Multitool.org Forum

Tool Talk => Leatherman Tools => Topic started by: Fistach on September 23, 2012, 10:33:42 AM

Title: OHT owners club!
Post by: Fistach on September 23, 2012, 10:33:42 AM
It's highest time to start this thread here on forums!

I've placed my order for OHT and I expect it to arrive (from USA to Poland) by the mid october! Has anyone laid his hands on this great tool already? Share the pictures as I will do as soon as I receive my new tool!
Title: Re: OHT owners club!
Post by: SAKnight on September 23, 2012, 12:19:08 PM
Well I messed that up! Neglected to see this was the leatherman sub, not Swiss. Alas, the problem with the "show unread posts" button  :whistle: :twak:
Title: Re: OHT owners club!
Post by: David on September 23, 2012, 06:15:40 PM
Dont have one yet. But have a coyote tan OHT pre-ordered.
Title: Re: OHT owners club!
Post by: danbomb on September 23, 2012, 07:35:52 PM
I have had an OHT for a couple days and it's now getting broken in. Flicking open the pliers is very easy and becomes second nature (it's all in the wrist). One reason I would grab my various dedicated needlenose pliers is because fine work is MUCH easier with spring loading. I have been using my right ring finger for a "human spring" on leatherman tools for decades. Having the handles close together when the pliers are nearly closed also makes this easier.
My damn camera battery pack is dead- I will post pics in a few hours.
Title: Re: OHT owners club!
Post by: danbomb on September 24, 2012, 12:41:21 AM
(http://i134.photobucket.com/albums/q109/danbomb1/9232012009_zps2b0cfdcf.jpg)
(http://i134.photobucket.com/albums/q109/danbomb1/9232012007_zpscdfa51f0.jpg)
Title: Re: OHT owners club!
Post by: stealth007s on September 24, 2012, 02:58:09 AM
One problem I foresee with this tool (I don't own one yet) is the handles coming together and pinching the palm like the Gerber MP. Is this the case dan bomb? What you tell me may convince me to buy or not to buy.  :think:

(http://www.sherv.net/cm/emo/smoke/cigar.gif)
Title: Re: OHT owners club!
Post by: danbomb on September 24, 2012, 03:21:02 AM
Well I had to try pretty hard but I did manage pinch my hand if I hold it a certain way. I doubt it's gonna be a problem- I usually grab things slowly anyhow.
The only negatives I have found so far:
1 The torx bolts are 2 different sizes and 2 need the bits with holes and the other 2 do not.
2 it is larger and heavier than a charge or wave with shorter blades (the plier head slider takes up a lot of space)
For me the positives far outweigh the negatives and I do not regret the purchase.
Title: Re: OHT owners club!
Post by: stealth007s on September 24, 2012, 04:12:38 AM
More than likely T8 and T10 security torx as is with most of their stuff
Title: Re: OHT owners club!
Post by: Fistach on September 24, 2012, 12:04:25 PM
can you post the picture of the sheath it came with?
Title: Re: OHT owners club!
Post by: danbomb on September 24, 2012, 12:24:01 PM
Mine came with a black molle that has no pockets.
(http://i134.photobucket.com/albums/q109/danbomb1/sheath001_zps5597a50e.jpg)
Title: Re: OHT owners club!
Post by: Fistach on September 24, 2012, 12:31:25 PM
Mine came with a black molle that has no pockets.

Where did you order? I ordered at cabelas.com and they say:

Quote
The Leatherman® OHT® One-Hand Tool – Black, item IK-530825, comes with a black nylon sheath.
Title: Re: OHT owners club!
Post by: danbomb on September 24, 2012, 06:16:04 PM
I bought mine at Cabela's and got it very quick. I ordered on Tuesday and it arrived on Friday.
Title: Re: OHT owners club!
Post by: Fistach on September 24, 2012, 07:15:51 PM
that's awesome news mate - it means that I will also have it with MOLLE sheath! Thanks !
Title: Re: OHT owners club!
Post by: Gareth on September 24, 2012, 07:25:37 PM
One problem I foresee with this tool (I don't own one yet) is the handles coming together and pinching the palm like the Gerber MP. Is this the case dan bomb? What you tell me may convince me to buy or not to buy.  :think:

(http://www.sherv.net/cm/emo/smoke/cigar.gif)

TBH modern Gerbers don't really do that easily either, though the original Multiplier was certainly guilty. :)
Title: Re: OHT owners club!
Post by: valvestem125 on September 25, 2012, 03:42:22 PM
Is the OHT in the Cabela's retail stores yet?
Title: Re: OHT owners club!
Post by: kirk13 on September 26, 2012, 12:00:42 AM
(http://i134.photobucket.com/albums/q109/danbomb1/9232012009_zps2b0cfdcf.jpg)
(http://i134.photobucket.com/albums/q109/danbomb1/9232012007_zpscdfa51f0.jpg)

Can I just say that that is the uglyist MT I think I've ever seen :-\

Title: Re: OHT owners club!
Post by: Raukodur on September 26, 2012, 02:06:12 AM
I think in its ugliness is a form of beauty, a beauty of functionality rather than aesthetics. Its a look which can work very well for something like a tool.

The only problem is, as has been pointed out by many before, for the size of this tool, its plier head and tools are too small.

If LM are making sliding plier heads now, would be really interested to see a juice sized tool, which just the most must have tools on it (e.g. scissors, screwdrivers/bit driver, awl, openers, etc).
Title: Re: OHT owners club!
Post by: kd8fre on September 26, 2012, 06:53:34 PM
I'm in!
(http://longshotcs.com/files/2012-09-26%2012.40.46-1.jpg)
(http://longshotcs.com/files/2012-09-26%2012.42.01.jpg)
Are everyone's pliers seperated like the last photo? Just the very tips of mine touch. (I know, I'm picky).

-Russ
Title: Re: OHT owners club!
Post by: kd8fre on September 26, 2012, 06:57:45 PM
More than likely T8 and T10 security torx as is with most of their stuff
I can confirm that the two larger, security torx screws are T10s.  The smaller screws at the plier head end are something smaller than a T7, which is the smallest I have on hand.

Russ
Title: Re: OHT owners club!
Post by: danbomb on September 26, 2012, 08:11:47 PM
My pliers touch at the very end as well.
Title: Re: OHT owners club!
Post by: zoidberg on September 26, 2012, 09:47:14 PM
Are everyone's pliers seperated like the last photo? Just the very tips of mine touch. (I know, I'm picky).

My pliers touch at the very end as well.

Most needle nosed pliers are like that. IMO it is a good design, when gripping something thin you get even pressure along the jaws.
Title: Re: OHT owners club!
Post by: kd8fre on September 26, 2012, 09:50:02 PM
I'm good with it, just was making sure I didn't get a bad one.  :multi:
Title: Re: OHT owners club!
Post by: coastalchris on September 28, 2012, 02:44:19 AM
I am on the road this weekend and we pass a cabelas on our trip.  I will stop by and if they have it, I am buying on a impulse purchase. 
Title: Re: OHT owners club!
Post by: David on September 28, 2012, 04:08:37 AM
I called Cabelas in Wichita yesterday and the OHT was not in stock. They also informed me no Cabelas store in the US has them yet.
Title: Re: OHT owners club!
Post by: Desmodromic on September 28, 2012, 11:14:01 AM
This one will be on my wanted list for sure! Love the looks of it.
Title: Re: OHT owners club!
Post by: coastalchris on October 01, 2012, 05:54:55 PM
I am on the road this weekend and we pass a cabelas on our trip.  I will stop by and if they have it, I am buying on a impulse purchase.

Stopped in the Charleston, WV during my trip.  It is probably the smallest Cabelas in the country and is not like the Full sized ones I am used to.  The knife selection was not very good and they did not have a OHT in stock.  They were not sure when they would get the OHT in, if we want it now we will have to order it online.

Personally I want to feel it in my hands before I order.
Title: Re: OHT owners club!
Post by: David on October 01, 2012, 06:11:29 PM
Quote from: David link=topic=40047.msg 641292#msg 641292 date=1348416940
Don't have one yet. But have a coyote tan OHT pre-ordered.

My pre-order was moved back to Jan 2013. LM contacted KC last Thursday and said they were having problems. So I cancelled my pre-order and will get one else where.   :)
Title: Re: OHT owners club!
Post by: Desmodromic on October 01, 2012, 08:04:19 PM
Quote from: David link=topic=40047.msg 641292#msg 641292 date=1348416940
Don't have one yet. But have a coyote tan OHT pre-ordered.

My pre-order was moved back to Jan 2013. LM contacted KC last Thursday and said they were having problems. So I cancelled my pre-order and will get one else where.   :)

Problems in; problems with the tool or problems; problems with production?
Title: Re: OHT owners club!
Post by: David on October 01, 2012, 09:28:56 PM
Quote from: David link=topic=40047.msg 641292#msg 641292 date=1348416940
Don't have one yet. But have a coyote tan OHT pre-ordered.

My pre-order was moved back to Jan 2013. LM contacted KC last Thursday and said they were having problems. So I cancelled my pre-order and will get one else where.   :)

Problems in; problems with the tool or problems; problems with production?

Production problems if I remember correctly.     :)
Title: Re: OHT owners club!
Post by: Fistach on October 02, 2012, 10:04:45 AM
Leatherman informed me that they will make a limited amount of OHTs this year and will start a full production next year - my guess is that they need to reset machines that now make other multitools - maybe they will retire some other model(s)?

We will see. I'm glad that my OHT has arrived to my uncle and is now being shipped to Poland! I extept it on next monday!

It' still not available here in Poland.
Title: Re: OHT owners club!
Post by: Desmodromic on October 02, 2012, 10:24:58 AM
Leatherman informed me that they will make a limited amount of OHTs this year and will start a full production next year - my guess is that they need to reset machines that now make other multitools - maybe they will retire some other model(s)?

We will see. I'm glad that my OHT has arrived to my uncle and is now being shipped to Poland! I extept it on next monday!

It' still not available here in Poland.

And a review on tuesday?  :sak:
Title: Re: OHT owners club!
Post by: Fistach on October 03, 2012, 10:01:19 PM
Leatherman informed me that they will make a limited amount of OHTs this year and will start a full production next year - my guess is that they need to reset machines that now make other multitools - maybe they will retire some other model(s)?

We will see. I'm glad that my OHT has arrived to my uncle and is now being shipped to Poland! I extept it on next monday!

It' still not available here in Poland.

And a review on tuesday?  :sak:

Nope. I need to test it firstly at home to learn the tools on the multitool by heart and then test it during firefighting drills and in action to make a thorough and reliable review you can enjoy and find useful. I need to test it whether it can be put into good use with bare hands (well this is rather obvious) but also in nitryl rubber gloves or a firefighting gloves.

I hate all this unboxing crap on Youtube which some people reckon as a review...

You need to wait a while!

BTW. Here is my tool tale :)

http://www.leatherman.com/Products/story?id=3124&c=70 (http://www.leatherman.com/Products/story?id=3124&c=70)
Title: Re: OHT owners club!
Post by: Kukamunga on October 04, 2012, 01:12:15 AM
I haven't posted much here...well practically nothing actually!  However, I've enjoyed a lot of the knowledgeable MT INFOmation...

I too ordered mine on line with Cabela's and opted to pick it up at their store.  Mainly because they wanted $20 for shipping, which seemed a little steep.  After the trek there, I think it's possible I made the wrong choice.

At any rate, I have to say that I was really excited to see this Leatherman finally released.  Not nearly as pragmatic as some of you, I erred completely on the geeked out side [drove my girlfriend nutz].  I'm a fan of style and substance - in almost everything - from bands, sports, tools.  The OHT seems to possess this, to my mind.  I actually like the way it presents, the design and look of it.  A little different than its predecessors.  Not completely original - but you get the feeling Leatherman owns the design.

I've had my  OHT for about a week now and I like it quite a bit.  Pliers work as described here.  I've not pinched myself yet, nor had a problem.  Weight is good, feels good in the hand.  Great ease of use.  Personally, there's no problem for me with the smaller sized knives, saw.  Whilst I may not have 20 different Leatherman [plural?] bought over a span of 30+ years, I do have a black Surge and a MUT EOD.  If I need a larger knife, there's both of those.

Seems a great addition to me.  However, I have to say that the sheath just *blowz*.  I was quite suprised in the negative.  It's just flimsy and plain jane to the max.  I ordered a Molle XL from eBay - AFTER I'd ordered a 'Large' Molle from Amazon.  Amazon sent the same sheath that comes with the OHT!  So, btw - the #931005 sheath [off Leatherman's website] IS the OHT sheath.  Made in China...

Also, in a relatively inconsequential note - they left off the white "Leatherman OHT" lettering, which I thought looked really cool.
Title: Re: OHT owners club!
Post by: BR101 on October 05, 2012, 04:40:21 AM
I got a OHT on the way. Should be here next week sometime. I'll be reviewing it.
If anyone is looking to get one of these, you may wanna hold out for my review if you wanna save some cha-ching   ;)
Title: Re: OHT owners club!
Post by: Gareth on October 05, 2012, 09:03:29 AM
Thanks for the thoughts Kukamunga. :cheers:
Title: OHT owners club!
Post by: Clark on October 06, 2012, 05:30:36 AM
I got the black OHT a couple days ago, it came with the large black molle, same one that came with the Mut. Cool.  So far I like the OHT but I've only fondled it and have not any real work.   I am interested to hear what the pro reviewers say about.  Obviously it's way different than any other Leatherman.   I to was disappointed the lettering was black unlike the white lettering in preview pictures.   I'm a fan of the OHT.   Tan and black one is on back order.
Title: Re: OHT owners club!
Post by: valvestem125 on October 18, 2012, 12:42:19 AM
No "OHT" at Cabela's yet in Scarborough Maine.  :(
Title: Re: OHT owners club!
Post by: polak187 on October 20, 2012, 02:11:57 AM
Got one and posted a review in the "review" section. Nothing to rave about.
Title: Re: OHT owners club!
Post by: David on November 02, 2012, 04:05:16 PM
Finally got a tan one ordered from Cabelas. Should be here Monday. It should be real handy at work.    :)
Title: Re: OHT owners club!
Post by: danbomb on November 03, 2012, 11:29:39 PM
After a month of daily use I have found I like these pliers better than any of my other leatherman tools by far. When I pick up my wave or charge now they feel odd because I am expecting spring loading and handles that close completely together. If you carry a multi and use the pliers more than anything else the OHT is the way to go. If you use the other tools more you can save some weight and bulk and have longer blades with a wave or most of the other leatherman tools. 9.6 ounces is very noticeable in a sheath and bounces around loose in a pocket.
My black unit does not have the leatherman logo in white so I hit the side with the main blade with 220 so I can find it instantly. I was having a hard time seeing the graphics without grabbing a flashlight.
(http://i134.photobucket.com/albums/q109/danbomb1/ohtwear001.jpg)
Title: Re: OHT owners club!
Post by: David on November 06, 2012, 06:57:20 AM
Got a coyote brown one from Cabelas today. It's a hand full. I like it.    :D
Title: Re: OHT owners club!
Post by: Tube on December 07, 2012, 06:37:25 PM
I've been a loyal Leatherman user for more than 20 years now. I've taken the factory tour, and ceaselessly promote Leatherman tools to my friends.

I bought an OHT the day before yesterday, and was quite pleased with the spring-loaded pliers. I like the thinness of the pliers as well.

I was rather shocked to discover that my particular tool had been assembled incorrectly, and this was not caught in the inspection stage:

Leatherman OHT (http://www.youtube.com/watch?v=Ok1GPEAy9tw#ws)
Title: Re: OHT owners club!
Post by: kmanct3 on December 07, 2012, 07:16:03 PM
I will be in the club in a few days, Black for me
Title: Re: OHT owners club!
Post by: sjian on December 09, 2012, 02:16:20 AM
I was rather shocked to discover that my particular tool had been assembled incorrectly, and this was not caught in the inspection stage:

Are you going to send it back for a replacement?
Title: Re: OHT owners club!
Post by: Sazabi on December 09, 2012, 04:28:01 AM
I've been a loyal Leatherman user for more than 20 years now. I've taken the factory tour, and ceaselessly promote Leatherman tools to my friends.

I bought an OHT the day before yesterday, and was quite pleased with the spring-loaded pliers. I like the thinness of the pliers as well.

I was rather shocked to discover that my particular tool had been assembled incorrectly, and this was not caught in the inspection stage:

Leatherman OHT (http://www.youtube.com/watch?v=Ok1GPEAy9tw#ws)

It makes an interesting collector's piece with the flub; I'd see if anyone wants it here before you send it back, honestly.  :)
Title: Re: OHT owners club!
Post by: GutterClown on December 13, 2012, 12:18:08 PM
Hey guys,

I sent one of the OHT's to a guy in Michigan, and he asked what the Notch(es) are in the handles.

I can't see a use for it in normal usage.  Most likely manufacturing or assembly related.

Any other ideas?
Title: Re: OHT owners club!
Post by: valvestem125 on December 13, 2012, 01:27:00 PM
Relief radii is my guess.
Title: Re: OHT owners club!
Post by: kmanct3 on December 13, 2012, 07:09:27 PM
As far as i can see,everyone is sold out, 2-3 weeks before available, I saw one on ebay buy it now $170.00 ! people are bidiing and the prices are going way up. Think I will wait
Title: Re: OHT owners club!
Post by: stealth007s on December 27, 2012, 06:57:22 PM
Saw these in BO at the downtown Austin REI. $82?¿?
Title: Re: OHT owners club!
Post by: kmanct3 on December 27, 2012, 07:03:24 PM
OK couldnt wait..(http://i1205.photobucket.com/albums/bb437/kmanct3/B12A0CBB-C24B-4937-BA0C-C5AF77EE0451-1129-0000003E67B36DDB.jpg)
Title: Re: OHT owners club!
Post by: Outback in Idaho on December 29, 2012, 10:58:04 AM
Hey guys,

I sent one of the OHT's to a guy in Michigan, and he asked what the Notch(es) are in the handles.

I can't see a use for it in normal usage.  Most likely manufacturing or assembly related.

Any other ideas?

Wire stripper?
Title: Re: OHT owners club!
Post by: henryhcyap on January 02, 2013, 03:20:11 PM
Hello everybody,  :salute: Happy New Year to all, just got my OHT today. It will replace my Tti as EDC for now. Was wondering, anybody knows if the removable bit driver can be used on the OHT ?
Thanks !





Title: Re: OHT owners club!
Post by: Outback in Idaho on January 02, 2013, 08:28:26 PM
Hello everybody,  :salute: Happy New Year to all, just got my OHT today. It will replace my Tti as EDC for now. Was wondering, anybody knows if the removable bit driver can be used on the OHT ?
Thanks !

The Removable Bit Driver will fit any of the Leatherman tools with either the square Phillips driver or the large bit driver (via the 1/4 x 6mm bit).
Leatherman does not mention the item can be used with the large bit driver. This is probably due to twisting-motion stress. The bit could break with over exertion.

Quote from: Leatherman
Removable Bit Driver (http://www.leatherman.com/accessories/product/Removable_Bit_Driver)

Add ten additional tools to your standard multi-tool.

Fits: Core®, Rebar™, Rebar™ Black, Super Tool® 300, Blast®, Fuse®, Kick®, Juice® Xe6, Juice® Cs4, Juice® S2, Juice® C2, Genus®, Hybrid®, Vista®

From looks at the zoom-in (http://www.leatherman.com/product/OHT) photo, no. Using the RBD on any of the on-board drivers would put too much of twisting-motion stress if it could fit onto one of the bits and cause breakage.
Title: Re: OHT owners club!
Post by: stealth007s on January 03, 2013, 12:26:12 AM
Hello everybody,  :salute: Happy New Year to all, just got my OHT today. It will replace my Tti as EDC for now. Was wondering, anybody knows if the removable bit driver can be used on the OHT ?
Thanks !

I'd ask Metroplicity (Eric). He's the 'go to' guy here for LM modding :tu:

More than likely some milling/ grinding would have to be done to make this happen. Very doubtful that it would 'drop in' :think:
Title: Re: OHT owners club!
Post by: stealth007s on January 03, 2013, 12:31:22 AM


The Removable Bit Driver will fit any of the Leatherman tools with either the square Phillips driver or the large bit driver (via the 1/4 x 6mm bit).
Leatherman does not mention the item can be used with the large bit driver. This is probably due to twisting-motion stress. The bit could break with over exertion.

Quote from: Leatherman
Removable Bit Driver (http://www.leatherman.com/accessories/product/Removable_Bit_Driver)

Add ten additional tools to your standard multi-tool.

Fits: Core®, Rebar™, Rebar™ Black, Super Tool® 300, Blast®, Fuse®, Kick®, Juice® Xe6, Juice® Cs4, Juice® S2, Juice® C2, Genus®, Hybrid®, Vista®


Until someone mentioned this on another thread today, I wasn't aware of what this was for :think: Pretty  8) contraption!¡!
Title: Re: OHT owners club!
Post by: Outback in Idaho on January 03, 2013, 03:22:33 AM
Until someone mentioned this on another thread today, I wasn't aware of what this was for :think: Pretty  8) contraption!¡!

It is quite interesting that Leatherman chose to omit a large bit driver and/or the adaptability to the removable bit driver. It does have those two redundant flatheads, no file, and an odd looking can opener
Title: Re: OHT owners club!
Post by: henryhcyap on January 03, 2013, 11:25:29 AM
Thanks for the input everybody :salute:, @Xelkos : yes, the large bit driver is something that I missed on the OHT today when I needed to unscrew a hex socket. Anyways, I went ahead and bought a kit from eBay since its not that expensive an item. Will see how it goes.
Title: Re: OHT owners club!
Post by: Outback in Idaho on January 04, 2013, 12:59:10 AM
You could always make your own handle and carry it with the RBD for a portable bit driver. Might even start a new fad here. :pok: maybe even a RBD Owner's thread.
Title: Re: OHT owners club!
Post by: henryhcyap on January 20, 2013, 04:32:50 PM
Hello everybody,  :salute: Happy New Year to all, just got my OHT today. It will replace my Tti as EDC for now. Was wondering, anybody knows if the removable bit driver can be used on the OHT ?
Thanks !

The only option available should it be absolutely necessary to use the removable bit driver on the OHT.
Title: Re: OHT owners club!
Post by: recklesstryg on April 11, 2013, 04:14:49 PM
(https://webapi.bumpserver.com/v1/data/6a06c69c-6cad-46eb-a03a-4c276d563408)
Kydex holster
(https://webapi.bumpserver.com/v1/data/7781a34f-9e7b-458f-95b9-ab6c5279fdd9)
Used a Constant Force Spring to hold the head back in the closed position.
(https://webapi.bumpserver.com/v1/data/0b906751-fc26-4021-b187-472dc913a601)
Used the threaded hole on the opposite side of the lock as the mounting point.
McMaster Part: 9293K42   
http://www.mcmaster.com/#catalog/119/1213/=m9wgsv


Title: Re: OHT owners club!
Post by: Goatlord666 on May 04, 2013, 03:27:52 AM
A welcome addition to the family!

worked well for peeling potatoes and cutting up veggies
(http://img843.imageshack.us/img843/81/sam3197e.jpg)


size is just right...up to par with my favorite heavy duty MTs
(http://img703.imageshack.us/img703/4026/sam3200y.jpg)


just like your favorite dog. always by your side, ever so loyal, but can accidentally bite if you're too rough at play
(http://img17.imageshack.us/img17/1304/sam3227t.jpg)

Title: Re: OHT owners club!
Post by: campussecurity on January 15, 2014, 02:28:38 AM
Yay I can rejoin this club since my original tan OHT went MIA.  :multi:
Title: Re: OHT owners club!
Post by: captain spaulding on January 15, 2014, 03:02:42 AM
Still have yet to even handle a OHT.  :twak: i really want to try one out but its not to high on my list of things to buy.
Title: Re: OHT owners club!
Post by: troutful on February 06, 2014, 03:01:30 AM
Hello OHT owners.  I have recently picked one up.. I have a question/concern.

The pliers do not line up that great... about 1 mm -1.5 mm off, sort of twisted.

...is this a norm for this multitool? or is it possible mine has a defect?

Thanks for your help!
Title: Re: OHT owners club!
Post by: campussecurity on February 06, 2014, 07:05:59 AM
Hello OHT owners.  I have recently picked one up.. I have a question/concern.

The pliers do not line up that great... about 1 mm -1.5 mm off, sort of twisted.

...is this a norm for this multitool? or is it possible mine has a defect?

Thanks for your help!

Mine does it as well. I gave up worrying about it as i'm OCD about enough things already.....
Title: Re: OHT owners club!
Post by: Toolslinger on March 24, 2014, 02:00:52 AM
I'm in! Got a Coyote Tan one couple weeks back. Not my fave tool load out, but the fiddle factor is through the roof.
Title: Re: OHT owners club!
Post by: Mr Biriyani on April 10, 2014, 05:53:15 PM
Got my OHT yesterday. It´s been on my wishlist since it came out. I like the odd look of it. On the positive side is the excellent strapcutter.The one on my charge can not cut paracord without excessive force and blue fingers.
The molle pouch was a little disapointment as the nylon is from poor quality. Have an older one that is really good quality.
But it´s not a big thing for me. I had a TacticalTailor knifepouch laying around that fits the OHT like a glove.
Title: Re: OHT owners club!
Post by: leathermon on May 12, 2014, 11:20:50 AM
I love my OHT, waited almost a year to buy, its solid as a rock.  Ive read allot of complaints about the screwdrivers being to short, but that doesnt seem to be the case with most applications.
Title: Re: OHT owners club!
Post by: Mr Biriyani on May 13, 2014, 03:19:31 PM
I love my OHT, waited almost a year to buy, its solid as a rock.  Ive read allot of complaints about the screwdrivers being to short, but that doesnt seem to be the case with most applications.
Very nice I like it to, which color did you get ?
Title: Re: OHT owners club!
Post by: leathermon on May 15, 2014, 07:41:10 AM
I love my OHT, waited almost a year to buy, its solid as a rock.  Ive read allot of complaints about the screwdrivers being to short, but that doesnt seem to be the case with most applications.
Very nice I like it to, which color did you get ?

Coyote Tan  >:D
Title: Re: OHT owners club!
Post by: os1019 on May 17, 2014, 01:25:16 AM
Glad I found this feed I am on the prowl for a new multi-tool and the OHT may be the one.

Sent from my RM-940_nam_att_200 using Tapatalk
Title: Re: OHT owners club!
Post by: SxS on May 17, 2014, 03:50:17 AM
I have the Leatherman 'bit set' (skinny type phillips driver, etc.) that I believe went with my Skeletool...and like everybody else, a set of 1/4" hex type standard drivers.

Question:

Are the female screw threads on my OHT provided to accept any 'adaptor' (made by Leatherman or anybody else) allowing the use of any of these tools?

With the 2nd question obviously being…why not?

Thanks for any help.
Title: Re: OHT owners club!
Post by: SxS on May 17, 2014, 03:54:18 AM
….also…and be gentle…I really didn't read up on this thing when I got it…and now see something about a 'removable driver'…(post 58)
Title: Re: OHT owners club!
Post by: SxS on May 17, 2014, 04:10:26 AM
Until someone mentioned this on another thread today, I wasn't aware of what this was for :think: Pretty  8) contraption!¡!

It is quite interesting that Leatherman chose to omit a large bit driver and/or the adaptability to the removable bit driver. It does have those two redundant flatheads, no file, and an odd looking can opener

…should have seen this earlier (I agree, a complete miss-the-boat design flaw and no file to boot)…I guess that I still have the question…what are the threads for and who makes something which screws into them that is useful?
Title: Re: OHT owners club!
Post by: bmot on May 17, 2014, 05:10:59 PM
I think the threads would be for gun-cleaning things (the word OTIS is somewhere connected to it in my memory?)


Just like the MUT?
Title: Re: OHT owners club!
Post by: kkokkolis on May 17, 2014, 06:24:52 PM
I want to try the out of the front plier head some day but I'm not interested in Gerbers. Should I try an OHT instead?
Title: Re: OHT owners club!
Post by: Tengster on June 19, 2014, 05:09:48 PM
I am trying to get one but price ain't on my side lately
Title: Re: OHT owners club!
Post by: mrmustard on August 03, 2014, 09:50:19 PM
I am now a part of the club!! Just got my OHT.  :D and in Silver.

This is my first BO or should I say partially BO tool and the coating seems to rubbing off on my fingers, will wiping it down with mineral oil help or any other suggestions?



Title: Re: OHT owners club!
Post by: kirk13 on August 03, 2014, 09:56:07 PM
(http://i782.photobucket.com/albums/yy104/kirk130013/imagejpg1_zpsd2a1aaad.jpg) (http://s782.photobucket.com/user/kirk130013/media/imagejpg1_zpsd2a1aaad.jpg.html)
D'Oh! Forgot there was an OC for the OHT!
Title: Re: OHT owners club!
Post by: Rossko07 on August 29, 2014, 02:15:03 PM
Bought a tan OHT today. Really liking the way it operates. During out of work hours I don't need a big MT and feel as though the OHT covers all my basic needs.
Title: Re: OHT owners club!
Post by: Kampfer on September 14, 2014, 09:13:10 AM
 :-[ I just realized my OHT is my only LM MT has bypassing wire cutter but CANT cut paper!
Title: Re: OHT owners club!
Post by: David on September 14, 2014, 11:42:48 PM
 :)
Title: Re: OHT owners club!
Post by: AlephZero on December 12, 2014, 04:45:32 PM
Finally joining the OHT club :D


(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/20141212_161713.jpg)

(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/20141212_161749.jpg)

(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/20141212_161634.jpg)

 :ahhh

I absolutely love it!! :)

Title: Re: OHT owners club!
Post by: captain spaulding on December 15, 2014, 10:11:22 AM
I still need to try out one of these.  :multi:
Title: Re: OHT owners club!
Post by: zoidberg on December 15, 2014, 10:20:58 AM
I still need to try out one of these.  :multi:

You and me both buddy.  :tu: 
Title: Re: OHT owners club!
Post by: babola on December 15, 2014, 12:56:07 PM
I still need to try out one of these.  :multi:

Can I help you with that ...?   :pok:

(https://farm8.staticflickr.com/7481/15383512853_83dc76ae0f_b_d.jpg)
Title: Re: OHT owners club!
Post by: styx on December 15, 2014, 05:07:04 PM
that's a nice pic
Title: Re: OHT owners club!
Post by: Syncop8r on December 16, 2014, 08:17:39 AM
Love your one babola - finally a black oxide tool I like the look of.   :drool:

Things that put me off though:
 - Tiny blades (smaller than Skeletool's)
 - No file
 - It stays 'fat' when using drivers doesn't it?

