Multitool.org Forum
Tool Talk => Keychain and One Piece Tools => Topic started by: John on July 05, 2010, 10:19:17 PM
-
Hi guys I took a risk and ordered a EDC screwdriver,the risk was not knowing "what with our crazy customs policies" if it would be seized at the border as a Chinese finger torture device :ahhh :rofl: well you never know ::) :D
I don't usually say first off that it's a great tool but it really is ;)
You can stick one on your keys and forget about it,it's small and light enough :tu:
Here's what I got the EDC screwdriver and a spare end cap in green,
(http://i167.photobucket.com/albums/u122/titan1833/tas/002-18.jpg)
The bit older is 50mm long most I've come across are 60mm I also found the one made in the US has a much better neo magnet to hold in the bit,it had no problem picking up this tin weighing 36 grams.
(http://i167.photobucket.com/albums/u122/titan1833/tas/001-106.jpg)
I like the fact that you can carry it at a reduced size if you wanted,stubby short stubby or even shorter stubby driver ;)
(http://i167.photobucket.com/albums/u122/titan1833/tas/016-1.jpg)
The end caps can be used with any 1/4 " bits without the magnetic holder,tho check they're a tightish fit as I found some are tighter than others :tu:
(http://i167.photobucket.com/albums/u122/titan1833/tas/006-10.jpg)
Another 7mm socket driver,
(http://i167.photobucket.com/albums/u122/titan1833/tas/005-12.jpg)
Carry on key ring or put one in your EDC organizer,you can carry on key ring like this
(http://i167.photobucket.com/albums/u122/titan1833/tas/010-5-1.jpg)
or like this,[EDITED] phew that key had a security number on it :ahhh :D
(http://i167.photobucket.com/albums/u122/titan1833/tas/013-4-1.jpg)
or in your EDC with a extra bit holder
(http://i167.photobucket.com/albums/u122/titan1833/tas/017-1.jpg)
Some jobs especially in electronics require a longer reach,no problem just use three mag holder to extend to 6" or more,
(http://i167.photobucket.com/albums/u122/titan1833/tas/011-4.jpg)
For other jobs tightening pivot points and the like standard size is best
(http://i167.photobucket.com/albums/u122/titan1833/tas/008-4.jpg)
This picture is for reference to size depending how you wish to carry it
(http://i167.photobucket.com/albums/u122/titan1833/tas/014-2.jpg)
That's it guys the EDC screwdriver from county.com made from quality parts even the double ended bit is of high quality IMO,this will be a very useful edition to my EDC :tu:
Picture of the double ended bit supplied,
(http://i167.photobucket.com/albums/u122/titan1833/tas/015-2.jpg)
Any questions please ask guys and thanks for kooking :tu: ,oh! and a big thanks to Ari for getting this to me cheers mate :cheers:
-
Look's a nifty bit of kit mate :tu:
-
Well after "kooking" at your pictures John, I think I'm going to get a couple! :tu: Thanks for the heads up! :)
-
Thanks guys they are quite nifty,sorry about the picture with the keys it doesn't look like that but I had to swirl the number it's for a security door where I live ;)
-
Great idea,thanks for sharing John. :cheers:& :salute:
-
I`v e got those and agree with John they are a great bit of kit :tu: :) John nice pic layout!
-
They do seem to be more useful than I thought they would be :tu:
-
What's the little colored bit made of? It looks like rubber in the pics, but I'm guessing some kind of high-strength plastic?
Until I saw that you'd intentionally twirled some of those pics, I though "Dammit all, they even tried to put a bottle opener on this one!?!" :D
-
@SlackOne you're correct it's high strength plastic :tu: don't let that put you off tho it's plenty enough for the finger torque you'll be using with it ;)
A bottle opener? :rofl: :ahhh thank the lord they left that out :tu:
-
O.o I see its twirled now, I thought you had cut some of it off.
Is it only me that get the idea that it would be more usefull if the double ended bit driver was two diffrent phillips and the plastic thingy you turn with the fingers where of metal, and had two diffrent flatheads on the sides?
-
That's an amazing little tool! :tu: