Post by: gustophersmob on October 01, 2014, 01:24:40 AM
So, we begin the 30 day minimalist SAK challenge.
Should you choose to accept, you agree to spend the next 30 days under-tooled and over-stressed :ahhh
But, should you persevere (or at least fess up to being a failure ;) ), you get a shot at winning the penultimate in tool preparedness, the Swisstool Spirit!*
So, here are the rules to be eligble for the Spirit GAW (we will rely on the honor system):
1) The challenge runs from October 1st through October 30th.
2) You must participate all 30 days (i.e., you can't jump in on the 29th and be eligible for the GAW)
3) Reply to this thread with what minimalist SAK of your choice you will be participating with
4) Fess up if you have to use a more feature-packed tool than you minimalist choice
5) Must be legal in your area to win the Spirit
6) Have fun!
I will use random.org to draw a winner on October 31st.
*Spirit has a non-finished hole I started to add a thumb stud. After breaking 3 bits, I gave up. I will include a thumb stud so you can finish if you like, or just use as-is. The tool's functionality is not compromised.
Post by: gustophersmob on October 01, 2014, 01:26:12 AM
84mm of single blade minimalism, sure to frustrate at every loose screw encounter :ahhh :D
Post by: enki_ck on October 01, 2014, 01:41:54 AM
1) Dedicated tools are allowed, right? Like if I need a screwdriver or pair of pliers at home/workshop that won't be considered a failure?
2) Can I get a pass for one day some time in the next month to use a bunch of SAK saws (and only saws) to do a saw comparison test? ;)
Post by: Higgins617 on October 01, 2014, 01:43:15 AM
Post by: gustophersmob on October 01, 2014, 01:46:15 AM
Two questions. :D
1) Dedicated tools are allowed, right? Like if I need a screwdriver or pair of pliers at home/workshop that won't be considered a failure?
2) Can I get a pass for one day some time in the next month to use a bunch of SAK saws (and only saws) to do a saw comparison test? ;)
I think both of those situations are fine. Neither are really EDC type scenarios, one is a task where one would often get dedicated tools, and the other is a special test.
Besides, it wouldn't disqualify for the GAW anyway! :tu:
Post by: SAK Guy on October 01, 2014, 01:48:34 AM
Here is the Pioneer:
(http://i833.photobucket.com/albums/zz256/SAKGuy/Pioneerheart_zps5512c58e.jpg)
I'll have the SI dug out for EDC tomorrow and will post a pic.
Post by: enki_ck on October 01, 2014, 01:51:21 AM
But cool gesture with the giveaway of an awesome tool. :hatsoff:
Here's my choice of carry. You might recognize some of it. :D
(http://i1255.photobucket.com/albums/hh627/enki_ck/EDC/PA010198.jpg)
Post by: gustophersmob on October 01, 2014, 02:05:51 AM
I'm here just for the challenge. ;)
But cool gesture with the giveaway of an awesome tool. :hatsoff:
Here's my choice of carry. You might recognize some of it. :D
I do remember, great light :cheers:
Thanks for the reminder, I went and found my E01, so I'll take part in the 5mm challenge too. Updated pic of tomorrow's carry attached.
Post by: eddie1115 on October 01, 2014, 02:05:52 AM
Tourist:
(http://tapatalk.imageshack.com/v2/14/09/30/10244331af924b32d7ce47b6658c3ae9.jpg)
And the Small Tinker, which needs some work on the blades, and some scales, may replace the Tourist once it's finished. I figure no extra tools, still 84mm, should be ok? If the consensus is everyone sticks with the same knife all month, I can stick with the Tourist.
(http://tapatalk.imageshack.com/v2/14/09/30/8ca31253540e795cade5a0b1755c274d.jpg)
Post by: gustophersmob on October 01, 2014, 02:08:09 AM
Here's mine for the month, getting rid of the scissors will probably be the hardest part.
Tourist:
And the Small Tinker, which needs some work on the blades, and some scales, may replace the Tourist once it's finished. I figure no extra tools, still 84mm, should be ok? If the consensus is everyone sticks with the same knife all month, I can stick with the Tourist.
Since they are basically the same knife with the exception of the philips/corkscrew, I don't see a problem here.
I have to change too since my Wenger will arrive after the challenge starts.
Post by: gustophersmob on October 01, 2014, 02:09:10 AM
I'm here just for the challenge. ;)
But cool gesture with the giveaway of an awesome tool. :hatsoff:
Here's my choice of carry. You might recognize some of it. :D
I do remember, great light :cheers:
Thanks for the reminder, I went and found my E01, so I'll take part in the 5mm challenge too. Updated pic of tomorrow's carry attached.
I was just fiddling with the E01. It is both surprisingly brighter and bluer than I remember ;)
Post by: ducttapetech on October 01, 2014, 02:16:53 AM
(http://img.tapatalk.com/d/14/10/01/ubyra9ab.jpg)
Thanks for the Give away. Very nice of you!
Nate
Post by: Toolslinger on October 01, 2014, 02:59:59 AM
I'll try to get a pick in daylight tomorrow to update with. :tu:
Let the madness begin!
Post by: harronek on October 01, 2014, 03:18:37 AM
After work and weekends wouldn't be a problem .
I will be thinking of you all , good luck :)
Ken
Post by: Aloha on October 01, 2014, 03:27:41 AM
Post by: Hyatt181 on October 01, 2014, 03:35:59 AM
Sent from my iPhone using Tapatalk
Post by: ducttapetech on October 01, 2014, 03:37:23 AM
Nate
Post by: Hyatt181 on October 01, 2014, 03:39:08 AM
Sent from my iPhone using Tapatalk
Post by: ducttapetech on October 01, 2014, 03:45:00 AM
Nate
Post by: Hyatt181 on October 01, 2014, 03:50:33 AM
Sent from my iPhone using Tapatalk
Post by: colt 1911 on October 01, 2014, 04:04:25 AM
Is this okay ? Going with a Tinker small. Please withhold me from the VERY gracious drawing, give the others better odds.
(http://tapatalk.imageshack.com/v2/14/09/30/d9870be07daf793144423de2d8533f39.jpg)
Sak's rule !
Post by: Hyatt181 on October 01, 2014, 04:09:36 AM
Sent from my iPhone using Tapatalk
Post by: powernoodle on October 01, 2014, 04:26:57 AM
(http://i1302.photobucket.com/albums/ag137/toddh6/20130915_113514_zpsa4f60656.jpg)
Post by: colt 1911 on October 01, 2014, 04:28:11 AM
Great thread. I'm in. I'll be rocking this Victorinox Executive.
(http://i1302.photobucket.com/albums/ag137/toddh6/20130915_113514_zpsa4f60656.jpg)
That's a good choice !
Sak's rule !
Post by: arizonaranchman on October 01, 2014, 05:15:34 AM
This will be my 24/7 companion for the 30-Day Challenge - my trusty Pioneer :)
Post by: Monrogue on October 01, 2014, 05:18:28 AM
Post by: Monrogue on October 01, 2014, 05:30:59 AM
Post by: haackeg on October 01, 2014, 05:32:44 AM
Post by: Higgins617 on October 01, 2014, 05:32:54 AM
Post by: SAKchief on October 01, 2014, 05:47:58 AM
Post by: arizonaranchman on October 01, 2014, 06:16:35 AM
Will there be counselling services available for those who've taken up this utterly mad challenge? The pressure and stress on those doing this will be nothing short of enormous. I'm speaking of the true knife knuts here who are used to many if not dozens of models they rotate through regularly. The strain of going with ONE minimalist SAK for a MONTH will take them right up to the brink of madness - and some beyond the breaking point I fear.
The spectators watching this will be in for an incredible show of fortitude and sacrifice to say the least. So I ask that those with the guts to watch what's about to take place - please help out with encouragement and cheers. This could really get ugly, especially as the days drag on and temptations soar with each day, hour and minute.
Best of luck to all...
Post by: SAK Guy on October 01, 2014, 06:20:51 AM
Now on a serious note...
Will there be counselling services available for those who've taken up this utterly mad challenge? The pressure and stress on those doing this will be nothing short of enormous. I'm speaking of the true knife knuts here who are used to many if not dozens of models they rotate through regularly. The strain of going with ONE minimalist SAK for a MONTH will take them right up to the brink of madness - and some beyond the breaking point I fear.
The spectators watching this will be in for an incredible show of fortitude and sacrifice to say the least. So I ask that those with the guts to watch what's about to take place - please help out with encouragement and cheers. This could really get ugly, especially as the days drag on and temptations soar with each day, hour and minute.
Best of luck to all...
Well spoken and true my friend!! :tu:
Post by: shark_za on October 01, 2014, 06:59:40 AM
If I get on well with the Waiter this month I will probably get a Compact.
84mm single layer SAK and 5mm LED.
I have taken off the Classic Alox and Rally that live on my two bunches of keys, E05 also removed there.
Post by: AimlessWanderer on October 01, 2014, 07:06:58 AM
Case Scout Jr, Nitecore T0 (5mm LED), and a pair of 4LN mini vise grips :dwts:
Post by: Sorel on October 01, 2014, 07:40:48 AM
...So the alox Bantam it is. Wish me luck.
Post by: Grass on October 01, 2014, 07:50:01 AM
Post by: kirk13 on October 01, 2014, 08:02:11 AM
Resting a well used LD10 and Wenger EvoWood 10 for these two pristine little babies.
If I get on well with the Waiter this month I will probably get a Compact.
84mm single layer SAK and 5mm LED.
I have taken off the Classic Alox and Rally that live on my two bunches of keys, E05 also removed there.
If no ones already said it,hi and welcome boet :2tu:
It's good to see so many new members jumping straight into this!
Post by: SAKchief on October 01, 2014, 08:14:45 AM
Challenge accepted.
I forgot to mention, it's a 58mm Manager. I wonder how well the knife will cut an apple.
Otherwise I'll have to eat my apples like regular people, instead of cutting it up with my Alox custom.
Post by: red_rider_1979 on October 01, 2014, 08:35:01 AM
Here's my usual on-body EDC - a humble pioneer and my backup "holy trinity". I work in a school environment (ie. classroom/office) and have been able to get by with just these.
(http://i25.photobucket.com/albums/c98/red_rider_1979/Mobile%20Uploads/20141001_141821.jpg) (http://s25.photobucket.com/user/red_rider_1979/media/Mobile%20Uploads/20141001_141821.jpg.html)
I do keep a stayglow rambler with my keys which are kept in my bag.
(http://i25.photobucket.com/albums/c98/red_rider_1979/Mobile%20Uploads/20141001_141326.jpg) (http://s25.photobucket.com/user/red_rider_1979/media/Mobile%20Uploads/20141001_141326.jpg.html)
So for this challenge, I'm gonna try to use just the rambler for a month. Wish me luck!!!
Post by: hiraethus on October 01, 2014, 08:47:10 AM
(https://farm4.staticflickr.com/3927/15408424005_e6a55baa49.jpg) (https://www.flickr.com/photos/26008756@N08/15408424005/)
Post by: Etherealicer on October 01, 2014, 09:02:39 AM
Also worried about tiny pressure-sensitive explosive grenades (griswalds)?Challenge accepted.
I forgot to mention, it's a 58mm Manager. I wonder how well the knife will cut an apple.
Otherwise I'll have to eat my apples like regular people, instead of cutting it up with my Alox custom.
My apple of the day is a largish Golden Delicious, almost green, the way I like them.
I'm in with my Midnight Manager and on Wednesdays with a Wenger Crusader Microlight (no screwdrivers :ahhh).
Pics comming sooonish.
Post by: AimlessWanderer on October 01, 2014, 09:08:56 AM
Day one, and I haven't even got anything Swiss :ahhh :ahhh
Case Scout Jr, Nitecore T0 (5mm LED), and a pair of 4LN mini vise grips :dwts:
Pics :D
(http://forum.multitool.org/index.php?action=dlattach;topic=54888.0;attach=131117;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=54888.0;attach=131119;image)
Size comparison with a Cadet ...
(http://forum.multitool.org/index.php?action=dlattach;topic=54888.0;attach=131121;image)
Post by: AimlessWanderer on October 01, 2014, 10:42:59 AM
So far so good :ahhh
Post by: firiki on October 01, 2014, 11:10:33 AM
Good luck, everybody. :hatsoff: to gustophersmob
Post by: coSAK on October 01, 2014, 11:24:41 AM
Let the Games begin!
:climber:
Post by: hiraethus on October 01, 2014, 11:26:10 AM
(https://farm3.staticflickr.com/2947/15408833912_a8a8ff6b0b.jpg) (https://www.flickr.com/photos/26008756@N08/15408833912/)
Post by: zoidberg on October 01, 2014, 11:56:37 AM
Two questions. :D
1) Dedicated tools are allowed, right? Like if I need a screwdriver or pair of pliers at home/workshop that won't be considered a failure?
2) Can I get a pass for one day some time in the next month to use a bunch of SAK saws (and only saws) to do a saw comparison test? ;)
I think both of those situations are fine. Neither are really EDC type scenarios, one is a task where one would often get dedicated tools, and the other is a special test.
Besides, it wouldn't disqualify for the GAW anyway! :tu:
If dedicated tools are allowed for jobs where regular people use dedicated tools then I'm in.
Today I grabbed this fella (on the left) because it was Wenger Wednesday.
(https://farm4.staticflickr.com/3669/11073774363_158235b9e3.jpg) (https://flic.kr/p/hSxZjc)
However now I'm thinking I'll go with the single layer 07 Pioneer Apprentice.
(https://farm3.staticflickr.com/2947/15375840806_29cc245e75.jpg) (https://flic.kr/p/pqHcMy)
Edit: And for a flashlight I'll go with the Fenix E01. :)
Post by: ducttapetech on October 01, 2014, 12:23:35 PM
Nate
Post by: Hyatt181 on October 01, 2014, 12:23:46 PM
Sent from my iPhone using Tapatalk
Post by: zoidberg on October 01, 2014, 12:50:04 PM
Wait a sec, we are suppose to have a minimal tourch too?There was an additional challenge (http://forum.multitool.org/index.php/topic,54797.msg954775.html#msg954775) from enki. :drink:
Nate
Post by: ducttapetech on October 01, 2014, 12:52:05 PM
Nate
Post by: firiki on October 01, 2014, 12:52:52 PM
http://forum.multitool.org/index.php/topic,47083.msg771168.html#msg771168
>:D
:D
:angel:
Post by: hiraethus on October 01, 2014, 12:57:31 PM
Post by: AimlessWanderer on October 01, 2014, 01:51:31 PM
First SAK failure: the small driver on the can opener didn't quite have the reach needed to tighten some terminal screws on a PCB. Could have done with a Technician (http://www.sakwiki.com/tiki-index.php?page=Technician) instead of my Pioneer but had to get a small flat driver. I had to grab a pair of pliers from the toolbox while I was there to help grip some stuff in the back of the cabinet I was working on. Normally would have a Spirit or Rebar on me.
I've had to use the Vise Grips already. Just pulling turnings from the soles of my boots. I might have been able to gouge them out with the awl on the Scout Jr, but would take longer, chance of getting a cut, and not so good on your boot soles either. Maybe we ought to keep a rolling tally of when we were stumped by our minimalist carry .... I know how some people here are obsessed with lists (especially when they go wrong) >:D
001 - hiraethus - small flat driver (terminal screws on PCB)
002 - 50ft-trad - Pliers (pulling turnings from soles of safety boots)
Post by: Etherealicer on October 01, 2014, 01:52:04 PM
Oh, I'm in on that one.Wait a sec, we are suppose to have a minimal tourch too?There was an additional challenge (http://forum.multitool.org/index.php/topic,54797.msg954775.html#msg954775) from enki. :drink:
Nate
Not Wed: Vic Midnight Manager
Wed: Wenger Mini Spotlight
I decided to drop the Gerber GDC Zip Blade too...
Post by: SAK Guy on October 01, 2014, 01:57:54 PM
My minimal pair for the month - old cross Pioneer and E05:
(https://farm4.staticflickr.com/3927/15408424005_e6a55baa49.jpg) (https://www.flickr.com/photos/26008756@N08/15408424005/)
Nice!!!! :tu:
I'll tote my Gerber Ultra LED if I need a light....it's simple enough (screw on/off)
Post by: SAK Guy on October 01, 2014, 02:37:13 PM
Wenger '97 SI
(http://i833.photobucket.com/albums/zz256/SAKGuy/MinEDCWengerWed_zpsb9226731.jpg)
Post by: arizonaranchman on October 01, 2014, 03:05:42 PM
(http://i1145.photobucket.com/albums/o501/alpineharleydavidson/Pioneer%20SAK%209-12-14/45503FF8-AAFB-4CE4-85ED-AE2E97F2337E_zps03a8x6fm.jpg)
Post by: SAK Guy on October 01, 2014, 03:09:12 PM
Post by: kirk13 on October 01, 2014, 03:19:19 PM
Edit
(http://i782.photobucket.com/albums/yy104/kirk130013/imagejpg1_zpsfa5d4519.jpg) (http://s782.photobucket.com/user/kirk130013/media/imagejpg1_zpsfa5d4519.jpg.html)
Post by: gustophersmob on October 01, 2014, 03:51:42 PM
Post by: gustophersmob on October 01, 2014, 03:52:47 PM
It really is difficult having a blade only. Looking forward to my Wengerinox Bantam
Post by: eddie1115 on October 01, 2014, 04:01:13 PM
The minimalist flash light challenge is optional :cheers:And I was going to skip this one. But, might as well go all in. So I switched for my Princeton Tec Pulsar (fauxton). I'll have to figure the best way to carry it when I switch to a knife with no key ring :think:
Day 1:
(http://tapatalk.imageshack.com/v2/14/10/01/3e5a32b7a83c5f7c6b2f174ee57a60db.jpg)
Post by: Toolslinger on October 01, 2014, 04:08:26 PM
Compact, P2 and Bic. 30 days, here we go!
Post by: gene stoner on October 01, 2014, 04:13:42 PM
Post by: arizonaranchman on October 01, 2014, 04:18:43 PM
(http://i1145.photobucket.com/albums/o501/alpineharleydavidson/Pioneer%20SAK%209-12-14/ECB1931D-C6E2-479D-99CC-2CEB9D9B0AE1_zpsny2imyvj.jpg)
PS: What's a 5mm flashlight? Does my Streamlight PT1AA qualify? I've EDC'd this for about 3+ yrs or so but not sure what the 5mm thing refers to - bulb size perhaps?
(http://i1145.photobucket.com/albums/o501/alpineharleydavidson/Pioneer%20SAK%209-12-14/75354D5F-2DFF-4302-AB09-88DD668B8B46_zpszbjz9boz.jpg)
Post by: SAK Guy on October 01, 2014, 04:18:52 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/30dayEDCwithAlt_zpsafddded1.jpg)
Post by: ducttapetech on October 01, 2014, 04:19:50 PM
I Want my SURGE!!!
On a good note, the Compact has been doing what I have asked of it. Just had to make some trips back to the shop at work. Tools like pliers, Phillips driver, and a wire cutter. I really miss my OH blades. I am use to grabbing stuff and opening my blade at the same time.
I did kinda freaked out at for a second. I am so use to carrying my Surge on my side and without thinking I reached for it, and it was not there. I had that gutted and panicked feeling that my Surge was lost. Then I remembered it was safe and sound at home.
All and all, not to bad. So far. Just some extra trips, but a couple pounds lighter. We will see how I do on the farm after work.
Nate
Post by: Toolslinger on October 01, 2014, 04:23:55 PM
Oh my GOD WHAT THE smurf WAS I THINKING?!?! Gahhhhh!!!
I Want my SURGE!!!
On a good note, the Compact has been doing what I have asked of it. Just had to make some trips back to the shop at work. Tools like pliers, Phillips driver, and a wire cutter. I really miss my OH blades. I am use to grabbing stuff and opening my blade at the same time.
I did kinda freaked out at for a second. I am so use to carrying my Surge on my side and without thinking I reached for it, and it was not there. I had that gutted and panicked feeling that my Surge was lost. Then I remembered it was safe and sound at home.
All and all, not to bad. So far. Just some extra trips, but a couple pounds lighter. We will see how I do on the farm after work.
Nate
I hear ya.
Felt odd not having the extra weight/bulk of a full SAK or the MT sheath on my hip. Felt like I hadn't properly dressed this morning. Thankfully, the feeling has passed (might change if I need a tool I don't have though).
Post by: colt 1911 on October 01, 2014, 04:26:29 PM
Oh my GOD WHAT THE smurf WAS I THINKING?!?! Gahhhhh!!!
I Want my SURGE!!!
On a good note, the Compact has been doing what I have asked of it. Just had to make some trips back to the shop at work. Tools like pliers, Phillips driver, and a wire cutter. I really miss my OH blades. I am use to grabbing stuff and opening my blade at the same time.
I did kinda freaked out at for a second. I am so use to carrying my Surge on my side and without thinking I reached for it, and it was not there. I had that gutted and panicked feeling that my Surge was lost. Then I remembered it was safe and sound at home.
All and all, not to bad. So far. Just some extra trips, but a couple pounds lighter. We will see how I do on the farm after work.
Nate
I have the same issues, having to make trips back to the shop SUCKS.
Sak's rule !
Post by: Sorel on October 01, 2014, 04:35:50 PM
...but a couple pounds lighter.I for one am positively enjoying not having a Spartan dangling by p7 in my jeans pocket. That works, but not extremely well, especially when I also have my wallet crammed into the same pocket. I can't even feel the Bantam in my back pocket right now, but it did just fine with breakfast earlier.
Post by: pfrsantos on October 01, 2014, 04:50:38 PM
It'll be fairly easy to just use these. I don't have the need for much tools and the small tasks I need to take care off are pretty much covered.
8) 8)
Post by: Etherealicer on October 01, 2014, 05:19:17 PM
(http://forum.multitool.org/index.php?action=dlattach;topic=54888.0;attach=131151;image)
Mostly light tasks (opening letters, punching holes in the Blini package, chopping an apple to pieces). While preparing lunch I was wishing for a bigger blade, spreading radish mousse was not easy (I used a pearl spoon for the caviar :D).
(http://forum.multitool.org/index.php?action=dlattach;topic=54888.0;attach=131153;image)
Shortly before the end of my workday, I was supposed to exchange a hard-drive. Let me tell you, the nail-file does not work for that, so I post-phoned that task for tomorrow when I will be carrying the Midnight Manager.
Post by: powernoodle on October 01, 2014, 05:34:23 PM
(http://i1302.photobucket.com/albums/ag137/toddh6/executive_zps1b6faa64.jpg)
Post by: derekmac on October 01, 2014, 05:38:04 PM
I'll be going at it with my old cross red Pioneer. I don't think it'll be too hard to not want to veer off, as I have been using that SAK for most cutting duties, and my MT seldom leaves it's sheath. The weekends will be a bit harder though as I like to have scissors and tweezers on me, but I think I'll be able to manage.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/14DFA4C2-FB28-4A8D-981D-A6E15BA25530_zpsuhtcfjph.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/14DFA4C2-FB28-4A8D-981D-A6E15BA25530_zpsuhtcfjph.jpg.html)
Post by: SAK Guy on October 01, 2014, 05:47:33 PM
(https://crackinfilms.files.wordpress.com/2012/03/ww.jpg)
Post by: coSAK on October 01, 2014, 05:52:18 PM
[…] The weekends will be a bit harder though as I like to have scissors and tweezers on me, but I think I'll be able to manage.And then you can go for a Compact! :D
Post by: derekmac on October 01, 2014, 05:54:09 PM
I don't have a compact. :facepalm:[…] The weekends will be a bit harder though as I like to have scissors and tweezers on me, but I think I'll be able to manage.And then you can go for a Compact! :D
Post by: Monrogue on October 01, 2014, 05:57:00 PM
I don't have a compact. :facepalm:[…] The weekends will be a bit harder though as I like to have scissors and tweezers on me, but I think I'll be able to manage.And then you can go for a Compact! :D
Well then get one man! :pok: >:D
It looks like we may have a Compact Club and a OC Red Pioneer Club going in the challenge. Will there be any gang wars here? :SAKnight:
Post by: powernoodle on October 01, 2014, 05:57:27 PM
Post by: pfrsantos on October 01, 2014, 06:06:00 PM
I lied earlier. I am going with a black Executive instead of a red one. Its flavor matches nicely with that of the Fenix E05 (2014).
(http://i1302.photobucket.com/albums/ag137/toddh6/executive_zps1b6faa64.jpg)
How very dare you Derek Faye (http://www.youtube.com/watch?v=XvqZwAR6Uio#ws)
:D :D :D :D
Post by: magentus on October 01, 2014, 06:14:53 PM
Thanks for the GAW too - I'd love to win a swisstool! Cheers.
Good luck everyone
:salute:
Post by: gustophersmob on October 01, 2014, 06:28:51 PM
Yeah, that raises a Rules Inquiry for the commissioner. Do we have to stick to the same minimalist SAK the whole time, or can you switch between minimalist SAKs? The former is more in line with the spirit of suffering that this challenge is intended to create.
In general, I think it is more keeping in the spirit to stick with the same knife.
I do think there are some OK exceptions. For instance myself and Monrogue are making due with what minimal knife we can find until ours arrive, then we will switch.
Also, switching from a pioneer to an SI for Wenger Wednesday seems OK since it is the same tool set.
Still, its all about the fun of the challenge, so whatever floats your boat. Just fess up if you "cheat." :cheers:
Post by: gustophersmob on October 01, 2014, 06:30:02 PM
Morning has broken! The Pioneer is in my pocket and I'm beaming with confidence that we'll blast through this month with ease. :D
(http://i1145.photobucket.com/albums/o501/alpineharleydavidson/Pioneer%20SAK%209-12-14/ECB1931D-C6E2-479D-99CC-2CEB9D9B0AE1_zpsny2imyvj.jpg)
I really like this pic :tu:
Post by: gustophersmob on October 01, 2014, 06:31:29 PM
Day I - Wenger Wednesday with Champion Spotlight
Mostly light tasks (opening letters, punching holes in the Blini package, chopping an apple to pieces). While preparing lunch I was wishing for a bigger blade, spreading radish mousse was not easy (I used a pearl spoon for the caviar :D).
Shortly before the end of my workday, I was supposed to exchange a hard-drive. Let me tell you, the nail-file does not work for that, so I post-phoned that task for tomorrow when I will be carrying the Midnight Manager.
Now that's hard core minimalist!
Post by: gustophersmob on October 01, 2014, 06:32:43 PM
Oh my GOD WHAT THE smurf WAS I THINKING?!?! Gahhhhh!!!
I Want my SURGE!!!
On a good note, the Compact has been doing what I have asked of it. Just had to make some trips back to the shop at work. Tools like pliers, Phillips driver, and a wire cutter. I really miss my OH blades. I am use to grabbing stuff and opening my blade at the same time.
I did kinda freaked out at for a second. I am so use to carrying my Surge on my side and without thinking I reached for it, and it was not there. I had that gutted and panicked feeling that my Surge was lost. Then I remembered it was safe and sound at home.
All and all, not to bad. So far. Just some extra trips, but a couple pounds lighter. We will see how I do on the farm after work.
Nate
:rofl:
At least the Compact is keeping up
Post by: Etherealicer on October 01, 2014, 06:41:40 PM
:rofl:Oh my GOD WHAT THE smurf WAS I THINKING?!?! Gahhhhh!!!
I Want my SURGE!!!
On a good note, the Compact has been doing what I have asked of it. Just had to make some trips back to the shop at work. Tools like pliers, Phillips driver, and a wire cutter. I really miss my OH blades. I am use to grabbing stuff and opening my blade at the same time.
I did kinda freaked out at for a second. I am so use to carrying my Surge on my side and without thinking I reached for it, and it was not there. I had that gutted and panicked feeling that my Surge was lost. Then I remembered it was safe and sound at home.
All and all, not to bad. So far. Just some extra trips, but a couple pounds lighter. We will see how I do on the farm after work.
Nate
:rofl:
At least the Compact is keeping up
I had the same, thought I lost my blade :ahhh, then I thougt I lost my Crusader Spot Light (its so small it vanished in my pockets) :ahhh
Post by: Etherealicer on October 01, 2014, 06:44:31 PM
Well, I do work in an office so my tool requirement are lower than others, so in all fairness I needed to go this far.Day I - Wenger Wednesday with Champion Spotlight
Mostly light tasks (opening letters, punching holes in the Blini package, chopping an apple to pieces). While preparing lunch I was wishing for a bigger blade, spreading radish mousse was not easy (I used a pearl spoon for the caviar :D).
Shortly before the end of my workday, I was supposed to exchange a hard-drive. Let me tell you, the nail-file does not work for that, so I post-phoned that task for tomorrow when I will be carrying the Midnight Manager.
Now that's hard core minimalist!
But seriously, that tiny blade is :ahhh
Post by: arizonaranchman on October 01, 2014, 06:46:38 PM
Oh my GOD WHAT THE smurf WAS I THINKING?!?! Gahhhhh!!!
I Want my SURGE!!!
On a good note, the Compact has been doing what I have asked of it. Just had to make some trips back to the shop at work. Tools like pliers, Phillips driver, and a wire cutter. I really miss my OH blades. I am use to grabbing stuff and opening my blade at the same time.
I did kinda freaked out at for a second. I am so use to carrying my Surge on my side and without thinking I reached for it, and it was not there. I had that gutted and panicked feeling that my Surge was lost. Then I remembered it was safe and sound at home.
All and all, not to bad. So far. Just some extra trips, but a couple pounds lighter. We will see how I do on the farm after work.
Nate
Our first panic-attack? There, there... Breathe deeply... Perhaps keep a brown paper bag handy to breathe into if necessary (we may all need one of these at some point this month!)?
This is going to be a tough month folks... I know I sure do miss my Case large Stockman and old Leatherman classic that's for sure!
Post by: Etherealicer on October 01, 2014, 06:53:48 PM
or
At least we could celebrate the end (yes, I'm already looking forward to it) with a Glutton Day!
Post by: enki_ck on October 01, 2014, 06:56:24 PM
Day one, and I haven't even got anything Swiss :ahhh :ahhh
Case Scout Jr, Nitecore T0 (5mm LED), and a pair of 4LN mini vise grips :dwts:
Pics :D
...Size comparison with a Cadet ...
(http://forum.multitool.org/index.php?action=dlattach;topic=54888.0;attach=131121;image)
You need an orange Cadet. :pok:
:D
Post by: enki_ck on October 01, 2014, 06:57:24 PM
Resting a well used LD10 and Wenger EvoWood 10 for these two pristine little babies.
If I get on well with the Waiter this month I will probably get a Compact.
84mm single layer SAK and 5mm LED.
I have taken off the Classic Alox and Rally that live on my two bunches of keys, E05 also removed there.
(http://forum.multitool.org/index.php?action=dlattach;topic=54888.0;attach=131111;image)
A brother by challenge carry. :cheers:
Welcome to :MTO:
:waving:
Post by: enki_ck on October 01, 2014, 07:03:09 PM
Day #1... So far been up 30 min and let the dogs out... Cup of coffee is steaming on the desk beside me and the Pioneer is in my pocket ready for whatever may come
...
So that was YOU! :ahhh
Baha men-Who let the dogs out (official) (http://www.youtube.com/watch?v=1uaPs8sxqB0#)
>:D
Post by: AimlessWanderer on October 01, 2014, 07:06:41 PM
Day one, and I haven't even got anything Swiss :ahhh :ahhh
Case Scout Jr, Nitecore T0 (5mm LED), and a pair of 4LN mini vise grips :dwts:
Pics :D
...Size comparison with a Cadet ...
(http://forum.multitool.org/index.php?action=dlattach;topic=54888.0;attach=131121;image)
You need an orange Cadet. :pok:
:D
That was the original plan back when I got the Fuse, but couldn't find one at the right price. The deal I had my eye on sold out just before I decided to go for it :-\ I do quite like the Scout Jr now though. It doesn't walk and talk as smoothly as the Vics, but it functions well enough, sits comfy in the hand, and I quite like the G10 scales too :D
Post by: enki_ck on October 01, 2014, 07:13:01 PM
Yeah, that raises a Rules Inquiry for the commissioner. Do we have to stick to the same minimalist SAK the whole time, or can you switch between minimalist SAKs? The former is more in line with the spirit of suffering that this challenge is intended to create.
In general, I think it is more keeping in the spirit to stick with the same knife.
I do think there are some OK exceptions. For instance myself and Monrogue are making due with what minimal knife we can find until ours arrive, then we will switch.
Also, switching from a pioneer to an SI for Wenger Wednesday seems OK since it is the same tool set.
Still, its all about the fun of the challenge, so whatever floats your boat. Just fess up if you "cheat." :cheers:
Agree. :cheers:
For instance gustophersmob, I and a few other guys chose to go with a single layer SAK (without scissors). If we'd choose to go one layer up and switch to the Compact/Golfer for scissors or Cadet/Spartan/Commander/... for openers and screwdrivers it would still be a SAK withing the requirements but I'd consider it a fail.
Post by: cbl51 on October 01, 2014, 07:13:20 PM
(https://farm3.staticflickr.com/2932/14660643921_f09db5ffc1_c.jpg)
Post by: Kampfer on October 01, 2014, 07:14:48 PM
Picture comes later.
Post by: enki_ck on October 01, 2014, 07:17:35 PM
Day one, and I haven't even got anything Swiss :ahhh :ahhh
Case Scout Jr, Nitecore T0 (5mm LED), and a pair of 4LN mini vise grips :dwts:
Pics :D
...Size comparison with a Cadet ...
...
You need an orange Cadet. :pok:
:D
That was the original plan back when I got the Fuse, but couldn't find one at the right price. The deal I had my eye on sold out just before I decided to go for it :-\ I do quite like the Scout Jr now though. It doesn't walk and talk as smoothly as the Vics, but it functions well enough, sits comfy in the hand, and I quite like the G10 scales too :D
I'm still holding onto one for you if you wanna tempt me with a trade. ;) Hasn't left the box since I sent you the pics.
Post by: gene stoner on October 01, 2014, 07:27:01 PM
I am entering with my Farmer, am I too late?
Picture comes later.
Two layers or less. Farmer is three layers.
Post by: pfrsantos on October 01, 2014, 07:45:10 PM
I'm going with the most minimal SAK there is; the classic. As long as I can have my P-38 along. I'll ditch any other knife and the pistol for the challenge.
(https://farm3.staticflickr.com/2932/14660643921_f09db5ffc1_c.jpg)
Wrong!
:pok: :pok:
http://www.sakwiki.com/tiki-index.php?page=Pocket+Pal+58mm
http://www.sakwiki.com/tiki-index.php?page=Beginner+Victorinox
Post by: Freaver on October 01, 2014, 08:07:25 PM
There is no way I'd be able to do this; at least not with a standard SAK. AFAIK, there isn't any two-layer SAK with inline philips and knifeblade? That's my most used tools and despite of that, my daily carry consists of 1 SAK, 2 MT's and a single OPMT.
Good luck to all of you - it'll be interesting to follow this thread and see how many of you end up going crazy. ;)
Post by: eddie1115 on October 01, 2014, 08:16:31 PM
:hatsoff: to all of you who takes part in this challenge.Well a Scientist has two layers. Blade/combo tool, and phillips/mag glass. But those are tough to come by unless it's a mod.
There is no way I'd be able to do this; at least not with a standard SAK. AFAIK, there isn't any two-layer SAK with inline philips and knifeblade? That's my most used tools and despite of that, my daily carry consists of 1 SAK, 2 MT's and a single OPMT.
Good luck to all of you - it'll be interesting to follow this thread and see how many of you end up going crazy. ;)
Post by: Freaver on October 01, 2014, 08:20:30 PM
:hatsoff: to all of you who takes part in this challenge.Well a Scientist has two layers. Blade/combo tool, and phillips/mag glass. But those are tough to come by unless it's a mod.
There is no way I'd be able to do this; at least not with a standard SAK. AFAIK, there isn't any two-layer SAK with inline philips and knifeblade? That's my most used tools and despite of that, my daily carry consists of 1 SAK, 2 MT's and a single OPMT.
Good luck to all of you - it'll be interesting to follow this thread and see how many of you end up going crazy. ;)
Hmm... I think that's the first time I've heard mention of that model. Gotta investigate.
Post by: eddie1115 on October 01, 2014, 08:24:43 PM
:hatsoff: to all of you who takes part in this challenge.Well a Scientist has two layers. Blade/combo tool, and phillips/mag glass. But those are tough to come by unless it's a mod.
There is no way I'd be able to do this; at least not with a standard SAK. AFAIK, there isn't any two-layer SAK with inline philips and knifeblade? That's my most used tools and despite of that, my daily carry consists of 1 SAK, 2 MT's and a single OPMT.
Good luck to all of you - it'll be interesting to follow this thread and see how many of you end up going crazy. ;)
Hmm... I think that's the first time I've heard mention of that model. Gotta investigate.
Found one on ebay for 197 USD :ahhh
Would be a pretty straightforward mod though...
Post by: Freaver on October 01, 2014, 08:28:32 PM
:hatsoff: to all of you who takes part in this challenge.Well a Scientist has two layers. Blade/combo tool, and phillips/mag glass. But those are tough to come by unless it's a mod.
There is no way I'd be able to do this; at least not with a standard SAK. AFAIK, there isn't any two-layer SAK with inline philips and knifeblade? That's my most used tools and despite of that, my daily carry consists of 1 SAK, 2 MT's and a single OPMT.
Good luck to all of you - it'll be interesting to follow this thread and see how many of you end up going crazy. ;)
Hmm... I think that's the first time I've heard mention of that model. Gotta investigate.
Found one on ebay for 197 USD :ahhh
Would be a pretty straightforward mod though...
Definitely not buying an original then! That's close to the buying-value of all my SAK's and multi's together.
But yeah, it shouldn't be hard to make one, if one would be so lucky to have the right skills. ;)
Post by: AimlessWanderer on October 01, 2014, 08:43:59 PM
Day one, and I haven't even got anything Swiss :ahhh :ahhh
Case Scout Jr, Nitecore T0 (5mm LED), and a pair of 4LN mini vise grips :dwts:
Pics :D
...Size comparison with a Cadet ...
...
You need an orange Cadet. :pok:
:D
That was the original plan back when I got the Fuse, but couldn't find one at the right price. The deal I had my eye on sold out just before I decided to go for it :-\ I do quite like the Scout Jr now though. It doesn't walk and talk as smoothly as the Vics, but it functions well enough, sits comfy in the hand, and I quite like the G10 scales too :D
I'm still holding onto one for you if you wanna tempt me with a trade. ;) Hasn't left the box since I sent you the pics.
Hmmm. Tempting .... >:D won't in a position to do that for a couple of weeks, but I'll definitely consider that once I've got these other obligations addressed :D
:cheers: :cheers:
Post by: kirk13 on October 01, 2014, 08:44:37 PM
The Wenger J10 performed flawlessly,taking on cardboard packing boxes,the Phillips dealt with screws from the stupid small( detaining HO cars in their boxes) upto no2 screws on the 1/18 Aston. The combo tool was used for some light prying( a 40ft container from a Krone Stacker if you were wondering). Finally,Junior posed for a few beauty shots :D
No pliers,scissors,small flat drivers or torches were required today.
So far,so very good :D
Post by: Higgins617 on October 01, 2014, 08:48:20 PM
Post by: Etherealicer on October 01, 2014, 09:01:53 PM
A rambler has an inline philips and knife-blade, so no more excuses!:hatsoff: to all of you who takes part in this challenge.Well a Scientist has two layers. Blade/combo tool, and phillips/mag glass. But those are tough to come by unless it's a mod.
There is no way I'd be able to do this; at least not with a standard SAK. AFAIK, there isn't any two-layer SAK with inline philips and knifeblade? That's my most used tools and despite of that, my daily carry consists of 1 SAK, 2 MT's and a single OPMT.
Good luck to all of you - it'll be interesting to follow this thread and see how many of you end up going crazy. ;)
Post by: Kampfer on October 01, 2014, 09:02:58 PM
I am not equipped for this challenge then, I am out. Good luck everyone.I am entering with my Farmer, am I too late?
Picture comes later.
Two layers or less. Farmer is three layers.
Post by: gene stoner on October 01, 2014, 09:06:40 PM
Post by: Sorel on October 01, 2014, 09:30:55 PM
Post by: Higgins617 on October 01, 2014, 09:33:40 PM
Post by: SAK Guy on October 01, 2014, 10:01:18 PM
Oh oh I just bid on a swiss champ on ebay this could jeopardize the challenge for me if I win I'll have to carry it because I wont be able to wait till Oct 31 to carry it.
No! Don't do it! You'd be out! Finished in the 30 day challenge! :pok: :D
(http://dubsism.files.wordpress.com/2012/12/dean-wormer.jpg)
Post by: zoidberg on October 01, 2014, 10:09:09 PM
I don't have a compact. :facepalm:[…] The weekends will be a bit harder though as I like to have scissors and tweezers on me, but I think I'll be able to manage.And then you can go for a Compact! :D
Well then get one man! :pok: >:D
It looks like we may have a Compact Club and a OC Red Pioneer Club going in the challenge. Will there be any gang wars here? :SAKnight:
And the Single Layer Club. :pok:
Post by: derekmac on October 01, 2014, 10:13:15 PM
If the Compacts were all blue, we could have a good old fashion Red vs Blue match going on!! :rofl:I don't have a compact. :facepalm:[…] The weekends will be a bit harder though as I like to have scissors and tweezers on me, but I think I'll be able to manage.And then you can go for a Compact! :D
Well then get one man! :pok: >:D
It looks like we may have a Compact Club and a OC Red Pioneer Club going in the challenge. Will there be any gang wars here? :SAKnight:
Post by: Monrogue on October 01, 2014, 10:25:33 PM
I bet there will be a few "clubs" developed within this challenge. Wasn't there supposed to be a list going of who is in the challenge and what SAK they're using?
Post by: kirk13 on October 01, 2014, 10:29:39 PM
Sorry Derek, no blue for me - red or black all the way :tu:
I bet there will be a few "clubs" developed within this challenge. Wasn't there supposed to be a list going of who is in the challenge and what SAK they're using?
Good idea...
