-
Gerber was nice enough to send us a Center[Drive to give away... but it's not just any Center-Drive, this is the only Multitool.org Center-Drive in existence, and what's even cooler is that it could be YOURS!
(http://gallery.multitool.org/var/resizes/11th-Anniversary/Center-Drive/20170627_094802.jpg?m=1498573677)
What makes it a Multitool.org Edition Center-Drive? Well, as you can see, this is the full set up with sheath and bit set, so it's got all of the bases covered there... but wait.... is that something on the blade? I can see something through the cutouts... is it? Could it be?
I think...?
Maybe?
Yes.
Yes it smurfing well is!
(http://gallery.multitool.org/var/resizes/11th-Anniversary/Center-Drive/20170627_094829.jpg?m=1498573676)
The Multitool.org logo laser etched on the blade!
How cool is that? And, as I said, it is one of a kind!
And it could be yours!
But you are going to have to work for this one.... >:D
I have asked three Moderators a series of ten questions. I will ask one question here every day for the next ten days. Each of you will have about 24 hours to answer the question (only one answer per member, so consider your answer well!), and if your answer matches any one of the Moderators' answers then you get a point.
Each day when I ask a new question I will also post the results (points) from the previous day. At the end of ten days, the member with the most points wins. In the event of a tie we will do a tie breaker of some sort, because as I said, there's only one prize. And this is it:
(http://gallery.multitool.org/var/resizes/11th-Anniversary/Center-Drive/20170627_094838.jpg?m=1498573678)
Without wasting any further time, here is Question 1:
What is the one function you want to see most added to a multitool that isn't currently offered?
Def
-
I'll start the ball rolling then
I'd say, a component system multitool where you can add just the tools you want and easily replace any broken/damaged ones.
-
Cool give away boss! And thanks to Gerber for helping MTO out for it 11th anniversary.
-
Full size scissors.
-
Very cool prize and GAW, boss!
:salute: :tu:
Ok, thinking of every tool we've already seen in a MT, what's the one tool not yet currently offered?...
Easy peasy, you gave that answer already today: a tampon dispenser!
8) 8)
-
Light saber.
-
I know smurf about multitools, I'm a SAK guy.
:think:
Replaceable plier head?
-
Assuming were talking about plier based MTs, either:
1. Built in ratchet
2. Automatic center punch
3. Locking plier heads similar to knipex
4. Glass breaker
Sent from my iPhone using Tapatalk
-
Something cool indeed.
I'd say pocketclips. Too many MTs, not many pocketclips.
-
I know smurf about multitools, I'm a SAK guy.
:think:
Replaceable plier head?
Gerber made them, right?
Sent from my iPhone using Tapatalk
-
Lightsaber would rock but how about a place to store a headache pill, or allergic specific medicin.. Like one pill.. I would like that more than a ferro rod or extra bit..
It's not failure if you learn something from it
-
I know smurf about multitools, I'm a SAK guy.
:think:
Replaceable plier head?
Gerber made them, right?
Sent from my iPhone using Tapatalk
Really? Like I say, I know smurf. Which model? :think:
-
Assuming were talking about plier based MTs, either:
1. Built in ratchet
2. Automatic center punch
3. Locking plier heads similar to knipex
4. Glass breaker
Sent from my iPhone using Tapatalk
I thought the boss said one answer?
-
A OHO flag saying -----> :kirky:
-
I know smurf about multitools, I'm a SAK guy.
:think:
Replaceable plier head?
Gerber made them, right?
Sent from my iPhone using Tapatalk
Really? Like I say, I know smurf. Which model? :think:
Gerber Evolution 650 (MP650)
Sent from my iPhone using Tapatalk
-
I know smurf about multitools, I'm a SAK guy.
:think:
Replaceable plier head?
Gerber made them, right?
Sent from my iPhone using Tapatalk
Really? Like I say, I know smurf. Which model? :think:
Gerber Evolution 650 (MP650)
Sent from my iPhone using Tapatalk
I see. :cheers:
Its discontinued right? So its not currently offered? ;)
What is the one function you want to see most added to a multitool that isn't currently offered?
I'll stick with my answer for now. :drink:
-
Assuming were talking about plier based MTs, either:
1. Built in ratchet
2. Automatic center punch
3. Locking plier heads similar to knipex
4. Glass breaker
Sent from my iPhone using Tapatalk
I thought the boss said one answer?
I know... :facepalm:
Just throwing ideas around... My answers are based on priorities... Not worried about not getting points... Joining this awesome GAW challenge is rewarding enough :cheers: :drink:
Sent from my iPhone using Tapatalk
-
I know smurf about multitools, I'm a SAK guy.
:think:
Replaceable plier head?
Gerber made them, right?
Sent from my iPhone using Tapatalk
Really? Like I say, I know smurf. Which model? :think:
Gerber Evolution 650 (MP650)
Sent from my iPhone using Tapatalk
I see. :cheers:
Its discontinued right? So its not currently offered? ;)
What is the one function you want to see most added to a multitool that isn't currently offered?
I'll stick with my answer for now. :drink:
Yes it is discontinued... :cheers:
Sent from my iPhone using Tapatalk
-
In my opinion, a stand alone EDC multitool has to have scissors. I have to carry a SAK with most pliers based multitools because they lack that feature. The Rebar with scissors would cover just about anything I would need.
-
I'd like to see a Multitool (pliers based) with a Nail Clipper, like the Wenger or Vic one. :ahhh
-
A fish scaler!
-
I'd like a multitool...
... with a shrubbery!
NI! NI!
:SAKnight:
-
Great GAW Grant :ahhh That is one sweet MT :dd:
Great answers by everyone so far :like:
And good luck to one and all :popcorn: :D
-
Stylus for my iPhone, picture it your using your center drive as a rough neck with oil dripping off the tool and you stop whip out your stylus and check your Facebook post. Action movie in the making. :multi:
-
According to Grant's research, a tampon dispenser.
-
According to Grant's research, a tampon dispenser.
Choose another one, that's taken!
Show content
That's what I said!
:pok: :pok:
-
According to Grant's research, a tampon dispenser.
Choose another one, that's taken!
Show content
That's what I said!
:pok: :pok:
That's what he said.
-
multitool...
... with a shrubbery!
?
-
A "hook"
Sent from my iPhone using Tapatalk
-
multitool...
... with a shrubbery!
?
Nope, before that... Read all the posts!
:pok: :pok:
-
stop living in the past.....
-
This is a GAW that I REALLY want to win, so if I have to bribe someone, please PM me. ;P
I'm thinking that one of them will want a lobster claw cracker.
-
Another SAK guy here, so I guess I'm out. Still, thanks to Gerber for the generous give away. :cheers:
-
I'd like to see a solar powered cordless screwdriver :whistle:
-
Jaya_man already said it (I'm assuming your answer doesn't have to be unique): a ratchet.
Great GAW, thanks Gerber.
-
This is a GAW that I REALLY want to win, so if I have to bribe someone, please PM me. ;P
I'm thinking that one of them will want a lobster claw cracker.
Show content
(http://i.imgur.com/QCr3Sj3.gif)
-
Don't think I can join this as I'll be away next week, but here's a try: writing instrument (pen, sharpie etc.)
-
Yesterday's question is over- no more answers will be accepted for it, and it looks like we are only awarding two points on this question!
Ducttapetech - 1
Kottskrapa - 1
Today's question is:
What multitool would you carry in the Zombie Apocalypse?
Def
-
Cool! I got one!
My answer is a Surge.
-
new Schrade tough tool
-
SuperTool 300
Sent from my iPhone using Tapatalk
-
wenger ranger
-
SOG Power Lock. That huge, pointy plier head could be used to stab through zombie skulls.
-
Wow! Now I will at least have one point 😃
I think I would use a victorinox spirit x.. Pliers might come in handy
It's not failure if you learn something from it
-
A MUT?
-
MP600. It is a tank after all. ;)
-
Definitely a Surge.
-
I'd also go with the Surge, simply for raw dependability and tool density.
-
MP600
Sent from my iPhone using Tapatalk
-
Looks like I missed first day, and I'm not sure if I can participate everyday. But I'll play anyway...
What multitool would you carry in the Zombie Apocalypse?
Victorinox Swisschamp - because it has practically everything needed, and the most importantly: The Fish Scaler!
(Apocalypse or not, you gotta eat and in an event like that, fishing is probably most easiest source of food)
And a :tu: for a great giveaway! :D
-
Leatherman Charge
For it being OHO.
-
Leatherman Surge
-
I vote, and I'd carry, the ST300
:salute:
-
I'm gonna pander and say - a Center Drive!
-
Assuming the that you already have a heavy cutting tool like a machete, axe or tomahawk I'm going to have to go with team SAK on this.
A large model like the SwissChamp/S54 has the largest variety of usable tools without being so largest to be unwieldy in the hand. The big thing that you would sacrifice would be full size pliers which you can always scavenge an actual set of pliers.
So that is my answer a champion class SAK
SwissChamp/S54
-
Surge.
-
Yesterday's question is over- no more answers will be accepted for it, and it looks like we are only awarding two points on this question!
Ducttapetech - 1
Kottskrapa - 1
Today's question is:
What multitool would you carry in the Zombie Apocalypse?
Def
For real? A lightsaber? What muppets did you ask?
-
Yesterday's question is over- no more answers will be accepted for it, and it looks like we are only awarding two points on this question!
Ducttapetech - 1
Kottskrapa - 1
Today's question is:
What multitool would you carry in the Zombie Apocalypse?
Def
For real? A lightsaber? What muppets did you ask?
Good question...
-
If we are going with fictional tools mabey I should change my answer to a SonicScrewdriver, Blood of Heros or EndoSym Ironman....
But I will stick to SwissChamp
-
Yesterday's question is over- no more answers will be accepted for it, and it looks like we are only awarding two points on this question!
Ducttapetech - 1
Kottskrapa - 1
Today's question is:
What multitool would you carry in the Zombie Apocalypse?
Def
For real? A lightsaber? What muppets did you ask?
Good question...
Wasn't just me that thought that then :tu:
-
Yesterday's question is over- no more answers will be accepted for it, and it looks like we are only awarding two points on this question!
Ducttapetech - 1
Kottskrapa - 1
Today's question is:
What multitool would you carry in the Zombie Apocalypse?
Def
For real? A lightsaber? What muppets did you ask?
Good question...
Wasn't just me that thought that then :tu:
Not at all...
My initial answer was "a laser cutter" then I thought "be real dude"...
Should've sticked with that...
-
Yesterday's question is done, and Both Derekmac and Jaya_man are now on the scoreboard! The current scoring is:
Ducttapetech - 1
Kottskrapa - 1
DerekMac - 1
Jayaj_Man - 1
As you can see, it's anybody's game!
Today's question:
If your favorite multitool was available in any color you wanted, what color would you get?
Def
-
Black
-
red
-
Pink. 8)
-
Purple
-
Stayglow.. Or orange.. But I will go with stayglow
It's not failure if you learn something from it
-
British Racing Green 8)
-
Stainless
-
Sky blue pink with yellow dots
-
I'll have to with orange.
-
Green
-
Yesterday's question is done, and Both Derekmac and Jaya_man are now on the scoreboard! The current scoring is:
Ducttapetech - 1
Kottskrapa - 1
DerekMac - 1
Jayaj_Man - 1
As you can see, it's anybody's game!
Today's question:
If your favorite multitool was available in any color you wanted, what color would you get?
Def
This is a great game so far :tu: Congrats to those that have points and good luck to the rest of you guys :cheers: :like:
-
salmon
-
Coyote Tan with black tools.
Gotta think like a moderator, a moderator, a moderator! Oh that hurts!!!
Sent from my iPhone using Tapatalk
-
Coyote Tan with black tools.
Gotta think like a moderator, a moderator, a moderator! Oh that hurts!!!
Sent from my iPhone using Tapatalk
Handy hint: To think like a moderator, spend 6 days and nights in the desert. On the 6th night Brother Coyote and Sister Moon will come visit you - tell them you you want to think like an MTO moderator. Marie Laveau and Papa Legba will arrive at the next full moon and beat you round the head with dead crocodiles for 6 days and nights. Voila!
-
mine would be Orange
-
mine would be Orange
like this?
(https://uploads.tapatalk-cdn.com/20170709/448abaceec187f6a1322713a87aaf2c0.jpg)
Sent from my iPhone using Tapatalk
-
mine would be Orange
like this?
(https://uploads.tapatalk-cdn.com/20170709/448abaceec187f6a1322713a87aaf2c0.jpg)
Sent from my iPhone using Tapatalk
How is that variant called?
The Leatherman Wave Showoff? :whistle:
-
Coyote Tan with black tools.
Gotta think like a moderator, a moderator, a moderator! Oh that hurts!!!
Sent from my iPhone using Tapatalk
Handy hint: To think like a moderator, spend 6 days and nights in the desert. On the 6th night Brother Coyote and Sister Moon will come visit you - tell them you you want to think like an MTO moderator. Marie Laveau and Papa Legba will arrive at the next full moon and beat you round the head with dead crocodiles for 6 days and nights. Voila!
Alternatively just stop taking the tablets
-
Coyote tan
-
Denim. :ahhh
-
I like my tools to look like tools, not toys, so regular stainless is just fine with me so that is my answer.
Although, some tools look really good in red such as the Snap On version of the MP600, so... :think:
-
Yesterday's question is done, and Both Derekmac and Jaya_man are now on the scoreboard! The current scoring is:
Ducttapetech - 1
Kottskrapa - 1
DerekMac - 1
Jayaj_Man - 1
As you can see, it's anybody's game!
Today's question:
If your favorite multitool was available in any color you wanted, what color would you get?
Def
This is a great game so far :tu: Congrats to those that have points and good luck to the rest of you guys :cheers: :like:
+1!
-
When someone posts anything like Alan:
I like them in stainless but red does look good too.
Does this count as answer: stainless, red or both?
Just curious since I've seen answers like that before and points being awarded to them.
Is there actualy an answer limit?
-
coyote/fde
(pretty much the same)
-
When someone posts anything like Alan:
I like them in stainless but red does look good too.
Does this count as answer: stainless, red or both?
Just curious since I've seen answers like that before and points being awarded to them.
Is there actualy an answer limit?
I shall ask Brother Coyote and Sister Moon and get back to you. It will take me 6 days and nights in the desert though. Are you ok waiting?
-
When someone posts anything like Alan:
I like them in stainless but red does look good too.
Does this count as answer: stainless, red or both?
Just curious since I've seen answers like that before and points being awarded to them.
Is there actualy an answer limit?
My stated answer was stainless. I just commented, as an afterthought, that some tools do look good in red.
-
Stayglow, so I can find it easily.
-
Orange... easy to find when dropped or in the woods...
Sent from my iPhone using Tapatalk
-
When someone posts anything like Alan:
I like them in stainless but red does look good too.
Does this count as answer: stainless, red or both?
Just curious since I've seen answers like that before and points being awarded to them.
Is there actualy an answer limit?
I shall ask Brother Coyote and Sister Moon and get back to you. It will take me 6 days and nights in the desert though. Are you ok waiting?
If you lay off the pills it'll be only 6 hours...
-
Orange.
-
Orange... easy to find when dropped or in the woods...
Sent from my iPhone using Tapatalk
Unless it's 🍂 autumn :o
:D
-
Orange... easy to find when dropped or in the woods...
Sent from my iPhone using Tapatalk
Unless it's autumn :o
:D
Just two seasons here along the equator... :cheers:
Sent from my iPhone using Tapatalk
-
Yesterday's question is done! It looks like The Peacent, Kevin Davey and Corwyn have made it on the scoreboard, while DerekMac and Jaya_Man move ahead! The scores now look like this:
Ducttapetech - 1
Kottskrapa - 1
DerekMac - 2
Jaya_Man - 2
Kevin Davey - 1
The Peacent - 1
Corwyn - 1
Remember folks, you only get points if your answer matches one of the Mods' answers (or deemed to be close enough) and you only get one answer per question!
Today's question:
What is the one multitool you have always wanted but never got (at least not yet)?
Def
-
Victorinox spirit x has been on my list for eons!
It's not failure if you learn something from it
-
Holy smurf I never thought my answer would get anywhere close to getting a point :rofl:
-
Leatherman Charge TTi
-
LM Crunch!
-
LM Crunch!
You know nothing of the Crunch!
https://www.youtube.com/watch?v=B7he8OyuQdg
-
Leatherman Crunch is one I've wanted but not gottten so far, so hopefully a mod agrees with me. Unless they all have one. :think:
-
LM sideclip
-
Swiss tool X
-
I know I've wanted one for a while now, so I'm going to hope one of them wants one too.
Swisstool Sprit.
-
Holy smurf I never thought my answer would get anywhere close to getting a point :rofl:
:think:
:rofl:
-
Swisstooo Spirit. Just too expensive and hard to find here in the states
-
Victorinox Workchamp
-
Wenger Giant of course !!!
-
A first gen Soldier
-
The LM Crunch has so far eluded me.
-
I'd say Soldier/Standard Issue with a year stamp same as my birth year. :think:
-
I also gotta go with Spirit, as it's the quintessential, dream tool for most
-
Swiss Spirit
Sent from my iPhone using Tapatalk
-
Birthyear SI SAK
-
I feel like the answer is right in front of our noses :think:, so I'm going with Gerber center drive!!
-
I feel like the answer is right in front of our noses :think:, so I'm going with Gerber center drive!!
I nearly said that too, but changed my mind
-
SOG PowerAccess
Sent from my iPhone using Tapatalk
-
1. Built in ratchet
2. Automatic center punch
3. Locking plier heads similar to knipex
4. Glass breaker
Hey JM - Aren't 2 & 4 then same - Or wouldn't you make them the same ??
I guess 4 could be a small point on the end of a handle etc - Anyway don't we already have one of those in that new Skeletool and those Bokers?
PS. At least one of those mods is giving some crazy answers ....
At the moment don't we have a sky blue multitool with pink dots that has a light sabre tool inside ???
Guessers beware!! ;)
-
1. Built in ratchet
2. Automatic center punch
3. Locking plier heads similar to knipex
4. Glass breaker
Hey JM - Aren't 2 & 4 then same - Or wouldn't you make them the same ??
I guess 4 could be a small point on the end of a handle etc - Anyway don't we already have one of those in that new Skeletool and those Bokers?
PS. At least one of those mods is giving some crazy answers ....
At the moment don't we have a sky blue multitool with pink dots that has a light sabre tool inside ???
Guessers beware!! ;)
Huntsman, if they could be made the same so the better... Skeletool RX? Ahh just realized it.... Boker Plus Tech Tool? Yeah.., but my answers were assumed on plier based multi-tools... :cheers: :lol:
Sent from my iPhone using Tapatalk
-
Yesterday's question is complete now- and it looks like Kaput has joined the race!
The current scores are:
Ducttapetech - 1
Kottskrapa - 1
DerekMac - 2
Jaya_Man - 2
Kevin Davey - 1
The Peacent - 1
Corwyn - 1
Kaput - 1
Today's question is:
What is the reaction of people around you when you pull out your multitool to do something?
Good luck everyone!
Def
-
:sheeple:
-
Interest.
-
Amazed.
Sent from my iPhone using Tapatalk
-
My, what a large tool you have!
-
They look scared/shifty. ::)
(P.S Not including scouts or family)
-
no reaction - they are used to it
-
Roll their eyes or facepalm
-
"of course, there he goes fixing smurf again" :crash:
-
there are no people around me....
-
Tossing up between
'Oh no not again - Any excuse to pull out your tool' and 'Thank goodness you were here'
I'll go with the former.