Otherwise very tempting...
Title: Re: OHT owners club!
Post by: zoidberg on December 16, 2014, 08:55:24 AM
Love your one babola - finally a black oxide tool I like the look of.   :drool:

Things that put me off though:
 - Tiny blades (smaller than Skeletool's)
 - No file
 - It stays 'fat' when using drivers doesn't it?

Otherwise very tempting...

Skele doesn't have a file.  :P
Title: Re: OHT owners club!
Post by: babola on December 16, 2014, 09:02:54 AM
Love your one babola - finally a black oxide tool I like the look of.   :drool:

Things that put me off though:
 - Tiny blades (smaller than Skeletool's)
 - No file
 - It stays 'fat' when using drivers doesn't it?

Otherwise very tempting...

Thought those would put me off to, until I actually got one in the end - none of those are issues for me anymore  :)
This is a fantastic tool.
Oh, and did I mention I'm a sucker for blacked-out military/tactical/futuristic looking stuff?  :D
Title: Re: OHT owners club!
Post by: Syncop8r on December 16, 2014, 09:05:55 AM
Love your one babola - finally a black oxide tool I like the look of.   :drool:

Things that put me off though:
 - Tiny blades (smaller than Skeletool's)
 - No file
 - It stays 'fat' when using drivers doesn't it?

Otherwise very tempting...

Skele doesn't have a file.  :P
I'm comparing more with the Surge.
Title: Re: OHT owners club!
Post by: zoidberg on December 16, 2014, 09:12:13 AM
Love your one babola - finally a black oxide tool I like the look of.   :drool:

Things that put me off though:
 - Tiny blades (smaller than Skeletool's)
 - No file
 - It stays 'fat' when using drivers doesn't it?

Otherwise very tempting...

Skele doesn't have a file.  :P
I'm comparing more with the Surge.

I do most of my cutting with a Spyderco Dragonfly that has a sub two inch blade.
Title: Re: OHT owners club!
Post by: Lichtbote on December 16, 2014, 11:02:11 AM
- Tiny blades (smaller than Skeletool's)
 - No file

That´s nothing that can´t be handled.

The wanted tools for a swap just need to be found. (I still need to find a BO Waves saw)


- It stays 'fat' when using drivers doesn't it?

As my other regular MT is a BO Surge ....... nothing to complain for me.  :think: ;)
Title: Re: OHT owners club!
Post by: Lichtbote on December 16, 2014, 11:06:55 AM
And it matches so much nicer to some of my other toys than my full black Surge.  :rofl: :tu:
Title: Re: OHT owners club!
Post by: Syncop8r on December 21, 2014, 03:36:25 AM
I was in Bivouac today (an outdoor store here) and found myself face to face with a BO OHT. There it was, right in the middle of the display cabinet, calling to me. The price tag said $109NZD. (for comparison a Surge next to it was $268NZD!)
"Would you like me to take anything out for you to look at?" asks the lovely young lady - Hell yes!
So I have a little play with it (which was nice) but couldn't get the pliers to retract - I take it you just squeeze the handles together and push the buttons in?
Anyway, I'm on the verge of buying it when she comes back and tells me the price is wrong; on the box it says $199NZD. No Deal.  >:(
Title: Re: OHT owners club!
Post by: Top-Gear-24 on December 22, 2014, 07:57:53 PM
I was in Bivouac today (an outdoor store here) and found myself face to face with a BO OHT. There it was, right in the middle of the display cabinet, calling to me. The price tag said $109NZD. (for comparison a Surge next to it was $268NZD!)
"Would you like me to take anything out for you to look at?" asks the lovely young lady - Hell yes!
So I have a little play with it (which was nice) but couldn't get the pliers to retract - I take it you just squeeze the handles together and push the buttons in?
Anyway, I'm on the verge of buying it when she comes back and tells me the price is wrong; on the box it says $199NZD. No Deal.  >:(
When you find something a lot cheaper than normal, don't play with it first, buy it and get out  :twak:.

Just kidding mate ;).

When I find something that's mispriced, it all depends on what kind of store I'm in ...

Is it one of those stores where you can have a nice chat with the guy at the counter about that latest Leatherman tool or that sweet looking Swisstool, and where they are always willing to help you out with warranty stuff and things like that.  Or is it one of those stores where they don't know smurf about what they're selling and just want to get their hands on your hard earned cash with the least possible effort ...

When I'm in one of the first type of shops, I'll ask if the price is correct, because it seems to be too low.  When I'm in the other type of shop, I will not ask any questions, just say that I would like to buy that tool, pay and get out as fast as I can hopefully before they have a chance to notice their mistake ... (not that this kind of thing happens to me a lot).

Does this make me a bad person ...  :think:

Anyway, I payed 120 Euros for my OHT (about $190NZD if the currency converter is correct) and I think it's worth it, for me the OHT is the biggest surprise I've had for the last couple of years when it comes down to multitools.

Here's a pic of mine:

(http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20OHT/152_zps18a7d4f3.jpg) (http://s739.photobucket.com/user/Rikske77/media/Leatherman%20OHT/152_zps18a7d4f3.jpg.html)
Title: Re: OHT owners club!
Post by: Syncop8r on December 22, 2014, 10:53:25 PM
The problem is it had the low price in the display stand but the high price on the box, when they scan it I guess it would ring up the high price.
I could argue that it was advertised at the low price, therefore they should sell it to me for that. As I left I saw her correcting the price on the display stand.

Since then I have actually noticed them on an online auction site here for $109NZD plus $15 P&P from Australia. The impulse buy urge may have passed though. ;-)
Title: Re: OHT owners club!
Post by: babola on December 22, 2014, 11:30:02 PM
The problem is it had the low price in the display stand but the high price on the box, when they scan it I guess it would ring up the high price.
I could argue that it was advertised at the low price, therefore they should sell it to me for that. As I left I saw her correcting the price on the display stand.

Since then I have actually noticed them on an online auction site here for $109NZD plus $15 P&P from Australia. The impulse buy urge may have passed though. ;-)

Would be worth a try but unfortunately NZ Consumer Guarantee Act states a merchant isn't required to sell the product at the mislabeled or incorrect price listed and they're allowed to correct their mistake on the fly.
Good thing is many store clerks don't know this and you can try bending their arm.
Title: Re: OHT owners club!
Post by: David on December 29, 2014, 10:38:19 PM
 :)
Title: Re: OHT owners club!
Post by: Syncop8r on December 29, 2014, 10:44:12 PM
- Tiny blades (smaller than Skeletool's)
 - No file

That´s nothing that can´t be handled.

The wanted tools for a swap just need to be found. (I still need to find a BO Waves saw)
So bigger blades fit in without affecting anything else?

- It stays 'fat' when using drivers doesn't it?

As my other regular MT is a BO Surge ....... nothing to complain for me.  :think: ;)
What I mean is some MTs such as Surge can be opened out more when using the drivers, which might be advantageous in a tight space.
Title: Re: OHT owners club!
Post by: bmh46 on December 30, 2014, 08:31:08 AM
Nice pic bud.  How did you get that picture?
Title: Re: OHT owners club!
Post by: Griffster on January 15, 2015, 01:19:42 AM
I'm in.

Mine arrived from Phtonlight a couple of days ago.  I'm really enjoying the quick deployment of the pliers, and the small blade is easy to work with too.  I'm not so sure about the screwdrivers though.  i love the bit holder on my TTi, so we'll see.
This is the second Leatherman arrival in a week, and my fourth full sized LMT in the collection.
I think it's time to admit that I've joined the ranks of the afflicted!  :facepalm:

Title: Re: OHT owners club!
Post by: SteveC on January 15, 2015, 01:22:39 AM
I'm in.

Mine arrived from Phtonlight a couple of days ago.  I'm really enjoying the quick deployment of the pliers, and the small blade is easy to work with too.  I'm not so sure about the screwdrivers though.  i love the bit holder on my TTi, so we'll see.
This is the second Leatherman arrival in a week, and my fourth full sized LMT in the collection.
I think it's time to admit that I've joined the ranks of the afflicted!  :facepalm:

Welcome to the afflicted  :multi:
Title: Re: OHT owners club!
Post by: parnass on January 15, 2015, 02:38:02 AM
I've been looking at OHTs for a long time, waiting for a new OHT at a good price.  Finally snagged this one today and snapped a photo of it.  Then, I gave it a good 3-in-One oil treatment and wiped off the excess.

It fits in a Red Rhino Mega Pouch for horizontal carry, but is too wide for my other sheaths.  Can't wait to give it a workout.

(http://parnass.com/images/leatherman-oht1.jpg)
Title: Re: OHT owners club!
Post by: ducttapetech on January 15, 2015, 02:51:19 AM
Welcome to the club!

Nate

Title: Re: OHT owners club!
Post by: pietervn on January 26, 2015, 07:48:38 AM
G'Day,

I'm in too, got mine last week. Cool tool so far. I'll EDC it for the next week or so.

Cheers,

Pete
Title: Re: OHT owners club!
Post by: zoidberg on February 03, 2015, 09:44:04 AM
I am in the club!  :woohoo:

(https://farm8.staticflickr.com/7287/16247114649_9f16146030.jpg) (https://flic.kr/p/qKGH9n)
Title: Re: OHT owners club!
Post by: ducttapetech on February 03, 2015, 02:07:06 PM
Nice Zman! How do you like it?

Nate

Title: Re: OHT owners club!
Post by: NKlamerus on February 03, 2015, 09:18:45 PM
Ahhhhh I want so bad.
Title: Re: OHT owners club!
Post by: zoidberg on February 03, 2015, 10:40:17 PM
Nice Zman! How do you like it?

Nate

It's early days yet and like most MTs there is some good and bad things about it.
I'll get some real work out of it and write up anything worth noting.
The sprung pliers are pretty good, I like those.
Title: Re: OHT owners club!
Post by: Desmodromic on February 04, 2015, 06:20:29 AM
Have one for some time now. EDC it for a while but in the end switched back to my MUT because of the bigger blade.
Title: Re: OHT owners club!
Post by: pietervn on February 04, 2015, 09:35:00 AM

The sprung pliers are pretty good, I like those.


I like them too, plus the fact that the handles are nearly closed with full pressure. I am really liking it so far.

Cheers,

Pete
Title: Re: OHT owners club!
Post by: naftausa on February 04, 2015, 03:21:36 PM
I' m in...

BO Black OHT in my hand... :ahhh :ahhh :drool:
Title: Re: OHT owners club!
Post by: mapletaffy on February 15, 2016, 04:37:14 PM
I've had my OHT for over a year and I think it has the best pliers on any leather man. Thier length and strength are incomparable on any multi tool. I've snapped screws and nails by placing them in the cutters putti the tool on the ground and stomping the handles. This was only done in a dirty pinch.
(http://i.imgur.com/oFqfTqu.jpg)
Title: Re: OHT owners club!
Post by: Top-Gear-24 on February 15, 2016, 05:04:45 PM
I've had my OHT for over a year and I think it has the best pliers on any leather man. Thier length and strength are incomparable on any multi tool. I've snapped screws and nails by placing them in the cutters putti the tool on the ground and stomping the handles. This was only done in a dirty pinch.
(http://i.imgur.com/oFqfTqu.jpg)

I do not want to alarm you mate, but there appears to be some kind of creature under your table ... :dwts:

 :ahhh


Just kidding, I also like my OHT very much, first time I saw a pic of the OHT I remember saying how I would never buy one, and now it's one of my favorites, go figure.  I've said it before and I'll say it again, for me, the OHT is the biggest surprise of the last couple of years, when it comes to "new type of multitool".

Title: Re: OHT owners club!
Post by: stunkel on February 16, 2016, 08:33:43 PM
I also have a OHT for several months.
He is always in my pack for Geocaching.
Title: Re: OHT owners club!
Post by: Top-Gear-24 on February 16, 2016, 09:57:57 PM
I also have a OHT for several months.
He is always in my pack for Geocaching.

I like the patch on your pack  :rofl:.

I just found my first cache last week  :woohoo:.

I've had my Garmin Map60CSX since 2007 but mostly used it for mountainbiking and hiking, only recently I discovered Geocaching.com, and decided to give it a go last week, since my boys (9 and 11) had a week vacation.  We went for a multicache, solved some questions to find the location of the stash ... it was good fun :tu:.

It's great to see another Belgian here, there are some others, but we're still a rare breed  ;).
Title: Re: OHT owners club!
Post by: Monrogue on May 10, 2016, 02:41:42 PM
Another club I can join :)
(http://uploads.tapatalk-cdn.com/20160510/68acfca418162e5be0c5e4c39585f229.jpg)
(http://uploads.tapatalk-cdn.com/20160510/e4b1e97b06b751ddc4ac88a4f0ab9a00.jpg)
(http://uploads.tapatalk-cdn.com/20160510/cd62572ba5fd4584387217f6f7452479.jpg)

Sent from my SM-G920R4 using Tapatalk

Title: Re: OHT owners club!
Post by: Top-Gear-24 on May 10, 2016, 11:27:40 PM
Another club I can join :)
(http://uploads.tapatalk-cdn.com/20160510/68acfca418162e5be0c5e4c39585f229.jpg)
(http://uploads.tapatalk-cdn.com/20160510/e4b1e97b06b751ddc4ac88a4f0ab9a00.jpg)
(http://uploads.tapatalk-cdn.com/20160510/cd62572ba5fd4584387217f6f7452479.jpg)

Sent from my SM-G920R4 using Tapatalk

Welcome to the club my friend  :cheers:.

When the first rumours and later the first pics of the OHT showed up here, I was very sceptical about it (even said that this was one tool I would never buy ::)).  Then it started to show up at the local outdoor shops, and one time, my oldest son handed me one of the blister packed OHT's and told me he liked the look of it ...  ::).  And since I had some store credit left over I decided to take a gamble and bought it.

And I must say, the OHT turned out to be the biggest (positive) surprise I've had for the last couple of years when it comes to multitools.  Perfect fit and finish (maybe I was just lucky to get a "good one" this time, but I haven't heard much about any problems with an OHT here either, so ...).  And it hasn't failed on me yet  :D.

The silver one does look very classy, I must say  :drool:.
Title: Re: OHT owners club!
Post by: Top-Gear-24 on May 10, 2016, 11:37:40 PM
Just lurked through this topic and read the post from "Tube" on page two, where he showed his OHT which had the same tools on both sides of the tool, so I guess "fit and finish" on the OHT is still debatable, but there are other Leatherman tools that seem to have a lot more problems like that, so in my opinion, the OHT is still doing alright.
Title: Re: OHT owners club!
Post by: Monrogue on May 11, 2016, 03:36:31 AM
Another club I can join :)
(http://uploads.tapatalk-cdn.com/20160510/68acfca418162e5be0c5e4c39585f229.jpg)
(http://uploads.tapatalk-cdn.com/20160510/e4b1e97b06b751ddc4ac88a4f0ab9a00.jpg)
(http://uploads.tapatalk-cdn.com/20160510/cd62572ba5fd4584387217f6f7452479.jpg)

Sent from my SM-G920R4 using Tapatalk

Welcome to the club my friend  :cheers:.

When the first rumours and later the first pics of the OHT showed up here, I was very sceptical about it (even said that this was one tool I would never buy ::)).  Then it started to show up at the local outdoor shops, and one time, my oldest son handed me one of the blister packed OHT's and told me he liked the look of it ...  ::).  And since I had some store credit left over I decided to take a gamble and bought it.

And I must say, the OHT turned out to be the biggest (positive) surprise I've had for the last couple of years when it comes to multitools.  Perfect fit and finish (maybe I was just lucky to get a "good one" this time, but I haven't heard much about any problems with an OHT here either, so ...).  And it hasn't failed on me yet  :D.

The silver one does look very classy, I must say  :drool:.
Thanks for the welcome buddy.  The silver is nice indeed :tu: 

Sent from my SM-G920R4 using Tapatalk

Title: Re: OHT owners club!
Post by: Simplon on November 11, 2016, 01:52:21 PM
I visited my favourite Leatherman dealer today and came away with a OHT. Another Leatherman for the collection.
Title: Re: OHT owners club!
Post by: Poncho65 on November 11, 2016, 03:46:06 PM
 Congrats on the purchase :cheers: I have been back and forth about this one as well and think it will only be a matter of time before I pull the trigger and get one :facepalm: :D
Title: Re: OHT owners club!
Post by: Simplon on November 11, 2016, 03:50:56 PM
It's certainly an interesting multitool. I like the layout of all the tools. In fact it is excellent. :like:
Title: Re: OHT owners club!
Post by: Poncho65 on May 09, 2017, 05:58:18 PM
Congrats on the purchase :cheers: I have been back and forth about this one as well and think it will only be a matter of time before I pull the trigger and get one :facepalm: :D

Just 6 months and I pulled the trigger :D and am a new member of the OHT club  :tu: I have the black and silver model :tu:

(https://c1.staticflickr.com/5/4184/34514197726_a078f4475d_b.jpg) (https://flic.kr/p/UzUhwA)20170509_095602 (https://flic.kr/p/UzUhwA) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Title: Re: OHT owners club!
Post by: Monrogue on May 10, 2017, 03:59:39 AM
Welcome Poncho :cheers:  I have the silver as well.

Sent from my SM-G950U using Tapatalk

Title: Re: OHT owners club!
Post by: David on May 10, 2017, 07:19:56 AM
Congrats on the purchase :cheers: I have been back and forth about this one as well and think it will only be a matter of time before I pull the trigger and get one :facepalm: :D

Just 6 months and I pulled the trigger :D and am a new member of the OHT club  :tu: I have the black and silver model :tu:

(https://c1.staticflickr.com/5/4184/34514197726_a078f4475d_b.jpg) (https://flic.kr/p/UzUhwA)20170509_095602 (https://flic.kr/p/UzUhwA) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr

Welcome aboard!       :like:
Title: Re: OHT owners club!
Post by: zoidberg on May 10, 2017, 08:22:03 AM
Nice one Poncho.   :tu:   :tu:
Title: Re: OHT owners club!
Post by: zoidberg on May 10, 2017, 08:22:58 AM
I should probably post a few updated pics yeah.
Title: Re: OHT owners club!
Post by: Poncho65 on May 10, 2017, 12:04:22 PM
Thanks guys :tu: It is different than a regular LM for sure and after I oiled it I can get it to flick open similar to my MP600 but still not as good flicking it yet ::) :D
Title: Re: OHT owners club!
Post by: zoidberg on May 10, 2017, 12:39:55 PM
(https://c1.staticflickr.com/4/3684/32822297623_b106b67dd0_b.jpg) (https://flic.kr/p/S1oRza)
Title: Re: OHT owners club!
Post by: zoidberg on May 10, 2017, 12:40:14 PM
(https://c1.staticflickr.com/4/3956/32900097523_892668b19b_b.jpg) (https://flic.kr/p/S8gALK)
Title: Re: OHT owners club!
Post by: zoidberg on May 10, 2017, 12:40:35 PM
(https://c1.staticflickr.com/3/2827/33672811106_74b5bc5d82_b.jpg) (https://flic.kr/p/TixXAJ)
Title: Re: OHT owners club!
Post by: zoidberg on May 10, 2017, 12:40:56 PM
(https://c1.staticflickr.com/3/2837/33557293172_ba3b71275e_b.jpg) (https://flic.kr/p/T8kU9d)
Title: Re: OHT owners club!
Post by: zoidberg on May 10, 2017, 12:41:16 PM
(https://c1.staticflickr.com/3/2913/33576350842_eb8b967cb7_b.jpg) (https://flic.kr/p/Ta2zjJ)
Title: Re: OHT owners club!
Post by: Poncho65 on May 10, 2017, 01:26:30 PM
Some great pics Zoid :like: :like: BTW where did you get an extra set of scales from :think: :tu:
Title: Re: OHT owners club!
Post by: zoidberg on May 10, 2017, 01:29:12 PM
Some great pics Zoid :like: :like: BTW where did you get an extra set of scales from :think: :tu:

Thanks Poncho.   :cheers:   They were donated by a kind mtoer.
Title: Re: OHT owners club!
Post by: Poncho65 on May 10, 2017, 05:04:17 PM
Some great pics Zoid :like: :like: BTW where did you get an extra set of scales from :think: :tu:

Thanks Poncho.   :cheers:   They were donated by a kind mtoer.

Cool 8) Neat to be able to change it up sometimes :like: :like:
Title: Re: OHT owners club!
Post by: Poncho65 on May 10, 2017, 05:04:53 PM
Decided to carry the OHT again today :tu: :cheers:

(https://c1.staticflickr.com/5/4170/34411981252_eba99edb3b_b.jpg) (https://flic.kr/p/UqSp8A)20170510_081759 (https://flic.kr/p/UqSp8A) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Title: Re: OHT owners club!
Post by: Kev D on May 11, 2017, 10:41:40 AM
Picked one up last night so time to join the club

(https://c1.staticflickr.com/5/4156/33745233464_78a4dc1ba6_o.jpg) (https://flic.kr/p/TpX9f5)

(https://c1.staticflickr.com/5/4193/34426467792_7666f00d0c_o.jpg) (https://flic.kr/p/Us9Dtw)
Title: Re: OHT owners club!
Post by: zoidberg on May 11, 2017, 10:44:15 AM
Welcome to the club Kevin.   :cheers:
Title: Re: OHT owners club!
Post by: Kev D on May 11, 2017, 11:13:00 AM
Thank you  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on May 11, 2017, 07:13:58 PM
Nice Kevin 8) and welcome :tu: :like:
Title: Re: OHT owners club!
Post by: Kev D on May 11, 2017, 07:58:09 PM
Nice Kevin 8) and welcome :tu: :like:

Thank you  :cheers:
Title: Re: OHT owners club!
Post by: Monrogue on May 12, 2017, 03:32:47 AM
Welcome Kevin :cheers:

Sent from my SM-G950U using Tapatalk

Title: Re: OHT owners club!
Post by: Mapeteusz on May 13, 2017, 01:06:14 AM
Hi

My first leatherman

(https://uploads.tapatalk-cdn.com/20170512/c7ecce7b2c1db28f6a9d8a27e35c6121.jpg)

Greetings from Perú
Title: Re: OHT owners club!
Post by: ducttapetech on May 13, 2017, 01:08:24 AM
And it is a good one man! Welcome to the forums! I hope you enjoy your stay.
Title: Re: OHT owners club!
Post by: Monrogue on May 13, 2017, 04:33:33 AM
And it is a good one man! Welcome to the forums! I hope you enjoy your stay.
Ditto :tu:

Sent from my SM-G950U using Tapatalk

Title: Re: OHT owners club!
Post by: Poncho65 on May 13, 2017, 05:21:50 AM
And it is a good one man! Welcome to the forums! I hope you enjoy your stay.
Ditto :tu:

Sent from my SM-G950U using Tapatalk

+2 :cheers: :cheers: :like:
Title: Re: OHT owners club!
Post by: Kev D on May 13, 2017, 05:42:21 PM
And it is a good one man! Welcome to the forums! I hope you enjoy your stay.
Ditto :tu:

Sent from my SM-G950U using Tapatalk
A
+2 :cheers: :cheers: :like:

+3

Welcome aboard  :tu:
Title: Re: OHT owners club!
Post by: zrxoa1 on May 14, 2017, 04:14:46 AM
Here's my OHT, with my Bear n Sons knife that was my 10 year Anniversary gift at work.

(https://uploads.tapatalk-cdn.com/20170514/5bd0e1f4a93d1cc6ab824416bc3e6c11.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Poncho65 on May 14, 2017, 04:53:03 AM
Here's my OHT, with my Bear n Sons knife that was my 10 year Anniversary gift at work.

(https://uploads.tapatalk-cdn.com/20170514/5bd0e1f4a93d1cc6ab824416bc3e6c11.jpg)


Sent from my iPhone using Tapatalk

Great pic zrxoa1 :like: :like:
Title: Re: OHT owners club!
Post by: Poncho65 on June 14, 2017, 04:02:45 AM
(https://c1.staticflickr.com/5/4229/34450797424_c0572bd47f_b.jpg) (https://flic.kr/p/UuikPW)20170613_171719 (https://flic.kr/p/UuikPW) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Title: Re: OHT owners club!
Post by: Syncop8r on June 16, 2017, 08:07:52 AM
Oops.... I just bought something I shouldn't have...
Title: Re: OHT owners club!
Post by: Kev D on June 16, 2017, 08:50:48 AM
Oops.... I just bought something I shouldn't have...

 :like:

 :worthless:
Title: Re: OHT owners club!
Post by: Syncop8r on June 16, 2017, 09:04:46 AM
It's on it's way (hopefully)...
Title: Re: OHT owners club!
Post by: Kev D on June 16, 2017, 09:06:45 AM
It's on it's way (hopefully)...

 :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on June 16, 2017, 12:58:05 PM
Oops.... I just bought something I shouldn't have...

 :like:

 :worthless:

 :rofl:

Congrats buddy :like: :like:
Title: Re: OHT owners club!
Post by: Syncop8r on July 03, 2017, 11:37:14 AM
Let me innnnnn!
Title: Re: OHT owners club!
Post by: Poncho65 on July 04, 2017, 03:56:12 AM
Couple nice pics Syncop :tu: :like:
Title: Re: OHT owners club!
Post by: Syncop8r on July 04, 2017, 04:43:04 AM
 :hatsoff:
Title: Re: OHT owners club!
Post by: Kev D on July 25, 2017, 12:18:38 PM
Sat trying to get my OHT to be a fliky and I've only just noticed that the patterns on the scales are the tools in that location  :facepalm:
Title: Re: OHT owners club!
Post by: Poncho65 on July 25, 2017, 04:39:29 PM
Sat trying to get my OHT to be a fliky and I've only just noticed that the patterns on the scales are the tools in that location  :facepalm:

 :whistle: OK I can't hold a straight face any longer :rofl:

I didn't know about the markings until the challenge thread though ;) at least that's when I think I learned about them :think: :shrug:
Title: Re: OHT owners club!
Post by: Kev D on July 25, 2017, 08:02:05 PM
Sat trying to get my OHT to be a fliky and I've only just noticed that the patterns on the scales are the tools in that location  :facepalm:

 :whistle: OK I can't hold a straight face any longer :rofl:

I didn't know about the markings until the challenge thread though ;) at least that's when I think I learned about them :think: :shrug:

Glad it's not just me then
Title: OHT owners club!
Post by: LoopCutter on August 26, 2017, 10:10:16 PM
New OHT caught my eye at Wally World and begged me to bring home.  I could not turn my back! (Thought to good a deal, too). 
(https://uploads.tapatalk-cdn.com/20170826/2d3f95786b7deda11e80b26f9cde3980.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Top-Gear-24 on August 27, 2017, 02:37:19 AM
New OHT caught my eye at Wally World and begged me to bring home.  I could not turn my back! (Thought to good a deal, too). 
(https://uploads.tapatalk-cdn.com/20170826/2d3f95786b7deda11e80b26f9cde3980.jpg)


Sent from my iPhone using Tapatalk
What ... $40 for an OHT  :sa:.
Over here they cost around 150 Euro  :facepalm:.

Congrats on finding such a sweet deal mate  :salute:.
Title: Re: OHT owners club!
Post by: Syncop8r on August 27, 2017, 05:22:17 AM
Good score  :tu:

I find the pliers are great for finicky stuff.
(silly pic is upside down  :twak:)
Title: Re: OHT owners club!
Post by: rdub934 on August 27, 2017, 06:14:02 AM
Wow, $40 is a smoking good deal!
Title: Re: OHT owners club!
Post by: captain spaulding on August 27, 2017, 07:26:29 AM
Awesome deal for $40. I was never to thrilled with the thought of owning a OHT but for $40 I would give it a shot.
Title: Re: OHT owners club!
Post by: Mechanickal on August 27, 2017, 09:05:38 AM
New OHT caught my eye at Wally World and begged me to bring home.  I could not turn my back! (Thought to good a deal, too). 
(https://uploads.tapatalk-cdn.com/20170826/2d3f95786b7deda11e80b26f9cde3980.jpg)


Sent from my iPhone using Tapatalk
What ... $40 for an OHT  :sa:.
Over here they cost around 150 Euro  :facepalm:.

Congrats on finding such a sweet deal mate  :salute:.
Life ain't fair for us across that great puddle. :(
Title: Re: OHT owners club!
Post by: LoopCutter on August 27, 2017, 03:24:25 PM
Thank you all.  OHT was not in my sights either.  Always look at knifes at Walmart and it was by itself with the 40 tag.  From my lessons at MTO, "do not walk away from a bargain",

It is a BIG tool, and its tools have a smooth movement requiring no break-in effort.

 


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Poncho65 on August 27, 2017, 03:50:16 PM
$40 is a great deal LC :o :o :like: :like: I am at odds with the OHT :think: I want to like it but it is a bit bulky for some of the tools being smaller than they should be :shrug:  Still it is a nice addition to the collection :like: :like:
Title: Re: OHT owners club!
Post by: LoopCutter on August 27, 2017, 04:53:06 PM
$40 is a great deal LC :o :o :like: :like: I am at odds with the OHT :think: I want to like it but it is a bit bulky for some of the tools being smaller than they should be :shrug:  Still it is a nice addition to the collection :like: :like:
Agree, with every point.


Sent from my iPhone using Tapatalk
Title: OHT owners club!
Post by: LoopCutter on August 29, 2017, 04:18:44 AM
Had chance to wipe done and work with my new OHT tonight. 
1. It is a very large MT.
2. The blades are easily accessible.
3. The blades are small in proportion to the overall size.
4. This a heavy tool, not for pocket carry. Best in Molle sheath attached to bag or body type rig for access, or a bag's inside pocket.
(https://uploads.tapatalk-cdn.com/20170829/ec20d0254dee859977edee9b4c1f2aee.jpg)(https://uploads.tapatalk-cdn.com/20170829/a1dec9d591dbf828547089a145019d6b.jpg)
My present plan is to substitute it with my Gerber Diesel as the Phillips and small flat blade appear usable for my my work tasks on tap for this week. 


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: MusicMen on August 29, 2017, 04:32:36 AM
My present plan is to substitute it with my Gerber Diesel as the Phillips and small flat blade appear usable for my my work tasks on tap for this week. 