Kirk13- (and may the Gods have mercy...) Vic 84mm Apprentice/ Wenger a Junior 10- not entering prize draw
Post by: Higgins617 on October 01, 2014, 10:31:35 PM
Post by: colt 1911 on October 01, 2014, 10:32:11 PM
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
Powernoodle - executive
Sak's rule !
Post by: hiraethus on October 01, 2014, 10:36:06 PM
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
Post by: derekmac on October 01, 2014, 10:36:49 PM
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
Post by: AimlessWanderer on October 01, 2014, 10:39:03 PM
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Post by: hiraethus on October 01, 2014, 10:39:52 PM
Post by: Sorel on October 01, 2014, 10:40:52 PM
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Post by: colt 1911 on October 01, 2014, 10:46:31 PM
Fixed
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Post by: AimlessWanderer on October 01, 2014, 10:49:56 PM
Thanks Colt :cheers:
Post by: magentus on October 01, 2014, 10:55:43 PM
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Post by: hiraethus on October 01, 2014, 10:58:10 PM
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
Post by: Syph007 on October 01, 2014, 11:14:48 PM
would be quite a challenge for me to get by with. I dont know if I could go a whole month with it though.
(http://i1117.photobucket.com/albums/k587/Syph007/Apprentice/IMG_7172.jpg)
I better decide today!
Post by: mrynnr on October 01, 2014, 11:24:25 PM
Post by: eddie1115 on October 01, 2014, 11:27:54 PM
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
Post by: AimlessWanderer on October 01, 2014, 11:30:04 PM
Day one of the challenge, and the only tool I've used on the Scout Jr is the can opener :facepalm:
Basically, whatever the results are for me over this month, is not necessarily a reflection of what would be appropriate for me to carry the rest of the time :ahhh :ahhh
Post by: AimlessWanderer on October 01, 2014, 11:30:44 PM
I'm tempted to join... It's 1:23pm here on Oct. 1. Can I still participate?
Go for it :pok: :pok: :D
you just have to finish a little later than the rest of us :P
Post by: kirk13 on October 01, 2014, 11:36:40 PM
Hmm the 84mm apprentice I made here http://forum.multitool.org/index.php/topic,44794.0.html
would be quite a challenge for me to get by with. I dont know if I could go a whole month with it though.
(http://i1117.photobucket.com/albums/k587/Syph007/Apprentice/IMG_7172.jpg)
I better decide today!
I'm going to be interested to see if the Vic copes better than the Wenger with the identical tool load :popcorn:
Post by: derekmac on October 01, 2014, 11:54:52 PM
I'm going to be interested to see if the Vic copes better than the Wenger with the identical tool load :popcorn:Vics rule, and Wengers.... Well they rule too, so... Yeah... :P
:rofl:
Post by: gustophersmob on October 02, 2014, 12:25:17 AM
I'm tempted to join... It's 1:23pm here on Oct. 1. Can I still participate?
Go for it :pok: :pok: :D
you just have to finish a little later than the rest of us :P
Yep, post up what you're using! :cheers:
Post by: gustophersmob on October 02, 2014, 12:26:43 AM
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
Post by: SAK Guy on October 02, 2014, 12:34:28 AM
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Post by: Caranthanus on October 02, 2014, 12:55:43 AM
(http://s9.postimg.org/qoihjilwf/image.jpg)
Wenger Evolution S10
Post by: Caranthanus on October 02, 2014, 01:01:09 AM
I'm in! I will be carrying only a Pioneer but will switch to a Wenger SI on each Wednesday if that is acceptable.... would say that is an absolute must >:D
Post by: tylosaurus on October 02, 2014, 01:01:36 AM
Post by: Caranthanus on October 02, 2014, 01:08:01 AM
I'm in, with a Small Tinker.:worthless:
(http://img515.imageshack.us/img515/3253/welcomebf.gif)
Post by: SAK Guy on October 02, 2014, 01:11:16 AM
I'm in! I will be carrying only a Pioneer but will switch to a Wenger SI on each Wednesday if that is acceptable.... would say that is an absolute must >:D
Had the SI today! :cheers:
Post by: Caranthanus on October 02, 2014, 01:16:50 AM
... a man's gotta do what a man's gotta do ;)I'm in! I will be carrying only a Pioneer but will switch to a Wenger SI on each Wednesday if that is acceptable.... would say that is an absolute must >:D
Had the SI today! :cheers:
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Caranthanus - Wenger s10
fx17 - Small Tinker
Post by: tylosaurus on October 02, 2014, 01:22:44 AM
I'm in, with a Small Tinker.:worthless:
(http://img515.imageshack.us/img515/3253/welcomebf.gif)
I'll get you a pick in the morning. no time right now.
Post by: Toolslinger on October 02, 2014, 01:50:06 AM
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Caranthanus - Wenger s10
fx17 - Small Tinker
Toolslinger - Compact (Red)
Post by: gustophersmob on October 02, 2014, 03:19:33 AM
Used the E01 to walk around outside at night with my daughter. It did quite well. It was actually a little too bright, she kept wanting to stare at it. At 18months old, it was hard to convince her it was a bad idea ;)
Man, the combo tool on the wengerinox has some snap to it, I was surprised to find out.
Post by: Hyatt181 on October 02, 2014, 03:51:17 AM
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Caranthanus - Wenger s10
fx17 - Small Tinker
Toolslinger - Compact (Red)
Sent from my iPhone using Tapatalk
Post by: SAKchief on October 02, 2014, 04:01:32 AM
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Caranthanus - Wenger s10
fx17 - Small Tinker
Toolslinger - Compact (Red)
SAKchief - Manager
Post by: arizonaranchman on October 02, 2014, 05:49:19 AM
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Caranthanus - Wenger s10
fx17 - Small Tinker
Toolslinger - Compact (Red)
SAKchief - Manager
arizonaranchman - silver Alox Pioneer
Post by: arizonaranchman on October 02, 2014, 05:57:33 AM
Later it opened the mail and a package. The next two days are long, busy work days so it'll see lot more action for sure.
(http://i1145.photobucket.com/albums/o501/alpineharleydavidson/Pioneer%20SAK%209-12-14/B6EAA54C-C19F-44D0-837F-6B128CD7F447_zpsayvhgg4s.jpg)
Post by: SAK Guy on October 02, 2014, 06:18:13 AM
Post by: Etherealicer on October 02, 2014, 09:09:08 AM
I'm actually impressed with the small blade on the manager when cutting up my apple in hand. It glides through quite nicely. the thin blade and smaller surface area makes up for the short length.Wait until you want to spread butter or something >:D
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Caranthanus - Wenger s10
fx17 - Small Tinker
Toolslinger - Compact (Red)
SAKchief - Manager
Etherealicer - Midnight Manager (Crusader Mini Spotlight on Wednesdays)
Post by: zoidberg on October 02, 2014, 09:41:12 AM
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Caranthanus - Wenger s10
fx17 - Small Tinker
Toolslinger - Compact (Red)
SAKchief - Manager
Etherealicer - Midnight Manager (Crusader Mini Spotlight on Wednesdays)
zoidberg - Pioneer Apprentice + E01/Wenger SI
Post by: shark_za on October 02, 2014, 11:24:10 AM
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Caranthanus - Wenger s10
fx17 - Small Tinker
Toolslinger - Compact (Red)
SAKchief - Manager
Etherealicer - Midnight Manager (Crusader Mini Spotlight on Wednesdays)
zoidberg - Pioneer Apprentice + E01/Wenger SI
shark_za - Vic Waiter (E01 2nd challenge)
Post by: ducttapetech on October 02, 2014, 11:28:34 AM
Now we will see what today brings.
Nate
Post by: ducttapetech on October 02, 2014, 11:32:16 AM
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Caranthanus - Wenger s10
fx17 - Small Tinker
Toolslinger - Compact (Red)
SAKchief - Manager
Etherealicer - Midnight Manager (Crusader Mini Spotlight on Wednesdays)
zoidberg - Pioneer Apprentice + E01/Wenger SI
shark_za - Vic Waiter (E01 2nd challenge)
Ducttapetech - Compact ( zippo 2nd challenge lol)
Nate
Post by: Gareth on October 02, 2014, 11:45:53 AM
Post by: zoidberg on October 02, 2014, 11:59:37 AM
(https://farm3.staticflickr.com/2944/15230885029_71a2e5cac8.jpg) (https://flic.kr/p/pcUgu2)
Post by: zoidberg on October 02, 2014, 12:00:32 PM
(https://farm4.staticflickr.com/3868/15220318005_0c053e2e8b.jpg) (https://flic.kr/p/pbY7gX)
Post by: ducttapetech on October 02, 2014, 12:15:06 PM
Nate
Post by: derekmac on October 02, 2014, 12:24:09 PM
Post by: Hyatt181 on October 02, 2014, 12:24:45 PM
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Caranthanus - Wenger s10
fx17 - Small Tinker
Toolslinger - Compact (Red)
SAKchief - Manager
Etherealicer - Midnight Manager (Crusader Mini Spotlight on Wednesdays)
zoidberg - Pioneer Apprentice + E01/Wenger SI
shark_za - Vic Waiter (E01 2nd challenge)
Ducttapetech - Compact ( zippo 2nd challenge lol)
Hyatt181- compact
Sent from my iPhone using Tapatalk
Post by: zoidberg on October 02, 2014, 12:26:09 PM
That's a cool pic!
Nate
Bonus points if you can tell me what it is. :pok:
Post by: K13ss4r on October 02, 2014, 12:31:00 PM
Post by: SAK Guy on October 02, 2014, 12:57:45 PM
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
Colt - tinker small
Monrogue - compact
Higgins617 - esquire
hiraethus - OC red Pioneer
derekmac - OC red Pioneer
50ft-trad - Case Scout Jr
Sorel - Alox Bantam
Magentus - Wenger SI Booyah!
Powernoodle - executive
eddie1115 - Tourist
gustophersmob - Wenger Premier
SAK Guy - OC red Pioneer/Wenger SI
Caranthanus - Wenger s10
fx17 - Small Tinker
Toolslinger - Compact (Red)
SAKchief - Manager
Etherealicer - Midnight Manager (Crusader Mini Spotlight on Wednesdays)
zoidberg - Pioneer Apprentice + E01/Wenger SI
shark_za - Vic Waiter (E01 2nd challenge)
Ducttapetech - Compact ( zippo 2nd challenge lol)
Hyatt181- compact
Sent from my iPhone using Tapatalk
Forgot
arizonaranchman - silver Alox Pioneer
Post by: pfrsantos on October 02, 2014, 01:08:58 PM
I'm always in! Led Lenser K1, Leatherman Style PS. I alternate the SAK/knife to complement these. Lately it's been the Alox Cadet. I might trade it for the Sportsman (a few more options but still just 2 layers).
It'll be fairly easy to just use these. I don't have the need for much tools and the small tasks I need to take care off are pretty much covered.
8) 8)
Left the Cadet at home and brought the Sportsman (already used it for making breakfast). I'll keep it for the rest of the month.
Post by: pfrsantos on October 02, 2014, 01:13:54 PM
Higgins617 - Esquire (Coast G10)
SAK Guy - OC Red Pioneer/Wenger SI
----------------enki_ck ????----------------
eddie1115 - Tourist (Princeton Tec Pulsar)
ducttapetech - Compact Plus (Zippo 2nd challenge)
Toolslinger - Compact Plus (Led Lenser P2)
Hyatt181- Compact
colt 1911 - Tinker Small
powernoodle - Executive (Fenix E05)
arizonaranchman - Silver Alox Pioneer
Monrogue - Compact (Photon Freedom Micro)
haackeg - Tinker
SAKchief - Manager
shark_za - Vic Waiter (Fenix E01)
50ft-trad - Case Scout Jr (Nitecore T0) ---- Where's your SAK?! :pok:
Sorel - Alox Bantam
Grass - Sportsman
red_rider_1979 - Rambler Stayglow
hiraethus - OC Red Pioneer (Fenix E05)
Etherealicer - Midnight Manager (Crusader Mini Spotlight on Wednesdays)
coSAK - Compact
zoidberg - Pioneer Apprentice /Wenger SI (Fenix E01)
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
gene stoner - Tinkerer
pfrsantos - Sportsman (Led Lenser K1)
derekmac - OC Red Pioneer
magentus - Wenger SI
cbl51 - Classic
Caranthanus - Wenger S10
fx17 - Small Tinker
Gareth - Golfer (Fenix 01)
K13ss4r - Silver Alox Electrician
I think I got it right...
Need entries for:
enki_ck
Syph007
mrynnr
:pok: :pok:
Please check your name/SAK/flashlight. I followed the entries from the post order and not from the list someone started a few pages ago. Some of you just want to face the challenge, not entering the GAW. Let your names in. If you win, you can choose someone to get the prize or just ask for a new draw.
:salute: :tu: :cheers: 8)
Post by: ducttapetech on October 02, 2014, 01:18:46 PM
I have seen it before, but for the life of me I can not figure it out.That's a cool pic!
Nate
Bonus points if you can tell me what it is. :pok:
Nate
Post by: zoidberg on October 02, 2014, 01:25:01 PM
I have seen it before, but for the life of me I can not figure it out.That's a cool pic!
Nate
Bonus points if you can tell me what it is. :pok:
Nate
Bonus points to anyone then. :pok:
Post by: hiraethus on October 02, 2014, 01:34:44 PM
Post by: arizonaranchman on October 02, 2014, 02:11:42 PM
(http://i1145.photobucket.com/albums/o501/alpineharleydavidson/Pioneer%20SAK%209-12-14/DCE7FF32-3875-4FFE-ADA1-7DEA1A6E69EF_zps4wkcv3hc.jpg)
Post by: pfrsantos on October 02, 2014, 02:19:41 PM
That's a cool pic!
Nate
Bonus points if you can tell me what it is. :pok:
I'd go with Warhammer 40k or Battletech?...
:think: :think:
I'd like to see it fight with this one:
(http://www.lastsummer.com/utg/dforum/uploaded/steam_bucky/201177163449_jdmggorilladress.jpg)
:rofl: :rofl: :rofl: :rofl:
Post by: ducttapetech on October 02, 2014, 02:32:37 PM
Its not Battletech. Just humans and Mechs in battletech. Could be Warhammer.
Nate
Post by: Toolslinger on October 02, 2014, 04:01:42 PM
Used it a fair bit last night to get my fall/winter camping/hiking gear squared away. Snipping threads, threading straps, adjusting MALICE clips, cutting sleeping pad foam, etc. Surprisingly, I was not tempted to grab any other tool to get the work done, Compact handled it all.
Post by: Monrogue on October 02, 2014, 04:59:38 PM
Post by: ducttapetech on October 02, 2014, 05:04:19 PM
Nate
Post by: derekmac on October 02, 2014, 05:07:34 PM
I'm now officially starting the challenge :D The Compact arrived a day early, and it's booted the Rogueneer out of my pocket...at least I get to stare at my precious while sitting at my desk...it's sitting under my monitor. I'd forgotten just how small the Compact is, or at least feels to be when compared to a much larger SAK.You can still touch it, and talk to it, but that's as far as you're allowed to go!! :D
Post by: ducttapetech on October 02, 2014, 05:08:18 PM
Nate
Post by: Monrogue on October 02, 2014, 05:11:01 PM
Post by: pfrsantos on October 02, 2014, 05:17:10 PM
Oh good, as long as I can still fondle it, I'll be happy :whistle:
You know you want it, so here it is:
(https://sp.yimg.com/ib/th?id=HN.608002803450906980&pid=15.1&P=0)
:rofl: :rofl: :rofl: :rofl:
Post by: Monrogue on October 02, 2014, 05:28:59 PM
Oh good, as long as I can still fondle it, I'll be happy :whistle:
You know you want it, so here it is:
(https://sp.yimg.com/ib/th?id=HN.608002803450906980&pid=15.1&P=0)
:rofl: :rofl: :rofl: :rofl:
I love how it's done in that pic :tu: :rofl:
Post by: Monrogue on October 02, 2014, 05:31:44 PM
Post by: AimlessWanderer on October 02, 2014, 06:09:43 PM
That's a cool pic!
Nate
Bonus points if you can tell me what it is. :pok:
Wenger SI :whistle:
:P
Post by: AimlessWanderer on October 02, 2014, 06:14:22 PM
50ft-trad - Case Scout Jr (Nitecore T0) ---- Where's your SAK?! :pok:
Decided to go non-Swiss for the challenge in order to see how well the little Scout Jr holds up for a month .... I already know how well SAKs perform ;)
Post by: Etherealicer on October 02, 2014, 06:21:15 PM
Used the blade for lunch preparation, cutting the soft bread worked better than I thought. Spreading the mustard was annoying but it was softer than the radish mousse, so it worked way better.
(http://forum.multitool.org/index.php?action=dlattach;topic=54888.0;attach=131232;image)
I also completed yesterdays task of exchanging the hard drive. That combo tool is pretty spiffy. Although if there is a really tight screw I'm not sure I can get enough torque. I also used the magnetized tip to recover a screw that had fallen into the case.
Then I had a meeting with a client and took all my notes with the Manager. Not the most comfortable pen, but its working well.
P.S.: I think my cell phone photos are better than the ones I make with my camera :think:
Post by: kirk13 on October 02, 2014, 06:24:52 PM
Post by: pfrsantos on October 02, 2014, 06:33:58 PM
:pok:
gustophersmob - Wenger Premier
Higgins617 - Esquire (Coast G10)
SAK Guy - OC Red Pioneer/Wenger SI
----------------enki_ck ????----------------
eddie1115 - Tourist (Princeton Tec Pulsar)
ducttapetech - Compact Plus (Zippo 2nd challenge)
Toolslinger - Compact Plus (Led Lenser P2)
Hyatt181- Compact
colt 1911 - Tinker Small
powernoodle - Executive (Fenix E05)
arizonaranchman - Silver Alox Pioneer
Monrogue - Compact (Photon Freedom Micro)
haackeg - Tinker
SAKchief - Manager
shark_za - Vic Waiter (Fenix E01)
50ft-trad - Case Scout Jr (Nitecore T0)
Sorel - Alox Bantam
Grass - Sportsman
red_rider_1979 - Rambler Stayglow
hiraethus - OC Red Pioneer (Fenix E05)
Etherealicer - Midnight Manager (Crusader Mini Spotlight on Wednesdays)
coSAK - Compact
zoidberg - Pioneer Apprentice /Wenger SI (Fenix E01)
Kirk13 - Vic 84mm Apprentice/ Wenger a Junior 10
gene stoner - Tinkerer
pfrsantos - Sportsman (Led Lenser K1)
derekmac - OC Red Pioneer
magentus - Wenger SI
cbl51 - Classic
Caranthanus - Wenger S10
fx17 - Small Tinker
Gareth - Golfer (Fenix 01)
K13ss4r - Silver Alox Electrician
I think I got it right...
Need entries for:
enki_ck
Syph007
mrynnr
:pok: :pok:
Please check your name/SAK/flashlight. I followed the entries from the post order and not from the list someone started a few pages ago. Some of you just want to face the challenge, not entering the GAW. Let your names in. If you win, you can choose someone to get the prize or just ask for a new draw.
:salute: :tu: :cheers: 8)
Post by: Etherealicer on October 02, 2014, 06:45:46 PM
| gustophersmob | - | Wenger Premier |
| Higgins617 | - | Esquire (Coast G10) |
| SAK Guy | - | OC Red Pioneer/Wenger SI |
| eddie1115 | - | Tourist (Princeton Tec Pulsar) |
| ducttapetech | - | Compact Plus (Zippo 2nd challenge) |
| Toolslinger | - | Compact Plus (Led Lenser P2) |
| Hyatt181 | - | Compact |
| colt 1911 | - | Tinker Small |
| powernoodle | - | Executive (Fenix E05) |
| arizonaranchman | - | Silver Alox Pioneer |
| Monrogue | - | Compact (Photon Freedom Micro) |
| haackeg | - | Tinker |
| SAKchief | - | Manager |
| shark_za | - | Vic Waiter (Fenix E01) |
| 50ft-trad | - | Case Scout Jr (Nitecore T0) |
| Sorel | - | Alox Bantam |
| Grass | - | Sportsman |
| red_rider_1979 | - | Rambler Stayglow |
| hiraethus | - | OC Red Pioneer (Fenix E05) |
| Etherealicer | - | Midnight Manager (Crusader Mini Spotlight on Wednesdays) (Scale Lights) |
| coSAK | - | Compact |
| zoidberg | - | Pioneer Apprentice /Wenger SI (Fenix E01) |
| Kirk13 | - | Vic 84mm Apprentice/ Wenger a Junior 10 |
| gene stoner | - | Tinkerer |
| pfrsantos | - | Sportsman (Led Lenser K1) |
| derekmac | - | OC Red Pioneer |
| magentus | - | Wenger SI |
| cbl51 | - | Classic |
| Caranthanus | - | Wenger S10 |
| fx17 | - | Small Tinker |
| Gareth | - | Golfer (Fenix E01) |
| K13ss4r | - | Silver Alox Electrician |
Dear Junior OCD Member, this is what a list like that is supposed to look like.
Post by: hiraethus on October 02, 2014, 06:49:55 PM
Post by: AimlessWanderer on October 02, 2014, 06:55:19 PM
I'm disappointed that you haven't sorted the list in some fashion - tool density, maybe. ;)
:rofl:
Shouldn't the lights carried be tabbed across too :pok:
:P
Post by: Toolslinger on October 02, 2014, 06:55:57 PM
I'm disappointed that you haven't sorted the list in some fashion - tool density, maybe. ;)
Alphanumerically by username would have been my approach... :whistle:
Post by: Etherealicer on October 02, 2014, 06:57:20 PM
Yes, and Wenger Wednesday...I'm disappointed that you haven't sorted the list in some fashion - tool density, maybe. ;)
:rofl:
Shouldn't the lights carried be tabbed across too :pok:
:P
However, while pfrsantos completely screwed up the list formating (missing space after Hyatt), he did order the list chronologically...
Post by: Freaver on October 02, 2014, 06:58:49 PM
I'm disappointed that you haven't sorted the list in some fashion - tool density, maybe. ;)
Wait, shouldn't it be sorted alphabetically? :whistle:
Post by: pfrsantos on October 02, 2014, 07:06:11 PM
Yes, and Wenger Wednesday...I'm disappointed that you haven't sorted the list in some fashion - tool density, maybe. ;)
:rofl:
Shouldn't the lights carried be tabbed across too :pok:
:P
However, while pfrsantos completely screwed up the list formating (missing space after Hyatt), he did order the list chronologically...
I did that on purpose, just to see how long you'd resist before "fixing" it.
>:D >:D
Post by: ivan_partizan on October 02, 2014, 08:10:37 PM
Post by: Etherealicer on October 02, 2014, 08:13:44 PM
| gustophersmob | - | Wenger Premier | - | |
| Higgins617 | - | Esquire | - | Coast G10 |
| SAK Guy | - | OC Red Pioneer/Wenger SI | - | |
| eddie1115 | - | Tourist | - | Princeton Tec Pulsar |
| ducttapetech | - | Compact Plus | - | Zippo |
| Toolslinger | - | Compact Plus | - | Led Lenser P2 |
| Hyatt181 | - | Compact | - | |
| colt 1911 | - | Tinker Small | - | |
| powernoodle | - | Executive | - | Fenix E05 |
| arizonaranchman | - | Silver Alox Pioneer | - | |
| Monrogue | - | Compact | - | Photon Freedom Micro |
| haackeg | - | Tinker | - | |
| SAKchief | - | Manager | - | |
| shark_za | - | Vic Waiter | - | Fenix E01 |
| 50ft-trad | - | Case Scout Jr | - | Nitecore T0 |
| Sorel | - | Alox Bantam | - | |
| Grass | - | Sportsman | - | |
| red_rider_1979 | - | Rambler Stayglow | - | |
| hiraethus | - | OC Red Pioneer | - | Fenix E05 |
| Etherealicer | - | Midnight Manager / Crusader Mini Spotlight | - | Scale Lights |
| coSAK | - | Compact | - | |
| zoidberg | - | Pioneer Apprentice /Wenger SI | - | Fenix E01 |
| Kirk13 | - | Vic 84mm Apprentice/ Wenger a Junior 10 | - | |
| gene stoner | - | Tinkerer | - | |
| pfrsantos | - | Sportsman | - | Led Lenser K1 |
| derekmac | - | OC Red Pioneer | - | |
| magentus | - | Wenger SI | - | |
| cbl51 | - | Classic | - | |
| Caranthanus | - | Wenger S10 | - | |
| fx17 | - | Small Tinker | - | |
| Gareth | - | Golfer | - | Fenix 01 |
| K13ss4r | - | Silver Alox Electrician | - |
Post by: Etherealicer on October 02, 2014, 08:14:23 PM
Can I take chanse too?)If you manage to fill in the list :pok:
Post by: Etherealicer on October 02, 2014, 08:15:33 PM
Yeah, that is one of the lamest excuses... EVER. Like the teacher claiming to have made the error on the blackboard on purpose. :rofl:Yes, and Wenger Wednesday...I'm disappointed that you haven't sorted the list in some fashion - tool density, maybe. ;)
:rofl:
Shouldn't the lights carried be tabbed across too :pok:
:P
However, while pfrsantos completely screwed up the list formating (missing space after Hyatt), he did order the list chronologically...
I did that on purpose, just to see how long you'd resist before "fixing" it.
>:D >:D
Post by: pfrsantos on October 02, 2014, 08:43:59 PM
Yeah, that is one of the lamest excuses... EVER. Like the teacher claiming to have made the error on the blackboard on purpose. :rofl:Yes, and Wenger Wednesday...I'm disappointed that you haven't sorted the list in some fashion - tool density, maybe. ;)
:rofl:
Shouldn't the lights carried be tabbed across too :pok:
:P
However, while pfrsantos completely screwed up the list formating (missing space after Hyatt), he did order the list chronologically...
I did that on purpose, just to see how long you'd resist before "fixing" it.
>:D >:D
It's not! I can come up with much lamer excuses!
:twak: :twak:
Post by: colt 1911 on October 02, 2014, 08:46:16 PM
(http://tapatalk.imageshack.com/v2/14/10/02/f1d4f71196375df038c9fb6dfabc58e9.jpg)
Sak's rule !
Post by: Etherealicer on October 02, 2014, 08:47:32 PM
Now that would be an achievment you could be proud off :rofl:Yeah, that is one of the lamest excuses... EVER. Like the teacher claiming to have made the error on the blackboard on purpose. :rofl:Yes, and Wenger Wednesday...I'm disappointed that you haven't sorted the list in some fashion - tool density, maybe. ;)
:rofl:
Shouldn't the lights carried be tabbed across too :pok:
:P
However, while pfrsantos completely screwed up the list formating (missing space after Hyatt), he did order the list chronologically...
I did that on purpose, just to see how long you'd resist before "fixing" it.
>:D >:D
It's not! I can come up with much lamer excuses!
:twak: :twak:
Post by: Etherealicer on October 02, 2014, 08:48:26 PM
Rough day for Tinker Small !So, sitting at the pool watching the bikini babes constitutes to a rough day :think: :rofl:
(http://tapatalk.imageshack.com/v2/14/10/02/f1d4f71196375df038c9fb6dfabc58e9.jpg)
Sak's rule !
Post by: pfrsantos on October 02, 2014, 08:50:22 PM
Now that would be an achievment you could be proud off :rofl:Yeah, that is one of the lamest excuses... EVER. Like the teacher claiming to have made the error on the blackboard on purpose. :rofl:Yes, and Wenger Wednesday...I'm disappointed that you haven't sorted the list in some fashion - tool density, maybe. ;)
:rofl:
Shouldn't the lights carried be tabbed across too :pok:
:P
However, while pfrsantos completely screwed up the list formating (missing space after Hyatt), he did order the list chronologically...
I did that on purpose, just to see how long you'd resist before "fixing" it.
>:D >:D
It's not! I can come up with much lamer excuses!
:twak: :twak:
I'm only proud of all of my achievements, don't care much about achievments...
:pok: :rofl:
Post by: pfrsantos on October 02, 2014, 08:51:03 PM
Rough day for Tinker Small !So, sitting at the pool watching the bikini babes constitutes to a rough day :think: :rofl:
(http://tapatalk.imageshack.com/v2/14/10/02/f1d4f71196375df038c9fb6dfabc58e9.jpg)
Sak's rule !
It's a Small Tinker. Babes make fun of Small Tinkers...
:rofl: :rofl: :rofl: :rofl:
Post by: ivan_partizan on October 02, 2014, 09:06:31 PM
Post by: kirk13 on October 02, 2014, 09:13:06 PM
The Vic Apprentice was back on duty today. Very light day,slicing two or three boxes,used the tooth pick for olive consumption at lunchtime,and later the Phillips to open and close the battery box for a bubble gun.
Post by: Sazabi on October 02, 2014, 10:00:28 PM
The only additional tool I've been carrying is my EAB for work... I don't want to cut zip ties with a 58mm blade....
Post by: magentus on October 02, 2014, 10:08:04 PM
Post by: zoidberg on October 02, 2014, 10:15:48 PM
It would waste your monkey. :twak:That's a cool pic!
Nate
Bonus points if you can tell me what it is. :pok:
I'd go with Warhammer 40k or Battletech?...
:think: :think:
I'd like to see it fight with this one:
(http://www.lastsummer.com/utg/dforum/uploaded/steam_bucky/201177163449_jdmggorilladress.jpg)
:rofl: :rofl: :rofl: :rofl:
Post by: zoidberg on October 02, 2014, 10:17:24 PM
Lol!
Its not Battletech. Just humans and Mechs in battletech. Could be Warhammer.
Nate
Nope. :pok:
Post by: zoidberg on October 02, 2014, 10:18:37 PM
That's a cool pic!
Nate
Bonus points if you can tell me what it is. :pok:
Wenger SI :whistle:
:P
:rofl: :facepalm: :twak:
Post by: enki_ck on October 02, 2014, 10:24:04 PM
Yesterday came my "new" SAK. And I start to use it. Here it is)
(http://forum.multitool.org/index.php?action=dlattach;topic=54888.0;attach=131240;image)
Wow. :o
I'd say that must be the best looking SAK so far. :tu: Don't think they even had names back then, late 1940s probably due to the é in Armée being tilted to the right (1935-51) and the can opener between the current one and the old style one we see up till the early 40s.
Regrettably this one has 3 layers and the limit for the challenge is 2 layers.
You can however enter with some other nice knife from your collection. :tu:
Post by: zoidberg on October 02, 2014, 10:24:49 PM
| gustophersmob | - | Wenger Premier | - | |
| Higgins617 | - | Esquire | - | Coast G10 |
| SAK Guy | - | OC Red Pioneer/Wenger SI | - | |
| eddie1115 | - | Tourist | - | Princeton Tec Pulsar |
| ducttapetech | - | Compact Plus | - | Zippo |
| Toolslinger | - | Compact Plus | - | Led Lenser P2 |
| Hyatt181 | - | Compact | - | |
| colt 1911 | - | Tinker Small | - | |
| powernoodle | - | Executive | - | Fenix E05 |
| arizonaranchman | - | Silver Alox Pioneer | - | |
| Monrogue | - | Compact | - | Photon Freedom Micro |
| haackeg | - | Tinker | - | |
| SAKchief | - | Manager | - | |
| shark_za | - | Vic Waiter | - | Fenix E01 |
| 50ft-trad | - | Case Scout Jr | - | Nitecore T0 |
| Sorel | - | Alox Bantam | - | |
| Grass | - | Sportsman | - | |
| red_rider_1979 | - | Rambler Stayglow | - | |
| hiraethus | - | OC Red Pioneer | - | Fenix E05 |
| Etherealicer | - | Midnight Manager / Crusader Mini Spotlight | - | Scale Lights |
| coSAK | - | Compact | - | |
| zoidberg | - | Pioneer Apprentice /Wenger SI | - | Fenix E01 |
| Kirk13 | - | Vic 84mm Apprentice/ Wenger a Junior 10 | - | |
| gene stoner | - | Tinkerer | - | |
| pfrsantos | - | Sportsman | - | Led Lenser K1 |
| derekmac | - | OC Red Pioneer | - | |
| magentus | - | Wenger SI | - | |
| cbl51 | - | Classic | - | |
| Caranthanus | - | Wenger S10 | - | |
| fx17 | - | Small Tinker | - | |
| Gareth | - | Golfer | - | Fenix 01 |
| K13ss4r | - | Silver Alox Electrician | - |
The random spacing is getting to me. :ahhh
Post by: Monrogue on October 02, 2014, 10:27:33 PM
Post by: Etherealicer on October 02, 2014, 10:29:57 PM
The random spacing is getting to me. :ahhh
Its not random, its individual... We do not like individualism...
| gustophersmob | - | Wenger Premier | - | |
| Higgins617 | - | Esquire | - | Coast G10 |
| SAK Guy | - | OC Red Pioneer/Wenger SI | - | |
| eddie1115 | - | Tourist | - | Princeton Tec Pulsar |
| ducttapetech | - | Compact Plus | - | Zippo |
| Toolslinger | - | Compact Plus | - | Led Lenser P2 |
| Hyatt181 | - | Compact | - | |
| colt 1911 | - | Tinker Small | - | |
| powernoodle | - | Executive | - | Fenix E05 |
| arizonaranchman | - | Silver Alox Pioneer | - | |
| Monrogue | - | Compact | - | Photon Freedom Micro |
| haackeg | - | Tinker | - | |
| SAKchief | - | Manager | - | |
| shark_za | - | Vic Waiter | - | Fenix E01 |
| 50ft-trad | - | Case Scout Jr | - | Nitecore T0 |
| Sorel | - | Alox Bantam | - | |
| Grass | - | Sportsman | - | |
| red_rider_1979 | - | Rambler Stayglow | - | |
| hiraethus | - | OC Red Pioneer | - | Fenix E05 |
| Etherealicer | - | Midnight Manager/Crusader Mini Spotlight | - | Scale Lights |
| coSAK | - | Compact | - | |
| zoidberg | - | Pioneer Apprentice/Wenger SI | - | Fenix E01 |
| Kirk13 | - | Vic 84mm Apprentice/Wenger a Junior 10 | - | |
| gene stoner | - | Tinkerer | - | |
| pfrsantos | - | Sportsman | - | Led Lenser K1 |
| derekmac | - | OC Red Pioneer | - | |
| magentus | - | Wenger SI | - | |
| cbl51 | - | Classic | - | |
| Caranthanus | - | Wenger S10 | - | |
| fx17 | - | Small Tinker | - | |
| Gareth | - | Golfer | - | Fenix 01 |
| K13ss4r | - | Silver Alox Electrician | - |
Post by: derekmac on October 02, 2014, 10:30:21 PM
Don't you mean Beat your monkey? :nanadance:It would waste your monkey. :twak:That's a cool pic!
Nate
Bonus points if you can tell me what it is. :pok:
I'd go with Warhammer 40k or Battletech?...
:think: :think:
I'd like to see it fight with this one:
(http://www.lastsummer.com/utg/dforum/uploaded/steam_bucky/201177163449_jdmggorilladress.jpg)
:rofl: :rofl: :rofl: :rofl:
Post by: enki_ck on October 02, 2014, 10:33:16 PM
You know that's a recipe for disaster, right? :whistle:
Anyways ...
I'm happy I chose the Waiter and not the bantam as I needed a extra small Philips screwdriver today to get inside a battery compartment, a job usually easily dealt by the Rambler, but this time the small flat head living in the corkscrew worked a treat. :cheers:
And the list.
| gustophersmob | - | Wenger Premier | - | Fenix E01 |
| Higgins617 | - | Esquire | - | Coast G10 |
| SAK Guy | - | OC Red Pioneer/Wenger SI | - | |
| eddie1115 | - | Tourist | - | Princeton Tec Pulsar |
| ducttapetech | - | Compact Plus | - | Zippo |
| Toolslinger | - | Compact Plus | - | Led Lenser P2 |
| Hyatt181 | - | Compact | - | |
| colt 1911 | - | Tinker Small | - | |
| powernoodle | - | Executive | - | Fenix E05 |
| arizonaranchman | - | Silver Alox Pioneer | - | |
| Monrogue | - | Compact | - | Photon Freedom Micro |
| haackeg | - | Tinker | - | |
| SAKchief | - | Manager | - | |
| shark_za | - | Vic Waiter | - | Fenix E01 |
| 50ft-trad | - | Case Scout Jr | - | Nitecore T0 |
| Sorel | - | Alox Bantam | - | |
| Grass | - | Sportsman | - | |
| red_rider_1979 | - | Rambler Stayglow | - | |
| hiraethus | - | OC Red Pioneer | - | Fenix E05 |
| Etherealicer | - | Midnight Manager / Crusader Mini Spotlight | - | Scale Lights |
| coSAK | - | Compact | - | |
| zoidberg | - | Pioneer Apprentice /Wenger SI | - | Fenix E01 |
| Kirk13 | - | Vic 84mm Apprentice/ Wenger a Junior 10 | - | |
| gene stoner | - | Tinkerer | - | |
| pfrsantos | - | Sportsman | - | Led Lenser K1 |
| derekmac | - | OC Red Pioneer | - | |
| magentus | - | Wenger SI | - | |
| cbl51 | - | Classic | - | |
| Caranthanus | - | Wenger S10 | - | |
| fx17 | - | Small Tinker | - | |
| Gareth | - | Golfer | - | Fenix 01 |
| K13ss4r | - | Silver Alox Electrician | - | |
| enki_ck | - | Waiter | - | Peak Matterhorn |
Post by: ducttapetech on October 02, 2014, 10:37:46 PM
Nate
Post by: Etherealicer on October 02, 2014, 10:43:21 PM
Corrected :rofl:Tables.Lists :faceplam:
You know that's a recipe for disaster, right? :whistle:
Yeah, I know tapatalk is as bad as Internet Explorer 7
Post by: kirk13 on October 02, 2014, 10:47:02 PM
| gustophersmob | - | Wenger Premier | - | Fenix E01 |
| Higgins617 | - | Esquire | - | Coast G10 |
| SAK Guy | - | OC Red Pioneer/Wenger SI | - | |
| eddie1115 | - | Tourist | - | Princeton Tec Pulsar |
| ducttapetech | - | Compact Plus | - | Zippo |
| Toolslinger | - | Compact Plus | - | Led Lenser P2 |
| Hyatt181 | - | Compact | - | |
| colt 1911 | - | Tinker Small | - | |
| powernoodle | - | Executive | - | Fenix E05 |
| arizonaranchman | - | Silver Alox Pioneer | - | |
| Monrogue | - | Compact | - | Photon Freedom Micro |
| haackeg | - | Tinker | - | |
| SAKchief | - | Manager | - | |
| shark_za | - | Vic Waiter | - | Fenix E01 |
| 50ft-trad | - | Case Scout Jr | - | Nitecore T0 |
| Sorel | - | Alox Bantam | - | |
| Grass | - | Sportsman | - | |
| red_rider_1979 | - | Rambler Stayglow | - | |
| hiraethus | - | OC Red Pioneer | - | Fenix E05 |
| Etherealicer | - | Midnight Manager / Crusader Mini Spotlight | - | Scale Lights |
| coSAK | - | Compact | - | |
| zoidberg | - | Pioneer Apprentice /Wenger SI | - | Fenix E01 |
| Kirk13 | - | Vic 84mm Apprentice/ Wenger Junior 10 | - Fauxston | |
| gene stoner | - | Tinkerer | - | |
| pfrsantos | - | Sportsman | - | Led Lenser K1 |
| derekmac | - | OC Red Pioneer | - | |
| magentus | - | Wenger SI | - | |
| cbl51 | - | Classic | - | |
| Caranthanus | - | Wenger S10 | - | |
| fx17 | - | Small Tinker | - | |
| Gareth | - | Golfer | - | Fenix 01 |
| K13ss4r | - | Silver Alox Electrician | - | |
| enki_ck | - | Waiter | - | Peak Matterhorn |
Post by: enki_ck on October 02, 2014, 10:47:49 PM
Corrected :rofl:Tables.Lists :facepalm:
You know that's a recipe for disaster, right? :whistle:
Yeah, I know tapatalk is as bad as Internet Explorer 7
Well I added myself and gustophersmob's flashlight choice, but from now on you're in charge of keeping it up to date. :P
Post by: Etherealicer on October 02, 2014, 10:54:17 PM
| gustophersmob | - | Wenger Premier | - | Fenix E01 | |
| Higgins617 | - | Esquire | - | Coast G10 | |
| SAK Guy | - | OC Red Pioneer/Wenger SI | - | ||
| eddie1115 | - | Tourist | - | Princeton Tec Pulsar | |
| ducttapetech | - | Compact Plus | - | Zippo | |
| Toolslinger | - | Compact Plus | - | Led Lenser P2 | |
| Hyatt181 | - | Compact | - | ||
| colt 1911 | - | Tinker Small | - | ||
| powernoodle | - | Executive | - | Fenix E05 | |
| arizonaranchman | - | Silver Alox Pioneer | - | ||
| Monrogue | - | Compact | - | Photon Freedom Micro | |
| haackeg | - | Tinker | - | ||
| SAKchief | - | Manager | - | ||
| shark_za | - | Vic Waiter | - | Fenix E01 | |
| 50ft-trad | - | Case Scout Jr | - | Nitecore T0 | |
| Sorel | - | Alox Bantam | - | ||
| Grass | - | Sportsman | - | ||
| red_rider_1979 | - | Rambler Stayglow | - | ||
| hiraethus | - | OC Red Pioneer | - | Fenix E05 | |
| Etherealicer | - | Midnight Manager / Crusader Mini Spotlight | - | Scale Lights | |
| coSAK | - | Compact | - | ||
| zoidberg | - | Pioneer Apprentice /Wenger SI | - | Fenix E01 | |
| Kirk13 | - | Vic 84mm Apprentice/ Wenger Junior 10 | - | Fauxston | |
| gene stoner | - | Tinkerer | - | ||
| pfrsantos | - | Sportsman | - | Led Lenser K1 | |
| derekmac | - | OC Red Pioneer | - | ||
| magentus | - | Wenger SI | - | ||
| cbl51 | - | Classic | - | ||
| Caranthanus | - | Wenger S10 | - | ||
| fx17 | - | Small Tinker | - | ||
| Gareth | - | Golfer | - | Fenix 01 | |
| K13ss4r | - | Silver Alox Electrician | - | ||
| enki_ck | - | Waiter | - | Peak Matterhorn |
Post by: zoidberg on October 02, 2014, 11:03:53 PM
Post by: kirk13 on October 02, 2014, 11:18:59 PM
Post by: hiraethus on October 02, 2014, 11:46:29 PM
Pretty uneventful day for my Pioneer today. Could have done with some scissors or a file to trim a rough nail but made do with my teeth. :( Nice to have some classic Alox in my pocket though. :tu:
Post by: ducttapetech on October 02, 2014, 11:48:52 PM
Is a Lux-pro LP200 mininalist enough for the lite challenge? It uses 1 AA battery and has a max output of 90 lumens.Ummmm.....is this torch OK?
