Post by: dks on January 31, 2014, 06:05:54 PM
These are all cheap (less than $50), easily available knives.
Hen and Rooster, not bad, weak springs, a bit of play, questionable heritage nowadays.
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7826.jpg)
Buck's 301 and 303. The older the better, still value for money, classics and solid, no play.
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7816.jpg)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7817.jpg)
New Schrade, nice handles, cheap in the bad sense, do not buy one.
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7811.jpg)
Older Colt, not bad but not as good as the new ones. I would not buy it again.
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7818.jpg)
Rough Rider, smooth, the scales were a bit loose, really nice to use and handle, cheap in the good sense.
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7814.jpg)
Camillus USA, used but solid, definitely worth buying, smooth and well made.
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7820.jpg)
Schrade (made) USA, used but solid, definitely worth buying, smooth and well made.
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7819.jpg)
Rough Rider, not really a stockman but still basically the same, smooth, looks expensive, too pretty to use.
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7825.jpg)
Victorinox (ok it has 3 blades....) feels like a serious tool; solid and smooth.
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7813.jpg)
Rough rider whittler (3 blades...) Nice and shiny.
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7824.jpg)
Rough rider congress; I though it was a Stockman until I fanned out the blades...
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7813.jpg)
All together, according to size (approximately)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7828.jpg)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7827.jpg)
Main blades
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7829.jpg)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7835.jpg)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7836.jpg)
From the top
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7834.jpg)
According to the number of backsprings they have
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7838.jpg)
shiny
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7842.jpg)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7840.jpg)
not shiny
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7843.jpg)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7844.jpg)
small
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7845.jpg)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7847.jpg)
The only one I carry regularly is the RR stockman as it has a very sexy snap, good quality and is nice to feel and use.
I have also carried the Bucks and they are nice too. I like the bigger one but their blades are a bit thick, because of the hollow grind and thicker stock. The RR has a nice thin flat grind that slices better.
The small USA ones are really good to carry too and feel very solid for their age.
The Hen and Rooster looks too nice. I really do not want to scratch the nice golden covers
The worst are the older Colt (still OK) and the new Schrade .
The 2 spring ones are not noticeably thinner than the 3 spring ones, as they tend to have thicker liners. The 3 spring ones will have thinner springs too and are better for fanning out the blades as they each have their own spring (less stress)
Here are some older similar threads I started a while ago:
Stag
http://forum.multitool.org/index.php?topic=35943.msg578950#msg578950
Sodbusters
http://forum.multitool.org/index.php?topic=42421.msg679710;topicseen#msg679710
etc....
Post by: jerseydevil on January 31, 2014, 07:26:36 PM
Post by: dks on January 31, 2014, 07:41:04 PM
waiting for your pictures :dd:
Post by: ducttapetech on January 31, 2014, 09:40:32 PM
that's us mobile
Post by: Mr. Whippy on January 31, 2014, 09:45:22 PM
Post by: dks on January 31, 2014, 10:13:41 PM
I like that. What does one look for in a "Good quality" Stockman? Scales? Finish? Snap? Steel type?
Get a Buck 301 or a Case xx Stockman.
It depends on what you want it for.
They will all have the same blade selection and most half decent steels should be OK.
Size, grind, blade thickness, colour/material of the handles are important.
I like the thin, flat ground blade of the RR.
They are working knives so wooden or synthetic handles should be better than bone/stag (grip, robustness)
Of all the stockmans I showed only the new Schrade had bad walk and talk.
The best walk and talk was from the buck 303 and the small RR. Also check the spring strength. Case xx seem to have stronger backsprings than Bucks.
Or just get a GEC/Queen :D
Post by: Nhoj on January 31, 2014, 10:22:05 PM
Post by: jerseydevil on February 01, 2014, 03:58:16 AM
Post by: jerseydevil on February 02, 2014, 01:45:40 AM
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2210_zpse7eef6db.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2210_zpse7eef6db.jpg.html)
From the top:
A German-made Indian Brand, carbon steel with real stag handles. Lovely old knife.
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2193_zpsf2d65840.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2193_zpsf2d65840.jpg.html)
Next is a carbon steel, US made Remington that came back to the proper side of the Atlantic thanks to 50ft-trad. I would love to know how old this knife is. The cartridge used as a shield is an old Remington automatic round, probably the .30 Remington, which has been totally obsolete since WWII.......
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2197_zps1d1db910.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2197_zps1d1db910.jpg.html)
Spot the differences! A pair of Bucks - a US made 301 and a Chines-made 371. Both are actually very nice knives. The 371 is a very well-built knife! These are the only three-spring stockmen I own, and as such are wider than the others shown. The 301 is one of my favorite carry slipjoints.
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2198_zpsdbca9882.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2198_zpsdbca9882.jpg.html)
And finally, two Case pattern #18 medium stockmen - one stainless, limited edition orange G10, and the other CV in yellow Derlin. The #18 makes for a great EDC knife, three useful blades without being as large as the other knives I posted.
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2206_zpsf49d0fbf.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2206_zpsf49d0fbf.jpg.html)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2207_zps93858a3f.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2207_zps93858a3f.jpg.html)
And there you have it! My favorites out of these? The Buck 301 and that Remington. That is just an absolutely beautiful vintage knife. :drool:
Post by: jerseydevil on February 02, 2014, 01:50:05 AM
Post by: dks on February 02, 2014, 05:19:05 AM
taaaaaaapaaaaaaas
Post by: jerseydevil on February 03, 2014, 04:49:32 AM
Post by: David on February 03, 2014, 07:46:04 AM
Post by: comis on February 05, 2014, 09:33:43 PM
Thank you for the comparison data and picture, I am slowly warming up to the more traditional folding knives, and am sure these info will be very valuable should I decide to collect more of them in the future!
Post by: jerseydevil on February 09, 2014, 12:58:07 AM
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2212_zpsa6755302.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2212_zpsa6755302.jpg.html)
And the next is another Case, but a bit unusual. This is a Case Humpback Stockman, pattern #046. It's a reissue of a knife that Case stopped production of around 1915. Very pretty knife, very solid. :tu:
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2217_zpsdfd347e5.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2217_zpsdfd347e5.jpg.html)
Post by: kirk13 on February 09, 2014, 01:05:57 AM
Post by: detron on February 09, 2014, 01:12:40 AM
You know you guys made me buy a RR Stockman ?
