Multitool.org Forum

Tool Talk => Leatherman Tools => Topic started by: Kampfer on November 04, 2014, 05:30:43 PM

Title: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 04, 2014, 05:30:43 PM
(http://forum.multitool.org/index.php?action=dlattach;topic=49951.0;attach=133247;image)
Should you dare to enter, you agree to spend the entire December of 2014 equipping with a stylish Skeletool* as your SOLE Multi-Tool / Knife and nothing more.
So put away your SAK, folder and keychain tools, etc for hibernation.

* Any one MT from the Skeletool family would be accepted, that include : MUT, Skeletool, Freestyle, Style CS/PS & Style.
You should not switch tool between above selection during the challenge, so choose wisely before the challenge began.

A) You can bring as many exchangeable bits as you like / need.
B) Hacked Skeletool are welcome to enter.
Here is an excellent write up on Skeletool Faimly (http://forum.multitool.org/index.php/topic,52199.0.html) by Chako.

To be eligible for the giveaway (relying on the honor system):

1) This challenge runs from December 1st through December 31st. You must participate all 31 days.

2) You must have posts count of 31 or more by December 31st, 2014.

3) Reply to this thread with a photo of your Skeletool you will be participating the challenge with, you are encouraged to express (praise or criticize) your experience with the Skeletool during the challenge.

4) If you need a dedicated tool for a task, please do so. No one is asking you to cut down a tree or trim your finger nails with a Skeletool…  Please use common sense. If you gave up and going back to a bigger multi-tool, shout out, no one will laugh at you.

5) Obey your local laws, regulations and work place, school polices, etc.

6) Be safe and be prepared.

Should you survive and completed the challenge, you get a shot at winning the new in box Super Tool 300 + Micra combo pack.
One of the admins will draw a winner on January 1st, 2015.
(http://forum.multitool.org/index.php?action=dlattach;topic=49951.0;attach=133249;image)
Title: Re: Official 31-Day SKELETOOL Challenge!
Post by: Kampfer on November 04, 2014, 05:32:01 PM
01-Kampfer, Skeletool X
Title: Re: Official 31-Day SKELETOOL Challenge!
Post by: ducttapetech on November 04, 2014, 05:32:55 PM
Hmmmmm......might have to give this one a try.
Title: Re: Official 31-Day SKELETOOL Challenge!
Post by: pfrsantos on November 04, 2014, 05:50:45 PM
Closest thing I have is a Style PS... Don't really need a Skeletool. I'll sit this one out and laugh at the stressed out encourage the contestants.

 :D :D :D :D :tu: :tu: :cheers:
Title: Re: Official 31-Day SKELETOOL Challenge!
Post by: powernoodle on November 04, 2014, 05:52:20 PM
Anything worth doing is worthy overdoing.  I'm in - at least until I drop out.

01-Kampfer, Skeletool X
02-Powernoodle, Skeletool
Title: Re: Official 31-Day SKELETOOL Challenge!
Post by: AimlessWanderer on November 04, 2014, 05:56:49 PM
Very generous giveaway mate :hatsoff:

Good luck to all who enter  :salute:
Title: Re: Official 31-Day SKELETOOL Challenge!
Post by: captain spaulding on November 04, 2014, 06:01:27 PM
I would enter this, but traded off my Skeletools a while back. Should be a interesting thread though. Sweet idea Kampfer.  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Cupboard on November 04, 2014, 06:16:33 PM
Great idea and thanks for doing the GAW  :tu:

unfortunately, much as I love the Skeletool I can't manage with it on a day to day basis at work and I can't really carry it off work either   :(
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Corwyn on November 04, 2014, 06:19:57 PM
I edc a SkeleTool anyway, but paired with a proper sak with scrissors, and nailfile and toothpick...
I don't like either the ST or the Micra enough to be worth the aggravation, but thanks for the opportunity and best of luck, guys...
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on November 04, 2014, 06:21:00 PM
I'm definitely in! my Skeletool CX was my primary EDC for 3-4 years before I got into modding. :D here's a pic of my trusty CX after it saved my bacon one day (http://forum.multitool.org/index.php/topic,46534.0.html) while riding my bike to work.

(https://farm3.staticflickr.com/2836/9443471461_622cceeabe_h.jpg)

very generous of you, Kampfer... thanks for the chance! :cheers:

01-Kampfer, Skeletool X
02-Powernoodle, Skeletool
03-Breezy12, Skeletool CX
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on November 04, 2014, 06:22:01 PM
Generous giveaway Kampfer, but I'll be sitting this one out as I explained in your other thread.  I just wanted to be in here to read how it goes for everyone participating :tu: 
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 04, 2014, 06:22:23 PM
I edc a SkeleTool anyway, but paired with a proper sak with scrissors, and nailfile and toothpick...
I don't like either the ST or the Micra enough to be worth the aggravation, but thanks for the opportunity and best of luck, guys...
I understand, I too normally team up with a hacked Micra to makeup for what Skeletool doesn't have.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: gustophersmob on November 04, 2014, 06:42:00 PM
Nice challenge, and nice giveaway  :cheers:

Hmm...I don't have a skeletool, so I wonder if I can justify buying one for this  :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 04, 2014, 08:22:41 PM
Need some enabling?  >:D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 04, 2014, 08:24:04 PM
I was all like "I don't know if I want to buy a Skeletool for the challenge" in Kampfers do you want a challenge thread.

Really though who am I kidding. I am SO in.  :tu:

One caveat though. If the slow mail system here does not deliver my Skelly in time can I go with no tool till it shows and still be in? That really hurt my heart to type by the way.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 04, 2014, 08:31:46 PM
 :tu:
That is the MT.o way.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 04, 2014, 08:35:16 PM
So is that yay or nay on if I am good in case my Skelly shows up a few days late?

Oh and regular old Skeletool will be what I bring to the party.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 04, 2014, 08:39:51 PM
So is that yay or nay on if I am good in case my Skelly shows up a few days late?

Oh and regular old Skeletool will be what I bring to the party.
Yay! :tu: welcome to the party.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 04, 2014, 08:44:00 PM
Nice!

Will have to wait until the PX opens tomorrow to order it.

Stupid bank decided that since I was buying stuff from Afghanistan my debt card must have been hacked. Which is kinda stupid since it is a bank that serves the armed forces almost exclusively.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 04, 2014, 08:48:51 PM
No Skeletool or MUT here so I won't be taking part.

Given that December is wood and hay month I would only want to do the challenge with the MUT.

Hats off to Kampfer though for a great idea and prize.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 04, 2014, 08:54:23 PM
No Skeletool or MUT here so I won't be taking part.

Given that December is wood and hay month I would only want to do the challenge with the MUT.

Hats off to Kampfer though for a great idea and prize.

Wood and hay month?  :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 04, 2014, 09:02:55 PM
No Skeletool or MUT here so I won't be taking part.

Given that December is wood and hay month I would only want to do the challenge with the MUT.

Hats off to Kampfer though for a great idea and prize.

Wood and hay month?  :think:

Yeah, time to prep firewood for heating and hay for the horses.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: GPS12 on November 04, 2014, 09:16:12 PM
Kampfer... thanks for the chance and the Giveaway is very generous:tu:
I`ve ordered a Skeletool CX yesterday morning because of this Thread: http://forum.multitool.org/index.php/topic,53792.0.html :D

Normaly I EDC a Surge daily but I think this Challenge is a change to see if the Skeletool is tough enough for my job :)

So, if I can join I would be happy :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 04, 2014, 10:42:35 PM
So far we have:
01-Kampfer, Skeletool X
02-Powernoodle, Skeletool
03-Breezy12, Skeletool CX
04-HarleyXJGuy, Skeletool
05-GPS12, SKeletool CX

I have reserved the right to sweeten the deal a bit if we have more challengers.
For every 20 challengers enter, I will throw in another combo pack as prize.
That mean each of you will at least 5% chance to win.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: microbe on November 04, 2014, 11:05:04 PM
I have a Skeletool and used it for months as my only knife/tool, but it has been delegated to light carry only these days. I like to switch between knives/tools to much to enter any monthly challenge - probably exactly why it is called a challenge.  :facepalm:
To all entrants: enjoy it!
(and be careful for the Skeletool pinch - don't say I did not warn you) :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: BIG-TARGET on November 04, 2014, 11:22:44 PM
Didn't I win this by default a number of years ago?  And still have the record today? :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: derekmac on November 04, 2014, 11:25:16 PM
I won't enter right now, as I need to think about this.  :think:  If I do though, it'll be with my MUT.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: jerseydevil on November 04, 2014, 11:36:19 PM
The Skeletool and I certainly didn't get along.  I traded it within two weeks.  :(
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 04, 2014, 11:46:32 PM
The Skeletool and I certainly didn't get along.  I traded it within two weeks.  :(
Just like me and Gerbers.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on November 04, 2014, 11:50:51 PM
The Skeletool and I certainly didn't get along.  I traded it within two weeks.  :(
Just like me and Gerbers.
Did you keep the MP1, or did that one go too?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kirk13 on November 04, 2014, 11:52:43 PM
Kampfer,that's an interesting challenge,and a very generous giveaway attached!

I'm out though. The only family member I have us the Style PS,but there's just no way I can get through December in a toy shop with only a PS.

I did have a Skeli,but I wouldn't dare carry one in the height of Londons stabbing season!

Good luck to all the nutters entering :tu:

Ps
Just remembered I've got the Freestyle too. It's still a no!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: PTRSAK on November 04, 2014, 11:53:14 PM
I have used my Skele as my WDC (work day carry) for the last 10 months or so. It is fine for the job, but I mainly use it for the blade as it is "paired" with a Classic SD and full toolbox of "real" tools. To be honest it could be replaced with a OHO folder but I feel the LM will be less WMD looking than some tacticool folder if I have to explain it to Mr Plod.  :police:
Out of work hours I'm sure I would miss scissors, nail file and a driver I could pry with too much.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: powernoodle on November 05, 2014, 12:14:36 AM
To get warmed up for this one, I've been pocket carrying a Skeletool today.  Not clipped, but down in the pocket.  Its doable, especially when I ditch my regular folder.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pingu on November 05, 2014, 10:00:11 AM
I switched off when it was going to be Skeletool.  Don't have one, locking blade and all that.  Then Style PS was OK, which I do have, except its hacked.  Hacked Skeltool is mentioned but not hacked PS  :pok:.  Problem is the hack is Dime blade in place of nail file.  Recently my Evo 18 re-profiled nail file has been a well used tool.

No way will the Style PS manage my Festive Season so I'll give this a miss.  However thanks for the heads-up on Supertool 300 combo pack.   Did I say Festive Season... :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 05, 2014, 12:49:58 PM
Leatherman Skeletool 830846 ordered!

Now we wait.   :mail:

This will be me and the lady from our personnel section who does mail if it don't get here in time.   :twak:

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 05, 2014, 05:25:00 PM
To get warmed up for this one, I've been pocket carrying a Skeletool today.  Not clipped, but down in the pocket.  Its doable, especially when I ditch my regular folder.
:tu:
Leatherman Skeletool 830846 ordered!

:tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pfrsantos on November 05, 2014, 05:29:31 PM
Leatherman Skeletool 830846 ordered!

Now we wait.   :mail:

This will be me and the lady from our personnel section who does mail if it don't get here in time.
   :twak:

You're gonna let a girl beat you?...
 :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 05, 2014, 05:38:36 PM
Leatherman Skeletool 830846 ordered!

Now we wait.   :mail:

This will be me and the lady from our personnel section who does mail if it don't get here in time.
   :twak:

You're gonna let a girl beat you?...
 :facepalm:

Don't judge me.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pfrsantos on November 05, 2014, 05:40:53 PM
Leatherman Skeletool 830846 ordered!

Now we wait.   :mail:

This will be me and the lady from our personnel section who does mail if it don't get here in time.
   :twak:

You're gonna let a girl beat you?...
 :facepalm:

Don't judge me.

I don't judge, I envy...

 :D :D :D :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 05, 2014, 06:49:59 PM
Great challenge Kampfer :salute:

I dont have a Skeletool or a Skeletool related tool, so I will sit this one out.
Ill be watching though :popcorn:


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 05, 2014, 06:53:49 PM
Great challenge Kampfer :salute:

I dont have a Skeletool or a Skeletool related tool, so I will sit this one out.
Ill be watching though :popcorn:


Sent from a device made from star dust using tapatalk

Whats $40 when you think about all the fun you could have all month wishing for more tool or a nice knife/keychain tool.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on November 05, 2014, 07:20:09 PM
To get warmed up for this one, I've been pocket carrying a Skeletool today.  Not clipped, but down in the pocket.  Its doable, especially when I ditch my regular folder.
:tu:

I can't decide if I should warm up for this challenge by starting to EDC my Skeletool again, or if I should get as much quality time with my modded tools as I can before I ditch them for a month... :ahhh
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 05, 2014, 08:30:26 PM
To get warmed up for this one, I've been pocket carrying a Skeletool today.  Not clipped, but down in the pocket.  Its doable, especially when I ditch my regular folder.
:tu:

I can't decide if I should warm up for this challenge by starting to EDC my Skeletool again, or if I should get as much quality time with my modded tools as I can before I ditch them for a month... :ahhh

Oh no. It is my opinon that pre gaming something like this is a bad idea. Use this time to get your fill of changing your tool say 4 or 5 times a day.

Pretty sure the need for more tool won't be the worst part but being stuck with one tool for the whole month.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on November 05, 2014, 08:33:35 PM
I'm in

So far we have:
01-Kampfer, Skeletool X
02-Powernoodle, Skeletool
03-Breezy12, Skeletool CX
04-HarleyXJGuy, Skeletool
05-GPS12, SKeletool CX
06- Colt 1911, skeletool

(http://tapatalk.imageshack.com/v2/14/11/05/2f555433e22b05d377579cc026e1cb92.jpg)

Thanks for the challenge & GAW !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 05, 2014, 08:43:40 PM
Skelly related question that I thought could go here.

Does it come with the pocket clip or is that always something you have to purchase seperately?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on November 05, 2014, 08:48:37 PM
Skelly related question that I thought could go here.

Does it come with the pocket clip or is that always something you have to purchase seperately?

the pocket clip comes standard on all Skeletool models, but it's easily removable if you prefer to go clipless. :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 05, 2014, 08:53:21 PM

Great challenge Kampfer :salute:

I dont have a Skeletool or a Skeletool related tool, so I will sit this one out.
Ill be watching though :popcorn:


Sent from a device made from star dust using tapatalk

Whats $40 when you think about all the fun you could have all month wishing for more tool or a nice knife/keychain tool.

Cant get a Skele for $40 over here. And I would have to get the CX version that is even more expencive, as I dont like CE blades.  I dont think I would miss many tools though, as I usually EDC a Wenger SI combined with a Vic Manager and a folder. The only tool I would probably miss is the scissors on the manager.  :)


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 05, 2014, 09:14:31 PM

Great challenge Kampfer :salute:

I dont have a Skeletool or a Skeletool related tool, so I will sit this one out.
Ill be watching though :popcorn:


Sent from a device made from star dust using tapatalk

Whats $40 when you think about all the fun you could have all month wishing for more tool or a nice knife/keychain tool.

Cant get a Skele for $40 over here. And I would have to get the CX version that is even more expencive, as I dont like CE blades.  I dont think I would miss many tools though, as I usually EDC a Wenger SI combined with a Vic Manager and a folder. The only tool I would probably miss is the scissors on the manager.  :)


I thought the CX had the PE and the regular Skelly had the CE blade? Not a fan of CE blades so this challenge should beinteresting in that regard.



the pocket clip comes standard on all Skeletool models, but it's easily removable if you prefer to go clipless. :tu:

Yeah I am thinking that I will go with the Skelly in the pocket rather then mess with the whole belt pouch situation. It only weighs 5oz which is about an oz more then my Millie which is no issue to carry everyday.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 05, 2014, 09:55:47 PM
Hacked Skeltool is mentioned but not hacked PS  :pok:. 
Skeletool* = Any tool from the Skeletool family.
I like to see someone so hardocre enter the challenge with a Style.

Skeletool is a knife, with pliers and driver as bonus, pocket clip carry is the way to go.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Freaver on November 05, 2014, 10:47:00 PM
Ohh... If only I had a skeletool.  :-\

Having this challenge in December is perfect for me, due to the fact that I'm gonna open a helluvalot of boxes and cutting packing strips; something simple, that still has the pliers and bit driver would pretty much cover all my needs. That is, if I either had it or could afford it right now.

Guess I'll just have to settle with looking at you lot instead. And drooling over your tools...  :drool:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Lichtbote on November 05, 2014, 11:04:59 PM
Whats $40 when you think about all the fun you could have all month wishing for more tool or a nice knife/keychain tool.

Cant get a Skele for $40 over here.

Same her in Germany. Usually 65€ for the SS and 80€ for the CX can be called a good deal, prices are often above that. Thats around 82$ for the SS and 100$ for the CX. Plus shipping.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 05, 2014, 11:31:02 PM
But the price didn't stop you guys getting other Leatherman tools, because ... ?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Lichtbote on November 05, 2014, 11:38:59 PM
No other choice - you pay, or you have no MT.

Surge - 115 to 150€
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 05, 2014, 11:47:50 PM
In the future if you need help getting MT directly from USA, let us know.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Lichtbote on November 05, 2014, 11:52:57 PM
  :salute: :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 06, 2014, 12:03:11 AM
I'm in

So far we have:
01-Kampfer, Skeletool X
02-Powernoodle, Skeletool
03-Breezy12, Skeletool CX
04-HarleyXJGuy, Skeletool
05-GPS12, SKeletool CX
06- Colt 1911, skeletool

(http://tapatalk.imageshack.com/v2/14/11/05/2f555433e22b05d377579cc026e1cb92.jpg)

Thanks for the challenge & GAW !


Sak's  rule !
Good deal Colt!!! I hope to be in this too. Gotta see how much I left after bills. Might have to trade of a old Huntsman.....hmmmmm
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 06, 2014, 12:35:27 AM

Guess I'll just have to settle with looking at you lot instead. And drooling over your tools...  :drool:

Umm.....akward.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: BIG-TARGET on November 06, 2014, 12:37:35 AM
This will be tough for me since I have a a regular Skeletool along with the CX/SX, and both Freestyles :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 06, 2014, 12:51:58 AM
Good deal Colt!!! I hope to be in this too. Gotta see how much I left after bills. Might have to trade of a old Huntsman.....hmmmmm

Come on Nate you know you want to.

 :assimilate:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 06, 2014, 01:32:47 AM
Good deal Colt!!! I hope to be in this too. Gotta see how much I left after bills. Might have to trade of a old Huntsman.....hmmmmm

Come on Nate you know you want to.

 :assimilate:
Oh I want too.........
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on November 06, 2014, 03:30:41 AM

I'm in

So far we have:
01-Kampfer, Skeletool X
02-Powernoodle, Skeletool
03-Breezy12, Skeletool CX
04-HarleyXJGuy, Skeletool
05-GPS12, SKeletool CX
06- Colt 1911, skeletool

(http://tapatalk.imageshack.com/v2/14/11/05/2f555433e22b05d377579cc026e1cb92.jpg)

Thanks for the challenge & GAW !


Sak's  rule !
Good deal Colt!!! I hope to be in this too. Gotta see how much I left after bills. Might have to trade of a old Huntsman.....hmmmmm

Sweet ! Hope you snag one, I'll keep an eye out for a deal.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on November 06, 2014, 04:01:37 AM
Alright, I've gone back and forth about this.  The idea of locking everything up for ANOTHER month isn't settling well, but I think by December I should be able to give it a shot.  I'm in with my plain edge Skele.

01 - Kampfer, Skeletool X
02 - powernoodle, Skeletool
03 - Breezy12, Skeletool CX
04 - HarleyXJGuy, Skeletool
05 - GPS12, Skeletool CX
06 - colt 1911, Skeletool
07 - eddie1115, Skeletool

(http://tapatalk.imageshack.com/v2/14/11/05/20861f07b9d7b341db76c2b0821bad77.jpg)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on November 06, 2014, 06:07:28 AM
G'Day,

This will be an interesting challenge. I'm in with a MUT. I have been looking for an excuse to carry it exclusively, and test the leather sheaths I made. It will certainly be a change from the Original Wave I usually carry.

01 - Kampfer, Skeletool X
02 - powernoodle, Skeletool
03 - Breezy12, Skeletool CX
04 - HarleyXJGuy, Skeletool
05 - GPS12, Skeletool CX
06 - colt 1911, Skeletool
07 - eddie1115, Skeletool
08 - pietervn, BO MUT

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Freaver on November 06, 2014, 08:26:39 AM

Guess I'll just have to settle with looking at you lot instead. And drooling over your tools...  :drool:

Umm.....akward.
Not that tool! :twak:

xD
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 06, 2014, 09:08:37 AM
 :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 06, 2014, 09:23:09 AM

Guess I'll just have to settle with looking at you lot instead. And drooling over your tools...  :drool:

Umm.....akward.
Not that tool! :twak:

xD

Hey its cool I know that I am a handsome man. Really just something us beautiful people have to deal with.

Nothing to be ashamed of.

 :pok: :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: powernoodle on November 06, 2014, 01:18:57 PM
Can't do it, guys.  My 1-day test run was a bust.  I'm out.  (http://smileyicons.net/s/691.gif)

01 - Kampfer, Skeletool X
02 - Breezy12, Skeletool CX
03 - HarleyXJGuy, Skeletool
04 - GPS12, Skeletool CX
05 - colt 1911, Skeletool
06 - eddie1115, Skeletool
07 - pietervn, BO MUT
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on November 06, 2014, 01:24:13 PM
Can't do it, guys.  My 1-day test run was a bust.  I'm out.  (http://smileyicons.net/s/691.gif)

01 - Kampfer, Skeletool X
02 - Breezy12, Skeletool CX
03 - HarleyXJGuy, Skeletool
04 - GPS12, Skeletool CX
05 - colt 1911, Skeletool
06 - eddie1115, Skeletool
07 - pietervn, BO MUT

That surprised me, Noodle. Your carry tends to be quite minimalistic anyway. Was it just the lack of scissors or something else?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 06, 2014, 02:00:27 PM

I'm in

So far we have:
01-Kampfer, Skeletool X
02-Powernoodle, Skeletool
03-Breezy12, Skeletool CX
04-HarleyXJGuy, Skeletool
05-GPS12, SKeletool CX
06- Colt 1911, skeletool

(http://tapatalk.imageshack.com/v2/14/11/05/2f555433e22b05d377579cc026e1cb92.jpg)

Thanks for the challenge & GAW !


Sak's  rule !
Good deal Colt!!! I hope to be in this too. Gotta see how much I left after bills. Might have to trade of a old Huntsman.....hmmmmm

Sweet ! Hope you snag one, I'll keep an eye out for a deal.


Sak's  rule !
Thanks! Im eyeballing the Cx. Found a couple for 58 shipped. Not sure if that is a good price or not. Never really looked around for one before.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 06, 2014, 03:30:18 PM

I'm in

So far we have:
01-Kampfer, Skeletool X
02-Powernoodle, Skeletool
03-Breezy12, Skeletool CX
04-HarleyXJGuy, Skeletool
05-GPS12, SKeletool CX
06- Colt 1911, skeletool

(http://tapatalk.imageshack.com/v2/14/11/05/2f555433e22b05d377579cc026e1cb92.jpg)

Thanks for the challenge & GAW !


Sak's  rule !
Good deal Colt!!! I hope to be in this too. Gotta see how much I left after bills. Might have to trade of a old Huntsman.....hmmmmm

Sweet ! Hope you snag one, I'll keep an eye out for a deal.


Sak's  rule !
Thanks! Im eyeballing the Cx. Found a couple for 58 shipped. Not sure if that is a good price or not. Never really looked around for one before.

It is only $18 more then I paid for my regular Skelly shipped from Amazon. Can't be that bad a deal.

Been doing some thinking about this whole Skeletool combo edge blade situation and came to the conclusion I should give CE a chance. Part of the 31 day Skelly challenge sort of. Plus I looked on TTC and they did not have any PE 154 blades for sale. Thought for sure they would from all the Ninja Damascus tools they make.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: powernoodle on November 06, 2014, 03:49:02 PM
That surprised me, Noodle. Your carry tends to be quite minimalistic anyway. Was it just the lack of scissors or something else?

Its not impossible that I will jump back in.  I think I would still like to try. But you are right that I am into maximizing the utility to size/weight ratio of my toys.  And for me, the Skeletool is not optimal in this regard.  The S2 weighs less and has more tools, for example, and so I get a grumpy face when I look at the Skeletool.

Its really hard for me not to have a SAK in my pocket, and I'm still rebounding from the last minimalist challenge too.  So that's part of it.  And, I want to increase the odds that one of you guys will win it, because if I get back in, I'm definitely winning it.  :)

I love the idea of the challenge, though, and may get back in before Dec 1 if I can muster the stamina.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Lichtbote on November 06, 2014, 04:00:42 PM
Been doing some thinking about this whole Skeletool combo edge blade situation and came to the conclusion I should give CE a chance.

Good idea.  :tu:

I somehow like partial serrated blades.

While i enjoy a plain edge for easy and precise cuttings, i prefer serrated blades for the more heavy cutting "at real work", where each plain edge would go blunt soon. That´s one reason i love and edc my Surge (and why i´m upgrading my OHT blades), it has good sized blades of each kind.

But when i´m stuck with only one blade .... then partial serrated, please.
At least if the blade is not to small, the size of the Skeletools blade is where the fun starts.  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 06, 2014, 04:11:27 PM

While i enjoy a plain edge for easy and precise cuttings, i prefer serrated blades for the more heavy cutting "at real work", where each plain edge would go blunt soon.

Agree about SE blades holding there sharpness a bit longer with the softer steel you often see on Multi Tool blades. That is part of the reason I love my super steel Spyderco knives. 

Something in S90V, 110V or CTS-204P will hold its edge for a very long time. Like I just sharpen them after a month or so just cause, not because of a major loss in sharpness.

Part of the reason I can not wait to toss a S30V blade on my Wave.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Lichtbote on November 06, 2014, 04:24:52 PM
The steel doesn´t matter that much, they all get blunt at those kind of work.  ;)

Cutting ropes, pallet straps, heavy rubber or PU hoses (esspecially when cutting the ends to install new brass fittings the blade often get contact to the brass), .... all much better done with a serrated blade.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on November 06, 2014, 08:57:32 PM


I'm in

So far we have:
01-Kampfer, Skeletool X
02-Powernoodle, Skeletool
03-Breezy12, Skeletool CX
04-HarleyXJGuy, Skeletool
05-GPS12, SKeletool CX
06- Colt 1911, skeletool

(http://tapatalk.imageshack.com/v2/14/11/05/2f555433e22b05d377579cc026e1cb92.jpg)

Thanks for the challenge & GAW !


Sak's  rule !
Good deal Colt!!! I hope to be in this too. Gotta see how much I left after bills. Might have to trade of a old Huntsman.....hmmmmm

Sweet ! Hope you snag one, I'll keep an eye out for a deal.


Sak's  rule !
Thanks! Im eyeballing the Cx. Found a couple for 58 shipped. Not sure if that is a good price or not. Never really looked around for one before.

http://pages.ebay.com/link/?nav=item.view&alt=web&id=161474848506


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 07, 2014, 01:48:49 AM
Thanks for the link.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: captain spaulding on November 07, 2014, 01:52:40 AM
Thanks for the link.

The Skeletool in the link is represented as the CX, but is a standard Skeletool.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on November 07, 2014, 04:01:34 AM

Thanks for the link.

The Skeletool in the link is represented as the CX, but is a standard Skeletool.

Good catch, I missed it !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: bmot on November 07, 2014, 11:02:15 AM
I'd love to play, but I don't think my skeletool would be very accepted at my internship place, where I will spend most of my time, so I'll pass.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: babola on November 08, 2014, 05:21:54 AM
Sorry, another one with an excuse why not to join this challenge...December is my busiest month and I will hardly have any time to even think about MTs let alone wear them and record stuff along the way.

But in an off chance I do, it will be my trusty modded Black Ninja MUT.

Photo in Joel's style...
(https://farm8.staticflickr.com/7579/15117090113_bda58de366_o_d.jpg)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 10, 2014, 01:36:39 PM
Babola it looks like you black modded you fingers not the MUT.  :rofl:

So I tried a little SKTC pregaming today by leaving my Spydercos in the room and just rocking the Wave. Well as far as needing tools it was a bust since it was inventory computers day. I been thinking this challenge will be hard for two reasons.

One. I got a lot of neat stuff coming that will get here right about December. Boo! New toys and I can not even play with em. (Evowood 18, OC Pioneer, Swisschamp and a Spyderco Para 2 Sprint)

Two. Just gotten so use to having a knife clipped to my front pocket all the time. Can not imagine how many times I will reach for it.

Three. Yeah so what I can't count. Will kind be lame not being able to switch it up everyday or so.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 10, 2014, 06:15:21 PM
It is not a challenge if it is easy. :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 10, 2014, 06:28:13 PM
It is not a challenge if it is easy. :D

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/jd___that__s_what_she_said_by_leeroysmx357-d4ct9db.jpg~original)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: BIG-TARGET on November 10, 2014, 07:55:34 PM
It is not a challenge if it is easy. :D

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/jd___that__s_what_she_said_by_leeroysmx357-d4ct9db.jpg~original)
If wining were easy.  Everyone would own a Skeletool :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: geekdadrepair on November 11, 2014, 12:42:37 AM
I'm in with my SkeleVerde

Sent from my Nexus 7 using Tapatalk

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 11, 2014, 12:45:37 AM
I'm in with my SkeleVerde

Sent from my Nexus 7 using Tapatalk

In with your what?  :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: jerseydevil on November 11, 2014, 12:49:55 AM
I'm in with my SkeleVerde

Sent from my Nexus 7 using Tapatalk

In with your what?  :think:

You sure you want to know?  Colored Leathermen (Leathermans?  :think: ) might open up a whole new universe of addiction for you......  >:D

http://forum.multitool.org/index.php/topic,53718.0.html
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on November 11, 2014, 01:03:36 AM
I'm in. It will be tough. But I'm in.


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 11, 2014, 01:06:21 AM
01 - Kampfer, Skeletool X
02 - Breezy12, Skeletool CX
03 - HarleyXJGuy, Skeletool
04 - GPS12, Skeletool CX
05 - colt 1911, Skeletool
06 - eddie1115, Skeletool
07 - pietervn, BO MUT
08 - geekdadrepair, SkeleVerde
09 - AdmSlc, Skeletool
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 11, 2014, 01:10:24 AM
Babola it looks like you black modded you fingers not the MUT.  :rofl:

So I tried a little SKTC pregaming today by leaving my Spydercos in the room and just rocking the Wave. Well as far as needing tools it was a bust since it was inventory computers day. I been thinking this challenge will be hard for two reasons.

One. I got a lot of neat stuff coming that will get here right about December. Boo! New toys and I can not even play with em. (Evowood 18, OC Pioneer, Swisschamp and a Spyderco Para 2 Sprint)

Two. Just gotten so use to having a knife clipped to my front pocket all the time. Can not imagine how many times I will reach for it.

Three. Yeah so what I can't count. Will kind be lame not being able to switch it up everyday or so.

Para 2 Sprint, which one?  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on November 11, 2014, 02:51:05 AM
I'm in skeletool
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 11, 2014, 05:28:16 AM
The list is getting long
01 - Kampfer, Skeletool X
02 - Breezy12, Skeletool CX
03 - HarleyXJGuy, Skeletool
04 - GPS12, Skeletool CX
05 - colt 1911, Skeletool
06 - eddie1115, Skeletool
07 - pietervn, BO MUT
08 - geekdadrepair, SkeleVerde
09 - AdmSlc, Freestyle CX
10 - Timboslice, Skeletool

Welcome Tim, you got some posting to do, refer to Rule #2.
 :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on November 11, 2014, 06:37:53 AM
I'm in with the freestyle CX


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pfrsantos on November 11, 2014, 11:57:24 AM
Anyone entering with the StayGlow blade model?...

Show content
(http://2.bp.blogspot.com/_Z2V0ybeHVIc/S8oQ_TnIXLI/AAAAAAAAD5E/ZvLvEucKiKQ/s1600/IMG_6305.JPG)

 :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 11, 2014, 02:05:25 PM
I'm in with my SkeleVerde

Sent from my Nexus 7 using Tapatalk

In with your what?  :think:

You sure you want to know?  Colored Leathermen (Leathermans?  :think: ) might open up a whole new universe of addiction for you......  >:D

http://forum.multitool.org/index.php/topic,53718.0.html

Smurf! I clicked on the stupid link before I read what you wrote jdevil.  :facepalm:

Para 2 Sprint, which one?  :pok:

Oh you don't have to ask me twice to show off this beauty. Para 2 Forest Green G-10 handle and CTS-204P blade.  :drool:

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/204pPara22.jpg~original)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on November 11, 2014, 02:17:04 PM
Rules question..

I own a MUT and a freestyle, are we able to switch between the different family members of the skeletool during the month? Or just pick one and run with it?


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 11, 2014, 02:21:32 PM
I'm in with the freestyle CX


Dang that's what I am talking about, a whole month with a Freestyle.

Now that is what I like to see someone willing to go hard to the paint.  :tu:

Oh I also have a rules question.

So lets say I find a cheap Rebar to mod my Wave with. Can I work ON other tools during the month?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Etherealicer on November 11, 2014, 02:59:23 PM
I'm not a fan of the SkeleTool. But it has the almost perfect tool load for me. Maybe I should get a SkeleTool and go for the challenge, hoping it grows on me. :think:

Anyway, my VCR is programmed, so I won't miss this...
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 11, 2014, 03:16:42 PM
Maybe I should get a SkeleTool and go for the challenge, hoping it grows on me. :think:


(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/yes.jpg~original)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 11, 2014, 05:59:38 PM
Rules question..

I own a MUT and a freestyle, are we able to switch between the different family members of the skeletool during the month? Or just pick one and run with it?


-AdmSlc

* Any one MT from the Skeletool family would be accepted, that include : MUT, Skeletool, Freestyle, Style CS/PS & Style.
You should not switch tool between above selection during the challenge, so choose wisely before the challenge began.


Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 11, 2014, 06:00:34 PM

Oh I also have a rules question.

So lets say I find a cheap Rebar to mod my Wave with. Can I work ON other tools during the month?

4) If you need a dedicated tool for a task, please do so. No one is asking you to cut down a tree or trim your finger nails with a Skeletool…  Please use common sense.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 11, 2014, 06:35:27 PM

Oh I also have a rules question.

So lets say I find a cheap Rebar to mod my Wave with. Can I work ON other tools during the month?

4) If you need a dedicated tool for a task, please do so. No one is asking you to cut down a tree or trim your finger nails with a Skeletool…  Please use common sense.


Yeah I reread the rules but thought tinkering with another MT would break the spirit of the rules.

A lot of this challenge is having to leave the other toys in the drawer.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on November 11, 2014, 07:10:06 PM

Oh I also have a rules question.

So lets say I find a cheap Rebar to mod my Wave with. Can I work ON other tools during the month?

4) If you need a dedicated tool for a task, please do so. No one is asking you to cut down a tree or trim your finger nails with a Skeletool…  Please use common sense.


Yeah I reread the rules but thought tinkering with another MT would break the spirit of the rules.

A lot of this challenge is having to leave the other toys in the drawer.

I didn't think the other MTs had to stay in the drawer... I was under the impression that you're still allowed to play with them, clean them, sharpen them, mod them, etc.... but you were supposed to stick with ONE member of the Skeletool family for anytime you actually USE a MT (especially for EDC).

Do I have that about right, Kampfer? :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 11, 2014, 07:12:13 PM
Yes, you got a cookie!  :2tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 11, 2014, 07:22:56 PM
Ok then got it.

I want a cookie too!  :ahhh
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on November 11, 2014, 08:14:45 PM
She isn't officially participating, but is using her style Cs daily. we'll be watching how you pros do it out there, good luck!
Ps.... She wanted hers painted like daddy  :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 11, 2014, 08:18:45 PM
Skeletool, $35 shipped in USA.
http://www.westmarine.com/buy/leatherman--skeletool-cp-multi-tool--10172583
No excuse not to play.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 11, 2014, 08:34:01 PM
Skeletool, $35 shipped.
http://www.westmarine.com/buy/leatherman--skeletool-cp-multi-tool--10172583
No excuse not to play.

Dang that is like $10 less then I paid.  :rant:

There goes all of your excuses, game on.  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 11, 2014, 08:34:19 PM
For $35 + a reasonable shipping I would join. But westmarine wants $36 for the slowest shipping to Norway :(


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 11, 2014, 08:37:33 PM
She isn't officially participating, but is using her style Cs daily. we'll be watching how you pros do it out there, good luck!
Ps.... She wanted hers painted like daddy  :D

Very cool man.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 11, 2014, 09:05:17 PM
For $35 + a reasonable shipping I would join. But westmarine wants $36 for the slowest shipping to Norway :(


Sent from a device made from star dust using tapatalk

I don't even want to know how much it would cost for shipping here.
And for $5 more I could get the Blacktip.
Why can't MUTs be cheap.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 11, 2014, 09:15:43 PM
Para 2 Sprint, which one?  :pok:

Oh you don't have to ask me twice to show off this beauty. Para 2 Forest Green G-10 handle and CTS-204P blade.  :drool:

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/204pPara22.jpg~original)
:gimme:   :drool:   :gimme:   :drool:   :gimme:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 11, 2014, 09:16:30 PM

For $35 + a reasonable shipping I would join. But westmarine wants $36 for the slowest shipping to Norway :(


Sent from a device made from star dust using tapatalk

I don't even want to know how much it would cost for shipping here.
And for $5 more I could get the Blacktip.
Why can't MUTs be cheap.

I dont even want think about what it would cost to send something from here to you!


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: getahl on November 11, 2014, 09:19:49 PM
I'm in with my Style CS. I have nearly zero need for pliers on a daily basis, but scissors are a constant. Everyone else is using a nearly full-sized knife...coming off the minimal SAK challenge, this will be cake
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 11, 2014, 09:22:47 PM
Para 2 Sprint, which one?  :pok:

Oh you don't have to ask me twice to show off this beauty. Para 2 Forest Green G-10 handle and CTS-204P blade.  :drool:

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/204pPara22.jpg~original)
:gimme:   :drool:   :gimme:   :drool:   :gimme:

I know right?

Bad part is it should have already been here but for some reason got returned to the guy I bought it from.

Now I got to wait for it all over again.  :rant:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on November 11, 2014, 09:25:17 PM
For $35 + a reasonable shipping I would join. But westmarine wants $36 for the slowest shipping to Norway :(


Sent from a device made from star dust using tapatalk

I don't even want to know how much it would cost for shipping here.
And for $5 more I could get the Blacktip.
Why can't MUTs be cheap.
Ahem!
So carry a pair of pliers and some wire cutters. You are allowed to use real tools for umm real jobs.

I got a feeling someone is scared to play?  :pok:

I did miss that one. Not that it matters though, I don't have a Skeletool or MUT or any spare cash.
You're borrowing mine. No excuses now.  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on November 11, 2014, 10:01:56 PM
She isn't officially participating, but is using her style Cs daily. we'll be watching how you pros do it out there, good luck!
Ps.... She wanted hers painted like daddy  :D

Very cool man.

 :D its her first multi tool, from Kampfer. With the contingency that she has to become a mto member and give a review of her LM. So far the scissors have gotten the most use.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 11, 2014, 10:13:15 PM
01 - Kampfer, Skeletool X
02 - Breezy12, Skeletool CX
03 - HarleyXJGuy, Skeletool
04 - GPS12, Skeletool CX
05 - colt 1911, Skeletool
06 - eddie1115, Skeletool
07 - pietervn, BO MUT
08 - geekdadrepair, SkeleVerde
09 - AdmSlc, Freestyle CX
10 - Timboslice, Skeletool
11 - getahl, Style CS

Unofficial Challenger: JBW1's daughter, Style CS
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 11, 2014, 10:21:36 PM
So far I sent MT to UK, Netherlands, Germany & NZ, all about $15.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 11, 2014, 10:39:09 PM
So far I sent MT to UK, Netherlands, Germany & NZ, all about $15.

Sure but shop quotes are just killer.
I've got a knife coming atm that cost less than $15 to send, the shop wanted $45 and that was their cheapest option.
The cost of sending from NZ more than doubled a few months ago, sending a MT to America registered cost US$40.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JAfromMn on November 11, 2014, 11:33:56 PM
In honor of you all who are trying to get by with just a skeletool for the month I took a pic of mine . I'm carrying it today instead of my normal sak to back up my surge.  (http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-11-11150947_zps3a22adaa.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-11-11150947_zps3a22adaa.jpg.html)


Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 11, 2014, 11:42:20 PM
 :clap:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on November 12, 2014, 12:00:27 AM
So far I sent MT to UK, Netherlands, Germany & NZ, all about $15.

this has been my experience as well, shipping to UK, Greece, Australia, NZ, Canada, & Israel. :salute:

Yes, you got a cookie!  :2tu:

:D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: billyboy4873 on November 12, 2014, 01:16:35 AM
Sorry, it took me almost Forty years to develop this Skeletool/ victorinox Recruit system.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 12, 2014, 01:19:33 AM
Sorry, it took me almost Forty years to develop this Skeletool/ victorinox Recruit system.
Welcome to MTO billy,
You mean you EDC a Skeletool and a victorinox Recruit?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on November 12, 2014, 01:49:03 AM
In honor of you all who are trying to get by with just a skeletool for the month I took a pic of mine . I'm carrying it today instead of my normal sak to back up my surge.  (http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-11-11150947_zps3a22adaa.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-11-11150947_zps3a22adaa.jpg.html)
:sa: :sa: nice!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: captain spaulding on November 12, 2014, 01:52:22 AM
What bit is in the holder on the handle?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JAfromMn on November 12, 2014, 02:08:18 AM
What bit is in the holder on the handle?


A special little tool. I think less than 12 where made.

A tt pocket tools leatherman bit holder.

154cm steel and very handy.

(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-11-11190553_zpsc6cd43c9.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-11-11190553_zpsc6cd43c9.jpg.html)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: captain spaulding on November 12, 2014, 03:22:38 AM
Excuse my ignorance on this, but how is it used?

