katalox & Bloodwood
Post by: SteveC on September 09, 2021, 01:22:58 AM
Post by: Sos24 on September 09, 2021, 02:18:11 AM
Ironwood x 2Nice color
(https://i.imgur.com/eIYA7Wo.jpg)
Love the Ironwood Steve and TG!Nice pair
Katalox & Bloodwood
Great wood on those two Steve.That Yellowhorse 110 is gorgeous.
Here is a 110 from Brian Yellowhorse,son of David.
The wood is Desert Ironwood.
Post by: Sos24 on September 09, 2021, 02:19:22 AM
Post by: SteveC on September 15, 2021, 09:08:25 PM
Post by: SteveC on September 15, 2021, 09:08:31 PM
(https://i.imgur.com/lCAtVNW.jpg)
Post by: David on September 15, 2021, 10:42:57 PM
Case Walnut
Post by: toolguy on September 15, 2021, 10:43:54 PM
That's a pretty color Sherry.
Steve that mesquite is really unique.
This a C2-V1 Buck 112 Ranger.
This is made with Shedua wood,which is indigenous to Africa.It's a close relative to Bubinga.
It also has no-nail nick 440C blade with a three line stamp.
Buck
112
USA
Post by: toolguy on September 15, 2021, 10:45:09 PM
:woohoo: WHW! Good wood Sherry and Steve! :like:
Case Walnut
Darn David,that poor thing is in need of some TLC. LOL
Post by: SteveC on September 15, 2021, 11:16:11 PM
:woohoo: WHW! Good wood Sherry and Steve! :like:
Case Walnut
Beauty as is ! :like:
Thank you gentlemen and lady.
That's a pretty color Sherry.
Steve that mesquite is really unique.
This a C2-V1 Buck 112 Ranger.
This is made with Shedua wood,which is indigenous to Africa.It's a close relative to Bubinga.
It also has no-nail nick 440C blade with a three line stamp.
Buck
112
USA
:like: :tu:
Post by: David on September 16, 2021, 01:48:38 AM
This a C2-V1 Buck 112 Ranger.
This is made with Shedua wood,which is indigenous to Africa.It's a close relative to Bubinga.
It also has no-nail nick 440C blade with a three line stamp.
Buck
112
USA
Nice early 112! :like:
Post by: Shuya on September 22, 2021, 08:26:02 AM
Laguiole En Aubrac "Lo Fau"
Handle is stabilized spalted maple wood with awesome look. Satin 12C27 Blade
Post by: David on September 22, 2021, 11:51:01 AM
Post by: SteveC on September 22, 2021, 01:29:05 PM
Post by: NutSAK on September 22, 2021, 07:31:22 PM
(https://live.staticflickr.com/65535/51502734502_e0cf640335_k.jpg)
(https://live.staticflickr.com/65535/51504248009_9271d05a9d_k.jpg)
Post by: NutSAK on September 22, 2021, 07:31:55 PM
Left my sardinian shepherds knife at home in favour for this french beaty.
Laguiole En Aubrac "Lo Fau"
Handle is stabilized spalted maple wood with awesome look. Satin 12C27 Blade
Gorgeous!
Post by: David on September 22, 2021, 07:37:29 PM
Post by: SteveC on September 22, 2021, 08:51:38 PM
Post by: SteveC on September 22, 2021, 08:51:58 PM
(https://i.imgur.com/bDIv2kM.jpg)
Post by: David on September 22, 2021, 10:47:00 PM
Post by: David on September 22, 2021, 10:48:46 PM
Post by: SteveC on September 22, 2021, 11:38:52 PM
Post by: toolguy on September 24, 2021, 11:18:25 PM
This the oldest knife,which I bought new,that I still own.
I bought it in 1971 but is was made pre-1964.
It's a Puma Model 970 Game Warden.
Post by: SteveC on September 24, 2021, 11:23:54 PM
Very nice old lockback ! :tu:
Post by: toolguy on September 24, 2021, 11:32:46 PM
Condolences tg !
Very nice old lockback ! :tu:
Thanks Steve.
I recently bought another Game Warden for a reasonable price but it needs some work.It has the most important part of the knife in very good condition,the blade.It has a 1975 production date.
Post by: David on September 25, 2021, 02:58:40 AM
I'm sorry I missed WW but I had a lot on my mind with the passing of a friend.
This the oldest knife,which I bought new,that I still own.
I bought it in 1971 but is was made pre-1964.
It's a Puma Model 970 Game Warden.
Sorry to hear your friend has passed TG.
Nice knife and glad you still have it. :tu:
Post by: toolguy on September 27, 2021, 12:36:53 AM
Sorry to hear your friend has passed TG.
Nice knife and glad you still have it. :tu:
Thanks David.
Post by: Gareth on September 27, 2021, 02:50:55 PM
Left my sardinian shepherds knife at home in favour for this french beaty.
Laguiole En Aubrac "Lo Fau"
Handle is stabilized spalted maple wood with awesome look. Satin 12C27 Blade
that's a nice variation on the classic Laguiole. :tu:
Post by: Gareth on September 27, 2021, 02:52:04 PM
I'm sorry I missed WW but I had a lot on my mind with the passing of a friend.
This the oldest knife,which I bought new,that I still own.
I bought it in 1971 but is was made pre-1964.
It's a Puma Model 970 Game Warden.
Very sorry to hear that TG. :(
Post by: toolguy on September 27, 2021, 07:29:07 PM
Very sorry to hear that TG. :(
Thanks Gareth.
I'm old school and as a result I put very little of my private life online.
Ron's death was matter of record on many knife sites because he was the founder of JerseeDevil.
He was one of the most passionate men concerning knives,firearms and personal freedoms with whom I've ever spoken.May he RIP.
Post by: Gareth on September 29, 2021, 12:40:48 PM
(https://forum.multitool.org/index.php?action=dlattach;topic=77905.0;attach=522688)
Post by: SteveC on September 29, 2021, 01:34:22 PM
Post by: Fuzzbucket on September 29, 2021, 01:39:25 PM
Post by: Gareth on September 29, 2021, 02:26:28 PM
Post by: SteveC on September 29, 2021, 02:40:46 PM
I imagine it's curly birch? :think:
Looks likely
(https://i.ytimg.com/vi/XfhEAkAb2Bk/maxresdefault.jpg)
Post by: RF52 on September 29, 2021, 03:10:47 PM
Sent fra min M2002J9G via Tapatalk
Post by: FolderBeholder on September 29, 2021, 03:15:23 PM
Post by: RF52 on September 29, 2021, 03:31:31 PM
A Helle Saga Siglar with curly burch handles.Very nice! Really like the simple, but useful design :cheers:
Sent fra min M2002J9G via Tapatalk
Post by: Gareth on September 29, 2021, 07:30:09 PM
A Helle Saga Siglar with curly burch handles.
Helle do make a good looking knife. 8)
Post by: SteveC on September 29, 2021, 07:58:39 PM
(https://i.imgur.com/LFugsJO.jpg)
Post by: David on September 29, 2021, 10:44:16 PM
Rosewood and Ebony
Post by: Gareth on September 29, 2021, 10:54:04 PM
Rosewood and Ebony
Very, very nice. :tu: I might need to add a bit of ebony to my small collection.
Post by: toolguy on September 29, 2021, 11:00:37 PM
One of David Yellowhorse's iconic designs done for Buck Knife Co.
I know there's some Desert Ironwood in here somewhere.LOL
Post by: SteveC on September 29, 2021, 11:01:41 PM
Lots of nice wood being displayed today for WHW!
Rosewood and Ebony
Nice ! and :iagree:
Post by: David on September 30, 2021, 12:55:00 AM
Post by: VICMAN on September 30, 2021, 04:09:27 PM
A Helle Saga Siglar with curly burch handles.
Very cool FB! :like: :tu: :tu:
Post by: SteveC on October 06, 2021, 09:01:17 PM
(https://i.imgur.com/prnNJMO.jpg)
Post by: David on October 06, 2021, 10:57:57 PM
Rosewood
(https://i.imgur.com/prnNJMO.jpg)
Rosewood fits right in with the fall colors! :like:
Post by: David on October 06, 2021, 11:00:01 PM
Post by: SteveC on October 06, 2021, 11:12:55 PM
Post by: Sos24 on October 07, 2021, 03:32:22 AM
Nice contributions Gareth,FB,Steve and David for todays WHW.Yellow Horse does so gorgeous work
One of David Yellowhorse's iconic designs done for Buck Knife Co.
I know there's some Desert Ironwood in here somewhere.LOL
Wood is so beautiful. Nice pairs David and Steve
Post by: Sos24 on October 07, 2021, 03:33:02 AM
(https://uploads.tapatalk-cdn.com/20211007/f675bb715dde87005d049c64823b6039.jpg)
Post by: SteveC on October 07, 2021, 05:41:15 AM
Post by: David on October 07, 2021, 11:49:08 AM
That's a beauty ! :tu:
:iagree:
Post by: Gareth on October 07, 2021, 07:23:01 PM
Rosewood
(https://i.imgur.com/prnNJMO.jpg)
those are gorgeous Steve. :drool:
Post by: SteveC on October 07, 2021, 08:21:32 PM
Post by: Deathtakeslast on October 07, 2021, 08:35:35 PM
(https://i.postimg.cc/qg6rj09Q/My-Parang-Trio-2.jpg) (https://postimg.cc/qg6rj09Q)
Post by: SteveC on October 08, 2021, 02:44:04 AM
Post by: SteveC on October 13, 2021, 08:50:05 PM
Macadamia wood
(https://i.imgur.com/B3SeFsy.jpg)
Post by: toolguy on October 13, 2021, 10:01:31 PM
It also reminded me of this Buck.
Hey Steve is that Macadamia wood as tasty as the nuts ? LOL
Post by: David on October 13, 2021, 10:08:46 PM
Post by: SteveC on October 13, 2021, 10:34:36 PM
That Birdseye Maple is very cool and a lifetime handle that won't wear like Cellidor.Good one SOS.
It also reminded me of this Buck.
Hey Steve is that Macadamia wood as tasty as the nuts ? LOL
:D
Another nice Buck ! :tu:
Post by: David on October 14, 2021, 12:15:08 AM
:woohoo: Its WHW !
Macadamia wood
(https://i.imgur.com/B3SeFsy.jpg)
That Macadamia is really nice! :like:
Post by: David on October 14, 2021, 12:16:30 AM
Nice pair for WHW buddy ! :like:
:D
Another nice Buck ! :tu:
:iagree: whole heartily!
Post by: toolguy on October 20, 2021, 09:24:43 PM
As can be seen,it has a brass frame and oak handles but without a visible rocker rivet.
It does have a 5160 tool steel blade though.
Post by: SteveC on October 20, 2021, 09:44:48 PM
Post by: SteveC on October 20, 2021, 09:45:19 PM
(https://i.imgur.com/W8fNcqd.jpg)
Post by: Gareth on October 20, 2021, 09:56:03 PM
This Buck is not too unusual.It was offered by Copper and Clad.
As can be seen,it has a brass frame and oak handles but without a visible rocker rivet.
It does have a 5160 tool steel blade though.
I like the look of the oak on that. :tu:
Post by: David on October 20, 2021, 10:15:52 PM
This Buck is not too unusual.It was offered by Copper and Clad.
As can be seen,it has a brass frame and oak handles but without a visible rocker rivet.
It does have a 5160 tool steel blade though.
That Oak looks good! :like: I have the C&C 112 in Oak but messed around and didnt get the 110 bought before they sold out.
Cocobolo Oregon Trapper
(https://i.imgur.com/W8fNcqd.jpg)
Like the 43 in Cocobolo! :like:
Post by: David on October 20, 2021, 10:21:49 PM
Post by: toolguy on October 20, 2021, 11:08:00 PM
Nice 110 ! :like:
I like the look of the oak on that. :tu:
That Oak looks good! :like: I have the C&C 112 in Oak but messed around and didnt get the 110 bought before they sold out.
Like the 43 in Cocobolo! :like:
Thanks guys.
The oak on these limited run 5160's varied a bit. I called Claude and he informed me that he received several that were darker than the first Clip point run.So I requested that he send a dark oak on the drop point run.
Post by: toolguy on October 20, 2021, 11:10:24 PM
Cocobolo Oregon Trapper(https://i.imgur.com/W8fNcqd.jpg)
Steve your Trapper is awesome and deserves an encore. Congrats.
Post by: SteveC on October 20, 2021, 11:10:54 PM
Post by: toolguy on October 20, 2021, 11:12:43 PM
Osage Orange or as we call it around these parts Hedge.
Very cool Barlow David. Congrats.
Post by: SteveC on October 21, 2021, 12:26:45 AM
Osage Orange or as we call it around these parts Hedge.
Looking good ! :tu:
Post by: Sos24 on October 21, 2021, 03:03:36 AM
(https://uploads.tapatalk-cdn.com/20211021/757cb3605cc400dcba6198e80bda8333.jpg)
Post by: SteveC on October 21, 2021, 04:26:28 AM
Post by: Gareth on October 27, 2021, 12:02:58 PM
(https://forum.multitool.org/index.php?action=dlattach;ts=1635328861;topic=86179.0;attach=525221)
Post by: SteveC on October 27, 2021, 02:00:39 PM
Post by: David on October 27, 2021, 03:19:11 PM
Nice one to get us started ! :like:
:iagree:
Post by: David on October 27, 2021, 10:44:02 PM
Post by: SteveC on October 27, 2021, 10:49:45 PM
Post by: SteveC on October 27, 2021, 10:50:09 PM
(https://i.imgur.com/TD4YXO6.jpg)
Post by: toolguy on October 27, 2021, 10:51:54 PM
Some beautiful wood for WHW from all.
(https://uploads.tapatalk-cdn.com/20211021/757cb3605cc400dcba6198e80bda8333.jpg)
Nice looking knife !
I'd like to view the blade if you feel so inclined to display it.
Post by: toolguy on October 27, 2021, 10:56:26 PM
Vic Evowood 10. 8)
(https://forum.multitool.org/index.php?action=dlattach;ts=1635328861;topic=86179.0;attach=525221)
Hey Gareth Happy B-Day.
Here are two Wengers that have a main blade,file and standard openers.As can be seen they differ with the cork screw and phillips.
I bought the engraved one for $15.00 as it appeared,at the time, no one wanted a knife with a strangers name.except for myself.LOL
Post by: toolguy on October 27, 2021, 10:58:38 PM
Post by: toolguy on October 27, 2021, 10:59:43 PM
Post by: SteveC on October 27, 2021, 11:02:17 PM
I'll have to discover a different method of posting pictures as my past method has resulted in double posts and pictures too large to view the complete knife.
We have implemented a new picture resizing module and are still working out the kinks. Go ahead and post when someone clicks on the picture it will come to fit the page so you can see the whole picture. The pictures you posted above look fine BTW :tu:
Post by: toolguy on October 27, 2021, 11:07:23 PM
We have implemented a new picture resizing module and are still working out the kinks. Go ahead and post when someone clicks on the picture it will come to fit the page so you can see the whole picture. The pictures you posted above look fine BTW :tu:
Oh thanks Steve.I never though to click on them.
Let me try something else.
(https://www.24hourcampfire.com/ubbthreads/gallery/80/full/172787.jpg)
(https://www.24hourcampfire.com/ubbthreads/gallery/80/full/172788.jpg)
Post by: Gareth on October 27, 2021, 11:35:00 PM
Hey Gareth Happy B-Day.
Here are two Wengers that have a main blade,file and standard openers.As can be seen they differ with the cork screw and phillips.
I bought the engraved one for $15.00 as it appeared,at the time, no one wanted a knife with a strangers name.except for myself.LOL
Cheers TG. :hatsoff:
Post by: David on October 28, 2021, 12:45:38 AM
Post by: Sos24 on October 28, 2021, 03:06:57 AM
Oh thanks Steve.I never though to click on them.
Let me try something else.
(https://www.24hourcampfire.com/ubbthreads/gallery/80/full/172787.jpg)
(https://www.24hourcampfire.com/ubbthreads/gallery/80/full/172788.jpg)
Vic Evowood 10. 8)
(https://forum.multitool.org/index.php?action=dlattach;ts=1635328861;topic=86179.0;attach=525221)
Sweet looking Wood Evos toolguy and Gareth
Post by: Sos24 on October 28, 2021, 03:11:25 AM
Walnut and Desert ironwood
Walnut and Bloodwood
(https://i.imgur.com/TD4YXO6.jpg)
Nice Walnut knives. Going for the triple “W”…Walnut Wood Wednesday
Post by: David on October 28, 2021, 03:43:16 AM
Nice Walnut knives. Going for the triple “W”…Walnut Wood Wednesday
W3 it is! :tu: :D
Post by: SteveC on October 28, 2021, 04:40:08 AM
Post by: Sos24 on October 28, 2021, 09:03:06 PM
Nice looking knife !Here you go, no problem at all.