I think MT.O is leading the world economic stimulation. I know I buy stuff that other members MADE me buy
Post by: jerseydevil on February 09, 2014, 01:34:07 AM
You know you guys made me buy a RR Stockman ?
Only one? :think: I'd better get posting some more pics of different patterns. Don't want that RR to feel lonely, do you? >:D
Post by: dks on February 09, 2014, 08:55:42 AM
I have a stockman on order too, so do not feel guilty.
Post by: dks on February 21, 2014, 03:55:30 PM
GEC, 2007 53 Stockman. Blue oyster handles.
Sexy...
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_7997.jpg)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_8016.jpg)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_8019.jpg)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_8036.jpg)
(http://i1230.photobucket.com/albums/ee484/jladks/toys/IMG_8006.jpg)
Post by: ducttapetech on February 21, 2014, 06:55:57 PM
that's us mobile
Post by: dks on February 21, 2014, 08:57:28 PM
Post by: Corwyn on March 29, 2017, 12:27:02 PM
Post by: dks on March 29, 2017, 12:46:35 PM
Post by: styx on March 29, 2017, 07:50:49 PM
Post by: Poncho65 on March 30, 2017, 02:30:59 AM
Post by: Poncho65 on March 30, 2017, 02:31:50 AM
(https://c1.staticflickr.com/3/2898/32913741063_603d814bc4_z.jpg) (https://flic.kr/p/S9twwc)20170329_171922 (https://flic.kr/p/S9twwc) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
(https://c1.staticflickr.com/3/2875/33576406301_2b2e290b1c_z.jpg) (https://flic.kr/p/Ta2RNV)20170328_135200 (https://flic.kr/p/Ta2RNV) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Post by: Joe58 on March 30, 2017, 03:18:54 AM
Little chunkier/squared off feeling in the hand, which I appreciate actually. Well made.
Post by: SAK Guy on March 30, 2017, 09:26:23 PM
Post by: styx on March 30, 2017, 09:41:59 PM
My sowbelly H&R stockman :tu:
(https://c1.staticflickr.com/3/2898/32913741063_603d814bc4_z.jpg) (https://flic.kr/p/S9twwc)20170329_171922 (https://flic.kr/p/S9twwc) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
(https://c1.staticflickr.com/3/2875/33576406301_2b2e290b1c_z.jpg) (https://flic.kr/p/Ta2RNV)20170328_135200 (https://flic.kr/p/Ta2RNV) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
beautiful knife
Post by: Poncho65 on March 31, 2017, 03:34:14 AM
My sowbelly H&R stockman :tu:
(https://c1.staticflickr.com/3/2898/32913741063_603d814bc4_z.jpg) (https://flic.kr/p/S9twwc)20170329_171922 (https://flic.kr/p/S9twwc) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
(https://c1.staticflickr.com/3/2875/33576406301_2b2e290b1c_z.jpg) (https://flic.kr/p/Ta2RNV)20170328_135200 (https://flic.kr/p/Ta2RNV) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
beautiful knife
Thanks Styx :hatsoff:
Post by: Poncho65 on March 31, 2017, 03:34:49 AM
:nanadance: :nanadance:
Post by: Ray S on April 01, 2017, 05:12:44 AM
Post by: SteveC on April 02, 2017, 06:21:43 PM
Post by: Ron Who on April 02, 2017, 09:24:10 PM
Post by: Ray S on April 02, 2017, 09:57:38 PM
To the right my only stockman, a Gerber with backlocked main blade.Very unusual! I don't recall ever seeing a stockman with a locking blade before. Nice knives!
Post by: Ron Who on April 02, 2017, 10:55:17 PM
To the right my only stockman, a Gerber with backlocked main blade.Very unusual! I don't recall ever seeing a stockman with a locking blade before. Nice knives!
Thanks! The others are a Puma Medici (handmade in Solingen, Germany) and a Fox 500/3 CE (Maniago, Italy).
Post by: Ray S on April 03, 2017, 05:08:19 AM
Camillus 64
Camillus 69
Crucible Knife Co.
Fighting Rooster for the 1982 Blade Fair.
Post by: ColoSwiss on April 09, 2017, 06:49:08 AM
Post by: SAK Guy on April 09, 2017, 07:00:55 AM
Here's a few Scrimshaw Stockman's with a canoe thrown in...
(http://i833.photobucket.com/albums/zz256/SAKGuy/Schrade%20and%20Frontier%20Scrims_zpsup0ubhw6.jpg)
Post by: ColoSwiss on April 09, 2017, 07:03:54 AM
Post by: ColoSwiss on April 09, 2017, 07:06:23 AM
Those are awesome Karl...you should post more over here!! :cheers:
Here's a few Scrimshaw Stockman's with a canoe thrown in...
(http://i833.photobucket.com/albums/zz256/SAKGuy/Schrade%20and%20Frontier%20Scrims_zpsup0ubhw6.jpg)
Keep forgetting to even look at this thread. Get too involved with the SAKs.
Some interesting Scrimshaws! :tu:
Post by: SAK Guy on April 09, 2017, 08:20:27 AM
And some more.
More nice ones!!! :cheers: :cheers:
Most of mine are still over here:
https://forum.multitool.org/index.php/topic,6299.msg1455128.html#msg1455128
:salute:
Post by: ColoSwiss on April 09, 2017, 07:37:18 PM
And some more.
More nice ones!!! :cheers: :cheers:
Most of mine are still over here:
https://forum.multitool.org/index.php/topic,6299.msg1455128.html#msg1455128
:salute:
Some neat looking stuff! :cheers:
Post by: SAK Guy on April 09, 2017, 07:39:05 PM
And some more.
More nice ones!!! :cheers: :cheers:
Most of mine are still over here:
https://forum.multitool.org/index.php/topic,6299.msg1455128.html#msg1455128
:salute:
Some neat looking stuff! :cheers:
Thank you Karl!!! :cheers:
Post by: Ron Who on April 09, 2017, 09:11:00 PM
Those are awesome Karl...you should post more over here!! :cheers:
Here's a few Scrimshaw Stockman's with a canoe thrown in...
I like scrimshaw. I have a Hartkopf knife with damascus blade and ivory handles that I would love to get scrimshawed with pics of a magpie. But I don't know anyone who can do this for me.
Post by: SAK Guy on April 10, 2017, 05:29:04 AM
(http://i833.photobucket.com/albums/zz256/SAKGuy/Frontier%20Stockman%20knives%204-9-17_zpsfpjzmnvn.jpg)
Post by: SAK Guy on April 14, 2017, 05:58:48 PM
Post by: dks on April 14, 2017, 06:21:30 PM
nice knives' people too
Post by: SAK Guy on April 14, 2017, 06:33:56 PM
nice knives people
nice knives' people too
Thx!!!! :cheers:
Post by: SAK Guy on April 15, 2017, 08:32:51 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/Case%20Yellow%20CV%20Jumbo%20Stockman_zpstmcnxpcw.jpg)
Post by: Marcellus on April 16, 2017, 04:04:47 AM
Here are a couple of pics of my assemblage. I'll try and post individual pictures later;I have to get some sleep!
Some nice pieces there Ray
Post by: Poncho65 on April 18, 2017, 03:16:20 PM
Post by: Poncho65 on April 18, 2017, 03:16:56 PM
(https://c1.staticflickr.com/3/2878/33732189260_885a1694b2.jpg) (https://flic.kr/p/ToNhE1)20170418_071218 (https://flic.kr/p/ToNhE1) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
(https://c1.staticflickr.com/3/2899/34076240196_dfa401e5de.jpg) (https://flic.kr/p/TVcD1G)20170418_071152 (https://flic.kr/p/TVcD1G) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Post by: SAK Guy on April 18, 2017, 04:41:35 PM
Post by: SAK Guy on April 18, 2017, 04:42:53 PM
Post by: Poncho65 on April 18, 2017, 06:32:56 PM
Post by: SteveC on January 30, 2018, 07:56:23 PM
Post by: dks on January 30, 2018, 07:57:31 PM
Post by: SteveC on January 30, 2018, 07:58:11 PM
Post by: SteveC on January 30, 2018, 07:58:36 PM
(https://i.imgur.com/USD7keRh.jpg)
Post by: SteveC on January 30, 2018, 08:00:34 PM
Post by: LoopCutter on January 30, 2018, 08:27:11 PM
My few
(https://uploads.tapatalk-cdn.com/20180130/d5b7d353654154b337cde3abec45d7ba.jpg)(https://uploads.tapatalk-cdn.com/20180130/fb00ea10fb45f757a05fd1dad6732379.jpg)
Sent from my iPhone using Tapatalk
Post by: Spartan19 on January 30, 2018, 11:20:38 PM
Post by: LoopCutter on January 31, 2018, 01:02:45 AM
Something familiar about that 303... :DIt appears similar to the 301-BRS model, the one on the left.
The other is 301-BKS.
Both are same size as the Camilus 66.
I do not know the Buck numbering scheme, is the 303 smaller than the 301?
Sent from my iPhone using Tapatalk
Post by: SteveC on January 31, 2018, 01:11:26 AM
Something familiar about that 303... :DIt appears similar to the 301-BRS model, the one on the left.
The other is 301-BKS.
Both are same size as the Camilus 66.
I do not know the Buck numbering scheme, is the 303 smaller than the 301?
Sent from my iPhone using Tapatalk
Yes, the 303 is smaller than the 301
Post by: LoopCutter on January 31, 2018, 01:30:44 AM
Something familiar about that 303... :DIt appears similar to the 301-BRS model, the one on the left.
The other is 301-BKS.
Both are same size as the Camilus 66.
I do not know the Buck numbering scheme, is the 303 smaller than the 301?
Sent from my iPhone using Tapatalk
Post by: SteveC on January 31, 2018, 01:51:26 AM
Post by: David on January 31, 2018, 02:10:17 AM
:shrug: :D
Post by: LoopCutter on January 31, 2018, 02:14:23 AM
Thank you Steve
Sent from my iPhone using Tapatalk
Post by: David on January 31, 2018, 12:00:02 PM
Post by: David on January 31, 2018, 10:40:17 PM
Post by: Spartan19 on February 01, 2018, 01:16:12 AM
Something familiar about that 303... :DIt appears similar to the 301-BRS model, the one on the left.
The other is 301-BKS.
Both are same size as the Camilus 66.
I do not know the Buck numbering scheme, is the 303 smaller than the 301?
Sent from my iPhone using Tapatalk
Yeah, the 303 is the next size down from the 301
Post by: Spartan19 on February 01, 2018, 01:16:49 AM
Good looking Stockmans Steve, LC and Spartan. :like: :like: :like:
Thanks Dave! I :like: The Schrade :tu:
Post by: zoidberg on February 01, 2018, 01:59:20 AM
Schrade 858. Its a big'un.
(https://forum.multitool.org/index.php?action=dlattach;topic=49987.0;attach=355440)
Heck yes, like. :drool: :drool:
Post by: SteveC on February 01, 2018, 05:45:35 AM
Schrade 858. Its a big'un.
(https://forum.multitool.org/index.php?action=dlattach;topic=49987.0;attach=355440)
Heck yes, like. :drool: :drool:
+1 :like: :tu:
Post by: SteveC on February 01, 2018, 05:45:43 AM
Post by: SteveC on February 01, 2018, 05:46:22 AM
Post by: SteveC on February 01, 2018, 05:48:13 AM
(https://i.imgur.com/FrOjuClh.jpg)
Post by: SteveC on February 01, 2018, 10:46:19 PM
(https://i.imgur.com/Ughstdch.jpg)
(https://i.imgur.com/OjvC8RHh.jpg)
Post by: Spartan19 on February 01, 2018, 10:48:48 PM
Post by: VICMAN on February 01, 2018, 11:04:17 PM
If you click on 1104.42 you will see the whole picture
Post by: LoopCutter on February 02, 2018, 12:28:29 AM
Sent from my iPhone using Tapatalk
Post by: VICMAN on February 02, 2018, 02:30:20 PM
Post by: VICMAN on February 02, 2018, 06:36:06 PM
If you click on 983.68 you will see a better picture of it
Post by: LoopCutter on February 02, 2018, 06:57:29 PM
Is the Orange one at 11 o’clock a Case?
For my paws the larger models fit nicely, but will now need to pay attention to the medium models as they may pocket carry better in retirement. (Hopefully by end of year 18)
Sent from my iPhone using Tapatalk
Post by: VICMAN on February 02, 2018, 07:10:24 PM
Another nice family picture.
Is the Orange one at 11 o’clock a Case?
Thanks LoopCutter.
Yes, it is a Case with an orange G10 handle
Good luck on the retirement.