I'm a little slow tonight.  :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 12, 2014, 03:26:14 AM
Excuse my ignorance on this, but how is it used?

I'm a little slow tonight.  :D
Leatherman flat bits can be use without the entire Lm MT, thanks to that little gadget
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JAfromMn on November 12, 2014, 03:51:56 AM
Excuse my ignorance on this, but how is it used?

I'm a little slow tonight.  :D

I'm a little slow every night.



It works very similar to this. http://www.countycomm.com/edckey.html
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: captain spaulding on November 12, 2014, 04:44:52 AM
Excuse my ignorance on this, but how is it used?

I'm a little slow tonight.  :D

I'm a little slow every night.



It works very similar to this. http://www.countycomm.com/edckey.html

Ahh ok. So it is to use the bits without the tool.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on November 12, 2014, 05:10:45 AM
I've never seen that little bit helper. Drool..... I need one of those.


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 12, 2014, 07:06:15 AM
For $35 + a reasonable shipping I would join. But westmarine wants $36 for the slowest shipping to Norway :(


Sent from a device made from star dust using tapatalk

I don't even want to know how much it would cost for shipping here.
And for $5 more I could get the Blacktip.
Why can't MUTs be cheap.
Ahem!
So carry a pair of pliers and some wire cutters. You are allowed to use real tools for umm real jobs.

I got a feeling someone is scared to play?  :pok:

I did miss that one. Not that it matters though, I don't have a Skeletool or MUT or any spare cash.
You're borrowing mine. No excuses now.  :pok:

Why aren't you on the list eh?  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on November 12, 2014, 08:04:06 AM
Why aren't you on the list eh?  :pok:
Because I don't EDC anything. I sit in an office picking my nose all day. I could carry my Skele for a month but I won't need to use it, so it would hardly be a challenge.

So why do I have multitools at all?  :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 12, 2014, 09:43:29 AM
She isn't officially participating, but is using her style Cs daily. we'll be watching how you pros do it out there, good luck!
Ps.... She wanted hers painted like daddy  :D

Very cool man.

 :D its her first multi tool, from Kampfer. With the contingency that she has to become a mto member and give a review of her LM. So far the scissors have gotten the most use.

Even cooler yet. Well done K.

So far I sent MT to UK, Netherlands, Germany & NZ, all about $15.

Sure but shop quotes are just killer.
I've got a knife coming atm that cost less than $15 to send, the shop wanted $45 and that was their cheapest option.
The cost of sending from NZ more than doubled a few months ago, sending a MT to America registered cost US$40.

Dang Zoid even with shipping we could make a bundle selling Surges in your far away land. Not to mention hooking up MTO members with Skeletools.


Sorry, it took me almost Forty years to develop this Skeletool/ victorinox Recruit system.

Yeah what K said. Welcome Billy, I am sure you will love it here.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on November 12, 2014, 01:36:35 PM
Why aren't you on the list eh?  :pok:
Because I don't EDC anything. I sit in an office picking my nose all day. I could carry my Skele for a month but I won't need to use it, so it would hardly be a challenge.

So why do I have multitools at all?  :think:

Dude..... that's what the pliers are for.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on November 12, 2014, 02:22:07 PM

Why aren't you on the list eh?  :pok:
Because I don't EDC anything. I sit in an office picking my nose all day. I could carry my Skele for a month but I won't need to use it, so it would hardly be a challenge.

So why do I have multitools at all?  :think:

Dude..... that's what the pliers are for.
rofl !!


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: afinitaln on November 12, 2014, 02:32:10 PM
To much work for just a chance, I don't have a skeltool, so I have to sit this out anyway.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 12, 2014, 02:59:59 PM
To much work for just a chance, I don't have a skeltool, so I have to sit this out anyway.

You can score a Skelly for like $35 and the prize is not the point of this excercise. We do it for the pain and derived enjoyment of watching others suffer. Or maybe that is just me.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 12, 2014, 03:01:33 PM
To much work for just a chance, I don't have a skeltool, so I have to sit this out anyway.

You can score a Skelly for like $35 and the prize is not the point of this excercise. We do it for the pain and derived enjoyment of watching others suffer. Or maybe that is just me.
Not just you......>:D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 12, 2014, 07:26:52 PM
One of these is going to Norway.  >:D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 12, 2014, 08:46:42 PM

One of these is going to Norway.  >:D

:salute:
Thank you Kampfer.
Now I have no excuse for not entering :D


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 12, 2014, 08:53:18 PM
Im entering the challenge thanks to Kampfer, but I will not be a contestant for the prize.


01 - Kampfer, Skeletool X
02 - Breezy12, Skeletool CX
03 - HarleyXJGuy, Skeletool
04 - GPS12, Skeletool CX
05 - colt 1911, Skeletool
06 - eddie1115, Skeletool
07 - pietervn, BO MUT
08 - geekdadrepair, SkeleVerde
09 - AdmSlc, Freestyle CX
10 - Timboslice, Skeletool
11 - getahl, Style CS
12 - Grathr, Skeletool

Unofficial Challenger: JBW1's daughter, Style CS


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 12, 2014, 09:12:16 PM
Kampfer.

Do all Sleletools have a skull on them or is that something you did?  :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 12, 2014, 09:55:41 PM
Kampfer.

Do all Sleletools have a skull on them or is that something you did?  :think:
Something I did.


A special little tool. I think less than 12 where made.

A tt pocket tools leatherman bit holder.

JA, any particular reason why you carry that gadget when you already have a MT that uses the bit?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 12, 2014, 11:37:13 PM
JA, any particular reason why you carry that gadget when you already have a MT that uses the bit?

Cause Joel is a big old show off.  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JAfromMn on November 13, 2014, 06:17:34 AM
JA, any particular reason why you carry that gadget when you already have a MT that uses the bit?

Cause Joel is a big old show off.  :pok:

It makes two tools out of one.

meaning that It can hold a screw and tighten the nut at the same time.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on November 13, 2014, 06:26:23 AM
With Christmas coming up this challenge is going to be very brutal. The one I've chosen to use doesn't even have a screwdriver. Talk about a pain in the butt while putting together toys. Looks like I'll have to use my Dewalt power drill instead.


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 13, 2014, 08:37:52 AM
I never understood why they didn't include drivers on Freestyle.  :think:
Unforgiveable.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Lichtbote on November 13, 2014, 11:32:42 AM
I never understood why they didn't include drivers on Freestyle.  :think:
Unforgiveable.

Well, it makes it noticeable shorter.

My wife would never exchange the Freestyle on her keyring with my Skeletool, because it´s just that small amount more in length that would ruin the keyring-performance.

And as both versions are available ..... if someone wants the drivers, he can always buy the Skele instead the Freestyle.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 13, 2014, 06:26:10 PM
She is hardcore, freestyle on key ring.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 13, 2014, 06:31:52 PM
Alright, thanks to SolomonKane79, I have a Skeletool CX on the way and will be able to participate in the challenge.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 13, 2014, 06:38:45 PM
Alright, thanks to SolomonKane79, I have a Skeletool CX on the way and will be able to participate in the challenge.

Uh oh look who moved into the neighborhood. There goes property values.  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 13, 2014, 06:46:03 PM
LMAO!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Lichtbote on November 13, 2014, 10:05:20 PM
She is hardcore, freestyle on key ring.

Aye.  :D

Well, she´s capable to handling me, and i was not always that sweet and easy as i´m now  ;) - so a freestyle on her keychain is only a minor task.  :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 14, 2014, 03:47:42 AM
She is hardcore, freestyle on key ring.

Aye.  :D

Well, she´s capable to handling me, and i was not always that sweet and easy as i´m now  ;) - so a freestyle on her keychain is only a minor task.  :rofl:

You said you are easy.  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Lichtbote on November 14, 2014, 11:15:48 AM
Aye. But not the pink way.  :D

In my younger years i was a little bit .... "without restraint". She made me the Teddybear i´m now, sometimes grumpy, but now it needs a boatload of bullsmurf to get on the edge enough to start trouble.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on November 16, 2014, 02:34:46 AM
To much work for just a chance, I don't have a skeltool, so I have to sit this out anyway.

You can score a Skelly for like $35 and the prize is not the point of this excercise. We do it for the pain and derived enjoyment of watching others suffer. Or maybe that is just me.
I'm thinking its just a way to get everyone to break out some of the tools that may have gotten dusty.
And ......possibly a touch of sadism
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on November 16, 2014, 03:24:20 AM
I've never thought to make my freestyle a Keychain attachment... I may have to give it a try.


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 16, 2014, 03:35:10 AM
Michael,
Did she attach freestyle to her keys or she attached her keys to freestyle?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 16, 2014, 07:56:35 AM

I'm thinking its just a way to get everyone to break out some of the tools that may have gotten dusty.
And ......probably a lot of sadism


And fixed.

Michael,
Did she attach freestyle to her keys or she attached her keys to freestyle?

Ah the chicken or the egg, a time honored discussion.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 17, 2014, 01:31:35 PM
It looks like the mail people are finally getting there smurf sorted around here.

Guess this makes it official, Robert is in the 30 Day SKTC!

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/1030141245.jpg~original)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on November 17, 2014, 01:42:33 PM
And right when you were getting to know your Rebar,. Withdraw alert.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Lichtbote on November 17, 2014, 01:55:22 PM
Michael,
Did she attach freestyle to her keys or she attached her keys to freestyle?

The keys were first.  :D

But as i do, she also has her keys divided on several keyring setups (home, work, car, ...) that can be combined to whatever is needed, without carrying everything all the time.

So it´s still not to heavy to handle.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 17, 2014, 05:18:44 PM
A technical question:
Can you carry two skeletool related tools? For instance a skeletool in your pocket and a style on you keychain? Or would that be considered cheating? :think:


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 17, 2014, 05:24:54 PM
And right when you were getting to know your Rebar,. Withdraw alert.

I know right?

My first couple of SAKs should be getting here right about the time this thing kicks off.  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 17, 2014, 05:27:43 PM
A technical question:
Can you carry two skeletool related tools?
No, just one tool. Challenging isn't it?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 17, 2014, 05:29:46 PM
Glad the Skeletool arrived ahead of schedule. Also what makes it more interesting is you will be using a rebar right up to the challenge begin, what a contrast in tool load out..
Title: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 17, 2014, 05:32:06 PM
A technical question:
Can you carry two skeletool related tools?
No, just one tool. Challenging isn't it?

:ahhh
Its a proper challenge allright


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 17, 2014, 05:44:16 PM
Glad the Skeletool arrived ahead of schedule. Also what makes it more interesting is you will be using a rebar right up to the challenge begin, what a contrast in tool load out..

Been doing some thinking about this multi tool situation. I know who around here does that right?

There are some tools that I use almost everyday and some that are once every week or so. Then we have stuff like the can opener that don't see much use but when needed it is nice that they are there. Of course nobody likes to talk about them red headed step children that never see the light of day. Looking at you corkscrew and mini driver.

What I am trying to get at is while Little Boy has a awesome set of tools that I actually like. Day in and day out I find myself using the screwdrivers and knife over and over.

Will be interesting to see how much I miss the rest during the SKTC month.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 17, 2014, 05:48:07 PM
Glad the Skeletool arrived ahead of schedule. Also what makes it more interesting is you will be using a rebar right up to the challenge begin, what a contrast in tool load out..

Been doing some thinking about this multi tool situation. I know who around here does that right?

There are some tools that I use almost everyday and some that are once every week or so. Then we have stuff like the can opener that don't see much use but when needed it is nice that they are there. Of course nobody likes to talk about them red headed step children that never see the light of day. Looking at you corkscrew and mini driver.

What I am trying to get at is while Little Boy has a awesome set of tools that I actually like. Day in and day out I find myself using the screwdrivers and knife over and over.

Will be interesting to see how much I miss the rest during the SKTC month.
Amen, most people use knife & drivers most often, which Skeletool offers.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kalans on November 17, 2014, 05:57:07 PM
I have a new Skeletool CX that I am thinking about selling, would anyone be interested?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 17, 2014, 06:05:16 PM
I have a new Skeletool CX that I am thinking about selling, would anyone be interested?
Why don't you enter the Challenge, and sell it after?
I am sure more members will want one after.
This challenge will boost up the popularity of Skeletool, or destroy it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 17, 2014, 06:25:50 PM
Nevermind I can't read I guess.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 17, 2014, 06:26:43 PM

Amen, most people use knife & drivers most often, which Skeletool offers.

That's is what I was trying to say.

Wondering how much I will miss the rest of the tools.
We are going to find out. ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kalans on November 17, 2014, 07:17:31 PM
I have a new Skeletool CX that I am thinking about selling, would anyone be interested?
Why don't you enter the Challenge, and sell it after?
I am sure more members will want one after.
This challenge will boost up the popularity of Skeletool, or destroy it.
True, but if I use it then it won't be new anymore :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 17, 2014, 08:41:35 PM

Amen, most people use knife & drivers most often, which Skeletool offers.

That's is what I was trying to say.

Wondering how much I will miss the rest of the tools.
We are going to find out. ;)

I think you meant something like this.

"We are going to find out.  >:D "
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kalans on November 18, 2014, 02:16:00 AM
My Skeletool is sold now guys, thanks!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JAfromMn on November 19, 2014, 12:49:21 AM
I'm not taking part in this review but I have been carrying my cx more proubly because of it.


(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-11-18141811_zps8c2f9091.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-11-18141811_zps8c2f9091.jpg.html)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 19, 2014, 05:25:01 AM
Carried my new Skelly the last couple of days as a sidekick for Private Little Boy.

Noticed this Skeletool is tight from the factory. Both knife opening and getting to the pliers or driver take concentrated effort.

Is this normal for the Skeletool line?

Maybe its just be both of my Leatherman tools I bought used and my other tools have always been Gerber MP 600's which are known for being looser?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 19, 2014, 07:16:03 AM
I'm not taking part in this review but I have been carrying my cx more proubly because of it.



Thanks for the support JA!  :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 19, 2014, 07:19:23 AM
Gerber MP 600's which are known for being loser?
:o brace yourself!

Your tool needs a break-in, the blade might be benefit from a micro adjustment.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 19, 2014, 07:28:26 AM
Gerber MP 600's which are known for being loser?
:o brace yourself!

Your tool needs a break-in, the blade might be benefit from a micro adjustment.

What the heck kind of tool do I use for blade adjustment?

And that was suppose to read looser but my work computer doesnt underline stuff I spell or type wrong.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: bdAmmo on November 19, 2014, 07:31:09 AM
Gerber MP 600's which are known for being loser?
:o brace yourself!

Your tool needs a break-in, the blade might be benefit from a micro adjustment.

I see what you did there :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 19, 2014, 07:33:08 AM
Gerber MP 600's which are known for being loser?
:o brace yourself!

Your tool needs a break-in, the blade might be benefit from a micro adjustment.

I see what you did there :rofl:

 :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 19, 2014, 07:40:51 AM
Skeletool handles are slip joint, click in close or open position unlike most other LM's.
I think juice series and Swisstool series are the same.


You will need T8 bit to adjust the blade.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: GPS12 on November 19, 2014, 05:25:40 PM
Hi Kampfer

I have to give up unfortunately now because I work again in january and so I can`t do the challenge in december.
I was the last days in the hospital and now I have to stay at home the rest of november and the whole december for recovery :facepalm:

Sorry..............
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: getahl on November 19, 2014, 05:25:42 PM
In retrospect, I want to change my entry to a normal Skele. I want a normal sized blade!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 19, 2014, 06:57:07 PM
All good, here is current list of challengers.

01 - Kampfer, Skeletool X
02 - Breezy12, Skeletool CX
03 - HarleyXJGuy, Skeletool
04 - GPS12, Skeletool CX
05 - colt 1911, Skeletool
06 - eddie1115, Skeletool
07 - pietervn, BO MUT
08 - geekdadrepair, SkeleVerde
09 - AdmSlc, Freestyle CX
10 - Timboslice, Skeletool
11 - getahl, Skeletool
12 - Grathr, Skeletool
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 19, 2014, 10:14:06 PM
I'm not taking part in this review but I have been carrying my cx more proubly because of it.


(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-11-18141811_zps8c2f9091.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-11-18141811_zps8c2f9091.jpg.html)

Thats what I get for looking at this forum on a work computer.

Totally missed the fat bike photo bomb.  :twak:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kalans on November 19, 2014, 10:51:27 PM
Awesome list guys! I am rooting for ya! I know at Christmas they will be really well used!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: CougarBlades on November 20, 2014, 01:46:26 AM
Still trying to get one in time .....Im really after a cx!! Anybody want to trade for a custom blade?

Cougar Country Outdoors

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 22, 2014, 06:21:33 PM
For those don't know, here is the website of Glenn Klecker, Father of the Skeletool.

http://skeletool.com/index.php
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kalans on November 22, 2014, 06:59:31 PM
For those don't know, here is the website of Glenn Klecker, Father of the Skeletool.

http://skeletool.com/index.php (http://skeletool.com/index.php)
Looks pretty cool!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 24, 2014, 06:11:01 PM
One week until the challenge begun, just so you know, A special guest WILL be monitoring this challenge.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 24, 2014, 06:56:27 PM
Cool!
I hope my skeletool arrives before the start


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kalans on November 24, 2014, 09:49:23 PM
One week until the challenge begun, just so you know, A special guest WILL be monitoring this challenge.
Uh oh, I guess I should've kept mine until after this! :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on November 24, 2014, 10:06:56 PM
One week until the challenge begun, just so you know, A special guest WILL be monitoring this challenge.

looking forward to it! :tu:

will there be a separate thread for us to post updates in? or shall we continue in this thread?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 24, 2014, 10:12:18 PM
Let's keep pushing on!  :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on November 24, 2014, 10:28:18 PM
Let's keep pushing on!  :salute:

 :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 24, 2014, 10:47:06 PM
I'm in!

01 - Kampfer, Skeletool X
02 - Breezy12, Skeletool CX
03 - HarleyXJGuy, Skeletool
04 - GPS12, Skeletool CX
05 - colt 1911, Skeletool
06 - eddie1115, Skeletool
07 - pietervn, BO MUT
08 - geekdadrepair, SkeleVerde
09 - AdmSlc, Freestyle CX
10 - Timboslice, Skeletool
11 - getahl, Skeletool
12 - Grathr, Skeletool
13 - Ductapetech, Skeletool CX
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 25, 2014, 12:46:45 AM
One week until the challenge begun, just so you know, A special guest WILL be monitoring this challenge.

Ill bet you it is going to be Santa Claus!

Will it matter insomuch as the SKTC is concerned if I have been naughty?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 25, 2014, 01:43:12 AM
One week until the challenge begun, just so you know, A special guest WILL be monitoring this challenge.

Ill bet you it is going to be Santa Claus!

Will it matter insomuch as the SKTC is concerned if I have been naughty?
Yes, you had been naughty, you tried to rat me out last night. :twak:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 25, 2014, 02:54:05 AM
One week until the challenge begun, just so you know, A special guest WILL be monitoring this challenge.

Ill bet you it is going to be Santa Claus!

Will it matter insomuch as the SKTC is concerned if I have been naughty?
Yes, you had been naughty, you tried to rat me out last night. :twak:

Whats a little extortion between friends?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 25, 2014, 03:31:06 AM
Here is a pic per the rulez. Could not post ealier as our power went out.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on November 25, 2014, 03:31:41 AM

I'm in!

01 - Kampfer, Skeletool X
02 - Breezy12, Skeletool CX
03 - HarleyXJGuy, Skeletool
04 - GPS12, Skeletool CX
05 - colt 1911, Skeletool
06 - eddie1115, Skeletool
07 - pietervn, BO MUT
08 - geekdadrepair, SkeleVerde
09 - AdmSlc, Freestyle CX
10 - Timboslice, Skeletool
11 - getahl, Skeletool
12 - Grathr, Skeletool
13 - Ductapetech, Skeletool CX

Nice, should be a breeze for you after the compact challenge.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 25, 2014, 08:24:52 AM
Nice Skelly Nate, she is oldie. :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: edap617 on November 25, 2014, 08:34:19 AM
I have a Skeletool and I got this over 2 years ago from one of our fellow MTO members. I used to edc this on and off for a few weeks before. I kinda miss it now and I want to edc it again.

When will this challenge begin?

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 25, 2014, 08:58:28 AM
Dec 1st.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: edap617 on November 25, 2014, 09:16:00 AM
Thanks.

 I may not be qualified to join because I will be travelling for 5 days to Manila by plane on dec. 10. I hesitate to bring my Skeletool because it might be confiscated at the airport.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 26, 2014, 02:21:31 PM

I'm in!

01 - Kampfer, Skeletool X
02 - Breezy12, Skeletool CX
03 - HarleyXJGuy, Skeletool
04 - GPS12, Skeletool CX
05 - colt 1911, Skeletool
06 - eddie1115, Skeletool
07 - pietervn, BO MUT
08 - geekdadrepair, SkeleVerde
09 - AdmSlc, Freestyle CX
10 - Timboslice, Skeletool
11 - getahl, Skeletool
12 - Grathr, Skeletool
13 - Ductapetech, Skeletool CX

Nice, should be a breeze for you after the compact challenge.


Sak's  rule !
Not sure about a breeze, but should be way easier. 
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 26, 2014, 02:21:52 PM
Nice Skelly Nate, she is oldie. :tu:
Thanks!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 26, 2014, 03:04:49 PM
So it turns out my OC Pioneer should be getting here soon so we are going to change the challenge up a little.

It is now called the Official 31-Day SKELETOOL and one OC Pioneer Challenge!

Course I have not talked to someone who is actually any way connected to the SKTAOCPC about this yet so we will say this is semi official for now.

Pretty sure they will be no issues though.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on November 26, 2014, 06:19:38 PM

(http://forum.multitool.org/index.php?action=dlattach;topic=49951.0;attach=133247;image)
Should you dare to enter, you agree to spend the entire December of 2014 equipping with a stylish Skeletool* as your SOLE Multi-Tool / Knife and nothing more.
So put away your SAK, folder and keychain tools, etc for hibernation.

* Any one MT from the Skeletool family would be accepted, that include : MUT, Skeletool, Freestyle, Style CS/PS & Style.
You should not switch tool between above selection during the challenge, so choose wisely before the challenge began.

A) You can bring as many exchangeable bits as you like / need.
B) Hacked Skeletool are welcome to enter.
Here is an excellent write up on Skeletool Faimly (http://forum.multitool.org/index.php/topic,52199.0.html) by Chako.

To be eligible for the giveaway (relying on the honor system):

1) This challenge runs from December 1st through December 31st. You must participate all 31 days.

2) You must have posts count of 31 or more by December 31st, 2014.

3) Reply to this thread with a photo of your Skeletool you will be participating the challenge with, you are encouraged to express (praise or criticize) your experience with the Skeletool during the challenge.

4) If you need a dedicated tool for a task, please do so. No one is asking you to cut down a tree or trim your finger nails with a Skeletool…  Please use common sense. If you gave up and going back to a bigger multi-tool, shout out, no one will laugh at you.

5) Obey your local laws, regulations and work place, school polices, etc.

6) Be safe and be prepared.

Should you survive and completed the challenge, you get a shot at winning the new in box Super Tool 300 + Micra combo pack.
One of the admins will draw a winner on January 1st, 2015.
(http://forum.multitool.org/index.php?action=dlattach;topic=49951.0;attach=133249;image)

What about an extension ?

(http://tapatalk.imageshack.com/v2/14/11/26/33b4e8b22113793eb16028051ad76c2b.jpg)

Would that be allowed ?


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 26, 2014, 06:26:56 PM
Yes of course. Did you get your 154CM blade?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on November 26, 2014, 06:43:33 PM

Yes of course. Did you get your 154CM blade?

No, couldn't come up with the trade item needed .


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 26, 2014, 10:31:17 PM
You gonna be in the challenge Colt?
You know you want too. :poke:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kirk13 on November 26, 2014, 10:49:48 PM
Thanks.

 I may not be qualified to join because I will be travelling for 5 days to Manila by plane on dec. 10. I hesitate to bring my Skeletool because it might be confiscated at the airport.

I think you should be given a by for those days :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 26, 2014, 11:07:04 PM
You gonna be in the challenge Colt?
You know you want too. :poke:
He is on the list.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on November 26, 2014, 11:12:55 PM
I'm getting excited for this challenge.


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on November 27, 2014, 02:01:33 PM
So here's my load out.

(http://tapatalk.imageshack.com/v2/14/11/27/ddf23866674238310ccb5bfbe3a7aeed.jpg)

Think I'll pocket carry the skele and sheath the bits an extension.

(http://tapatalk.imageshack.com/v2/14/11/27/ce6b2f88d1a2bd44ea389fb338cc699d.jpg)

Gotta love the flat soft Gerber sheaths.

(http://tapatalk.imageshack.com/v2/14/11/27/041a70c429d78fea9a56ecc3b8af49a2.jpg)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 27, 2014, 02:36:25 PM
Nice set up Colt!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on November 27, 2014, 02:49:51 PM

Nice set up Colt!

Thanks.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 27, 2014, 04:05:00 PM
So here's my load out.

(http://tapatalk.imageshack.com/v2/14/11/27/ddf23866674238310ccb5bfbe3a7aeed.jpg)

Think I'll pocket carry the skele and sheath the bits an extension.


Finally the excuse I need to buy a bit set and extension.

Thanks Colt and the SKTAOCPC!
Title: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on November 27, 2014, 05:45:21 PM
So here's my load out.

(http://tapatalk.imageshack.com/v2/14/11/27/ddf23866674238310ccb5bfbe3a7aeed.jpg)

Think I'll pocket carry the skele and sheath the bits an extension.


Finally the excuse I need to buy a bit set and extension.

Thanks Colt and the SKTAOCPC!

A must have especially if you have a wave IMO .


Sak's  rule !
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: getahl on November 28, 2014, 02:13:10 AM
I'm going to have to bow out before the challenge even begins. My baby girl, seven weeks old, just underwent surgery to correct biliary atresia, so we'll be here at Children's Hospital LA for the next two weeks or so. Please send prayers, smoke, and good vibes our way.

While I won't be participating, I will be living vicariously through this thread. Make it an interesting one! I do have a Style CS with me right now, never know when you might need a small pair of scissors.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 28, 2014, 02:52:46 AM
We are sorry to hear that, best wishes to you and your family.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 28, 2014, 03:48:54 AM
Yeah best wishes man.

Your girl and family are in our prayers.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 28, 2014, 04:12:22 AM
getahl, I think you are still part of the challenge as long as you carry the Style CS.

Updated list:
01 - Kampfer, Skeletool X
02 - Powernoodle, Skeletool
03 - Breezy12, Skeletool CX
04 - HarleyXJGuy, Skeletool
05 - GPS12, Skeletool CX
06 - colt 1911, Skeletool
07 - eddie1115, Skeletool
08 - pietervn, BO MUT
09 - geekdadrepair, SkeleVerde
10 - AdmSlc, Freestyle CX
11 - Timboslice, Skeletool
12 - getahl, Style CS
13 - Grathr, Skeletool
14 - Ductapetech, Skeletool CX

Unofficial Challenger: JBW1's daughter, Style CS
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: jerseydevil on November 28, 2014, 04:18:33 AM
Oh damn Getahl, I'm sorry to hear that.  :(  You, your little girl, and your family are in my prayers.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on November 28, 2014, 01:53:31 PM
Sorry to hear that. Good vibes and prayers coming your way.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 28, 2014, 04:21:15 PM
Sorry to hear that Getahl. You and your familly are in my thoughts.



Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 28, 2014, 04:27:41 PM
Getahl, sorry to hear about your little girl. Best of luck and wishes man.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on November 28, 2014, 04:48:23 PM
Oh damn Getahl, I'm sorry to hear that.  :(  You, your little girl, and your family are in my prayers.

Ditto :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: derekmac on November 28, 2014, 05:34:15 PM
I'm going to have to bow out before the challenge even begins. My baby girl, seven weeks old, just underwent surgery to correct biliary atresia, so we'll be here at Children's Hospital LA for the next two weeks or so. Please send prayers, smoke, and good vibes our way.

While I won't be participating, I will be living vicariously through this thread. Make it an interesting one! I do have a Style CS with me right now, never know when you might need a small pair of scissors.
You guys will be in my thoughts.  I wish you all the very best!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on November 29, 2014, 06:18:10 AM
Skeletools on sale at sportsmans warehouse for 40$. I'm hoping I may be joining the clan if all goes well tomorrow :D
http://www.sportsmanswarehouse.com/sportsmans/Leatherman-Skeletool-Multi-Tool/productDetail/Multi-Tools/prod9999000102/cat100816
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 29, 2014, 07:01:34 AM
Skeletools on sale at sportsmans warehouse for 40$. I'm hoping I may be joining the clan if all goes well tomorrow :D
http://www.sportsmanswarehouse.com/sportsmans/Leatherman-Skeletool-Multi-Tool/productDetail/Multi-Tools/prod9999000102/cat100816

Nice.  :tu:

You have a OC Pioneer also?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: getahl on November 29, 2014, 06:07:59 PM
Thanks fire the well wishes, all. It's not going to be a fun ride.

Anyway, sorry for the derailment, here's my carry fit December, an early model Style CS, with the speed holes (bonus points for those who get the reference), that I used a diamond sharpener on to add a v-grind to the blade. There's something about coal grinds that drives me nuts.
(http://img.photobucket.com/albums/v236/getahl/Mobile%20Uploads/20141129_065844.jpg)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 29, 2014, 07:00:54 PM
Thanks to Kanpfer I now have a Skeletool, and is ready to start this challenge. :salute:

From monday morning this
(http://tapatalk.imageshack.com/v2/14/11/29/5afcb429fe94c7546c48928f09360b3e.jpg)
Will have to do all the jobs I use these tools for:
(http://tapatalk.imageshack.com/v2/14/11/29/82389984bff5f74de14579af4b0a4665.jpg)



Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on November 29, 2014, 07:06:18 PM
Skeletools on sale at sportsmans warehouse for 40$. I'm hoping I may be joining the clan if all goes well tomorrow :D
http://www.sportsmanswarehouse.com/sportsmans/Leatherman-Skeletool-Multi-Tool/productDetail/Multi-Tools/prod9999000102/cat100816

Nice.  :tu:

You have a OC Pioneer also?

No sir
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on November 29, 2014, 10:24:58 PM
Thanks fire the well wishes, all. It's not going to be a fun ride.

Anyway, sorry for the derailment, here's my carry fit December, an early model Style CS, with the speed holes (bonus points for those who get the reference), that I used a diamond sharpener on to add a v-grind to the blade. There's something about coal grinds that drives me nuts.
The Simpsons! When Homer is buying a new car and the mob are shooting at him.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: getahl on November 29, 2014, 11:05:17 PM
Thanks fire the well wishes, all. It's not going to be a fun ride.

Anyway, sorry for the derailment, here's my carry fit December, an early model Style CS, with the speed holes (bonus points for those who get the reference), that I used a diamond sharpener on to add a v-grind to the blade. There's something about coal grinds that drives me nuts.
The Simpsons! When Homer is buying a new car and the mob are shooting at him.
Good man
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 30, 2014, 12:56:06 AM

Will have to do all the jobs I use these tools for:
(http://tapatalk.imageshack.com/v2/14/11/29/82389984bff5f74de14579af4b0a4665.jpg)



Sent from a device made from star dust using tapatalk
I don't see why not, other than you might need micro drivers from bit kit.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Aloha on November 30, 2014, 05:22:16 AM
This is going to be interesting. 
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 30, 2014, 06:08:21 AM


Will have to do all the jobs I use these tools for:
(http://tapatalk.imageshack.com/v2/14/11/29/82389984bff5f74de14579af4b0a4665.jpg)



Sent from a device made from star dust using tapatalk
I don't see why not, other than you might need micro drivers from bit kit.

No awl (i use that a lot) , no scissors, no saw (no big loss) , no prybar, no tweezers.
I have however gained pliers, and might be able to do some prying with the carabiner/bottleopener :think:
And the knife will have to do the awl and scissor work.
You are probably right, Ill manage.
Im looking forward to read about how the heavier tool users will manage.


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 30, 2014, 06:17:09 AM
You said heavy tool user.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 30, 2014, 06:24:40 AM


No awl (i use that a lot) , no scissors, no saw (no big loss) , no prybar, no tweezers.
I have however gained pliers, and might be able to do some prying with the carabiner/bottleopener :think:
And the knife will have to do the awl and scissor work.
You are probably right, Ill manage.
Im looking forward to read about how the heavier tool users will manage.


You'll live. But if you to pry, get a prybar.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on November 30, 2014, 06:29:34 AM
Watching this but not participating, I am getting a Skeletool and will carry it along with my usual SAKs in solidarity with you all.
In December I usually use my actual multitool (Blast) the most as I'm away camping, fishing, boating, motorbikes, etc.
I will leave it in the 4x4 and carry the Skele.

I have been eyeing out the Skeletool as a pliers addition to my daily carry and this interesting challenge has pushed me over the line.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 30, 2014, 07:21:37 AM
<- This man is evil.  >:D
this interesting challenge has pushed me over the line.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 30, 2014, 07:53:50 AM
I feel kinda bad about this.

The rest of you don't have a chance in this challenge because of the head start I am going to get. It is like 12 whole hours.

No way you can recover from something like that.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 30, 2014, 08:34:31 AM
I feel kinda bad about this.

The rest of you don't have a chance in this challenge because of the head start I am going to get. It is like 12 whole hours.

No way you can recover from something like that.

You're lucky I'm not participating.  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 30, 2014, 08:42:52 AM
I feel kinda bad about this.

The rest of you don't have a chance in this challenge because of the head start I am going to get. It is like 12 whole hours.

No way you can recover from something like that.

You're lucky I'm not participating.  :whistle:

I know right? Seeing your posts everyday would make my head hurt.

Wait are you talking about the time thing?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 30, 2014, 09:10:59 AM
That is a good one.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on November 30, 2014, 10:41:21 AM
You are evil.
My new Skeletool.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on November 30, 2014, 11:43:48 AM
I feel kinda bad about this.

The rest of you don't have a chance in this challenge because of the head start I am going to get. It is like 12 whole hours.

No way you can recover from something like that.
In that case, as December is 15 minutes away for me, count me in.  >:D
(http://i529.photobucket.com/albums/dd338/syncop8r/Skeletool%20CX/3b729e77-73d6-45bf-a078-32898e6e4cfc.jpg) (http://s529.photobucket.com/user/syncop8r/media/Skeletool%20CX/3b729e77-73d6-45bf-a078-32898e6e4cfc.jpg.html)
I'll probably hardly use it, and I really want to take my Ranger hiking in the holidays... we'll see.

01 - Kampfer, Skeletool X
02 - Powernoodle, Skeletool
03 - Breezy12, Skeletool CX
04 - HarleyXJGuy, Skeletool
05 - GPS12, Skeletool CX
06 - colt 1911, Skeletool
07 - eddie1115, Skeletool
08 - pietervn, BO MUT
09 - geekdadrepair, SkeleVerde
10 - AdmSlc, Freestyle CX
11 - Timboslice, Skeletool
12 - getahl, Style CS
13 - Grathr, Skeletool
14 - Ductapetech, Skeletool CX
15 - Syncop8r, Skeletool CX
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 30, 2014, 11:49:11 AM
New Zealand Represent.  :drink:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on November 30, 2014, 11:51:47 AM
You are evil.
My new Skeletool.
Or is it
01 - Kampfer, Skeletool X
02 - Powernoodle, Skeletool
03 - Breezy12, Skeletool CX
04 - HarleyXJGuy, Skeletool
05 - GPS12, Skeletool CX
06 - colt 1911, Skeletool
07 - eddie1115, Skeletool
08 - pietervn, BO MUT
09 - geekdadrepair, SkeleVerde
10 - AdmSlc, Freestyle CX
11 - Timboslice, Skeletool
12 - getahl, Style CS
13 - Grathr, Skeletool
14 - Ductapetech, Skeletool CX
15 - shark_za, Skeletool
16 - Syncop8r, Skeletool CX
???
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on November 30, 2014, 11:52:57 AM
New Zealand Represent.  :drink:
:cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 30, 2014, 11:54:49 AM
You are evil.
My new Skeletool.
Or is it
01 - Kampfer, Skeletool X
02 - Powernoodle, Skeletool
03 - Breezy12, Skeletool CX
04 - HarleyXJGuy, Skeletool
05 - GPS12, Skeletool CX
06 - colt 1911, Skeletool
07 - eddie1115, Skeletool
08 - pietervn, BO MUT
09 - geekdadrepair, SkeleVerde
10 - AdmSlc, Freestyle CX
11 - Timboslice, Skeletool
12 - getahl, Style CS
13 - Grathr, Skeletool
14 - Ductapetech, Skeletool CX
15 - shark_za, Skeletool
16 - Syncop8r, Skeletool CX
???

Nar, he didn't want in.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 30, 2014, 11:56:11 AM
All the best you lot.  :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 30, 2014, 12:46:27 PM
Might as well start on NZ time with you. Skeletool is now in my pocket, and the SAK is on the shelf.
Good luck all! :salute:


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on November 30, 2014, 12:51:03 PM
You are evil.
My new Skeletool.
Or is it
01 - Kampfer, Skeletool X
02 - Powernoodle, Skeletool
03 - Breezy12, Skeletool CX
04 - HarleyXJGuy, Skeletool
05 - GPS12, Skeletool CX
06 - colt 1911, Skeletool
07 - eddie1115, Skeletool
08 - pietervn, BO MUT
09 - geekdadrepair, SkeleVerde
10 - AdmSlc, Freestyle CX
11 - Timboslice, Skeletool
12 - getahl, Style CS
13 - Grathr, Skeletool
14 - Ductapetech, Skeletool CX
xx - shark_za, Skeletool
15 - Syncop8r, Skeletool CX
???
Spectator giving moral support.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: muddog15 on November 30, 2014, 01:12:11 PM
I have a Skeletool that I EDC I use it all of the time. My Surge stays in my EDC bag most of the time.  I use my Skeletool for almost everything.

Sent from my SM-N910P using Tapatalk

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on November 30, 2014, 01:57:03 PM
New Zealand Represent.  :drink:

You guys know there are no farm animals involved with this contest right?  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 30, 2014, 04:51:03 PM
Go go go Team Skelelly!
 :multi:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on November 30, 2014, 05:54:40 PM
I have already found a reason I cannot only carry a Skelly.

Biltong.

You cannot give the blade a quick field clean, the holes in the blade retain a bit of gunk till you can get somewhere or something to get in there.
Not a food knife.

Vic Compact + Skelly is looking like my winning combo though.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on November 30, 2014, 08:04:59 PM
Tuff it`s going to be, but let`s give it a try! Need to remove surge from belt and style ps from keychain.
Choosed BO MUT to challege with.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 30, 2014, 08:19:59 PM
Welcome, you have some posting to do, you must have at least 31 posts by the end of this challenge.

Updated list:
01 - Kampfer, Skeletool X
02 - Powernoodle, Skeletool
03 - Breezy12, Skeletool CX
04 - HarleyXJGuy, Skeletool
05 - GPS12, Skeletool CX
06 - colt 1911, Skeletool
07 - eddie1115, Skeletool
08 - pietervn, BO MUT
09 - geekdadrepair, SkeleVerde
10 - AdmSlc, Freestyle CX
11 - Timboslice, Skeletool
12 - getahl, Style CS
13 - Grathr, Skeletool
14 - Ductapetech, Skeletool CX
15 - Syncop8r, Skeletool CX
16 - kmfdm, MUT

Unofficial Challenger: JBW1's daughter, Style CS
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on November 30, 2014, 08:26:05 PM
That`s another challenge to me  ::) I try my best.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on November 30, 2014, 09:03:01 PM
After using the skeletool this afternoon I decided that I did not like the CE blade. Nothing particular about the skeletools blade VS other CE blades. I just dont like CE blades.
So I just performed my first ever proper mod.
I recently bought a bunch of second class LM etched laminated blades from Texas Tool crafters. One of them was a skeletool blade in pretty good nic, but with no edge.
So I spent an hour on a water wheel stone and grinding stone and managed to free hand a OK edge on it.
Getting it to fit was a pain, but somehow it all came together in the end :)
(http://tapatalk.imageshack.com/v2/14/11/30/f70393112dc5325eb66c05fd818d0c0e.jpg)
(http://tapatalk.imageshack.com/v2/14/11/30/c1ba5453117454245081197ae260800f.jpg)
If I ever get let down by the blade of this Skeletool, I can only blame my self.



Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on November 30, 2014, 09:08:48 PM
Nicely done :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on November 30, 2014, 09:24:10 PM
Good luck to all you participants :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 30, 2014, 09:27:02 PM
That looks good!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 30, 2014, 09:30:49 PM
All right, I believe I am ready to go. BRING IT ON!!!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on November 30, 2014, 10:04:44 PM
 :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on November 30, 2014, 10:05:54 PM

Good set up there nate  :gimme:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on November 30, 2014, 10:06:38 PM
Thanks man!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on November 30, 2014, 10:09:37 PM
New Zealand Represent.  :drink:

You guys know there are no farm animals involved with this contest right?  :pok:
I assumed that was up to the individual.  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on November 30, 2014, 10:14:20 PM
Nice work Grathr.  :tu:  :tu:  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 01, 2014, 01:33:06 AM
After using the skeletool this afternoon I decided that I did not like the CE blade. Nothing particular about the skeletools blade VS other CE blades. I just dont like CE blades.
So I just performed my first ever proper mod.
I recently bought a bunch of second class LM etched laminated blades from Texas Tool crafters. One of them was a skeletool blade in pretty good nic, but with no edge.
So I spent an hour on a water wheel stone and grinding stone and managed to free hand a OK edge on it.
Getting it to fit was a pain, but somehow it all came together in the end :)
(http://tapatalk.imageshack.com/v2/14/11/30/f70393112dc5325eb66c05fd818d0c0e.jpg)
(http://tapatalk.imageshack.com/v2/14/11/30/c1ba5453117454245081197ae260800f.jpg)
If I ever get let down by the blade of this Skeletool, I can only blame my self.