Nate
Nate
Post by: AimlessWanderer on October 03, 2014, 12:28:49 AM
| NAME | ¦ | PRIMARY KNIFE | ¦ | WENGER WEDNESDAY | ¦ | LIGHT | |
| gustophersmob | ¦ | Wenger Premier | ¦ | ¦ | Fenix E01 | ||
| Higgins617 | ¦ | Esquire | ¦ | ¦ | Coast G10 | ||
| SAK Guy | ¦ | OC Red Pioneer | ¦ | Wenger SI | ¦ | Gerber Infinity Ultra | |
| eddie1115 | ¦ | Tourist | ¦ | ¦ | Princeton Tec Pulsar | ||
| ducttapetech | ¦ | Compact Plus | ¦ | ¦ | Maglight Solitaire | ||
| Toolslinger | ¦ | Compact Plus | ¦ | ¦ | Led Lenser P2 | ||
| Hyatt181 | ¦ | Compact | ¦ | ¦ | |||
| colt 1911 | ¦ | Tinker Small | ¦ | ¦ | |||
| powernoodle | ¦ | Executive | ¦ | ¦ | Fenix E05 | ||
| arizonaranchman | ¦ | Silver Alox Pioneer | ¦ | ¦ | |||
| Monrogue | ¦ | Compact | ¦ | ¦ | Photon Freedom Micro | ||
| haackeg | ¦ | Tinker | ¦ | ¦ | |||
| SAKchief | ¦ | Manager | ¦ | ¦ | |||
| shark_za | ¦ | Vic Waiter | ¦ | ¦ | Fenix E01 | ||
| 50ft-trad | ¦ | Case Scout Jr | ¦ | ¦ | Nitecore T0 | ||
| Sorel | ¦ | Alox Bantam | ¦ | ¦ | |||
| Grass | ¦ | Sportsman | ¦ | ¦ | |||
| red_rider_1979 | ¦ | Rambler Stayglow | ¦ | ¦ | |||
| hiraethus | ¦ | OC Red Pioneer | ¦ | ¦ | Fenix E05 | ||
| Etherealicer | ¦ | Midnight Manager | ¦ | Crusader Mini Spotlight | ¦ | Scale Lights | |
| coSAK | ¦ | Compact | ¦ | ¦ | |||
| zoidberg | ¦ | Pioneer Apprentice | ¦ | Wenger SI | ¦ | Fenix E01 | |
| Kirk13 | ¦ | Vic 84mm Apprentice | ¦ | Wenger Junior 10 | ¦ | Fauxston | |
| gene stoner | ¦ | Tinkerer | ¦ | ¦ | |||
| pfrsantos | ¦ | Sportsman | ¦ | ¦ | Led Lenser K1 | ||
| derekmac | ¦ | OC Red Pioneer | ¦ | ¦ | |||
| magentus | ¦ | Wenger SI | ¦ | ¦ | |||
| cbl51 | ¦ | Classic | ¦ | ¦ | |||
| Caranthanus | ¦ | Wenger S10 | ¦ | ¦ | |||
| fx17 | ¦ | Small Tinker | ¦ | ¦ | |||
| Gareth | ¦ | Golfer | ¦ | ¦ | Fenix 01 | ||
| K13ss4r | ¦ | Silver Alox Electrician | ¦ | ¦ | |||
| enki_ck | ¦ | Waiter | ¦ | ¦ | Peak Matterhorn |
Post by: AimlessWanderer on October 03, 2014, 12:31:54 AM
Is a Lux-pro LP200 mininalist enough for the lite challenge? It uses 1 AA battery and has a max output of 90 lumens.Ummmm.....is this torch OK?
Nate
Nate
Everyone who's taking up the challenge seems to be going for 5mm LEDs which are rated WAY less than 90lm. That said, I'd just go for the most basic little torch you have
Post by: ducttapetech on October 03, 2014, 12:47:20 AM
Thanks 50ft.
I will just use my Bic, running out of lighter fluid. Lmao!
Nate
Post by: AimlessWanderer on October 03, 2014, 12:53:01 AM
Kk, what is 5mm? I can pic up a minimag solitare tomarrow at Lowes for 3 bucks.
Thanks 50ft.
Nate
Think ye olde LED rather than the modern (square) high powered emitters.
Old style minimag should be basic enough though I reckon :D
Post by: ducttapetech on October 03, 2014, 12:56:26 AM
Believe it or not, I only had the one torch. Two now. But it was only 6 USD.
For the record, I did not use it for anything.
Nate
Post by: SAK Guy on October 03, 2014, 01:00:41 AM
(http://i833.photobucket.com/albums/zz256/SAKGuy/30dayEDCwithAlt_zpsafddded1.jpg)
Post by: Caranthanus on October 03, 2014, 01:01:25 AM
:b2t: :D
The Wenger s10 continues its honorable challenge: blade, tootpick, tweezers and screwdriver in action ... :salute:
Post by: AimlessWanderer on October 03, 2014, 01:02:51 AM
Yeah., is my weak Gerber Infinity Ultra an ok light for the challenge? It's really basic and not very bright...like me. :D
(http://i833.photobucket.com/albums/zz256/SAKGuy/30dayEDCwithAlt_zpsafddded1.jpg)
Perfect :tu:
Post by: SAK Guy on October 03, 2014, 01:10:46 AM
Post by: gustophersmob on October 03, 2014, 01:15:08 AM
I haven't checked the thread in a few hours, and OCD threw up all over the place! Makes an OCD engineer very happy! :dd:
meanwhile, the wengerinox had a light duty work day, only called into action to section my apple in to delectible bite size pieces
Post by: AimlessWanderer on October 03, 2014, 01:17:49 AM
Post by: enki_ck on October 03, 2014, 01:18:29 AM
Yeah., is my weak Gerber Infinity Ultra an ok light for the challenge? It's really basic and not very bright...like me. :D
Yup, and perfect for it too. :tu: My favorite too in the 5mm format as it can take both AA and AAA batteries.
Kk, what is 5mm? I can pic up a minimag solitare tomarrow at Lowes for 3 bucks.
Thanks 50ft.
Nate
Think ye olde LED rather than the modern (square) high powered emitters.
Old style minimag should be basic enough though I reckon :D
The flashlight part is optional, just an additional challenge I threw in. ;) The best of the 5mm flashlights can maybe break about 10 lumens. But going old style incandescent MiniMag will also work. :cheers:
A bit better than (http://images.clipartof.com/thumbnails/1077212-Clipart-Caveman-Holding-A-Torch-Royalty-Free-Vector-Illustration.jpg)
>:D
Here's a close up of mine.
(http://i1255.photobucket.com/albums/hh627/enki_ck/Flashlight/peakLED.jpg)
Post by: SAK Guy on October 03, 2014, 01:21:09 AM
List updated with Nate's maglight solitaire and SAK guy's infinity ultra :cheers:
Thank you!
Post by: tylosaurus on October 03, 2014, 01:33:43 AM
(https://dl.dropboxusercontent.com/u/25518343/www/knives/Tinker-apple.jpg)
for what it's worth, my light is a Fenix LD01.
Post by: ducttapetech on October 03, 2014, 01:34:03 AM
Lmao!
Nate
Post by: enki_ck on October 03, 2014, 01:48:51 AM
Yes thank you. I am not sure which will be brighter, my Bic or or the solitaire?Well if you want to make it brighter, you can always take the battery out and carry matches in it. :whistle:
Lmao!
Nate
:rofl:
Post by: AimlessWanderer on October 03, 2014, 01:49:29 AM
Post by: ducttapetech on October 03, 2014, 01:50:27 AM
Nate
Post by: Toolslinger on October 03, 2014, 02:13:44 AM
Post by: gustophersmob on October 03, 2014, 02:26:03 AM
Yes thank you. I am not sure which will be brighter, my Bic or or the solitaire?Well if you want to make it brighter, you can always take the battery out and carry matches in it. :whistle:
Lmao!
Nate
:rofl:
Probably better run time, too! >:D
Post by: AimlessWanderer on October 03, 2014, 02:33:50 AM
Post by: enki_ck on October 03, 2014, 02:44:50 AM
I usually have a flashlight on my nightstand, ZL SC51, and grabbed for it. Luckily I remembered before turning it on. Safely stored now. ;)
Post by: eddie1115 on October 03, 2014, 02:45:03 AM
Post by: gustophersmob on October 03, 2014, 03:33:39 AM
BTW, I almost failed the flashlight part yesterday. :doh:
I usually have a flashlight on my nightstand, ZL SC51, and grabbed for it. Luckily I remembered before turning it on. Safely stored now. ;)
Ha, I almost did the same thing this morning. Grabbed the sc52w to check on the daughter, but caught myself in time.
Post by: colt 1911 on October 03, 2014, 03:42:09 AM
(http://tapatalk.imageshack.com/v2/14/10/02/6a3de4d4fc55bb5b56e7935b45f04e7d.jpg)
Sak's rule !
Post by: Monrogue on October 03, 2014, 04:03:18 AM
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20141002_094652_665_zpsxtspbyba.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20141002_094652_665_zpsxtspbyba.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20141002_193009_649_zpse4ng9qbb.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20141002_193009_649_zpse4ng9qbb.jpg.html)
Post by: colt 1911 on October 03, 2014, 05:33:02 AM
Here's my new sexy black scaled Compact, as well as a pic of what I was talking about earlier with the combo tool acting as a phillips driver.
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20141002_094652_665_zpsxtspbyba.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20141002_094652_665_zpsxtspbyba.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20141002_193009_649_zpse4ng9qbb.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20141002_193009_649_zpse4ng9qbb.jpg.html)
Nice !!!
Sak's rule !
Post by: ivan_partizan on October 03, 2014, 06:17:34 AM
You don't mind?
Sorry for my English)
Post by: captain spaulding on October 03, 2014, 06:54:00 AM
Sorry for that gays. Then I will use this one
You don't mind?
:rofl:
Post by: shark_za on October 03, 2014, 07:44:45 AM
Coming up in the next two weeks is a trip to Mozambique where I will do some fishing and a camping expedition with the family.
The minimal setup is what I tend to carry when I travel internationally anyway; should be fine when there.
Some arb information, my Soldier was bought in duty free at Zurich airport, no flight restrictions back then!
I'll put the waiter in my luggage for the flight, not sure how the short light plane hop is going to work. If they take my waiter its not a massive financial loss I guess.
Camping; I usually carry a Trailmaster (Trekker) 111mm that I mainly use for bottles and prying with the odd screwdriver task. Will leave it in the car along with the Leatherman for the heavy work if needed.
Post by: Gareth on October 03, 2014, 09:11:23 AM
No doubt this might ruffle feathers somewhere :D but I'm doing it anyway, so :neener: .....
NAME ¦ PRIMARY KNIFE ¦ WENGER WEDNESDAY ¦ LIGHT gustophersmob ¦ Wenger Premier ¦ ¦ Fenix E01 Higgins617 ¦ Esquire ¦ ¦ Coast G10 SAK Guy ¦ OC Red Pioneer ¦ Wenger SI ¦ Gerber Infinity Ultra eddie1115 ¦ Tourist ¦ ¦ Princeton Tec Pulsar ducttapetech ¦ Compact Plus ¦ ¦ Maglight Solitaire Toolslinger ¦ Compact Plus ¦ ¦ Led Lenser P2 Hyatt181 ¦ Compact ¦ ¦ colt 1911 ¦ Tinker Small ¦ ¦ powernoodle ¦ Executive ¦ ¦ Fenix E05 arizonaranchman ¦ Silver Alox Pioneer ¦ ¦ Monrogue ¦ Compact ¦ ¦ Photon Freedom Micro haackeg ¦ Tinker ¦ ¦ SAKchief ¦ Manager ¦ ¦ shark_za ¦ Vic Waiter ¦ ¦ Fenix E01 50ft-trad ¦ Case Scout Jr ¦ ¦ Nitecore T0 Sorel ¦ Alox Bantam ¦ ¦ Grass ¦ Sportsman ¦ ¦ red_rider_1979 ¦ Rambler Stayglow ¦ ¦ hiraethus ¦ OC Red Pioneer ¦ ¦ Fenix E05 Etherealicer ¦ Midnight Manager ¦ Crusader Mini Spotlight ¦ Scale Lights coSAK ¦ Compact ¦ ¦ zoidberg ¦ Pioneer Apprentice ¦ Wenger SI ¦ Fenix E01 Kirk13 ¦ Vic 84mm Apprentice ¦ Wenger Junior 10 ¦ Fauxston gene stoner ¦ Tinkerer ¦ ¦ pfrsantos ¦ Sportsman ¦ ¦ Led Lenser K1 derekmac ¦ OC Red Pioneer ¦ ¦ magentus ¦ Wenger SI ¦ ¦ cbl51 ¦ Classic ¦ ¦ Caranthanus ¦ Wenger S10 ¦ ¦ fx17 ¦ Small Tinker ¦ ¦ Gareth ¦ Golfer ¦ ¦ Fenix E01 K13ss4r ¦ Silver Alox Electrician ¦ ¦ enki_ck ¦ Waiter ¦ ¦ Peak Matterhorn
All this OCD going on and no-one noticed that the "E" was missing from my Fenix E01. ::)
Golfer got some light work yesterday; opening letters, cutting tags of some new shoes and, most importantly, uncorking a 1986 Vintage Port and cutting some muslin to aid in the decanting. :)
Post by: hiraethus on October 03, 2014, 09:22:29 AM
Sorry for that. Then I will use this one
You don't mind?
Sorry for my English)
Looks like a perfect knife for the challenge. Model 234?
Post by: kirk13 on October 03, 2014, 09:33:45 AM
No doubt this might ruffle feathers somewhere :D but I'm doing it anyway, so :neener: .....
NAME ¦ PRIMARY KNIFE ¦ WENGER WEDNESDAY ¦ LIGHT gustophersmob ¦ Wenger Premier ¦ ¦ Fenix E01 Higgins617 ¦ Esquire ¦ ¦ Coast G10 SAK Guy ¦ OC Red Pioneer ¦ Wenger SI ¦ Gerber Infinity Ultra eddie1115 ¦ Tourist ¦ ¦ Princeton Tec Pulsar ducttapetech ¦ Compact Plus ¦ ¦ Maglight Solitaire Toolslinger ¦ Compact Plus ¦ ¦ Led Lenser P2 Hyatt181 ¦ Compact ¦ ¦ colt 1911 ¦ Tinker Small ¦ ¦ powernoodle ¦ Executive ¦ ¦ Fenix E05 arizonaranchman ¦ Silver Alox Pioneer ¦ ¦ Monrogue ¦ Compact ¦ ¦ Photon Freedom Micro haackeg ¦ Tinker ¦ ¦ SAKchief ¦ Manager ¦ ¦ shark_za ¦ Vic Waiter ¦ ¦ Fenix E01 50ft-trad ¦ Case Scout Jr ¦ ¦ Nitecore T0 Sorel ¦ Alox Bantam ¦ ¦ Grass ¦ Sportsman ¦ ¦ red_rider_1979 ¦ Rambler Stayglow ¦ ¦ hiraethus ¦ OC Red Pioneer ¦ ¦ Fenix E05 Etherealicer ¦ Midnight Manager ¦ Crusader Mini Spotlight ¦ Scale Lights coSAK ¦ Compact ¦ ¦ zoidberg ¦ Pioneer Apprentice ¦ Wenger SI ¦ Fenix E01 Kirk13 ¦ Vic 84mm Apprentice ¦ Wenger Junior 10 ¦ Fauxston gene stoner ¦ Tinkerer ¦ ¦ pfrsantos ¦ Sportsman ¦ ¦ Led Lenser K1 derekmac ¦ OC Red Pioneer ¦ ¦ magentus ¦ Wenger SI ¦ ¦ cbl51 ¦ Classic ¦ ¦ Caranthanus ¦ Wenger S10 ¦ ¦ fx17 ¦ Small Tinker ¦ ¦ Gareth ¦ Golfer ¦ ¦ Fenix E01 K13ss4r ¦ Silver Alox Electrician ¦ ¦ enki_ck ¦ Waiter ¦ ¦ Peak Matterhorn
All this OCD going on and no-one noticed that the "E" was missing from my Fenix E01. ::)
Golfer got some light work yesterday; opening letters, cutting tags of some new shoes and, most importantly, uncorking a 1986 Vintage Port and cutting some muslin to aid in the decanting. :)
Decanting?!
I thought you were supposed to drink it from the neck :drink:
Post by: AimlessWanderer on October 03, 2014, 09:51:39 AM
BTW, I almost failed the flashlight part yesterday. :doh:
I usually have a flashlight on my nightstand, ZL SC51, and grabbed for it. Luckily I remembered before turning it on. Safely stored now. ;)
Ha, I almost did the same thing this morning. Grabbed the sc52w to check on the daughter, but caught myself in time.
My default bedside torch is a Gerber Omnivore, so I'm safe if I slip up with that one :D
Post by: AimlessWanderer on October 03, 2014, 09:52:55 AM
I'm in with the mini gerber, not sure the model.
(http://tapatalk.imageshack.com/v2/14/10/02/6a3de4d4fc55bb5b56e7935b45f04e7d.jpg)
Sak's rule !
I think that might be a Tempo :cheers:
Post by: coSAK on October 03, 2014, 10:03:36 AM
WTF is a "Compact Plus"? :whistle:
Post by: ducttapetech on October 03, 2014, 10:11:23 AM
Nate
Post by: coSAK on October 03, 2014, 10:59:53 AM
A Compact with Plus Scales.
Nate
The Compact always has Plus scales. :pok:
Post by: ivan_partizan on October 03, 2014, 11:10:33 AM
Sorry for that. Then I will use this one
You don't mind?
Sorry for my English)
Looks like a perfect knife for the challenge. Model 234?
Yes,it's 234)
Post by: ducttapetech on October 03, 2014, 11:20:28 AM
They do now. Some of the older ones did not.A Compact with Plus Scales.
Nate
The Compact always has Plus scales. :pok:
Some of it is just that we are old skool, any Sak that had plus scales got the plus added to the name.
Nate
Post by: coSAK on October 03, 2014, 11:24:43 AM
They do now. Some of the older ones did not.A Compact with Plus Scales.
Nate
The Compact always has Plus scales. :pok:
Some of it is just that we are old skool, any Sak that had plus scales got the plus added to the name.
Nate
So you now have a "Compact". Which was an "Old Compact" before adding the Plus scales. :D
Post by: ducttapetech on October 03, 2014, 11:31:04 AM
Nate
Post by: pfrsantos on October 03, 2014, 01:21:53 PM
8) 8)
Added ivan_partizan to the list, need some confirmation on the knife model, though.
:salute: :tu:
Still waiting on these two... Come on!
:pok: Syph007
:pok: mrynnr
| NAME | ¦ | PRIMARY KNIFE | ¦ | WENGER WEDNESDAY | ¦ | LIGHT | |
| gustophersmob | ¦ | Wenger Premier | ¦ | ¦ | Fenix E01 | ||
| Higgins617 | ¦ | Esquire | ¦ | ¦ | Coast G10 | ||
| SAK Guy | ¦ | OC Red Pioneer | ¦ | Wenger SI | ¦ | Gerber Infinity Ultra | |
| eddie1115 | ¦ | Tourist | ¦ | ¦ | Princeton Tec Pulsar | ||
| ducttapetech | ¦ | Compact Plus | ¦ | ¦ | Maglight Solitaire | ||
| Toolslinger | ¦ | Compact Plus | ¦ | ¦ | Led Lenser P2 | ||
| Hyatt181 | ¦ | Compact | ¦ | ¦ | |||
| colt 1911 | ¦ | Tinker Small | ¦ | ¦ | Gerber Tempo | ||
| powernoodle | ¦ | Executive | ¦ | ¦ | Fenix E05 | ||
| arizonaranchman | ¦ | Silver Alox Pioneer | ¦ | ¦ | |||
| Monrogue | ¦ | Compact | ¦ | ¦ | Photon Freedom Micro | ||
| haackeg | ¦ | Tinker | ¦ | ¦ | |||
| SAKchief | ¦ | Manager | ¦ | ¦ | |||
| shark_za | ¦ | Vic Waiter | ¦ | ¦ | Fenix E01 | ||
| 50ft-trad | ¦ | Case Scout Jr | ¦ | ¦ | Nitecore T0 | ||
| Sorel | ¦ | Alox Bantam | ¦ | ¦ | |||
| Grass | ¦ | Sportsman | ¦ | ¦ | |||
| red_rider_1979 | ¦ | Rambler Stayglow | ¦ | ¦ | |||
| hiraethus | ¦ | OC Red Pioneer | ¦ | ¦ | Fenix E05 | ||
| Etherealicer | ¦ | Midnight Manager | ¦ | Crusader Mini Spotlight | ¦ | Scale Lights | |
| coSAK | ¦ | Compact | ¦ | ¦ | |||
| zoidberg | ¦ | Pioneer Apprentice | ¦ | Wenger SI | ¦ | Fenix E01 | |
| kirk13 | ¦ | Vic 84mm Apprentice | ¦ | Wenger Junior 10 | ¦ | Fauxston | |
| gene stoner | ¦ | Tinkerer | ¦ | ¦ | |||
| pfrsantos | ¦ | Sportsman | ¦ | ¦ | Led Lenser K1 | ||
| derekmac | ¦ | OC Red Pioneer | ¦ | ¦ | |||
| magentus | ¦ | Wenger SI | ¦ | ¦ | |||
| cbl51 | ¦ | Classic | ¦ | ¦ | |||
| Caranthanus | ¦ | Wenger S10 | ¦ | ¦ | |||
| fx17 | ¦ | Small Tinker | ¦ | ¦ | |||
| Gareth | ¦ | Golfer | ¦ | ¦ | Fenix E01 | ||
| K13ss4r | ¦ | Silver Alox Electrician | ¦ | ¦ | |||
| enki_ck | ¦ | Waiter | ¦ | ¦ | Peak Matterhorn | ||
| ivan_partizan | ¦ | Model 234 | ¦ | ¦ |
Post by: AimlessWanderer on October 03, 2014, 01:47:54 PM
Post by: pfrsantos on October 03, 2014, 01:51:31 PM
You forgot to add Colt's Gerber Tempo :pok: ;)
Added, thanks! I just used the last list entry and didn't check for new items.
:salute: :cheers:
Post by: Singh on October 03, 2014, 02:20:59 PM
(http://i1199.photobucket.com/albums/aa466/sx975/005_zps2bd49c93.jpg)
Post by: magentus on October 03, 2014, 02:23:53 PM
What's your usual EDC?
Post by: colt 1911 on October 03, 2014, 02:24:58 PM
I'm in with the mini gerber, not sure the model.
(http://tapatalk.imageshack.com/v2/14/10/02/6a3de4d4fc55bb5b56e7935b45f04e7d.jpg)
Sak's rule !
I think that might be a Tempo :cheers:
Yes ! Thank you,
Sak's rule !
Post by: colt 1911 on October 03, 2014, 02:27:31 PM
You forgot to add Colt's Gerber Tempo :pok: ;)
Added, thanks! I just used the last list entry and didn't check for new items.
:salute: :cheers:
Thanks ! Cheers
Sak's rule !
Post by: Toolslinger on October 03, 2014, 02:37:36 PM
Post by: Singh on October 03, 2014, 03:54:09 PM
That's hardcore Shamus :salute:
What's your usual EDC?
Usually this. The tools are carried in a pocket skinth.
(http://i1199.photobucket.com/albums/aa466/sx975/009_zps85fceb95.jpg)
Post by: magentus on October 03, 2014, 03:59:52 PM
Post by: SAK Guy on October 03, 2014, 04:00:13 PM
Post by: SAK Guy on October 03, 2014, 05:01:57 PM
Post by: ducttapetech on October 03, 2014, 05:56:06 PM
:p
(http://img.tapatalk.com/d/14/10/03/qe5ese8u.jpg)
I wonder if Mag-lite will update this one like are doing with the others. These new Mag Lites they are coming out with are bad ass and for a good price.
Nate
Post by: Higgins617 on October 03, 2014, 05:57:38 PM
Post by: magentus on October 03, 2014, 06:12:24 PM
Post by: Etherealicer on October 03, 2014, 06:16:53 PM
Only task was cutting some bread. Harder and larger than yesterdays bread, the blade didn't reach half way in. However, it still worked.
Post by: pfrsantos on October 03, 2014, 06:29:52 PM
Bought my girlfriend a Solitare, thought it was defective :facepalm:
I had a girlfriend like that once. I dumped her...
:whistle:
Post by: Higgins617 on October 03, 2014, 06:47:09 PM
Post by: pfrsantos on October 03, 2014, 06:55:43 PM
I just spit my coke out hahahaha. I thought it was defective, not her. I assumed the output would be close to the little coast light I have, no such luck.
I knew that, I'm just silly.
:D :D
Sportsman helped me cut the grilled lamb cutlets at lunch.
(https://sp.yimg.com/ib/th?id=HN.608049996553913041&pid=15.1&P=0)
Post by: Higgins617 on October 03, 2014, 06:58:49 PM
Post by: Monrogue on October 03, 2014, 07:05:38 PM
Post by: pfrsantos on October 03, 2014, 07:15:00 PM
That is a fantastic looking meal right there my friend.
Not the real one, but very close. And the taste was great! Haven't had these in a while, really enjoyed it! With a stout beer to help it go down.
(https://sp.yimg.com/ib/th?id=HN.607994608655009085&pid=15.1&P=0)
:drool: :drool:
Post by: powernoodle on October 03, 2014, 07:47:47 PM
How's that for uber minimal? [Classic SD and Photon light].
That's about as good as it gets. And for the average person who carries nothing, it would handle 99% of their daily needs.
Post by: kirk13 on October 03, 2014, 09:26:05 PM
Yawn! Only thing the Appie got used for today was cutting open the packaging for my new noise reducing earphones!
Post by: Caranthanus on October 03, 2014, 10:05:29 PM
Btw, Wenger's can opener is great nail cleaner ... >:D
Post by: Corwyn on October 03, 2014, 10:29:02 PM
Bought my girlfriend a Solitare, thought it was defective :facepalm:
Got a Solitaire last week in a flea market. Paid 2 Euros for it. Thought it was defective too... my Siglite and pocket laser blow it away... let alone a proper flashlight - still bought it.. gotta have a Maglite ::)
Post by: PTRSAK on October 04, 2014, 12:54:01 AM
Just got the Mag-Lite Solitaire. Man this thing is BEAST!!! All 2 lumens of it. I had to put my shades over the lens of the camera just to take a pic of it.
:p
(http://img.tapatalk.com/d/14/10/03/qe5ese8u.jpg)
I wonder if Mag-lite will update this one like are doing with the others. These new Mag Lites they are coming out with are bad ass and for a good price.
Nate
There is a Solitaire LED... http://www.maglite.com/maglite_solitaire_led.asp
another option is the Led Lenser A2 http://www.ledlenser.com/uk/flashlights/a2/
Your Pic brings back memories...
Put white scales on the Compact, call it a Golfer (c1989) and that pairing was my EDC for many years in the '90s.
They were joined at the keyrings and rode in my pocket so long that the corkscrew wore grooves halfway through the case of the Solitaire and the split ring nearly wore through the hole in the "birdhead" spacer on the SAK.
Post by: derekmac on October 04, 2014, 01:11:53 AM
Sent from my iPad using Tapatalk
Post by: gustophersmob on October 04, 2014, 01:52:05 AM
Helped cut packing tape to open a shipping container after we did drop tests on it.
I'm already missing my alox though... The flex in the wengerinox's handles just feels so...cheap, really. I'm wondering if I should have gone with an alox bantam.
The light has been no problem, though. Really, the E01 always did everything I needed. I just wanted newer toys!
Post by: gustophersmob on October 04, 2014, 01:53:11 AM
I've done well so far, but really wanted to cheat today. :facepalm: I needed scissors to cut a small zip tie on a wire loom, but since I'm carrying my Pioneer, I was missing my SAK scissors. :( I really wanted to go and grab my Climber, but I resisted. It took me FOREVER to find a bloody pair small enough to do the job too.
Sent from my iPad using Tapatalk
I've had pretty good luck using the awl on my pioneer to cut zip ties. I actually prefer that to scissors. If the awl doesn't work, I usually go for some diagonal cutters.
Post by: colt 1911 on October 04, 2014, 02:03:27 AM
Sak's rule !
Post by: ducttapetech on October 04, 2014, 02:37:01 AM
Cut up some cardboard boxs. A bunch of rope and string.
(http://img.tapatalk.com/d/14/10/04/7ybevype.jpg)
(http://img.tapatalk.com/d/14/10/04/u8epadyr.jpg)
(http://img.tapatalk.com/d/14/10/04/aby2ajuj.jpg)
Nate
Post by: Hyatt181 on October 04, 2014, 04:22:34 AM
It was able to open the towel dispenser at work that I usually can't open with my cybertool's bottle opener (to wide. )
I'll have to consider making a cyber yeoman now.
Sent from my iPhone using Tapatalk
Post by: Singh on October 04, 2014, 04:23:20 AM
(http://i1199.photobucket.com/albums/aa466/sx975/007_zps6d190e0f.jpg)
Post by: getahl on October 04, 2014, 04:51:03 AM
Post by: nate j on October 04, 2014, 05:49:01 AM
+1. 93mm awl is killer on zip ties.I've done well so far, but really wanted to cheat today. :facepalm: I needed scissors to cut a small zip tie on a wire loom, but since I'm carrying my Pioneer, I was missing my SAK scissors. :( I really wanted to go and grab my Climber, but I resisted. It took me FOREVER to find a bloody pair small enough to do the job too.
Sent from my iPad using Tapatalk
I've had pretty good luck using the awl on my pioneer to cut zip ties. I actually prefer that to scissors.
Post by: arizonaranchman on October 04, 2014, 07:01:30 AM
Post by: Fast Bill on October 04, 2014, 08:36:52 AM
Post by: kirk13 on October 04, 2014, 09:04:12 AM
Do any of you remember the Top Gear race across London? STIG takes the Tube,Hamster cycles,Jezza uses a boat(!) and Slow drives...
And,to most Londoners anyway,the result was no surprise....STIG won!
In the same way,I fear this thread may prove that we're proving we don't need big multi layer SAKs and MTs!
Post by: AimlessWanderer on October 04, 2014, 01:15:05 PM
I had a worrying thought last night...
Do any of you remember the Top Gear race across London? STIG takes the Tube,Hamster cycles,Jezza uses a boat(!) and Slow drives...
And,to most Londoners anyway,the result was no surprise....STIG won!
In the same way,I fear this thread may prove that we're proving we don't need big multi layer SAKs and MTs!
Well, I was kind of thinking about this last night and considered officially bailing out of the challenge.
I need to go and do a few jobs on the boat soon ... and I know the minimalist carry won't be of any use. I could use dedicated tools, but that will just mean I get less done than I would with a multi as I'll be working slower. Same in the garden if the weather is half decent tomorrow. A multitool will help speed things up.
A lot of the time, going minimalist is not a major obstacle - but I'm just forcing myself to be inefficient when it matters. I've annoyed a lot of friends in the pat by waiting till they've gone to fetch the correct tool before pulling out a multitool and having the job well under way or even completed by the time they got back >:D Now all I've done is lowered myself to their level in terms of having to spend longer getting a dedicated tool than I would actually doing what needs doing.
Minimalist carry is better than nothing for generally pottering about, but there's a reason I have a pocket load of stuff on me most of the time .... it works! At the very least, I really ought to take normal carry when going to work on the boat, or having an hour or two in the garden, or doing any kind of project really even if I drop back to the Scout Jr and Nitecore T0 afterwards. Only reason I haven't already failed or bailed, is it's raining so I haven't done any project work yet ... :-\
Post by: powernoodle on October 04, 2014, 01:42:53 PM
Oh my GOD WHAT THE smurf WAS I THINKING?!?! Gahhhhh!!!
I Want my SURGE!!!
I think we are beginning to separate into two groups. The first consists of guys like Nate who actually use their larger SAKs and MTs on a daily basis or on the job. This minimalist thing is going to be hard on them, because it entails not having the proper tool on hand or having to keep walking to the tool box.
The other group, which I fall into, use a SAK merely as a daily convenience item - opening a package, snipping a thread or tightening a screw once in a while. This minimalist thing is not so difficult for us, as even a Classic SD will handle these things just fine. For this second group, the only "burden" of going minimalist is that we just have to give up the fun of carrying something larger or switching between SAKs. That's not an inconsequential burden for a true SAK addict, but its not nearly as difficult as giving up a Surge that you rely on all day.
So we guys in the second group definitely have an advantage when it comes to remaining faithful for the whole 30 days. Its only been 4 days, but I'm having no difficulty whatsoever with carrying only the Executive. And I partly wish that I had gone even smaller (Classic SD).
Post by: AimlessWanderer on October 04, 2014, 02:12:59 PM
I approached this challenge with the view of opening packages at work, and general life tasks, and figured what the heck lets try it. However I nipped next door earlier this morning to see what the racket was my mate was making. He was trying to do a temporary bodge fix of the leak on his shed roof till the weather's better so he can fix it properly, so of course I started giving him a hand. Even though we were in his shed with all his dedicated tools, there were several times when a screwdriver, pliers and a more robust knife on a tool in my pocket would have saved us some faffing about rooting through drawers and toolboxes for a tool.
This wasn't a planned job, or even "my problem", but a simple example of where minimalist carry was an obstacle to achieving what needed to be achieved. The temporary fix has been done well enough for now, but having my MP400 and a decent folder for example would probably have saved us 10 minutes. The rain wasn't too heavy outside, but 10 minutes could have been the difference between electrical tools/equipment inside getting damaged or not.
So far the only real impairment has been to my "comfort level" as nothing has significantly suffered as a result, but with some of the jobs I have in front of me, I'm looking at the Case knife and little torch and wondering why on earth I'm doing this
Post by: colt 1911 on October 04, 2014, 02:59:22 PM
I think that's a fair appraisal Noodle :tu: I wouldn't normally miss file or saw most of the time, though there are tasks I wouldn't like to go into without having one just in case. Pliers, scissors and a slightly more robust knife on the other hand, seem to be more frequently needed items. Screwdrivers tend to fall somwhere between the two for me.
I approached this challenge with the view of opening packages at work, and general life tasks, and figured what the heck lets try it. However I nipped next door earlier this morning to see what the racket was my mate was making. He was trying to do a temporary bodge fix of the leak on his shed roof till the weather's better so he can fix it properly, so of course I started giving him a hand. Even though we were in his shed with all his dedicated tools, there were several times when a screwdriver, pliers and a more robust knife on a tool in my pocket would have saved us some faffing about rooting through drawers and toolboxes for a tool.
This wasn't a planned job, or even "my problem", but a simple example of where minimalist carry was an obstacle to achieving what needed to be achieved. The temporary fix has been done well enough for now, but having my MP400 and a decent folder for example would probably have saved us 10 minutes. The rain wasn't too heavy outside, but 10 minutes could have been the difference between electrical tools/equipment inside getting damaged or not.
So far the only real impairment has been to my "comfort level" as nothing has significantly suffered as a result, but with some of the jobs I have in front of me, I'm looking at the Case knife and little torch and wondering why on earth I'm doing this
I fall into this same category, it's basically going to be a pain in the ass. I will never be a minimalist, I believe in being prepared ! I guess we are all a
Little twisted, suffering for 30 days.
Sak's rule !
Post by: SAK Guy on October 04, 2014, 04:40:07 PM
Suffering out on the porch yesterday..... :D
(http://i833.photobucket.com/albums/zz256/SAKGuy/HCcigar1_zpsf6e6952b.jpg?t=1412341974)
Walked down to the gate this morning.....
Post by: shark_za on October 04, 2014, 05:09:35 PM
So I often use my knives and tools for a traditional snack, biltong.
A style of jerky that is synonymous with South Africa, so much so that the local distributor of Victorinox etched "Biltong Knife" on a whole bunch of 100mm Gardeners and probably sold a ton of them.
I normally use one of these as a speSmurfpillst tool but today my Waiter saw duty in this role.
Post by: ivan_partizan on October 04, 2014, 05:18:48 PM
Post by: enki_ck on October 04, 2014, 05:43:40 PM
I may have failed yesterday. I was disassembling the and storing for winter the net I had put up against hale in my garden. Last time most of the non power tools jobs were done with the ST300. Now I had my pockets full of dedicated screwdrivers, pliers, ...
I needed to cut some heavy duty cable ties and I wasn't gonna do that with a 84mm SAK. ;) So I took my EAB and swapped the regular blade for a hooked one. I did use the combo tool of the Vic Waiter to unscrew the screw that holds the blade in if that gives me some bonus points. :whistle:
Post by: arizonaranchman on October 04, 2014, 05:46:28 PM
Is this PT-1AA in the category of flashlight that fits the challenge? I've been carrying this for 3+ yrs, so it's my usual anyways, but I don't know what a 5mm flashlight is by definition. This is an LED by Streamlight. Single AA battery. If it fits the challenge you can add it to the "Official Equipment List" for me please :)
Also, for those of us that need a dedicated tool(s) for a specific task I'm wondering if FOR THAT TASK if they may be allowed an exemption to perform that task with another SAK and not have to withdraw? As 50ft-trad and a few others were saying it's creating a hardship in certain situations especially when common sense says you need a certain tool for a given task... As long as the Participant states his departure from his Minimalist tool of choice on that situation/event. What say ye?
For example I know for me I'd prefer someone defer to another SAK w/pliers than have to grab a pair of Craftsman pliers from the tool chest. Or when you know you're going out into the garden to do this or that and know you need a saw and there's just no way around it... Why not a pocket a Farmer for an hour rather than a pruning saw from the garage? Just note it in your "Daily Report" here when you check in at the end of the day? This may help some of the participants survive the month rather than having to pull out completely. Just a suggestion... :)
(http://i1145.photobucket.com/albums/o501/alpineharleydavidson/Pioneer%20SAK%209-12-14/7845EBCA-AA93-4DFB-AB47-7F61AB3B8C2D_zpsvqjfhoep.jpg)
Post by: gustophersmob on October 04, 2014, 06:14:15 PM
Oh my GOD WHAT THE smurf WAS I THINKING?!?! Gahhhhh!!!
I Want my SURGE!!!
I think we are beginning to separate into two groups. The first consists of guys like Nate who actually use their larger SAKs and MTs on a daily basis or on the job. This minimalist thing is going to be hard on them, because it entails not having the proper tool on hand or having to keep walking to the tool box.
The other group, which I fall into, use a SAK merely as a daily convenience item - opening a package, snipping a thread or tightening a screw once in a while. This minimalist thing is not so difficult for us, as even a Classic SD will handle these things just fine. For this second group, the only "burden" of going minimalist is that we just have to give up the fun of carrying something larger or switching between SAKs. That's not an inconsequential burden for a true SAK addict, but its not nearly as difficult as giving up a Surge that you rely on all day.
So we guys in the second group definitely have an advantage when it comes to remaining faithful for the whole 30 days. Its only been 4 days, but I'm having no difficulty whatsoever with carrying only the Executive. And I partly wish that I had gone even smaller (Classic SD).
Good thoughts here. I fall mostly into the 2nd category as well. Though, when I do need bigger and better than the EDC pioneer, I usually prefer dedicated tools anyway. So, I don't feel "minimalist" with my daily carry, even though compared to many, I suppose I might be.
Honestly, after these last couple of days, I think I could manage just fine with a bantam as EDC. I just prefer the slightly larger tools on the pioneer. I also vastly prefer alox, but that doesn't make it a "need."
Post by: gustophersmob on October 04, 2014, 06:18:04 PM
I had a worrying thought last night...
Do any of you remember the Top Gear race across London? STIG takes the Tube,Hamster cycles,Jezza uses a boat(!) and Slow drives...
And,to most Londoners anyway,the result was no surprise....STIG won!
In the same way,I fear this thread may prove that we're proving we don't need big multi layer SAKs and MTs!
Well, I was kind of thinking about this last night and considered officially bailing out of the challenge.
I need to go and do a few jobs on the boat soon ... and I know the minimalist carry won't be of any use. I could use dedicated tools, but that will just mean I get less done than I would with a multi as I'll be working slower. Same in the garden if the weather is half decent tomorrow. A multitool will help speed things up.
A lot of the time, going minimalist is not a major obstacle - but I'm just forcing myself to be inefficient when it matters. I've annoyed a lot of friends in the pat by waiting till they've gone to fetch the correct tool before pulling out a multitool and having the job well under way or even completed by the time they got back >:D Now all I've done is lowered myself to their level in terms of having to spend longer getting a dedicated tool than I would actually doing what needs doing.
Minimalist carry is better than nothing for generally pottering about, but there's a reason I have a pocket load of stuff on me most of the time .... it works! At the very least, I really ought to take normal carry when going to work on the boat, or having an hour or two in the garden, or doing any kind of project really even if I drop back to the Scout Jr and Nitecore T0 afterwards. Only reason I haven't already failed or bailed, is it's raining so I haven't done any project work yet ... :-\
Yeah, sounds like this may be tougher on you, since you have a more consistent need for heavier duty tools.
Though I like the minimalist idea, if I had the need for the multi I would be carrying one. I wouldn't like being handicapped in what I can do just to save a couple ounces.
But, I guess that's where the challenge part comes in ;)
Post by: Sazabi on October 04, 2014, 06:31:04 PM
I wonder if Mag-lite will update this one like are doing with the others. These new Mag Lites they are coming out with are bad ass and for a good price.