Post by: David on February 02, 2018, 10:16:47 PM
Post by: David on February 02, 2018, 10:19:44 PM
Post by: David on February 02, 2018, 10:34:47 PM
Post by: SteveC on February 03, 2018, 01:51:51 AM
Post by: David on February 03, 2018, 03:59:46 AM
GEC 57 Wrangler
Post by: VICMAN on February 03, 2018, 05:20:44 AM
Lots of good Stockman knives Steve and Vicman!Thanks David
Post by: VICMAN on February 03, 2018, 05:21:48 AM
Schrade Walden 8OT:like:
Post by: VICMAN on February 03, 2018, 05:23:51 AM
Case 6392. I bought this knife new at Bryant Hardware Store in Arkansas City, Kansas in the late 80's. I was working at Ark Valley Feeders at the time.Nice Case. I imagine it holds a lot of memories. :like: :tu: :tu:
Post by: VICMAN on February 03, 2018, 05:25:37 AM
(https://i.imgur.com/98YSmuZh.jpg)Nice old Camilus Steve! :tu: :tu:
(https://i.imgur.com/USD7keRh.jpg)
Post by: VICMAN on February 03, 2018, 05:26:31 AM
GEC 57 WranglerNIce looking knife! :like: :tu: :tu:
Post by: LoopCutter on February 03, 2018, 03:37:36 PM
Sent from my iPhone using Tapatalk
Post by: SteveC on February 03, 2018, 04:00:48 PM
(https://i.imgur.com/98YSmuZh.jpg)Nice old Camilus Steve! :tu: :tu:
(https://i.imgur.com/USD7keRh.jpg)
Thanks !
Post by: LoopCutter on February 03, 2018, 06:08:46 PM
(https://uploads.tapatalk-cdn.com/20180203/57b4a23710712edbef51bc417c888b00.jpg)next to model 66
Sent from my iPhone using Tapatalk
Post by: David on February 04, 2018, 01:58:08 AM
Post by: zoidberg on February 04, 2018, 08:31:57 AM
Post by: VICMAN on February 04, 2018, 04:06:08 PM
I have this Uncle Henry model passed to me after Wife’s father passed away.Nice knives LoopCutter! :like: :tu: :tu:
I have a couple of those Uncle Henry's. They make a great edc knife
Post by: VICMAN on February 04, 2018, 04:10:06 PM
Click on 768.03 for a better picture.
Post by: RR1551 on February 04, 2018, 05:06:43 PM
Sent from my SM-G955U using Tapatalk
Post by: David on February 04, 2018, 05:19:10 PM
Here are a five more of my Case Large stockman knives with a Case Moose with G10 handle in the middle.
Click on 768.03 for a better picture.
More good ones! :like:
Post by: David on February 04, 2018, 05:20:15 PM
Old Schrade(https://uploads.tapatalk-cdn.com/20180204/c3905a2b0eda62525db222c82fa56337.jpg)
Sent from my SM-G955U using Tapatalk
Neat Schrade! :like:
Post by: David on February 04, 2018, 05:21:47 PM
Post by: RR1551 on February 04, 2018, 05:25:49 PM
Schrade 881.Danggg, nice one
Sent from my SM-G955U using Tapatalk
Post by: David on February 04, 2018, 05:31:38 PM
Post by: SteveC on February 04, 2018, 05:32:56 PM
Post by: David on February 04, 2018, 05:35:47 PM
Post by: SteveC on February 04, 2018, 05:37:03 PM
Post by: VICMAN on February 04, 2018, 06:59:32 PM
Thanks David.Here are a five more of my Case Large stockman knives with a Case Moose with G10 handle in the middle.
More good ones! :like:
Post by: VICMAN on February 04, 2018, 07:00:19 PM
Old Schrade:like: :tu: :tu:
Post by: VICMAN on February 04, 2018, 07:00:47 PM
Schrade 881.:like: :tu: :tu:
Post by: VICMAN on February 04, 2018, 07:01:35 PM
Camillus.:like: :tu: :tu:
Post by: LoopCutter on February 04, 2018, 08:13:10 PM
Great models and pictures RR1551 and David.
Sent from my iPhone using Tapatalk
Post by: VICMAN on February 04, 2018, 08:42:37 PM
Wow, VICMAN, some very nice Stockmans there around that Moose.
Thanks LoopCutter.
Post by: RR1551 on February 04, 2018, 08:46:08 PM
Camillus.Nice one! Love carbon steel blades
Sent from my SM-G955U using Tapatalk
Post by: David on February 04, 2018, 09:43:02 PM
Post by: David on February 04, 2018, 09:52:08 PM
Post by: David on February 04, 2018, 10:06:47 PM
Post by: David on February 04, 2018, 10:12:47 PM
Post by: SteveC on February 04, 2018, 10:14:22 PM
Nice ones D ! :like: :tu:
Post by: VICMAN on February 04, 2018, 11:11:11 PM
GEC 66 Calf RoperI like the looks of that one, :like: :tu: :tu:
Post by: VICMAN on February 10, 2018, 10:12:21 PM
The second knife (3rd picture) is a Schrade Large Stockman.
The third knife is a Camillus stockman.
Click on 504.8, 289.65, 314.36, and 728.09 for full pictures.
Post by: dks on February 10, 2018, 10:20:42 PM
Post by: VICMAN on February 10, 2018, 10:43:19 PM
the third one is sexyThanks dks
Post by: VICMAN on February 10, 2018, 10:45:15 PM
Click on 296.65 for full picture.
Post by: David on February 10, 2018, 10:53:02 PM
Post by: David on February 10, 2018, 10:56:47 PM
Post by: SteveC on February 10, 2018, 11:33:41 PM
Post by: VICMAN on February 10, 2018, 11:55:40 PM
Nice ones Vicman. Really like the 8OT and the 881.Thanks David.
Post by: VICMAN on February 10, 2018, 11:56:38 PM
Forged USA tang stamp. I think these were made by Camillus for Craftsman.:like:
Post by: David on February 11, 2018, 03:42:48 PM
Post by: SteveC on February 11, 2018, 03:55:12 PM
Post by: VICMAN on February 11, 2018, 07:30:26 PM
Some PAL Cutlery Stockman and Cattle knives.Nice group of PAL knives David! :like: :tu: :tu:
Post by: David on February 11, 2018, 07:35:11 PM
Post by: VICMAN on February 11, 2018, 08:57:14 PM
Another GEC 66 Calf Roper.:like: :tu: :tu:
Post by: David on February 12, 2018, 07:22:48 PM
Post by: David on February 12, 2018, 07:34:47 PM
Post by: VICMAN on February 12, 2018, 07:55:06 PM
This Cattle knife has USA stamped on the mark side of the master blade. Dont know who made it. The spey blade has along pull and swedge.
That is a cool Cattle knife David! :like: :tu: :tu:
Post by: VICMAN on February 13, 2018, 07:07:53 PM
Post by: VICMAN on February 14, 2018, 12:10:59 AM
Post by: David on February 14, 2018, 12:24:38 AM
Post by: VICMAN on February 14, 2018, 12:42:26 PM
Nice ones Vicman. Really like the top Western. Is it a 658 or 742?Thanks David.
They are both 742's
Post by: David on February 15, 2018, 10:47:04 PM
Post by: VICMAN on February 15, 2018, 10:48:34 PM
Some Colonial Stockmans. Clock wise Ranger, Scrimshawed w/ Ranger tang stamp and an Anvil brand. :)Nice Colonials David! :like: :tu: :tu:
Post by: David on February 15, 2018, 10:56:01 PM
Post by: David on February 15, 2018, 10:56:46 PM
Post by: VICMAN on February 16, 2018, 12:13:11 AM
Colonial Cattle knife.:like: :tu: :tu:
Post by: SteveC on March 06, 2018, 06:42:05 PM
(https://i.imgur.com/5OVurqGh.jpg)
(https://i.imgur.com/Q3r7UX5h.jpg)
Post by: David on March 11, 2018, 05:42:25 PM
Post by: David on March 11, 2018, 05:46:47 PM
Post by: David on March 11, 2018, 05:57:48 PM
Post by: dks on April 13, 2018, 08:20:46 PM
Post by: VICMAN on April 13, 2018, 08:34:52 PM
This knife is 59 years old.
Click on the picture for best picture.
Post by: Dean51 on April 13, 2018, 08:53:01 PM
Post by: VICMAN on April 13, 2018, 09:26:33 PM
GEC
Nice GEC dks! :like: :tu: :tu:
Post by: VICMAN on April 13, 2018, 09:27:16 PM
Beautiful :drool:Thanks Dean! :like: :tu: :tu:
Post by: dks on April 14, 2018, 12:17:10 AM
Post by: SteveC on April 14, 2018, 12:28:46 AM
Post by: SteveC on April 14, 2018, 12:29:15 AM
My first good pocket knife was this Schrade-Walden large stockman in it's original box.
This knife is 59 years old.
Click on the picture for best picture.
Great old Timer ! :like: :cheers: :tu:
Post by: VICMAN on April 14, 2018, 12:37:14 AM
My first good pocket knife was this Schrade-Walden large stockman in it's original box.
This knife is 59 years old.
Click on the picture for best picture.
Great old Timer ! :like: :cheers: :tu:
Thanks Steve! :like: :tu: :tu:
Post by: nmpops on April 14, 2018, 02:24:29 AM
Post by: VICMAN on April 14, 2018, 03:31:19 PM
A couple favorites
Great pic nmpops! :like: :tu: :tu:
Post by: SteveC on April 14, 2018, 03:32:48 PM
A couple favorites
Nice OT's :like: :tu:
Post by: David on April 15, 2018, 02:56:48 AM
GEC
Those Cattle Barons are awesome! Wish GEC would do another run of them. :like:
My first good pocket knife was this Schrade-Walden large stockman in it's original box.
This knife is 59 years old.
Click on the picture for best picture.
Great classic!!! :like: verah much.
A couple favorites
Sweet! :like:
Post by: hiraethus on April 22, 2018, 11:32:30 PM
Post by: SteveC on April 27, 2018, 08:31:35 PM
Post by: SteveC on April 27, 2018, 08:31:44 PM
Post by: VICMAN on April 27, 2018, 08:54:46 PM
Nice Stockman Steve! :like: :tu: :tu:
Post by: SteveC on April 27, 2018, 08:58:36 PM
Post by: David on April 28, 2018, 11:12:46 PM
Post by: David on April 29, 2018, 12:52:45 AM
(https://i.imgur.com/7T5eeOrh.jpg)
Nice Stockman! :like:
Post by: SteveC on April 29, 2018, 01:25:18 AM
Post by: David on April 29, 2018, 01:46:47 AM
Post by: SteveC on April 29, 2018, 02:40:07 AM
Post by: David on April 29, 2018, 03:43:19 PM
Post by: David on April 29, 2018, 03:46:48 PM
Post by: SteveC on April 29, 2018, 03:48:55 PM
Post by: David on April 29, 2018, 03:57:47 PM
Post by: SteveC on April 29, 2018, 03:59:53 PM
Post by: nmpops on April 30, 2018, 03:53:03 AM
Post by: David on April 30, 2018, 05:50:39 AM
This is my all time favorite stockman, a Case 6375 American Workman.
Case's big boy Stockman! 8) :tu: :like: verah much!
Post by: VICMAN on April 30, 2018, 01:39:57 PM
This is my all time favorite stockman, a Case 6375 American Workman.
Nice Stockman nmpops! :like: :tu: :tu:
The Case large stockman is my favorite stockman too! :cheers:
Post by: SteveC on April 30, 2018, 02:01:40 PM
Post by: SteveC on August 16, 2018, 06:12:22 PM
(https://i.imgur.com/7T5eeOrh.jpg)
Post by: VICMAN on August 16, 2018, 06:20:38 PM
Camillus with Craftsman shield
Nice Camillus Steve! :like: :tu: :tu:
Post by: Barry Rowland on August 16, 2018, 10:58:09 PM
Post by: David on August 16, 2018, 11:57:02 PM
Camillus with Craftsman shield
(https://i.imgur.com/7T5eeOrh.jpg)
Good looking Stockman! :like:
Post by: pfrsantos on October 17, 2018, 01:10:23 PM
Colt, antler imitation scales. Very sharp, very confortable to use and carry. Prettier than it shows in the pic.
8) 8)
Post by: David on October 17, 2018, 03:28:40 PM
This is the only one I got (so far). It's hard to get these type of knives around here, without resorting to the interwebs...
Colt, antler imitation scales. Very sharp, very confortable to use and carry. Prettier than it shows in the pic.