Sent from a device made from star dust using tapatalk
Sorry to ask an obvious question, to most, but what's a CE blade? And what kind of metal is that etched blade, looks cool, like a faux Damascus blade haha
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 01, 2014, 01:36:05 AM
CE stands for combo edge, half serrated and half plain.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 01, 2014, 01:43:33 AM
Gottcha :D thanks.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 01, 2014, 01:47:38 AM

Nice work Grathr.  :tu:  :tu:  :tu:

+ 1 ... I'm not fond of the combo either, but it's going to get hammered this month anyways.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 01, 2014, 01:48:48 AM

All right, I believe I am ready to go. BRING IT ON!!!

Nice kit !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 01, 2014, 01:57:36 AM
On your marks, get set


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 01, 2014, 02:59:01 AM
Deploying skeleton tool in T-360 minutes .
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 01, 2014, 03:22:23 AM
Hurry up guys, I started 15 hours ago.  :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 01, 2014, 03:49:55 AM
Mother earth is taking her sweet time.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 01, 2014, 04:19:53 AM
Tuff it`s going to be

I don't know about you guys but I am pretty excited to have Yoda in the SKTC.

Hurry up guys, I started 15 hours ago.  :D

Me tooish.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 01, 2014, 08:54:33 AM
So Can I go first, please?

Hello from Down-under,

I carried the Mighty MUT the whole day. I got a few "what tool is that?" from my fellow workers and a few "wow, that is quite big". (in a good sense only please  ;)). Sadly I could do nothing but assault a few pieces of fruit for lunch. The blade on this is fantastic. I don't like combo blades at all (all my PST II have PST blades), but have to admit the MUT blade is nice to use.

I'm also getting used to the weight on my belt. I carry a bunch of train keys on the right side of my hip which balances the weight of the MUT quite nicely. The leather pouch I made sits high on the belt - very comfortable.

Hopefully the rest of the week will bring a few tool challenges to put the MUT through its paces. It will be on lunch duty everyday.

More to come, no pics today.

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 01, 2014, 10:30:42 AM
I actually used mine today - to trim some stray threads on my pants pocket.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 01, 2014, 06:19:30 PM
Skele at Work
(http://tapatalk.imageshack.com/v2/14/12/01/06afadf9cf35976802c654a9d2656e5a.jpg)


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 01, 2014, 06:24:10 PM
Challenge started at 05.50 am with slicing a lemon to my standard cup of tea. My work starts at 06.00 am and today was that lemoncuttyng repeated 3x. After work had mut some action in our basement too, but picks will come maybe tomorrow. Too lazy to get them from camera  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 01, 2014, 06:43:13 PM
the challenge is off to a good start for me... my CX replaced a screw this morning while I was changing the battery in one of our smoke detectors. he's been sitting quietly in my pocket since then, but I'm sure he'll be back in action before the day is over. ;)

I did manage to give some of my other tools as much action as possible over the weekend. :D carried my ReCharge for most of the weekend, and he was definitely put to work while I was helping my dad move a bunch of furniture. (disassembling/reassembling of the furniture to get it through doorways, etc.) carried my new Surge + Style PS while putting up Christmas lights on the house, and switched to the ST300 + ZT 0566 while we were out getting our Christmas tree.

...and now they're all resting peacefully for the next month. :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 01, 2014, 07:49:49 PM
So far, the Skeletool is doing ok, sorta. Its day started at 3:30 am. So far, all was well. The driver worked great and cuts copper wire nicely. Everything running some with it til I walked into a major water break. For the most part, regular tools deal with this kind of work, but even then, I have to use a multi. One time I had to cut a hard wire that holds some ceiling tile up. I was up in a crawl space and figured, hey my multi can cut this and save my having to go out and back down a latter. No go. The Surge would have ate this wire brunch. The file and saw would have also been nice to have at the time but no biggie. Did dull the combo blade already. But ceiling tile is hard on a blade. Also, the length of the blade has a lot to do with this. Not very long. I do miss having the two blades. But all and all. The Skeletool did very well. Faired a lot better than my Vic Compact did.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 01, 2014, 08:22:30 PM
Lunch break, so far today we have done

Ceiling tiles
(http://tapatalk.imageshack.com/v2/14/12/01/4898b97f683791630f8c28bd5d126c54.jpg)

Screen repairs

(http://tapatalk.imageshack.com/v2/14/12/01/f16bf9517daf28f8cabec2f702436443.jpg)

Drywall Anchors

(http://tapatalk.imageshack.com/v2/14/12/01/c08de3183a2c2042f10fece4cf2685bb.jpg)

And makes a good door stop.

(http://tapatalk.imageshack.com/v2/14/12/01/622df186244ef49ae49c03c75a6a8b7f.jpg)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on December 01, 2014, 08:25:15 PM
Nice, a doorstop is a rather creative use Colt :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 01, 2014, 09:06:29 PM
Ahhhh. Let the games begin!!!


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: babola on December 01, 2014, 09:25:13 PM
Lunch break, so far today we have done

Ceiling tiles

Screen repairs

Drywall Anchors

And makes a good door stop.



So far you're in a lead...by a mile  8)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 01, 2014, 10:27:47 PM
Cool Colt! You where put some up, I was tearing a bunch of them down. LOL! Of coarse, mine where all soaked.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 01, 2014, 10:54:17 PM

Cool Colt! You where put some up, I was tearing a bunch of them down. LOL! Of coarse, mine where all soaked.

Same here, pipes sweating. Have to do some touch up on my blade tonight that's for sure.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 01, 2014, 10:55:28 PM
Nice work,  :tu: can not believe you guys actually use Skeletool for "real" work, stories about them I read were always just some quick fix stuff.
I am glad it is working out so far.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 01, 2014, 10:57:22 PM
What are my favor things to do on a Monday morning?
A nice cup of coffee and work on my  :multi: ,
I did have to use Powerduo's tweezers to move those tiny washers around....Skeletool's pliers are just too big for such task.

That is not breaking the rules, is it?

You got a multitool problem if you use one multitool to work on another multitool.
You got a multitool problem if you work on your multitool on a Monday morning instead of going to work like everyone else....
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on December 01, 2014, 11:02:15 PM
I love the looks of that skull on your Skele Kampfer :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 01, 2014, 11:07:57 PM
I love the looks of that skull on your Skele Kampfer :tu:
That is not the only reason it is there.

Anyone notice you could leave finger print on blade through the two larger holes on blade cover? The skull is there to prevent that.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 01, 2014, 11:09:20 PM
Colt, did you paint the pliers head?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on December 01, 2014, 11:10:34 PM
I love the looks of that skull on your Skele Kampfer :tu:
That is not the only reason it is there.

Anyone notice you could leave finger print on blade through the two larger holes on blade cover? The skull is there to prevent that.
I wouldn't notice since I don't have one, but clever on your part, and stylish ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 01, 2014, 11:12:09 PM

I love the looks of that skull on your Skele Kampfer :tu:
That is not the only reason it is there.

Anyone notice you could leave finger print on blade through the two larger holes on blade cover? The skull is there to prevent that.

That skull is wicked !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 01, 2014, 11:18:20 PM
Skeletool chilling after a blade touch up and long day of cutting, snipping wire, turning screws and be soaked all day. And guess what? No rust!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 02, 2014, 02:53:26 AM
Just played with it all day
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 02, 2014, 03:08:11 AM
Skeletool did ok on its first day of work.

Will post some details and pictures once this shoddy internet situation gets sorted.

Love checking out what the rest of you have been up to.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: geekdadrepair on December 02, 2014, 03:25:05 AM
I am jealous of all you guys. I work all week, and we're not allowed weapons or tools. So to feel like I used it. I came home after work and cut a bunch of paracord for my daughter. Lookout Monday though. It will see a lot of use catching up on my neglected honeydo's.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 02, 2014, 03:38:41 AM
I work all week, and we're not allowed weapons or tools.

How do you work all week without tools?  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 02, 2014, 04:16:16 AM
I just discovered an area in which this challenge will be a problem for me. :-\

I have a basketball game tonight, and since most of my larger LM tools weigh down my basketball shorts, I usually just clip my modded Style PS (Squirt knife blade instead of scissors) onto my keys and call it good. I've got a Blast in the car as a backup MT, but I don't usually need anything more than the Style PS at my basketball and/or soccer games.

I'll have to get used to tossing the Skeletool in my gym bag before I leave...

ok, so I guess it's more like a minor inconvenience. :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on December 02, 2014, 04:24:15 AM
Just mail duty tonight, opening a companion for the Skele for the next month...
(http://tapatalk.imageshack.com/v2/14/12/01/425d65f5d91549ac2ea3e27b78ac08bf.jpg)
Yep don't worry, just some bits.  I grabbed this set because I've been wanting the adapter to keep in a bag with my Rebar(after December).  And I don't need the full compliment of bits to ride with the Skele this month, so it made sense.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: geekdadrepair on December 02, 2014, 04:42:48 AM
Quote from: HarleyXJGuy

How do you work all week without tools?  :pok:
[/quote

Lol I work in a jail, no weapons or tools.

Sent from my SPH-L720T using Tapatalk

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: geekdadrepair on December 02, 2014, 04:58:52 AM
My wife needed help with some Christmas crafts.

Sent from my SPH-L720T using Tapatalk

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Higgins617 on December 02, 2014, 05:04:32 AM
Skeletool did ok on its first day of work.

Will post some details and pictures once this shoddy internet situation gets sorted.

Love checking out what the rest of you have been up to.

Would have been even better with an X-Tract right?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on December 02, 2014, 05:05:50 AM
Skeletool did ok on its first day of work.

Will post some details and pictures once this shoddy internet situation gets sorted.

Love checking out what the rest of you have been up to.

Would have been even better with an X-Tract right?

 :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 02, 2014, 05:09:04 AM
Skeletool did ok on its first day of work.

Will post some details and pictures once this shoddy internet situation gets sorted.

Love checking out what the rest of you have been up to.

Would have been even better with an X-Tract right?

 :whistle:

Alert! Alert!

We have infiltrators in the wire and they are armed. Armed with sub standard multi tools but armed non the less.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Higgins617 on December 02, 2014, 05:10:49 AM
Skeletool did ok on its first day of work.

Will post some details and pictures once this shoddy internet situation gets sorted.

Love checking out what the rest of you have been up to.

Would have been even better with an X-Tract right?

 :whistle:

Alert! Alert!

We have infiltrators in the wire and they are armed. Armed with sub standard multi tools but armed non the less.

Almost just spit coke all over my computer, good one!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 02, 2014, 06:45:25 AM
G'Day,

Day 2 with the MUT as EDC.

First up was lunch duties, similar to yesterday. The nectarines were no match for the Mighty MUT blade.

I received a Flair from a fellow inmate today. As with all the "preloved" tools, I took it apart to give it a thorough clean and lube. I did not realise that the cork back-spring was broken, apparently a common thing on the Flairs. I'm waiting for LM support to find out if they can possible fix it. I won't hold my breath thou. The MUT came in handy to get the gold cap lifter off. They are pretty tight on. I also received a "preloved" PST II that has been disassembled, cleaned and is simmering in some WD40. I might just build one hybrid tool out of both. I may also update my Lunch Box Tool I built a few months earlier. Once all the tools are clean I'll decide what to do. I did notice that the two pliers heads are different. The Flair is more shaped like the Sideclip. But I digress, this will be a thread in the Mod Section.

Some pics...

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 02, 2014, 07:23:57 AM
So the Battle Captain got a box of goodies in the mail and donated it to the Soldiers who work in the TOC.

Was filled with sausage and cheese. Sound like a job for the Skeletool!

Not so much. While the holes in the blade are neat they are also a nice place for meat and cheese to fill and be hard to get out. Blade is kinda short for the bigger peices too.

Still in the end the snacks we're cut and all was well so can't complain to much.  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 02, 2014, 07:27:04 AM
A sad little piece cake for my birthday, and I have to share it with my wife  :rant:

Do you think skeletool's blade is sharp enough to slice it?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 02, 2014, 07:29:53 AM
A sad little piece cake for my birthday, and I have to share it with my wife  :rant:

Do you think skeletool's blade is sharp enough to slice it?

Is it stuck?  :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 02, 2014, 07:31:25 AM
While the holes in the blade are neat they are also a nice place for meat and cheese to fill
That means you got an extra issue of meat n cheese, no complain.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 02, 2014, 07:32:05 AM
Happy Birthday Kampfer.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 02, 2014, 07:33:25 AM
Thank you friend, I would be happier if you spelled my name right. :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 02, 2014, 07:35:37 AM
Smurf, sorry about that mate.  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 02, 2014, 07:48:10 AM
 :2tu: no problem.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 02, 2014, 08:15:33 AM
While the holes in the blade are neat they are also a nice place for meat and cheese to fill
That means you got an extra issue of meat n cheese, no complain.

Good point, who doesn't want more meat?

Happy birtheday Kampfer! The big five Oh huh?  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 02, 2014, 09:17:35 AM
happy birthday, Kampfer! :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: captain spaulding on December 02, 2014, 09:21:43 AM
Happy Birthday!  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 02, 2014, 10:00:41 AM
Happy Birthday Kampfer!  :cheers:

Today I forgot to bring my usual knife to cut tomatoes for my lunch so the Skele came in handy again.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 02, 2014, 11:22:37 AM
Happy Birthday man!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on December 02, 2014, 02:52:14 PM
Happy birthday Kampfer :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: derekmac on December 02, 2014, 03:05:34 PM
Happy B-Day!!  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 02, 2014, 03:15:45 PM
Happy Birthday !


Sak's  rule !



Title: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 02, 2014, 03:18:46 PM
So we all know how uncomfortable the skeletool is when using the pliers. It is down right horrible. Here's a little help in the comfort zone.

(http://tapatalk.imageshack.com/v2/14/12/02/89f5a7d4d5fb127567360f49fffe2a04.jpg)

(http://tapatalk.imageshack.com/v2/14/12/02/87ea7fea6fa220783c6fcb3da0c3b623.jpg)


Sak's  rule !
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 02, 2014, 03:21:13 PM
So far today, no where near as choatic or as hard for the Skeletool. Just some light use.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 02, 2014, 03:23:41 PM
So we all know how uncomfortable the skeletool is when using the pliers. It is down right is horrible. Here's a little help in the comfort zone.

(http://tapatalk.imageshack.com/v2/14/12/02/89f5a7d4d5fb127567360f49fffe2a04.jpg)

(http://tapatalk.imageshack.com/v2/14/12/02/87ea7fea6fa220783c6fcb3da0c3b623.jpg)


Sak's  rule !
Good idea Colt! I will try that when I am horsing down on some wire.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 02, 2014, 04:51:11 PM
Going strong!! This is going to be a long month!


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 02, 2014, 04:58:35 PM

Going strong!! This is going to be a long month!


-AdmSlc

Indeed !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 02, 2014, 05:01:57 PM

Going strong!! This is going to be a long month!


-AdmSlc

Indeed !


Sak's  rule !

Is it almost over yet?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 02, 2014, 05:03:45 PM

Going strong!! This is going to be a long month!


-AdmSlc

Indeed !


Sak's  rule !
Yes. Yes it is. I have got to say, I really like the Skeletool. Good F&F, OH blade and all in a small package. I have been impressed so far.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 02, 2014, 05:04:11 PM
Of course I had to pick a MT with no features.. Just a blade and pliers.


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 02, 2014, 05:20:40 PM
Happy birthday, Kampfer!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 02, 2014, 05:28:54 PM
Happy birthday, Kampfer!

Forum welcome kmfdm.

Also where in the world (literally) is Estonia?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 02, 2014, 05:41:09 PM
Thank you men.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 02, 2014, 05:49:16 PM
Estonia is between Sweden, Finland, Russia and Lithuania. That means in somewhere in east-europe.   ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 02, 2014, 05:55:25 PM
Yesterdays basement action ... some screws, bending and sawing.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 02, 2014, 05:59:27 PM
Estonia is between Sweden, Finland, Russia and Lithuania.
That is an area most American are not familiar with.
Estonia is former state of USSR, right?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 02, 2014, 06:01:23 PM
So you have Tauntauns and Bumble the Abominable snow monster there?

I am betting you do.  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 02, 2014, 06:04:33 PM
Bending pic missed SRY  :twak: , But i need posts anyway so no repairing last message instead i make another and list another crappy pic taken today with cellphone in the darkness, where MUT takes a rest on a frozen tree.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 02, 2014, 06:06:28 PM
Estonia is between Sweden, Finland, Russia and Lithuania.
That is an area most American are not familiar with.
Estonia is former state of USSR, right?

You got it right!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 02, 2014, 06:07:37 PM
So you have Tauntauns and Bumble the Abominable snow monster there?

I am betting you do.  :pok:

Sry, dunno so much words in eng. Didnt understand thid  ???
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 02, 2014, 06:08:50 PM
So you have Tauntauns and Bumble the Abominable snow monster there?

I am betting you do.  :pok:

Sry, dunno so much words in eng. Didnt understand thid  ???
It is a joke, so just laugh. LOL.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 02, 2014, 06:09:59 PM
Estonia is between Sweden, Finland, Russia and Lithuania.
That is an area most American are not familiar with.
Estonia is former state of USSR, right?

You got it right!

I knew it!

Wait you was answering Kampfer.

Never mind.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 02, 2014, 06:11:41 PM
So you have Tauntauns and Bumble the Abominable snow monster there?

I am betting you do.  :pok:

Sry, dunno so much words in eng. Didnt understand thid  ???
It is a joke, so just laugh. LOL.

No it wasn't.  :whistle:

Oh and please say you have the movie Empire Strikes Back in Estonia?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 02, 2014, 06:20:34 PM

Oh and please say you have the movie Empire Strikes Back in Estonia?
[/quote]

1st time hear about this! Sounds interesting. To the topic.. i polished the lever from MUT today that is loosening the bit from driver  :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 02, 2014, 06:36:53 PM
Welcome kmfdm .


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 02, 2014, 08:23:56 PM
Day 2, lunch break.

Paint cans

(http://tapatalk.imageshack.com/v2/14/12/02/5fac6717cbcd7a345928aa82005ab54c.jpg)

Drywall

(http://tapatalk.imageshack.com/v2/14/12/02/457af0f1f40509311f2afb203d4d7f17.jpg)

TV mounts

(http://tapatalk.imageshack.com/v2/14/12/02/1478e4d7c0a29ec7adf6872470c30fa2.jpg)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 02, 2014, 11:10:55 PM
Milk tab puller
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 03:17:34 AM
I opened some paint cans yesterday but used the can opener bit instead of the bit driver umm bit. Was a little nervous about the strength of it, the bit driver I mean. The cans were older and had been sitting out for a while.

No issues with your paint opening Colt?
Title: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 03, 2014, 03:33:19 AM
I opened some paint cans yesterday but used the can opener bit instead of the bit driver umm bit. Was a little nervous about the strength of it, the bit driver I mean. The cans were older and had been sitting out for a while.

No issues with your paint opening Colt?

Negative. Works like a charm. What I find lacking Is a saw.

Sak's  rule !
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 03, 2014, 04:00:05 AM
Milk tab puller
Be careful don't put too much stress on that, you are abuseing the tool.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 03, 2014, 09:23:15 AM
G'Day,

Day 3 with the MUT. Sadly no real challenges today. I had a good Caramel and Coconut muffin, and the MUT cut that pretty easily.

I hope the weekend will bring some more opportunities to use the tool. On a plus side, I'm getting used to the weight and the size. I think by the end of December, it will be nearly not noticeable. I may just challenge January by EDC-ing a Surge  8)

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 03, 2014, 09:36:25 AM
pretty light duty for my Skele today. opened some mail when I got home from work, and opened a couple beers after my soccer game tonight. :D

:cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 09:51:33 AM
pretty light duty for my Skele today. opened some mail when I got home from work, and opened a couple beers after my soccer game tonight. :D

:cheers:

Hmm beer.  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: babola on December 03, 2014, 10:28:03 AM
Milk tab puller

Hmm...finger not god for that?  :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 03, 2014, 10:46:01 AM
Milk tab puller

Hmm...finger not god for that?  :think:

(http://assets.diylol.com/hfs/424/775/cf4/resized/fry-can-t-tell-meme-generator-can-t-tell-if-typo-of-purposely-mistyping-2b8b55.jpg)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 03, 2014, 11:09:00 AM
 :rofl:

Opened a package today....
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 03, 2014, 11:23:29 AM
:rofl:

Opened a package today....

Nice!  :tu:  I'll have to check it out when we catch up.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 11:27:36 AM
:rofl:

Opened a package today....

Nice!  :tu:  I'll have to check it out when we catch up.

Olight I3 is good kit.

You New Zealand guys can use em to find sheep and keep from falling down wells.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: babola on December 03, 2014, 11:35:21 AM
Milk tab puller

Hmm...finger not god for that?  :think:



(http://assets.diylol.com/hfs/424/775/cf4/resized/fry-can-t-tell-meme-generator-can-t-tell-if-typo-of-purposely-mistyping-2b8b55.jpg)

...and that's the beauty of it, isn't it?  8)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 03, 2014, 11:35:46 AM
:rofl:

Opened a package today....

Nice!  :tu:  I'll have to check it out when we catch up.

Olight I3 is good kit.

You New Zealand guys can use em to find sheep and keep from falling down wells.
Headtorches are better for that so we have both hands free.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 11:36:49 AM
That is why you get the Fenix universal head mount for your Olight.

More fun for you and your umm partner.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 03, 2014, 11:39:45 AM
That is why you get the Fenix universal head mount for your Olight.

More fun for you and your umm partner.

You're about to go NLC.  :ahhh  :ahhh  :ahhh
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 03, 2014, 11:40:45 AM
If you move the clip to the other position and turn it around you can clip it to a cap.

I tend not to wear caps, especially at night. Something to do with the sun not being around...
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: hiraethus on December 03, 2014, 11:43:48 AM
That is why you get the Fenix universal head mount for your Olight.

More fun for you and your umm partner.

You're about to go NLC.  :ahhh  :ahhh  :ahhh

Let's hope he ups his game a bit, eh?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 12:04:32 PM
That is why you get the Fenix universal head mount for your Olight.

More fun for you and your umm partner.

You're about to go NLC.  :ahhh  :ahhh  :ahhh

Let's hope he ups his game a bit, eh?

NLC?  :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 03, 2014, 12:12:16 PM
That is why you get the Fenix universal head mount for your Olight.

More fun for you and your umm partner.

You're about to go NLC.  :ahhh  :ahhh  :ahhh

Let's hope he ups his game a bit, eh?

NLC?  :think:

Yeah the No Life Club. Congrats brother.  :cheers:

Sent from the land of the long white cloud.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 03, 2014, 12:27:27 PM
That is why you get the Fenix universal head mount for your Olight.

More fun for you and your umm partner.

You're about to go NLC.  :ahhh  :ahhh  :ahhh

Let's hope he ups his game a bit, eh?

NLC?  :think:

Yeah the No Life Club. Congrats brother.  :cheers:

Sent from the land of the long white cloud.
Congrats Harley!!!
Zoid! Get the chicken! I got the lard.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 03, 2014, 12:29:30 PM
I opened some paint cans yesterday but used the can opener bit instead of the bit driver umm bit. Was a little nervous about the strength of it, the bit driver I mean. The cans were older and had been sitting out for a while.

No issues with your paint opening Colt?

Negative. Works like a charm. What I find lacking Is a saw.

Sak's  rule !
Yes, a saw and a can opener.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 01:06:59 PM
That is why you get the Fenix universal head mount for your Olight.

More fun for you and your umm partner.

You're about to go NLC.  :ahhh  :ahhh  :ahhh

Let's hope he ups his game a bit, eh?

NLC?  :think:

Yeah the No Life Club. Congrats brother.  :cheers:

Sent from the land of the long white cloud.
Congrats Harley!!!
Zoid! Get the chicken! I got the lard.

Didn't even notice. NLC and still no SAK.  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 03, 2014, 01:47:05 PM

That is why you get the Fenix universal head mount for your Olight.

More fun for you and your umm partner.

You're about to go NLC.  :ahhh  :ahhh  :ahhh

Let's hope he ups his game a bit, eh?

NLC?  :think:

Yeah the No Life Club. Congrats brother.  :cheers:

Sent from the land of the long white cloud.
Congrats Harley!!!
Zoid! Get the chicken! I got the lard.

Didn't even notice. NLC and still no SAK.  :facepalm:

Fail ! :)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 03, 2014, 01:48:43 PM

I opened some paint cans yesterday but used the can opener bit instead of the bit driver umm bit. Was a little nervous about the strength of it, the bit driver I mean. The cans were older and had been sitting out for a while.

No issues with your paint opening Colt?

Negative. Works like a charm. What I find lacking Is a saw.

Sak's  rule !
Yes, a saw and a can opener.

And Scissors !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 03:02:48 PM

That is why you get the Fenix universal head mount for your Olight.

More fun for you and your umm partner.

You're about to go NLC.  :ahhh  :ahhh  :ahhh

Let's hope he ups his game a bit, eh?

NLC?  :think:

Yeah the No Life Club. Congrats brother.  :cheers:

Sent from the land of the long white cloud.
Congrats Harley!!!
Zoid! Get the chicken! I got the lard.

Didn't even notice. NLC and still no SAK.  :facepalm:

Fail ! :)


Sak's  rule !

Sigh.

Oh wait this is the LM forum. I got three of them so I am good to go.

Will even throw up a picture of Skelly talking smack about not having to sit in the drawer all month.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1112141716.jpg~original)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 03, 2014, 03:13:36 PM


That is why you get the Fenix universal head mount for your Olight.

More fun for you and your umm partner.

You're about to go NLC.  :ahhh  :ahhh  :ahhh

Let's hope he ups his game a bit, eh?

NLC?  :think:

Yeah the No Life Club. Congrats brother.  :cheers:

Sent from the land of the long white cloud.
Congrats Harley!!!
Zoid! Get the chicken! I got the lard.

Didn't even notice. NLC and still no SAK.  :facepalm:

Fail ! :)


Sak's  rule !

Sigh.

Oh wait this is the LM forum. I got three of them so I am good to go.

Will even throw up a picture of Skelly talking smack about not having to sit in the drawer all month.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1112141716.jpg~original)

Nice, great spyderco collection


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 03, 2014, 05:44:42 PM
You post average 20 each day, is that a record?
Show content
spammer.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 05:47:20 PM
You post average 20 each day, is that a record?
Show content
spammer.

I would have thought it was more if you are talking about me?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 03, 2014, 06:10:43 PM
G'Day,

Day 3 with the MUT. Sadly no real challenges today. I had a good Caramel and Coconut muffin, and the MUT cut that pretty easily.

I hope the weekend will bring some more opportunities to use the tool. On a plus side, I'm getting used to the weight and the size. I think by the end of December, it will be nearly not noticeable. I may just challenge January by EDC-ing a Surge  8)

Cheers,

Pete
I could not lift up a Surge anymore after I got use to Skeletool. :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 06:12:21 PM
G'Day,

Day 3 with the MUT. Sadly no real challenges today. I had a good Caramel and Coconut muffin, and the MUT cut that pretty easily.

I hope the weekend will bring some more opportunities to use the tool. On a plus side, I'm getting used to the weight and the size. I think by the end of December, it will be nearly not noticeable. I may just challenge January by EDC-ing a Surge  8)

Cheers,

Pete
I could not lift up a Surge anymore after I got use to Skeletool. :facepalm:

Dibs!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 03, 2014, 06:14:35 PM
G'Day,

Day 3 with the MUT. Sadly no real challenges today. I had a good Caramel and Coconut muffin, and the MUT cut that pretty easily.

I hope the weekend will bring some more opportunities to use the tool. On a plus side, I'm getting used to the weight and the size. I think by the end of December, it will be nearly not noticeable. I may just challenge January by EDC-ing a Surge  8)

Cheers,

Pete
I could not lift up a Surge anymore after I got use to Skeletool. :facepalm:

Dibs!
I still can raid the German trenches with a DP-28... :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 06:19:35 PM
G'Day,

Day 3 with the MUT. Sadly no real challenges today. I had a good Caramel and Coconut muffin, and the MUT cut that pretty easily.

I hope the weekend will bring some more opportunities to use the tool. On a plus side, I'm getting used to the weight and the size. I think by the end of December, it will be nearly not noticeable. I may just challenge January by EDC-ing a Surge  8)

Cheers,

Pete
I could not lift up a Surge anymore after I got use to Skeletool. :facepalm:

Dibs!
I still can raid the German trenches with a DP-28... :whistle:

Well maybe if you had a DP-28 and a time machine!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 03, 2014, 06:21:25 PM
G'Day,

Day 3 with the MUT. Sadly no real challenges today. I had a good Caramel and Coconut muffin, and the MUT cut that pretty easily.

I hope the weekend will bring some more opportunities to use the tool. On a plus side, I'm getting used to the weight and the size. I think by the end of December, it will be nearly not noticeable. I may just challenge January by EDC-ing a Surge  8)

Cheers,

Pete
I could not lift up a Surge anymore after I got use to Skeletool. :facepalm:

Dibs!
I still can raid the German trenches with a DP-28... :whistle:

Well maybe if you had a DP-28 and a time machine!
I do on both accounts. https://scontent-2.2914.fna.fbcdn.net/hphotos-xaf1/v/t1.0-9/29976_1126836547872_254990_n.jpg?oh=d1dbd8d9b6b10853f7aae8aef873e1a4&oe=5503F804
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 06:23:43 PM
Not falling for you link Sir!

Prolly some kind of Rikroll situation or a New Zealand farm animal prank and I for one am not falling for it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 03, 2014, 06:24:35 PM
Not falling for you link Sir!

Prolly some kind of Rikroll situation or a New Zealand farm animal prank and I for one am not falling for it.
Come on! You know you want to. >:D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 03, 2014, 06:27:36 PM
Not falling for you link Sir!

Prolly some kind of Rikroll situation or a New Zealand farm animal prank and I for one am not falling for it.
Come on! You know you want to. >:D

No Sir. I spend all day with the New Zealand night crew and if I see one more shorn sheep or featherless chicken I may be sick.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 03, 2014, 06:53:24 PM
 :b2t: Opened some snack packs this morning, easy job for Skulle
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 03, 2014, 06:59:31 PM
Today I used the skeletool for sharpening a pencil, unscrewed a wood screw, used the knife to drill a new pilot hole and screwed the woodscrew into the new hole. It performed better at this than expected. :tu:
I also used the blade to cut wood shavings for the fireplace, wich I do every evening so that its easy to light the fire in the morning. The edge retention of the PE blade i put on it is not great. So I have to sharpen it every night. On the bright side I get to improve my sharpening skills. :)


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 03, 2014, 07:47:45 PM

Today I used the skeletool for sharpening a pencil, unscrewed a wood screw, used the knife to drill a new pilot hole and screwed the woodscrew into the new hole. It performed better at this than expected. :tu:
I also used the blade to cut wood shavings for the fireplace, wich I do every evening so that its easy to light the fire in the morning. The edge retention of the PE blade i put on it is not great. So I have to sharpen it every night. On the bright side I get to improve my sharpening skills. :)


Sent from a device made from star dust using tapatalk

Nice !



Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 03, 2014, 07:48:40 PM
Boring day, prepping rails for paint.

(http://tapatalk.imageshack.com/v2/14/12/03/3d86f35b04c58d508645685e08319d55.jpg)

(http://tapatalk.imageshack.com/v2/14/12/03/53dce145b43327430c16109d51ceb6b5.jpg)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 03, 2014, 10:12:47 PM
Same here. Slow day for the Skeletool.
Just wire a new plug for a pigtail.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 04, 2014, 02:27:36 AM
I made a hole in my coffee so I could consume it faster  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 04, 2014, 02:30:05 AM
I did this
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 04, 2014, 02:30:52 AM
I made a hole in my coffee so I could consume it faster  :facepalm:
Sounds good to me.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 04, 2014, 03:14:00 AM
:b2t: Opened some snack packs this morning, easy job for Skulle

On topic?!

Well I am out then.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 04, 2014, 04:11:46 AM
Sending a pioneer to a galaxy far far away, Skulle helped cut the packing tape, it did ok but it was messy. This should be done by scissors if possible.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 04, 2014, 04:18:19 AM
Also helped capturing  escaped meat ball.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 04, 2014, 04:29:56 AM

Also helped capturing  escaped meat ball.

Cloudy with a chance of meatballs .


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 04, 2014, 04:31:35 AM
Sending a pioneer to a galaxy far far away, Skulle helped cut the packing tape, it did ok but it was messy. This should be done by scissors if possible.

Maybe a sharpness rather then choice of tool issue?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 04, 2014, 04:38:25 AM
You post average 20 each day, is that a record?
Show content
spammer.
He's done over 50 today so far...
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 04, 2014, 04:44:21 AM
You post average 20 each day, is that a record?
Show content
spammer.
He's done over 50 today so far...

Today or today when Kam posted his post?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 04, 2014, 04:58:33 AM
You post average 20 each day, is that a record?
Show content
spammer.
He's done over 50 today so far...
Clearly, army life is overrated.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 04, 2014, 05:06:27 AM
You post average 20 each day, is that a record?
Show content
spammer.
He's done over 50 today so far...
Clearly, army life is overrated.

So true.

So far this morning my boss used the Skelly to dig out some Q tip remnants from the inside of his M-4 trigger mechanism. Got stuck up in there while cleaning I guess.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 04, 2014, 06:46:24 AM
You post average 20 each day, is that a record?
Show content
spammer.
He's done over 50 today so far...

Today or today when Kam posted his post?
The real today, not behind the times today.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 04, 2014, 06:51:11 AM
You post average 20 each day, is that a record?
Show content
spammer.
He's done over 50 today so far...

Today or today when Kam posted his post?
The real today, not behind the times today.

Your counter must be broken I just woke up a few hours ago.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 04, 2014, 06:57:10 AM
Ahh so you do sleep!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 04, 2014, 07:14:50 AM
Ahh so you do sleep!

Even Ninja's sleep fool.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 04, 2014, 09:10:17 AM
G'Day,

Day 3 with the MUT. Sadly no real challenges today. I had a good Caramel and Coconut muffin, and the MUT cut that pretty easily.

I hope the weekend will bring some more opportunities to use the tool. On a plus side, I'm getting used to the weight and the size. I think by the end of December, it will be nearly not noticeable. I may just challenge January by EDC-ing a Surge  8)

Cheers,

Pete
I could not lift up a Surge anymore after I got use to Skeletool. :facepalm:

He He He Sure you can.

I can only carry these big tools if I have a belt on. I tried yesterday with the MUT in my elasticized shorts and did not get to far before they were getting dragged down to my knees...  :facepalm: Not to good in public though.

What I found is with a slim pouch with only the tool, the heavier tools becomes manageable. Sure they are heavy, but if they don't move around on your belt I hardly notice it.

Day 4 had no challenges except lunch. The MUT got a few new admirers today whilst having lunch. It is not a common tool here in Oz, mainly due to price and its specialty. I do like it.

I have a few days off from Friday and are planning a motorcycle trip on Monday. No doubt I'll have a few good pictures of the tool outside next to the bikes.

This challenge is getting interesting. I am enjoying the feedback from everybody. Good one Kampfer  :salute:

Enjoy the day

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 04, 2014, 09:24:39 AM
How we carry out MT are our personal preference, I am not a fan of sheath carry, I like clip on my MT so I can pocket carry them, even for heavy MT like Surge. I found it more comfortable this way. Again, I wear jeans 90% of the time so that is a factor too.

Glad to have you with us, Pete.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 04, 2014, 09:31:30 AM
How we carry out MT are our personal preference, I am not a fan of sheath carry, I like clip on my MT so I can pocket carry them, even for heavy MT like Surge. I found it more comfortable this way. Again, I wear jeans 90% of the time so that is a factor too.

Glad to have you with us, Pete.

What kind of work do you do Kampfer?

I am very curious to try pocket clip carry with my Wave once this is over. One of the Soldiers left his Wave behind in the TOC today and I was shocked about how heavy it felt when I picked it up after carrying the Skele the last week or so.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 04, 2014, 09:37:40 AM
I own a fire alarm engineering firm, that means I am a desk jockey who needs nothing but phone, keyboard & mouse, and wifi.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 04, 2014, 09:44:02 AM
How we carry out MT are our personal preference, I am not a fan of sheath carry, I like clip on my MT so I can pocket carry them, even for heavy MT like Surge. I found it more comfortable this way. Again, I wear jeans 90% of the time so that is a factor too.

Glad to have you with us, Pete.

I agree that a carry method is personal, if I wear jeans I also use a clipped tool. Jeans are more sturdy and their pockets, I find, are excellent for pocket carry.

I'm a train driver and unfortunately cannot wear jeans to work. We are given a uniform that has to comply with all sorts of standards, hence a belt / sheath carry.

>>Glad to have you with us, Pete. Thanks mate  :salute:

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 04, 2014, 09:47:05 AM

I'm a train driver


How does one drives a train?

Maybe call yourself a train rider or train gas pedal pusher?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 04, 2014, 10:09:06 AM
Also have to do with the role we have.
I think it is perfectly fine for a professional in uniform wearing belt and sheath while a office worker wearing a big sheath on his belt is a bit..  ???

My brother is a handyman who wears uniform 24/7 and he has three sheaths on his belt, phone, flash light and MT. He likes the way he looks.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 04, 2014, 10:13:29 AM

I'm a train driver


How does one drives a train?

Maybe call yourself a train rider or train gas pedal pusher?

 :D semantics, I agree. My "license" says I'm a driver. No steering, however, you still have to apply power or brakes. I think a train picture of the MUT may come this way...

No gas on mine, I drive / operate electric passenger trains. Eight cars +- 600 metric tons. I live every little boys dream: ride a motorbike and drive a train every day.  ;)

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 04, 2014, 10:17:00 AM
Also have to do with the role we have.
I think it is perfectly fine for a train crew in uniform wearing belt and sheath while a office worker wearing a big sheath on his belt is a bit..  ???


Absolutely spot-on. Being in uniform allows me to wear the multi on my person in sight. The laws are pretty strict here in Oz, and will not allow you to wear on just for the sake of wearing it. I ofter chat to the cops on the platforms and exchange multi's for a good look and feel. I have never had any trouble from them.

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 04, 2014, 03:16:24 PM
My normal carry is , sheath carry a MT and pocket a Sak with a dangler. I don't really like a Sak bottomed out in a front pocket. Oddly enough I am pocket carrying the skele, the bits and driver are in a sheath for challenge.


Sak's  rule !



Title: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 04, 2014, 03:17:55 PM
How many days left ? :(

Touch up time.

(http://tapatalk.imageshack.com/v2/14/12/04/76784e33d268e3628c684fc71bdcbfc4.jpg)

Sak's  rule !
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 04, 2014, 03:19:55 PM
How many days left ?


Sak's  rule !
Too many.....
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 04, 2014, 03:28:11 PM

How many days left ?


Sak's  rule !
Too many.....


Man I picked up a ST300 and PPP  and I can't wait to take them out and play. That guy still has that surge, he's down to 75.00 AND ITS A BO. going this weekend with 70 hopefully he will go for it.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 04, 2014, 03:41:31 PM
Lumping the MUT into the same class with the Skeletool is stretching it a bit.
Dont you think?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 04, 2014, 03:49:39 PM

How many days left ?


Sak's  rule !
Too many.....


Man I picked up a ST300 and PPP  and I can't wait to take them out and play. That guy still has that surge, he's down to 75.00 AND ITS A BO. going this weekend with 70 hopefully he will go for it.


Sak's  rule !
Best of luck! I hope you get it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 04, 2014, 04:11:36 PM
Nothing interesting today. MUT cut his regular lemon slices and some ducktape. Lunchtime some meat and carrots too. Yesterday was almost same deal. In wintertime here are not so much going on or doing something. It is dark and cold all day long. More hanging with books and internet.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 04, 2014, 05:45:32 PM
Lumping the MUT into the same class with the Skeletool is stretching it a bit.
Dont you think?
I agree, not the same class, but the same family.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 04, 2014, 06:48:47 PM
I actually had to screw inn a screw in the wall today too, but this time with pics!
Using blade as awl:
(http://tapatalk.imageshack.com/v2/14/12/04/e51841010fc3b6beed6f1fb6fc2a3fcb.jpg)
Screwing inn screw:
(http://tapatalk.imageshack.com/v2/14/12/04/a576ed5c98af6ecf95c106058734a5f0.jpg)

One advantage the Skeletool has over other MT's for this, is the bit driver on the end that can not fold over your fingers when you tork down on a screw like this.

I also cut down a branch of wood with it. I used too much firce on it though, because the liner popped so far out I had trouble getting it back in and closing the blade. This might be because of the after market blade though.


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 04, 2014, 06:51:38 PM
Dwarfs surprised today with hygiene stuff to my boys  :cheers:. Toothbrush to MUT (and all others from next month) and soap to Crunch to the future.To next year mr. Rust has surely taken a crunch from Crunch and he need some care then  :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 04, 2014, 07:37:25 PM
Grathr, doesn't seen like your aftermarket blade is performing any better than the stock 420hc blade, maybe switching back?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 04, 2014, 07:39:03 PM
Dwarfs surprised today with hygiene stuff to my boys .Toothbrush to MUT
I think you misspelled, it is toolbrush . ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: av8r1 on December 04, 2014, 07:59:12 PM
I've been carrying one every day for four years now.  What do I win?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 04, 2014, 08:10:19 PM

Grathr, doesn't seen like your aftermarket blade is performing any better than the stock 420hc blade, maybe switching back?

I might do that later.


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 04, 2014, 10:30:38 PM
Trampoline take down today
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 04, 2014, 10:36:35 PM
 :multi:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 04, 2014, 10:50:27 PM
Skulle helped replacing wire cutter on my Brother's ST300.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 04, 2014, 11:17:42 PM
So far so good. However I must say I honestly hate the tip down only pocket clip on my Leatherman. Constantly feels like it is going to fall out of my pocket. I am having a pretty hard time not having screwdrivers on me either. All I have is a blade and pliers. I feel naked.


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 04, 2014, 11:27:41 PM
So far so good. However I must say I honestly hate the tip down only pocket clip on my Leatherman. Constantly feels like it is going to fall out of my pocket. I am having a pretty hard time not having screwdrivers on me either. All I have is a blade and pliers. I feel naked.