Nate
Nate, they actually do make a Mag-lite Solitaire LED version now, for what it's worth. :tu:
Post by: enki_ck on October 04, 2014, 06:47:02 PM
But not in the old school 5mm version, that one has a modern LED.I wonder if Mag-lite will update this one like are doing with the others. These new Mag Lites they are coming out with are bad ass and for a good price.
Nate
Nate, they actually do make a Mag-lite Solitaire LED version now, for what it's worth. :tu:
Post by: Monrogue on October 04, 2014, 07:59:11 PM
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20141004_100644_217_zpsatw11xou.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20141004_100644_217_zpsatw11xou.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20141004_100723_377_zpsek4fa5hz.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20141004_100723_377_zpsek4fa5hz.jpg.html)
Post by: Monrogue on October 04, 2014, 08:02:23 PM
I had a worrying thought last night...
Do any of you remember the Top Gear race across London? STIG takes the Tube,Hamster cycles,Jezza uses a boat(!) and Slow drives...
And,to most Londoners anyway,the result was no surprise....STIG won!
In the same way,I fear this thread may prove that we're proving we don't need big multi layer SAKs and MTs!
I had this worry as well Kirky...wondering if this would confirm my thoughts that I can get by just fine with something like the Compact and a simple plier based MT rather than the more robust Rogueneer and MTs I carry. I don't like that idea :ahhh
Post by: Monrogue on October 04, 2014, 08:14:48 PM
Post by: Etherealicer on October 04, 2014, 08:19:48 PM
Nothing special today. Used the tiny manager to clean the mowing robots blades.
Post by: ducttapetech on October 04, 2014, 08:36:55 PM
I am thinking the opposite, it is showing me how much time is lost and how inefficient it is not carrying a bigger Sak or Multi. but if it gets right down to it, you only need a knife. And a tool box.I had a worrying thought last night...
Do any of you remember the Top Gear race across London? STIG takes the Tube,Hamster cycles,Jezza uses a boat(!) and Slow drives...
And,to most Londoners anyway,the result was no surprise....STIG won!
In the same way,I fear this thread may prove that we're proving we don't need big multi layer SAKs and MTs!
I had this worry as well Kirky...wondering if this would confirm my thoughts that I can get by just fine with something like the Compact and a simple plier based MT rather than the more robust Rogueneer and MTs I carry. I don't like that idea :ahhh
Nate
Post by: gustophersmob on October 04, 2014, 08:42:20 PM
Post by: ducttapetech on October 04, 2014, 08:44:58 PM
Nate
Post by: Toolslinger on October 04, 2014, 08:53:51 PM
Day 4 so far has seen it trimming tags with the scissors. Tomorrow should be interesting as I'm out all day in the woods. I'll have dedicated tools, but I usually carry a bigger SAK or Multi. We'll see how it goes.
Post by: magentus on October 04, 2014, 09:14:13 PM
Hang in there everyone, I hope you're enjoying the challenge as much as I am.
Post by: ducttapetech on October 04, 2014, 09:18:07 PM
I have been enjoying the challenge. But there has been more than a few times it has been trying.
Nate
Post by: gustophersmob on October 04, 2014, 09:27:05 PM
That is a cool pick!
Nate
Thanks!
Post by: gustophersmob on October 04, 2014, 09:27:33 PM
End of day 4 - it's the weekend and my family have colds so I've been in nursing all day. Prepared lunch and tea with my SI and it bit me tonight! Blood everywhere though it's only a small cut.
Hang in there everyone, I hope you're enjoying the challenge as much as I am.
Hope everyone feels better :-\
Post by: arizonaranchman on October 04, 2014, 09:48:08 PM
Slicing some hot links for the skillet :)
Post by: ducttapetech on October 04, 2014, 09:50:19 PM
Nate
Post by: SAK Guy on October 04, 2014, 10:06:01 PM
Mmmmmmmm
Nate
+1 yummy!
Post by: kirk13 on October 04, 2014, 10:22:54 PM
Gee this is boring stuff.
The Appie done the business again today,what little there was to do!
Used the Phillips to fasten a N-scale Scania into its box. Because the threads on the screws run straight to metal,these can be more difficult than the usual self tappers into plastic...but no problems what so ever.
Knife was used to despatch straps on packing cartons,while reminding some 'urban youth' of Lu-Tze' rule no.3,as well as releasing my new Delemont Evo11 from captivity when I got home :tu:
Post by: mrynnr on October 04, 2014, 10:33:43 PM
Post by: AimlessWanderer on October 05, 2014, 02:17:23 AM
As for what I actually carried, I used the awl for a minor repair on an e-cig cartomiser, and used the torch a couple of times too
Post by: derekmac on October 05, 2014, 03:28:22 AM
I'll have to remember to try and use the awl to see how it fares on them. Thanks for the tips guys!+1. 93mm awl is killer on zip ties.I've done well so far, but really wanted to cheat today. :facepalm: I needed scissors to cut a small zip tie on a wire loom, but since I'm carrying my Pioneer, I was missing my SAK scissors. :( I really wanted to go and grab my Climber, but I resisted. It took me FOREVER to find a bloody pair small enough to do the job too.
Sent from my iPad using Tapatalk
I've had pretty good luck using the awl on my pioneer to cut zip ties. I actually prefer that to scissors.
Sent from my iPad using Tapatalk
Post by: getahl on October 05, 2014, 04:27:04 AM
Post by: zoidberg on October 05, 2014, 10:37:44 AM
Post by: kirk13 on October 05, 2014, 12:31:32 PM
Oh my GOD WHAT THE smurf WAS I THINKING?!?! Gahhhhh!!!
I Want my SURGE!!!
I think we are beginning to separate into two groups. The first consists of guys like Nate who actually use their larger SAKs and MTs on a daily basis or on the job. This minimalist thing is going to be hard on them, because it entails not having the proper tool on hand or having to keep walking to the tool box.
The other group, which I fall into, use a SAK merely as a daily convenience item - opening a package, snipping a thread or tightening a screw once in a while. This minimalist thing is not so difficult for us, as even a Classic SD will handle these things just fine. For this second group, the only "burden" of going minimalist is that we just have to give up the fun of carrying something larger or switching between SAKs. That's not an inconsequential burden for a true SAK addict, but its not nearly as difficult as giving up a Surge that you rely on all day.
So we guys in the second group definitely have an advantage when it comes to remaining faithful for the whole 30 days. Its only been 4 days, but I'm having no difficulty whatsoever with carrying only the Executive. And I partly wish that I had gone even smaller (Classic SD).
The thing that's been interesting for me is to note how my work enviroment has changed,and the impact that's had on my carry.
One of the prime reasons I replaced my PST was the number of shelves I was having to repair,or bend back into usable shape,and the PST's handles where cutting my hands badly. The Wave gave me a massive increase in tasks I could tackle,rather than having to refer them to either our house services,or go scrounge a speSmurfpillst tool.
Another key factor has been a practical improvement in terms of how the shop floor is run. There is now a full screwdriver set,which our girls have claimed possessive ownership of;likewise scissors. My fixation with redundancy of tools is the nessesity it once was!
When I done the Fit test a year ago,I realised I could probably get away with a Rambler and LM Mini,and maybe keep a full sized Multi in my locker for those times where the smurf does hit the fan.
....
I've been very pleased with the one layer SAKs so far,but three or four years ago,I'd never have coped!
Post by: magentus on October 05, 2014, 05:48:04 PM
End of day 4 - it's the weekend and my family have colds so I've been in nursing all day. Prepared lunch and tea with my SI and it bit me tonight! Blood everywhere though it's only a small cut.
Hang in there everyone, I hope you're enjoying the challenge as much as I am.
Hope everyone feels better :-\
Thanks Gust and Nate - they're both on the mend now thanks to my great nursing abilities (!) Plus I did literally bleed for them.
Food prep again mainly today - opened a can of chickpeas to make hummous and lots of veg prep.
I really like the SI but I'm still missing my usual.
:salute:
Post by: SAK Guy on October 05, 2014, 05:57:03 PM
Post by: gustophersmob on October 05, 2014, 06:27:40 PM
End of day 4 - it's the weekend and my family have colds so I've been in nursing all day. Prepared lunch and tea with my SI and it bit me tonight! Blood everywhere though it's only a small cut.
Hang in there everyone, I hope you're enjoying the challenge as much as I am.
Hope everyone feels better :-\
Thanks Gust and Nate - they're both on the mend now thanks to my great nursing abilities (!) Plus I did literally bleed for them.
Food prep again mainly today - opened a can of chickpeas to make hummous and lots of veg prep.
I really like the SI but I'm still missing my usual.
:salute:
Good to hear they're getting better!
Post by: gustophersmob on October 05, 2014, 06:29:59 PM
I used the tweezers on the Wengerinox to remove a splinter from my daughter's heel. Normally, if I had a splinter, I would just dig it out with the blade. On her, I would have had to go get some regular tweezers.
So, my minimalist carry was more efficient and saved me a trip :think:
Post by: Gareth on October 05, 2014, 06:42:30 PM
Oh my GOD WHAT THE smurf WAS I THINKING?!?! Gahhhhh!!!
I Want my SURGE!!!
I think we are beginning to separate into two groups. The first consists of guys like Nate who actually use their larger SAKs and MTs on a daily basis or on the job. This minimalist thing is going to be hard on them, because it entails not having the proper tool on hand or having to keep walking to the tool box.
The other group, which I fall into, use a SAK merely as a daily convenience item - opening a package, snipping a thread or tightening a screw once in a while. This minimalist thing is not so difficult for us, as even a Classic SD will handle these things just fine. For this second group, the only "burden" of going minimalist is that we just have to give up the fun of carrying something larger or switching between SAKs. That's not an inconsequential burden for a true SAK addict, but its not nearly as difficult as giving up a Surge that you rely on all day.
So we guys in the second group definitely have an advantage when it comes to remaining faithful for the whole 30 days. Its only been 4 days, but I'm having no difficulty whatsoever with carrying only the Executive. And I partly wish that I had gone even smaller (Classic SD).
A very fair assessment I'd say. Now normally I'd fall into the first group as I work as a Maintenance Engineer and a MT has been a vital part of my tool kit for years now, I just couldn't imagine turning up to work without one.
However, I'm on a break from work just now (on purpose ;)) so a MT has become a bit of a luxury for a while. In this spirit my Golfer has managed all my needs for the last few days and I'd say it'll likely handle most of them for the rest of the month. Time will tell though. :D
Post by: Etherealicer on October 05, 2014, 06:50:30 PM
Stayed home, did nothing...
Post by: kirk13 on October 05, 2014, 06:51:13 PM
(http://i782.photobucket.com/albums/yy104/kirk130013/imagejpg3_zps054c2e24.jpg) (http://s782.photobucket.com/user/kirk130013/media/imagejpg3_zps054c2e24.jpg.html)
Post by: enki_ck on October 06, 2014, 12:23:20 AM
Day 5
Stayed home, did nothing...
Add beer and it's :dd:
Post by: Higgins617 on October 06, 2014, 12:25:32 AM
Post by: ducttapetech on October 06, 2014, 12:27:45 AM
But the main thing today that was totally not related to my SAK use, was I got shoot a freaken 50 Pounder mountain howitzer!!!! BOO YAH!!!!
(http://img.tapatalk.com/d/14/10/06/4uzu6y9y.jpg)
Nate
Post by: kirk13 on October 06, 2014, 12:31:44 AM
Kinda light day today. Used the combo tool to open a can of chili, used to hook to thread some twine through a trap. Blade did some cutting.
But the main thing today that was totally not related to my SAK use, was I got shoot a freaken 50 Pounder mountain howitzer!!!! BOO YAH!!!!
(http://img.tapatalk.com/d/14/10/06/4uzu6y9y.jpg)
Nate
COOL!
Post by: AimlessWanderer on October 06, 2014, 12:32:43 AM
Tried it, but it's really not doing me any favours. It's proving to be a handicap in my normal daily life, so I'm reverting back to "normality" as of tomorrow. This exercise has confirmed to me that me carrying the stuff I normally do is justified, and it wouldn't be sensible for me to carry this on. I considerd just carrying extra at certain times, but the reality is I don't always know in advance when the extras will be needed, and makes much more sense to bow out now before I find myself too compromised
Good luck to everyone else :cheers:
Post by: enki_ck on October 06, 2014, 12:37:15 AM
Added the missing entries to the list.
If you're not on it but have entered, speak up and we'll correct that. :hatsoff:
| NAME | ¦ | PRIMARY KNIFE | ¦ | WENGER WEDNESDAY | ¦ | LIGHT | |
| gustophersmob | ¦ | Wenger Premier | ¦ | ¦ | Fenix E01 | ||
| Higgins617 | ¦ | Esquire | ¦ | ¦ | Coast G10 | ||
| SAK Guy | ¦ | OC Red Pioneer | ¦ | Wenger SI | ¦ | Gerber Infinity Ultra | |
| eddie1115 | ¦ | Tourist | ¦ | ¦ | Princeton Tec Pulsar | ||
| ducttapetech | ¦ | Compact Plus | ¦ | ¦ | Mag-Lite Solitaire | ||
| Toolslinger | ¦ | Compact Plus | ¦ | ¦ | Led Lenser P2 | ||
| Hyatt181 | ¦ | Compact | ¦ | ¦ | |||
| colt 1911 | ¦ | Tinker Small | ¦ | ¦ | Gerber Tempo | ||
| powernoodle | ¦ | Executive | ¦ | ¦ | Fenix E05 | ||
| arizonaranchman | ¦ | Silver Alox Pioneer | ¦ | ¦ | |||
| Monrogue | ¦ | Compact | ¦ | ¦ | Photon Freedom Micro | ||
| haackeg | ¦ | Tinker | ¦ | ¦ | |||
| SAKchief | ¦ | Manager | ¦ | ¦ | |||
| shark_za | ¦ | Vic Waiter | ¦ | ¦ | Fenix E01 | ||
| 50ft-trad | ¦ | Case Scout Jr | ¦ | ¦ | Nitecore T0 | ||
| Sorel | ¦ | Alox Bantam | ¦ | ¦ | |||
| Grass | ¦ | Sportsman | ¦ | ¦ | |||
| red_rider_1979 | ¦ | Rambler Stayglow | ¦ | ¦ | |||
| hiraethus | ¦ | OC Red Pioneer | ¦ | ¦ | Fenix E05 | ||
| Etherealicer | ¦ | Midnight Manager | ¦ | Crusader Mini Spotlight | ¦ | Scale Lights | |
| coSAK | ¦ | Compact | ¦ | ¦ | |||
| zoidberg | ¦ | Pioneer Apprentice | ¦ | Wenger SI | ¦ | Fenix E01 | |
| kirk13 | ¦ | Vic 84mm Apprentice | ¦ | Wenger Junior 10 | ¦ | Fauxston | |
| gene stoner | ¦ | Tinkerer | ¦ | ¦ | |||
| pfrsantos | ¦ | Sportsman | ¦ | ¦ | Led Lenser K1 | ||
| derekmac | ¦ | OC Red Pioneer | ¦ | ¦ | |||
| magentus | ¦ | Wenger SI | ¦ | ¦ | |||
| cbl51 | ¦ | Classic | ¦ | ¦ | |||
| Caranthanus | ¦ | Wenger S10 | ¦ | ¦ | |||
| fx17 | ¦ | Small Tinker | ¦ | ¦ | |||
| Gareth | ¦ | Golfer | ¦ | ¦ | Fenix E01 | ||
| K13ss4r | ¦ | Silver Alox Electrician | ¦ | ¦ | |||
| enki_ck | ¦ | Waiter | ¦ | ¦ | Peak Matterhorn | ||
| ivan_partizan | ¦ | Model 234 | ¦ | ¦ | |||
| shamus | ¦ | Classic SD | ¦ | ¦ | Photon Freedom | ||
| getahl | ¦ | Classic SD | ¦ | ¦ | |||
| Fast Bill | ¦ | Spartan | ¦ | ¦ | |||
| mrynnr | ¦ | Wenger SI | ¦ | ¦ | |||
| Syph007 | ¦ | 84mm Apprentice | ¦ | ¦ |
Post by: enki_ck on October 06, 2014, 12:39:08 AM
BTW, did you hit that barn? :D
Post by: AimlessWanderer on October 06, 2014, 12:40:56 AM
| NAME | ¦ | PRIMARY KNIFE | ¦ | WENGER WEDNESDAY | ¦ | LIGHT | |
| gustophersmob | ¦ | Wenger Premier | ¦ | ¦ | Fenix E01 | ||
| Higgins617 | ¦ | Esquire | ¦ | ¦ | Coast G10 | ||
| SAK Guy | ¦ | OC Red Pioneer | ¦ | Wenger SI | ¦ | Gerber Infinity Ultra | |
| eddie1115 | ¦ | Tourist | ¦ | ¦ | Princeton Tec Pulsar | ||
| ducttapetech | ¦ | Compact Plus | ¦ | ¦ | Mag-Lite Solitaire | ||
| Toolslinger | ¦ | Compact Plus | ¦ | ¦ | Led Lenser P2 | ||
| Hyatt181 | ¦ | Compact | ¦ | ¦ | |||
| colt 1911 | ¦ | Tinker Small | ¦ | ¦ | Gerber Tempo | ||
| powernoodle | ¦ | Executive | ¦ | ¦ | Fenix E05 | ||
| arizonaranchman | ¦ | Silver Alox Pioneer | ¦ | ¦ | |||
| Monrogue | ¦ | Compact | ¦ | ¦ | Photon Freedom Micro | ||
| haackeg | ¦ | Tinker | ¦ | ¦ | |||
| SAKchief | ¦ | Manager | ¦ | ¦ | |||
| shark_za | ¦ | Vic Waiter | ¦ | ¦ | Fenix E01 | ||
| ¦ | ¦ | ¦ | |||||
| Sorel | ¦ | Alox Bantam | ¦ | ¦ | |||
| Grass | ¦ | Sportsman | ¦ | ¦ | |||
| red_rider_1979 | ¦ | Rambler Stayglow | ¦ | ¦ | |||
| hiraethus | ¦ | OC Red Pioneer | ¦ | ¦ | Fenix E05 | ||
| Etherealicer | ¦ | Midnight Manager | ¦ | Crusader Mini Spotlight | ¦ | Scale Lights | |
| coSAK | ¦ | Compact | ¦ | ¦ | |||
| zoidberg | ¦ | Pioneer Apprentice | ¦ | Wenger SI | ¦ | Fenix E01 | |
| kirk13 | ¦ | Vic 84mm Apprentice | ¦ | Wenger Junior 10 | ¦ | Fauxston | |
| gene stoner | ¦ | Tinkerer | ¦ | ¦ | |||
| pfrsantos | ¦ | Sportsman | ¦ | ¦ | Led Lenser K1 | ||
| derekmac | ¦ | OC Red Pioneer | ¦ | ¦ | |||
| magentus | ¦ | Wenger SI | ¦ | ¦ | |||
| cbl51 | ¦ | Classic | ¦ | ¦ | |||
| Caranthanus | ¦ | Wenger S10 | ¦ | ¦ | |||
| fx17 | ¦ | Small Tinker | ¦ | ¦ | |||
| Gareth | ¦ | Golfer | ¦ | ¦ | Fenix E01 | ||
| K13ss4r | ¦ | Silver Alox Electrician | ¦ | ¦ | |||
| enki_ck | ¦ | Waiter | ¦ | ¦ | Peak Matterhorn | ||
| ivan_partizan | ¦ | Model 234 | ¦ | ¦ | |||
| shamus | ¦ | Classic SD | ¦ | ¦ | Photon Freedom | ||
| getahl | ¦ | Classic SD | ¦ | ¦ | |||
| Fast Bill | ¦ | Spartan | ¦ | ¦ | |||
| mrynnr | ¦ | Wenger SI | ¦ | ¦ | |||
| Syph007 | ¦ | 84mm Apprentice | ¦ | ¦ |
Post by: ducttapetech on October 06, 2014, 12:44:43 AM
Very cool, Nate. :oNah. The CSA was shooting blanks for the crowd. Still, it was fun as hell!!! Some much power. And this is one of the smaller field pieces.
BTW, did you hit that barn? :D
Nate
Post by: enki_ck on October 06, 2014, 12:48:32 AM
:oops: Sorry guys, I'm out :salute:
Tried it, but it's really not doing me any favours. It's proving to be a handicap in my normal daily life, so I'm reverting back to "normality" as of tomorrow. This exercise has confirmed to me that me carrying the stuff I normally do is justified, and it wouldn't be sensible for me to carry this on. I considerd just carrying extra at certain times, but the reality is I don't always know in advance when the extras will be needed, and makes much more sense to bow out now before I find myself too compromised
Good luck to everyone else :cheers:
Noooooo ... :ahhh
Now I feel tempted too. :twak:
Well to be honest I've been tempted every single day since it started. I really miss the scissors. Occasionally the pliers. I'm starting to feel like a Neanderthal considering how much I've been using my teeth lately for stuff that would usually be done with the tools I had on me. :facepalm:
Post by: Toolslinger on October 06, 2014, 01:24:52 AM
Went hiking all day. Stayed with just the Compact.
Used the scissors to cut moleskin to prevent blisters for a fellow hiker in new boots.
Used the blade to cut cheese and salami and spread mustard on bread at lunch.
Used the hook to remove the lid on my pot to check water when boiling it to make tea.
One of my fellow hikers (whom I know usually carries a SAK) had his small Tinker with him today :tu:. I helped him out by sharpening the blade on it while waiting for our water to boil. On a random note, my Compact nicked his pinkie finger at lunch when he borrowed it for mustard duty. Very small clean cut, but it bled a surprising amount.
Post by: AimlessWanderer on October 06, 2014, 01:26:47 AM
:oops: Sorry guys, I'm out :salute:
Tried it, but it's really not doing me any favours. It's proving to be a handicap in my normal daily life, so I'm reverting back to "normality" as of tomorrow. This exercise has confirmed to me that me carrying the stuff I normally do is justified, and it wouldn't be sensible for me to carry this on. I considerd just carrying extra at certain times, but the reality is I don't always know in advance when the extras will be needed, and makes much more sense to bow out now before I find myself too compromised
Good luck to everyone else :cheers:
Noooooo ... :ahhh
Now I feel tempted too. :twak:
Well to be honest I've been tempted every single day since it started. I really miss the scissors. Occasionally the pliers. I'm starting to feel like a Neanderthal considering how much I've been using my teeth lately for stuff that would usually be done with the tools I had on me. :facepalm:
Sorry Nik :-[
I was missing the pliers and scissors too much, plus a more capable knife blade. The torch actually handled what I needed quite well despite being only modest lumens, but not having the other tools wasn't working out. It's kind of like a "don't use your car for a month" challenge, some would manage fine, some would struggle but cope, but for others it just wouldn't be practical :-\
Post by: Caranthanus on October 06, 2014, 01:27:44 AM
:rofl::oops: Sorry guys, I'm out :salute:
Tried it, but it's really not doing me any favours. It's proving to be a handicap in my normal daily life, so I'm reverting back to "normality" as of tomorrow. This exercise has confirmed to me that me carrying the stuff I normally do is justified, and it wouldn't be sensible for me to carry this on. I considerd just carrying extra at certain times, but the reality is I don't always know in advance when the extras will be needed, and makes much more sense to bow out now before I find myself too compromised
Good luck to everyone else :cheers:
Noooooo ... :ahhh
Now I feel tempted too. :twak:
Well to be honest I've been tempted every single day since it started. I really miss the scissors. Occasionally the pliers. I'm starting to feel like a Neanderthal considering how much I've been using my teeth lately for stuff that would usually be done with the tools I had on me. :facepalm:
One just have to believe ... in SAK :D
(http://s28.postimg.org/xnarm7oil/image.jpg)
:gimme:
Post by: SAK Guy on October 06, 2014, 01:37:47 AM
Kinda light day today. Used the combo tool to open a can of chili, used to hook to thread some twine through a trap. Blade did some cutting.
But the main thing today that was totally not related to my SAK use, was I got shoot a freaken 50 Pounder mountain howitzer!!!! BOO YAH!!!!
(http://img.tapatalk.com/d/14/10/06/4uzu6y9y.jpg)
Nate
Excellent!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :cheers: :cheers: :cheers: :cheers:
Post by: getahl on October 06, 2014, 01:40:46 AM
Post by: gustophersmob on October 06, 2014, 01:43:18 AM
:oops: Sorry guys, I'm out :salute:
Tried it, but it's really not doing me any favours. It's proving to be a handicap in my normal daily life, so I'm reverting back to "normality" as of tomorrow. This exercise has confirmed to me that me carrying the stuff I normally do is justified, and it wouldn't be sensible for me to carry this on. I considerd just carrying extra at certain times, but the reality is I don't always know in advance when the extras will be needed, and makes much more sense to bow out now before I find myself too compromised
Good luck to everyone else :cheers:
:cry: Sorry to see you go, but I understand. Especially when it starts to impact you negatively. It was meant as a challenge, not a hindrance. :cheers:
So now your mission, should you choose to accept it, is to keep coming back to make fun of the rest of us >:D
Post by: gustophersmob on October 06, 2014, 01:44:26 AM
:oops: Sorry guys, I'm out :salute:
Tried it, but it's really not doing me any favours. It's proving to be a handicap in my normal daily life, so I'm reverting back to "normality" as of tomorrow. This exercise has confirmed to me that me carrying the stuff I normally do is justified, and it wouldn't be sensible for me to carry this on. I considerd just carrying extra at certain times, but the reality is I don't always know in advance when the extras will be needed, and makes much more sense to bow out now before I find myself too compromised
Good luck to everyone else :cheers:
Noooooo ... :ahhh
Now I feel tempted too. :twak:
Well to be honest I've been tempted every single day since it started. I really miss the scissors. Occasionally the pliers. I'm starting to feel like a Neanderthal considering how much I've been using my teeth lately for stuff that would usually be done with the tools I had on me. :facepalm:
But that's what teeth are for! You could use pliers to chew your food too, but you don't now do you? :twak:
;)
Post by: gustophersmob on October 06, 2014, 01:45:14 AM
Kinda light day today. Used the combo tool to open a can of chili, used to hook to thread some twine through a trap. Blade did some cutting.
But the main thing today that was totally not related to my SAK use, was I got shoot a freaken 50 Pounder mountain howitzer!!!! BOO YAH!!!!
(http://img.tapatalk.com/d/14/10/06/4uzu6y9y.jpg)
Nate
Now that is cool! How did you get to shoot one?
Post by: AimlessWanderer on October 06, 2014, 02:04:33 AM
:oops: Sorry guys, I'm out :salute:
Tried it, but it's really not doing me any favours. It's proving to be a handicap in my normal daily life, so I'm reverting back to "normality" as of tomorrow. This exercise has confirmed to me that me carrying the stuff I normally do is justified, and it wouldn't be sensible for me to carry this on. I considerd just carrying extra at certain times, but the reality is I don't always know in advance when the extras will be needed, and makes much more sense to bow out now before I find myself too compromised
Good luck to everyone else :cheers:
:cry: Sorry to see you go, but I understand. Especially when it starts to impact you negatively. It was meant as a challenge, not a hindrance. :cheers:
So now your mission, should you choose to accept it, is to keep coming back to make fun of the rest of us >:D
That's wierd .... I'd already set myself the same task :P :D >:D
Post by: ducttapetech on October 06, 2014, 02:07:39 AM
I was at the Indian Mound Festival, some Civil War Reinactors where there. I got to talking to them at there camp. One thing lead to another and the next thing I know I was shooting a 50 pounder. And I might be an Artilleryman or an Infantryman next spring. Lol!Kinda light day today. Used the combo tool to open a can of chili, used to hook to thread some twine through a trap. Blade did some cutting.
But the main thing today that was totally not related to my SAK use, was I got shoot a freaken 50 Pounder mountain howitzer!!!! BOO YAH!!!!
(http://img.tapatalk.com/d/14/10/06/4uzu6y9y.jpg)
Nate
Now that is cool! How did you get to shoot one?
Nate
Post by: enki_ck on October 06, 2014, 02:07:47 AM
Yup, that was a given. :P:oops: Sorry guys, I'm out :salute:
Tried it, but it's really not doing me any favours. It's proving to be a handicap in my normal daily life, so I'm reverting back to "normality" as of tomorrow. This exercise has confirmed to me that me carrying the stuff I normally do is justified, and it wouldn't be sensible for me to carry this on. I considerd just carrying extra at certain times, but the reality is I don't always know in advance when the extras will be needed, and makes much more sense to bow out now before I find myself too compromised
Good luck to everyone else :cheers:
:cry: Sorry to see you go, but I understand. Especially when it starts to impact you negatively. It was meant as a challenge, not a hindrance. :cheers:
So now your mission, should you choose to accept it, is to keep coming back to make fun of the rest of us >:D
That's wierd .... I'd already set myself the same task :P :D >:D
I feel a few Spirit-ed posts coming our way soon. ;)
Post by: harronek on October 06, 2014, 02:22:09 AM
:oops: Sorry guys, I'm out :salute:
Tried it, but it's really not doing me any favours. It's proving to be a handicap in my normal daily life, so I'm reverting back to "normality" as of tomorrow. This exercise has confirmed to me that me carrying the stuff I normally do is justified, and it wouldn't be sensible for me to carry this on. I considerd just carrying extra at certain times, but the reality is I don't always know in advance when the extras will be needed, and makes much more sense to bow out now before I find myself too compromised
Good luck to everyone else :cheers:
I suspect the shine is starting to wear off this idea for many , and those
30 days are starting to look like a speck in the distance :)
Thats why I didn't sign up to this .
I know from experience that a SAK can't handle all of my requirements at work .
The weekends and around home a SAK is all I'd ever need , but at work through a lot of trial and error I've settled on a Surge and a small fixed blade knife , a SAK can't compete with those two efficiently when time is money .
Please don't get me wrong I love my SAK's , but a mans got to know his limitations .
If there had been an " After Hours , Weekend Minimalist Challenge " then I would have enthusiastically signed up .
Everyones daily knife and tool requirements are different , so don't feel bad about not making the 30 days . I suspect your like me and that the knife and tool that you carry actually gets used for tasks greater than opening letters and trimming fingernails :)
Ken
Post by: derekmac on October 06, 2014, 02:26:59 AM
Sent from my iPad using Tapatalk
Post by: SAK Guy on October 06, 2014, 02:28:16 AM
(http://s2.hubimg.com/u/1712173_f520.jpg)
Post by: Monrogue on October 06, 2014, 05:12:14 AM
Post by: arizonaranchman on October 06, 2014, 07:53:30 AM
Post by: mrynnr on October 06, 2014, 08:08:20 AM
Post by: hiraethus on October 06, 2014, 12:46:26 PM
Post by: ivan_partizan on October 06, 2014, 12:52:06 PM
Yesterday I lost it(
Good luck to everyone else
Post by: coSAK on October 06, 2014, 12:58:41 PM
And as always to slice my „apple a day“.
Last days some nail care.
The corkscrew and the combo tool weren't used since the challange started.
So far I'm not really missing anything. :D
Post by: shark_za on October 06, 2014, 01:28:22 PM
The fishing and camping coming up are the real make or breakers.
Post by: pfrsantos on October 06, 2014, 01:31:48 PM
Sorry guys, I'm out
Yesterday I lost it(
Good luck to everyone else
I hope you mean you lost your temper and grabbed a SwissChamp or a CyberTool. That SAK you showed us was gorgeous, hope you manage to get it back if in fact you misplaced it...
:-\
Post by: kirk13 on October 06, 2014, 01:51:11 PM
Sorry guys, I'm out
Yesterday I lost it(
Good luck to everyone else
I hope you mean you lost your temper and grabbed a SwissChamp or a CyberTool. That SAK you showed us was gorgeous, hope you manage to get it back if in fact you misplaced it...
:-\
+1!
Post by: gene stoner on October 06, 2014, 04:08:26 PM
Post by: SAK Guy on October 06, 2014, 04:16:58 PM
So far I have suffered through life with with just my two layers but next month I well be shopping for a champ or ct41.
:2tu: I'll probably tote my Swiss Champ a lot next month as well. Picking out grassburrs with my fingers sux but I will manage.
Post by: magentus on October 06, 2014, 04:27:26 PM
I have to say that aesthetically I can't fault the SI - it really is gorgeous. I'm looking forward to handling my bg boy again though :whistle:
Post by: eddie1115 on October 06, 2014, 04:56:43 PM
Post by: pfrsantos on October 06, 2014, 05:14:16 PM
Post by: Gareth on October 06, 2014, 07:07:18 PM
The E01 on the other had we very useful for looking under sofas.
Post by: AimlessWanderer on October 06, 2014, 07:42:53 PM
Post by: tylosaurus on October 06, 2014, 08:54:38 PM
Post by: Monrogue on October 06, 2014, 10:31:23 PM
Post by: Etherealicer on October 06, 2014, 10:51:44 PM
No challenge for the Midnight Manager (letter opening, apple cutting).
Post by: AimlessWanderer on October 06, 2014, 10:55:05 PM
:angel:
Post by: colt 1911 on October 06, 2014, 11:04:03 PM
:think: Gerber Diesel I think tomorrow ... :whistle:
:angel:
Yeah the Spirit was missed heavily today. Several trips back and forth to the shop for pliers today.
Sak's rule !
Post by: colt 1911 on October 06, 2014, 11:05:37 PM
Sak's rule !
Post by: derekmac on October 06, 2014, 11:25:33 PM
I do miss having one on me around home though, as I do use it more here than at work.
Sent from my Nokia Lumia 1020 using Tapatalk
Post by: Etherealicer on October 06, 2014, 11:31:36 PM
So far this challenge has me realizing that I don't really need to carry anything other than a SAK.Yep, me too. Although a larger blade would be nice and OHO and a screwdriver that has a larger handle for a better grip. I think as long as there are no torque screws I can pretty much do everything with the Midnight Manager. The magnetic combo tool is actually very handy if you have to fish out a screw from a computer case (something the CyberTool lacks).
I do miss having one on me around home though, as I do use it more here than at work.
Sent from my Nokia Lumia 1020 using Tapatalk
Post by: Toolslinger on October 06, 2014, 11:47:22 PM
So far this challenge has me realizing that I don't really need to carry anything other than a SAK.
Same here. I'm also realizing I can get away with only a few tools on that SAK. Which makes me wonder why I've been carrying so much bulk/weight (comparatively speaking) for so long. Also, why I've spent so much time and money on MT's and SAKs... :facepalm:
Before this challenge (ie the day before the first thread started) I had been debating carrying only my SwissChamp for a month or more and documenting each tool that I used. The goal being to mod it down to the absolute minimum toolset (eliminating unused ones) possible. I probably would have ended up with a Climber. :facepalm:
Post by: AimlessWanderer on October 06, 2014, 11:52:02 PM
Temptation is your friend ... no, wait ... your enemy ... no, wait ... your labrador .....
What was I on about? :think:
Oh yeah, I reckon there'll be a few more joining me by the end of the month >:D
Post by: kirk13 on October 06, 2014, 11:57:12 PM
Blah! Sunday seen no action what so ever,as to honest,I went nowhere and done nothing...not that I'm complaining :tu:
Today...eh,well I have sinned :twak: I couldn't resist giving my new Delemont Evo11 an outing. Well,it's still two layers!
I did have to use both my big LED Lenser to light up targets at the club tonight,and I needed the P.U.G to adjust my scope,but I couldn't have done these tasks with a SAK or the Fauxton
Post by: AimlessWanderer on October 07, 2014, 12:01:47 AM
Report of days five and six:
Blah! Sunday seen no action what so ever,as to honest,I went nowhere and done nothing...not that I'm complaining :tu:
Today...eh,well I have sinned :twak: I couldn't resist giving my new Delemont Evo11 an outing. Well,it's still two layers!
I did have to use both my big LED Lenser to light up targets at the club tonight,and I needed the P.U.G to adjust my scope,but I couldn't have done these tasks with a SAK or the Fauxton
P.U.G .... ?
Post by: kirk13 on October 07, 2014, 12:04:12 AM
Report of days five and six:
Blah! Sunday seen no action what so ever,as to honest,I went nowhere and done nothing...not that I'm complaining :tu:
Today...eh,well I have sinned :twak: I couldn't resist giving my new Delemont Evo11 an outing. Well,it's still two layers!
I did have to use both my big LED Lenser to light up targets at the club tonight,and I needed the P.U.G to adjust my scope,but I couldn't have done these tasks with a SAK or the Fauxton
P.U.G .... ?
Pretty Useful Guntool
Post by: AimlessWanderer on October 07, 2014, 12:08:53 AM
So in a single day you've sinned on SAK, full sized MT AND on the light :whistle: That's not bad going, John. :rofl:
If you're going to fail, you might as well fail in style :D :D :D
Post by: Caranthanus on October 07, 2014, 12:18:13 AM
May the Force be with us :facepalm:
Post by: shark_za on October 07, 2014, 12:27:35 AM
This exercise is helping me narrow it down to a "Waiter Plus with scissors" aka the Compact.
I'll still use my Evo 10 (On Wednesday I see) but can see the Compact taking center stage.
Post by: getahl on October 07, 2014, 12:56:39 AM
Post by: zoidberg on October 07, 2014, 01:07:06 AM
Sent from the land of the long white cloud.
Post by: colt 1911 on October 07, 2014, 01:22:49 AM
Went to use the minimalist this morning but its gone. I really really really hope its sitting on the bench at home where I was making lunches.
Sent from the land of the long white cloud.
I hope it's there pal !
Sak's rule !
Post by: Toolslinger on October 07, 2014, 01:40:37 AM
Post by: gustophersmob on October 07, 2014, 02:25:22 AM
So far this challenge has me realizing that I don't really need to carry anything other than a SAK.
Same here. I'm also realizing I can get away with only a few tools on that SAK. Which makes me wonder why I've been carrying so much bulk/weight (comparatively speaking) for so long. Also, why I've spent so much time and money on MT's and SAKs... :facepalm:
Before this challenge (ie the day before the first thread started) I had been debating carrying only my SwissChamp for a month or more and documenting each tool that I used. The goal being to mod it down to the absolute minimum toolset (eliminating unused ones) possible. I probably would have ended up with a Climber. :facepalm:
YES, the minimalism bug is biting! >:D
Post by: Higgins617 on October 07, 2014, 02:27:33 AM
So far this challenge has me realizing that I don't really need to carry anything other than a SAK.
Same here. I'm also realizing I can get away with only a few tools on that SAK. Which makes me wonder why I've been carrying so much bulk/weight (comparatively speaking) for so long. Also, why I've spent so much time and money on MT's and SAKs... :facepalm:
Before this challenge (ie the day before the first thread started) I had been debating carrying only my SwissChamp for a month or more and documenting each tool that I used. The goal being to mod it down to the absolute minimum toolset (eliminating unused ones) possible. I probably would have ended up with a Climber. :facepalm:
YES, the minimalism bug is biting! >:D
Blasphemy! Speak like that will be the end of this forum! This challenge is simply a test of our might to prove we are worthy to the multigods!!!!!
Post by: gustophersmob on October 07, 2014, 02:28:53 AM
We're only six days in guys ... plenty of time for things to change ;)
Temptation is your friend ... no, wait ... your enemy ... no, wait ... your labrador .....
What was I on about? :think:
Oh yeah, I reckon there'll be a few more joining me by the end of the month >:D
Quiet you! :twak: I've almost got them all converted. ;)
Step two, EDC only a one-piece tool >:D
Post by: Monrogue on October 07, 2014, 03:54:40 AM
In all honesty though, I could likely get by just fine with my Compact. My Rogueneer is looking more like overkill (not that such a fact has stopped me before), with the only two things I miss being a small secondary blade and the metal file. As much as I like to have the mag/phillips layer, I rarely use it, and the main thing I want is the magnifier. I wish there was something besides the phillips that could go there, especially since I have the can opener for phillips driver needs. I'm beginning to think that I would like the Compact with the metal file (I think that's the Trailguide). Still, the Rogueneer is the max of what I want in a SAK, and still my fave. I think the big thing helping the Compact is just how well it rides in the pocket, and how I barely notice it there in comparison with the 5 layer Rogueneer beast.
Post by: nate j on October 07, 2014, 04:20:55 AM
Before this challenge (ie the day before the first thread started) I had been debating carrying only my SwissChamp for a month or more and documenting each tool that I used. The goal being to mod it down to the absolute minimum toolset (eliminating unused ones) possible. I probably would have ended up with a Climber. :facepalm:
I pretty much did just that myself, though it has been years ago now. I bought a Swisschamp and decided to start carrying it, with the intent that I would ultimately either (1) get on with the Swisschamp well enough to make it my long-term EDC, or (2) figure out which tools I actually used and get a slimmer EDC with only those tools. It only took me a week or two to decide that the Swisschamp was more than I wanted to carry around; and that, in addition to the basic Spartan tool set (the fact that I carried a Spartan exclusively for years might have biased this outcome), the scissors were the one additional tool I really used regularly. So, while I didn't mod the Swisschamp down, I did end up with the Climber as probably the closest to perfect EDC for me.
I think the Climber can be replaced by the Compact if you don't use the Awl and think that the Phillips on the can opener is not so great. I'm thinking that is the SAK for EDC.The Compact has many fans, and deservedly so. Though I tried the Compact, I ultimately returned to the Climber, for the following reasons:
This exercise is helping me narrow it down to a "Waiter Plus with scissors" aka the Compact.
I'll still use my Evo 10 (On Wednesday I see) but can see the Compact taking center stage.
- the opener layer beats out the combo tool not only due to the can opener Phillips driver, but also because the beefier bottle opener makes a better light pry tool (and better flat screwdriver for stubborn screws) than the combo tool
- I do use the awl
- it is nice to have at least two knife blades; one for "dirty" work and one for "clean" work
Post by: SAK Guy on October 07, 2014, 05:14:27 AM
I used to EDC a 93mm with along with another knife so just carrying the Pioneer was a change, but not an unfamiliar one.
I do miss my 3+ layer knives though.....
Post by: arizonaranchman on October 07, 2014, 05:37:23 AM
Quiet day at home again... The Pioneer opened a bag of bird feed. :tu:
Post by: SAK Guy on October 07, 2014, 05:45:25 AM
Post by: zoidberg on October 07, 2014, 07:35:38 AM
Went to use the minimalist this morning but its gone. I really really really hope its sitting on the bench at home where I was making lunches.