-
Generally, they look at me like i have 3 heads.
Doesn't stop them from asking me to cut and fix stuff though
-
No reaction. 1st I am discreet about it and 2nd, most of them have seen them before.
-
I do not notice any reaction, none.
Sent from my iPhone using Tapatalk
-
if strangers - some looks, nothing said or done, plain observation
if family or friends - like nothing happened, they know me and what I carry and use often amongst them
-
"Why am I not surprised " is the most common reaction
It's not failure if you learn something from it
-
Curiosity.
-
Awesome tool - I got to fiddle with this at BLADE'17 this year and really liked it.
The Gerber reps were getting their knives ready for me to check out when I gravitated straight to this, lol.
-
'Hey is that a real Leatherman?"
-
Just stopping by to wish you all the best of luck. :salute:
-
Just stopping by to wish you all the best of luck. :salute:
With some of the pics I've seen here, that would be an appropriate reaction. Lol
Sent from my SM-G935W8 using Tapatalk
-
My answer is no reaction.
Sent from my SM-G935W8 using Tapatalk
-
Today's question is:
What is the reaction of people around you when you pull out your multitool to do something?
Good luck everyone!
Def
"ooh...you must have been a boy scout or something back in the day"
or something that sounds like "you're really a guy to own/carry/use one of those" to "you're really a Dad to own/use/carry" one of those.
*It's a local thing, I guess -- carrying an MT is a level up (in testosterone) from carrying a SAK. Must be due to the weight both in bulk and in price.
-
~
*It's a local thing, I guess -- carrying an MT is a level up (in testosterone) from carrying a SAK. Must be due to the weight both in bulk and in price.
A Classic was good when kids were small, then as they got older, a larger SAK or two became required to handle most repairs and fixes, now they are adults a plier MT is required, toys are bigger, plus now a SAK as they have kids as well, PawPaw fixes anything that needs fixin'.
Shucks, I carry a full tool kit with English / metric tools in pick up along with a bike rack to do the job no matter who I am visiting.
Sent from my iPhone using Tapatalk
-
Can we answer this question with a meme or gif? :D
-
Can we answer this question with a meme or gif? :D
Sure. :tu:
-
Can we answer this question with a meme or gif? :D
Sure. :tu:
(https://i.giphy.com/media/9b3Ye1iun8ipW/giphy.webp)
-
Can we answer this question with a meme or gif? :D
Sure. :tu:
(https://i.giphy.com/media/9b3Ye1iun8ipW/giphy.webp)
Broken link... :shrug:
-
looks fine to me...
-
(https://i.giphy.com/media/3o85g2cRAMwUTuPfGM/giphy.webp)
-
(http://www.netanimations.net/Dancing_Girl_in_white_pants.gif)
-
(http://www.picgifs.com/reaction-gifs/reaction-gifs/dance-party-hard/dance019.gif)
-
(https://media.giphy.com/media/l5EsRwUboYZby/giphy.gif)
-
cool gif,
(https://cdn.dribbble.com/users/43762/screenshots/1334778/dribbble---motion-bundle.gif)
-
I would like to have 12 mm open wrench on my MT for fastening springer air gun scope mount that loosens often.
-
What is the reaction of people around you when you pull out your multitool to do something?
Good luck everyone!
My answer is: Curiosity
Sometimes it's funny "...but for sure your tool don't have file/saw/scissors/philips etc." My answer is opening that tool adding "...and even glass cutter >:D"
(http://i.imgur.com/cyPBcWt.jpg)
-
Yesterday's question is done, and it has been the highest scoring one so far!
Ducttapetech - 2
Kottskrapa - 2
DerekMac - 3
Jaya_Man - 2
Kevin Davey - 1
The Peacent - 2
Corwyn - 1
Kaput - 1
Pablo O'Brien - 1
DKS - 1
50ft-trad - 1
Noa Isumi - 1
Huntsman - 1
sLaughterMed - 1
Alan K. - 1
LoopCutter - 1
DerekMac seems to be pulling ahead, but it is still anyone's game- we are only halfway through!
Today's question should have some interesting responses too:
What mutitool are you the least fond of? >:D
Def
-
I didn't get a single one right so far??
Wel that's a bummer...
I need to get every question right without anyone else who already scored a point getting one more.
Anyway, I'm man enough to admit my loss.
Best of luck to all :salute:
-
New Schrade Tough tool line ?
-
Swiss Spirit.
-
Skeletool
-
The Chinese Schrade Tough tools. I might drop a few bucks on an American made Tough tool one of these days, but I would pass on one of the new models.
-
Chinese knock-offs...
Sent from my iPhone using Tapatalk
-
any knock-offs :)
-
SOG PowerDuo
-
Leatherman REV is the least favorite of the tools I have.
Sent from my iPhone using Tapatalk
-
LM Juice
-
I am going to go with something that gave us weeks of entertainment as it proved itself completely useless and even too dangerous for use as anything other than a rifle target and then shrapnel
I think you all know the thread and vid I'm talking about....
Camillus Les Stroud Engage
thanks Lynn & Harley for the fun and destruction
-
Sak with backside Phillips.. We tried, we really did but the world was against us. We decided to just be friends but as we all know that never works. So we went separate ways and left it with that
It's not failure if you learn something from it
-
LM Juice
-
I quite like the tool myself - But my guess today is the Juice - Especially those new ones - There seems to be a lot of hate for that tool around here :(
-
Leatherman Freestyle, almost doesn't count as a multi-tool; pliers and half-serrated blade.
-
Yesterday's question is done, and it has been the highest scoring one so far!
Ducttapetech - 2
Kottskrapa - 2
DerekMac - 3
Jaya_Man - 2
Kevin Davey - 1
The Peacent - 2
Corwyn - 1
Kaput - 1
Pablo O'Brien - 1
DKS - 1
50ft-trad - 1
Noa Isumi - 1
Huntsman - 1
sLaughterMed - 1
Alan K. - 1
LoopCutter - 1
DerekMac seems to be pulling ahead, but it is still anyone's game- we are only halfway through!
Today's question should have some interesting responses too:
What mutitool are you the least fond of? >:D
Def
A great show g by several members now :salute: Good luck to all of you once again :like:
-
Hey I got a point! :woohoo:
I suppose my least favorite tool would be the SOG PowerDuo. Way too big, tools are too small, and build quality is terrible
-
Yesterday's question is done, and it has been the highest scoring one so far!
Ducttapetech - 2
Kottskrapa - 2
DerekMac - 3
Jaya_Man - 2
Kevin Davey - 1
The Peacent - 2
Corwyn - 1
Kaput - 1
Pablo O'Brien - 1
DKS - 1
50ft-trad - 1
Noa Isumi - 1
Huntsman - 1
sLaughterMed - 1
Alan K. - 1
LoopCutter - 1
DerekMac seems to be pulling ahead, but it is still anyone's game- we are only halfway through!
Today's question should have some interesting responses too:
What mutitool are you the least fond of? >:D
Def
A great show g by several members now :salute: Good luck to all of you once again :like:
Thanks Poncho!
-
They expect me to have a tool to solve problems so it's no reaction or "why did you take so long to solve this?"
:D :D
-
:ahhh :ahhh :ahhh :ahhh :ahhh
I'm going to have to say the BG Ultimate Survival Tool. If they haven't, I guarantee they will change their answers!! :rofl:
-
Chinese knock-offs...
Sent from my iPhone using Tapatalk
I'm with jaya man on this. Dangerous Potmetal Chinese Knockoffs. :ahhh
-
Mr. Pinchy?
-
I suppose my least favorite tool would be the SOG PowerDuo. Way too big, tools are too small, and build quality is terrible
Leatherman REV is the least favorite of the tools I have.
Guys - The question is not what is your least favourite tool - It's what would the moderators answer to that question .... :pok:
Unless you are saying that they would be in line with your thinking :D ;)
They expect me to have a tool to solve problems so it's no reaction or "why did you take so long to solve this?"
Errrrm - Isn't that an answer to the previous question :twak:
Anyway this is a really great and fun game / challenge Def - Nice one - Thanks
And a pretty nice prize too
Some great questions and some very interesting answers - Looking f to the next 5 (?)
-
Leatherman REV is the least favorite of the tools I have.
Guys - The question is not what is your least favourite tool - It's what would the moderators answer to that question .... :pok:
Unless you are saying that they would be in line with your thinking :D ;)
Ha Ha, I tried using someone else's preference and missed.
I said ST300, but no, it was MP600, my personal first thought.
I said Coyote Tan, my favorite is color is orange.
So, experience can be personal, and it just may be the same as a few others.
We maybe more alike in thought than we think ?!?!
Sent from my iPhone using Tapatalk
-
I don't like the apparence of Gerber MP800
-
It seems there are many more disliked multitools out there than expected, as none of the answers matched up, even by my loose judging standards! :ahhh
That means the points from yesterday stand unchanged:
Ducttapetech - 2
Kottskrapa - 2
DerekMac - 3
Jaya_Man - 2
Kevin Davey - 1
The Peacent - 2
Corwyn - 1
Kaput - 1
Pablo O'Brien - 1
DKS - 1
50ft-trad - 1
Noa Isumi - 1
Huntsman - 1
sLaughterMed - 1
Alan K. - 1
LoopCutter - 1
I am looking forward to today's answers! >:D
Which moderator is your favorite?
Def
-
Not certain who are all moderators, but since this place clicks do well, the best answer is all are favorites.
If must pick one, then Poncho65.
If he is actually a moderator, if not, maybe he should, or at least the MTO cheerleader;)
Sent from my iPhone using Tapatalk
-
That is easy! All of them :-)
It's not failure if you learn something from it
-
For me, there are 4 who stand out. I like them all, but four of them are just silly. I like that. But to take a guess who got asked and who she or he answered, I say Z Man.
-
The lobster guy. :P :cheers: :salute:
-
It seems there are many more disliked multitools out there than expected, as none of the answers matched up, even by my loose judging standards! :ahhh
That means the points from yesterday stand unchanged:
Ducttapetech - 2
Kottskrapa - 2
DerekMac - 3
Jaya_Man - 2
Kevin Davey - 1
The Peacent - 2
Corwyn - 1
Kaput - 1
Pablo O'Brien - 1
DKS - 1
50ft-trad - 1
Noa Isumi - 1
Huntsman - 1
sLaughterMed - 1
Alan K. - 1
LoopCutter - 1
I am looking forward to today's answers! >:D
Which moderator is your favorite?
Def
Just out of curiosity, what was the tool?
-
It seems there are many more disliked multitools out there than expected, as none of the answers matched up, even by my loose judging standards! :ahhh
That means the points from yesterday stand unchanged:
Ducttapetech - 2
Kottskrapa - 2
DerekMac - 3
Jaya_Man - 2
Kevin Davey - 1
The Peacent - 2
Corwyn - 1
Kaput - 1
Pablo O'Brien - 1
DKS - 1
50ft-trad - 1
Noa Isumi - 1
Huntsman - 1
sLaughterMed - 1
Alan K. - 1
LoopCutter - 1
I am looking forward to today's answers! >:D
Which moderator is your favorite?
Def
Just out of curiosity, what was the tool?
Or tools
-
So, we need to figure out which moderator the 3 moderators you questioned fancy the most?
-
Zoid seems to be the cutest
-
Zoid seems to be the cutest
Yeah, but so is Mags and Poncho.
-
I said cutest, with his boyish good looks, long blonde hair, sunkissed skin.......
Mag and Ponch are cute, but not model cute...
-
I said cutest, with his boyish good looks, long blonde hair, sunkissed skin.......
Mag and Ponch are cute, but not model cute...
Gotcha. You are right. I wasn't paying attention.
:rofl: :rofl: :rofl:
Why do I feel like I am gonna get banned. Again....
Speaking of, anybody heard from JD?
-
Poncho is my favorite.
-
Poncho, he brings a smile to my face at least once every day
-
Ponchie ;*
-
Magentus - same sense of humour as me :tu:
-
It is a trick question
The correct answer isn't just a normal mod
It is the king of this entire realm
and one mod to rule them all
Grant
edit seems I was editing my wording when magentus quoted me :facepalm:
-
It is a trick question
The correct answer isn't just a normal mod
It is the king of them
Grant
None of the mods are normal.
-
It is a trick question
The correct answer isn't just a normal mod
It is the king of them
Grant
None of the mods are normal.
That's for sure!
-
zoidberg for the win, Peter. Well. maybe just a point.
-
It is a trick question
The correct answer isn't just a normal mod
It is the king of them
Grant
None of the mods are normal.
That's for sure!
Grant is admin, the question said moderator
-
I honestly love all the mods here, so I had to assign numbers to them and use a random number generator since I couldn't pick just one.
Zoid's number came up, so that's who I'll pick.
Sent from my SM-G935W8 using Tapatalk
-
That is an unfair question. I can't choose between them. So, here is a picture of a rabbit with a pancake on its head.
-
:rofl:
-
My answer is all/no favourites, although Alan K's answer is better than mine :D
-
the question is not whom we like but, whom the other mods fancy... is Megan a mod :)
-
My buddy Poncho is the best mod.
the question is not whom we like but, whom the other mods fancy... is Megan a mod :)
:rofl:
-
I said cutest, with his boyish good looks, long blonde hair, sunkissed skin.......
Mag and Ponch are cute, but not model cute...
Hey I was model cute in my younger days :twak:
:dd:
:rofl:
-
My answer is all/no favourites, although Alan K's answer is better than mine :D
:salute: :like: :D
-
I said cutest, with his boyish good looks, long blonde hair, sunkissed skin.......
Mag and Ponch are cute, but not model cute...
Hey I was model cute in my younger days :twak:
:dd:
:rofl:
Pics or it didn't happen.
:rofl:
-
I said cutest, with his boyish good looks, long blonde hair, sunkissed skin.......
Mag and Ponch are cute, but not model cute...
Hey I was model cute in my younger days :twak:
:dd:
:rofl:
Pics or it didn't happen.
:rofl:
:doh: I mean err... all of those pics are on real film and my digital camera fell of the side of my boat :whistle: Yeah that's it ::) :D
-
I said cutest, with his boyish good looks, long blonde hair, sunkissed skin.......
Mag and Ponch are cute, but not model cute...
Hey I was model cute in my younger days :twak:
:dd:
:rofl:
Pics or it didn't happen.
:rofl:
:doh: I mean err... all of those pics are on real film and my digital camera fell of the side of my boat :whistle: Yeah that's it ::) :D
Nice save man....nice save...
:rofl:
-
So the moderator's favourite moderator - Right?
I think the boss is excluded otherwise I would have scored a point for my Giant suggestion ??? - I know he once said he wanted one!!
OK - Pluck one out of the air - Ponch
I think Megan is a great suggestion too dks ;) - But she has disappeared a bit
-
A very tough and tricky question... Hmmm
I can't choose between the mods... all of them are favourites...
Sent from my iPhone using Tapatalk
-
Im not gonna take the easy route out on this one so here's my simpleton reasoning.
You do have a good selection here for sure! :salute: All really good, but my favorite moding moderator goes to zoids super clean snub nose tools. :salute:
-
A OHO flag saying -----> :kirky:
Grant... I want to change my answer :rofl:
-
I am going to go with something that gave us weeks of entertainment as it proved itself completely useless and even too dangerous for use as anything other than a rifle target and then shrapnel
I think you all know the thread and vid I'm talking about....
Camillus Les Stroud Engage
thanks Lynn & Harley for the fun and destruction
As poor a tool it is, its destruction has endeared it to us :D
-
It is a trick question
The correct answer isn't just a normal mod
It is the king of them
Grant
None of the mods are normal.
Hey :twak:
That's for sure!
-
My buddy Poncho is the best mod.
the question is not whom we like but, whom the other mods fancy... is Megan a mod :)
:rofl:
Yeah, but he makes us other mods look bad... so we despise him! :D
-
Another big scoring day! We have a number of new faces on the board and some top positions have moved ahead as well!
Ducttapetech - 3
Kottskrapa - 2
DerekMac - 4
Jaya_Man - 2
Kevin Davey - 2
The Peacent - 3
Corwyn - 1
Kaput - 2
Pablo O'Brien - 2
DKS - 2
50ft-trad - 1
Noa Isumi - 1
Huntsman - 2
sLaughterMed - 1
Alan K. - 1
LoopCutter - 2
Reamerpunch - 1
IvanDrago - 1
Lichan - 1
Looks like DerekMac is the one to beat- he said he wanted it and he's making it happen!
But, with three more questions, including today's, anyone currently on the board has the ability to defeat him!
Here's today's question, and remember, your answers need to match the Moderator's Answers! :pok:
If you could have an hour long chat with anyone in the Multitool Industry, who would it be and what would you ask them?
Good luck everyone!
Def
-
Tim Leatherman.
What would he change and does he have any new designs himself?
-
Please don't beat me, I'm just a poor nice lonely Canadian!
:rofl:
Tim Leatherman. I'd ask him if there's any part of the company he'd change now.
-
Please don't beat me, I'm just a poor nice lonely Canadian!
:rofl:
Tim Leatherman. I'd ask him if there's any part of the company he'd change now.
Don't worry. I am just playing to play. I love games like this during the MTO anniversaries.
Best of luck Dmac and to everyone else.
-
I'm torn between asking Les Stroud what it feels like to have endorsed one of the most embarassingly pathetic multitools of the last 10 years, and whether the payout was worth being totally discredited and becoming an international laughing stock,
or
asking Tim Leatherman at what point in his mind, did they peak in terms of dedication to tool quality, and decide to start compromising tool integrity as cost savimg exercises to boost sales and protect margins.
:think:
I'll go with Leatherman :tu:
-
My buddy Poncho is the best mod.
the question is not whom we like but, whom the other mods fancy... is Megan a mod :)
:rofl:
Yeah, but he makes us other mods look bad... so we despise him! :D
:ahhh :ahhh :ahhh
-
This game is looking great guys :tu: :like: :like:
-
Tim leatherman - ask about development of a wave sized mini surge and a titanium version of the surge.
-
This game is looking great guys :tu: :like: :like:
+1! Good luck everyone! :cheers:
-
Tim Leatherman .
Ask: any proper multitools coming out?
-
Carl Elsener Jr. ... I'd ask him how we here at MTO can help Victorinox improve and come up with awesome products and suggest ground breaking ideas. It would a shame to waste abundant talent and resources we have available...
Sent from my iPhone using Tapatalk
-
Carl Elsener Jr... I would ask him why Victorinox hasn't done anything like syph has done on a shoe string budget...
Also why Victorinox has done what it did in the last half century. Like why Grey mag to clear mag? Why drop the bottle opener scraper? Etc. Inquiring minds what to know!
-
Carl Elsener Jr. - ask if he has any second thoughts about taking over Wenger and then burying the only source of real creativity in the SAK industry and why he didn't keep at least some of their designers/engineers to breathe some new life into Victorinox. At some point combinations and permutations of the same set of tools bogs down growth.
-
Def - These are really great questions - Well done mate - And promoting some very intersting debate
And I gotta say Derek, 50', dks, lichan, pablo and probably evryone else so far for this question.
Good questions - But - Harsh, Harsh, Harsh - And ..... these questions have to be asked.
So for me and I'm going to give my answer this time - So no second guessing the mods - And not so harsh
But I gotta ask Tim - The MT father.
"Was there any time during that 1977-1983 period, after dozens of prototypes and failures, and dearth of customers, that you felt like packing it all in?"
Note to us - And if he had ...... Our world as we know it - i.e. MTo etc etc - would not exist :o
And of course for the next hour ...... all the follow on chat about how it all panned out given that he did not give up :D
-
I would ask Carl Elsener if they have ever been the thinking of the possibility to custom order a SAK or at least have some option on which tools you want in it. And if they have, why that never became reality
It's not failure if you learn something from it
-
Tim Leatherman -
Why does the Rebar tool not have a date code marking inside the handles?
This drives me nuts.
2. Does he prefer hard cider to beer?
3. And, last how much did his last name contribute to the success of his business?
The remaining 45 minutes, enjoy his favorite beverage.
Sent from my iPhone using Tapatalk
-
I'd ask Tim Leatherman what his favorite SAK is. :)
-
Tim for me as well, he was so nice when I met him and I'd ask all the questions I couldn't the last time...
- Did you ever think of making non-plier based multitools? (ala SAK)
- How do you see the future of Multitools? Directions it'll take?
- What's the best/most moving story someone told you about your tools? (saved a life, got someone out of a fire, etc.)
and a couple hundred more :D
-
Again, we need to think Who the 3 selected mods would like to meet, and, What questions They would like to ask..
You need to think like an MTO mod, so I suggest consuming some alcohol first....
-
Again, we need to think Who the 3 selected mods would like to meet, and, What questions They would like to ask..
You need to think like an MTO mod, so I suggest consuming some alcohol first....
And the stuff that makes you see rainbow unicorns. :whistle:
-
Again, we need to think Who the 3 selected mods would like to meet, and, What questions They would like to ask..
You need to think like an MTO mod, so I suggest consuming some alcohol first....
And the stuff that makes you see rainbow unicorns. :whistle:
LOL, you don't have to drink anything to see rainbow unicorns, silly.
-
Tim Leatherman, and I'd ask why does Leatherman insist on making every tool with needle nose pliers and not even offer blunt nosed versions as an option.
-
Again, we need to think Who the 3 selected mods would like to meet, and, What questions They would like to ask..
You need to think like an MTO mod, so I suggest consuming some alcohol first....
And the stuff that makes you see rainbow unicorns. :whistle:
LOL, you don't have to drink anything to see rainbow unicorns, silly.
Yeah duh that is totally natural....right ???
:D
-
This is how the list stands now :cheers: Grant asked one of us to take this over for a day or two and I drew the short straw :facepalm: :D I think I got everyone a point that was suppose to have one :D Dmac is still the guy to beat but with a few right on his heels :cheers:
Ducttapetech - 4
Kottskrapa - 3
DerekMac - 5
Jaya_Man - 3
Kevin Davey - 3
The Peacent - 4
Corwyn - 1
Kaput - 2
Pablo O'Brien - 3
DKS - 3
50ft-trad - 2
Noa Isumi - 1
Huntsman - 3
sLaughterMed - 1
Alan K. - 2
LoopCutter - 3
Reamerpunch - 2
IvanDrago - 1
Lichan - 2
Now to question 9 :ahhh
Red wire or Blue wire? :D
-
I can't believe I got to three points! :ahhh
:facepalm:
This is going to be one of THOSE questions isn't it? :rofl:
Red wire.
-
Blue. :think:
-
The red wire, it's always the red wire.
-
Red wire
Sent from my iPhone using Tapatalk
-
Blue wire.
-
Red Wire - bomb disposal days always go with the red, unless white, green or purple are present ;)
Sent from my iPhone using Tapatalk
-
The MTO way .... if in doubt, cut both >:D :D :D
-
Good thing the bomb maker was not a woman...
-
Good thing the bomb maker was not a woman...
:o
:rofl:
-
definitely RED, it's SAKs color
-
MacGyver says it is always the red wire! So that is my answer
It's not failure if you learn something from it
-
Blue
-
REDRUM.
I mean Red Wire.
This is going to be a close finish!!! :ahhh :ahhh :ahhh
-
blue, as it is more erotic...
-
blue, as it is more erotic...
I don't know...
The red tender skin resulting from using a riding crop... :dd:
-
red skin on a pale white female.... tourist on the beach... my main hobby.. :)
-
I have no chance of winning, but... why not both?
On a related note, why don't we have a "why not both" smiley yet? or "por que no los dos?"
-
Purple!
:D :D :D :D
-
Purple!
:D :D :D :D
So would you consider that as both :pok: :D
-
Purple!
:D :D :D :D
So would you consider that as both :pok: :D
Not necessarilly...
Show content
What if I told you there is no wire?...
:whistle:
-
red wire
red wine --> blue mood
...or mod maybe
:drink:
-
An in-line adjustable wrench capable of expanding from 1/8" to a full 1" with material integrity.
&
A jar opener! :D MTs have bottle openers, can openers, cork openers, letter openers, box openers, car window openers (glass breaker), but when has a multitool ever helped opening up a stuck jar lid? Jam jars come to mind, or the pickle jar when you're making a sammich with the Flair, or someone hands you a jar and you find your muscles bulging in your arms and the stupid lid doesn't take the hint? :ahhh
-
An in-line adjustable wrench capable of expanding from 1/8" to a full 1" with material integrity.
&
A jar opener! :D MTs have bottle openers, can openers, cork openers, letter openers, box openers, car window openers (glass breaker), but when has a multitool ever helped opening up a stuck jar lid? Jam jars come to mind, or the pickle jar when you're making a sammich with the Flair, or someone hands you a jar and you find your muscles bulging in your arms and the stupid lid doesn't take the hint? :ahhh
Umm what? :think:
-
An in-line adjustable wrench capable of expanding from 1/8" to a full 1" with material integrity.
&
A jar opener! :D MTs have bottle openers, can openers, cork openers, letter openers, box openers, car window openers (glass breaker), but when has a multitool ever helped opening up a stuck jar lid? Jam jars come to mind, or the pickle jar when you're making a sammich with the Flair, or someone hands you a jar and you find your muscles bulging in your arms and the stupid lid doesn't take the hint? :ahhh
Umm what? :think:
I think Outback is a day or 2 behind on the questions :whistle:
:rofl:
-
Only found the post today, so was answering question #1. Some folks work 2 jobs and don't have time to live in every forum. :pok: Whether or not it's accepted, I still stand by it.
-
I'll go for blue
Yes OBiI - I accept your suggestion :tu: - Great idea :o
This is going to be a close finish - as long as no-one catches me !!! :ahhh :ahhh :ahhh
FTFY ;)
-
Only found the post today, so was answering question #1. Some folks work 2 jobs and don't have time to live in every forum. :pok: Whether or not it's accepted, I still stand by it.
You didn't read the directions to close before question 1 then :whistle:
Plus being gone 13-14 hours a day from home for my one job doesn't leave much time for a 2nd one ::)
They are daily questions and expire after 24 hours ;)
-
What multitool would you carry in the Zombie Apocalypse?
KHHI Scourge + LM Surge
If your favorite multitool was available in any color you wanted, what color would you get?
perditious purple
What is the one multitool you have always wanted but never got (at least not yet)?
LM MUT or Signal, still undecided which is more awesome
What is the reaction of people around you when you pull out your multitool to do something?
Do you always carry that thing? Usually when invited over to dinner, I whip out the Charge TTi's blade and the guy's wife has a fit. She insists I use her dull steak knives...
What mutitool are you the least fond of?
The one that isn't with me when I need it! :ahhh Work rules are STUPID. Stupid people should not be making up rules.
Which moderator is your favorite?
Grant, he has no ego issues to prove.
If you could have an hour long chat with anyone in the Multitool Industry, who would it be and what would you ask them?
Tim Leatherman: Why haven't you put a blasted AWL in the Charge or Wave series already? And when is Leatherman going to make a mini-Surge?!?
Red wire or Blue wire?
Yellow. Stupid question, the other wires are rigged, duh!
Know am late on them, but answered them anyhow. :P
-
I'll go for blue
Yes OBiI - I accept your suggestion :tu: - Great idea :o
This is going to be a close finish - as long as no-one catches me !!! :ahhh :ahhh :ahhh
FTFY ;)
:D
-
What multitool would you carry in the Zombie Apocalypse?
KHHI Scourge + LM Surge
If your favorite multitool was available in any color you wanted, what color would you get?
perditious purple
What is the one multitool you have always wanted but never got (at least not yet)?
LM MUT or Signal, still undecided which is more awesome
What is the reaction of people around you when you pull out your multitool to do something?
Do you always carry that thing? Usually when invited over to dinner, I whip out the Charge TTi's blade and the guy's wife has a fit. She insists I use her dull steak knives...
What mutitool are you the least fond of?
The one that isn't with me when I need it! :ahhh Work rules are STUPID. Stupid people should not be making up rules.
Which moderator is your favorite?
Grant, he has no ego issues to prove.
If you could have an hour long chat with anyone in the Multitool Industry, who would it be and what would you ask them?
Tim Leatherman: Why haven't you put a blasted AWL in the Charge or Wave series already? And when is Leatherman going to make a mini-Surge?!?
Red wire or Blue wire?
Yellow. Stupid question, the other wires are rigged, duh!
Know am late on them, but answered them anyhow. :P
It is fine that you answered them :tu:
Just lighten up :pok: :D
-
What multitool would you carry in the Zombie Apocalypse?
KHHI Scourge + LM Surge
If your favorite multitool was available in any color you wanted, what color would you get?
perditious purple
What is the one multitool you have always wanted but never got (at least not yet)?
LM MUT or Signal, still undecided which is more awesome
What is the reaction of people around you when you pull out your multitool to do something?
Do you always carry that thing? Usually when invited over to dinner, I whip out the Charge TTi's blade and the guy's wife has a fit. She insists I use her dull steak knives...
What mutitool are you the least fond of?
The one that isn't with me when I need it! :ahhh Work rules are STUPID. Stupid people should not be making up rules.
Which moderator is your favorite?
Grant, he has no ego issues to prove.
If you could have an hour long chat with anyone in the Multitool Industry, who would it be and what would you ask them?
Tim Leatherman: Why haven't you put a blasted AWL in the Charge or Wave series already? And when is Leatherman going to make a mini-Surge?!?
Red wire or Blue wire?
Yellow. Stupid question, the other wires are rigged, duh!
Know am late on them, but answered them anyhow. :P
It is fine that you answered them :tu:
Just lighten up :pok: :D
So which wire turns the lights on, the red or the blue? :think:
-
Tim Leatherman -
Why does the Rebar tool not have a date code marking inside the handles?
This drives me nuts.
2. Does he prefer hard cider to beer?
3. And, last how much did his last name contribute to the success of his business?
The remaining 45 minutes, enjoy his favorite beverage.
Sent from my iPhone using Tapatalk
The stamped numbers showed through the thinner handles so they stopped dating them.
-
Just lighten up :pok: :D
Am trying, been on a diet for 3 years now. :D
-
Just lighten up :pok: :D
Am trying, been on a diet for 3 years now. :D
It gets me after a week :ahhh :ahhh :ahhh
-
Red Wire.
-
Red wire. It's funner
-
Just lighten up :pok: :D
Am trying, been on a diet for 3 years now. :D
I've heard the coffee and beer diet is the way to go now. :D
-
Well folks things just got more interesting :o DTT just moved up to first place with DMac :ahhh :D and we have a 3 others right behind them :sa: Plus a couple new names on the board :cheers:
Ducttapetech - 5
Kottskrapa - 3
DerekMac - 5
Jaya_Man - 3
Kevin Davey - 4
The Peacent - 4
Corwyn - 1
Kaput - 2
Pablo O'Brien - 3
DKS - 4
50ft-trad - 3
Noa Isumi - 1
Huntsman - 3
sLaughterMed - 2
Alan K. - 2
LoopCutter - 3
Reamerpunch - 3
IvanDrago - 1
Lichan - 2
prfsantos - 1
Outback in Idaho - 1
Question 10 (final question guys :ahhh )
10- Pliers are now illegal- how screwed are you? :D
Good luck to everyone :tu:
-
Very screwed...
Sent from my iPhone using Tapatalk
-
Not particularly
-
Not at all screwed as far as pliers are concerned.
Too far behind to catch up, but it's been fun. :tu:
-
Very smurfed.
-
Depends on if your a Leatherman or SAK type guy?
But I'd say very to extremely...
-
Stubbify them then :D
-
Totally screwed - up smurf creek without a plier :D
-
I'd be just fine!
8) 8)
Show content
Huh... what are these "pliers" you mentioned?...
:think: :think:
-
Pliers? I don't use 'em. :rofl:
-
do claws count as pliers?
very screwed...
-
Pliers? I don't use 'em. :rofl:
I'd be just fine!
8) 8)
Show content
Huh... what are these "pliers" you mentioned?...
:think: :think:
I think it's a trick question :think: if you answer you don't need pliers, you don't win the point, getting you no closer to a PLIER based multitool ;)
I figured it out :rofl:
But, I guess those folks won't be missing out if you really think about it :think: :pok: wow. That was philosophical for a Saturday morning...
-
Pliers? I don't use 'em. :rofl:
I'd be just fine!
8) 8)
Show content
Huh... what are these "pliers" you mentioned?...
:think: :think:
I think it's a trick question :think: if you answer you don't need pliers, you don't win the point, getting you no closer to a PLIER based multitool ;)
I figured it out :rofl:
But, I guess those folks won't be missing out if you really think about it :think: :pok: wow. That was philosophical for a Saturday morning...
Saturday?
-
:ahhh :ahhh I can't take the stress!! :ahhh :ahhh
Good luck Nate!
My answer is not screwed.
Hopefully my answer doesn't screw me!! :dwts:
-
Not at all. I use screwdrivers for screws..
It's not failure if you learn something from it
-
Unscrewed, since I have no pliers to screw any bolts.
Yes, decided to answer the final question just for gigs. :whistle:
-
I am not, as I am not using pliers, I am using a MULTITOOL! At minimum a wire cutter.
Sent from my iPhone using Tapatalk
-
:ahhh :ahhh I can't take the stress!! :ahhh :ahhh
Good luck Nate!
My answer is not screwed.
Hopefully my answer doesn't screw me!! :dwts:
Good luck D Mac!
-
can do without them, it's not ideal but I can improvise or find other ways to tighten, twist, bend or grab
:salute:
-
Very, very screwed. :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh
-
^ Alan gets it :D
-
can do without them, it's not ideal but I can improvise or find other ways to tighten, twist, bend or grab
:salute:
That's so what she said!
:D :D :D :D
-
Very screwed.
-
Hmmm, I'm thinking my answer will screw me. :cry: :cry: :cry:
-
Hmmm, I'm thinking my answer will screw me. :cry: :cry: :cry:
I hope not. I am pulling for you. Best of luck!
-
Hmmm, I'm thinking my answer will screw me. :cry: :cry: :cry:
I hope not. I am pulling for you. Best of luck!
Cthulhu has your back Derek. And your soul. :tu:
-
Hmmm, I'm thinking my answer will screw me. :cry: :cry: :cry:
I hope not. I am pulling for you. Best of luck!
Cthulhu has your back Derek. And your soul. :tu:
Oh, D Mac signed the contract?
-
Hmmm, I'm thinking my answer will screw me. :cry: :cry: :cry:
I hope not. I am pulling for you. Best of luck!
Cthulhu has your back Derek. And your soul. :tu:
Oh, D Mac signed the contract?
He thought he was signing up for a free course of STD medication but he didn't read the small print MWAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
-
I did what now?? :ahhh :ahhh :ahhh
Sent from my SM-G935W8 using Tapatalk
-
Hmmm, I'm thinking my answer will screw me. :cry: :cry: :cry:
I hope not. I am pulling for you. Best of luck!
Cthulhu has your back Derek. And your soul. :tu:
Oh, D Mac signed the contract?
He thought he was signing up for a free course of STD medication but he didn't read the small print MWAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
MHAHAHAHAHA!!!
-
Shhhhh, hush now little one. Uncle Cthulhu will make everything ok again.
-
Welcome to Chaos D Mac!
-
Nothing in your life will EVER BE THE SAME AGAIN!!!! MWAHAHAHAHAHAHAHAHAHA :ahhh
-
Well, it appears that we have a two way tie, between Derek and Nate!
Congratulations guys, but as there is only one prize we can only have one winner.
(https://cdn.meme.am/cache/instances/folder727/500x/51755727/highlander-quick-there-can-be-only-one.jpg)
How do we break this tie?
My first thought was a fight to the death, but it just seemed like too much effort to find a venue, get the plane tickets, promote the event as a Pay Per View and have to explain to either of your families that you were killed in a no holds barred fight to the finish over a set of really cool pliers, so instead I flipped a coin.....
Show content
over and over again as a distraction until I was able to come up with a proper method of determining a winner!
I will ask one more question, and the first one of you to get it right will win- but, here's the catch, you can only answer one at a time! Each time you answer, you will have to wait for the other to post an answer before you can try again!
The question is:
What tool is on my 10th Anniversary Multitool.org Backpack?
Congratulations to the winner!
Def
-
The remains of THAT Les Stroud Multitool? :o
Hey, a mans gotta try! :whistle:
-
:o A tie :ahhh
Well good luck to both Dmac and DTT :salute:
May the best guesser win :salute: :like:
-
:ahhh More stress! :ahhh
I'm going to guess a CRKT Eatin Tool.
Sent from my SM-G935W8 using Tapatalk
-
This'll be interesting seeing as one has the ear of Khorne (see what I did there?), and the other is a recent convert to Chaos.
I'll eat some popcorn and listen to some Napalm Death to see how this unfolds. Good luck Gents :popcorn:
-
Well, it appears that we have a two way tie, between Derek and Nate!
Congratulations guys, but as there is only one prize we can only have one winner.
(https://cdn.meme.am/cache/instances/folder727/500x/51755727/highlander-quick-there-can-be-only-one.jpg)
How do we break this tie?
My first thought was a fight to the death, but it just seemed like too much effort to find a venue, get the plane tickets, promote the event as a Pay Per View and have to explain to either of your families that you were killed in a no holds barred fight to the finish over a set of really cool pliers, so instead I flipped a coin.....
Show content
over and over again as a distraction until I was able to come up with a proper method of determining a winner!
I will ask one more question, and the first one of you to get it right will win- but, here's the catch, you can only answer one at a time! Each time you answer, you will have to wait for the other to post an answer before you can try again!
The question is:
What tool is on my 10th Anniversary Multitool.org Backpack?
Congratulations to the winner!
Def
Wow!
But I have an answer that D Mac will love.
You win buddy! Like I said earlier, I was playing just to play. If it is ok with the Boss and the mods?
-
This'll be interesting seeing as one has the ear of Khorne (see what I did there?), and the other is a recent convert to Chaos.
I'll eat some popcorn and listen to some Napalm Death to see how this unfolds. Good luck Gents :popcorn:
:rofl: :rofl:
-
Well, it appears that we have a two way tie, between Derek and Nate!
Congratulations guys, but as there is only one prize we can only have one winner.
(https://cdn.meme.am/cache/instances/folder727/500x/51755727/highlander-quick-there-can-be-only-one.jpg)
How do we break this tie?
My first thought was a fight to the death, but it just seemed like too much effort to find a venue, get the plane tickets, promote the event as a Pay Per View and have to explain to either of your families that you were killed in a no holds barred fight to the finish over a set of really cool pliers, so instead I flipped a coin.....
Show content
over and over again as a distraction until I was able to come up with a proper method of determining a winner!
I will ask one more question, and the first one of you to get it right will win- but, here's the catch, you can only answer one at a time! Each time you answer, you will have to wait for the other to post an answer before you can try again!
The question is:
What tool is on my 10th Anniversary Multitool.org Backpack?
Congratulations to the winner!
Def
Wow!
But I have an answer that that D Mac will love.
You win buddy! Like I said earlier, I was playing just to play. If it is ok with the Boss and the mods?
What a Gent! Chaos wins the day! Souls for the Reaper! Not a bad day for Dmac - signs his soul away but wins a Centredrive! Even Stevens.
-
Well, it appears that we have a two way tie, between Derek and Nate!
Congratulations guys, but as there is only one prize we can only have one winner.
(https://cdn.meme.am/cache/instances/folder727/500x/51755727/highlander-quick-there-can-be-only-one.jpg)
How do we break this tie?
My first thought was a fight to the death, but it just seemed like too much effort to find a venue, get the plane tickets, promote the event as a Pay Per View and have to explain to either of your families that you were killed in a no holds barred fight to the finish over a set of really cool pliers, so instead I flipped a coin.....
Show content
over and over again as a distraction until I was able to come up with a proper method of determining a winner!
I will ask one more question, and the first one of you to get it right will win- but, here's the catch, you can only answer one at a time! Each time you answer, you will have to wait for the other to post an answer before you can try again!
The question is:
What tool is on my 10th Anniversary Multitool.org Backpack?
Congratulations to the winner!
Def
Wow!
But I have an answer that that D Mac will love.
You win buddy! Like I said earlier, I was playing just to play. If it is ok with the Boss and the mods?
What a Gent! Chaos wins the day! Souls for the Reaper! Not a bad day for Dmac - signs his soul away but wins a Centredrive! Even Stevens.
Its a win/win! I hope you enjoy it Dmac as much as I have enjoyed the game and I better see some cool pics! :salute:
-
Well, it appears that we have a two way tie, between Derek and Nate!
Congratulations guys, but as there is only one prize we can only have one winner.
(https://cdn.meme.am/cache/instances/folder727/500x/51755727/highlander-quick-there-can-be-only-one.jpg)
How do we break this tie?
My first thought was a fight to the death, but it just seemed like too much effort to find a venue, get the plane tickets, promote the event as a Pay Per View and have to explain to either of your families that you were killed in a no holds barred fight to the finish over a set of really cool pliers, so instead I flipped a coin.....
Show content
over and over again as a distraction until I was able to come up with a proper method of determining a winner!
I will ask one more question, and the first one of you to get it right will win- but, here's the catch, you can only answer one at a time! Each time you answer, you will have to wait for the other to post an answer before you can try again!
The question is:
What tool is on my 10th Anniversary Multitool.org Backpack?
Congratulations to the winner!
Def
Wow!
But I have an answer that that D Mac will love.
You win buddy! Like I said earlier, I was playing just to play. If it is ok with the Boss and the mods?
What a Gent! Chaos wins the day! Souls for the Reaper! Not a bad day for Dmac - signs his soul away but wins a Centredrive! Even Stevens.
Its a win/win! I hope you enjoy it Dmac as much as I have enjoyed the game and I better see some cool pics it! :salute:
:o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o
:ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh
Frig right off Nate!!! Really??
:hatsoff: :hatsoff: :hatsoff: :hatsoff: :hatsoff:
This anniversary has made me a bit more active here, and I'm really enjoying being back in the craziness!
I think a Center-Drive is worth a soul... >:D
:cheers: Nate, you're a prime example of why this place is so damn good!!!!! :cheers:
If Grant wants this to go to the bloody end though, I'm ready! :viking: :duel: :megaslap: :jedi: :vader:
:rofl: :rofl: :rofl:
Ahem, on a serious note, a huge thank you to Grant and the mods for making this GAW so much damn fun, and a huge thanks to Gerber for providing this wicked awesome MT!!! :tu: :tu: :tu:
-
Well, it appears that we have a two way tie, between Derek and Nate!
Congratulations guys, but as there is only one prize we can only have one winner.
(https://cdn.meme.am/cache/instances/folder727/500x/51755727/highlander-quick-there-can-be-only-one.jpg)
How do we break this tie?
My first thought was a fight to the death, but it just seemed like too much effort to find a venue, get the plane tickets, promote the event as a Pay Per View and have to explain to either of your families that you were killed in a no holds barred fight to the finish over a set of really cool pliers, so instead I flipped a coin.....
Show content
over and over again as a distraction until I was able to come up with a proper method of determining a winner!
I will ask one more question, and the first one of you to get it right will win- but, here's the catch, you can only answer one at a time! Each time you answer, you will have to wait for the other to post an answer before you can try again!
The question is:
What tool is on my 10th Anniversary Multitool.org Backpack?
Congratulations to the winner!
Def
Wow!
But I have an answer that that D Mac will love.
You win buddy! Like I said earlier, I was playing just to play. If it is ok with the Boss and the mods?
What a Gent! Chaos wins the day! Souls for the Reaper! Not a bad day for Dmac - signs his soul away but wins a Centredrive! Even Stevens.
Its a win/win! I hope you enjoy it Dmac as much as I have enjoyed the game and I better see some cool pics it! :salute:
:o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o :o
:ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh
Frig right off Nate!!! Really??
:hatsoff: :hatsoff: :hatsoff: :hatsoff: :hatsoff:
This anniversary has made me a bit more active here, and I'm really enjoying being back in the craziness!
I think a Center-Drive is worth a soul... >:D
:cheers: Nate, you're a prime example of why this place is so damn good!!!!! :cheers:
If Grant wants this to go to the bloody end though, I'm ready! :viking: :duel: :megaslap: :jedi: :vader:
:rofl: :rofl: :rofl:
Ahem, on a serious note, a huge thank you to Grant and the mods for making this GAW so much damn fun, and a huge thanks to Gerber for providing this wicked awesome MT!!! :tu: :tu: :tu:
:rofl:
You hit the nail on the head D Mac! And like D Mac said, I want to thank everyone for an awesome forum and thanks again to the boss, Mods , administration teem and Gerber.
:salute:
-
Congrats to derekmac and :hatsoff: to Nate.
-
Thanks to Grant and Gerber and congratulations Dmac. :cheers:
-
If Nate wants to let DMac win, who am I to argue? :D
BTW, the answer was a Gerber MP400- it would be awful rude to use a different brand in this Gerber sponsored contest, now wouldn't it? :pok:
Derek- send me a PM with your address and I will get your prize off to you ASAP!
Thanks to everyone who played and to Gerber for helping us celebrate the 11th Anniversary of Multitool.org!
Def
-
Congratulation dmac! :cheers:
-
Congrats to derekmac and :hatsoff: to Nate.
:salute:
-
Congratulations derekmac, well played game, and a tip of the hat and applause to ducttapetech for also catching up and his gracious step to the side. A classy move.
Sent from my iPhone using Tapatalk
-
Congratulations dmac! And thanks for a really funny gaw
It's not failure if you learn something from it
-
Congrats DMac :tu:
Just out of interest what we're your first guesses going to be?
-
Mine was gonna be a MP 600.
-
Very kind gesture DTT :salute: Stuff like that make MTO the place that it is :cheers: Big congrats to Dmac as well :tu: :like: :like:
Thanks once again to Grant for the GAW along with MTO and Gerber for the awesome prize :dd: :like: :like:
-
Awesome giveaway, congrats man!
-
Congratulations Nate & DMac! Great GAW boss, thanks for the chance to play!
-
Grats!! Was in for the creative answers. gave me a break from the monotony from the trike forums. :D
-
Grats!! Was in for the creative answers. gave me a break from the monotony from the trike forums. :D
(http://www.radioflyer.com/skin/frontend/blank/buildatrike/images/trike/BAT_landing.gif)
-
Those are some pretty sweet rides there DMac- are they all yours? :D
Def
-
Those are some pretty sweet rides there DMac- are they all yours? :D
Def
Only the pink ones since they go with my Jeep.
(https://cdn.meme.am/images/400x/16065783.jpg)
-
Cute. Guess these are the Leatherman of tools, and those of yours are more of the Gerber versions. :rofl:
(http://farm4.static.flickr.com/3092/3238692959_be87b77dab.jpg)
(http://images.gizmag.com/hero/silk-28.jpg)
(http://www.utahtrikes.com/uploads/utrecenttrikes/Brets_Annihilator_X90/pic1/IMGP3516.JPG)
(http://www.utahtrikes.com/uploads/utrecenttrikes/4292860_CatrikeExpeditionRecumbentTrike/pic1/1400616155286.jpg)
(http://www.utahtrikes.com/uploads/utmoreproductdetails/1032/picture/bike_15_full1.jpg)
(https://trikeasylum.files.wordpress.com/2010/09/innesenti2.jpg?w=640)
---
Did spot Derekmac on one though, so have to give him a widdle credit :drink:
(http://2.bp.blogspot.com/_wb8bAl1P-N0/SZ2VHEeCbOI/AAAAAAAAGI8/qXLQEUXSZe4/s400/RuntRecumbent.jpg)
-
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
:megaslap:
-
:rofl: :rofl: :rofl:
-
Congrats derekmac... and DTT for being graceous... :cheers:
Thanks to Def and the mods for this wonderful event... I had lotsa fun answering and reading through all the answers... Not to forget, thanks for sponsoring Gerber :salute:
Sent from my iPhone using Tapatalk
-
Congrats Del Boy :cheers:
Nicely played Nate :hatsoff:
and of course thanks again to Grant, MTO, and Gerber :salute:
-
Those are some pretty sweet rides there DMac- are they all yours? :D
Def
Only the pink ones since they go with my Jeep.
(https://cdn.meme.am/images/400x/16065783.jpg)
:rofl: :rofl: :rofl:
-
Great GAW!
Thanks to the boss and mods for the fun!
:cheers: :drink:
Thanks to Gerber for the prize!
:like: :drool:
Congrats to Derek!
:salute: :tu:
Props to Nate!
:hatsoff: :clap:
-
Grats!! Was in for the creative answers. gave me a break from the monotony from the trike forums. :D
(http://www.radioflyer.com/skin/frontend/blank/buildatrike/images/trike/BAT_landing.gif)
Laugh all you want, but I'm actually pushing right now a red one just like in the gif :whistle:
-
Cute. Guess these are the Leatherman of tools, and those of yours are more of the Gerber versions. :rofl:
Poke fun at Gerber all you want, but at least they are designing new stuff and not just breaking their tools in half and selling them as something new..... :pok:
Def
-
Exactly :tu:
-
Cute. Guess these are the Leatherman of tools, and those of yours are more of the Gerber versions. :rofl:
Poke fun at Gerber all you want, but at least they are designing new stuff and not just breaking their tools in half and selling them as something new..... :pok:
Def
Noticed that. Leatherman died out of new ideas instead of listing to their customers?
-
Leatherman is a victim of their own success, plain and simple.
They aren't hungry anymore, and it seems the main customers they are listening to are the mindless zombie fanboys on their FB page. There's no reason to improve any more because the feedback they are getting is that they are wonderful, they will always be wonderful and they can do no wrong.
I think that the R&D department at Leatherman needs to spend a few weeks studying Multitool.org and what folks here are saying they want- for example, more versions of knifeless tools for the ever increasing places where knives are unwelcome.
Sooner or later they will come to their senses and realize that they are missing something and they will work hard until they get it back. Until then we'll have to deal with things like barely functional tool bracelets. ::)
Def
-
I think LM should have a look at what happened to BlackBerry...
I love my LM tools, I really do! They really should listen, look and learn from what the members here are saying. I know in the grand scheme of things we are a small group to them, but we are a very knowledgeable group, and we know what works, and what doesn't.
I respect Gerber for not putting out things like the Tread. They seem to be sticking more to their roots, and improving on the great tools they already have. I don't have the CD in hand yet, but everything I've read or viewed makes me believe that it'll be everything I wanted the MP600 to be, and right now the MP600 is one of my favourite MT's.
-
Leatherman is a victim of their own success, plain and simple.
They aren't hungry anymore, and it seems the main customers they are listening to are the mindless zombie fanboys on their FB page. There's no reason to improve any more because the feedback they are getting is that they are wonderful, they will always be wonderful and they can do no wrong.
I think that the R&D department at Leatherman needs to spend a few weeks studying Multitool.org and what folks here are saying they want- for example, more versions of knifeless tools for the ever increasing places where knives are unwelcome.
Sooner or later they will come to their senses and realize that they are missing something and they will work hard until they get it back. Until then we'll have to deal with things like barely functional tool bracelets. ::)
Def
Well, they won't listen to us simply because every sentence here ends with ...and it should be cheaper.
That said, LM is evolving and with the Signal they made a bigger step than most realize. Personally, I'm looking forward to 3 gen Wave, based on the Signal.
-
I got to see a CD in a package today, and it made me even more excited that I won it! It looks like it's going to become my EDC MT.
I love my MP600, but the super short drivers, and the inside blades made me not carry it as much as I would have liked. The extra reach on the CD, and the great looking main blade made me drool in the store! lol
-
Let us know how you like and how it works out for you. Also, pics man!
-
Let us know how you like and how it works out for you. Also, pics man!
Will do! :tu:
-
What DTT said :like: :like: glad it got therer safe :tu:
:popcorn:
-
What DTT said :like: :like: glad it got therer safe :tu:
:popcorn:
It hasn't arrived yet. :-[ I saw one at Bass Pro, and it made me super excited to get this!
-
What DTT said :like: :like: glad it got therer safe :tu:
:popcorn:
It hasn't arrived yet. :-[ I saw one at Bass Pro, and it made me super excited to get this!
:doh:
-
I keep crossing my fingers when I go to the mailbox, but so far it hasn't worked. :(
-
:ahhh :ahhh :ahhh
-
:mail:
:think:
:cry:
Nothing yet. I was reeeeealy hoping it would be here for the weekend, but the mail delivery service must be out to get me. lol
-
It's a rough life dmac. ::) :P
-
It's a rough life dmac. ::) :P
:twak:
:rofl:
-
:nanadance:
-
:evilbanana:
-
Is it there yet? :pok:
-
How bout now ???
-
Probably there now right? :tu:
-
Has to be :cheers:
-
Bet dmac is getting his fondle on. :dwts:
-
:o :ahhh :ahhh :ahhh
-
:to:
-
You guys are mean, I'm telling my mom!! :cry: :cry: :cry: :cry: :cry:
Oh yeah.
:twak: :twak: :twak:
-
Yeah she can call you a waambulance...
-
:rofl:
-
Yeah she can call you a waambulance...
I'll show you!!
(http://media.foodnetwork.ca/files/2015/08/3How-to-Crack-Open-a-Lobster-042.jpg)
-
Yeah she can call you a waambulance...
I'll show you!!
(http://media.foodnetwork.ca/files/2015/08/3How-to-Crack-Open-a-Lobster-042.jpg)
Ou lala, what pretty hands you have... :dd:
-
Yeah she can call you a waambulance...
I'll show you!!
(http://media.foodnetwork.ca/files/2015/08/3How-to-Crack-Open-a-Lobster-042.jpg)
Ou lala, what pretty hands you have... :dd:
Oh you're going to make me blush.
Sent from my SM-G935W8 using Tapatalk
-
https://www.youtube.com/watch?v=uMyCa35_mOg
-
https://www.youtube.com/watch?v=2TJAbKerr5I
-
https://www.youtube.com/watch?v=Zmg6MKm0xiQ
-
(https://i.imgflip.com/170lqb.jpg)
-
Hmmm, wonder what this could be? ???
(https://farm5.staticflickr.com/4450/37919560066_d382d82525_b.jpg) (https://flic.kr/p/ZLPE7o)20171027_162534 (https://flic.kr/p/ZLPE7o) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
Let's find out, shall we!!
(https://farm5.staticflickr.com/4496/37919564416_2aecf2cd96_b.jpg) (https://flic.kr/p/ZLPFpo)20171027_162552 (https://flic.kr/p/ZLPFpo) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
Sweet, an MTO sticker!!
(https://farm5.staticflickr.com/4468/24121888358_abcaec1c01_b.jpg) (https://flic.kr/p/CKyZ1S)20171027_162646 (https://flic.kr/p/CKyZ1S) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
Wait, a 10th Anniversary one too!! :ahhh
(https://farm5.staticflickr.com/4478/26197486939_77997c8329_b.jpg) (https://flic.kr/p/FUYYai)20171027_162659 (https://flic.kr/p/FUYYai) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
Hmmm, what's that lump in the envelope... A new sheath!!! :dd:
(https://farm5.staticflickr.com/4479/37919567166_7b018597bc_b.jpg) (https://flic.kr/p/ZLPGdN)20171027_162709 (https://flic.kr/p/ZLPGdN) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
Oh look, there are bits in the sheath! SCORE!
(https://farm5.staticflickr.com/4490/37263294754_3db1e682dc_b.jpg) (https://flic.kr/p/YLQ8id)20171027_162736 (https://flic.kr/p/YLQ8id) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
I think there's one thing left. There is.... Come on, get out of there! A CENTER-DRIVE!!! :drool:
(https://farm5.staticflickr.com/4463/37919569276_fc1d0af2a2_b.jpg) (https://flic.kr/p/ZLPGRb)20171027_162818 (https://flic.kr/p/ZLPGRb) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
Scratch that, and MTO branded CD!! :dd:
(https://farm5.staticflickr.com/4507/37263297484_77aa854c4a_b.jpg) (https://flic.kr/p/YLQ97h)20171027_162840 (https://flic.kr/p/YLQ97h) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
Oh my, what a big blade you have!!
(https://farm5.staticflickr.com/4460/37942658542_0a0701ac1c_b.jpg) (https://flic.kr/p/ZNS3tY)20171027_162926 (https://flic.kr/p/ZNS3tY) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
Now just some random pics.
(https://farm5.staticflickr.com/4491/37263298564_1512e824f3_b.jpg) (https://flic.kr/p/YLQ9qU)20171027_163105 (https://flic.kr/p/YLQ9qU) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
(https://farm5.staticflickr.com/4480/37942660422_083eee2198_b.jpg) (https://flic.kr/p/ZNS43o)20171027_163322 (https://flic.kr/p/ZNS43o) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
I really like how it feels in the hand.
(https://farm5.staticflickr.com/4495/37942663002_a4f06300c7_b.jpg) (https://flic.kr/p/ZNS4NS)20171027_163531 (https://flic.kr/p/ZNS4NS) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
(https://farm5.staticflickr.com/4473/37263302004_996c212c84_b.jpg) (https://flic.kr/p/YLQasd)20171027_165305 (https://flic.kr/p/YLQasd) by Derek MacMillan (https://www.flickr.com/photos/141749886@N07/), on Flickr
OK, so initial impressions. The bit driver seems fantastic! The MT is very comfortable in my hand when using the bit driver. The inside tools are easy to get to, and the spring loaded pliers help with that. They also have a nice snap when closing them.
The main blade though... The thumb hole had very sharp edges, to the point I was worried about cutting my thumb. I used the diamond file on my TTi to smooth them out, but it still needs a bit of work. The lock is also very hard to engage. It won't engage just by opening it with my thumb, I have to really pull back on the blade. The lock doesn't slide very far either, only about half the thickness of the lock slides over the blade.
Overall I think the CD will be a big hit for me. I'll give it a good workout, and report my findings later on.
Thanks again to Grant, MTO and Gerber!! :hatsoff:
-
:drool:
-
Nice Dmac! Looks like a keeper for sure.
-
Sweet ! :cheers: :tu:
-
Looks very nice DMac :dd: :like: will be waiting on the report :popcorn:
-
Very nice mate! :drool: :drool: :like:
-
Nice!
-
:whistle:
https://forum.multitool.org/index.php/topic,74412.0.html
:pok:
:D
-
:whistle:
https://forum.multitool.org/index.php/topic,74412.0.html
:pok:
:D
:tu: