Multitool.org Forum
Tool Talk => Leatherman Tools => Topic started by: captain spaulding on December 19, 2011, 09:34:43 AM
-
Well I just posted in the "What's your latest SAK?" thread and figured we needed a Leatherman version of it. :D If this was already started than Mods please close this. :tu:
I just received a few new Leathermans so here are the newest additions. (pics will come soon)
Sidekick
Skeletool
Micra (Blue)
Micra (Red)
-
my LM freestyle has arrived, cant touch it till xmas day tho.
-
my LM freestyle has arrived, cant touch it till xmas day tho.
It will make it all the better when you get it. :tu:
-
Super Tool 300. I took it out to the gge to meet the other tools and it didn't go so well. RIP ST3.
-
My obsession is just beginning.
I have a Style PS coming on Christmas day and a Wave shortly after. I sense a slippery slope?
-
my LM freestyle has arrived, cant touch it till xmas day tho.
It will make it all the better when you get it. :tu:
I'm itching to play with it, it comes with a LM AAA tourch and combo sheath. Can't wait :ahhh
-
I got a knifeless fuse several months ago, and a wave for my little brothers bithday.
I feel no need fro more Leathermans for the time being, at least ntil the Rebar comes out :P
-
(http://i140.photobucket.com/albums/r12/rioredgt/EDC/photobucket-15032-1324193223258.jpg)
Robert
-
Style PS I think.... the Rebar will probably be next on my list too :)
-
Latest 3:
Sidekick
Style CS
Juice S2
Already sold the Sidekick, hope to add Charge TTi soon. Loving that Juice tho.
-
The last three for me ......
SideKick
Style PS
Wingman
-
This PST. :)
-
Last three:
BO ST300
Style PS
Wingman
-
Last three: Skeletool, Freestyle and micra :tu:
Style PS I think.... the Rebar will probably be next on my list too :)
That's on my list too :tu:
my LM freestyle has arrived, cant touch it till xmas day tho.
It will make it all the better when you get it. :tu:
I'm itching to play with it, it comes with a LM AAA tourch and combo sheath. Can't wait :ahhh
Well I hope your torch works okay, the one I recently traded is intermittent :o rather annoying :-[
My obsession is just beginning.
I have a Style PS coming on Christmas day and a Wave shortly after. I sense a slippery slope?
Oh yes ::) its a good job the MTO don't do loans, we'd all be very very poor :ahhh
-
My most latest was a '96 PST.
But, before that (counting from newest to oldest), another Wave, Wingman, another Wave, Style PS, and another Wave...... I like Wave's :D
-
last I had was my Style PS. :)
-
last I had was my Style PS. :)
Love my PS now. :tu:
-
MTO Style PS.
-
I bought a Style PS from Ebay on November 14th, it just showed up today after spending a few weeks lost in the USPS system :ahhh
Very nice little tool :tu:
-
BO LM Wave otw :D
-
I used a '91 PST until just a couple weeks ago when I retired it and my buddy gave me a Wave. Hopefully I can go at least another 20 years or so without having to replace my Leatherman.
-
I know I'm behind on the times, but I got a Supertool 300 within the last year. However, there should be a Wingman waiting for me under the Christmas tree.
-
My latest addition is my Wave. Boy oh boy is it sharp.
-
My latest addition is my Wave. Boy oh boy is it sharp.
They are sharp alright , I had to have surgery on my thumb after I slipped with with my wave while carving a pumpkin .
-
I just joined the Wave & Juice s2 club. Love the Wave.
I'm actually trading the juice away. It seems redundant in my edc (a Sak & squirt). What I need is a real flashlight & the trade is in the works.
(FYI. If I'm working or snowboarding the Wave replaces the squirt)
-
Plans this weekend to add Charge TTi :D
-
im trying to raise the funds for a supertool 300 but its not looking great so far :cry:
-
kf4 brand new from amazon :-)
-
Plans were a success, got a TTi in my pocket right now. Now I'm Ready.
-
Another skeletool
-
A Supertool 300.
-
A Wave, but...................that was over a month ago. :think: I'm definitely due :D
-
My BO Wave came in today! Oh so nice. Pics later as I'm playing with it now.
-
My latest was a kick with pocket clip but my cousin liked it so much I gave it to him for Christmas tonight.
-
My BO Wave came in today! Oh so nice. Pics later as I'm playing with it now.
Glad you finally found a BO Wave. :tu:
-
Charge TTi is my newest Leatherman but I've just ordered Wave since my Charge was sent on warranty and I need something for new years ;)
After my Charge gets back I'm thinking about swapping its plier head with Wave (can anyone confirm they are the same size? I'm assuming they are.) I never ever use the crimper on the pliers and I would like larger gripping area.
-
Charge TTi is my newest Leatherman but I've just ordered Wave since my Charge was sent on warranty and I need something for new years ;)
After my Charge gets back I'm thinking about swapping its plier head with Wave (can anyone confirm they are the same size? I'm assuming they are.) I never ever use the crimper on the pliers and I would like larger gripping area.
You shouldn't have any problems. They are exactly the same size. :tu:
-
Got a Leatherman bit extender in my stocking this morning, does that count? haha
-
In Laws got me a Sidekick :)
Great tool & all, haven't opened it from the package yet. They included a gift receipt, and after checking the store's website I found they paid $44.99 for it, which means I will probably find time tomorrow to exchange it. For $45 I could get one at regular price with $5-10 to boot. Normally I would be all over this, but I bought one earlier this year & sold it, just not for me.
-
BO Surge
-
just used a amazon card i got from xmas to order my first supertool 300. should be here by thursday. i cant wait :ahhh :ahhh
-
Im playing with my Supertool 300/Monarch my dad got me for Christmas! :DDDD
Love it, sure you will to^
-Austin
-
Im playing with my Supertool 300/Monarch my dad got me for Christmas! :DDDD
Love it, sure you will to^
-Austin
ive wanted one for a while, and it was a mix between getting a amazon card for xmas, and seeing the pics of yours that made me pull the triger to get one.
-
Good call mate.
I have had a slight problem with mine however, the can opener tip occasionally pushes itself through the spring to the outside. Anyone else had this?
-
Returned the Sidekick, got my store credit gift card for $48.70 to Bass Pro Shop, not sure what I want to spend it on yet.
-
Three replacements from the LM dealer here, and some pins.
Freestyle, BO Wave and Ps2
(http://i1230.photobucket.com/albums/ee484/jladks/toys/74caf7fe.jpg)
Ninja!!!!
(http://i1230.photobucket.com/albums/ee484/jladks/toys/4e2042d7.jpg)
-
that pin looks cool. i didnt know leatherman did pins. very cool :tu:
-
that pin looks cool. i didnt know leatherman did pins. very cool :tu:
I have seen them in the forum here and on Ebay before, but I have not seen the one I have, with the Original Supertool.
There seem to be a few with Supertool 200 around.
-
Just got a belated Christmas present: a newer Juice Xe6! It's awesome but I'm not sure I like the new way they're printing the names on the Juice line. I really liked having Leatherman on one side and the model on the other.
-
Just got a belated Christmas present: a newer Juice Xe6! It's awesome but I'm not sure I like the new way they're printing the names on the Juice line. I really liked having Leatherman on one side and the model on the other.
i didnt know they had changed it. im guessing from what you have said, that its all on one side now? and pics?
-
The name is in all CAPS too, which I like. My new Juice S2 as the new style printing.... LEATHERMAN looks more official & tougher to me than leatherman, especially when printed on a tool. The all lower-case logo is too stylish/metro to have a place on a tool. That's just me.
-
Just got a belated Christmas present: a newer Juice Xe6! It's awesome but I'm not sure I like the new way they're printing the names on the Juice line. I really liked having Leatherman on one side and the model on the other.
i didnt know they had changed it. im guessing from what you have said, that its all on one side now? and pics?
Sure thing! (Hope you don't mind the weird angle, it makes it look like one side is longer but I promise it isn't.) The logo is starting to grow on me, it just looked weird for a while!
(http://i.imgur.com/lp8Rs.jpg)
-
My super tool 300 arrived yesterday and I'm in tool heaven today. I luv it. I'll post pics when I get the time.
-
Two Sidekick: Sweet ;)
-
LM PS4 :cheers:
-
This :tu:
(http://farm8.staticflickr.com/7174/6595734523_6f5913c152_z.jpg)
Also posted here (http://forum.multitool.org/index.php/topic,20415.msg552648.html#msg552648)
-
@badwolf, that pulse looks mint mate. very nice :drool: :multi:
-
Mine is the PS4 with the greyish black handles.
I love it.
-
A wingman and then a charge tti. Both ends of the line.
-
@badwolf, that pulse looks mint mate. very nice :drool: :multi:
Thanks 5hif7y :tu: and its razor sharp, as my thumb found out :o
-
Today I just picked up a BO ST300. Within the last month I also picked up a sidekick and a wingman. My next Leatherman will probably be a surge.
-
Just got my Wave today. This thing is freaking sweet!!!!!
-
I pickup up a Wingman about 3 weeks ago $20 of amazon. Pickup up an Charge ti off ebay two days ago. Should be here this week.
-
This was a realy good start for 2012
(http://i1124.photobucket.com/albums/l562/lacket/b623213b.jpg)
Thanks to Travis
-
Recently got 2 PST's, Blue Micra, and a NIB Squirt P4. :tu:
-
:D.. my last LMs in 2011 was a MTO Style CS #006...
i'll need to get back to Travis to get a MTO Style PS if there is still left :o
ugh...before that was a BO's : PST CC,Supertool,ST200... sorry didnt come in time and update in this post! :pok:
-
Here is my new Leatherman Charge WTi (WaveTi) >:D
(Sorry for the crappy quality, low light + cellphone = crappy pictures ;) )
(http://www.classicgod.org/Uploads/chargewti.JPG)
(It's dripping with oil right now - I cleaned all the factory lubricant and replaced it with Victorinox Multi-Tool Oil)
Like I mentioned few days ago I was planning to transplant Wave plier head to my charge TTi. Transplant went fine, patient lives and is in full health >:D
Donor is in pieces at the moment but she will live :D
-
i just got the juice xe6, bo wave and a wingman for christmas and i order a pst the other day. :D
-
My latest would have been the xe6 in gray if it wasnt on back order. i got the pouch today but no knife.
-
My first LM was the a Supertool, back in 1994. I once used it to free a 10-point buck who'd got his antlers tangled in the ropes supporting a new pine tree. I left that Supertool with a fellow monk when I left the monastery in 2000.
My second LM is a Juice, which I'm planning to sell on this website. It's almost my latest, except that the new Skeletool is on the way and will arrive tomorrow.
Can't wait!
New here. Cool boards!
-
Gave a few LMs to friends and family (waves, blasts, and squirts). Liked the blast so much decided to get the black oxide one for myself.
-
A Wingman. Thought it was stamped cheap looking steel when I first examined the package and walked away. On the third sortie I took a chance and bought one. Fell in love with the precision clicking and the high polish shiny stainless steel. Now it is permanently bonded to my person, even replaces the charge TTI.
Something about it makes it just my favourite Leatherman. Not sure what it is but when I figure it out I'll let everyone know.
-
New SURGE! came today. :D :drool:
-
New SURGE! came today. :D :drool:
:ahhh :ahhh :ahhh
I still need to get a Surge to add to the collection.
-
I couldn't help it, I just ordered a seclusion 3D tti. It's actually on sale right now at cabelas but it still hurt the bank account hard.
-
BO Mut :D :2tu:
-
I couldn't help it, I just ordered a seclusion 3D tti. It's actually on sale right now at cabelas but it still hurt the bank account hard.
Good choice. :tu: :)
-
I couldn't help it, I just ordered a seclusion 3D tti. It's actually on sale right now at cabelas but it still hurt the bank account hard.
congrats :tu: now you may opt' to complete 3D Sec lines; Ti, xTi... (yes... they do pop up once in a while in fleabay), OR...look up on the other Charge Camo (Bass Pro :think:).. >:D
-
BO Mut :D :2tu:
(http://img845.imageshack.us/img845/5465/1001023c.jpg)
(http://img857.imageshack.us/img857/4664/1001024x.jpg)
(http://img233.imageshack.us/img233/7668/1001025h.jpg)
(http://img820.imageshack.us/img820/7708/1001026h.jpg)
-
(http://img.tapatalk.com/4492de28-5845-197d.jpg)All thanks to Sazabi! Day two and I've managed to get the OHO technique on the crunch pretty smooth! It might be my favourite MT ever. Anyone know of a BO Crunch?
Stay multi my friends
-
(http://img.tapatalk.com/4492de28-5845-197d.jpg)All thanks to Sazabi! Day two and I've managed to get the OHO technique on the crunch pretty smooth! It might be my favourite MT ever. Anyone know of a BO Crunch?
Stay multi my friends
I'd be second in line for a BO crunch, right behind yah.
-
my last four all a few days apart
juice xe6
bo wave
wingman
pst
-
Received it yesterday!
(http://oi44.tinypic.com/2m4pyy8.jpg)
-
Just ordered a charge tti.
-
Received it yesterday!
(http://oi44.tinypic.com/2m4pyy8.jpg)
Now that is nice!
-
Style cs, charge tti , juice xe6, also the universal tool holder.
-
Inferno red Squirt P4 :D
-
Very nice John. :tu:
-
Got a new e4 coming my way soon.
-
Just got a Blast!
-
I have an ST300 coming from a member here.
-
Just got a Blast!
+1, my latest, and only Leatherman!
-
New old stock Mini Tool!!!! I can't believe how small this thing is in hand, for sure it could go on car keys. Love it!!!!! I can't believe they discontinued it, it's such a cool design.
(http://i1117.photobucket.com/albums/k587/Syph007/Mini%20Tool/th_IMG_1806.jpg) (http://s1117.photobucket.com/albums/k587/Syph007/Mini%20Tool/?action=view¤t=IMG_1806.jpg)
(http://i1117.photobucket.com/albums/k587/Syph007/Mini%20Tool/th_IMG_1807.jpg) (http://s1117.photobucket.com/albums/k587/Syph007/Mini%20Tool/?action=view¤t=IMG_1807.jpg)
(http://i1117.photobucket.com/albums/k587/Syph007/Mini%20Tool/th_IMG_1808.jpg) (http://s1117.photobucket.com/albums/k587/Syph007/Mini%20Tool/?action=view¤t=IMG_1808.jpg)
(http://i1117.photobucket.com/albums/k587/Syph007/Mini%20Tool/th_IMG_1809.jpg) (http://s1117.photobucket.com/albums/k587/Syph007/Mini%20Tool/?action=view¤t=IMG_1809.jpg)
-
Camo Fuse!
(http://img850.imageshack.us/img850/416/dscf0832p.jpg)
-
SS ST300.
-
I bought a Sidekick today at Cabelas, while I was there looking for a MAD BOMBER hat. I never did get the hat, but bought a couple of pairs of gloves besides the Leatherman. :D
-
I now have the Blast and the Wave both in black oxide and i would be lost with out them,
thank you Leatherman
:climber: :sak:
-
Our Sears is going out of business. Got 50% off on a Wingman (First one was broken, oddly enough. Exchanged it for one that does work) and the total was like...15 bucks, I think.
-
Thought I would share with a Picture of my new Kick
-
My latest is a Supertool, circa 1995. My father has an old knife collection and during some housecleaning my mother found a box of his knives hiding in the closet. He was showing me the knives Sunday and I spotted a lone Leatherman sheath in there. I told him I wanted it, and when I opened it and looked there was a like new Supertool in there. It is significantly larger and heavier than my PST II.
-
My latest as of today would be the Crater c33Tx Black..... I love it!
-
Sideclip :drool:
(http://i613.photobucket.com/albums/tt214/OCPSucked/IMG00417-20120202-1911.jpg)
-
nice!
-
I was able to get a Wingman for 50% since my Sears is closing. Sadly the massive amount of Waves WERE NOT discounted. I would've bought all of them and sold 'em for a profit.
I was in the local antique mall yesterday. Saw in the case an original Supertool and in another case a Leatherman Sheath holding what I suspect was a Supertool. Might go back tomorrow before having a drink at the pub and see what the quality is. This place has absurdly high mark up....so it's always a turn off.
-
I just got the Style CS cheap thanks to Big-dog and the UK group buy. :tu:
Next to my first ever LM, the Skele CX.
(http://i493.photobucket.com/albums/rr294/nickpong/P2030004.jpg)
-
Cool.... they look so nice together :D
-
nice!
Thanks! I've wanted a sideclip for a LONG time but never wanted to folk over the money. I was so happy I received this in trade. I LOVE it! :woohoo: :hatsoff:
-
Sideclip :drool:
(http://i613.photobucket.com/albums/tt214/OCPSucked/IMG00417-20120202-1911.jpg)
Excellent choice Ash.. 8) 8)
-
EL4 arrived. Now time to rip it apart and that will be the end of my LMs. Until someone here decides to sell that BO Camo prototype.
-
I don't own a BO camo charge. ::)
-
My latest is Sidekick.
(http://i42.tinypic.com/aw6o8h.jpg)
-
Chako has the one I want :rant: :twak: Gimmie it Chako!
-
The one I edc lately is one of my most recent, it is the sidekick. I modded it a little by taking the serrated knife out from the inside and putting scissors from a wave in there.
-
Chako has the one I want :rant: :twak: Gimmie it Chako!
:rofl: :rofl:
-
Latest leatherman... :think:...oh.. a NIP KF4..whoa..it did took a v long time to come..o :think:
Nicely sorted Tool marking and USA. ..
Steve..which camo?
-
Got A Leatherman Skeletool With The Plain Edge Blade. :multi:
Pretty Damn Excited About It Lol.
Did I Mention It's Plain Edge? :D
-
Amici,
Leatherman Juice C2 for the groovy red finish, simply amazing..
Cheers,
Serge
-
I got a package today with not one but THREE in it! skeletool, charge ALX and Juice S2.
-
I got a package today with not one but THREE in it! skeletool, charge ALX and Juice S2.
Very nice! Is the skele PE or CE? Mine is PE thanks to my buddy kirk13 here on the forum!
Sent from my BlackBerry 9370 using Tapatalk
-
Very nice! Is the skele PE or CE?
It is CE. I have mixed feelings about it. I normally prefer PE for knives, but for a tool I think CE might be OK.
-
I bought a MUT yesterday at Cabela's. Yeah, I know, I know, I paid too much, but I wanted it right away. So far, I really like the military style case, and the tool is fantastic.
-
Did you get the EOD or the stainless? I have the EOD and i love it.
-
Did you get the EOD or the stainless? I have the EOD and i love it.
I got the SS one, the EOD model was not available in the store I went to. I do not think I could have made any use of the EOD features anyway. So in the end, I am happy, this tool will fit in well with my Leatherman collection going back to my original PST.
-
Lol. Thought I was done. Guess not. I have a skeletool and a BO MUT on the way. Damn guys and gals cut it out.
-
There Are A Few I Want To Get.
-
I'm pretty sure the MUT was my last Leatherman purchase. It goes something like this...
(http://i269.photobucket.com/albums/jj58/drkpics/001a.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/007a.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/008a.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/009a.jpg)
It's a real powerhouse, IMHO.
-
Yeah... It has it's appeal. Especially in combination with a more traditional tool with all the little bells and whistles. Have you used the hammer? That's something i never thought would actually work that well or be used. But i love it and it is.
-
Not all mine
Loving it though
-
I have already posted in this thread that the MUT was my lastest Leatherman, but things often change, and this is one of them. I just got off of that auction site where I purchased a new Wave and a new Micra! It says they will get here between 2/16 and 2/19. I'm pretty stoked about the Wave because I have heard so much about it.
In all of my involvement here at Multitool.org, I have learned that one can never own too many MT's. My goal is to knock out all of the Leathermans I can get my hands on, and then I think I will concentrate on Victorinox.
By the way, could someone please explain this to me - Are Swiss Army and Victorinox two different companies, or is Swiss Army a generic term, or does Victorinox make all Swiss Army knives and MT's. Thanks!
-
Hammer..i found MTo are enablers.. :D
just search for The Great Leatherman show off thread'...it will spell out what's in store
for LM multi's..currently grinding to halt due end of whats available from LM :D
http://forum.multitool.org/index.php/topic,18149.0.html (http://forum.multitool.org/index.php/topic,18149.0.html)
-
Hammer..i found MTo are enablers.. :D
just search for The Great Leatherman show off thread'...it will spell out what's in store
for LM multi's..currently grinding to halt due end of whats available from LM :D
http://forum.multitool.org/index.php/topic,18149.0.html (http://forum.multitool.org/index.php/topic,18149.0.html)
So if you have $8000 and 5 years (and the luck to be able to find them) you might get a partial collection.
I will have to loosen the bounderies of my collection and see where it takes me. I'll draw the line when they become little specialized dremel tools!
-
Hammer, the same company that makes Victorinox Multitools also makes Swiss Army Knives. I don't know why something is called different, but i'm sure you can find it on this website or on the internet.
-
By the way, could someone please explain this to me - Are Swiss Army and Victorinox two different companies, or is Swiss Army a generic term, or does Victorinox make all Swiss Army knives and MT's. Thanks!
I'm not an expert but my understanding is that there are 2 companies that have both made products under contract with the Swiss Army, Wenger and Victorinox, so they both claim that they sell "official swiss army knives".
-
By the way, could someone please explain this to me - Are Swiss Army and Victorinox two different companies, or is Swiss Army a generic term, or does Victorinox make all Swiss Army knives and MT's. Thanks!
I'm not an expert but my understanding is that there are 2 companies that have both made products under contract with the Swiss Army, Wenger and Victorinox, so they both claim that they sell "official swiss army knives".
Victorinox and Wenger are both Swiss based knife makers, though IIRC Vic was founded first. Vic bought out Wenger back in 05 or so and both brands are owned by Vic and produced under their respective names.
Vic has always claimed the "Original" SAK while Wenger advertised as the "Genuine" SAK.
Victorinox currently has the only Swiss Army contract to make their Soldier model based on the One Handed Trekker.
-
Victorinox and Wenger are both Swiss based knife makers, though IIRC Vic was founded first. Vic bought out Wenger back in 05 or so and both brands are owned by Vic and produced under their respective names.
Vic has always claimed the "Original" SAK while Wenger advertised as the "Genuine" SAK.
Victorinox currently has the only Swiss Army contract to make their Soldier model based on the One Handed Trekker.
:salute:
Just out of curiosity, Wenger "speaks" french while Victorinox does german.
-
Charge tti seclusion, Sqirt ps4 ( blue ), Juice cs4 ( blue ), new tool adapter, black med Molle pouch,and a couple of t shirts from LM.
-
Just got the Super Tool 300.
Man this is friggin awesome!!!!!
-
Today i got 3 BO PST no CC BNIB from the US posted, my cs4 back from leatherman warranty, and a Blast. Also for valentines day a PST 2 in excellent condition :) what a great day! :multi:
Just waiting on my KF4 which is in the post now then no more til next month :ahhh
-
I recieved my Charge this week, so another family member to welcome. Made a couple of pics, the collection is still small to what some of you guys on here have. I Have ordered a squirt ES and a surge, so hope that will be here next week or so.
For the tools I have now; the style is on my keyring, the charge I have in my car, the skeletool is in my civilian clothes and the MUT is on my dutybelt, use it a lot.
When the OHT will come out I think it's gonna replace the MUT, but only when the OHT had the Bob (J-sews) mod on them :D
-
just paid for a Juice CS4 on the 'bay, won't be here for a while though (ships to my good friend Dan in AZ who will then fwd it to me, along with more cool gear :) )
-
just paid for a Juice CS4 on the 'bay, won't be here for a while though (ships to my good friend Dan in AZ who will then fwd it to me, along with more cool gear :) )
Hi, Gergő! (http://i493.photobucket.com/albums/rr294/nickpong/Smiley/wavey.gif)
:climber:
:2tu:
Also, pics are mandatory upon arrival. :D
-
Latest and..
my favorite and now EDC!
Just keep it simple and lean and clean.
The black one
(http://i1135.photobucket.com/albums/m634/Airgrips/BestMultitool.jpg)
Ive tried the fat do-everything ones like the Core, and it's bulky, so That one will live in the glove box of my boat.
-
Have bids on 2 Skeletool's on Ebay.
-
I took the headstaggers and bought a Juice KF4,and man is it brilliant!
-
I took the headstaggers and bought a Juice KF4,and man is it brilliant!
Makes you wonder why they quit making it, doesn't it? :think: :-\
-
It does!Kinda like a mini Wave,but very functional,handy size and weight....if it had scissors too!Ah bugger the rebar,bring back the KF4
-
Just got a like new Kick with clip on another forum for $20.00 shipped. Nice smaller tool and now rides in the watch pocket of my jeans.
-
This could be a never ending thread as far as I'm concerned. I just went on ebay and bought a Juice C2 and a Blast. Next week it will probably be 2 more of the Juices, say, the Juice Cs4 and the Juice S2. The following week would be the Juice Xe6, which would finish up the Pocket Size category for me. I already have the 6 tools that make up the Keychain category, so looking at the Heavy Duty category, I have the MUT, Super Tool 300, and the Surge, so if I get the Crunch, that would finish the Heavy Duties off. That leaves the Full-Size Tools. I'll have the Blast, the Charge Tti, and the Wave, leaving me lacking the Charge AL, the Charge ALX, the Rebar, the sidekick, and the Wingman. So that's 9 more MultiTools before I have the current run of Leatherman MultiTools.
-
I would love to get my hands on a Charge one of these days.
-
Never used.
(http://i1135.photobucket.com/albums/m634/Airgrips/BrandnewPST-.jpg)
(http://i1135.photobucket.com/albums/m634/Airgrips/BrandnewPST.jpg)
(http://i1135.photobucket.com/albums/m634/Airgrips/BrandnewPST---.jpg)
-
:drool: :drool: :drool:
-
very nice. :tu: Can I ask what the date stamps are?
-
very nice. :tu: Can I ask what the date stamps are?
0693 both sides.
-
Very cool. :tu:
-
Squirt ES4
I've been promising myself one of these for years as I'm endlessly stripping fine wires and, when I've no fullsize tool, the SOG Crossgrip on my keychain isn't really that nice to use.
I gotta say, i'm really impressed with the quality of it (1st squirt I've ever owned), it snaps into the open position and is very precise to use. I thought the size might be an issue for regular use, but it sits nice in my hand and the matt finish on the handles gives excellent grip so I think it'll get called upon quite often. Nice one LM :tu:
(http://i279.photobucket.com/albums/kk140/buchos400/Image1.jpg)
(http://i279.photobucket.com/albums/kk140/buchos400/Image4.jpg)
(http://i279.photobucket.com/albums/kk140/buchos400/sqhand.jpg)
-
A Radioshack marked E4 in good shape other than some pocket wear, and a PST II that looks like it was lightly used. Only real sign of wear is a little bit around the fish hook groove on the file.
-
I bought a Squirt PS4 about a week ago. It has gone with me everywhere, great little tool.
PS I bought the black one
-
I bought a LM Crater c33 yesterday at Sears. Something to open stuff with at work.
-
Mines the Charge Tti and I love it!!
-
I just got a skeletool CX after taking the Leatherman factory tour. so far I really like it. then again the skeletool has been one of my most used tools for a few years now so I'm not too surprised.
-
My Blast and Juice C2 arrived via Fed Ex today. 2 more cool toys for me to fondle. The Blast came with what looks like a nice leather case with a snap closure.
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/010.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/006-1.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/007-1.jpg)
-
You are really going to enjoy your Blast, I think it's possibly the best tool ever!
-
I was at L.L. Bean in Freeport Maine tonight, and bought a LM Charge ALX while I was there. What a sweet multi-tool, smooth, nice workmanship. The grind on the knife blade is a little wobbly near the curve of the blade, but it is a very minor issue if one at all. When the Rebar comes out, I hope I have enough money to buy one with all the multi-tools I have been buying as of late, LOL.
-
I've been looking for an original LM PST and have had no luck finding one. Today at a yard sale I come across an unused discontinued LM sideclip (cost me $10). This thing is nice! My EDC is a LM Charge alx, which IMO is the best money can buy. But this sideclip is half the thickness and has less tools on it (12) but has everything I need. It's easier to carry in pocket then the charge and weighs a lot less.
My charge will be kept in my toolbox at work now and I'll carry my sideclip everyday along with my Benchmade auto Presidio.
-
The postman arrived today. I bought two LM's from e-bay last week and already here!
(https://lh5.googleusercontent.com/-f2ASG2AU8WQ/T2C_sjiSlGI/AAAAAAAAAF8/E1QwNfpa6PM/s512/20120314_163613.jpg)
The pink one is for my girlfriend her keychain. There was a complemantairy led lenser keychain light in the package and I was supprised at how bright this little light is.
(https://lh5.googleusercontent.com/-G7X7jsgsovA/T2C_t5KRhpI/AAAAAAAAAF8/XERaCBd9NXE/s512/20120314_163716.jpg)
The squirt ES will be mine to play with. One thing I noticed is there are nog screws that can be tightened anymore....strange since I found some play on the pliers. Normally tightening the screws up solves this.....strange move by Leatherman
(https://lh5.googleusercontent.com/-1dkksTdDKso/T2C_sc5XnXI/AAAAAAAAAF8/J3cUxbGQtDI/s512/20120314_163737.jpg)
Nevertheless it's a solid made tool
-
Don't get it...why aren't the images showing??? I did it with the [ img ] thingy
edit: fixed forgot to use the jpg extension
-
No pics at the mo but I've ended up with a standard model Skeletool and a Style CS, got from members here, thanks chaps :tu: for a friend but they don't want them now, still their loss :D
-
Not very cheap but i found a pst at a second shop and I love it . Simple,light and square. :)
-
My latest addition to my Leatherman collection is my Camo Fuse. I found it on ebay and couldn't resist. Seemed like a pretty good price for $39 (shipping included). It came with a made in China nylon pouch that I will probably replace with a leather pouch when I get the chance.
-
I bought a Leatherman Squirt P4 a few weeks back and I immediately fell in love. I've used it a dozen times (at least) already, and it goes with me everywhere. I can't believe I waited this long to buy one. After handling the newer Squirt series, I have to say that I prefer the scales on the older ones and wish they hadn't been retired so soon. In fact, I went ahead and bought a second P4 just to make sure I've got a back-up for years to come. My wife likes it too, so now I'm on the prowl for a third so she has one for her purse!
-
The P4 was a great tool, such a shame they retired it.
-
Sideclip!
Jeff
-
Sideclip but tool ever imho
Sent from Ash forum mobile
-
I bought a Squirt PS4 about a week ago. It has gone with me everywhere, great little tool.
PS I bought the black one
I bought the Squirt P4 today (Blue).
I had a choice between the P4 and the PS4, so I chose the P4 because of the little awl.
I am EDC it no as a supplement to my ST300. Nice little tool.
-
I bought the Squirt P4 today (Blue).
I had a choice between the P4 and the PS4, so I chose the P4 because of the little awl.
I am EDC it no as a supplement to my ST300. Nice little tool.
After handling the PS4 scales, I much prefer those on the P4. Somehow, the PS4 feels "powdery" and kinda makes my skin crawl a bit.
-
I got this LM XE6 :tu:
(http://farm8.staticflickr.com/7280/7009546827_978f2b9ca2_b.jpg)
As much as I like it, I prefer the LM KF4, so this may end up with my partner as she saw it and said it was pretty :D
-
I got two more in the mail today - my Wingman and Sidekick. The Wingman came in a gift tin without a sheath, and the Sidekick came with a caribiner and some sort of leather bag/pouch.
Here is the Sidekick...
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/Sidekick23.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/Sidekick1.jpg)
and here is the Wingman...
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/Wingman1.jpg)
-
I bought the Squirt P4 today (Blue).
I had a choice between the P4 and the PS4, so I chose the P4 because of the little awl.
I am EDC it no as a supplement to my ST300. Nice little tool.
After handling the PS4 scales, I much prefer those on the P4. Somehow, the PS4 feels "powdery" and kinda makes my skin crawl a bit.
Agreed, the old smooth scales definitely felt better IMO. Happily the 'powdery' feel of the PS4 scales is toned down after it's been bashed around on your keys for a little while. :)
-
I bought the Squirt P4 today (Blue).
I had a choice between the P4 and the PS4, so I chose the P4 because of the little awl.
I am EDC it no as a supplement to my ST300. Nice little tool.
After handling the PS4 scales, I much prefer those on the P4. Somehow, the PS4 feels "powdery" and kinda makes my skin crawl a bit.
I agree with you. Just a pity that Leatherman does not make it with stainless steel scales.
-
I bought the Squirt P4 today (Blue).
I had a choice between the P4 and the PS4, so I chose the P4 because of the little awl.
I am EDC it no as a supplement to my ST300. Nice little tool.
After handling the PS4 scales, I much prefer those on the P4. Somehow, the PS4 feels "powdery" and kinda makes my skin crawl a bit.
I agree with you. Just a pity that Leatherman does not make it with stainless steel scales.
Ah, that would be awesome.
-
Well i bought the Freestyle and the Style CS in a clampack the other day for a reasonable price. Very nice but I´m beginning to see a problem here. At first I have the same MT for like 20 years and then suddenly I bought the Wave, Style, Wingman, PST and now these two.
Hmmm...
-
A stainless ps4 might tempt me, but i sure don't like the powder coating they have now.
-
Just got the BCA Pink Style, BCA Pink Style CS, BCA Pink Micra and BCA Pink Micra with Gift Tin. All of them are marked with the BCA ribbon. Really neat.
Cheers - Joe
-
Just bought a brand new minitool complete with box etc!
-
Just bought a brand new minitool complete with box etc!
I would love one of those... :drool:
I think it´s one of the most estetically pleasing models.
To bad i didn´t buy any when they were available.
-
Just bought a brand new minitool complete with box etc!
We need pics :pok:
-
My latest LM is the juice Xe6, many tool and good knife but some little problem, mainly related with wood saw, to take out first you need to take one the reamer, also its a little difficult to take out and also hit reamer base if no close properly, No big deal but I believe LM should improve those points...
And others that are tempting me are the Sidekick, skeletool.
-
Squirt ES4 should arrive on friday.
Also I'm hoping that a certain shop doesn't notice a rather big oopsie with their price for Skeletool. Almost 50% off the average price, shipping is included. Ordered one on the spot and now its a game of wait and see if I get it.
-
Latest i received are the Wingman and Sidekick, although I have ordered a wave and a kick so hope they are here soon.
-
Just got a black oxide Super Tool 300.
Scott
-
Just got a black oxide Super Tool 300.
Scott
Nice!
-
Also I'm hoping that a certain shop doesn't notice a rather big oopsie with their price for Skeletool. Almost 50% off the average price, shipping is included. Ordered one on the spot and now its a game of wait and see if I get it.
Skeletool was shipped. 55 euros total. Welp.
-
Got a Black Oxide Wave a couple of months ago. A Juice S2 about a week and a half ago... which may get sent in for warranty work... I'm breaking fingernails trying to get the slot screw drivers out... and stabbing fingers when I finally do!
First post :D
-
Here is my latest Leatherman, and probably not my last:
(http://i848.photobucket.com/albums/ab45/cbowt1127/knives/P3290002-001.jpg)
-
My new ones are a JuiceS2 and a Style PS
-
My Kick came in the mail yesterday. It came with the black leather case with the snap closure, which I really like. I'm going to take some family photos with all my new additions - I think I have about 6 or 7 new Leathermans since the last family photo.
-
Just got a Wave on a trade today.
Also, there was a Micra with it as an incredibly generous 'extra'.
-
I got a Black Oxide Kick, with bit kit and Mollie sheath..
-
Surge CAMO, suprisingly i can get it from local shop here in BND ;)
-
I was at an antique store and found a Kf4 today. It is in somewhat rough condition, but for $15 I couldn't pass on it.
-
Got a sideclip for about $19 on Friday. It's in very nice shape other than the blade which should be fixable.
-
Got a sideclip for about $19 on Friday. It's in very nice shape other than the blade which should be fixable.
Good buy!
-
These:
(http://www.killedaway.com/images/newleathermantn.jpg) (http://www.killedaway.com/images/newleatherman.jpg)
-
at first glance I thought they were all BO. :o Cool pic mate. 8)
-
at first glance I thought they were all BO. :o Cool pic mate. 8)
Thanks! Yeah, lighting's bad right now since it's overcast. The sun's just now starting to peek through the clouds.
Here's a better one:
(http://www.killedaway.com/images/newleatherman00tn.jpg) (http://www.killedaway.com/images/newleatherman00.jpg)
And that Squirt P4 marks my third. I bought a second as a backup, but my wife took it, so I had to buy another. What's funny is that all three are different colors (not just shades). Two are purplish-grey, and the third is more of a dark, pewter/bluish grey:
(http://www.killedaway.com/images/squirtstn.jpg) (http://www.killedaway.com/images/squirts.jpg)
-
at first glance I thought they were all BO. :o Cool pic mate. 8)
Me too, I got all excited!
-
Just got a gently used charge TTI for $50. Very nice tool, but after carrying it around for a day, I'm realizing how much elegance there is in the engineering of my skeletool.
Skeletool = less is more
Charge TTI = more is more :D
-
Just got a well-loved PST and a virtually new Squirt S4, seen here with a Gerber MP400...
(http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1231.jpg)
-
Nice pickups!
-
I finally got some pictures of the Charge TTI I managed to get for $50, quite the deal:
(http://i.imgur.com/cvdFO.jpg)
(http://i.imgur.com/c4aUH.jpg)
-
skeletool in the mail. I bought the wingman about 2 months ago. Its proved useful and the pocket clip is a plus.The strait drivers could have been ground off better.
-
This arrived in the mail today from Ashley....
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/PST1.jpg)
PST dated 0204/0304. Used in very good shape, a nice addition to that thing that begins with "C" that I swear I don't have..... ;)
-
finally scored a TTI, the blade is gritty anf opens rough and grindy. The serrated is smooth as silk, though.
Whats the deal with leatherman and S30V? I have noticed that the blad grinds, and sharpened edges are all funky. Not just mine but several, ive seen.
internal tools are tight as well.
Oh and my saw is tapered, and thinner at the top, than at the teeth, is this a new design or arth they cheaping out like thye seem to have done with smaller scissor thumb pads?
-
finally scored a TTI, the blade is gritty anf opens rough and grindy. The serrated is smooth as silk, though.
Whats the deal with leatherman and S30V? I have noticed that the blad grinds, and sharpened edges are all funky. Not just mine but several, ive seen.
internal tools are tight as well.
Oh and my saw is tapered, and thinner at the top, than at the teeth, is this a new design or arth they cheaping out like thye seem to have done with smaller scissor thumb pads?
Nope, they will have always been like that. The teeth have to be wider than the steel behind them of else the saw will bind sawing wood.
-
Blast with leather pouch. Decent price < $25
-
finally scored a TTI, the blade is gritty anf opens rough and grindy. The serrated is smooth as silk, though.
Whats the deal with leatherman and S30V? I have noticed that the blad grinds, and sharpened edges are all funky. Not just mine but several, ive seen.
internal tools are tight as well.
Oh and my saw is tapered, and thinner at the top, than at the teeth, is this a new design or arth they cheaping out like thye seem to have done with smaller scissor thumb pads?
Nope, they will have always been like that. The teeth have to be wider than the steel behind them of else the saw will bind sawing wood.
It's the same for the saw on my Victorinox Rucksack when I measured it with my digital caliper. If anything, I wish the taper was even more so it would get stuck even less.
-
:mail:The Skeletool came two days early :tu: I wont go on about it cause i posted sort of a review in the skeletool owners club thread. its cool but i think its been knocked around at the factory cause of a the small knicks and scrapes on it. :facepalm: Picard is not pleased. Anyway the skeletool is a nice addition.
-
I took the headstaggers and bought a Juice KF4,and man is it brilliant!
(http://i782.photobucket.com/albums/yy104/kirk130013/DSCF1642.jpg)
(http://i782.photobucket.com/albums/yy104/kirk130013/DSCF1643.jpg)
(http://i782.photobucket.com/albums/yy104/kirk130013/DSCF1644.jpg)
(http://i782.photobucket.com/albums/yy104/kirk130013/DSCF1646.jpg)
This little guy is getting a hellofalot of pocket time
-
Just got my first multitool a few days ago, and it is a leatherman wave. Feels like a real quality tool, and every feature I've used so far has worked flawlessly.
-
My Latest and first Leatherman is TTi
Really nice Tool, before I am using Victorinox Swisstool Spirit S black, but TTi is much more better than Spirit...
-
Received my storm grey kf4 today, looks like its never been used :multi:
-
Just got in a Leatherman MUT EOD. Not sure exactly why, as I have no need for gun maintenance nor explosive demo, but I had some things laying around that the guy wanted, so... ;D
-
Leatherman Crater folding knife. Picked it up at HD for $20 Cdn. I like the carabiner and bottle opener they put on the end. Really innovative to make you push it in to retract. Leatherman is a great company, its good to see them branching out as the multitool market is pretty saturated and they probably own most of it.
But the MT market isn't dead either. Would love to see a suptertool 300 mated with a Crunch for their next trick. Would be wicked to have vise group like ST300 jaws with removable cutters. Would buy that one in a second.
-
I found this very nice Kick today second hand. I must say I never liked the models with plastic in the handles but I never actually held one before neither.
It´s much better than I thought and the scredrivers I really do like.
Even though it feels a bit empty with only two tools on one of the sides.
-
Fuse :tu:
(http://img685.imageshack.us/img685/2746/leathermanfuse.jpg)
-
Maybe later this week, my latest Leatherman will be a Rebar. :drool:
-
Style and Micro Lenser V9 package.
I also took a picture of the Style with some friends, I never took a picture off.
-
Camo Fuse on clearance.
-
I just got my new Leatherman Tactical Utility MUT...this multitool rocks!...
-
Tomorrow I'll have a brand new Rebar, and tuesday or wednesday I will have a very nice Original model wave.
-
Hi,
Latest Leatherman (until tomorrow) are blue, green and red Style CS's. They are really very nice.
Cheers - Joe
-
Yesterday I got a Juice S2. My third Leatherman, so far.
-
The S2 is a fantastic tool! :multi:
-
These are my latest:
(http://www.killedaway.com/images/squirtstsheath.jpg)
Anyone know what the sheath is from? I bought it by itself.
-
That sheath came with the Freestyle back when it was in production.
BTW, I would gladly trade you something for that Supertool, pm me if you're interested.
-
yeah, it came with a Freestyle and a Monarch 300 torch. :)
-
yeah, it came with a Freestyle and a Monarch 300 torch. :)
There was also a limited Cosco Christmas run of those sheaths with a Core and Monarch 300. I contacted Leatherman one time and tried to get one, but she said that they were only made to order for the combo packs and they did not have them :cry:
But you can still find the Freestyle / Monarch 300 combos on eBay from time to time :tu:
-
Thanks for the info folks! I fired off a few image searches with no results, but once I entered "Leatherman Freestyle sheath" I found exactly one photo of it. I knew you all would know! ;)
Mercury, she's not in the greatest of condition, but I'll PM you and see what you think.
-
My latest Leatherman is a Crunch. It is supposed to be delivered between 5/11/2012 and 5/14/2012.
I also ordered a Craftsman tool box that is 26" wide 6 drawer heavy duty top chest. It has drawers that are small in height so I can use it to store my MT collection and my Schrade knife collection.
-
You are gonna love that Crunch Hammer! Great tool, very useful to have either as a backup on your belt or in your bag.
-
My latest is the Rebar. Should be here on 5-10 can't wait.
-
After losing my Skeletool at work, I decided to upgrade to the CX. It's good, but I don't know if it's really worth the extra money.
-
Just received my Skeletool. A bit disappointed with how functional it is, not much lighter than my Blast with a smaller blade and pliers and yet it costs more. Ergonomics are excellent though and as I got it mainly for the collection I'm starting, it is a pretty cool addition.
-
When I thought of the skeletool as a multitool, I was disappointed, when I started using it as a pocket knife replacement, I found it's niche.
-
Agreed, I was just beginning to notice that. The blade isn't a huge priority with my requirements but I can see why it would be a good replacement for a pocket knife.
-
My latest is the Rebar. Should be here on 5-10 can't wait.
My Rebar has arrived. Oh happy day.
-
I picked up a used TTi in awesome condition today, it's my first titanium charge ever, and I must say I'm really happy with it!
-
I picked up a used TTi in awesome condition today, it's my first titanium charge ever, and I must say I'm really happy with it!
:tu: :drool:
-
Been using the Charge AL lately, and decided that it was worthy of a back-up. They look nice together :D
-
Been using the Charge AL lately, and decided that it was worthy of a back-up. They look nice together :D
Gotta hankerin for some doublemint gum?
-
My Crunch arrived today via US Mail :mail:, and I just ordered a Rebar with a delivery date of 5/17. My Craftsman toolbox should be here any day now. The master plan is all coming together...:gimme:
-
I have had a number of smaller LMs arrive + a Hybrid(a user ::) :D) in the last couple of months. These 4 beauties have arrived in the last week or so :D
(http://i291.photobucket.com/albums/ll287/multimat426/cap%20crimpers/Untitled.jpg)
-
Open them up you big tease! :pok:
-
Open them up you big tease! :pok:
Buy me a drink & turn the lighting down first :pok: :P :D :D
-
This one is a bit rare ;) :D :D
(http://i291.photobucket.com/albums/ll287/multimat426/2HO%20Leatherman/Untitled.jpg)
-
I know I know!!!!!! :gimme: :gimme:
-
This one is a bit rare ;) :D :D
[I M G]h t t p://i291.photobucket.com/albums/ll287/multimat426/2HOLeatherman/Untitled.jpg
Well putting it in the 2HOLeatherman folder is kind of a clue. :pok: :D
Now, where are the pics? :ahhh
Edit: never mind, found them in the 2HO thread :D
-
My Flair arrived. :D
(http://dl.dropbox.com/u/7765163/FlairNFam.jpg)
-
I just received a Camo Fuse in a trade and its going to be a user. :tu:
-
Amici,
I just purchased a Leatherman Style PS with the intent of trying out a little ultralight EDC along with an Alan Folts made Folts Minimalist tanto in a neck configuration.
Cheers,
Serge
-
I just replaced my 6 year old Charge Ti with a Charge TTi.
-
I just won a Brand new Pulse on Ebay, in a gift tin with nylon sheath. My favorite LM by far, now I have to figure out where I'm going to get the money to cover it on my bill me later account.
-
I just won a Brand new Pulse on Ebay, in a gift tin with nylon sheath. My favorite LM by far, now I have to figure out where I'm going to get the money to cover it on my bill me later account.
congratulations on finding another one mate. :cheers: Now, where are you going to tell your wife it came from? :pok:
:D
-
I just won a Brand new Pulse on Ebay, in a gift tin with nylon sheath. My favorite LM by far, now I have to figure out where I'm going to get the money to cover it on my bill me later account.
congratulations on finding another one mate. :cheers: Now, where are you going to tell your wife it came from? :pok:
:D
I'm not sure I'm gonna tell her yet. I might just let her think I didn't sell the first one. :D
-
I just won a Brand new Pulse on Ebay, in a gift tin with nylon sheath. My favorite LM by far, now I have to figure out where I'm going to get the money to cover it on my bill me later account.
congratulations on finding another one mate. :cheers: Now, where are you going to tell your wife it came from? :pok:
:D
I'm not sure I'm gonna tell her yet. I might just let her think I didn't sell the first one. :D
getting it sent to work eh? Avoids many unnecessary explanations. :angel:
-
I just won a Brand new Pulse on Ebay, in a gift tin with nylon sheath. My favorite LM by far, now I have to figure out where I'm going to get the money to cover it on my bill me later account.
congratulations on finding another one mate. :cheers: Now, where are you going to tell your wife it came from? :pok:
:D
I'm not sure I'm gonna tell her yet. I might just let her think I didn't sell the first one. :D
getting it sent to work eh? Avoids many unnecessary explanations. :angel:
I should have done that, yes. :facepalm:
Man I'm an idiot! I guess I'll just have to hope I beat her to the post box.
-
I just won a Brand new Pulse on Ebay, in a gift tin with nylon sheath. My favorite LM by far, now I have to figure out where I'm going to get the money to cover it on my bill me later account.
congratulations on finding another one mate. :cheers: Now, where are you going to tell your wife it came from? :pok:
:D
I'm not sure I'm gonna tell her yet. I might just let her think I didn't sell the first one. :D
getting it sent to work eh? Avoids many unnecessary explanations. :angel:
I should have done that, yes. :facepalm:
Man I'm an idiot! I guess I'll just have to hope I beat her to the post box.
an amateur mistake. :doh:
;)
-
:facepalm:
-
Yep, schoolboy error.... keep practising, you'll get it right :D
-
Yep, schoolboy error.... keep practising, you'll get it right :D
:tu:
-
Or your wife starts lurking here. :D
-
She can barely remember how to check her email. For someone who is sooo brilliant(she knows every bone and ligament in your body, it's her job) she is really computer illiterate.
-
Amici,
Another Juice S2 arrived today Orange, and a Style PS is on the way!
As for the Juice, the logo appears to be different than the older versions I have in an S2 and C2.
Cheers,
Serge
-
Hi Serge,
Yes, Leatherman has redone the logo on the Juice line (and on the anodized Micras). I like the new format very much.
Cheers - Joe
-
Really chuffed with my Mini Tool from chrissy :D
-
Really chuffed with my Mini Tool from chrissy :D
They are great little things. Glad you're enjoying yours :cheers:
-
:facepalm:
Has anyone purchased blast black? Would love some feed back. :salute:
-JS
-
:facepalm:
Has anyone purchased the Blast Black,any feed back? :salute:
-JS
-
Amici,
Well the Style PS arrived today and I will add very impressive! This could definitely fit in to an ultralight EDC rig paired up with a suitable fixed or folder of similar weight and size.
Cheers,
Serge
-
I'm rather interested in the Style PS. Let us know how that works for you. Nice looking little tool... that you don't have to donate to the TSA during Air Travel.
-
:facepalm:
Has anyone purchased the Blast Black,any feed back? :salute:
-JS
I have had a BO blast, and I still have my Stainless blast. Awesome tool all around, and the Black one is just :drool: :drool: 8) 8)
-
Now here is a sad story. I bought a nice Fuse for a friend as a gift. When I brought it home, I noticed it had the new pivot tool locks. I thought to myself...self...do I have this one? That was a bad thought as when I looked, I did not have a standard Fuse with the newer locks. Guess I will have to buy him another one at a later date. :-[
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1248small.jpg)
-
Not new but I got back my cerakoted parts for my Destructocon!
(http://www.ericaustudios.com/for_blogs/Desctructocon/DSC_0114.JPG)
(http://www.ericaustudios.com/for_blogs/Desctructocon/DSC_0115.JPG)
(http://www.ericaustudios.com/for_blogs/Desctructocon/DSC_0109.JPG)
-
:drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool:
-
That orange looks good.
-
I got my Rebar in the mail on the 17th! I love it! When it got here it was real tight, so I put a little Rem Oil on the joints and worked them a little and now it feels perfect.
-
LM Kick all the way from Canada,from our own Syph007.Neat little tool,just apity it was always overpriced in the stores.Now do I mod it,or keep it standard....?
-
Picked up another Kick; Home Depot has them on Clearance for under $20 now.
-
Bought a ever-so-slightly-used Wingman off our own dear Lynn LeFey, and while I had fairly low expectations for such an "economy" model, I've actually been quite impressed! The blade is a little thin, but cRaZy sharp (sharpest MT blade outta the box EVAR), and even though I haven't been a fan of flattened Phillips drivers, this one is hella stout and well cut. The wire cutters are a little lame compared to the bigger LMs, but I don't use them all that much. Put my new BBQ grill together with it today, it worked as well as my larger MTs.
I also broke down and ordered a BO Rebar. I've been using a modded Charge Ti in my EDC bag as the core of my EDC toolkit, the Rebar is lighter and has just the tools I want, especially the full-sized square-shank Phillips driver that I put on my Charger, so I can use all the same drivers, extensions and bits.
-
Super-happy that the Wingman's working out for you. Like i said elsewhere, I think I would have loved it if I were right-handed. I was hoping for OHO, and just couldn't easily swap it over to that. Glad it's getting use elsewhere.
I thought the scissors were pretty good, and yeah, it was SHARP. For it's price-point, I think it's a good tool... for righties. (stupid everything made for right-handed people!) :D
-
For it's price-point, I think it's a good tool... for righties.
Yeah, it is. I initially dismissed it as a cheap-ass budget-priced tool, but it's actually a keeper. Thanks again!
-
For it's price-point, I think it's a good tool... for righties.
Yeah, it is. I initially dismissed it as a cheap-ass budget-priced tool, but it's actually a keeper. Thanks again!
I think it's a cheap-ass budget-priced tool.
:D
Picked up another Kick; Home Depot has them on Clearance for under $20 now.
I'm gonna have to head down there, that's a heck of a price.
-
I'm gonna have to head down there, that's a heck of a price.
I know; I already had two, but I had to snag another one. I was back there yesterday for some random hardware and had to stop myself getting yet another. :twak:
-
Picked up another Kick; Home Depot has them on Clearance for under $20 now.
Dang. Are those still available for nothing and how much would shipping to finland cost? Kicks go for $55-75 here.
-
Okay... so... a Micra just appeared out of nowhere, it seems.
I have only ever had 2 in my life, as far as I can remember. One I gave to a coworker a few years ago. One I gave to my husband.
And now... one shows up in my tool belt.
So... I guess it gets added as my latest Leatherman.
They're breeding, I tell ya!
-
Dang. Are those still available for nothing and how much would shipping to finland cost? Kicks go for $55-75 here.
They were still around a few days ago when I was there. Even before they went on clearance sale they were $29. Shipping from the US (at least my part of it) looks to be $16.95.
-
I was getting bored with my style CS so I got really adventurous and bough a BLUE style Cs. if only they made one in orange...
-
Dang. Are those still available for nothing and how much would shipping to finland cost? Kicks go for $55-75 here.
They were still around a few days ago when I was there. Even before they went on clearance sale they were $29. Shipping from the US (at least my part of it) looks to be $16.95.
Could you do me a favor? Next time you are near Home Depot, grab one (sheath doesn't matter) even if they are $29 a pop, email me at idioottifiltteri -at- gmaildotcom and I'll paypal you some.
Like I said, Leatherman tools are stupidly expensive in finland.
-
BO PST!
03/94 date stamp, mint!
-
BO PST!
03/94 date stamp, mint!
MINT! Very nice!!
:pok: :pok:
Pics?
-
Leatherman SuperTool 200, at last.
Also shown with the rest of the family for comparison.
The original and the ST200 have the same pliers head and other similarities.
The ST300 is completely redesigned.
-
BO PST!
03/94 date stamp, mint!
Pics?
Here you go Merc :)
In Leatherman Catalog Flying V style
(http://www.ericaustudios.com/for_blogs/BO%20PST%20Small.JPG)
-
In Leatherman Catalog Flying V style
(http://www.ericaustudios.com/for_blogs/BO%20PST%20Small.JPG)
Oooooooh... Aaaaaaaah... :tu:
Pardon my ignorance, but was the PST-II ever made in Black Oxide?
-
A couple of searches says no, but I am not the end all of Leatherman knowledge.
If there was, I'd be first in line!
-
Amici,
I have to say that the Style PS is not a bad little bugger! It's light, and reminds one of a miniature Skeletool without the main blade. It does encompass a small pair of scissors reminiscent of the version found on the PS4 and function ably. The bottle opener works flawlessly, and the file is guess what is really a file and does a good job once utilized in that function.
All in out, the Style PS would make a great secondary to either a fixed or folding blade either used in an EDC situation if such laws allow you, or if you're a "gram weenie" when it comes to the outdoors where every ounce counts, and the need for a full sized MT just isn't an option.
Personally, when on a day hike in the field, I now carry just an original Folts Minimalist along with a PS since where I go, the need for a full sized MT isn't necessary. Let me also conclude mentioning that the Style PS is TSA approved, so no need to worry about yours being confiscated later to turn up on Ebay as part of a TSA goods auction.
Cheers,
Serge
-
Looks like I've got a Juice S2 on the way, which will be my first Juice.
-
BO PST!
03/94 date stamp, mint!
Pics?
Here you go Merc :)
In Leatherman Catalog Flying V style
(http://www.ericaustudios.com/for_blogs/BO%20PST%20Small.JPG)
:drool:
What is it about BO that makes is sooooo 8) ?
I would love a BO charge.
-
Rebar on the way :)
-
What is it about BO that makes is sooooo 8) ?
I would love a BO charge.
I still go back to my BO Wave every time, despite owning several TTis. I started a thread over in the Mod Squad about my pursuit of the Ultimate BO Wave (The Black Tide). Upgraded 154cm BO Blade, Guthook SE...
http://forum.multitool.org/index.php/topic,37770.msg607204.html#new (http://forum.multitool.org/index.php/topic,37770.msg607204.html#new)
(http://www.ericaustudios.com/for_blogs/Black%20Tide/BlackTideStage1LR.jpg)
-
Just your plain Wave from Home Depot.
-
Just your plain Wave from Home Depot.
nothing wrong with that. :tu:
-
Just your plain Wave from Home Depot.
nothing wrong with that. :tu:
Agreed, nothing wrong with that at all!
-
I try and pick up extra waves every time. If they are they right price :)
BO waves in a heart beat. I
-
Rebar came in this morning.
-
I just got a PST 2! :drool:
-
What is it about BO that makes is sooooo 8) ?
I would love a BO charge.
I still go back to my BO Wave every time, despite owning several TTis. I started a thread over in the Mod Squad about my pursuit of the Ultimate BO Wave (The Black Tide). Upgraded 154cm BO Blade, Guthook SE...
http://forum.multitool.org/index.php/topic,37770.msg607204.html#new (http://forum.multitool.org/index.php/topic,37770.msg607204.html#new)
(http://www.ericaustudios.com/for_blogs/Black%20Tide/BlackTideStage1LR.jpg)
That is 8) 8) 8)
Have you found that you use the cap crimper much?
-
What is it about BO that makes is sooooo 8) ?
I would love a BO charge.
I still go back to my BO Wave every time, despite owning several TTis. I started a thread over in the Mod Squad about my pursuit of the Ultimate BO Wave (The Black Tide). Upgraded 154cm BO Blade, Guthook SE...
http://forum.multitool.org/index.php/topic,37770.msg607204.html#new (http://forum.multitool.org/index.php/topic,37770.msg607204.html#new)
(http://www.ericaustudios.com/for_blogs/Black%20Tide/BlackTideStage1LR.jpg)
That is 8) 8) 8)
Have you found that you use the cap crimper much?
Yup! Most times I am holding on to some kind of thick wire, a handle or something with them. I find them more useful than not useful so I am happy with their placement.
Also..as previously discussed, they make great Leatherman knurled screw removers.
-
In the mail today came my Juice S2, and I ordered the Charge AL and the Charge ALX. Once the Charges come in, all I will need to have 1 each of Leatherman's current line will be the Juice Cs4 and the Juice Xe6. Most if my MT's are SS, so I guess I'll start on the BO's next.
-
What is it about BO that makes is sooooo 8) ?
I would love a BO charge.
I still go back to my BO Wave every time, despite owning several TTis. I started a thread over in the Mod Squad about my pursuit of the Ultimate BO Wave (The Black Tide). Upgraded 154cm BO Blade, Guthook SE...
http://forum.multitool.org/index.php/topic,37770.msg607204.html#new (http://forum.multitool.org/index.php/topic,37770.msg607204.html#new)
(http://www.ericaustudios.com/for_blogs/Black%20Tide/BlackTideStage1LR.jpg)
That is 8) 8) 8)
Have you found that you use the cap crimper much?
Yup! Most times I am holding on to some kind of thick wire, a handle or something with them. I find them more useful than not useful so I am happy with their placement.
Also..as previously discussed, they make great Leatherman knurled screw removers.
I was just working on a project tonight and used the ridge between the crimper and the regular pliers. I was splicing a new headphone jack on my FM transmitter for my truck, and I used that ridge to crimp the tiny splices. Fantastic.
-
Just received a Leatherman Wave from Mercury. First time I've held one in the hand actually, and like it so far.
-
Glad it arrived safe!! Boy it takes a while to get to Singapore from the US!!
-
New in clamshell BO Core.
Such a beaut!
-
I just got a used Leatherman Juice S2, in Flame Orange.
-
A brand new Leatherman Surge, and a used, in mint condition Leatherman PST2. :D
More to come soon...
-
A BO ST200, BO Rebar and my newly minted Black Tide (that counts right...it's new again!)
(http://www.ericaustudios.com/for_blogs/BO%20Brothers/DSC_0116.JPG)
(http://www.ericaustudios.com/for_blogs/BO%20Brothers/DSC_0117.JPG)
(http://www.ericaustudios.com/for_blogs/BO%20Brothers/DSC_0119.JPG)
I noticed something funny, after transplanting the Rebar head to the wave, it increased it's jaw capacity but just a fraction 1/16..it might be that the Rebar is completely unused.
(http://www.ericaustudios.com/for_blogs/BO%20Brothers/DSC_0120.JPG)
-
A BO ST200, BO Rebar and my newly minted Black Tide (that counts right...it's new again!)
(http://www.ericaustudios.com/for_blogs/BO%20Brothers/DSC_0116.JPG)
(http://www.ericaustudios.com/for_blogs/BO%20Brothers/DSC_0117.JPG)
(http://www.ericaustudios.com/for_blogs/BO%20Brothers/DSC_0119.JPG)
I noticed something funny, after transplanting the Rebar head to the wave, it increased it's jaw capacity but just a fraction 1/16..it might be that the Rebar is completely unused.
(http://www.ericaustudios.com/for_blogs/BO%20Brothers/DSC_0120.JPG)
They look great in sets of three or more,nice picture. :cheers:
-JS
-
To complete my collection in which I will have one ea. of all of the current line of Leatherman, I got my Charge Al and my Charge Alx in the mail today.
-
Rebar :)
-
Rebar :)
Shiny.. 8) 8)
-
Im playing with my Supertool 300/Monarch my dad got me for Christmas! :DDDD
Love it, sure you will to^
-Austin
Good luck nice piece enjoy. :tu:
-JS
-
Hello community,
I just received my Rebar a friend send. Might be one of the first in germany, it's yet to be announced on leatherman.de
I've had a classic Supertool with me since 1999, was about time for something new. The rebar looks tiny next to the ST, I'm not sure if it's sturdy enough for my needs. But it's much less of a chunk in my pocket. We'll see how it performs having a hard life on a farm.
edit:
I'm impressed, the wirecutters are sharp enough to cut paper.
-
Welcome to the forum :cheers:
-
Hi there JB.. :tu: Let us know how you get along with your Rebar.. :)
-
Leatherman Wave, Accessory bit kit & LED Lenser P3 promotional pack. Planning to give it to my father as a father's day gift.
(http://i.imgur.com/OvdCC.jpg?1)
-
A neighbour just knocked and handed me a package this morning, had been delivered to the wrong address.
(http://img.tapatalk.com/51b2bbb9-631f-da48.jpg)(http://img.tapatalk.com/51b2bbb9-635a-568a.jpg)(http://img.tapatalk.com/51b2bbb9-637d-4fec.jpg)
The blacking on the main blade is a little thin but on everything else including the serrated blade spot on.
-
:drool: I didn't know they made a fully BO Charge.
-
WANT!!
-
:drool: I didn't know they made a fully BO Charge.
Leatherman Charge ALX BLACK (http://www.leatherman.com/product/Charge_ALX_Black)
-
Nice :D :D :D
... which leaves my latest LM greatly overshadowed. A Style PS :whistle:
-
Nice :D :D :D
... which leaves my latest LM greatly overshadowed. A Style PS :whistle:
A new tool is a new tool, right. And one more struck off the never ending list that once completed will result in enlightenment. Right.
:rofl:
-
The Blast And kick are the new additions,love the blast hate the kick. The Kick was pure impulse buy at The local Target.Maybe the last kick to be sold at that target. My issue with the Kick is that its tools are super stiff and grind when opened. Almost feels like sand in the piviot for the tools. Warranty issue maybe? The all leather Sheaths suck to the max. Not pleased with them at all. Stiff and cheap. Fuse is next to round off the collection of the soon to be retired LM MT's
-
My two newest Leatherman are the Juice Cs4 and the Juice Xe6. Man, that Xe6 is a beast! I didn't expect it to be as heavy duty as it is.
-
BO super tool!!
(http://img.tapatalk.com/4ac696d0-7ae9-7d3f.jpg)
-
Nice.
I got my BO Wave in today, ordered it last week as I need to send my Charge in for warranty and didn't want to be without an OHO tool in the interim. It's safe to say that I have converted to this format, I love these tools!
-
Nice.
I got my BO Wave in today, ordered it last week as I need to send my Charge in for warranty and didn't want to be without an OHO tool in the interim. It's safe to say that I have converted to this format, I love these tools!
I know right?
I am just collecting BO tools :)
I am in love with my Black Tide.
-
I've got a LM Blast black oxide finish.
-
Dude I work around found a gem at the laundry mat the other day. A well worn PST Marlboro Country points Leatherman tool,with the sheath. He really dosent know what he has. Hes the kind of dude that thinks Husky tools are as good as Snap-On tools. Anyway good for him on the find and sorry for the loss of the person who used to own it.I would take a day off to look for the lost tool and mourn it. Handles were stamped in june of 94.The pics suck with the crappy lighting.Enjoy
-
Nice.
I got my BO Wave in today, ordered it last week as I need to send my Charge in for warranty and didn't want to be without an OHO tool in the interim. It's safe to say that I have converted to this format, I love these tools!
I know right?
I am just collecting BO tools :)
I am in love with my Black Tide.
My BO wave is even cooler than I thought it would be. I look forward to putting battle scars on it, I love a good worn BO look.
I have gotten tons of compliments on it, and I'm really glad i got it because I needed the serrated blade and bit driver last night. My blast wouldn't have done the job. Rebar would have, but I did need the OHO blade so it would have been harder.
-
Nice.
I got my BO Wave in today, ordered it last week as I need to send my Charge in for warranty and didn't want to be without an OHO tool in the interim. It's safe to say that I have converted to this format, I love these tools!
I know right?
I am just collecting BO tools :)
I am in love with my Black Tide.
My BO wave is even cooler than I thought it would be. I look forward to putting battle scars on it, I love a good worn BO look.
I have gotten tons of compliments on it, and I'm really glad i got it because I needed the serrated blade and bit driver last night. My blast wouldn't have done the job. Rebar would have, but I did need the OHO blade so it would have been harder.
Such an awesome tool, aftering using it for long, any of the Charges feel like marshmallows becuase of the extra thickness. I know its not much.
Keep and eye open for a bum BO ALX on eBay, that's how I outfitted my Black Tide with the second bit driver, 154cm blade and gut hook SE.
-
Hi there JB.. :tu: Let us know how you get along with your Rebar.. :)
Well, after a few days some second thoughts on the Rebar.
-It's small and light, really feels nice in my pocket.
-for it's over all size the plier head is huge and very strong
-The blades and drivers are very delicate compared to the ST300 my kollegues carry. Usually I use the leatherman for a first repair attempt and if that's not going to work I'd fetch some dedicated tools. A Hazet screwdriver for example is a different kind of tool. But I'm a bit afraid I'd still manage to break something cause I'm used to the much stronger ST classic.
- Does leatherman employ trained monkeys to operate the grinding machine? Mine came with a jagged, uneven ground straight blade. Not very sharp in the front either. Took a while to fix that with my spyderco sharpmaker. The serrated blade on the other hand is perfectly ground.
-
Hi there JB.. :tu: Let us know how you get along with your Rebar.. :)
Well, after a few days some second thoughts on the Rebar.
-It's small and light, really feels nice in my pocket.
-for it's over all size the plier head is huge and very strong
-The blades and drivers are very delicate compared to the ST300 my kollegues carry. Usually I use the leatherman for a first repair attempt and if that's not going to work I'd fetch some dedicated tools. A Hazet screwdriver for example is a different kind of tool. But I'm a bit afraid I'd still manage to break something cause I'm used to the much stronger ST classic.
- Does leatherman employ trained monkeys to operate the grinding machine? Mine came with a jagged, uneven ground straight blade. Not very sharp in the front either. Took a while to fix that with my spyderco sharpmaker. The serrated blade on the other hand is perfectly ground.
My Wave suffered from the same problem, the main blade had a really uneven grind (which I have long since fixed), but the serrated blade was immaculate out of the box. Now I just have to learn how to sharpen a serrated blade!
-
My latest, Leatherman Charge TTI with S30V blade. :)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/3572fbbd.jpg)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/a06c8ed5.jpg)
-
My latest, Leatherman Charge TTI with S30V blade. :)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/3572fbbd.jpg)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/a06c8ed5.jpg)
:tu: nice!
-
- Does leatherman employ trained monkeys to operate the grinding machine? Mine came with a jagged, uneven ground straight blade. Not very sharp in the front either. Took a while to fix that with my spyderco sharpmaker. The serrated blade on the other hand is perfectly ground.
My Wave suffered from the same problem, the main blade had a really uneven grind (which I have long since fixed), but the serrated blade was immaculate out of the box. Now I just have to learn how to sharpen a serrated blade!
Huh, I must've gotten lucky in the Straight Blade Lottery. Mine was properly ground, and in fact, it's one of the sharpest out-of-the-box I recall getting on a Leatherman. Most have needed at least a little touch-up to get as sharp as I like.
-
Hi there JB.. :tu: Let us know how you get along with your Rebar.. :)
Well, after a few days some second thoughts on the Rebar.
-It's small and light, really feels nice in my pocket.
-for it's over all size the plier head is huge and very strong
-The blades and drivers are very delicate compared to the ST300 my kollegues carry. Usually I use the leatherman for a first repair attempt and if that's not going to work I'd fetch some dedicated tools. A Hazet screwdriver for example is a different kind of tool. But I'm a bit afraid I'd still manage to break something cause I'm used to the much stronger ST classic.
- Does leatherman employ trained monkeys to operate the grinding machine? Mine came with a jagged, uneven ground straight blade. Not very sharp in the front either. Took a while to fix that with my spyderco sharpmaker. The serrated blade on the other hand is perfectly ground.
I agree about the blade thickness. The drivers (except the phillips, it rocks) are a bit on the wee side and the blades themselves are just too thin for me. I still love the tool and it is a rock solid backup for me. I actually still use it all the time because of it's awl and completely kick a$$ pliers and cutters.
Nice.
I got my BO Wave in today, ordered it last week as I need to send my Charge in for warranty and didn't want to be without an OHO tool in the interim. It's safe to say that I have converted to this format, I love these tools!
I know right?
I am just collecting BO tools :)
I am in love with my Black Tide.
My BO wave is even cooler than I thought it would be. I look forward to putting battle scars on it, I love a good worn BO look.
I have gotten tons of compliments on it, and I'm really glad i got it because I needed the serrated blade and bit driver last night. My blast wouldn't have done the job. Rebar would have, but I did need the OHO blade so it would have been harder.
Such an awesome tool, aftering using it for long, any of the Charges feel like marshmallows becuase of the extra thickness. I know its not much.
Keep and eye open for a bum BO ALX on eBay, that's how I outfitted my Black Tide with the second bit driver, 154cm blade and gut hook SE.
I do like how slim it is, and I just love the BO. I call it my Stealth Leatherman, and my boss just laughs. I used the hell out of it last night.
-
My Leatherman Juice S2 Flaming Orange. 8)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/1a3ed243.jpg)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/05a3f734.jpg)
-
Nice one.. 8)
Sent from my iPhone using Tapatalk
-
My Leatherman Juice S2 Flaming Orange. 8)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/1a3ed243.jpg)
WHOA!! :o
Hang on, let me turn the brightness down on my monitor...
Ah, yes, gorgeous tool!! 8)
-
Leatherman BO Wave, got it to hold me over while I send my Charge TTi in for warranty.
-
Skeletool :multi:
-
My latest Leatherman is a Rebar BO, a big thank to Travis
-
FINALLY! my quest for a Leatherman Flair came to an end...
VERY happy with it, it'll get a lot of use this BBQ season.
(http://farm8.staticflickr.com/7094/7362871018_c6115a37db_z.jpg)
-
FINALLY! my quest for a Leatherman Flair came to an end...
VERY happy with it, it'll get a lot of use this BBQ season.
(http://farm8.staticflickr.com/7094/7362871018_c6115a37db_z.jpg)
Very nice! I plan on buying one someday for that exact purpose.
-
Sharps sale at the state shop! I had a Leatherman Mini follow me home. Nice a tight, no slop, blade had some use and some staining on the pliers, but mostly it looks like it was carried a lot and used a little.
Certainly doesn't feel as solid as PSTs, Supertool or Rebar, but for not much bigger than a Squirt, this thing takes the Squirt's lunch money and stuffs it in a locker. I'm surprised how comfortable it is to grab with only the first part of the legs opened- this thing has porcupine quill pulling written all over it.
-
FINALLY! my quest for a Leatherman Flair came to an end...
VERY happy with it, it'll get a lot of use this BBQ season.
(http://farm8.staticflickr.com/7094/7362871018_c6115a37db_z.jpg)
Congratulations, it's a fine multitool :tu: I recently acquired one myself, via eBay, and i gotta tell you...it's one of my favorites :climber: Although it was used, it's near mint condition.!
Enjoy your new Leatherman Flair, it's a great MT.
-
Congratulations, it's a fine multitool :tu: I recently acquired one myself, via eBay, and i gotta tell you...it's one of my favorites :climber: Although it was used, it's near mint condition.!
Enjoy your new Leatherman Flair, it's a great MT.
Oh yes...I can't wait to USE it. I've already paired it up with a Spyderco Rock Lobster and CRKT Eatin Tool. Bring on the BBQ!
(http://farm9.staticflickr.com/8001/7178879041_442ba6ffd8_z.jpg)
-
I have had a BO Rebar on back order since the 4th June. :ahhh. Hopefully not too much longer before it arrives. :mail:.
-
My first two Leathermans. A Wingman I bought at Home Depot last week and a Wave I got in the mail today.
(http://oi50.tinypic.com/9te69k.jpg)
-
Got a cool classic in the mail. Black Oxide PST. Well worn and used,I absolutly love it. the tool is so simple and compact. Its so cool the wife wants one now. Black oxide is a great finish on MT's.Being my first BO MT is might be a first due option from now on with new MT's. Special thanks to Sazabi for the great service. Thanks to him my Personal Survival is stylin and profilin.
-
Got a cool classic in the mail. Black Oxide PST. Well worn and used,I absolutly love it. the tool is so simple and compact. Its so cool the wife wants one now. Black oxide is a great finish on MT's.Being my first BO MT is might be a first due option from now on with new MT's. Special thanks to Sazabi for the great service. Thanks to him my Personal Survival is stylin and profilin.
Very cool mate :tu:. I like Pale Ale , is the Saranac a goodun :think: :think:
-
First Post so i thought i would show off my latest Leatherman, which happens to be a slight mod.
This is a wave with BO handles and silver tools on everything else, the blade is S30V steel from a Charge TTI and also put two bit drivers on it. I plan to sharpen the can opener and make it a "beater" blade.
I am very pleased with this :multi:
(http://img411.imageshack.us/img411/8324/photo0083n.jpg) (http://imageshack.us/photo/my-images/411/photo0083n.jpg/)
(http://img4.imageshack.us/img4/4817/photo0082mp.jpg) (http://imageshack.us/photo/my-images/4/photo0082mp.jpg/)
Sorry about the quality of the camera :whistle:
I plan to put the silver Rebar pliers head on this sometime in the future
-
Cool a Charge ALX that had a collision with a BO Wave :think: :D :D
-
Just scored a nice used Wave on Ebay.
-
Very cool nevark. :tu:
-
Got a cool classic in the mail. Black Oxide PST. Well worn and used,I absolutly love it. the tool is so simple and compact. Its so cool the wife wants one now. Black oxide is a great finish on MT's.Being my first BO MT is might be a first due option from now on with new MT's. Special thanks to Sazabi for the great service. Thanks to him my Personal Survival is stylin and profilin.
Very cool mate :tu:. I like Pale Ale , is the Saranac a goodun :think: :think:
Its the best of the local brews I think. Good body and a nice bite to it. Great with steaks,burgers. Anything from the town of Saranac,NY is worth a try.
-
New and old retirees need to stay regular. CC BO FUSE and a mini tool. Boxed LM's are so much nicer than that clam shell crap you need a K12 saw and jaws of life to open.
The Fuse is gonna be the new edc for a bit. weight and size is great,the tool combo in it fits needs at work well. ST300 is on the shelf. dont wanna tell everyone why cause im gonna hear Rebar alot.
Mini Tool is for the wife. Her first multi and why not a Mini Tool. 10 dolla made me holla. No play in the plier joint,well kept blade,straight driver is fair and the file still has some life to it. The can and bottle openers look like new. No date code on it. Is that normal? The poor Mini is gonna be a Purse Pirate with a pink lanyard :facepalm:but she'll be ready with some edc.
-
So, I had a bunch of change laying around. I'd always hesitated taking the coins to the Coinstar machine at the grocery store, knowing that they take a 10% cut. Then last week I found out that if you choose a giftcard from an affiliate company rather than cash, they do not take their cut; the giftcard is the full amount of your coin deposit. Amazon.com is one of those affiliates.
My new Crunch came today. :drool: :mail:
-
My Pocket clip came today. It sucks. Ive examened the threads on the screw and on the Kick. all is fine there,but alot of play in it. Its not cross threaded and will tourque down fine. it wont stay tight. maybe some thread lock goo will help or a super small split washer.
-
My Pocket clip came today. It sucks. Ive examened the threads on the screw and on the Kick. all is fine there,but alot of play in it. Its not cross threaded and will tourque down fine. it wont stay tight. maybe some thread lock goo will help or a super small split washer.
Here are a couple ideas mate :think:
http://forum.multitool.org/index.php/topic,4958.0.html (http://forum.multitool.org/index.php/topic,4958.0.html)
-
Damascus Wave 600/1000...my Father's day gift to myself...And a brand spanking new Flair, as well as an original BO PST...all brand new...
-
My new Crunch came today. :drool: :mail:
I saw your post elsewhere ab out the blood blister. Other than that, how's the Crunch? I've been eyeballing it. I now have a Spirit X on the way, and the Crunch might be next on my interest list.
-
Just got a LM charge XTi. Very nice tool indeed. Now time to mod.
-
I saw your post elsewhere ab out the blood blister. Other than that, how's the Crunch? I've been eyeballing it. I now have a Spirit X on the way, and the Crunch might be next on my interest list.
It's interesting. The engineering on this thing to make it work is pretty fantastic.
PRO:
It's freakin' Vise Grip-type pliers in a folding multitool
full-size hex driver
It has a knife, screwdrivers, and file.
CON:
It has a knife, screwdrivers, and file that are all on the short side.
I can't see me carrying this as my EDC, but it will probably go live in my work bag for a while.
-
It's interesting. The engineering on this thing to make it work is pretty fantastic.
Oh, agreed. I can only imagine the engineering that went into getting a Vice-Grip™ into that form factor, I'm sure at least a few folks at Leatherman burned some midnight oil and tore out some hair to make that work!
I can't see me carrying this as my EDC, but it will probably go live in my work bag for a while.
Yeah, it's an odd tool that way, neither fish nor fowl. Too specialized for EDC, and if you need that sort of utility enough to pack one in your bag, you could carry a real pair of Vice-Grip pliers instead.
An amazing tool, though, all the same!
-
My Pocket clip came today. It sucks. Ive examened the threads on the screw and on the Kick. all is fine there,but alot of play in it. Its not cross threaded and will tourque down fine. it wont stay tight. maybe some thread lock goo will help or a super small split washer.
Here are a couple ideas mate :think:
http://forum.multitool.org/index.php/topic,4958.0.html (http://forum.multitool.org/index.php/topic,4958.0.html)
Great Detective work Multimat. Plumming department will hear from me tomorrow.
-
My Pocket clip came today. It sucks. Ive examened the threads on the screw and on the Kick. all is fine there,but alot of play in it. Its not cross threaded and will tourque down fine. it wont stay tight. maybe some thread lock goo will help or a super small split washer.
Here are a couple ideas mate :think:
http://forum.multitool.org/index.php/topic,4958.0.html (http://forum.multitool.org/index.php/topic,4958.0.html)
Great Detective work Multimat. Plumming department will hear from me tomorrow.
No worries mate , :D
I like Allan's solution
(https://lh6.googleusercontent.com/-Bg7ZShdyxW4/TjGG5IbsHoI/AAAAAAAAHKk/UUgS7vd-1VQ/s400/DSC08442.JPG)
Damascus Wave 600/1000...my Father's day gift to myself...And a brand spanking new Flair, as well as an original BO PST...all brand new...
Yikes mate what do you get for your birthday :ahhh :ahhh :D :D :D.
3 really nice LMs mate 8) 8) pics :pok: :pok: :pok: :pok: :pok: :D :D
-
Old excellent SuperTool :mail:
(http://img3.imageshack.us/img3/3825/kgrhqvhj0eowq0j9bp1k0yq.jpg)
-
Scored these 3 lately...
-
Scored these 3 lately...
Nice score. :drool:
-
Thats a game 7 stanley cup final hat trick score dude. Nice goin Trinity :drool:
-
Scored these 3 lately...
Trin they are all SUPER cool but I gotta say the Damascus Wave(s) are :drool: :drool: :gimme: :gimme: :dd: :dd:
Mate those 3 are tough ones to land you did very well 8) 8)
(http://forum.multitool.org/index.php?action=dlattach;topic=33794.0;attach=35969;image)
-
Scored these 3 lately...
Trin they are all SUPER cool but I gotta say the Damascus Wave(s) are :drool: :drool: :gimme: :gimme: :dd: :dd:
Mate those 3 are tough ones to land you did very well 8) 8)
(http://forum.multitool.org/index.php?action=dlattach;topic=33794.0;attach=35969;image)
Wow... :o :o :o
-
Just so long as you didn't buy the Flair from MultiMat you'll be fine. :D
Seriously; that's a heck of a cool trio of tools. 8)
-
Just so long as you didn't buy the Flair from MultiMat you'll be fine. :D
Seriously; that's a heck of a cool trio of tools. 8)
I agree with Gareth on both those points! :D
Fabulous score there Trinity. :multi:
-
Got this original Supertool today from Captain Spaulding. It looks like it's hardly been used, if at all! Beautiful shape, dated 0500/0500 .
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF0707.jpg)
I've also got a tool adapter for it on the way......
-
NIB PST from the gun show. :D
-
NIB PST from the gun show. :D
:p pfft lol
-
Just so long as you didn't buy the Flair from MultiMat you'll be fine. :D
Seriously; that's a heck of a cool trio of tools. 8)
I agree with Gareth on both those points! :D
Fabulous score there Trinity. :multi:
Like I would sell my Flair :o :o :ahhh :ahhh :ahhh.
BTW should the sky fall , politicians tell the truth & I sell my Fair.My Fair would fall in the lightly used/inserted :think: :think: category & could be put in the almost new category after a good clean/sterilisation ::) :D :D :D .I think :P :D :D
-
Just so long as you didn't buy the Flair from MultiMat you'll be fine. :D
Seriously; that's a heck of a cool trio of tools. 8)
I agree with Gareth on both those points! :D
Fabulous score there Trinity. :multi:
Like I would sell my Flair :o :o :ahhh :ahhh :ahhh.