-AdmSlc
Why didn't you go with a Skeletool instead?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 05, 2014, 12:38:04 AM
Light day, some package opening, bunk bed ladder repairs, strung fishing line across a ceiling for Christmas decorations.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 05, 2014, 12:58:33 AM
I've been carrying one every day for four years now.  What do I win?
What do you think of it?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: av8r1 on December 05, 2014, 02:26:21 AM
I love it.  It replaced a tactical folder, and what a replacement.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: geekdadrepair on December 05, 2014, 03:00:33 AM
Mine just sat here being sad. Look at it all depressed while I work 12 hours. I came home and had to make a robot for my son's school, so I abused the blade on some tinfoil.

Sent from my SPH-L720T using Tapatalk

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 05, 2014, 03:02:56 AM
My normal carry is , sheath carry a MT and pocket a Sak with a dangler. I don't really like a Sak bottomed out in a front pocket. Oddly enough I am pocket carrying the skele, the bits and driver are in a sheath for challenge.


Not using you Skellys clip?

I have been and it is just like carrying my Spyderco Military, pretty much the same weight and feel.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 05, 2014, 03:05:20 AM

How many days left ?


Sak's  rule !
Too many.....


Man I picked up a ST300 and PPP  and I can't wait to take them out and play. That guy still has that surge, he's down to 75.00 AND ITS A BO. going this weekend with 70 hopefully he will go for it.


$70.00 BO Surge.

Yeah I am going to need some alone time and a new pair of drawers.  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 05, 2014, 03:10:08 AM
I've been carrying one every day for four years now.  What do I win?

My sympathy?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 05, 2014, 03:16:57 AM
Constantly feels like it is going to fall out of my pocket.


Been having a issue with my Skelly like this.

While I wear it through the day the Skelly does not move from its spot.

At least four times since I started carrying a pocket Skeletool it has fallen out of my pants pocket. It has always been while the pants are off though and I am picking them up off the floor or bed.

Not super worried about it since, like I said so fo so good while wearing it about. Still considering doing something to make it a little bit tighter.

Do enjoy how easy it is to get in and out of the pocket though. Some of my Spyderco's are bad about this.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 05, 2014, 03:22:44 AM
I've been carrying one every day for four years now.  What do I win?

My sympathy?
The satisfaction of knowing you obviously have a dependable MT?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 05, 2014, 03:24:45 AM
I've been carrying one every day for four years now.  What do I win?

My sympathy?
The satisfaction of knowing you obviously have a dependable MT?

I am going to stick with my first answer.

But thanks for playing JBW1.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 05, 2014, 03:27:15 AM
  :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 05, 2014, 05:07:17 AM
Constantly feels like it is going to fall out of my pocket.


Been having a issue with my Skelly like this.

While I wear it through the day the Skelly does not move from its spot.

At least four times since I started carrying a pocket Skeletool it has fallen out of my pants pocket. It has always been while the pants are off though and I am picking them up off the floor or bed.

Not super worried about it since, like I said so fo so good while wearing it about. Still considering doing something to make it a little bit tighter.

Do enjoy how easy it is to get in and out of the pocket though. Some of my Spyderco's are bad about this.
Keep your pants ON, soldier!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 05, 2014, 05:15:58 AM
Constantly feels like it is going to fall out of my pocket.


Been having a issue with my Skelly like this.

While I wear it through the day the Skelly does not move from its spot.

At least four times since I started carrying a pocket Skeletool it has fallen out of my pants pocket. It has always been while the pants are off though and I am picking them up off the floor or bed.

Not super worried about it since, like I said so fo so good while wearing it about. Still considering doing something to make it a little bit tighter.

Do enjoy how easy it is to get in and out of the pocket though. Some of my Spyderco's are bad about this.
Keep your pants ON, soldier!

Got to do something to pass the time over here.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 05, 2014, 08:21:03 AM
G'Day,

Another good day for the MUT. Light duties before some good use over the weekend. Mostly food duties today, with some good processed chilly sausage.  :drool:

For HarleyXJGuy, I include a pic of the train Master Controller and train keys. I apologize for the poor quality mobile phone pictures.

Enjoy the weekend

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 05, 2014, 08:23:57 AM
Lumping the MUT into the same class with the Skeletool is stretching it a bit.
Dont you think?

Hallo Shark,

Not at all, he with the biggest tool wins...

I like the "woes ouk", sometime you just cannot translate good afrikaans sayings.

Cheers

Piet
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 05, 2014, 08:55:35 AM
G'Day,

Another good day for the MUT. Light duties before some good use over the weekend. Mostly food duties today, with some good processed chilly sausage.  :drool:

For HarleyXJGuy, I include a pic of the train Master Controller and train keys. I apologize for the poor quality mobile phone pictures.

Enjoy the weekend

Pete

Where is the steering wheel?  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 05, 2014, 09:05:19 AM
I love it.  It replaced a tactical folder, and what a replacement.
Why Arent you part of this challenge?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 05, 2014, 09:07:09 AM
Constantly feels like it is going to fall out of my pocket.


Been having a issue with my Skelly like this.

While I wear it through the day the Skelly does not move from its spot.

At least four times since I started carrying a pocket Skeletool it has fallen out of my pants pocket. It has always been while the pants are off though and I am picking them up off the floor or bed.

Not super worried about it since, like I said so fo so good while wearing it about. Still considering doing something to make it a little bit tighter.

Do enjoy how easy it is to get in and out of the pocket though. Some of my Spyderco's are bad about this.
I know what you mean but this could happen with any folders.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 05, 2014, 09:09:31 AM
Use 3/16 driver bit to clean under finger nails, worked well,  normally I would use Micra for this. :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 05, 2014, 09:58:13 AM
Constantly feels like it is going to fall out of my pocket.


Been having a issue with my Skelly like this.

While I wear it through the day the Skelly does not move from its spot.

At least four times since I started carrying a pocket Skeletool it has fallen out of my pants pocket. It has always been while the pants are off though and I am picking them up off the floor or bed.

Not super worried about it since, like I said so fo so good while wearing it about. Still considering doing something to make it a little bit tighter.

Do enjoy how easy it is to get in and out of the pocket though. Some of my Spyderco's are bad about this.
I know what you mean but this could happen with any folders.

For sure.

Just enjoying how easy it is to clip to my pocket and it has not moved except when my pants are off.

If it becomes an issue I will tighten it up some.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 05, 2014, 10:22:18 AM
Where is the steering wheel?  :pok:

I haven't unpacked it yet.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 05, 2014, 11:26:05 AM
Pieter From No Church would be the most probable.
A MUT will make me look fat and I sold my AR15.


I am new to Skelly world and already having buyers remorse, should I get the CX and give this one to a friend?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 05, 2014, 12:08:58 PM

I am new to Skelly world and already having buyers remorse, should I get the CX and give this one to a friend?

What is it about the Skelly that is making you not like it?

I have the regular Skelly also and do not feel the need to "upgrade" although I am pretty sure I want to score a PE 154 CM blade for it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 05, 2014, 02:38:25 PM
;D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 05, 2014, 02:56:30 PM
;D


 :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:


 :tu: :tu: :tu: :tu: :tu: :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 05, 2014, 03:00:07 PM

;D


 :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:


 :tu: :tu: :tu: :tu: :tu: :tu:

:rofl: :tu:


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 05, 2014, 03:03:13 PM
LOL! Think Kampfer will like that?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 05, 2014, 03:04:54 PM
Hmmm. How do I get myshroms in my soup, with a MT with no can opener? :think:
(http://tapatalk.imageshack.com/v2/14/12/05/14d69240b6b586d3f4640bb0ff63119a.jpg)

Use the smal flat driver bit and a meat mallet :)
(http://tapatalk.imageshack.com/v2/14/12/05/b42ab0833efbd5fc9117ba2c0c698621.jpg)
I used the mallet to gently tap the plier head, driving the bit into the can,  wich worked surprisingly well. :tu:


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 05, 2014, 03:10:48 PM


;D


 :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:


 :tu: :tu: :tu: :tu: :tu: :tu:

:rofl: :tu:


Sent from a device made from star dust using tapatalk

Perfect !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 05, 2014, 03:11:57 PM

Hmmm. How do I get myshroms in my soup, with a MT with no can opener? :think:
(http://tapatalk.imageshack.com/v2/14/12/05/14d69240b6b586d3f4640bb0ff63119a.jpg)

Use the smal flat driver bit and a meat mallet :)
(http://tapatalk.imageshack.com/v2/14/12/05/b42ab0833efbd5fc9117ba2c0c698621.jpg)
I used the mallet to gently tap the plier head, driving the bit into the can,  wich worked surprisingly well. :tu:


Sent from a device made from star dust using tapatalk

Right on !  Very ingenious.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 05, 2014, 03:26:33 PM
(http://tapatalk.imageshack.com/v2/14/12/05/eec8eba62ccdf3437e5d6633c1832da4.jpg)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 05, 2014, 07:27:36 PM
Hmmm. How do I get myshroms in my soup, with a MT with no can opener? :think:
(http://tapatalk.imageshack.com/v2/14/12/05/14d69240b6b586d3f4640bb0ff63119a.jpg)

Use the smal flat driver bit and a meat mallet :)
(http://tapatalk.imageshack.com/v2/14/12/05/b42ab0833efbd5fc9117ba2c0c698621.jpg)
I used the mallet to gently tap the plier head, driving the bit into the can,  wich worked surprisingly well. :tu:

nice work, Grathr -- love this solution! :tu:

I wonder if a similar method could be implemented to use the back side of the carabiner to open a can... :think: I remember seeing it done in a video review of the Style CS, but the metal on the Skeletool might be too thick...
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 05, 2014, 08:28:47 PM

Hmmm. How do I get myshroms in my soup, with a MT with no can opener? :think:
(http://tapatalk.imageshack.com/v2/14/12/05/14d69240b6b586d3f4640bb0ff63119a.jpg)

Use the smal flat driver bit and a meat mallet :)
(http://tapatalk.imageshack.com/v2/14/12/05/b42ab0833efbd5fc9117ba2c0c698621.jpg)
I used the mallet to gently tap the plier head, driving the bit into the can,  wich worked surprisingly well. :tu:

nice work, Grathr -- love this solution! :tu:

I wonder if a similar method could be implemented to use the back side of the carabiner to open a can... :think: I remember seeing it done in a video review of the Style CS, but the metal on the Skeletool might be too thick...

I think that actually might work. Ill have to try that the next time.


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 05, 2014, 08:46:57 PM

nice work, Grathr -- love this solution! :tu:

I wonder if a similar method could be implemented to use the back side of the carabiner to open a can... :think: I remember seeing it done in a video review of the Style CS, but the metal on the Skeletool might be too thick...

I think that actually might work. Ill have to try that the next time.

that's good, because my forum-fu has failed me and I can't find the video I was talking about. :facepalm:

I'll give it a try as well, if I can find any cans that don't have a pull-tab attached!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 05, 2014, 09:58:22 PM
The few days with the Skeletool showed me that this is perfect for my requirements and I gave the normal version to a good friend tonight.
Also called "my dealer" and will be picking up a skeletool cx and bit kit tomorrow morning.

Better blade now makes sense for long term use.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 05, 2014, 10:07:00 PM
LOL! Think Kampfer will like that?
I love it!  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 05, 2014, 11:08:08 PM
Sweet! Glad you like it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 05, 2014, 11:08:26 PM

I am new to Skelly world and already having buyers remorse, should I get the CX and give this one to a friend?

What is it about the Skelly that is making you not like it?

I have the regular Skelly also and do not feel the need to "upgrade" although I am pretty sure I want to score a PE 154 CM blade for it.


From Leathermans i own IMO has CX (PE) the best and sharpest blade, its better than the blade from charge tti. Also MUT seems to have better blade than the Surge i usually edc.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 05, 2014, 11:16:17 PM
I wish LM would put a cm154 or a s30v blade on the Surge.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 06, 2014, 12:03:25 AM
Just Sat in my pocket all day
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 06, 2014, 12:22:55 AM

I am new to Skelly world and already having buyers remorse, should I get the CX and give this one to a friend?

What is it about the Skelly that is making you not like it?

I have the regular Skelly also and do not feel the need to "upgrade" although I am pretty sure I want to score a PE 154 CM blade for it.


From Leathermans i own IMO has CX (PE) the best and sharpest blade, its better than the blade from charge tti. Also MUT seems to have better blade than the Surge i usually edc.
I agree, i like the blade on Skulle more than on my Mini-Surge, disregarding the type of steel.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 06, 2014, 12:33:30 AM
This is where LM's bit system failed.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 06, 2014, 12:34:33 AM
I wish LM would put a cm154 or a s30v blade on the Surge.

+1 This would make it almost perfect  :multi:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 06, 2014, 12:54:51 AM
This is where LM's bit system failed.

would the bit extender have helped, or are the holes too small? :think: I can't tell for sure from the pic.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on December 06, 2014, 01:02:00 AM


This is where LM's bit system failed.

This represents a large portion of my Phillips needs, and is why I really enjoy my Super Tinker.  For this month, I've stashed a couple dedicated Phillips drivers around (I did the same during the minimal SAK challenge a while ago).
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 06, 2014, 01:46:11 AM
This is where LM's bit system failed.

would the bit extender have helped, or are the holes too small? :think: I can't tell for sure from the pic.
The holes are simply too small for the bit to pass through, even it did, it won't reach deep enough.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 06, 2014, 01:47:08 AM
Child proofing a whole bunch pine cones for an art project.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 06, 2014, 02:47:52 AM
Really big cones out there! Here are the biggest nearly half size of skele!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Aloha on December 06, 2014, 02:55:30 AM
Child proofing a whole bunch pine cones for an art project.

The urban planner must have loved pine trees cause here we also have a bunch of them. 
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 06, 2014, 03:03:26 AM
I wish LM would put a cm154 or a s30v blade on the Surge.

+1 This would make it almost perfect  :multi:

+1000  :drool:


even it did, it won't reach deep enough.

I often have this problem too.  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 06, 2014, 03:04:51 AM



even it did, it won't reach deep enough.

I often have this problem too.  :facepalm:
Leave your comrades alone.  :rant:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 06, 2014, 03:06:09 AM
The few days with the Skeletool showed me that this is perfect for my requirements and I gave the normal version to a good friend tonight.
Also called "my dealer" and will be picking up a skeletool cx and bit kit tomorrow morning.

Better blade now makes sense for long term use.

I am jealous of your one day turn around.

Prolly best I have to wait a month for new stuff though.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 06, 2014, 03:07:18 AM



even it did, it won't reach deep enough.

I often have this problem too.  :facepalm:
Leave your comrades along.  :rant:

Along what? or where maybe?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 06, 2014, 03:07:38 AM
The few days with the Skeletool showed me that this is perfect for my requirements and I gave the normal version to a good friend tonight.
Also called "my dealer" and will be picking up a skeletool cx and bit kit tomorrow morning.

Better blade now makes sense for long term use.
:tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 06, 2014, 03:12:07 AM
The few days with the Skeletool showed me that this is perfect for my requirements and I gave the normal version to a good friend tonight.
Also called "my dealer" and will be picking up a skeletool cx and bit kit tomorrow morning.

Better blade now makes sense for long term use.
:tu:

Don't forget an extension.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 06, 2014, 04:02:06 AM
Pieter From No Church would be the most probable.
A MUT will make me look fat and I sold my AR15.

Pete the atheist has been proposed as well  :D
Unless you are very thin, the MUT adds presence, just ask Batman.
"HEY BATMAN...CHECK THIS OUT", this is how the MUT description starts on the Oz Leatherman site.

I am new to Skelly world and already having buyers remorse, should I get the CX and give this one to a friend?

I could not bond with a Skelly. The blade was just not the right shape and I found the tool odd to use. I was used to a Charge Ti that I still carry most of the time.

The MUT is a different beast. I like the blade very much and having a hammer always helps.  ;).

Cheers,

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 06, 2014, 04:07:59 AM
I could just carry a Surge for the same weight as a MUT.

Know which I would rather have? I bet you do.

Just saying the point of the Skelly is the enormus weight savings IMO.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 06, 2014, 04:24:38 AM

From Leathermans i own IMO has CX (PE) the best and sharpest blade, its better than the blade from charge tti. Also MUT seems to have better blade than the Surge i usually edc.

Interesting observation. From the ones you quoted I prefer the Surge Plain blade out of all the LM's I have. MUT is excellent, but I prefer the Charge blade over the MUT. I have not tried to sharper the MUT yet, it seems to hold it's edge quite well. That said I have not used it for serious cutting. Fruit and sausages is hardly a challenge for the MUT, or any LM for that matter  :D

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 06, 2014, 04:38:50 AM
I could just carry a Surge for the same weight as a MUT.

Know which I would rather have? I bet you do.

Just saying the point of the Skelly is the enormus weight savings IMO.

True, I would rather have the Surge too, but that is not part of this month's challenge.

I wanted two things from this challenge:
-> Can I EDC such a big heavy tool?
-> Does the leather sheath for the MUT hold up.
The Surge has more of the tools that I use on a daily basis, but that was not the point of this challenge. I miss the scissors the most.

I think this challenge is a fantastic opportunity to see how we can "survive" with a minimalist type tool. It is good to see how our perceptions are going to change during this month. As I said before, I could not bond with a Skelle, but I am happy to see that there are a lot of users here that do enjoy it.
I think the same can be said for the MUT. The biggest drawback is the weight. I have had to change my selection of pants for this month too, my usual "rugby" shorts cannot cope with the weight. I'm in 1/2 jeans for the rest of the month, or a pair of trousers that I can add a belt too. A here is where the Skelle shines!

Once again thank you Kampfer for taking us out of our comfort zone!!!

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 06, 2014, 04:40:54 AM
Slow day, basic cutting chores, pulled some staples.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 06, 2014, 04:42:41 AM
Interesting insights Pete! :multi:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 06, 2014, 04:47:41 AM
Pete called his shorts half jeans.  :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 06, 2014, 05:12:05 AM
Pete called his shorts half jeans.  :rofl:

 :D yea well English is not my first language  :D

They are 1/2 long, 1/2 short? Maybe I'll call them knee high?

I think it is a good time for some more caffeine!

Cheers,

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 06, 2014, 05:41:57 AM
Pete called his shorts half jeans.  :rofl:

 :D yea well English is not my first language  :D

They are 1/2 long, 1/2 short? Maybe I'll call them knee high?

I think it is a good time for some more caffeine!

Cheers,

Pete

Oh I thought that is what you called them where you are from.

Not as fun when it is just a translation error.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 06, 2014, 07:24:35 AM
He could have said Jean Pant.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 06, 2014, 08:42:19 AM
He could have said Jean Pant.

That is Gold and add a good Benoni accent to it too.  :D

Back on Topic...

Day six on the challenge.

No real tasks today. I cut a few pieces of string to tie motorcycle helmet insides that was washed. We had quite a few 35+ degree days here in Sydney. My helmet took a bit of a beating with a very sweaty forehead.

Second task was teaching the neighbor's kids how to make a box knot lanyard with para-cord. The cuts were not as clean as with a scissors, but the serrated part of the MUT blade made cutting easy. I tried the V-cutter, which worked but it was a very rough cut. The cutter is sharp though. The kids had lots of fun cutting the para cord insides through the V-cutter.

Enjoy the weekend

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 06, 2014, 10:24:48 AM
Some late night snack prepared by wife.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 06, 2014, 02:36:44 PM
Child proofing a whole bunch pine cones for an art project.


Seems like child got the project ready  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 06, 2014, 03:31:37 PM
Some late night snack prepared by wife.

Yum.

As for me and my Skelly we did nothing. Still working in the TOC and after finally getting off after only a regular eight hour shift I went to sleep.

Oh wait Skelly helped make some markers for the analog map and cut open some cream cheese packets for breakfast.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 06, 2014, 06:03:17 PM
I think I have found my favourite EDC setup, this gives me  the most options and tools for my daily light duty needs.


I would like to hear what is the most useful bit to carry in the tool?
I have put in the Philips and flat combo bit as well as the small torx.
Stock is 2x Philips and 2x flat.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 06, 2014, 07:44:25 PM
I think I have found my favourite EDC setup, this gives me  the most options and tools for my daily light duty needs.


I would like to hear what is the most useful bit to carry in the tool?
I have put in the Philips and flat combo bit as well as the small torx.
Stock is 2x Philips and 2x flat.

Still have the stock bit selection in my Skelly.

On a side note CHEATER!

Have a good day.  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 06, 2014, 07:56:15 PM
He is not part of the challenge.
Normally I pair up a Micra with Skulle.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 06, 2014, 09:06:44 PM
The bottle opener is in use right now  :cheers:. I like the opener from mut and actually from skele even more but what the heck. Usually i edc surge but i never use the opener from it. Next year gonna try to show how i deal whit him that issue.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 06, 2014, 10:30:59 PM

He is not part of the challenge.

Normally I pair up a Micra with Skulle.


Lame, why not?

And good idea.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 07, 2014, 12:41:02 AM
're repurposed some wire from an old cellphone charger
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 07, 2014, 12:50:45 AM
My girl, helping with starting our fire tonight, she's looks for reasons to deploy her style Cs. Luckily she hasn't given herself a haircut yet.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 07, 2014, 05:26:58 AM
I could not commit to a tool I had never used before, December is probably my most active month as far a multitools go and I did not want to limit myself at this point. Holiday house at the coast needs constant tweaking and summer outdoor activities are full time till the 12th Jan for me now.

Having 14x SAKs incoming also played a part. But I am here learning about my new Skeletool CX and already getting benefits from it.

Good luck to all those doing the challenge.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 07, 2014, 05:35:46 AM
I could not commit to a tool I had never used before, December is probably my most active month as far a multitools go and I did not want to limit myself at this point. Holiday house at the coast needs constant tweaking and summer outdoor activities are full time till the 12th Jan for me now.

Having 14x SAKs incoming also played a part. But I am here learning about my new Skeletool CX and already getting benefits from it.

Good luck to all those doing the challenge.

Short version: Was scared.  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on December 07, 2014, 06:40:48 AM
Today was the day to hang Christmas lights.  A little late probably, but I'll just leave them up a little longer ;)

Used the blade to remove some tags from the lights.  Needed the pliers to remove a broken bulb from the socket.  Clipped a few pieces of plastic to modify the light clips, and used the flat driver to pry apart a (unplugged) socket for repair.

Nothing heavy duty, but being up on a ladder and having all these capabilities on a slim, lightweight tool, points for the Skele today. :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 07, 2014, 07:29:55 AM
 :surrender: :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 07, 2014, 07:30:12 AM
Today was the day to hang Christmas lights.  A little late probably, but I'll just leave them up a little longer ;)


Hmm I may have sent my Compact to the wrong address.

You did not say you was from Alabama.  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on December 07, 2014, 07:38:19 AM
Today was the day to hang Christmas lights.  A little late probably, but I'll just leave them up a little longer ;)


Hmm I may have sent my Compact to the wrong address.

You did not say you was from Alabama.  :whistle:
No, don't worry...I'll have them down well before June ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: mrynnr on December 07, 2014, 07:52:05 AM
All this talk of skeletool makes me want to carry mine too.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 07, 2014, 07:56:54 AM
All this talk of skeletool makes me want to carry mine too.

All the cool kids are doing it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: mrynnr on December 07, 2014, 07:59:36 AM

All this talk of skeletool makes me want to carry mine too.

All the cool kids are doing it.
i wanna be part of the gang too :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 07, 2014, 08:01:42 AM
Today was the day to hang Christmas lights.  A little late probably, but I'll just leave them up a little longer ;)


Hmm I may have sent my Compact to the wrong address.

You did not say you was from Alabama.  :whistle:
No, don't worry...I'll have them down well before June ;)

June?! Might as well leave them up at that point.

Past the point of no return.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 07, 2014, 08:02:22 AM

All this talk of skeletool makes me want to carry mine too.

All the cool kids are doing it.
i wanna be part of the gang too :)

I am sure a trade could be worked out. Maybe some kind of custom SAK?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: mrynnr on December 07, 2014, 08:05:36 AM


All this talk of skeletool makes me want to carry mine too.

All the cool kids are doing it.
i wanna be part of the gang too :)

I am sure a trade could be worked out. Maybe some kind of custom SAK?
aha thanks for the offer but... Never! I'm actually pocketing the old version CX as we speak.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 07, 2014, 08:07:25 AM
aha thanks for the offer but... Never!

I really need to figure out why the ladies keep saying this to me.  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 07, 2014, 08:11:52 AM
I could not commit to a tool I had never used before, December is probably my most active month as far a multitools go and I did not want to limit myself at this point. Holiday house at the coast needs constant tweaking and summer outdoor activities are full time till the 12th Jan for me now.

Having 14x SAKs incoming also played a part. But I am here learning about my new Skeletool CX and already getting benefits from it.

Good luck to all those doing the challenge.

Short version: Was scared.  :pok:
I think it is very wise. :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 07, 2014, 08:12:54 AM
All this talk of skeletool makes me want to carry mine too.

All the cool kids are doing it.
I agree.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 07, 2014, 08:14:33 AM

All this talk of skeletool makes me want to carry mine too.

All the cool kids are doing it.
I agree.



Sent from a device made from star dust using tapatalk
Title: Official 31-Day SKELETOOL* Challenge!
Post by: mrynnr on December 07, 2014, 08:15:26 AM
aha thanks for the offer but... Never!

I really need to figure out why the ladies keep saying this to me.  :facepalm:
word of advice... Don't mess with their precious
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 07, 2014, 08:46:50 AM
I was a little nervous about this weekend, since I usually carry my ReCharge on the weekends, but no problems so far. :tu:

pretty light duty today for my CX. trimmed some loose threads, opened some packages, turned some screws (got some use out of the bit kit, too), and opened some beverages tonight. :cheers:

scissors would have been nice, but the 154CM blade keeps such a nice edge that they weren't necessary. ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 07, 2014, 08:50:03 AM
G'Day,

A busy day here for the MUT. We took some old garden fences down and the MUT broke some old nails pretty easily. The hammer came in handy, but I eventually had to get a proper one, as I needed a little more punch. The saw is awesome, it never clogged. My son cut up an old vine with it. I just love Leatherman saws. One thing that it struggled with was old rusted phillips screws. There was just not enough strength in the bit holder to turn them screws. I could see how the bit holder was distorting under the pressure. I ended up using a proper screw driver, and even that struggled. Old fences can be hard work to take down.

The second big task was dismantling an old swing the kids have outgrown. I used the bit adapter again with a 4mm hex head to undo all the screws. These were rusted too, but I could manage them OK. I started using some gloves at this stage, my hands were getting tired. That gave me some extra hold.

One thing that is still a little strange is that one uses the MUT 1/2 open for any bit work. I think if you are going to force the tool in that position, something around the plier-head is going to break. In essence a lot of force is being put straight through the plier-head. I don't want to break the MUT, I think that a tool like the Surge will fair better in this instance.

I think the tool was happy doing some real work, none of this fruit cutting stuff  ;)

Tomorrow is a trip on the bike, if the weather holds. I'll have some decent pics of it out in the open air.

Have a good evening,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 07, 2014, 08:55:14 AM
Quote from: HarleyXJGuy link=topic=55539.msg1000642#msg1000642

All the cool kids are doing it.

 :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 07, 2014, 10:29:50 AM
The cap lifter on Skeletool is excellent, but has one found a practical use of the carabiner yet?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 07, 2014, 01:32:05 PM

The cap lifter on Skeletool is excellent, but has one found a practical use of the carabiner yet?

Negative


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: BIG-TARGET on December 07, 2014, 03:08:28 PM
All this talk of skeletool makes me want to carry mine too.
This talk, and watching Mythbusters, is doing it for me :angel:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 07, 2014, 04:54:53 PM
The cap lifter on Skeletool is excellent, but has one found a practical use of the carabiner yet?

Does it hold bottle caps after you open bottles? No cap bottles here to try it on.

Other then that I got nothing.

Had a bit of a situation today, got off work and slept through dinner chow. What is a guy to do.

First one has to restock the fridge with some high quality H2O.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1119141957c.jpg~original)

Little different here but tastes fine.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1119141958.jpg~original)

Now to make some of the classic empty calorie food used by poor college students and Soldiers the world over.

Bon Appetit!

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1119142002a.jpg~original)

Good job Skelly.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 07, 2014, 05:47:02 PM
Not much for the skeletool today but feather firewood for the fireplace, as usual. The blade has improved greatly after some more sharpening.


Sent from a device made from star dust using tapatalk
Title: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 07, 2014, 06:59:47 PM
Slow weekend for skele, cutting package's is about it.


Sak's  rule !
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 07, 2014, 09:11:55 PM
The cap lifter on Skeletool is excellent, but has one found a practical use of the carabiner yet?
Does it hold bottle caps after you open bottles? No cap bottles here to try it on.
It does, but would it matter one way or another?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 07, 2014, 11:44:40 PM
Using the hex bit from bit kit to put together a play set for my boy. T-handle offers a lot of force to turn them screws.
Crucial, Octane & PowerDuo can only dream about this.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 07, 2014, 11:51:13 PM
About to go fruit ninjas on a banana
Title: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 08, 2014, 03:41:54 AM
So far so good. However I must say I honestly hate the tip down only pocket clip on my Leatherman. Constantly feels like it is going to fall out of my pocket. I am having a pretty hard time not having screwdrivers on me either. All I have is a blade and pliers. I feel naked.


-AdmSlc
Why didn't you go with a Skeletool instead?

I only have the freestyle and the MUT that are in the skeletool challenge. I wanted a heck of a challenge since  carrying the MUT would be a lot easier for me.


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 08, 2014, 04:36:06 AM

I only have the freestyle and the MUT that are in the skeletool challenge. I wanted a heck of a challenge since  carrying the MUT would be a lot easier for me.

-AdmSlc

You get used to the MUT, but need belted pants  :D

I'm certainly enjoying using the MUT daily.

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 08, 2014, 05:03:31 AM
The cap lifter on Skeletool is excellent, but has one found a practical use of the carabiner yet?
Does it hold bottle caps after you open bottles? No cap bottles here to try it on.
It does, but would it matter one way or another?

No not at all, just trying to find a use for it however worthless.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 08, 2014, 07:10:19 AM
The carabiner is the most iconic feature of the entire Skeletool family (except Freestyle & Style), while I think it has very limited practical use, it looks good.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 08, 2014, 07:22:26 AM
The carabiner is the most iconic feature of the entire Skeletool family (except Freestyle & Style), while I think it has very limited practical use, it looks good.

Yep, plus it does not add much weight at all.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 08, 2014, 07:49:19 AM
Using the hex bit from bit kit to put together a play set for my boy. T-handle offers a lot of force to turn them screws.
Crucial, Octane & PowerDuo can only dream about this.

I used hex bits from the bit kit to put together a craft table for my wife today. Like you said, T-handle offers a lot of force to tighten the screws. :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 08, 2014, 10:49:50 AM
G'Day,

Day 8 with the MUT.

I planned a motorbike trip with a friend today, however the Sydney weather gods did not play with. We have been having some strange storms the last week and today was no exception. So there was no bike trip.  :( I've been hanging out for a decent ride in dry weather, it would have been the last good ride before the new bike arrives.

MUT duties was relegated to opening parcels with reproofing for soft panniers and extension straps. The long bits also came in handy to put a broom handle up in the broom cupboard  ;). No real pressure on the bits like yesterday in the garden.

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Mr Biriyani on December 08, 2014, 02:56:56 PM
I was inspired by this thread and used my Skeletool cx for som days until I found yesterday that I lost the bit that was in the handle even though I have pinched the metal part to secure it. Very annoying. :rant:

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 08, 2014, 03:25:45 PM

I was inspired by this thread and used my Skeletool cx for som days until I found yesterday that I lost the bit that was in the handle even though I have pinched the metal part to secure it. Very annoying. :rant:

Bummer !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 08, 2014, 07:24:17 PM
So after a week of Skeletooling, any one miss his dedicated folder yet?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 08, 2014, 08:37:10 PM
So after a week of Skeletooling, any one miss his dedicated folder yet?
YES!!! Big time!!!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 08, 2014, 08:46:47 PM

So after a week of Skeletooling, any one miss his dedicated folder yet?

Yes, just because I don't like the CB.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 08, 2014, 08:48:33 PM
Drywall repairs and base boards so for.

(http://tapatalk.imageshack.com/v2/14/12/08/dcc5ef80c1434ab1a40669b1d91300d7.jpg)

(http://tapatalk.imageshack.com/v2/14/12/08/8bd658ed1c5ebca715333af1db44e63b.jpg)

(http://tapatalk.imageshack.com/v2/14/12/08/74f5c744ef3e81190e32f7ee0e30bb76.jpg)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 08, 2014, 11:53:45 PM
So after a week of Skeletooling, any one miss his dedicated folder yet?

So much concur with Nate and Colt.

I tried, but my dislike of the SE and more so the CE continues. Only thing worse to me then a CE blade is a short CE blade.

Not only that but stupid TTT does not have any Skelly PE blades in stock.

Please do not take my dislike for the CE or SE personal. If you like them I support your choice of a sub standard blade, it is just not for me.  :whistle:

Also it is in no way a indication on the Skeletool which I am enjoying.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 08, 2014, 11:56:58 PM
So after a week of Skeletooling, any one miss his dedicated folder yet?

So much concur with Nate and Colt.

I tried, but my dislike of the SE and more so the CE continues. Only thing worse to me then a CE blade is a short CE blade.

Not only that but stupid TTT does not have any Skelly PE blades in stock.

Please do not take my dislike for the CE or SE personal. If you like them I support your choice of a sub standard blade, it is just not for me.  :whistle:

Also it is in no way a indication on the Skeletool which I am enjoying.

Reprofile it into a PE.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 09, 2014, 12:01:40 AM
So after a week of Skeletooling, any one miss his dedicated folder yet?

So much concur with Nate and Colt.

I tried, but my dislike of the SE and more so the CE continues. Only thing worse to me then a CE blade is a short CE blade.

Not only that but stupid TTT does not have any Skelly PE blades in stock.

Please do not take my dislike for the CE or SE personal. If you like them I support your choice of a sub standard blade, it is just not for me.  :whistle:

Also it is in no way a indication on the Skeletool which I am enjoying.

Reprofile it into a PE.

It pains me to say but, good idea.  :whistle:

The only reason I have not is because I really want to give it a fair shake. Well that and I have a Spyderco Sharp maker and am not looking forward to how long that would take. Might call for a trip to the Motor Pool and put one of there grinders to use.

I am a big Spyderco fan boy and want to love Spyder Edge. Alas it just des not seem to be in the cards.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 09, 2014, 12:15:53 AM
for those not liking the CE blade (and I don't blame you, I absolutely detest CE blades!), beavs1965 has some PE Skeletool blades listed in his "parts for sale (http://forum.multitool.org/index.php/topic,56283.0.html)" thread.

I'm currently working out a deal with him and will provide appropriate feedback once it's completed. :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 09, 2014, 12:18:24 AM

for those not liking the CE blade (and I don't blame you, I absolutely detest CE blades!), beavs1965 has some listed in his "parts for sale (http://forum.multitool.org/index.php/topic,56283.0.html)" thread.

I'm currently working out a deal with him and will provide appropriate feedback once it's completed. :salute:

Salute !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 09, 2014, 12:26:58 AM
for those not liking the CE blade (and I don't blame you, I absolutely detest CE blades!), beavs1965 has some PE Skeletool blades listed in his "parts for sale (http://forum.multitool.org/index.php/topic,56283.0.html)" thread.

I'm currently working out a deal with him and will provide appropriate feedback once it's completed. :salute:

Please do.  :tu:
Title: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 09, 2014, 01:20:24 AM
Skele rescue,

At my sons school, this guys car wouldn't start " bad battery connection " whipped out the skeletool an loosened the battery terminal connection, a quick clean an install and it fired up. Score ! Wanted to take a pic but seemed kind of weird.


Sak's  rule !
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 09, 2014, 02:14:26 AM
Saved the day!  :hatsoff:
Not sure the regulation of your son's school, but here in CA it is illegal to have locking blade over 3" in school ground, Skeletool is perfectly legal. (As far as how I understood the law, it is very confusing.)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 09, 2014, 02:35:00 AM
cheese time
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 09, 2014, 02:55:02 AM

Saved the day!  :hatsoff:
Not sure the regulation of your son's school, but here in CA it is illegal to have locking blade over 3" in school ground, Skeletool is perfectly legal. (As far as how I understood the law, it is very confusing.)

Oh I am sure it's big NO NO, no knives at all. I'm sly :)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 09, 2014, 02:58:55 AM
This thread has made me notice something.

I am willing to bet 90% of us could get by with just a Skeletool and some scissors (Micra or SAK).

Most of what I see is food prep and screwing.  :whistle:

Just an observation.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 09, 2014, 03:05:59 AM
This thread has made me notice something.

I am willing to bet 90% of us could get by with just a Skeletool and some scissors (Micra or SAK).

Most of what I see is food prep and screwing.  :whistle:

Just an observation.
Yes, I believe that what Skeletool is designed for.
For my daily suburban life, I am perfectly happy with Skulle + Micra.
If I was going outdoor, adding a saw would be nice.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 09, 2014, 03:09:04 AM
This thread has made me notice something.

I am willing to bet 90% of us could get by with just a Skeletool and some scissors (Micra or SAK).

Most of what I see is food prep and screwing.  :whistle:

Just an observation.
Yes, I believe that what Skeletool is designed for.
For my daily suburban life, I am perfectly happy with Skulle + Micra.
If I was going outdoor, adding a saw would be nice.

Adding a saw is a good idea, or a file.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 09, 2014, 03:11:16 AM
I could really use a saw !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 09, 2014, 03:12:08 AM
Wouldn't it be nice to have a blade exchanger on Skeletool?
It should comes with three optional things that you attached to it as you saw fit the day: Saw, Scissors, File.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 09, 2014, 03:13:26 AM
Wouldn't it be nice to have a blade exchanger on Skeletool?
It should comes with three optional things that you attached to it as you saw fit the day: Saw, Scissors, File.

Replace the carabiner with some sort of fixed exchanger?

I r smart.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 09, 2014, 03:15:16 AM

Wouldn't it be nice to have a blade exchanger on Skeletool?
It should comes with three optional things that you attached to it as you saw fit the day: Saw, Scissors, File.

I think you are on to something.
Big Time !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 09, 2014, 03:34:30 AM

Wouldn't it be nice to have a blade exchanger on Skeletool?
It should comes with three optional things that you attached to it as you saw fit the day: Saw, Scissors, File.

I think you are on to something.
Big Time !


Sak's  rule !

Feel free to use my idea Tim.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 09, 2014, 08:38:00 AM
This thread has made me notice something.

I am willing to bet 90% of us could get by with just a Skeletool and some scissors (Micra or SAK).

Most of what I see is food prep and screwing.  :whistle:

Just an observation.

I think you are spot-on.

I have noticed that with the MUT most of my daily use it is sufficient for. Some work duties call for a file or scissors which the MUT does not have. I still have not used a file at work at all in the four years I have been driving trains. A Micra can fulfill the scissors duties, but I don't like it. For a specialized tool, it does stand up to daily use pretty well.
I can now start to appreciate the tool layout in the Wave (old or new) and the Charge. There is no perfect tool, but this thread shows with how "little" we can get by.  ;)

As for day 9's use, none whatsoever. Never left the pouch. I had a full day's errands to run, school prize giving to attend and neither required any MT use. I'm back at work tomorrow and at lunch duties will be called on.

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 09, 2014, 09:06:29 AM

A Micra can fulfill the scissors duties, but I don't like it.


Scissors on the SAK's are pretty good and you canget models with Saws and or Files.

Just saying.  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 09, 2014, 09:35:47 AM
Scissors on the SAK's are pretty good and you canget models with Saws and or Files.

Just saying.  :pok:

Agreed, but I prefer to carry a single tool. My usual EDC is an Original Wave or Charge Ti. Scissors is better/bigger on the Wave, however I have not had any issues with the Charge scissors.

After this month I might EDC a Surge for a while as it has most of the tools I need.

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 09, 2014, 09:39:18 AM

Agreed, but I prefer to carry a single tool.


You are new here but that will be fixed soon enough.  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 09, 2014, 09:43:57 AM
As the biggest storm in recent history is approaching, I will be filling up sandbags tomorrow, let's see if I need Skulle's help.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 09, 2014, 10:02:59 AM

Agreed, but I prefer to carry a single tool.


You are new here but that will be fixed soon enough.  :whistle:

Indeed, lurked for a while...

Carry does not equate to own though...  :D The LM bug bit a long time ago, however, it takes lots of play time to build tool experience.

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 09, 2014, 10:05:12 AM
As the biggest storm in recent history is approaching, I will be filling up sandbags tomorrow, let's see if I need Skulle's help.

Good luck, we have just come through a week of storms, hail and strong winds.

Filling bags with a Skulle may take a while  :facepalm:

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 09, 2014, 10:08:51 AM
As the biggest storm in recent history is approaching, I will be filling up sandbags tomorrow, let's see if I need Skulle's help.

Good luck, we have just come through a week of storms, hail and strong winds.

Filling bags with a Skulle may take a while  :facepalm:

Pete

Might be faster to just use a shovel.

Stay safe.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 09, 2014, 10:14:34 AM
I have a good collection of miltary shovels.
I must decide which one to use.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 09, 2014, 05:47:32 PM
I miss scissors from surge. Today at work was much cutting and bending 3-5 mm stainless rods with MUT. Realized that with bare hands cutting rods with mut is pretty painful comparing to surge!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 09, 2014, 05:53:45 PM
I have a good collection of miltary shovels.
I must decide which one to use.

Own 2 mil shovels. One swedish armi and one switzerland/germany one (this folds to 3 and looks like U.S one)
The last one use i in metal detecting fieldtrips.   
Title: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 09, 2014, 06:16:24 PM
Basic stuff today.

(http://tapatalk.imageshack.com/v2/14/12/09/2df0f63967f677a1ada86e5c21cc3a40.jpg)

(http://tapatalk.imageshack.com/v2/14/12/09/87542f80039121c9ba4ecbd4a6af5503.jpg)


Sak's  rule !
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 09, 2014, 08:11:41 PM


Agreed, but I prefer to carry a single tool.
There is also advantage of having two tools, in case you forgot / dropped / lost one, you have another one to get by.
When my wife needs something, I let her use the Micra, although she has a Classic SD on her keys.