I'd like to view the blade if you feel so inclined to display it.
(https://uploads.tapatalk-cdn.com/20211028/486a7bfa75c8363e6a7fe3b472f97c6a.jpg)
Post by: SteveC on October 28, 2021, 09:22:32 PM
Post by: toolguy on October 29, 2021, 10:56:42 PM
Here you go, no problem at all.
(https://uploads.tapatalk-cdn.com/20211028/486a7bfa75c8363e6a7fe3b472f97c6a.jpg)
That's very special.That main blade is what I consider a perfect grind.Congrats.
I once owned a CC Barlow with Sambar Stag handles but in a weak moment traded it something I liked better.
Bill Cargill was the originator of CC knives.I know it was sold to BlackJack and then someone else.I believe they contracted some of the production to Queen but I'm not really sure.I think Blue Ridge Knives may have bought the CC trade name.
Post by: Sos24 on October 30, 2021, 03:54:40 AM
That's very special.That main blade is what I consider a perfect grind.Congrats.I have a Trapper that is an original from ‘83 that I love. I also have a Jack that I’m not sure which company actually manufactured.
I once owned a CC Barlow with Sambar Stag handles but in a weak moment traded it something I liked better.
Bill Cargill was the originator of CC knives.I know it was sold to BlackJack and then someone else.I believe they contracted some of the production to Queen but I'm not really sure.I think Blue Ridge Knives may have bought the CC trade name.
(https://uploads.tapatalk-cdn.com/20211030/b247ff10de00434356ebeaa844343a1f.jpg)
I may have a Stockman soon but don’t want to get too excited.
Post by: toolguy on October 30, 2021, 04:39:44 AM
Bill started that company in 1981 and they were hand made.He was a former repairman for Case knives.
The 1983 would be an original and was made by Bill himself.I don't think he sold the CC name to Blackjack until 1993-1994.
Good-on-ya.
Post by: Sos24 on October 30, 2021, 05:11:54 AM
Holy Toledo Sherry you own some sweet CC's.Thanks. I really like the Cripple Creek and would love to acquire so more originals at prices I can afford.
Bill started that company in 1981 and they were hand made.He was a former repairman for Case knives.
The 1983 would be an original and was made by Bill himself.I don't think he sold the CC name to Blackjack until 1993-1994.
Good-on-ya.
Post by: David on October 30, 2021, 12:39:24 PM
Post by: SteveC on October 30, 2021, 01:54:59 PM
I use to have a bunch of early to mid 80's CC's but I sold all them to help my oldest sister through a very difficult time.
You are a good brother ! :hatsoff:
Post by: David on November 03, 2021, 09:21:56 PM
Post by: SteveC on November 03, 2021, 10:19:31 PM
Coco x 2
(https://i.imgur.com/fGF9vcq.jpg)
Post by: David on November 03, 2021, 11:02:21 PM
Post by: toolguy on November 04, 2021, 03:16:11 AM
This one is from the Buck custom shop with S30V and oak handles.
(https://forum.multitool.org/index.php?action=dlattach;topic=63570.0;attach=259082)
(https://forum.multitool.org/index.php?action=dlattach;topic=63570.0;attach=259078)
Post by: David on November 04, 2021, 03:34:03 AM
Post by: SteveC on November 04, 2021, 03:37:24 AM
Post by: David on November 10, 2021, 10:20:46 PM
Post by: SteveC on November 10, 2021, 10:32:32 PM
Cocobolo and Ironwood
(https://i.imgur.com/qGuw8Du.jpg)
Post by: David on November 11, 2021, 01:17:40 AM
Post by: toolguy on November 11, 2021, 03:58:50 AM
Post by: SteveC on November 17, 2021, 08:00:06 PM
Post by: SteveC on November 17, 2021, 08:00:38 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: toolguy on November 17, 2021, 10:36:41 PM
It does highlight the wood grain.
Here's a Case Trapper commemorating Ducks Unlimited.This has Ebony which is very dark and the wavy grain is difficult to see but I can assure you it's there.LOL
Post by: David on November 18, 2021, 12:57:07 AM
Ebony and Macadamia
[ This attachment cannot be displayed inline in 'Print Page' view ]
Fine wood for W2! :like: verah much. :tu:
Nice photo Steve.
It does highlight the wood grain.
Here's a Case Trapper commemorating Ducks Unlimited.This has Ebony which is very dark and the wavy grain is difficult to see but I can assure you it's there.LOL
Verah nice Ebony TG! :tu:
Post by: SteveC on November 18, 2021, 01:33:09 AM
Nice photo Steve.
It does highlight the wood grain.
Here's a Case Trapper commemorating Ducks Unlimited.This has Ebony which is very dark and the wavy grain is difficult to see but I can assure you it's there.LOL
Nice grain ! :like:
Post by: SteveC on November 24, 2021, 05:29:33 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on November 25, 2021, 12:44:23 AM
Post by: David on November 25, 2021, 12:46:11 AM
Post by: SteveC on November 25, 2021, 01:49:13 AM
Post by: toolguy on November 25, 2021, 04:04:50 AM
All I have today, is this Vic 130.
Post by: David on December 01, 2021, 10:26:04 PM
Post by: toolguy on December 01, 2021, 10:33:55 PM
I'm going to take a two for one today.
Buck 110 hunter commemorating Al Buck,eldest son of Hoyt Buck.
Post by: SteveC on December 01, 2021, 11:13:15 PM
Post by: SteveC on December 01, 2021, 11:13:39 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on December 02, 2021, 01:27:47 AM
Post by: Gareth on December 02, 2021, 05:29:33 PM
Cocobolo and Bloodwood
[ This attachment cannot be displayed inline in 'Print Page' view ]
That's some lovely wood (and steel).
Post by: SteveC on December 08, 2021, 07:55:22 PM
It's WHW again :woohoo:
Cocobolo
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on December 08, 2021, 10:28:34 PM
Post by: David on December 08, 2021, 10:29:17 PM
Post by: SteveC on December 10, 2021, 02:06:57 PM
Post by: SteveC on December 15, 2021, 06:37:16 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Gareth on December 15, 2021, 07:29:47 PM
Post by: SteveC on December 15, 2021, 08:26:49 PM
Post by: David on December 15, 2021, 10:48:01 PM
Post by: Gareth on December 15, 2021, 10:52:31 PM
Post by: SteveC on December 15, 2021, 11:13:01 PM
Post by: toolguy on December 16, 2021, 12:09:44 AM
This is a Gerber Magnum Hunter from 1983.During this time period Pete Gerber was producing some fantastic knives.
I reconditioned this knife about three years ago and brought it back to almost new condition.It's now ready for another lifetime of use.
Post by: David on December 16, 2021, 12:52:39 AM
Post by: Gareth on December 16, 2021, 01:42:35 AM
WHW is active today. Congrats guys.
This is a Gerber Magnum Hunter from 1983.During this time period Pete Gerber was producing some fantastic knives.
I reconditioned this knife about three years ago and brought it back to almost new condition.It's now ready for another lifetime of use.
that's a very handsome knife TG. :tu:
Post by: toolguy on December 16, 2021, 03:03:07 AM
Good ones Steve, Gareth and TG! :tu: :like:
that's a very handsome knife TG. :tu:
Thanks David and Gareth.
Just an anecdote about the Gerber.I had an employee that did such a good job for me that month,many years ago,that I bought one of these Gerbers for him as well.I also gave him a cash bonus but he seemed more happy with the Magnum Hunter than the cash.LOL
Post by: SteveC on December 22, 2021, 08:53:06 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on December 22, 2021, 10:21:46 PM
Post by: SteveC on December 22, 2021, 11:10:19 PM
That Katalox looks great !
Post by: David on December 23, 2021, 01:00:36 AM
Sweet ! :tu:
That Katalox looks great !
Thanks! As does your Desert Ironwood. :like:
Post by: toolguy on December 23, 2021, 10:28:12 PM
I missed yesterday but I did take some shots of a Case Trapper that I just finished.
Before.
Post by: toolguy on December 23, 2021, 10:28:33 PM
I then had to completely refinish,sand,polish and buff out that area.
I had to remove rust from the underside of the back-springs and refinish the bay area of this knife. I moved on to refinished all of the scales,rear bolster and outside of the back-springs.
Here it as after all of that work.
Post by: toolguy on December 23, 2021, 10:35:54 PM
Oh well, I was a little tired after spending so much time rehabilitating this knife.I didn't realize,at first,how much work needed to be done,in order to bring this Case back to new condition.
Post by: SteveC on December 23, 2021, 11:29:41 PM
Post by: toolguy on December 29, 2021, 10:18:07 PM
It's a Case 6265 Folding Hunter.
Some knife guys are happy with the status quo and then there are some guys who have to make changes,just for the hell of it.LOL
The first picture is this knife in stock form. The next pictures are the new thinned version.I've not finished yet but I won't reveal my next mods until after they're done.
(https://forum.multitool.org/index.php?action=dlattach;ts=1640812686;topic=77905.0;attach=528688;image)
(https://forum.multitool.org/index.php?action=dlattach;ts=1640812686;topic=77905.0;attach=528689;image)
(https://forum.multitool.org/index.php?action=dlattach;ts=1640812687;topic=77905.0;attach=528690;image)
Post by: SteveC on December 29, 2021, 10:51:17 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on December 29, 2021, 11:19:17 PM
Walnut
[ This attachment cannot be displayed inline in 'Print Page' view ]
Love that well aged Walnut! :like:
Post by: David on December 29, 2021, 11:22:48 PM
Post by: David on December 29, 2021, 11:53:31 PM
Walnut
[ This attachment cannot be displayed inline in 'Print Page' view ]
:tu:. :like:
Post by: SteveC on December 29, 2021, 11:54:22 PM
Cocobolo new and old
Love the contrast ! :tu:
Post by: Gareth on December 30, 2021, 01:35:05 AM
Post by: toolguy on December 30, 2021, 07:04:22 AM
??????????????????????????????????????????????
I hope it's not just my computer!
Oh well, I'll re-post them.
Post by: SteveC on December 30, 2021, 01:56:11 PM
I was wondering where your pictures went :D
Post by: toolguy on December 30, 2021, 09:39:45 PM
Nice grain ! :tu:
I was wondering where your pictures went :D
I don't know either.
At least it is not just my computer.LOL
Post by: David on December 31, 2021, 01:29:41 AM
The pictures,which I posted in Reply #1863,have disappeared.
??????????????????????????????????????????????
I hope it's not just my computer!
Oh well, I'll re-post them.
Nice! :tu:
I dont see your earlier pics either. :dunno:
Post by: SteveC on January 05, 2022, 06:42:15 PM
Bloodwood and and Ironwood
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on January 05, 2022, 10:41:56 PM
Post by: toolguy on January 05, 2022, 11:18:11 PM
This is a Case 54 Trapper with their Rattle Snake pattern.
Most of these were done on bone handles,this one was done on oak handles.
Post by: SteveC on January 06, 2022, 12:23:00 AM
Post by: SurgeUk on January 12, 2022, 05:26:05 PM
Cool ! :like: :tu:
:iagree: :like: :tu:
Post by: SurgeUk on January 12, 2022, 05:27:57 PM
Post by: SteveC on January 12, 2022, 06:41:31 PM
Post by: SurgeUk on January 12, 2022, 07:03:03 PM
:woohoo: The first WHW of the Year !
Bloodwood and and Ironwood
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice duo :tu: :like:
Post by: SteveC on January 12, 2022, 08:09:00 PM
Macadamia and Osage Orange
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on January 12, 2022, 10:23:34 PM
Post by: David on January 12, 2022, 10:26:46 PM
Post by: SteveC on January 12, 2022, 10:44:54 PM
Post by: toolguy on January 13, 2022, 12:20:57 AM
Good ones Surge,David and Steve.
This is an original Buck 2 dot 110 hunter from the era of 1974-1982.This is the way I found and bought it.It's in pristine condition with the old square brass frame,genuine Ebony handles and a full blade.This has a 440C steel blade as well.
They're getting very hard to find in this condition and at a fair price.It seems as though many people who find these,believe they've found a nugget of gold and ask ridiculous prices for them.
Post by: SteveC on January 13, 2022, 01:08:57 AM
Post by: David on January 13, 2022, 02:16:50 AM
Nice covers on that one tg ! :tu:
:iagree:
Post by: SurgeUk on January 16, 2022, 07:07:22 PM
You all have upped the game today!
Good ones Surge,David and Steve.
This is an original Buck 2 dot 110 hunter from the era of 1974-1982.This is the way I found and bought it.It's in pristine condition with the old square brass frame,genuine Ebony handles and a full blade.This has a 440C steel blade as well.
They're getting very hard to find in this condition and at a fair price.It seems as though many people who find these,believe they've found a nugget of gold and ask ridiculous prices for them.
:cheers: That is a lovely looking knife :drool: (I should buy a 110 :think:)
Post by: Gareth on January 19, 2022, 12:33:28 PM
Post by: SteveC on January 19, 2022, 01:49:49 PM
Post by: David on January 19, 2022, 05:31:08 PM
Post by: SteveC on January 19, 2022, 05:39:42 PM
Post by: David on January 19, 2022, 05:40:17 PM
Sticking with this penknife for today. For once it coincides with it being on a Wednesday.
Nice one for WHW! :like:
Post by: SteveC on January 19, 2022, 05:46:36 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on January 19, 2022, 06:40:07 PM
Post by: toolguy on January 19, 2022, 09:58:32 PM
This is an early version of the Buck 112 ranger.It's the second version which used Shedua wood.
Shedua has many names with the most popular being Shedua, Ovangkol, Mozambique and African Walnut.
Post by: David on January 19, 2022, 10:53:25 PM
David and Steve,you guys always have the coolest trads.Congrats.
This is an early version of the Buck 112 ranger.It's the second version which used Shedua wood.
Shedua has many names with the most popular being Shedua, Ovangkol, Mozambique and African Walnut.
That a really cool early 112 TG!
Post by: SteveC on January 19, 2022, 11:37:21 PM
Post by: toolguy on January 20, 2022, 12:38:54 AM
That a really cool early 112 TG!
:iagree: :tu:
Thank you guys.
Post by: Gareth on January 26, 2022, 12:03:02 PM
Post by: SteveC on January 26, 2022, 01:40:36 PM
Post by: David on January 26, 2022, 03:10:06 PM
Post by: SteveC on January 26, 2022, 05:41:48 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on January 26, 2022, 10:19:57 PM
Chechen Rosewood and Walnut
[ This attachment cannot be displayed inline in 'Print Page' view ]
Good wood for WHW buddy! :tu:
Post by: David on January 26, 2022, 10:20:45 PM
Post by: SteveC on January 26, 2022, 11:12:33 PM
Well aged cocobolo
Like fine wine ! :like:
Post by: SteveC on February 02, 2022, 08:41:54 PM
Bloodwood and Ironwood
.
Post by: David on February 02, 2022, 11:10:01 PM
Post by: David on February 02, 2022, 11:15:58 PM
Post by: SteveC on February 03, 2022, 01:16:37 AM
Beautiful wood for WHW! :tu:
Likewise ! :tu:
Post by: Gareth on February 03, 2022, 10:00:13 AM
A day late in posting, but these were in my pocket yesterday. :D
Post by: Adam5 on February 03, 2022, 01:04:27 PM
Post by: David on February 03, 2022, 06:15:49 PM
Post by: SteveC on February 04, 2022, 05:39:34 AM
Post by: SteveC on February 09, 2022, 07:55:36 PM
.
Post by: David on February 09, 2022, 10:14:00 PM
Post by: David on February 09, 2022, 10:14:46 PM
Post by: GA1dad on February 10, 2022, 12:42:47 AM
I toted the Brown Mule for WHW.
Post by: SteveC on February 10, 2022, 05:37:58 AM
Post by: SteveC on February 16, 2022, 05:12:26 PM
Cocobolo and Mesquite
Post by: David on February 16, 2022, 10:34:07 PM
Post by: David on February 16, 2022, 10:47:46 PM
Post by: toolguy on February 17, 2022, 01:51:09 AM
Buck did use genuine Macassar Ebony on these production models.You can see that they didn't try to match the wood.It was,after all,a standard production model.