Sent from my iPhone using Tapatalk
Do,you have the tool kit (http://www.ebay.com/itm/Gerber-Tool-Kit-for-Freehand-Nautilus-Diesel-Recoil-Suspension-10-Pieces/201987919783?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649) for your Diesel?
Title: Re: OHT owners club!
Post by: LoopCutter on August 29, 2017, 04:44:51 AM
No, was not aware of the bit kit for the Diesel. Do have both LM bit kits, for my Wave and Rebar.
Thank you for link! ;)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Syncop8r on August 29, 2017, 06:50:06 AM
I am yet to use the saw, but I suspect that is the only tool that I will find too short.
So far everything else I have used, including the knives, have been fine despite their length for what I have used them for.
Title: Re: OHT owners club!
Post by: Poncho65 on August 29, 2017, 12:05:15 PM
Let us know how it goes with the OHT, LC :cheers: GIve us your initial impressions after you have used it at work and see if they have changed any from your first thoughts of it :tu:
Title: Re: OHT owners club!
Post by: Syncop8r on August 30, 2017, 04:54:02 AM
A question for those who have pulled an OHT apart: which Leatherman multitools are the bigger tools (knife/saw/strapcutter) compatible with?
Title: Re: OHT owners club!
Post by: leathermon on August 30, 2017, 06:21:07 AM
I am yet to use the saw, but I suspect that is the only tool that I will find too short.
So far everything else I have used, including the knives, have been fine despite their length for what I have used them for.
I have used the saw quite a bit,  and did not find it too small.  It made quick work of small-medium branches and was comfortable in the hand.

Sent from my SAMSUNG-SM-G891A using Tapatalk

Title: Re: OHT owners club!
Post by: AlephZero on August 30, 2017, 07:36:57 PM
Rejoining the club...

(https://farm5.staticflickr.com/4254/35720489026_b70eeb2a37_b.jpg)

(https://farm5.staticflickr.com/4068/35720489116_b759a652a4_b.jpg)


Yeah, you know the drill, Smurf the Smurfbucket!

:cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on August 31, 2017, 01:03:20 AM
Rejoining the club...

(https://farm5.staticflickr.com/4254/35720489026_b70eeb2a37_b.jpg)

(https://farm5.staticflickr.com/4068/35720489116_b759a652a4_b.jpg)


Yeah, you know the drill, Smurf the Smurfbucket!

:cheers:

Nice Aleph 8) :like: :like:
Title: Re: OHT owners club!
Post by: LoopCutter on August 31, 2017, 03:46:41 AM
Let us know how it goes with the OHT, LC :cheers: GIve us your initial impressions after you have used it at work and see if they have changed any from your first thoughts of it :tu:
Well 2 days at several different locations, performing routine and service maintenance.

I was surprised how similar the OHT tools are to my Diesel. Not having to deploy the pliers to access tools on the OHT does make life easier. 

Only tool missing is the file. And of course the scissors, neither are an issue for me as I have access to other tools.

Presently, the OHT will take space in my tool grip and moved to pocket for trips away from the truck. 

Also, the OHT can be sheath carried as it does fit my ST300 nylon sheath. 

I took some comparison pictures of my group presently traveling with me this week before I begin cutting back this weekend.
Knife blades
(https://uploads.tapatalk-cdn.com/20170831/e8c054a6eca1ba51aa94efc2a7392ba0.jpg)
Phillips(https://uploads.tapatalk-cdn.com/20170831/54c4dc5c89030673a6b85ba52637678c.jpg)
Small flat blade
(https://uploads.tapatalk-cdn.com/20170831/575898254274dab17718844cc75e9537.jpg)
Saw blade
(https://uploads.tapatalk-cdn.com/20170831/39ac0c98bcdafed35d2cf30512cea581.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Poncho65 on August 31, 2017, 04:11:05 AM
Great comparison pics LC :cheers: :like: :like:
Title: Re: OHT owners club!
Post by: zoidberg on August 31, 2017, 05:13:22 AM
A question for those who have pulled an OHT apart: which Leatherman multitools are the bigger tools (knife/saw/strapcutter) compatible with?

Just guessin here, probably just the Sidekick and Wingman?

Re the saw length, https://forum.multitool.org/index.php/topic,70721.msg1436837.html#msg1436837
Title: Re: OHT owners club!
Post by: LoopCutter on August 31, 2017, 03:47:02 PM
Good laugh Zoidberg, 2" is 2".   LOL


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Syncop8r on October 13, 2017, 12:46:55 PM
I only realised today that I could flick the pliers open.
I always thought you had to push both the buttons in to slide the pilers.  :facepalm:
Title: Re: OHT owners club!
Post by: LoopCutter on October 13, 2017, 07:49:47 PM
Cool, you can now survive with this tool and 1 hand tied behind back.

Right or Left?

Had you ever handled a MP 600 or Mp 400?

Very similar, but may be better for many of us. 


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Syncop8r on October 13, 2017, 10:32:55 PM
No, I'm yet to handle a Gerber. I may have seen one a couple of years ago but I can't remember...  :think:
Right handed.
Title: Re: OHT owners club!
Post by: Syncop8r on October 14, 2017, 12:08:10 AM
What is worse is that I had seen video reviews where they flick them open before I bought mine.  :facepalm:
Title: Re: OHT owners club!
Post by: Spartan19 on October 14, 2017, 02:00:42 AM
I just bought a black OHT earlier this week, I can't wait to put it to the test :)
Title: Re: OHT owners club!
Post by: LoopCutter on October 14, 2017, 02:13:52 AM
@Spartan - nice picture, mine a BO as well, which I like better than the 2-tone.

I sprayed mine down with penetrating oil and then wiped down to clean Black oxide dust from the tools and handles. 

What is the orange handle attached to in back ground?  Looks like a candidate to be shared my all things orange thread!


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: LoopCutter on October 14, 2017, 02:18:01 AM
No, I'm yet to handle a Gerber. I may have seen one a couple of years ago but I can't remember...  :think:
Right handed.
You will be good to go as a righty. 
I did not know how Gerber pliers deployed till this summer. After I picked a Diesel for a reasonable price. 

So good to learn something new. 

Have you noticed another feature on your OHT? Hint handles


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Syncop8r on October 14, 2017, 02:49:29 AM
Have you noticed another feature on your OHT? Hint handles
The pictures?
Title: Re: OHT owners club!
Post by: Poncho65 on October 14, 2017, 02:02:39 PM
I have had a much harder time flicking my OHT vs my MP600 :think: maybe need to oil it some more :shrug:

Great pic Spartan :tu:
Title: Re: OHT owners club!
Post by: gerleatherberman on October 14, 2017, 02:38:11 PM
I have had a much harder time flicking my OHT vs my MP600 :think: maybe need to oil it some more :shrug:

Great pic Spartan :tu:
The first OHT I got was so smooth, the pliers flew out like a hawk descending onto a none the wiser chipmunk.
The last one I got has to be flicked like throwing Thor's hammer onto the Earth. I am sure the ladder will eventually loosen up eventually. Maybe some quick-drying "new" 3 in 1  silicone lube would help. I used it on the Thor OHT and it helped a bit.  :cheers::)
Title: Re: OHT owners club!
Post by: Spartan19 on October 14, 2017, 10:00:26 PM
@Spartan - nice picture, mine a BO as well, which I like better than the 2-tone.

I sprayed mine down with penetrating oil and then wiped down to clean Black oxide dust from the tools and handles. 

What is the orange handle attached to in back ground?  Looks like a candidate to be shared my all things orange thread!


Sent from my iPhone using Tapatalk

Thanks Loopcutter! The orange handle is none other than my Opinel NO. 12, and unseen in the Vic pouch, is my Hunter XT. If it's orange, I'm all over it! :cheers:  :D
Title: Re: OHT owners club!
Post by: Spartan19 on October 14, 2017, 10:01:46 PM
I have had a much harder time flicking my OHT vs my MP600 :think: maybe need to oil it some more :shrug:

Great pic Spartan :tu:

Thanks Poncho! :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on October 15, 2017, 02:21:31 AM
I have had a much harder time flicking my OHT vs my MP600 :think: maybe need to oil it some more :shrug:

Great pic Spartan :tu:
The first OHT I got was so smooth, the pliers flew out like a hawk descending onto a none the wiser chipmunk.
The last one I got has to be flicked like throwing Thor's hammer onto the Earth. I am sure the ladder will eventually loosen up eventually. Maybe some quick-drying "new" 3 in 1  silicone lube would help. I used it on the Thor OHT and it helped a bit.  :cheers::)

I have actually tried a couple different lubricants but I shall continue until it flicks better :cheers:
Title: Re: OHT owners club!
Post by: gerleatherberman on October 15, 2017, 05:47:42 AM
I have had a much harder time flicking my OHT vs my MP600 :think: maybe need to oil it some more :shrug:

Great pic Spartan :tu:
The first OHT I got was so smooth, the pliers flew out like a hawk descending onto a none the wiser chipmunk.
The last one I got has to be flicked like throwing Thor's hammer onto the Earth. I am sure the ladder will eventually loosen up eventually. Maybe some quick-drying "new" 3 in 1  silicone lube would help. I used it on the Thor OHT and it helped a bit.  :cheers::)

I have actually tried a couple different lubricants but I shall continue until it flicks better :cheers:
Just sit and flick until it is smooth. Good way to keep busy when watching TV. Plus side, it aggregates other people into leaving the room, so you can change the channel to what you want. :rofl:
Title: Re: OHT owners club!
Post by: Poncho65 on October 15, 2017, 04:20:40 PM
I have had a much harder time flicking my OHT vs my MP600 :think: maybe need to oil it some more :shrug:

Great pic Spartan :tu:
The first OHT I got was so smooth, the pliers flew out like a hawk descending onto a none the wiser chipmunk.
The last one I got has to be flicked like throwing Thor's hammer onto the Earth. I am sure the ladder will eventually loosen up eventually. Maybe some quick-drying "new" 3 in 1  silicone lube would help. I used it on the Thor OHT and it helped a bit.  :cheers::)

I have actually tried a couple different lubricants but I shall continue until it flicks better :cheers:
Just sit and flick until it is smooth. Good way to keep busy when watching TV. Plus side, it aggregates other people into leaving the room, so you can change the channel to what you want. :rofl:

Great tip >:D

 :rofl:
Title: Re: OHT owners club!
Post by: gerleatherberman on October 15, 2017, 04:54:46 PM
It's a win win, until you've been figured out by someone. Then you get an ear full. :ahhh
Title: Re: OHT owners club!
Post by: Spartan19 on October 15, 2017, 11:35:38 PM
You just have to keep them guessing! :D :multi:
Title: Re: OHT owners club!
Post by: Poncho65 on October 16, 2017, 02:06:10 AM
 :salute: :D
Title: Re: OHT owners club!
Post by: Syncop8r on October 16, 2017, 06:26:10 AM
I have had a much harder time flicking my OHT vs my MP600 :think: maybe need to oil it some more :shrug:
I haven't a Gerber to compare with but it works best moving your arm from the elbow rather than the wrist (longer lever) and of course only gripping the sides.
Oh and ideally not facing a window.  :ahhh
Title: Re: OHT owners club!
Post by: Poncho65 on October 16, 2017, 11:52:59 AM
I have tried that method as well and still can only get it part of the way out :ahhh I need to carry it this week to work and keep trying to flick it and maybe that will loosen it up a bit :think: :tu:
Title: Re: OHT owners club!
Post by: Spartan19 on October 16, 2017, 11:23:40 PM
I usually just hold in the buttons on the sides to deploy the pliers, unless I'm in a hurry. Usually you can get that to work with both Gerber and Leatherman mts.
Title: Re: OHT owners club!
Post by: LoopCutter on October 22, 2017, 02:53:48 AM
On the OHT, do unlock the slider before trying to flick.
The Gerbers do not have slide lock do they? My Diesel does not. 


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Syncop8r on October 22, 2017, 04:13:37 AM
Do you mean the little lock that twists?
Title: Re: OHT owners club!
Post by: LoopCutter on October 22, 2017, 04:49:16 AM
Do you mean the little lock that twists?
Yes


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Bancomat85 on October 31, 2017, 06:21:28 PM
Hi guys!! Just picked up my new BO OHT, really nice tool!! But mine has the plier's head a little bit off center...not perfectly aligned, like someone has abused it. The tool is brand new... can i fix it myself? Or better ignore it and go on?
Title: Re: OHT owners club!
Post by: Syncop8r on October 31, 2017, 10:27:25 PM
Apparently that is common with these... mine are a tiny bit off-centre but the bigger issue is the replaceable cutters don't quite meet.
You could try the punch into the plier pivot method but looks hard to do on these without dismantling.  :think:
Title: Re: OHT owners club!
Post by: Bancomat85 on October 31, 2017, 10:47:16 PM
Apparently that is common with these... mine are a tiny bit off-centre but the bigger issue is the replaceable cutters don't quite meet.
You could try the punch into the plier pivot method but looks hard to do on these without dismantling.  :think:
What should i do?...
Title: Re: OHT owners club!
Post by: Syncop8r on October 31, 2017, 10:49:41 PM
How bad is it? Pics?
Title: Re: OHT owners club!
Post by: Bancomat85 on October 31, 2017, 11:01:32 PM
How bad is it? Pics?
Sorry, this is the best i can do with my phone...(https://uploads.tapatalk-cdn.com/20171031/3b01a8c55cf3256bfb4f93cea5d36428.jpg)(https://uploads.tapatalk-cdn.com/20171031/7b6dba53548f6d985043e780df34ffe5.jpg)
Title: Re: OHT owners club!
Post by: Syncop8r on October 31, 2017, 11:21:00 PM
Mine is the same, can move from being aligned to offset by the amount you have there. Do the cutters meet? If not, there is a workaround....
I would just live with it but then it's probably much more of a hassle for me to send back than it is for you.
Others may have other ideas/opinions....
Title: Re: OHT owners club!
Post by: gerleatherberman on November 01, 2017, 02:42:56 AM
 Sending back is a waste of time. Sent my first OHT back twice. Each time had new pliers. Both replacement pliers had the exact issue. However, the last pliers meet up well enough that they don't cross over when twisting medium duty wire. My BO OHT I got recently pliers were excellent though. Not perfect, but close! LM just said "smurf it" when designing the OHT. IMHO. The plier tolerance isn't my only beef with them either, but I won't go there. $80+ tools should be better than that.
Title: Re: OHT owners club!
Post by: Syncop8r on November 01, 2017, 03:56:39 AM
The plier tolerance isn't my only beef with them either, but I won't go there. $80+ tools should be better than that.
Actually I would be interested to hear what else is your beef. The plier tips/cutter alignment is the only issue on mine.
Title: Re: OHT owners club!
Post by: gerleatherberman on November 01, 2017, 05:33:38 AM
The plier tolerance isn't my only beef with them either, but I won't go there. $80+ tools should be better than that.
Actually I would be interested to hear what else is your beef. The plier tips/cutter alignment is the only issue on mine.
Let's see.
Flimsy handle scales.
Tools drag on said scales.
Ridiculous twist lock mechanism that has no positive positioning, so you can turn it and not know.
Plier spring system makes tool bulkier than necessary. It didn't need to be spring loaded. IMO.
Excessive hot spots when squeezing handles.
Can opener could have been nixed, small flat head put in its' place and much longer main blade could have filled an entire 'slot'.
Plier jaws only meet at the far tips. Holding thin stuff is not practical/possible.
No practical bit kit options.
Standard "molle" sheath is junk. The edge liner at the top tears within days.

But, on the flip side.
It is a good looking tool.
It is truly OHO all around, although best for us ambidextrous people.
Good driver shapes, even the '2d' phillips.
Strap cutter is fantastic.
Saw works well for the length.
Both blades insanely sharp and easy to resharpen.
Positive and strong tool lockup and closure with liner locks.

I am not a hater, but LM could have done a whole lot better with the OHT.
I own two OHTs and don't plan on getting rid of them. They make a great show-off tools.  :)
Title: Re: OHT owners club!
Post by: Syncop8r on November 01, 2017, 10:41:18 AM
OK so a mix of bad quality control and design features you don't agree with (which I do  ;) )
Title: Re: OHT owners club!
Post by: gerleatherberman on November 01, 2017, 01:57:04 PM
That is pretty much the TLDR of the rant I posted. Thank you. :)
But, like I mentioned, some of the things about the OHT are cool. Overall I have been spoiled rotten with tools such as the LM Surge/Wave, Vic SwissTool/Spirit, Gerber CD, &MP1. All of which I have gripes about too.
However,  with that being said, the OHT is a very good looking tool that many find more than adequate for their needs. :cheers:
Title: Re: OHT owners club!
Post by: Bancomat85 on November 01, 2017, 03:49:01 PM
Punch to the pivot method? How can i do it?
Title: Re: OHT owners club!
Post by: zoidberg on November 01, 2017, 09:27:36 PM
Punch to the pivot method? How can i do it?

I personally wouldn't bother because the slightly loose pliers give the spring room to function.
But if you must, pop off the two retaining link clips and remove the plier head.
Place one side of the plier pivot against something hard and hit the other side with a punch.
Title: Re: OHT owners club!
Post by: The Lone Wanderer on November 03, 2017, 03:12:51 AM
Overall, if I could find one on clearance or trade a few unused MTs away, OHT owners, would it be worth it?
Title: Re: OHT owners club!
Post by: Syncop8r on November 03, 2017, 03:41:50 AM
I don't regret mine. Love the look of the BO version most.
I haven't used it much but it has great fiddle-factor.  :D

Here's my 2c on your thoughts about it's shortcomings GLBM:

Flimsy handle scales. - Mine seem fine.
Tools drag on said scales. - Not an issue on mine.
Ridiculous twist lock mechanism that has no positive positioning, so you can turn it and not know. - Hasn't been a problem for me, although I tend to not lock it.
Plier spring system makes tool bulkier than necessary. It didn't need to be spring loaded. IMO. - I LOVE that the pliers are spring-action. :dd:
Excessive hot spots when squeezing handles. - I found the handles really comfortable.
Can opener could have been nixed, small flat head put in its' place and much longer main blade could have filled an entire 'slot'. - I think being aimed at military it needed to have a can opener.
Plier jaws only meet at the far tips. Holding thin stuff is not practical/possible. - I think there is a good reason for that... explained on another thread.  :think:
No practical bit kit options. - True, but I think it's meant to be self-contained multitool.
Standard "molle" sheath is junk. The edge liner at the top tears within days. - True, the pocket part especially. I also think it's a litttle too small for the OHT which doesn't help.
Title: Re: OHT owners club!
Post by: gerleatherberman on November 03, 2017, 04:42:05 AM
I don't regret mine. Love the look of the BO version most.
I haven't used it much but it has great fiddle-factor.  :D

Here's my 2c on your thoughts about it's shortcomings GLBM:

Flimsy handle scales. - Mine seem fine.
Tools drag on said scales. - Not an issue on mine.
Ridiculous twist lock mechanism that has no positive positioning, so you can turn it and not know. - Hasn't been a problem for me, although I tend to not lock it.
Plier spring system makes tool bulkier than necessary. It didn't need to be spring loaded. IMO. - I LOVE that the pliers are spring-action. :dd:
Excessive hot spots when squeezing handles. - I found the handles really comfortable.
Can opener could have been nixed, small flat head put in its' place and much longer main blade could have filled an entire 'slot'. - I think being aimed at military it needed to have a can opener.
Plier jaws only meet at the far tips. Holding thin stuff is not practical/possible. - I think there is a good reason for that... explained on another thread.  :think:
No practical bit kit options. - True, but I think it's meant to be self-contained multitool.
Standard "molle" sheath is junk. The edge liner at the top tears within days. - True, the pocket part especially. I also think it's a litttle too small for the OHT which doesn't help.
I am curious and no offense intended. And I thank you for the rebuttle. But, have you tried to EDC your OHT? I thought it was the bee's knees until I carried it a couple of weeks. That is when the handle scale/drag issues and grip discomfort became obvious. My plier lock remained off, but just putting it in the sheath would twist it sometimes. Absolutely no positive positioning on either of my OHTs plier locks. It was always a mystery if the pliers would flik out or not, because of it. I can remedy some of the issues, but I don't personally recommend the OHT at $80. My personal opinion is that there are several MTs in the price range that are superior.

But, in the end, MT assertions are mostly opinion/subjective observation really. I did not intend(or desire) to have an OHT debate, because it is all so subjective, but you asked me and I replied. :P
Title: Re: OHT owners club!
Post by: Syncop8r on November 03, 2017, 05:18:09 AM
Sorry for turning it into a debate! I'm not questioning your experiences, as you have said I asked for yours, and I have given mine. I'm just interested in others' points of view (and why they are different to mine!).  :cheers:
But, have you tried to EDC your OHT?
No to be fair I haven't. So I perhaps I would agree with you if I had.  :think:

I often wonder about a pocket clip on the OHT...

Title: Re: OHT owners club!
Post by: gerleatherberman on November 03, 2017, 05:41:48 AM
Sorry for turning it into a debate! I'm not questioning your experiences, as you have said I asked for yours, and I have given mine. I'm just interested in others' points of view (and why they are different to mine!).  :cheers:
But, have you tried to EDC your OHT?
No to be fair I haven't. So I perhaps I would agree with you if I had.  :think:

I often wonder about a pocket clip on the OHT...
It's all good.  :cheers:
It is important in the big MT picture that everyone voices their experiences. If it weren't for MT.O, I would still be using a Gerber pinchy and probably having my hand removed from persistent palm trauma.

The OHT has some cool things going on. And admittedly, I tend to be overly critical about MTs.
A pocket clip could be kind of neat. Looking at mine, the clip could possibly be installed by drilling out the handle pivot and using a new peen rivet to attach a pocket clip. Tricky part would be where to secure it on the out-facing scale below the bypass area. Looks like there is a space to create a lock point behind where the lg. flat head (one side) or phillips (other side) fold in. There is enough scale room for this in theory. This would allow a pretty deep ride in theory. Maybe one of the mod pros on here could chime in. I did look at plier clearance and see no reason this couldn't work. :ahhh
Title: Re: OHT owners club!
Post by: Syncop8r on November 03, 2017, 06:04:31 AM
I'm looking at the other end, secured by the pivot, passing through the hole at the top (or is it the bottom?) then folding down...

I like MTs primarily for their gadgetiness rather than their actual usefulness to me. Otherwise NONE of them would be worth the money (to me).  :pommel:
Title: Re: OHT owners club!
Post by: dks on November 04, 2017, 03:25:34 PM
Camo with free shot tool
Title: Re: OHT owners club!
Post by: Spartan19 on November 04, 2017, 10:10:26 PM
Very cool! :like:
Title: OHT owners club!
Post by: LoopCutter on November 07, 2017, 03:39:11 AM
Camo with free shot tool
Is that Camo or snake print?

It is very cool looking, and have never seen another in that pattern. 


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: dks on November 07, 2017, 06:08:30 PM
Camo with free shot tool
Is that Camo or snake print?

It is very cool looking, and have never seen another in that pattern. 


Sent from my iPhone using Tapatalk

on the box it said camo, but parts of it look like snake scales
Title: Re: OHT owners club!
Post by: LoopCutter on November 07, 2017, 11:01:38 PM
Did you purchase at a SHOT show?


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Syncop8r on November 07, 2017, 11:04:40 PM
Perfect for hiding in a rattlesnake den.
Title: Re: OHT owners club!
Post by: pietervn on November 08, 2017, 09:16:20 AM
Camo with free shot tool

Are these still available in the 'States? Sadly they never made it to Oz. I do like the print on it.

Pete
Title: Re: OHT owners club!
Post by: Bancomat85 on November 08, 2017, 12:05:43 PM
Hi guys! How can i do to remove the pliers on my oht? I thought that should it be easy, just removing the clip on the buttons... but they are stiff to remove and i'm afraid to break it... is this the right way or am i doing wrong?
Title: Re: OHT owners club!
Post by: Poncho65 on November 08, 2017, 12:10:53 PM
I think that is the first camo one I have seen as well :think: :o :like:
Title: Re: OHT owners club!
Post by: Poncho65 on November 08, 2017, 12:12:05 PM
Hi guys! How can i do to remove the pliers on my oht? I thought that should it be easy, just removing the clip on the buttons... but they are stiff to remove and i'm afraid to break it... is this the right way or am i doing wrong?

I think you are going about it right but I have never taken the plier head off mine so not for sure :whistle: :D Good luck though :cheers:
Title: Re: OHT owners club!
Post by: Syncop8r on November 08, 2017, 09:50:15 PM
I'm too scared to try. Maybe Zoidberg well chime in as it sounds like he has done it before...?
Title: Re: OHT owners club!
Post by: dks on November 09, 2017, 09:28:22 PM
the camo was bought in Vienna, high street.  It was on special and they had a few on offer, 99 Euro down from 130, but I saw it cheaper on eBay.  They also had the orange skeletool on offer

I will check if they have any more left in a couple of weeks.
Title: Re: OHT owners club!
Post by: Bancomat85 on November 09, 2017, 09:51:01 PM
I'm too scared to try. Maybe Zoidberg well chime in as it sounds like he has done it before...?
Zoidberg, show yourself!!
Title: Re: OHT owners club!
Post by: zoidberg on November 11, 2017, 02:24:56 AM
I'm too scared to try. Maybe Zoidberg well chime in as it sounds like he has done it before...?
Zoidberg, show yourself!!

Sorry mate, been away at a camp. Just remove the two retaining clips and lift the handles off the pliers.
Title: Re: OHT owners club!
Post by: Bancomat85 on November 11, 2017, 08:00:52 AM
I'm too scared to try. Maybe Zoidberg well chime in as it sounds like he has done it before...?
Zoidberg, show yourself!!

Sorry mate, been away at a camp. Just remove the two retaining clips and lift the handles off the pliers.
No prob mate...How the clips can be removed? Just with a little bit of roughness or there are other ways?i'm scared to break it...
Title: Re: OHT owners club!
Post by: zoidberg on November 11, 2017, 09:36:29 AM
I'm too scared to try. Maybe Zoidberg well chime in as it sounds like he has done it before...?
Zoidberg, show yourself!!

Sorry mate, been away at a camp. Just remove the two retaining clips and lift the handles off the pliers.
No prob mate...How the clips can be removed? Just with a little bit of roughness or there are other ways?i'm scared to break it...

(https://farm5.staticflickr.com/4555/24456997228_21bffa396b_b.jpg) (https://flic.kr/p/Dgbvd1)

(https://farm5.staticflickr.com/4551/37612264044_c6ee8c031c_b.jpg) (https://flic.kr/p/ZiEFH7)

(https://farm5.staticflickr.com/4566/37612259704_bc550c295b_b.jpg) (https://flic.kr/p/ZiEEqh)

(https://farm5.staticflickr.com/4565/38296040352_d846817a29_b.jpg) (https://flic.kr/p/21m6dzN)

(https://farm5.staticflickr.com/4525/38296036782_f3c714d1df_b.jpg) (https://flic.kr/p/21m6cwf)

(https://farm5.staticflickr.com/4532/38296032432_60b5cbbaa6_b.jpg) (https://flic.kr/p/21m6bef)

(https://farm5.staticflickr.com/4526/26553486049_5792d3ee54_b.jpg) (https://flic.kr/p/GsryhZ)

(https://farm5.staticflickr.com/4548/38296025292_1118a8caa5_b.jpg) (https://flic.kr/p/21m6979)

(https://farm5.staticflickr.com/4586/38296020952_d701c7a161_b.jpg) (https://flic.kr/p/21m67Pj)

(https://farm5.staticflickr.com/4549/24456978848_3574d7b532_b.jpg) (https://flic.kr/p/DgbpK7)

(https://farm5.staticflickr.com/4528/24456975688_581f205145_b.jpg) (https://flic.kr/p/DgboNC)

(https://farm5.staticflickr.com/4533/24456972568_54bf66808f_b.jpg) (https://flic.kr/p/DgbnSQ)

(https://farm5.staticflickr.com/4536/38296005682_38e91ed691_b.jpg) (https://flic.kr/p/21m63h3)
Title: Re: OHT owners club!
Post by: Poncho65 on November 11, 2017, 12:17:59 PM
Awesome pics Zoid :o :ahhh Very clear explnation in the pics on how to do this now :like: :like:
Title: Re: OHT owners club!
Post by: Syncop8r on November 11, 2017, 12:19:52 PM
Awesome pics Zoid :o :ahhh Very clear explnation in the pics on how to do this now :like: :like:
+1  :tu:
Title: Re: OHT owners club!
Post by: Bancomat85 on November 11, 2017, 12:32:00 PM
Wow!!! Thanks Zoid, really helpful!! I'll try tomorrow!!
Title: Re: OHT owners club!
Post by: Bancomat85 on November 12, 2017, 03:59:51 PM
I've tried to hammer and punch the pliers' pivot, but no results... i've tried to torque and bend a little bit the pliers' nose, but nothing... maybe is a sign of destiny, this OHT must remain as it is ... who knows...
Title: Re: OHT owners club!
Post by: Syncop8r on December 28, 2017, 11:39:15 PM
I've tried to hammer and punch the pliers' pivot, but no results... i've tried to torque and bend a little bit the pliers' nose, but nothing... maybe is a sign of destiny, this OHT must remain as it is ... who knows...
Try this: https://forum.multitool.org/index.php/topic,75195.msg1606879.html#msg1606879  :pok:
Title: Re: OHT owners club!
Post by: Smashie on December 28, 2017, 11:45:23 PM
I got a new one last week

(https://uploads.tapatalk-cdn.com/20171228/1823008251485d1a08e272674b0055a2.jpg)
Title: Re: OHT owners club!
Post by: Syncop8r on December 29, 2017, 12:08:05 AM
Nice!  :tu:
Title: Re: OHT owners club!
Post by: Glockfan on December 29, 2017, 01:06:01 AM
Awesome!   :like:
Title: Re: OHT owners club!
Post by: Poncho65 on December 29, 2017, 01:50:00 AM
Very nice Smashie :dd: :like:
Title: Re: OHT owners club!
Post by: NKlamerus on January 18, 2018, 11:27:35 PM
Been thinking about rejoining the club...I miss playing with it!

Really need to consider swapping in some Wingman scissors though, I could definitely lose the serated blade and a smaller tool to make it work.

Only other concern is Florida sand and salty air as usual....
Title: Re: OHT owners club!
Post by: Spartan19 on January 22, 2018, 10:37:34 PM
Had mine out today
Title: Re: OHT owners club!
Post by: Poncho65 on January 23, 2018, 11:44:18 AM
Nice one Spartan :cheers: :like:
Title: Re: OHT owners club!
Post by: Raoul Octav on January 28, 2018, 12:48:37 PM
Howdy, new to the club.
Many thx for the info
Title: Re: OHT owners club!
Post by: Syncop8r on January 28, 2018, 12:56:37 PM
Welcome!

Pics?  :pok:
Title: Re: OHT owners club!
Post by: Raoul Octav on January 29, 2018, 04:59:40 PM
mine
Title: Re: OHT owners club!
Post by: zoidberg on January 29, 2018, 08:56:16 PM
 :tu:   :like:
Title: Re: OHT owners club!
Post by: Syncop8r on January 29, 2018, 08:57:52 PM
:tu:   :like:
+1 :dd:
Title: Re: OHT owners club!
Post by: Poncho65 on February 02, 2018, 02:41:38 AM
Some great tools there :tu: :like: :like:
Title: Re: OHT owners club!
Post by: aikon2014 on February 26, 2018, 10:17:21 PM
Im curious if Bancomat85 got the pliers working, I miss my OHT, it's an awesome idea and would be awesome for my fishing when you hold the rod in one hand and want to unhook the fish with the other without lifting out of the water
Title: Re: OHT owners club!
Post by: Bancomat85 on February 26, 2018, 10:48:17 PM
Im curious if Bancomat85 got the pliers working, I miss my OHT, it's an awesome idea and would be awesome for my fishing when you hold the rod in one hand and want to unhook the fish with the other without lifting out of the water
I've tried, but no results.. I thought to send it in warranty, but is very difficult for me to separate myself from my baby...

Inviato dal mio MI MAX 2 utilizzando Tapatalk

Title: Re: OHT owners club!
Post by: aikon2014 on February 26, 2018, 11:26:05 PM
Im curious if Bancomat85 got the pliers working, I miss my OHT, it's an awesome idea and would be awesome for my fishing when you hold the rod in one hand and want to unhook the fish with the other without lifting out of the water
I've tried, but no results.. I thought to send it in warranty, but is very difficult for me to separate myself from my baby...

Inviato dal mio MI MAX 2 utilizzando Tapatalk

Have you tried the vice grip method? It worked super for me on rebar, wave and so on.
Title: Re: OHT owners club!
Post by: Bancomat85 on February 27, 2018, 08:06:11 AM
Im curious if Bancomat85 got the pliers working, I miss my OHT, it's an awesome idea and would be awesome for my fishing when you hold the rod in one hand and want to unhook the fish with the other without lifting out of the water
I've tried, but no results.. I thought to send it in warranty, but is very difficult for me to separate myself from my baby...

Inviato dal mio MI MAX 2 utilizzando Tapatalk

Have you tried the vice grip method? It worked super for me on rebar, wave and so on.
Nope! I've tu put the pivot in a vice, and try to tighten up, right?

Inviato dal mio MI MAX 2 utilizzando Tapatalk

Title: Re: OHT owners club!
Post by: aikon2014 on February 27, 2018, 09:28:02 PM
Vice grip pliers, I put one washer on each side that was about the same size and the pivot, and i clamped down really hard and turned clockwise and it tightened right up, it took a few tries to get it right though.
Title: Re: OHT owners club!
Post by: pietervn on March 29, 2018, 08:44:15 AM
Love my BO OHT, got some new boots for it

Pete
Title: Re: OHT owners club!
Post by: SteveC on March 29, 2018, 01:56:54 PM
Nice sheath, is that one of the new offerings from LM ?
Title: Re: OHT owners club!
Post by: pietervn on March 30, 2018, 03:37:48 AM
Nice sheath, is that one of the new offerings from LM ?

Thanks, sadly not. I got Gohard to make it for me. More info here: https://forum.multitool.org/index.php/topic,76630.msg1666999.html#msg1666999

Pete
Title: Re: OHT owners club!
Post by: marko14 on May 30, 2018, 08:31:56 PM
First post,great tool,cheers (https://uploads.tapatalk-cdn.com/20180530/569be62f7683fba9af367345e845986f.jpg)(https://uploads.tapatalk-cdn.com/20180530/2b629a0a787473dd6a5771ecc3a4ebbd.jpg)

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Obi1shinobee on May 30, 2018, 10:32:52 PM
First post,great tool,cheers (https://uploads.tapatalk-cdn.com/20180530/569be62f7683fba9af367345e845986f.jpg)(https://uploads.tapatalk-cdn.com/20180530/2b629a0a787473dd6a5771ecc3a4ebbd.jpg)

Sent from my SM-G960F using Tapatalk

Welcome to MTO    :dd: :dd: :dd: :like:
Title: Re: OHT owners club!
Post by: marko14 on May 30, 2018, 11:07:39 PM
Thanks🤙

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Poncho65 on May 31, 2018, 04:21:35 AM
Welcome to :MTO: and great pics and first posts :o :like: :like:
Title: Re: OHT owners club!
Post by: SteveC on May 31, 2018, 05:43:45 AM
Welcome Marko and nice pic !   :cheers:
Title: Re: OHT owners club!
Post by: marko14 on May 31, 2018, 09:04:20 AM
Thank you gentleman ,i gave him  nickname Bonecrusher (https://uploads.tapatalk-cdn.com/20180531/7c9bc22aa8d066851287c0bc77c174c9.jpg)(https://uploads.tapatalk-cdn.com/20180531/e2c20a294cae6e5c2a56ebd456e05fc3.jpg)(https://uploads.tapatalk-cdn.com/20180531/6a8a520e1c0ecd61421565149a326f08.jpg)

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Poncho65 on May 31, 2018, 11:40:16 AM
Tis a fine name :salute: :like: :like:
Title: Re: OHT owners club!
Post by: ThePeacent on May 31, 2018, 12:21:13 PM
Tis a fine name :salute: :like: :like:

certainly appropriate.  :like:
Title: Re: OHT owners club!
Post by: marko14 on June 02, 2018, 11:44:22 AM
Me again,work in progress...(https://uploads.tapatalk-cdn.com/20180602/df3e17efbf01c541efbfa36d554ca08a.jpg)

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Iron Man 2 on July 08, 2018, 01:13:22 AM
Here is the OHT with two cards :)
Title: Re: OHT owners club!
Post by: Poncho65 on July 08, 2018, 07:56:38 PM
Nice pics marko and Iron Man :tu: :like:
Title: Re: OHT owners club!
Post by: MMR on July 12, 2018, 09:16:16 PM
I will be joining you soon!  :cheers:

Just ordered mine....my first engraved leatherman too  :drool:

Can't wait to receive it!  :climber:
Title: Re: OHT owners club!
Post by: Poncho65 on July 13, 2018, 02:19:28 AM
Great to hear MMR :tu: Would love to see pics of it when it gets there :dd: :o :like:
Title: Re: OHT owners club!
Post by: MMR on July 13, 2018, 07:54:04 AM
Great to hear MMR :tu: Would love to see pics of it when it gets there :dd: :o :like:

Oh don’t worry, pictures will follow

I went for the “silver” one because; (1) I like the silver and black contrast, and (2) the silver one is becoming more rare now, not a lot of places have the silver one anymore, and those who do carve a premium for it, and I wanted mine to be as special to me as possible, so I got it engraved as well.


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: ThePeacent on July 13, 2018, 12:33:51 PM
Great to hear MMR :tu: Would love to see pics of it when it gets there :dd: :o :like:

Oh don’t worry, pictures will follow

I went for the “silver” one because; (1) I like the silver and black contrast, and (2) the silver one is becoming more rare now, not a lot of places have the silver one anymore, and those who do carve a premium for it, and I wanted mine to be as special to me as possible, so I got it engraved as well.


Sent from my iPhone using Tapatalk

SIlver looks way cooler IMO,  :multi:
excellent choice!!  :cheers:
Title: Re: OHT owners club!
Post by: MMR on July 14, 2018, 10:04:50 AM
Out of curiosity, apart from a nylon sheath, is there really no leather sheaths from leatherman that fits an OHT?

I really can't find any...



I found a few places that would custom make them, but they are quite expensive IMO

- https://nayscustomleather.com
- https://www.deadskin.co/leatherman-sheaths


I have been on to a guy locally here in ireland about having one custom made too, but before I receive my I can't send him measurements.




I am not a fan of leathermans molle sheath, I have one for my charge that I use for hiking, It fits my molle pack nicely, but I wouldn't want to carry it on my belt for EDC usage.
Title: Re: OHT owners club!
Post by: zoidberg on July 14, 2018, 12:07:35 PM
The OHT will fit into the LM leather sheath that I use for my Surge.

That said I tend to wear through LM leather or nylon sheaths quickly. Unless they are the old school ones.

If you are going custom then I can recommend one made by Gohard. Been using mine for a couple years now and it's still going strong.
Title: Re: OHT owners club!
Post by: ThePeacent on July 14, 2018, 12:29:23 PM
you could also find a Gerber/SOG/Schrade sheath that fits it, they are tough and big enough in many models  :salute:
Title: Re: OHT owners club!
Post by: Syncop8r on July 14, 2018, 12:51:53 PM
Out of curiosity, apart from a nylon sheath, is there really no leather sheaths from leatherman that fits an OHT?

I really can't find any...

My OHT came with the 'bad' molle sheath - there is a good one and a bad one they make - and it's quite a tight fit.
Title: Re: OHT owners club!
Post by: MMR on July 14, 2018, 01:15:43 PM
The OHT will fit into the LM leather sheath that I use for my Surge.

That said I tend to wear through LM leather or nylon sheaths quickly. Unless they are the old school ones.

If you are going custom then I can recommend one made by Gohard. Been using mine for a couple years now and it's still going strong.

Yeah, to my understanding Leathermans own leather sheaths wear through the elastic bands on the quickly if you put an OHT in one. Reason being the sliding mechanism on the sides of the OHT cuts into the elastic bands.

Do you have a link to Gohard?



you could also find a Gerber/SOG/Schrade sheath that fits it, they are tough and big enough in many models  :salute:

From what I can find: all the large Gerber and SOG sheaths are nylon?

I’m looking for leather sheaths

Do you know which models of Gerber/SOG/Schrade sheaths the OHT fits in? ...maybe that can expand my search a bit






Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: MMR on July 14, 2018, 01:26:58 PM
Out of curiosity, apart from a nylon sheath, is there really no leather sheaths from leatherman that fits an OHT?

I really can't find any...

My OHT came with the 'bad' molle sheath - there is a good one and a bad one they make - and it's quite a tight fit.

From what I can gather from different online reviews, it seems like most reviewers are not too happy about the included Molle sheath.

I’ll have to judge by myself once I receive my OHT, hopefully some time next week....or since it’s shipped with DPD; it will arrive sometime next year, and they will have tried to deliver it to my door 3 times (in the same day) without calling me once, so now I have to drive 2 hours to their “collection point”.

Anyway; the molle sheath I bought for my charge, was bought specifically for the Charge TTI  and even said on the packaging that it would fit the Charge TTI, but it is waaay too tall and it feels like it would fall out of it if I somehow ended up upside down, plus the “pocket” for the bit set is extremely awkwardly located in the front of it, which makes the front of the sheath hard when carrying the bit set, so the the sheath can’t close around the Charge tti properly.

So not the best design IMO.

But again; I’ll judge the included molle sheath once I receive my OHT, but I don’t have the highest expectations for it.


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: MMR on July 14, 2018, 01:32:53 PM
See what I mean...

(https://uploads.tapatalk-cdn.com/20180714/fa1096cdd64d9b29b9117621bc279f35.jpg)(https://uploads.tapatalk-cdn.com/20180714/c90ae658e81c742e231262565dec1157.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Syncop8r on July 14, 2018, 01:56:09 PM
Do you have a link to Gohard?
He is a member here, PM him. You can see some of his (and other members') work in the Sheaths section.
Title: Re: OHT owners club!
Post by: MMR on July 14, 2018, 02:13:50 PM
Do you have a link to Gohard?
He is a member here, PM him. You can see some of his (and other members') work in the Sheaths section.

Ah gotcha! ...will do, cheers!




Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Syncop8r on July 14, 2018, 10:53:53 PM
Actually there's a link to one of his creations at the top of this page.
Here it is again: https://forum.multitool.org/index.php/topic,76630.msg1666999.html#msg1666999
And another one: https://forum.multitool.org/index.php/topic,69193.0.html

Some info on Leatherman's molle sheaths:
https://forum.multitool.org/index.php/topic,55870.0.html
https://forum.multitool.org/index.php/topic,70659.0.html
Title: Re: OHT owners club!
Post by: zoidberg on July 15, 2018, 10:17:18 AM
Do you have a link to Gohard?

https://forum.multitool.org/index.php?action=profile;u=15635

(https://farm9.staticflickr.com/8296/29160031456_0f203e5469_b.jpg)
Title: OHT owners club!
Post by: MMR on July 15, 2018, 10:37:02 AM
I did PM Gohard; with all respect for him custom making them, he is asking a little more than I was hoping to spend on a sheath.

I might have to look at other alternatives


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: ThePeacent on July 15, 2018, 12:46:05 PM
I did PM Gohard; with all respect for him custom making them, he is asking a little more than I was hoping to spend on a sheath.

I might have to look at other alternatives


Sent from my iPhone using Tapatalk

Re: the other brands sheaths, I don't have a OHT but I guess it should be similar in size to a MP600,

(https://i.imgur.com/3a1kMsS.jpg)

Some options:
Show content
Large SOG Leather Sheath
https://www.heinnie.com/sog-powerlock-leather-pouch

for a Velcro one I also like Victorinox's greens sheath
https://www.victorinox.com/global/en/Products/Swiss-Army-Knives/Accessories/Nylon-Belt-Pouch/p/4.0822.4

then the Big Gerber Sheaths
https://www.gerber-tools.com/Gerber-Large-Multi-Function-Sheath-8764.htm

and my favorite Gerber sheath, the one from the Diesel  ::)
https://images-na.ssl-images-amazon.com/images/G/01/th/content_26/Q2_2009/Gerber-B000EDVU2K-3-lg.jpg

there are a few Schrade sheaths that are quality too and should fit the OHT  :salute:
https://uedata.amazon.com/Schrade-Leather-Sheath-Tool-Multi-tools/dp/B003N9P5S2
https://www.bladeforums.com/threads/how-do-i-loosen-up-a-schrade-usa-toughtool.503544/
Title: Re: OHT owners club!
Post by: Iron Man 2 on July 15, 2018, 04:22:36 PM
Here's mine!  8)
Title: Re: OHT owners club!
Post by: MMR on July 16, 2018, 07:45:24 AM
I did PM Gohard; with all respect for him custom making them, he is asking a little more than I was hoping to spend on a sheath.

I might have to look at other alternatives


Sent from my iPhone using Tapatalk

Re: the other brands sheaths, I don't have a OHT but I guess it should be similar in size to a MP600,

(https://i.imgur.com/3a1kMsS.jpg)

Some options:
Show content
Large SOG Leather Sheath
https://www.heinnie.com/sog-powerlock-leather-pouch

for a Velcro one I also like Victorinox's greens sheath
https://www.victorinox.com/global/en/Products/Swiss-Army-Knives/Accessories/Nylon-Belt-Pouch/p/4.0822.4

then the Big Gerber Sheaths
https://www.gerber-tools.com/Gerber-Large-Multi-Function-Sheath-8764.htm

and my favorite Gerber sheath, the one from the Diesel  ::)
https://images-na.ssl-images-amazon.com/images/G/01/th/content_26/Q2_2009/Gerber-B000EDVU2K-3-lg.jpg

there are a few Schrade sheaths that are quality too and should fit the OHT  :salute:
https://uedata.amazon.com/Schrade-Leather-Sheath-Tool-Multi-tools/dp/B003N9P5S2
https://www.bladeforums.com/threads/how-do-i-loosen-up-a-schrade-usa-toughtool.503544/


Good stuff, thank you!

Still waiting for my OHT to arrive, been searching around on google, I couldn’t find anything about the dimensions of the OHT.

Does anyone know the; Length, Height and Width of the OHT?


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Syncop8r on July 16, 2018, 07:59:11 AM
Just a quick measure....

Length: 116mm
Width: 47mm (measured where the lock is)
Thickness: 21mm
Title: Re: OHT owners club!
Post by: MMR on July 16, 2018, 09:54:52 PM
Just a quick measure....

Length: 116mm
Width: 47mm (measured where the lock is)
Thickness: 21mm

Thank you sir!  :cheers:

Title: Re: OHT owners club!
Post by: MMR on July 17, 2018, 08:31:51 PM
Just arrived in the mail today...


...I'm a little disappointed with the engraving to be honest....doesn't look as nice as I had hoped.  :(
Title: Re: OHT owners club!
Post by: MMR on July 17, 2018, 10:05:44 PM
I actually would really like to hear you guys (OHT owners); what your thoughts are on the OHT and some of the criticism it has received.

I (like most other people) watch youtube reviews and read review articles online, and I have gathered a list of common criticism that I could find.

Personally, I had a company supplied Leatherman Kick back when I worked in Building Maintenance (Around 2009-2010), when all the new guys were getting Leatherman Waves, the Kick felt inferior, even though it had all the tools I need in a multitool (I only ever use the pliers, screwdrivers and knife), but comparing it side by side to the Wave, made me feel like I was a Hatchback car at a Supercar meet.

Fast forward to 2015, I was standing in an outdoor store looking at a Charge TTi and seeing all the tools it has, then there I was determined to never have a multitool with just basic tools in it, so I payed 280 Euro for the Charge TTi.

Forward to today (2018), I have carried the Charge TTi as my EDC for the last 3 years, using it literally every day and taking it everywhere with me (Work, Traveling, Hiking, Camping....I even have it on me when I walk the dog)....but to be honest; I am still the same guy who only really use the pliers, screwdrivers and knife.

Saw is too small and will only cut through vegetation the thickness of my thumb, and i always have a folding saw with me every time I go into nature..but anyway..

I decided to give the OHT a try....

1) Again, I only ever use the pliers, screwdrivers and knife in my multi tool (basic tools)
2) I often find myself in a situation where I need to deploy my multi tool with one hand, for instance, while putting something up or taking something down (hold it with one hand and have a tool in the other).
3) I think the spring loaded pliers will be a great benefit, I really wish leatherman would incorporate spring loaded pliers in more of their models, as far as I know the OHT and Wingman are the only ones with spring loaded pliers.
4) Due to local laws and overall usage and needs I don't need a long knife.

Lets use this as a template for sharing your thoughts as well.

Quote
Leatherman OHT

Critiques
- Too large / Bulky & Small tool selection (“Juice’s tools in Surge’s frame”, the sliding mechanism takes up all the space for more tools - All for the compromise of the One Handed Operation)
- Heavy
- Expensive (100 Euro) = More expensive than a Rebar, Wave, Super Tool and other Leathermans with more tools in them.
- Bad build quality compared to other Leathermans (Mixed opinions, other say its top quality)
- Molle sheath sucks
- Weak spring in pliers (The mechanics used on the spring-action pliers has break-in period.)
- Knife too small
- Saw too small (only cut small vegetation: branches the size of your thumb, which you might as well break off)
- Flathead screw drivers have too short a reach
- Phillips head is 2D design
- No Pocket clip
- No lanyard ring
- “Silver” version is Grey and not silver
- Bit adaptor not designed for it and doesn’t fit very well. (Ganzo multi tools adaptor fits Phillips head *WeAllJuggleKnives* )
- Lock for sliding mechanism is annoying and useless (too easy to lock up)
- Bottle opener feels out of place, and should have been scissors instead (Scissors are one of the things that are essential for an infantryman in a tool of this kind (the MUT has scissors)))
- Cutting hook is not useful for most people’s usage (Again, keep in mind tool is designed for Military / Law Enforcement and First responders (EMT, Firemen etc.))
- No file
- Smallest flathead screwdriver is brittle and breaks easily.
- Unable to close tools with gloves on (Mixed opinions: others say it is done easily)
- Plier deployment has a bit of a Learning curve (You may be able to flick the pliers open in on shot, out of the box – but chances are it will take a week of fiddling before they find their way down their rails smoothly.)
- Pliers can destroy the inside of your pocket


Praises:
- Spring loaded pliers
- one handed / flick opening fliers
- replaceable cutter inserts
- Everything locks
- Super Durable Black Oxide Coating on tools
- Made In USA (isn’t all leathermans that?)
- Handle show the user the location of specific tools
- Super handy for people using their multi tool constantly or if you are standing on a ladder
- Tough bit of kit!
- OHT is a good option for the soldier looking for a multi-tool that will do the job but if you want a bit more in terms of tools then opt for the MUT

Suggestions for improvements
- Bit adaptor in the bottom
- Make phillips screwdriver compatible with bit kit


A few notes:

Notes about the OHT:
- Designed specifically to be 100% one handed operational “The Leatherman OHT was created to serve a much-needed niche in the multitool market: one-handed use.”(Thats it! …not designed to be anything else or revolutionary in terms of tool selection)
- SpeSmurfpillsed tool: The OHT is described as a heavy-duty multi-tool for tactical users. Primarily designed for Military / Law Enforcement and First responders (EMT, Firemen etc.) -

I'll go first:


Critiques

- Too large / Bulky & Small tool selection (“Juice’s tools in Surge’s frame”, the sliding mechanism takes up all the space for more tools - All for the compromise of the One Handed Operation)

I am not going to disagree with that, but for me that's not an issue.

- Heavy

It is actually surprisingly heavy, more heavy that my Charge TTi


- Expensive (100 Euro) = More expensive than a Rebar, Wave, Super Tool and other Leathermans with more tools in them.

I actually paid 107 Euro for mine, but yes it is on the expensive side. Even though it's a unique leatherman (like the crunch), I think it is too expensive for what it is....also like the Crunch.

- Bad build quality compared to other Leathermans (Mixed opinions, other say its top quality)

I just received mine, so I don't know how it will hold up over time, but I don't think its quality feels inferior out of the box at least.

- Molle sheath sucks

Well yes, leathermans Molle sheaths sucks in general, always have too....but that's not the OHT fault.

Remark: I know the OHT is primarily designed for military and servicemen, but they should really sell it with a belt sheath as well....I don't know of any first responders who carry Molle vests or belts either.


- Weak spring in pliers (The mechanics used on the spring-action pliers has break-in period.)

Again I just received mine, but out of the box I think mine feel fine....I don't see anything wrong with the spring tension.

- Knife too small

Don't know if it is "Too small", but is definitely small, around the size of a small pocket tool knife.

- Saw too small (only cut small vegetation: branches the size of your thumb, which you might as well break off)

I will have to agree, the saw is so small that they might as well not have included it, for me it will likely never see any use.

- Flathead screw drivers have too short a reach

About the same reach as the bit holder in my Leatherman Charge TTi.....I have not stumbled upon any times when I needed more reach on a flathead screw driver reaching for my multitool. Keep in mind, a multitool is intended as a backup, not as your primary tool


- Phillips head is 2D design

Yes, I wish it was a 3D design, but I will say that in 80-90% of occasions a 2D will do the job just fine.

- No Pocket clip

Correct, but for my that's not a problem.

- No lanyard ring

Also correct, but again, for me that's not a problem

- “Silver” version is Grey and not silver

Well it is more like "bare metal" coloured


- Bit adaptor not designed for it and doesn’t fit very well.

Well correct.....But that's not the point of the OHT either.

- Lock for sliding mechanism is annoying and useless (too easy to lock up)

I will have to use mine more to test that out. Again, I just received mine today.

- Bottle opener feels out of place, and should have been scissors instead (Scissors are one of the things that are essential for an infantryman in a tool of this kind (the MUT has scissors)))

I am not a beer drinker myself, and don't think I have ever used the bottle opener in my charge either. I will agree that, for the primary target group of the OHT (Military, Law Enforcement, First responders), it seems a bit like they just needed to fill the last tool slot with something and didn't really know what.

- Cutting hook is not useful for most people’s usage (Again, keep in mind tool is designed for Military / Law Enforcement and First responders (EMT, Firemen etc.))

Possibly, looks like it would make a nice box opener?


- No file

Correct.

- Smallest flathead screwdriver is brittle and breaks easily.

Again, for me: time will have to tell.

- Unable to close tools with gloves on (Mixed opinions: others say it is done easily)

Straight out of the box, it is a bit stiff. I think with a bit of wear they will start to loosen up. Since it is currently summer, my gloves are in the closet somewhere with all my winter clothes, so I will have to test this out at a later time.

- Plier deployment has a bit of a Learning curve (You may be able to flick the pliers open in on shot, out of the box – but chances are it will take a week of fiddling before they find their way down their rails smoothly.)


Yeah, this is true. First off its not as easy as just flicking it, you have to hold it in a certain way to flick it open. But I can also imagine that after a bit of usage they will have a wear pattern on the rails and slide out more easily.

- Pliers can destroy the inside of your pocket

I will have to test that out to be able to answer that.
Title: Re: OHT owners club!
Post by: Syncop8r on July 17, 2018, 10:52:52 PM
My 2c in blue:

Critiques

- Too large / Bulky & Small tool selection (“Juice’s tools in Surge’s frame”, the sliding mechanism takes up all the space for more tools - All for the compromise of the One Handed Operation)
I like pliers that fill my hand. I find many MTs to be too small.

- Heavy
It's not heavy. Well not for it's size - compare it to a Surge.

- Expensive (100 Euro) = More expensive than a Rebar, Wave, Super Tool and other Leathermans with more tools in them.
Aren't all MTs too expensive?  :think:

- Bad build quality compared to other Leathermans (Mixed opinions, other say its top quality)
Mine seems very well made, perhaps it is just that sliding pliers don't seem as robust.

- Molle sheath sucks
Well yes, leathermans Molle sheaths sucks in general, always have too....but that's not the OHT fault.
Not all LM molle sheaths suck - the XL is better. Did you read those threads I linked?  :pok:
Remark: I know the OHT is primarily designed for military and servicemen, but they should really sell it with a belt sheath as well....I don't know of any first responders who carry Molle vests or belts either.
You can wear a molle sheath on a belt.  :pok:

- Weak spring in pliers (The mechanics used on the spring-action pliers has break-in period.)
I haven't noticed a problem - happy with my spring-action pliers.

- Knife too small
Too small for what? I have never needed a bigger knife.

- Saw too small (only cut small vegetation: branches the size of your thumb, which you might as well break off)
Yes. All the other tools are fine being smaller, except the saw.

- Flathead screw drivers have too short a reach
Yes they are short but as yet that hasn't been an issue. It wasn't designed for electricians.

- Phillips head is 2D design
It's 2.5D.  ;)  Works fine.

- No Pocket clip
True. Perhaps it's a bit big to clip though.

- No lanyard ring
'Spose.

- “Silver” version is Grey and not silver
I prefer the all black anyway.

- Bit adaptor not designed for it and doesn’t fit very well.
Well correct.....But that's not the point of the OHT either.
Agree.... also it can fit on the small flathead if you must.

- Lock for sliding mechanism is annoying and useless (too easy to lock up)
Mine is neither so far.

- Bottle opener feels out of place, and should have been scissors instead (Scissors are one of the things that are essential for an infantryman in a tool of this kind (the MUT has scissors)))
I am not a beer drinker myself, and don't think I have ever used the bottle opener in my charge either. I will agree that, for the primary target group of the OHT (Military, Law Enforcement, First responders), it seems a bit like they just needed to fill the last tool slot with something and didn't really know what.
It's also a can opener, very handy for a soldier to have.

- Cutting hook is not useful for most people’s usage (Again, keep in mind tool is designed for Military / Law Enforcement and First responders (EMT, Firemen etc.))
I'm yet to properly use mine, we shall see...

- No file
True.

- Smallest flathead screwdriver is brittle and breaks easily.
Again, for me: time will have to tell.
As above.

- Unable to close tools with gloves on (Mixed opinions: others say it is done easily)
Don't know yet.

- Plier deployment has a bit of a Learning curve (You may be able to flick the pliers open in on shot, out of the box – but chances are it will take a week of fiddling before they find their way down their rails smoothly.)
You don't have to flick it - you can hold it by the buttons and use gravity.

- Pliers can destroy the inside of your pocket
Use the lock and/or don't wear it in your pocket.
Title: OHT owners club!
Post by: MMR on July 21, 2018, 09:16:20 PM
First mod to the OHT:

Delete Satan’s annoying locking thingy of doom!


(https://uploads.tapatalk-cdn.com/20180721/f97e567f299a6be00a06c1c8378990e2.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: MMR on July 21, 2018, 09:45:52 PM

Out of curiosity; is it normal that the two laws on the pliers are not the same size?

One of mine is like a kilometer wider than the other...


(https://uploads.tapatalk-cdn.com/20180721/6cd2e7b900ff219ce0fbfec62df3751c.jpg)(https://uploads.tapatalk-cdn.com/20180721/38bfe005b1b2fa850f2c32568de5c68a.jpg)(https://uploads.tapatalk-cdn.com/20180721/7265a9337a43ca47458124d592555eef.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Syncop8r on July 21, 2018, 11:30:53 PM
It's probably more normal that the pliers tips don't quite meet up than are different sizes.

...I'm a little disappointed with the engraving to be honest....doesn't look as nice as I had hoped.  :(
Looks nice to me.  :shrug:
What were you hoping for?
Title: Re: OHT owners club!
Post by: MMR on July 22, 2018, 03:08:32 PM
It's probably more normal that the pliers tips don't quite meet up than are different sizes.

...I'm a little disappointed with the engraving to be honest....doesn't look as nice as I had hoped.  :(
Looks nice to me.  :shrug:
What were you hoping for?

I was just expecting more of it, actually looks better in the picture than in real life.

I thought it would stand out a lot more clear, but it has sort of a faded look to it.


As the knife tugs away in the OHT, you don't really see or notice it either, they should give the option of doing the engraving on the handle instead of on the knife blade.

Especially when the knife is as small as it is.
Title: Re: OHT owners club!
Post by: Old man Chris on July 24, 2018, 11:49:14 PM
I’ve been a member for two years or so , impulse buy while in an outdoor gear supplier’s place . I haven’t carried it much , probably a shelf queen .

Chris
Title: Re: OHT owners club!
Post by: marko14 on October 30, 2018, 04:23:47 PM
Bonecrusher and Skyhawk

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: marko14 on November 02, 2018, 12:07:03 PM
Bonecrusher and Spartan.