The reason I chose Micra as Skulle's partner is because it has a good size scissors which is easy to use comparing to other scissors on MT. Also Micra has an array of small drivers for delicate tasks which Skulle lacks.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Aloha on December 09, 2014, 08:20:29 PM
This thread has made me notice something.

I am willing to bet 90% of us could get by with just a Skeletool and some scissors (Micra or SAK).

Most of what I see is food prep and screwing.  :whistle:

Just an observation.

What else is there  :think:

I carried the Skele but quickly realized it just wasn't for me.  Totally capable tool has all three basics covered knife, pliers, screwdriver. 
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 09, 2014, 08:21:24 PM
Boosting morale: If people can survive the two layers SAK challenge, why can't we survive December with a Skeletool?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 09, 2014, 09:18:43 PM
I like to switch my edc according to what's going on that day, while the skele falls short in a lot of areas, it is by far better than nothing.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 10, 2014, 12:32:52 AM
Agreed, but I prefer to carry a single tool.
There is also advantage of having two tools, in case you forgot / dropped / lost one, you have another one to get by.
When my wife needs something, I let her use the Micra, although she has a Classic SD on her keys.

The reason I chose Micra as Skulle's partner is because it has a good size scissors which is easy to use comparing to other scissors on MT. Also Micra has an array of small drivers for delicate tasks which Skulle lacks.

I sometimes pair a Style CS with my Skele (but not this month, obviously) for the scissors and small driver. I like how easily it clips to my key ring, plus I've never been a big fan of the Micra for some reason... maybe I need to give it another chance. :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 10, 2014, 01:49:11 AM
used mine for cutting rope for knot tying at cub scouts
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 10, 2014, 02:42:34 AM
I wish my office job allowed  me more opportunities to use my MTs. I just sit in an office all day and wish I could have more hands on situations where I could deploy my MT.


-AdmSlc
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 10, 2014, 03:15:24 AM
This thread has made me notice something.

I am willing to bet 90% of us could get by with just a Skeletool and some scissors (Micra or SAK).

Most of what I see is food prep and screwing.  :whistle:

Just an observation.

What else is there  :think:


Beer?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 10, 2014, 03:22:57 AM
No screwing around for me.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 10, 2014, 03:57:03 AM
This thread has made me notice something.

I am willing to bet 90% of us could get by with just a Skeletool and some scissors (Micra or SAK).

Most of what I see is food prep and screwing.  :whistle:

Just an observation.

What else is there  :think:


Beer?

I'll drink to that! :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 10, 2014, 05:34:21 AM
Easy day for Skulle today, opened a few packages, that is about it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 10, 2014, 05:37:03 AM
I wish my office job allowed  me more opportunities to use my MTs. I just sit in an office all day and wish I could have more hands on situations where I could deploy my MT.


-AdmSlc
You can use the freestyle as manual paper shredding machine..
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 10, 2014, 10:29:45 AM
G'Day,

Day 10 with the Mighty MUT.

A big smile on the MUT's face  :D with lots of real work.

I used the saw to cut old garden trellises. The wood was very dry, but that was no problem for the MUT. I sawed through 54 2" pieces. My shoulders took more of a beating that the MUT. And for a change, it was good to be left handed. The flat non clip side was facing away from my palm and I could saw without any discomfort. I'm impressed with the saw. As a comparison, my son used the Surge, good saw, but slightly more bendy and not as long. Saw scored better on the MUT  than on the Surge.

Lunch duties was some cold meats and fruit, no real challenge here.

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 10, 2014, 10:38:40 AM

There is also advantage of having two tools, in case you forgot / dropped / lost one, you have another one to get by.
When my wife needs something, I let her use the Micra, although she has a Classic SD on her keys.

The reason I chose Micra as Skulle's partner is because it has a good size scissors which is easy to use comparing to other scissors on MT. Also Micra has an array of small drivers for delicate tasks which Skulle lacks.

Agree with that. I have a "backup PST" in my backpack bag that I use to carry stuff between home and the train depot. My work EDC usually stays in my work bag and only comes home if it needs a good clean or sharpen. I always put another tool in the work bag once the EDC comes out. So in essence I do carry more than one tool, but a different times. If that makes sense.

I also recently bought a VIC for lunch duties, but it lacked the cocktail fork. For those duties I have modified an old Flair to stay in my lunchbox, VIC is now in the kitchen. But the Flair will not do any hardcore work duties. Blokes on the railways will look strange at me if I suddenly pull a Flair out to fix something, where as they are pretty used to me having a bigger or more dedicated LM.  :D

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: BIG-TARGET on December 10, 2014, 02:17:30 PM
I've always carried one of the of these in my pocket since the beginning of the Skeletool series. 
I've passed this challenge dozens of times over :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 10, 2014, 03:27:17 PM
(http://tapatalk.imageshack.com/v2/14/12/10/15189322731f8341e1171f4d06b3fb53.jpg)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 10, 2014, 05:37:53 PM
Today i cut fingernails with the wire cutter from mut and the blade did the work what usualy the file does..
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 10, 2014, 05:39:29 PM
Today i cut fingernails with the wire cutter from mut and the blade did the work what usualy the file does..
:salute: Creative way to MUT it.
I done that with Mini-Surge, but don't think Skulle can do that.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 10, 2014, 05:41:36 PM
I was thinking about same thing doing this.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 10, 2014, 05:44:48 PM

I sometimes pair a Style CS with my Skele (but not this month, obviously) for the scissors and small driver. I like how easily it clips to my key ring, plus I've never been a big fan of the Micra for some reason... maybe I need to give it another chance. :think:
If I choose one to put on keychain, I would go with Style CS, but since I am keeping the tool inside a pouch, Micra is the way to go, for me.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 10, 2014, 05:52:51 PM
Don`t own a Micra but if the Style PS had the blade from  CS it would be just perfect. Lost one CS in may and bought quickly a new one but PS was already in keychain and so it went. I`m still thinking the best mod way to install the CS blade to PS.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 10, 2014, 05:56:29 PM
Don`t own a Micra but if the Style PS had the blade from  CS it would be just perfect. Lost one CS in may and bought quickly a new one but PS was already in keychain and so it went. I`m still thinking the best mod way to install the CS blade to PS.
Like this?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 10, 2014, 06:04:31 PM
Light day for the skele today.
Opening a package and lunch.



Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 10, 2014, 06:07:47 PM
This would be a simple toolchange. I`m thinking to keep scissors and add the blade. One idea was to replace the file but thats also  :-\
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 10, 2014, 06:11:09 PM
This would be a simple toolchange. I`m thinking to keep scissors and add the blade. One idea was to replace the file but thats also  :-\
I seen "Evil" was able to install scissors and blade on top of each other, it was more involve than just simple tool swap.
I done that Mini-Skeletool was just a test of concept.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 10, 2014, 06:22:08 PM
Yes i have seen that mod but it`s not the thing what i`m looking. I don`t know when i discovered this site but i have read i think almost all the threads here  :D. My Surge was polished in 2007 and i made a bit kit with expansion the same year. Once i discovered this site it was something what i cant to put into words. There are more freaks like me somewhere outside and and even more insane and freaks like me. :D First thing i did was showing Chako`s collection to my wife  :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 10, 2014, 06:46:11 PM
First thing i did was showing Chako`s collection to my wife  :D

Yikes, rookie mistake.  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 10, 2014, 08:09:07 PM
Just getting hammered today !

(http://tapatalk.imageshack.com/v2/14/12/10/70a5213bf23e671888f46c0d9a58a279.jpg)

(http://tapatalk.imageshack.com/v2/14/12/10/dfc33636fe95d03575efb67f8daad306.jpg)

(http://tapatalk.imageshack.com/v2/14/12/10/f97849acd8cdcfbaa463a27e3ca0cfe9.jpg)

(http://tapatalk.imageshack.com/v2/14/12/10/69a1c9f4507a9dc4768627b745d3892e.jpg)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 10, 2014, 08:42:38 PM
Your Skeley is working hard! :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 10, 2014, 08:46:35 PM

Your Skeley is working hard! :tu:

It's way under powered but gets the job done !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 10, 2014, 08:48:33 PM

Your Skeley is working hard! :tu:

It's way under powered but gets the job done !


Sak's  rule !
I did not expect a professional would even enter the challenge with a Skeley, points for both of you! :hatsoff:
You are really pushing Skeley to its limits and way above of its design intent.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 10, 2014, 08:54:37 PM


Your Skeley is working hard! :tu:

It's way under powered but gets the job done !


Sak's  rule !
I did not expect a professional would even enter the challenge with a Skeley, points for both of you! :hatsoff:
You are really pushing Skeley to its limits and way above of its design intent.

To be honest, I thought it would have broke by now but it is as solid as the day I bought it. Hats off to leatherman.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 10, 2014, 08:59:08 PM
And to G. Klecker.

I noticed there are more people here Skeletooling this month than before, even they didn't take part in the challenge. ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 10, 2014, 09:01:41 PM


(http://tapatalk.imageshack.com/v2/14/12/10/f97849acd8cdcfbaa463a27e3ca0cfe9.jpg)

You know it would feel better if your head is placed in the other handle while you are screwing?

^
That sounds so wrong. :P
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 10, 2014, 09:32:05 PM



(http://tapatalk.imageshack.com/v2/14/12/10/f97849acd8cdcfbaa463a27e3ca0cfe9.jpg)

You know it would feel better if your head is placed in the other handle while you are screwing?

^
That sounds so wrong. :P

Lol,, roger that !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 10, 2014, 10:43:20 PM


Your Skeley is working hard! :tu:

It's way under powered but gets the job done !


Sak's  rule !
I did not expect a professional would even enter the challenge with a Skeley, points for both of you! :hatsoff:
You are really pushing Skeley to its limits and way above of its design intent.

To be honest, I thought it would have broke by now but it is as solid as the day I bought it. Hats off to leatherman.


Sak's  rule !
you and me both. I has only let me down just a few times. but so far, not bad.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 11, 2014, 12:15:49 AM



Your Skeley is working hard! :tu:

It's way under powered but gets the job done !


Sak's  rule !
I did not expect a professional would even enter the challenge with a Skeley, points for both of you! :hatsoff:
You are really pushing Skeley to its limits and way above of its design intent.

To be honest, I thought it would have broke by now but it is as solid as the day I bought it. Hats off to leatherman.


Sak's  rule !
you and me both. I has only let me down just a few times. but so far, not bad.

Oh how I miss a full size tool.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 11, 2014, 12:36:43 AM
Yes, me too.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 11, 2014, 01:15:14 AM
Toast any one
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 11, 2014, 01:32:17 AM
This would be a simple toolchange. I`m thinking to keep scissors and add the blade. One idea was to replace the file but thats also  :-\

(https://farm4.staticflickr.com/3695/9542765389_07fdbe899b.jpg) (https://flic.kr/p/fxgaFK)

(https://farm6.staticflickr.com/5487/9542765163_bddc909449.jpg) (https://flic.kr/p/fxgaBR)

(https://farm6.staticflickr.com/5473/9551226053_21f1db6f82.jpg) (https://flic.kr/p/fy1wKg)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Jothra on December 11, 2014, 03:39:44 AM
I know I'm really late to this game, but I have a pretty high opinion of the Skeletool. I used one to tie most of a 50' x 25' x 2', two-layer, 12" on centre, upright-brace-every-two-feet-in-every-direction 10m rebar cage one time. Don't ask about the circumstances; it's a short story, and also boring.

Though it did take a very large crane to lift afterwards. I should see if I can find the picture.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 11, 2014, 09:34:04 AM
G'day,

Day 11 with the MUT.

It was a very easy day: lunch duties and a bit of show and tell. A police officer looking after the trains had a good look at the MUT and quite likes it. No issues with carrying and I was playing nice. When I mentioned what the design and what MUT is all about his eyes lit up. Hopefully another convert. He was carrying a Charge though. A good man he is  :salute:

I must admit I'm very impressed with how the challenge is going and how the Ske(u)llies are holding up.  :cheers: to all for hanging in here!!!

Cheers,

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Etherealicer on December 11, 2014, 09:39:32 AM
I know I'm really late to this game, but I have a pretty high opinion of the Skeletool. I used one to tie most of a 50' x 25' x 2', two-layer, 12" on centre, upright-brace-every-two-feet-in-every-direction 10m rebar cage one time. Don't ask about the circumstances; it's a short story, and also boring.

Though it did take a very large crane to lift afterwards. I should see if I can find the picture.
Jothra is back :ahhh

What is the next 30-day challenge :ahhh, I would like to see a Wenger :ahhh
Hey, hope all is well with you :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 11, 2014, 09:45:15 AM
I know I'm really late to this game, but I have a pretty high opinion of the Skeletool. I used one to tie most of a 50' x 25' x 2', two-layer, 12" on centre, upright-brace-every-two-feet-in-every-direction 10m rebar cage one time. Don't ask about the circumstances; it's a short story, and also boring.

Though it did take a very large crane to lift afterwards. I should see if I can find the picture.
Welcome to the party! :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 11, 2014, 10:00:25 AM
Skeley helped me work on a SOG.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 11, 2014, 10:10:35 AM
A VIP agreed to draw out a winner after this challenge is completed. (Might not be immediately due to his busy schedule).

Oh yes, he has been watching us.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 11, 2014, 07:25:19 PM

Oh how I miss a full size tool.


I do not even know where to start with the insults and childish jokes on this one.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 11, 2014, 07:28:31 PM
I know I'm really late to this game, but I have a pretty high opinion of the Skeletool. I used one to tie most of a 50' x 25' x 2', two-layer, 12" on centre, upright-brace-every-two-feet-in-every-direction 10m rebar cage one time. Don't ask about the circumstances; it's a short story, and also boring.

Though it did take a very large crane to lift afterwards. I should see if I can find the picture.
Jothra is back :ahhh

What is the next 30-day challenge :ahhh, I would like to see a Wenger :ahhh
Hey, hope all is well with you :salute:

Jothra was saying in another thread things are all good with him. Also I noticed something about a cancelled Rebar 30 days challenge in your sig Jothra. Anyone know why what should have been an epic challenge was cancelled? Not enough of a challenge cause Rebars rule I bet.

Wenger challenge is a good idea since they are sort of going away. How many layers? And I am thinking it would be a lot like the minimalist challenge we just had.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 11, 2014, 07:29:47 PM
my CX helped me put together a craft table for my wife last night. I ended up needing a couple different hex bits from the bit kit, and discovered that the Skele plier head was the perfect size for this particular job... ReCharge pliers would have been too bulky.

and of course, there was a refreshing beverage that needed to be opened once I finished the project. :D

also, I really need to start remembering to take pics. :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 11, 2014, 07:30:48 PM
A VIP agreed to draw out a winner after this challenge is completed. (Might not be immediately due to his busy schedule).


While I am in agreement that Harley is a VIP, I do not remember agreeing to this?

In my defense there is a war going on so there is nothing I can do about my busy schedule.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 11, 2014, 07:32:06 PM
my CX helped me put together a craft table for my wife last night. I ended up needing a couple different hex bits from the bit kit, and discovered that the Skele plier head was the perfect size for this particular job... ReCharge pliers would have been too bulky.

and of course, there was a refreshing beverage that needed to be opened once I finished the project. :D

also, I really need to start remembering to take pics. :facepalm:

B12 did you end up scoring some PE blades?

Also is it just me or does B12 sound like the name of a boy band?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 11, 2014, 07:33:43 PM


Oh how I miss a full size tool.


I do not even know where to start with the insults and childish jokes on this one.

Really huh, that didn't sound right.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: derekmac on December 11, 2014, 07:36:47 PM
Though not in the challenge, I did carry my Skeletool today.

(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/20141211_131036.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/20141211_131036.jpg.html)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 11, 2014, 07:39:39 PM
Digging the red Skelly DMac.

Also Monrogue is lame.  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 11, 2014, 07:41:21 PM
my CX helped me put together a craft table for my wife last night. I ended up needing a couple different hex bits from the bit kit, and discovered that the Skele plier head was the perfect size for this particular job... ReCharge pliers would have been too bulky.

and of course, there was a refreshing beverage that needed to be opened once I finished the project. :D

also, I really need to start remembering to take pics. :facepalm:

B12 did you end up scoring some PE blades?

Also is it just me or does B12 sound like the name of a boy band?

sure did. I mentioned in the other thread that I can ship one of these to you... didn't realize they were in short supply.

but not if you're gonna make boy band jokes. :twak:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on December 11, 2014, 07:44:49 PM
Digging the red Skelly DMac.

Also Monrogue is lame.  :pok:

Lol....what was that for?  To see if I was paying attention or something?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 11, 2014, 07:45:38 PM
Beautiful red Skeletool!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 11, 2014, 07:49:40 PM
Digging the red Skelly DMac.

Also Monrogue is lame.  :pok:

Lol....what was that for?  To see if I was paying attention or something?

Just showing solidarity with my fellow archnemisis DMac.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on December 11, 2014, 07:52:58 PM
Digging the red Skelly DMac.

Also Monrogue is lame.  :pok:

Lol....what was that for?  To see if I was paying attention or something?

Just showing solidarity with my fellow archnemisis DMac.

Ah, I see.  Carry on then :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 11, 2014, 07:53:14 PM
So far the skeletool is doing really well. It has not failed me yet. The pliers has seen little use so far.
I miss my dedicated folder thoug. The skeletool gets the job done, but a good folder does it better and more comfortably.
And heres a pic of the skele at work with my other EDC items.

(http://tapatalk.imageshack.com/v2/14/12/11/48ce7ca56b30b593e9373cea7fe9339d.jpg)


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Jothra on December 11, 2014, 07:55:04 PM
Off-topic: the Rebar is still going strong, but I've been far too inconsistent with my recording to make further torture testing valid. And, let's face it, torture testing is what I do.

On-topic: the Skeletool was my commercial construction tool for several months. It is surprisingly rugged. These days it has a comfortable home in my bicycle's seat bag. I may not be participating in this one, but I'll sure vouch for the tool.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 11, 2014, 07:58:24 PM
So far the skeletool is doing really well. It has not failed me yet. The pliers has seen little use so far.
I miss my dedicated folder thoug. The skeletool gets the job done, but a good folder does it better and more comfortably.


The most surprised I have been during this challenge is about how tough the Skelly is.

Short on the number of tools for sure, just the most used ones.

For example the driver on the Skelly is imo stronger then the one on the Wave. Very little to no flex when turing tough screws.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 11, 2014, 08:07:56 PM

So far the skeletool is doing really well. It has not failed me yet. The pliers has seen little use so far.
I miss my dedicated folder thoug. The skeletool gets the job done, but a good folder does it better and more comfortably.


The most surprised I have been during this challenge is about how tough the Skelly is.

Short on the number of tools for sure, just the most used ones.

For example the driver on the Skelly is imo stronger then the one on the Wave. Very little to no flex when turing tough screws.

I agree with you on that. The right in the handle mount driver bids are much more solid that any folding design.
I think the skeletool also will handle sandy conditions better, there really arent many places sand can find its way in and hamper the functionality of the tool. But you probably have better conditions for testing this than me :D



Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 11, 2014, 08:15:01 PM


So far the skeletool is doing really well. It has not failed me yet. The pliers has seen little use so far.
I miss my dedicated folder thoug. The skeletool gets the job done, but a good folder does it better and more comfortably.


The most surprised I have been during this challenge is about how tough the Skelly is.

Short on the number of tools for sure, just the most used ones.

For example the driver on the Skelly is imo stronger then the one on the Wave. Very little to no flex when turing tough screws.

I agree with you on that. The right in the handle mount driver bids are much more solid that any folding design.
I think the skeletool also will handle sandy conditions better, there really arent many places sand can find its way in and hamper the functionality of the tool. But you probably have better conditions for testing this than me :D



Sent from a device made from star dust using tapatalk

After a closer inspection I retract the sand in tool statment. There are quite a few places where sand might find a way in to hamper the blade and pliers


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 11, 2014, 08:38:02 PM
So far so good on the sand front. Did not have any issues with the Wave either though.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/1123142314.jpg~original)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 11, 2014, 09:06:29 PM
No skele work today, haven't even used the knife. Sad day for the skele.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: derekmac on December 11, 2014, 09:41:39 PM
Digging the red Skelly DMac.

Also Monrogue is lame.  :pok:

Lol....what was that for?  To see if I was paying attention or something?

Just showing solidarity with my fellow archnemisis DMac.
:salute:   and Neener neener Monrogue!!  :P

Beautiful red Skeletool!
It really is quite the looker, and is much nicer in person!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 11, 2014, 09:44:39 PM
Big day for Skele today.
Did tons of cutting. Some much that I had to sharpen it twice. Also did some screwing with it. (Hehehe)
Worked on an old auto scrubber, a light switch and put a new thermostat in a small hot water heater.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 11, 2014, 09:46:54 PM
Digging the red Skelly DMac.

Also Monrogue is lame.  :pok:

Lol....what was that for?  To see if I was paying attention or something?

Just showing solidarity with my fellow archnemisis DMac.
:salute:   and Neener neener Monrogue!!  :P

 :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 11, 2014, 09:47:00 PM
Here is a pic of the major cutting the Seke and I did. A dumpster full of cardboard.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 11, 2014, 10:03:40 PM
 :popcorn:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 11, 2014, 10:06:30 PM

Big day for Skele today.
Did tons of cutting. Some much that I had to sharpen it twice. Also did some screwing with it. (Hehehe)
Worked on an old auto scrubber, a light switch and put a new thermostat in a small hot water heater.

Hell of a day ! Thumbs up !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 11, 2014, 11:16:40 PM
Palm digger
(http://tapatalk.imageshack.com/v2/14/12/11/77e73c261ceb2d1ab79ad4cbd558a9c4.jpg)
If you keep the Philips bit in then there is no problem.
(http://forum.multitool.org/index.php?action=dlattach;topic=56389.0;attach=136185;image)
The driver is kind of s shaped so it's kind of awkward .
(http://tapatalk.imageshack.com/v2/14/12/11/ec11ad7dc5e9cf1c49788db34b5efcfe.jpg)
Keep pliers head on the driver side of handle while you screwing.
(http://forum.multitool.org/index.php?action=dlattach;topic=56389.0;attach=136187;image)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 11, 2014, 11:41:01 PM
Skeletooling for Dummies.  8)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: mrynnr on December 12, 2014, 12:11:51 AM
Mind blown! :ahhh
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 12, 2014, 12:17:10 AM

8)

I concur Kampfer ! Nicely done.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 12, 2014, 01:41:56 AM
Just pulled it out to play with  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 12, 2014, 02:57:18 AM
If you keep the Philips bit in then there is no problem.
...
Keep pliers head on the driver side of handle while you screwing.
Agreed.
Just pulled it out to play with  :facepalm:
Well when you're done doing that you could try out Kampfer's suggestions on how to handle the Skeletool.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on December 12, 2014, 03:29:20 AM
Big day for the Skeletool...opened a box of diapers, and that's it :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 12, 2014, 03:32:39 AM
Nice! Those boxes have some great glue. :rant:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 12, 2014, 04:45:44 AM
Skeletooling for Dummies.  8)

You should consider adding the leave the extension in trick for pliers use Kampfer.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: NKlamerus on December 12, 2014, 05:07:22 AM
Do any of yall have trouble opening the blade with one hand? The hole just isn't big enough for my thumb.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 12, 2014, 08:20:42 AM
Do any of yall have trouble opening the blade with one hand? The hole just isn't big enough for my thumb.

On the Skelle, I had a little difficulty, but on the MUT it is easy and the blade action is a smooth as silk, even for a lefty.  ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 12, 2014, 08:26:01 AM
G'Day,

Day 12 with the MUT.

Not a lot of action today.

Lunch duties as always, and some bubble wrap cutting at home. Now that was fun, I could not keep a straight line at all  :D. I wrapped some motorcycle fog lights and wiring as well as 2 HID kits. The duck-tape did not stand a chance and there was no glue residue on the knife. I may have to touch the blade up over the weekend if I get a chance.

Have a good weekend all

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 12, 2014, 08:36:40 AM
Do any of yall have trouble opening the blade with one hand? The hole just isn't big enough for my thumb.

No issues with opening or the size of the hole but my Skelly blade is tight. Tried oil with no luck but have not messed with the pivot screw.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 12, 2014, 11:23:40 AM
Some days it is hard to believe that I get paid for this. Today was one of them.

Range day.

Skelly busting a pre range pose.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1124140958a.jpg~original)

Helping open some ammo crates.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1124141006.jpg~original)

Adjusting a sight for one of my Soldiers.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1124141052a.jpg~original)

Skelly also helped clear a weapon jam but no pics of that because everyone was waiting.

All in all a good day.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 12, 2014, 02:30:01 PM

Some days it is hard to believe that I get paid for this. Today was one of them.

Range day.

Skelly busting a pre range pose.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1124140958a.jpg~original)

Helping open some ammo crates.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1124141006.jpg~original)

Adjusting a sight for one of my Soldiers.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1124141052a.jpg~original)

Skelly also helped clear a weapon jam but no pics of that because everyone was waiting.

All in all a good day.

Sweet !



Sak's  rule !



Title: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 12, 2014, 02:34:29 PM
Skele helped securing a tarp,  cutting paracord.  That was fun at 3:00 am. Couple of hours of black ops 2 an off to work.


Sak's  rule !
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 12, 2014, 05:35:04 PM
HGuy, question for you.
Not sure what role you play at the front over there, but did the shining Skele ever become a problem on battlefield? Comparing to other BO tools.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 12, 2014, 05:45:54 PM
Used the Skele to open a few packages, feather some firewood, open a can (i tried to use the bottle opener, but it was to thick to penetrate the lid) and open a few bottles of xmas soda.


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 12, 2014, 05:47:45 PM
Quote from: Leatherman
After our pliers are assembled, we run a cutting test on them. Do you think they passed?
(https://scontent-2.2914.fna.fbcdn.net/hphotos-xpf1/v/t1.0-9/1378576_813994465306390_4341722434426556769_n.jpg?oh=27cfe5d8a2bae554b150c64e59107259&oe=54FFD890)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 12, 2014, 06:21:29 PM

Quote from: Leatherman
(https://scontent-2.2914.fna.fbcdn.net/hphotos-xfp1/v/t1.0-9/1512286_812268935478943_8623208314432212573_n.jpg?oh=eded51f3d3c844896a50a38c57cf8853&oe=5545C2E9)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 12, 2014, 08:21:26 PM

Quote from: Leatherman
(https://scontent-2.2914.fna.fbcdn.net/hphotos-xfp1/v/t1.0-9/1512286_812268935478943_8623208314432212573_n.jpg?oh=eded51f3d3c844896a50a38c57cf8853&oe=5545C2E9)

 :drool: :drool: :drool:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: muddog15 on December 12, 2014, 09:19:19 PM
Well I'm not sure if this is going to count but here goes.  I have replaced 4 12 volt batteries in my all terrain mobility scooter,  I have pulled the fish hook out of a fish mouth,  I am taking off a broken handle from a rake and replacing the handle. All with just my Skeletool so far this month. I think that's it so far.

Sent from my SM-N910P using Tapatalk

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 12, 2014, 09:45:54 PM
Really missing the can opener on my Surge right about now.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 12, 2014, 11:24:01 PM

Really missing the can opener on my Surge right about now.

Have tried the carabiner, I saw something about using it as a opener.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 12, 2014, 11:33:04 PM
Yeah forget it, I tried its a fail !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 12, 2014, 11:33:37 PM

Really missing the can opener on my Surge right about now.

Have tried the carabiner, I saw something about using it as a opener.


Sak's  rule !
Yea, with a iron fist. I saw that video a while back.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 13, 2014, 01:32:19 AM
Skele helped me to work on "Single Kick" today.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 13, 2014, 01:35:17 AM
Yeah forget it, I tried its a fail !


Sak's  rule !
Same, no luck. Ended up using the blade.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 13, 2014, 02:10:24 AM

Skele helped me to work on "Single Kick" today.

Cannibal !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 13, 2014, 02:54:08 AM
Just a thought, can you install sidekicks blade on Skele?
If that is possible then would be a good alternative for those want PE blade but don't want to pay CX price.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 13, 2014, 03:03:59 AM
HGuy, question for you.
Not sure what role you play at the front over there, but did the shining Skele ever become a problem on battlefield? Comparing to other BO tools.

No not at all.

Could not think of a situation where I would be using a MT and need to be sneeky. Not to mention a lot of our weapons are so old and worn they are more shiny then a Skelly.

Not much sneaking about with US Army tactics. More of a in your face do something about it mindset.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 13, 2014, 03:04:44 AM
Don't think it gonna be a straight swap.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 13, 2014, 03:07:32 AM
I never a fan of those black bayonets and combat knives, I belevie a shiny blade would put fear in my emenies, then half of the battle is won.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 13, 2014, 03:10:31 AM
Don't think it gonna be a straight swap.
Same length but thinner, about the same shape. Someone please try and report back, I done my share of modding today.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 13, 2014, 03:13:46 AM
I never a fan of those black bayonets and combat knives, I believe a shiny blade would put fear in my emenies, then half of the battle is won.

My plan is to avoid being in a situation where the Skelly is my last hope in a fight.  :pok:

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 13, 2014, 03:45:07 AM
Christmas party toy removal duty
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on December 13, 2014, 03:47:05 AM
Used my Skele to repair my fireplace pilot.  Pulled pins and undid screws to get into the mechanism.  Used the flat driver to scrape off some buildup.  Nice to have a fireplace again, even if it is gas.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 13, 2014, 08:30:21 AM
G'Day,

Day 13 of the Challenge.

Today was lots of work for the MUT. I replace some power plugs that were pretty dodgy and fused / melted together. According to the electrician (sparky in our land  :D) this was an electric fire waiting to happen. The longer bits came in very handy to undo and then redo the tiny plug screws. I had to cut 3 times to get through the electrical cord. I noticed afterwards that the plier-head tightened up a little similar to the issues we had with some Rebars. I have also noticed that the retaining bit of metal for the bit holder is not in the center any longer. I'm not sure if this is due to recent use or if it always was like that. I might just pop into Leatherman in Sydney for a quick look over.

The second task was to remove a whole lot of P-clamps and an extension cord that was attached to a dry wall. I must admit a proper screw driver would have been a little more comfortable, however the MUT did it with ease. It does not feel natural at all undoing screws with a tool 1/2 open.

Some wear along the blade, the plier-head and the bits, but all in all the MUT is still pretty black. The pouch is keeping well and no stitching has come undone.

Some more stuff to do in the afternoon tomorrow once I get back from work.

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 13, 2014, 10:37:49 AM
Skele did a lot of screwing today, taking apart and putting back together my sidekicks at least fifteen times.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 13, 2014, 12:16:19 PM
Today someone needed a knife so I threw my Skeletool quite a distance to them. I didn't realise at the time but the flat bit fell out and is now lost in the grass. I should have known that would happen.  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 13, 2014, 02:45:40 PM
Today someone needed a knife so I threw my Skeletool quite a distance to them. I didn't realise at the time but the flat bit fell out and is now lost in the grass. I should have known that would happen.  :facepalm:

Not the first person I have heard say something like this.

No way it would happen on my Skelly because it is to tight in the holder region not to mention when the tool is closed it is closed.

Is your Skeletool older and maybe a lot more broke in?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 13, 2014, 08:55:16 PM
No, mine was tight too. But when you throw the thing 30 metres and it opens up on impact and spins around for another few metres this sorta smurf is bound to happen.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 13, 2014, 09:04:12 PM
No, mine was tight too. But when you throw the thing 30 metres and it opens up on impact and spins around for another few metres this sorta smurf is bound to happen.
What do you expert? We want to see photo of the damages.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 13, 2014, 09:15:40 PM
No damage at all - just a missing bit.  :(
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 13, 2014, 09:29:27 PM
No damage at all - just a missing bit.  :(
Then photos to prove there are no damages!  :twak:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 14, 2014, 01:46:26 AM
Did I use it right
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 14, 2014, 04:37:47 AM
Did I use it right

If it is open?

Then yes. yes you did.  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 14, 2014, 07:05:10 AM
Don't think it gonna be a straight swap.
Same length but thinner, about the same shape. Someone please try and report back, I done my share of modding today.
That would be awesome if it works. Faux cx doesn't sound too bad
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 14, 2014, 09:07:33 AM
G'Day,

Another day with the Mighty MUT.

None of the planned work happened today. I ended up cutting up some lunch and having a show and tell in out meal room. I got a few strange looks when I told them about the challenge. Some people just don't understand...  :D

I'm taking the MUT into Leatherman tomorrow afternoon to have a look at the tight plier head and the skew bit holder. I oiled it and worked the oil in pretty well, but it is still pretty tight. While I'm there my BO Surge will also need a look at. The wire cutters are biting into each other, and I have never used them to cut anything. It seems like the BO tools needs a little more time to break in. Both sides of the cutters are now shiny.

So far the challenge is going well for me. There have been times that I would have loved to have the extra tools the Wave has especially a scissors and file, but I'm slowly getting used to using the MUT all the time. I may have to evaluate my EDC strategy to accommodate the MUT. I have also realized that the leather pouch I made is a little soft around the belt tab. I'm thinking of stitching two pieces of leather together for added rigidness.

Well, that is the end of the weekend's work, back to driving trains this week.  :D

Cheers,

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 14, 2014, 09:32:09 AM
Cheer Pete!  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 14, 2014, 09:34:05 AM

I got a few strange looks when I told them about the challenge. Some people just don't understand...  :D

....back to riding trains this week.  :D


I have Soldiers here giving me funny looks to. Also have some Soldiers coming to me and asking if I want to use the Skelly on stuff and take pictures lol.

Also I fixed the last bit for you.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: sir_mike on December 14, 2014, 07:48:35 PM
Is that a problem with the bit either in the holder or spare getting loose enough to just fall out?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 14, 2014, 07:53:53 PM
Is that a problem with the bit either in the holder or spare getting loose enough to just fall out?
I had heard reports of it, but that never happen to me.
Things could get a lot worst when you launch the thing 30 meters away.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: sir_mike on December 14, 2014, 08:48:00 PM
Is that a problem with the bit either in the holder or spare getting loose enough to just fall out?
I had heard reports of it, but that never happen to me.
Things could get a lot worst when you launch the thing 30 meters away.

So much for the destructive test!  LOL

I might have one on its way, the CX version so hopefully by the end of this week it will be here.  Cant wait to check it out and hope I like it!  :)


Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 14, 2014, 09:42:57 PM
Cool, too late to join this challenge but you are welcome to be part of our discussion.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 14, 2014, 11:37:04 PM
Cat duty today
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: sir_mike on December 14, 2014, 11:41:33 PM
Cool, too late to join this challenge but you are welcome to be part of our discussion.

Me and challenges would be good.  My stuff sees very little use but I will hang out in the thread and discuss if I have anything to add!  :)

I might learn some different uses for this tool even with how basic it seems!  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 15, 2014, 12:17:54 AM
Used Skelly as a ice pick at a party
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 15, 2014, 02:52:24 AM
Cat duty today

How did you get the cat to stand still for the picture?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 15, 2014, 08:33:35 AM
Installed batteries on some kids toys, that is it for the day.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 15, 2014, 08:52:53 AM

I got a few strange looks when I told them about the challenge. Some people just don't understand...  :D

....back to riding trains this week.  :D

Also I fixed the last bit for you.


Thanks for that Mate!, It was late and little errors like that does creep in.  :D


I have Soldiers here giving me funny looks to. Also have some Soldiers coming to me and asking if I want to use the Skelly on stuff and take pictures lol.


At least your soldiers can appreciate a good tool and are allowed to wear it. Here, wearing a Multi is OK if work requires it, Or if you are in uniform. I can say "Yes" to both (most of the time), else no-go. And the fact that I carry a MUT as a Multi, does not always help.

I like the MUT the more I use it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 15, 2014, 08:54:32 AM
Cat duty today

How did you get the cat to stand still for the picture?

Wondered this myself, now that I'm in my 1/2 jean pant  :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 15, 2014, 09:04:48 AM
G'day,

A very busy day for me and the MUT.

I posted previously that the MUT's pliers tightened up after I cut some electrical cord on Saturday. The small bit holder was also a little bent off center due to heavy un-screwing.

I paid a visit to our local Leatherman AD and once again came away a VERY happy customer. I am now the proud owner of a brand new MUT as well as a new Surge. Both tools were replaced under warranty, both for issues with the pliers. I want to say a BIG THANK YOU to Zen and the technical staff there for the commitment to exceptional customer service. This means I had no down time without the Mighty MUT.

The old MUT did some lunch duties today, not much more. The new MUT has only been cleaned and packed away for tomorrows use. I will take some pictures of both tools tomorrow during the day when the light is better.

On a side note, and humor me for just one paragraph please. I do like the new improved Surge. I will have some playtime over the weekend as I can only start using the tool in the new year.  ;)

Well, that's all for today.

Enjoy the evening,

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 15, 2014, 09:07:14 AM
Cat duty today

How did you get the cat to stand still for the picture?

Wondered this myself, now that I'm in my 1/2 jean pant  :facepalm:

Sigh
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 15, 2014, 09:12:20 AM
Glad they took care of you :tu: but

 :worthless:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 15, 2014, 09:45:09 AM
For Kampfer, and others  :D

The Pics

Enjoy, Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 15, 2014, 04:12:57 PM
A little bury this morning with the skeletool. Had a waterline leak. No biggie. Just cut up some wet ceiling tile.
Then it got a bath and got some air during break.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 15, 2014, 04:25:38 PM

A little bury this morning with the skeletool. Had a waterline leak. No biggie. Just cut up some wet ceiling tile.
Then it got a bath and got some air during break.

Power bath !


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 15, 2014, 05:31:21 PM
First SAK photo bomb!

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/5074e249-0085-4523-80d7-85fd97f0cba4.jpg~original)

Related to the challenge in that I used the Skelly to open the case of C-4 that I got the two blocks out of for the picture.

Then we blew some smurf up!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 15, 2014, 06:22:28 PM
Half way through the challenge, how is everyone's Skelly holding up?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 15, 2014, 06:48:04 PM
Half way already?

I am sure this was your point but the Skeletool is not much of a challenge. Has most of the stuff we really need for day to day carry tasks.

Very pleased with how well the Skelly is holding up. Been working mine pretty hard since about a week before the challenge started and if this was Ebay and I still had the box I could post it as NIB. Maybe like new condition. Only real wear is some of the BO finish coming off the bits. Impressive.

Pivots are still tight as the day I got the tool. Which I suppose is a good thing but if it has not loosened up a little by the time my CT 41 gets here I am going to mess with the pivots. Granted I will mess something up while I am at it one can not blame the Skeletool for that.

Here is a picture I took just now showing Skeletors hump day condition.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Knives%202/1127142159.jpg~original)
Title: Official 31-Day SKELETOOL* Challenge!
Post by: Weasel on December 15, 2014, 07:53:49 PM
I would have been in on this challenge  if I'd have got my mut earlier
But was holding off because of a stern warning from my partner.anyway couldn't resist ,mut arrived today, had my telling off but I tell you what it was worth every bad word from her .The Mut is fantastic .
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 15, 2014, 08:02:05 PM
I find it a little small, wish it had a saw, think I'll go for a mut.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 15, 2014, 08:05:45 PM

I would have been in on this challenge  if I'd have got my mut earlier
But was holding off because of a stern warning from my partner.anyway couldn't resist ,mut arrived today, had my telling off but I tell you what it was worth every bad word from her .The Mut is fantastic .
I've been there done that. Wife gets pissed for a day but the MT lasts a lifetime.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Weasel on December 15, 2014, 08:09:45 PM
That's exactly how I see it. She says I'm a strange little man but I can live with that
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 15, 2014, 08:10:05 PM

I would have been in on this challenge  if I'd have got my mut earlier
But was holding off because of a stern warning from my partner.anyway couldn't resist ,mut arrived today, had my telling off but I tell you what it was worth every bad word from her .The Mut is fantastic .
I've been there done that. Wife gets pissed for a day but the MT lasts a lifetime.

Not to mention I give more then even odds I am going to piss her off about something else anyway so I might as well get a MT.

At least I have something to show for the upset wife.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 15, 2014, 08:30:14 PM
I have it bad!
Bought 2x skellys already and now looking for the best complimentary multitool to it.
Surge seems the winner as it uses the same bits and wont fight for pocket time, its the car/backpack tool while skelly is in the pocket.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: sir_mike on December 15, 2014, 08:54:35 PM
I have it bad!
Bought 2x skellys already and now looking for the best complimentary multitool to it.
Surge seems the winner as it uses the same bits and wont fight for pocket time, its the car/backpack tool while skelly is in the pocket.

You could also go with the Rebar and get the bit holder, then use the same bits! :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 15, 2014, 10:49:29 PM
Light cutting and opening

Needed some cove base adhesive able to  scrounge  some out of a old tube.

(http://tapatalk.imageshack.com/v2/14/12/15/f501f1db7e411c344eed529f9105da09.jpg)

Caulked some tubs

(http://tapatalk.imageshack.com/v2/14/12/15/82ea8c9ca26dbccbebdd30fb2658b194.jpg)

And some paint

(http://tapatalk.imageshack.com/v2/14/12/15/2de825b8e9ae0c6db7210f2549ca4eb1.jpg)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on December 15, 2014, 11:05:38 PM
Was just browsing this thread, and Kampfer almost asked the question I had in mind, so I tweaked it a bit ....

Half way through the challenge, how is everyone's sanity holding up?

 :D :D :D

Anyone dropped out yet? Or are people getting by by carrying additional tools to pick up on what the Skele can't do?
Title: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 15, 2014, 11:54:27 PM
I have to use dedicated tools a lot more during this challenge. A ST or wave could handle most.