Sent from the land of the long white cloud.
I hope it's there pal !
Sak's rule !
And it is! :woohoo: :drink:
Post by: SAK Guy on October 07, 2014, 07:41:52 AM
Went to use the minimalist this morning but its gone. I really really really hope its sitting on the bench at home where I was making lunches.
Sent from the land of the long white cloud.
I hope it's there pal !
Sak's rule !
And it is! :woohoo: :drink:
:cheers:
Post by: mrynnr on October 07, 2014, 07:48:39 AM
Leisurely day helping me open packages and such.
Post by: zoidberg on October 07, 2014, 08:02:56 AM
(http://i1341.photobucket.com/albums/o757/mrynnr/MT/E504BDD0-2F1E-42F3-93D9-3F81F610F1B3_zpshpkbi9pq.jpg) (http://s1341.photobucket.com/user/mrynnr/media/MT/E504BDD0-2F1E-42F3-93D9-3F81F610F1B3_zpshpkbi9pq.jpg.html)Nice, flashlight envy. :drool:
Leisurely day helping me open packages and such.
Post by: Gareth on October 07, 2014, 11:15:26 AM
Don't think my Golfer has had to do anything today.:think:
The E01 on the other had we very useful for looking under sofas.
Scratch that, I decided to have a beer last night. :drink:
Post by: hiraethus on October 07, 2014, 11:36:13 AM
(https://farm3.staticflickr.com/2947/15280474580_57b8b16340.jpg) (https://flic.kr/p/phhqJh)
I've now got a knife for Wenger Wednesdays too - my 1978 SI. Updated table below:
| NAME | ¦ | PRIMARY KNIFE | ¦ | WENGER WEDNESDAY | ¦ | LIGHT | |
| gustophersmob | ¦ | Wenger Premier | ¦ | ¦ | Fenix E01 | ||
| Higgins617 | ¦ | Esquire | ¦ | ¦ | Coast G10 | ||
| SAK Guy | ¦ | OC Red Pioneer | ¦ | Wenger SI | ¦ | Gerber Infinity Ultra | |
| eddie1115 | ¦ | Tourist | ¦ | ¦ | Princeton Tec Pulsar | ||
| ducttapetech | ¦ | Compact Plus | ¦ | ¦ | Mag-Lite Solitaire | ||
| Toolslinger | ¦ | Compact Plus | ¦ | ¦ | Led Lenser P2 | ||
| Hyatt181 | ¦ | Compact | ¦ | ¦ | |||
| colt 1911 | ¦ | Tinker Small | ¦ | ¦ | Gerber Tempo | ||
| powernoodle | ¦ | Executive | ¦ | ¦ | Fenix E05 | ||
| arizonaranchman | ¦ | Silver Alox Pioneer | ¦ | ¦ | |||
| Monrogue | ¦ | Compact | ¦ | ¦ | Photon Freedom Micro | ||
| haackeg | ¦ | Tinker | ¦ | ¦ | |||
| SAKchief | ¦ | Manager | ¦ | ¦ | |||
| shark_za | ¦ | Vic Waiter | ¦ | ¦ | Fenix E01 | ||
| ¦ | ¦ | ¦ | |||||
| Sorel | ¦ | Alox Bantam | ¦ | ¦ | |||
| Grass | ¦ | Sportsman | ¦ | ¦ | |||
| red_rider_1979 | ¦ | Rambler Stayglow | ¦ | ¦ | |||
| hiraethus | ¦ | Black Pioneer | ¦ | 1978 Wenger SI | ¦ | Fenix E05 | |
| Etherealicer | ¦ | Midnight Manager | ¦ | Crusader Mini Spotlight | ¦ | Scale Lights | |
| coSAK | ¦ | Compact | ¦ | ¦ | |||
| zoidberg | ¦ | Pioneer Apprentice | ¦ | Wenger SI | ¦ | Fenix E01 | |
| kirk13 | ¦ | Vic 84mm Apprentice | ¦ | Wenger Junior 10 | ¦ | Fauxston | |
| gene stoner | ¦ | Tinkerer | ¦ | ¦ | |||
| pfrsantos | ¦ | Sportsman | ¦ | ¦ | Led Lenser K1 | ||
| derekmac | ¦ | OC Red Pioneer | ¦ | ¦ | |||
| magentus | ¦ | Wenger SI | ¦ | ¦ | |||
| cbl51 | ¦ | Classic | ¦ | ¦ | |||
| Caranthanus | ¦ | Wenger S10 | ¦ | ¦ | |||
| fx17 | ¦ | Small Tinker | ¦ | ¦ | |||
| Gareth | ¦ | Golfer | ¦ | ¦ | Fenix E01 | ||
| K13ss4r | ¦ | Silver Alox Electrician | ¦ | ¦ | |||
| enki_ck | ¦ | Waiter | ¦ | ¦ | Peak Matterhorn | ||
| ¦ | ¦ | ¦ | |||||
| shamus | ¦ | Classic SD | ¦ | ¦ | Photon Freedom | ||
| getahl | ¦ | Classic SD | ¦ | ¦ | |||
| Fast Bill | ¦ | Spartan | ¦ | ¦ | |||
| mrynnr | ¦ | Wenger SI | ¦ | ¦ | |||
| Syph007 | ¦ | 84mm Apprentice | ¦ | ¦ |
Post by: hiraethus on October 07, 2014, 12:11:51 PM
(https://farm6.staticflickr.com/5599/15467398585_648c2eae35.jpg) (https://flic.kr/p/pyNsHX)
(https://farm4.staticflickr.com/3936/15444312096_3af6ba5585.jpg) (https://flic.kr/p/pwL8V3)
23% of the primary knives are alox too - mostly Vic but a couple of Wenger SIs.
And as you can see, 50ft trad has a category all of his own in both cases. :D
Post by: kirk13 on October 07, 2014, 12:23:51 PM
Quick breakdown of the brand and size of primary knife used:
(https://farm6.staticflickr.com/5599/15467398585_648c2eae35.jpg) (https://flic.kr/p/pyNsHX)
(https://farm4.staticflickr.com/3936/15444312096_3af6ba5585.jpg) (https://flic.kr/p/pwL8V3)
23% of the primary knives are alox too - mostly Vic but a couple of Wenger SIs.
And as you can see, 50ft trad has a category all of his own in both cases. :D
I've often said that Al is in a category of his own :D
Post by: zoidberg on October 07, 2014, 12:27:06 PM
Post by: kirk13 on October 07, 2014, 06:45:35 PM
For me,it's carrying the same SAK everyday,without having a choice.
It's been a long,long time since I've lacked choice!
Post by: pfrsantos on October 07, 2014, 06:47:11 PM
:D :D
Post by: colt 1911 on October 07, 2014, 06:50:46 PM
What are you folks finding the most difficult part of the challenge?
For me,it's carrying the same SAK everyday,without having a choice.
It's been a long,long time since I've lacked choice!
Yeah I like to switch it up also !
Sak's rule !
Post by: SAK Guy on October 07, 2014, 06:54:35 PM
What are you folks finding the most difficult part of the challenge?
For me,it's carrying the same SAK everyday,without having a choice.
It's been a long,long time since I've lacked choice!
Well spoken Kirk! Also for me, not being able to dip into my bag of SAKs and pull out a specialized one for a task. :climber:
Post by: ducttapetech on October 07, 2014, 07:05:52 PM
What are you folks finding the most difficult part of the challenge?Its not the choice part. I carry a Surge most of the time. Well, was.
For me,it's carrying the same SAK everyday,without having a choice.
It's been a long,long time since I've lacked choice!
The difficult part is the major lack of tools. Pliers, drivers, saw and file. Miss the OH blades like crazy. Mostly because they are faster to open. Did have one job today when I was up on a latter when a OH blade would have been a God send. The utility knife did not and the reach I needed in a tight spot. Had to climb down the latter so I could safely open the blade. I was using one hand to brace myself while working. Walking back and forth to the shop for little fixes that a larger SAK or MT would have taken care of is getting a tad old. But, my Compact is proving to be useful. Just not as useful as my Surge.
Nate
Post by: pfrsantos on October 07, 2014, 07:14:56 PM
:tu: :tu:
After I opened it, I read the label and threw the damned thing in the trash...
:facepalm:
Post by: Caranthanus on October 07, 2014, 08:58:11 PM
:D
Post by: kirk13 on October 07, 2014, 08:59:18 PM
:ahhh :ahhh :ahhh
Report at the end of day seven:
Used the Phillips to mount a red dot sight on a nerf gun( :facepalm: )
Post by: ivan_partizan on October 07, 2014, 09:04:55 PM
Post by: Toolslinger on October 07, 2014, 09:05:28 PM
Post by: getahl on October 07, 2014, 09:06:22 PM
Post by: getahl on October 07, 2014, 09:08:14 PM
Post by: Etherealicer on October 07, 2014, 09:48:45 PM
After a slow day with only easy task (opening a package, cutting an apple) the Midnight Manager got his first true test.
We were fencing in the ruins of an old fortress (Wartburg, Olten, Switzerland). Due to bad lighting we changed from the sword to staff (the light wood and slower speed make it easier to see). So I decided to test how much distraction the tiny light of the MM can do. Sure enough, it was enough to land two good blows. In all fairness I have to say that I warned my friend and he waited until I had the MM ready.
Still, its interesting to know that in poor lighting the MM light is bright enough to daze and distract.
Well, as it is custom, a sword that draws blood needs naming. Anyway, my MM shall be known as Euryphaessa after the Greek Titaness and mother of Helios.
Post by: zoidberg on October 07, 2014, 10:24:03 PM
Only three to go!
:ahhh :ahhh :ahhh
Report at the end of day seven:
Used the Phillips to mount a red dot sight on a nerf gun( :facepalm: )
Nice! :tu:
Post by: kirk13 on October 07, 2014, 10:49:52 PM
Only three to go!
:ahhh :ahhh :ahhh
Report at the end of day seven:
Used the Phillips to mount a red dot sight on a nerf gun( :facepalm: )
Nice! :tu:
Kinda sad I can get a 'proper' red dot delivered to my door for half the price of a nerf one!
Post by: Toolslinger on October 07, 2014, 10:51:20 PM
Only three to go!
:ahhh :ahhh :ahhh
Report at the end of day seven:
Used the Phillips to mount a red dot sight on a nerf gun( :facepalm: )
Nice! :tu:
Kinda sad I can get a 'proper' red dot delivered to my door for half the price of a nerf one!
That is very sad indeed.
Post by: mrynnr on October 07, 2014, 10:54:18 PM
Helped me cut some tape for a package at the post office today :)
Post by: getahl on October 08, 2014, 04:31:58 AM
Post by: SAK Guy on October 08, 2014, 04:47:48 AM
Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
Congrats!!!!!!
Post by: SAK Guy on October 08, 2014, 04:48:49 AM
(http://i1341.photobucket.com/albums/o757/mrynnr/MT/00814CDA-A818-4AB5-AF02-337F84753577_zpsrufcufvt.jpg) (http://s1341.photobucket.com/user/mrynnr/media/MT/00814CDA-A818-4AB5-AF02-337F84753577_zpsrufcufvt.jpg.html)
Helped me cut some tape for a package at the post office today :)
Great pic! :2tu:
Post by: JAfromMn on October 08, 2014, 05:08:28 AM
Post by: coSAK on October 08, 2014, 09:39:43 AM
Maybe with my birthyear tang stamp.
OMG :facepalm:
Post by: Gareth on October 08, 2014, 11:07:45 AM
What are you folks finding the most difficult part of the challenge?
For me,it's carrying the same SAK everyday,without having a choice.
It's been a long,long time since I've lacked choice!
That's it in a nutshell. Same goes for the torch. Much as I like the E01 there have been a couple of times already where something brighter with a better throw would have been better.
Post by: magentus on October 08, 2014, 11:08:36 AM
Join us join us join us...........
Post by: ducttapetech on October 08, 2014, 11:22:40 AM
Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!Congrats!!!
Had my first torch fail last night. The dog was going barking up a storm last night. Which is something he rarely does. Tried to see what was going on with the Solitaire. No go. I needed something that was really bright and a lot of reach. So I used my Mini mag pro. Just turned out to be a skunk. Glad I was able to see that and get the dog out of there. That would have been a nasty mess.
Nate
Post by: firiki on October 08, 2014, 11:26:09 AM
Damn! You scoundrels will actually bring me to want a Soldier.
Maybe with my birthyear tang stamp.
OMG :facepalm:
I knew the alox Pioneer would probably be my EDC for the rest of my days right when I first held it in my hands.
:poke: :poke: :D
Post by: coSAK on October 08, 2014, 12:30:28 PM
You should definitely get one. A Soldier (Wenger SI preferably) is a SAK everyone should own.
Join us join us join us...........
I'm afraid I have to.
Ok… It's on THE LIST now. :salute:
Post by: Gareth on October 08, 2014, 12:40:09 PM
Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
:o
:woohoo:
Try and get some sleep tonight, it might be the last chance you get for a while. :D
Post by: Toolslinger on October 08, 2014, 01:19:46 PM
^what he said.Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
:o
:woohoo:
Try and get some sleep tonight, it might be the last chance you get for a while. :D
Also, congrats on the new addition to the family :tu:.
Post by: Toolslinger on October 08, 2014, 01:20:29 PM
Post by: SAK Guy on October 08, 2014, 01:21:58 PM
Post by: magentus on October 08, 2014, 01:36:33 PM
Carrying the SI today for WENGER Wed! Pix later.
Me too - for Wenger Wednesday and the 30 day challenge.
Post by: kirk13 on October 08, 2014, 01:38:44 PM
Post by: Singh on October 08, 2014, 02:19:48 PM
(http://i1199.photobucket.com/albums/aa466/sx975/751f7513-0d07-4353-8172-6701e92757e5_zps5f5e239f.jpg)
Post by: SAK Guy on October 08, 2014, 02:42:07 PM
The horror, the horror. :facepalm:
Post by: hiraethus on October 08, 2014, 03:17:21 PM
(https://farm3.staticflickr.com/2948/15454823356_0ccb15ceb2_z.jpg) (https://flic.kr/p/pxG1xE)
Post by: getahl on October 08, 2014, 03:33:43 PM
We were supposed to be at the hospital 45 minutes ago to check in for the induction, but received a call at 4:30 am to explain that the rooms were all full. So, we're officially on call.
Post by: Monrogue on October 08, 2014, 03:41:31 PM
Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
Congrats on the baby girl :cheers:
Damn! You scoundrels will actually bring me to want a Soldier.
Maybe with my birthyear tang stamp.
OMG :facepalm:
Yes, I too would like one with my birth year ('78).
Post by: Monrogue on October 08, 2014, 03:43:59 PM
Post by: Toolslinger on October 08, 2014, 03:58:39 PM
Yesterday all the Compact did was trim a few stray beard whiskers and open a box. This is really my typical day more or less. Just proves I really don't need to carry what I do for the most part, if I were concerned with being minimalistic that is....which I'm not ;)^ Same here.
Post by: SAK Guy on October 08, 2014, 04:08:53 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/WengerWedSI_zpsdfa56887.jpg)
Oh and Wenger Wed is causing quite a stir this morning!
(http://i833.photobucket.com/albums/zz256/SAKGuy/Quiteastir_zps3f5c4fe3.jpg)
Post by: derekmac on October 08, 2014, 04:10:47 PM
Post by: Etherealicer on October 08, 2014, 04:18:23 PM
Forgot my Crusader at home, so I went bare :facepalm:
Couldn't open a clamshell package (Had no scissors, no knife and keys don't work well for that :ahhh) and had to use a table-knife for the lunch-break :cry:.
Post by: Aloha on October 08, 2014, 05:19:06 PM
Thanks for the well wishes. This will be our second; our 3-1/2 year old boy is staying with his grandparents for a few days.
We were supposed to be at the hospital 45 minutes ago to check in for the induction, but received a call at 4:30 am to explain that the rooms were all full. So, we're officially on call.
Congrats on the new addition for you and your family.
Post by: pfrsantos on October 08, 2014, 05:22:21 PM
Day 8: Ultra Minimalistic
Forgot my Crusader at home, so I went bare :facepalm:
Couldn't open a clamshell package (Had no scissors, no knife and keys don't work well for that :ahhh) and had to use a table-knife for the lunch-break :cry:.
With a SwissChamp inside? That would be ironic...
:D :D
Post by: Hyatt181 on October 08, 2014, 05:26:28 PM
Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
Congratulations I just had my second son yesterday.
The doctor wouldn't let me use my compact for anything.
(http://tapatalk.imageshack.com/v2/14/10/08/68b9a2132b88799b6628d0f00bc6aff7.jpg)
Sent from my iPhone using Tapatalk
Post by: Etherealicer on October 08, 2014, 05:28:45 PM
No, it was a book about how to get over your anxieties, when you forget your SAK at home.Day 8: Ultra Minimalistic
Forgot my Crusader at home, so I went bare :facepalm:
Couldn't open a clamshell package (Had no scissors, no knife and keys don't work well for that :ahhh) and had to use a table-knife for the lunch-break :cry:.
With a SwissChamp inside? That would be ironic...
:D :D
Post by: Etherealicer on October 08, 2014, 05:29:34 PM
Congratz to both of you :cheers: :cheers: :cheers:Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
Congratulations I just had my second son yesterday.
The doctor wouldn't let me use my compact for anything.
(http://tapatalk.imageshack.com/v2/14/10/08/68b9a2132b88799b6628d0f00bc6aff7.jpg)
Sent from my iPhone using Tapatalk
Post by: pfrsantos on October 08, 2014, 05:39:28 PM
No, it was a book about how to get over your anxieties, when you forget your SAK at home.Day 8: Ultra Minimalistic
Forgot my Crusader at home, so I went bare :facepalm:
Couldn't open a clamshell package (Had no scissors, no knife and keys don't work well for that :ahhh) and had to use a table-knife for the lunch-break :cry:.
With a SwissChamp inside? That would be ironic...
:D :D
That's ironic enough...
:D :D
Post by: Gareth on October 08, 2014, 06:06:29 PM
Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
Congratulations I just had my second son yesterday.
The doctor wouldn't let me use my compact for anything.
(http://tapatalk.imageshack.com/v2/14/10/08/68b9a2132b88799b6628d0f00bc6aff7.jpg)
Sent from my iPhone using Tapatalk
Fantastic news! Many congratulations mate. :cheers:
Post by: colt 1911 on October 08, 2014, 06:08:10 PM
Sak's rule !
Post by: ducttapetech on October 08, 2014, 06:20:32 PM
Day whatever , as the challenge starts to drag out, it has made me really appreciate a good MT " Spirit " . The minimalist just doesn't cover my work needs and frankly cost me time and money. I'm still in for the 30 days but I'll never do this again. :)I hear ya! Running back and forth is not getting it. Luckly I have not come across anything where I would have to a MT or Larger SAK. Plus all of the hayfields are up and the bushhogging is done. That's a big plus. But I am gonna try to stick it out. Did fail the torch challenge. I just had to have a bigger light this morning.
Sak's rule !
Nate
Post by: Humppa on October 08, 2014, 06:23:05 PM
:cheers: :drink:
Post by: Monrogue on October 08, 2014, 06:34:08 PM
Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
Congratulations I just had my second son yesterday.
The doctor wouldn't let me use my compact for anything.
(http://tapatalk.imageshack.com/v2/14/10/08/68b9a2132b88799b6628d0f00bc6aff7.jpg)
Sent from my iPhone using Tapatalk
Congrats on the baby boy :cheers: They should have let you use the Compact to cut the cord at least ;)
Post by: Hyatt181 on October 08, 2014, 06:50:29 PM
That's what I thought. Doc said something about not sharp enough blah blah blahDay whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
Congratulations I just had my second son yesterday.
The doctor wouldn't let me use my compact for anything.
(http://tapatalk.imageshack.com/v2/14/10/08/68b9a2132b88799b6628d0f00bc6aff7.jpg)
Sent from my iPhone using Tapatalk
Congrats on the baby boy :cheers: They should have let you use the Compact to cut the cord at least ;)
Sent from my iPhone using Tapatalk
Post by: SAK Guy on October 08, 2014, 06:59:50 PM
Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
Congratulations I just had my second son yesterday.
The doctor wouldn't let me use my compact for anything.
(http://tapatalk.imageshack.com/v2/14/10/08/68b9a2132b88799b6628d0f00bc6aff7.jpg)
Sent from my iPhone using Tapatalk
Congrats Hyatt!!
Post by: colt 1911 on October 08, 2014, 07:14:45 PM
Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
Congratulations I just had my second son yesterday.
The doctor wouldn't let me use my compact for anything.
(http://tapatalk.imageshack.com/v2/14/10/08/68b9a2132b88799b6628d0f00bc6aff7.jpg)
Sent from my iPhone using Tapatalk
Congrats Hyatt!!
+ 1 on that !
Sak's rule !
Post by: eddie1115 on October 08, 2014, 09:17:36 PM
(http://tapatalk.imageshack.com/v2/14/10/08/43163c4a1cacff97c6d433ca218e0428.jpg)
Almost identical tool-wise to my Tourist, except for the locking combo blade, so it should be a good substitution.
Post by: getahl on October 08, 2014, 09:55:49 PM
Post by: getahl on October 09, 2014, 12:21:51 AM
Post by: derekmac on October 09, 2014, 12:24:09 AM
Baby's here! 7 lbs 3 oz, 20.5 pounds.:woohoo: Congrats!!!!!!!!!!!!!!!!!!!!!!!!!
(http://i231.photobucket.com/albums/ee131/TBtags_myspace/baby-congrats.jpg)
Post by: ducttapetech on October 09, 2014, 12:26:58 AM
Nate
Post by: eddie1115 on October 09, 2014, 12:28:18 AM
Baby's here! 7 lbs 3 oz, 20.5 pounds.Congrats! :)
Post by: SAK Guy on October 09, 2014, 12:32:57 AM
Baby's here! 7 lbs 3 oz, 20.5 pounds.
Wonderful news!! :tu:
Post by: Caranthanus on October 09, 2014, 12:33:37 AM
Congrats both ... :cheers:Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
Congratulations I just had my second son yesterday.
The doctor wouldn't let me use my compact for anything.
Wtf ::) ... I mean what the doctors know about use a Compact? :whistle:
You should use The Compact for hair styling to future SAK addicted; I've seen some hair split ends there ...
:facepalm:
Post by: Caranthanus on October 09, 2014, 12:36:30 AM
(http://s8.postimg.org/dh6zq7cx1/image.jpg)
Post by: SAK Guy on October 09, 2014, 01:04:56 AM
Meanwhile the struggle ... ops, the challenge continues :D:rofl:
(http://s8.postimg.org/dh6zq7cx1/image.jpg)
Post by: Monrogue on October 09, 2014, 02:38:07 AM
Baby's here! 7 lbs 3 oz, 20.5 pounds.
Congrats :cheers:
Post by: gustophersmob on October 09, 2014, 03:26:51 AM
Damn! You scoundrels will actually bring me to want a Soldier.
Maybe with my birthyear tang stamp.
OMG :facepalm:
I knew the alox Pioneer would probably be my EDC for the rest of my days right when I first held it in my hands.
:poke: :poke: :D
Me too. Its really hard not to carry it for this long. I've said before, Vic basically perfected the pocketknife with the pioneer.
Post by: gustophersmob on October 09, 2014, 03:28:03 AM
Day whatever we're on, part two. Used my Classic as a staple remover, cuz I couldn't find the one at work. Tomorrow, I'm not expecting no major SAK chores outside of opening snacks at the hospital cuz I'm HAVING A DAUGHTER TOMORROW!
Congratulations I just had my second son yesterday.
The doctor wouldn't let me use my compact for anything.
(http://tapatalk.imageshack.com/v2/14/10/08/68b9a2132b88799b6628d0f00bc6aff7.jpg)
Sent from my iPhone using Tapatalk
Congrats!!!
From experience I can say there is nothing minimalistic when it comes to babies.... :P
Post by: gustophersmob on October 09, 2014, 03:29:49 AM
Baby's here! 7 lbs 3 oz, 20.5 pounds.
Congrats to you as well! :cheers:
Post by: gustophersmob on October 09, 2014, 03:30:54 AM
Baby's here! 7 lbs 3 oz, 20.5 pounds.:woohoo: Congrats!!!!!!!!!!!!!!!!!!!!!!!!!
(http://i231.photobucket.com/albums/ee131/TBtags_myspace/baby-congrats.jpg)
I know this is weird, but the 1st thing I thought is, "why is there a butterfly coming out of that baby's bum?" :o
Post by: gustophersmob on October 09, 2014, 03:34:35 AM
Post by: Hyatt181 on October 09, 2014, 03:57:58 AM
Baby's here! 7 lbs 3 oz, 20.5 pounds.Man a 20 pound baby.!
I know it's been a long day!
Congratulations
Sent from my iPhone using Tapatalk
Post by: getahl on October 09, 2014, 05:02:28 AM
Bah meant 20.5 inches. Thank you for the well wishes,.one and all.Baby's here! 7 lbs 3 oz, 20.5 pounds.Man a 20 pound baby.!
I know it's been a long day!
Congratulations
Sent from my iPhone using Tapatalk
My Classic even got a bit of a workout. No cord though. My daughter gave my son a plane from Fire and Rescue that was attached to a baseplate by two Philips screws. Classic to the rescue. Also trimmed off a tag from a baby hat, and opened a bag of jelly beans.
Post by: nate j on October 09, 2014, 06:42:09 AM
The minimalist just doesn't cover my work needs and frankly cost me time and money.
I'm sure that wasn't the intent of the challenge. You have given the minimalist EDC a fair shot, but found it wanting. I for one believe you could withdraw with honor at this point.
Post by: Gareth on October 09, 2014, 09:21:54 AM
Baby's here! 7 lbs 3 oz, 20.5 inches.
Woo Hoo!
(http://i.imgur.com/B5aTato.gif)
Congratulations mate. :cheers:
Post by: pfrsantos on October 09, 2014, 01:22:54 PM
Day whatever , as the challenge starts to drag out, it has made me really appreciate a good MT " Spirit " . The minimalist just doesn't cover my work needs and frankly cost me time and money. I'm still in for the 30 days but I'll never do this again. :)
Sak's rule !
I think this is meant to cover situations where you'd use another regular EDC item. When dealing with work problems, you have dedicated tools that you use, even when you EDC a Wave, SwissChamp or other. If you need a hammer or a pipe wrench, you have that at work and use it. You'd not use your regular EDC.
Am I right about this?...
I use other knifes at home (bread knife, butter knife...). I use my Sportsman when I would use any EDC SAK/knife/MT.
Post by: ducttapetech on October 09, 2014, 02:05:31 PM
You kinda lost me. I think I get what you are saying. People like Joel, Colt and I don't always have instant access to regular tools unless we want to carry a big heavy tool box. We have to go back and forth to a shop to fix things that otherwise out Larger SAK or MT would have fixed easy. Time saved. And time equals money. Now if I know I got a certain job that needs done, I will grab the tool bag, load up what tools I need and go get it done. Also, our larger SAKs and Multis can save our bacon. A few months ago, I come across a huge water leak. Water everywhere. I would have had to run back to the shop, get a wrench, run back and shut the water off. All I had to do was use my Surge and shut the water off. Now the Surge did not fix it, but I was able to shut the water off right then and there and keep anymore damage from happening. On the farm alone, I have saved a few animals with my Surge once and with my Supertimer because they where able to cut or score the wire the animals were tangled up in. I would have hated to have to go all the way back to the shop just to get a pair of wire cutters and go back to cut out a dead cow.Day whatever , as the challenge starts to drag out, it has made me really appreciate a good MT " Spirit " . The minimalist just doesn't cover my work needs and frankly cost me time and money. I'm still in for the 30 days but I'll never do this again. :)
Sak's rule !
I think this is meant to cover situations where you'd use another regular EDC item. When dealing with work problems, you have dedicated tools that you use, even when you EDC a Wave, SwissChamp or other. If you need a hammer or a pipe wrench, you have that at work and use it. You'd not use your regular EDC.
Am I right about this?...
I use other knifes at home (bread knife, butter knife...). I use my Sportsman when I would use any EDC SAK/knife/MT.
That would have been a major loss of money.
I am with Colt on this one, I will try to stick it out, but I won't do it again. I do have to admit, it has been kinda fun. Sometimes I get that "OMG WHAT THE SMURF WAS I THINKING" moments.
Nate
Post by: colt 1911 on October 09, 2014, 02:15:35 PM
Day whatever , as the challenge starts to drag out, it has made me really appreciate a good MT " Spirit " . The minimalist just doesn't cover my work needs and frankly cost me time and money. I'm still in for the 30 days but I'll never do this again. :)
Sak's rule !
I think this is meant to cover situations where you'd use another regular EDC item. When dealing with work problems, you have dedicated tools that you use, even when you EDC a Wave, SwissChamp or other. If you need a hammer or a pipe wrench, you have that at work and use it. You'd not use your regular EDC.
Am I right about this?...
I use other knifes at home (bread knife, butter knife...). I use my Sportsman when I would use any EDC SAK/knife/MT.
Sorry but you are totally wrong, I use a MT all the time everyday, It is all kinds of different situations, door handles, screws, nails, ceiling grid, drywall, etc etc. etc etc. I have many different mini jobs during the day and a MT saves me many trips back and forth to the shop, I guess my most dedicated work tool is a Victorinox Spirit.
So the challenge is going minimal and see how it works out. In my case not well.
Sak's rule !
Post by: colt 1911 on October 09, 2014, 02:17:56 PM
You kinda lost me. I think I get what you are saying. People like Joel, Colt and I don't always have instant access to regular tools unless we want to carry a big heavy tool box. We have to go back and forth to a shop to fix things that otherwise out Larger SAK or MT would have fixed easy. Time saved. And time equals money. Now if I know I got a certain job that needs done, I will grab the tool bag, load up what tools I need and go get it done. Also, our larger SAKs and Multis can save our bacon. A few months ago, I come across a huge water leak. Water everywhere. I would have had to run back to the shop, get a wrench, run back and shut the water off. All I had to do was use my Surge and shut the water off. Now the Surge did not fix it, but I was able to shut the water off right then and there and keep anymore damage from happening. On the farm alone, I have saved a few animals with my Surge once and with my Supertimer because they where able to cut or score the wire the animals were tangled up in. I would have hated to have to go all the way back to the shop just to get a pair of wire cutters and go back to cut out a dead cow.Day whatever , as the challenge starts to drag out, it has made me really appreciate a good MT " Spirit " . The minimalist just doesn't cover my work needs and frankly cost me time and money. I'm still in for the 30 days but I'll never do this again. :)
Sak's rule !
I think this is meant to cover situations where you'd use another regular EDC item. When dealing with work problems, you have dedicated tools that you use, even when you EDC a Wave, SwissChamp or other. If you need a hammer or a pipe wrench, you have that at work and use it. You'd not use your regular EDC.
Am I right about this?...
I use other knifes at home (bread knife, butter knife...). I use my Sportsman when I would use any EDC SAK/knife/MT.
That would have been a major loss of money.
I am with Colt on this one, I will try to stick it out, but I won't do it again. I do have to admit, it has been kinda fun. Sometimes I get that "OMG WHAT THE SMURF WAS I THINKING" moments.
Nate
Well said !
Sak's rule !
Post by: SAK Guy on October 09, 2014, 02:37:51 PM
You kinda lost me. I think I get what you are saying. People like Joel, Colt and I don't always have instant access to regular tools unless we want to carry a big heavy tool box. We have to go back and forth to a shop to fix things that otherwise out Larger SAK or MT would have fixed easy. Time saved. And time equals money. Now if I know I got a certain job that needs done, I will grab the tool bag, load up what tools I need and go get it done. Also, our larger SAKs and Multis can save our bacon. A few months ago, I come across a huge water leak. Water everywhere. I would have had to run back to the shop, get a wrench, run back and shut the water off. All I had to do was use my Surge and shut the water off. Now the Surge did not fix it, but I was able to shut the water off right then and there and keep anymore damage from happening. On the farm alone, I have saved a few animals with my Surge once and with my Supertimer because they where able to cut or score the wire the animals were tangled up in. I would have hated to have to go all the way back to the shop just to get a pair of wire cutters and go back to cut out a dead cow.Day whatever , as the challenge starts to drag out, it has made me really appreciate a good MT " Spirit " . The minimalist just doesn't cover my work needs and frankly cost me time and money. I'm still in for the 30 days but I'll never do this again. :)
Sak's rule !
I think this is meant to cover situations where you'd use another regular EDC item. When dealing with work problems, you have dedicated tools that you use, even when you EDC a Wave, SwissChamp or other. If you need a hammer or a pipe wrench, you have that at work and use it. You'd not use your regular EDC.
Am I right about this?...
I use other knifes at home (bread knife, butter knife...). I use my Sportsman when I would use any EDC SAK/knife/MT.
That would have been a major loss of money.
I am with Colt on this one, I will try to stick it out, but I won't do it again. I do have to admit, it has been kinda fun. Sometimes I get that "OMG WHAT THE SMURF WAS I THINKING" moments.
Nate
Well said !
Sak's rule !
Ahhhh, you hard working guys with happy well adjusted lives..... :pok: ;)
My "no life" status is allowing me to breeze through the challenge. :facepalm:
Post by: colt 1911 on October 09, 2014, 03:28:37 PM
The minimalist just doesn't cover my work needs and frankly cost me time and money.
I'm sure that wasn't the intent of the challenge. You have given the minimalist EDC a fair shot, but found it wanting. I for one believe you could withdraw with honor at this point.
It's all good, I'll stay in. Can't get rid of me that easy :)
Sak's rule !
Post by: colt 1911 on October 09, 2014, 03:33:50 PM
You kinda lost me. I think I get what you are saying. People like Joel, Colt and I don't always have instant access to regular tools unless we want to carry a big heavy tool box. We have to go back and forth to a shop to fix things that otherwise out Larger SAK or MT would have fixed easy. Time saved. And time equals money. Now if I know I got a certain job that needs done, I will grab the tool bag, load up what tools I need and go get it done. Also, our larger SAKs and Multis can save our bacon. A few months ago, I come across a huge water leak. Water everywhere. I would have had to run back to the shop, get a wrench, run back and shut the water off. All I had to do was use my Surge and shut the water off. Now the Surge did not fix it, but I was able to shut the water off right then and there and keep anymore damage from happening. On the farm alone, I have saved a few animals with my Surge once and with my Supertimer because they where able to cut or score the wire the animals were tangled up in. I would have hated to have to go all the way back to the shop just to get a pair of wire cutters and go back to cut out a dead cow.Day whatever , as the challenge starts to drag out, it has made me really appreciate a good MT " Spirit " . The minimalist just doesn't cover my work needs and frankly cost me time and money. I'm still in for the 30 days but I'll never do this again. :)
Sak's rule !
I think this is meant to cover situations where you'd use another regular EDC item. When dealing with work problems, you have dedicated tools that you use, even when you EDC a Wave, SwissChamp or other. If you need a hammer or a pipe wrench, you have that at work and use it. You'd not use your regular EDC.
Am I right about this?...
I use other knifes at home (bread knife, butter knife...). I use my Sportsman when I would use any EDC SAK/knife/MT.
That would have been a major loss of money.
I am with Colt on this one, I will try to stick it out, but I won't do it again. I do have to admit, it has been kinda fun. Sometimes I get that "OMG WHAT THE SMURF WAS I THINKING" moments.
Nate
Well said !
Sak's rule !
Ahhhh, you hard working guys with happy well adjusted lives..... :pok: ;)
My "no life" status is allowing me to breeze through the challenge. :facepalm:
Breeze........ That's not going to work ! No stogies for you...
Sak's rule !
Post by: SAK Guy on October 09, 2014, 03:46:03 PM
You kinda lost me. I think I get what you are saying. People like Joel, Colt and I don't always have instant access to regular tools unless we want to carry a big heavy tool box. We have to go back and forth to a shop to fix things that otherwise out Larger SAK or MT would have fixed easy. Time saved. And time equals money. Now if I know I got a certain job that needs done, I will grab the tool bag, load up what tools I need and go get it done. Also, our larger SAKs and Multis can save our bacon. A few months ago, I come across a huge water leak. Water everywhere. I would have had to run back to the shop, get a wrench, run back and shut the water off. All I had to do was use my Surge and shut the water off. Now the Surge did not fix it, but I was able to shut the water off right then and there and keep anymore damage from happening. On the farm alone, I have saved a few animals with my Surge once and with my Supertimer because they where able to cut or score the wire the animals were tangled up in. I would have hated to have to go all the way back to the shop just to get a pair of wire cutters and go back to cut out a dead cow.Day whatever , as the challenge starts to drag out, it has made me really appreciate a good MT " Spirit " . The minimalist just doesn't cover my work needs and frankly cost me time and money. I'm still in for the 30 days but I'll never do this again. :)
Sak's rule !
I think this is meant to cover situations where you'd use another regular EDC item. When dealing with work problems, you have dedicated tools that you use, even when you EDC a Wave, SwissChamp or other. If you need a hammer or a pipe wrench, you have that at work and use it. You'd not use your regular EDC.
Am I right about this?...
I use other knifes at home (bread knife, butter knife...). I use my Sportsman when I would use any EDC SAK/knife/MT.
That would have been a major loss of money.
I am with Colt on this one, I will try to stick it out, but I won't do it again. I do have to admit, it has been kinda fun. Sometimes I get that "OMG WHAT THE SMURF WAS I THINKING" moments.
Nate
Well said !
Sak's rule !
Ahhhh, you hard working guys with happy well adjusted lives..... :pok: ;)
My "no life" status is allowing me to breeze through the challenge. :facepalm:
Breeze........ That's not going to work ! No stogies for you...
Sak's rule !
:ahhh :ahhh :ahhh :ahhh :ahhh
Whip me, beat me but don't take my stogies away.....
And, I guess "breeze" was probably the wrong word..."suffering the tortures of the damned" is probably more accurate. (Hey, I was only on my 2nd cup of coffee. :doh:)
Post by: Toolslinger on October 09, 2014, 04:35:10 PM
That being said, I am debating switching back to my regular carry starting Sunday. Need to travel and while I have some dedicated tools in the vehicle, I know where I'm going there is a high probability of needing to do odd-jobs. I'd hate to be caught out.
Will need to think on it more before deciding...
Post by: derekmac on October 09, 2014, 04:58:53 PM
Post by: shark_za on October 09, 2014, 05:03:21 PM
Say hello to an Excelsior and a Wenger Nail Clip 580 ;)
Post by: derekmac on October 09, 2014, 05:06:09 PM
One of the tasks my little waiter did today was open a box that contained some more minimalist brothers.Hello Excelsior and Wenger Nail Clip! :waving:
Say hello to an Excelsior and a Wenger Nail Clip 580 ;)
Post by: Caranthanus on October 09, 2014, 05:35:22 PM
(http://s23.postimg.org/kdxzscre3/image.jpg)
:gimme:
Post by: Monrogue on October 09, 2014, 05:52:03 PM
I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
Post by: pfrsantos on October 09, 2014, 05:53:39 PM
One of the tasks my little waiter did today was open a box that contained some more minimalist brothers.Hello Excelsior and Wenger Nail Clip! :waving:
Say hello to an Excelsior and a Wenger Nail Clip 580 ;)
You're doing it wrong!!!!
:twak: :twak: :twak: :twak:
hello to an Excelsior and a Wenger Nail Clip 580 ;)
:D :D
Post by: eddie1115 on October 09, 2014, 05:56:57 PM
One of the tasks my little waiter did today was open a box that contained some more minimalist brothers.Hello Excelsior and Wenger Nail Clip! :waving:
Say hello to an Excelsior and a Wenger Nail Clip 580 ;)
You're doing it wrong!!!!
:twak: :twak: :twak: :twak:
hello to an Excelsior and a Wenger Nail Clip 580 ;)
:D :D
Technically you're both doing it wrong by typing instead of speaking out loud ;)
...unless you also said it out loud, then kudos :tu:
Post by: pfrsantos on October 09, 2014, 06:04:45 PM
I always speak out loud everything I type in my computer. That's how I got my own private office.One of the tasks my little waiter did today was open a box that contained some more minimalist brothers.Hello Excelsior and Wenger Nail Clip! :waving:
Say hello to an Excelsior and a Wenger Nail Clip 580 ;)
You're doing it wrong!!!!
:twak: :twak: :twak: :twak:
hello to an Excelsior and a Wenger Nail Clip 580 ;)
:D :D
Technically you're both doing it wrong by typing instead of speaking out loud ;)
...unless you also said it out loud, then kudos :tu:
:tu:
(smileys are a little difficult but I got that perfected now!)
Post by: SAK Guy on October 09, 2014, 06:07:46 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/Whatamorning_zpsf817a40b.jpg)
Post by: Toolslinger on October 09, 2014, 06:10:19 PM
I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
NOOOOOOOOOOOO! :ahhh
https://www.youtube.com/watch?v=WWaLxFIVX1s
Post by: eddie1115 on October 09, 2014, 06:22:58 PM
I always speak out loud everything I type in my computer. That's how I got my own private office.One of the tasks my little waiter did today was open a box that contained some more minimalist brothers.Hello Excelsior and Wenger Nail Clip! :waving:
Say hello to an Excelsior and a Wenger Nail Clip 580 ;)
You're doing it wrong!!!!
:twak: :twak: :twak: :twak:
hello to an Excelsior and a Wenger Nail Clip 580 ;)
:D :D
Technically you're both doing it wrong by typing instead of speaking out loud ;)
...unless you also said it out loud, then kudos :tu:
:tu:
(smileys are a little difficult but I got that perfected now!)
I was hoping that was the case, sounds like a fun way to work. I work from home, so I don't think anyone would mind. :D
Post by: ducttapetech on October 09, 2014, 06:49:49 PM
What a great morning!!!Lol! Cool pic!
(http://i833.photobucket.com/albums/zz256/SAKGuy/Whatamorning_zpsf817a40b.jpg)
Nate
Post by: SAK Guy on October 09, 2014, 06:52:39 PM
Post by: derekmac on October 09, 2014, 07:33:18 PM
It does! :cry: :cry: :cry:I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
What a great morning!!!What a great pic! :tu:
(http://i833.photobucket.com/albums/zz256/SAKGuy/Whatamorning_zpsf817a40b.jpg)
Post by: SAK Guy on October 09, 2014, 07:39:15 PM
Post by: pfrsantos on October 09, 2014, 07:39:43 PM
It does! :cry: :cry: :cry:I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
Womp womp womp (http://www.youtube.com/watch?v=tKdcjJoXeEY#)
:rofl: :rofl: :rofl: :rofl:
I'm so mean...
Post by: Etherealicer on October 09, 2014, 08:18:34 PM
To quote Louis: RIEN
Post by: Monrogue on October 09, 2014, 08:34:13 PM
It does! :cry: :cry: :cry:I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
I don't think he meant for you to go minimalist all the way :pok: :twak:
Post by: derekmac on October 09, 2014, 08:35:29 PM
Well I did wear pants today. :tu:It does! :cry: :cry: :cry:I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
I don't think he meant for you to go minimalist all the way :pok: :twak:
Post by: magentus on October 09, 2014, 08:39:11 PM
Post by: arizonaranchman on October 09, 2014, 09:02:17 PM
Well I did wear pants today. :tu:It does! :cry: :cry: :cry:I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
I don't think he meant for you to go minimalist all the way :pok: :twak:
How is that even possible???? lol
I'd sooner leave without my shoes than my pocket knife! :facepalm:
Post by: Toolslinger on October 09, 2014, 09:24:42 PM
Well I did wear pants today. :tu:It does! :cry: :cry: :cry:I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
I don't think he meant for you to go minimalist all the way :pok: :twak:
How is that even possible???? lol
I'd sooner leave without my shoes than my pocket knife! :facepalm:
My pants aren't considered 'on' until the SAK is in the pocket.
Post by: AimlessWanderer on October 09, 2014, 09:28:57 PM
Well I did wear pants today. :tu:It does! :cry: :cry: :cry:I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
I don't think he meant for you to go minimalist all the way :pok: :twak:
How is that even possible???? lol
I'd sooner leave without my shoes than my pocket knife! :facepalm:
My pants aren't considered 'on' until the SAK is in the pocket.
You put them on inside out? :think:
...
Oh, I see what you mean :whistle:
:angel:
Post by: Toolslinger on October 09, 2014, 09:32:36 PM
Well I did wear pants today. :tu:It does! :cry: :cry: :cry:I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
I don't think he meant for you to go minimalist all the way :pok: :twak:
How is that even possible???? lol
I'd sooner leave without my shoes than my pocket knife! :facepalm:
My pants aren't considered 'on' until the SAK is in the pocket.
You put them on inside out? :think:
...
Oh, I see what you mean :whistle:
:angel:
:rofl:
Well played :salute:.
(It's easier to cut a hole in the pocket material anyway :D)
Post by: kirk13 on October 09, 2014, 11:41:56 PM
Back to work after two days of the front door debacle...and today the Appie recorded its first fail!
Needed to get the Phillips screw out of a shattered wheel hub on a flipping 360 'car' . It was an odd sized screw head that had already been slightly mullered,and the Appies Phillips just couldn't get a grip. Small flat driver on shotgun KST had to deal with it.
I knew there'd be a fail...I just hadn't expected it to be on a phillips :ahhh
Post by: arizonaranchman on October 10, 2014, 01:36:44 AM
Post by: Monrogue on October 10, 2014, 02:57:52 AM
Well I did wear pants today. :tu:It does! :cry: :cry: :cry:I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
I don't think he meant for you to go minimalist all the way :pok: :twak:
How is that even possible???? lol
I'd sooner leave without my shoes than my pocket knife! :facepalm:
My pants aren't considered 'on' until the SAK is in the pocket.
I'm the same way actually. I don't feel completely dressed until I have equipped myself with a SAK and MT combo, or one of them at least.
And Derek, it's good to know you at least remembered your pants :rofl:
Post by: Toolslinger on October 10, 2014, 03:04:56 AM
Post by: Hyatt181 on October 10, 2014, 04:40:07 AM
Sent from my iPhone using Tapatalk
Post by: derekmac on October 10, 2014, 12:28:19 PM
I almost went commando today! :ahhh :rofl:Well I did wear pants today. :tu:It does! :cry: :cry: :cry:I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
I don't think he meant for you to go minimalist all the way :pok: :twak:
How is that even possible???? lol
I'd sooner leave without my shoes than my pocket knife! :facepalm:
My pants aren't considered 'on' until the SAK is in the pocket.
I'm the same way actually. I don't feel completely dressed until I have equipped myself with a SAK and MT combo, or one of them at least.
And Derek, it's good to know you at least remembered your pants :rofl:
I did remember my Pioneer today though! :tu:
Post by: pfrsantos on October 10, 2014, 12:41:15 PM
Post by: Singh on October 10, 2014, 01:19:23 PM
- Scissors: trimmed fingernails
- Scissors: opened a bag of grass seed.
- File/Screwdriver: opened a small can of varnish.
- Scissors: trimmed down a foam brush so it could fit in the small varnish can.
- Knife: scraped off an excess blob of dried varnish.
- Knife: cut up an apple for myself and the guinea pigs.
Post by: SAK Guy on October 10, 2014, 02:21:08 PM
I almost went commando today! :ahhh :rofl:Well I did wear pants today. :tu:It does! :cry: :cry: :cry:I FORGOT TO PUT MY PIONEER IN MY POCKET TODAY!!!! :ahhh :ahhh :ahhh :ahhh
:twak: :twak:
So does this mean you're carrying nothing at all??
I don't think he meant for you to go minimalist all the way :pok: :twak:
How is that even possible???? lol
I'd sooner leave without my shoes than my pocket knife! :facepalm:
My pants aren't considered 'on' until the SAK is in the pocket.
I'm the same way actually. I don't feel completely dressed until I have equipped myself with a SAK and MT combo, or one of them at least.
And Derek, it's good to know you at least remembered your pants :rofl:
I did remember my Pioneer today though! :tu:
Well, that's all that matters, really...... ;)
Post by: Toolslinger on October 10, 2014, 04:37:04 PM
I've never used the pen for actually writing. Also, makes me want to put Plus Scales on all my SAKs just in case. When I carry an MT, I have a piece of coat hanger I keep tucked in the bit sleeve for similar things.
Then I used the scissors to trim tags.
Post by: pfrsantos on October 10, 2014, 04:44:59 PM
Unlocked a bathroom door with the pen from the Compact. :tu: It's just long enough to insert into the hole in the knob to press the release mechanism inside. I used the butt end first to prevent damage to the pen.
I've never used the pen for actually writing. Also, makes me want to put Plus Scales on all my SAKs just in case. When I carry an MT, I have a piece of coat hanger I keep tucked in the bit sleeve for similar things.
Then I used the scissors to trim tags.
Yup, makes sense...
:D :D
Post by: AimlessWanderer on October 10, 2014, 05:18:03 PM
Unlocked a bathroom door with the pen from the Compact. :tu: It's just long enough to insert into the hole in the knob to press the release mechanism inside. I used the butt end first to prevent damage to the pen.
I've never used the pen for actually writing. Also, makes me want to put Plus Scales on all my SAKs just in case. When I carry an MT, I have a piece of coat hanger I keep tucked in the bit sleeve for similar things.
Then I used the scissors to trim tags.
Yup, makes sense...
:D :D
I'm glad you highlighted THAT part of the paragraph and not another part :ahhh :ahhh :ahhh
Post by: SAK Guy on October 10, 2014, 05:18:50 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/EDCPioneerQS_zpsa0cae283.jpg)
Post by: eddie1115 on October 10, 2014, 05:21:35 PM
(*side note: The Crunch has been on my wish list for about 3 years, but it's not cheap and it's still in production, so I've waited. I was hoping to get one for Christmas.)
As I go to hand it back, I comment about how nice it is and how I was going to ask for one. So he just gave it to me! Said he had two, and wanted an excuse to use his newer one (good man ;) )
So in an effort to not be rude, I HAD to carry it the rest of the day ;) And it got plenty of use.
Back to the Tourist today though...
Post by: pfrsantos on October 10, 2014, 05:31:05 PM
:twak: :twak:
Post by: eddie1115 on October 10, 2014, 05:36:26 PM
(http://cdn.meme.am/instances/500x/55183312.jpg)I think that's an ok way to lose the challenge :) I'll keep going anyway.
:twak: :twak:
Post by: colt 1911 on October 10, 2014, 05:37:53 PM
So I sort of failed yesterday...I was helping a buddy move (really wanted an MT on me, but settled for bringing along a tool bag). As we're taking apart a bed frame, I realize I left the crescent wrench downstairs. My buddy's dad pulls out his LM Crunch and hands it to me.
(*side note: The Crunch has been on my wish list for about 3 years, but it's not cheap and it's still in production, so I've waited. I was hoping to get one for Christmas.)
As I go to hand it back, I comment about how nice it is and how I was going to ask for one. So he just gave it to me! Said he had two, and wanted an excuse to use his newer one (good man ;) )
So in an effort to not be rude, I HAD to carry it the rest of the day ;) And it got plenty of use.
Back to the Tourist today though...
I think you should get a mulligan for that....
Sak's rule !
Post by: eddie1115 on October 10, 2014, 05:43:13 PM
Post by: Toolslinger on October 10, 2014, 06:48:10 PM
Post by: gustophersmob on October 10, 2014, 06:59:40 PM
So I sort of failed yesterday...I was helping a buddy move (really wanted an MT on me, but settled for bringing along a tool bag). As we're taking apart a bed frame, I realize I left the crescent wrench downstairs. My buddy's dad pulls out his LM Crunch and hands it to me.
(*side note: The Crunch has been on my wish list for about 3 years, but it's not cheap and it's still in production, so I've waited. I was hoping to get one for Christmas.)
As I go to hand it back, I comment about how nice it is and how I was going to ask for one. So he just gave it to me! Said he had two, and wanted an excuse to use his newer one (good man ;) )
So in an effort to not be rude, I HAD to carry it the rest of the day ;) And it got plenty of use.
Back to the Tourist today though...
I think you should get a mulligan for that....
Sak's rule !
+1
That's very cool of him!
Post by: pfrsantos on October 10, 2014, 07:28:01 PM
(http://cdn.meme.am/instances/500x/55183312.jpg)I think that's an ok way to lose the challenge :) I'll keep going anyway.
:twak: :twak:
This was just for fun. I think you didn't break the rules because someone gave it to you, you didn't went for it.
:tu: :tu:
Post by: eddie1115 on October 10, 2014, 07:40:02 PM
Post by: kirk13 on October 10, 2014, 09:17:03 PM
Lots of box bashing today,but no use of the Appies other tools.
One thing that the challenge is proving to me is that for regular use,the extra width of firstly Cellidor,and secondly a second layer are beneficial! I do like the app I but it lacks a certain presence in the hand. The Evo scales of the J10 give it a much more substantial feel
Post by: Etherealicer on October 10, 2014, 10:18:01 PM
Easy today, but tomorrow I help my brother-in-law move, thats going to be tough :ahhh
Post by: CanadianLMfan on October 10, 2014, 10:28:10 PM
Post by: Etherealicer on October 10, 2014, 10:38:21 PM
Too late for me to join. :(Good to have you back, be glad you are too late, you can't :twak: anyone with a 58mm SAK
Post by: CanadianLMfan on October 10, 2014, 10:39:35 PM
Too late for me to join. :(Good to have you back, be glad you are too late, you can't :twak: anyone with a 58mm SAK
I'm still ahead in posts! :woohoo:
Post by: Caranthanus on October 10, 2014, 11:02:44 PM
Yawn..... :D+1 :facepalm:
(http://s4.postimg.org/hjvgx2ahp/image.jpg)
;)
Post by: getahl on October 11, 2014, 12:14:33 AM
Post by: ducttapetech on October 11, 2014, 12:29:01 AM
Ahead of who? :twak:Too late for me to join. :(Good to have you back, be glad you are too late, you can't :twak: anyone with a 58mm SAK
I'm still ahead in posts! :woohoo:
Glad to have you back!
Nate
Post by: nate j on October 11, 2014, 03:17:25 AM
So I sort of failed yesterday...I was helping a buddy move (really wanted an MT on me, but settled for bringing along a tool bag). As we're taking apart a bed frame, I realize I left the crescent wrench downstairs. My buddy's dad pulls out his LM Crunch and hands it to me.
(*side note: The Crunch has been on my wish list for about 3 years, but it's not cheap and it's still in production, so I've waited. I was hoping to get one for Christmas.)
As I go to hand it back, I comment about how nice it is and how I was going to ask for one. So he just gave it to me! Said he had two, and wanted an excuse to use his newer one (good man ;) )
So in an effort to not be rude, I HAD to carry it the rest of the day ;) And it got plenty of use.
Back to the Tourist today though...
I think you should get a mulligan for that....
I agree. Clearly receiving a gift should be an exception.
Post by: gene stoner on October 11, 2014, 04:59:33 AM
Post by: colt 1911 on October 11, 2014, 06:19:55 AM
Sak's rule !
Post by: arizonaranchman on October 11, 2014, 09:20:14 AM
I failed also, my dog did a header into some cactus. Grabbed the Pulse for spine removal. Poor dog !
Sak's rule !
Awesome job 1911, that's a great save! Hope Lassie is feeling better now :)
Post by: magentus on October 11, 2014, 10:38:12 AM
Great gig from the metal /jazz/folk giants.
Post by: colt 1911 on October 11, 2014, 04:14:31 PM
I failed also, my dog did a header into some cactus. Grabbed the Pulse for spine removal. Poor dog !
Sak's rule !
Awesome job 1911, that's a great save! Hope Lassie is feeling better now :)
All is well, thanks !
Sak's rule !
Post by: AimlessWanderer on October 11, 2014, 04:20:01 PM
Thankfully I've not needed it yet
Post by: kirk13 on October 11, 2014, 06:16:54 PM
In fairness there's no way the Appie could safely be used to removed wiring plugs from a Tamiya radio receiver,but still,I needed to go for the shotgun MT!
Post by: SAK Guy on October 11, 2014, 06:26:31 PM
:kirky:
:D
Post by: kirk13 on October 11, 2014, 06:39:35 PM
According to this sign, you have only yourself to blame...
:kirky:
:D
A fact I've come to accept!
Post by: Etherealicer on October 11, 2014, 09:41:44 PM
I too have report a fail. But at least I can blame kirky
:kirky:
Putting together cabinets with the tiny Midnight Manager proofed to be very inefficient, so I went for the power drill... Fortunately, I could borrow this beast from my boss:
(http://hybrisimages.toolcommerce.com//prod/500X500/DCD785C2_1_500X500.jpg)
1.6 kg of power and fun :D, best compact battery powered drill EVER :D
Post by: derekmac on October 11, 2014, 09:56:40 PM
Every Grunt from Home Improvement (http://www.youtube.com/watch?v=YQwYNca4iog#)
Post by: mrynnr on October 11, 2014, 10:01:46 PM
Post by: Etherealicer on October 11, 2014, 10:25:47 PM
^^:rofl:
Every Grunt from Home Improvement (http://www.youtube.com/watch?v=YQwYNca4iog#)
Can someone explain to me what that ice-gun (7:49) is?
Post by: hiraethus on October 11, 2014, 11:22:26 PM
Post by: Monrogue on October 11, 2014, 11:48:30 PM
Post by: kirk13 on October 12, 2014, 12:25:02 AM
The Pioneer saw lots of action in the shed today - I was building a bike for the winter so lots of packets and boxes got opened, tape trimmed and holes poked with the ream. A multi with pliers and a file would have been very handy but fortunately I had full size tools in the toolkit so was able to use those instead.
Cough cough
:worthless:
Post by: Caranthanus on October 12, 2014, 12:52:06 AM
I failed. I needed the pliers today.You should had borrowed them from a neighbor :facepalm:
;)
Post by: eddie1115 on October 12, 2014, 02:08:03 AM
Post by: gustophersmob on October 12, 2014, 03:15:21 AM
I lost count of the day, it has been too many...
I too have report a fail. But at least I can blame kirky
:kirky:
Putting together cabinets with the tiny Midnight Manager proofed to be very inefficient, so I went for the power drill... Fortunately, I could borrow this beast from my boss:
(http://hybrisimages.toolcommerce.com//prod/500X500/DCD785C2_1_500X500.jpg)
1.6 kg of power and fun :D, best compact battery powered drill EVER :D
I have that drill. Very nice, but they have a tendency to have some chuck wobble. I played with them in the store until I found one that was OK.
Post by: gustophersmob on October 12, 2014, 03:16:30 AM
Nothing else to report.
Post by: Monrogue on October 12, 2014, 03:30:21 AM
Post by: getahl on October 12, 2014, 04:56:15 AM
-unlocked one of our bathroom doors that my three year old had locked.
-cut tags off of some new baby clothes
That was about it
Post by: SAK Guy on October 12, 2014, 04:07:32 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/Pioneerrainwater3_zpsd814d639.jpg)
Post by: kirk13 on October 12, 2014, 04:10:20 PM
Pioneer on this cool, wet morning!
(http://i833.photobucket.com/albums/zz256/SAKGuy/Pioneerrainwater3_zpsd814d639.jpg)
Great picture :tu:
Post by: derekmac on October 12, 2014, 04:18:52 PM
+1, awesome shot!Pioneer on this cool, wet morning!
Great picture :tu:
Post by: SAK Guy on October 12, 2014, 04:23:42 PM
Pioneer on this cool, wet morning!
(http://i833.photobucket.com/albums/zz256/SAKGuy/Pioneerrainwater3_zpsd814d639.jpg)
Great picture :tu:
Thank you Kirk! Very kind of you to say! :salute:
Post by: SAK Guy on October 12, 2014, 04:36:11 PM
+1, awesome shot!Pioneer on this cool, wet morning!
Great picture :tu:
Thx D-Mac!, I appreciate it! :salute:
I was seeing bold art deco color, Saturn rings etc.....coffee is working this morning. :D
Post by: ducttapetech on October 12, 2014, 04:41:20 PM
Welcome to the Trade Forums. In order to keep things fair for everyone, we have a few rules that we ask everyone to adhere to:This is not a fail. This is regular tool.
1- Please post a price, even in trades. People will have a better idea of how interested they are in your item or what to offer you if they have a reference point.
2- Please mark something sold when it is sold. This will keep you from being continually harassed with offers after the item is gone.
3- No dealers please. Dealers can contact me at info@multitool.org for options available for them.
4- Anyone using this forum to buy, sell or trade any items are responsible for determining legality, condition, postal rates or any other matters involved in the trade. Multitool.org does not in any way, shape or form assume any liability for any trade problems that might arise. This forum is offered as a free service to members, and it is up to those members to be aware of what they are trading, and whom they are trading with.
These rules are subject to interpretation by the Moderator staff here at Multitool.org, and the decision of any Moderator will be considered final. If you have any questions, please feel free to contact me at info@multitool.org. Failure to follow these rules when posting here could result in deletion of the post and/or further action to be taken.
Thanks for your co-operation and good luck selling!
Def
Nice looking drill btw.
Nate
Post by: AimlessWanderer on October 12, 2014, 04:51:14 PM
Welcome to the Trade Forums. In order to keep things fair for everyone, we have a few rules that we ask everyone to adhere to:This is not a fail. This is regular tool.
1- Please post a price, even in trades. People will have a better idea of how interested they are in your item or what to offer you if they have a reference point.
2- Please mark something sold when it is sold. This will keep you from being continually harassed with offers after the item is gone.
3- No dealers please. Dealers can contact me at info@multitool.org for options available for them.
4- Anyone using this forum to buy, sell or trade any items are responsible for determining legality, condition, postal rates or any other matters involved in the trade. Multitool.org does not in any way, shape or form assume any liability for any trade problems that might arise. This forum is offered as a free service to members, and it is up to those members to be aware of what they are trading, and whom they are trading with.
These rules are subject to interpretation by the Moderator staff here at Multitool.org, and the decision of any Moderator will be considered final. If you have any questions, please feel free to contact me at info@multitool.org. Failure to follow these rules when posting here could result in deletion of the post and/or further action to be taken.
Thanks for your co-operation and good luck selling!
Def
Nice looking drill btw.
Nate
:think:
Post by: ducttapetech on October 12, 2014, 04:52:04 PM
Nate
Post by: coSAK on October 12, 2014, 05:19:36 PM
Welcome to the Trade Forums. In order to keep things fair for everyone, we have a few rules that we ask everyone to adhere to:This is not a fail. This is regular tool.
1- Please post a price, even in trades. People will have a better idea of how interested they are in your item or what to offer you if they have a reference point.
2- Please mark something sold when it is sold. This will keep you from being continually harassed with offers after the item is gone.
3- No dealers please. Dealers can contact me at info@multitool.org for options available for them.
4- Anyone using this forum to buy, sell or trade any items are responsible for determining legality, condition, postal rates or any other matters involved in the trade. Multitool.org does not in any way, shape or form assume any liability for any trade problems that might arise. This forum is offered as a free service to members, and it is up to those members to be aware of what they are trading, and whom they are trading with.
These rules are subject to interpretation by the Moderator staff here at Multitool.org, and the decision of any Moderator will be considered final. If you have any questions, please feel free to contact me at info@multitool.org. Failure to follow these rules when posting here could result in deletion of the post and/or further action to be taken.
Thanks for your co-operation and good luck selling!
Def
Nice looking drill btw.
Nate
:think:
+1
Post by: ducttapetech on October 12, 2014, 06:05:29 PM
Nate
Post by: shark_za on October 12, 2014, 06:17:51 PM
The combo tool passed with flying colors.
I think the type of tin rim actually suits the opener on this tool, moving backwards Wenger style seems easier to me too.
Post by: hiraethus on October 12, 2014, 07:43:49 PM
Cough cough
:worthless:
Sorry, no pics. Learnt my lesson about that the hard (read: expensive) way recently.
Turns out the Pioneer awl is perfect for drilling holes in plastic mudguards though. Left the Pioneer down the shed so had to grab a Tinker this afternoon. Quite nice to have a small pen blade in my pocket - it can do stuff the Pioneer just can't manage as nicely.
Post by: Etherealicer on October 12, 2014, 08:48:52 PM
Stayed at home, barbecued home-made burgers. Now I'm sick because I ate too much. Nothing a larger tool-set could have prevented.
Post by: colt 1911 on October 12, 2014, 09:49:07 PM
Took the Compact 1911 out in the woods for an over nighter.
Nate
Nice !
Sak's rule !
Post by: Hyatt181 on October 13, 2014, 01:52:28 AM
The pen was used to mark and the knife blade was good enough to score the dowel and then brake. No farmer needed.
Dowel rods were used to put the tent back up.
(http://tapatalk.imageshack.com/v2/14/10/12/cd587cca4e6d5ee0b21e758f286bae18.jpg)
Sent from my iPhone using Tapatalk
Post by: Hyatt181 on October 13, 2014, 01:53:07 AM
Sent from my iPhone using Tapatalk
Post by: Higgins617 on October 13, 2014, 01:56:18 AM
Post by: gustophersmob on October 13, 2014, 02:02:30 AM
Used the Esquire to pop some scales off while I started trying to make my first set of wood scales.
Cool! For what knife and what kind of wood?
Post by: SAK Guy on October 13, 2014, 02:42:32 AM
Our Schnauzer chased cows outta the yard this evening...she usually stays on the road but she went cross country after the cows and had about 50 grass burrs in her feet and legs. I had to break out the Swiss Champ and use it's pliers and scissors to get them all out.....
So I'm out of the running but in keeping with the spirit of the challenge, will still EDC my Pioneer/SI the rest of the month. :tu:
Post by: Higgins617 on October 13, 2014, 02:51:39 AM
Used the Esquire to pop some scales off while I started trying to make my first set of wood scales.
Cool! For what knife and what kind of wood?
For a Vic Camper, and I believe it's cedar. Left over from another project.
Post by: haackeg on October 13, 2014, 09:16:19 AM
Then my new Rebar came in ..........
Post by: kirk13 on October 13, 2014, 09:47:31 AM
Then we repaired grandmas tire. No knife needed. (http://tapatalk.imageshack.com/v2/14/10/12/bf8c82640dacc88e779b74d0cb63a4df.jpg)
Sent from my iPhone using Tapatalk
Cute :D...but what car is that in the garage?
Post by: hiraethus on October 13, 2014, 09:50:05 AM
Post by: coSAK on October 13, 2014, 10:39:56 AM
Fail report..... :(:twak: :oops: :facepalm:
[...]
So I'm out of the running [...]
[...] but in keeping with the spirit of the challenge, will still EDC my Pioneer/SI the rest of the month. :tu::salute:
Post by: Hyatt181 on October 13, 2014, 12:27:57 PM
Sent from my iPhone using Tapatalk
Post by: kirk13 on October 13, 2014, 12:35:22 PM
In the US its a vw Thing. In UK its a vw trekker. I've had it for 21 years now.
Sent from my iPhone using Tapatalk
Looks like a VW Trekker. Very nice, and a good colour too.
Cheers :tu:
Post by: Etherealicer on October 13, 2014, 12:43:27 PM
We need photos HERE (http://forum.multitool.org/index.php/topic,49515.250.html)In the US its a vw Thing. In UK its a vw trekker. I've had it for 21 years now.
Sent from my iPhone using TapatalkLooks like a VW Trekker. Very nice, and a good colour too.
Cheers :tu:
Post by: colt 1911 on October 13, 2014, 01:47:30 PM
Fail report..... :(
Our Schnauzer chased cows outta the yard this evening...she usually stays on the road but she went cross country after the cows and had about 50 grass burrs in her feet and legs. I had to break out the Swiss Champ and use it's pliers and scissors to get them all out.....
So I'm out of the running but in keeping with the spirit of the challenge, will still EDC my Pioneer/SI the rest of the month. :tu:
Nice one, does she have bald spots everywhere :) people tend to shake a bit when going through SAK withdrawals.
Sak's rule !
Post by: SAK Guy on October 13, 2014, 02:15:49 PM
Fail report..... :(
Our Schnauzer chased cows outta the yard this evening...she usually stays on the road but she went cross country after the cows and had about 50 grass burrs in her feet and legs. I had to break out the Swiss Champ and use it's pliers and scissors to get them all out.....
So I'm out of the running but in keeping with the spirit of the challenge, will still EDC my Pioneer/SI the rest of the month. :tu:
Nice one, does she have bald spots everywhere :) people tend to shake a bit when going through SAK withdrawals.
Sak's rule !
LOL, no, she's so fuzzy I didn't notice any. She had about 10 on each foot...she chased 'em till too stove up to walk...had to carry her in. Those SAK Pliers are the absolute best thing I've found on grass burrs.
Post by: Hyatt181 on October 13, 2014, 05:48:09 PM
There are some pics in there somewhere. One of the pages.We need photos HERE (http://forum.multitool.org/index.php/topic,49515.250.html)In the US its a vw Thing. In UK its a vw trekker. I've had it for 21 years now.
Sent from my iPhone using TapatalkLooks like a VW Trekker. Very nice, and a good colour too.
Cheers :tu:
Sent from my iPhone using Tapatalk
Post by: Etherealicer on October 13, 2014, 07:17:25 PM
Found only one :ahhh and its tiny :ahhhThere are some pics in there somewhere. One of the pages.We need photos HERE (http://forum.multitool.org/index.php/topic,49515.250.html)In the US its a vw Thing. In UK its a vw trekker. I've had it for 21 years now.
Sent from my iPhone using TapatalkLooks like a VW Trekker. Very nice, and a good colour too.
Cheers :tu:
Sent from my iPhone using Tapatalk
Post by: hiraethus on October 13, 2014, 07:52:02 PM
Post by: pfrsantos on October 13, 2014, 07:54:31 PM
:facepalm:
Post by: magentus on October 13, 2014, 08:40:27 PM
Post by: Higgins617 on October 13, 2014, 08:41:55 PM
Post by: arizonaranchman on October 13, 2014, 08:49:12 PM
The mighty Pioneer :)
Post by: Caranthanus on October 13, 2014, 10:15:56 PM
Fail!!! Had to lace a new spoke on a friend's bike and couldn't take the cassette off so I needed to work it over the cog. I couldn't do it without needlenose pliers so the sidekick got the nod :oops:You should have left the job to your friend :pok: ... what are friends for? :think:
:facepalm:
Post by: Higgins617 on October 13, 2014, 10:18:38 PM
Post by: Caranthanus on October 13, 2014, 10:29:54 PM
My friends aren't exactly what you could call mechanically inclined. Being at college just makes it worse, who brings tools to college(besides me)A janitor ... :think:
:whistle:
Post by: kirk13 on October 13, 2014, 10:43:25 PM
My friends aren't exactly what you could call mechanically inclined. Being at college just makes it worse, who brings tools to college(besides me)
Sounds like my work :whistle:
Post by: SAK Guy on October 13, 2014, 10:53:11 PM
(http://i1145.photobucket.com/albums/o501/alpineharleydavidson/Pioneer%20SAK%209-12-14/3A116E76-731F-401E-90A0-61E1DF3D1BCE_zpsew9sysmn.jpg)
The mighty Pioneer :)
Cool pic AZR!!!
Post by: coSAK on October 14, 2014, 12:02:52 AM
+1(http://i1145.photobucket.com/albums/o501/alpineharleydavidson/Pioneer%20SAK%209-12-14/3A116E76-731F-401E-90A0-61E1DF3D1BCE_zpsew9sysmn.jpg)
The mighty Pioneer :)
Cool pic AZR!!!
Post by: Monrogue on October 14, 2014, 04:34:41 AM
Post by: SAK Guy on October 14, 2014, 04:48:33 AM
Fail report..... :(:twak: :oops: :facepalm:
[...]
So I'm out of the running [...][...] but in keeping with the spirit of the challenge, will still EDC my Pioneer/SI the rest of the month. :tu::salute:
Thx bud! :cheers:
Post by: getahl on October 14, 2014, 05:10:56 AM
Removed a tag from a blanket, for my son, with the scissors, and opened a few packages today with the blade.
Post by: zoidberg on October 14, 2014, 08:43:04 AM
(https://farm4.staticflickr.com/3940/15508986346_40dc2b00a3.jpg) (https://flic.kr/p/pCtBjj)
(https://farm4.staticflickr.com/3955/15532691655_1b91b1a85f.jpg) (https://flic.kr/p/pEz75x)
(https://farm4.staticflickr.com/3931/15346532178_0a2e5ed681.jpg) (https://flic.kr/p/po7Zmo)
(https://farm6.staticflickr.com/5605/15529976801_0bf5f25406.jpg) (https://flic.kr/p/pEkc3H)
Post by: derekmac on October 14, 2014, 12:20:14 PM
Post by: zoidberg on October 14, 2014, 01:39:50 PM
Looks yummy!! :tu:
I liked it. :)
Post by: AimlessWanderer on October 14, 2014, 02:13:05 PM
However, the three screws holding the cap on proved to be a problem. My sockets are imperial, and the car is Japanese ... my screwdrivers were either too long or too bulky for the job. To make the whole experience more entertaining, it was pissing down too. The only way I could drive the screws with my dedicated tools was by setting the socket set up to drive 1/4" and using a Phillips bit. Of course, not being magnetic, the bit kept dropping out and disappearing into the ever growing puddles of rain under the car, but no other dedicated tools in my toolset were suitable alternatives ....
The knifeless MP400 in my pocket was just a little too clumsy for this particular role, and I didn't have a SAK in my pocket today. There was only one other tool in the car which was capable of getting in to where it needed - the Core that lives in the glove compartment. Pop out one of the arms at 90 degrees, and Robert's your aunties live in lover! Still an awkward job, but now least the car is back running again thanks to a pliers based multitool.
A minimalist SAK wouldn't have been able to help with that job, except possibly a Scientist, which might have been slim enough to get in the required spaces. I think I might switch the Wenger Toolchest that resides with the Core for a Cybertool as that might possibly have been slightly easier to use with the driver arm out at 90 degrees.
Just charging the phone now, and then I'll take it for a run just to be sure I've cured it
Post by: colt 1911 on October 14, 2014, 03:16:22 PM
Really glad I bailed out of this. Had more reinfocement today that having a wide range of tools is a very wise move. Today's fiasco was that the car wouldn't start! I knew I'd got an issue with the distributor from a similar occurence at the weekend. Ended up borrowing a mates car to go and get a new dizzie cap, but couldn't get a rotor arm from stock anywhere so I decided to just try replacing the cap and see if that worked
However, the three screws holding the cap on proved to be a problem. My sockets are imperial, and the car is Japanese ... my screwdrivers were either too long or too bulky for the job. To make the whole experience more entertaining, it was pissing down too. The only way I could drive the screws with my dedicated tools was by setting the socket set up to drive 1/4" and using a Phillips bit. Of course, not being magnetic, the bit kept dropping out and disappearing into the ever growing puddles of rain under the car, but no other dedicated tools in my toolset were suitable alternatives ....
The knifeless MP400 in my pocket was just a little too clumsy for this particular role, and I didn't have a SAK in my pocket today. There was only one other tool in the car which was capable of getting in to where it needed - the Core that lives in the glove compartment. Pop out one of the arms at 90 degrees, and Robert's your aunties live in lover! Still an awkward job, but now least the car is back running again thanks to a pliers based multitool.
A minimalist SAK wouldn't have been able to help with that job, except possibly a Scientist, which might have been slim enough to get in the required spaces. I think I might switch the Wenger Toolchest that resides with the Core for a Cybertool as that might possibly have been slightly easier to use with the driver arm out at 90 degrees.
Just charging the phone now, and then I'll take it for a run just to be sure I've cured it
Glad you got it running, where you just trying to fix it with a Sak or MT or do you carry dedicated tools in the car ?
Sak's rule !
Post by: colt 1911 on October 14, 2014, 03:21:31 PM
(http://tapatalk.imageshack.com/v2/14/10/14/a3f463874b0df119013748e503ac3c78.jpg)
Good luck you guys !
Sak's rule !
Post by: AimlessWanderer on October 14, 2014, 04:04:29 PM
Really glad I bailed out of this. Had more reinfocement today that having a wide range of tools is a very wise move. Today's fiasco was that the car wouldn't start! I knew I'd got an issue with the distributor from a similar occurence at the weekend. Ended up borrowing a mates car to go and get a new dizzie cap, but couldn't get a rotor arm from stock anywhere so I decided to just try replacing the cap and see if that worked
However, the three screws holding the cap on proved to be a problem. My sockets are imperial, and the car is Japanese ... my screwdrivers were either too long or too bulky for the job. To make the whole experience more entertaining, it was pissing down too. The only way I could drive the screws with my dedicated tools was by setting the socket set up to drive 1/4" and using a Phillips bit. Of course, not being magnetic, the bit kept dropping out and disappearing into the ever growing puddles of rain under the car, but no other dedicated tools in my toolset were suitable alternatives ....
The knifeless MP400 in my pocket was just a little too clumsy for this particular role, and I didn't have a SAK in my pocket today. There was only one other tool in the car which was capable of getting in to where it needed - the Core that lives in the glove compartment. Pop out one of the arms at 90 degrees, and Robert's your aunties live in lover! Still an awkward job, but now least the car is back running again thanks to a pliers based multitool.
A minimalist SAK wouldn't have been able to help with that job, except possibly a Scientist, which might have been slim enough to get in the required spaces. I think I might switch the Wenger Toolchest that resides with the Core for a Cybertool as that might possibly have been slightly easier to use with the driver arm out at 90 degrees.
Just charging the phone now, and then I'll take it for a run just to be sure I've cured it
Glad you got it running, where you just trying to fix it with a Sak or MT or do you carry dedicated tools in the car ?
Sak's rule !
No, I have a humble tool kit of "proper" tools in the boot (trunk), but they just weren't able to solve it without the dashboard multitool ensemble coming to the rescue. I don't rely completely on multitools, and the tools in the boot have come to the rescue a few times, but this time they just weren't the right tools for the job and the multi's saved the day :)
I caved today, officially out !!
I hope I wasn't too much of a part in that >:D :D
I think that list needs updating (by one of our complusive brethren), with who's failed and who's bailed :pok: :pok: :D
Post by: SAK Guy on October 14, 2014, 05:19:49 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/Pioneer-rail_zpsfede7f3a.jpg)
Post by: arizonaranchman on October 14, 2014, 06:08:40 PM
Pioneer morning.
(http://i833.photobucket.com/albums/zz256/SAKGuy/Pioneer-rail_zpsfede7f3a.jpg)
That old, worn Pioneer is truly an icon here on this forum!
Post by: pfrsantos on October 14, 2014, 06:09:57 PM
:rant: :rant: :rant: :rant:
Post by: SAK Guy on October 14, 2014, 06:13:31 PM
Pioneer morning.
(http://i833.photobucket.com/albums/zz256/SAKGuy/Pioneer-rail_zpsfede7f3a.jpg)
That old, worn Pioneer is truly an icon here on this forum!
Thank you my friend! :salute:
Post by: Etherealicer on October 14, 2014, 06:19:32 PM
While yesterday there was no challenge, today SHTF. One of our servers broke down, so I wanted to exchange the power supply. Some of the screws have a slightly different drive (less deep) and the Midnight Manager did not grip well. I ended up destroying the drive. As a result I had to remove the drive-bay. So the MM went into the drawer, out came the Spirit.
As a result I'm now double-out and I won't continue. The combo tool on the MM, while a good backup is not good enough to be my prime Phillips.
Post by: pfrsantos on October 14, 2014, 06:26:48 PM
This won't end well...
Post by: shark_za on October 14, 2014, 07:20:52 PM
The tool density and selection for my lifestyle is superb for one layer. I will carry this quite a bit going forward.
Will be getting a Compact next weekend (the next 6 days are in Mozambique and camping with the little waiter) ; with the extra scissor layer it could be my ideal urban EDC.
Going to be a bitch not to carry that for the last week of October ;)
Worried about flying with the waiter, I hope I can check in luggage at every hop, there is a chopper bit and a small 4 seater plane in the mix. Oh well , its cheap, like $15 to replace.
Post by: Caranthanus on October 14, 2014, 08:11:04 PM
Starting to enjoy my little waiter and look forward to grabbing it in the mornings.That's true SAKnight spirit ... :D
The tool density and selection for my lifestyle is superb for one layer. I will carry this quite a bit going forward.
Will be getting a Compact next weekend (the next 6 days are in Mozambique and camping with the little waiter) ; with the extra scissor layer it could be my ideal urban EDC.
Going to be a bitch not to carry that for the last week of October ;)
Worried about flying with the waiter, I hope I can check in luggage at every hop, there is a chopper bit and a small 4 seater plane in the mix. Oh well , its cheap, like $15 to replace.
Post by: ducttapetech on October 14, 2014, 09:58:50 PM
And I got a couple of pics. Not for the weak hearted. Luckly is was not the big stuff but still.
And yes, that is my boot stomping on the blade.
I also suggest not to do that to many times.
Nate
Post by: ducttapetech on October 14, 2014, 10:11:44 PM
I caved today, officially out !!NOOOOOOOOOOO!!!! LOL!
(http://tapatalk.imageshack.com/v2/14/10/14/a3f463874b0df119013748e503ac3c78.jpg)
Good luck you guys !
Sak's rule !
Good go man. I gotta tell you, I am about to cave in. The Compact is a great SAK for light duty days. Also great for just running into town or parties and does pretty good when paired with a Mora and a Hawk when camping.
Just kinda rough for heavy duty days. Still I like the Compact. Been a good SAK.
Nate
Post by: colt 1911 on October 14, 2014, 10:18:01 PM
I caved today, officially out !!NOOOOOOOOOOO!!!! LOL!
(http://tapatalk.imageshack.com/v2/14/10/14/a3f463874b0df119013748e503ac3c78.jpg)
Good luck you guys !
Sak's rule !
Good go man. I gotta tell you, I am about to cave in. The Compact is a great SAK for light duty days. Also great for just running into town or parties and does pretty good when paired with a Mora and a Hawk when camping.
Just kinda rough for heavy duty days. Still I like the Compact. Been a good SAK.
Nate
So happy now, I took the wave out today, thought it would be fitting , it is my first MT since I join this enabling bunch.
Sak's rule !
Post by: colt 1911 on October 14, 2014, 10:19:38 PM
Been rather busy and made tons of trips back and forth to shop at work and at the farm. One job, I was NOT going back again. All I had was my Compact to cut some solid copper wire.
And I got a couple of pics. Not for the weak hearted. Luckly is was not the big stuff but still.
And yes, that is my boot stomping on the blade.
I also suggest not to do that to many times.
Nate
I can't watch .... :)
Sak's rule !
Post by: Monrogue on October 14, 2014, 10:27:39 PM
Post by: hiraethus on October 14, 2014, 10:47:10 PM
Post by: Monrogue on October 15, 2014, 04:28:06 AM
Post by: pfrsantos on October 15, 2014, 01:25:43 PM
Post by: SAK Guy on October 15, 2014, 03:10:31 PM
Post by: magentus on October 15, 2014, 04:08:39 PM
(http://i923.photobucket.com/albums/ad80/magentus2112/WP_20141015_004_zps2445ed1f.jpg) (http://s923.photobucket.com/user/magentus2112/media/WP_20141015_004_zps2445ed1f.jpg.html)
Post by: Hyatt181 on October 15, 2014, 06:43:50 PM
Had to resort to my tool box for a pair.
Sent from my iPhone using Tapatalk
Post by: Etherealicer on October 15, 2014, 07:34:28 PM
So, I've decided not to give up and continue. However, I added the Victorinox Bit holder with a PH1 bit.
(http://forum.multitool.org/index.php?action=dlattach;topic=54888.0;attach=132092;image)
Post by: gustophersmob on October 16, 2014, 02:04:54 AM
I was gone for 2 days and everyones dropping like flies.. :ahhh
Good on Etherealicer on sticking with it, even though a bit modified :tu:
Post by: getahl on October 16, 2014, 02:05:37 AM
Day 15, didn't do a blessed thing.
Post by: kirk13 on October 16, 2014, 09:42:33 AM
Post by: AimlessWanderer on October 16, 2014, 09:52:38 AM
Post by: pfrsantos on October 16, 2014, 11:02:46 AM
Used the tweezers from the J10 to remove lint build up from the drive axel of a mini RC skateboard....beat that for a weird use!