Post by: David on February 17, 2022, 01:57:40 AM
Post by: SteveC on February 17, 2022, 02:00:30 AM
Post by: toolguy on February 17, 2022, 02:53:48 AM
Nice two dot TG! Love the blade on the two dots and that thick handle.
Thanks David.Right back at you brother.
Good ones TG and David ! :like:
Thanks Steve.
Post by: David on February 23, 2022, 10:14:46 PM
Post by: SteveC on February 23, 2022, 10:55:37 PM
Post by: SteveC on February 23, 2022, 10:55:55 PM
.
Post by: Gareth on February 23, 2022, 11:12:20 PM
Late shot of the Grohmann Slimline for me today.
Post by: SteveC on February 23, 2022, 11:57:59 PM
Post by: David on February 24, 2022, 02:38:04 AM
Cocobolo
.
Lovely Cocobolo! :like:
Late shot of the Grohmann Slimline for me today.
Nice wood on that one Gareth. :like:
Post by: SteveC on March 02, 2022, 07:16:24 PM
Ironwood
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Gareth on March 02, 2022, 08:58:08 PM
:woohoo:
Ironwood
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice. 8)
Post by: Gareth on March 02, 2022, 09:01:47 PM
Post by: David on March 02, 2022, 10:52:00 PM
:woohoo:
Ironwood
[ This attachment cannot be displayed inline in 'Print Page' view ]
Verah nice Ironwood on that Calf Roper! :tu:
Post by: David on March 02, 2022, 10:53:16 PM
Post by: David on March 02, 2022, 11:35:38 PM
So, almost all my pocket knives are ones that would consider carrying. Almost. ;) Not that the Swedish Barrel knives are delicate, nor that they are kinda pricey these days, nor even that they are tough justification under UK knife laws. No, they're just a PITA to actually use! :D Still cool though.
:tu:. :like:
Post by: SteveC on March 02, 2022, 11:37:42 PM
Post by: Gareth on March 09, 2022, 05:20:36 PM
Post by: David on March 09, 2022, 06:19:10 PM
Post by: SteveC on March 09, 2022, 06:31:28 PM
Post by: SteveC on March 09, 2022, 08:14:35 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on March 09, 2022, 10:20:32 PM
Post by: David on March 09, 2022, 10:21:46 PM
Post by: SteveC on March 09, 2022, 11:17:12 PM
Ironwood and Sucker Rod
Nice ! :tu:
Post by: Gareth on March 09, 2022, 11:30:09 PM
Ironwood and Sucker Rod
Love that spanner inlay shield. :tu:
Post by: SteveC on March 16, 2022, 04:48:11 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Gareth on March 16, 2022, 08:35:06 PM
Post by: David on March 16, 2022, 09:24:27 PM
Post by: David on March 16, 2022, 09:26:46 PM
Post by: SteveC on March 18, 2022, 01:02:46 PM
Post by: Gareth on March 23, 2022, 12:52:47 PM
Post by: SteveC on March 23, 2022, 01:03:12 PM
Post by: Gareth on March 23, 2022, 01:11:39 PM
Very nice Gareth and great picture ! :like:
cheers Steve. :hatsoff:
Post by: David on March 23, 2022, 04:42:08 PM
Post by: SteveC on March 23, 2022, 09:04:10 PM
Post by: SteveC on March 23, 2022, 09:39:06 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Farmer X on March 24, 2022, 01:02:40 AM
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on March 24, 2022, 02:02:31 AM
Coco
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice cocobolo! :like:
Post by: David on March 24, 2022, 02:03:00 AM
There are some truly spectacular knives in this thread! My entry is a little more pedestrian (and quite small): the Opinel No. 3
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
:tu:. :like:
Post by: Gareth on March 24, 2022, 03:18:50 PM
There are some truly spectacular knives in this thread! My entry is a little more pedestrian (and quite small): the Opinel No. 3
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
I've never had an Opinel that small myself. It's very sweet. :tu:
Post by: Farmer X on March 25, 2022, 05:30:54 AM
I've never had an Opinel that small myself. It's very sweet. :tu:Thanks! I should have an even smaller one (about 84mm open) tomorrow.
Post by: Gareth on March 30, 2022, 11:35:03 AM
Post by: Adam5 on March 30, 2022, 12:25:56 PM
Post by: SteveC on March 30, 2022, 02:06:45 PM
Post by: SteveC on March 30, 2022, 08:17:32 PM
Post by: Gareth on March 30, 2022, 09:38:36 PM
Mesquite and Bloodwood
Nice. 8)
Post by: David on March 30, 2022, 10:20:54 PM
Post by: David on March 30, 2022, 10:23:07 PM
Mesquite and Bloodwood
Good choices for WHW! :tu:
Given I was carrying it yesterday as well it seem almost lazy to stick with the Foreign pen-knife...but I don't care. :D
:tu: :like:
Post by: SteveC on March 30, 2022, 11:24:00 PM
Desert Ironwood
:like: :tu:
Post by: SurgeUk on March 31, 2022, 01:50:09 PM
I went to visit a friend yesterday and for a change took the Boker with me (I don't carry it much)
First it came for a pint, or two :drink: and then a curry (it sliced the chillies) :drool:
Post by: SteveC on March 31, 2022, 02:03:53 PM
Post by: SurgeUk on March 31, 2022, 02:47:58 PM
Nice one Surge ! :like:
:cheers: Steve :hatsoff:
Post by: pfrsantos on March 31, 2022, 03:36:25 PM
Excellent carries awl :salute:
I went to visit a friend yesterday and for a change took the Boker with me (I don't carry it much)
First it came for a pint, or two :drink: and then a curry (it sliced the chillies) :drool:
The Stockman helped cutting some Scottish Cheddar for dessert today. The gin is for later on, after diner. Just wanted to include it in the pic. Great minds and awl that...
8) 8)
Post by: SteveC on March 31, 2022, 04:13:43 PM
Post by: Gareth on March 31, 2022, 04:16:10 PM
Post by: SurgeUk on March 31, 2022, 04:51:17 PM
The Stockman helped cutting some Scottish Cheddar for dessert today. The gin is for later on, after diner. Just wanted to include it in the pic. Great minds and awl that...
8) 8)
Excellent choices and use PF :drink: :drool:
Post by: SurgeUk on March 31, 2022, 04:53:11 PM
Well, now I just want a gin and tonic. ::) Half past three isn't too early is it? :whistle:
I'd say it's Gin O' clock Gareth ;)
Post by: pfrsantos on March 31, 2022, 05:26:07 PM
Excellent choices and use PF :drink: :drool:
Likewise, Sir. Likewise.
:hatsoff:
Well, now I just want a gin and tonic. ::) Half past three isn't too early is it? :whistle:
Somewhere around the world it's past diner time. Go ahead!
:cheers: :salute:
Post by: pfrsantos on March 31, 2022, 05:27:37 PM
Post by: SurgeUk on March 31, 2022, 08:46:30 PM
(https://quoteslogy.com/wp-content/uploads/2016/11/11e26add179a86b31641c3b1594aa2bb.jpg)
Wise words PF, wise words :2tu: ;)
Post by: SteveC on April 06, 2022, 06:16:36 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on April 06, 2022, 11:12:40 PM
Post by: NutSAK on April 07, 2022, 01:37:48 AM
(https://live.staticflickr.com/65535/51987622224_06b632a754_k.jpg)
Post by: SteveC on April 07, 2022, 01:59:50 PM
Post by: Gareth on April 13, 2022, 06:48:48 PM
(https://forum.multitool.org/index.php?action=dlattach;ts=1649868380;topic=68477.0;attach=534124)
Post by: SteveC on April 13, 2022, 08:41:19 PM
Ironwood and Cocobolo
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: NutSAK on April 13, 2022, 10:35:14 PM
Bird's Eye Maple for me on this stormy Wednesday.
(https://live.staticflickr.com/1956/44449008595_afec350eb3_k.jpg)
Post by: SteveC on April 13, 2022, 11:28:14 PM
Post by: Farmer X on April 13, 2022, 11:37:01 PM
I finally remembered to take a photo for Wood Handled Wednesday. Some walnut (I'm pretty sure, anyway) on a 1974 Case 12031L that I need to get cleaned up.
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Sos24 on April 14, 2022, 04:36:11 AM
So I’ll add some ironwood
(https://uploads.tapatalk-cdn.com/20220414/c77fed09fc002f12fbf1e70d8d6557c3.jpg)
Post by: SteveC on April 14, 2022, 05:55:06 AM
Post by: NutSAK on April 14, 2022, 09:11:38 AM
:
I finally remembered to take a photo for Wood Handled Wednesday. Some walnut (I'm pretty sure, anyway) on a 1974 Case 12031L that I need to get cleaned up.
Your '74 sure has some character! The blades/tools are in such great shape too. That's going to make a great user all cleaned up!
Post by: David on April 14, 2022, 02:20:18 PM
Post by: Sos24 on April 15, 2022, 08:14:01 AM
Ironwood, Cocobolo, Birds Eye Maple and Walnut. Good wood for WHW! :like::agree: a nice variety and selection
Post by: SteveC on April 20, 2022, 11:34:03 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Farmer X on April 21, 2022, 12:08:27 AM
Here are two Cammies, a short line 1 hawkbill and a slightly older TL-29. I believe both are rosewood.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on April 21, 2022, 05:52:24 AM
Post by: Gareth on April 28, 2022, 03:54:03 PM
Post by: Farmer X on April 28, 2022, 07:29:37 PM
Post by: SteveC on May 04, 2022, 07:55:20 PM
Cocobolo and Ironwood
(https://forum.multitool.org/index.php?action=dlattach;ts=1651686864;topic=68477.0;attach=535213)
Post by: Farmer X on May 04, 2022, 11:06:07 PM
I should have a couple for next Wednesday, if USPS doesn't drag their feet...
Post by: SteveC on May 04, 2022, 11:18:19 PM
Post by: nate j on May 05, 2022, 01:31:47 AM
Post by: SteveC on May 05, 2022, 01:34:07 AM
Post by: David on May 05, 2022, 01:44:46 AM
Post by: David on May 05, 2022, 01:46:28 AM
Shameless repost from the Folding Hunter (not a Buck 110) challenge…
:tu: :like:
Post by: Gareth on May 05, 2022, 02:04:52 AM
(https://forum.multitool.org/index.php?action=dlattach;ts=1651681863;topic=68477.0;attach=535210;image)
Post by: Aloha on May 05, 2022, 02:14:47 AM
Post by: David on May 05, 2022, 02:34:26 AM
Rosewood.
(https://forum.multitool.org/index.php?action=dlattach;ts=1651681863;topic=68477.0;attach=535210;image)
Always good to see that knife! :tu:
Post by: Farmer X on May 05, 2022, 03:32:29 AM
Post by: Gareth on May 11, 2022, 12:38:05 PM
Post by: SteveC on May 11, 2022, 01:23:46 PM
Post by: SteveC on May 11, 2022, 08:35:49 PM
Osage Orange and Ironwood
(https://forum.multitool.org/index.php?action=dlattach;ts=1652294082;topic=68477.0;attach=535597)
Post by: Gareth on May 11, 2022, 09:56:03 PM
:woohoo: It's WHW again !
Osage Orange and Ironwood
(https://forum.multitool.org/index.php?action=dlattach;ts=1652294082;topic=68477.0;attach=535597)
That osage is always really striking. :tu:
Post by: David on May 11, 2022, 11:01:16 PM
Osage Orange aka hedge around these parts. And some Rosewood
Post by: Farmer X on May 11, 2022, 11:26:53 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on May 12, 2022, 01:31:53 AM
Post by: SteveC on May 18, 2022, 06:06:01 PM
Cocobolo and Macadamia wood
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on May 18, 2022, 06:14:23 PM
:woohoo: It's WHW !
Cocobolo and Macadamia wood
[ This attachment cannot be displayed inline in 'Print Page' view ]
Good wood for WHW! :tu:
Post by: Aloha on May 18, 2022, 06:30:09 PM
Osage is so gorgeous. Those twin olive Opinels are also handsome. I find them all very nice to look at.
Post by: David on May 18, 2022, 10:29:46 PM
Post by: SteveC on May 18, 2022, 10:55:18 PM
Post by: SteveC on May 18, 2022, 10:55:44 PM
Great WHW photos, y'awl! My contribution: a pair of Opinel No. 6s in olivewood. I sure would like to see more knives with olivewood.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Lovely Grain Dan ! :tu:
Post by: Gareth on May 19, 2022, 12:49:18 AM
Post by: SteveC on May 19, 2022, 12:51:43 AM
Post by: Gareth on May 19, 2022, 12:51:56 AM
:woohoo: It's WHW !
Cocobolo and Macadamia wood
[ This attachment cannot be displayed inline in 'Print Page' view ]
Macadamia isn't the first wood I think of for knife covers. Looks good though. :tu:
Post by: Gareth on May 19, 2022, 12:52:59 AM
Cocobolo and Bloodwood
Those Pony Jack knives are always going to make me smile. :cheers:
Post by: David on May 19, 2022, 02:10:00 AM
I'll just sneak this one in before the end of the day. Cudeman Spanish peasant knife (in olivewood).
Love that olive wood! :tu:
Post by: Farmer X on May 19, 2022, 03:01:09 AM
Post by: Aloha on May 19, 2022, 03:06:56 AM
Really beautiful woods.
Post by: Sos24 on May 19, 2022, 06:42:20 AM
(https://uploads.tapatalk-cdn.com/20220519/c2a8b94097f90439c90ca6964864b917.jpg)
Post by: SteveC on May 19, 2022, 01:32:23 PM
Post by: David on May 19, 2022, 03:38:37 PM
Some Ironwood
(https://uploads.tapatalk-cdn.com/20220519/c2a8b94097f90439c90ca6964864b917.jpg)
:tu:. :like:
Post by: SteveC on May 25, 2022, 11:08:30 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on May 26, 2022, 01:37:45 AM
Katalox
Post by: SteveC on May 26, 2022, 03:58:43 AM
Post by: SteveC on June 01, 2022, 08:58:57 PM
Rosewood and Bloodwood
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on June 01, 2022, 11:04:15 PM
Osage Orange and Desert Ironwood.
Post by: SteveC on June 01, 2022, 11:07:46 PM
Nice knives and wood covers!
Osage Orange and Desert Ironwood.
Fine pair for WHW ! :like: :tu:
Post by: SteveC on June 08, 2022, 06:39:14 PM
Cocobolo and Ironwood
Post by: Gareth on June 08, 2022, 10:27:14 PM
:woohoo: It's WHW !
Cocobolo and Ironwood
Man, how much do I love that spear and pen jack? :drool:
Post by: David on June 08, 2022, 11:31:04 PM
Post by: SteveC on June 15, 2022, 10:56:55 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: McStitchy on June 15, 2022, 11:15:05 PM
Post by: Gareth on June 15, 2022, 11:31:04 PM
Post by: Gareth on June 15, 2022, 11:32:09 PM
Cocobolo x 2
[ This attachment cannot be displayed inline in 'Print Page' view ]
As you know, I love that Pony Jack. :hatsoff:
Post by: toolguy on June 15, 2022, 11:46:23 PM
Post by: toolguy on June 16, 2022, 12:03:00 AM
I have many 65's with this type of handle,so I decided to make a change on one of them.I took it into the shop,selected the appropriate belt for my grinder and ground off the jigging.I then hand sanded it with several finer grits and buffed it to a soft sheen.
Some time in the future I will engrave the oval shield with something interesting.
Post by: SteveC on June 16, 2022, 12:53:03 AM
Post by: McStitchy on June 16, 2022, 12:56:21 AM
Post by: toolguy on June 16, 2022, 01:08:32 AM
Looks great TG ! :like:
:iagree: :like: ...nice job TG :tu:
Thanks guys.I sure do like working with my knives.
This is what keeps some of us going in this hobby.Changing from the status quo to something different.
Post by: Gareth on June 16, 2022, 01:11:11 AM
Looks great TG ! :like::iagree:
Post by: David on June 16, 2022, 02:07:18 AM
Cocobolo x 2
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice cocobolo buddy! :like:
This is a case 6265 with a jigged Stamina Wood handles.
I have many 65's with this type of handle,so I decided to make a change on one of them.I took it into the shop,selected the appropriate belt for my grinder and ground off the jigging.I then hand sanded it with several finer grits and buffed it to a soft sheen.
Some time in the future I will engrave the oval shield with something interesting.
Looks good toolguy! :tu:
Post by: David on June 16, 2022, 02:08:46 AM
Post by: SteveC on June 16, 2022, 02:59:18 AM
Post by: Farmer X on June 16, 2022, 04:43:28 PM
Post by: Gareth on June 22, 2022, 12:40:19 PM
Post by: SteveC on June 22, 2022, 02:45:19 PM
Post by: SteveC on June 22, 2022, 10:33:18 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on June 22, 2022, 11:23:35 PM
Post by: David on June 22, 2022, 11:25:17 PM
Post by: SteveC on June 22, 2022, 11:52:29 PM
Post by: Farmer X on June 23, 2022, 05:56:45 AM
Verah nice wood for WHW! :tu::iagree:
Post by: Gareth on June 29, 2022, 11:29:48 AM
Post by: David on June 29, 2022, 11:57:40 AM
Post by: SteveC on June 29, 2022, 01:38:39 PM
Post by: SteveC on June 29, 2022, 10:04:12 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on June 29, 2022, 10:34:18 PM
Post by: David on June 29, 2022, 10:40:17 PM
Post by: SteveC on June 29, 2022, 11:23:26 PM
Post by: Adam5 on June 30, 2022, 02:53:49 AM
Post by: Adam5 on June 30, 2022, 03:13:09 AM
(https://i.imgur.com/ApB4WD1.jpg)
Post by: SteveC on June 30, 2022, 05:33:28 AM
Post by: Jud65 on June 30, 2022, 10:12:32 AM
Post by: David on June 30, 2022, 11:55:42 AM
This knife does not compare in looks with the knives in this thread. But it does have wooden handles :tu:
(https://i.imgur.com/ApB4WD1.jpg)
Workhorse! :tu:
Post by: David on June 30, 2022, 11:56:10 AM
2 of my favourites…
Two nice ones! :like:
Post by: Gareth on June 30, 2022, 01:14:33 PM
2 of my favourites…
fantastic pair Jud. :hatsoff:
Post by: SteveC on June 30, 2022, 01:50:58 PM
Post by: WaynejG on June 30, 2022, 02:16:50 PM
Sent from my SM-N950F using Tapatalk
Post by: Farmer X on June 30, 2022, 06:57:53 PM
This knife does not compare in looks with the knives in this thread. But it does have wooden handles :tu:And birdseye rivets! :tu:
Nice turnout for WHW, y'awl! :salute:
Post by: SteveC on July 06, 2022, 04:51:32 PM
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=538132;fs=497127)
Post by: SurgeUk on July 06, 2022, 05:52:39 PM
I don't post here often but here's my proffering for WHW (awlso Wave Weds :whistle:)
Stay safe people :salute: :drink:
Post by: SteveC on July 06, 2022, 06:27:34 PM
Post by: SurgeUk on July 06, 2022, 08:18:06 PM
:like: :tu:
Cheers Steve :hatsoff: :cheers:
Post by: David on July 06, 2022, 09:08:24 PM
Two kinds of Ebony
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=538132;fs=497127)
Love the Ebony! :tu:
Post by: SteveC on July 13, 2022, 08:43:17 PM
Rosewood and Ebony
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Farmer X on July 13, 2022, 09:44:31 PM
Post by: Gareth on July 14, 2022, 12:32:24 AM
Post by: Sos24 on July 14, 2022, 08:00:55 AM
(https://uploads.tapatalk-cdn.com/20220714/c3e3f3a601da5ceea89d988173e442e5.jpg)
Post by: SteveC on July 14, 2022, 10:53:41 PM
Post by: Gareth on July 15, 2022, 12:06:00 AM
Post by: SteveC on July 20, 2022, 09:11:32 PM
Walnut and Cocobolo
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on July 20, 2022, 10:06:02 PM
Some ironwood posing with a cicada carcass
(https://uploads.tapatalk-cdn.com/20220714/c3e3f3a601da5ceea89d988173e442e5.jpg)
Beautiful Ironood!
Post by: David on July 20, 2022, 10:08:05 PM
Katalox and Desert Ironwood
Post by: SteveC on July 20, 2022, 11:08:20 PM
Post by: Farmer X on July 21, 2022, 05:37:09 AM
Post by: Sos24 on July 21, 2022, 08:27:29 AM
Thanks guys.
I was boring and went with the same ironwood jack, but it is a favorite and it seems you all like it too.
(https://uploads.tapatalk-cdn.com/20220721/53e172c00f0c0e8537424c2ba65fb28e.jpg)
Post by: SteveC on July 21, 2022, 02:51:32 PM
Post by: Farmer X on July 22, 2022, 05:49:04 AM
I was boring and went with the same ironwood jack, but it is a favorite and it seems you all like it too.Indeed I do! The beer sounds delicious, as well.
Post by: Sos24 on July 22, 2022, 08:13:24 AM
Indeed I do! The beer sounds delicious, as well.Thanks. It was a good beer. Never seen it before,so had to try.
Post by: David on August 03, 2022, 06:50:08 PM
Post by: Gareth on August 03, 2022, 09:41:28 PM
A little Ebony today!
Snap! :D
Post by: Sos24 on August 03, 2022, 11:56:53 PM
(https://uploads.tapatalk-cdn.com/20220803/d63ac709e693460d5c6ce3403704b859.jpg)
Post by: SteveC on August 04, 2022, 12:03:08 AM
Post by: SteveC on August 04, 2022, 12:04:01 AM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: LoopCutter on August 04, 2022, 12:19:13 AM
[ This attachment cannot be displayed inline in 'Print Page' view ]
It is a big’em, and some of the strongest backsprings I have encountered.
Post by: SteveC on August 04, 2022, 01:16:41 AM
Post by: LoopCutter on August 04, 2022, 01:30:14 AM
Nice one LC, watch them fingers ! :tu:Are GECs known to have very very stiff springs?
This was Sos24’s, she offered to send it to me but I insisted on a trade or other options. She said it saw no carry time and I understand why.
My hands are old, but still can grip.
Other than oiling and allowing blades to rest at about 2 o’clock open position do have any suggestions ?
Post by: SteveC on August 04, 2022, 01:54:48 AM
Are GECs known to have very very stiff springs?
This was Sos24’s, she offered to send it to me but I insisted on a trade or other options. She said it saw no carry time and I understand why.
My hands are old, but still can grip.
Other than oiling and allowing blades to rest at about 2 o’clock open position do have any suggestions ?
The early GEC's are known for stiff springs and then they kind of overcompensated and some got too weak. Most are middle of the road now but the 23's have fairly stout pulls. I have the Linerlock version and it's not quite as stiff but I eased the edges of the tang to make it a bit easier.
Dean had a pretty good tutorial on the subject. I just did this to my Ebony Lambsfoot a few weeks ago with great results.
https://forum.multitool.org/index.php/topic,81890.msg1974066.html#msg1974066
I use a small square hobby file from the Nicholson needle file set. https://www.homedepot.com/p/Nicholson-5-1-2-in-Assorted-Hobby-Craft-Mini-File-Set-6-Piece-42030L/100009811?source=shoppingads&locale=en-US
Post by: LoopCutter on August 04, 2022, 02:02:56 AM
Post by: Adam5 on August 04, 2022, 02:10:17 AM
A little Ebony today!
Nice knife, David :like:
One day
:D
Post by: Adam5 on August 04, 2022, 02:12:22 AM
Maple Burl scales
(https://uploads.tapatalk-cdn.com/20220803/d63ac709e693460d5c6ce3403704b859.jpg)
Great looking scales!
Post by: Adam5 on August 04, 2022, 02:14:31 AM
Snap! :D
What is the SAK-like knife, Gareth?
Post by: Adam5 on August 04, 2022, 02:16:29 AM
Cocobolo and Osage Orange
[ This attachment cannot be displayed inline in 'Print Page' view ]
(https://i.imgur.com/42uY5mz.jpg)
Post by: Adam5 on August 04, 2022, 02:17:22 AM
A Wood handle model arrived in my mailbox today.
[ This attachment cannot be displayed inline in 'Print Page' view ]
It is a big’em, and some of the strongest backsprings I have encountered.
Whoa! That knife looks awesome :like: :like: :like:
Post by: LoopCutter on August 04, 2022, 02:29:28 AM
Whoa! That knife looks awesome :like: :like: :like:Thank you.
It is awesome, and love the drop point blade. Just a bear trap to open and more dangerous to close.
Sos24 offered it to me and I arranged a trade. Hers arrived today by surprise, my package to her should arrive Friday (?)
The blades are harty and maybe more so than my Buck 110.
But, it is a quality built piece of art. Brazilian Cherry is the wood. (iirc)
Post by: Farmer X on August 04, 2022, 04:19:28 AM
Post by: David on August 04, 2022, 06:14:23 AM
Are GECs known to have very very stiff springs?
This was Sos24’s, she offered to send it to me but I insisted on a trade or other options. She said it saw no carry time and I understand why.
My hands are old, but still can grip.
Other than oiling and allowing blades to rest at about 2 o’clock open position do have any suggestions ?
Yup the Beaver Tail 23 has a stout pull. But it's not as stout as the Natural Bone 23. :D
Post by: Gareth on August 04, 2022, 10:48:00 AM
What is the SAK-like knife, Gareth?
It's a Boker Mini Tech Tool 3. Fantastic little MT that I'd recommend to anyone. https://forum.multitool.org/index.php/topic,81360.msg1921602.html#msg1921602
Post by: SteveC on August 10, 2022, 11:26:16 PM
Bloodwood and Spalted Beech
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=540342;fs=443595)
Post by: David on August 11, 2022, 01:46:03 AM
:woohoo: it's WHW !
Bloodwood and Spalted Beech
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=540342;fs=443595)
Couple beauties! B :like:
Post by: David on August 11, 2022, 01:47:44 AM
Post by: SteveC on August 11, 2022, 02:07:53 AM
Couple beauties! B :like:
Likewise buddy ! :cheers:
Post by: Sos24 on August 11, 2022, 07:22:20 AM
Post by: Farmer X on August 12, 2022, 05:08:53 AM
Post by: SteveC on August 17, 2022, 11:12:03 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on August 18, 2022, 01:37:41 AM
Post by: SteveC on August 18, 2022, 05:31:54 AM
Post by: Gareth on August 24, 2022, 12:36:57 PM
Post by: LoopCutter on August 24, 2022, 02:15:58 PM
A Tobacco model Center Swell and a 703 Buck Colt.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Gareth on August 24, 2022, 08:25:51 PM
Post by: SteveC on August 24, 2022, 08:44:19 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on August 31, 2022, 08:55:48 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on August 31, 2022, 10:56:54 PM
Ebony, Bloodwood and Ebony
Post by: Shuya on September 07, 2022, 11:13:32 AM
Le Sabot L'Alpin in walnut handles 12C27.
Post by: Gareth on September 07, 2022, 11:51:00 AM
Post by: Echotech on September 07, 2022, 11:57:27 AM
Post by: Shuya on September 07, 2022, 12:07:39 PM
Very clean lines on that knife Shuya. I like it. :tu:Thanks.
I should provide a little information on that knife.
The pattern originated from the Savoyen and spread out to the alps and alpine regions of france.
Other names for it are Montagnard or Savoyard.
The exact age is hard to find but it is said it was found first at the end of the 19th century.
It was the knife of peaseants living on the mountain pastures, used for forestry, cattle duties and household chores like cheesemaking or at the table.
The original versions didnt have any bolsters (these are modern interpretations) and mostly some sort of horn handles or wood of the region like juniper.
Post by: SteveC on September 07, 2022, 01:57:15 PM
Is it a slipjoint ?
Post by: Shuya on September 07, 2022, 02:40:36 PM
Very nice Shuya :like:It is. Almost all french knifes are non locking, like that.
Is it a slipjoint ?
Crazy strong spring with halfstop.
The ram horn knive I recently bought (see french lovers topic) on a scale from 1 (friction folder) to 10 (Vic Soldier) is easily a 20. Really,
Post by: SteveC on September 07, 2022, 08:09:44 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: LoopCutter on September 07, 2022, 08:10:21 PM
My wood handle contribution is more of a brute,
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on September 07, 2022, 09:08:33 PM
Post by: Gareth on September 14, 2022, 02:12:02 PM
Post by: LoopCutter on September 14, 2022, 02:46:31 PM
I sorted out some Buck wood scale folders for a group shot!
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on September 14, 2022, 02:58:26 PM
It's Wednesday and I actually remembered to pick up something with wooden covers! :D
Good one to get us going ! :like:
Post by: nate j on September 14, 2022, 09:22:31 PM
Post by: LoopCutter on September 14, 2022, 09:51:01 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on September 14, 2022, 11:13:10 PM
Post by: SteveC on September 14, 2022, 11:13:34 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Gareth on September 15, 2022, 12:09:38 AM
GEC Pony Jack for WHW…
Love the look of those GEC Pony Jacks. :salute:
Post by: Aloha on September 15, 2022, 12:15:27 AM
That swell centre is the bee's knees mate. :drool:
:iagree:
Post by: SteveC on September 21, 2022, 11:33:21 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Gareth on September 22, 2022, 12:31:03 AM
My Grohmann Slimline fits in here (even if I wasn't really thinking about WHW). :-[
Post by: LoopCutter on September 22, 2022, 01:04:36 AM
I did have my BlueWood Ranger available but was preempted by another Ranger when the camera was deployed.
A picture of work earlier this week.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on September 22, 2022, 01:19:38 AM
Post by: SteveC on September 28, 2022, 11:20:27 PM
Post by: LoopCutter on September 28, 2022, 11:48:04 PM
Got me, my Buck 112 Drop point with some outdoor time. The Blue Wood is very dark, just get done glints of blue in the right light.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on September 29, 2022, 02:32:27 AM
Post by: David on October 12, 2022, 09:47:40 PM
:like: Steve, that is very sharp looking knife handle 😜
Got me, my Buck 112 Drop point with some outdoor time. The Blue Wood is very dark, just get done glints of blue in the right light.
[ This attachment cannot be displayed inline in 'Print Page' view ]
LC. :tu:
Post by: David on October 12, 2022, 09:48:32 PM
:tu:
Verah nice! :like:
Post by: David on October 12, 2022, 09:50:05 PM
Post by: SteveC on October 12, 2022, 10:22:56 PM
Post by: SteveC on October 12, 2022, 10:23:20 PM
Post by: David on October 12, 2022, 10:29:03 PM
Post by: Adam5 on October 12, 2022, 11:21:12 PM
Post by: SteveC on October 19, 2022, 11:50:24 PM
Post by: David on October 20, 2022, 12:02:15 AM
Ebony today
Post by: MadPlumbarian on October 20, 2022, 12:08:57 AM
JR
Post by: SteveC on October 20, 2022, 01:02:03 AM
Post by: SteveC on October 20, 2022, 01:02:20 AM
Good choices for WHW buddy!
Ebony today
Nice ! :like:
Post by: Adam5 on October 20, 2022, 01:31:08 AM
I think I posted this a loooong time ago, but it was a nice little gift from the Mrs like 15yrs ago, she bought the special sheath to go with it and had it customized, just like she did with the knife itself, I forget the name of the wood it’s like orange zebra wood, but I fell in love with it,
JR
I can see why you fell in love with it :like:
Post by: Adam5 on October 20, 2022, 02:01:04 AM
Good choices for WHW buddy!
Ebony today
I love looking at the knives that you and Steve share pictures of
:drool:
(http://emoticons.datahamster.com/drool.gif)
:cheers:
Post by: toolguy on October 20, 2022, 02:01:35 AM
I almost feel as if these barely make the cut today.
Buck 110 two dot 1972-1980 with genuine Macassar Ebony.
The top knife is Buck's reproduction { Federal }of their own 110 Hunter introduced in 1963.As can be seen,it is considerably smaller in every dimension from the next generations that eventually became the two dot in 1972.
Post by: SteveC on October 20, 2022, 03:09:14 AM
Post by: toolguy on October 20, 2022, 03:47:02 AM
Good to see you tg and nice knives ! :like:
Thanks Steve.
It's been hunting season since the middle of September .I've been bow hunting a friend's farm every day from sunrise to sunset.When I arrive home I'm really tired and haven't spent much time online.
Post by: Gareth on October 26, 2022, 01:28:35 PM
Post by: SteveC on October 26, 2022, 01:40:12 PM
Post by: SteveC on October 26, 2022, 11:15:26 PM
Post by: SteveC on November 02, 2022, 10:23:06 PM
Post by: Antti Lammi on November 02, 2022, 10:26:12 PM
Coco and Spalted BeechNice
Only Tools Matters
Post by: SteveC on November 03, 2022, 04:28:48 AM
Post by: Gareth on November 03, 2022, 03:36:59 PM
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=544490;fs=142079;image)
Post by: nate j on November 03, 2022, 05:09:49 PM
Rosewood.Did you carry the billy club too?
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=544490;fs=142079;image)
Post by: nate j on November 03, 2022, 05:10:43 PM
Post by: Gareth on November 03, 2022, 07:41:17 PM
Nevermind, saw your post in the other thread that you weren’t haha
Yeah, it's not exactly a "pocket tool" I'd have any reason to carry. :D Cool thing to own though.
Post by: Gareth on November 09, 2022, 11:33:54 AM
Post by: SteveC on November 09, 2022, 06:27:16 PM
Post by: SteveC on November 09, 2022, 06:27:29 PM
Post by: HoosierSAKFan on November 09, 2022, 09:40:05 PM
Post by: David on November 10, 2022, 01:36:13 AM
Post by: David on November 10, 2022, 01:37:37 AM
Post by: toolguy on November 10, 2022, 02:49:04 AM
This is a Buck 112 with Desert Ironwood.It was crafted by someone using the moniker of "Norsemen".
(https://forum.multitool.org/index.php?action=dlattach;topic=63570.0;attach=267594)
(https://forum.multitool.org/index.php?action=dlattach;topic=63570.0;attach=267598)
Post by: LoopCutter on November 10, 2022, 04:33:26 AM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on November 10, 2022, 05:28:13 AM
Nice knives all :like: :tu:
Post by: Gareth on November 10, 2022, 12:44:53 PM
Great turnout for WHW !:iagree:
Nice knives all :like: :tu:
Post by: Gareth on November 16, 2022, 01:04:20 PM
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=545052;fs=131609)
Post by: SteveC on November 16, 2022, 01:53:35 PM
Post by: LoopCutter on November 16, 2022, 01:59:51 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
I now see some bolster polishing is on my todo list😉
Post by: SteveC on November 16, 2022, 03:08:05 PM
Post by: LoopCutter on November 16, 2022, 03:16:11 PM
Nice Canoe collection !
Thank you :hatsoff:
My Wood Handle models.
Post by: HoosierSAKFan on November 16, 2022, 03:31:52 PM
Post by: SteveC on November 16, 2022, 08:51:59 PM
Post by: SteveC on November 16, 2022, 08:52:19 PM
Post by: David on November 16, 2022, 11:04:02 PM
Post by: David on November 16, 2022, 11:05:31 PM
Rosewood on a Remington
Great knife. :like:
Post by: SteveC on November 16, 2022, 11:15:02 PM
Bocote and Rosewood
Lovely grain on the May !
Post by: HoosierSAKFan on November 16, 2022, 11:37:16 PM
Nice grain on that one Hoosier ! :tu:Thanks!
Post by: David on November 17, 2022, 12:30:02 AM
Post by: Gareth on November 23, 2022, 10:13:38 AM
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=545424;fs=121470)
Post by: SteveC on November 23, 2022, 01:42:52 PM
Post by: LoopCutter on November 23, 2022, 02:31:14 PM
From the Top
505, 055, 704, Ebony 501, and Rosewood 501
[ This attachment cannot be displayed inline in 'Print Page' view ]
Then also 2 - 703s, I believe one is Ebony, the newer is Walnut but not certain.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Backside of Ebony 501 as front side had been damaged and stained.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on November 23, 2022, 02:42:03 PM
Post by: LoopCutter on November 23, 2022, 03:35:17 PM
My pocket pair for today, required some polishing of the bolsters after breakfast😉❤️
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on November 23, 2022, 04:07:40 PM
Post by: LoopCutter on November 23, 2022, 04:22:29 PM
Great photo, too!
Post by: SteveC on November 23, 2022, 08:30:49 PM
Post by: Gareth on November 23, 2022, 08:40:25 PM
Coco
Lovely. :hatsoff:
Post by: David on November 23, 2022, 10:02:52 PM
Lovely. :hatsoff:
:iagree:
Post by: VICMAN on November 25, 2022, 04:49:27 PM
It is an Eka Swede 82.
Post by: LoopCutter on November 25, 2022, 06:42:53 PM
Very sleek looking with the screws instead of rivets.
Post by: VICMAN on November 25, 2022, 06:54:27 PM
Beautiful knife!
Very sleek looking with the screws instead of rivets.
Thank you LoopCutter! :cheers:
Post by: SteveC on November 26, 2022, 01:47:29 PM
Here is my favorite lock back knife. When I worked at a factory I cut up a lot of cardboard with it.
It is an Eka Swede 82.
:like:
Post by: David on November 26, 2022, 02:55:12 PM
Here is my favorite lock back knife. When I worked at a factory I cut up a lot of cardboard with it.
It is an Eka Swede 82.
:tu:. :like:
Post by: VICMAN on November 26, 2022, 03:15:56 PM
:like:
Thank you Steve! :cheers:
Post by: VICMAN on November 26, 2022, 03:16:37 PM
:tu:. :like:
Thank you David! :cheers:
Post by: SteveC on November 30, 2022, 06:15:13 PM
Post by: Gareth on November 30, 2022, 07:52:26 PM
Ebony and Cocobolo
Nice. 8)
Post by: Gareth on November 30, 2022, 07:53:28 PM
Post by: McStitchy on November 30, 2022, 08:39:39 PM
Ebony and Cocobolo
Some nice contrast in those ebony scales :like:
Post by: McStitchy on November 30, 2022, 08:42:44 PM
Whatever these covers are made of. Thoughts welcome. :D
That's a nice one Gareth :tu:
I'm not a woodologist :D Teak maybe? :dunno:
Post by: McStitchy on November 30, 2022, 08:43:28 PM
(https://i.imgur.com/shCFEHO.jpg)
Post by: SteveC on November 30, 2022, 08:57:58 PM
Nice one Matt !
Whatever these covers are made of. Thoughts welcome. :D
I would say Rosewood or Cocobolo
Post by: David on December 01, 2022, 01:37:17 AM
Nice one Matt !
I would say Rosewood or Cocobolo
:iagree: :D
Post by: Farmer X on December 01, 2022, 02:59:16 AM
Whatever these covers are made of. Thoughts welcome.I'm awlso going with rosewood. Whatever the species, it looks great, as do awl the knives in this thread! :tu:
Post by: Gareth on December 01, 2022, 01:28:46 PM
Post by: McStitchy on December 01, 2022, 05:19:11 PM
Post by: inLine4 on December 02, 2022, 05:52:51 PM
Sent from my iPhone using Tapatalk
Post by: LoopCutter on December 07, 2022, 05:45:17 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Gareth on December 07, 2022, 05:50:45 PM
Post by: LoopCutter on December 07, 2022, 06:01:31 PM
Ebony lambsfoot.That is one BEAUTIFUL EBONY knife Gareth🌹
I am so drawn to that pattern, ❤️❤️❤️
Post by: Gareth on December 07, 2022, 09:47:53 PM
That is one BEAUTIFUL EBONY knife Gareth🌹
I am so drawn to that pattern, ❤️❤️❤️
Cheers LC. They really are a pleasing size and shape. The Ebony is a lovely choice compared to the entry level rosewood. A word of warning though; the finishing on these can be a bit hit-or-miss. All mine have been well assembled, but you want to look out for burrs and whatnot. Blade grinding and sharpening is...variable. My spearpoint with buffalo scales needed quite a bit of work to put a good edge angle on it. This is somewhat reflected in the price though.
Post by: SteveC on December 07, 2022, 09:59:34 PM
Post by: David on December 07, 2022, 11:06:50 PM
Post by: David on December 07, 2022, 11:08:06 PM
Post by: SteveC on December 07, 2022, 11:39:26 PM
Post by: SteveC on December 07, 2022, 11:39:47 PM
Post by: toolguy on December 08, 2022, 12:12:18 AM
Old Spalty
Old Spalty.LOL
This one just seems pedestrian compared to Old Spalty.
One of 62 made by Buck two years ago and sold on their website in their Web Specials section.
It has an S30V DP blade,NS frame with genuine Ebony handles.
Post by: David on December 08, 2022, 01:02:43 AM
Post by: SteveC on December 14, 2022, 08:42:49 PM
Post by: LoopCutter on December 14, 2022, 09:14:33 PM
My selection for a project! That so happens to occur on WHW! :hatsoff:
Post by: David on December 14, 2022, 11:40:08 PM
Desert Ironwood and Ebony
Post by: SteveC on December 15, 2022, 12:52:43 AM
Post by: Farmer X on December 15, 2022, 01:30:52 AM
Walnut, olivewood, and beech...
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on December 15, 2022, 01:51:11 AM
Post by: David on December 15, 2022, 01:55:00 AM
Nice trio Dan ! :like:
:iagree:
Post by: Farmer X on December 16, 2022, 05:54:01 AM
Post by: LoopCutter on December 21, 2022, 06:32:51 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Gareth on December 21, 2022, 07:31:05 PM
Post by: GA1dad on December 21, 2022, 07:58:57 PM
Post by: SteveC on December 21, 2022, 08:54:19 PM
Ebony and Bloodwood
Post by: David on December 22, 2022, 04:28:27 AM
Post by: HoosierSAKFan on December 28, 2022, 02:34:47 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on December 28, 2022, 03:15:37 PM
Post by: LoopCutter on December 28, 2022, 03:27:21 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: HoosierSAKFan on December 28, 2022, 08:12:52 PM
Nice grain, what kind of wood ?WE says it’s Cuibourtia, but I’ve read that it may actually be Guibourtia, or African Rosewood. Whatever it is I really like the looks of it, and it’s a very comfortable knife to use.
Post by: SteveC on December 28, 2022, 11:08:10 PM
Post by: SteveC on December 28, 2022, 11:08:21 PM
WHW
[ This attachment cannot be displayed inline in 'Print Page' view ]
:like:
Post by: SteveC on December 28, 2022, 11:08:38 PM
Post by: HoosierSAKFan on December 28, 2022, 11:36:42 PM
Post by: David on December 29, 2022, 01:20:07 AM
Post by: David on December 29, 2022, 01:26:45 AM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Spalty better get his coat on. It's cold out there. :D
Post by: SteveC on December 29, 2022, 01:49:18 AM
Post by: Gareth on January 02, 2023, 02:49:00 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Awesome photo Steve. :tu:
Post by: MadPlumbarian on January 02, 2023, 03:13:05 PM
JR
Post by: LoopCutter on January 02, 2023, 03:14:38 PM
Post by: Adam5 on January 04, 2023, 11:56:52 AM
(https://i.imgur.com/QoroLnW.jpg)
Post by: SteveC on January 04, 2023, 04:40:49 PM
Post by: SteveC on January 04, 2023, 04:41:11 PM
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=547608;fs=382395)
Post by: LoopCutter on January 04, 2023, 04:49:22 PM
Simple Woodgrain pattern of Canoe
Post by: SteveC on January 04, 2023, 09:14:42 PM
Post by: David on January 04, 2023, 11:06:57 PM
Post by: David on January 04, 2023, 11:08:02 PM
Post by: SteveC on January 04, 2023, 11:16:42 PM
Post by: Adam5 on January 04, 2023, 11:43:25 PM
Post by: LoopCutter on January 05, 2023, 12:05:34 AM
Post by: LoopCutter on January 11, 2023, 04:09:32 PM
Red Wood Grain Buck
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on January 11, 2023, 05:27:42 PM
Post by: SteveC on January 11, 2023, 05:28:09 PM
Post by: Farmer X on January 11, 2023, 11:23:29 PM
I've probably shown this one previously, but since I had it out earlier, I'll show it again. Camillus 1 short line with rosewood.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on January 12, 2023, 12:16:27 AM
WHW
Red Wood Grain Buck
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice one LC! :like:
Post by: David on January 12, 2023, 12:18:17 AM
Ebony, Rosewood and Cocobolo
Good selection of wood for WHW buddy! :tu:
Post by: David on January 12, 2023, 12:18:53 AM
Some beautiful knives for WHW! :tu:
I've probably shown this one previously, but since I had it out earlier, I'll show it again. Camillus 1 short line with rosewood.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Good one Dan! :like:
Post by: David on January 12, 2023, 12:20:10 AM
Post by: SteveC on January 12, 2023, 12:54:30 AM
Post by: Adam5 on January 12, 2023, 01:47:35 AM
Good one Dan! :like:
:iagree: :like:
Post by: Farmer X on January 12, 2023, 07:09:42 PM
Ebony and Desert IronwoodThe etches look just as good as the wood! :like:
Post by: Gareth on January 18, 2023, 11:50:49 AM
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=548249;fs=379695)
Post by: SteveC on January 18, 2023, 01:48:48 PM
Post by: LoopCutter on January 18, 2023, 04:04:36 PM
Trying a size smaller for WHW😉
Post by: Aloha on January 18, 2023, 05:06:28 PM
Everything posted :D. I am very drawn to Osage Orange as usual. ;)
Post by: SteveC on January 18, 2023, 08:10:15 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Trying a size smaller for WHW😉
:tu:
Post by: SteveC on January 18, 2023, 08:10:50 PM
Post by: LoopCutter on January 18, 2023, 08:23:02 PM
Post by: Farmer X on January 18, 2023, 10:16:21 PM
Post by: David on January 18, 2023, 11:04:37 PM
Post by: David on January 18, 2023, 11:08:31 PM
Post by: SteveC on January 18, 2023, 11:22:54 PM
Post by: nate j on January 19, 2023, 05:49:38 AM
Post by: Sos24 on January 19, 2023, 09:06:18 AM
Ebony and Desert IronwoodThat Ironwood Northfield looks amazing
Carried the 303 this morning; switched to the Pony Jack for the afternoon & evening…The Buck 303 is such a nice looking knife.
Post by: Echotech on January 19, 2023, 09:14:49 AM
Post by: SteveC on January 19, 2023, 01:46:03 PM
Post by: Echotech on January 19, 2023, 11:13:29 PM
Post by: LoopCutter on January 20, 2023, 01:40:51 AM
But, it brings up a curious question for this curious mind.
Since you are down under in the land of OZ, and your knife is from the Northern Hemisphere, is your knife actual upright since you and the tree are upside down??? :whistle:
:facepalm:
Be good and hope you are enjoying your summer!
Post by: HarleyXJGuy on January 25, 2023, 02:04:57 AM
(https://uploads.tapatalk-cdn.com/20230119/16811ffbbda519acb73fe6cfafb4127e.jpg)
Never seen one of these before. But after carrying my 110 the last week or so I definitely need a 113 in my life.
Post by: Echotech on January 25, 2023, 03:23:10 AM
Never seen one of these before. But after carrying my 110 the last week or so I definitely need a 113 in my life.:iagree: :like:
I love my 110 and the 113 is awesome
Post by: David on January 25, 2023, 06:07:49 PM
Post by: SteveC on January 25, 2023, 06:10:23 PM
Post by: LoopCutter on January 25, 2023, 09:10:48 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
A 501 and a 703.
Post by: SteveC on January 25, 2023, 09:19:28 PM
Post by: SteveC on January 25, 2023, 09:19:53 PM
Post by: LoopCutter on January 25, 2023, 09:27:09 PM
Post by: Aloha on January 25, 2023, 09:49:44 PM
:facepalm: Yes I'll get my coat and report to the naughty step.
Post by: SteveC on January 25, 2023, 11:36:48 PM
Post by: David on January 26, 2023, 12:27:16 AM
Two Bucks
[ This attachment cannot be displayed inline in 'Print Page' view ]
A 501 and a 703.
:tu:
DIW :D
Dandy Desert Ironwood! :tu:
Post by: toolguy on January 26, 2023, 04:42:59 AM
Nice knives everyone.
Buck 112 Ducks Unlimited Commemorative.
Post by: HarleyXJGuy on January 27, 2023, 02:28:32 AM
This thread has been active today.
Nice knives everyone.
Buck 112 Ducks Unlimited Commemorative.
Beauty.
That 112 is a great size.
Post by: Gareth on February 01, 2023, 11:41:40 AM
Post by: Adam5 on February 01, 2023, 12:11:12 PM
Post by: Adam5 on February 01, 2023, 12:14:38 PM
Cocobolo
(https://i.imgur.com/IrLvxUg.jpg)
Post by: SteveC on February 01, 2023, 01:45:16 PM
Post by: LoopCutter on February 01, 2023, 05:35:52 PM
Post by: SteveC on February 01, 2023, 06:23:12 PM
Post by: SteveC on February 01, 2023, 06:23:45 PM
Post by: LoopCutter on February 01, 2023, 06:37:14 PM
Your two selections for the day are stunning,
My pupils are burning from their exquisite Woodgrain pattern.
Stunning!’!!! :cheers:
Post by: SteveC on February 01, 2023, 08:03:07 PM
Post by: David on February 01, 2023, 10:50:47 PM
Post by: David on February 01, 2023, 10:53:07 PM
A Buck Canoe
Nice! :like:
Cocobolo and Desert Ironwood
Excellent wood for WHW! :tu:
Post by: SteveC on February 01, 2023, 11:01:00 PM
Ebony and Desert Ironwood
Nice ! :tu:
Post by: Farmer X on February 02, 2023, 05:44:44 AM
Post by: LoopCutter on February 08, 2023, 07:36:49 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Imperial Schrade Tobacco Classic and a
Buck Burlwood Canoe…
Canoe is riding in pocket😁
Post by: SteveC on February 08, 2023, 07:41:15 PM
Post by: LoopCutter on February 08, 2023, 07:43:42 PM
Post by: SteveC on February 08, 2023, 08:15:42 PM
Post by: Gareth on February 08, 2023, 10:21:39 PM
I selected two this morning,
[ This attachment cannot be displayed inline in 'Print Page' view ]
Imperial Schrade Tobacco Classic and a
Buck Burlwood Canoe…
Canoe is riding in pocket😁
Love that Tobacco knife LC. :drool:
Post by: LoopCutter on February 09, 2023, 08:05:10 PM
Love that Tobacco knife LC. :drool:
Thank you :hatsoff: Gareth
It is an elegant Equal Ended pattern. Almost ignore adding to carry option as I do not want it to get scratch :twak:
FYI, some research revealed it is a Imperial Shrade made knife.
Post by: LoopCutter on February 15, 2023, 04:08:21 PM
Brazilian Cherry on Beaver Tail
And
Plain Woodgrain scales on a Canoe
Two for WHW👍
Post by: SteveC on February 15, 2023, 09:03:31 PM
Post by: David on February 15, 2023, 10:29:51 PM
Ebony and Sucker Rod
Post by: SteveC on February 15, 2023, 10:48:38 PM
Post by: Sos24 on February 16, 2023, 02:40:58 AM
After taking the first pic, I wanted to highlight the Cripple Creek Buffalo
(https://uploads.tapatalk-cdn.com/20230216/46886cd3bebe2b08e60586921fff88ce.jpg)
(https://uploads.tapatalk-cdn.com/20230216/9af856f423efec95a3002fe1f44e8145.jpg)
Post by: SteveC on February 16, 2023, 05:45:38 AM
Post by: SteveC on February 22, 2023, 03:47:19 PM
Post by: LoopCutter on February 22, 2023, 04:16:56 PM
Spalted Beech and BloodwoodI can not get enough of the Spalted Beech, is it the only Spalted model you own?
And, the Whittler is a beauty!😉
Post by: SteveC on February 22, 2023, 04:18:02 PM
I can not get enough of the Spalted Beech, is it the only Spalted model you own?
And, the Whittler is a beauty!😉
Thanks and Yes it's my only one . :cheers:
You can get one here if you are interested ;)
https://www.moonrakerknives.co.uk/folding-knives/stabilized-spalted-beech-71?mfp=manufacturers%5B155%5D
Post by: LoopCutter on February 23, 2023, 01:43:33 AM
Beech (red stained to appear like original mahogany handles)
And a Tobacco Schrade…
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: LoopCutter on February 23, 2023, 02:22:14 AM
Thank you
Thanks and Yes it's my only one . :cheers:
You can get one here if you are interested ;)
https://www.moonrakerknives.co.uk/folding-knives/stabilized-spalted-beech-71?mfp=manufacturers%5B155%5D
With exchange rate those are a nice value at present. 👍
Post by: Sos24 on February 23, 2023, 05:12:32 AM
Not my carry, yet two I like…Nice Schrade
Beech (red stained to appear like original mahogany handles)
And a Tobacco Schrade…
[ This attachment cannot be displayed inline in 'Print Page' view ]
I can not get enough of the Spalted Beech, is it the only Spalted model you own?:agree: the spalted beech is gorgeous.
And, the Whittler is a beauty!
Post by: Sos24 on February 23, 2023, 05:13:02 AM
(https://uploads.tapatalk-cdn.com/20230223/d88fb40e96b3b2a9da75cf4b362b0062.jpg)
Post by: LoopCutter on February 23, 2023, 05:19:00 AM
A Bark River EssentialHow do you choose between that beautiful skinner or your custom Ranger 113 :dunno:
(https://uploads.tapatalk-cdn.com/20230223/d88fb40e96b3b2a9da75cf4b362b0062.jpg)
I could stare at either one for half the day or both awl day :whistle: :cheers:
Post by: SteveC on February 23, 2023, 05:31:04 AM
Not my carry, yet two I like…
Beech (red stained to appear like original mahogany handles)
And a Tobacco Schrade…
[ This attachment cannot be displayed inline in 'Print Page' view ]
:like: :tu:
Post by: SteveC on February 23, 2023, 05:31:25 AM
A Bark River Essential
(https://uploads.tapatalk-cdn.com/20230223/d88fb40e96b3b2a9da75cf4b362b0062.jpg)
Really nice ! :tu:
Post by: Sos24 on February 23, 2023, 07:15:10 AM
How do you choose between that beautiful skinner or your custom Ranger 113 :dunno:
I could stare at either one for half the day or both awl day :whistle: :cheers:
It is a hard choice, but the nice thing is that both are great knives and a joy to use.
The Essential is a little smaller than the 113, so it is more if I want to edc out in town or not anticipating much carry. The 113 is if I want more blade, especially for outdoor use.
Really nice ! :tu:Thanks.
Post by: Adam5 on March 01, 2023, 12:03:05 PM
(https://i.imgur.com/dGZH2m5.jpg)
Post by: Gareth on March 01, 2023, 12:09:47 PM
Post by: Gareth on March 01, 2023, 12:11:16 PM
Post by: SteveC on March 01, 2023, 08:18:06 PM
Is it rosewood or walnut? I think rosewood, but I am no expert.
(https://i.imgur.com/dGZH2m5.jpg)
Or it could be Cocobolo. Rosewood doesn't get as dark as it ages whereas Coco will get quite dark where you can't really see the grain anymore.
Post by: SteveC on March 01, 2023, 08:18:47 PM
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=550199;fs=390894;image)
Post by: LoopCutter on March 01, 2023, 09:17:27 PM
Post by: nate j on March 01, 2023, 10:12:02 PM
Post by: SteveC on March 01, 2023, 11:08:38 PM
Post by: Gareth on March 02, 2023, 12:58:28 AM
Robert Klaas Folding Hunter for WHW…
Ooh, that's very pretty. :tu:
Post by: Adam5 on March 02, 2023, 01:14:54 AM
Very nice Steve👍
:iagree: with Gordon :tu:
Post by: Adam5 on March 02, 2023, 01:15:56 AM
Nice burl on that one !
Yes, the burl looks fantastic :like: :like:
Post by: Sos24 on March 02, 2023, 02:36:24 AM
(https://uploads.tapatalk-cdn.com/20230302/a0179c95e19116cade80c319671b6a23.jpg)
Post by: LoopCutter on March 02, 2023, 02:48:27 AM
:iagree: with Gordon :tu:
:iagree: with Gareth too!
Post by: Farmer X on March 02, 2023, 05:46:24 AM
I'm overdue for a contribution, so here you go. Robeson, Camillus, and Case electrician's knives, awl with wood handles. The Case is walnut; I'm not sure about the Robeson and the Cammie.
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on March 02, 2023, 01:32:36 PM
Post by: Farmer X on March 03, 2023, 12:08:14 AM
Post by: Adam5 on March 03, 2023, 02:37:04 AM
Some real beauties for WHW, y'awl! :tu:
I'm overdue for a contribution, so here you go. Robeson, Camillus, and Case electrician's knives, awl with wood handles. The Case is walnut; I'm not sure about the Robeson and the Cammie.
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
This post deserves a proper response:
(https://emoticons.datahamster.com/ban-cha.gif) :woohoo: (https://emoticons.datahamster.com/ban-cha.gif)
Post by: Farmer X on March 03, 2023, 05:02:54 AM
Post by: Gareth on March 08, 2023, 12:12:52 PM
Post by: SteveC on March 08, 2023, 01:44:15 PM
Post by: LoopCutter on March 09, 2023, 01:33:41 AM
Pal Cutlery produced the electrician
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on March 09, 2023, 03:14:24 AM
Post by: Gareth on March 09, 2023, 02:28:05 PM
Very nice LC ! :like::iagree:
Post by: Farmer X on March 12, 2023, 11:58:50 AM
Post by: SteveC on March 15, 2023, 05:26:34 PM
Ironwood on Walnut on Teak
Post by: LoopCutter on March 15, 2023, 06:25:07 PM
Two simple and dependable cutters.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Gareth on March 15, 2023, 07:58:36 PM
Post by: Farmer X on March 16, 2023, 04:29:15 AM
Post by: Sos24 on March 16, 2023, 04:58:46 AM
I went with some Birdseye maple and oak
(https://uploads.tapatalk-cdn.com/20230316/3e08204c001a1b4aa72a151ef571675e.jpg)
Post by: LoopCutter on March 16, 2023, 10:47:41 AM
The square edge bolster combined with a Rounded on the Oak are also unique.
A trapper pattern?
Post by: Sos24 on March 16, 2023, 11:50:01 AM
:like: Is the Maple a Scout Pattern? Or a version Victorinox?The Maple is a SAK Compact and the oak is a center swell Jack.
The square edge bolster combined with a Rounded on the Oak are also unique.
A trapper pattern?
Post by: SteveC on March 16, 2023, 12:36:59 PM
There are some beauties being carried today.
I went with some Birdseye maple and oak
(https://uploads.tapatalk-cdn.com/20230316/3e08204c001a1b4aa72a151ef571675e.jpg)
A couple of beauties ! :tu:
Post by: Adam5 on March 22, 2023, 11:11:34 AM
(https://i.imgur.com/o26jbES.jpg)
Post by: SteveC on March 22, 2023, 12:43:04 PM
Ebony
(https://i.imgur.com/o26jbES.jpg)
:like: :tu:
Post by: Gareth on March 22, 2023, 01:13:26 PM
Post by: SteveC on March 22, 2023, 02:08:28 PM
Post by: Adam5 on March 22, 2023, 02:09:15 PM
Post by: LoopCutter on March 22, 2023, 02:24:55 PM
Both trappers, both wood.
GEC is Brazilian Cherry.
Case is a Curly Maple. (Better enjoyed from back side😉)
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Both are on display, on fireplace mantle😎
Post by: SteveC on March 22, 2023, 10:11:36 PM
Post by: SteveC on March 22, 2023, 10:11:52 PM
Post by: nate j on March 23, 2023, 02:35:23 AM
Post by: LoopCutter on March 23, 2023, 02:45:59 AM
Pony Jack😎
Post by: nate j on March 23, 2023, 04:22:03 AM
Very nice, Nate j!:salute:
Pony Jack
Post by: SteveC on March 23, 2023, 04:30:11 AM
Post by: Sos24 on March 23, 2023, 09:41:24 AM
Two big’ems for WHW.Very nice curly maple, then again I love almost all maple.
Both trappers, both wood.
GEC is Brazilian Cherry.
Case is a Curly Maple. (Better enjoyed from back side)
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Both are on display, on fireplace mantle
Post by: Sos24 on March 23, 2023, 09:42:00 AM
(https://uploads.tapatalk-cdn.com/20230323/da2b98cd5f2523a0547c093302b49984.jpg)
Post by: SteveC on March 23, 2023, 12:41:48 PM
Post by: Gareth on March 23, 2023, 10:32:30 PM
In the woods for WHW…
Love those Pony Jacks. :tu:
Post by: LoopCutter on March 29, 2023, 08:16:22 PM
The non shield side, of two dependable traditionals, a Canoe and pen knife.
Post by: Gareth on March 29, 2023, 08:24:08 PM
Rosewood Sheepsfoot.
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=551369;fs=177161;image)
Post by: LoopCutter on March 29, 2023, 08:27:50 PM
Must be allergic to Rosewood :facepalm: My eyes are watering!!!
Those are just two luv’ly to look upon with tears forming :cheers:
Post by: Gareth on March 29, 2023, 08:37:51 PM
Post by: SteveC on March 29, 2023, 08:56:18 PM
Post by: SteveC on March 29, 2023, 08:56:34 PM
Post by: LoopCutter on March 29, 2023, 09:24:24 PM
Here's a thing that I've owned for about 6 years but I admit it's not something I use. They do have wood handles though. :D Early 20th Century (I believe) and commonly known as "campaign cutlery".
That is so cool!
My Great Uncle (grandfather’s youngest brother) had the same item! His story it was given to him by an English officer he encountered in North Africa during WW2, provided some rations and petro when their paths crossed before my My Uncle Fritz moved across to Sicily! He told some good tales, thought he actually picked it up while England before returning state side.
IIRC, the handles were much darker than yours. Only saw them a couple of times, he passed away before my GF, but he and Aunt Helen had no children, so no sure what became of his interesting items. 🙄
Post by: LoopCutter on March 29, 2023, 09:27:08 PM
EbonyI may have said this before, but, the wood grain pattern on the upper knife is amazingly stunning.
Post by: Gareth on March 30, 2023, 12:28:52 AM
That is so cool!
My Great Uncle (grandfather’s youngest brother) had the same item! His story it was given to him by an English officer he encountered in North Africa during WW2, provided some rations and petro when their paths crossed before my My Uncle Fritz moved across to Sicily! He told some good tales, thought he actually picked it up while England before returning state side.
IIRC, the handles were much darker than yours. Only saw them a couple of times, he passed away before my GF, but he and Aunt Helen had no children, so no sure what became of his interesting items. 🙄
Great to have that kind of family story LC. :tu:
Post by: David on March 30, 2023, 12:40:25 AM
Post by: SteveC on March 30, 2023, 12:57:07 AM
I may have said this before, but, the wood grain pattern on the upper knife is amazingly stunning.
Thanks !
Post by: Farmer X on March 30, 2023, 06:17:14 AM
Post by: SteveC on April 05, 2023, 08:55:18 PM
Post by: Gareth on April 05, 2023, 09:08:40 PM
Run-of-the-mill Ebony for me today. :D
Post by: David on April 05, 2023, 10:17:07 PM
Post by: David on April 05, 2023, 10:20:43 PM
Post by: LoopCutter on April 05, 2023, 10:22:51 PM
An English Jack compared to a Case Trapper
Post by: SteveC on April 05, 2023, 11:32:28 PM
Those spalted covers are very eye caching Steve. :hatsoff:
Run-of-the-mill Ebony for me today. :D
Nothing run of the mil about Ebony ! :like: :tu:
Post by: Farmer X on April 07, 2023, 01:39:11 AM
Post by: SteveC on April 12, 2023, 07:58:25 PM
Ebony and Osage Orange
Post by: GA1dad on April 13, 2023, 01:32:10 AM
On a side note,
I purchased this unused, still in package Craftsman tool bag at the fleamarket a couple of months back. I took it out of it's packaging to use it this week and found the original receipt in it,,,, from 2004,,,,, pretty sweet!
Post by: SteveC on April 13, 2023, 05:59:27 AM
Post by: Adam5 on April 19, 2023, 12:06:51 PM
(https://i.imgur.com/Xv2h7mj.jpg)
Post by: Gareth on April 19, 2023, 12:24:43 PM
Post by: LoopCutter on April 19, 2023, 04:08:00 PM
New to me (top) Spalted Beech. Bottom same knife. Comparison with a Buck Saunter in Carbon Fiber.
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on April 19, 2023, 04:16:04 PM
Bloodwood
Post by: LoopCutter on April 19, 2023, 04:28:29 PM
And across a Wooden cup too! 😎
Can we see more of the cup? Luv carved utensils and bowls and such. My wife did too!, as I have a large assortment of kitchen tools she collected, hand picking each because of wood grain as well as purpose. 😢🌹
Post by: Farmer X on April 20, 2023, 08:13:04 AM
Post by: Adam5 on April 26, 2023, 02:04:29 PM
(https://i.imgur.com/dKAmPkH.jpg)
Post by: LoopCutter on April 26, 2023, 04:29:06 PM
Cocobolo?
(https://i.imgur.com/dKAmPkH.jpg)
Very nice 👍
This morning, a Schrade Tobacco knife is only wood in reach. Sharing the sun with a simple GEC Barlow, a sharp pair 😁
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Gareth on April 26, 2023, 07:31:20 PM
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=552648;fs=212087)
Post by: SteveC on April 26, 2023, 10:44:23 PM
Post by: SteveC on April 26, 2023, 10:44:46 PM
Post by: Farmer X on April 27, 2023, 05:55:38 AM
Some beech and olivewood...
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on April 27, 2023, 01:39:57 PM
Post by: LoopCutter on April 27, 2023, 01:48:12 PM
Great choices for WHW, y'awl! :tu:
Some beech and olivewood...
[ This attachment cannot be displayed inline in 'Print Page' view ]
Olive wood is an attractive handle.
AWL 3 are nice!!!
Post by: Gareth on April 27, 2023, 07:54:37 PM
Great choices for WHW, y'awl! :tu:
Some beech and olivewood...
[ This attachment cannot be displayed inline in 'Print Page' view ]
I've not carried an Opinel in forever! Must dig one or two out soon.
Post by: Farmer X on April 28, 2023, 09:24:01 AM
Post by: LoopCutter on May 03, 2023, 05:34:01 PM
Spalted Beech top and Rosewood below.
Post by: SteveC on May 03, 2023, 08:56:10 PM
Walnut and Cocobolo for me :tu:
Post by: Gareth on May 03, 2023, 09:37:49 PM
Post by: David on May 03, 2023, 09:46:04 PM
Post by: Farmer X on May 04, 2023, 05:55:57 AM
Post by: Antti Lammi on May 10, 2023, 08:02:36 PM
(https://uploads.tapatalk-cdn.com/20230510/0731a7a67339031ec24992ef79ed5dae.jpg)
Only Tools Matters
Post by: SteveC on May 10, 2023, 08:25:55 PM
Post by: SteveC on May 10, 2023, 08:27:23 PM
Post by: Adam5 on May 10, 2023, 08:42:30 PM
Post by: Adam5 on May 10, 2023, 08:43:03 PM
(https://i.imgur.com/kKQUlYu.jpg)
Post by: Antti Lammi on May 10, 2023, 09:44:41 PM
Iron and BloodThose looks awesome Steve
Only Tools Matters
Post by: Antti Lammi on May 10, 2023, 09:45:10 PM
CocoboloGreat choice Adam
(https://i.imgur.com/kKQUlYu.jpg)
Only Tools Matters
Post by: nate j on May 11, 2023, 03:38:27 AM
Post by: LoopCutter on May 11, 2023, 03:40:19 AM
Post by: SteveC on May 11, 2023, 03:46:17 AM
Nice GEC'S fellas 👍🏻
Post by: Farmer X on May 11, 2023, 05:55:35 AM
Great turnout today!:iagree:
Post by: Gareth on May 14, 2023, 03:17:34 PM
Cocobolo
(https://i.imgur.com/kKQUlYu.jpg)
Such a good looking knife there Adam. :tu:
Post by: Adam5 on May 14, 2023, 03:55:41 PM
Post by: Adam5 on May 17, 2023, 12:20:15 PM
(https://i.imgur.com/AiVxpgu.jpg)
Post by: SteveC on May 17, 2023, 01:25:14 PM
Post by: Adam5 on May 17, 2023, 02:35:57 PM
Post by: HoosierSAKFan on May 17, 2023, 03:10:47 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: LoopCutter on May 17, 2023, 03:53:14 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
And, my carry today is
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on May 17, 2023, 06:27:09 PM
Post by: SteveC on May 17, 2023, 07:57:07 PM
Post by: LoopCutter on May 17, 2023, 08:05:25 PM
Both are very very nice!
Post by: Aloha on May 17, 2023, 10:13:56 PM
Imperial Frontier 4435
Post by: nate j on May 18, 2023, 05:56:09 AM
Post by: Farmer X on May 18, 2023, 06:12:43 AM
Post by: LoopCutter on May 24, 2023, 06:27:43 PM
Burlwood Stockman and a Spalted Beech Lamb
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on May 24, 2023, 06:47:02 PM
Post by: SteveC on May 24, 2023, 08:27:26 PM
Post by: David on May 25, 2023, 01:45:52 AM
Post by: nate j on May 25, 2023, 05:02:33 AM
Post by: Farmer X on May 25, 2023, 06:01:30 AM
Nice wood today fellas :like::iagree:
Post by: Adam5 on May 25, 2023, 11:53:50 AM
So, here is my contribution to WHW on Thursday :D
(https://i.imgur.com/nmFc7Ps.jpg)
Kutmaster, Camillus, Schrade Walden
Post by: SteveC on May 25, 2023, 01:40:34 PM
Post by: LoopCutter on May 31, 2023, 03:58:44 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on May 31, 2023, 08:54:04 PM
Post by: SteveC on May 31, 2023, 08:54:20 PM
Post by: Adam5 on May 31, 2023, 10:04:44 PM
(https://i.imgur.com/Vd1iZOe.jpg)
I forgot to take different photo for this thread :twak:
Post by: SteveC on May 31, 2023, 10:36:45 PM
Ebony
(https://i.imgur.com/Vd1iZOe.jpg)
I forgot to take different photo for this thread :twak:
No worries :like:
Post by: David on June 01, 2023, 01:18:15 AM
Post by: Gareth on June 01, 2023, 01:33:32 AM
Post by: LoopCutter on June 01, 2023, 01:57:58 AM
Post by: nate j on June 01, 2023, 03:03:35 AM
Post by: SteveC on June 01, 2023, 04:32:27 AM
Post by: Farmer X on June 01, 2023, 09:16:51 AM
Post by: WaynejG on June 01, 2023, 08:08:23 PM
Sent from my SM-G998B using Tapatalk
Post by: Farmer X on June 03, 2023, 05:15:25 AM
Post by: SurgeUk on June 07, 2023, 05:35:35 PM
I used the scissors to remove a price tag on a lightweight jacket. I'd never noticed the serrated blade until now, despite having read about it several times (I think I just imagined it being more...serrated :shrug:) ::)
Post by: SteveC on June 07, 2023, 08:54:37 PM
Post by: SteveC on June 07, 2023, 08:55:05 PM
Post by: LoopCutter on June 07, 2023, 11:18:14 PM
Could not sit by, so doing a comparison with one of those Red sharp things, a pocket pal, next to my Robeson Senator (?)
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Which one is prettier?
Which one has character?
Which one has charm?
Just thinking 🤔
Post by: LoopCutter on June 07, 2023, 11:21:34 PM
Now I am feeling really bitter seeing how pretty yours is, against the Ebony. 😒
Those are a super nice pair Steve, really are😉
Post by: SurgeUk on June 07, 2023, 11:25:50 PM
Ebony and Cocobolo
Those are both lovely examples :2tu: :dd:
Post by: SteveC on June 07, 2023, 11:49:26 PM
Post by: David on June 08, 2023, 01:58:01 AM
Post by: David on June 08, 2023, 03:22:52 AM
Post by: SteveC on June 08, 2023, 04:31:52 AM
Post by: Farmer X on June 08, 2023, 05:50:18 AM
Post by: Aloha on June 09, 2023, 04:14:05 PM
Post by: SteveC on June 14, 2023, 08:05:21 PM
Post by: Adam5 on June 15, 2023, 02:32:43 AM
Post by: Adam5 on June 15, 2023, 02:33:37 AM
(https://i.imgur.com/7IU9Ogd.jpg)
Post by: Farmer X on June 15, 2023, 05:55:08 AM
Olivewood on a cedar backdrop...
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on June 15, 2023, 01:15:48 PM
Post by: Farmer X on June 16, 2023, 12:39:06 AM
Post by: Adam5 on June 16, 2023, 01:12:11 AM
Post by: Farmer X on June 16, 2023, 04:55:23 AM
Post by: Adam5 on June 21, 2023, 11:58:45 AM
(https://i.imgur.com/DPmUv1j.jpg)
Post by: SteveC on June 21, 2023, 01:36:39 PM
Post by: SteveC on June 21, 2023, 10:48:42 PM
Post by: Farmer X on June 22, 2023, 06:14:45 AM
Post by: Adam5 on June 22, 2023, 12:14:14 PM
Ironwood and Ebony
:2tu:
Post by: NutSAK on June 28, 2023, 05:39:32 PM
(https://live.staticflickr.com/65535/53008577543_98ea479385_o.jpg)
Post by: SteveC on June 28, 2023, 06:12:14 PM
Post by: SteveC on June 28, 2023, 06:12:42 PM
Post by: David on June 28, 2023, 09:27:36 PM
Spalted Beech and Bloodwood
That wood looks good together! :like:
Post by: David on June 28, 2023, 10:02:47 PM
Post by: SteveC on July 05, 2023, 08:55:08 PM
Post by: Farmer X on July 06, 2023, 04:24:35 AM
Post by: SteveC on July 12, 2023, 08:31:08 PM
Post by: Sos24 on July 13, 2023, 05:15:48 AM
(https://uploads.tapatalk-cdn.com/20230713/642512693ffd523e41ce4386410c66bd.jpg)
Post by: SteveC on July 13, 2023, 05:45:48 AM
Post by: SteveC on July 19, 2023, 08:17:14 PM
Walnut for WHW !
Post by: nate j on July 20, 2023, 05:24:12 AM
Post by: SteveC on July 20, 2023, 01:22:34 PM
Post by: nakken on July 20, 2023, 10:50:21 PM
Cannot believe I missed my first WHW
Olive tree and cured reindeer
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on July 20, 2023, 11:20:46 PM
Post by: nate j on July 21, 2023, 04:54:04 AM
:like:That looks tasty. And the knife doesn’t look bad either.
Cannot believe I missed my first WHW
Olive tree and cured reindeer
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: NutSAK on July 21, 2023, 05:10:17 AM
Post by: Farmer X on July 21, 2023, 05:29:43 AM
Post by: nakken on July 21, 2023, 04:19:49 PM
Post by: SteveC on August 02, 2023, 04:53:37 PM
Post by: DIAMOND on August 02, 2023, 05:50:48 PM
Here is my little Opie.
. reshaped handle (flatter), also sanded, stained and varnished
. DIY pocket clip
. I made carved an indention in the handle to make blade deployment easier
Side note: This is my second Opinel. My first one I found while hiking the Grand Canyon back in the mid 80's. There was a little stream with some branches laying in it. One of the "branches" had a "designed" look. I reached down and picked up what I discovered was a mud-filled knife. After some cleaning and research, I discovered I had found a little treasure. Many years later, I gifted it to my son.
Post by: nate j on August 03, 2023, 01:57:47 AM
Wow, some nice entries in this thread. :like:Nice job making that Opie your own!
Here is my little Opie.
. reshaped handle (flatter), also sanded, stained and varnished
. DIY pocket clip
. I made carved an indention in the handle to make blade deployment easier
Side note: This is my second Opinel. My first one I found while hiking the Grand Canyon back in the mid 80's. There was a little stream with some branches laying in it. One of the "branches" had a "designed" look. I reached down and picked up what I discovered was a mud-filled knife. After some cleaning and research, I discovered I had found a little treasure. Many years later, I gifted it to my son.
Sent from my iPhone using Tapatalk
Post by: nate j on August 03, 2023, 01:58:10 AM
Post by: DIAMOND on August 03, 2023, 02:26:03 AM
Nice job making that Opie your own!
Thanks!
I enjoy the Opinel knives. Customizing it was fun and simple.
Post by: DIAMOND on August 03, 2023, 02:27:06 AM
Ironwood
Bucks hold a special place in my heart. That's a beaut!
Post by: Farmer X on August 03, 2023, 04:42:15 AM
Post by: Adam5 on August 03, 2023, 05:55:59 PM
Post by: LoopCutter on August 09, 2023, 03:53:10 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Spalted Beech and Robeson Shurwood😉
Post by: DIAMOND on August 09, 2023, 03:59:05 PM
Post by: NutSAK on August 09, 2023, 04:26:31 PM
(https://live.staticflickr.com/65535/53105004648_d87b45be23_h.jpg)
Post by: DIAMOND on August 09, 2023, 04:40:02 PM
Post by: Barry Rowland on August 09, 2023, 04:58:05 PM
Post by: SteveC on August 09, 2023, 06:33:32 PM
Nice ones fellas ! :like:
Post by: DIAMOND on August 09, 2023, 06:59:55 PM
And I'll take a Carbone Opie any day!
Post by: SteveC on August 09, 2023, 08:37:02 PM
Post by: NutSAK on August 09, 2023, 08:55:55 PM
Post by: Farmer X on August 10, 2023, 07:22:56 AM
Post by: Barry Rowland on August 11, 2023, 02:09:43 AM
Post by: NutSAK on August 16, 2023, 04:06:09 PM
(https://live.staticflickr.com/65535/53120862705_d0483e3a9c_h.jpg)
Post by: LoopCutter on August 16, 2023, 04:33:52 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Each side unique, same wood, beech.
Post by: Barry Rowland on August 16, 2023, 05:13:42 PM
Post by: Barry Rowland on August 16, 2023, 05:14:13 PM
Post by: DIAMOND on August 16, 2023, 07:05:24 PM
And that No. 12 is huge. :o
Post by: LoopCutter on August 16, 2023, 07:29:56 PM
The No. 12A sword, a French short sword!😉
Post by: DIAMOND on August 16, 2023, 07:41:21 PM
A sword, a French short sword!😉
Je suis certainement d'accord avec vous
Show content
Translation: I definitely agree with you
Post by: SteveC on August 16, 2023, 08:49:06 PM
English Oak and Ebony
Post by: DIAMOND on August 17, 2023, 12:22:45 PM
Post by: Farmer X on August 18, 2023, 06:26:46 AM
Post by: LoopCutter on August 23, 2023, 04:13:23 PM
Just like a Canoe in wood
Both sides now!
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on August 23, 2023, 04:47:56 PM
Post by: SteveC on August 23, 2023, 04:48:27 PM
Post by: LoopCutter on August 23, 2023, 05:15:42 PM
Post by: DIAMOND on August 23, 2023, 05:24:09 PM
Post by: SteveC on August 24, 2023, 04:15:18 AM
Post by: Farmer X on August 24, 2023, 06:18:06 AM
Post by: SteveC on August 24, 2023, 01:33:41 PM
Post by: LoopCutter on August 24, 2023, 03:51:26 PM
Post by: Barry Rowland on August 28, 2023, 06:18:52 PM
Je suis certainement d'accord avec vousShow contentTranslation: I definitely agree with you
Post by: LoopCutter on August 30, 2023, 04:55:44 PM
No. 06 is the blade
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: DIAMOND on August 30, 2023, 06:00:00 PM
Walnut is the wood!:like:
No. 06 is the blade
No. 08 is the blade
Walnut is the stain! ;)
Post by: SteveC on August 30, 2023, 06:11:55 PM
Post by: DIAMOND on August 30, 2023, 06:27:42 PM
I sanded the handle thinner, stained and varnished, added a diy pocket clip and removed a little handle material by the nail nick.
Post by: NutSAK on August 30, 2023, 06:33:38 PM
(https://live.staticflickr.com/65535/53153296068_3ec17e5955_h.jpg)
Post by: LoopCutter on August 30, 2023, 08:05:01 PM
@NutSak- 2 very sharp looking carry models in Ebony.
Post by: DIAMOND on August 30, 2023, 08:52:52 PM
:like: yours upgrades Diamond 👍
Thanks! It was a fun project.
Post by: SteveC on August 30, 2023, 10:29:23 PM
Post by: SteveC on August 30, 2023, 10:29:42 PM
Post by: David on August 30, 2023, 11:08:32 PM
A couple of my favorites today, both in ebony. Shuffler and Conductor.
(https://live.staticflickr.com/65535/53153296068_3ec17e5955_h.jpg)
Some sweet Ebony! :like:
Oak and Bloodwood
Nice wood for WW! :like:
Post by: SteveC on August 30, 2023, 11:16:49 PM
Post by: nate j on August 31, 2023, 01:32:06 AM
Post by: Farmer X on August 31, 2023, 05:50:02 AM
Post by: DIAMOND on August 31, 2023, 01:04:58 PM
Ebony
Beautiful lockback!