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Poncho65 on November 02, 2018, 01:14:09 PM
Great pics marko :like: :like:
Title: Re: OHT owners club!
Post by: marko14 on November 02, 2018, 02:33:08 PM
Great pics marko :like: :like:
Thank you  Poncho

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: ThePeacent on November 18, 2018, 01:13:49 PM
Finally found the club, now consider me here assigned,
my OHT has no rub, and the jaws and tips are aligned
 :multi:

(https://i.imgur.com/g02VEBG.jpg)
Title: Re: OHT owners club!
Post by: SteveC on November 18, 2018, 02:09:46 PM
 :like: :tu:
Title: Re: OHT owners club!
Post by: marko14 on November 18, 2018, 04:06:55 PM
Finally found the club, now consider me here assigned,
my OHT has no rub, and the jaws and tips are aligned
 :multi:

(https://i.imgur.com/g02VEBG.jpg)
Welcome to the club.(https://uploads.tapatalk-cdn.com/20181118/b2e6053fd3f9d8848c426e16ca1c4e0e.jpg)(https://uploads.tapatalk-cdn.com/20181118/af8f67cd88893c873e6dfef772d9ca11.jpg)

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: ThePeacent on November 18, 2018, 04:48:53 PM
Welcome to the club.(https://uploads.tapatalk-cdn.com/20181118/b2e6053fd3f9d8848c426e16ca1c4e0e.jpg)(https://uploads.tapatalk-cdn.com/20181118/af8f67cd88893c873e6dfef772d9ca11.jpg)

Sent from my SM-G960F using Tapatalk

don't misplace it with that camo!  :ahhh :D
Title: Re: OHT owners club!
Post by: marko14 on November 18, 2018, 04:54:09 PM
Welcome to the club.(https://uploads.tapatalk-cdn.com/20181118/b2e6053fd3f9d8848c426e16ca1c4e0e.jpg)(https://uploads.tapatalk-cdn.com/20181118/af8f67cd88893c873e6dfef772d9ca11.jpg)

Sent from my SM-G960F using Tapatalk

don't misplace it with that camo!  :ahhh :D
Hahahahahah i won't,cheers.

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: ThePeacent on November 24, 2018, 02:51:34 PM
what the WIngman package opener does to plastic clamshell packaging,
the OHT hook cutter does to straps, plastic bands and tough wrapping
 :multi:


(https://i.imgur.com/WHdc09O.jpg)
Title: Re: OHT owners club!
Post by: LoopCutter on November 24, 2018, 05:01:18 PM
^+1.
 :iagree: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 24, 2018, 06:48:27 PM
Great pics Peacent and marko :like: :like:
Title: Re: OHT owners club!
Post by: marko14 on November 28, 2018, 10:21:13 PM
Great pics Peacent and marko :like: :like:
Thank you,cheers.

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: ThePeacent on December 01, 2018, 01:51:00 PM
all one handed,
but no clip  ??? :dunno:

(https://i.imgur.com/YiSr7OD.jpg)
Title: Re: OHT owners club!
Post by: Poncho65 on December 01, 2018, 11:15:40 PM
I see a clip on the light :whistle: but not on the rest of it :ahhh :ahhh Nice gear and pic, Peacent  :like: :like:
Title: Re: OHT owners club!
Post by: ThePeacent on December 02, 2018, 04:24:36 PM
I see a clip on the light :whistle: but not on the rest of it :ahhh :ahhh Nice gear and pic, Peacent  :like: :like:

I meant that the OHT boasts being all one handed but it has no clip,  :P thus you lose time and ease of access taking it out of the pouch to use it, which kind of defeats the purpose of its "quick one-handedness" :pok:
Title: Re: OHT owners club!
Post by: ThundahBeagle on December 02, 2018, 05:24:14 PM
Kev is doing something very generous and kind over in the General Tools board with his OHT Christmas GAW. Just wanted to say so without actually entering the GAW by posting there.

Mighty nice of you, Kev!
Title: Re: OHT owners club!
Post by: LoopCutter on December 03, 2018, 12:31:30 AM
I disassembled a vacuum today, to gather parts for a home unit, and the OHT was handy to me.  The One hand function helped me several times, as the other hand was holding a piece or assembly while I had to change from Phillips to straight blade, then deploy pliers.

I have not had to use my OHT lately, but when grabbed it performed flawlessly. 

Sorry, no picture(s),camera AWOL.
Title: Re: OHT owners club!
Post by: LoopCutter on December 03, 2018, 09:57:24 PM
As mentioned in previous post, the OHT performed well for me yesterday, and later that day I found the detail sheet for Military MTs and was very surprised  :facepalm: to learn the blade on the OHT is 154CM steel.

Is this news to any other OHT owners, or am I the only one who missed that detail? :oops:

Mine was purchased as a impulse buy when found deeply discounted as a close out item. 

Gaining some fondness to the OHT, mine is Black. :like:
Title: Re: OHT owners club!
Post by: zoidberg on December 04, 2018, 12:47:31 AM
No I believe the blades are 420HC. The replaceable wire cutters would be 154CM. Well that would be my guess anyway.
Title: Re: OHT owners club!
Post by: LoopCutter on December 04, 2018, 02:16:09 AM
No I believe the blades are 420HC. The replaceable wire cutters would be 154CM. Well that would be my guess anyway.
As expected you are correct :woohoo:
From LM OHT page.
Spring-action Needlenose Pliers
02Spring-action Regular Pliers
03Spring-action Premium Replaceable Hard-wire Cutters
04Spring-action Premium Replaceable Wire Cutters
05[420HC Knife
06420HC Serrated Knife
07Saw
08Strap Cutter
09#8-32 Cleaning Rod/Brush Adapter
10Can Opener
11Bottle Opener
12Oxygen Tank Wrench
13Phillips Screwdriver
14Large Screwdriver
15Medium Screwdriver
16Small Screwdriver
Title: Re: OHT owners club!
Post by: marko14 on December 04, 2018, 08:20:20 AM
(https://uploads.tapatalk-cdn.com/20181204/a2e8e7bff3a89f7ff16d1d6e0ed6c94c.jpg)

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: zoidberg on December 04, 2018, 10:49:30 AM
As expected you are correct :woohoo:

I don't expect it often. My kids know to question everything I tell them as well.   :facepalm:
Title: Re: OHT owners club!
Post by: Wspeed on December 29, 2018, 12:48:48 PM
Just got this delivered  :mail:
The OHT and a MTO badge from Kev D :woohoo:
Thanks again Kev for the excellent GAW  :cheers:
Title: Re: OHT owners club!
Post by: ThePeacent on December 29, 2018, 01:08:04 PM
Just got this delivered  :mail:
The OHT and a MTO badge from Kev D :woohoo:
Thanks again Kev for the excellent GAW  :cheers:

in black or in white,
this tool is a delight!  :salute:
Title: Re: OHT owners club!
Post by: Wspeed on December 29, 2018, 01:52:07 PM
Black and silver will deliver  :D
Title: Re: OHT owners club!
Post by: SteveC on December 29, 2018, 02:15:14 PM
(https://i.imgur.com/ioQozjP.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on December 29, 2018, 02:17:40 PM
Thanks Steve  :cheers: :like:
Title: Re: OHT owners club!
Post by: badwolf on December 29, 2018, 03:53:44 PM
Black and silver will deliver  :D
Just got this delivered  :mail:
The OHT and a MTO badge from Kev D :woohoo:
Thanks again Kev for the excellent GAW  :cheers:

in black or in white,
this tool is a delight!  :salute:
Black and black alright for Jack... Black and brown makes me frown... Black and silver like a crown :hatsoff:
Title: Re: OHT owners club!
Post by: Wspeed on December 29, 2018, 04:05:11 PM
 :rofl: :rofl: good one badwolf  :rofl: :rofl: :like:
Title: Re: OHT owners club!
Post by: Wspeed on December 29, 2018, 05:02:16 PM
Got a better pic of the gorgeous OHT  :dd: :like:
Title: Re: OHT owners club!
Post by: marko14 on December 29, 2018, 05:05:02 PM
Got a better pic of the gorgeous OHT  :dd: :like:
Niceeeeeeeeeeeeeee

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on December 29, 2018, 05:21:09 PM
Thanks marko  :cheers: :like:
Title: Re: OHT owners club!
Post by: gerleatherberman on December 29, 2018, 08:38:46 PM
Got a better pic of the gorgeous OHT  :dd: :like:
The two tone OHT is gorgeous for sure. :iagree:
Title: Re: OHT owners club!
Post by: Wspeed on December 29, 2018, 08:50:39 PM
Got a better pic of the gorgeous OHT  :dd: :like:
The two tone OHT is gorgeous for sure. :iagree:
Thanks GLBM  :cheers: :like:
I love how the OHT works I wasn’t expecting that  :D
Title: Re: OHT owners club!
Post by: marko14 on December 29, 2018, 09:30:17 PM
Got a better pic of the gorgeous OHT  :dd: :like:
The two tone OHT is gorgeous for sure. :iagree:
Thanks GLBM  :cheers: :like:
I love how the OHT works I wasn’t expecting that  :D
OHT rules, hahaha

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on December 29, 2018, 09:32:35 PM
It’s a good quality MT that’s for sure  :tu: :like:
Title: Re: OHT owners club!
Post by: Wspeed on December 30, 2018, 04:38:20 PM
Carrying the OHT today  :tu:
 :woohoo: :woohoo: :woohoo:
Title: Re: OHT owners club!
Post by: Poncho65 on December 30, 2018, 04:39:38 PM
Nice 8) :like:
Title: Re: OHT owners club!
Post by: Wspeed on December 30, 2018, 04:44:27 PM
Thanks Poncho  :cheers: :tu:
Title: Re: OHT owners club!
Post by: ThePeacent on December 30, 2018, 05:12:49 PM
among plants or between leaves
flicking the OHT stress relieves

(https://i.imgur.com/sXkmtD7.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on December 30, 2018, 05:17:10 PM
Nice one TP  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on December 30, 2018, 07:46:19 PM
Nice one TP  :like: :tu:

 :iagree: :like:
Title: Re: OHT owners club!
Post by: marko14 on January 04, 2019, 04:58:29 PM
Snow fun

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Poncho65 on January 04, 2019, 05:01:50 PM
Great pic marko :like: I sure do love all the brown and black LM :dd:
Title: Re: OHT owners club!
Post by: marko14 on January 04, 2019, 05:04:04 PM
Great pic marko :like: I sure do love all the brown and black LM :dd:
Thank you Poncho,cheers.

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on January 04, 2019, 05:32:15 PM
 :iagree: Nice pic of the OHT marko  :tu: :like:
Title: Re: OHT owners club!
Post by: marko14 on January 04, 2019, 05:38:59 PM
:iagree: Nice pic of the OHT marko  :tu: :like:
I have to agree with both of you,Haha,thanks WS,cheers.

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on January 04, 2019, 05:41:59 PM
:iagree: Nice pic of the OHT marko  :tu: :like:
I have to agree with both of you,Haha,thanks WS,cheers.

Sent from my SM-G960F using Tapatalk


:rofl: :tu: :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on February 04, 2019, 03:26:14 PM
Carrying the OHT today  :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on February 04, 2019, 05:43:28 PM
Carrying the OHT today  :tu:

 :like: :like:
Title: Re: OHT owners club!
Post by: Wspeed on February 04, 2019, 05:45:57 PM
 :cheers: :like:
Title: Re: OHT owners club!
Post by: marko14 on February 05, 2019, 02:54:21 PM
Carrying the OHT today  :tu:
Niceeeeeeeeeee

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on February 05, 2019, 02:55:11 PM
Thanks marko  :cheers: :like:
Title: Re: OHT owners club!
Post by: Max Stone on February 06, 2019, 03:21:44 PM
Just landed! My first OHT, and a Limited Edition Camo to boot. More pics when I get a chance later (sneaked this pic at work after delivery...)  :ahhh
Title: Re: OHT owners club!
Post by: Wspeed on February 06, 2019, 03:23:18 PM
Very nice OHT Max  :dd: :like: :like:
Title: Re: OHT owners club!
Post by: Max Stone on February 06, 2019, 03:25:24 PM
 :tu:
Title: Re: OHT owners club!
Post by: Max Stone on February 06, 2019, 05:41:59 PM
So the OHT began shipping worldwide in August 2012, initially in black or Coyote Tan, with silver added later for a short while.

The Camouflage model appears to have been a one-off run, sold together with a 'By the Numbers' #11 tool (or #12), to international markets in 1996.

The camo that Leatherman chose is an interesting design, based on a pattern released by KUIU in 2016 called Verde 2.0, for their clothing line. Presumably Leatherman licensed this pattern, or maybe not as there's no "under license" reference?

Here are some pictures of the KUIU camo and the OTH factory 'beauty' shots. The unboxing pics of the MT will follow in next posts.

Title: Re: OHT owners club!
Post by: Max Stone on February 06, 2019, 05:44:21 PM
Here are some unboxing images of the OTH Camo and #11 tool...
Title: Re: OHT owners club!
Post by: Max Stone on February 06, 2019, 05:46:40 PM
(Sorry about the upside down shots! Seems my PC orientation corrections don't carry through on the posts.)

Here are some final pictures...
Title: Re: OHT owners club!
Post by: Wspeed on February 06, 2019, 06:00:33 PM
Nice write up and pics Max  :cheers: :like:
The OHT looks good in your collection  :tu:
Title: Re: OHT owners club!
Post by: Max Stone on February 06, 2019, 06:20:56 PM
 Thanks WS :hatsoff:
Title: Re: OHT owners club!
Post by: Wspeed on February 06, 2019, 06:23:45 PM
Let us know what you think of the OHT
when you have had time to use it  :tu: :like:
Title: Re: OHT owners club!
Post by: Max Stone on February 06, 2019, 06:27:00 PM
Will do...so very different to any other Leatherman, needs an open mind  ???
Title: Re: OHT owners club!
Post by: Wspeed on February 06, 2019, 06:36:08 PM
Yes it’s definitely different  :tu: :like:
Title: Re: OHT owners club!
Post by: ThePeacent on February 06, 2019, 07:52:55 PM
Just landed! My first OHT, and a Limited Edition Camo to boot. More pics when I get a chance later (sneaked this pic at work after delivery...)  :ahhh

(https://i.imgur.com/08mcIPJ.gif)

that Camo is just  :o :o


The camo that Leatherman chose is an interesting design, based on a pattern released by KUIU in 2016 called Verde 2.0, for their clothing line. Presumably Leatherman licensed this pattern, or maybe not as there's no "under license" reference?


Verde means Green in Spanish  :tu:
Title: Re: OHT owners club!
Post by: Max Stone on February 06, 2019, 07:56:52 PM
Thanks TP, clever word choice by KUIU  :hatsoff:
Title: Re: OHT owners club!
Post by: Max Stone on February 06, 2019, 09:57:10 PM
If you look on Leatherman's web site (and almost any other site that lists the OHT), the tools are different to what they have been shipping since 2012.  :think:

1. Can opener profile now bigger
2. Small flat no longer tapered
3. Saw no longer has nail nick on the tip
4. SE blade chisel edge appears reversed
5. Strap cutter V is much smaller

I've waded through all the posts on this board and all the OHTs pictures show the original design (on the left).

So either Leatherman planned new tools for the OHT that never happened, or someone got creative in their marketing dept...any ideas?

Anyone seen these 'new' tools on a current OHT?
Title: Re: OHT owners club!
Post by: gerleatherberman on February 07, 2019, 03:29:14 AM
Interesting observation, Max. Thank you for posting it. :salute:

Checked both of my OHTs and their toolsets match the set on your camo version.
I have not seen an OHT with differing toolsets yet. Not sure LM would have updated the OHT anyway. The graphic on the right wouldn't fly, as it looks like all three flat drivers are similar in size. :ahhh
Title: Re: OHT owners club!
Post by: Wspeed on February 07, 2019, 12:24:39 PM
My OHT matches the toolset on your camo version as well  :tu: :like:
Title: Re: OHT owners club!
Post by: ThePeacent on February 07, 2019, 03:38:17 PM
mine has that toolset too  :dunno:

(https://i.imgur.com/Rolllg8.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on February 07, 2019, 03:40:46 PM
Nice pic TP :like: :tu:
Title: Re: OHT owners club!
Post by: Wspeed on February 07, 2019, 03:42:20 PM
I wonder if anyone on here has the other toolset  :dunno:
Title: Re: OHT owners club!
Post by: Max Stone on February 07, 2019, 03:46:39 PM
Thanks guys (nice pic TP).  :like:

I think at some point LM updated the graphic design of the OHT but it was never carried through to production. There’s no tool sharing with any other LM product (all the OHT tools & pliers are unique), so it’s not a very cost-effective product for LM as they have to manufacture everything just for the OHT. I expect this is a marginal line for LM and will be earmarked for EOL in the near future.  :(
Title: Re: OHT owners club!
Post by: marko14 on February 07, 2019, 04:00:41 PM
(Sorry about the upside down shots! Seems my PC orientation corrections don't carry through on the posts.)

Here are some final pictures...
Niceeeeeeeeee,welcome to the OHT club,cheers.

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Max Stone on February 07, 2019, 06:48:06 PM
(Sorry about the upside down shots! Seems my PC orientation corrections don't carry through on the posts.)

Here are some final pictures...
Niceeeeeeeeee,welcome to the OHT club,cheers.

Sent from my SM-G960F using Tapatalk

 :hatsoff:
Title: Re: OHT owners club!
Post by: Syncop8r on February 07, 2019, 08:10:32 PM
I think at some point LM updated the graphic design of the OHT but it was never carried through to production.
Perhaps it's a prototype pic before the tools evolved to what we know today.  :dunno:
Title: Re: OHT owners club!
Post by: Max Stone on February 07, 2019, 08:35:05 PM
You could be right Syncop8r. They may have done the design artwork before finalizing the tooling (probably outsourced) and as the camo model came out several years later, they used the correct designs for this artwork, but never rolled it back into what they had for the original black and CT versions. Who knows? Anyway, it’s a real minor thing that’s more of a curiosity, but technically you’re not getting exactly what LM show on their website when you buy an OHT.  ???
Title: Re: OHT owners club!
Post by: Wspeed on February 07, 2019, 08:48:50 PM
 :iagree: yes that is weird that they show the other toolset on their website :think:
Title: Re: OHT owners club!
Post by: Max Stone on February 08, 2019, 05:00:58 PM
So I used a Vic sheath today that’s a perfect fit (the black one supplied with the OHT is a very poor fit). But I thought I’m tempting bad karma carrying a LM in a Vic sheath, so I picked up a larger LM tan MOLLE today that has some side pockets, has plenty of space and is a good colour match for the OHT. Now I’m happy.   :tu:
Title: Re: OHT owners club!
Post by: Wspeed on February 08, 2019, 05:09:53 PM
Looks a nice sheath Max :like: :tu:
Title: Re: OHT owners club!
Post by: Syncop8r on February 08, 2019, 08:28:29 PM
Yeah the sheath that came with my OHT was a bit snug.
Plus it's the lesser quality one.
Title: Re: OHT owners club!
Post by: Wspeed on February 08, 2019, 08:36:18 PM
My sheath has never been used I just put it straight in the drawer  :D
Title: Re: OHT owners club!
Post by: Wspeed on February 08, 2019, 08:42:40 PM
The OHT I got came with the same sheath as yours Max :tu:
Title: Re: OHT owners club!
Post by: ThePeacent on February 08, 2019, 09:31:21 PM
The OHT I got came with the same sheath as yours Max :tu:

this was mine, the same I guess  :dunno:

(https://i.imgur.com/1Dr5nZH.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on February 08, 2019, 09:34:39 PM
What do you think of the sheath TP :think: :tu:
Title: Re: OHT owners club!
Post by: Max Stone on February 08, 2019, 10:07:48 PM
I guess a 3-letter acronym for Standard Operating Procedure, but backwards  :facepalm:

Maybe if it was grey it would fit better?
Title: Re: OHT owners club!
Post by: Wspeed on February 08, 2019, 10:21:49 PM
Probably  :rofl: :rofl: :like:
Title: Re: OHT owners club!
Post by: LoopCutter on February 08, 2019, 11:20:51 PM
Reading this thread made me want to take my OHT to work today.

Rode in the black Molle sheath.

The blades saw the most action and handled every job, cutting objects down to size. (https://uploads.tapatalk-cdn.com/20190208/bb66958884e281863c0e4df171757265.jpg)(https://uploads.tapatalk-cdn.com/20190208/53573f5ac94b592e592d44655fbe83e4.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Max Stone on February 08, 2019, 11:29:00 PM
Nice!  :like:

I’m beginning to think the OHT is one of the more under-appreciated MTs from Leatherman. With some practice, the pliers flick out effortlessly with one hand, and while some of the tools are a little short, this has not been a problem for me. Some ‘fixie’ users actually prefer a shorter blade as it’s easier to control the point for delicate work. Anyway, enjoy! :tu:
Title: Re: OHT owners club!
Post by: Wspeed on February 08, 2019, 11:52:56 PM
Nice pics LC :like: :tu:
Title: Re: OHT owners club!
Post by: LoopCutter on February 09, 2019, 12:25:17 AM
Thanks, and do understand the underused aspect.

I did try using for my work a couple summers ago, but it do not handle work related tasks as well ad the ST300 or even the Rebar.

This tool is thick and rides heavier on my belt with the molle sheath.   At work I have been using a SS Wave do to the blade access, so the OHT handles those tasks without issue. The springed needle nose may provide me with a challenge but will test and time will tell


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Max Stone on February 09, 2019, 07:30:50 AM
 :iagree:
OHT has a low tool ‘density’ for its size and weight. Bulky, so only practical carry option is a sheath (no lanyard or clip option anyway).
Title: Re: OHT owners club!
Post by: ThePeacent on February 09, 2019, 04:57:53 PM
What do you think of the sheath TP :think: :tu:

I've carried occasionally (most days really) since getting the OHT a few months ago,
and the sheath is visibly worn,  :o and holding up poorly  :cry: (loose threading, velcro malfunctioning... :rant:)

definitely one of the worst sheaths I've had  :ahhh
Title: Re: OHT owners club!
Post by: Max Stone on February 09, 2019, 05:29:38 PM
Yes, not a good design from LM. Basically a minimum cost product they could include with the OHT.  :facepalm:
Title: Re: OHT owners club!
Post by: Wspeed on February 09, 2019, 05:34:07 PM
What do you think of the sheath TP :think: :tu:

I've carried occasionally (most days really) since getting the OHT a few months ago,
and the sheath is visibly worn,  :o and holding up poorly  :cry: (loose threading, velcro malfunctioning... :rant:)

definitely one of the worst sheaths I've had  :ahhh
It’s a shame as they do look nice  :think:
I don’t use any of the pouches that come with MTs
As I only carry them in my front pocket of my jeans
as it has a smaller pocket that is perfect for carrying MTs
Title: Re: OHT owners club!
Post by: Poncho65 on February 10, 2019, 02:51:43 AM
Great pics, Max and LC :like:

I don't know if I have ever seen the camo model :o Very nice :drool: :dd: I do wish LM would make more camo models and not leave them to be one run or limited edition models :-\ that way the second hand market wouldn't hvae them marked ridiculously high :facepalm: :D
Title: Re: OHT owners club!
Post by: Max Stone on February 10, 2019, 10:05:47 AM
I have a suspicion that they did not have the license for the camo pattern from KUIU so they just did one run and abandoned the model. Another possibility is that it was an international order from one of the larger distributors (eg: in Australia) that resulted in this export only model, as it seems this model was never sold in the US. This could also be a way they sidestepped the KUIU pattern trademark as this would only apply to products sold in the US. Either way, it is a shame this model is no longer manufactured as it added some uniqueness to the OHT line that may have helped sales.  :dunno:
Title: Re: OHT owners club!
Post by: Wspeed on February 12, 2019, 05:25:32 PM
Carrying my OHT today  :tu:
(https://i.imgur.com/TYbk1PPh.jpg)
Title: Re: OHT owners club!
Post by: Poncho65 on February 12, 2019, 07:04:24 PM
Carrying my OHT today  :tu:
(https://i.imgur.com/TYbk1PPh.jpg)

 :like: :like:
Title: Re: OHT owners club!
Post by: Wspeed on February 12, 2019, 07:07:54 PM
Thanks Poncho  :cheers: :tu:
Title: Re: OHT owners club!
Post by: Syncop8r on February 12, 2019, 07:26:38 PM
 :like:
Title: Re: OHT owners club!
Post by: Wspeed on February 12, 2019, 07:33:46 PM
Thanks Syncop8r  :cheers: :like:
Title: Re: OHT owners club!
Post by: Syncop8r on February 20, 2019, 10:00:48 AM
OHTAK  :D

(http://gallery.multitool.org/var/resizes/Syncop8r/Leatherman-OHT/DSCF0923%20%281152%20x%20860%29.jpg?m=1550652547)
(http://gallery.multitool.org/var/resizes/Syncop8r/Leatherman-OHT/DSCF0925%20%281152%20x%20860%29.jpg?m=1550652598)
Title: Re: OHT owners club!
Post by: Poncho65 on February 20, 2019, 12:38:07 PM
Cool pics, Synco 8) You take it apart to just see what it looks like or something else :think: :pok: :D
Title: Re: OHT owners club!
Post by: Wspeed on February 20, 2019, 12:52:42 PM
 :iagree: cool pics Syncop8r are you planning some mods :popcorn: :like:
Title: Re: OHT owners club!
Post by: Max Stone on February 20, 2019, 05:55:34 PM
Can’t wait to see...  :popcorn:
Title: Re: OHT owners club!
Post by: Syncop8r on February 20, 2019, 08:22:04 PM
It needed a thorough clean so I took the pliers out. I thought some of you might want to see what they look like before I put it back together.
I cable-tied the handles together to make a 'pocket knife', just for a laugh.
Title: Re: OHT owners club!
Post by: Wspeed on February 20, 2019, 08:34:39 PM
Thanks Syncop8r for showing the pliers  :cheers: :like:
Title: Re: OHT owners club!
Post by: Poncho65 on February 20, 2019, 10:59:05 PM
Thanks Syncop8r for showing the pliers  :cheers: :like:

 :iagree: they are neat looking and even more reminiscent of a Gerber MP :ahhh :D

:nanadance:           :nanadance:
Title: Re: OHT owners club!
Post by: SteveC on February 21, 2019, 01:16:17 AM
It wouldn't be the first time someone screwed up on the LM website   :facepalm:
Title: Re: OHT owners club!
Post by: Max Stone on March 02, 2019, 09:27:27 AM
Short video showing the OHT flick deployment.  :tu:

https://youtu.be/6neXK6FqsI4 (https://youtu.be/6neXK6FqsI4)

Title: Re: OHT owners club!
Post by: Poncho65 on March 03, 2019, 04:16:40 PM
That one flicks open way better than mine :ahhh Plus that lovely camo :dd: :drool: :like:
Title: Re: OHT owners club!
Post by: Wspeed on March 03, 2019, 04:18:49 PM
Nice one Max  :like: :tu:
Title: Re: OHT owners club!
Post by: Wspeed on March 03, 2019, 05:05:02 PM
Carrying the OHT today  :tu:

(https://i.imgur.com/ucOFqfDh.jpg)
Title: Re: OHT owners club!
Post by: ThePeacent on March 03, 2019, 05:08:29 PM
Short video showing the OHT flick deployment.  :tu:

https://youtu.be/6neXK6FqsI4 (https://youtu.be/6neXK6FqsI4)

super fast and quick,
and that Camo is sick! :cheers:

Carrying the OHT today  :tu:

(https://i.imgur.com/ucOFqfDh.jpg)

color combo  ::) :gimme:

(https://i.imgur.com/4WsxXVm.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on March 03, 2019, 05:10:21 PM
Thanks  :cheers:
Nice selection of tools again TP  :like: :tu:
Title: Re: OHT owners club!
Post by: Max Stone on March 03, 2019, 08:36:59 PM
Nice selection TP.  :like:

The deployment on my OHT is very smooth. I do have some light lubrication on the rails which helps. Maybe also playing with it for a few days also loosened things up a little.  :think:

Dealer has a few more of the camo OHTs in stock but won’t move on the price (equivalent to $115).  :cry:
Title: Re: OHT owners club!
Post by: Wspeed on March 10, 2019, 04:59:12 PM
Carrying the OHT for today  :tu:

(https://i.imgur.com/ild1oQeh.jpg)

(https://i.imgur.com/EOikWOGh.jpg)
Title: Re: OHT owners club!
Post by: Poncho65 on March 10, 2019, 06:32:56 PM
Great pics Peacent and Ws  :like:
Title: Re: OHT owners club!
Post by: Wspeed on March 10, 2019, 06:37:30 PM
Thanks Poncho  :cheers: :like:
Title: Re: OHT owners club!
Post by: Wspeed on March 22, 2019, 02:37:15 PM
Carrying the OHT today  :tu:

(https://i.imgur.com/DzZKDrv.jpg)
Title: Re: OHT owners club!
Post by: Poncho65 on March 22, 2019, 03:09:24 PM
Great pic Ws :like:
Title: Re: OHT owners club!
Post by: Wspeed on March 22, 2019, 03:12:39 PM
Thanks Poncho  :hatsoff: :like:
Title: Re: OHT owners club!
Post by: Max Stone on March 23, 2019, 06:51:36 PM
Carrying the OHT today  :tu:

(https://i.imgur.com/DzZKDrv.jpg)

Love the silver and BO combo WS...have to think about that option  :think:
Title: Re: OHT owners club!
Post by: Wspeed on March 23, 2019, 06:57:53 PM
Thanks Max I really like this version  :cheers: :like:
Title: Re: OHT owners club!
Post by: LoopCutter on March 24, 2019, 05:28:51 PM
I pulled my BO OHT for today.
Picture just after wipe down -(https://uploads.tapatalk-cdn.com/20190324/6d54e6182ce26a870f370d891e65f208.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Wspeed on March 24, 2019, 05:31:18 PM
Nice pic LC :tu: :like:
Title: Re: OHT owners club!
Post by: Max Stone on March 24, 2019, 05:38:12 PM
+1  :like:
Title: Re: OHT owners club!
Post by: Poncho65 on March 24, 2019, 07:00:08 PM
Nice pic LC :tu: :like:

 :iagree: :like:
Title: Re: OHT owners club!
Post by: LoopCutter on March 24, 2019, 08:33:43 PM
Thanks guys!


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: marko14 on May 24, 2019, 06:17:09 PM
Bonecrusher and 5.11(https://uploads.tapatalk-cdn.com/20190524/3a46b0f26c73b56578c34987c2f98d02.jpg)

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on May 24, 2019, 06:26:27 PM
Cool pic marko :like: :tu:
Title: Re: OHT owners club!
Post by: marko14 on May 24, 2019, 06:29:47 PM
Cool pic marko :like: :tu:
Thank you,cheers.

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: LoopCutter on May 24, 2019, 11:28:21 PM
Very nice Marko!

I do like the color combo of yours.

Yet, could refresh my old memory why it’s named “BONECRUSHER”?


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: marko14 on May 25, 2019, 08:46:39 AM
Very nice Marko!

I do like the color combo of yours.

Yet, could refresh my old memory why it’s named “BONECRUSHER”?


Sent from my iPhone using Tapatalk
Thank you,transformers character Bonecrusher,cheers(https://uploads.tapatalk-cdn.com/20190525/2f6e4233955f250296ecbb5229b3b30f.jpg)

Sent from my E6653 using Tapatalk

Title: Re: OHT owners club!
Post by: Max Stone on May 25, 2019, 09:33:38 AM
Camo.  :tu:
Title: Re: OHT owners club!
Post by: Wspeed on May 25, 2019, 12:34:31 PM
Nice  :like: :tu:
Title: Re: OHT owners club!
Post by: marko14 on May 25, 2019, 12:40:19 PM
Camo.  :tu:
Coool

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Max Stone on May 25, 2019, 02:26:21 PM
Thanks marko14, WS.  :hatsoff:

Did you see the magnet?  :pok:
Title: Re: OHT owners club!
Post by: marko14 on May 25, 2019, 02:39:48 PM
Thanks marko14, WS.  :hatsoff:

Did you see the magnet?  :pok:
Yes

Sent from my E6653 using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on May 25, 2019, 02:52:23 PM
Thanks marko14, WS.  :hatsoff:

Did you see the magnet?  :pok:
Yes on the pliers  :tu:
Title: Re: OHT owners club!
Post by: Wspeed on May 25, 2019, 02:53:23 PM
The silver and black OHT  :tu:

(https://i.imgur.com/vFXqUMrh.jpg)
Title: Re: OHT owners club!
Post by: Poncho65 on May 25, 2019, 03:25:03 PM
Great pics marko, Max and Ws :like:
Title: Re: OHT owners club!
Post by: Wspeed on May 25, 2019, 03:28:36 PM
Thanks Poncho  :hatsoff: :like:
Title: Re: OHT owners club!
Post by: LoopCutter on May 25, 2019, 03:41:28 PM
Since all other variants are being shared, I will represent the BO model that I have in my collection with the reliefs highlighted. (https://uploads.tapatalk-cdn.com/20190525/a2b7bfda786c86a5b8c18ee9166f428d.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: marko14 on May 25, 2019, 04:20:54 PM
The silver and black OHT  :tu:

(https://i.imgur.com/vFXqUMrh.jpg)
Nice
Since all other variants are being shared, I will represent the BO model that I have in my collection with the reliefs highlighted. (https://uploads.tapatalk-cdn.com/20190525/a2b7bfda786c86a5b8c18ee9166f428d.jpg)


Sent from my iPhone using Tapatalk
Cool
Great pics marko, Max and Ws :like:
Thanks(https://uploads.tapatalk-cdn.com/20190525/25c4e4bd48b0750740f9d02f4cac2953.jpg)(https://uploads.tapatalk-cdn.com/20190525/f41ce8d03e6a2b451a9b866e12785177.jpg)

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on May 25, 2019, 05:17:13 PM
Thanks marko nice pic of yours  :cheers: :like: :tu:
Title: Re: OHT owners club!
Post by: marko14 on May 25, 2019, 05:48:18 PM
Thanks marko nice pic of yours  :cheers: :like: :tu:
Thanks, cheers

Sent from my E6653 using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on May 25, 2019, 05:50:12 PM
 :cheers:
Title: Re: OHT owners club!
Post by: Max Stone on May 25, 2019, 08:27:34 PM
Great pics marko, Max and Ws :like:
Thanks Poncho.  :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on May 27, 2019, 07:31:29 PM
More great pics LC and marko  :like:
Title: Re: OHT owners club!
Post by: marko14 on May 27, 2019, 08:17:26 PM
More great pics LC and marko  :like:
Thank you

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: marko14 on May 28, 2019, 06:02:24 PM
Bonecrusher (https://uploads.tapatalk-cdn.com/20190528/4bafdaad2f7221f2e618bbd164802cdb.jpg)

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on May 28, 2019, 06:04:56 PM
Good one marko  :tu: :like:
Title: Re: OHT owners club!
Post by: marko14 on May 28, 2019, 06:13:19 PM
Good one marko  :tu: :like:
Thank you Ws,cheers.

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on May 28, 2019, 06:47:10 PM
 :hatsoff:
Title: Re: OHT owners club!
Post by: marko14 on May 30, 2019, 05:50:34 PM
Should i use OHT (BONECRUSHER) for tooth extraction?
(https://uploads.tapatalk-cdn.com/20190530/525d8657131b009a530530631015d3b7.jpg)

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on May 30, 2019, 05:59:32 PM
Why not  :rofl: :rofl:
Title: Re: OHT owners club!
Post by: marko14 on May 30, 2019, 06:09:31 PM
Why not  :rofl: :rofl:
That's the spirit

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on May 30, 2019, 06:16:24 PM
 :2tu: :D
Title: Re: OHT owners club!
Post by: Poncho65 on May 31, 2019, 02:10:16 AM
 :ahhh :ahhh :ahhh
Title: Re: OHT owners club!
Post by: gerleatherberman on June 06, 2019, 12:41:41 AM
Should i use OHT (BONECRUSHER) for tooth extraction?
(https://uploads.tapatalk-cdn.com/20190530/525d8657131b009a530530631015d3b7.jpg)

Sent from my SM-G960F using Tapatalk
If a Dentist put an OHT in my mouth, I'd figure out how to get up and fly. :ahhh
Title: Re: OHT owners club!
Post by: marko14 on June 06, 2019, 03:26:09 PM
If a Dentist put an OHT in my mouth, I'd figure out how to get up and fly. :ahhh
Not if i catch you first

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Aloha on June 06, 2019, 10:04:27 PM
With enough Novocain I'm not sure we'd know what tool was used  :dunno:?  Tho that tool to the right of the OHT looks like the better tool for the job  :think:.   

Title: Re: OHT owners club!
Post by: marko14 on June 06, 2019, 10:35:38 PM
With enough Novocain I'm not sure we'd know what tool was used  :dunno:?  Tho that tool to the right of the OHT looks like the better tool for the job  :think:.
First question,totally agree with you.Second,forceps that you mentioned can be used only for extracting right upper first molar,so OHT (Bonecrusher) wins,after all it is MT

Sent from my E6653 using Tapatalk

Title: Re: OHT owners club!
Post by: Yoda on June 06, 2019, 10:36:35 PM
I've had my OHT for a couple of years and a love it! Deploying it is brilliant-glad the blades are a touch short and no file but still bloody brilliant
Title: Re: OHT owners club!
Post by: Syncop8r on June 06, 2019, 10:43:11 PM
Should i use OHT (BONECRUSHER) for tooth extraction?
(https://uploads.tapatalk-cdn.com/20190530/525d8657131b009a530530631015d3b7.jpg)
What's the tool in the middle with the three circles? I have bad memories of it...
Title: Re: OHT owners club!
Post by: marko14 on June 06, 2019, 10:50:10 PM
What's the tool in the middle with the three circles? I have bad memories of it...
Syringe for applying local anesthetic

Sent from my E6653 using Tapatalk

Title: Re: OHT owners club!
Post by: Syncop8r on June 06, 2019, 11:06:27 PM
Oh. That's not so bad. I was thinking of a thing that wraps a band around the tooth and gets tightened.  :dunno:
Title: Re: OHT owners club!
Post by: marko14 on June 06, 2019, 11:19:50 PM
Oh. That's not so bad. I was thinking of a thing that wraps a band around the tooth and gets tightened.  :dunno:
You were thinking on matrix,that is smaller, there are few systems for that purpose,main problem for patients is feeling of stabbing and increased pressure on gums,but it is necessary.

Sent from my E6653 using Tapatalk

Title: Re: OHT owners club!
Post by: Josh Connerly on June 07, 2019, 01:22:45 AM
Posted this on the modders club thread, but this is it's true home, it has no name, but I love him.
Title: Re: OHT owners club!
Post by: zoidberg on June 07, 2019, 01:33:33 AM
Nice one.   :tu:   :like:   Welcome to the boards Josh.   :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on June 07, 2019, 12:11:00 PM
Great mods :like: :tu:
Title: Re: OHT owners club!
Post by: zoidberg on June 19, 2019, 11:30:05 AM
Re uploading these by request.
Title: Re: OHT owners club!
Post by: zoidberg on June 19, 2019, 11:31:16 AM
.
Title: Re: OHT owners club!
Post by: zoidberg on June 19, 2019, 11:32:04 AM
.
Title: Re: OHT owners club!
Post by: zoidberg on June 19, 2019, 11:33:42 AM
.
Title: Re: OHT owners club!
Post by: Wspeed on June 19, 2019, 12:35:14 PM
Nice pics great to see how to take it apart zoidberg  :like: :tu:
Title: Re: OHT owners club!
Post by: zoidberg on June 19, 2019, 12:39:58 PM
:cheers:
Title: Re: OHT owners club!
Post by: Max Stone on June 19, 2019, 02:38:16 PM
Thanks zoidberg for sharing these pics. Even just to do a deep clean, good to know the process.  :like:
Title: Re: OHT owners club!
Post by: Corso on June 19, 2019, 11:03:23 PM
Much appreciated, thanks again!
Title: Re: OHT owners club!
Post by: zoidberg on June 24, 2019, 12:07:25 PM
Thought I would add these pics as well because they show the side being replaced.
They were part of the 30 day OHT challenge a couple years back.
Title: Re: OHT owners club!
Post by: Ivo on June 24, 2019, 12:20:00 PM
Nice pics zoidberg  :like:
Title: Re: OHT owners club!
Post by: zoidberg on June 24, 2019, 12:24:08 PM
:cheers:
Title: Re: OHT owners club!
Post by: Wspeed on June 24, 2019, 12:33:26 PM
Good job zoidberg  :like: :tu:
Title: Re: OHT owners club!
Post by: zoidberg on June 24, 2019, 12:38:05 PM
:cheers:
Title: Re: OHT owners club!
Post by: marko14 on August 14, 2019, 02:07:17 PM
Lawn mowing(https://uploads.tapatalk-cdn.com/20190814/cb8f51707105f62a494d1f5669110ed1.jpg)(https://uploads.tapatalk-cdn.com/20190814/7229c3b84451d965ac7c9882d10666f6.jpg)(https://uploads.tapatalk-cdn.com/20190814/2afcfcf9e742550f5fb51a443488bdf2.jpg)(https://uploads.tapatalk-cdn.com/20190814/17bcad18cd85a30fa1ce3bc7f8dabb73.jpg)

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on August 14, 2019, 02:41:09 PM
Cool pics and lovely dog marko  :like: :tu:
Title: Re: OHT owners club!
Post by: marko14 on August 14, 2019, 02:54:35 PM
Cool pics and lovely dog marko  :like: :tu:
Thanks Ws

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on August 14, 2019, 05:13:23 PM
 :2tu:
Title: Re: OHT owners club!
Post by: marko14 on October 08, 2019, 06:34:24 PM


Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on October 08, 2019, 07:10:20 PM
Nice one  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on October 08, 2019, 07:34:38 PM
Great pics,  marko :like:
Title: Re: OHT owners club!
Post by: Rapidray on October 08, 2019, 09:29:52 PM


Sent from my SM-G960F using Tapatalk
Cool colors  :cheers:
Title: Re: OHT owners club!
Post by: marko14 on October 08, 2019, 10:11:36 PM
Nice one  :like: :tu:
Great pics,  marko :like:
Cool colors  :cheers:
Cheers fellas

Sent from my E6653 using Tapatalk
Title: Re: OHT owners club!
Post by: LoopCutter on October 24, 2019, 10:20:19 PM
Calling all OHT owners.

Are you aware? November the OHT will be hosted as the challenge tool for the month. 

I know we have several members with this LM tool and I personally would enjoy learning of other member’s experiences with this model. The already is a very pretty yet manly badge designed for the 30 day.

Please hunt down the “OHT - Bonectusher” challenge to be part of the experience. 


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Max Stone on October 24, 2019, 10:37:10 PM
Already committed to the Nov discontinued SAKs challenge, but my camo OHT will be there in spirit.  :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on October 24, 2019, 11:37:16 PM
Already committed to the Nov discontinued SAKs challenge, but my camo OHT will be there in spirit.  :hatsoff:
A camo one! I like that! A lot!  :cheers:
Title: Re: OHT owners club!
Post by: LoopCutter on October 24, 2019, 11:44:03 PM
Yes, I do like your camp OHT


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Max Stone on October 25, 2019, 08:38:35 AM
A camo one! I like that! A lot!  :cheers:

Was a one-off run, sold together with a 'By the Numbers' #11 tool (or #12), to international markets in 1996.

The camo that Leatherman chose is an interesting design, based on a pattern released by KUIU called Verde 2.0, for their clothing line.

Seems Leatherman had to kill it as they used the pattern without permission/acknowledgement.
 :facepalm:

Paint’s a bit chippy on the edges.
Title: Re: OHT owners club!
Post by: marko14 on October 25, 2019, 01:53:10 PM
Already committed to the Nov discontinued SAKs challenge, but my camo OHT will be there in spirit.  :hatsoff:
To bad you can't join.

Sent from my E6653 using Tapatalk

Title: Re: OHT owners club!
Post by: Rapidray on October 25, 2019, 04:15:36 PM
Was a one-off run, sold together with a 'By the Numbers' #11 tool (or #12), to international markets in 1996.

The camo that Leatherman chose is an interesting design, based on a pattern released by KUIU called Verde 2.0, for their clothing line.

Seems Leatherman had to kill it as they used the pattern without permission/acknowledgement.
 :facepalm:

Paint’s a bit chippy on the edges.
Oh wow, that’s some great information to know! Will snap that one up if I find one!  :hatsoff: :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 01, 2019, 04:10:09 PM
(https://i.imgur.com/HAgtJjCh.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on November 01, 2019, 05:00:57 PM
Nice one Poncho  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on November 01, 2019, 06:10:49 PM
 :iagree:  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 01, 2019, 07:29:38 PM
Thanks Ws and Ray :hatsoff:
Title: Re: OHT owners club!
Post by: Wspeed on November 03, 2019, 04:39:07 PM
My OHT

(https://i.imgur.com/1IJcAtu.jpg)
Title: Re: OHT owners club!
Post by: Poncho65 on November 03, 2019, 07:52:43 PM
Great pic,  Ws  :like:
Title: Re: OHT owners club!
Post by: Wspeed on November 03, 2019, 08:33:38 PM
Thanks Poncho  :cheers: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on November 03, 2019, 09:50:35 PM
My OHT

(https://i.imgur.com/1IJcAtu.jpg)
Nice OH  :like: :tu:
Title: Re: OHT owners club!
Post by: Wspeed on November 03, 2019, 10:09:00 PM
Thanks Rapidray  :cheers: :tu:
Title: Re: OHT owners club!
Post by: LoopCutter on November 03, 2019, 10:38:47 PM
An outside picture, stuck knife into a tree-
(https://uploads.tapatalk-cdn.com/20191103/0c628a96cefc91c1fe9c40c4b654001d.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Poncho65 on November 03, 2019, 11:00:53 PM
Great pic,  LC :like:
Title: Re: OHT owners club!
Post by: Rapidray on November 03, 2019, 11:14:08 PM
An outside picture, stuck knife into a tree-
(https://uploads.tapatalk-cdn.com/20191103/0c628a96cefc91c1fe9c40c4b654001d.jpg)


Sent from my iPhone using Tapatalk
Nice looking BO  :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on November 03, 2019, 11:44:28 PM
Cool pic LC  :like: :tu:
Title: Re: OHT owners club!
Post by: LoopCutter on November 04, 2019, 03:42:44 AM
Thank you!!!


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Poncho65 on November 07, 2019, 07:37:35 PM
:dd:

(https://i.imgur.com/hvqEvLch.jpg)
Title: Re: OHT owners club!
Post by: Rapidray on November 07, 2019, 08:12:58 PM
:dd:

(https://i.imgur.com/hvqEvLch.jpg)
Very nice!  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 07, 2019, 08:54:57 PM
Thanks Ray :hatsoff:
Title: Re: OHT owners club!
Post by: Wspeed on November 07, 2019, 09:35:28 PM
Nice one Poncho  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 08, 2019, 12:42:30 AM
Thanks Ws  :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on November 09, 2019, 10:48:27 PM
(https://i.imgur.com/5653VsOh.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on November 09, 2019, 11:28:30 PM
Nice pic Poncho  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 10, 2019, 01:39:13 AM
Thanks Ws  :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on November 10, 2019, 02:27:39 AM
(https://i.imgur.com/5653VsOh.jpg)
I like the color on the that...just right! :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 10, 2019, 07:08:26 AM
Thanks Ray :hatsoff: I wish the image had been just a little more sharp :ahhh but I did like it overall :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 11, 2019, 03:44:44 PM
(https://i.imgur.com/Ctp6wJnh.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on November 11, 2019, 04:13:10 PM
Nice pic Poncho  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on November 12, 2019, 02:52:20 AM
 :iagree: :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 12, 2019, 03:38:44 AM
Thanks Ws and Ray :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on November 14, 2019, 05:53:04 PM
 8)

(https://i.imgur.com/sszjVV5h.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on November 14, 2019, 06:45:16 PM
Nice pic Poncho  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 14, 2019, 07:34:24 PM
Thanks Ws :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on November 14, 2019, 11:11:15 PM
8)

(https://i.imgur.com/sszjVV5h.jpg)
Sweet photo there!  :like: :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 15, 2019, 12:36:59 AM
Thanks Ray :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on November 17, 2019, 04:51:59 PM
OHT! :D
Title: Re: OHT owners club!
Post by: Wspeed on November 17, 2019, 04:53:21 PM
Nice pic Poncho  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 17, 2019, 04:53:53 PM
Thanks Ws :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on November 17, 2019, 05:35:18 PM
OHT! :D
Nice one  :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 18, 2019, 02:43:49 AM
Thanks Ray :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on November 19, 2019, 06:48:05 PM
(https://i.imgur.com/fe2Olv9h.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on November 19, 2019, 07:00:22 PM
Nice one Poncho  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 19, 2019, 07:09:21 PM
Thanks Ws  :hatsoff:
Title: Re: OHT owners club!
Post by: Wspeed on November 19, 2019, 08:39:33 PM
 :salute:
Title: Re: OHT owners club!
Post by: Rapidray on November 20, 2019, 12:02:31 AM
(https://i.imgur.com/fe2Olv9h.jpg)
:like: :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 21, 2019, 09:33:28 PM
(https://i.imgur.com/2wdMBlXh.jpg)
Title: Re: OHT owners club!
Post by: Poncho65 on November 21, 2019, 09:33:53 PM
Thanks Ws and Ray  :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on November 21, 2019, 09:36:24 PM
Nice  :like: :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 21, 2019, 09:36:59 PM
Thanks Ray  :hatsoff:
Title: Re: OHT owners club!
Post by: Wspeed on November 21, 2019, 10:13:43 PM
Nice pic Poncho  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 22, 2019, 02:14:59 AM
Appreciate it Ws :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on November 22, 2019, 07:59:12 PM
(https://i.imgur.com/96i1Tilh.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on November 22, 2019, 08:08:22 PM
Nice pic Poncho  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 22, 2019, 08:18:24 PM
Thanks Ws  :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on November 23, 2019, 02:30:52 AM
(https://i.imgur.com/96i1Tilh.jpg)
Nice OHT  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 23, 2019, 05:08:04 AM
Thanks Ray :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on November 25, 2019, 02:34:09 AM
(https://i.imgur.com/vCkZAgnh.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on November 25, 2019, 01:29:45 PM
Nice  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on November 25, 2019, 04:15:37 PM
 :iagree: :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 25, 2019, 08:35:16 PM
Thanks Ws and Ray  :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on November 27, 2019, 04:23:13 PM
(https://i.imgur.com/1nEIqgFh.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on November 27, 2019, 04:28:17 PM
Cool pic Poncho  8) :like:
Title: Re: OHT owners club!
Post by: Poncho65 on November 27, 2019, 06:36:45 PM
Thanks Ws :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on November 27, 2019, 07:04:52 PM
(https://i.imgur.com/1nEIqgFh.jpg)
Nice OHT!  :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 27, 2019, 08:23:33 PM
Thanks Ray  :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on November 28, 2019, 10:18:00 PM
(https://i.imgur.com/s6XDyKVh.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on November 28, 2019, 10:18:31 PM
Nice pic Poncho  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 28, 2019, 10:19:26 PM
Thanks Ws  :hatsoff:
Title: Re: OHT owners club!
Post by: Wspeed on November 28, 2019, 10:22:43 PM
 :2tu:
Title: Re: OHT owners club!
Post by: LoopCutter on November 29, 2019, 01:12:08 AM
(https://uploads.tapatalk-cdn.com/20191129/a2d5ce7579bade911542f5235b8c504a.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Rapidray on November 29, 2019, 03:35:13 AM
(https://i.imgur.com/s6XDyKVh.jpg)
Nice one!  :tu:
Title: Re: OHT owners club!
Post by: Rapidray on November 29, 2019, 03:36:36 AM
(https://uploads.tapatalk-cdn.com/20191129/a2d5ce7579bade911542f5235b8c504a.jpg)


Sent from my iPhone using Tapatalk
I love how the tool is printed on the scales!  :like: :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on November 29, 2019, 01:23:35 PM
Nice pic LC  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 29, 2019, 05:26:15 PM
Great pic, LC :like: and thanks Ray :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on November 29, 2019, 10:16:48 PM
(https://i.imgur.com/rGenNmCh.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on November 29, 2019, 11:12:07 PM
Nice  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on November 30, 2019, 03:11:12 AM
 :hatsoff: Ws :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on November 30, 2019, 04:32:00 AM
Nice OHT  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on November 30, 2019, 06:21:08 AM
Thanks Ray :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on November 30, 2019, 05:55:17 PM
Last pic of the OHT for a while from me, probably :D

(https://i.imgur.com/BGv7v5jh.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on November 30, 2019, 05:57:58 PM
Nice one Poncho  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on November 30, 2019, 06:52:39 PM
Last pic of the OHT for a while from me, probably :D

(https://i.imgur.com/BGv7v5jh.jpg)
:like:
Title: Re: OHT owners club!
Post by: Poncho65 on November 30, 2019, 07:11:04 PM
Thanks Ws and Ray :hatsoff:
Title: Re: OHT owners club!
Post by: Wspeed on November 30, 2019, 07:12:29 PM
 :2tu:
Title: Re: OHT owners club!
Post by: LoopCutter on November 30, 2019, 09:21:56 PM
I love how the tool is printed on the scales!  :like: :cheers:
They are all stamped with the tool outline, the BO when worn shows them very well. 

PM me your address and I will forward it to you in appreciation of the BO as well as cheerleading the challenge. 

Really!


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Poncho65 on November 30, 2019, 09:29:35 PM
Wow :o Very generous of you LC :like: It has been great having him with us during the challenge for sure :salute: Thanks for everyone that has commented along and followed us :tu: :like:
Title: Re: OHT owners club!
Post by: Mechanickal on November 30, 2019, 09:55:33 PM
I'm liking the MP600 alot...
So might see a OHT ending up in my hands one day :D

I guess Gerber was first, right?
Title: Re: OHT owners club!
Post by: Poncho65 on November 30, 2019, 09:57:39 PM
With the sliding design, yes but I think LM was only getting them back for copying the PST  :D
Title: Re: OHT owners club!
Post by: LoopCutter on November 30, 2019, 10:16:31 PM
The Gerber has the tools inside requiring pliers to be deployed to open the handle enough to access tools.
The OHT is better in that the tools are accessible from the outside and pretty much One Handed at that. 

The plier head is nice, very much like those on my Charge with replaceable cutters. 


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: Mechanickal on November 30, 2019, 10:21:45 PM
You should become a seller LC :D
Title: Re: OHT owners club!
Post by: Rapidray on November 30, 2019, 11:27:47 PM
They are all stamped with the tool outline, the BO when worn shows them very well. 

PM me your address and I will forward it to you in appreciation of the BO as well as cheerleading the challenge. 

Really!


Sent from my iPhone using Tapatalk
Pm sent and yes I’m still at a loss for words.
Thank you so much  :hatsoff:
Title: Re: OHT owners club!
Post by: Wspeed on November 30, 2019, 11:37:00 PM
Nice one LC  :cheers: :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 16, 2020, 03:25:05 PM
This one came in yesterday - a gift from LoopCutter - thank you!  :hatsoff:

Title: Re: OHT owners club!
Post by: SteveC on January 16, 2020, 03:45:26 PM
Another great MTo story of generosity  :like: :tu:
Title: Re: OHT owners club!
Post by: Wspeed on January 16, 2020, 04:36:26 PM
 :iagree: Very generous  :like: :tu:
Title: Re: OHT owners club!
Post by: SA on January 16, 2020, 04:44:31 PM
How do you guys find the handle splay on the OHT?
I like how small the splay is on the mp600. Comparable or no?
Title: Re: OHT owners club!
Post by: Rapidray on January 16, 2020, 06:13:23 PM
How do you guys find the handle splay on the OHT?
I like how small the splay is on the mp600. Comparable or no?
When closed they feel about the same but the 600 is thinner. When open the 600 is wider, but you have to manually open it. When the OHT opens, or deployed,  it opens on it’s own. Very nice!
The OHT shines on the opening and tool access when it is closed. The 600 has to be opened to access the tools.
Title: Re: OHT owners club!
Post by: Poncho65 on January 16, 2020, 09:16:16 PM
Another great MTo story of generosity  :like: :tu:

 :iagree: And great pic, Ray  :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 16, 2020, 09:20:29 PM
Thanks Poncho  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on January 17, 2020, 04:36:09 AM
 :2tu:
Title: Re: OHT owners club!
Post by: Rapidray on January 17, 2020, 02:03:25 PM
No uses, as the Ranger is doing all the work
Title: Re: OHT owners club!
Post by: Wspeed on January 17, 2020, 02:05:19 PM
Nice  :like: :tu:
Title: Re: OHT owners club!
Post by: LoopCutter on January 17, 2020, 02:06:39 PM
A very nice duo! :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 17, 2020, 02:13:24 PM
A very nice duo! :like:
Thank you  :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on January 17, 2020, 02:13:50 PM
Nice  :like: :tu:
Thanks  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on January 17, 2020, 04:42:32 PM
A very nice duo! :like:

 :iagree: :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 17, 2020, 08:21:45 PM
Nice  :like: :tu:
Thanks  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on January 17, 2020, 08:22:17 PM
A very nice duo! :like:
Thank you Sir  :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on January 19, 2020, 04:33:18 PM
Today’s backup
Title: Re: OHT owners club!
Post by: Wspeed on January 19, 2020, 04:33:45 PM
Nice one Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on January 19, 2020, 04:39:36 PM
Thank you  :cheers: :drink:
Title: Re: OHT owners club!
Post by: Rapidray on January 20, 2020, 02:22:17 PM
Today’s carry
Title: Re: OHT owners club!
Post by: SteveC on January 20, 2020, 02:24:55 PM
 :like: :tu:
Title: Re: OHT owners club!
Post by: Wspeed on January 20, 2020, 02:29:58 PM
Cool pic Rapidray  8) :like:
Title: Re: OHT owners club!
Post by: Poncho65 on January 20, 2020, 04:51:22 PM
Great pics, Ray :like:
Title: Re: OHT owners club!
Post by: David on January 20, 2020, 05:58:32 PM
Great pics, Ray :like:

 :iagree:
Title: Re: OHT owners club!
Post by: David on January 20, 2020, 05:59:45 PM
(https://i.imgur.com/rGenNmCh.jpg)

Really like that pic Poncho!     :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 20, 2020, 10:23:06 PM
:like: :tu:
Thanks Steve!  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on January 20, 2020, 10:23:36 PM
Cool pic Rapidray  8) :like:
Thanks  :cheers: :drink:
Title: Re: OHT owners club!
Post by: Rapidray on January 20, 2020, 10:24:06 PM
Great pics, Ray :like:
Thanks Poncho  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on January 20, 2020, 10:25:08 PM
:iagree:
Loving this one was real easy!  :rofl:
Has some great things going for it!
Title: Re: OHT owners club!
Post by: Poncho65 on January 21, 2020, 12:53:03 PM
Really like that pic Poncho!     :like:

Thanks David :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on January 21, 2020, 03:20:41 PM
Nice one for sure
Title: Re: OHT owners club!
Post by: Wspeed on January 21, 2020, 09:52:38 PM
It’s wearing nicely  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on January 21, 2020, 10:03:01 PM
Yes it is...like those black Alox with the nice worn look on them that we like so much!  :cheers: :drink:
Title: Re: OHT owners club!
Post by: Wspeed on January 21, 2020, 11:07:53 PM
 :drink: :D
Title: Re: OHT owners club!
Post by: Poncho65 on January 22, 2020, 04:02:18 AM
Great pic, Ray :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 22, 2020, 04:51:47 AM
I do like it!  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on January 23, 2020, 02:23:05 PM
Yes

Title: Re: OHT owners club!
Post by: Wspeed on January 23, 2020, 02:24:02 PM
Nice one  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on January 23, 2020, 02:35:48 PM
Thank you sir  :cheers: :drink:
Title: Re: OHT owners club!
Post by: Wspeed on January 23, 2020, 02:36:40 PM
 :cheers: :drink: :D
Title: Re: OHT owners club!
Post by: LoopCutter on January 24, 2020, 01:15:13 AM
That appears to be one happy OHT!
Title: Re: OHT owners club!
Post by: Rapidray on January 24, 2020, 01:43:25 AM
That appears to be one happy OHT!
Yes sir - it is  :cheers:  :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on January 24, 2020, 04:26:19 AM
Another great OHT pic, Ray :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 24, 2020, 04:53:38 AM
Thanks Poncho  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on January 24, 2020, 06:39:49 PM
Doing backup duty

Title: Re: OHT owners club!
Post by: Wspeed on January 24, 2020, 06:59:32 PM
Nice one Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on January 24, 2020, 10:35:29 PM
Thanks Ws  :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on January 24, 2020, 10:47:02 PM
 :cheers: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on January 25, 2020, 04:07:36 AM
Nice one Rapidray  :like: :tu:

 :iagree: :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 25, 2020, 04:50:19 AM
Thank you sir!  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on January 25, 2020, 12:58:07 PM
 :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on January 25, 2020, 03:39:24 PM
Today’s
Title: Re: OHT owners club!
Post by: Wspeed on January 25, 2020, 04:26:56 PM
Looking good  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on January 25, 2020, 06:27:59 PM
Thanks  :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on January 25, 2020, 06:28:22 PM
 :cheers: :drink: :D
Title: Re: OHT owners club!
Post by: Rapidray on January 25, 2020, 06:30:13 PM
 :cheers: :drink: :woohoo:
Title: Re: OHT owners club!
Post by: Wspeed on January 25, 2020, 06:47:13 PM
 :D
Title: Re: OHT owners club!
Post by: Poncho65 on January 26, 2020, 02:57:32 AM
Looking good  :like: :tu:

 :iagree: :like:
Title: Re: OHT owners club!
Post by: marko14 on January 26, 2020, 10:34:10 AM
Yes
Awesom photo,mine doing some work

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on January 26, 2020, 01:42:46 PM
Great use marko  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on January 27, 2020, 12:25:17 PM
 :iagree: :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 27, 2020, 03:57:38 PM
Awesom photo,mine doing some work

Sent from my SM-G960F using Tapatalk
Nice use!  :like: :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on January 27, 2020, 03:59:10 PM
Today’s back up to the Ranger challenge

Title: Re: OHT owners club!
Post by: Wspeed on January 27, 2020, 04:07:04 PM
Great choice Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on January 27, 2020, 04:13:42 PM
I am really loving this OHT...it has surpassed my Gerber 600 that was carried for many years!  :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on January 27, 2020, 04:15:38 PM
I haven’t had my hands on a Gerber 600 yet :facepalm:
Title: Re: OHT owners club!
Post by: Rapidray on January 27, 2020, 04:22:27 PM
Carried mine for over 10 years, it was bought on my tool account at work. I hated to have to opening it to get to tools. With this one, no problem!  :cheers: :drink:
Title: Re: OHT owners club!
Post by: Wspeed on January 27, 2020, 04:23:11 PM
It is definitely a easy tool to use  :cheers: :drink: :D
Title: Re: OHT owners club!
Post by: LoopCutter on January 27, 2020, 04:25:34 PM
Carried mine for over 10 years, it was bought on my tool account at work. I hated to have to opening it to get to tools. With this one, no problem!  :cheers: :drink:
Cool, I saw that as a major advantage to my Gerber Diesel. (When I had a OHT)
Title: Re: OHT owners club!
Post by: Rapidray on January 27, 2020, 04:38:22 PM
Cool, I saw that as a major advantage to my Gerber Diesel. (When I had a OHT)
A major advantage for sure!  :cheers:
Thanks  :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on January 28, 2020, 02:38:58 PM
The OHT today

Title: Re: OHT owners club!
Post by: Wspeed on January 28, 2020, 05:44:36 PM
Great choice  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on January 28, 2020, 07:16:06 PM
Thanks Ws  :cheers:
Title: Re: OHT owners club!
Post by: Max Stone on January 28, 2020, 07:16:25 PM
Great OHT Rapidray  :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 28, 2020, 07:17:33 PM
Thank you Max  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on January 29, 2020, 02:39:50 PM
Backup duty again

Title: Re: OHT owners club!
Post by: Wspeed on January 29, 2020, 02:57:57 PM
Good choice Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on January 29, 2020, 05:07:00 PM
Thanks Ws  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on January 29, 2020, 08:50:47 PM
Good choice Rapidray  :like: :tu:

 :iagree: :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 29, 2020, 09:36:43 PM
Thanks  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on January 30, 2020, 03:55:20 PM
Just hanging out
Title: Re: OHT owners club!
Post by: Wspeed on January 30, 2020, 04:52:56 PM
Nice one Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on January 30, 2020, 06:03:05 PM
Thanks  :cheers:
Also noticed today that the rivet is missing on the drain hole on the sheath. It has been missing for like 3 days as I picked it up off the floor and was wondering where it came from. Seems there is a right way to put the OHT into the holster and it will miss the rivet and put it in the wrong way it slides right into it!  :facepalm:
Title: Re: OHT owners club!
Post by: Wspeed on January 30, 2020, 06:50:00 PM
 :oops:
Title: Re: OHT owners club!
Post by: Poncho65 on January 30, 2020, 08:03:53 PM
 :iagree: :facepalm:

Great pic though :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 30, 2020, 08:46:04 PM
Thank you sir   :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on January 31, 2020, 03:02:49 PM
Hopefully will see some action today!