Did you forget where you are?! Do you real want to release the Kraken?!...
:rofl: :rofl:
Post by: enki_ck on October 16, 2014, 12:47:12 PM
I know I could probably last till the end of the month but don't want to anymore. My other tools are giving me sad looks and begging me to carry them.
Truthfully this has been a bit strange, like listening to the world cup games on the radio (sport of your choosing) while you have your big screen TV in the room, turned off. :facepalm:
Good luck to all of you but I'm returning to my Syph007 Urban Pioneers PhD and LM Mini. :P
Post by: pfrsantos on October 16, 2014, 12:50:03 PM
I'm out. :-\
I know I could probably last till the end of the month but don't want to anymore. My other tools are giving me sad looks and begging me to carry them.
Truthfully this has been a bit strange, like listening to the world cup games on the radio (sport of your choosing) while you have your big screen TV in the room, turned off. :facepalm:
Good luck to all of you but I'm returning to my Syph007 Urban Pioneers PhD and LM Mini. :P
If I had one of those, I don't think I'd even entered this MAD challenge...
:salute:
Post by: derekmac on October 16, 2014, 12:53:22 PM
Post by: magentus on October 16, 2014, 01:05:25 PM
Post by: Etherealicer on October 16, 2014, 01:09:05 PM
Post by: pfrsantos on October 16, 2014, 01:13:36 PM
Post by: hiraethus on October 16, 2014, 01:45:52 PM
Post by: magentus on October 16, 2014, 01:50:54 PM
I'm still in. I will confess to the occasional fondle of my other tools though, in particular my black Climber plus and my Spirit. :-[ Turns out I really miss scissors, nail file, a proper phillips driver and pliers.
Yup - scissors, in-line philips, even the mag glass! Plus my SI doesn't have T&T so I miss them as well!
Post by: eddie1115 on October 16, 2014, 02:37:28 PM
Post by: Hyatt181 on October 16, 2014, 02:58:51 PM
Sent from my iPhone using Tapatalk
Post by: SAK Guy on October 16, 2014, 03:12:26 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/PioneerTable_zps86419d05.jpg)
Post by: Monrogue on October 16, 2014, 03:16:53 PM
I guess, if I had been smart, I would have steered clear of this challenge as it caused me to buy another SAK. I was more than happy with my Rogueneer, and now I'm questioning just how badly I need all its implements. This is also making me want another custom based on the Compact (which is what my Yeochamp started from). I would want to add only one layer to keep it slim for lighter carry, and it's between the metal file and mag/phillips layer.
I like the mag/phillips layer, especially for the possibility of using the magnifier, but I honestly rarely use that (this could change with age though ;)), or the phillips for that matter. I've also found that the combo opener tool's tip on the Compact can function as a phillips, so that makes the mag/phillips layer even less necessary. This also reduces the need for the separate opener layer, as the can opener's tip acts as a phillips as well. I rarely use them for anything actually, but I like the idea of their versatility. I do rather like the metal file as it's great for poking/prodding/light prying and just seems like a versatile tool in comparison to the mag/phillips.
The only issue I really have with the Compact, or a custom based on it, is the lack of the small secondary blade. I don't like using the main blade for cutting tape to open boxes, packages, etc. as it's a dirty job that gets adhesive all over the blade. I prefer that for the little one, plus it's more precise for these tasks, which is a plus. I prefer to keep the main blade clean and sharp for things like food if needed, and let the little one handle the dirty work.
So yeah, sorry for the unexpectedly long babble session there :whistle:
Post by: ducttapetech on October 16, 2014, 03:47:25 PM
And when I fail, it is epic! Not only did I grab my Surge, I grabbed my Mini Mag Pro and my SOG Vulcan and rocked that smurf for the rest of the day. I was looking for stuff to cut and fix. Some of didn't even needed fixed or cut, but I did it anyways damn it. And it felt good!
So today, I am back to the Compact and Solitaire. Hopefully I got that out of my system for the rest of the month.
Nate
Post by: eddie1115 on October 16, 2014, 03:52:32 PM
Post by: ducttapetech on October 16, 2014, 04:06:42 PM
Nate
Post by: derekmac on October 16, 2014, 04:26:34 PM
Post by: ducttapetech on October 16, 2014, 04:33:17 PM
Nate
Post by: SAK Guy on October 16, 2014, 04:40:33 PM
In a coffee emergency like you had Nate, I'd say anything goes!!
+1! I recall a time that I was so desperate I nearly stopped at a Starbucks! :o :D
Post by: ducttapetech on October 16, 2014, 04:42:47 PM
Damn!!!In a coffee emergency like you had Nate, I'd say anything goes!!
+1! I recall a time that I was so desperate I nearly stopped at a Starbucks! :o :D
;D
Nate
Post by: derekmac on October 16, 2014, 04:42:51 PM
You might of even ordered a Grande, Quad, Nonfat, One-Pump, No-Whip, Mocha! :ahhhIn a coffee emergency like you had Nate, I'd say anything goes!!
+1! I recall a time that I was so desperate I nearly stopped at a Starbucks! :o :D
Post by: ducttapetech on October 16, 2014, 04:46:40 PM
My GOD!! The horror!!!You might of even ordered a Grande, Quad, Nonfat, One-Pump, No-Whip, Mocha! :ahhhIn a coffee emergency like you had Nate, I'd say anything goes!!
+1! I recall a time that I was so desperate I nearly stopped at a Starbucks! :o :D
Nate
Post by: hiraethus on October 16, 2014, 04:49:35 PM
... I was with out coffee ...
:o I think that under those extenuating circumstances any tool use is acceptable and you should be allowed to continue the challenge.
Post by: SAK Guy on October 16, 2014, 04:50:21 PM
My GOD!! The horror!!!You might of even ordered a Grande, Quad, Nonfat, One-Pump, No-Whip, Mocha! :ahhhIn a coffee emergency like you had Nate, I'd say anything goes!!
+1! I recall a time that I was so desperate I nearly stopped at a Starbucks! :o :D
Nate
It's ok...I've stopped screaming now!
Post by: derekmac on October 16, 2014, 04:50:58 PM
I know, I almost fainted just thinking about it!!! (http://www.heathledgerplanet.com/forum/images/smilies/smileyfainttd2.gif)My GOD!! The horror!!!You might of even ordered a Grande, Quad, Nonfat, One-Pump, No-Whip, Mocha! :ahhhIn a coffee emergency like you had Nate, I'd say anything goes!!
+1! I recall a time that I was so desperate I nearly stopped at a Starbucks! :o :D
Nate
It's ok...I've stopped screaming now!
Post by: magentus on October 16, 2014, 04:55:29 PM
Post by: derekmac on October 16, 2014, 04:56:39 PM
It's only coffee :whistle::twak:
Post by: magentus on October 16, 2014, 04:58:06 PM
Post by: Monrogue on October 16, 2014, 04:58:36 PM
It's only coffee :whistle:
:rofl:
Post by: ducttapetech on October 16, 2014, 04:59:39 PM
C'mon, it's not like it's tea............. >:DDouble :twak:
;D
Nate
Post by: derekmac on October 16, 2014, 05:00:24 PM
C'mon, it's not like it's tea............. >:DI do quite enjoy a cuppa tea too! You still get a :twak: though!! :rofl:
Post by: kirk13 on October 16, 2014, 05:09:44 PM
Everything ends up as either:
1) :kirky:
Or
2) COFFEE
Post by: derekmac on October 16, 2014, 05:10:45 PM
I'm noticing a disturbing trend on MTo...I'm sorry. :cry:
Everything ends up as either:
1) :kirky:
Or
2) COFFEE
Post by: derekmac on October 16, 2014, 05:11:28 PM
Post by: ducttapetech on October 16, 2014, 05:11:50 PM
I have to say that I don't remember blaming anything on Kirky.
Nate
Post by: derekmac on October 16, 2014, 05:12:28 PM
I'm not....Maybe you should start? :pok:
I have to say that I don't remember blaming anything on Kirky.
Nate
Post by: ducttapetech on October 16, 2014, 05:15:21 PM
It crossed my mind, but I figure atleast one person here should have his corner. ;DI'm not....Maybe you should start? :pok:
I have to say that I don't remember blaming anything on Kirky.
Nate
Nate
Post by: AimlessWanderer on October 16, 2014, 05:23:52 PM
It crossed my mind, but I figure atleast one person here should have his corner. ;DI'm not....Maybe you should start? :pok:
I have to say that I don't remember blaming anything on Kirky.
Nate
Nate
But just ask yourself .... why did you have the coffee crisis in the first place? Who broke it? ;)
Post by: SAK Guy on October 16, 2014, 05:32:14 PM
I'm noticing a disturbing trend on MTo...
Everything ends up as either:
1) :kirky:
Or
2) COFFEE
We're simple folk..... :D
Post by: magentus on October 16, 2014, 06:07:04 PM
Post by: colt 1911 on October 16, 2014, 06:31:39 PM
Forgive me, for I have failed. I had to use the Surge yesterday after work. Yes I could have ran to the shop and grabbed some pliers and a phillips, but I had a weak moment and said smurf it. But in my defence, I had a coffee pot down (needed new cord) and I was with out coffee. Now I have been shot at, charged by Holstein Bulls, kicked by horses, bitten by dogs, found a dead body, stomped by cows, fell through a shed roof, watch one of my tractors go up in flames, but going without coffee. NOT! GONNA! HAPPEN!
And when I fail, it is epic! Not only did I grab my Surge, I grabbed my Mini Mag Pro and my SOG Vulcan and rocked that smurf for the rest of the day. I was looking for stuff to cut and fix. Some of didn't even needed fixed or cut, but I did it anyways damn it. And it felt good!
So today, I am back to the Compact and Solitaire. Hopefully I got that out of my system for the rest of the month.
Nate
You lasted a long time !
Sak's rule !
Post by: shark_za on October 16, 2014, 07:30:52 PM
Post by: Grass on October 17, 2014, 10:27:42 AM
Needed something bigger; stronger; naturally reached for the One Handed Trekker NS; and it's all oooooover :(
Post by: gustophersmob on October 17, 2014, 12:57:23 PM
Ok, so slight rule edit. All bets are off when caffiene is on the line ;)
At any rate, I'm still in, though nothing exciting to report.
Post by: ducttapetech on October 17, 2014, 01:19:26 PM
Nate
Post by: kirk13 on October 17, 2014, 01:28:09 PM
Two reasons: I'm just needing more options for work tasks( stripping and rebuilding a RC controller yesterday being a case in point),and we don't have a tool box to fetch from,unless you count me!
The other reason is just as important...I'm missing the pleasure of choosing which SAK/MT/ combo to be carried,and there's just been too much bad smurf in the last week or two not to allow myself this small pleasure!
And just for the record,today is Rebar/Wenger Tradesman/iLight iO3s
Post by: kirk13 on October 17, 2014, 01:28:48 PM
I'm officially out.
Two reasons: I'm just needing more options for work tasks( stripping and rebuilding a RC controller yesterday being a case in point),and we don't have a tool box to fetch from,unless you count me!
The other reason is just as important...I'm missing the pleasure of choosing which SAK/MT/ combo to be carried,and there's just been too much bad smurf in the last week or two not to allow myself this small pleasure!
And just for the record,today is Rebar/Wenger Tradesman/iLight iO3s
...and a Subcom 42
Post by: pfrsantos on October 17, 2014, 01:42:14 PM
I'm officially out.
Two reasons: I'm just needing more options for work tasks( stripping and rebuilding a RC controller yesterday being a case in point),and we don't have a tool box to fetch from,unless you count me!
The other reason is just as important...I'm missing the pleasure of choosing which SAK/MT/ combo to be carried,and there's just been too much bad smurf in the last week or two not to allow myself this small pleasure!
And just for the record,today is Rebar/Wenger Tradesman/iLight iO3s
...and a Subcom 42
Well, you got noone to blame but yourself! Wait, what?... Nevermind...
:facepalm:
Post by: AimlessWanderer on October 17, 2014, 01:43:47 PM
I'm officially out.
Two reasons: I'm just needing more options for work tasks( stripping and rebuilding a RC controller yesterday being a case in point),and we don't have a tool box to fetch from,unless you count me!
The other reason is just as important...I'm missing the pleasure of choosing which SAK/MT/ combo to be carried,and there's just been too much bad smurf in the last week or two not to allow myself this small pleasure!
And just for the record,today is Rebar/Wenger Tradesman/iLight iO3s
Congratulations on your emancipation John :drink: :D :D
Post by: magentus on October 17, 2014, 02:21:38 PM
I have to say, without scissors and a toothpick I'm looking a bit of a mess at the moment. I didn't appreciate how unruly eyebrows and nosehair can get in 17 days!!!!!!
I should have at least chosen my Recruit with it's oh so sweet T&T. Oh well, if wishes were fishes etc.....
Post by: kirk13 on October 17, 2014, 03:40:20 PM
I'm officially out.
Two reasons: I'm just needing more options for work tasks( stripping and rebuilding a RC controller yesterday being a case in point),and we don't have a tool box to fetch from,unless you count me!
The other reason is just as important...I'm missing the pleasure of choosing which SAK/MT/ combo to be carried,and there's just been too much bad smurf in the last week or two not to allow myself this small pleasure!
And just for the record,today is Rebar/Wenger Tradesman/iLight iO3s
Congratulations on your emancipation John :drink: :D :D
:cheers: Cheers Al! I can't begin to say how much better it feels to be fully kitted out again!
Mind you,only thing I've needed today has been the Subcom :facepalm:
Post by: Gareth on October 17, 2014, 08:21:05 PM
I do have to admit to a couple of fails though; first up was the need to turn on and off a tap that doesn't have a handle, so needed a pair of pliers to grab the spindle, my Sidekick was the first that came to hand. Secondly I had a couple of small Phillips screws that needed putting in to build up a steam mop, on of them being quite recessed, a dedicated screwdriver came out for that job. Other than that my Golfer has coped well.
So far the Fenix E01 has done all my lighting tasks, though as I noted earlier in the month there was one night I really wished I'd had something brighter.
I do want to say this though I MISS NOT BEING ABLE TO PICK AND CHOSE EVERY COUPLE OF DAYS!!! :rant:
ahh, that's better. :angel:
Post by: tylosaurus on October 17, 2014, 11:09:49 PM
Post by: kirk13 on October 17, 2014, 11:22:23 PM
I guess I don't use as much knife as I normally carry. The small tinker is working so far. Used it to help unpackage a nerf gun yesterday.
Which one :pok:
Post by: Etherealicer on October 17, 2014, 11:43:33 PM
No challenge, only some food preparation...
Post by: Caranthanus on October 17, 2014, 11:58:43 PM
They're dropping like flies!:D
I have to say, without scissors and a toothpick I'm looking a bit of a mess at the moment. I didn't appreciate how unruly eyebrows and nosehair can get in 17 days!!!!!!
I should have at least chosen my Recruit with it's oh so sweet T&T. Oh well, if wishes were fishes etc.....
SI/Soldier or the Pioneer series are great tools, but they need a companion, because T&T are such useful tools, as you already know now ;) at least a Classic. For that very reason, if the option is only one essential model, I would always choose a Spartan, Sportsman ... Wenger s10 :D
(http://s28.postimg.org/l72lzh0ql/image.jpg)
:cheers:
Post by: powernoodle on October 18, 2014, 01:07:39 AM
I MISS NOT BEING ABLE TO PICK AND CHOSE EVERY COUPLE OF DAYS!
For me that's the worst part too. I can deal perfectly fine with nothing but my Executive from a utility perspective, but the picking and choosing is the fun part.
Post by: SAK Guy on October 18, 2014, 01:29:48 AM
They're dropping like flies!:D
I have to say, without scissors and a toothpick I'm looking a bit of a mess at the moment. I didn't appreciate how unruly eyebrows and nosehair can get in 17 days!!!!!!
I should have at least chosen my Recruit with it's oh so sweet T&T. Oh well, if wishes were fishes etc.....
SI/Soldier or the Pioneer series are great tools, but they need a companion, because T&T are such useful tools, as you already know now ;) at least a Classic. For that very reason, if the option is only one essential model, I would always choose a Spartan, Sportsman ... Wenger s10 :D
(http://s28.postimg.org/l72lzh0ql/image.jpg)
:cheers:
Great looking knife!! :salute:
Post by: SAK Guy on October 18, 2014, 03:12:35 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/SunrisePioneer_zpsa86deed9.jpg)
Post by: ducttapetech on October 18, 2014, 05:11:52 PM
Post by: SAK Guy on October 18, 2014, 05:52:51 PM
Cool pic!
Thx Nate!!!
Post by: SAK Guy on October 18, 2014, 06:23:26 PM
Post by: Singh on October 18, 2014, 06:53:42 PM
.. I had a coffee pot down (needed new cord) and I was with out coffee.
Get yourself a Chemex, son. You'll never look back. ;)
(http://i1199.photobucket.com/albums/aa466/sx975/chhmx_zpscf2fe913.jpg)
Post by: arizonaranchman on October 18, 2014, 07:37:50 PM
Yet another gorgeous Fall morning... Stacking firewood again today - the trusty Pioneer always at the ready :)
Post by: SAK Guy on October 18, 2014, 08:09:32 PM
Post by: arizonaranchman on October 18, 2014, 09:14:58 PM
(http://i1145.photobucket.com/albums/o501/alpineharleydavidson/Pioneer%20SAK%209-12-14/E44724B3-C530-4EAB-BE0C-E4AF4EA228E4_zps34gtbosr.jpg)
Post by: Caranthanus on October 18, 2014, 11:21:46 PM
(http://s30.postimg.org/iyfc23tox/image.jpg)
Post by: powernoodle on October 18, 2014, 11:31:00 PM
But I did order a black Wenger Evo 16 to make myself feel better. I just won't be able to use it for a few more days.
Post by: Etherealicer on October 18, 2014, 11:59:47 PM
I failed again. Wanted to open a early Christmas present and grabbed my nice Böker Knife, suddenly my GF asks me if I'm not on the Challenge anymore, I had completely forgotten :facepalm:
Post by: Caranthanus on October 19, 2014, 12:04:05 AM
Great looking knife!! :salute::cheers:
... and useful too :D I really like it, I like its blade, then locking mechanism on such a small knife ... after all it's a SAK :angel: For sure the small-driver and pin are somehow missed, when it comes in play, but a SAKnight must be able to improvise >:D
Post by: arizonaranchman on October 19, 2014, 04:03:03 AM
I'm learning that what I miss the most when carrying only the Executive is the standard flat driver/bottle opener. More than a few times I have had to go find something with which to do light prying on a paint can lid, the plastic nut during a vehicle license plate installation, etc. I think a better minimalist challenge for me, though not really that much of a challenge, would have been a Compact so I would retain the flat driver.
But I did order a black Wenger Evo 16 to make myself feel better. I just won't be able to use it for a few more days.
I use the heck out of the screwdriver/cap lifter on my Pioneer - easily as much or more than the blade itself.
______________________________
Day 18 was a quiet one here, college football games and tinkering around the house. I made a concoction with hotlinks and jumbalaya rice, etc and the Pioneer handled all the food prep with ease, opening packages, slicing/dicing the hotlinks, etc. :tu:
Post by: Monrogue on October 19, 2014, 05:37:16 AM
Post by: SAK Guy on October 19, 2014, 05:23:09 PM
Post by: Caranthanus on October 19, 2014, 10:33:22 PM
We'll fight till the end ... :facepalm:
Post by: SAKchief on October 20, 2014, 05:29:50 AM
I've pretty much given up on using the manager accept for light duty applications
I'm using dedicated tools in most instance...
should have gone with the compact, electrician or small tinker
Post by: ducttapetech on October 20, 2014, 02:17:35 PM
Nate
Post by: SAK Guy on October 20, 2014, 03:55:23 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/FoggyPioneer_zps86f97fef.jpg)
Post by: coSAK on October 20, 2014, 04:27:08 PM
Pioneer again....
(http://i833.photobucket.com/albums/zz256/SAKGuy/FoggyPioneer_zps86f97fef.jpg)
Hang ’Em High >:D
Post by: ducttapetech on October 20, 2014, 04:42:49 PM
Nate
Post by: SAK Guy on October 20, 2014, 04:56:48 PM
Post by: Caranthanus on October 21, 2014, 12:36:33 AM
(http://s28.postimg.org/e63q8rd71/image.jpg)
Post by: derekmac on October 21, 2014, 12:43:11 AM
Post by: getahl on October 21, 2014, 04:02:49 AM
Post by: arizonaranchman on October 21, 2014, 04:37:11 AM
Post by: Higgins617 on October 21, 2014, 07:32:47 AM
Post by: shark_za on October 21, 2014, 07:52:06 AM
Whittled a forked catapult shaped stick to chase the monkeys.
All that is getting to me is the other SAK's just sitting there, even other minimalists like Spartan, Soldier, Evo10, Bantam, Recruit etc.
Really getting to know and like the Waiter after 21 days and it will remain a favorite after 11 days are gone.
But not 100% exclusive.
Post by: zoidberg on October 21, 2014, 07:53:32 AM
Post by: ducttapetech on October 21, 2014, 11:24:28 AM
Light day for the Compact yesterday. Used the blade to cut up some boxes, a couple pieces of twine and open some bills that came in the mail. Used the combo tool to turn a couple of screws here and there.
Also used the scissors to cut my fingernails.
Nate
Post by: pfrsantos on October 21, 2014, 02:40:31 PM
I'm going mad(der) not being able to get other
:ahhh :ahhh :ahhh :ahhh
Post by: Etherealicer on October 21, 2014, 02:58:35 PM
Yesterday, there was nothing...
Today, nothing... But tonight I get to play with a XXXXXL Blade >:D
Post by: SAK Guy on October 21, 2014, 03:36:57 PM
Post by: kirk13 on October 21, 2014, 09:49:17 PM
Sometimes it pays to be a quitter >:D
(http://i782.photobucket.com/albums/yy104/kirk130013/imagejpg1_zps97acc15e.jpg) (http://s782.photobucket.com/user/kirk130013/media/imagejpg1_zps97acc15e.jpg.html)
Post by: Hyatt181 on October 21, 2014, 10:23:38 PM
Sent from my iPhone using Tapatalk
Post by: Caranthanus on October 21, 2014, 10:26:02 PM
(http://s8.postimg.org/4cttufzg5/image.jpg)
Post by: magentus on October 21, 2014, 10:37:35 PM
I'm looking forward to getting it back to work tomorrow, on day 22.
Well done Swiss Army Knights and 'Courage mes Braves'
(excuse my poor French everyone)
:salute:
Post by: Hyatt181 on October 22, 2014, 12:23:25 AM
My normal edc would have had a fisher space pen.
Oh well managed to get everything I needed.
Sent from my iPhone using Tapatalk
Post by: mrynnr on October 22, 2014, 12:58:24 AM
Post by: pfrsantos on October 22, 2014, 01:31:35 PM
I know it's close but I'm out. I want to carry something different.
(http://www.troll.me/images/empathetic-shark/dont-give-up-i-love-and-believe-in-you-more-and-more-thumb.jpg)
(http://media-cache-ec0.pinimg.com/736x/e0/bf/99/e0bf9914a58043ceb850e2ac725bd367.jpg)
Post by: pfrsantos on October 22, 2014, 01:35:23 PM
(https://sp.yimg.com/ib/th?id=HN.608026004893863149&pid=15.1&P=0)
:D :D
Post by: Caranthanus on October 22, 2014, 09:29:53 PM
(http://media-cache-ec0.pinimg.com/736x/e0/bf/99/e0bf9914a58043ceb850e2ac725bd367.jpg)+1 :salute:
Post by: gustophersmob on October 22, 2014, 09:35:49 PM
Post by: Etherealicer on October 22, 2014, 09:36:18 PM
Today, was different, didn't use any tool and therefore didn't fail ::)
Post by: SAK Guy on October 22, 2014, 11:20:08 PM
Post by: ducttapetech on October 23, 2014, 01:45:11 AM
Now I don't carry a waterline patch kit everywhere I go. It just so happen the that the spare parts room was right across the hall from where the leak was at. Problem was, the shop was on the first floor in another building. Sigh. Good thing was it was a small leak and this waterline had a shut off with a handle on it.
Now the compact did do a good job cutting the ceiling tiles and the insulation of the pipes. It did dull the blade somewhat, but I was able to get it back to good cutting order in no time.
Also used the hook for some lashings. Hook FTW!
After work on the farm, nothing to much. Just opened a can of Pork n' Beans to go with dinner.
Nate
Post by: getahl on October 23, 2014, 05:39:51 AM
Post by: pfrsantos on October 23, 2014, 02:01:21 PM
Cracking pecans!!! :D
So, basically just busting your nuts...
:whistle: :D :D :D :D
Post by: SAK Guy on October 23, 2014, 02:03:56 PM
Cracking pecans!!! :D
So, basically just busting your nuts...
:whistle: :D :D :D :D
:D
Post by: ducttapetech on October 23, 2014, 03:04:32 PM
Nate
Post by: SAK Guy on October 23, 2014, 03:43:10 PM
Sounds like a banned Cornnut ad.
Nate
Mmmmm, Cornnuts! Haven't had any in 5+ years...
Thanks Nate!
Knife content....
Pioneer again today!
Post by: ducttapetech on October 23, 2014, 04:18:14 PM
Mmmmmm
Nate
Post by: SAK Guy on October 23, 2014, 04:28:05 PM
Nice pic! Gonna have to grab a bag of cornnuts now.
Mmmmmm
Nate
Thanks and :ahhh :gimme:
Post by: Etherealicer on October 23, 2014, 10:19:10 PM
No failure today :woohoo:
Post by: jerseydevil on October 23, 2014, 11:40:43 PM
Post by: zoidberg on October 24, 2014, 02:20:32 AM
Post by: getahl on October 24, 2014, 05:03:22 AM
Post by: HarleyXJGuy on October 24, 2014, 06:46:21 AM
Hope this happens again at some point after my Compact gets here.
Good job to all of those who were able to stick with it. Soon enough you will be back to this :climber:
Post by: ducttapetech on October 24, 2014, 11:31:10 AM
Nate
Post by: Gareth on October 24, 2014, 11:35:59 AM
Post by: pfrsantos on October 24, 2014, 11:52:34 AM
Though I'm not participating in the challenge, I've been going pretty minimalist lately. Over the past two weeks, the SAKs I've used the most have been my Rambler and Minichamp. I'm slowly realizing just how capable these little suckers are. The keychain SAK is always just kind of there for me, but lately I've made a conscious effort to use it, and have had absolutely no problems with tasks around the house or out and about. :tu:
That's one of the good things with this kind of challenge: you find new ways of solving problems with less tools. It helps you think out of the box. If/when you find yourself in a situation where you don't have exactly what you need, this enances your MacGyveriness and allows you to overcome difficulties more easily.
Wow, I'm really deep and profound... Must be the coffee I just had...
Post by: ducttapetech on October 24, 2014, 12:05:29 PM
Go ahead and grab another cup.
Nate
Post by: pfrsantos on October 24, 2014, 12:27:09 PM
There is some truth to it, but mainly its the coffee.
Go ahead and grab another cup.
Nate
(http://www.mememaker.net/static/images/memes/544038.jpg)
31 un-derailed pages of posts.
(https://sp.yimg.com/ib/th?id=HN.607989076761313762&pid=15.1&P=0)
Post by: ducttapetech on October 24, 2014, 12:39:41 PM
Nate
Post by: ducttapetech on October 24, 2014, 02:44:02 PM
GAH!!!
First time I ever had this happen.
Post by: magentus on October 24, 2014, 02:55:17 PM
Be honest now, you're among friends.......
Post by: ducttapetech on October 24, 2014, 03:02:03 PM
It fell from a latter. I was opening the blade with one hand and dropped it. Didn't help that my hands where wet and greasy. On a good note, I did get the blade open, but I lost it at that final snap.
Nate
Post by: SAK Guy on October 24, 2014, 03:09:17 PM
Lol!
It fell from a latter. I was opening the blade with one hand and dropped it. Didn't help that my hands where wet and greasy. On a good note, I did get the blade open, but I lost it at that final snap.
Nate
Just glad it was the knife and not you that fell! :tu:
Post by: ducttapetech on October 24, 2014, 03:13:21 PM
Tried to glue the scale back on. No go. The rings have snaped and broken and the scale has a crack it in and part of the slot for the toothpick is busted.
Gonna try to get some scales for it when payday hits.
Nate
Post by: magentus on October 24, 2014, 03:18:28 PM
Post by: ducttapetech on October 24, 2014, 03:22:02 PM
Nate
Post by: magentus on October 24, 2014, 03:24:39 PM
I realise I've been reading your username as Duct Tape Pete :facepalm:
I sense another thread derailing - It's Friday afternoon!
Post by: ducttapetech on October 24, 2014, 03:26:17 PM
Nate
Post by: HarleyXJGuy on October 24, 2014, 03:33:35 PM
I forget now, but one of us is using a Case knife for the Challenge. A Scout I believe.
Nate
Yeah more of a I am almost a month late I think is the issue. That and all I have are MT's and Spydercos.
Would have been super minimal challenge with just a knife, even if it is one of my favorites.
(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Milliecoke.jpg~original)
Spyderco Military goodness.
Post by: Monrogue on October 24, 2014, 04:16:17 PM
It's been fairly uneventful since last Saturday for me, other than the normal tasks like cutting open boxes/packages, and some whisker trimming. Heck, if I didn't have a beard going, I would lose a lot of my need for the scissors I think...maybe 50% :think: Still want them though.
Post by: magentus on October 24, 2014, 04:23:59 PM
6 days and counting!
Post by: AimlessWanderer on October 24, 2014, 05:10:17 PM
I forget now, but one of us is using a Case knife for the Challenge. A Scout I believe.
Nate
That was me Nate :waving: - Case Scout Jr, but I bailed out LONG ago :D Good little knife, but the whole minimalist approach was just not viable
Post by: powernoodle on October 24, 2014, 05:22:59 PM
Post by: ducttapetech on October 24, 2014, 05:43:12 PM
I hear ya! While I have enjoyed this and cursed the challenge, it is not for me at all. But I do see the Compact getting some pocket time down the road. It is nice for light days. Pretty good for camping too. Providing I have my other tools for camping and bushcrafting.I forget now, but one of us is using a Case knife for the Challenge. A Scout I believe.
Nate
That was me Nate :waving: - Case Scout Jr, but I bailed out LONG ago :D Good little knife, but the whole minimalist approach was just not viable
Nate
Post by: ducttapetech on October 24, 2014, 08:25:40 PM
I gonna set it up to hard core mode. LOL! It is still a two layer knife.
Case Muskrat
Nate
Post by: Higgins617 on October 24, 2014, 08:29:37 PM
Alright, I am putting an new entry in for the challenge since my Compact is out of action til I get some scales.
I gonna set it up to hard core mode. LOL! It is still a two layer knife.
Case Muskrat
Nate
But it's so prettyyyyyy :o
Post by: Etherealicer on October 24, 2014, 08:46:10 PM
Lots of package opening but nothing to challenge my Midnight Manager.
Post by: AimlessWanderer on October 24, 2014, 08:47:14 PM
Alright, I am putting an new entry in for the challenge since my Compact is out of action til I get some scales.
I gonna set it up to hard core mode. LOL! It is still a two layer knife.
Case Muskrat
Nate
Nice looking knife, Nate :tu:
Post by: eddie1115 on October 24, 2014, 08:55:49 PM
Alright, I am putting an new entry in for the challenge since my Compact is out of action til I get some scales.
I gonna set it up to hard core mode. LOL! It is still a two layer knife.
Case Muskrat
Nate
Nice looking knife, Nate :tu:
+1 I need to add another Case or two to my collection (of 1 knife :facepalm: )
I haven't had too many updates in this thread, because it's been much of the same. Tourist is able to open mail/packages, occasional light pry job or flathead screw. But I've had to keep dedicated pliers, scissors, and bit drivers in various rooms of the house (and the back of my Jeep) to keep up with little daily chores and prepare for what ifs.
For me, this really hasn't been too much of a struggle (I work an IT job from home), but I have missed the fun of picking and choosing what I want to carry. I have a feeling November will bring a lot of SwissChamp/Super Tool combo days, just because :D
Post by: Caranthanus on October 24, 2014, 09:37:02 PM
And there is one less worry, which SAK to choose :facepalm:
Post by: Monrogue on October 24, 2014, 10:23:48 PM
Leaving aside some concern that couldn't perform some task, not having all tools available, have to say that such a challenge it's very stimulating ... >:D
And there is one less worry, which SAK to choose :facepalm:
You have a good point there in that this challenge has the potential for some of us to have to think outside the box and use what we have available. I haven't really had to do that much at all though, which isn't a surprise to me. Oh, and before this challenge, I didn't have to worry about which SAK to carry....it was the Rogueneer :pok: ;)
Post by: derekmac on October 24, 2014, 10:45:19 PM
Sent from my iPad using Tapatalk
Post by: ducttapetech on October 24, 2014, 11:10:28 PM
Yes it is and its a user. I tend to carry it with my Surge so I can have a couple smaller blades.Alright, I am putting an new entry in for the challenge since my Compact is out of action til I get some scales.
I gonna set it up to hard core mode. LOL! It is still a two layer knife.
Case Muskrat
Nate
But it's so prettyyyyyy :o
Nate
Post by: ducttapetech on October 24, 2014, 11:13:29 PM
Thanks guys!Alright, I am putting an new entry in for the challenge since my Compact is out of action til I get some scales.
I gonna set it up to hard core mode. LOL! It is still a two layer knife.
Case Muskrat
Nate
Nice looking knife, Nate :tu:
+1 I need to add another Case or two to my collection (of 1 knife :facepalm: )
Nate
Post by: getahl on October 25, 2014, 01:22:19 AM
Post by: gustophersmob on October 25, 2014, 01:31:38 AM
Alright, I am putting an new entry in for the challenge since my Compact is out of action til I get some scales.
I gonna set it up to hard core mode. LOL! It is still a two layer knife.
Case Muskrat
Nate
Nice looking knife, Nate :tu:
+1 I need to add another Case or two to my collection (of 1 knife :facepalm: )
I haven't had too many updates in this thread, because it's been much of the same. Tourist is able to open mail/packages, occasional light pry job or flathead screw. But I've had to keep dedicated pliers, scissors, and bit drivers in various rooms of the house (and the back of my Jeep) to keep up with little daily chores and prepare for what ifs.
For me, this really hasn't been too much of a struggle (I work an IT job from home), but I have missed the fun of picking and choosing what I want to carry. I have a feeling November will bring a lot of SwissChamp/Super Tool combo days, just because :D
+2, that is a very nice looking knife :drool: It'll be interesting to see how you get by with no tools, though.
I'm also in a similar boat as eddie. I'm typically pretty minimal any way, EDCing a Pioneer, so the Bantam really isn't much of a challenge. I do miss options, and alox. They keep tempting me to the dark side....
Post by: eddie1115 on October 25, 2014, 01:58:11 AM
Post by: zoidberg on October 25, 2014, 02:02:22 AM
Awesome photo!
+1 :drool: :drool: :drool:
Post by: SAK Guy on October 25, 2014, 02:38:08 AM
Post by: Monrogue on October 25, 2014, 03:28:09 AM
I'm not even sure if I'll carry an MT when this is over. :think: I know I don't need much out of one, so I might just carry a PST.
Sent from my iPad using Tapatalk
I could probably do the same really....a PST is probably sufficient, especially considering I only really need pliers sometimes. Although if I were carrying my Compact or Pioneer, I'd carry a more loaded MT. With the Rogueneer though, I wouldn't need as robust of an MT. Who are we kidding though? You'll be carrying your Charge or MUT or Swisstool (I think you have one right?) and I'll be carrying any of mine ;)
Post by: derekmac on October 25, 2014, 01:45:23 PM
You are probably right. :facepalm: I think my OC red Pioneer will stay as my primary SAK though, but I might (probably) will rotate through my MT's. I do have a SwissTool, which is a fantastic carry. God I love that MT. :dd:I'm not even sure if I'll carry an MT when this is over. :think: I know I don't need much out of one, so I might just carry a PST.
Sent from my iPad using Tapatalk
I could probably do the same really....a PST is probably sufficient, especially considering I only really need pliers sometimes. Although if I were carrying my Compact or Pioneer, I'd carry a more loaded MT. With the Rogueneer though, I wouldn't need as robust of an MT. Who are we kidding though? You'll be carrying your Charge or MUT or Swisstool (I think you have one right?) and I'll be carrying any of mine ;)
Post by: ducttapetech on October 25, 2014, 01:57:01 PM
Nate
Post by: zoidberg on October 25, 2014, 02:06:49 PM
Because of the Challenge, I will never, ever, ever give up my large SAKs and Multis again. This challenge showed my just how many times I really use my bigger tools without thinking and just how handy they really are.
Nate
:pok: Never say never. :rofl:
Post by: SAK Guy on October 25, 2014, 02:14:25 PM
:sa: I just got a chill!!!
:climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :gimme:
Post by: gustophersmob on October 25, 2014, 03:14:01 PM
Awesome photo!
+1 :drool: :drool: :drool:
Thanks guys! :salute:
Post by: shark_za on October 25, 2014, 03:53:10 PM
But this last Wednesday of the month I will swap to the very similarly equipped Wenger Evogrip Blackout 63.
Had a close call this morning, I had to change the batteries in my kids toothbrush, the combo was way too big but the screwdriver in the corkscrew worked when pushed in hard. That is an "aftermarket" addition to the waiter but allowed I think.
Post by: coSAK on October 25, 2014, 03:54:38 PM
Looking forward to Trail Guides, Travelers, Explorers, Climbers, Swiss Champs etc as complements to my ALOX.
:sa: I just got a chill!!!
:climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :gimme:
Thx, now I'm blind!
:facepalm: :rofl:
Post by: SAK Guy on October 25, 2014, 04:15:01 PM
Looking forward to Trail Guides, Travelers, Explorers, Climbers, Swiss Champs etc as complements to my ALOX.
:sa: I just got a chill!!!
:climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :gimme:
Thx, now I'm blind!
:facepalm: :rofl:
:rofl:
Here, focus on the.....coffee.... :D
Post by: coSAK on October 25, 2014, 05:09:24 PM
Looking forward to Trail Guides, Travelers, Explorers, Climbers, Swiss Champs etc as complements to my ALOX.
:sa: I just got a chill!!!
:climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :climber: :gimme:
Thx, now I'm blind!
:facepalm: :rofl:
:rofl:
Here, focus on the.....coffee.... :D
Well, thanks... it's getting better.
:D
Post by: Caranthanus on October 25, 2014, 08:10:50 PM
:o My fault I guess :think: I hadn't noticed Rogue was lost ... :pok: :facepalm: ;)Leaving aside some concern that couldn't perform some task, not having all tools available, have to say that such a challenge it's very stimulating ... >:D
And there is one less worry, which SAK to choose :facepalm:
You have a good point there in that this challenge has the potential for some of us to have to think outside the box and use what we have available. I haven't really had to do that much at all though, which isn't a surprise to me. Oh, and before this challenge, I didn't have to worry about which SAK to carry....it was the Rogueneer :pok: ;)
Post by: Monrogue on October 25, 2014, 10:41:43 PM
Post by: Caranthanus on October 25, 2014, 11:46:51 PM
(http://s17.postimg.org/ul3j9on0v/image.jpg)
>:D
(http://s13.postimg.org/q7it4rtjb/image.jpg)
Post by: ducttapetech on October 25, 2014, 11:55:41 PM
Nate
Post by: SAK Guy on October 26, 2014, 10:40:36 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/PecanSAK2_zpsd9bd5ae9.jpg)
Post by: getahl on October 27, 2014, 12:10:42 AM
Post by: zoidberg on October 27, 2014, 12:49:09 AM
More pecans.....Yummy. :D
(http://i833.photobucket.com/albums/zz256/SAKGuy/PecanSAK2_zpsd9bd5ae9.jpg)
Post by: eddie1115 on October 27, 2014, 01:58:51 AM
Post by: ducttapetech on October 27, 2014, 02:07:36 AM
Nate
Post by: eddie1115 on October 27, 2014, 02:10:24 AM
Hope you get to feeling better.Thanks! I bet the Royals winning tonight could help :)
Nate
Post by: Singh on October 27, 2014, 12:18:42 PM
I was doing fine until my wife needed help with an earring. I had to bring out SAK pliers to close the clasp.
this has happened before: http://forum.multitool.org/index.php/topic,51922.msg883106.html#msg883106
Post by: zoidberg on October 27, 2014, 12:27:30 PM
Post by: Hyatt181 on October 27, 2014, 12:27:53 PM
Oh well.
I'm barely hanging on. I have had to go to the garage 5 times over the past weekend to get dedicated tools that I normally would have used my cyber 34 for.
Sent from my iPhone using Tapatalk
Post by: ducttapetech on October 27, 2014, 12:38:45 PM
You were almost there shamus.I here yeah, all the trips back and forth to the shop is getting really old.
Oh well.
I'm barely hanging on. I have had to go to the garage 5 times over the past weekend to get dedicated tools that I normally would have used my cyber 34 for.
Sent from my iPhone using Tapatalk
Still, been having some fun with it. And the use of some swear words. ;D
Nate
Post by: Etherealicer on October 27, 2014, 01:36:27 PM
So far, no more failures but I miss my CyberTool :P
Post by: shark_za on October 27, 2014, 02:07:38 PM
She thought I need to see something different, she is 5 and I don't argue.
Post by: Monrogue on October 27, 2014, 02:13:38 PM
Post by: SAK Guy on October 27, 2014, 03:43:12 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/ImreadyImready_zps3ebf13bc.jpg)
Wait a minute....I ain't that ready. :ahhh
(http://i833.photobucket.com/albums/zz256/SAKGuy/Waitaminute_zps879c3ac0.jpg)
Gads! I have to rethink this Spongebob Necker idea...... :facepalm:
Post by: derekmac on October 27, 2014, 03:49:54 PM
Gads! I have to rethink this Spongebob Necker idea...... :facepalm:Yes, yes you are. :pok: :rofl:
Great pics though! :tu:
Post by: Monrogue on October 27, 2014, 03:50:32 PM
Post by: ducttapetech on October 27, 2014, 03:51:58 PM
Nate
Post by: coSAK on October 27, 2014, 04:54:31 PM
Post by: pfrsantos on October 27, 2014, 05:32:19 PM
:tu: :tu:
Post by: SAK Guy on October 28, 2014, 01:04:09 AM
Post by: ducttapetech on October 28, 2014, 01:33:05 AM
Post by: SAK Guy on October 28, 2014, 01:59:51 AM
Used the Case Muskrat today to break down some boxes, strip some wire and............
Muskrats rock!!!!! :tu:
Post by: getahl on October 28, 2014, 04:22:25 AM
Post by: Caranthanus on October 28, 2014, 08:38:14 PM
Post by: Monrogue on October 28, 2014, 08:46:33 PM
Three days to go :o :D
:woohoo: :whistle:
Post by: Hyatt181 on October 28, 2014, 09:10:44 PM
Sent from my iPhone using Tapatalk
Post by: SAK Guy on October 28, 2014, 09:16:47 PM
Three days to go :o :D
:woohoo: :whistle:
+1
I need scissors, file, tweezers etc....
Starting to look like the mid 70's version of this guy....
(http://wiseblooddotnet1.files.wordpress.com/2012/06/howard-hughes_thumb.jpg)
Post by: Etherealicer on October 28, 2014, 09:32:07 PM
I have to admit I got lazy. I stopped cutting my fruits (Apples, Kaki) because its too much work with that tiny blade. I didn't think much of it as it is more practical that way but in a way its like giving up.
58mm as main blade just does not cut it :P
Post by: Caranthanus on October 28, 2014, 09:56:16 PM
>:D ;)Three days to go :o :D
:woohoo: :whistle:
Post by: Caranthanus on October 28, 2014, 10:08:22 PM
For next challenge don't emulate HH :oThree days to go :o :D
:woohoo: :whistle:
+1
I need scissors, file, tweezers etc....
instead take cellidor SAK and avoid some OCD :pok: :facepalm:
;)
Post by: SAK Guy on October 28, 2014, 10:24:24 PM
For next challenge don't emulate HH :oThree days to go :o :D
:woohoo: :whistle:
+1
I need scissors, file, tweezers etc....
instead take cellidor SAK and avoid some OCD :pok: :facepalm:
;)
Wise advice...going with my old Golfer (Compact) or Sportsman next time!
Post by: Caranthanus on October 28, 2014, 10:39:33 PM
Wise advice...going with my old Golfer (Compact) or Sportsman next time!:D :cheers:
Pioneer etc. series, Soldiers & SI are outstanding tools, but they desperately need a companion, let's say The Classic ;)
Post by: magentus on October 28, 2014, 10:43:28 PM
Are we doing this to the 30th or the 31st?
Post by: coSAK on October 28, 2014, 10:57:51 PM
Are we doing this to the 30th or the 31st?
It's called "30-Day Minimalist SAK Challenge". Therefore, it must end on the 30th!
Post by: ducttapetech on October 28, 2014, 11:25:02 PM
Nate
Post by: getahl on October 28, 2014, 11:32:50 PM
Post by: SAKchief on October 29, 2014, 12:52:14 AM
Day 28
I have to admit I got lazy. I stopped cutting my fruits (Apples, Kaki) because its too much work with that tiny blade. I didn't think much of it as it is more practical that way but in a way its like giving up.
58mm as main blade just does not cut it :P
Same here...
All I use on my manager is is the pen, scissors and combo tool (for beer)
I'll be opening a few beers at the end of this challenge :drink:
Post by: HarleyXJGuy on October 29, 2014, 06:34:33 AM
:pok:
Post by: ducttapetech on October 29, 2014, 10:16:16 AM
He said 30-day Challenge, and that is what he is gonna get. Not a second more. ;D
Nate
Post by: magentus on October 29, 2014, 10:18:24 AM
Post by: hiraethus on October 29, 2014, 10:31:41 AM
(https://farm4.staticflickr.com/3933/15654635651_88ddcf7efe_z.jpg) (https://flic.kr/p/pRm6Me)
Post by: hiraethus on October 29, 2014, 10:34:23 AM
Post by: pfrsantos on October 29, 2014, 10:52:59 AM
:ahhh :ahhh :ahhh :ahhh
Post by: zoidberg on October 29, 2014, 12:19:44 PM
Less than 48hrs to go. :woohoo: A few pics from the last week.
(https://farm4.staticflickr.com/3949/14999087104_75fa9b493a.jpg) (https://flic.kr/p/oRqf35)
(https://farm4.staticflickr.com/3954/15433843667_9896d89971.jpg) (https://flic.kr/p/pvQu1T)
(https://farm6.staticflickr.com/5615/15645092921_7c81899188.jpg) (https://flic.kr/p/pQvc4p)
Post by: coSAK on October 29, 2014, 12:54:14 PM
I'm going the full 31 days......Let me fix that for ya: I'm going one over the top!
:rofl:
Only 36h for me. The Bubinga Ranger is throwing tempting eyes on me...
:facepalm:
Post by: magentus on October 29, 2014, 01:50:42 PM
Can't wait to get it back! roll on Friday!
Post by: derekmac on October 29, 2014, 02:44:38 PM
Sent from my iPad using Tapatalk
Post by: HarleyXJGuy on October 29, 2014, 03:28:18 PM
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
Post by: Monrogue on October 29, 2014, 03:50:34 PM
Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
I fold! :ahhh :ahhh
Post by: magentus on October 29, 2014, 03:56:54 PM
Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
How about another year? :pok: :pok: :pok:
Post by: ducttapetech on October 29, 2014, 04:00:42 PM
smurf That!!!Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
How about another year? :pok: :pok: :pok:
Nate
Post by: pfrsantos on October 29, 2014, 04:01:08 PM
Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
How about another year? :pok: :pok: :pok:
How about we turn this around and make a 30-day not-the-same-SAK-again challenge?
:pok: :pok: :pok: :pok:
Post by: SAK Guy on October 29, 2014, 04:02:06 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/SIRecta_zps37c5ef37.jpg)
Post by: magentus on October 29, 2014, 04:06:43 PM
Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
How about another year? :pok: :pok: :pok:
How about we turn this around and make a 30-day not-the-same-SAK-again challenge?
:pok: :pok: :pok: :pok:
What - a different SAK each day for 30 days? I wouldn't last the week!
Post by: coSAK on October 29, 2014, 04:08:24 PM
Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
Looks like we have a volunteer for an extra month single man challenge! :D
Post by: SAK Guy on October 29, 2014, 04:08:41 PM
BTW. I'm adding this Wenger SI to my EDC rotation! :tu:
Post by: ducttapetech on October 29, 2014, 04:10:52 PM
Neither could I. I could not make it two weeks with all of my tools combined.Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
How about another year? :pok: :pok: :pok:
How about we turn this around and make a 30-day not-the-same-SAK-again challenge?
:pok: :pok: :pok: :pok:
What - a different SAK each day for 30 days? I wouldn't last the week!
Nate
Post by: magentus on October 29, 2014, 04:16:46 PM
I'll keep toting my ALOX 93's (like I used to) but will add a Trail Guide/Traveler/Swiss Champ etc to them as scissors/file/pliers are needed. They are still handy as heck in a kydex necker! :2tu:
BTW. I'm adding this Wenger SI to my EDC rotation! :tu:
Nice one SAK Guy - as a fellow SI user for this month I have to say how useful it is - I can't think of a better basic pocket knife and tough as old boots. I used to like the British Army Knife as it's pretty tough too, but it's nothing like as comfortable to use as the SI. You have to admire the design and look of it. Beautiful and utilitarian at the same time.
Post by: SAK Guy on October 29, 2014, 04:23:18 PM
I'll keep toting my ALOX 93's (like I used to) but will add a Trail Guide/Traveler/Swiss Champ etc to them as scissors/file/pliers are needed. They are still handy as heck in a kydex necker! :2tu:
BTW. I'm adding this Wenger SI to my EDC rotation! :tu:
Nice one SAK Guy - as a fellow SI user for this month I have to say how useful it is - I can't think of a better basic pocket knife and tough as old boots. I used to like the British Army Knife as it's pretty tough too, but it's nothing like as comfortable to use as the SI. You have to admire the design and look of it. Beautiful and utilitarian at the same time.
Thank you and +1 on the beauty and simplicity of the design! :2tu:
Post by: magentus on October 29, 2014, 04:25:38 PM
Post by: SAK Guy on October 29, 2014, 04:35:09 PM
They come in red you know :pok:
An old red SI?
I could never afford a 60's one.... :(
Post by: HarleyXJGuy on October 29, 2014, 04:39:06 PM
Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
Looks like we have a volunteer for an extra month single man challenge! :D
Yeah if only I was part of the first challenge I would totally double down. With out a doubt. Alas I just don't think it would be right seeing how I missed the first month and all.
I really wish I could have though. To bad. :whistle:
Post by: magentus on October 29, 2014, 04:40:39 PM
They come in red you know :pok:
An old red SI?
I could never afford a 60's one.... :(
can you afford NOT to get one?
Post by: magentus on October 29, 2014, 04:41:26 PM
Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
Looks like we have a volunteer for an extra month single man challenge! :D
Yeah if only I was part of the first challenge I would totally double down. With out a doubt. Alas I just don't think it would be right seeing how I missed the first month and all.
I really wish I could have though. To bad. :whistle:
Bwak Bwak :whistle:
Post by: coSAK on October 29, 2014, 04:42:04 PM
:rofl:Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
Looks like we have a volunteer for an extra month single man challenge! :D
Yeah if only I was part of the first challenge I would totally double down. With out a doubt. Alas I just don't think it would be right seeing how I missed the first month and all.
I really wish I could have though. To bad. :whistle:
Bwak Bwak :whistle:
Post by: SAK Guy on October 29, 2014, 05:12:37 PM
They come in red you know :pok:
An old red SI?
I could never afford a 60's one.... :(
can you afford NOT to get one?
:ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh
:facepalm:
Post by: HarleyXJGuy on October 29, 2014, 05:25:21 PM
Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
Looks like we have a volunteer for an extra month single man challenge! :D
Yeah if only I was part of the first challenge I would totally double down. With out a doubt. Alas I just don't think it would be right seeing how I missed the first month and all.
I really wish I could have though. To bad. :whistle:
Bwak Bwak :whistle:
No no I so wish I could but you know rules is rules.
Post by: pfrsantos on October 29, 2014, 07:06:32 PM
Bah, 31 days aint nothing.
Everyone knows a real man would double down on any bet worth making.
Go a whole nother month. :pok:
Looks like we have a volunteer for an extra month single man challenge! :D
Yeah if only I was part of the first challenge I would totally double down. With out a doubt. Alas I just don't think it would be right seeing how I missed the first month and all.
I really wish I could have though. To bad. :whistle:
Bwak Bwak :whistle:
No no I so wish I could but you know rules is rules.
Womp womp womp (http://www.youtube.com/watch?v=tKdcjJoXeEY#)
:rofl: :rofl: :rofl: :rofl:
Post by: Monrogue on October 29, 2014, 09:32:03 PM
I will say again that this challenge has proven that I could likely get by with a Compact only....if I wanted to ;) I've only had to use pliers once this whole time. I haven't encountered anything that the Compact couldn't handle during my normal daily life outside of that one instance of the plier need, and the one instance of needing to reach a cord under my desk. In neither of those instances would my Rogueneer have helped. I think it's just extra bulk I'd be carrying, but I do love it >:D
Post by: coSAK on October 29, 2014, 11:38:24 PM
I've been using my Compact almost daily to cut open boxes at work. I used the nail file after trimming my nails last night. I used the scissors for some whisker trimming maintenance today, and used the toothpick for its intended purpose. One day left :D
I will say again that this challenge has proven that I could likely get by with a Compact only....if I wanted to ;) I've only had to use pliers once this whole time. I haven't encountered anything that the Compact couldn't handle during my normal daily life outside of that one instance of the plier need, and the one instance of needing to reach a cord under my desk. In neither of those instances would my Rogueneer have helped. I think it's just extra bulk I'd be carrying, but I do love it >:D
+1
Post by: ducttapetech on October 30, 2014, 12:16:51 AM
Nate
Post by: powernoodle on October 30, 2014, 12:27:57 AM
(http://smileyicons.net/s/955.gif)
Post by: Caranthanus on October 30, 2014, 12:41:48 AM
I've been using my Compact almost daily to cut open boxes at work. I used the nail file after trimming my nails last night. I used the scissors for some whisker trimming maintenance today, and used the toothpick for its intended purpose. One day left :D
I will say again that this challenge has proven that I could likely get by with a Compact only....if I wanted to ;) I've only had to use pliers once this whole time. I haven't encountered anything that the Compact couldn't handle during my normal daily life outside of that one instance of the plier need, and the one instance of needing to reach a cord under my desk. In neither of those instances would my Rogueneer have helped. I think it's just extra bulk I'd be carrying, but I do love it >:D
Am I seeing right :o :think: is that a Black Pioneer with red shield :ahhh
Are you already prepared for next minimalistic challenge >:D
Told you that would be hard to revert to bulky one :whistle: ;)
Post by: Monrogue on October 30, 2014, 03:36:18 AM
I've been using my Compact almost daily to cut open boxes at work. I used the nail file after trimming my nails last night. I used the scissors for some whisker trimming maintenance today, and used the toothpick for its intended purpose. One day left :D
I will say again that this challenge has proven that I could likely get by with a Compact only....if I wanted to ;) I've only had to use pliers once this whole time. I haven't encountered anything that the Compact couldn't handle during my normal daily life outside of that one instance of the plier need, and the one instance of needing to reach a cord under my desk. In neither of those instances would my Rogueneer have helped. I think it's just extra bulk I'd be carrying, but I do love it >:D
Am I seeing right :o :think: is that a Black Pioneer with red shield :ahhh
Are you already prepared for next minimalistic challenge >:D
Told you that would be hard to revert to bulky one :whistle: ;)
Yes my friend, your eyes are not deceiving you ;) If I were to truly go minimalist, I'd have to give it a go with my new Pioneer. The Compact wasn't as much of a challenge as I originally thought it may be. The biggest challenge was missing my Rogueneer. So now I have another problem with my carry. I want to go back to the Rogueneer, but I also want to carry my new Pioneer, which would have to be paired with the Compact probably. I guess we'll see after the final day of the challenge ;)
Post by: JAfromMn on October 30, 2014, 03:37:48 AM
I could never do it.
I wish i could.
:hatsoff: to all of you and thanks.
Post by: ducttapetech on October 30, 2014, 09:29:21 AM
Nate
Post by: Etherealicer on October 30, 2014, 09:46:24 AM
Last Day!!! Woo hoo!!!It might be a bit early, still :drink:
Nate
Post by: hiraethus on October 30, 2014, 10:49:58 AM
Post by: zoidberg on October 30, 2014, 11:01:31 AM
I had planned to see the month out but now I'm not sure.
What do you think I should do?
Post by: Etherealicer on October 30, 2014, 11:05:17 AM
I've got tomorrow's carry lined up: Cybertool 41, Swisstool X and Fenix LD20. 8)You probably should add Farmer, Micra, Surge and a Machete, just to compensate :D
Post by: ducttapetech on October 30, 2014, 11:11:56 AM
One more hour and the challenge will be over!Not sure about you, but I am not. No way!
I had planned to see the month out but now I'm not sure.
What do you think I should do?
Nate
Post by: pfrsantos on October 30, 2014, 11:12:27 AM
Props to all of you cats who have honestly gone minimalist for 30 days, as well as those who have been honest in acknowledging your withdrawal from this glorious event.
(http://smileyicons.net/s/955.gif)
+1
Must admit this was not a huge challenge, since my office work doesn't require me to perform many heavy tasks. The odd open/close computer case, attach/dettach a hard drive, redo an electric cord extension and that's about it.
Post by: pfrsantos on October 30, 2014, 11:13:35 AM
One more hour and the challenge will be over!
I had planned to see the month out but now I'm not sure.
What do you think I should do?
Wait for New Year's Eve...
:pok: :pok:
Post by: magentus on October 30, 2014, 11:16:10 AM
I've got tomorrow's carry lined up: Cybertool 41, Swisstool X and Fenix LD20. 8)
Is that all? Just 2 SAK's? surely you have more than 2 pockets.
Post by: zoidberg on October 30, 2014, 11:32:05 AM
One more hour and the challenge will be over!
I had planned to see the month out but now I'm not sure.
What do you think I should do?
Wait for New Year's Eve...
:pok: :pok:
Err nar thanks. :twak:
Post by: zoidberg on October 30, 2014, 12:08:35 PM
Post by: gustophersmob on October 30, 2014, 12:16:43 PM
And thats time! Another challenge done and dusted! :nanadance:
haha, congrats on making it :salute:
Still early in the day in this part of the world... over 16 hours to go :ahhh
Post by: pfrsantos on October 30, 2014, 12:32:24 PM
And thats time! Another challenge done and dusted!:nanadance:
BANANA!!!!
Minions banana (http://www.youtube.com/watch?v=l924olE7ZJU#ws)
Post by: SAK Guy on October 30, 2014, 12:56:08 PM
Joe Cocker - You're so beautiful (lyrics) (http://www.youtube.com/watch?v=xsOSt3hNRY0#ws)
Post by: magentus on October 30, 2014, 01:04:48 PM
Post by: SAK Guy on October 30, 2014, 01:13:17 PM
Still a whole nother day to go for us 'end of the monthers'
I know....just needed a boost! :D
Post by: zoidberg on October 30, 2014, 01:18:08 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/SAKcomparison_zps2f8f6686.jpg)Getting them ready?
Post by: Monrogue on October 30, 2014, 01:22:12 PM
Last Day!!! Woo hoo!!!
Nate
Yeah! Wooooooo!
Post by: SAK Guy on October 30, 2014, 01:26:17 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/SAKcomparison_zps2f8f6686.jpg)Getting them ready?
:climber: :climber: :climber: :climber: :climber: :climber:
Yes!
Post by: getahl on October 30, 2014, 01:48:04 PM
As for the Classic, aside from a box to tackle, I haven't used it whatsoever in the past two days.
Post by: ducttapetech on October 30, 2014, 01:55:03 PM
Nate
Post by: magentus on October 30, 2014, 02:10:14 PM
Post by: ducttapetech on October 30, 2014, 02:12:35 PM
Nate
Post by: ducttapetech on October 30, 2014, 02:14:29 PM
Nate
Post by: shark_za on October 30, 2014, 03:01:52 PM
Decided the Nylon toughness would work for a camping companion and used a local retailers online promo to really score it at the right price.
Nylon Huntsman
Post by: SAK Guy on October 30, 2014, 04:23:08 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/PioneerCoffee_zps407dcc51.jpg)
Post by: ducttapetech on October 30, 2014, 04:37:25 PM
Nice pic btw.
Nate
Post by: SAK Guy on October 30, 2014, 04:53:13 PM
That anything like cowboy coffee or camping coffee?
Nice pic btw.
Nate
Thanks Nate! It was strong, black and had some coffee grounds in the bottom so probably close! :D
Post by: ducttapetech on October 30, 2014, 04:54:35 PM
Yep! Some stuff! I even like a little ash in it from the campfire. Lol!That anything like cowboy coffee or camping coffee?
Nice pic btw.
Nate
Thanks Nate! It was strong, black and had some coffee grounds in the bottom so probably close! :D
Nate
Post by: gustophersmob on October 30, 2014, 06:37:13 PM
So, I went back through the thread and modified one of the lists to show the people who entered the challenge and removed those who did not want to be included in the drawing. I then numbered the list.
My plan is to use random.org to pick the two numbers sometime tomorrow.
Here is the list:
1 Higgins617
2 SAK Guy
3 eddie1115
4 ducttapetech
5 Toolslinger
6 Hyatt181
7 colt 1911
8 powernoodle
9 arizonaranchman
10 Monrogue
11 haackeg
12 SAKchief
13 shark_za
14 Sorel
15 Grass
16 red_rider_1979
17 hiraethus
18 Etherealicer
19 coSAK
20 zoidberg
21 kirk13
22 gene stoner
23 pfrsantos
24 derekmac
25 magentus
26 cbl51
27 Caranthanus
28 fx17
29 K13ss4r
30 ivan_partizan
31 shamus
32 Fast Bill
33 mrynnr
34 Sazabi
Post by: pfrsantos on October 30, 2014, 06:38:57 PM
:facepalm:
Post by: Freaver on October 30, 2014, 06:48:53 PM
I forgot this was a contest with a prize...
:facepalm:
Me too. Doesn't matter, wouldn't have been able to complete it either way. Mainly because I don't have any 2-layer SAKs.
Post by: pfrsantos on October 30, 2014, 06:50:43 PM
I forgot this was a contest with a prize...
:facepalm:
Me too. Doesn't matter, wouldn't have been able to complete it either way. Mainly because I don't have any 2-layer SAKs.
They're all one-night-standers, huh?...
:rofl: :rofl: :rofl: :rofl:
Post by: Hyatt181 on October 30, 2014, 08:00:48 PM
But will be looking forward to carrying my cyber34 and a farmer or cadet or explorer or modified explorer mechanic combo or custom alox electrician or whatever accept a compact.
Sent from my iPhone using Tapatalk
Post by: magentus on October 30, 2014, 08:17:39 PM
Post by: HarleyXJGuy on October 30, 2014, 08:35:21 PM
Well if you was in Afghanistan and just doing the 30 days you would be done!
Bring on the Leatherman Surge and Swisschamp XLT who hoo!!!!! :ahhh
Post by: Fast Bill on October 30, 2014, 08:37:38 PM
I forgot this was a contest with a prize...
:facepalm:
To be honest I've "awarded" myself a couple of new SAK's in the meantime ... which can't have been the point can it ??
Post by: Etherealicer on October 30, 2014, 10:04:57 PM
Anyway, please take me off that list. I know shocking, E never sits out GAWs. But I'm well supplied with Swiss Made MT/SAKs and would like this pretty boy and his little sister to go to someone else.
Good luck everybody :cheers:
Post by: derekmac on October 30, 2014, 10:08:46 PM
Thanks for the chance, and good luck to all!! :cheers:
Post by: ducttapetech on October 30, 2014, 10:48:03 PM
Nate
Post by: Freaver on October 30, 2014, 11:09:29 PM
I forgot this was a contest with a prize...
:facepalm:
Me too. Doesn't matter, wouldn't have been able to complete it either way. Mainly because I don't have any 2-layer SAKs.
They're all one-night-standers, huh?...
:rofl: :rofl: :rofl: :rofl:
Well... It is clear that what I said could potentially have different meanings, but either my English skills aren't good enough or I'm too tired to see it. I hate to ask, but could somebody please explain the joke to me? :oops: :think:
Post by: Etherealicer on October 30, 2014, 11:16:36 PM
I have had some fun with this. I am also glad it is almost over. I have learned that minimalism does not work. Does not work for me anyways. I failed the light challenge tons of times. Only failed the tool challenge once. The Compact, while a nice SAK, has not been able to handle a lot of jobs that I came across. It will still get some pocket time when I get some new scales for it. Just want to add, thanks again Colt!Uhh, I forgot about the light challenge. Well, I for one did good on that one, the Midnight Manager covered all my light needs. :salute:
Nate
Post by: ducttapetech on October 30, 2014, 11:32:10 PM
I was hoping I could, but no luck. Messing around breakerboxes in the dark with a 2 lumen torch, no thanks.I have had some fun with this. I am also glad it is almost over. I have learned that minimalism does not work. Does not work for me anyways. I failed the light challenge tons of times. Only failed the tool challenge once. The Compact, while a nice SAK, has not been able to handle a lot of jobs that I came across. It will still get some pocket time when I get some new scales for it. Just want to add, thanks again Colt!Uhh, I forgot about the light challenge. Well, I for one did good on that one, the Midnight Manager covered all my light needs. :salute:
Nate
Nate
Post by: arizonaranchman on October 31, 2014, 01:22:15 AM
Post by: SAK Guy on October 31, 2014, 01:27:17 AM
It's been fun and I love the Pioneer, but I do love having the other parts of my daily Kit on me. Leatherman Classic, a traditional (usually a Stockman) and then the Pioneer or Farmer. :)
+1 I'm thinking of adding a Trad stockman and multilayer SAKs to my EDC bag on Sat...oh and a big GEC 23. :D
Post by: Monrogue on October 31, 2014, 03:11:30 AM
Post by: getahl on October 31, 2014, 03:56:41 AM
Post by: SAKchief on October 31, 2014, 05:43:28 AM
Post by: zoidberg on October 31, 2014, 05:48:51 AM
Bring on the next challenge... Swisschamp pocket EDC? :think:
No more challenges this year. :twak:
Post by: Fast Bill on October 31, 2014, 07:57:00 AM
Post by: Etherealicer on October 31, 2014, 08:14:30 AM
Now I'm considering to combine the Midnight Manager with a SkeleTool. At any rate, it was an informative challenge, thanks for beating us into doing it :tu:
Post by: shark_za on October 31, 2014, 10:12:22 AM
I missed the Phillips and scissor capability, made do with the eyeglass screwdriver for a very small screw and the blade was used to cut tags and bindings that would have been easier with a scissors.
Add a scissors to the waiter while going to 91mm and its a compact (I got one during the month) and I'll put a manager on my keys or security tags to give a better small Philips capability.
I have ordered a Super Tinker and a true utility corkscrew to achieve the same load-out.
Post by: ducttapetech on October 31, 2014, 10:15:31 AM
Post by: zoidberg on October 31, 2014, 10:30:03 AM
Ahhhhh, so much better....
Isn't it just. :tu:
Maybe we should do a Heavy Duty MT Challenge. :P
Post by: hiraethus on October 31, 2014, 10:32:30 AM
(https://farm4.staticflickr.com/3954/15486783468_c1a08fdb6a_z.jpg) (https://www.flickr.com/photos/26008756@N08/15486783468/)
Post by: hiraethus on October 31, 2014, 10:33:41 AM
Ahhhhh, so much better....
Isn't it just. :tu:
Maybe we should do a Heavy Duty MT Challenge. :P
HD MT or FAT SAKs. :tu:
Post by: ducttapetech on October 31, 2014, 11:01:01 AM
Nate
Post by: ducttapetech on October 31, 2014, 11:01:32 AM
As a little treat, I've got a box-fresh orange Farmer in my pocket today, along with a Fenix LD09 and LM Style PS.Nice set up there.
(https://farm4.staticflickr.com/3954/15486783468_c1a08fdb6a_z.jpg) (https://www.flickr.com/photos/26008756@N08/15486783468/)
Nate
Post by: zoidberg on October 31, 2014, 11:12:02 AM
Ahhhhh, so much better....
Isn't it just. :tu:
Maybe we should do a Heavy Duty MT Challenge. :P
HD MT or FAT SAKs. :tu:
Both, with a 2xAA flashlight. :pok:
Post by: ducttapetech on October 31, 2014, 11:21:52 AM
Nate
Post by: zoidberg on October 31, 2014, 11:35:55 AM
Post by: pfrsantos on October 31, 2014, 12:10:50 PM
I'm not going to carry the dolphin. :ahhh
I have no choice...
(https://sp.yimg.com/ib/th?id=HN.608002872205773417&pid=15.1&P=0)
Post by: gustophersmob on October 31, 2014, 12:28:14 PM
It was certainly an interesting month. It proved to me that I really don't need much as far a a SAK goes. I got along just fine with the Wenger. The biggest challenge was wanting to carry something else.
It also goes to reinforce the obvious: we all have different needs. Whereas I and others could get along fine with next to nothing, others situations require a bigger load out.
Either way, I for one am glad to be back to normal :cheers:
So, here is the final list, removing Etherealicer per his request:
1 Higgins617
2 SAK Guy
3 eddie1115
4 ducttapetech
5 Toolslinger
6 Hyatt181
7 colt 1911
8 powernoodle
9 arizonaranchman
10 Monrogue
11 haackeg
12 SAKchief
13 shark_za
14 Sorel
15 Grass
16 red_rider_1979
17 hiraethus
18 coSAK
19 zoidberg
20 kirk13
21 gene stoner
22 pfrsantos
23 derekmac
24 magentus
25 cbl51
26 Caranthanus
27 fx17
28 K13ss4r
29 ivan_partizan
30 shamus
31 Fast Bill
32 mrynnr
33 Sazabi
And according to random.org, the winner of the Spirit is: #24, magentus
And the winner of the Wenger is: #9, arizonaranchman
Congratulations, guys. PM me your addresses and I'll get them posted ASAP.
Thanks again everyone for participating. It was
Post by: ducttapetech on October 31, 2014, 12:30:53 PM
Nate
Post by: zoidberg on October 31, 2014, 12:31:17 PM
Post by: pfrsantos on October 31, 2014, 12:38:26 PM
Wow, its FINALLY over 8)
It was certainly an interesting month. It proved to me that I really don't need much as far a a SAK goes. I got along just fine with the Wenger. The biggest challenge was wanting to carry something else.
It also goes to reinforce the obvious: we all have different needs. Whereas I and others could get along fine with next to nothing, others situations require a bigger load out.
Either way, I for one am glad to be back to normal :cheers:
(...)
And according to random.org, the winner of the Spirit is: #24, magentus
And the winner of the Wenger is: #9, arizonaranchman
Thanks again everyone for participating. It wasmaddeningfun! :drink:
Yes.
Yes.
Congratulations to the winners and all the participants for holding on until the end!
:cheers: :cheers:
Post by: SAK Guy on October 31, 2014, 12:43:32 PM
Post by: HarleyXJGuy on October 31, 2014, 01:14:51 PM
One more day, folks! For me anyway. Didn't know it was a minimal light challenge, although that doesn't really affect the Fenix E01 I've had on my pocket for two or three years now. I did change my normal one out for a new one, because the old one was starting to flicker and sputter, and generally becoming unreliable.
If you clean and grease the threads I am willing to bet that fixes it right up.
Post by: Monrogue on October 31, 2014, 01:31:55 PM
I'm so happy to have my Rogueneer back in my pocket though, and I've already readjusted to the additional bulk/weight :D
Post by: derekmac on October 31, 2014, 01:38:29 PM
If Etherealicer hadn't dropped out, I would have won!! :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:
Congrats to the winners though!
Post by: Higgins617 on October 31, 2014, 01:39:12 PM
Post by: Etherealicer on October 31, 2014, 01:40:19 PM
Nooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo!!!!!!!!!!!>:D >:D >:D
If Etherealicer hadn't dropped out, I would have won!! :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:
Congrats to the winners though!
Thanks for the tortur.... I mean challenge. It was fun, and congrats to the winners!!:rofl: so +1 on this one :salute:
Post by: SAK Guy on October 31, 2014, 02:22:04 PM
(http://kupika.com/pics/2011/04/14/fv_zwjppsszjq.jpg)
Post by: HarleyXJGuy on October 31, 2014, 03:26:40 PM
Come on guys. Carrying one basic SAK for a month is hard but it could be much worse.
(http://kupika.com/pics/2011/04/14/fv_zwjppsszjq.jpg)
:rofl: :rofl: :rofl: :rofl:
Reminds me of Joel?
Post by: AimlessWanderer on October 31, 2014, 03:28:12 PM
Post by: zoidberg on October 31, 2014, 03:32:23 PM
Post by: arizonaranchman on October 31, 2014, 04:05:38 PM
Wow, its FINALLY over 8)
It was certainly an interesting month. It proved to me that I really don't need much as far a a SAK goes. I got along just fine with the Wenger. The biggest challenge was wanting to carry something else.
It also goes to reinforce the obvious: we all have different needs. Whereas I and others could get along fine with next to nothing, others situations require a bigger load out.
Either way, I for one am glad to be back to normal :cheers:
So, here is the final list, removing Etherealicer per his request:
1 Higgins617
2 SAK Guy
3 eddie1115
4 ducttapetech
5 Toolslinger
6 Hyatt181
7 colt 1911
8 powernoodle
9 arizonaranchman
10 Monrogue
11 haackeg
12 SAKchief
13 shark_za
14 Sorel
15 Grass
16 red_rider_1979
17 hiraethus
18 coSAK
19 zoidberg
20 kirk13
21 gene stoner
22 pfrsantos
23 derekmac
24 magentus
25 cbl51
26 Caranthanus
27 fx17
28 K13ss4r
29 ivan_partizan
30 shamus
31 Fast Bill
32 mrynnr
33 Sazabi
And according to random.org, the winner of the Spirit is: #24, magentus
And the winner of the Wenger is: #9, arizonaranchman
Congratulations, guys. PM me your addresses and I'll get them posted ASAP.
Thanks again everyone for participating. It wasmaddeningfun! :drink:
Wow thanks so much, what a wonderful surprise! It was a fun experience. I love the SAK more and more as time goes on - I really admire it's quality and precision. Though I do enjoy switching them up amongst about half dozen favorites (a traditional combined with an SAK is how I like to roll).
I added a 2-blade GEC #33 Conductor to my other pocket this morning as a companion to the Pioneer on this chilly/foggy morning. :)
Post by: Caranthanus on October 31, 2014, 04:11:14 PM
Btw, like magentus, I'm continuing the struggle till the end of the month :facepalm:
SAK rules!
:climber:
Post by: colt 1911 on October 31, 2014, 04:21:10 PM
Bring on the next challenge... Swisschamp pocket EDC? :think:
+1
Sak's rule !
Post by: SAK Guy on October 31, 2014, 04:34:54 PM
Bring on the next challenge... Swisschamp pocket EDC? :think:
+1
Sak's rule !
+100!!!!
Post by: SAK Guy on October 31, 2014, 05:08:11 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/GratedPioneer_zps6ef887d7.jpg)
Post by: getahl on October 31, 2014, 05:37:29 PM
Cleaned it about a month ago or so, which worked for a couple weeks. I'm not too torn up over a ten dollar torch.One more day, folks! For me anyway. Didn't know it was a minimal light challenge, although that doesn't really affect the Fenix E01 I've had on my pocket for two or three years now. I did change my normal one out for a new one, because the old one was starting to flicker and sputter, and generally becoming unreliable.
If you clean and grease the threads I am willing to bet that fixes it right up.
Post by: magentus on October 31, 2014, 05:42:28 PM
I will post pics when the Spirit arrives.
:salute:
Post by: Caranthanus on October 31, 2014, 08:38:10 PM
Yes my friend, your eyes are not deceiving you ;) If I were to truly go minimalist, I'd have to give it a go with my new Pioneer. The Compact wasn't as much of a challenge as I originally thought it may be. The biggest challenge was missing my Rogueneer. So now I have another problem with my carry. I want to go back to the Rogueneer, but I also want to carry my new Pioneer, which would have to be paired with the Compact probably. I guess we'll see after the final day of the challenge ;)Told you, my friend, told you ... :facepalm:
;)
Post by: Monrogue on October 31, 2014, 08:53:32 PM
Yes my friend, your eyes are not deceiving you ;) If I were to truly go minimalist, I'd have to give it a go with my new Pioneer. The Compact wasn't as much of a challenge as I originally thought it may be. The biggest challenge was missing my Rogueneer. So now I have another problem with my carry. I want to go back to the Rogueneer, but I also want to carry my new Pioneer, which would have to be paired with the Compact probably. I guess we'll see after the final day of the challenge ;)Told you, my friend, told you ... :facepalm:
;)
Yup ;) So today I carried both the Rogueneer and the new Pioneer >:D
Post by: derekmac on October 31, 2014, 08:54:46 PM
Thanks Gustophersmob - What an MT to be my first! :drool: I am so chuffed! I loved doing the challenge too and this is icing on the cake. Thanks for your generosity and well done everyone else.Well I don't feel quite as bad being bumped from #24 since this is now your first MT. :salute: I am still trying to get Etherealicer banned though!!!! >:D :rofl:
I will post pics when the Spirit arrives.
:salute:
Post by: Caranthanus on October 31, 2014, 09:44:21 PM
:DYes my friend, your eyes are not deceiving you ;) If I were to truly go minimalist, I'd have to give it a go with my new Pioneer. The Compact wasn't as much of a challenge as I originally thought it may be. The biggest challenge was missing my Rogueneer. So now I have another problem with my carry. I want to go back to the Rogueneer, but I also want to carry my new Pioneer, which would have to be paired with the Compact probably. I guess we'll see after the final day of the challenge ;)Told you, my friend, told you ... :facepalm:
;)
Yup ;) So today I carried both the Rogueneer and the new Pioneer >:D
Ready for the apocalypse ... :2tu:
Post by: zoidberg on November 01, 2014, 12:04:58 AM
Pioneer today, again. Finishing out the month.Cool pic mate. 8)
(http://i833.photobucket.com/albums/zz256/SAKGuy/GratedPioneer_zps6ef887d7.jpg)
Post by: SAK Guy on November 01, 2014, 12:12:00 AM
Pioneer today, again. Finishing out the month.Cool pic mate. 8)
(http://i833.photobucket.com/albums/zz256/SAKGuy/GratedPioneer_zps6ef887d7.jpg)
Thanks buddy! :salute:
Post by: Fast Bill on November 01, 2014, 07:56:55 AM
OK I can get by very well with a simple EDC but NOOOOO I really don't want that when I know there are more handy tools to be had in that same convenient SAK package.
And that's the thing for me ... this just underlines what a great thing even a minimalist SAK can be to have in your pocket. Add tools and things just keep getting better :D
If I really wanted this self-denial stuff I'd have been a monk :angel:
But ... thanks especially Gustophersmob for coming up with a quite maddening challenge :ahhh :ahhh :ahhh
Post by: Aloha on November 01, 2014, 08:33:54 AM
Post by: magentus on November 01, 2014, 09:57:36 AM
While I didn't participate I followed along. Congrats to the winners and really to everyone who participated. Thanks to GM for a neat way fall in love ( in most cases ) with the simple SAK.
+1 - I nearly didn't put my SI away this morning - and ironically, it bit me last night (I was idly fiddling with the awl :facepalm:)
Post by: SAK Guy on November 01, 2014, 03:46:01 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/SatEDC_zps0cb037a8.jpg)
Vic
Cybertool 34
Swiss Champ
Pioneer X2
Farmer
Spartan Lite
Wenger
Soldier
Basic 09
Clipper
Traditional
Schrade SC505
Schrade 194OT
GEC 85
GEC23L
Post by: shark_za on November 01, 2014, 04:50:18 PM
Compact with E05, some more lights and a snubbie.
My old Delica needs some love just because.
Post by: ducttapetech on November 01, 2014, 05:06:29 PM
Nice set up.
Nate
Post by: SAK Guy on November 01, 2014, 05:29:08 PM
Whole new meaning to shotgun wedding. LOL!
Nice set up.
Nate
+100!!! Sounds like a wedding that I might actually want to go to! Will there be an "Ammo Hors d'oeuvres" table? :D
Post by: ducttapetech on November 01, 2014, 08:00:26 PM
You and me both! Sounds like a great wedding.Whole new meaning to shotgun wedding. LOL!
Nice set up.
Nate
+100!!! Sounds like a wedding that I might actually want to go to! Will there be an "Ammo Hors d'oeuvres" table? :D
Nate
Post by: SAK Guy on November 01, 2014, 08:23:05 PM
Post by: Caranthanus on November 01, 2014, 10:59:09 PM
Post challenge EDC(s) :cheers::rofl: :tu:
Btw, I've survived too :woohoo:
Post by: SAK Guy on November 02, 2014, 12:08:27 AM
Post challenge EDC(s) :cheers::rofl: :tu:
Btw, I've survived too :woohoo:
Congrats!!! :cheers:
Post by: Monrogue on November 02, 2014, 04:22:35 AM
Post challenge EDC(s) :cheers::rofl: :tu:
Btw, I've survived too :woohoo:
:tu: Now are you back to the Your Troubleshooter? :pok:
Post by: Caranthanus on November 02, 2014, 11:37:23 PM
For God's sake, how do you guessed it :facepalm:Post challenge EDC(s) :cheers::rofl: :tu:
Btw, I've survived too :woohoo:
:tu: Now are you back to the Your Troubleshooter? :pok:
(http://s9.postimg.org/hbx3u6qfj/tsh.jpg)
Freshly swept out ... :D
;)
Post by: Gareth on November 03, 2014, 09:04:20 AM
Post by: SAK Guy on November 03, 2014, 09:08:16 AM
For God's sake, how do you guessed it :facepalm:Post challenge EDC(s) :cheers::rofl: :tu:
Btw, I've survived too :woohoo:
:tu: Now are you back to the Your Troubleshooter? :pok:
(http://s9.postimg.org/hbx3u6qfj/tsh.jpg)
Freshly swept out ... :D
;)
:2tu:
Post by: AimlessWanderer on November 03, 2014, 12:38:08 PM
I have to say I'm rather glad the challenge is all over. Other than the couple of times I needed a Phillips screwdriver that I noted I actually did survive, but really missed being able to change what I was carrying when I liked. Also if I'd still been working there would have simply no way I's have lasted more than a single day. :D
Yeah, work was the biggest obstacle for me too - although I did find it extremely limiting away from work too.
Lesson learned :D
Post by: derekmac on November 03, 2014, 03:08:23 PM
Post by: magentus on November 03, 2014, 03:54:24 PM
Post by: SAK Guy on November 03, 2014, 04:01:03 PM
My EDC "Obsession Bag" is close by in case I start jonesing for extra layers! :tu:
Post by: magentus on November 03, 2014, 04:03:17 PM
I have my Farmer close at hand, my SI in my pocket as well as my Tom Sawyer and I'm still hankering after my modded Camper as well! How many do I need??
Loved your EDC bag pic too SAK Guy :rofl:
Post by: SAK Guy on November 03, 2014, 04:12:53 PM
It's like being in a sweet shop isn't it?
I have my Farmer close at hand, my SI in my pocket as well as my Tom Sawyer and I'm still hankering after my modded Camper as well! How many do I need??
Loved your EDC bag pic too SAK Guy :rofl:
:D Thanks! I just want to pile all mine up, jump in and swim around like Uncle Scrooge! :climber:
Post by: HarleyXJGuy on November 03, 2014, 04:15:06 PM
I'm still carrying my OC red Pioneer, but I have my BO BN MP600 today too. :)
My poor MP 600 has been so neglected since getting my shiny new Wave. Miss the flik.
(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/600.jpg~original)
And it is official no more inside pictures with the phone.