Post by: Barry Rowland on September 06, 2023, 06:02:20 PM
Post by: LoopCutter on September 06, 2023, 07:41:40 PM
N.06 walnut
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on September 06, 2023, 08:24:01 PM
Post by: SteveC on September 06, 2023, 08:24:25 PM
Post by: NutSAK on September 07, 2023, 12:01:41 AM
(https://live.staticflickr.com/65535/53169531944_5ecb246d59_h.jpg)
Post by: NutSAK on September 07, 2023, 12:03:03 AM
Happy WH Wednesday everyone!! No. 5.
Is the No. 5 the largest Opinel without the Virobloc?
Post by: SteveC on September 07, 2023, 12:36:50 AM
Post by: nate j on September 07, 2023, 12:49:57 AM
Is the No. 5 the largest Opinel without the Virobloc?Yes
Post by: LoopCutter on September 07, 2023, 02:06:22 AM
Is the No. 5 the largest Opinel without the Virobloc?And N.06 is the smallest with the lock!😉
Post by: NutSAK on September 07, 2023, 03:08:47 AM
Post by: Farmer X on September 07, 2023, 05:23:51 AM
Post by: Gareth on September 13, 2023, 01:25:24 PM
Post by: SteveC on September 13, 2023, 01:39:54 PM
Got to love the detailed description of "hardwood" :D
Better than softwood :D
Post by: Gareth on September 13, 2023, 01:50:01 PM
Better than softwood :D
This is true. :like:
Post by: SteveC on September 13, 2023, 08:55:28 PM
Post by: SteveC on September 20, 2023, 09:17:41 PM
Post by: SteveC on September 20, 2023, 09:18:04 PM
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=559060;fs=416533)
Post by: David on September 20, 2023, 10:56:08 PM
Desert Ironwood
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=559060;fs=416533)
:drool: :like:
Post by: David on September 20, 2023, 10:57:11 PM
Post by: SteveC on September 23, 2023, 01:05:40 AM
Post by: SteveC on September 27, 2023, 08:18:45 PM
Post by: David on September 27, 2023, 10:28:10 PM
Post by: David on September 27, 2023, 10:29:51 PM
Post by: SteveC on September 27, 2023, 11:21:16 PM
Post by: Farmer X on September 28, 2023, 05:59:38 AM
Here's some olivewood and...cocobolo?
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SurgeUk on September 28, 2023, 11:03:09 AM
Great choices for WHW, Steve and David! :like:
Here's some olivewood and...cocobolo?
[ This attachment cannot be displayed inline in 'Print Page' view ]
:like: :tu:
Post by: SteveC on September 28, 2023, 01:38:32 PM
Great choices for WHW, Steve and David! :like:
Here's some olivewood and...cocobolo?
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice pair Dan !
Post by: Farmer X on October 01, 2023, 02:34:12 AM
Post by: Gareth on October 04, 2023, 01:00:02 PM
Post by: SteveC on October 04, 2023, 05:49:28 PM
Post by: SteveC on October 04, 2023, 08:44:07 PM
Curly Gidgee and Rosewood
Post by: David on October 04, 2023, 11:38:10 PM
Post by: David on October 04, 2023, 11:40:52 PM
Post by: Gareth on October 04, 2023, 11:57:33 PM
:woohoo:
Curly Gidgee and Rosewood
Very nice Steve. I've got a traditional boomerang made out of gidgee and it is one SOLID piece of wood. I know for sure I wouldn't want it flying towards me.
Post by: SteveC on October 05, 2023, 04:13:47 AM
Very nice Steve. I've got a traditional boomerang made out of gidgee and it is one SOLID piece of wood. I know for sure I wouldn't want it flying towards me.
Thanks Gareth :hatsoff:
I'd love to see a picture of it .
Post by: Gareth on October 05, 2023, 01:25:39 PM
Thanks Gareth :hatsoff:
I'd love to see a picture of it .
It's a beast. There's a name and other details on it (how I know it's gidgee) and found out it was made around 25-30 years ago.
I have to admit that I've never thrown it. :-[
a) I don't what it to get away from me and clobber someone else at the park.
b) it might actually turn around and come back! :ahhh
Post by: Gareth on October 05, 2023, 01:38:51 PM
Post by: Adam5 on October 06, 2023, 01:24:32 AM
:woohoo:
Curly Gidgee and Rosewood
The Gidgee-handled knife is a real looker :o :like:
Post by: Adam5 on October 06, 2023, 01:25:44 AM
(https://i.imgur.com/sb5OXdr.jpg)
Post by: SteveC on October 06, 2023, 02:34:25 AM
It's a beast. There's a name and other details on it (how I know it's gidgee) and found out it was made around 25-30 years ago.
I have to admit that I've never thrown it. :-[
a) I don't what it to get away from me and clobber someone else at the park.
b) it might actually turn around and come back! :ahhh
Very cool ! 😎
A fresher photo of the Hartkopf pocket knife.
Nice !
Walnut (sorry it is a day late :-[ )
(https://i.imgur.com/sb5OXdr.jpg)
Nice Opie !
Post by: nate j on October 11, 2023, 10:58:41 PM
Post by: SteveC on October 11, 2023, 11:32:31 PM
Post by: SteveC on October 11, 2023, 11:32:57 PM
Post by: SteveC on October 18, 2023, 11:14:59 PM
Post by: David on October 19, 2023, 01:41:33 AM
Ironwood
That's some very nice DIW! :like:
Post by: David on October 19, 2023, 01:42:02 AM
Spalted Beech and Ebony
Sweet! :like:
Post by: David on October 19, 2023, 01:46:54 AM
Post by: SteveC on October 19, 2023, 04:44:51 AM
Post by: LoopCutter on October 19, 2023, 04:51:35 AM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on October 19, 2023, 05:40:43 AM
Post by: David on October 19, 2023, 05:46:16 PM
Brazilian Cherry
[ This attachment cannot be displayed inline in 'Print Page' view ]
:like:
Post by: Barry Rowland on October 25, 2023, 06:39:16 PM
Post by: SteveC on October 25, 2023, 08:27:34 PM
Post by: SteveC on October 25, 2023, 08:27:52 PM
Post by: David on October 25, 2023, 11:00:10 PM
Ebony
Nice pic of Charlie Lamb! B
Post by: David on October 25, 2023, 11:01:48 PM
Post by: SteveC on October 25, 2023, 11:31:44 PM
Post by: SteveC on November 01, 2023, 05:16:08 PM
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=560367;fs=425389)
Post by: Gareth on November 01, 2023, 07:01:12 PM
Post by: David on November 01, 2023, 11:28:57 PM
Post by: SteveC on November 08, 2023, 05:00:22 PM
Post by: SteveC on November 08, 2023, 05:00:50 PM
Walnut
Post by: SteveC on November 15, 2023, 09:00:25 PM
Post by: SteveC on November 15, 2023, 09:00:47 PM
Ebony and Cocobolo
Post by: David on November 15, 2023, 11:04:49 PM
Post by: SteveC on November 22, 2023, 05:12:14 PM
Post by: SteveC on November 22, 2023, 05:12:37 PM
Post by: David on November 23, 2023, 02:17:19 AM
Bloodwood and Spalted Beech8) :drool: :like:
Post by: David on November 23, 2023, 02:19:00 AM
Post by: Gareth on November 24, 2023, 02:42:44 AM
Bog Oak
That's a bit pretty! :drool: I hear good things about Michael May knives, what do you think?
Post by: SteveC on November 29, 2023, 11:15:01 PM
English Oak and Rosewood
Post by: SteveC on December 20, 2023, 08:36:25 PM
Post by: SteveC on December 20, 2023, 08:54:35 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on December 27, 2023, 05:12:54 PM
Post by: SteveC on December 27, 2023, 05:13:19 PM
Post by: LoopCutter on December 27, 2023, 11:03:05 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on December 28, 2023, 03:53:38 PM
Post by: LoopCutter on January 03, 2024, 08:20:10 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SteveC on January 03, 2024, 08:33:21 PM
Post by: SteveC on January 03, 2024, 08:33:44 PM
Post by: AzteCypher on January 03, 2024, 08:42:25 PM
Post by: SteveC on January 03, 2024, 09:19:34 PM
@SteveC - I gotta ask. What's the case with the scroll work? That looks pretty neat.
It's a Vesta or Match safe that belonged to my Grandpa.
Post by: AzteCypher on January 04, 2024, 01:30:48 AM
Post by: SteveC on January 10, 2024, 07:59:00 PM
Post by: SteveC on January 24, 2024, 05:49:57 PM
Post by: LoopCutter on January 24, 2024, 07:06:41 PM
Can not decide 😁
[ This attachment cannot be displayed inline in 'Print Page' view ]
Opinel’s, beech
Robeson - Shurwood
Buck - Cherry Stained Woodgrain
Post by: LoopCutter on January 24, 2024, 07:08:05 PM
Post by: Aloha on January 25, 2024, 02:56:09 AM
Post by: MadPlumbarian on January 25, 2024, 03:47:42 AM
JR
Post by: SteveC on January 25, 2024, 05:43:11 AM
Post by: SteveC on January 25, 2024, 05:43:43 AM
@Steve - lovely grain on your Rosewood Lamb👍🌹
Thanks buddy and nice Opies ! :tu:
Post by: David on February 07, 2024, 07:48:44 PM
Post by: Gareth on February 07, 2024, 08:56:13 PM
Post by: AzteCypher on February 07, 2024, 11:46:22 PM
(https://i.imgur.com/S8xpor1.jpg)
Post by: SteveC on February 08, 2024, 11:21:21 PM
Post by: Heywood Floyd on February 11, 2024, 09:49:14 AM
I started with a Brisa Kephart Kit
(https://i.imgur.com/hCsmdEK.jpg)
(https://i.imgur.com/8GCaY7r.jpg)
then a few steps to
(https://i.imgur.com/Z0GZxQf.jpg)
then
(https://i.imgur.com/BdsZ5xH.jpg)
and ended up with this
(https://i.imgur.com/7TxZgEE.jpg)
Post by: HarleyXJGuy on February 11, 2024, 04:53:33 PM
Fun project too.
Post by: Heywood Floyd on February 11, 2024, 05:15:28 PM
That’s a beauty Heywood.Thanks Harley.
Fun project too.
Horace Kephart knew about real use knives. My version is a broadly capable blade.
It actually performs better than expected which is always nice.
Overall cost was about a hundred US buck$
Post by: LoopCutter on February 11, 2024, 10:30:09 PM
That’s a beauty Heywood.
Fun project too.
:woohoo: :cheers:
Post by: HarleyXJGuy on February 12, 2024, 12:24:44 AM
:woohoo: :cheers:
Hey Buddy how you been?
Post by: LoopCutter on February 12, 2024, 01:53:23 AM
Hey Buddy how you been?
I have been doing good, last test came back clear in January.
But, 🥹. Had been concerned for you and your ladies. You’ve been. MISSED!
Also, lost touch with FarmerX so awl East MI dropped from site.
Post by: HarleyXJGuy on February 12, 2024, 02:27:44 PM
I have been doing good, last test came back clear in January.
But, 🥹. Had been concerned for you and your ladies. You’ve been. MISSED!
Also, lost touch with FarmerX so awl East MI dropped from site.
Thought we fell into Lake Saint Clair?
Wife is doing much better and our health insurance seems to be taking care of us for the most part.
Glad to see MTO off topic is still a thing.
Post by: LoopCutter on February 12, 2024, 04:03:42 PM
👍
👍
Post by: Gareth on February 12, 2024, 10:59:51 PM
It ain't Wednesday so please excuse …
I started with a Brisa Kephart Kit
(https://i.imgur.com/hCsmdEK.jpg)
(https://i.imgur.com/8GCaY7r.jpg)
then a few steps to
(https://i.imgur.com/Z0GZxQf.jpg)
then
(https://i.imgur.com/BdsZ5xH.jpg)
and ended up with this
(https://i.imgur.com/7TxZgEE.jpg)
That looks awesome. :tu:
Post by: SteveC on February 14, 2024, 06:12:57 PM
Post by: AzteCypher on February 14, 2024, 07:45:35 PM
Post by: SteveC on February 21, 2024, 06:25:31 PM
Post by: LoopCutter on February 21, 2024, 08:03:18 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Currently in my display case…. Surrounded by an assortment of CASE models. ☺️
Post by: LoopCutter on February 28, 2024, 10:28:20 PM
:woohoo:
My Opinel No8 Garden knife and neck sheath is being prepped for the Opinel Challenge March 1.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Great time to show of some luvly Wood handles every day of March and also add your favorite picture weekly to this thread.
https://forum.multitool.org/index.php/topic,90877.210.html
Post by: SteveC on February 28, 2024, 11:15:29 PM
Ebony and Cocobolo
Post by: Heywood Floyd on February 29, 2024, 08:36:53 AM
Post by: SteveC on February 29, 2024, 02:03:06 PM
(https://i.imgur.com/A5nYLw2.jpg)Re-handled ElCheapo™ plastic handled IKEA paring knife. Works a treat.
Very cool !
Post by: Heywood Floyd on February 29, 2024, 02:50:41 PM
Very cool !Thanks Steve.
(any excuse to post a pic)
(https://i.imgur.com/oLvRLK2.jpg)
Post by: LoopCutter on February 29, 2024, 04:28:05 PM
Next time, post more than one photo so we get the full effect😎
Post by: AzteCypher on February 29, 2024, 04:50:49 PM
Post by: Aloha on March 02, 2024, 08:52:00 PM
Post by: Heywood Floyd on March 02, 2024, 09:09:45 PM
That Ikea knife looks nice.Thanks Aloha.
The original set of knives from Ikea are worth literally a couple of dollars. The cylindrical handles make them very difficult if not impossible to use and this is what prompted the re-handling, The two pack set including the paring knife …
(https://i.ebayimg.com/images/g/MLUAAOSw01Vhj~k5/s-l1200.webp)
The paring knife's detailed spec …
(https://assets-global.website-files.com/5b44edefca321a1e2d0c2aa6/61ca3c081a636841458e961b_Dimensions-Objects-Kitchen-Knives-IKEA-Fordubbla-Paring-Knife-Dimensions.svg)
(https://i.imgur.com/Wd1p1wG.jpg)
IKEA - FÖRDUBBLA - Smallest of the pair, paring knife, worth 3/5ths of 5/8ths of F/all
https://www.ikea.com/us/en/p/foerdubbla-2-piece-knife-set-gray-00436790/
Fitted with a Japanese wooden honki handle via JB Weld and Cu pin.
Post by: SteveC on March 06, 2024, 05:09:06 PM
(https://i.postimg.cc/cHD4hZJG/20240306-092739.jpg)
Post by: chip on March 06, 2024, 09:27:44 PM
Fällkniven u1
Post by: Gareth on March 07, 2024, 01:14:30 PM
The only wood handled folder I own.
Fällkniven u1
It's a good one though!!
Post by: Gareth on March 07, 2024, 01:15:15 PM
Post by: chip on March 07, 2024, 01:47:41 PM
It's a good one though!!
Functionally it is a fantastic knife, that is why I keep returning to it.
But I doesn’t particularly do anything for me aesthetically, the reason why I keep having temporary flirtations with other knives. I really want to settle down with something prettier.
But it never works out and I always go back to this as apart from its looks it’s an exceptional knife.
Post by: SteveC on March 13, 2024, 05:02:50 PM
Post by: chip on March 27, 2024, 12:13:20 PM
Post by: SteveC on March 27, 2024, 12:36:31 PM
Post by: chip on March 27, 2024, 12:50:28 PM
Nice one Chip ! :like:Thank you, I think the barlow is my favourite knife pattern and Böker appear to make them so well. :tu:
Post by: SteveC on March 27, 2024, 04:56:46 PM
Post by: SteveC on April 03, 2024, 05:58:01 PM
Post by: David on April 10, 2024, 07:57:23 PM
Post by: SteveC on April 10, 2024, 09:13:05 PM
Post by: SteveC on April 10, 2024, 09:13:27 PM
Post by: LoopCutter on April 10, 2024, 11:10:17 PM
WHW
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Adam5 on April 10, 2024, 11:46:09 PM
Nice trio for WW ! :like: :tu:
:iagree: :like:
Post by: Adam5 on April 10, 2024, 11:46:53 PM
Spalted Beech and Ebony
I should have looked here first :D
:like:
Post by: Adam5 on April 10, 2024, 11:49:05 PM
A 501, opening envelopes for bill payday.
WHW
[ This attachment cannot be displayed inline in 'Print Page' view ]
That rosewood handle looks nice :like:
Post by: Adam5 on April 10, 2024, 11:49:50 PM
(https://i.imgur.com/uphnmlm.jpeg)