Title: Re: OHT owners club!
Post by: Poncho65 on January 31, 2020, 03:14:40 PM
 :iagree: and great pic :like:
Title: Re: OHT owners club!
Post by: Rapidray on January 31, 2020, 03:16:49 PM
Thank you  :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on January 31, 2020, 07:34:21 PM
Nice one Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on January 31, 2020, 09:16:45 PM
Thank you sir  :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on January 31, 2020, 09:18:42 PM
 :cheers: :drink: :D
Title: Re: OHT owners club!
Post by: Rapidray on February 01, 2020, 03:30:31 PM
Today’s
Title: Re: OHT owners club!
Post by: Wspeed on February 01, 2020, 04:45:07 PM
Great carry Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on February 01, 2020, 04:46:18 PM
 :iagree: :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 01, 2020, 07:36:15 PM
Thank you sirs  :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 02, 2020, 03:06:26 PM
Backup duty again

Title: Re: OHT owners club!
Post by: Wspeed on February 02, 2020, 04:07:45 PM
Nice  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 03, 2020, 12:59:05 AM
Thank you sir!  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 03, 2020, 02:23:48 PM
On backup duty

Title: Re: OHT owners club!
Post by: Wspeed on February 03, 2020, 02:24:50 PM
Good one Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 03, 2020, 02:26:47 PM
Thank you sir  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on February 03, 2020, 07:57:41 PM
Great pic, Ray :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 04, 2020, 01:31:18 AM
Thank you sir  :cheers:
Title: Re: OHT owners club!
Post by: SteveC on February 04, 2020, 02:13:35 PM
Nice one Ray !    :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 04, 2020, 03:04:10 PM
Nice one Ray !    :tu:
Thank you sir!  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 04, 2020, 03:05:04 PM
Today doing backup

Title: Re: OHT owners club!
Post by: Wspeed on February 04, 2020, 05:33:06 PM
 :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 05, 2020, 03:21:48 PM
The sun is out again!
Title: Re: OHT owners club!
Post by: Wspeed on February 05, 2020, 04:28:36 PM
Nice one Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 05, 2020, 05:36:37 PM
Thanks Ws  :cheers:
Title: Re: OHT owners club!
Post by: Max Stone on February 05, 2020, 09:59:02 PM
Like a croc basking in the morning light with his mouth gaping - nice pic Rapidray  :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 05, 2020, 10:32:00 PM
Like a croc basking in the morning light with his mouth gaping - nice pic Rapidray  :like:
:rofl: :rofl:
It does! Thanks  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 06, 2020, 02:36:14 PM
I have gotten a brand new MUT OED and this one is still winning on the carry time!

Title: Re: OHT owners club!
Post by: Wspeed on February 06, 2020, 02:37:37 PM
Good one Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 06, 2020, 02:38:46 PM
Thank you Ws  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on February 07, 2020, 03:57:44 AM
Good one Rapidray  :like: :tu:

 :iagree: but you need to show the MUT some love as well :pok: :D

:nanadance:          :nanadance:
Title: Re: OHT owners club!
Post by: Rapidray on February 07, 2020, 04:13:56 AM
:iagree: but you need to show the MUT some love as well :pok: :D

:nanadance:          :nanadance:
Okay  :facepalm:
I guess it will be ok as it is being used as a backup to the Fieldmaster challenge. Matter of fact it was used in the Ranger Challenge also as backup...I’m not doing any challenges in March so I think I will do a OHT  Challenge by myself.  :woohoo:
Title: Re: OHT owners club!
Post by: Poncho65 on February 07, 2020, 04:57:45 AM
Can't wait til March for you then :tu: :like:

 :popcorn:
Title: Re: OHT owners club!
Post by: Rapidray on February 08, 2020, 02:37:47 PM
Yeay

Title: Re: OHT owners club!
Post by: Poncho65 on February 08, 2020, 04:14:54 PM
:dd: :like:
Title: Re: OHT owners club!
Post by: Wspeed on February 08, 2020, 04:58:45 PM
 :iagree: :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 08, 2020, 06:44:45 PM
:dd: :like:
Thanks Poncho  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 08, 2020, 06:45:10 PM
:iagree: :like: :tu:
Thanks Ws  :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on February 08, 2020, 07:17:03 PM
 :2tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 09, 2020, 01:39:59 PM
Today’s
Title: Re: OHT owners club!
Post by: Wspeed on February 09, 2020, 01:52:45 PM
Looking good Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: SteveC on February 09, 2020, 02:05:47 PM
Happy that you are liking the OHT so much  !   :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 10, 2020, 04:10:47 AM
Looking good Rapidray  :like: :tu:
Thanks Ws  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 10, 2020, 04:12:48 AM
Happy that you are liking the OHT so much  !   :cheers:
Oh most definitely, I have always preferred the sliding feature and with the tools on the outside, made me like it more.  :woohoo:
Thanks LoopCutter  :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on February 11, 2020, 02:33:13 PM
Today
Title: Re: OHT owners club!
Post by: Wspeed on February 11, 2020, 02:33:55 PM
Nice one Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 11, 2020, 06:36:08 PM
Thank you sir!  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on February 12, 2020, 01:36:55 PM
Nice one Rapidray  :like: :tu:

 :iagree: :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 12, 2020, 02:41:19 PM
:iagree: :like:
Thank you sir!  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on February 12, 2020, 04:06:57 PM
 :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on February 12, 2020, 05:55:25 PM
Thank you sir  :hatsoff:
Title: Re: OHT owners club!
Post by: LoopCutter on February 13, 2020, 02:01:07 PM
Oh most definitely, I have always preferred the sliding feature and with the tools on the outside, made me like it more.  :woohoo:
Thanks LoopCutter  :hatsoff:
Your are very welcome!
Title: Re: OHT owners club!
Post by: Rapidray on February 13, 2020, 03:22:44 PM
Today’s carry of course, so no surprise there!  :rofl:

Title: Re: OHT owners club!
Post by: Poncho65 on February 13, 2020, 04:04:35 PM
Even if it isn't a surprise, it is a great carry, Ray :cheers: :like:

 :D
Title: Re: OHT owners club!
Post by: LoopCutter on February 13, 2020, 05:08:03 PM
Today’s carry of course, so no surprise there!  :rofl:
It definitely appears to enjoy the Florida climate, even if you do not use to slice APPLES!
Title: Re: OHT owners club!
Post by: Wspeed on February 13, 2020, 05:20:00 PM
Great carry Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 13, 2020, 06:54:42 PM
Even if it isn't a surprise, it is a great carry, Ray :cheers: :like:

 :D
Most definitely- thanks  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 13, 2020, 06:58:23 PM
It definitely appears to enjoy the Florida climate, even if you do not use to slice APPLES!
:rofl: :rofl: :rofl:
You know how the challenges go....have to use that tool. And yes it’s killing me not using the OHT. Which is why I will be doing my OHT challenge the month of March right after the Fieldmaster is over with. So a lot of apples will be getting cut and other duties as I will be back to work and on the roof tops cleaning coils!  :woohoo:
Title: Re: OHT owners club!
Post by: Rapidray on February 13, 2020, 06:58:47 PM
Great carry Rapidray  :like: :tu:
Thanks Ws  :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on February 13, 2020, 07:21:14 PM
 :cheers: :drink: :D
Title: Re: OHT owners club!
Post by: LoopCutter on February 14, 2020, 01:07:38 AM
~So a lot of apples will be getting cut and other duties as I will be back to work and on the roof tops cleaning coils!
Did I read previous reply you posted, that you will be working north and leaving Mrs Ray in Florida during the coil cleaning?
Title: Re: OHT owners club!
Post by: Rapidray on February 14, 2020, 01:12:06 AM
Did I read previous reply you posted, that you will be working north and leaving Mrs Ray in Florida during the coil cleaning?
Oh there is no Mrs.
Can not find one with my love of the outdoors, hiking/camping and biking!  :dunno:
Title: Re: OHT owners club!
Post by: Wspeed on February 14, 2020, 02:21:36 PM
There has got to be someone out there for you Rapidray  :think:
Title: Re: OHT owners club!
Post by: Rapidray on February 14, 2020, 03:30:03 PM
We’ll see  :cheers: :drink:
Title: Re: OHT owners club!
Post by: Rapidray on February 14, 2020, 03:30:46 PM
Oh, almost forgot!
Title: Re: OHT owners club!
Post by: Wspeed on February 14, 2020, 04:47:29 PM
Good one Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 14, 2020, 05:44:01 PM
Thanks sir  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 15, 2020, 03:27:30 PM
Today’s backup

Title: Re: OHT owners club!
Post by: Wspeed on February 15, 2020, 10:46:34 PM
Nice one Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 16, 2020, 12:29:24 AM
Thank you sir!  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 16, 2020, 02:47:23 PM
Today’s

Title: Re: OHT owners club!
Post by: Wspeed on February 16, 2020, 03:31:47 PM
Nice  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 16, 2020, 04:36:20 PM
Thanks  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on February 16, 2020, 11:13:41 PM
Great pics,  Ray  :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 17, 2020, 01:00:35 AM
Thanks Poncho  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 17, 2020, 02:55:21 PM
A neat tool that never gets seen.

Title: Re: OHT owners club!
Post by: marko14 on February 17, 2020, 06:18:27 PM


Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Rapidray on February 17, 2020, 07:53:46 PM
Some great photos of your OHT!  :like: :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on February 17, 2020, 08:08:06 PM
Great carries Rapidray and marko  :like: :tu:
Title: Re: OHT owners club!
Post by: marko14 on February 17, 2020, 09:17:23 PM
Some great photos of your OHT!  :like: :cheers:
Great carries Rapidray and marko  :like: :tu:
Thank you fellas

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Rapidray on February 17, 2020, 10:29:06 PM
Thank you guys  :cheers:
Title: Re: OHT owners club!
Post by: Doc on February 18, 2020, 02:16:55 PM
I am generally one to stress objectivity, and this ought to apply particularly when it comes to hardware, e.g. does it work, is it sturdy, etc..  However, and maybe someone has said this earlier in the thread (it is getting lengthy and I didn’t read it all), I’m going to go completely subjective about the OHT.  I’m going to get one because the black one is absolutely the most badass looking MT on the market.  I’m just sayin’...
Title: Re: OHT owners club!
Post by: Rapidray on February 18, 2020, 02:32:08 PM
No argument from me on that one Doc!  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 18, 2020, 02:32:48 PM
Pulling backup duty again
Title: Re: OHT owners club!
Post by: Wspeed on February 18, 2020, 03:49:05 PM
 :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 18, 2020, 05:17:40 PM
Thanks Ws  :cheers:
Title: Re: OHT owners club!
Post by: marko14 on February 18, 2020, 05:47:17 PM
Pulling backup duty again
Is this your favourite tool now?

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Rapidray on February 18, 2020, 06:26:57 PM
Is this your favourite tool now?

Sent from my SM-G960F using Tapatalk
Yes it is! It is perfect. Pliers slide out with a flick of the wrist and tool access is from the outside, not in between the handles. Will be doing my OHT 30 day Challenge starting March 2nd -31st.  :2tu:
Title: Re: OHT owners club!
Post by: LoopCutter on February 18, 2020, 06:55:43 PM
~I’m going to get one because the black one is absolutely the most badass looking MT on the market.  I’m just sayin’...
Really?   That is the only reason?


A good one though! :multi:
Title: Re: OHT owners club!
Post by: LoopCutter on February 18, 2020, 06:57:43 PM
Yes it is! It is perfect. Pliers slide out with a flick of the wrist and tool access is from the outside, not in between the handles. Will be doing my OHT 30 day Challenge starting March 2nd -31st.  :2tu:
Can not wait!!! :tu: :cheers:
Title: Re: OHT owners club!
Post by: marko14 on February 18, 2020, 07:03:28 PM
Yes it is! It is perfect. Pliers slide out with a flick of the wrist and tool access is from the outside, not in between the handles. Will be doing my OHT 30 day Challenge starting March 2nd -31st.  :2tu:
Niceeeeee

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Rapidray on February 18, 2020, 08:13:40 PM
Can not wait!!! :tu: :cheers:
So looking forward to it because I will be back to work in Atlanta the 3rd of March. It will be getting used daily! Thank you!  :hatsoff:
Title: Re: OHT owners club!
Post by: Poncho65 on February 19, 2020, 03:14:37 AM
Great pics Ray and marko :like: :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 19, 2020, 04:24:29 AM
Great pics Ray and marko :like: :like:
Thanks Poncho  :cheers:
Title: Re: OHT owners club!
Post by: Doc on February 19, 2020, 05:28:36 AM
Really?   That is the only reason?


A good one though! :multi:

Actually, yeah, pretty much.  I mean, it’s not like anyone around here really needs another MT because they don’t already have one, or twenty.
Title: Re: OHT owners club!
Post by: marko14 on February 19, 2020, 09:10:02 AM
Great pics Ray and marko :like: :like:
Thank you

Sent from my E6653 using Tapatalk

Title: Re: OHT owners club!
Post by: Rapidray on February 19, 2020, 03:21:07 PM
Today’s photo
Title: Re: OHT owners club!
Post by: Wspeed on February 19, 2020, 04:21:37 PM
Looking good  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 19, 2020, 05:22:53 PM
It is!  :rofl:  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on February 19, 2020, 07:48:58 PM
Looking good  :like: :tu:

 :iagree: :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 20, 2020, 03:18:37 PM
Backup duty again!
Title: Re: OHT owners club!
Post by: Wspeed on February 20, 2020, 05:41:18 PM
Doing a good job  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 20, 2020, 09:51:12 PM
The Fieldmaster has not failed me once...so my backups just come along for the ride!  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on February 21, 2020, 12:33:01 AM
Still a great looking backup :tu: :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 21, 2020, 12:57:34 AM
Oh most definitely  :cheers: :drink:
Title: Re: OHT owners club!
Post by: Rapidray on February 21, 2020, 02:29:22 PM
Today’s

Title: Re: OHT owners club!
Post by: Wspeed on February 21, 2020, 02:31:53 PM
Nice pics Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: marko14 on February 21, 2020, 02:36:51 PM
Cool photos Rr

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Rapidray on February 21, 2020, 02:37:48 PM
Thanks guys  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on February 21, 2020, 08:22:16 PM
Cool photos Rr

Sent from my SM-G960F using Tapatalk

 :iagree: :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 22, 2020, 01:36:22 AM
Thank you sir  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 22, 2020, 02:45:25 PM
Backup duty
Title: Re: OHT owners club!
Post by: Wspeed on February 22, 2020, 04:51:57 PM
Nice  :salute: :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 22, 2020, 06:08:16 PM
Thanks   :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on February 23, 2020, 03:09:09 PM
Love the all black OHT  :salute: :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 23, 2020, 06:10:41 PM
Love the all black OHT  :salute: :like:
Thank you sir  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 23, 2020, 06:13:08 PM
Today’s backup
Title: Re: OHT owners club!
Post by: Poncho65 on February 24, 2020, 12:40:24 PM
 :like: :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 24, 2020, 03:21:10 PM
Backup today...
Title: Re: OHT owners club!
Post by: Poncho65 on February 24, 2020, 04:55:02 PM
Great pic, Ray :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 24, 2020, 05:07:07 PM
Thank you sir!  :cheers:
Title: Re: OHT owners club!
Post by: Poncho65 on February 24, 2020, 05:54:20 PM
 :hatsoff:
Title: Re: OHT owners club!
Post by: Wspeed on February 25, 2020, 02:05:39 PM
Nice pics Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 25, 2020, 02:06:25 PM
Thanks Ws  :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on February 25, 2020, 02:06:52 PM
 :hatsoff:
Title: Re: OHT owners club!
Post by: Rapidray on February 25, 2020, 02:37:41 PM
The OHT on backup
Title: Re: OHT owners club!
Post by: marko14 on February 25, 2020, 02:53:59 PM


Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Poncho65 on February 25, 2020, 03:09:03 PM
Great pics Ray and Marko :like:
Title: Re: OHT owners club!
Post by: marko14 on February 25, 2020, 03:28:14 PM
Great pics Ray and Marko :like:
Thank you

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on February 25, 2020, 05:30:49 PM
Nice pics Rapidray and marko  :like: :tu:
Title: Re: OHT owners club!
Post by: Wspeed on February 25, 2020, 05:31:44 PM
Carrying my OHT today

(https://i.imgur.com/1uJfIx5.jpg)
Title: Re: OHT owners club!
Post by: Rapidray on February 25, 2020, 07:35:45 PM


Sent from my SM-G960F using Tapatalk
Nice OHT Marko  :like: :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 25, 2020, 07:36:11 PM
Great pics Ray and Marko :like:
Thanks Poncho  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 25, 2020, 07:37:20 PM
Carrying my OHT today

(https://i.imgur.com/1uJfIx5.jpg)
Great looking OHT Ws!  :cheers:
Thats two new OHT’s today!  :woohoo:
Title: Re: OHT owners club!
Post by: Syncop8r on February 25, 2020, 07:44:54 PM

We need to know more about those axes marko.  :pok:
Title: Re: OHT owners club!
Post by: Wspeed on February 25, 2020, 07:59:09 PM
Thanks Rapidray  :cheers: :tu:
Title: Re: OHT owners club!
Post by: marko14 on February 25, 2020, 09:21:39 PM
Nice pics Rapidray and marko  :like: :tu:
thank you
Carrying my OHT today
silver Surfer ,big like
(https://i.imgur.com/1uJfIx5.jpg)
Nice OHT Marko  :like: :cheers:
thank you
We need to know more about those axes marko.  :pok:
I have both axes for years, as you can see,by the bruises they got repared several times today i chopped some wood while other try to eat the same

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Wspeed on February 25, 2020, 09:56:28 PM
Thanks marko  :cheers:
Nice pic of your dog :like: :tu:
Title: Re: OHT owners club!
Post by: marko14 on February 25, 2020, 10:02:16 PM
Thanks marko  :cheers:
Nice pic of your dog :like: :tu:


Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Rapidray on February 25, 2020, 10:27:28 PM
I have both axes for years, as you can see,by the bruises they got repared several times today i chopped some wood while other try to eat the same

Sent from my SM-G960F using Tapatalk
Well, he can eat anything he wants to, I’m not going to be telling him different!  :rofl: :cheers:
Title: Re: OHT owners club!
Post by: marko14 on February 25, 2020, 10:33:31 PM
Well, he can eat anything he wants to, I’m not going to be telling him different!  :rofl: :cheers:
Hahahahahah

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Poncho65 on February 26, 2020, 12:40:13 PM
Great pic, Ws :like: and great looking dog, marko :like:
Title: Re: OHT owners club!
Post by: marko14 on February 26, 2020, 01:29:42 PM
Great pic, Ws :like: and great looking dog, marko :like:
Cheers

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: SteveC on February 26, 2020, 01:55:45 PM
 :like:
Title: Re: OHT owners club!
Post by: Wspeed on February 26, 2020, 02:18:53 PM
Thanks Poncho and Steve  :cheers: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 26, 2020, 02:49:44 PM
This one of course!
Title: Re: OHT owners club!
Post by: Wspeed on February 26, 2020, 06:28:55 PM
Nice one Rapidray  :like: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on February 26, 2020, 07:45:02 PM
Thanks Ws  :cheers:
Title: Re: OHT owners club!
Post by: Wspeed on February 26, 2020, 08:36:17 PM
 :cheers: :drink: :D
Title: Re: OHT owners club!
Post by: Poncho65 on February 27, 2020, 04:17:42 AM
Great pic, Ray :like:
Title: Re: OHT owners club!
Post by: Rapidray on February 27, 2020, 06:26:37 AM
Thanks Poncho  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on February 27, 2020, 03:04:30 PM
My OHT today

Title: Re: OHT owners club!
Post by: Rapidray on February 28, 2020, 08:29:53 AM
Off to Georgia
Title: Re: OHT owners club!
Post by: Wspeed on February 28, 2020, 01:55:05 PM
You going on a trip Rapidray  :tu:
Title: Re: OHT owners club!
Post by: LoopCutter on February 28, 2020, 05:38:20 PM
He had indicated he was planning return to work temporarily in Atlanta.  Cleaning air conditioning coils and PM work for previous employer.  Does this for a few months to boost income but stay below Social Security tax caps. 


Or, he just doing it because he enjoys it!
Title: Re: OHT owners club!
Post by: Poncho65 on February 29, 2020, 11:46:54 PM
Be safe Ray :salute:
Title: Re: OHT owners club!
Post by: Rapidray on March 03, 2020, 12:07:30 AM
He had indicated he was planning return to work temporarily in Atlanta.  Cleaning air conditioning coils and PM work for previous employer.  Does this for a few months to boost income but stay below Social Security tax caps. 


Or, he just doing it because he enjoys it!
That would be both reasons  :rofl:
I actually like cleaning the A/C coils and I do need some toy money and van build  :cheers: :tu:
Title: Re: OHT owners club!
Post by: Rapidray on March 03, 2020, 12:08:30 AM
Be safe Ray :salute:
Thanks Poncho! Will be around but not like I usually am  :cheers:
Title: Re: OHT owners club!
Post by: Rapidray on March 03, 2020, 12:17:47 AM
Today’s photo
Title: Re: OHT owners club!
Post by: Wspeed on March 03, 2020, 12:18:48 AM
Nice  :drool: :like:
Title: Re: OHT owners club!
Post by: LoopCutter on March 03, 2020, 01:06:01 AM
Today’s photo
Settled in?
You bring the apple(s) with you?


Be safe working in that big city and no falling of any roofs. 



Title: Re: OHT owners club!
Post by: Poncho65 on March 04, 2020, 12:23:57 PM
Settled in?
You bring the apple(s) with you?


Be safe working in that big city and no falling of any roofs.


 :iagree: and great pic, Ray :like:
Title: Re: OHT owners club!
Post by: Rapidray on March 05, 2020, 12:53:38 AM
Settled in?
You bring the apple(s) with you?


Be safe working in that big city and no falling of any roofs.
:rofl: :rofl: :rofl:
Yes I did bring the apples up with me. Settled in and sleeping good! The only thing I have to look out for is...the traffic, some of these drivers... :facepalm:
Title: Re: OHT owners club!
Post by: Poncho65 on March 05, 2020, 06:01:15 PM
Atlanta is horrible every time I go through :ahhh
Title: Re: OHT owners club!
Post by: Wspeed on April 07, 2020, 06:35:11 PM
(https://i.imgur.com/9I79ZKj.jpg)
Title: Re: OHT owners club!
Post by: Poncho65 on April 08, 2020, 12:49:18 PM
Excellent pic, Ws :dd: :like:
Title: Re: OHT owners club!
Post by: Syncop8r on April 08, 2020, 12:51:06 PM
Yes, vivid.  :like:
Title: Re: OHT owners club!
Post by: Wspeed on April 08, 2020, 01:45:37 PM
Thanks Poncho and Syncop8r  :cheers: :tu:
Title: Re: OHT owners club!
Post by: LoopCutter on April 10, 2020, 10:29:30 PM
Great picture WS of your OHT.  I for some reason thought you no longer  had it available to you.

The SS does look sharp. 
Title: Re: OHT owners club!
Post by: Wspeed on April 10, 2020, 11:19:38 PM
Thanks LC :cheers:
I haven’t used it for a while
But now I am trying to use it more often :tu:
Title: Re: OHT owners club!
Post by: Syncop8r on April 11, 2020, 12:23:16 AM
Yay! I finally found my OHT last night after it was missing for a few months.
I don't know what it has been up to, but now the pliers often get stuck and won't slide out.  :dunno:
Title: Re: OHT owners club!
Post by: Wspeed on April 11, 2020, 02:29:08 PM
Glad you found it Syncop8r  :like:
Maybe give it a bit of oil on the slide rails  :think:
Title: Re: OHT owners club!
Post by: Syncop8r on April 11, 2020, 10:32:29 PM
I found the problem - the lock was loose and I was able to unscrew it right off. I screwed it back in and now it's fine.
Title: Re: OHT owners club!
Post by: Wspeed on April 11, 2020, 10:55:45 PM
Nice and easy fix  :like: :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on April 12, 2020, 04:52:23 PM
Glad you found it and fixed it, synco :tu: :like:
Title: Re: OHT owners club!
Post by: Syncop8r on April 12, 2020, 10:27:42 PM
Is it normal to be able to unscrew the lock right out?  :think:
Title: Re: OHT owners club!
Post by: Poncho65 on April 13, 2020, 01:23:01 AM
:shrug:
Title: Re: OHT owners club!
Post by: Wspeed on April 13, 2020, 02:19:23 PM
I don’t think so  :dunno:
Title: Re: OHT owners club!
Post by: LoopCutter on April 14, 2020, 12:56:58 AM
 :multi:  I have returned to the ranks of a OHT owner.  A like new one arrived today.
A little oil and a wipe down has the pliers deploying with the slightest flick. 
Title: Re: OHT owners club!
Post by: Poncho65 on April 14, 2020, 12:27:08 PM
Congrats LC and welcome back to the club :salute: :like:
Title: Re: OHT owners club!
Post by: Wspeed on April 14, 2020, 02:06:30 PM
Welcome back LC :cheers:
Title: Re: OHT owners club!
Post by: LoopCutter on April 15, 2020, 05:57:11 PM
Thank you for the welcome back. 

I missed the spring loaded pliers, due to my arthritis in my hands. Then realized the OH function of the tools provided great functionality for my simple needs.

Then of course RapidRays great pictures of HIS OHT just sold me on needing one again.
Title: Re: OHT owners club!
Post by: Wspeed on April 15, 2020, 06:00:35 PM
It’s a great tool just wish that they
would make a updated version  :tu:
Title: Re: OHT owners club!
Post by: Syncop8r on April 16, 2020, 11:42:13 AM
It’s a great tool just wish that they
would make a updated version  :tu:
What did you think needs updating on it?
Title: Re: OHT owners club!
Post by: Wspeed on April 16, 2020, 02:05:22 PM
I would like to see scissors and the bit holder on the OHT
And newly designed handles  :dd:
I feel the same about the Crunch :tu:
Title: Re: OHT owners club!
Post by: LoopCutter on April 16, 2020, 03:56:46 PM
I would like to see scissors and the bit holder on the OHT
And newly designed handles  :dd:
I feel the same about the Crunch :tu:


Leatherman could do two things and improve the OHT.


First, lower the price.  $90 is a tad high, $75 would be more practical IMHO!


Second, offer variants of the OHT. Would require revised handle relieves(?)


I would like a file (diamond), and replace the Serrated blade. Even install a Combo blade instead of the PE.


Scissors are a issue. Does not seem any mfg has installed a well performing scissor in a MT.  Likely why the deep-v cutter is present as it fits the shorter slot nicely.


Just a couple thoughts...
Title: Re: OHT owners club!
Post by: Wspeed on April 16, 2020, 04:29:38 PM
Yes  :iagree: scissors That work are some
what of a rare thing on a multi tool
But there is no excuse for fitting scissors that don’t
work properly and thinking that we will get away with it
They should be ashamed of putting tools on a multitool
That don’t do what they are supposed to do

I don’t know why they can’t get scissors
that work properly or a tin opener  :dunno:

It’s like the most important thing to them is the pliers
Which I think isn’t the right attitude to have
Especially when you are calling it a multi tool
And for the price they want for them
I can buy a excellent quality set of pliers
But they are selling it as a multi tool
Than as a company at least make sure all
of the tools you put on them work properly  :tu:
Title: Re: OHT owners club!
Post by: Syncop8r on April 17, 2020, 09:40:22 AM
I would like to see scissors and the bit holder on the OHT
I don't see those things as "updating" it any - just another option with a different toolset.
(I "updated" my Surge by taking the bit driver out and replacing it with screwdrivers  ;) )

The OHT was targeted at a specific user - the military. But variations would be nice, although they are constrained by the design.
Title: Re: OHT owners club!
Post by: Wspeed on April 17, 2020, 02:12:46 PM
You have a point  :tu:
I just think the OHT could be a
better tool than it is right now  :think:
Title: Re: OHT owners club!
Post by: LoopCutter on April 17, 2020, 04:11:23 PM
~
The OHT was targeted at a specific user - the military. But variations would be nice, although they are constrained by the design.
I think that every tool made has the hope to be adopted for use by soldiers and to purchased for military contracts.


The OHT I believe was designed and introduced to be a one handed tool that was to compete and beat the Gerber line of tools.
Title: Re: OHT owners club!
Post by: Wspeed on April 17, 2020, 04:14:17 PM
I haven’t had a chance to use a Gerber MT yet  :facepalm:
Title: Re: OHT owners club!
Post by: LoopCutter on April 17, 2020, 05:31:27 PM
I haven’t had a chance to use a Gerber MT yet  :facepalm:
I have the MP400 and a Diesel. Both are good tools with good pliers and a wide choice of implements. The downside to me is that I must deploy the pliers to select a knife or any implement. Then retract the pliers to then utilize the implement, then do it all again to put it back away. 


To me, the OHT is perfect as an improved sliding plier tool because AWL implements can deployed with or without the pliers deployed.  And can be done with the hand holding the tool! And, also can be put away as well. 


I came appreciate the OHT during the challenge last November.  It threaten my respect for my Rebars and SuperTool, so I gifted my OHT to another that had consistently expressed interest and appreciation of the OHT. 


But, 90 days without the OHT, I just knew I did benefit from its function and also its beastly beauty.
Title: Re: OHT owners club!
Post by: Wspeed on April 17, 2020, 05:51:36 PM
That seems a lot of work just to be able to use a tool
It is definitely easier to use the OHT
Makes me think differently about the OHT now :tu:
Title: Re: OHT owners club!
Post by: Syncop8r on April 18, 2020, 01:13:41 PM
I like it. And I too prefer not having to slide out the pliers to get at the tools like with Gerbers.  :bnghd:

Sure, it would be nice if some of the tools could be longer (well, the saw anyway) but we are constrained by the 'architecture' of the OHT. But I'm still interested to see OHTs with other tools in them.  :cheers:
Show content
Although my OCD side would struggle with the picture on the handle not matching the tool adcaent to it.  :facepalm:
Title: Re: OHT owners club!
Post by: Wspeed on April 18, 2020, 02:34:06 PM
Yes that would be hard to change  :rofl:
Title: Re: OHT owners club!
Post by: Wspeed on June 28, 2020, 09:46:35 PM
(https://i.imgur.com/heK6Y5t.jpg)
Title: Re: OHT owners club!
Post by: Wspeed on July 06, 2020, 02:16:11 PM
(https://i.imgur.com/vc0aTjG.jpg)
Title: Re: OHT owners club!
Post by: Poncho65 on July 06, 2020, 03:15:40 PM
Great pic, Ws :like:
Title: Re: OHT owners club!
Post by: Wspeed on July 06, 2020, 04:07:42 PM
Thanks Poncho  :cheers: :tu:
Title: Re: OHT owners club!
Post by: marko14 on December 09, 2020, 12:16:25 PM
Lone Star Law  season 8 episode 1

Sent from my SM-G960F using Tapatalk
Title: Re: OHT owners club!
Post by: marko14 on December 12, 2020, 03:00:22 PM


Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: Poncho65 on December 12, 2020, 06:35:20 PM
Great pics,  marko :like:
Title: Re: OHT owners club!
Post by: marko14 on December 12, 2020, 09:07:14 PM
Great pics,  marko :like:
Cheers

Sent from my SM-G960F using Tapatalk

Title: Re: OHT owners club!
Post by: King_Gorilla on January 26, 2021, 02:00:25 AM
I don't have a OHT.  But I was just on the Leatherman website and I was looking at their pictures of the OHT.  It looks like the can opener tool is shaped slightly different from the standard leatherman lobster claw shape.  Could anyone with an OHT and a wave, charge, signal, surge, etc. post a close up side by side picture for comparison purposes??? 
Also, does anyone know what the reason was for the change and how the OHT can opener performs compared to the normal leatherman opener?
Title: Re: OHT owners club!
Post by: pietervn on January 26, 2021, 05:25:42 AM
G'Day King_G,

I include a few pics with a Signal, PST II and a Charge Ti. The shape is closer to the PST than the newer tools' opener. No wire stripper included, hence a shorter opener.

The change is most likely due to the chassis size. With the tools on the outside, space is a premium.

Cheers, Pete
Title: Re: OHT owners club!
Post by: Poncho65 on January 26, 2021, 11:59:32 AM
Great comparison pics, pieter :salute: :like:
Title: Re: OHT owners club!
Post by: pietervn on January 27, 2021, 08:29:12 AM
Cheers Poncho,

I had a look at the OHT and where the bottle opener is located. There is no way the new version will fit. There is a few mm between the saw and the opener, thus I suspect that size has to do with it. Most of the tools on the plier side is slightly smaller to accommodate the larger ones on the handle side. It is still a very usable tool. I carry mine on a regular basis.

I pair it with a Micra or SD in a combination pouch made by one of our inmates.

Cheers, Pete
Title: Re: OHT owners club!
Post by: Poncho65 on January 27, 2021, 12:25:54 PM
I rarely if ever carry mine :facepalm: but that is a beautiful sheath :drool: :like:
Title: Re: OHT owners club!
Post by: King_Gorilla on January 29, 2021, 07:15:14 AM
Thanks for the pictures Pietervn.  That is a great looking sheath!  did you make it?


I am not sure why, the OHT can opener on the leatherman website looks a little different.  Maybe I am just going crazy.   :dunno:
Title: Re: OHT owners club!
Post by: Poncho65 on January 29, 2021, 01:07:38 PM
Maybe an earlier design of the opener for the OHT on their site :think: I believe mine looks just like pieters as well :salute:
Title: Re: OHT owners club!
Post by: pietervn on January 29, 2021, 09:11:06 PM
There were some subtle changes after the tool was released. Have a look at the saw tip, slightly different to one one I have. Incidentally the saw and opener are on the same side.

The sheath was made by another member here Gohard. A fellow on Oz that makes fantastic leather stuff. I have a custom sheath for all my daily tools I rotate.

Pete 
Title: Re: OHT owners club!
Post by: rdub934 on May 29, 2021, 02:37:37 AM
I finally joined this club! Been drooling over the OHTs since they dropped (13, 14  :think: ) I had a coupon code at the LM store and sat here sweating finally getting an OHT, getting a Crunch, or pulling the trigger on a new Bond. Decided to go OHT in coyote. The OHT is right in my wheelhouse having everything readily available. The thing I like about the CenterDrive are the main tools being one-hand-able. Looking forward to getting some use out of this one to see how it compares.

Hate the sheath, though. Its the coyote version of the black one I got with my SuperTool300. Without it being MOLLE'd onto to my plate carrier, I just can't see using this sheath. I carry my CD horizontal, and I really dig it that way
Title: Re: OHT owners club!
Post by: Poncho65 on May 29, 2021, 10:40:26 PM
Congrats rdub :woohoo: Hope you get on well with it :tu: :like:
Title: Re: OHT owners club!
Post by: SurgeUk on May 30, 2021, 12:14:52 AM
Congrats rdub :woohoo: Hope you get on well with it :tu: :like:
:iagree: & welcome  :tu:

I'm still trying to "Bond" with mine  :whistle: I've had it for years and just can't get on with it  :dunno: ::)
Title: Re: OHT owners club!
Post by: Syncop8r on May 30, 2021, 12:22:42 AM
At the very least it's something to play with if left on the coffee table.

I need to find mine, I haven't seen it in months. :shrug:
Title: Re: OHT owners club!
Post by: Syncop8r on May 30, 2021, 12:23:48 AM
I finally joined this club!
Yay!
Show content
:worthless:
Title: Re: OHT owners club!
Post by: Poncho65 on July 30, 2021, 11:22:34 PM
 8)

(https://i.imgur.com/x6lotoch.jpg)

(https://i.imgur.com/ioTLHovh.jpg)

(https://i.imgur.com/FOFLgbvh.jpg)
Title: Re: OHT owners club!
Post by: Syncop8r on July 31, 2021, 12:25:44 AM
 :like:  That one is looking good.  :drool:
Title: Re: OHT owners club!
Post by: Poncho65 on July 31, 2021, 01:22:19 AM
Thanks Synco :hatsoff:
Title: Re: OHT owners club!
Post by: dks on September 28, 2021, 08:52:55 AM
Got another one, to use, in theory
Title: Re: OHT owners club!
Post by: Poncho65 on September 28, 2021, 11:45:30 AM
I love the colors of the coyote tan ones 8) I still don't get along to well with the OHT but it is still a pretty good tool overall, just not my cup of tea :salute: :tu:

Congrats, dks :like:
Title: Re: OHT owners club!
Post by: SteveC on September 28, 2021, 01:28:43 PM
Congrats !    :tu:
Title: Re: OHT owners club!
Post by: dks on September 28, 2021, 02:07:03 PM
I am surprised by how well the metal sheath works, you pull it out and the pliers pop out automatically , put it back in and they retract (not fully)
Title: Re: OHT owners club!
Post by: marko14 on October 01, 2021, 02:37:29 PM
Got another one, to use, in theory
Congrats

Sent from my SM-G998B using Tapatalk

Title: Re: OHT owners club!
Post by: Barry Rowland on January 13, 2022, 12:25:29 AM
I'm in, thanks to the generosity of Zoidberg! 
Title: Re: OHT owners club!
Post by: Syncop8r on January 13, 2022, 12:33:01 AM
 :like:
Title: Re: OHT owners club!
Post by: Poncho65 on January 13, 2022, 01:00:07 AM
Congrats Barry :woohoo: :like: :like:

Good on you,  zoid :salute: :like: :like:
Title: Re: OHT owners club!
Post by: Barry Rowland on January 13, 2022, 01:17:12 AM
 :cheers: guys!  Time to have some fun!
Title: Re: OHT owners club!
Post by: zoidberg on January 13, 2022, 11:36:15 AM
Happy to hear it has arrived safely.
There are plenty of MTs around that I wouldn't recommend... and I did have my doubts about this one.
But after a thirty day challenge and a few years of thumping on it I found it works pretty good.
Title: Re: OHT owners club!
Post by: Barry Rowland on January 13, 2022, 04:15:02 PM
My son agrees with you Zoid.  He's had his for years and decided one day to use it at work.  He works on marine engines.  He loves it now, and thinks pretty highly of his. 
Title: Re: OHT owners club!
Post by: Barry Rowland on January 19, 2022, 03:22:34 PM
Playing inside today
Title: Re: OHT owners club!
Post by: Poncho65 on January 19, 2022, 05:19:37 PM
Great pic , Barry  :salute: :like:
Title: Re: OHT owners club!
Post by: Barry Rowland on January 19, 2022, 06:23:25 PM
Thanks Poncho! :cheers:
Title: Re: OHT owners club!
Post by: Barry Rowland on January 20, 2022, 07:26:23 PM
OHT vets, what's a good sheath for this tool?  I'm surprised at how big a mt it is.
Title: Re: OHT owners club!
Post by: Poncho65 on January 20, 2022, 07:50:50 PM
It being in the same size category as a Surge or ST300, I just use my normal nylon camo LM sheath that I carry every day :shrug: I fit both Wave/PST and ST300/Surge/OHT sized tools in it :salute: It took me a while to find a sheath that would last and still fit both sized tools :cheers:

I bought a few of them but I am actually still on the first one :o :like:

Title: Re: OHT owners club!
Post by: Barry Rowland on January 20, 2022, 09:55:51 PM
That works for me Poncho.  Thanks! :cheers:
Title: Re: OHT owners club!
Post by: pietervn on January 21, 2022, 06:16:20 AM
Custom Leather combination sheath. It will take an OHT and a Micra or Vic SD on the side.

Pete
Title: Re: OHT owners club!
Post by: Poncho65 on January 21, 2022, 11:49:58 AM
That is one sweet sheath :o :drool: :like:
Title: Re: OHT owners club!
Post by: SurgeUk on January 21, 2022, 03:53:37 PM
That is one sweet sheath :o :drool: :like:

 :iagree: :like: +1  :tu:
Title: Re: OHT owners club!
Post by: Barry Rowland on January 21, 2022, 04:46:41 PM
I LOVE it!!!  That's a beautiful sheath, and pretty much covers all the bases too.  :ahhh
Title: Re: OHT owners club!
Post by: Poncho65 on February 13, 2022, 07:57:22 PM
 :hatsoff:

(https://i.imgur.com/1t4prSjh.jpg)

:nanadance:             :nanadance:
Title: Re: OHT owners club!
Post by: Barry Rowland on February 13, 2022, 10:10:53 PM
 :ahhh :ahhh :ahhh
Title: Re: OHT owners club!
Post by: Poncho65 on February 14, 2022, 01:37:12 AM
Great pic,  Barry :like:
Title: Re: OHT owners club!
Post by: Barry Rowland on February 14, 2022, 04:10:39 AM
 :hatsoff: Thanks Poncho!
Title: Re: OHT owners club!
Post by: Spartan19 on March 30, 2022, 07:42:32 PM
Keeping busy with the oht :cheers:
Title: Re: OHT owners club!
Post by: Barry Rowland on March 30, 2022, 08:09:48 PM
 :like: Great pic buddy!!
Title: Re: OHT owners club!
Post by: Poncho65 on March 30, 2022, 08:30:25 PM
 :iagree: :like: :like:
Title: Re: OHT owners club!
Post by: Farmer X on March 31, 2022, 06:06:14 AM
Keeping busy with the oht.
:like: Is that a 110 or a 112 with it?
Title: Re: OHT owners club!
Post by: Barry Rowland on March 31, 2022, 06:28:56 AM
:like: Is that a 110 or a 112 with it?

That's a 110 he just got a couple of weeks ago.  He got his brother the 112 version of it.  They're great cutting, very lightweight knives.  They just might talk me into picking one up  :facepalm:
Title: Re: OHT owners club!
Post by: Farmer X on April 01, 2022, 04:16:11 AM
They just might talk me into picking one up.
I will make no effort to dissuade you. The 112 I own is a great little knife.
Title: Re: OHT owners club!
Post by: Barry Rowland on April 20, 2022, 04:10:30 AM
I took Noah's lead and got a Kydex holster for my OHT.  It sure is comfortable wearing now :tu:
Title: Re: OHT owners club!
Post by: Poncho65 on April 20, 2022, 01:15:26 PM
Very nice looking sheath, Barry :tu: :like:
Title: Re: OHT owners club!
Post by: Barry Rowland on April 20, 2022, 03:06:20 PM
 :hatsoff: Thanks Poncho!
Title: Re: OHT owners club!
Post by: rishardh on April 21, 2022, 04:20:51 PM
KUIU Verde Camo. Was very lucky to score this one.

(https://uploads.tapatalk-cdn.com/20220421/9660d67842aa3aa01cb63741276608bb.jpg)


Sent from my iPhone using Tapatalk
Title: Re: OHT owners club!
Post by: pa_strunk on April 21, 2022, 04:32:59 PM
Sweet camo
Title: Re: OHT owners club!
Post by: Barry Rowland on April 21, 2022, 04:52:34 PM
 :iagree:
Title: Re: OHT owners club!
Post by: Poncho65 on April 21, 2022, 08:15:09 PM
Always loved that one :ahhh Congrats on tracking one down :salute: :like: :like:
Title: Re: OHT owners club!
Post by: Poncho65 on November 17, 2022, 11:30:39 PM
(https://i.imgur.com/pID6ayVh.jpg)
Title: Re: OHT owners club!
Post by: Adam5 on November 18, 2022, 02:50:39 AM
That one doesn't see the light of day very often. Nice pic  :like:
Title: Re: OHT owners club!
Post by: Poncho65 on November 18, 2022, 03:56:52 AM
No it doesn't  :whistle: I need to get it out more and carry it but I am not the greatest fan of it :D

I did get this one for a really good deal from, Etherealicer ;) :cheers: :D I did need one for my collection though :ahhh :D
Title: Re: OHT owners club!
Post by: Barry Rowland on November 18, 2022, 04:49:21 AM
 :cheers: Good to see it!  I'm getting ready to dust mine off :D. I'm feeling a challenge coming on next year
Title: Re: OHT owners club!
Post by: Poncho65 on November 18, 2022, 12:25:00 PM
Thanks Barry :hatsoff: I do believe that we have an OHT Badge already,  so we are ready for it anyways :D  :tu: :like:
Title: Re: OHT owners club!
Post by: Barry Rowland on November 18, 2022, 02:02:56 PM
That's great!  I remember the one a few years back.  Noah is the one who got me into the OHT.  He's had great luck with his.
Title: Re: OHT owners club!
Post by: Aloha on November 18, 2022, 09:44:20 PM
KUIU Verde Camo. Was very lucky to score this one.

(https://uploads.tapatalk-cdn.com/20220421/9660d67842aa3aa01cb63741276608bb.jpg)


Sent from my iPhone using Tapatalk

I clearly dont visit here often but goodness this is a gorgeous OHT.  Mine saw good action when I got it but its been a long while.  I thought it was an ok tool but blocky for my tastes. 
Title: Re: OHT owners club!
Post by: Spartan19 on December 23, 2022, 04:14:30 AM
Got some cold weather moving in tomorrow  :ahhh
Title: Re: OHT owners club!
Post by: Barry Rowland on December 23, 2022, 04:56:50 AM
 :like: :like:
Title: Re: OHT owners club!
Post by: Poncho65 on December 23, 2022, 04:21:16 PM
Looks like you already have cold weather :ahhh but the temps did drop a lot over night even here :o

Great pic, Spartan 8) :like:
Title: Re: OHT owners club!
Post by: Rich_SD on December 23, 2022, 06:05:25 PM
Great pics, everyone  :tu: 
Title: Re: OHT owners club!
Post by: Spartan19 on December 25, 2022, 05:18:11 PM
Looks like you already have cold weather :ahhh but the temps did drop a lot over night even here :o

Great pic, Spartan 8) :like:

Thanks poncho! :cheers:
Title: Re: OHT owners club!
Post by: SurgeUk on February 03, 2023, 05:23:47 PM
Here's my only OHT (with one of my Citizen watches) for B/O Friday  ;)
Stay safe awl... :drink: :salute:
Title: Re: OHT owners club!
Post by: Poncho65 on February 04, 2023, 01:24:56 AM
Here's my only OHT (with one of my Citizen watches) for B/O Friday  ;)
Stay safe awl... :drink: :salute:

Nice one,  Surge  8) :like: :like:

:nanadance:          :nanadance:
Title: Re: OHT owners club!
Post by: Barry Rowland on February 04, 2023, 01:40:42 AM
Surge, that's a great pic!  Would you have any interest in an OHT challenge in April, May, etc?  I have the Rebar Challenge coming up, and I think I'm free after that.  I know your work carry situation so it could be an at home only challenge for you.
Title: Re: OHT owners club!
Post by: LoopCutter on February 04, 2023, 08:06:54 PM
  [ This attachment cannot be displayed inline in 'Print Page' view ]  

Been a long time I visited this thread, great pictures you AWL.

Spartan I liked your Buck Slim Select too!  Good combo.
I carried a Red 112 with my OHT while doing maintenance gig at the Y. 

Title: Re: OHT owners club!
Post by: Poncho65 on February 04, 2023, 09:55:09 PM
Great pic,  LC :tu: :like:
Title: Re: OHT owners club!
Post by: LoopCutter on February 04, 2023, 10:21:41 PM
You are to kind!

Title: Re: OHT owners club!
Post by: Barry Rowland on February 05, 2023, 02:57:37 AM
Looking good LC!!
Title: Re: OHT owners club!
Post by: Poncho65 on June 15, 2023, 06:05:00 PM
 :salute:

(https://i.imgur.com/44JcVKFh.jpg)
Title: Re: OHT owners club!
Post by: Barry Rowland on June 15, 2023, 10:44:20 PM
 :tu:  :tu: :like:
Title: Re: OHT owners club!
Post by: Poncho65 on June 15, 2023, 11:43:04 PM
Thanks Barry :hatsoff:
Title: Re: OHT owners club!
Post by: Rich_SD on June 25, 2023, 11:13:06 PM
(https://i.imgur.com/v1qttXA.jpg)
Title: Re: OHT owners club!
Post by: Poncho65 on June 26, 2023, 01:30:30 AM
I have the silver but really would love the Coyote one even if I really don't like the OHT :facepalm: :rofl: :like:
Title: Re: OHT owners club!
Post by: Rich_SD on June 26, 2023, 01:57:49 AM
I have the silver but really would love the Coyote one even if I really don't like the OHT :facepalm: :rofl: :like:

Haha!  :rofl:  I have both for the same reason (to complete a color set).
Title: Re: OHT owners club!
Post by: Poncho65 on June 26, 2023, 01:59:16 AM
 :rofl: collecting is both fun and a curse at the same time sometimes :D
Title: Re: OHT owners club!
Post by: Barry Rowland on August 16, 2023, 05:57:43 AM
Got mine out today to play with.  With the kydex  sheath I hardly realize it's there!  I was thinking, for a tool with military intentions, I'm surprised there isn't a cap crimper plier head offered.
Title: Re: OHT owners club!
Post by: Poncho65 on August 16, 2023, 12:13:16 PM
 :iagree: you would think it would have that option :think: :salute:
Title: Re: OHT owners club!
Post by: Barry Rowland on August 21, 2023, 08:34:01 PM
Has anyone looked at what is being asked for one of these tools on the Bay??!! :o
Title: Re: OHT owners club!
Post by: Poncho65 on August 21, 2023, 09:02:39 PM
Not lately :dunno: how expensive we talking, Barry :ahhh
Title: Re: OHT owners club!
Post by: Barry Rowland on August 21, 2023, 11:07:10 PM
Anywhere from $150 up to the mid $300's.  I like the tool, but I'm not sure why the market price is rising except that it's out of stock?  :think:
Title: Re: OHT owners club!
Post by: Poncho65 on August 22, 2023, 12:26:26 AM
Yeah :ahhh I don't get that kind of price for the OHT :facepalm: :o :D
Title: Re: OHT owners club!
Post by: zoidberg on August 22, 2023, 12:34:45 AM
(https://www.memesmonkey.com/images/memesmonkey/eb/eb332168eb0d165a7dd271bd2e7852e7.jpeg)
Title: Re: OHT owners club!
Post by: Rich_SD on August 22, 2023, 04:08:24 AM
Anywhere from $150 up to the mid $300's.  I like the tool, but I'm not sure why the market price is rising except that it's out of stock?  :think:

 :o  (https://emoticons.datahamster.com/eek.gif)  (https://emoticons.datahamster.com/fainting.gif) 
Title: Re: OHT owners club!
Post by: Barry Rowland on August 22, 2023, 02:20:02 PM
 :iagree:
Title: Re: OHT owners club!
Post by: Barry Rowland on September 20, 2023, 06:59:57 PM
Keeping it going with another fun use!  I also put the saw to work today cutting some branches from a trail.
Title: Re: OHT owners club!
Post by: Poncho65 on September 20, 2023, 07:50:08 PM
Great pics,  Barry :like: :like:
Title: Re: OHT owners club!
Post by: Barry Rowland on September 20, 2023, 08:31:56 PM
 :hatsoff: Thanks Poncho!
Title: Re: OHT owners club!
Post by: genevabuck on September 21, 2023, 11:58:25 PM
Leatherman has announced that the OHT has been designated for retirement.  They are putting out the last of their stock now.
Title: Re: OHT owners club!
Post by: Poncho65 on September 22, 2023, 12:26:47 AM
Juat saw this in another thread and I am glad I ar least have the one I have :ahhh

So the Free P4 could possibly be going away as well ??? :ahhh
Title: Re: OHT owners club!
Post by: Barry Rowland on September 22, 2023, 02:43:17 AM
Me too Poncho.  That might explain why they're so pricey on the used market.  I think I'm in the minority, but I actually really like mine.  The implements are a little short, but it seems like a rugged tool.
Title: Re: OHT owners club!
Post by: Rich_SD on September 22, 2023, 04:08:46 PM
Nice pic, Barry  :tu:
Title: Re: OHT owners club!
Post by: Barry Rowland on September 22, 2023, 04:20:20 PM
 :hatsoff: Thanks Rich
Title: Re: OHT owners club!
Post by: SurgeUk on September 22, 2023, 06:57:37 PM
Keeping it going with another fun use!  I also put the saw to work today cutting some branches from a trail.

:like:

Same but different  :think: :dunno:

Posing with a Thin Blue Line patch for BOF  :salute:
Title: Re: OHT owners club!
Post by: Poncho65 on September 23, 2023, 12:33:20 AM
Nice one,  Surge 8) :like: :like:
Title: Re: OHT owners club!
Post by: SteveC on September 23, 2023, 01:26:56 PM
 :iagree: :tu:
Title: Re: OHT owners club!
Post by: Barry Rowland on September 23, 2023, 01:40:56 PM
That's the first UK Blue Line I've seen.  Very nice!!  :like: :like:
Title: Re: OHT owners club!
Post by: SurgeUk on September 23, 2023, 04:09:35 PM
Cheers Poncho, Steve & Barry  :cheers:

We've had the Thin Blue Line for a few years now https://www.thinbluelineuk.org.uk/store/

I wear a version - the Thin Purple Line* (seen here in the Batman Challenge)

* Border Force & Immigration Enforcement
Title: Re: OHT owners club!
Post by: Poncho65 on September 23, 2023, 04:53:35 PM
Very cool vest 8) :like:
Title: Re: OHT owners club!
Post by: Barry Rowland on September 23, 2023, 11:28:20 PM
 :iagree:  We're finally going to vests, but just after I'm gone.  I turn in my kit in May and getting turned out to pasture  :D

Thanks for the link by the way!  :cheers:

I have the same cuff key you do Surge! 
Title: Re: OHT owners club!
Post by: SurgeUk on September 25, 2023, 02:17:03 PM
Very cool vest 8) :like:

 :hatsoff: It is, of course, one of the cheapest options but that's the UK Gov't for you  ::)

:iagree:  We're finally going to vests, but just after I'm gone.  I turn in my kit in May and getting turned out to pasture  :D

Thanks for the link by the way!  :cheers:

I have the same cuff key you do Surge! 

I wouldn't mind being put out to pasture but unfortunately I'll be lucky to retire at the current mandatory age of 67 (11 years away) such has our pension been been diminished (read hatchet job  :poh:)

That's my 3rd 'cuff key (of that brand) but they are good and you can't beat the extra inches.... :whistle: (go on PF  ::))
Title: Re: OHT owners club!
Post by: Barry Rowland on September 25, 2023, 02:40:14 PM
Sounds like my bunch Surge :facepalm:  We're mandatory at 60 but I've been around long enough that I could use my military service as credit for a few years.  Unfortunately for the newer people, that option was taken away. 

I wanted to carry the OHT on duty but the Super Tool sheath I have on my duty belt isn't wide enough.  I think it would be a good carry multi tool.  It's neck to neck with the Swisstool RS weight wise. 
Title: Re: OHT owners club!
Post by: SurgeUk on September 25, 2023, 06:46:34 PM
I feel your pain Barry. It seems that Gov't BS is the same worldwide  ::)

I can probably shave off a few years with Military & Police service as well but, the equations aren't very favourable  :cry:

I'm using A.N. Other LM sheath with mine but as I don't really get with the OHT, it's not an issue (I love my OG Surge)
Title: Re: OHT owners club!
Post by: Barry Rowland on September 25, 2023, 10:23:28 PM
I'm  OG Surge too.  I like the larger multitools. 
Title: Re: OHT owners club!
Post by: McStitchy on October 12, 2023, 08:34:55 PM
Cool pics Barry and Darren  :like:
I love the larger tools too.

Had my BO OHT out on a hike today. I too used the saw to cut off a branch that was hanging over the trail (no pic of that unfortunately).

But I took these ...

(https://i.imgur.com/HkgUMrt.jpg)

(https://i.imgur.com/gjBxaDA.jpg)
Title: Re: OHT owners club!
Post by: Barry Rowland on October 12, 2023, 08:55:40 PM
Great pics Stitch!  :like: :like:
Title: Re: OHT owners club!
Post by: McStitchy on October 12, 2023, 09:39:29 PM
Thanks Barry  :hatsoff:

I was a little tired after work and kinda dragging myself up that trail. But it was worth it  :P
Title: Re: OHT owners club!
Post by: Poncho65 on October 15, 2023, 03:17:38 AM
Great pics,  Stitchy  8) :like: :like:
Title: Re: OHT owners club!
Post by: McStitchy on October 15, 2023, 02:30:21 PM
Thanks Phil...  :cheers: