Text Only | Text with Attachments

Multitool.org Forum

Trade Forums => Tools Needed => Topic started by: Anthony on November 20, 2007, 01:04:50 AM

Title: Looking for two Kick pocket clips.
Post by: Anthony on November 20, 2007, 01:04:50 AM: It's my understanding that the pocket clips can be used to dissassemble Leatherman tools (specifically the current issue ones with that bolt head).

I'd like to buy/borrow a pair if anyone has them to make a megatool out of my Kick and Blast :multi:

I'd pay for shipping both ways within the US if someone would let me borrow them for a few days.
Title: Re: Looking for two Kick pocket clips.
Post by: Grant Lamontagne on November 20, 2007, 01:20:02 AM: Remember there are two different sized bolts- a 6mm and 7mm. I don't have a Kick/Blast/Fuse handy to check, but I know that to disassemble the ALX/AL Charges you need both sizes.

Of course if you are just mucking about with the implement ends, this may not apply to you even if the bolts are different sizes.

Def
Title: Re: Looking for two Kick pocket clips.
Post by: Anthony on November 20, 2007, 01:36:29 AM: Specifically it's my Kick and Blast which look like the same bolt heads on both impliment ends. If someone could test fit their Kick clip and see it it can turn a Blast bolt I'd appreciate it :D
Title: Re: Looking for two Kick pocket clips.
Post by: J-sews on November 20, 2007, 03:20:34 AM: Quote from: Corrugated on November 20, 2007, 01:36:29 AM
Specifically it's my Kick and Blast which look like the same bolt heads on both impliment ends. If someone could test fit their Kick clip and see it it can turn a Blast bolt I'd appreciate it :D

Yep, they both have the same bolt heads on the implement end. (The bolt heads on the plier end is slightly larger) The Kick pocket clip will work fine as a wrench on either tool.

By the way, MoonTrail has got the pocket clips for $5.00 each HERE (http://www.moontrail.com/ltg-kick-clip.php). It might be almost as cheap to buy a pair as to pay someone for shipping costs both ways?
Title: Re: Looking for two Kick pocket clips.
Post by: Anthony on November 20, 2007, 03:56:29 AM: Quote from: J-sews on November 20, 2007, 03:20:34 AM
Quote from: Corrugated on November 20, 2007, 01:36:29 AM
Specifically it's my Kick and Blast which look like the same bolt heads on both impliment ends. If someone could test fit their Kick clip and see it it can turn a Blast bolt I'd appreciate it :D

Yep, they both have the same bolt heads on the implement end. (The bolt heads on the plier end is slightly larger) The Kick pocket clip will work fine as a wrench on either tool.

By the way, MoonTrail has got the pocket clips for $5.00 each HERE (http://www.moontrail.com/ltg-kick-clip.php). It might be almost as cheap to buy a pair as to pay someone for shipping costs both ways?

What is the shipping like with Moontrail? I don't see a chart on their site...
Title: Re: Looking for two Kick pocket clips.
Post by: J-sews on November 20, 2007, 03:59:32 AM: Hmmm. A short time ago when I bought mine, shipping for accessories was free. Now I put two pocket clips into their checkout, and it says shipping via USPS is $5.83 :-\
Title: Re: Looking for two Kick pocket clips.
Post by: Tom Munch on November 20, 2007, 06:20:11 AM: They're $5 on the LM site too with $5 shipping.

Tom