Sak's  rule !
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 01:04:08 AM
I have it bad!
Bought 2x skellys already and now looking for the best complimentary multitool to it.
Surge seems the winner as it uses the same bits and wont fight for pocket time, its the car/backpack tool while skelly is in the pocket.
My hacked Micra team up with Skelly real nice and with not much overlap.
(http://forum.multitool.org/index.php?action=dlattach;topic=55311.0;attach=132487;image)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 01:07:04 AM
I have to use dedicated tools a lot more during this challenge. A ST or wave could handle must.
Skelly is not designed to offer a lot of tools, rather it intent to cover the most frequently needed tasks and do them very well.
And ease of carry is also a important factor, because not everyone is into sheath carry a 8 oz MT on his belt. The best MT in world wont do you any good if you dont carry it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 16, 2014, 01:51:07 AM

I have to use dedicated tools a lot more during this challenge. A ST or wave could handle must.
Skelly is not designed to offer a lot of tools, rather it intent to cover the most frequently needed tasks and do them very well.
And ease of carry is also a important factor, because not everyone is into sheath carry a 8 oz MT on his belt. The best MT in world wont do you any good if you dont carry it.

Totally agree and it is solid for what it is ! I think it's a great urban or light carry edc but not my first choice for my work environment. That being said I really have no complaints about the skele.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 16, 2014, 02:39:39 AM
Plug removal
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 16, 2014, 03:01:12 AM

I have to use dedicated tools a lot more during this challenge. A ST or wave could handle must.
Skelly is not designed to offer a lot of tools, rather it intent to cover the most frequently needed tasks and do them very well.
And ease of carry is also a important factor, because not everyone is into sheath carry a 8 oz MT on his belt. The best MT in world wont do you any good if you dont carry it.

Totally agree and it is solid for what it is ! I think it's a great urban or light carry edc but not my first choice for my work environment. That being said I really have no complaints about the skele.


Sak's  rule !
Right here. I agree 100% it does have me thinking about a Mut. The Mut has never even crossed my mind til this challenge.
I am really missing the saw, file, can opener and a beefy set of wire cutters/pliers. And my folder or fixed blade.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 04:12:04 AM
Not a tool meant for professionals, but for average joe, it is petty good.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 16, 2014, 04:16:03 AM
On the subject of complimentary tool I lean to the Micra or a SAK.

The Skeletool is a light duty tool so if I am expecting hard work something else would get the nod. Looking at you Surge/Wave. With that said the light duty bits missing from the Skelly imo are Scissors and a Saw/File. Both of which you can find on a SAK.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 04:20:50 AM
Agree, get with a SAK (with saw) if going outdoor, Micra for urban carry.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 16, 2014, 04:45:42 AM
Agree, get with a SAK (with saw) if going outdoor, Micra for urban carry.

Gave me an idea for a custom SAK.

Like a Skeletool sidekick model with just a saw, file and scissors.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 05:39:38 AM
For whatever functions Skelly has to offer, I don't think any SAK can do better.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 16, 2014, 06:45:21 AM
For whatever functions Skelly has to offer, I don't think any SAK can do better.

Yeah that is why I was saying have a SAK with the parts the Skelly does not.  :twak:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 16, 2014, 09:43:36 AM
Right here. I agree 100% it does have me thinking about a Mut. The Mut has never even crossed my mind til this challenge.
I am really missing the saw, file, can opener and a beefy set of wire cutters/pliers. And my folder or fixed blade.

The MUT is a fine tool. It holds up to the challenge here, however it comes with a hefty weight disadvantage over the Skelle. I am on my second replacement MUT. The first one had a hairline crack one of the plier tension bits. That left the one side a little "floppy" with very little resistance in the open position. MY second MUT developed a binding pliers after cutting some electrical core over the weekend. That was replaced yesterday by the kind folk at Zen Imports, Leatherman's AD in Australia. So far this one is holding up just fine. I will put it through some hard work over the weekend.

I would prefer a file to a Saw, in saying that the saw is pretty awesome. The blade is in my opinion the best combo blade that Leatherman offers on any of their tools. And, it is the best looking tool of them all.  ;)

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 16, 2014, 09:45:43 AM
G'Day,

Day 16 with the MUT.

Still new and leaving some black on my hands.  :D I did not have time yesterday to clean it all up. Today the tool was used for some lunch duties and that was it.

Cheers,

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 16, 2014, 09:49:23 AM
I find it a little small, wish it had a saw, think I'll go for a mut.


Sak's  rule !

You know you do!!! Strong enough to hold a Surge up  :D

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 16, 2014, 09:55:20 AM
Was just browsing this thread, and Kampfer almost asked the question I had in mind, so I tweaked it a bit ....

Half way through the challenge, how is everyone's sanity holding up?

That was probably questionable ever before we started the challenge...  :facepalm:

I love the challenge. The temptation is there to use my new Surge, but it has to wait. The expression on my son's face when I told him he can use the Surge for a bit was priceless.

I am surprised how the Skelle's are holding up. They have proven themselves time and again during the last two weeks. I hope Leatherman is following this thread, this is real world testing gentleman!

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 10:04:40 AM
Mut weights between st300 & surge, correct?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 16, 2014, 11:20:12 AM
Mut weights between st300 & surge, correct?

Yep but closer to the Surge, like just over an ounce lighter then the Surge.

IMO a lot of weight for what you get. Although I am a noob so what do I know?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 16, 2014, 02:07:34 PM

Mut weights between st300 & surge, correct?

Yep but closer to the Surge, like just over an ounce lighter then the Surge.

IMO a lot of weight for what you get. Although I am a noob so what do I know?

After awhile it doesn't matter, I just want a new MT  " I was going to say tool but knew you would run with that one " to play with.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 16, 2014, 02:13:12 PM

Mut weights between st300 & surge, correct?

Yep but closer to the Surge, like just over an ounce lighter then the Surge.

IMO a lot of weight for what you get. Although I am a noob so what do I know?

After awhile it doesn't matter, I just want a new MT  " I was going to say tool but knew you would run with that one " to play with.


Sak's  rule !

I know right? That Kampfer can be so childish sometimes.

Good thing you got me here to keep him and Monrogue in line.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 16, 2014, 03:29:59 PM

I find it a little small, wish it had a saw, think I'll go for a mut.


Sak's  rule !

You know you do!!! Strong enough to hold a Surge up  :D

Sweet ! I'm convinced.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 16, 2014, 03:33:14 PM


Mut weights between st300 & surge, correct?

Yep but closer to the Surge, like just over an ounce lighter then the Surge.

IMO a lot of weight for what you get. Although I am a noob so what do I know?

After awhile it doesn't matter, I just want a new MT  " I was going to say tool but knew you would run with that one " to play with.


Sak's  rule !

I know right? That Kampfer can be so childish sometimes.

Good thing you got me here to keep him and Monrogue in line.

I know,  can you believe that guy. Geeez


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 16, 2014, 03:37:44 PM
Day 16 touch up first thing

(http://tapatalk.imageshack.com/v2/14/12/16/2869f07f09cda5fc79a43ae8f2abb39e.jpg)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 16, 2014, 03:43:26 PM
Cool pic!
I have been having to touch up my about every other day. One day I had to sharpen it twice.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 16, 2014, 04:15:48 PM

Cool pic!
I have been having to touch up my about every other day. One day I had to sharpen it twice.

Yeah I hear ya, I carry a little smith sharpener in my GHB for a quick touch up.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 05:32:46 PM

Mut weights between st300 & surge, correct?

Yep but closer to the Surge, like just over an ounce lighter then the Surge.

IMO a lot of weight for what you get. Although I am a noob so what do I know?

After awhile it doesn't matter, I just want a new MT  " I was going to say tool but knew you would run with that one " to play with.


Sak's  rule !

I know right? That Kampfer can be so childish sometimes.

Good thing you got me here to keep him and Monrogue in line.
:megaslap:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 05:54:41 PM
Was just browsing this thread, and Kampfer almost asked the question I had in mind, so I tweaked it a bit ....

Half way through the challenge, how is everyone's sanity holding up?

 :D :D :D

Anyone dropped out yet? Or are people getting by by carrying additional tools to pick up on what the Skele can't do?
A couple occasions I would benefit from having scissors, but I got by using a knife,
But I ain't brave enough to trim my finger nails with it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 16, 2014, 05:58:57 PM
You got 10 chances to figure it out.;D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 06:00:23 PM
 :rofl:
You got 10 chances to figure it out.;D
Title: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 16, 2014, 06:08:59 PM
Skele duties

(http://tapatalk.imageshack.com/v2/14/12/16/e996da11b6f4ae4f4697861aa581f737.jpg)

(http://tapatalk.imageshack.com/v2/14/12/16/cca892126db71a90103358ab6ac531e5.jpg)

(http://tapatalk.imageshack.com/v2/14/12/16/280d8392e5958b7ab3420372dcf6285c.jpg)
 


Sak's  rule !
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 16, 2014, 07:05:25 PM
Was just browsing this thread, and Kampfer almost asked the question I had in mind, so I tweaked it a bit ....

Half way through the challenge, how is everyone's sanity holding up?

 :D :D :D

Anyone dropped out yet? Or are people getting by by carrying additional tools to pick up on what the Skele can't do?
A couple occasions I would benefit from having scissors, but I got by using a knife,
But I ain't brave enough to trim my finger nails with it.

if the blade is sharp enough, it will work. :whistle:

just make sure to go nice and slow. :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 16, 2014, 07:18:04 PM
out of curiosity, what are people finding to be the most used tools on their Skeletool? for me, the list looks like this:

1. blade
2. bit driver
3. bottle opener
4. pliers/wire cutters

this doesn't really surprise me... if I carried a different MT for a month, I think the list would be pretty much the same. although the opener might drop down on the list; I'm not a big fan of using the LM can/bottle opener to open bottles, but it gets the job done.

the opener on the Skele, on the other hand, is just so convenient and easy to use... :D  :drink:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 16, 2014, 07:31:16 PM
1) driver

2) blade

3) pliers

Have not used the bottle opener or clip.



Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 07:59:55 PM
Amazing little tool, it still looks brand new after three months EDC.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 08:03:30 PM
1. blade (Most comfortable grip in knife mode comparing to all other MTs)
2. bit driver (Very versatile)
3. bottle opener (Best in MT world)
4. pliers/wire cutters (Light duty)
Same list for me.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 16, 2014, 08:10:47 PM
Blade and bit driver in that order.

Used the pliers once or twice.

No bottles here and that makes me a sad panda.  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 16, 2014, 09:24:31 PM
1.blade
2.bit driver
3.bottleopener
4.pliers


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: sir_mike on December 16, 2014, 09:50:20 PM
Amazing little tool, it still looks brand new after three months EDC.

Did you take the 154cm blade and put it in the stainless skeletool?  Looks like it according to the pic.  :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 10:19:05 PM
Amazing little tool, it still looks brand new after three months EDC.

Did you take the 154cm blade and put it in the stainless skeletool?  Looks like it according to the pic.  :)
Yes I did.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: sir_mike on December 16, 2014, 10:34:55 PM
Amazing little tool, it still looks brand new after three months EDC.

Did you take the 154cm blade and put it in the stainless skeletool?  Looks like it according to the pic.  :)
Yes I did.

Didnt like the Carbon Fiber feel or just liked the stainless look better?  So now you have a CX with a combo blade?  If so, any use during this challenge?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 10:40:19 PM
Amazing little tool, it still looks brand new after three months EDC.

Did you take the 154cm blade and put it in the stainless skeletool?  Looks like it according to the pic.  :)
Yes I did.

Didnt like the Carbon Fiber feel or just liked the stainless look better?  So now you have a CX with a combo blade?  If so, any use during this challenge?
I just like the look of stainless steel on all my MTs. I gifted that CX to a friend.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 16, 2014, 10:43:31 PM
I hope Leatherman is following this thread, this is real world testing gentleman!
I know someone who is watching us closely. ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: sir_mike on December 16, 2014, 11:44:13 PM
Amazing little tool, it still looks brand new after three months EDC.

Did you take the 154cm blade and put it in the stainless skeletool?  Looks like it according to the pic.  :)
Yes I did.

Didnt like the Carbon Fiber feel or just liked the stainless look better?  So now you have a CX with a combo blade?  If so, any use during this challenge?
I just like the look of stainless steel on all my MTs. I gifted that CX to a friend.

I do too like the stainless look the best and that smurfs that one cant get the stainless with a full plain edge!  I even asked Leatherman! :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 17, 2014, 12:46:24 AM

I hope Leatherman is following this thread, this is real world testing gentleman!
I know someone who is watching us closely. ;)

I hope so, I'm starting to get withdrawals .

(http://tapatalk.imageshack.com/v2/14/12/16/65d16d13b94b2cf5ce7fd64b1184a39c.jpg)


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 17, 2014, 02:19:29 AM

I hope Leatherman is following this thread, this is real world testing gentleman!
I know someone who is watching us closely. ;)

I hope so, I'm starting to get withdrawals .

(http://tapatalk.imageshack.com/v2/14/12/16/65d16d13b94b2cf5ce7fd64b1184a39c.jpg)


Sak's  rule !
Me too. I am missing my Surge and SOG Vulcan.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 17, 2014, 02:22:44 AM
Before I forget, I do not want in the giveaway. I am just here for the challenge.
Also just wanted to say thanks for doing this Kampfer.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 17, 2014, 02:55:02 AM
Before I forget, I do not want in the giveaway. I am just here for the challenge.
Also just wanted to say thanks for doing this Kampfer.
The only way you can be out of the giveaway is you drop out. >:D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 17, 2014, 02:58:52 AM
Game opining time for the kids
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 17, 2014, 02:59:13 AM
Before I forget, I do not want in the giveaway. I am just here for the challenge.
Also just wanted to say thanks for doing this Kampfer.
The only way you can be out of the giveaway is you drop out. >:D

Hmm.

I do have a number of SAKs and MTs I want to try out now that mail is working here.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 17, 2014, 03:37:34 AM

Before I forget, I do not want in the giveaway. I am just here for the challenge.
Also just wanted to say thanks for doing this Kampfer.

Yeah me too, just to see if I can make it.


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 17, 2014, 08:35:34 AM
I hope Leatherman is following this thread, this is real world testing gentleman!
I know someone who is watching us closely. ;)

That is good to know...
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 17, 2014, 08:50:27 AM
G'Day,

Another quiet day for the MUT. The new baby has had very little use, but that will change tomorrow. My new motorcycle is arriving and I have a few farkles to add before a good run-in day on Friday. Somehow the next 24hrs will drag slowly. An early shift tomorrow preparing a train for service might also require some MUT use.

My tool usage on the MUT is as follows:
1. Blade
2. Saw
3. Pliers
4. Show and Tell  ;)
5. Bit driver
6. Opener (once only)
7. Bronze scraper

Missed tools I needed since the challenge started:
1. Scissors
2. File
3. Dedicated Philips screwdriver - for dismantling our old garden trellis.

Being a specialized tool, it requires a little more innovation for tool usage. The scraper is handy for poking, eating small bite-size bits; and cleaning nails - with a good wash afterwards. I must admit, I don't have the courage to cut any nails with the blade. It will slice through the rest of the finger without to much trouble.  :o

Enjoy the evening,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 17, 2014, 05:56:41 PM
1. blade (Most comfortable grip in knife mode comparing to all other MTs)
2. bit driver (Very versatile)
3. bottle opener (Best in MT world)
4. pliers/wire cutters (Light duty)
Same list for me.

I completely agree with all the comments you added, Kampfer. :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Higgins617 on December 17, 2014, 05:58:43 PM
You crazies aren't done yet?!? We should just rename this thread the loony bin.... :whistle: :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 17, 2014, 07:02:05 PM
Before I forget, I do not want in the giveaway. I am just here for the challenge.
Also just wanted to say thanks for doing this Kampfer.
The only way you can be out of the giveaway is you drop out. >:D
Alright.
Breezy gave me a good idea, and it is a lot better than my idea. If I do happen to win, give my prize to Getahl. I am sure he could use a pick me up.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 17, 2014, 07:46:41 PM
Before I forget, I do not want in the giveaway. I am just here for the challenge.
Also just wanted to say thanks for doing this Kampfer.
The only way you can be out of the giveaway is you drop out. >:D
Alright.
Breezy gave me a good idea, and it is a lot better than my idea. If I do happen to win, give my prize to Getahl. I am sure he could use a pick me up.
it was supposed to be a surprise. :twak:

but now that the cat's out of the bag, that's what I would like to do if I happen to win the prize at the end of the challenge. :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 17, 2014, 08:43:51 PM
Oh smurf! Sorry man.
I guess I screwed the pooch on that one.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 17, 2014, 09:10:40 PM
Meetings today so the style CS got the call.

(http://tapatalk.imageshack.com/v2/14/12/17/3db01860f6e785bba4b2a17418577943.jpg)

BTW is it okay to switch tools ?


Sak's  rule !



Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 17, 2014, 09:35:02 PM
Oh smurf! Sorry man.
I guess I screwed the pooch on that one.

no worries. :cheers:

as long as Kampfer doesn't mind, it sounds like we're good to go. :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 17, 2014, 09:41:45 PM
Meetings today so the style CS got the call.

(http://tapatalk.imageshack.com/v2/14/12/17/3db01860f6e785bba4b2a17418577943.jpg)

BTW is it okay to switch tools ?


Sak's  rule !
Only if you have to.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 17, 2014, 09:42:38 PM
Oh smurf! Sorry man.
I guess I screwed the pooch on that one.

no worries. :cheers:

as long as Kampfer doesn't mind, it sounds like we're good to go. :salute:
If you won the price, you do what pleases you.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 17, 2014, 10:29:19 PM
Have to use Alox Farmer's awl to do some modding on Sidekick Lite.  :-[
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 17, 2014, 10:37:24 PM
Have to use Alox Farmer's awl to do some modding on Sidekick Lite.  :-[

I'll allow it.  :tu:
Title: Official 31-Day SKELETOOL* Challenge!
Post by: colt 1911 on December 17, 2014, 10:42:30 PM
Opened a snack

(http://tapatalk.imageshack.com/v2/14/12/17/e01482905fef772eb123ca959f026d8e.jpg)


Sak's  rule !
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 18, 2014, 12:49:34 AM
Pocket weight duty today
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 18, 2014, 10:50:00 AM
G'Day,

Busy day here today. Not much to do for the MUT except lunch duties.

I got a new motorcycle and did a few things on it. Sadly no scissors on the MUT and I did not have a big enough TORX bit in the bit kit. Thus dedicated tools it was. I removed the OEM GPS bracket as I will add my own one over the weekend.

I'll take some decent pictures of the MUT on bike and add them over the weekend. First ride today, and I was stoked. A big day planned tomorrow, MUT in the pouch.

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 18, 2014, 11:32:05 AM
Rare pocket ride day for my Skelly also.

Have a range coming up on Sunday so should see some work there. Skelly did get to make fun of LLST a little bit so that was nice.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 18, 2014, 06:17:27 PM
I coach my older son's soccer team, and we had our end-of-season pizza party last night. I had gotten some stickers and soccer ball keychains for all the boys. since they're a bunch of 7 and 8 year old boys, the soccer balls were being thrown, bounced, etc., and a couple guys got upset when the ball broke off of the keychain. luckily, my Skelly was able to bend the attachment point back into place, and all tears were avoided. :tu: not to mention a couple of the other dads noticed the Skelly and were impressed enough to start asking questions about it... ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 18, 2014, 07:45:51 PM
I coach my older son's soccer team, and we had our end-of-season pizza party last night. I had gotten some stickers and soccer ball keychains for all the boys. since they're a bunch of 7 and 8 year old boys, the soccer balls were being thrown, bounced, etc., and a couple guys got upset when the ball broke off of the keychain. luckily, my Skelly was able to bend the attachment point back into place, and all tears were avoided. :tu: not to mention a couple of the other dads noticed the Skelly and were impressed enough to start asking questions about it... ;)
Well done.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 18, 2014, 09:04:43 PM
I coach my older son's soccer team, and we had our end-of-season pizza party last night. I had gotten some stickers and soccer ball keychains for all the boys. since they're a bunch of 7 and 8 year old boys, the soccer balls were being thrown, bounced, etc., and a couple guys got upset when the ball broke off of the keychain. luckily, my Skelly was able to bend the attachment point back into place, and all tears were avoided. :tu: not to mention a couple of the other dads noticed the Skelly and were impressed enough to start asking questions about it... ;)
Well done.
I may have even gotten a couple converts last night. most of the other dads work in an office setting (like me), and from the conversation last night, it was evident they thought of a MT as a bulky tool that required a sheath. they were impressed by how much function is packed into the sleek, easily pocketable Skeletool.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 18, 2014, 10:40:19 PM
Everyone in the world knows he/she would benefit from EDCing a MT, but yet very few people do, because general they think MT's are bulky and heavy to carry. I thought the same just a little over a year ago. But when I picked up a Wingman last year, I was shocked to learn that MT can be so easy to carry (pocket clip) and quick accessible (OHO blade). I was hooked ever since.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 18, 2014, 11:26:50 PM
Doing. Christmas pictures today and I just had too
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on December 18, 2014, 11:50:27 PM
Everyone in the world knows he/she would benefit from EDCing a MT, but yet very few people do, because general they think MT's are bulky and heavy to carry. I thought the same just a little over a year ago. But when I picked up a Wingman last year, I was shocked to learn that MT can be so easy to carry (pocket clip) and quick accessible (OHO blade). I was hooked ever since.

I disagree. I encounter a lot of people who think that carrying anything (SAK, MT, torch) is totally unnecessary, and quite frankly, a little bit weird. They still think this after I have fixed problems frequently enough in front of them with my pocket carried tools that they then ask me if they can borrow stuff or fix stuff for them. Eventually I'll suggest that maybe they ought to consider carrying something, to which I normally get told they don't need to because they'll ignore the problem or just shout me over to sort it :bnghd:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 18, 2014, 11:56:36 PM
Yea you are right, there are some of those too, let's disregard them.
But the ones that find MT helpful but still not going to carry one, i think "bulk & weight" is the big factor.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on December 18, 2014, 11:57:41 PM
I think it's more likely that they'd be completely clueless what to do with the tool even if they did have one  :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 19, 2014, 12:12:46 AM
Yea you are right, there are some of those too, let's disregard them.
But the ones that find MT helpful but still not going to carry one, i think "bulk & weight" is the big factor.
Seems to be what I come across.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 19, 2014, 12:13:06 AM
I think it's more likely that they'd be completely clueless what to do with the tool even if they did have one  :rofl:
And a lot of this too.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 19, 2014, 03:34:21 AM
I coach my older son's soccer team, and we had our end-of-season pizza party last night. I had gotten some stickers and soccer ball keychains for all the boys. since they're a bunch of 7 and 8 year old boys, the soccer balls were being thrown, bounced, etc., and a couple guys got upset when the ball broke off of the keychain. luckily, my Skelly was able to bend the attachment point back into place, and all tears were avoided. :tu: not to mention a couple of the other dads noticed the Skelly and were impressed enough to start asking questions about it... ;)
Well done.
I may have even gotten a couple converts last night. most of the other dads work in an office setting (like me), and from the conversation last night, it was evident they thought of a MT as a bulky tool that required a sheath. they were impressed by how much function is packed into the sleek, easily pocketable Skeletool.

Looks like Kampfers master plan is in effect.

I think it's more likely that they'd be completely clueless what to do with the tool even if they did have one  :rofl:

Well yeah that is because you are in England. Here in Murica we are pioneers and such.  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 19, 2014, 06:18:15 AM
G'Day,

Well today was a big day for the MUT. It rode pillion around Sydney region for a good 250 km (155 miles). Not as big ride as I wanted, but the Sydney holiday traffic was getting the better of me. Why people have to rush on holiday, and not make the travel part of the journey goes beyond me.

Light duties for the MUT today. Lunch duties and a few screws to tighten and off course posing.  ;)  Other than that lots of good scenery. I include some pics of the posing.

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 19, 2014, 06:20:29 AM
G'Day,

Well today was a big day for the MUT. It rode pillion around Sydney region for a good 250 km (155 miles). Not as big ride as I wanted, but the Sydney holiday traffic was getting the better of me. Why people have to rush on holiday, and not make the travel part of the journey goes beyond me.

Light duties for the MUT today. Lunch duties and a few screws to tighten and off course posing.  ;)  Other than that lots of good scenery. I include some pics of the posing.

Cheers,

Pete

Bike pics or it didn't happen!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 19, 2014, 07:23:08 AM
So this thread is directly responsible for atleast 3x new skely users.
I got the standard, realised I am a convert and got the CX.
Gifted the standard to a friend who also carries it now. Now on holiday with said friend and a third showed big interest over his wave. We clubbed in and got him one too.

Deep south skelly gang.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 19, 2014, 07:26:21 AM
Bike pics or it didn't happen!

Oh but it did...

These were taken at our breakfast stop halfway between Sydney and Singleton at a cafe called Grey Gum.

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 19, 2014, 07:28:02 AM
Deep south skelly gang.

That is great!!!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 19, 2014, 07:56:26 AM
Seen like my evil plan is working flawlessly.  >:D

Hi 50ft-trad  :waving:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 19, 2014, 08:21:19 AM
Nice bike Pete! :tu:
I done some bike racing (illegally) in my teenage, after a friend lost his life, I swore never ride one again. :poh:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 19, 2014, 08:32:01 AM
Nice bike Pete! :tu:
I done some bike racing (illegally) in my teenage, after a friend lost his life, I swore never ride one again. :poh:

Thanks Kampfer,

Sorry to hear about your friend. I have gone through that as well and it is never nice, but it just re-focused me to try and be safe. I only travel by bike, the wife uses the car.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 19, 2014, 09:41:04 AM
Sorry about your friend Kampfer.

Nice bike Pete! :tu:
I done some bike racing (illegally) in my teenage, after a friend lost his life, I swore never ride one again. :poh:

Thanks Kampfer,

Sorry to hear about your friend. I have gone through that as well and it is never nice, but it just re-focused me to try and be safe. I only travel by bike, the wife uses the car.

I am the same way Peter. Only drive my truck in the pooring rain or snow. 2005 Dyna with 46000 miles on it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 19, 2014, 10:16:55 AM
I am the same way Peter. Only drive my truck in the pouring rain or snow. 2005 Dyna with 46000 miles on it.

Spoken like a true biker!!!  :cheers:

Luckily we don't get snow in Sydney. There is no ways I'll be on a bike in snow. Rain does not bother me, it is only water. But some idiots in cars seems to think aquaplaning is a sport everyone on the road should play.  :facepalm:

The desert must be a welcome change then?

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 19, 2014, 10:17:05 AM
Seen like my evil plan is working flawlessly.  >:D

Hi 50ft-trad  :waving:
Yeah, what's Mr "Skeletool's aren't for me" doing lurking around here?  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 19, 2014, 10:18:38 AM
These were taken at our breakfast stop halfway between Sydney and Singleton at a cafe called Grey Gum.

Pete
Perhaps I should live there.  :(
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on December 19, 2014, 10:24:47 AM
These were taken at our breakfast stop halfway between Sydney and Singleton at a cafe called Grey Gum.

Pete
Perhaps I should live there.  :(

Thought you had a girl.  :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 19, 2014, 10:39:54 AM
These were taken at our breakfast stop halfway between Sydney and Singleton at a cafe called Grey Gum.

Pete
Perhaps I should live there.  :(

Thought you had a girl.  :think:
I have had many.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 19, 2014, 10:52:48 AM

Thought you had a girl.  :think:
I have had many.

Interesting...

This is a bike mecca over the weekend, no doubt there are some frolicking in the woods.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 19, 2014, 11:25:52 AM
I am the same way Peter. Only drive my truck in the pouring rain or snow. 2005 Dyna with 46000 miles on it.

Spoken like a true biker!!!  :cheers:

Luckily we don't get snow in Sydney. There is no ways I'll be on a bike in snow. Rain does not bother me, it is only water. But some idiots in cars seems to think aquaplaning is a sport everyone on the road should play.  :facepalm:

The desert must be a welcome change then?

Pete

Would be great if I had my bike here, well except for the IEDs.

I do have me Skelly here though. Just used it to help unhook a faulty radio in the TOC so it could be replaced.

Would post pictures but then I would have to shoot all of you.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on December 19, 2014, 05:10:09 PM
Seen like my evil plan is working flawlessly.  >:D

Hi 50ft-trad  :waving:
Yeah, what's Mr "Skeletool's aren't for me" doing lurking around here?  :pok:

 :rofl:

I just popped it to see how many were succeeding and how many were struggling. Or maybe it was to give the hornets nest a bit of a  :pok: .... well, it was one of those, I can't quite remember which at the minute  :whistle:

 :P

 :D :D :D

In all seriousness, if a tool works for you that's all that matters  :salute: and it's great to see that so many of my friends here haven't had to get therapy to deal with the trauma of having being stuck with such a bloody awful tool for a month  :rofl: 

Good on ya guys, keep it up, and I genuinely hope the rest of the month works out well for you  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 20, 2014, 03:56:22 AM
Steak knife duty tonight
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 20, 2014, 09:47:15 AM
G'Day,

Day 20, wow 66% through it already.

Not real challenges for the MUT today. We were invited to a bbq, but my son developed a skin rash that we though the other 35 guests should probably not be exposed to just before xmas. So we had a small inside bbq with traditional "boerewors" - south african beef sausage on rolls with a sauce of choice.

Tomorrow I will light the Weber and make espetada with the Mighty Mut on duty. The meat has been marinating since this morning. The skewers have been soaking in red wine and bay leaves which infuse the meat and stop the wood from burning. I'll add some mouth watering pictures after lunch.

Enjoy day one of the weekend,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 20, 2014, 09:53:27 AM
Steak knife duty tonight
I want to see that steak!  :drool:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 20, 2014, 10:06:42 AM
Wrapping Christmas presents this morning, couldn't done it without scissors, so micra was called out to help.

Later went to son's classroom Christmas party, Skelly fixed a couple wobbly chairs to make up its earlier let down. A few dads noticed the cool tool I had in hand and gave compliments. One even pointed out Skelly reminds him the Terminator.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 21, 2014, 01:21:10 AM
No steak pics but it helped me make peanut butter cookies  :drool:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on December 21, 2014, 01:36:16 AM
I never understood the inclusion of peanut butter in sweet snacks, or combined with chocolate. To me peanut butter is something that belongs on toast and nowhere else. Actually, that's not true! I did once try a peanut butter, fried egg and melted cheese sandwich (on someone's recomendation) and it was actually really good. I have tried peanut butter based sweet stuff (like those reeses cup things) a few times before though, and it was just so WRONG! It's like roast beef with custard, or cheesecake with horseradish sauce  :ahhh :ahhh :ahhh

 :oops: Sorry, I forgot I wasn't allowed in this thread  :whistle:


 :P  :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: derekmac on December 21, 2014, 01:43:22 AM
Peanut butter is awesome with chocolate, ice cream, more chocolate, chocolate ice cream, fudge, fudge and more fudge, cookies, chocolate chunk cookies, oatmeal cookies...


Sent from my iPad using Tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on December 21, 2014, 01:46:17 AM
 :ahhh :ahhh :ahhh
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 21, 2014, 02:12:10 AM
:oops: Sorry, I forgot I wasn't allowed in this thread  :whistle:
You are invited to witness the awesomeness of the tool you hate. :D

Would you host an Octane challenge after we are done?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 21, 2014, 02:31:35 AM
I thought we could do the crkt guppie challenge next :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on December 21, 2014, 02:55:03 AM
:oops: Sorry, I forgot I wasn't allowed in this thread  :whistle:
You are invited to witness the awesomeness of the tool you hate. :D

Would you host an Octane challenge after we are done?

 :P :D :D

Sorry mate, it's only a good choice for me at certain times dependent on the day, plus I've now converted mine to knifeless now so it wouldn't be a fair "trial". Besides, I tried doing one of these challenges a while back, and it affected my life too much to compromise what I needed to carry for the sake of a bit of online fun :salute: I think I lasted about a week  :think: maybe not even that
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 21, 2014, 02:56:26 AM
This challenge is a lot harder than I thought it would be.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on December 21, 2014, 02:57:25 AM
This challenge is a lot harder than I thought it would be.

So what's been the most challenging aspects for you?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 21, 2014, 02:58:37 AM

This challenge is a lot harder than I thought it would be.

So what's been the most challenging aspects for you?

lack of screwdriver and other tools. Plus the freestyle doesn't carry very well.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 21, 2014, 03:10:35 AM
I never understood the inclusion of peanut butter in sweet snacks, or combined with chocolate. To me peanut butter is something that belongs on toast and nowhere else. Actually, that's not true! I did once try a peanut butter, fried egg and melted cheese sandwich (on someone's recomendation) and it was actually really good. I have tried peanut butter based sweet stuff (like those reeses cup things) a few times before though, and it was just so WRONG! It's like roast beef with custard, or cheesecake with horseradish sauce  :ahhh :ahhh :ahhh

 :oops: Sorry, I forgot I wasn't allowed in this thread  :whistle:


 :P  :rofl:

After saying this I am not sure you should be allowed on this forum.  :pok:

You know how to make something better?

Add peanut butter.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 21, 2014, 04:06:12 AM

This challenge is a lot harder than I thought it would be.

So what's been the most challenging aspects for you?

lack of screwdriver and other tools. Plus the freestyle doesn't carry very well.
I can imagine.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 21, 2014, 04:15:50 AM
Skelly wants blood! I was doing something stupid. :oops:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 21, 2014, 04:16:39 AM
Youch!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 21, 2014, 04:17:49 AM
I will live.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 21, 2014, 04:25:16 AM
Skelly wants blood! I was doing something stupid. :oops:

What were you doing?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: captain spaulding on December 21, 2014, 04:48:41 AM
Skelly wants blood! I was doing something stupid. :oops:

Play stupid games, win stupid prizes.  :D

Welcome to the blood donor club. I'm the President. You can be second in command.  ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 21, 2014, 05:02:25 AM
Skelly wants blood! I was doing something stupid. :oops:

Play stupid games, win stupid prizes.  :D

Welcome to the blood donor club. I'm the President. You can be second in command.  ;)

That would make Kampfer number two.

I approve this.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 21, 2014, 05:15:25 AM
Skelly wants blood! I was doing something stupid. :oops:

Play stupid games, win stupid prizes.  :D

Welcome to the blood donor club. I'm the President. You can be second in command.  ;)
:imws:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 21, 2014, 05:17:16 AM
Pan fried boerie is better than no boerie at all.

I have used the skelly pliers to move a braai grid on the beach at Cape Vidal. Sadly used a Vic Skipper to cut the boerewors though.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: captain spaulding on December 21, 2014, 05:18:26 AM
Skelly wants blood! I was doing something stupid. :oops:

Play stupid games, win stupid prizes.  :D

Welcome to the blood donor club. I'm the President. You can be second in command.  ;)
:imws:

What does that make you then?  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 21, 2014, 10:22:09 AM
G'Day,

Day 21, and a good day it was.

We had some friends over for a proper bbq lunch. The MUT was on duty the whole day. From moving grids onto the fire to cutting the obligatory tasters and doing lunch cutting duties, even though the meat was tender enough to cut with a butter knife.

No real work today. The closest it got was to open a packet of fire starters.

I include a few pictures of the MUT on duty, soaking skewer sticks and the best espetada we had in a long time.

Also a picture of the two best implements from the USA: Leatherman and the Weber kettel bbq.

Cheers from a very satisfied cook  :D

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 21, 2014, 10:23:48 AM
And finally the food!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 21, 2014, 10:25:14 AM
Hi Kampfer,

Sorry to see your hand, that cut looks nasty.

I hope you get better soon!!!

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 21, 2014, 10:43:47 AM
Thanks, it wasn't so bad, it looked worst in photo.
I took two big slashs on my back, back in my young and stupid age, I survived. :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 21, 2014, 11:17:01 AM

I took two big slashs on my back, back in my young and stupid age, I survived. :facepalm:


This seems to be a recurring theme in your stories Kampfer.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 21, 2014, 11:22:13 AM
http://www.whittakers.co.nz/#/products/blocks/peanutbutter88/  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zimchaz on December 21, 2014, 05:59:48 PM
And finally the food!
Ja ouen that vleis is making my mouth water...not the weather for a braai here in the UK.I guess you and shark_za are both saffas?howzit from a zimbo!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 21, 2014, 11:46:10 PM
Helped remove a piece of plastic from my sons toy
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 22, 2014, 03:11:14 AM
Skelly will be on M-4 cleaning duty after yesterdays range.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 22, 2014, 08:27:36 AM
Ja ouens that vleis is making my mouth water...not the weather for a braai here in the UK.I guess you and shark_za are both saffas?howzit from a zimbo!

Yebo Gogo,

Luckily our weather is fine all year around for a "braai". The only time I light the gas bbq is on the extremely hot days where we have a fire ban.

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 22, 2014, 08:34:38 AM
G'Day,

Day 22 for the Mighty MUT.

Some real work duties today. I mowed the lawn and trimmed the edges. The MUT was on plastic cord duty for the edge trimmer. It cut through 3mm cord very easily. The new pliers is starting to loosen up. I have also learnt that the clip that keeps the tool from opening can dig a little into ones hand. It needs to be folded away completely. The MUT also got its first few scratches on the pliers. Now it is a beater tool.  :D

One more day of holidays before going back to work for a day and xmas day off.

Kampfer, how is your hand doing?

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 22, 2014, 08:44:30 AM
I already forgot about it. :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 22, 2014, 10:39:03 AM
I already forgot about it. :D

Excellent  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 22, 2014, 10:46:44 AM
I had a few more tasks in the garage tonight.

First was to fit a GPS bracket on the new bike, sadly no 7/16 adapter for the MUT  ;)

Next was to remove some old plugs on the old bike's crash-bars. The right one came out pretty easily, and I must admit, the MUT pliers is really nice and can open wide. I think the additional weight of the tool helps with doing difficult pulling.

The left side was not so straight forward. The plug broke and I had to prey the remaining bit out with the help of a shortened Allen Key and the Mighty MUT. The brass scraper works well as an awl too.

That's all folks, till tomorrow, have a good evening.

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 22, 2014, 11:16:15 PM
Vacuum repair and cleaning today
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 23, 2014, 02:44:03 AM
This was up on leathermans Facebook page makes me want a skeletool cx even after this challenge
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 23, 2014, 05:07:05 AM
just checking in after a busy weekend... we hosted a dinner with extended family Saturday night, so my trusty CX helped me with grilling duties (opening packages, cutting meat, etc.) and opening beverages for the guests (and for me too, of course). :cheers:


EDIT: woah, 1500 posts! :o
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 23, 2014, 05:11:09 AM
just checking in after a busy weekend... we hosted a dinner with extended family Saturday night, so my trusty CX helped me with grilling duties (opening packages, cutting meat, etc.) and opening beverages for the guests (and for me too, of course). :cheers:


EDIT: woah, 1500 posts! :o

Grats on 1500 and more importantly beverages.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Huntsman on December 23, 2014, 05:45:41 AM
Can I join in - please, please - I have a regular Skelly - See pic

01 - Kampfer, Skeletool X
02 - Powernoodle, Skeletool
03 - Breezy12, Skeletool CX
04 - HarleyXJGuy, Skeletool
05 - GPS12, Skeletool CX
06 - colt 1911, Skeletool
07 - eddie1115, Skeletool
08 - pietervn, BO MUT
09 - geekdadrepair, SkeleVerde
10 - AdmSlc, Freestyle CX
11 - Timboslice, Skeletool
12 - getahl, Style CS
13 - Grathr, Skeletool
14 - Ductapetech, Skeletool CX
15 - Syncop8r, Skeletool CX
16 - kmfdm, MUT
17 - Huntsman, Skeletool

Unofficial Challenger: JBW1's daughter, Style CS

Note: List copied from Kampfer's post - November 30, 2014, 08:19:59 PM

I have been doing the challenge since 1/12 - I promise  - I just never got round to officially entering with my piccie
If you let me join - I will update you on pre challenge thoughts and during challenge performance of tool and user!

As a bribe - Here is a brief taster: 
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 23, 2014, 05:53:16 AM
Ok welcome to the coolest party on MTO as all the cool kids are here, along with a few haters. ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 23, 2014, 05:54:28 AM
Tonight's diner: Chicken.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 23, 2014, 05:58:14 AM
Train set for my boys
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 23, 2014, 06:33:10 AM
Ok welcome to the coolest party on MTO as all the cool kids are here, along with a few haters. ;)

Hater reporting in.

Although if things continue to go well I may drink some of Kampfers kool aide.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 23, 2014, 06:39:51 AM
you are a hater now?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 23, 2014, 06:46:07 AM
you are a hater now?

Sure I hate a lot of stuff. Mostly just Monrogue and reality TV at the moment.

On the Skelly front I was very unsure coming in because of the strange look and low tool density. My new posistion at a desk has showed me that for light duty the tool set on the Skelly is almost perfect.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 23, 2014, 06:54:50 AM
Yea desk jockeys love Skelly.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 23, 2014, 06:58:03 AM
Yea desk jockeys love Skelly.

Took me 19 years but I am rocking the heck out of a desk. Not happy about it but what can you do.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 23, 2014, 07:40:35 AM
G'Day,

Another Day, and no challenge... :D

I did not need the MUT at all today. I did take it out though to change one of the bits out that I used to carry in the spare bit holder on the outside of the handle. Originally I had a small flat combined with a torx. That changed today when I got an additional small and medium flat bit from a mate of mine. I would love to have a small Phillips and small flat, but I don't think a flat bit like that exists. This will add some more versatility to the already versatile MUT.

Now for the pics, it is not easy to photograph the bits, even with reasonably good light.  ;)

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 23, 2014, 07:42:28 AM
Yea desk jockeys love Skelly.

Took me 19 years but I am rocking the heck out of a desk. Not happy about it but what can you do.

You need a MUT Harley. The desk jockeys shiver when the MUT appears next to the smaller Skelly cousin  :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on December 23, 2014, 08:25:53 AM
As has been typical these last few days, Skele duty consisted of opening packages and Christmas cards.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 23, 2014, 11:03:52 AM
Yea desk jockeys love Skelly.

Took me 19 years but I am rocking the heck out of a desk. Not happy about it but what can you do.

You need a MUT Harley. The desk jockeys shiver when the MUT appears next to the smaller Skelly cousin  :D

You would be surprised how few Soldiers carry any MT no less one I could scare with a MUT.

Honestly though not to bash your tool I do not think it is from me. If I am going to rock something that heavy it will be a Surge or ST 300. Just so many more tools on them. When I win this challenge due to my sheer awesomeness I will show you how to style with a ST 300 but good.  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 23, 2014, 11:39:30 AM
I think you need a Surge.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 23, 2014, 11:49:04 AM
I think you need a Surge.

No kidding Captain Obvious!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 23, 2014, 01:17:24 PM

Yea desk jockeys love Skelly.

Took me 19 years but I am rocking the heck out of a desk. Not happy about it but what can you do.

You need a MUT Harley. The desk jockeys shiver when the MUT appears next to the smaller Skelly cousin  :D

You would be surprised how few Soldiers carry any MT no less one I could scare with a MUT.

Honestly though not to bash your tool I do not think it is from me. If I am going to rock something that heavy it will be a Surge or ST 300. Just so many more tools on them. When I win this challenge due to my sheer awesomeness I will show you how to style with a ST 300 but good.  :whistle:

Doesnt every soldier carry a MT?
Pretty much everyone did when I was in, 12 years ago.



Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 23, 2014, 01:24:29 PM
You guys are in the championship rounds, eat lightnin and crap thunda!!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 23, 2014, 04:10:54 PM
Because of the lack of screwdrivers on my freestyle I had to use my Dewalt to assemble some bed frames. Felt ashamed having a MT in my pocket and having to look for a screwdriver. Aaaasahhhhhh
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 23, 2014, 04:17:03 PM

Yea desk jockeys love Skelly.

Took me 19 years but I am rocking the heck out of a desk. Not happy about it but what can you do.

You need a MUT Harley. The desk jockeys shiver when the MUT appears next to the smaller Skelly cousin  :D

You would be surprised how few Soldiers carry any MT no less one I could scare with a MUT.

Honestly though not to bash your tool I do not think it is from me. If I am going to rock something that heavy it will be a Surge or ST 300. Just so many more tools on them. When I win this challenge due to my sheer awesomeness I will show you how to style with a ST 300 but good.  :whistle:

Doesnt every soldier carry a MT?
Pretty much everyone did when I was in, 12 years ago.



Sent from a device made from star dust using tapatalk

No not at all, maybe half? I am guessing less then that though.

Been that way for as long as I can remember.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Higgins617 on December 23, 2014, 04:56:02 PM
They should just start issuing Les Stroud tools, instead of frags just throw those at people. Likely to be just as dangerous!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 23, 2014, 07:31:41 PM
Because of the lack of screwdrivers on my freestyle I had to use my Dewalt to assemble some bed frames. Felt ashamed having a MT in my pocket and having to look for a screwdriver. Aaaasahhhhhh

 :twak: Freestyle.  :twak:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 24, 2014, 12:28:43 AM
No hole no problem
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on December 24, 2014, 12:47:18 AM
No hole no problem
I really miss the 93mm SAK awl for this ^.  Sure the blade can do it, but it's almost as if the awl was made for punching holes...:)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 24, 2014, 01:22:42 AM
I miss a good sak too
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 02:44:54 AM

.....but it's almost as if the awl was made for punching holes...:)


 :think:

Oh the Compact got to Mile yesterday Brian.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on December 24, 2014, 02:51:18 AM



.....but it's almost as if the awl was made for punching holes...:)


 :think:

Oh the Compact got to Mile yesterday Brian.

He let me know, one step closer...
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 24, 2014, 03:35:03 AM
No damage at all - just a missing bit.  :(
Then photos to prove there are no damages!  :twak:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 24, 2014, 05:05:45 AM
You would be surprised how few Soldiers carry any MT no less one I could scare with a MUT.

Honestly though not to bash your tool I do not think it is from me. If I am going to rock something that heavy it will be a Surge or ST 300. Just so many more tools on them. When I win this challenge due to my sheer awesomeness I will show you how to style with a ST 300 but good.  :whistle:

That is interesting.

I would have thought that any soldier would want to carry at least a basic MT. Possibly the Leatherman marketing that makes us mere mortals think that each soldier should carry a MUT. I agree about weight and tool usefulness, for that weight I'll carry a Surge too. I have never really like the ST300.

Good luck with winning... I don't think you need the ST300 to show style, you have that already  ;)

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 05:19:49 AM
You would be surprised how few Soldiers carry any MT no less one I could scare with a MUT.

Honestly though not to bash your tool I do not think it is from me. If I am going to rock something that heavy it will be a Surge or ST 300. Just so many more tools on them. When I win this challenge due to my sheer awesomeness I will show you how to style with a ST 300 but good.  :whistle:

That is interesting.

I would have thought that any soldier would want to carry at least a basic MT. Possibly the Leatherman marketing that makes us mere mortals think that each soldier should carry a MUT. I agree about weight and tool usefulness, for that weight I'll carry a Surge too. I have never really like the ST300.

Good luck with winning... I don't think you need the ST300 to show style, you have that already  ;)

Pete

Yeah I would think every Soldier carries a MT but that is not the case at all. Even early in the war when the budget was huge and they threw Gerber 600's at us all the time a lot of guys did not carry them.

I get people come to me almost everyday looking to use a knife or MT.

You might have to cancel you MTO account by the way. It is against the user agreement to not like the ST 300.  :twak:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 05:23:58 AM
Oh and I have only seen one MUT carried by a Soldier in my 26 years of doing this.

I am going to check with the EOD guys and see what they have and do an informal check of the guys in this building.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grant Lamontagne on December 24, 2014, 05:50:49 AM
Most of those 26 years don't count- the MUT only came out a few years ago.  I doubt too many guys would have been carrying it before then. 

Def

Sent from my smurfing hunk of techno sorcery

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 05:52:58 AM
Most of those 26 years don't count- the MUT only came out a few years ago.  I doubt too many guys would have been carrying it before then. 

Def


There is always one guy in the group who has to be a smart smurf.  :twak:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 06:06:33 AM
So my perceptions may have been colored by the people who come to me all the time needing tools or my sample size is to small. Anyhow these are my informal small survey.

Out of the 7 Soldiers who work in the TOC.

3 have nothing.

2 with just a MT. Skelly :tu: and a Gerber Crucial he say he bought because it is small and he loves it. He had no idea what model it was until he pulled it out of his pocket and looked.

1 with just a knife. POS Gerber that I suspect is a knockoff copy.

1 with a MT and knife. OHT and a Tan Spyderco Native OEF he just won in the lottery. Says he did not use to carry a MT but bought the OHT for this deployment.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 24, 2014, 06:08:28 AM
Most of those 26 years don't count- the MUT only came out a few years ago.  I doubt too many guys would have been carrying it before then. 

Def


There is always one guy in the group who has to be a smart smurf.  :twak:
That is the boss you are talking to!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 24, 2014, 06:08:56 AM
A walk in the park with Skelly.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 24, 2014, 06:10:22 AM
Pre-Xmas fest:
You want trouble? I got trouble for you!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 24, 2014, 06:25:01 AM
Quote from: HarleyXJGuy link=topic=55539.msg1013318#msg1013318

You might have to cancel you MTO account by the way. It is against the user agreement to not like the ST 300.  :twak:

 :rofl:

There are a few MT I don't like. The ST300 is to big for my hands to use comfortably. I had one for a few weeks, but gifted it to a very good mate. He loves it though.

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 24, 2014, 06:30:35 AM
So my perceptions may have been colored by the people who come to me all the time needing tools or my sample size is to small. Anyhow these are my informal small survey.

Out of the 7 Soldiers who work in the TOC.

3 have nothing.

2 with just a MT. Skelly :tu: and a Gerber Crucial he say he bought because it is small and he loves it. He had no idea what model it was until he pulled it out of his pocket and looked.

1 with just a knife. POS Gerber that I suspect is a knockoff copy.

1 with a MT and knife. OHT and a Tan Spyderco Native OEF he just won in the lottery. Says he did not use to carry a MT but bought the OHT for this deployment.

A lot comes down to the individual then. If a MT is out then at least a knife? Is that not part of the standard issue for a soldier? Then again, if you have a firearm, a MT is secondary...

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 24, 2014, 06:41:54 AM
G'Day,

A very happy Christmas Eve to everyone!!!

I had a busy day with the MUT today. I got some old beer kegs that I want to turn into BBQ's. One may become a smoker or a pizza oven.

I don't drink, so a Keg was quite a foreign concept to open. Google was my friend and I soon found how to de-pressurize the Keg and get the internals out. The MUT worked well to de-pressurize it. I had to use both hands to get the pressure valve down. That took a bit of effort and ended in a beer bath for the MUT and me. MUT smiled after that  ;)

The pliers was not strong enough to get the internal spring mechanism out and eventually I had to use a proper pliers. I don't think any MT would be able to turn the spring out.

The kegs have now been rinsed and I will devise a plan over the weekend. I'm no welder so I'll have to find a boiler maker who can make the bottom structure / feet.

I have a grid already as well as the fire stuff...

Other than that, no duties for the MUT today. Tomorrow is off to xmas lunch and no doubt the bottle opener will be called on frequently. I'll have to wear my 1/2 jean pant again...

Enjoy Christmas Eve,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 24, 2014, 07:02:28 AM
The skele has had a quiet time lately. Just the usual feathering firewood and opening a few packages.


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 07:04:35 AM
Most of those 26 years don't count- the MUT only came out a few years ago.  I doubt too many guys would have been carrying it before then. 

Def


There is always one guy in the group who has to be a smart smurf.  :twak:
That is the boss you are talking to!

When did my wife get on this forum? Why did she go with the forum name Grant? Weird.

So my perceptions may have been colored by the people who come to me all the time needing tools or my sample size is to small. Anyhow these are my informal small survey.

Out of the 7 Soldiers who work in the TOC.

3 have nothing.

2 with just a MT. Skelly :tu: and a Gerber Crucial he say he bought because it is small and he loves it. He had no idea what model it was until he pulled it out of his pocket and looked.

1 with just a knife. POS Gerber that I suspect is a knockoff copy.

1 with a MT and knife. OHT and a Tan Spyderco Native OEF he just won in the lottery. Says he did not use to carry a MT but bought the OHT for this deployment.

A lot comes down to the individual then. If a MT is out then at least a knife? Is that not part of the standard issue for a soldier? Then again, if you have a firearm, a MT is secondary...

Pete

They use to give out Gerber 600's with the Otis cleaning kits but have not for a couple of years. No official issue knife or MT.

Many years ago we use to have a bayonet we signed out from the arms room with our rifle. Not since the late 80's or early 90's though.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 24, 2014, 07:08:03 AM
I noticed Americans don't like bayonets.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 07:13:46 AM
I noticed Americans don't like bayonets.

Yeah if it comes down to a bayonet charge we have failed on so many levels.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: babola on December 24, 2014, 07:15:29 AM
They use to give out Gerber 600's with the Otis cleaning kits but have not for a couple of years. No official issue knife or MT.
Many years ago we use to have a bayonet we signed out from the arms room with our rifle. Not since the late 80's or early 90's though.

Funny I heard that too from the military surplus store owner I got my 'US Army issue MP600' from, for peanuts. He basically told me his store is now full of them as they're an old stock overflow and the US army doesn't officially issue any MT's to it's troops due to budgetary cuts, anymore.

Such a shame it came to that.  :(

I guess this will affect future production numbers for the new Gerber MP1-AR still to be officially announced, their Effect and Crew models, let alone Leatherman MUT and OHT.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 24, 2014, 07:17:57 AM
I noticed Americans don't like bayonets.

Yeah if it comes down to a bayonet charge we have failed on so many levels.

I thought war has progressed a little since the active use of bayonets.

Thanks for the comments on the issue of additional MT or knives.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: babola on December 24, 2014, 07:18:27 AM
I noticed Americans don't like bayonets.

Yeah if it comes down to a bayonet charge we have failed on so many levels.

Bayonet charge used to be a matter of course in the past, these days both sides will most likely run for cover if the fight came that close  ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 07:22:18 AM
Yeah I think the bayonet charge was something that came of limited rate of fire and ammo capacity of the day.

Where is JDevil when you need him?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 24, 2014, 07:24:21 AM
It is still useful for boosting morale, crowd control, guarding prisoners, etc. At least I think so.
Soviet / Russian soldiers always have bayonets with their AKs.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 07:26:39 AM
It is still useful for boosting morale, crowd control, guarding prisoners, etc. At least I think so.
Soviet / Russian soldiers always have bayonets with their AKs.

Trained with Soldiers from both Russia and Kazikstan before. They love some bayonets for sure.

They use them a lot for the intimidation factor against civilians and less trained folks. Well that and sweet trade bait with American Soldiers.

Still have a couple I got back in the day.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: babola on December 24, 2014, 07:29:07 AM

Trained with Soldiers from both Russia and Kazikstan before. They love some bayonets for sure...

I can imagine Borat carrying one, for sure  ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 07:36:31 AM
So I just talked to the EOD guy and they do not get any MT issued to them anymore.

He still has the one he got a few years ago and it is a Gerber MP 600 but it has crimper pliers head and a C-4 punch.

He brought up the MUT saying that it is out there but not in use by the Army.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grant Lamontagne on December 24, 2014, 07:39:29 AM
With a $100 price tag vs the $40-60 for an MP600 I can imagine it will be a cold day in fiery place before bean counters feel the MUT is acceptable for issue.

Def

Sent from my smurfing hunk of techno sorcery

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: babola on December 24, 2014, 07:42:59 AM
Agree, MUT is too expensive and to 'fancy' for a standard US Army issue.

You'd probably be labeled as a poseur by another soldier next to you.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 07:57:46 AM
Agree, MUT is too expensive and to 'fancy' for a standard US Army issue.

You'd probably be labeled as a poseur by another soldier next to you.

Or based on what I have seen they would borrow it and "forget" to return it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 24, 2014, 08:26:51 AM
If you marketed something as for "Military Use" then there is a good chance that some civilians will rush to buy it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 24, 2014, 08:31:16 AM
If you marketed something as for "Military Use" then there is a good chance that some civilians will rush to buy it.

Indeed, just look how popular the surplus stores are. Ever motorcycle gear are made in Camo.

I just love the wide array of topic we can discuss here. This forum rocks!!!

Cheers

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 24, 2014, 08:32:07 AM
Switching  a switch.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 24, 2014, 10:34:37 AM
Funny I heard that too from the military surplus store owner I got my 'US Army issue MP600' from, for peanuts. He basically told me his store is now full of them as they're an old stock overflow and the US army doesn't officially issue any MT's to it's troops due to budgetary cuts, anymore.
Tell me more  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 11:08:05 AM
Funny I heard that too from the military surplus store owner I got my 'US Army issue MP600' from, for peanuts. He basically told me his store is now full of them as they're an old stock overflow and the US army doesn't officially issue any MT's to it's troops due to budgetary cuts, anymore.
Tell me more  :pok:

I do not know about this surplus store but when the war first started they were throwing them at us for a few years.

At one point I had 7 or 8 of them. So I am sure a lot of Soldiers got out and sold them at pawn or surplus stores.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zimchaz on December 24, 2014, 04:17:59 PM
I get Rambo remarks when people see my esee 3 on my molle belt and most guys don't notice any difference between a surge or st300 and a budget tool like a wingman or even worse...a hesco MT.There is not many Brit soldiers that truly value a knife as far as I see or an MT for that matter.But endless requests to use mine when we are in the field and they come up short.As an engineer, more of our blokes carry pliers based MT because it's lighter than carrying the issued wire cutters plus a knife, but most don't carry anything.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 24, 2014, 04:23:34 PM
Been a few days since I posted here, but Skeletool just been doing some cutting, wire snipping and turned a few nuts and bolts here a there. Nothing to major.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 24, 2014, 08:40:10 PM
Been a few days since I posted here, but Skeletool just been doing some cutting, wire snipping and turned a few nuts and bolts here a there. Nothing to major.

A lot of that going around with the holidays.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 24, 2014, 08:41:58 PM
Today the skele has been on gift opening and putting batteries into toys duty, wich it did perfectly.


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 24, 2014, 11:39:03 PM
Pineapple duty
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 25, 2014, 01:14:20 AM
The is blade is a little short for that don't you think?
I wish there is a 3" blade on Skelly.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 25, 2014, 01:42:00 AM
It worked ok had to do some cut and pry to get the top and bottom off a regular knife would have been better but I figured why not
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 25, 2014, 08:54:55 AM
Merry Christmas, challengers.
I hope your Skelly's blade is sharp, we have lots presents to open. Have the bits ready, we have lots batteries to install.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 25, 2014, 10:54:10 AM
G'Day,

Day 25 already!!!

A merry Christmas to you Kampfer and our fellow challengers.

Today was a good day for the MUT. Mostly carving lamb on a spit and opening bottles. No pictures, but I did explain the challenge to some mates around the spit. One was quite interested the rest thought I needed to up my medication  :o How Rude I Thought  :D

We kept away from noisy toys and most were water toys or computer games. I did not install a single battery.

Six days to go, I cannot believe this month has flown so quickly. I guess this time of the year is by default very busy and has accelerated our month.

Have a good day, mind the intake of food  ;)

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 25, 2014, 03:03:40 PM
Lots of this have a merry Christmas and be safe
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmanct3 on December 25, 2014, 03:49:44 PM
Looks good , I should have tried :cry:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 25, 2014, 05:34:04 PM
Took the Skeletool fishing this week, its very hot in the Southern Hemisphere right now, being in the province of Kwazulu Natal for holiday is like just stoking the fire even more.
Skelly took out a stubborn drain plug on the boat and dipped the barbecue grip into the dam to cool it when we were finished.
I used the T6 torx bit to swap around a friends Spyderco resilience clip.


Carrying the Philips 1-2 and flat combo bit with the Torx 6/7 in the spare holder seems to be the best for me.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 26, 2014, 03:23:22 AM
Being so close to the end I am struck by the fact I do not think anyone has dropped out due to the Skelly not being enough tool?

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 26, 2014, 04:13:15 AM
Being so close to the end I am struck by the fact I do not think anyone has dropped out due to the Skelly not being enough tool?
I did wish to have scissors a couple times, but I got by using knife or wait until later. So for average person i think there are enough tools. But tradesmen like colt and Nate might needed something a bit more. Again, as trademen they should use dedicated tools on the job, using MT just for fun.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 26, 2014, 04:30:21 AM
Being so close to the end I am struck by the fact I do not think anyone has dropped out due to the Skelly not being enough tool?
I did wish to have scissors a couple times, but I got by using knife or wait until later. So for average person i think there are enough tools. But tradesmen like colt and Nate might needed something a bit more. Again, as trademen they should use dedicated tools on the job, using MT just for fun.

True.

If I was still doing all the construction and not in the TOC this would have been more of a challenge.

i was going to say in my last post that this also shows how little a lot of us use MTs. More of carry and collect action going on.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 26, 2014, 05:16:55 AM
In my last post at page 38 can be seen that the carbon scraper is missing. That`s cause i wanted to give the MUT a bit more xmas touch and polished it. Now MUT is complete a few days again and i took some posing pic`s. Hope it holds it`s shine to the end odf the year.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 26, 2014, 05:39:45 AM
In my last post at page 38 can be seen that the carbon scraper is missing. That`s cause i wanted to give the MUT a bit more xmas touch and polished it. Now MUT is complete a few days again and i took some posing pic`s. Hope it holds it`s shine to the end odf the year.

Pimpin
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 26, 2014, 06:49:31 AM
Tried with hammer but it`s too messy. Now cracking some nuts with pliers like normal people are used to.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 26, 2014, 06:53:34 AM
Tried with hammer but it`s too messy. Now cracking some nuts with pliers like normal people are used to.

Not how my wife does it.  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 26, 2014, 09:22:39 AM
In my last post at page 38 can be seen that the carbon scraper is missing. That`s cause i wanted to give the MUT a bit more xmas touch and polished it. Now MUT is complete a few days again and i took some posing pic`s. Hope it holds it`s shine to the end odf the year.

That looks very nice, what did you polish it with? I'm going to give that a go!

I found that the more shinier it gets the more fingerprints show  :( Not good for OCD

Pete


Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 26, 2014, 09:26:02 AM
Tried with hammer but it`s too messy. Now cracking some nuts with pliers like normal people are used to.

Quite the opposite works for me. I found that if the nut is hard, the amount of force breaks the shell and the nut, just a big mess to clean. A slight tab with the hammer worked for me, but then I only tried it on Pestasio Nuts. My son on the other hand made a good mess with the hammer. None of the nuts he broke could be eaten...  :D

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 26, 2014, 09:30:03 AM
G'Day,

A happy Boxing day to all.

I was back at work today with no real challenge for the MUT. Lunch duty was it. I hope to get a few tasks over the weekend to test the last few days of the MUT as EDC.

I'm looking forward to having a tool with a scissors. That is the only other tool that I have missed in the MUT. I may have to look at the MUT with scissors mod that was posted a while ago.

Cheers,

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 26, 2014, 09:56:25 AM
In my last post at page 38 can be seen that the carbon scraper is missing. That`s cause i wanted to give the MUT a bit more xmas touch and polished it. Now MUT is complete a few days again and i took some posing pic`s. Hope it holds it`s shine to the end odf the year.

That looks very nice, what did you polish it with? I'm going to give that a go!

I found that the more shinier it gets the more fingerprints show  :( Not good for OCD

Pete



Brass looks pretty brassy without cleaning it time to time. Fingerprints stay on it too good.  :rant:
I used something like this on the link.
http://www.incafe2000.com/lng/Eng/Producte/producte/c-15133/cat/ferreteria
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 26, 2014, 05:14:07 PM
Skelly helped cut up some chicken codon bleu for lunch and open a care package from home.

Easy day.

Lunch.

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/random/1207141308b.jpg~original)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: babola on December 26, 2014, 07:35:36 PM
Brass looks pretty brassy without cleaning it time to time. Fingerprints stay on it too good.  :rant:
I used something like this on the link.
http://www.incafe2000.com/lng/Eng/Producte/producte/c-15133/cat/ferreteria

Great result, I used a similar polishing wheel in the past, too.

BTW, the MUT scraper isn't brass, it's made of bronze  ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 26, 2014, 08:52:59 PM
Bronze indeed  :facepalm: Tnx babola!
I use this wheel on everything i want to be shine :D So got my first LM ever, the surge, it`s shine in 2006 (lost in `08) and the next surge in 2009. Sometimes i regret it cause it blinds pretty much when working in bright sunlight. Have some plans to try
Electrolytic Polishing one day but until i have no LM parts to test the results with 400 series stainless steels it has to wait a bit.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 26, 2014, 10:26:53 PM
Less than one week from completion of this challenge, how is everyone doing?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 26, 2014, 11:24:04 PM
I have almost forgot my other tools.  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 27, 2014, 12:14:48 AM
Silver bullet time
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 27, 2014, 12:27:21 AM
Silver bullet time
:cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 27, 2014, 01:05:36 AM
 :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 27, 2014, 01:23:08 AM
(http://i70.photobucket.com/albums/i86/HarleyXJGuy/random/1207141308b.jpg~original)
Good to see the Army has got the Yellow food group covered there.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 27, 2014, 01:39:40 AM
Used the Skeletool to help remove and and add new teeth to a New Holland hayrake today. Also used to cut some twine on some haybales for some cattle and turn a few screws.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 27, 2014, 02:00:07 AM
My girl broke out her style Cs a few times to help open some of her and brothers packages. Its crazy you need tools and sometimes instructions to get toys out of their boxes these days :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 27, 2014, 07:51:45 AM
The skele is doing fine.
The fine phillips bit has proved it self as a perfect battery hatch opener on toys.



Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 27, 2014, 09:06:50 AM
G'Day

Picnic day for the MUT. Forgot the camera at home. I have realized that cutting with the clip on for an extended time can be uncomfortable.

Short post, the play is going to start soon.

Cheers Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 27, 2014, 10:52:48 AM

The skele is doing fine.

The fine phillips bit has proved it self as a perfect battery hatch opener on toys.


Which fine phillips? The one that comes with the Skelly or something you got from somewhere else?

One of the most important uses from my tools according to my spoiled daughter.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Weasel on December 27, 2014, 12:29:53 PM
G'Day

Picnic day for the MUT. Forgot the camera at home. I have realized that cutting with the clip on for an extended time can be uncomfortable.

Short post, the play is going to start soon.

Cheers Pete

I agree I've removed the clip off mine for that reason.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 28, 2014, 12:14:33 AM
Used the main blade to open a new basketball net
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: NKlamerus on December 28, 2014, 12:34:42 AM
Cut some wires today. Installed a Kwik Stud. (http://tapatalk.imageshack.com/v2/14/12/27/f3e716ab578219885d107c09aa2b8ac8.jpg)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 28, 2014, 01:49:52 AM
My uncle saw my Skelly today and now he wants one. Good I have the 50% off discount.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 28, 2014, 02:44:10 AM
Cut some wires today. Installed a Kwik Stud. (http://tapatalk.imageshack.com/v2/14/12/27/f3e716ab578219885d107c09aa2b8ac8.jpg)
Like your thumb stud man :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 28, 2014, 03:22:48 AM

Good I have the 50% off discount.


 :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 28, 2014, 03:39:56 AM

Good I have the 50% off discount.


 :think:
I am a leatherman pro. ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 28, 2014, 03:43:39 AM

Good I have the 50% off discount.


 :think:
I am a leatherman pro. ;)

What the?!

How why where? I want a fiddy percent discount!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 28, 2014, 06:34:03 AM
Healed, it was a deep cut.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 28, 2014, 07:26:36 AM


The skele is doing fine.

The fine phillips bit has proved it self as a perfect battery hatch opener on toys.


Which fine phillips? The one that comes with the Skelly or something you got from somewhere else?

One of the most important uses from my tools according to my spoiled daughter.

The original one. It works well on smaller screws than it looks.


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 28, 2014, 07:27:49 AM


The skele is doing fine.

The fine phillips bit has proved it self as a perfect battery hatch opener on toys.


Which fine phillips? The one that comes with the Skelly or something you got from somewhere else?

One of the most important uses from my tools according to my spoiled daughter.

The original one. It works well on smaller screws than it looks.


Sent from a device made from star dust using tapatalk
Yup, it is call No.1  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 28, 2014, 07:34:39 AM


The skele is doing fine.

The fine phillips bit has proved it self as a perfect battery hatch opener on toys.


Which fine phillips? The one that comes with the Skelly or something you got from somewhere else?

One of the most important uses from my tools according to my spoiled daughter.

The original one. It works well on smaller screws than it looks.


Sent from a device made from star dust using tapatalk
Yup, it is call No.1  :tu:

I am being blonde today but what do you mean Kampfer?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 28, 2014, 07:35:52 AM
Phillips #1, read the marking on your bits. You do have Skelly on you, right?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 28, 2014, 07:37:27 AM

Healed, it was a deep cut.

Looks like it healed nicely. :tu:

MTO first aid rules if you cut your self:
1. Get camera/phone and take a picture of it.
2. Dress the wound
3. Post pics on MTO
4. Consider going to the doctor if its deep.

:D


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 28, 2014, 07:39:23 AM
 :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 28, 2014, 07:40:28 AM
Phillips #1, read the marking on your bits. You do have Skelly on you, right?

Oh you mean it is called #1.  :facepalm:


Healed, it was a deep cut.

Looks like it healed nicely. :tu:

MTO first aid rules if you cut your self:
1. Get camera/phone and take a picture of it.
2. Dress the wound
3. Post pics on MTO
4. Consider going to the doctor if its deep.

:D


Sent from a device made from star dust using tapatalk

This is so correct.  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 28, 2014, 07:48:47 AM
Healed, it was a deep cut.

Looks like it healed nicely. :tu:

MTO first aid rules if you cut your self:
1. Get camera/phone and take a picture of it.
2. Dress the wound
3. Post pics on MTO
4. Consider going to the doctor if its deep.

:D


Sent from a device made from star dust using tapatalk

This is so correct.  :tu:

I see no faults in these first aid rules. :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 28, 2014, 07:54:49 AM
Healed, it was a deep cut.

Looks like it healed nicely. :tu:

MTO first aid rules if you cut your self:
1. Get camera/phone and take a picture of it.
2. Dress the wound
3. Post pics on MTO
4. Consider going to the doctor if its deep.

:D


Sent from a device made from star dust using tapatalk

This is so correct.  :tu:

I see no faults in these first aid rules. :D

As a EMT, Combat Lifesaver and Red Cross CPR trained person I agree with your statement Breezy.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 28, 2014, 08:12:36 AM
Removed a old ski pass off wife's jacket today, easy job.
One cut of the steel wire then it is done.
Pliers are rarely needed, but it is nice to have.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 28, 2014, 08:51:05 AM
G'Day,

Day 28 with the Mighty MUT.

Today was a very busy day. We went to meet some old friends who live at Bondi Beech. Lunch was an old fashioned barbeque in a fire pit. My son and I made a good fire which took the better part of 2 hours to settle down in coals that were cool enough not to char grill the kebabs on first touch. Mostly bottle opening duties and cutting lemons to clean the bbq grids with. Quite a few friends admired the said MUT, but were baffled how the opener worked, until shown.

MUT was also called on to cut a xmas ginger stack cake. The biscuits were fantastic, I like ginger biscuits. No match for the sharp blade. I must say I'm very impressed with the edge and how it has been kept without me having to touch it up. A few picks of the biscuits...

Another three days, that all that is left folks.

Kampfer, good to see how the hand has healed so quickly. My doctor is more happy if I cut myself with a LM than a kitchen knife. It is nice straight cuts to stitch or glue closed.  :D

Have a good evening,

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 28, 2014, 09:51:18 AM
Healed, it was a deep cut.

Looks like it healed nicely. :tu:

MTO first aid rules if you cut your self:
1. Get camera/phone and take a picture of it.
2. Dress the wound
3. Post pics on MTO
4. Consider going to the doctor if its deep.

:D


Sent from a device made from star dust using tapatalk

This is so correct.  :tu:

I see no faults in these first aid rules. :D

As a EMT, Combat Lifesaver and Red Cross CPR trained person I agree with your statement Breezy.

thank you, sir. :salute:

although I already had a sneaking suspicion you would agree with me... :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 28, 2014, 10:00:43 AM
Have a good evening pietervn and other fighters on the other side of earth. I say good morning cause it`s 11.00 am here.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 28, 2014, 12:04:58 PM
Have a good evening pietervn and other fighters on the other side of earth. I say good morning cause it`s 11.00 am here.

Thanks Mate,

It is just after 22:00 here, off to bed.

Cheers

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 28, 2014, 05:27:38 PM
So the reputation of Skeletor has reached new heights.

Today while I was at work my bosses, bosses boss, a field grade Officer came to me looking for a MT.

Never did find out what he wanted to use it for but will just go with Skeletor prolly single handed saved Afghanistan and the war effort. Or maybe just helped with some minor task but I like answer one better so will go with that.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 28, 2014, 07:11:00 PM
 :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 28, 2014, 11:21:55 PM
Battery duty
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 29, 2014, 08:29:42 AM
G'Day,

Day 29 with the MUT

Today was a non-day for any MT duties. I carried the MUT the whole day but did not take it out at all for any duties.

Tomorrow I'm going on a bike trip through Goulburn and a couple of good back roads. The old bike has not had any riding since I got the R1200, and tomorrow seems like a good day to put some kms on. This time I'll remember the camera  :D

Enjoy the last couple of days of the challenge.

Cheers,

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Huntsman on December 29, 2014, 10:36:46 AM
Ok welcome to the coolest party on MTO as all the cool kids are here, along with a few haters. ;)

Thanks for letting me join in
Good luck with this post – It’s a bit long – Rather than making various posts throughout the month you get pretty much all of mine in one hit!!

My Skeletool Situation
I got my Skelly about 18 months ago.
Apart from presents I have given, it was my second Leatherman after my Wave
As I mentioned before - I really think it is the coolest tool - It often attracts comments and looks  8)

Pre Challenge thoughts
With all due respect to those who took part - I did not think that the recent minimalist challenge was a much of a challenge!! >:D Most people could get by taking out a layer or two out of their SAK, and if you need a bigger tool for work you probably could not join anyway. 
However I did not take part, or follow the event once it started – so I am sure there were plenty of hurdles for those who took part.
So will this be a challenge for me?  – You bet -  ;) Here’s why:
Although, now Summer is here, the Skelly is my tool of choice to take to the beach - Due to ease of cleaning/rinsing off after sand, sea water etc
So overall this will be a real challenge for me  … Hmmmm -   :think: Ah yes – That is what it’s meant to be!!  :) - And that is why I joined!!  :D – Should be interesting.  ???

Initial reaction – Day 1
Very good. In terms of weight and pocketability, I have surprised myself – It really is nice to carry, although the blade does look, and feel, a bit more ‘aggressive’ than a SAK.

Intra Challenge report
Overall I am liking carrying the Skelly, it is performing well on pretty much all day to day activities, and of course it is great having a full sized pair of pliers in my pocket. And I love opening my beers with the Skelly
It has helped with the usual cutting and screwing (ahem) activities, and also a bit of restoration work on an old wardrobe I am working on, and also sorting out a clogged drain in my bathroom. I have even managed to do some cutting tasks, for which I would usually use scissors, with the Skelly blade. And on one occasion I was cutting rope, so the serrated blade was even better than PE or scissors.

Skelly ‘misses’/fails
The Skelly was challenged on the following occasions:
So that’s it – Hope you got this far - Maybe one more post before the end!! :salute:[/list]
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Etherealicer on December 29, 2014, 12:20:07 PM
[...]
  • This one really surprised me. When I eat an apple I always cut it up and de-core it with my SAK. The SAK blade cruises through the apple’s flesh. The Skelly really struggled – Well at least compared to the SAK. I think the concave blade and thick spine are the reason for this, possibly even the smoothness of the SAK blade. What a surprise, as I always thought of the Skelly blade, as more aggressive and sharp compared to a SAK blade!!
[...]
I'm still contemplating if I should replace my folder with a Skelly to complement my CyberTool but this I find worrisome. I would have expected it to shine at that task.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 29, 2014, 03:05:33 PM
[...]
  • This one really surprised me. When I eat an apple I always cut it up and de-core it with my SAK. The SAK blade cruises through the apple’s flesh. The Skelly really struggled – Well at least compared to the SAK. I think the concave blade and thick spine are the reason for this, possibly even the smoothness of the SAK blade. What a surprise, as I always thought of the Skelly blade, as more aggressive and sharp compared to a SAK blade!!
[...]
I'm still contemplating if I should replace my folder with a Skelly to complement my CyberTool but this I find worrisome. I would have expected it to shine at that task.

I really like the Skeletool, I do.

While the weight and small size are great not to mention how tough the little thing is. Has just the tools you need most and nothing you do not. Blade that is easy to use one handed and fits your hand nice when the blade is deployed.

Replace your dedicated knife or even a Wave/Surge blade, not a chance. The Skelly knife is good enough, but to small and thick to be a real good slicer imo.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 29, 2014, 10:39:24 PM
It did this all day
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 29, 2014, 10:49:36 PM
It does that well.   ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 30, 2014, 12:52:03 AM
It did this all day
If it doesn't do that well then it is useless.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 30, 2014, 02:04:26 AM
It did this all day
Is there a way to get the clip to have more holding pressure.? Mine slips out a little too easily, way less pressure than a wave pocket clip, at least on this one. It fell out f my pocket in my truck earlier ???
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 30, 2014, 02:26:42 AM
I was wondering if some skate board tape on the handle would help or on the back of the clip
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 30, 2014, 02:37:47 AM
Skateboard tape? Like the grip tape stuff
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 30, 2014, 02:54:03 AM
It did this all day
Is there a way to get the clip to have more holding pressure.? Mine slips out a little too easily, way less pressure than a wave pocket clip, at least on this one. It fell out f my pocket in my truck earlier ???

Mine is loose like that also. Never had it fall out while wearing my pats but a few times it has while off.

Just take the clip off and bend it in some to make it tighter. Havenot done mine cause I am lazy and like I said only falls out when I am naked.  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on December 30, 2014, 03:18:41 AM
It did this all day
Is there a way to get the clip to have more holding pressure.? Mine slips out a little too easily, way less pressure than a wave pocket clip, at least on this one. It fell out f my pocket in my truck earlier ???

Mine is loose like that also. Never had it fall out while wearing my pats but a few times it has while off.

Just take the clip off and bend it in some to make it tighter. Havenot done mine cause I am lazy and like I said only falls out when I am naked.  :whistle:

Not hating ... honest ... but that was something I noticed on the Skele too, that and the fact it sits so high when clipped. For the wierdos that actually like the Skele (you strange people you  :pok:) :P I wish the clip was deeper carry and/or you could put a long lanyard at the same end to do the belt loop paracord trick that so many folks do with SAKs for extra security ...  but lanyards are most practical on the wrong end of the tool as it stands. Whilst the tool doesn't work for me at all, it would be nice to see better rentention for those that get along with it. The ride height was actually one of the many factors which made me prefer the Octane.

Maybe this would be a good time for Harley to quit talking and start doing  :pok: and get his modding vibe going, and conjure up a solution to the problem  :P

Congrats to all those who have lasted so long on this challenge BTW  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 30, 2014, 03:32:43 AM
It did this all day
Is there a way to get the clip to have more holding pressure.? Mine slips out a little too easily, way less pressure than a wave pocket clip, at least on this one. It fell out f my pocket in my truck earlier ???

Mine is loose like that also. Never had it fall out while wearing my pats but a few times it has while off.

Just take the clip off and bend it in some to make it tighter. Havenot done mine cause I am lazy and like I said only falls out when I am naked.  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 30, 2014, 03:39:27 AM
I have never had an issue with it falling out or not riding deep enough.
(I'm talking about the Skeletool by the way.)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 30, 2014, 03:45:15 AM
I have never had an issue with it falling out or not riding deep enough.
(I'm talking about the Skeletool by the way.)

Riiight.

It did this all day
Is there a way to get the clip to have more holding pressure.? Mine slips out a little too easily, way less pressure than a wave pocket clip, at least on this one. It fell out f my pocket in my truck earlier ???

Mine is loose like that also. Never had it fall out while wearing my pats but a few times it has while off.

Just take the clip off and bend it in some to make it tighter. Havenot done mine cause I am lazy and like I said only falls out when I am naked.  :whistle:

Not hating ... honest ... but that was something I noticed on the Skele too, that and the fact it sits so high when clipped. For the wierdos that actually like the Skele (you strange people you  :pok:) :P I wish the clip was deeper carry and/or you could put a long lanyard at the same end to do the belt loop paracord trick that so many folks do with SAKs for extra security ...  but lanyards are most practical on the wrong end of the tool as it stands. Whilst the tool doesn't work for me at all, it would be nice to see better rentention for those that get along with it. The ride height was actually one of the many factors which made me prefer the Octane.

Maybe this would be a good time for Harley to quit talking and start doing  :pok: and get his modding vibe going, and conjure up a solution to the problem  :P

Congrats to all those who have lasted so long on this challenge BTW  :cheers:

Quiet you!

I do have a set of T-10 security bits on the way for modding.

Not sure I will mess with the Skelly clip though. I dig the looseness of the clip. Makes it easier to put in and pull out.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on December 30, 2014, 03:49:07 AM
I have never had an issue with it falling out or not riding deep enough.
(I'm talking about the Skeletool by the way.)

Thank goodness! There are certain tools that should never have a lanyard attached  :ahhh :ahhh
If you need to tie a piece of string to THAT to find it/get it out, then you have my deepest sympathies   :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on December 30, 2014, 05:44:06 AM
I have never had an issue with it falling out or not riding deep enough.
(I'm talking about the Skeletool by the way.)

Thank goodness! There are certain tools that should never have a lanyard attached  :ahhh :ahhh
If you need to tie a piece of string to THAT to find it/get it out, then you have my deepest sympathies   :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 30, 2014, 09:49:26 AM
Is there a way to get the clip to have more holding pressure.? Mine slips out a little too easily, way less pressure than a wave pocket clip, at least on this one. It fell out f my pocket in my truck earlier ???

The MUT cousin is quite the opposite. Once in the pocket it is damn near impossible to get out. There is virtually no give in the MUT clip. I have ripped a pocket already of the 1/2 jean. I only use a pouch now when carrying the MUT.

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 30, 2014, 09:57:01 AM
G'Day,

The second last day of the challenge...

Today was a quiet traveling day for the MUT. I rode with the wife and kids down to Gouldburn to see them off for a 5 day break. The bike went fine, but the wind was something else. I took the short trip home, traveling into the wind on the highway filled with holiday trucks was close to impossible, even for a 300kg motorcycle. Sometimes self preservation is priority.

In Australia there are a few Big Things scattered around the country. Goulburn has the Big Marino. Pic included.

Other than that no duties for the MUT.

Cheers,

Pete

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on December 30, 2014, 11:18:00 AM
The "carriability" is not to be laughed at, its the main role it will fullfill till its needed.

I tried to use the Skelly for some work at home and got to know of all its limitations.

Job was to install a new bulkhead light by the pool (summer now, swimming into the evenings)

Took the covers off and found the mounting screws had rusted solid.
(http://i11.photobucket.com/albums/a200/shark_za/SAK/IMG_0030_zpsfeaf4268.jpg) (http://s11.photobucket.com/user/shark_za/media/SAK/IMG_0030_zpsfeaf4268.jpg.html)

Sprayed with Q20 and tried the Skelly. It would not budge using the handle straight (pliers to bit adapter side)
Tried the 90 degrees with one handle, he started twisting and creaked just a smidgeon.
(http://i11.photobucket.com/albums/a200/shark_za/SAK/IMG_0036_zpse50792f8.jpg) (http://s11.photobucket.com/user/shark_za/media/SAK/IMG_0036_zpse50792f8.jpg.html)

So to test I got out my Blast and could not do any better.  Got a dedicated large driver and could not budge the screws (complicated by the height above the ground)
So used the skelly blade to cut the fitting off the bolts, then used the skelly pliers to twist them.
This worked ok but I got to feel the "hotspots" on the skelly as I had to really grip them tight.
(http://i11.photobucket.com/albums/a200/shark_za/SAK/IMG_0038_zps4de5892e.jpg) (http://s11.photobucket.com/user/shark_za/media/SAK/IMG_0038_zps4de5892e.jpg.html)

In the end the Skelly did the whole task but with a lot of drama and compromise.
This was probably Supertool 300 territory but managed to get it done by destroying the fitting.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Huntsman on December 30, 2014, 12:03:16 PM
I'm still contemplating if I should replace my folder with a Skelly to complement my CyberTool but this I find worrisome. I would have expected it to shine at that task.
Still a good combo I'd say EA.
And you have the choice of SAK blade or combi Skelly blade - assuming you go for a regular Skelly. It really is a nice tool!
It did manage to cut the apple it just did not glide through!
And the Skelly blade is very sharp, holds and edge well, it's a bit more pointy than the SAK, so does have different uses.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 30, 2014, 04:42:18 PM
One more day until this challenge is done!!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 30, 2014, 07:57:36 PM
Lunch time
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 30, 2014, 08:02:58 PM
One more day until this challenge is done!!

Dang it really flew by for me.

Skelly is a good tool so that helped.

Next time we might have to do this with a rock or something. Make it more of a challenge.

Easy day for my Skeletool, all I used it for was opening some mustard packets for lunch.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 30, 2014, 08:14:20 PM

One more day until this challenge is done!!

Dang it really flew by for me.

Skelly is a good tool so that helped.

Next time we might have to do this with a rock or something. Make it more of a challenge.

How about 30days with a tool combo that costs less than $15?


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 30, 2014, 08:15:38 PM

One more day until this challenge is done!!

Dang it really flew by for me.

Skelly is a good tool so that helped.

Next time we might have to do this with a rock or something. Make it more of a challenge.

How about 30days with a tool combo that costs less than $15?


Dangit G what did I tell you about drunk posting?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 30, 2014, 08:23:45 PM


One more day until this challenge is done!!

Dang it really flew by for me.

Skelly is a good tool so that helped.

Next time we might have to do this with a rock or something. Make it more of a challenge.

How about 30days with a tool combo that costs less than $15?


Dangit G what did I tell you about drunk posting?

You wanted me to do it more often? :think:


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 30, 2014, 08:27:08 PM
 :facepalm:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on December 30, 2014, 08:33:39 PM

One more day until this challenge is done!!

Dang it really flew by for me.

Skelly is a good tool so that helped.

Next time we might have to do this with a rock or something. Make it more of a challenge.

How about 30days with a tool combo that costs less than $15?


Sent from a device made from star dust using tapatalk

I don't think I possess a SAK or MT that cost less than $15 :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 30, 2014, 08:37:04 PM
If it was $20 then the one legged Sidekick and Wingman people could play.

I know Lynn would want to participate with her new LLST.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 30, 2014, 08:44:55 PM


One more day until this challenge is done!!

Dang it really flew by for me.

Skelly is a good tool so that helped.

Next time we might have to do this with a rock or something. Make it more of a challenge.

How about 30days with a tool combo that costs less than $15?


Sent from a device made from star dust using tapatalk

I don't think I possess a SAK or MT that cost less than $15 :think:

I do have a couple of used GAKs that I bought for $10 each.


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on December 30, 2014, 08:45:32 PM
I think the only MT I have that was that cheap was an old Squirt S4 I got several months back.  Great little MT really, but no pliers.  Still, I got along fine (minus one time that I needed pliers) with only a Compact during that Minimalist challenge.  I would likely be fine with the S4 as well.  It actually has more tools than the Compact I think, or at least driver wise it does.  I haven't looked at it in a long time.  I don't know that I could commit to a single MT like that for a month though, after just getting a couple good ones out of storage recently ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 31, 2014, 12:28:39 AM
I got my freestyle for less than $10.. But I couldn't do another month with it or I'd probably go nuts.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 31, 2014, 02:57:57 AM

I don't know that I could commit to a single MT like that for a month though......


Ok now you are just messing with me?  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on December 31, 2014, 04:15:43 AM

I don't know that I could commit to a single MT like that for a month though......


Ok now you are just messing with me?  :pok:

Always Harley...always >:D  But no, I wouldn't want to carry the same MT for an entire month I don't think.  I'm pretty set on SAKs between the Rogueneer and Rogue, so MTs are my chance for variety in my EDC lineup.  I'm sure I could do it if it were a challenge, but it would depend on what one.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 31, 2014, 07:06:58 AM
It is coming to the end,  well done everyone.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 31, 2014, 08:29:36 AM
:ahhh :ahhh :ahhh


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on December 31, 2014, 09:37:39 AM
This is it  :cry: . Actually it has been fun all the month. Only thing what i missed a lot are scissors, anything else would be a bonus.
Probably one of today`s last activities is going to mount a new towel holder in to bathroom. pic no 1. The orig one broke and i decided to make a new one by myself  :D . It is made from stainless steel (aisi 304) and finishing is electrically polished.

Second pic is showing all the cap`s MUT had to deal with all the challenge along  :whistle:
Wish you all a nice end of the year and a better new one  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 31, 2014, 10:24:00 AM
You know those movies about a guy and girl who really don't get along, hate each other in fact... then by the end of the movie they are madly in love?

I can't help but think of them whenever Al posts in here...  :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on December 31, 2014, 11:08:45 AM
You know those movies about a guy and girl who really don't get along, hate each other in fact... then by the end of the movie they are madly in love?

I can't help but think of them whenever Al posts in here...  :whistle:

Sorry mate, I'm straight ....


 :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 31, 2014, 11:37:12 AM
You know those movies about a guy and girl who really don't get along, hate each other in fact... then by the end of the movie they are madly in love?

I can't help but think of them whenever Al posts in here...  :whistle:

Sorry mate, I'm straight ....


 :D
Ahhh, the denial continues...
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 31, 2014, 12:50:06 PM
G'Day,

Day 31, already. Yip, yes it is all over.

The challenge is coming to an end and so is 2014. Well at least for us "down under".

Thank you Kampfer for a very interesting challenge for possibly the most difficult month to use a minimalist tool. As many has posted, December is filled with tasks the Skele family could not cope with - naysayers. Well, I think we have proven them wrong!!! :pok: We have all missed some tools from our EDC, but this thread has shown how we can innovate if need be.

I chose the MUT for a few reasons:
-> Looks Cool
-> It is Batman's Tool (according to Leatherman's Aussie site)
-> Looks Very Cool
-> Has a hammer
-> Has a "poker"
-> Excellent pliers
-> Looks cool in BO
-> Great combo blade

It is not without its negatives:
-> Very heavy
-> Sparse tools for its size and weight
-> No leather sheath

I don't think that it can be a single EDC, even for the military focus it has. Being part of the challenge made me re-evaluate my tool use or tool carry. I like a scissors hence I carry tools that has a scissors in them. If I look at the Charge or Wave it is a full toolbox compared to the MUT, yet I could fulfill most of my requirements with the MUT. On occasion I had to look for dedicated tools to do the job, as I found early on trying to dismantle an old trellis. MT's have limits.

I think it is a good tool to take camping or to leave on a motorbike. If you combine it with a second MT or SAK I think you are sorted. I will still carry it from time to time, but for the next few days I think an Old Style Wave will get some use.

 :salute: Kampfer

 :cheers: and a Very Happy New Year!!!

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: derekmac on December 31, 2014, 02:26:50 PM
Well now that the challenge is over, I think I'm going to carry my Skeletool more now.  :facepalm:  I don't think I could have went the month without a SAK, which is why I didn't enter.

Good luck to everyone that did though!  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 31, 2014, 04:16:27 PM

-> It is Batman's Tool (according to Leatherman's Aussie site)


 :rofl: :rofl:

Is this true? That is funny I do not care who you are.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on December 31, 2014, 04:18:43 PM
Ending the challenge with a pop, literally.
The damn screw destroyed my new tire. :rant:
Now I have to get a new one.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 31, 2014, 04:23:08 PM
I feel like a kid on Christmas Eve as I sit here planning what I will carry tomorrow.

Skelly did well during the challenge but no matter how much you like green M&Ms sometimes you want to carry a SAK or Rebar or Wave or well you get the idea.

On the bright side Kampfer already has my address so that will save time when I win all the loots up in this smurf.

Well done everyone, I for one had a good time.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on December 31, 2014, 04:46:23 PM
Yep, so it turns out I like the Skeletool more than I expected to (I'd only had it for a few weeks before the challenge started).  The only tool I missed on a daily basis was scissors.  Of the tools the Skeletool did have, I didn't run into a problem with any of them (using dedicated tools when the job called for it helped).  So this one will see some more pocket time in the following months, and since I'll be able to pair it with a SAK with scissors, it should be a make a good setup.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on December 31, 2014, 04:49:41 PM
(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/hesrightyouknow.jpg~original)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 31, 2014, 06:07:36 PM
Used the skeletool to help make a sheath for my tomahawk.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on December 31, 2014, 06:10:09 PM
So far, I really like the Skeletool. It is by no means my Surge, but it has preformed rather well. Missed a lot of tools but only had to go back shop every now again.
All and all a good tool.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JAfromMn on December 31, 2014, 06:22:10 PM
Congratulations everyone who finished the challenge.

I enjoyed reading your posts

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kalans on December 31, 2014, 07:34:30 PM
Yes I truly enjoyed the read fellows, and I hope to enter a challenge at some point. Cheers!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on December 31, 2014, 08:41:57 PM
It has been a long hard month with the freestyle. The first thing I'm going to do after today is carry the biggest MT I can find. :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 31, 2014, 09:14:07 PM
My thoughts on the Skeletool after 31 days of use:
It has proved Itself as a very reliable tool that can really take a lot more than its is size would suggest. I was initially sceptical of the fixed bit driver, but it has proven itself as a very good tool. The cap lifter is excellent, and the blade is quite capable.
I havent had much use for the pliers, but they have worked well when I have used them.
The only drawbacks I have found is that the ergonomics are not the best when using a bit of force, and the wheight is a little high considering how few tools it have. 

Thanks for giving me this opurtunity to get to know the Skeletool Kampfer! :salute:


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: NKlamerus on December 31, 2014, 09:47:51 PM
So what's the next challenge? Is this a monthly thing? (Noob Status)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 31, 2014, 09:57:14 PM

So what's the next challenge? Is this a monthly thing? (Noob Status)

Its 30 days with a tool combo worth less than $15. And you will be the only one participating


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on December 31, 2014, 10:03:49 PM
I have really enjoyed seeing everyone's thoughts on the Skeletool (and its cousins) during this challenge, and I've especially enjoyed seeing some of the doubters come around to realize what a great little tool the Skeletool is. :cheers: since I'm mostly a desk jockey/lab rat during the work week, I was especially impressed by the guys who have a much higher demand of their MT than I do on a daily basis -- I'm looking at you, ducttapetech and colt 1911. :salute:

I got my Skeletool CX when it first came out in 2008 and EDC'd it for about 4 years, so I wasn't necessarily worried that I'd feel like I was lacking tools during this challenge. the weekends were more of a challenge for me, since I usually carry a larger tool when I'm working on home/yard projects, but the hardest part for me was not being able to carry any of my beloved mods for a month. :facepalm:

as the year (and the challenge) wind down tonight, my CX will still be with me, although I don't expect much of him tonight, other than opening a few beverages for me. :D

Kampfer, thanks again for hosting this challenge, and thanks to all those who participated! :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: NKlamerus on December 31, 2014, 10:04:34 PM

So what's the next challenge? Is this a monthly thing? (Noob Status)

Its 30 days with a tool combo worth less than $15. And you will be the only one participating


Sent from a device made from star dust using tapatalk
Why is that? Everyone else spend too much money? :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on December 31, 2014, 10:07:57 PM


So what's the next challenge? Is this a monthly thing? (Noob Status)

Its 30 days with a tool combo worth less than $15. And you will be the only one participating


Sent from a device made from star dust using tapatalk
Why is that? Everyone else spend too much money? :D

Harley wanted a real challenge. A $15 tool is too fancy for him though, so he is doing it with a rock.  :D


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on December 31, 2014, 10:17:22 PM
Yeah, thanks for the challenge Kampfer. Although mine didn't see as much use as others I enjoyed participating and seeing how everyone was coping.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 31, 2014, 11:32:15 PM

-> It is Batman's Tool (according to Leatherman's Aussie site)


 :rofl: :rofl:

Is this true? That is funny I do not care who you are.

Indeed, have a look at this link:  http://www.leatherman.com.au/product/MUT
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on December 31, 2014, 11:34:32 PM
Finished out by opining a new laptop
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on December 31, 2014, 11:40:56 PM
I feel like a kid on Christmas Eve as I sit here planning what I will carry tomorrow.

All these choices, I'll be carrying the Old Wave for a few days

Skelly did well during the challenge but no matter how much you like green M&Ms sometimes you want to carry a SAK or Rebar or Wave or well you get the idea.

On the bright side Kampfer already has my address so that will save time when I win all the loots up in this smurf.

 :rofl:

Well done everyone, I for one had a good time.

Me too, reading each day what we were up too was the best, and off course using the tool
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 01, 2015, 02:31:03 AM
Feeling a little sick, use Skelly to slide up and smash some ginger for tea. I still have six hours to go.

Thanks for playing everyone.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Huntsman on January 01, 2015, 03:19:21 AM
 We finished 13 hours ago in this side of the world!!  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 01, 2015, 03:27:26 AM
Winner would be annunciated in 330 minutes.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 01, 2015, 03:29:49 AM
We finished 13 hours ago in this side of the world!!  :cheers:
*ahem* 15 hours ago for some...
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on January 01, 2015, 03:32:12 AM


So what's the next challenge? Is this a monthly thing? (Noob Status)

Its 30 days with a tool combo worth less than $15. And you will be the only one participating


Sent from a device made from star dust using tapatalk
Why is that? Everyone else spend too much money? :D

Harley wanted a real challenge. A $15 tool is too fancy for him though, so he is doing it with a rock.  :D


Feel like the little guy from Despeable Me, Whhhhaaaat?!

We finished 13 hours ago in this side of the world!!  :cheers:

Yep. I am all up in my Little Boy, Spyderco Military and SAK Yeoman carry day.  :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 01, 2015, 03:35:08 AM
So what's the next challenge? Is this a monthly thing? (Noob Status)
You can host one if you like. :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Huntsman on January 01, 2015, 03:40:23 AM
Final thoughts from me....
Not much to add from my big post a couple of days ago...

If the objective of the challenge was to convert me to the Skelly as EDC. It failed.  :(
If its objective was to open my eyes to the world outside of the SAK as an EDC and get up close and personal with the Skelly - It was a great sucess.  :D

Great fun overall, I missed the scissors, toothpick, file etc but no real performance issues, or things I just could not do, and it felt good to have the tough little Skelly in my pocket.
However I am glad to have a choice again, and I am really looking forward to having a SAK back in my pocket.
Although I will carry the Skelly from time to time as an EDC.

Thanks Kampf for the proposal and putting us all up to it.

 
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Huntsman on January 01, 2015, 03:45:38 AM
We finished 13 hours ago in this side of the world!!  :cheers:
*ahem* 15 hours ago for some...

You know I nearly said that - as I do spend quite a bit of time in NZ - and I guess we are still 'on the same side of the world'!!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: geekdadrepair on January 01, 2015, 04:39:59 PM
I had fun carrying mine. I will continue to do so, but probably add a compact or Micra or something to supplement. I was lacking for scissors or a smaller driver at times.

Sent from my Nexus 7 using Tapatalk

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on January 01, 2015, 05:12:07 PM
I had fun carrying mine. I will continue to do so, but probably add a compact or Micra or something to supplement. I was lacking for scissors or a smaller driver at times.

Sent from my Nexus 7 using Tapatalk

This.

Skelly plus a SAK for a thin slicer, scissors and openers make for a great combination.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 01, 2015, 06:15:49 PM
My Skeletool Challenge after action report:
Skeletool was my main EDC tool before the challenge for four months, so this challenge did not bring me any surprising result, but allow me to summary.

Skeletool is a good looking, tough little light weight tool equips with few, but frequently use functions, and each of them perform exceptionally well.

Knife: The OHO locking blade is very sharp and effect regardless it is made of 420HC or 154CM, the length is short but sufficient for daily cutting tasks. The half serrated half pain edge variant is NOT favorited by many. While the blade is robust, it is not too good at sliding through material due to its thick spine.

Drivers: Skeletool uses Leatherman's bit holder system, with the on board bit storage, it can carry up to four different type/size screw drivers of your choice. While ergonomics isn't great, using it in the correct configuration (pliers head on driver side of handle) is not a big issue for occasionally uses. When dealing with stubborn screws, using Skeletool in “T-Handle” configuration would greatly increase its ability to turn them.

Pliers: Light duty pliers perform as I expect them to, no breakage so far.

Carabineer: It is the most iconic feature of the entire Skeletool family, however I have not found any practical uses for Skeletool’s Carabineer, but it does perform very well as a cap lifter.

Pocket Clip: What good is a multi-tool to you if you don’t have it with you? Skeletool is light and thin, with pocket clip it is very easy and comfortable to carry in pocket 24/7.

Limitation & Recommendation: Team up with another small multi-tool to gain what Skeletool lacks of, scissors; if scissors are what you use frequently.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 01, 2015, 06:23:14 PM
A VIP agreed to draw out a winner after this challenge is completed.

Quote from: Glenn Klecker
I wish my real job was this easy. I used a random number generator and came up with "12". I hope that helps. It's easier than writing all the numbers on ping pong balls and drawing one.

Quote from: Kampfer
As the challenge coming to completion, please draw out a winner from the list below. Thank you and we love the Skeletool you designed.
01 - Kampfer, Skeletool X
03 - Breezy12, Skeletool CX
04 - HarleyXJGuy, Skeletool
06 - colt 1911, Skeletool
07 - eddie1115, Skeletool
08 - pietervn, BO MUT
09 - geekdadrepair, SkeleVerde
10 - AdmSlc, Freestyle CX
11 - Timboslice, Skeletool
12 - getahl, Style CS
13 - Grathr, Skeletool
14 - Ductapetech, Skeletool CX
15 - Syncop8r, Skeletool CX
16 - kmfdm, MUT
17 - Huntsman, Skeletool

Congratulations getahl!
I hope your baby girl is doing well. PM me your address when you have a chance.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: kmfdm on January 01, 2015, 06:37:50 PM
Congratulations getahl!  :cheers:

My skeletool was a combo pack! This probably was the scissors lack thing and family member usually stick together  :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on January 01, 2015, 06:48:56 PM
Congrats getahl and thanks for the giveaway Kampfer :)

Sent from my XT901 using Tapatalk

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AdmSlc on January 01, 2015, 06:51:08 PM
Congrats!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on January 01, 2015, 07:55:15 PM
a great ending to a great challenge! :cheers:

getahl, congratulations on the new tools, and best wishes to you and your family, especially the newest member. :hatsoff:

Kampfer, thanks again for hosting such a fun challenge. :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: geekdadrepair on January 01, 2015, 07:55:41 PM
Congrats!

Sent from my Nexus 7 using Tapatalk

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 01, 2015, 08:02:49 PM
Thanks for playing everyone and thanks to Glenn for drawing a winner.

I had fun, and hope to host more challenges in future, let's find out what else Al hates. :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on January 01, 2015, 08:25:27 PM
Congrats!
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on January 01, 2015, 08:37:56 PM
Great write up Kampfer, exactly what I was thinking but not eloquent enough to write.

Congrats Getahl glad you won. A perfect ending to a fun "challenge" look forward to the next one.

And no I am not carrying a rock for a month!  :twak:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 01, 2015, 08:56:42 PM
Congratulations getahl!
Thanks again for hosting Kampfer!
And thanks Glenn, not only for drawing the winner but more importantly for designing such a cool little tool!

I had fun, and hope to host more challenges in future, let's find out what else Al hates. :D
I'm still expecting him to announce that he has now fallen in love with the Skeletool after so much denial.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on January 01, 2015, 10:05:48 PM
Congrats Gethal!
Thanks for the great challenge and GAW Kampfer!




Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 01, 2015, 10:07:40 PM
My conclusion:
(http://forum.multitool.org/index.php?action=dlattach;topic=55539.0;attach=137721;image)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 01, 2015, 11:36:49 PM
For those who really want scissors:

http://forum.multitool.org/index.php/topic,37093.msg596403.html#msg596403
http://forum.multitool.org/index.php/topic,20842.0.html
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: babola on January 02, 2015, 02:14:46 AM
For those who really want scissors:

http://forum.multitool.org/index.php/topic,37093.msg596403.html#msg596403
http://forum.multitool.org/index.php/topic,20842.0.html

Evil was a true craftsman and an artist.

Shame we lost him to another hobby, place or obsession... :(
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on January 02, 2015, 02:55:58 AM
So,  that's THEEE ' EVIL' I've come across a few of his creations here, was hoping he would post so I could pick his brain. I really liked those custom bit holders he came up with.
Also, thanks Kampfer for putting a name to the creator of this tool and other features of our tools we take for granted. It was a good history lesson, should have its own bookmark or section btw. Like a forefather section haha,
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 02, 2015, 04:21:34 AM
http://skeletool.com/
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: JBW1 on January 02, 2015, 04:24:53 AM
Thanks for that sir :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Timboslice on January 02, 2015, 05:10:23 AM
Congratulations
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: getahl on January 02, 2015, 11:59:07 AM
Thank you fire the well wishes, all; it means the world to me.We're back in the hospital for cholangitis. Yay, 2:00 am Zosyn infusion. Emily's liver numbers and bilirubin level are looking good, and her color is back to normal. Four weeks ago, she looked like a Simpsons character. Should be out on Wednesday, if all goes well.

Wow, didn't actually expect to win the pot, but I can't accept the prize. I hardly stuck through with the challenge. My carry throughout December has mainly been the Classic I used in the October challenge, with a Micra here and there, and a CRKT Minimalist I picked up from Lowe's. While I'm honored to say I was selected, I can hardly claim the prize in good conscience. Please re-roll the dice.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 02, 2015, 07:32:33 PM
Getahl,
First we are glad to hear your baby is doing better and full recovery is near.
Second, I am sorry to know you violated the rules of this challenge; and thank you for being honest.

Now you leave me with a difficult decision to make ; I like all challengers to help me out on making it.
I personally believe that the next winner drew out would still rather have me send the prize to you.
So let us hear from the challengers.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on January 02, 2015, 08:01:19 PM
While I didn't participate in this challenge, I would agree with Kampfer's suggestion to give the prize to getahl :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on January 02, 2015, 08:35:07 PM
Getahl,
First we are glad to hear your baby is doing better and full recovery is near.
Second, I am sorry to know you violated the rules of this challenge; and thank you for being honest.

Now you leave me with a difficult decision to make ; I like all challengers to help me out on making it.
I personally believe that the next winner drew out would still rather have me send the prize to you.
So let us hear from the challengers.

I discussed this with ducttapetech and colt 1911 a couple weeks ago while the challenge was still running, and all 3 of us agreed to give the prize to getahl if we should be lucky enough to win. :salute:

getahl, I would like to echo what Kampfer said -- we are VERY glad to hear that your little one is doing so much better and on the road to full recovery. your honesty is appreciated, but I certainly didn't expect you to complete this challenge when you had so much more important matters to worry about. I just thought that Kampfer's generous prize package would be a nice pick-me-up for you during this difficult time. :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Grathr on January 02, 2015, 08:40:04 PM

While I didn't participate in this challenge, I would agree with Kampfer's suggestion to give the prize to getahl :tu:

+1
send it to getahl. :tu:


Sent from a device made from star dust using tapatalk
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: eddie1115 on January 02, 2015, 08:43:18 PM
I also agree that getahl should get it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: SteveC on January 02, 2015, 08:51:35 PM
You guy's are all class acts   :salute:

getahl, glad to hear that your kiddo is doing better !!!
all the best
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 02, 2015, 09:38:50 PM
getahl, I hope everything gets better from here in.

Kampfer, send the prize to getahl. We can't risk another draw and Harley getting it.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 02, 2015, 09:50:56 PM
We can't risk another draw and Harley getting it.
:rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 02, 2015, 09:52:37 PM
I bet I'm on "The List" now (if I wasn't already).
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on January 02, 2015, 09:54:42 PM
I bet I'm on "The List" now (if I wasn't already).

Many of us have been put on Harley list at this point I think :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 02, 2015, 09:56:14 PM
but I can't accept the prize.
We are not sending you a prize (you disqualified), but we are sending you a gift.  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on January 02, 2015, 10:01:53 PM
Send it to Getahl.

Nate

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 02, 2015, 10:03:23 PM
I'd like to see Harley's list - perhaps he should put it up in The Break Room.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Breezy12 on January 02, 2015, 10:05:04 PM
but I can't accept the prize.
We are not sending you a prize (you disqualified), but we are sending you a gift.  :cheers:
:tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: getahl on January 03, 2015, 12:45:59 AM
Wow, you guys rock! Thank you all so much, especially for the well wishes and good vibes. Just further evidence that this really is the best place on the net.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on January 03, 2015, 03:01:25 AM
So glad to hear your little one is doing better Getahl.

Hmm I guess my record keeping has not been so good as far as The List goes. All I know for sure is Monrogue is at the top with a bullet.  :twak:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on January 03, 2015, 03:07:02 AM
So glad to hear your little one is doing better Getahl.

Hmm I guess my record keeping has not been so good as far as The List goes. All I know for sure is Monrogue is at the top with a bullet.  :twak:

I figured as much :whistle:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Huntsman on January 03, 2015, 11:50:43 PM
Having the Supertool go to Getahl sounds like a great result to me!  :D Nice one
And I hope Emily's recovery continues well - What a tough start to life - And very upsetting for you and the family - So happy all is going well now for you.

I have to declare myself out of the challenge anyway as I failed three times. Once by accident, once intentionally and once debateable:

Carabineer: It is the most iconic feature of the entire Skeletool family, however I have not found any practical uses for Skeletool’s Carabineer, but it does perform very well as a cap lifter.

I do  bit of rock climbing and bought the Skelly to hang on my climbing harness.
 - As many will know - all climbing gear attaches to the gear loops on a harness with carabineers, so the Skelly is ideal.
Pliers are certainly not essential for climbing - but could come in handy.
I guess construction workers/window cleaners, who work with ropes on the outside of buildings, and wear harnesses, would also find this tool and its attachment method handy?

Thanks fire the well wishes, all. It's not going to be a fun ride.

Anyway, sorry for the derailment, here's my carry fit December, an early model Style CS, with the speed holes (bonus points for those who get the reference), that I used a diamond sharpener on to add a v-grind to the blade. There's something about coal grinds that drives me nuts.
The Simpsons! When Homer is buying a new car and the mob are shooting at him.
Good man

Sorry I still don't get it - Speed holes? - Can you explain please ? - Although I am not a Simpsons watcher - so it may all be lost on me.  :(
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: getahl on January 04, 2015, 01:34:34 AM
No worries, Huntsman. There's an episode, and someone please correct me if I'm remembering incorrectly, where Homer is being targeted by a hitman. He's at a car dealership talking to a salesman when they start shooting at him, hitting the hood of the cat instead. The salesman says they're speed holes! Later, he's in his garage, hitting his purple station wagon with a pickaxe when Flanders wanders in and asks what he's doing; adding speed holes to his car, of course!

I'm sure it loses something when trying to describe it. Heck I probably got out mostly wrong.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 04, 2015, 06:26:48 AM
So it is useful during rock climbing, as I suspected, that is why I didn't say it is useless.
I guess one can hang skeletool off the belt loop, but why would anyone wants a 5oz metal bangs around all day long. However, for smaller tools like Style Cs, Ps this would be a good option?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: trickknife on January 04, 2015, 06:52:46 AM
I agree, give it to Getahl.

- Glenn K
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: pietervn on January 04, 2015, 07:15:08 AM
Congrats Getahl,

Glad to hear the little one is doing well.

Cheers,

Pete
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 04, 2015, 11:34:29 AM
No worries, Huntsman. There's an episode, and someone please correct me if I'm remembering incorrectly, where Homer is being targeted by a hitman. He's at a car dealership talking to a salesman when they start shooting at him, hitting the hood of the cat instead. The salesman says they're speed holes! Later, he's in his garage, hitting his purple station wagon with a pickaxe when Flanders wanders in and asks what he's doing; adding speed holes to his car, of course!

I'm sure it loses something when trying to describe it. Heck I probably got out mostly wrong.

Sounds about right to me. Was it because he owed them money?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: getahl on January 04, 2015, 06:22:49 PM
No worries, Huntsman. There's an episode, and someone please correct me if I'm remembering incorrectly, where Homer is being targeted by a hitman. He's at a car dealership talking to a salesman when they start shooting at him, hitting the hood of the cat instead. The salesman says they're speed holes! Later, he's in his garage, hitting his purple station wagon with a pickaxe when Flanders wanders in and asks what he's doing; adding speed holes to his car, of course!

I'm sure it loses something when trying to describe it. Heck I probably got out mostly wrong.

Sounds about right to me. Was it because he owed them money?
Honestly, can't remember. I'm trying to remember details of the episode and I can't help but think of the early Family Guy ep with Fat Pauly.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 05, 2015, 05:32:44 PM
I agree, give it to Getahl.

- Glenn K
Thanks Glenn. Good to have you watching us during the challenge.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on January 05, 2015, 08:33:08 PM
I agree, give it to Getahl.

- Glenn K
Thanks Glenn. Good to have you watching us during the challenge.

Rick is Glenn?  :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: enki_ck on January 05, 2015, 08:38:50 PM
I agree, give it to Getahl.

- Glenn K
Thanks Glenn. Good to have you watching us during the challenge.

Rick is Glenn?  :think:

Yup, well we did say he was a long time member. :)

Thanks for the help with the draw, Glenn. :hatsoff:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 05, 2015, 09:04:38 PM
Wait... who is Rick?  :think:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on January 05, 2015, 09:09:01 PM
Wait... who is Rick?  :think:

Judging by his early posts, someone who doesn't know a great deal about the Skeletool ... even though in his last post he appears to be the creator of the tool. Glad to see I'm not the only one who is confused
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Huntsman on January 05, 2015, 11:21:57 PM
No worries, Huntsman. There's an episode, and someone please correct me if I'm remembering incorrectly, where Homer is being targeted by a hitman. He's at a car dealership talking to a salesman when they start shooting at him, hitting the hood of the cat instead. The salesman says they're speed holes! Later, he's in his garage, hitting his purple station wagon with a pickaxe when Flanders wanders in and asks what he's doing; adding speed holes to his car, of course!

Aha - I get it - 'Speed holes' in the car to decrease wind resistance and therefore increase speed  :D
I will remember next time I use my Skelly
Thanks
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 05, 2015, 11:27:55 PM
Wait... who is Rick?  :think:

Judging by his early posts, someone who doesn't know a great deal about the Skeletool ... even though in his last post he appears to be the creator of the tool. Glad to see I'm not the only one who is confused
So AL, what is your conclusion from overlooking the entire challenge?
Did it change your view on Skelly at all?
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: AimlessWanderer on January 06, 2015, 12:19:20 AM
Wait... who is Rick?  :think:

Judging by his early posts, someone who doesn't know a great deal about the Skeletool ... even though in his last post he appears to be the creator of the tool. Glad to see I'm not the only one who is confused
So AL, what is your conclusion from overlooking the entire challenge?
Did it change your view on Skelly at all?

Not in the slightest.

I still think the ergonomics of the tool are awful, both in pliers and driver mode. I still don't like how high the tool sits in the pocket either. For me personally the Skeletool is probably one of the worst tools I have tried - certainly from one of the major players anyway. Other people opinions of the tool will not change my first hand experience of it. There really is nothing about the tool that appeals to me.

However, I still stand by the fact that people need to form their own conclusions about tools, because other people may approach this and indeed other tools, from a very different perspective. I have actually previously recommended that people try a Skelly - certainly at least try to handle one in a store or borrow one from a friend - and I will probably do so again in the future. Just because I can find no redeeming features about the tool whatsoever, doesn't mean that someone else won't fall in love with it and believe it to be perfect for their needs ... or find themselves anywhere inbetween the two standpoints. If someone feels that tool is perfect for their needs, I am happy they've found a tool that works for them

The only thing I try to do when someone is being recommended a tool that I have issues with (not just this one, any tool), is to reiterate my personal views on it so that the person asking for recomendations is given a balanced spectrum of response. The noobs come to us for unbiased opinion, and if they start getting biased opinion, it needs balancing out or we're not doing our job right. Even if it's not a direct recommendation, we should consider the lurkers and those just passing through. If someone does a search on Google and happens upon a thread where everyone is singing the praises of a tool, and nobody has anything cortradictory to say, they might end up buying something completely unsuitable for them. If that thread has a balance of views, that person has got a better insight into the tool

I might have other opinions and things I want to say, but not until there is some clarification as to the above confusion. I find that little revelation of "one guy knowing little about a tool, then magically becoming a totally different guy who actually created the tool" quite unsettling .... makes me wonder if there's anything else we ought to know.

Anyway, time for bed here ... catch you all later  :salute:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: enki_ck on January 06, 2015, 12:50:21 AM
Wait... who is Rick?  :think:

Judging by his early posts, someone who doesn't know a great deal about the Skeletool ... even though in his last post he appears to be the creator of the tool. Glad to see I'm not the only one who is confused

Well can't blame a guy for taking an alias on a forum full of multitool nuts. ;)

Yes, he's Glenn, seen here next to a random guy off the internets. :whistle:

He also kindly donated the Trigger Knife Kits a few of you guys got for our last anniversary. :D

(http://gallery.multitool.org/pbmirror/People/Glenn.jpg)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on January 06, 2015, 03:57:42 AM
Wow, that is one dapper gentleman shaking Glenn's hand ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on January 06, 2015, 04:55:00 AM
Glenn should sign some Skellys so we can make some collector types wet themselves.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Huntsman on January 06, 2015, 09:22:01 AM
Looks like 50ft-Trad got to Glen/Rick before Grant did as he has a knife sticking out of his neck :o
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 06, 2015, 09:55:36 AM
Well I just scanned through all 40-odd pages of this thread and couldn't see anyone called Rick.
I also have really sore eyes.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: derekmac on January 06, 2015, 02:52:06 PM
He also kindly donated the Trigger Knife Kits a few of you guys got for our last anniversary. :D
Which my son still loves! :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on January 06, 2015, 03:02:44 PM
Well I just scanned through all 40-odd pages of this thread and couldn't see anyone called Rick.
I also have really sore eyes.

 :rofl:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on January 06, 2015, 03:07:33 PM
He also kindly donated the Trigger Knife Kits a few of you guys got for our last anniversary. :D
Which my son still loves! :tu:

So do my two girls!  :tu:  Thanks Mr Klecker.  :cheers:

(https://farm3.staticflickr.com/2907/14715995506_27a4a8383b.jpg) (https://flic.kr/p/oqpjLs)

(https://farm3.staticflickr.com/2938/14738711402_f74955c74b.jpg) (https://flic.kr/p/ospKpQ)

(https://farm3.staticflickr.com/2922/14552330610_4cc810f172.jpg) (https://flic.kr/p/oaWuTU)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 06, 2015, 05:53:34 PM
Looks like 50ft-Trad got to Glen/Rick before Grant did as he has a knife sticking out of his neck :o
Use the "search this function" on top of page.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on January 06, 2015, 07:04:44 PM

(https://farm3.staticflickr.com/2922/14552330610_4cc810f172.jpg) (https://flic.kr/p/oaWuTU)


Beautiful kiddos Lobster Boy.  :tu:

The girl on the left in this picture has a look on her face like she knows something the rest of us do not lol.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on January 06, 2015, 11:24:11 PM
Beautiful kiddos Lobster Boy.  :tu:

The girl on the left in this picture has a look on her face like she knows something the rest of us do not lol.

Thanks.  :cheers:  According to her she does know everything.  :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 07, 2015, 12:12:09 AM
Beautiful kiddos Lobster Boy.  :tu:

The girl on the left in this picture has a look on her face like she knows something the rest of us do not lol.

Thanks.  :cheers:  According to her she does know everything.  :)
Does she own a Skelly?  ;)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on January 07, 2015, 12:16:26 AM
Beautiful kiddos Lobster Boy.  :tu:

The girl on the left in this picture has a look on her face like she knows something the rest of us do not lol.

Thanks.  :cheers:  According to her she does know everything.  :)
Does she own a Skelly?  ;)

She doesn't, yet.  :pok:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: mrynnr on January 07, 2015, 12:21:34 AM
Beautifully kiddos dr Z. They will take over the world
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: zoidberg on January 07, 2015, 12:32:02 AM
Beautifully kiddos dr Z. They will take over the world

Thanks.  :cheers:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: SteveC on January 07, 2015, 01:13:42 AM
Cute girls ! the one with the knife looks like she means business. 
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Huntsman on January 08, 2015, 07:13:58 AM
He also kindly donated the Trigger Knife Kits a few of you guys got for our last anniversary.
Which my son still loves!
So do my two girls!   Thanks Mr Klecker.

I was just about to make a 'Mr. Grumpy'  :( post, asking Zoidberg whether he was happy that his girls were using a knife as a ruler
- Then I thought 'Maybe I had just better check what a Trigger Knife is'
- Glad I did!! ;)
 
What fun  :)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 17, 2015, 04:03:23 AM
New Avatar
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: NKlamerus on January 17, 2015, 04:35:53 AM
I likey.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on January 17, 2015, 04:37:52 AM
Agree.

Is this something you do at work or something Kam? Between this and all your custom pictures with writing on them.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 17, 2015, 05:17:32 AM
Thanks, I am a CAD guy, been doing it for 15 years, now I own my engineering firm, it is small but it is mine, I run it anyway I see fits.  :D
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Higgins617 on January 17, 2015, 05:32:03 AM
Thanks, I am a CAD guy, been doing it for 15 years, now I own my engineering firm, it is small but it is mine, I run it anyway I see fits.  :D

I didn't know that, that's sweet! Good for you man, a bunch of my friends are in engineering now. That's what I wanted to do, but I can't handle the math  :-\
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 18, 2015, 08:29:08 AM
Things would been easier if I went to college, I worked my butt off from ground up.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Monrogue on January 18, 2015, 07:11:39 PM
Things would been easier if I went to college, I worked my butt off from ground up.
Good for you buddy :).

Sent from my XT901 using Tapatalk

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: shark_za on January 27, 2015, 01:16:48 PM
Para 2 Sprint, which one?  :pok:

Oh you don't have to ask me twice to show off this beauty. Para 2 Forest Green G-10 handle and CTS-204P blade.  :drool:

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/204pPara22.jpg~original)

I am getting mine this week  :cheers:
How you finding CTS-204P vs s30v ?   Hard to sharpen?
Loving my s30v so much I jumped when this sprint run was offered to me by a friend.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on January 27, 2015, 04:00:20 PM
Para 2 Sprint, which one?  :pok:

Oh you don't have to ask me twice to show off this beauty. Para 2 Forest Green G-10 handle and CTS-204P blade.  :drool:

(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/204pPara22.jpg~original)

I am getting mine this week  :cheers:
How you finding CTS-204P vs s30v ?   Hard to sharpen?
Loving my s30v so much I jumped when this sprint run was offered to me by a friend.

No idea how hard it is to sharpen. Still stupid sharp from when I got it about 3 months or so ago.

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 30, 2015, 07:47:26 PM
Run into another Skeletool user at REI, he had the carabiner completely cut off to reduce length and weight.  ::) 
Honestly I didn't like it. Not only it looks weird also made it uncomfortable to handle (many hot spots) and handle is too short in both knife and pliers mode. Really didn't save much weight.

Forgot to snap a picture of it.
But this is something he ended up with.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: babola on January 30, 2015, 08:00:44 PM
An invalid Skele?  ::)

I agree, don't like it, too.  :td:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 30, 2015, 08:29:30 PM
I think a few people here were doing that a while back. I'll have a look for the threads.
I don't like it at all. Let's face it, a lot of the Skele's attraction is due to it's looks.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 30, 2015, 08:36:14 PM
Let's face it, a lot of the Skele's attraction is due to it's looks.
I agree! It is second kind of cool, according to Nutnfancy.
For the same reason I could not like Juice.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Syncop8r on January 30, 2015, 08:40:39 PM
http://forum.multitool.org/index.php/topic,7595.15.html
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on January 30, 2015, 09:55:19 PM
Yup he did the exact same mod, not my cup of tea.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on February 16, 2015, 08:11:27 PM
We removed all the carpet and installed new wood floor in our home pass weekend, gave my MT a good work out.
I started with Skeletool but later switched to Mini-Surge.

Skeletool is very nice and easy to carry in my daily life to take care of small things that pop up, but if I knew I was going to work on a project, I would much rather have Mini-Surge. Beside lacking for few tools, Skeletool's biggest weakness is its driver mode, after 4~5 long wood screws, the driver became  awkward to use.

Skeletool is like a pistol, cool to have, easy to carry and better than nothing, but if I am going in combat, I better bring a rifle or MG.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on February 17, 2015, 11:47:35 PM
Skeletool's biggest weakness is its driver mode, after 4~5 long wood screws, the driver became  awkward to use.
I now carry a long MUT bit to address this issue.
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Kampfer on June 01, 2015, 04:10:38 AM
My favorite boy using my favorite tool.
(http://forum.multitool.org/index.php?action=dlattach;topic=55539.0;attach=194215;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=55539.0;attach=194217;image)
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: ducttapetech on June 01, 2015, 02:43:09 PM
Cool pics Kampfer. Handsome looking boy you got.

Nate
That's us mobile

Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: SteveC on March 31, 2023, 10:44:57 PM
I feel like a kid on Christmas Eve as I sit here planning what I will carry tomorrow.

Skelly did well during the challenge but no matter how much you like green M&Ms sometimes you want to carry a SAK or Rebar or Wave or well you get the idea.

On the bright side Kampfer already has my address so that will save time when I win all the loots up in this smurf.

Well done everyone, I for one had a good time.



Badge awarded and special prize for the oldest necro badge award   :cheers:  :woohoo:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Poncho65 on April 01, 2023, 12:17:36 AM
 :woohoo: Congrats  Harley :woohoo:

 :like: :like: :like:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: Echotech on April 01, 2023, 12:43:07 AM
:woohoo: :like: :tu:
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on April 01, 2023, 02:15:21 AM
That’s hilarious.

Had to dig into the before times to score that badge.

I am on a roll lately, nine years as a member and three badges to my name.

At this rate I’ll get the magic 21 badges by umm……math……2077!

Sigh
Title: Re: Official 31-Day SKELETOOL* Challenge!
Post by: HarleyXJGuy on April 01, 2023, 02:17:26 AM
My special prize better not involve lard and a chicken!

Had a lot of fun reading a large part of this thread again.

Brought back a lot of memories of good times and some great people. Even Monrouge I suppose.