8) 8)
Good looking Stockman! 8). :like:
Post by: SteveC on October 17, 2018, 03:52:53 PM
Post by: pfrsantos on October 17, 2018, 06:01:52 PM
:tu: :tu:
Post by: NutSAK on October 17, 2018, 06:35:41 PM
My grandfather's Schrade 897UH
(https://farm9.staticflickr.com/8545/28581104673_709bdc4c71_h.jpg)
GEC #66
(https://farm2.staticflickr.com/1844/29411096567_1d01acc746_h.jpg)
Case TB3139 CV
(https://farm9.staticflickr.com/8208/29081134670_2e780e97a2_h.jpg)
Case 3318PU CV
(https://farm2.staticflickr.com/1874/43650669385_1a84668db7_h.jpg)
Post by: toolguy on October 17, 2018, 07:24:21 PM
I feel remiss in not collecting this type of knife.
Congrats to all of the owners.
:like:
Post by: David on October 18, 2018, 10:14:04 PM
I believe there are only 4 Stockmans in my collection. Once I bought the Calf Roper, I was pretty satisfied that I wasn't going to find anything better. ;)
My grandfather's Schrade 897UH
(https://farm9.staticflickr.com/8545/28581104673_709bdc4c71_h.jpg)
GEC #66
(https://farm2.staticflickr.com/1844/29411096567_1d01acc746_h.jpg)
Case TB3139 CV
(https://farm9.staticflickr.com/8208/29081134670_2e780e97a2_h.jpg)
Case 3318PU CV
(https://farm2.staticflickr.com/1874/43650669385_1a84668db7_h.jpg)
Those are some real nice Stockmans Terry. The bone on the TB3139 is really sweet! :like:
Post by: NutSAK on October 18, 2018, 10:35:53 PM
Post by: David on October 18, 2018, 10:47:46 PM
Post by: SteveC on October 19, 2018, 01:05:21 AM
Post by: Dean51 on October 19, 2018, 01:41:23 AM
Some more Schrade Walden Peach Seed bone.
:dd: Peach Seed
Post by: SteveC on December 20, 2018, 10:28:41 PM
SW 856
(https://i.imgur.com/pmKCE6xh.jpg)
Post by: Dean51 on December 21, 2018, 12:54:43 AM
Post by: SteveC on January 12, 2019, 06:44:33 PM
(https://i.imgur.com/X3bSl9jh.jpg)
(https://i.imgur.com/mSo5tcsh.jpg)
Post by: Barry Rowland on January 15, 2019, 05:10:16 PM
Post by: Fuzzbucket on January 15, 2019, 05:31:45 PM
Wow, they're in phenomenal shape Steve!!
:iagree: :o
Post by: Barry Rowland on March 02, 2019, 06:34:53 AM
Post by: SteveC on March 02, 2019, 06:12:25 PM
(https://i.imgur.com/HtIZLBkh.jpg)
(https://i.imgur.com/zvKh8Kdh.jpg)
Post by: Jaypeebee on March 02, 2019, 08:11:19 PM
Utica Kutmaster
(https://i.imgur.com/HtIZLBkh.jpg)
(https://i.imgur.com/zvKh8Kdh.jpg)
Nice.... :like:
Post by: David on March 03, 2019, 11:07:26 PM
Utica Kutmaster
(https://i.imgur.com/HtIZLBkh.jpg)
(https://i.imgur.com/zvKh8Kdh.jpg)
Good looking Stockman! Nice bone covers. :like:
Post by: Barry Rowland on March 07, 2019, 03:17:26 PM
Post by: SteveC on March 26, 2019, 08:27:13 PM
(https://i.imgur.com/h8uc0azh.jpg)
Post by: SteveC on October 26, 2019, 05:33:37 PM
(https://i.imgur.com/p1LBAjAh.jpg)
(https://i.imgur.com/CihwHrRh.jpg)
Post by: SteveC on October 26, 2019, 05:43:00 PM
(https://i.imgur.com/XjiL9zSh.jpg)
Post by: David on October 26, 2019, 05:57:40 PM
Post by: VICMAN on October 26, 2019, 06:02:28 PM
Case 6347 HP
Nice stockman Steve! :like: :tu: :tu:
Post by: VICMAN on October 26, 2019, 06:02:55 PM
Group shot
Nice group shot Steve! :like: :tu: :tu:
Post by: SteveC on October 26, 2019, 06:37:50 PM
Post by: Rapidray on October 26, 2019, 07:37:40 PM
Group shotThats a nice collection you have there! :like: :cheers:
(https://i.imgur.com/XjiL9zSh.jpg)
Post by: Rapidray on October 26, 2019, 07:38:21 PM
Case 6347 HPVery very nice! :like: :cheers:
(https://i.imgur.com/p1LBAjAh.jpg)
(https://i.imgur.com/CihwHrRh.jpg)
Post by: Barry Rowland on October 27, 2019, 05:49:56 AM
Post by: PitCarver on October 27, 2019, 04:48:32 PM
Post by: David on October 27, 2019, 04:53:50 PM
This is the one of my CASE 75 pattern Large Stockman's that I chose to EDC.
:tu: :like:
Post by: SteveC on October 27, 2019, 05:00:06 PM
Post by: Rapidray on October 27, 2019, 09:33:50 PM
This is the one of my CASE 75 pattern Large Stockman's that I chose to EDC.Nice :like:
Post by: PitCarver on October 28, 2019, 11:53:14 AM
Post by: SteveC on January 21, 2020, 04:47:29 PM
Post by: SteveC on January 21, 2020, 04:48:20 PM
Post by: SteveC on January 21, 2020, 04:49:15 PM
(https://i.imgur.com/mfABAmxh.jpg)
Post by: Rapidray on January 21, 2020, 05:20:58 PM
Post by: David on January 22, 2020, 01:25:50 AM
Post by: SteveC on January 22, 2020, 05:55:21 AM
Post by: Fuzzbucket on January 25, 2020, 12:09:33 PM
(http://u.cubeupload.com/Fuzzbucket/83408912F6D14F55B404.jpeg)
(http://u.cubeupload.com/Fuzzbucket/6B8CD8C7A01E444D8241.jpeg)
Post by: SteveC on January 25, 2020, 01:55:12 PM
Post by: Rapidray on January 25, 2020, 04:02:22 PM
Another Calf Roper here :salute... along with a couple of Case 32s...Great post and photos - :like: :cheers:
(http://u.cubeupload.com/Fuzzbucket/83408912F6D14F55B404.jpeg)
(http://u.cubeupload.com/Fuzzbucket/6B8CD8C7A01E444D8241.jpeg)
Post by: David on January 26, 2020, 04:10:01 PM
Post by: SteveC on September 04, 2021, 06:38:42 PM
#67
(https://i.imgur.com/RoUoSYa.jpg)
(https://i.imgur.com/hYV11Jk.jpg)
(https://i.imgur.com/R1MPGht.jpg)
#68
(https://i.imgur.com/0hglOCkh.jpg)
(https://i.imgur.com/a0SMVsFh.jpg)
Post by: David on September 05, 2021, 12:18:26 AM
Post by: David on September 05, 2021, 12:20:51 AM
Post by: SteveC on September 06, 2021, 02:18:07 AM
Post by: SteveC on September 26, 2021, 09:04:46 PM
edit : and a Wards four blade Stockman
(https://i.imgur.com/bGVKR2Y.jpg)
Post by: David on September 27, 2021, 12:12:57 AM
Good pic pard! :like:
Post by: toolguy on September 27, 2021, 12:39:14 AM
All my Stockman's minus the Queen that's in my pocket ;)
edit : and a Wards four blade Stockman
(https://i.imgur.com/bGVKR2Y.jpg)
Very nice group there Steve!
Post by: GA1dad on September 27, 2021, 02:19:48 AM
Post by: Aloha on September 27, 2021, 05:17:58 AM
Its such a great pattern. Once of my favorites thats for sure.
Post by: SteveC on September 27, 2021, 05:34:15 AM
Post by: DavisNikolov on September 27, 2021, 01:41:47 PM
(https://i.postimg.cc/ryBMRNY8/DSC-0015.jpg)
(https://i.postimg.cc/v8gGmNhq/DSC-0021.jpg)
Post by: David on September 27, 2021, 03:52:13 PM
Post by: pfrsantos on September 27, 2021, 04:20:22 PM
I love the traditional pattern knives. I only have one stockman, will add more in the future for sure. Here are two action shots with my 6375 Large Stockman by Case - making a meatball soup.
(https://i.postimg.cc/ryBMRNY8/DSC-0015.jpg)
(https://i.postimg.cc/v8gGmNhq/DSC-0021.jpg)
Hum... curious about what that looks like after cooking...
:pok: :pok:
Post by: Aloha on September 27, 2021, 04:22:35 PM
Post by: DavisNikolov on September 27, 2021, 07:12:39 PM
Hum... curious about what that looks like after cooking...
:pok: :pok:
Well my pictures were taken few weeks back, I just remembered about them today when I saw this tread. So I can’t show you pictures of mine but it looks pretty much like the following photos I downloaded from the web
(https://i.postimg.cc/gcChZn7b/22-B37-C75-A975-4398-8-FA9-3-C36-FE35-CA6-A.jpg)
(https://i.postimg.cc/RZRJyGZv/BEA162-E9-A60-F-4-C91-BB88-086-D7-A2-C7-AC9.png)
Post by: Aloha on September 27, 2021, 07:16:16 PM
Post by: pfrsantos on October 07, 2021, 04:17:22 PM
Sweet ! :like: :tu:
Dude ! :gimme: :salute:
Post by: pfrsantos on October 07, 2021, 04:18:01 PM
:drool:
+1
:drool: :drool:
Post by: VICMAN on October 07, 2021, 06:12:55 PM
Some Stockmans. More later. :whistle: :D
Nice Stockman's David! :like: :tu: :tu:
Post by: VICMAN on October 07, 2021, 06:13:47 PM
All my Stockman's minus the Queen that's in my pocket ;)
edit : and a Wards four blade Stockman
Nice Stockman collection Steve! :like: :tu: :tu:
Post by: VICMAN on October 07, 2021, 06:15:32 PM
Post by: VICMAN on October 08, 2021, 12:44:54 AM
Post by: SteveC on October 08, 2021, 01:12:27 AM
Post by: VICMAN on October 08, 2021, 01:56:11 AM
Sweet collection Vman ! :tu:
Thank you Steve! :cheers:
Post by: David on October 08, 2021, 03:27:10 AM
Post by: VICMAN on October 08, 2021, 02:56:00 PM
Really nice collection of Stockmans Vman! :tu:
Thank you David! :cheers:
Post by: Aloha on October 08, 2021, 04:02:49 PM
Post by: VICMAN on October 09, 2021, 05:50:25 PM
Nice collection VICMAN. I really enjoy the pattern a lot. It makes a lot of sense even for us city folks.
Thank you Aloha! :cheers:
I agree!
Post by: VICMAN on October 09, 2021, 05:58:05 PM
Post by: David on October 09, 2021, 06:19:35 PM
Post by: VICMAN on October 09, 2021, 06:40:47 PM
Nice one Vman! :tu:
Thank you David! :cheers:
Post by: Fuzzbucket on October 23, 2021, 04:54:39 PM
(https://u.cubeupload.com/Fuzzbucket/F01967535E2C42B7BB73.jpeg)
Post by: SteveC on October 23, 2021, 05:58:21 PM
Post by: David on October 23, 2021, 06:15:39 PM
Depending on your definition of Stockmans - here's some of mine with some other Serpentine patterns - all Queen and Queen related...
(https://u.cubeupload.com/Fuzzbucket/F01967535E2C42B7BB73.jpeg)
That's a fine collection you have Fuzzy! :dd:
Post by: Fuzzbucket on October 24, 2021, 01:25:32 PM
Post by: David on October 24, 2021, 01:47:41 PM
Thanks fellas... thanks for feeding my addiction! :twak:... :ahhh
Reckon your welcome. Glad to be of service. Oh by the way you need a Queen 49 Stockman to round out your collection. Just thought I'd mention that while we were on the subject. :D
Post by: SteveC on October 24, 2021, 02:05:04 PM
Post by: Fuzzbucket on October 24, 2021, 05:32:50 PM
Reckon your welcome. Glad to be of service. Oh by the way you need a Queen 49 Stockman to round out your collection. Just thought I'd mention that while we were on the subject. :D
:rofl:
Funnily enough that is the next one I want to get... or a #61, but I'm not holding my breath with that one. Oy! Wait a minute...! :facepalm:
Post by: David on October 24, 2021, 06:28:01 PM
Funnily enough that is the next one I want to get... or a #61, but I'm not holding my breath with that one. Oy! Wait a minute...! :facepalm:
Might as well add a 37 Stockman as well. :tu: Oh wait I need one of those also. :ahhh :D
Post by: David on October 24, 2021, 06:57:52 PM
Post by: Fuzzbucket on October 24, 2021, 07:30:09 PM
Post by: VICMAN on October 24, 2021, 11:36:39 PM
Some more :)
Nice Stockman's David! :like: :tu: :tu:
Post by: SteveC on October 25, 2021, 12:02:15 AM
What's the one on the far right ?
Post by: toolguy on October 25, 2021, 12:45:03 AM
Some more :)
Holy cow David,you do find some nice old knives.I need to up my game.LOL
I've never warmed up to the Stockman platform but I did buy two just use them and see if I could take a liking to them.
This is a Case large Stockman with SS blades.I have one more with the classic Case pale yellow color with CS blades.
Post by: David on October 25, 2021, 05:00:53 PM
:iagree: :like: :tu:
What's the one on the far right ?
RAP Cutler made by Robert Anthony Paolantonio of the old Colonial Knife Company.
Post by: David on October 25, 2021, 05:04:40 PM
Post by: SteveC on January 16, 2022, 05:51:12 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on January 16, 2022, 07:20:53 PM
Post by: SteveC on January 21, 2022, 08:44:24 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: PitCarver on January 22, 2022, 04:03:43 AM
Holy cow David,you do find some nice old knives.I need to up my game.LOL
I've never warmed up to the Stockman platform but I did buy two just use them and see if I could take a liking to them.
This is a Case large Stockman with SS blades.I have one more with the classic Case pale yellow color with CS blades.
I've got that one too.
I've been a whittler guy for a long time but I really like stockman knives, but only the 4+ inch size.
Post by: David on January 22, 2022, 11:46:25 AM
Post by: David on January 22, 2022, 11:47:38 AM
Camillus Deluxe Stockman #69
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Really nice bone on that one! Still can see the etch. :tu:
Post by: SteveC on January 24, 2022, 05:38:45 AM
Post by: SteveC on January 27, 2022, 08:24:03 PM
Kutmaster Stockman
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: David on January 27, 2022, 10:40:54 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Awesome Cammie! :tu:
Just got this one in today
Kutmaster Stockman
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Thats a really fine Stockman! :like:
Post by: GA1dad on January 28, 2022, 12:48:07 AM
Just got this one in today
Kutmaster Stockman
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Yes indeed!!! Fine looking knife!!!!
Post by: DavisNikolov on February 10, 2022, 12:54:38 PM
The question is - which one. I know the best answer but I need to be more financially responsible these days so one at a time :D
I red somewhere that the 47 has 3 springs for the 3 blades but the guy was showing pictures of an old-ish knife. Is that still true for the present day 47s ? Also on the pictures I see, the 18 seems to have more pronounced curve on the back of the handle compared to the 47. Is that correct ?
And if some of you guys have both an 18 and 47 could you post a picture of them with a Mini Trapper or a 91 Victorinox for size reference ?
Post by: SteveC on February 13, 2022, 05:50:59 PM
.
Post by: David on February 14, 2022, 01:22:52 AM
Post by: GA1dad on February 14, 2022, 01:41:53 AM
Boker USA Small Stockman.
That's a beauty!!!
Post by: SteveC on April 30, 2023, 08:20:14 PM
Post by: nate j on May 01, 2023, 04:30:35 AM
I'm in the market for another Stockman (only one I have is Case 75 pattern) and thinking of another Case. I decided that this time I want round bolsters so this points at the 18 and the 47 patterns.Sorry I missed this when it was originally posted, but if you’re still looking for input, here it is:
The question is - which one. I know the best answer but I need to be more financially responsible these days so one at a time :D
I red somewhere that the 47 has 3 springs for the 3 blades but the guy was showing pictures of an old-ish knife. Is that still true for the present day 47s ? Also on the pictures I see, the 18 seems to have more pronounced curve on the back of the handle compared to the 47. Is that correct ?
And if some of you guys have both an 18 and 47 could you post a picture of them with a Mini Trapper or a 91 Victorinox for size reference ?
Current and recently manufactured 47s have three back springs. Once upon a time, 47s were made with two back springs. I believe the only two-spring 47 I have is from 1977. Perhaps the oldest of the three-spring 47s I have was made in 2013. Not sure exactly what year the change occurred, but if you’re buying a new knife from a dealer today, odds are excellent it will be a three-spring version.
I would say the curve is a bit more pronounced on the 18 than the 47.
Here’s (top to bottom) a 47, an 18, and a 91 mm Vic.
Post by: HarleyXJGuy on May 14, 2023, 03:08:43 AM
Well I new there was differences in the size of em like Large/Medium/Small but didn’t know about number and type of blade differences.
Post by: LoopCutter on May 15, 2023, 03:07:26 PM
Spey blades, substituted by a pen blade, or, the blades are positioned in differing positions.
Some manufactures place the Large blade in the middle, others the Sheepfoot blade.
I am and have been attracted to the Stockman pattern, a Camillus model 66 was my 1st that was a pawn shop find. Then inherited a Uncle Henry Staglon, from FnL. Just a tad shorter.
Then found two Buck 301s at a Gun/Knife Show.
Then wished I could find a Clip point/Sheeps foot model as the Spey blade was not needed daily. :woohoo: Then Buck introduced a new Buck of the Month. A Stockman, Micarta scales and 2 blades.
The chase never ends, be prepared to learn…
Post by: SteveC on May 15, 2023, 03:12:40 PM
Post by: SteveC on May 20, 2023, 01:53:37 AM
Henry Sears & Son
Post by: Aloha on May 20, 2023, 04:00:19 AM
Post by: Farmer X on May 20, 2023, 06:07:43 AM
Post by: David on May 23, 2023, 03:16:45 PM
Just got this one :tu:
Henry Sears & Son
Handsome Stockman! :like:
Post by: SteveC on May 24, 2023, 05:43:57 AM
Post by: SteveC on September 17, 2023, 05:24:53 PM
Post by: GA1dad on September 17, 2023, 06:24:11 PM
Post by: SteveC on February 04, 2024, 01:44:14 AM
Post by: PitCarver on February 04, 2024, 09:39:15 PM
Recently found this, on the eBay, to replace a YC Beaver Creek, that got lost.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Little bit nicer looking with the ringed bolsters than the BC but not on with the star shield.
Beggers can't be choosers.