BTW should the sky fall , politicians tell the truth & I sell my Fair.My Fair would fall in the lightly used/inserted :think: :think: category & could be put in the almost new category after a good clean/sterilisation ::) :D :D :D .I think :P :D :D
:D :D
-
At last a mint Juice Kf4 from a store in denmark, but sadly not the orignal.
-
I got my Rebar today :drool: Its been a while since I've been this impressed with a multitool.
-
As of 3:30, this is my latest Leatherman, part of a great trade with nelly1974.
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF0712.jpg)
This adapter is in perfect shape, never used. Here it is with my second-latest Leatherman, the Supertool:
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF0715.jpg)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF0713.jpg)
And as a bonus, it works with my Spirit, Swisstool, and MPT too! :tu:
-
A like new SS PST came today. Very impressed with the tool. Date stamped 1197 1197. Every tool is taunt and SHARP. No Play in the piviot and the wire cutters look like they were used maybe twice.Very cheap buy as well. I would call it theft really at 23 bucks.
Its part of a gift for a really good friend who got himself ordained to marry the wife and I. Figured I could bring him to the dark side with a classic LM. Hes a big time early century[20's,30's,40's] tool collector. Never gave MT's a go. Gotta go put this LM back in its package so it dosent fall on my hip.
-
Hi folks, new member here I just ordered my first real multitool at Amazon. It's a Leatherman Charge AL, I was thinking to get the wave, but the price difference is not that much. I hope I made the right choice.
So excited to received the :mail:
-
This is my newest MT.
A Leatherman Surge. Price plus shipping from USA lower then retail price here in Europe. (As long as Costums do not open the package 8) )
With space for a flashlight and sharpie in the sheath.
-
This is my newest MT.
A Leatherman Surge. Price plus shipping from USA lower then retail price here in Europe. (As long as Costums do not open the package 8) )
With space for a flashlight and sharpie in the sheath.
Nice profile pic floberke :tu: Be sure to say hello in the new member thread
-
Already did:
http://forum.multitool.org/index.php/topic,38447.0.html (http://forum.multitool.org/index.php/topic,38447.0.html)
-
Got my BO crimperless LM PST today. It is in pretty bad shape though. The plan is to take it apart and rebuild it with the tools i need for EDC :D
-
Uh oh, it seems that more and more multis are joining the family lately...... :)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF0719.jpg)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF0720.jpg)
This PST II arrived today from Sazabi. He said it was new, and he wasn't kidding! It looks like this tool has seen NO use at all until it replaced my Spirit on my belt for a bit today at work. Date codes are 0999/1099. Great little tool, this is going to be a user. A big :twak: to nelly1974 for first telling me about the PST II and spotting this one for sale, :P and a big :tu: to Sazabi for a sweet deal.
-
Uh oh, it seems that more and more multis are joining the family lately...... :)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF0719.jpg)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF0720.jpg)
This PST II arrived today from Sazabi. He said it was new, and he wasn't kidding! It looks like this tool has seen NO use at all until it replaced my Spirit on my belt for a bit today at work. Date codes are 0999/1099. Great little tool, this is going to be a user. A big :twak: to nelly1974 for first telling me about the PST II and spotting this one for sale, :P and a big :tu: to Sazabi for a sweet deal.
Well I think you have just decided what I'm going to carry today. Mine has been a little modified but is still essentially a PST II (just with a fully plain blade and an extra slip washer to stop the blade clumping). Great tool selection in the PST II and in such a slim package. :tu:
-
Surge BO 8)... again :whistle: After two years of infidelity with Spirit :facepalm:
(http://img210.imageshack.us/img210/704/p1140081m.jpg)
(http://img835.imageshack.us/img835/9253/p1140097c.jpg)
(http://img269.imageshack.us/img269/506/p1140085w.jpg)
(http://img193.imageshack.us/img193/874/p1140089g.jpg)
-
BNIB PST, although the box was for an original super tool, Do'h.
-
Surge BO 8)... again :whistle: After two years of infidelity with Spirit :facepalm:
(http://img193.imageshack.us/img193/874/p1140089g.jpg)
I like this photo the best 8) 8)
-
Leatherman Fuse, but I don't care for it so much. I need to stick to the Leatherman Super Tool :salute:
-
Leatherman send a brand new ST 300 in exchange for my broken old ST. Now I'll have to choose my new edc, the Rebar I bought some weeks ago to have a companion while the ST is at service or the much stronger but huge ST 300.
-
A Camo Fuse came in the mail today. Happy to have it in the growing Zytel collection. it arrived in that crazy plastic shell you need a rescue company to get it out.
Its super oily on the inside blade handle and the sissors are soaked too. Date stamped 0411-0411 the lube held up well,but holy crap its greasy. what oil does Leatherman use out of sheer curiosity.
-
A 20th Anniversary Wave. :)
-
I just picked up A LEATHERMAN BLAST.
-
My wife bought a Leatherman Wave for me today. She saw it on clearance at the local Meijer store.
-
The c33 "Crater" with individual flathead and Phillips screwdrivers.
It the closest thing to the new Emerson"pocketknife", coming out in october.
-
Just fixed up my Fuse with the saw Eric sent me :D
(http://farm9.staticflickr.com/8284/7535302570_8ce28c8147_b.jpg)
-
My first real multitool.
(http://i105.photobucket.com/albums/m234/wave180/2.jpg)
(http://i105.photobucket.com/albums/m234/wave180/1.jpg)
(http://i105.photobucket.com/albums/m234/wave180/3.jpg)
-
Congrats - the Charge is a great tool :cheers:
-
My first real multitool.
And an excellent tool it is :tu:
-
Squirt PS4, a bit disappointed in the philips screwdriver.
-
Got a Surge, Wave and Micra within the last 7 days :o
Only the Surge is brand new though.
I only popped onto the forum to see what tools are available and best suited to my needs, now I've got some sort of multi tool buying fever :facepalm:
-
My latest, courtesy of Mercury - Charge TTi
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF0750.jpg)
-
A few arrived today.
(http://img.tapatalk.com/51b2bc96-2b03-c02f.jpg)
That will be it for a while now.
-
A few arrived today.
(http://img.tapatalk.com/51b2bc96-2b03-c02f.jpg)
That will be it for a while now.
Good selection Chip,some of there best oldies. :salute:
-
A few arrived today.
(http://img.tapatalk.com/51b2bc96-2b03-c02f.jpg)
That will be it for a while now.
Good selection Chip,some of there best oldies. :salute:
Thanks, I had this arrive a little while ago.
(http://img.tapatalk.com/51b2bc96-3307-f27e.jpg)
It's a PST that arrived in a Supertool box.
(http://img.tapatalk.com/51b2bc96-3340-1ff8.jpg)
And a different box to which my actual Supertool arrived in today.
-
Another Wingman was bought cheap at Home Depot. with crazy trigger safe plastic and a metal clasp on the plier head scratching it up i was a little pissed off to work that crap over
-
(http://img.tapatalk.com/a6934899-6312-b0a4.jpg)
I'm going to try a MUT I picked up in place of my charge on my duty belt.
-
A few arrived today.
(http://img.tapatalk.com/51b2bc96-2b03-c02f.jpg)
That will be it for a while now.
Those are three good'uns all right. :cheers: I was carrying my Supertool 200 last week at work and it's still a crackingly capable tool. 8)
-
That's a great trio!!!!
-
BO,CC Kick arrived in the mail with the TU47 today.
-
The Mighty Supertool 300, Man I love this beast!
(http://i105.photobucket.com/albums/m234/wave180/486232_498303050184790_563007366_n.jpg)
(http://i105.photobucket.com/albums/m234/wave180/389055_498303033518125_1364573141_n.jpg)
(http://i105.photobucket.com/albums/m234/wave180/283682_498303143518114_1534667555_n.jpg)
(http://i105.photobucket.com/albums/m234/wave180/391460_498302976851464_384636503_n.jpg)
-
great pictures Wave180. :cheers:
-
great pictures Wave180. :cheers:
+1 :tu:
-
The Mighty Supertool 300, Man I love this beast!
Oh yes :cheers:
(http://img98.imageshack.us/img98/258/p1140256.jpg)
(http://img29.imageshack.us/img29/2079/p1140257j.jpg)
(http://img440.imageshack.us/img440/9999/p1140258.jpg)
(http://img844.imageshack.us/img844/3184/p1140262g.jpg)
-
@ wave180 and Rahmed: Great pics of an awesome tool guys, the ST300 is always in my personal top 3 of all time favorit multitools, just love it 8).
-
Skeletool CX :)
-
My latest Leatherman 8).
(http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20New%20Wave%20vs%20Old%20Wave/090.jpg)
(http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20New%20Wave%20vs%20Old%20Wave/047.jpg)
-
(http://i1156.photobucket.com/albums/p561/trouthunter7/2012-05-02090943.jpg)
-
My latest Leatherman 8).
(http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20New%20Wave%20vs%20Old%20Wave/090.jpg)
(http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20New%20Wave%20vs%20Old%20Wave/047.jpg)
Congrats on the new Wave, it's been my EDC since I got one 4 months ago. GREAT tool!
-
Juice KF4 Nib off ebay. Seller still has 3 left if you want one, I paid $49.99 but they have been popular for him so he has upped the price to $55 usd . Good service 8 days from USA to Australia...Happy camper here! :D
http://www.ebay.com.au/itm/LEATHERMAN-JUICE-TOOL-KF4-NIB-/310415740345?pt=Collectible_Knives&hash=item4846384db9#ht_500wt_1022 (http://www.ebay.com.au/itm/LEATHERMAN-JUICE-TOOL-KF4-NIB-/310415740345?pt=Collectible_Knives&hash=item4846384db9#ht_500wt_1022)
-
BO MINITOOL!
AND
BO EOD ST300!!
And yes, cap lock needed
-
Just got another PST off of Captain Spaulding.
-
Juice KF4 Nib off ebay. Seller still has 3 left if you want one, I paid $49.99 but they have been popular for him so he has upped the price to $55 usd . Good service 8 days from USA to Australia...Happy camper here! :D
http://www.ebay.com.au/itm/LEATHERMAN-JUICE-TOOL-KF4-NIB-/310415740345?pt=Collectible_Knives&hash=item4846384db9#ht_500wt_1022 (http://www.ebay.com.au/itm/LEATHERMAN-JUICE-TOOL-KF4-NIB-/310415740345?pt=Collectible_Knives&hash=item4846384db9#ht_500wt_1022)
I bought a NIB KF4 from this vendor also. It arrived today and is excellent!
-
My latest is Rebar
(http://i46.tinypic.com/1e3w9x.jpg)
(http://i49.tinypic.com/o9ojld.jpg)
-
I cleaned out my wife's minivan today. In the toolbox she had with stuff she'd collected from other old vehicles of ours I found an original PST, complete with sheath, bit driver, bits and holder, and paperwork!
-
Juice S2. Have wanted one ever since i was in highschool... Mostly because of the color(Got the orange one)
I love the feel of it, but i am a little disappointed with the scissors. All the reviews and videos i have seen have raved about them, and how they are the best scissors on any leatherman. They are certainly the biggest, but they dont feel nearly as solid as the ones on my Blast or Wave.
Would also prefer to have something other than three flat head drivers. Maybe a precision bit holder? The S2 seems pretty popular with IT guys, so i'm sure they would get more use out of that than the medium flat head.
-
Juice Pro and 20th Anniversary Wave :mail: from ebay.
-
Some old gold showed up a couple days ago. :mail: :D
-
I got an original ST the other day, with the original leather sheath to boot. I forgot to post here when I got it, so that's why I'm late.
I really bought it for trade fodder, it's in the trade section and I'm open to offers!
-
Got myself a Supertool 200. Barely used, date codes are 0403/1003. Very nice.
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF0833.jpg)
-
Juice S2. Have wanted one ever since i was in highschool... Mostly because of the color(Got the orange one)
I love the feel of it, but i am a little disappointed with the scissors. All the reviews and videos i have seen have raved about them, and how they are the best scissors on any leatherman. They are certainly the biggest, but they dont feel nearly as solid as the ones on my Blast or Wave.
Would also prefer to have something other than three flat head drivers. Maybe a precision bit holder? The S2 seems pretty popular with IT guys, so i'm sure they would get more use out of that than the medium flat head.
The scissors on my orange S2 have been fine, better than the scissors on some of my SAKs in fact. They're one of the reasons I like my S2 so much, and lately I've been carrying it a lot more than a SAK. (Who am I kidding? I carry my S2 and a SAK every day... :whistle: )
I agree about the three flathead drivers... ugh. I'd gladly loose the medium or large one for a size 0 phillips. I'd prefer the blade be flat ground too, instead of the cheap hollow ground one it comes with.
All things considered though, I like my S2 so much, I've got a CS4 at the top of my wish list for my next MT.
-
Juice S2. Have wanted one ever since i was in highschool... Mostly because of the color(Got the orange one)
I love the feel of it, but i am a little disappointed with the scissors. All the reviews and videos i have seen have raved about them, and how they are the best scissors on any leatherman. They are certainly the biggest, but they dont feel nearly as solid as the ones on my Blast or Wave.
Would also prefer to have something other than three flat head drivers. Maybe a precision bit holder? The S2 seems pretty popular with IT guys, so i'm sure they would get more use out of that than the medium flat head.
The scissors on my orange S2 have been fine, better than the scissors on some of my SAKs in fact. They're one of the reasons I like my S2 so much, and lately I've been carrying it a lot more than a SAK. (Who am I kidding? I carry my S2 and a SAK every day... :whistle: )
I agree about the three flathead drivers... ugh. I'd gladly loose the medium or large one for a size 0 phillips. I'd prefer the blade be flat ground too, instead of the cheap hollow ground one it comes with.
All things considered though, I like my S2 so much, I've got a CS4 at the top of my wish list for my next MT.
Lately, I've been carrying my new gray S2 and Xe6 more often. Possibly due to my foot's condition forcing me to realise my days of "hacking the airfield out of the jungle" are pretty much over :cry:
-
Juice Pro and 20th Anniversary Wave :mail: from ebay.
:o :o 8) 8) 2 Mighty tough to find LM's mate 8) 8) 8).
Not a 'Hardcore Collector' :think: :think: :pok: :pok: :D :D :D.
Congrats mate :tu:
-
I like the discontinued stuff :whistle:
-
Surge with a free Style (and LED Lenser V9, it's horrible).
Now starting to nag my mate to sell me his PST :whistle:
-
Charge TTi
(http://img.tapatalk.com/6364a129-76da-af3a.jpg)
-
Charge TTi
Very nice.. 8)
-
Very nice.. 8)
Thanks, this is my first LM and I cant seem to put it down, I got a great deal on it and with a full bit kit it goes everywhere I do, now im just waiting on a skinth to put it in!
Was going to get a sog crosscut but after reviews ive read looks like i might go with a micra for my keychain.
-
Amici,
Just picked up another Juice S2 in of all colors, Orange!!
Cheers,
Serge
-
Well my wife and I are celebrating 5 years of marriage (8 together) on Saturday, but since I am out of town with work all week and we have no babysitter Saturday night we decided to celebrate today. I got her some earrings and a ring stand(she always sets her engagement ring down and forgets it, it sticks out too far for her profession to allow it at work due to latex gloves).
She got me a lovely little package containing a Storm Gray Juice C2 and a Red Style. I've never had a style and I must say that it is pretty cool. I like how all the tools open AWAY from the keyring end, something my Vic Manager does not do. And the C2 is sweet, I was thinking of getting an S2 lately but funds are short and I really don't care for the juice scissors anyway. Hands down the coolest gift of the year so far.
-
I just received NIB Juice KF4 :mail: :ahhh
(http://i47.tinypic.com/2uh4tx1.jpg)
(http://i50.tinypic.com/spygxe.jpg)
No. 29 in my LM mt collection...
-
One gently used SS CC PST. ;) :D
-
One gently used SS CC PST. ;) :D
8)
-
I just picked up a combo pack with Freestyle and Style cs , it was on special offer at Clas Olsen store :D
-
One gently used SS CC PST. ;) :D
8)
I'm with David.. 8)
-
One gently used SS CC PST. ;) :D
8)
I'm with David.. 8)
I'll be putting up up in my Garage Sale thread soon. :pok:
-
One gently used SS CC PST. ;) :D
8)
I'm with David.. 8)
I'll be putting up up in my Garage Sale thread soon. :pok:
*coughyougotcoughpmcough*
-
The perfect technician tool.
Sent from my HTCEVOV4G using Tapatalk 2
-
This BO PST arrived today. :mail: :D
-
This BO PST arrived today. :mail: :D
Ohh, that's a nice one David.. :drool: You know where I am if you ever get tired of it.. ;) :D
-
My new Rebar plier head in my old Charge Ti. Together both of them are my work force. Oh...and in the background is LM T-shirt.
-
My new Rebar plier head in my old Charge Ti.
How difficult is it to do that? Easy peasy lemon squeezy or send um off to have someone else do it?
-
In fact, I did both of them myself by follow Metropolicity's thread.
-
In fact, I did both of them myself by follow Metropolicity's thread.
I can't stand the gap :).
But of you can live with it, it's a simple drop in.
-
In fact, I did both of them myself by follow Metropolicity's thread.
I can't stand the gap :).
But of you can live with it, it's a simple drop in.
Sweet!
-
I've just unboxed my brand new blast. I think I have another favorite :cheers:. I'll post some pictures later.
-
This BO PST arrived today.
8) !!! I need one like this. :D Nice one David. :tu:
-
Amici,
Just picked up another Juice S2 in of all colors, Orange!!
Cheers,
Serge
Orange rocks! My S2 is orange and I love it! :D
Well my wife and I are celebrating 5 years of marriage (8 together) on Saturday,...
Congrats! :cheers:
I just received NIB Juice KF4 :mail: :ahhh
Very cool!!! I'd love to have one, if I could find one!!! :facepalm:
-
My newest Leatherman is 8 Micras. I wanted all the colors I could find, so in addition to my 2 SS Micras, I added 2 blacks (don't ask), gray, SS, green, pink, red, and a blue.
I also got a hot foot flash for my camera which really adds to the quality of my photos.
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/016-2.jpg)
-
Nice Micras Hammer! 8) :tu: :)
-
Nice Micras Hammer! 8) :tu: :)
Thanks, David. I just now paid for one of the Leatherman Charge TTi Multi-Tool, 24k Gold Plated Functions and Handles. I probably paid too much for it, but it was the cheapest one I could find on fleaBay.
Paying too much for something doesn't really bother me too much if it's something I really want, and I really wanted the Gold plated Charge. I'll post pics when it gets here.
-
Is it here yet? :D I sure want to see a pic of it when it arrives. :)
-
Nice, Hammer :salute: are those the painted ones or the ones with alu scales added?
-
Nice, Hammer :salute: are those the painted ones or the ones with alu scales added?
They are not painted, (IMHO). Although I am not an expert by any stretch of the imagination, it seems obvious to me that the coloring is definitely a part of the alu scales. Is there any way I can tell for sure?
They all came in their original packaging. The pink was in a clamshell pack. They all say "anodized aluminum handles".
-
Nice, Hammer :salute: are those the painted ones or the ones with alu scales added?
They are not painted, (IMHO). Although I am not an expert by any stretch of the imagination, it seems obvious to me that the coloring is definitely a part of the alu scales. Is there any way I can tell for sure?
They all came in their original packaging. The pink was in a clamshell pack.
There's no white print on the painted Micras.. :) Great lineup.. :tu:
-
Nice, Hammer :salute: are those the painted ones or the ones with alu scales added?
They are not painted, (IMHO). Although I am not an expert by any stretch of the imagination, it seems obvious to me that the coloring is definitely a part of the alu scales. Is there any way I can tell for sure?
They all came in their original packaging. The pink was in a clamshell pack.
There's no white print on the painted Micras.. :) Great lineup.. :tu:
:tu: I was on my cell phone, I only saw the pretty colors. :D
-
Nice, Hammer :salute: are those the painted ones or the ones with alu scales added?
They are not painted, (IMHO). Although I am not an expert by any stretch of the imagination, it seems obvious to me that the coloring is definitely a part of the alu scales. Is there any way I can tell for sure?
They all came in their original packaging. The pink was in a clamshell pack.
There's no white print on the painted Micras.. :) Great lineup.. :tu:
You are absolutely right! There is NO paint on the blue one, and on the other colored ones, there are white markings, but I cant tell if they are decals or paint. I went to the Leatherman web page, and it shows a tiny thin line in the writing, as opposed to the bold markings on my Micras. I will have to say that my Micras are painted. :oops:
-
You are absolutely right! There is NO paint on the blue one, and on the other colored ones, there are white markings, but I cant tell if they are decals or paint. I went to the Leatherman web page, and it shows a tiny thin line in the writing, as opposed to the bold markings on my Micras. I will have to say that my Micras are painted. :oops:
Painted Micras are pretty rare and it looks like your colored ones are anodized.. :)
Here's a few threads:
http://forum.multitool.org/index.php/topic,575.0.html (http://forum.multitool.org/index.php/topic,575.0.html)
http://forum.multitool.org/index.php/topic,9955.msg184105.html#msg184105 (http://forum.multitool.org/index.php/topic,9955.msg184105.html#msg184105)
-
A little late with with this cheap haul. MUT wrench,really handy with the EDC work MT's. The BO Kick clip that FITS LIKE IT SHOULD with no hammers,o-rings or vise grips. A sheath for the now backburner Rustman. Also the old Wave sheath I need an old Wave for. By the way the wave sheath is like cardboard.I read into it somewhere one here and it got the same review. Maybe saddle soap or mink oil will soften it up?
-
Is it here yet? :D I sure want to see a pic of it when it arrives. :)
In the ad it said it would be here between 8/10 and 8/14. I paid for it Monday evening and I got an email from the seller that said he had received the money and would ship it first thing Tuesday morning. It's coming from Houston, TX. I'll post a pic as soon as it arrives.
Hammer
-
Today I was pleasantly surprised when the mailman dropped off a package. I opened and it contained a Leatherman Pulse! It was one I found on eBay and the ad said it was new. I inspected it and it did appear to be new, so I was happy! Here's a photo...
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/Pulse.jpg)
-
The Pulse is a nice tool. Glad you got one Hammer! How do you like the locks?
-
In addition to the dozens of MTs I already have, I got my Core back from a buddy in the Marines. I just bought a Squirt PS4, and found an unused, NIB Juice KF4 I forgot I had. Good day.
-
My new leatherman is a Black Charge ALX
-
Orange Fuse from my good pal JoeBW :cheers:
(http://img.photobucket.com/albums/v307/jooliesews/Bobbys/orangefuseb.jpg)
-
Orange Fuse from my good pal JoeBW :cheers:
(http://img.photobucket.com/albums/v307/jooliesews/Bobbys/orangefuseb.jpg)
Bob what a nice 'set' you have mate :drool: :D :D
-
Very Dutch :cheers:
-
My prize from the anniversary giveaway came today :mail:
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/mto_giveaway.jpg)
So Leatherman ST300 and Leatherman Monarch 400 are my latest Leathermans :D
-
^Nice combo, congrats.
-
Sold the Juice S2 I bought in the 9th reply of this thread, bought another Skeletool CX. This one will have the new plain edge instead of the CE like my old one. Not sure how I feel about that but I'm sure I'll get over it :)
-
My prize from the anniversary giveaway came today :mail:
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/mto_giveaway.jpg)
So Leatherman ST300 and Leatherman Monarch 400 are my latest Leathermans :D
You lucky dog you! Congrats :cheers:
-
The PS4 and style cs arrived. The better half took the PS4 for her own use. :tu: The style cs is well like a cupon cutter you can open beer with and pick ticks off the hound. Its a cool LITTLE tool.The PS4 snaps and springs out with some aggression for the plier and wire cutters. I have given it up. Another will be on its way.
-
I couldn't find my Spirit, and after a week of searching ordered a Rebar. I found the Spirit several minutes after the Rebar shipped lol :D. I like the Rebar, lighter than I expected, good tools. I wear jeans to work and switch to shorts when I get home, so I just leave one on each belt and both get good use.
-
I couldn't find my Spirit, and after a week of searching ordered a Rebar. I found the Spirit several minutes after the Rebar shipped lol :D. I like the Rebar, lighter than I expected, good tools. I wear jeans to work and switch to shorts when I get home, so I just leave one on each belt and both get good use.
Good man. :salute: The Rebar is my favorite tool at the moment. :)
-
The style PS arrived today.
-
Got my black oxide Supertool 300 in a trade with Nelly for my extra Work Champ. It's my first 'full size' MT. This thing is definitely a beast! I like it a lot, but I think I'm going to have it live in the glove box of my wife's minivan. For our needs, I think that'll be the best use for it.
-
Is it here yet? :D I sure want to see a pic of it when it arrives. :)
My 24k Gold Plated Charge TTi has finally arrived. I am very happy with it. Here are some pics...
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/24kCharge003-1.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/24kCharge004-1.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/24kCharge005-1.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/24kCharge006-1.jpg)
-
The Rebar is my favorite tool at the moment. :)
My favorite also. :D
-
Is it here yet? :D I sure want to see a pic of it when it arrives. :)
My 24k Gold Plated Charge TTi has finally arrived. I am very happy with it. Here are some pics...
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/24kCharge003.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/24kCharge004.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/24kCharge005.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/24kCharge006.jpg)
Hammer that Charge is a looker!
-
The Pulse is a nice tool. Glad you got one Hammer! How do you like the locks?
I loathe the locks! They tear my thumbs up. Still though, I have to have it!
-
The Rebar is my favorite tool at the moment. :)
My favorite also. :D
So a Rebar is just a mini-ST300? Looks just the same except for the size, or is there something I'm missing? Now that I've got an ST300, I'm finding myself much more interested in a Rebar and a Charge... The Rebar head in a Charge AL would be pretty sweet! :drool:
-
(http://img.tapatalk.com/4d110379-1d7e-aa3a.jpg)
The Style PS from the MTO/Facebook giveaway :tu:
Very nice :)
So I'll just say wholeheartedly THANK YOU to you all :tu:
-
(http://img.tapatalk.com/4d110379-1d7e-aa3a.jpg)
The Style PS from the MTO/Facebook giveaway :tu:
Very nice :)
So I'll just say wholeheartedly THANK YOU to you all :tu:
Glad it arrived safely.. :) Good work Travis.. :tu:
Sent from my Iphone
-
I got a polished Sideclip today date stamped 0204/0504 and 0404/0404 :D I just love Ebay :tu:
-
I got a polished Sideclip today date stamped 0204/0504 and 0404/0404 :D I just love Ebay :tu:
+1 ::) :D.
Crap week at work , home Friday arvo & what is in the letter box , a Priority Mail Small Flat Rate Box :think: :think: and what was in it :think:;
A ORANGE FUSE 8) 8) 8) + a H5 LED Lenser headlight that was part of the package 8). I am quite liking my first name brand headlight 8). Wearing it around the house now :D :D.
Youngest son " Dad it's got a red light at the back ??? :think: :think:" Me " Yep it's for if your walking on the road or on your bike ;)" Youngest son "or being an idiot inside" :( :D :D :D :D. A 'Idiot Light' man I am set now :P :D :D
-
Orange Fuse very cool :tu:
-
My LM c33Tx :tu:
-
The local second hand shop had an original Leatherman in the case today. It is in very good condition. No nicks or marks on the blade and it is still very sharp with no sign of it ever having been sharpened. In fact the only marks on the tools are some very minor marks on the phillips driver. The sheath has a few minor scuffs and a slight amount of tarnish on one of the rivets.
The price was reasonable so it came home with me.
This is the first original Leatherman that I've handled, and I can see why this model has some very loyal fans. It is built like a tank and has a very good assortment of tools.
It does not have a pocket cliip, so it won't become my EDC and it may even be up for trade soon.
-
I got a polished Sideclip today date stamped 0204/0504 and 0404/0404 :D I just love Ebay :tu:
Score!!! I would give an arm away for a polished sideclip!! Mine is the beadblasted version and i have owned it since 2000 so it is really beat up.
Sent from my myphone using Crapatalk
-
A replacement wave amwwa charge tti
Sent from my LG-P925 using Tapatalk 2
-
ORANGE FUSE :tu:Arrived today along with the sweet headlamp. The fuse is so vibrant with the orange. I dont know weather to use it or land C-17's with it. I cant wait to use the headlamp later in the yard. Im gonna be rolling my head around making light saber sounds looking for worms. The best part of the package is the LM sticker of all things. i feel like im 10 with all this excitement over a mail parcel.
-
Skeletool CX
Charge AL
Freestyle
Style CS
Super Tool 300
Luvin the Skeletool. My favorite along with my charge. Got grea deals on both (Skeletool CX $46, Charge AL $65)
-
Skeletool CX
Charge AL
Freestyle
Style CS
Super Tool 300
Luvin the Skeletool. My favorite along with my charge. Got grea deals on both (Skeletool CX $46, Charge AL $65)
Nice haul you took in. Welcome to the fourm.
-
The Pulse is a nice tool. Glad you got one Hammer! How do you like the locks?
I loathe the locks! They tear my thumbs up. Still though, I have to have it!
I felt the same way when I first got a Pulse but I soon got used to them. :)
-
Skeletool CX
Charge AL
Freestyle
Style CS
Super Tool 300
Luvin the Skeletool. My favorite along with my charge. Got grea deals on both (Skeletool CX $46, Charge AL $65)
Welcome to the forum ToolDiva. :cheers:
$65 for an AL is a fantastic price, mind if I ask where you got it from?
-
Just got a Style PS in a trade with Heinz. Now I need to ship him his Squirt S4.
I'm not sure how I feel about the tools on it, but at least I have something to take with me if I need to fly.
-
Just got a Style PS in a trade with Heinz. Now I need to ship him his Squirt S4.
I'm not sure how I feel about the tools on it, but at least I have something to take with me if I need to fly.
Well, I can testify that it is definitely TSA friendly, as I flew with it in my EDC bag that I took as a carry-on with me a number of times when I was flying back home to California for the holidays when I was teaching in Iowa. The security guys would sometimes start with a "You're gonna have to get rid of that" line but after I told them to look actually at it, it shut them up pretty quick.
-
The Pulse is a nice tool. Glad you got one Hammer! How do you like the locks?
I loathe the locks! They tear my thumbs up. Still though, I have to have it!
I felt the same way when I first got a Pulse but I soon got used to them. :)
I actually like the locks on the pulse, but the same ones on the ST200 drive me nuts. I can't get a comfortable grip when using the inner tools on the ST200, but due to it's smaller size the pulse fits my hand perfectly.
-
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/2ed08349.jpg)
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/fc7d8970.jpg)
The Orange Fuse sure is a bit of a looker 8) 8) 8).I reckon a BO Fuse + the orange treatment would look even better :think: :gimme: :D
Now when will LM do a TOXIC GREEN FUSE :gimme: :gimme: :D
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/5fe598a6.jpg)
-
Here are my latest Leatherman aquisitions! :angel:
-
Sweet!
I just got a Squirt S4; great little tool... it's in like-new condition. Nice combo of tools; the scissors need a little bit of work, but otherwise seem good. I like the hand feel much better than the Style CS. The blade is the same, but this one is in good condition. Bottle opener is tiny but will work, and I like the very small philips and flathead drivers it has; great for glasses wearers like me.
I'm torn whether to keep it as a pocket tool, or put it in my personal FAK, which is generally with me most of the time anyway. :facepalm:
-
I love the S4 as well. :tu: Same goes for the P4.
-
I got a wave. Seems in England you are not allowed it in public :-(
-
I have a PST and a New Old Stock PST II on its way. The PST II is still in the packaging, never opened.
-
This is my first PST and I must say I really like its look and feel.
-
I just opened up a SUPER rare Black Oxide Charge AL.
Not ALX...AL! :)
-
I just opened up a SUPER rare Black Oxide Charge AL.
Not ALX...AL! :)
That's pretty sweet don't think I've seen a black al.
Sent from my A500 using Tapatalk 2
-
Yah, they were made in very short quantity when they released the Charge AL and ALX.
-
I got a wave. Seems in England you are not allowed it in public :-(
Not without a valid reason etc etc etc :whistle:
-
My LM in last months >:D
(http://img543.imageshack.us/img543/9762/leathermanline1.jpg) (http://imageshack.us/photo/my-images/543/leathermanline1.jpg/)
-
Wow nice line-up there, you have all the cool items :tu: :drool:
Can you list them please as the picture is kind of small
-
Can you list them please as the picture is kind of small
Here you are, unfortunately, do not have a better photograph :
PST, Mini Tool, Super Tool, Micra, Wave Orginal, Flair, Crunch, Juice Kf4, Juice CS4, Super Tool 200, Squirt P4, Fuse, Kick, Surge Black, Vista, Charge TTi, Skeletool, Super Tool 300, Style, Squirt PS4, T-Rex, Wingman
-
My brand new PST II just arrived.
(http://i1156.photobucket.com/albums/p561/trouthunter7/2012-09-01152342.jpg)
-
You will like the PSTII Trouthunter,its still one of my favorites. :salute:
-
Leatherman is taking over my bank account! It's a good thing I'm not married because I don't think this lifestyle is conducive to a healthy relationship. :gimme:
4 months ago I had 2 micras that I used for fishing. Today I have 56 in my lockable toolbox, 2 on my boat, and two more on the way (an orange fuse and a gold plated sidekick). It's only going to get more intense because I know myself very well. Not to mention I am bipolar, and if any of you know anything about bipolar people, we tend to look for instant gratification, so I will not rest until I feel that I have quenched that urge for Leatherman Multitools.
Thanks alot MTO!
Oh, and the purpose of this post is to say that my latest Leatherman Multitools will be the orange fuse and the gold plated sidekick.
It's all good!
-
Got the Style PS in the mail yesterday. Not planning on flying soon but it's still a very nice little tool.
-
Scored a Blue S2 juice in the mail today and it will be rotated in change with my Skeletool for general Edc dutes :D
-
Scored a Blue S2 juice in the mail today and it will be rotated in change with my Skeletool for general Edc dutes :D
Blue? :woohoo:
There's a green one and a red one out there too I believe. Not an easy find.
-
From Ebay of course not mint but good enough for my number 2 slot edc :tu:
-
Leatherman flair
(http://i613.photobucket.com/albums/tt214/OCPSucked/IMG-20120904-00383.jpg)
(http://i613.photobucket.com/albums/tt214/OCPSucked/District1-20120904-00385.jpg)
Sent from Ash forum mobile
-
Ordered a Supertool 300 today. There is a package on Amazon right now, ST300 and a Monarch 400 for $55.xx, free shipping available if you can wait 8 days. Figured that was good enough to snatch it up! Should be here in 8 days or less :)
-
The latest addition to my Leatherman collection is the Orange Fuse. I will post photos when I get a chance to take some.
-
Core :salute:
(http://img222.imageshack.us/img222/4794/corebw.jpg)
-
My gold plated Sidekick came in the mail today. It is truly a work of art! My camera is not working at the moment, so I am going to try and fix it. If I can't fix it, I'll break out my small point and shoot camera and take pics of the Sidekick and orange Fuse.
-
Okay, so I've fixed my camera (I had to get the settings right), so here are pictures of my Orange Fuse and Gold Plated Sidekick.
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/019-1.jpg)
(http://i269.photobucket.com/albums/jj58/drkpics/Multi%20Tools/043.jpg)
-
Woo!
20th anniversary black Wave! Mint!
Sent from my iPad using Tapatalk HD
-
Woo!
20th anniversary black Wave! Mint!
Sent from my iPad using Tapatalk HD
Crank up that camera and show us that mint BO Wave! (It is black oxide, right?)
-
Woo!
20th anniversary black Wave! Mint!
Sent from my iPad using Tapatalk HD
Crank up that camera and show us that mint BO Wave! (It is black oxide, right?)
Nope not BO it is black DLC 8) 8)
-
Woo!
20th anniversary black Wave! Mint!
Sent from my iPad using Tapatalk HD
Crank up that camera and show us that mint BO Wave! (It is black oxide, right?)
Nope not BO it is black DLC 8) 8)
Totally DLC. Shes a beaut! I'll shoot a pic in a bit.
-
Nice pics guys! Can't wait to see pics of the Wave Eric!
-
Got a LM carabineer....
Why do I do these things?
Hi,my name is John and I really do have a problem... :facepalm:
-
Got a LM carabineer....
Why do I do these things?
Hi,my name is John and I really do have a problem... :facepalm:
Hi John!! :salute:
-
I have been lacking on posting anything in this thread. I am hoping to add a Crunch to the EDC soon. Some nice looking Leathermans here guys. Can't wait to see pictures Eric. :tu:
-
I just got a pink style cs for my girlfriend, I'm trying to get her into multitools.
Sent from my A500 using Tapatalk 2
-
By request! No fancy studio shots but shots nonetheless.
Mint 20th anniversary Wave!
(http://img.tapatalk.com/d/12/09/11/gu6a4y5y.jpg)
(http://img.tapatalk.com/d/12/09/11/uja2y3ep.jpg)
(http://img.tapatalk.com/d/12/09/11/egavevyq.jpg)
Super rare Charge BO AL!
(http://img.tapatalk.com/d/12/09/11/ydy2eqyt.jpg)
(http://img.tapatalk.com/d/12/09/11/gamuqyjy.jpg)
And.....what? Black Cerakoted Crunch??!!
(http://img.tapatalk.com/d/12/09/11/tapydyny.jpg)
(http://img.tapatalk.com/d/12/09/11/abu3ujuh.jpg)
(http://img.tapatalk.com/d/12/09/11/u9eme8ad.jpg)
-
Great haul Eric.. :tu:
-
By request! No fancy studio shots but shots nonetheless.
Mint 20th anniversary Wave!
(http://img.tapatalk.com/d/12/09/11/gu6a4y5y.jpg)
(http://img.tapatalk.com/d/12/09/11/uja2y3ep.jpg)
(http://img.tapatalk.com/d/12/09/11/egavevyq.jpg)
Super rare Charge BO AL!
(http://img.tapatalk.com/d/12/09/11/ydy2eqyt.jpg)
(http://img.tapatalk.com/d/12/09/11/gamuqyjy.jpg)
And.....what? Black Cerakoted Crunch??!!
(http://img.tapatalk.com/d/12/09/11/tapydyny.jpg)
(http://img.tapatalk.com/d/12/09/11/abu3ujuh.jpg)
(http://img.tapatalk.com/d/12/09/11/u9eme8ad.jpg)
wow awesome finds there metro!!! ;D
Sent from my LG-P925 using Tapatalk 2
-
Oh the ck'd crunch is one of my creations :)
-
So0o0o0o0 awesome! :drool:
where do you get all the good stuff?!
-
So0o0o0o0 awesome! :drool:
where do you get all the good stuff?!
eBay. Very patient eBay.
The cerakote crunch is a collaboration between Jeff at 4bushweaponsrefinishingsystems :)
-
That Crunch is :drool: :drool: :drool:
-
Wow, I'm with the Captain, the crunch is aaaaaaaaaaaaawesome.
-
:whistle:
Thanks to evil & eric :cheers:
(http://imageshack.us/a/img707/1817/p1140738g.jpg)
(http://imageshack.us/a/img94/9812/p1140734k.jpg)
-
Exxxcelent :)
-
:whistle:
Thanks to evil & eric :cheers:
(http://imageshack.us/a/img707/1817/p1140738g.jpg)
(http://imageshack.us/a/img94/9812/p1140734k.jpg)
Great switcheroo mate 8) 8) :salute:
Did you have any problems :think: :think:
-
Thanks ;)
No problemo... just drilled out rivets, removed the springs blocking blades and put new rivets :salute:
(http://imageshack.us/a/img819/5787/p1140739.jpg)
(http://imageshack.us/a/img803/382/p1140740.jpg)
-
Got a LM MUT last month on eBay with the standard accessories (molle sheath and scope wrench), the bit kit and bit extender.
(http://farm9.staticflickr.com/8457/7989172823_142b8e184a_c.jpg)
-
Kick
(http://oi49.tinypic.com/30w5kkh.jpg)
-
Mine is a BO fuse that I somehow won off of Ebay. Once again, beer and ebay are not to be mixed...
-
Mine is a BO fuse that I somehow won off of Ebay. Once again, beer and ebay are not to be mixed...
Beerbayin' is a harsh mistress.
-
It just came in this afternoons post. Very Nice Japanese PST
(http://i1156.photobucket.com/albums/p561/trouthunter7/2012-09-19184138_zpsc58a1684.jpg)
-
Camo Blast.
-
Camo Blast.
David , that is a rare beast 8) 8) , you have been after one of those for awhile :think: :think:.
congrats mate 8) 8)
-
Camo Blast.
David , that is a rare beast 8) 8) , you have been after one of those for awhile :think: :think:.
congrats mate 8) 8)
Mat, the camo Blast has eluded me for over three years. It is nice to finally get one and at a good price. What few that have popped up in the last year or two have been very pricey.
-
Camo Blast.
David , that is a rare beast 8) 8) , you have been after one of those for awhile :think: :think:.
congrats mate 8) 8)
Mat, the camo Blast has eluded me for over three years. It is nice to finally get one and at a good price. What few that have popped up in the last year or two have been very pricey.
Did you land yours for a resonable price mate :think: :think:
It is funny how LM made bucket loads of camo Fuses but did no Kicks & very few Blasts :think: :think: :think:.
Congrats again mate on finally landing one 8) 8)
Now do I need a Camo Blast :think: :think: :ahhh :ahhh :D. Yep :( :( :D
-
Did a trade with the Capt. today for a CS4; nice little tool! I like the feel in-hand, very substantial. It's going to live in my hiking pack or my adventure pack; haven't decided which one yet, as I'll have to shuffle some other tools around and try and figure out what tools will compliment each other best. I think it will go well with a SAK, just have to figure out which one.
-
Camo Blast.
David , that is a rare beast 8) 8) , you have been after one of those for awhile :think: :think:.
congrats mate 8) 8)
Mat, the camo Blast has eluded me for over three years. It is nice to finally get one and at a good price. What few that have popped up in the last year or two have been very pricey.
Did you land yours for a resonable price mate :think: :think:
It is funny how LM made bucket loads of camo Fuses but did no Kicks & very few Blasts :think: :think: :think:.
Congrats again mate on finally landing one 8) 8)
Now do I need a Camo Blast :think: :think: :ahhh :ahhh :D. Yep :( :( :D
Yes, very reasonable. :)
You know you need one Mat. :pok: :D :D :D
-
I've been carrying Juice models for a lot of years mostly because they fit into my pocket well, but I realized that I only need that size MT for workday EDC because of how I have to dress. After considering my options for a weekend EDC I decided upon a Surge. Hey, I'm a big guy, so I can pull off carrying a big MT.
It showed up yesterday and I carried it today while I did some yard work. It is hefty, but I was comfortable with it in my pocket. I'm sure that it will be even more comfortable with the pocket clip installed.
-
Style CS. Now my Skeletool CX has a sibling to play with.
(http://i.imgur.com/hGyDr.jpg)
(http://i.imgur.com/Sn1nA.jpg)
(http://i.imgur.com/VXKyl.jpg)
-
I got the Wingman/ Style CS combo pack from Home Depot the other day
Sent from my iPhone 4S using Tapatalk
-
I got the Wingman/ Style CS combo pack from Home Depot the other day
Sent from my iPhone 4S using Tapatalk
-
This! I haven't had it very long, but it's my new favorite. It's replaced my Squirt P4 for now and I might even like it better than my SideClip... well, maybe.
(http://www.killedaway.com/images/JuiceS2.jpg)
-
Wingman. I have been using it as my EDC some i got it last week and have not even noticed its there with the pocket clip
I want a surge soon but wish it would come with replaceable wire cutters like the ST300 and others
I need to contact leatherman about fixing my wave scissors but i really don't want to part with it even for a couple weeks. has been on many hikes and camps with me
-
I got a Wingman at Home Depot on Thursday to use as EDC at work instead of my nicer Charge Ti. I did know about or see the combo pack for the same price or I would have grabbed that instead. I really don't need a Style but it would make a nice gift.
I like the scissors and the outside opening one handed knife on the Wingman as I use these the most and with easy access I don't need to carry a knife too.
The Wingmand looks a little cheap at first but has quickly become a favorite tool.
Won a nice lookking Core on ebay Saturday. That will be my at home tool for quick projects and will stay in the Kitchen "everything" drawer.
Tony
-
Using a discount coupon, I bought a Leatherman Rebar from the Eddie Bauer web site. I returned it a few days later for these reasons:
1) The web site stated it came with the leather case, but it arrived with the basic nylon case.
2) I concluded that I probably wouldn't use the Rebar much after all. The Pulse tools are more useful to me than the Rebar (scissors, tiny screwdriver, diamond coated file), but I realized I don't use the Pulse much either. The reason is due to the hassle of opening the entire tool to get to the individual blades. I've been spoiled by the Victorinox Spirit and Crescent ToolZall Pro which have blades which open from the outside and they are so much faster and easier to deploy.
3) The Rebar's knives and flat screwdriver blades are thin and have that "rust inviting" appearance compared with older tools. That said, I liked the beefy Philips driver.
-
My latest and also my first. Leatherman MUT.
(http://i195.photobucket.com/albums/z86/cfmg6910/Gallows/MUT1.jpg?t=1352165026)
-
I love the MUT!¡! I think you will too Gallows
(http://www.sherv.net/cm/emoticons/bad/gangster-with-gun-smiley-emoticon.gif)
-
I have a Core on the way along with 2 Leatherman Crater Knives, a C33B and the same one without the interchangeable bits.
I got a Micra too because my wife fell in love with mine. It arrived today, advertised as "new and pristine but not in the bubble pack" by an ebay seller with 100% feedback. I got a dirty tool with rust, obviously well used and the tweezers were broken off. The ebay photo is of a brand new tool with all the tools unfolded EXCEPT the tweezers. You can just see the edge of a complete tweezer though so they are there on the pictured tool. Odd the attempt to hide the tweezers in the photo then getting a tool without them. Sellers policy is no returns. This should get interesting and I've already contacted them and awaiting a reply.
-
Okay, good news. the selelr apologized for sending a used broken tool instead of the new one I paid for. She refunded in full and did not require I return the broken Micra
Tony
-
Okay, good news. the selelr apologized for sending a used broken tool instead of the new one I paid for. She refunded in full and did not require I return the broken Micra
Tony
Nice. Seems no matter where you acquire it, no one ever gets screwed by buying a leatherman
-
Sometime soon I hope to say that my latest Leatherman is the OHT. Availability is an issue. Sears online had them reasonably priced, but are out of stock.
-
I concluded that I probably wouldn't use the Rebar much after all. The Pulse tools are more useful to me than the Rebar (scissors, tiny screwdriver, diamond coated file), but I realized I don't use the Pulse much either. The reason is due to the hassle of opening the entire tool to get to the individual blades. I've been spoiled by the Victorinox Spirit and Crescent ToolZall Pro which have blades which open from the outside and they are so much faster and easier to deploy.
I had the same issue with the Pulse. Added to that was the assymetrical locks which I really couldn't get used to, and the tool didn't stop with me long at all. To me it ranks worse than the SOG Powerlocks with flappy covers for being a nuisance to get the tools in and out of
-
I concluded that I probably wouldn't use the Rebar much after all. The Pulse tools are more useful to me than the Rebar (scissors, tiny screwdriver, diamond coated file), but I realized I don't use the Pulse much either. The reason is due to the hassle of opening the entire tool to get to the individual blades. I've been spoiled by the Victorinox Spirit and Crescent ToolZall Pro which have blades which open from the outside and they are so much faster and easier to deploy.
I had the same issue with the Pulse. Added to that was the assymetrical locks which I really couldn't get used to, and the tool didn't stop with me long at all. To me it ranks worse than the SOG Powerlocks with flappy covers for being a nuisance to get the tools in and out of
Burn the heretics! (http://fc00.deviantart.net/fs5/i/2004/327/3/9/The_Villagers_Are_Restless_by_Zikes.gif)
:D
-
:D
-
Got my Core on Thursday and it looks as if it has never been used. I know the locking system does not get a lot of love here but it looks like a very capable tool. This one is going to be kept in the kitchen for everyday household tasks so the tool box can stay in the basement.
Got one of my Leatherman knives yesterday, the e302 with plain blade and two drivers. I added the removeable bit kit and it looks like a great tool. I typically use a knife every day more than other tools so this will be my EDC and my Wingman or Charge will be in my briefcase or bag.
Actually, I loved the e302 so much I hunted down a second one as a backup!
Once you drink the Leatherman Cool-Aid there is no going back.
Tony
-
Got my Core on Thursday and it looks as if it has never been used. I know the locking system does not get a lot of love here but it looks like a very capable tool. This one is going to be kept in the kitchen for everyday household tasks so the tool box can stay in the basement.
Got one of my Leatherman knives yesterday, the e302 with plain blade and two drivers. I added the removeable bit kit and it looks like a great tool. I typically use a knife every day more than other tools so this will be my EDC and my Wingman or Charge will be in my briefcase or bag.
Actually, I loved the e302 so much I hunted down a second one as a backup!
Once you drink the Leatherman Cool-Aid there is no going back.
Tony
But it's soooooooo good Tony!¡!
(http://www.sherv.net/cm/emoticons/bad/gangster-with-gun-smiley-emoticon.gif)
-
Two for me :D a Crunch and my first Blast finally came home, it went away late 2007 :tu:
-
Lucked out,and found a new in box Leatherman Mini at a local Gun & Knife show this afternoon,asked what he wanted for it,he said $40,couldn't get it out of my billfold fast enough,couldn't find a date on the Multi,but the box said 1986. :salute:
-
Lucked out,and found a new in box Leatherman Mini at a local Gun & Knife show this afternoon,asked what he wanted for it,he said $40,couldn't get it out of my billfold fast enough,couldn't find a date on the Multi,but the box said 1986. :salute:
Great score Smitty! :tu: An early MINI. 8)
-
Got a Leatherman S2 today. Not a fan of the uneven handles and the scissors. The scissors feel, operate and sound cheap/horrible. Think i will stick to the KF4's
-
I found a Fuse the other day :)
Very nice tool. I like the long knife on it.
I also found a nice Core a couple of weeks ago.
I have the small Kick since before so i guess I have to look for the Blast now. ::)
-
I always forget how long the blade is on the Fuse. In fact I was disappointed with the one on the Kick when I first got it as I was so used to the Fuse's longer, and thicker, blade.
-
BO Blast. The new go to EDC tool. I just with there was a better leather sheath for the thing. The new Leather ones just dont do it for me.
-
Just got my new leatherman OHT , did a review on it , was a little dispointed, but happy now,
http://www.youtube.com/user/deadz74 (http://www.youtube.com/user/deadz74)
ive been using leatherman tool for more than 16 years now and i bought and give most of them ,, i own more than 50 tools and only leatherman come to meet my needs, im about to combine the surge with the MUT pliers head, hope to see if its going to fit
-
Finally got a charge with my birthday money thanks to millhouse :tu:
-
Just purchased a red Style CS :multi:
-
The Leatherman Flair came today. In good condition,I couldnt be any more pleased. Now i have to find some sweet fancy wine and cheese so I can put it to work.
-
Got a LM Squirt S4 today in a package from Suveges. It was an extra that came with my Maxped M5. Thanks so much Suveges!¡!
-
I picked up a Juice KF4 and a skeletool cx just last week.
-
Never owned a KF4 but I would like one some day :think:
-
Just got my second user Sideclip today from Bruce. (Cheers mate!)
I have my eyes on a Knifeless Fuse next.
-
Got my KF4 and Juice Pro.
-
I got a BO MUT on Sunday and today I got an abused Supertool. No straight blade anymore(snapped off) and a bent small flat driver, but my brother revived it from even worse condition, and therefore means a lot to me as of today.
-
Got my KF4 and Juice Pro.
(http://i1205.photobucket.com/albums/bb437/kmanct3/B424C795-4A1B-42B2-91AC-0B3442822517-1129-0000003E39E8A356.jpg)
-
Very nice K!¡! More pics...........PLEASE!¡!
:worthless:
-
A Pirahna
-
Very nice K!¡! More pics...........PLEASE!¡!
:worthless:
You got it..(http://i1205.photobucket.com/albums/bb437/kmanct3/D483AB45-CD54-44FC-8D3E-AE9C5833DDE6-1129-00000041BBDA8013.jpg)
-
Very good then!¡!
-
The Leatherman Flair came today. In good condition,I couldnt be any more pleased. Now i have to find some sweet fancy wine and cheese so I can put it to work.
Nice. What did it set you back. I am on the hunt for one
-
still on the hunt for Juice Pro... few NIB out there but at costs... :D
my new arrival was a Leatherman Minitool BO.. (finally...after a very long wait and worth it :ahhh).. nice pairing to SS one. :cheers:
jo
Very nice K!¡! More pics...........PLEASE!¡!
:worthless:
You got it..(http://i1205.photobucket.com/albums/bb437/kmanct3/D483AB45-CD54-44FC-8D3E-AE9C5833DDE6-1129-00000041BBDA8013.jpg)
-
The KF4 was NIB,$68 and the Pro was like new ,ebay $35, think i did pretty good on that one!
-
I got a Crunch :ahhh :ahhh :ahhh :ahhh :drool: :drool: :drool: :drool: :drool:
(http://i19.photobucket.com/albums/b176/ebbingtide/EE4AA201-6063-4E2F-B699-2F0D6AE00576-164-000000089E4AAEAB.jpg)
-
I got a Crunch :ahhh :ahhh :ahhh :ahhh :drool: :drool: :drool: :drool: :drool:
(http://i19.photobucket.com/albums/b176/ebbingtide/EE4AA201-6063-4E2F-B699-2F0D6AE00576-164-000000089E4AAEAB.jpg)
Good score there Dunc. :tu: 8) :)
-
I got a Crunch :ahhh :ahhh :ahhh :ahhh :drool: :drool: :drool: :drool: :drool:
(http://i19.photobucket.com/albums/b176/ebbingtide/EE4AA201-6063-4E2F-B699-2F0D6AE00576-164-000000089E4AAEAB.jpg)
Very nice Dunc!¡!
-
Just got a Piranha.
-
Got a Crunch for Christmas and have not stopped playing with it yet. I got a new Rebar off of eBay and it, along with the Crunch could make a perfect "Now You're Ready" pair.. Both are pretty compact tools with just about every need covered and it is nice to have a second pair of pliers. They and my Pocketwrench II (with a mini Altoids tin full of driver bits) will stay in a Maxpedition Micro pouch for EDC.
Hmm, I wonder what Skinth case would hold the Rebar, Crunch and Pocketwrench II ?
Tony
-
The Brewzer has arrived.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MTs%20%20TWO/DSC03870.jpg)
-
:whistle:
(http://i748.photobucket.com/albums/xx122/50ft-trad/035-1.jpg)
-
Nice shot Al!¡! I really love depth of field shots!¡!
-
Thanks mate :tu: Just trying out some new gear and I'm a little out of practice :D
-
Yeah, I saw the thread where you posted that you got new stuff. If you need help shoot me an email or PM :2tu:
-
:whistle:
(http://i748.photobucket.com/albums/xx122/50ft-trad/035-1.jpg)
OOOOooooohhhhh Thats Nice :drool:
-
Yeah, I saw the thread where you posted that you got new stuff. If you need help shoot me an email or PM :2tu:
Cheers mate :cheers: It's probably just a matter of playing with it and finding out where all the settings are. Knowing the theory and putting it into practice are two different things :rofl:
OOOOooooohhhhh Thats Nice :drool:
Thanks mate :D
-
Cheers mate :cheers: It's probably just a matter of playing with it and finding out where all the settings are. Knowing the theory and putting it into practice are two different things :rofl:
I try to tell so many people that exact same thing but most won't listen
-
Yeah, I saw the thread where you posted that you got new stuff. If you need help shoot me an email or PM :2tu:
Cheers mate :cheers: It's probably just a matter of playing with it and finding out where all the settings are. Knowing the theory and putting it into practice are two different things :rofl:
OOOOooooohhhhh Thats Nice :drool:
Thanks mate :D
Theres something about that photo thats really good :tu:
Any chance you could replicate it with a 18year old blonde in a orange basque ?
:rofl:
-
Yeah, I saw the thread where you posted that you got new stuff. If you need help shoot me an email or PM :2tu:
Cheers mate :cheers: It's probably just a matter of playing with it and finding out where all the settings are. Knowing the theory and putting it into practice are two different things :rofl:
OOOOooooohhhhh Thats Nice :drool:
Thanks mate :D
Theres something about that photo thats really good :tu:
Any chance you could replicate it with a 18year old blonde in a orange basque ?
:rofl:
With this face I'd struggle to replicate it with an 81 year old blonde in an orange knitted shawl ::)
-
Yeah, I saw the thread where you posted that you got new stuff. If you need help shoot me an email or PM :2tu:
Cheers mate :cheers: It's probably just a matter of playing with it and finding out where all the settings are. Knowing the theory and putting it into practice are two different things :rofl:
OOOOooooohhhhh Thats Nice :drool:
Thanks mate :D
Theres something about that photo thats really good :tu:
Any chance you could replicate it with a 18year old blonde in a orange basque ?
:rofl:
With this face I'd struggle to replicate it with an 81 year old blonde in an orange knitted shawl ::)
Damn , I didn't mean you , I thought you might have a nice little filly tucked away :rofl:
-
Hold the phone. There is a BO/Orange Fuse. :think:
-
Hold the phone. There is a BO/Orange Fuse. :think:
Well .... kind of a DIY version :P (Check the Mod Squad Forum ;) )
-
Camo Fuse from Ashley :drool:
-
Hold the phone. There is a BO/Orange Fuse. :think:
Well .... kind of a DIY version :P (Check the Mod Squad Forum ;) )
Ahhh.... ok. :cheers:
-
It be PIMPED mofos :D :D
(http://i291.photobucket.com/albums/ll287/multimat426/Gold%20Leatherman/SAM_1441_zpsdb682d23.jpg)
It is going to replace the Vic Classic on my work keys & I will see how well Texas Tool Craft's wonder gold plating holds up to use :think: :think:
I am going to walk around threatening to put a cap in people's arses with this bad boy in my pocket >:D. Beer cap or Coke cap though :think: :P :D
-
Nice. :tu:
-
I have an original Super Tool that has a broken pliers.. I'm going to Portland next week and I'll swing by the Leatherman factory to swap it for a Super Tool 300.
-
My new Crater BO and Brewzer....(http://i1205.photobucket.com/albums/bb437/kmanct3/9417B8FA-CAE0-4482-A9C9-9ECC9D1947F4-7242-000001FF3077ABE6.jpg)
-
A new LM Squirt PS4! and I'm loving it so far.
Can't seem to post pics. can anyone tell me if there is abetter/faster way?
Cheers
-
A new LM Squirt PS4! and I'm loving it so far.
Can't seem to post pics. can anyone tell me if there is abetter/faster way?
Cheers
Welcome to the forum :salute:
Most of us use a picture hosting service like photobucket.com You upload the pics there and post them as img links.
-
:mail:
(http://i1270.photobucket.com/albums/jj607/armee-suisse/8C3F0003-E1BF-4299-849E-DAE8D15DE18B-606-0000010AC89C7A2D.jpg)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/F6708643-63F5-4497-A3DC-A0C250B97C16-606-0000010B66686E5E.jpg)
-
I got myself a Rebar at Dick's sporting goods for $49. I love it. Not too big. I'd love to see a slimmed down Rebar w/o file and serated blade as the new "PST".
-
Thanks
A new LM Squirt PS4! and I'm loving it so far.
Can't seem to post pics. can anyone tell me if there is abetter/faster way?
Cheers
Welcome to the forum :salute:
Most of us use a picture hosting service like photobucket.com You upload the pics there and post them as img links.
-
(http://i1270.photobucket.com/albums/jj607/armee-suisse/AFFB2BCD-3C33-429D-9974-00C2E8079F5D-841-0000013FBD754BA6.jpg)
-
:mail:
(http://i1270.photobucket.com/albums/jj607/armee-suisse/8C3F0003-E1BF-4299-849E-DAE8D15DE18B-606-0000010AC89C7A2D.jpg)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/F6708643-63F5-4497-A3DC-A0C250B97C16-606-0000010B66686E5E.jpg)
I hate to say it since we are in my Leatherman thread, but I rather know what's in the Spyderco boxes. :facepalm:
-
I just noticed I started this thread over a year ago. The time flies when your........uh, buying multitools. :ahhh
-
Have my eyes set on a Rebar....
Sent from my iPad using Tapatalk HD
-
I hate to say it since we are in my Leatherman thread, but I rather know what's in the Spyderco boxes. :facepalm:
I posted them in the "Edged Tools" forum: What's your latest folder? ;)
http://forum.multitool.org/index.php/topic,35408.msg666988.html#msg666988
-
Have my eyes set on a Rebar....
Sent from my iPad using Tapatalk HD
My latest acquisition is an old Leatherman multitool of the original design. It didn't come with the leather sheath, and I don't know it's exact age.
My favorite everyday carry is a Charge TTI. I keep a Surge in the car, and I keep a Wenger 580 on my keychain.
-
Juice S2 for me :tu:
-
Grey XE6 :)
-
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/IMG_20130102_190008.jpg)
BO ALX
-
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/IMG_20130102_190008.jpg)
BO ALX
:drool:
-
I don't have anything in tactical black or "gunblack" as I call it. It seems like it might show scratches more easily, become harder to find if lost, and I worry about blackening my hands, as it did when I used to blacken my own handmade tools with a yellow acetylene flame years ago. I'm sure it's it's a much more stable finish nowadays, but I'd still choose a metallic finish any day.
-
I don't have anything in tactical black or "gunblack" as I call it. It seems like it might show scratches more easily, become harder to find if lost, and I worry about blackening my hands, as it did when I used to blacken my own handmade tools with a yellow acetylene flame years ago. I'm sure it's it's a much more stable finish nowadays, but I'd still choose a metallic finish any day.
Black Oxide is actually a great feature. When done right it will not come off on your hands. I have carried a BO Wave for a while now and it never made my hands black, and despite my best efforts I can't seem to really put a scratch in it. It is showing wear over time but I think worn BO tools are 8)
To top it all off, I don't have any annoying surface rust on my Wave like a lot of Leatherman tools get.
-
Agreed - it does seem to minimise rust on some tools.
I have an old BO Ti which looks worn but is still in great shape :tu:
-
XE6
-
Have my eyes set on a Rebar....
Sent from my iPad using Tapatalk HD
My latest acquisition is an old Leatherman multitool of the original design. It didn't come with the leather sheath, and I don't know it's exact age.
My favorite everyday carry is a Charge TTI. I keep a Surge in the car, and I keep a Wenger 580 on my keychain.
if you have a look at the PST chronology thread you should be able to work out a rough age if you are interested. :)
http://forum.multitool.org/index.php/topic,5877.0.html
-
My wife wanted a multitool like mine for her SWAT bag (she's a SWAT dispatcher) so I got her a Wingman. It also came with Style CS. I got myself a Sidekick to add to the collection.
-
Just got a LM crunch new no box with brown leather sheath. I'm not a fan of many multis, but I really like the locking pliers. Also got, from eBay gift card, a BO rebar. It didnt live long enough for pics because as soon as it came I tore it apart for those plier head and awl. I'll get some pics of the crunch though ;)
-
Just scored a super cheap BO Surge off a certain classifieds website for £30!!!
-
I just a Leatherman 831612 Style PS. I keep on my key chain. Its small and has tweezers.
I work as a machinist so tweezers comes in handy to pull metal splinters out of my fingers.
-
Original Supertool, no sheath. Snagged off ebay for a steal because the seller labelled it wrong.
-
Whole bunch of PSTs when I wanted to learn how MTS worked. They were grungy, broken and I learned lot.
-
I just got a Rebar. Overall, I'm impressed. Much more so that I was with the Blast.
I kind of expected a better file and some scissors, but I guess you can't have everything. I'll be more impressed when my Kick pocket clips arrive, so I can take the Rebar apart and smooth out the fit. The tools and pliers are far too hard open, right out of the box.
--
sent via carrier pigeon from my secret hideout
'Buzz
-
My latest acquisition is an old Leatherman multitool of the original design. It didn't come with the leather sheath, and I don't know it's exact age.
My favorite everyday carry is a Charge TTI. I keep a Surge in the car, and I keep a Wenger 580 on my keychain.
Does it have the date stamp on the inside of the handle? I'm not sure when they started the date stamping but it had to be in the late 80s or early 90s IIR.
*edit- Looks like the chronology project thread shows November 92 the date codes were added. So, if you have no date codes, it may be pre-92? :think:
-
Whole bunch of PSTs when I wanted to learn how MTS worked. They were grungy, broken and I learned lot.
Eric,I don't know why,but that sounded very sinister
-
Whole bunch of PSTs when I wanted to learn how MTS worked. They were grungy, broken and I learned lot.
Eric,I don't know why,but that sounded very sinister
(http://images.wikia.com/uncyclopedia/images/archive/e/e0/20110325211906!Mad-scientist.jpg)
:D :D
-
:rofl:
-
Whole bunch of PSTs when I wanted to learn how MTS worked. They were grungy, broken and I learned lot.
Eric,I don't know why,but that sounded very sinister
Pretty much what I did. Look where it got me!
-
I just picked up the Leatherman Rebar in all black. I'm loving it8)
-
I just picked up the Leatherman Rebar in all black. I'm loving it8)
My latest is the Rebar as well, although I got it a few months ago and it's the stainless steel version. I would have liked the black though, but didn't go for it this time. I too am loving it. It's very versatile and is a good pocket carry size. :tu:
-
Black oxide Wave. Good enough to push a Spirit X off my belt, so pretty doggone good.
-
These arrived today. I'm quite impressed, so far. Much better fit and finish than I'm used to seeing from Leatherman. The designs are pretty cool too. Very usable, yet very light in weight.
(http://i784.photobucket.com/albums/yy124/Almost_Green_Guy/Temp/20130108_150216.jpg)
(http://i784.photobucket.com/albums/yy124/Almost_Green_Guy/Temp/20130108_150620.jpg)
--
sent via carrier pigeon from my secret hideout
'Buzz
-
They do look good together :)
-
I forgot how black the CX is when new. Mine is all worn in. :D You'll like it.
-
They do look good together :)
(https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcR9vMNgErTQEOEzsNONWY4MxcbxHKSxAjif6cxk6BL1o-bsqOcB)
-
I've had a wave for a while, but today I ordered a supertool 300 and a squirt es4. Hopefully they get here soon :)
-
They do look good together :)
(https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcR9vMNgErTQEOEzsNONWY4MxcbxHKSxAjif6cxk6BL1o-bsqOcB)
That's not a reply I'd expect! They do though... :)
-
TTi right now but looking for a decently priced micra
(http://img.tapatalk.com/d/13/01/09/zaqudyjy.jpg)
-
Micras are fairly cheap. I got one used for 10$
-
Micras are fairly cheap. I got one used for 10$
sweet!
-
I picked up an unused PST with sheath for $20 at a pawn shop.
-
I have an unopened 1997 PST II coming in the mail. I can't wait :gimme:
-
Nice score. I use mine as it actually has the right basic tools for my preferred EDC! :)
-
Nice score. I use mine as it actually has the right basic tools for my preferred EDC! :)
Yeah, I really wanted one of the PST's, and this one has the diamond file, which even has the hook sharpener (I thought that was neat). I was also interested in the old school scissors as well. Overall, I wanted to have one of the more old school original, classic styles to handle and enjoy. I really like the classic look, and overall do not mind tools being on the inside as that means they are secure and protected. And as an added bonus (and part of the reason I ended up getting this one), it is from the year I graduated high school, so that's kind of neat to me :D
-
^ Extra cool points then :tu:
-
There's nothing like the classic look and feel of the older Leatherman models. :tu:
-
^ Extra cool points then :tu:
There's nothing like the classic look and feel of the older Leatherman models. :tu:
Yup :D I wish I had been introduced to Leathermans back when I was that age or younger so that I could now have one that I could say I have had for like 20 years and have that history. Now I'll have to wait until I'm an old man to be able to say anything like that :)
-
I've had my sideclip for 11 years and my first Vic classic for 21 years.
-
Well in 2032 when I'm 54 (not really an old man I guess ::)), I can claim to have had some multitools/SAKs for 20 years :cheers:
-
It's cool to have a tool for a looong time and use the hell out of it, then look back fondly at how much you have gone through with it and survived because of it. My sideclip and classic will always hold special meaning to me because of that.
On topic, I got a Leatherman freestyle the other day, and I just pulled the trigger on a BO blast with Cap crimper and a new micra.
-
I've been on a roll. I picked up a BO Wave, Squirt PS4 and a Style PS yesterday.
The BO Wave is to take the place of the regular Wave I kept in my backpack. It was a great tool, but I just had too many rust problems with it. Hopefully, the black oxide coating will prevent the rust.
The Style PS and Squirt PS are both in the running for my new fishing vest multitool. It needs to cut fishing line and remove hooks from sunfish and trout. I have a feeling that the Style PS, with its superior fit and finish, better retention system, and larger scissors, will get the nod.
--
sent via carrier pigeon from my secret hideout
'Buzz
-
As of about 15 minutes ago, my brand spanking new 0997 PST II! :woohoo:
This tool is a thing of beauty :cry:
It even says "Leatherman USA" on the pliers and knife tang, which is cool :tu:
I wish I could post pics, but I'm at work right now. Plus, I don't have the means to do so at home either, unfortunately. I've tried posting pics before, but I kept getting told that the file size was too big or something along those lines, so I'm not sure what to do. I was doing it from my wife's smartphone (I don't have my own yet). Does the Tapatalk app fix this perhaps?
I'm very impressed with it though :salute: It's too bad the tools don't lock, but as a positive side to that, it makes the ruler nicer as it's not obstructed by the locking mechanism/release buttons. Nice sleek, classic look that I love :D :drool:
-
As of about 15 minutes ago, my brand spanking new 0997 PST II! :woohoo:
This tool is a thing of beauty :cry:
It even says "Leatherman USA" on the pliers and knife tang, which is cool :tu:
I wish I could post pics, but I'm at work right now. Plus, I don't have the means to do so at home either, unfortunately. I've tried posting pics before, but I kept getting told that the file size was too big or something along those lines, so I'm not sure what to do. I was doing it from my wife's smartphone (I don't have my own yet). Does the Tapatalk app fix this perhaps?
I'm very impressed with it though :salute: It's too bad the tools don't lock, but as a positive side to that, it makes the ruler nicer as it's not obstructed by the locking mechanism/release buttons. Nice sleek, classic look that I love :D :drool:
Tapatalk does solve the problem, it is the way to go for pic's.
-
I've been on a roll. I picked up a BO Wave, Squirt PS4 and a Style PS yesterday.
The BO Wave is to take the place of the regular Wave I kept in my backpack. It was a great tool, but I just had too many rust problems with it. Hopefully, the black oxide coating will prevent the rust.
The Style PS and Squirt PS are both in the running for my new fishing vest multitool. It needs to cut fishing line and remove hooks from sunfish and trout. I have a feeling that the Style PS, with its superior fit and finish, better retention system, and larger scissors, will get the nod.
--
sent via carrier pigeon from my secret hideout
'Buzz
I'd totally agree with using any of those for fishing, The size and weight is just about right, but remember to tether it to yourself with a cord.
-
As of about 15 minutes ago, my brand spanking new 0997 PST II! :woohoo:
This tool is a thing of beauty :cry:
It even says "Leatherman USA" on the pliers and knife tang, which is cool :tu:
I wish I could post pics, but I'm at work right now. Plus, I don't have the means to do so at home either, unfortunately. I've tried posting pics before, but I kept getting told that the file size was too big or something along those lines, so I'm not sure what to do. I was doing it from my wife's smartphone (I don't have my own yet). Does the Tapatalk app fix this perhaps?
I'm very impressed with it though :salute: It's too bad the tools don't lock, but as a positive side to that, it makes the ruler nicer as it's not obstructed by the locking mechanism/release buttons. Nice sleek, classic look that I love :D :drool:
Tapatalk does solve the problem, it is the way to go for pic's.
Oh good then, I will have to see if I can sneak that app onto my wife's phone. >:D In a few months (when I'm due for upgrade availability) I hope to have my own. Thanks for the info man :salute:
-
I forgot to mention the sheath. It's very nice, black with "Leatherman" in gold print, and a snap closure. It's very stiff though, but not a surprise considering it's been sitting in the package for 15+ years until now ;) It looks like it would possibly ride a little high for my lovehandle's liking ::), but I don't sheath carry anyway, so it will just go with my collection of sheaths I've accumulated.
-
I'd totally agree with using any of those for fishing, The size and weight is just about right, but remember to tether it to yourself with a cord.
Yep. I'm looking to use maybe one of these on the d-ring on my fishing vest.
-
I also want to mention another point about my new PST II. It is as thin as my alox Pioneer Rancher, which is something when you consider all the tools within the PST II. Very slim, yet packs considerable versatility when factoring size and weight.
Man, I'm loving this thing :drool: I know it is sort of "primitive" in comparison to my Rebar, Charge and Spirit, but it's a classic beauty and is still a very functional multitool. :cheers: :tu:
-
There is something to the older full-sized Leathermans, that the newer models cannot reproduce. The old PST and PST2 were thin and light enough for even the most finicky person to pocket carry. The day that locks were added to Leathermans, this aspect was pretty much lost.
The Pulse is close, but not quite like the non-locking models.
-
I think the PST II is rather lovely too... my favourite of the early LM tools. :tu:
-
Yeah, there's just something about it. The smooth, classic, simple yet functional design is just something that I can't stop admiring :D I honestly don't thing I've admired or been this excited about/proud of any of my other multitools/SAKs.
While I do prefer locking blades/tools, I can't say that it's always a necessity for my uses. I don't put them through any real heavy/hard use, so for the most part, locks aren't essential IMO of course :)
I definitely plan on posting pics as soon as I have the capability to do so (not sure when exactly that will be though :-[)
-
Yep. I'm looking to use maybe one of these on the d-ring on my fishing vest.
That's a pretty cool contraption. I've seen these tons of times but just didn't know what they did :think: Didn't realize it was retractable until I went to the Maxped site.
-
Another point on the PST II (sorry about all the posts-I'm excited :D). It says "LEATHERMAN TOOL" and not "LEATHERMAN PST II" as the pic on the Leatherman site displays. Just curious as to why that is. I know the PST went through several minor changes over the years, and I'm sure it's possible the PST II did as well.
Also, the "font" or whatever is different on each side. Most noticeably the letters with round edges. For example, the "O"s on the back side are a sort of hexagonal style instead of simply oval. Not sure why that is either.
One more: the back side "LEATHERMAN TOOL" has a slight hiccup of bit or extra space between the "T" and "H" so that it looks almost like "LEAT HERMAN TOOL". The space isn't quite that bad, but it is noticeable. All non-issues though ;)
-
There's a PST timeline thread which might help - quite a few oddities along the way IIRC.
If there's any place you get to go on about the minutia of a specific tool, MTO it is... rave on :tu:
-
There's a PST timeline thread which might help - quite a few oddities along the way IIRC.
If there's any place you get to go on about the minutia of a specific tool, MTO it is... rave on :tu:
I saw that earlier and posted a question asking if the PST II is included in the project or if it was just the PST exclusively, but have not heard back yet. That's where I saw the long list of changes the PST underwent over the years.
Yeah, I have read many topics/posts here and figured I was in good company :salute: :cheers:
-
Congrats on the PST II. I got one this summer from Sazabi, and I love it! It's been my most carried Leatherman for a while now. :tu: I think it'll see some belt time tomorrow.....
-
Congrats on the PST II. I got one this summer from Sazabi, and I love it! It's been my most carried Leatherman for a while now. :tu: I think it'll see some belt time tomorrow.....
Thanks man :salute: Yeah it's awesome. I love that diamond file. The only thing it's missing is the awl. I love the design of those scissors, but I carry a SAK that covers scissors, so I would rather have the awl. I may consider filing down the medium flathead to an awl, and then I'll be "awl" set :rofl: Sorry, couldn't resist ::)
-
Got this SC2 the other day. :)
-
:drool:
-
I'm also amazed at the beefiness of the PST II scissors. They sort of remind me of Micra scissors, and look and feel like they could do some serious cutting. After seeing them in person, the modern Leatherman scissors on the Charges, etc. seem kind of....well, wimpy I guess. Now are these the same type of scissors used on the original Wave?
-
I got a Pulse the other day when I checked the :mail: It came in as November's donation draw prize along with my Charter Member kit :tu: The Pulse will go to the mrs as I promised her a new tool since I gave the MP600 away that she used around the house. :salute: :D
Sent from Endor using Schlapatok
-
Just got the Wingman/Style CS combo pack.
I traded away a Wingman some months back, but decided at this price, it was worth getting again.
-
...and just got a Juice CS4 (and Crater c33x) from a trade. Digging both. :tu:
-
This isn't actually new to me. It's more that it took an extended vacation and is now back home. :)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1415.jpg)
Supertool 200. I still need to get an ST300 to complete the family.....
-
What do you think about the locking system on the ST200 Tom? I'm still trying to get use to it on the Pulse but it belongs to the mrs so I don't get to play with it much :think: :rofl: She won't share!¡! :rant: :rofl: :rofl: : rofl:
Sent from Endor using Schlapatok
-
Just scored a Pulse today, for $35, in "good" condition, not excellent.
-
Scored a sweet PST with a bit adapter last night.
-
Just scored a Pulse today, for $35, in "good" condition, not excellent.
Actually, once i got it cleaned up, it's "very good" condition.
-
What do you think about the locking system on the ST200 Tom? I'm still trying to get use to it on the Pulse but it belongs to the mrs so I don't get to play with it much :think: :rofl: She won't share!¡! :rant: :rofl: :rofl: : rofl:
Sent from Endor using Schlapatok
It certainly is different. I don't mind it really, I think it's a bit easier than the locks on the original Supertool. Not sure if it's the locks or that the tool just needs some oil, but deployment is a bit stiff. I'm oiling it right now, we shall see.
-
It certainly is different. I don't mind it really, I think it's a bit easier than the locks on the original Supertool. Not sure if it's the locks or that the tool just needs some oil, but deployment is a bit stiff. I'm oiling it right now, we shall see.
Yeah, that one sure was the bugger!¡!
Sent from Endor using Schlapatok
-
This isn't actually new to me. It's more that it took an extended vacation and is now back home. :)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1415.jpg)
Supertool 200. I still need to get an ST300 to complete the family.....
Nice one :tu: I love that classic style of the older Leathermans :salute:
-
Scored a sweet PST with a bit adapter last night.
Nice score :tu: I recently got a PST II and love it :D
-
Pulses, PST's, PST II's, Supertool 200's....a whole load of classics gents and all still very good tools IMO. :tu: I on the other hand have just got my hands on one of LMs newer offerings: a Sidekick. So far I am OK with it and haven't felt the urge to throw it away. ;)
-
With the sliding thumb locks, if they fail for some reason the lock still works, you can use it like the original. If the lock pings off a core, st300 or rebar, they're left pretty much unusable! Also the mechanism gives you a bit of extra grip on the tool. For these reasons I think this form of lock is great!
-
So, I just received my replacement Wave and it has a couple issues itself. On of them is the driver not having a large enough slot for the lock to really engage, which I fixed with the broken wave's file (without dissembling it!). The second issue is the bolt-screws that hold the blades on which rotate with my serrated blade. Does this just go away over time?
-
So, I just received my replacement Wave and it has a couple issues itself. On of them is the driver not having a large enough slot for the lock to really engage, which I fixed with the broken wave's file (without dissembling it!). The second issue is the bolt-screws that hold the blades on which rotate with my serrated blade. Does this just go away over time?
I'm not sure about that - having to immediately mod your own tool to get it working doesn't sound good :-\
Is it worth sending it back again?!
-
A whole bunch squirts to take apart :)
Also, a Juice CS4 to mod into a modern Flair.
-
Grey Squirt P4 from Dunc
-
Grey Squirt P4 from Dunc
what happened to "I'm not going to buy anymore leathermans now !" eh John? :whistle:
i must admit i was tempted by that Squirt by Dunc, VERY tempted , he does know how to make offers you can't refuse ! i was about to crack , so you've save me ! this time ::)
Duncan is a star,nice bloke/great seller, but my wife hates him :rofl:
-
Grey Squirt P4 from Dunc
what happened to "I'm not going to buy anymore leathermans now !" eh John? :whistle:
i must admit i was tempted by that Squirt by Dunc, VERY tempted , he does know how to make offers you can't refuse ! i was about to crack , so you've save me ! this time ::)
Duncan is a star,nice bloke/great seller, but my wife hates him :rofl:
Look,listen here TD,I've only bought two LMs since I said that :whistle:
-
I salute your control :salute:
-
I'm saving my uncanny powers to do a SAK mod next month :ahhh
-
that sounds interesting , do tell ?
is it your first time?
-
A gentleman never tells :D
Not my first,but I'm going down that well trodden route of a Yeoman type mod
-
Haven't bought one yet, but I am really considering a Rebar...
-
Haven't bought one yet, but I am really considering a Rebar...
The Rebar is one of my favorites. :tu:
-
A whole bunch squirts to take apart :)
Also, a Juice CS4 to mod into a modern Flair.
:ahhh :ahhh :ahhh :ahhh :ahhh
-
Three more acquisitions today; a Kick, a Fuse and a Core, all for $100 and in very good condition.
-
Three more acquisitions today; a Kick, a Fuse and a Core, all for $100 and in very good condition.
Nice score :tu:
-
Three more acquisitions today; a Kick, a Fuse and a Core, all for $100 and in very good condition.
Nice score Landrew :tu: I think your image may be a bit small :think:
:rofl: :rofl: :rofl: :rofl: :rofl:
-
Three more acquisitions today; a Kick, a Fuse and a Core, all for $100 and in very good condition.
Nice score Landrew :tu: I think your image may be a bit small :think:
:rofl: :rofl: :rofl: :rofl: :rofl:
I'm still learning, not sure how to resize, but when you click on it, it zooms large.
-
The original pic is too big - don't try and upload anything wider than about 800 pixels and it will be fine.
-
A whole bunch squirts to take apart :)
Also, a Juice CS4 to mod into a modern Flair.
:ahhh :ahhh :ahhh :ahhh :ahhh
Like this!
(http://img.tapatalk.com/d/13/01/23/5ana2yre.jpg)
(http://img.tapatalk.com/d/13/01/23/vuhapeda.jpg)
(http://img.tapatalk.com/d/13/01/23/buva7yby.jpg)
(http://img.tapatalk.com/d/13/01/23/uhuhu2e7.jpg)
(http://img.tapatalk.com/d/13/01/23/y9eqema9.jpg)
Closed
(http://img.tapatalk.com/d/13/01/23/azy9umut.jpg)
Closed with awl
(http://img.tapatalk.com/d/13/01/23/jana7a7e.jpg)
-
Cool :tu: Nice job Metro :cheers:
-
That's it!¡! I really am digging the two prong fork!¡!
Sent from Endor using Schlapatok
-
Cool :tu: Nice job Metro :cheers:
I started a new thread in the Mod Squad.
That's it!¡! I really am digging the two prong fork!¡
Sent from Endor using Schlapatok
I call it The Forte! (I am going to see about making a pate knife.
-
Just got this in the mail today.
(http://i1156.photobucket.com/albums/p561/trouthunter7/2013-01-22125733_zps4bdc2231.jpg)
-
Just got this in the mail today.
(http://i1156.photobucket.com/albums/p561/trouthunter7/2013-01-22125733_zps4bdc2231.jpg)
Nice one :tu:
-
I call it The Forte! (I am going to see about making a pate knife.
I'd hit it!¡! :think:
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
-
Just got this in the mail today.
(http://i1156.photobucket.com/albums/p561/trouthunter7/2013-01-22125733_zps4bdc2231.jpg)
How is the tool adapter? Been thinking about picking one up for my Sideclip.
-
Bnib Surge dirt cheap! Score!
-
Just got this in the mail today.
(http://i1156.photobucket.com/albums/p561/trouthunter7/2013-01-22125733_zps4bdc2231.jpg)
How is the tool adapter? Been thinking about picking one up for my Sideclip.
I have found the Leatherman Bit Adapters easy to use. I also found that it allows me to use different bits when I need to.
-
Three more acquisitions today; a Kick, a Fuse and a Core, all for $100 and in very good condition.
Anyone got a spare Kick sideclip they want to part with?
-
I have Japanese made PST on its way. Looks like it is from around 1985 to 1989.
-
>:D Make that another PST. :angel:
-
The sidewing
(http://img.tapatalk.com/d/13/01/27/ru3a4a8u.jpg)
-
S2 red. :)
-
On Friday, I was lucky enough to receive a new/unused Juice Pro! Sorry no pics right now, try to post one tomorrow! :D
-
On Friday, I was lucky enough to receive a new/unused Juice Pro! Sorry no pics right now, try to post one tomorrow! :D
LUCKY!!! I'm waiting for my KF4 to get to my house.
-
I snagged a pulse off ebay for a steal. I can't really afford it but I gave my last one to my Dad so I couldn't resist.
-
On Friday, I was lucky enough to receive a new/unused Juice Pro! Sorry no pics right now, try to post one tomorrow! :D
LUCKY!!! I'm waiting for my KF4 to get to my house.
I was lucky enough to get one of those KF4's in mint condition a couple of weeks ago! :)
-
PST.. 8)
I'll add this in the cronology thread when I get the time..
-
Show off. :whistle:
Nice grab, that one. (http://i1255.photobucket.com/albums/hh627/enki_ck/Smiley/clap.gif)
-
PST.. 8)
I'll add this in the cronology thread when I get the time..
Oh, that reminds me. Could you also add it to the Leatherman show-off thread to bring it back on topic?
Some people ::) seem to have derailed it a bit for the last page or so. The :serverloft: :doh:
:D
-
Got my new XE6 today in a very sexy Thunder purple
-
Ohh, that is sexy!
Sent from my Galaxy Nexus using Tapatalk 2
-
This one is my latest. The Juice Pro. :D
-
Nice one, looks mint.
-
Got my new XE6 today in a very sexy Thunder purple
Glad you like it. I gifted my purple one to my brother, and bought a gray one for myself. He then gave it to his son who thinks purple is cool or something.
-
I saw a deal too good to pass up. I got the BO Wave for $30. It has broken scissors but I'm going to Portland to the Leatherman factory here pretty quick so doing a warrantee swap isn't going to be a problem.
-
I saw a deal too good to pass up. I got the BO Wave for $30. It has broken scissors but I'm going to Portland to the Leatherman factory here pretty quick so doing a warrantee swap isn't going to be a problem.
I won't tell Tim Leatherman you aren't the original owner. ;)
-
Nice one, looks mint.
Yeah, it is new without packaging so I probably paid more than I should have for it! :D
-
PST.. 8)
I'll add this in the cronology thread when I get the time..
Nice one :tu: Love the PST's :cheers:
-
PST.. 8)
I'll add this in the cronology thread when I get the time..
Not seen one with it's birth mark removed :o 8) 8) 8) 8)
(http://forum.multitool.org/index.php?action=dlattach;topic=33794.0;attach=43837;image)
-
PST.. 8)
I'll add this in the cronology thread when I get the time..
Not seen one with it's birth mark removed :o 8) 8) 8) 8)
(http://forum.multitool.org/index.php?action=dlattach;topic=33794.0;attach=43837;image)
And with CC.. :ahhh :ahhh
Be sure to check out the cronology thread in a minute... ;)
-
PST.. 8)
I'll add this in the cronology thread when I get the time..
Not seen one with it's birth mark removed :o 8) 8) 8) 8)
(http://forum.multitool.org/index.php?action=dlattach;topic=33794.0;attach=43837;image)
And with CC.. :ahhh :ahhh
Be sure to check out the cronology thread in a minute... ;)
I know I know the mighty rare satin CC PST + tattoo :o :o :gimme: :gimme: :D :D
-
PST.. 8)
I'll add this in the cronology thread when I get the time..
Not seen one with it's birth mark removed :o 8) 8) 8) 8)
(http://forum.multitool.org/index.php?action=dlattach;topic=33794.0;attach=43837;image)
And with CC.. :ahhh :ahhh
Be sure to check out the cronology thread in a minute... ;)
I know I know the mighty rare satin CC PST + tattoo :o :o :gimme: :gimme: :D :D
You better start filling this up then.. ;)
(https://www.eta.co.uk/wp-content/uploads/imported/images/Gigaliner%20small.jpg)
-
After an extended stay in Canada this lovely KF4 has made its way safely back to Oregon.
(http://i671.photobucket.com/albums/vv78/baja820/IMG_20130130_200509.jpg)
:tu:
-
Just received my Juice KF4 in the mail today. Brought it to work for a whole ten hour shift. I can't believe how much better I like it than my Xe6. Well I missed the scissors ???
-
Just received my Juice KF4 in the mail today. Brought it to work for a whole ten hour shift. I can't believe how much better I like it than my Xe6. Well I missed the scissors ???
I think I would really like the KF4, but I would miss the scissors as well. I would prefer to have those in place of the saw as I find scissors more useful than a saw on a MT of that size.
-
I was thinking the same thing about the KF4 and the scissors. I am going to get one soon and will pair it up with a S4 or Micra just for this reason.
-
I'm liking the CS4 for the scissors mostly. My XE6 was a little too bulky, and the scissors on that particular unit has quality control issues, even though they are the same design. I've always got my Charge for the heavier stuff anyway.
-
I was thinking the same thing about the KF4 and the scissors. I am going to get one soon and will pair it up with a S4 or Micra just for this reason.
That would be a good combo :tu: I've also been eyeing the Micra, but I currently can't purchase anymore MTs/SAKs as I'm trying to save up for a couple mods I want done.
-
I have tons of multis, but I just got my first wave. Now to get the pocket clip.
-
Today I received a PST with drilled out rivets.
(http://i1156.photobucket.com/albums/p561/trouthunter7/2013-02-01171245_zpsc2b3e53f.jpg)
(http://i1156.photobucket.com/albums/p561/trouthunter7/2013-02-01171257_zps08a9f315.jpg)
(http://i1156.photobucket.com/albums/p561/trouthunter7/2013-02-01171322_zpsac890529.jpg)
-
When I saw a pic of this ^ PST the other day I thought it looked like it had rivets but it has a USA plier head. With the added pics it is a riveted PST. Now we have a Japanese riveted Pocket Survival Tool with USA plier head. :think: :)
-
When I saw a pic of this PST the other day I thought it looked like it had rivets but it has a USA plier head. With the added pics it is a riveted PST. Now we have a Japanese riveted Pocket Survival Tool with USA plier head. :think: :)
Nice one.. :tu:
-
My latest...
(http://i1270.photobucket.com/albums/jj607/armee-suisse/94FF3C97-7AE5-4142-AB07-7C0A44692131-13241-00000C9CB31CA89D.jpg)
Skeletool CX PE x 2, Skeletool PE! :tu:
(http://i1270.photobucket.com/albums/jj607/armee-suisse/9B7C92DB-AEB5-41C8-BE98-CE62ED930A45-13241-00000C9CB8FF830F.jpg)
Charge TTI x 3 ::)
-
Today I received the yellow KF4 and blue CS4. Still waiting on the red C2.
-
(http://i1270.photobucket.com/albums/jj607/armee-suisse/CA88BAD3-F673-4FAA-8116-BB9352435816-13269-00000CA43BA4A762.jpg)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/3C46E7C6-87B5-4866-809E-E9B2ABA8CEA3-13269-00000CA2D70E4415.jpg)
Juice KF4 8)
-
Got 2LM bargains :
Style/Lenser V9 combo pack for £15 from Amazon
08/98 date tool adopter for £9 delivered from fleabay :D
-
Today I received the yellow KF4 and blue CS4. Still waiting on the red C2.
:mail:
(http://i1270.photobucket.com/albums/jj607/armee-suisse/C34498FE-3873-4A71-94FA-ECFE905FBF7E-13269-00000CA7A22ECC6D.jpg)
Red C2... :)
Also received the Camo Fuse and Blast from sir_mike and the Wave from JAfromMn. :salute:
(http://i1270.photobucket.com/albums/jj607/armee-suisse/AB38833F-8B2F-45FA-88DE-C4C78D85FF24-13269-00000CA7A8A68A8B.jpg)
:cheers:
-
error
-
Show off! :D What are you going to do with all those Leatherman's???
I should have my red one either tomorrow or Monday. You should give me a TTi! :drool:
Today I received the yellow KF4 and blue CS4. Still waiting on the red C2.
:mail:
(http://i1270.photobucket.com/albums/jj607/armee-suisse/C34498FE-3873-4A71-94FA-ECFE905FBF7E-13269-00000CA7A22ECC6D.jpg)
Red C2... :)
Also received the Camo Fuse and Blast from sir_mike and the Wave from JAfromMn. :salute:
(http://i1270.photobucket.com/albums/jj607/armee-suisse/AB38833F-8B2F-45FA-88DE-C4C78D85FF24-13269-00000CA7A8A68A8B.jpg)
:cheers:
-
:o
-
I really like the red C2 :drool:
-
I wish I never got rid of my Juice's. :facepalm:
-
On Saturday, I received the red Juice C2 that I was waiting on! :tu:
I still have an orange s2 due in but that one is my second one so not quite as exciting so I might have to trade it for a gray s2! :D
Still want a sc2 and a xe6. If anyone wants to trade some SAK's for one, let me know! :ahhh
-
I wish I never got rid of my Juice's. :facepalm:
That's what's holding me back from selling/trading mine. I only ever use one but the others are just part of the family and who am I to tear a family apart. :whistle:
-
I wish I never got rid of my Juice's. :facepalm:
That's what's holding me back from selling/trading mine. I only ever use one but the others are just part of the family and who am I to tear a family apart. :whistle:
You could trade them to me and I will put them in my Juice family, I promise! :cheers:
-
I just ordered the Rime carabiner(they were sold out of Hails). That design of carabiner is so wierd, it has no choice but to work!! :think:
-
I wish I never got rid of my Juice's. :facepalm:
That's what's holding me back from selling/trading mine. I only ever use one but the others are just part of the family and who am I to tear a family apart. :whistle:
Home wreckers are a bad look. :D
-
(http://i782.photobucket.com/albums/yy104/kirk130013/image_zps66fea061.jpg)
My latest LM arrivals,Style and Lenser V9 from Amazon,PS4 and larger Lenser from Grumpy,and my Christmas Pulse from Zoidberg.Tool adopter from ebay
-
[IMG]
My latest LM arrivals,Style and Lenser V9 from Amazon,PS4 and larger Lenser from Grumpy,and my Christmas Pulse from Zoidberg.Tool adopter from ebay
Very nice! I'll be looking for a Pulse also if I could find one new, nib for a good price. :tu:
-
BO Wave.
-
WHOOAAAAA!!
I have a Squirt S4 in the lot that is signed by Tim Leatherman!!!
(http://img.tapatalk.com/d/13/02/16/jyseme6y.jpg)
-
Quick, send it to me.. :pok: ;)
Very cool Eric.. 8)
-
Jackpot!!!!!
-
That's sweet!!!
-
Very cool Eric :tu: How did you score that one?
-
Very cool Eric :tu: How did you score that one?
I asked my supplier for her entire squirt inventory at cost and this was hidden in the bunch!
-
More pics together... :)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/73746DA4-45A6-4F5E-A353-1BC078793F98-260-0000003EC5F62193.jpg)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/5E517F63-D9B2-4326-9414-68388D5E29D8-260-0000003E52B5497C.jpg)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/E4DC7F78-47DE-443F-8748-A1741FBF22CF-260-0000003E4C0AD65A.jpg)
-
Nice! I really dig the news scales. And I am wanting a s30v blade for my wave :multi:
-
My Rebar arrived today :) Ordered it end of december last year :facepalm: I'm a happy man today :D
-
My Rebar arrived today :) Ordered it end of december last year :facepalm: I'm a happy man today :D
(http://img.tapatalk.com/d/13/02/17/aru3a4eb.jpg)
The Rebar's blade looks like it is folded out of the sak!
-
Silver sc2!
(http://img.tapatalk.com/d/13/02/17/u6yny5y6.jpg)
-
LOVE the Silver SC2. :tu:
-
LOVE the Silver SC2. :tu:
Yeah, me too... didn't know they were different to the the older grey ones (which I really like too).
-
I`m currently on a Leatherman shopping spree although I shouldn´t but I got this freestyle cs.
Also got an charge Xti and I have a Flair on the way.
Now I will have to eat cheap noodles for the rest of this month and perhaps the next.
-
I`m currently on a Leatherman shopping spree although I shouldn´t but I got this freestyle cs.
Also got an charge Xti and I have a Flair on the way.
Now I will have to eat cheap noodles for the rest of this month and perhaps the next.
Freestyle CX of course not CS
-
I`m currently on a Leatherman shopping spree although I shouldn´t but I got this freestyle cs.
Also got an charge Xti and I have a Flair on the way.
Now I will have to eat cheap noodles for the rest of this month and perhaps the next.
Freestyle CX of course not CS
Nice haul of retired LMs mate 8) 8) :tu: :tu: The Xti & Flair are getting tricky/expensive to nab :think: :think:
-
I`m currently on a Leatherman shopping spree although I shouldn´t but I got this freestyle cs.
Also got an charge Xti and I have a Flair on the way.
Now I will have to eat cheap noodles for the rest of this month and perhaps the next.
Freestyle CX of course not CS
Nice haul of retired LMs mate 8) 8) :tu: :tu: The Xti & Flair are getting tricky/expensive to nab :think: :think:
The Freestyle an Charge were at a reasonable price for this part of the world but the Flair was really expensive.
But that odd bird has been on my wishlist since i started lurking around this forum and discovered it.
I´m really looking forward to get it.
:drool:
-
Hi Everyone,
I'm new to the forum and just wanted to share with everyone the latest LM I picked up tonight! It brand new, never been used Leatherman PST. Came with original box and all the original documentation. The sheath and printed lettering on it looks flawless. Nothing really special but I thought I would share anyways!
Cheers,
CB
-
Welcome to MT.O! :salute: Nice PST. what's the date stamp inside the handles say?
-
Welcome to MT.O! :salute: Nice PST. what's the date stamp inside the handles say?
1200
-
December 2000. Nice vintage. So how did you get a thirteen year old PST that has never been used?
-
Hey guys,
Just picked up a Charge with a date stamp of 0404 from a pal for $30. It was a great addition to my small but growing Leatherman collection.
-
Hi Everyone,
I'm new to the forum and just wanted to share with everyone the latest LM I picked up tonight! It brand new, never been used Leatherman PST. Came with original box and all the original documentation. The sheath and printed lettering on it looks flawless. Nothing really special but I thought I would share anyways!
Cheers,
CB
Oh it is something special when you get something like a brand new PST! I recently bought a brand new PSTII (date stamp 0997) in its unopened blister pack and I fell right in love with it :D Welcome to the forum by the way :cheers:
-
Hey guys,
Just picked up a Charge with a date stamp of 0404 from a pal for $30. It was a great addition to my small but growing Leatherman collection.
Welcome to the forum :cheers: What kind of Charge is it? Sounds like a good deal as long as your buddy took good care of it :tu:
-
Welcome to the forum, guys. :cheers: And some nice tools you got there too. :D
-
Hey guys,
Just picked up a Charge with a date stamp of 0404 from a pal for $30. It was a great addition to my small but growing Leatherman collection.
Welcome to the forum :cheers: What kind of Charge is it? Sounds like a good deal as long as your buddy took good care of it :tu:
I believe it's a Charge Ti. It's in good shape and will clean up nice.
-
I'm the proud owner of a brand new REBAR :D
-
(http://img.tapatalk.com/d/13/02/22/aje3u6y3.jpg)
My new Surge. Been wanting one for awhile and got a great deal on this one. I traded a cheap used car radio amplifier for this brand new in the package, with a belt clip. I love great deals.
NOTErized!
-
December 2000. Nice vintage. So how did you get a thirteen year old PST that has never been used?
Long story short I got a bit lucky on this one. I bought it from a guy on a buy / sell / trade forum. I asked him if he could share the history of this PST and he said he received it as a gift for working as a long time technical trainer with a well known North American auto manufacture. He said he never really believed in MTs so it just sat there untouched for all these years. What you don't see in the picture is on the other side of the tool there is an engraving of the auto manufacture name / logo. I love it when I find a nice tool and with it comes an interesting story.
-
I'm the proud owner of a brand new REBAR :D
Congrats man :cheers: I love the Rebar :tu:
-
I finally got a BO tool! A brand new looking Super Tool 200, for $20 from our airport chapel sale. It doesn't look like this has been used at all. No marks on any of the tool, or the pliers.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/IMG_20130222_105714_zpse2694733.jpg)
-
I finally got a BO tool! A brand new looking Super Tool 200, for $20 from our airport chapel sale. It doesn't look like this has been used at all. No marks on any of the tool, or the pliers.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/IMG_20130222_105714_zpse2694733.jpg)
Whoa, Score Dude.. :salute:
I'll give you 40 on the spot.. ;)
-
My care package from SAKnight arrived:Mini,PST,and original Supertool!
Been my biggest ever month for LMs,Pulse,Style,Squirt PS4,now these!
-
My Rime carabiner has arrived. After fondling this thing for a few minutes. This carabiner definately has potential. Especially if you into one piece keyring tools. For example, with an upcoming rain-snow-sleet front coming this way. I get to try out the scraper on my car windows. Among other possiblities. :think:
Unlike some nay-sayers. I think making this was a wise move on Leatherman's part :tu:
-
Hey guys,
Just picked up a Charge with a date stamp of 0404 from a pal for $30. It was a great addition to my small but growing Leatherman collection.
Welcome to the forum :cheers: What kind of Charge is it? Sounds like a good deal as long as your buddy took good care of it :tu:
I believe it's a Charge Ti. It's in good shape and will clean up nice.
That's cool :tu: Enjoy :cheers:
-
penultimate squirt!!
(http://img.tapatalk.com/d/13/02/23/a7e4yseh.jpg)
(http://img.tapatalk.com/d/13/02/23/ane6a4yd.jpg)
(http://img.tapatalk.com/d/13/02/23/u7a8ygaz.jpg)
(http://img.tapatalk.com/d/13/02/23/e6unaga2.jpg)
-
Nothing special, but they're the newest pliers-based members of the family. :) Wave and Sidekick.
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1535_zps013db650.jpg)
The Wave is sweet. For whatever reason I got rid of my first one pretty quickly, and didn't really have a chance to give it a shot. The pocket clip on this one makes it even more useful to me. :tu: The Sidekick? Not bad, not a Wave for sure. If I find a Wingman for a decent price I'm going to be swapping some parts between the two.
-
penultimate squirt!!
(http://img.tapatalk.com/d/13/02/23/ane6a4yd.jpg)
Metro..that Squirt really mean business.... :tu: :tu:
and a neat BO St200...nice haul... :tu:
I finally got a BO tool! A brand new looking Super Tool 200, for $20 from our airport chapel sale. It doesn't look like this has been used at all. No marks on any of the tool, or the pliers.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/IMG_20130222_105714_zpse2694733.jpg)
-
Nothing special, but they're the newest pliers-based members of the family. :) Wave and Sidekick.
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1535_zps013db650.jpg)
The Wave is sweet. For whatever reason I got rid of my first one pretty quickly, and didn't really have a chance to give it a shot. The pocket clip on this one makes it even more useful to me. :tu: The Sidekick? Not bad, not a Wave for sure. If I find a Wingman for a decent price I'm going to be swapping some parts between the two.
That may be worth doing Tom. Which tools would you swap? I would swap the CE knife for the PE and that's about it for me :think:
-
Yeah, that would be pretty much what I'd do too. Don't really need the saw of the small serrated blade. The scissors and package opener would be more useful to me. I did have a Wingman for a while when it first was released, and got along with it OK. Gifted it to a friend who loves it.
-
Metro..that Squirt really mean business.... :tu: :tu:
It gets better! HEX DRIVER SCALES!
(http://img.tapatalk.com/d/13/02/23/yvynepyv.jpg)
(http://img.tapatalk.com/d/13/02/23/hyvaqy8e.jpg)
(http://img.tapatalk.com/d/13/02/23/9ygaru7u.jpg)
(http://img.tapatalk.com/d/13/02/23/nyre7y6u.jpg)
-
Man Metro, you are a whiz with those Squirts :salute: :tu:
-
My care package from SAKnight arrived:Mini,PST,and original Supertool!
Been my biggest ever month for LMs,Pulse,Style,Squirt PS4,now these!
I finally got a BO tool! A brand new looking Super Tool 200, for $20 from our airport chapel sale. It doesn't look like this has been used at all. No marks on any of the tool, or the pliers.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/IMG_20130222_105714_zpse2694733.jpg)
Nice collection of scores guys :tu: Enjoy :cheers:
-
The driver is brilliant!¡!
-
Metro..that Squirt really mean business.... :tu: :tu:
It gets better! HEX DRIVER SCALES!
(http://img.tapatalk.com/d/13/02/23/nyre7y6u.jpg)
Now that's cool, and you get a lot of torque that way. :tu:
-
Metro..that Squirt really mean business.... :tu: :tu:
It gets better! HEX DRIVER SCALES!
(http://img.tapatalk.com/d/13/02/23/yvynepyv.jpg)
That's really a Super Squirt... :salute: again
It should be 'trademarked Metro Super Squirt'.... ;)
-
Metro..that Squirt really mean business.... :tu: :tu:
It gets better! HEX DRIVER SCALES!
(http://img.tapatalk.com/d/13/02/23/yvynepyv.jpg)
(http://img.tapatalk.com/d/13/02/23/hyvaqy8e.jpg)
(http://img.tapatalk.com/d/13/02/23/9ygaru7u.jpg)
(http://img.tapatalk.com/d/13/02/23/nyre7y6u.jpg)
Now that is cool!!!
-
In the mail today is a couple of different PST's and PST II's. And a SideClip. The SideClip will need to go in for service though. Broken Blade.
-
In the mail today is a couple of different PST's and PST II's. And a SideClip. The SideClip will need to go in for service though. Broken Blade.
Nice score! Been hunting for a SideClip myself. :tu:
-
Yesterday morning this bue S2 came in the :mail: I sure do like it! :D
-
I have my first flair on its way
-
Yesterday morning this bue S2 came in the :mail: I sure do like it! :D
Now that's cool. 8)
-
Just ordered a Juice PS4, Charge ALX, and Crunch....(mostly bday gifts from others). I am done....no more...
-
Just ordered a Juice PS4, Charge ALX, and Crunch....(mostly bday gifts from others). I am done....no more...
So you say....for now :whistle: Mwahahahahahahaaaaa >:D
-
A Wingman and a Supertool300 arrived this morning!
-
I have my first flair on its way
Me too! :D
-
Just ordered a Juice PS4, Charge ALX, and Crunch....(mostly bday gifts from others). I am done....no more...
I said that not too long ago, then I bought a BO ST200 and a Vic Climber :facepalm:
-
My latest Leatherman is OHT. Via Americanexport.
-
My latest Leatherman is OHT. Via Americanexport.
I keep waiting for the OHT to show up on Amazon just to see the price, but no luck lately. This will probably be my next purchase. Let us know how you like it
-
Crud cell pic of my newest.
(http://i603.photobucket.com/albums/tt115/NBknife/100_4367_zpsc10c92b3.jpg)
-
^That's pretty sweet!!
Here are what arrived for me today...
(http://i1199.photobucket.com/albums/aa479/intheface11/photo1_zpsea3301a3.jpg)
-
That's a nice little haul there Stang! :tu:
-
Very nice haul indeed. :tu:
-
My latest Leatherman will be the red Micra I just ordered. It will pair nicely with my black Alox Pioneer for an effective EDC combo :tu:
-
After taking a break from this forum, I promptly forgot that at the time, I was looking forward to the Orange Fuse. Well I just got one of those in...and the wait was well worth it.
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1570small_zps0661b9bd.jpg)
And I just got the BO OHT in as well. I am still looking for the other version.
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1569small_zps29ac3c73.jpg)
And last but not least, I received this Leatherman store exclusive Micra from a friend.
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1568small_zpse2371775.jpg)
-
Hi Chako. Nice to see you back.
-
interesting Micra that. :)
-
Thanks Millhouse. It is good to be back.
Yes Gareth, I am very fortunate to have a friend who lives close to the Leatherman factory.
-
Welcome back Chako, the place hasn't been the same without you :tu:
-
That Micra is awesome, Chako.
-
Glad to see you back Chako. :tu:
Love the Orange Fuse. I have been looking for one myself. I am trying to put together a Fuse collection. Do you by chance know of all the fuse variations? That Micra is awesome also. :cheers:
-
I got my greedy little hands on the new Rime carabiner, via Signal Snowboards .com. So far it works pretty well. I've even tried the earbuds carrying capablity. Thought that capablity is a bit of an acquired taste, it does work. I hope Signal Snowboards get restocked with their Hails, so I can try them out!
Overall, with Leatherman's purchase of PockettoolX and going into the realm of keychain/pockettools. The move is a good one. Give it time. Leatherman may be on to something.
-
I am not sure if I know of all the variations, but here are the ones that I have.
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1575small_zps797faaa3.jpg)
From top left to right:
BO Cap Crimper Fuse, Orange Fuse, Custom Camo Fuse, Knifeless Fuse, BO Camo Fuse, Old lock lever Fuse
From Bottom left to right:
Camo Fuse, New Lock Fuse, Cap Crimper Fuse, BO Fuse, and Gold plated Fuse.
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1579small_zps3a2b50fe.jpg)
I would think if you wanted a full set, you would have to look closely at the two different lever lock styles. You can tell the difference between a first generation Fuse and a second generation Fuse from the locking levers. Second gen has a gap when viewed from the sides...which is an improvement over the older style.
Hope this helps you Captain Spaulding
-
It helps greatly. I forgot about the Gold Plated Fuse. While its not factory original I would eventually like to get one. I just looked and there are 4 variants of the Gold Plated Fuse. :ahhh I think I will have to stick with factory original Fuses for now. Where did you get the Custom Camo Fuse though. That thing is sweet. :tu:
-
Got it off of eBay. Same guy that made those carbon fiber painted Leathermans.
-
I just got a Flair and Sideclip. Thank you Ebay.
-
Got it off of eBay. Same guy that made those carbon fiber painted Leathermans.
Oh... alright thanks. :tu:
-
I am not sure if I know of all the variations, but here are the ones that I have.
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1575small_zps797faaa3.jpg)
From top left to right:
BO Cap Crimper Fuse, Orange Fuse, Custom Camo Fuse, Knifeless Fuse, BO Camo Fuse, Old lock lever Fuse
From Bottom left to right:
Camo Fuse, New Lock Fuse, Cap Crimper Fuse, BO Fuse, and Gold plated Fuse.
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1579small_zps3a2b50fe.jpg)
I would think if you wanted a full set, you would have to look closely at the two different lever lock styles. You can tell the difference between a first generation Fuse and a second generation Fuse from the locking levers. Second gen has a gap when viewed from the sides...which is an improvement over the older style.
Hope this helps you Captain Spaulding
Wow in my ignorance I thought there were only one fuse.
Little did I know...
Well I did get a squirt s4 the other day.
-
There are just as many Blast versions out there. The Kick, less so.
-
Well finally got the Hybrid - BNiB no less!!
Which also completes the trio for me.
Both the Genus and Vista are now at long last reunited with their sibling!!
Ahh... feels good :drink:
-
Well finally got the Hybrid - BNiB no less!!
Which also completes the trio for me.
Both the Genus and Vista are now at long last reunited with their sibling!!
Ahh... feels good :drink:
That's very cool... got some pics? :D
-
Well finally got the Hybrid - BNiB no less!!
Which also completes the trio for me.
Both the Genus and Vista are now at long last reunited with their sibling!!
Ahh... feels good :drink:
Very cool that you have all three Tosh :tu: I love my Vista and it's been sitting on the shelf for about a year or so. The only time I really get to use it is during spring turkey season which is just around the corner. I can't wait!¡!
-
Well finally got the Hybrid - BNiB no less!!
Which also completes the trio for me.
Both the Genus and Vista are now at long last reunited with their sibling!!
Ahh... feels good :drink:
That's very cool... got some pics? :D
Pics will be along asap - just waiting till I'm alone, if you get my drift?
-
OHT >:D
(http://img844.imageshack.us/img844/470/leathermanohtcoyotetan3.jpg) (http://imageshack.us/photo/my-images/844/leathermanohtcoyotetan3.jpg/)
-
Well finally got the Hybrid - BNiB no less!!
Which also completes the trio for me.
Both the Genus and Vista are now at long last reunited with their sibling!!
Ahh... feels good :drink:
That's very cool... got some pics? :D
Pics will be along asap - just waiting till I'm alone, if you get my drift?
Ewww you're not gonna do something weird, are you..??!? :P :pok:
-
I just got 2 more items in today.
A Mako Ti (When did Leatherman start making pocket tools like this?)
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1760small_zpsa9c33153.jpg)
And a custom Charge TTi from Texas Toolcrafters.
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1762small_zpsc1dcd6ea.jpg)
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1763small_zps6b4b15d8.jpg)
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1770small_zpse6103d94.jpg)
-
Nice Damascus on that new Charge :tu: The Mako and Piranha were made by PocketTool X until they were bought by LM a while back.
Sent from Endor via Schlapatok
-
I just got 2 more items in today.
A Mako Ti (When did Leatherman start making pocket tools like this?)
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1760small_zpsa9c33153.jpg)
And a custom Charge TTi from Texas Toolcrafters.
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1762small_zpsc1dcd6ea.jpg)
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1763small_zps6b4b15d8.jpg)
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1770small_zpse6103d94.jpg)
Oh that Charge is :drool:
-
The new TTi scales don't sit right with me from initial impression, but that Damascus blade is just beautiful. :tu:
-
I received a Pulse today. It was not in the condition that the seller stated. I it already in the mail to Leatherman for some TLC. The pliers head was broke and the knife is buggered up.
-
just picked up a skeletool for 20 from my local sports store. it was open box price plus clearance. was a pretty good find if you ask me. not overly impressed. how do i keep these driver bits from being lost? any tips?
overall, i like the form, didnt think i would, but i do. it has less tools than my wingman which isnt horrible, it has the basic ones i need at least. but the thing i miss most from my wingman is the spring loaded pliers.
-
I received my new red Micra earlier today. I really like the red :tu:
-
These came in today.
(http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_1811small_zpse07d0f88.jpg)
-
Picked up a new wave , charge tti and a bit extender today
(http://i992.photobucket.com/albums/af47/MDC85/20130319_154517.jpg)
(http://i992.photobucket.com/albums/af47/MDC85/20130319_154609.jpg)
-
My latest and first (and only, maybe my last also) Leatherman Surge.
-
My latest Leatherman purchase was a Crunch a few months ago. tom. 8)
-
My first and second leatherman :multi:
-
:climber:
-
Charge TTi Camo not Cabelas:climber:
-
Charge TTi Camo not Cabelas:climber:
Nice Charges :tu: Also, welcome to the forum :cheers:
-
Charge TTi Camo not Cabelas:climber:
Nice Charges :tu: Also, welcome to the forum :cheers:
thank you
-
I received my Juice KF4 today :mail: I must say that the solar yellow is very cool 8) I also love how the handles are actually evenly sized unlike my S2 and XE6 (both of which have one handle slightly thicker than the other). I'm very pleased with it. Now I have to try to fit it into my EDC lineup :D :ahhh
-
I just ordered 2 Hail-StyleCS combos.
Now the wait!! :mail: :whistle:
-
A simple Wingman, and I'm very happy!
Sent from my Galaxy Nexus using Tapatalk 2
-
Got a few Mini's in today! :tu:
-
A few :o :o :o :D
The BO Mini is a terrific find mate 8) 8) , they can be tough to nab :tu: :tu:
-
A few :o :o :o :D
The BO Mini is a terrific find mate 8) 8) , they can be tough to nab :tu: :tu:
Ditto...2 BO that are on hard tracking life..a BO minitool and a BO charge :facepalm:
Seeing them in LM shoff thread' already feel peaceful..not!
my latest LM is the 1st gen Wave..tidy and clean..
-
Lovely stuff :D
:ahhh MINI! :ahhh
-
Semi complete Smoothie.
I hope this will be my last juice.
(http://img.tapatalk.com/d/13/03/22/ry8amudy.jpg)
(http://img.tapatalk.com/d/13/03/22/7y5e5e2u.jpg)
-
Metro you bring out the inner beauty of the Juice.
-
Just bought an original wave from kentucky tsa. Little rusty, but im gunna take care of her O0
Sent from my Apple I
-
Metro you bring out the inner beauty of the Juice.
Judy wait till the BO version gets put together.
-
My latest :D
-
Another pic :D
-
Just bought an original wave from kentucky tsa. Little rusty, but im gunna take care of her O0
Sent from my Apple I
Run her a nice oily bath,give her a exfoliating rub?Welcome to MTo :pok:
-
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/SAM_1543_zpsb1edc2a9.jpg)
A dog repelling dog toy ??? :D. A BO Core with cap crimpers found on Oz Ebay for a price I could not resist ::) :D, a late model PST & a Danish 'special' ;) :D
-
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/SAM_1543_zpsb1edc2a9.jpg)
A dog repelling dog toy ??? :D. A BO Core with cap crimpers found on Oz Ebay for a price I could not resist ::) :D, a late model PST & a Danish 'special' ;) :D
Do the blades lock on the Danish ?
-
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/SAM_1543_zpsb1edc2a9.jpg)
A dog repelling dog toy ??? :D. A BO Core with cap crimpers found on Oz Ebay for a price I could not resist ::) :D, a late model PST & a Danish 'special' ;) :D
Do the blades lock on the Danish ?
Yes, it's just the OH feature that's been removed from the Surge.. :)
-
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/SAM_1543_zpsb1edc2a9.jpg)
A dog repelling dog toy ??? :D. A BO Core with cap crimpers found on Oz Ebay for a price I could not resist ::) :D, a late model PST & a Danish 'special' ;) :D
Nice haul there:D
Sent from my XT901 using Tapatalk 2
-
Juice C2 :)
-
Slim Jim! My modded S2
(http://img.tapatalk.com/d/13/03/26/y3a9aqyj.jpg)
(http://img.tapatalk.com/d/13/03/26/yny9asyz.jpg)
(http://img.tapatalk.com/d/13/03/26/hamy7uja.jpg)
(http://img.tapatalk.com/d/13/03/26/guma3y5u.jpg)
(http://img.tapatalk.com/d/13/03/26/jyde2e5a.jpg)
-
Very very nice!
-
Just got a new charge AL to replace my skeletool as EDC. So far I am impressed with how comfortable it is in the hands compared to the skeletool or surge.
-
Just got a new charge AL to replace my skeletool as EDC. So far I am impressed with how comfortable it is in the hands compared to the skeletool or surge.
I love my AL too. I like the feel and the look of black with steel:)
Sent from my XT901 using Tapatalk 2
-
The black sure does look nice doesn't it?
Although knowing me they won't be like that long.
-
Just ordered a Rebar. :ahhh Can't wait to get it as I have been drooling over them since I heard they were coming out.
-
Just ordered a Rebar. :ahhh Can't wait to get it as I have been drooling over them since I heard they were coming out.
It's a great multitool, and I really like the pliers and wire cutters on it. Enjoy :tu:
-
Just ordered a Rebar. :ahhh Can't wait to get it as I have been drooling over them since I heard they were coming out.
It's a great multitool, and I really like the pliers and wire cutters on it. Enjoy :tu:
The REBAR is my favorite LM to date. I only wish it had scissors.
-
Just ordered a Rebar. :ahhh Can't wait to get it as I have been drooling over them since I heard they were coming out.
It's a great multitool, and I really like the pliers and wire cutters on it. Enjoy :tu:
The REBAR is my favorite LM to date. I only wish it had scissors.
Me too, originally, but I've found I can do without scissors on something like the Rebar, especially since I carry a SAK anyway ;) I've found that those nice wire cutters work just fine for scissor snipping type tasks (tags, threads). Of course, those won't work for things like cutting paper or trimming whiskers. If you don't cut much paper or have any whiskers to trim, then I suppose you may have less need for scissors. I used to be heavily pro scissors, but over the past few weeks, I've seen that I don't actually need them as much as I thought.
-
I really wish the Rebar had scissors, but I really don't "need" them in the Rebar. Just like Monrogue I always have a SAK on me anyways so scissors is covered. :tu:
-
I really wish the Rebar had scissors, but I really don't "need" them in the Rebar. Just like Monrogue I always have a SAK on me anyways so scissors is covered. :tu:
I also recently got a Micra to compliment my Pioneer if I feel I'll want scissors :tu:
-
I just got my 4th PST from an auction.
Or I should say 3rd, because one of them turned out to be a PST II.
Think it is a saberpoint pre 92.
It´s like taking a chance buying from auctions because of blury phonepictures showing really nothing.
The fun part is that none of them are not completely the same.
I just love the PST:s.
-
PST's are awesome but have you tried a REBAR yet?
-
A Micra whose scissors started to malfunction after less than 24 hrs of unboxing... :cry:
-
Hopefully we can get those working for you, TurkTeen.
Meanwhile...
I just got my first Squirt PS4 (in red). Now i can sit down to compare it honestly to the Gerber Dime.
-
Got my Rebar from the January donation draw today (thanks Travis and Def :D ) the mrs stopped by the liquor store this afternoon and got me a nice Scotch as well pictured below with my latest LM is the Macallan Fine Oak Triple Cask 17yr. :ahhh :ahhh It's like it's Christmas here today for me!¡!
(http://img.tapatalk.com/d/13/03/29/setu7yzy.jpg)
*edit- Stupid Schlapatok :twak: turned my image upside down. At least our friends in Oz will be able to view it just fine :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
Sent from Endor via Schlapatok
-
I am sooo jealous of all these rebars! I want one, but there are higher multitools on the priority list.
-
My Rebar should hopefully arrive by Saturday. :mail: I can't wait. :ahhh
-
PST's are awesome but have you tried a REBAR yet?
Yes , actually have one and I love it to. :)
Like the boxy retrostyle that it has.
-
PST's are awesome but have you tried a REBAR yet?
Yes , actually have one and I love it to. :)
Like the boxy retrostyle that it has.
Me too :tu:
love the classic style.
-
Splash Swim team
(http://img.tapatalk.com/d/13/03/30/hugeny6u.jpg)
(http://img.tapatalk.com/d/13/03/30/epeje4yj.jpg)
(http://img.tapatalk.com/d/13/03/30/y8uruge5.jpg)
(http://img.tapatalk.com/d/13/03/30/tuhegaze.jpg)
-
The fun part is that none of them are not completely the same.
I just love the PST:s.
I hear you buddy.. :tu:
-
My Charge TTI arrived from Eric today! :woohoo: Love it so far, seems like a high quality tool, so I sense this will be my new EDC for a while!
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/IMG_20130402_172405_zps13cb6cb6.jpg)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/IMG_20130402_172531_zpsad908ee3.jpg)
-
Having owned a lonely Blast for a couple on months decided to buy the Wave to keep it company. Really impressed with the quality but initially quite stiff to use. After oiling & opening and closing countless times it is becoming more user friendly but wonder if anyone else has been attacked by the pliers. I've lost count of the number of blood blisters I've got!
-
My latest is a new Leatherman Wave. My last one got dropped down a ravine near Snowdon and I wasnt likely to follow it down! I was going to opt for something different but the wave is let's be honest a pretty decent multitool and these guys threw in a free handwarmer too so couldn't complain! http://www.aboveandbeyond.co.uk/.leatherman-wave-multitool-gift-set_037447097782.htm
-
Juices SC2, 3 colors Blue, Silver, Red!!!
(http://i1270.photobucket.com/albums/jj607/armee-suisse/8B785E14-8586-4E31-8302-7E8650BF5F02-3015-000004DA6FCF9CE3.jpg)
-
Replaced my S2 I sold. Wish I still had my CS4 and C2 though. I found the bits to be easy to deploy which was a big plus. The grind on the knife sucks though.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%203/DSC00223_zpsb59d9253.jpg)
-
Scored a skeletool cx on CL for $15.
-
Juice SC2.
Really like the silver or non color handles.
-
That's an interesting Juice...
-
Picked up a pro, anyone know what's up with this juice ? I don't see to many around . Rare ? Any info would help.
(http://img.tapatalk.com/d/13/04/15/a7yzepub.jpg)
-
Picked up a pro, anyone know what's up with this juice ? I don't see to many around . Rare ? Any info would help.
(http://img.tapatalk.com/d/13/04/15/a7yzepub.jpg)
From what I've gathered in various conversations here, it seems like it's somewhat rare (anyone correct me if I'm mistaken here). What is the difference between that and the regular XE6, other than that obvious little pruner-like blade (which is sweet btw ;))? I knew of that blade on the Pro, but I don't remember what other differences there were, if any.
-
Picked up a pro, anyone know what's up with this juice ? I don't see to many around . Rare ? Any info would help.
From what I've gathered in various conversations here, it seems like it's somewhat rare (anyone correct me if I'm mistaken here). What is the difference between that and the regular XE6, other than that obvious little pruner-like blade (which is sweet btw ;))? I knew of that blade on the Pro, but I don't remember what other differences there were, if any.
tweezers i think.
-
Picked up a pro, anyone know what's up with this juice ? I don't see to many around . Rare ? Any info would help.
From what I've gathered in various conversations here, it seems like it's somewhat rare (anyone correct me if I'm mistaken here). What is the difference between that and the regular XE6, other than that obvious little pruner-like blade (which is sweet btw ;))? I knew of that blade on the Pro, but I don't remember what other differences there were, if any.
tweezers i think.
Oh interesting. Where are they located? Just curious as I have the XE6 and am trying to picture how that blade and any other extras fit into it. I don't carry it at all really anymore. It was my second ever multitool, but I wasn't aware of it's dimensions and weight, and being less educated on these things at that time, I just went ahead and ordered it as it looked cool at the time. It's a decent MT, but it has a bit too much going on for the Juice line's perceived pocketability (imho anyway). The S2 and Kf4 are good pocket MTs for me.
-
Yeah it's a little thick, trying a sheath carry today. Here's a pic of the tweezers
(http://img.tapatalk.com/d/13/04/15/bape4umy.jpg)
-
Its in like a rubber grommet.
-
Slim Jim by Metropolicity :D
(http://i782.photobucket.com/albums/yy104/kirk130013/image_zps9f02c2a0.jpg) (http://s782.photobucket.com/user/kirk130013/media/image_zps9f02c2a0.jpg.html)
-
Picked up a pro, anyone know what's up with this juice ? I don't see to many around . Rare ? Any info would help.
(http://img.tapatalk.com/d/13/04/15/a7yzepub.jpg)
I think Bob's write up is the best :think: :think:
http://wiki.multitool.org/tiki-index.php?page=Pro
I think they were a some what limited production item , made exclusively for Costco & I suspect a lot have been snaffled by collectors so yep they are getting tough to find & as time goes on I suspect they will get a bit more expensive too land :think: :think:
-
Picked up a pro, anyone know what's up with this juice ? I don't see to many around . Rare ? Any info would help.
I think Bob's write up is the best :think: :think:
http://wiki.multitool.org/tiki-index.php?page=Pro
I think they were a some what limited production item , made exclusively for Costco & I suspect a lot have been snaffled by collectors so yep they are getting tough to find & as time goes on I suspect they will get a bit more expensive too land :think: :think:
thanks for the info, i snagged this for 20.00 bucks yesterday.
-
Slim Jim by Metropolicity :D
Is that a s2
-
Its in like a rubber grommet.
Huh, that's different. Yeah, it is thick, and for a Juice, I think it's a bit too much. The Kf4 is as thick/heavy as I prefer for a "pocket size" line like the Juices. The XE6 is more like a full sized MT forced into the body of a Juice, considering it's weight and quantity of tools. Still, if you are one to belt carry, then it's probably not an issue. And it's still fun to fiddle with it on occasion ;)
-
A Leatherman Blast! I'm surprised how robust and well-made it feels. Maybe it's because i've been carrying a Wingman when off-duty for some weeks now!
-
A blue PS4. I ordered it at 8:30 last night on Amazon, and it arrived 13 hours later!
-
A blue PS4. I ordered it at 8:30 last night on Amazon, and it arrived 13 hours later!
Wow, that is great service, but you didn't even get to enjoy the anticipation of getting such a useful little tool .
-
Charge Tti best multi tool ever, and the new surge when is comes out
-
A Leatherman Blast! I'm surprised how robust and well-made it feels. Maybe it's because i've been carrying a Wingman when off-duty for some weeks now!
The Blast is an awesome tool! Glad to hear you like it!
-
A blue PS4. I ordered it at 8:30 last night on Amazon, and it arrived 13 hours later!
Wow, that is great service, but you didn't even get to enjoy the anticipation of getting such a useful little tool .
What better way to fuel my instant gratification, though?!? :)
-
Charge Tti best multi tool ever, and the new surge when is comes out
The Charge TTi is pretty sweet. It's one of my primary full sized multitools :tu: Welcome to the forum :cheers:
-
Charge Tti best multi tool ever, and the new surge when is comes out
The Charge TTi is pretty sweet. It's one of my primary full sized multitools :tu: Welcome to the forum :cheers:
I do not know much about Leathermen, however, the Charge Tti is so attractive :D I also want a style CS, a Juice XE6, a squirt S4, a Wave(just cuz it is the bestseller of LM) and a Surge :drool:
-
Charge Tti best multi tool ever, and the new surge when is comes out
The Charge TTi is pretty sweet. It's one of my primary full sized multitools :tu: Welcome to the forum :cheers:
I do not know much about Leathermen, however, the Charge Tti is so attractive :D I also want a style CS, a Juice XE6, a squirt S4, a Wave(just cuz it is the bestseller of LM) and a Surge :drool:
The TTi is very nice indeed. However, the Wave is basically the same thing functionally other than the cutting hook, cap crimper, main blade steel and the handle scales of course. The Wave is probably around half the cost of a TTi too, so when (not if, when ;)) the time comes that you decide to get one of them, it may be best to try the Wave first. I have both, as well as a Charge AL, and I must say that despite all of them being awesome, it is a bit redundant as they are all functionally the same thing. It's not so bad if you have various places to strategically place them around your home or vehicle, but since you're 13, you probably don't have any of that yet ;) One benefit of your age is that you can probably ask for some of your wish list MTs/SAKs for b-days :tu:
I also have the XE6, and that is nice too. It's a bit bulky and heavy for it's supposed size class as it weighs as much as a Blast or Rebar. It's solid though, and has a lot of function, but it's just too much for what I think the Juice line is intended to be. The Surge and the others you mentioned I do not own, but I hear the Surge is rather large and heavy, and is mostly similar to the Wave as well with a couple differences.
Don't take this as me trying to discourage you at all, just offering any info that may be helpful before you dive in ;) I wish I had found this place earlier on in my MT/SAK purchasing phase, because I probably could have learned a lot and saved some money (or gone the opposite way and blown even more cash ::)). Looking back, I purchased several Leathermans in my first few months of becoming interested in them, and I probably could have done without a few of them now that I know what I know. It has taken me some time to learn what I really want in a MT/SAK, so several of them are just sitting in a drawer mostly unused at this point. Like they say, hindsight is 20/20 :shrug:
-
My latest LM is ST300
(http://i48.tinypic.com/2qu2a8o.jpg)
-
(http://img853.imageshack.us/img853/6002/leathermanblastbo20kopi.jpg) (http://imageshack.us/photo/my-images/853/leathermanblastbo20kopi.jpg/)
LM Blast BO
-
Nice shot of that BO Blast!
-
Diggin the BO Blast. :tu:
-
Picked up what was advertised as a Charge TTi off a UK classifieds website but when it arrived it had a 154 cm blade and no gut hook, so it's a Ti right? Even happier if it is :)
-
Picked up what was advertised as a Charge TTi off a UK classifieds website but when it arrived it had a 154 cm blade and no gut hook, so it's a Ti right? Even happier if it is :)
Nice catch ! :tu:
-
Picked up what was advertised as a Charge TTi off a UK classifieds website but when it arrived it had a 154 cm blade and no gut hook, so it's a Ti right? Even happier if it is :)
Nice one :tu:
-
Traded a spare torch I had for a Skele CX. Lost my old one about this time last year while taking my wife's poodle out for his night time potty break. Had it clipped in my pocket, and it managed to jump out at some point. :rant:
Not making the same mistake with the one I have now.
-
I traded off my Skeletools with the exception of the Discontinued PE Skeletool. I am thinking of trading it off though. I keep going back and forth on it. :twak:
-
I traded off my Skeletools with the exception of the Discontinued PE Skeletool. I am thinking of trading it off though. I keep going back and forth on it. :twak:
Whatever you do, don't rely on just the pocket clip to keep it secure. :facepalm:
-
I traded off my Skeletools with the exception of the Discontinued PE Skeletool. I am thinking of trading it off though. I keep going back and forth on it. :twak:
Whatever you do, don't rely on just the pocket clip to keep it secure. :facepalm:
I've been carrying mine for months using only the clip and it stays put perfectly. I don't think I've heard of any accounts of it escaping until yours, in fact. The clip is thin to be sure, but it's also long and the Skeletool sits pretty deep.
-
Pick up a PST II
(http://img.tapatalk.com/d/13/04/22/edy5ysah.jpg)
-
Pick up a PST II
(http://img.tapatalk.com/d/13/04/22/edy5ysah.jpg)
Nice :tu: I love my PSTII.
-
Picked up a supertool 300 /monarch 400 combo at Gander Mountain for $39 on clearance.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
-
I just got a blast in the mail on saturday. Love this tool!!!
Sent from my Galaxy S3 using crapatalk two point oh.
-
Wee, new family members ;-)
-
Just received my new Rebar. Gotta say I love it :D
-
Just received my new Rebar. Gotta say I love it :D
The Rebar is pretty cool :tu:
-
Just received my new Rebar. Gotta say I love it :D
The Rebar is pretty cool :tu:
Yeah, I love mine too :D
-
Joining the recharge club.. with a twist I guess.
The mod was actually much easier to do than I figured.
-
My new black OHT: Should I open it or shouldn't I? :D
(http://i306.photobucket.com/albums/nn243/teofiloeugeniopanganiban/DSC_0261.jpg) (http://s306.photobucket.com/user/teofiloeugeniopanganiban/media/DSC_0261.jpg.html)
-
Oh man, you have to open it.
-
Hi everyone,
Here's a 14 year old new Flair.
Picked up today and noticed it had a loose washer inside the tool, makes me guessing it wasn't installed right.
Could someone verify the Flair has two washers?
(http://img593.imageshack.us/img593/8458/img5678uu.jpg)
(http://img6.imageshack.us/img6/952/img5691ud.jpg)
-
Here are the best pictures I could get of the Flair I got about a month ago. It came with no box though so I have no clue as per manufacture date. No washers I think. Hope that helps.
-
Oh man, you have to open it.
Aye! Aye! Captain! :salute:
-
Oh man, you have to open it.
Aye! Aye! Captain! :salute:
SoOoOoOo....... Do you like it. :think:
-
Thanks Firiki, I'm not sure but it looks like there might be one one each side of the medium flathead and one in between the 'spreader' and the small flathead.
-
Oh man, you have to open it.
Aye! Aye! Captain! :salute:
SoOoOoOo....... Do you like it. :think:
With so many reviews about the OHT, pros and cons, I like the tool. Unique from the line of Leatherman Multitools! :tu:
-
Nice! :tu:
-
My latest Leatherman is the new version Charge TTi. The new scale treatment is very neat.
Cheers - Joe
-
Newest as of right now is a mint ST200 from a trade here. I've honed down the lock levers for comfort and it hasn't left my side since it arrived yesterday. I managed to stretch a 2004 Wave leather sheath around it by getting the leather damp then leaving the tool in it for about an hour. Very nice way to carry it!
-
Newest as of right now is a mint ST200 from a trade here. I've honed down the lock levers for comfort and it hasn't left my side since it arrived yesterday. I managed to stretch a 2004 Wave leather sheath around it by getting the leather damp then leaving the tool in it for about an hour. Very nice way to carry it!
That's one way to do it :think: Probably the best way. Great job!¡!
-
Newest as of right now is a mint ST200 from a trade here. I've honed down the lock levers for comfort and it hasn't left my side since it arrived yesterday. I managed to stretch a 2004 Wave leather sheath around it by getting the leather damp then leaving the tool in it for about an hour. Very nice way to carry it!
That's one way to do it :think: Probably the best way. Great job!¡!
Thanks! I'm doing it right now with an old blast sheath that i don't have a tool for anymore. My current blast came with a new sheath. This one took some work, but it might work out good.
-
Long time luker, finally set up a user name.
Probably cause I finally bought a WAVE!!!! :D
-
Long time luker, finally set up a user name.
Probably cause I finally bought a WAVE!!!! :D
Welcome to the forum, and enjoy your new Wave :cheers:
-
Long time luker, finally set up a user name.
Probably cause I finally bought a WAVE!!!! :D
Welcome!
The Waves a great place to start!
-
Long time luker, finally set up a user name.
Probably cause I finally bought a WAVE!!!! :D
Great job!¡! Welcome!¡!
-
Oh man. So my latest was over 100 TSA bunk lot :)
(http://img.tapatalk.com/d/13/04/29/5azy8epy.jpg)
-
Oh man. So my latest was over 100 TSA bunk lot :)
(http://img.tapatalk.com/d/13/04/29/5azy8epy.jpg)
Nice lot. I hope that money didn't go to the TSA.
-
I had a bargain today :whistle:, someone who did not know what he sold.
€26,-
$ 34.12
0498 in the handles so April 1998 , and everything brand new
:multi:
(http://i992.photobucket.com/albums/af47/MDC85/20130501_183238.jpg) (http://s992.photobucket.com/user/MDC85/media/20130501_183238.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/20130501_183300.jpg) (http://s992.photobucket.com/user/MDC85/media/20130501_183300.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/20130501_183354.jpg) (http://s992.photobucket.com/user/MDC85/media/20130501_183354.jpg.html)
-
I had a bargain today :whistle:, someone who did not know what he sold.
€26,-
$ 34.12
0498 in the handles so April 1998 , and everything brand new
:multi:
Wow, that's a sweet deal. Nice score :tu:
-
These little guys actually arrived about two weeks ago. :tu:
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1796_zpsa359b17e.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF1796_zpsa359b17e.jpg.html)
-
Nice! :tu:
-
Something black, dressed in Camo ;) :D 8) 8)
-
Something black, dressed in Camo ;) :D 8) 8)
All right, out with it ya tease. :pok: :D :D
-
Broke down and bought a Rebar at lunch time
Humble pie time:I actually rather like it. :facepalm:
I can also so it being modded >:D
-
Broke down and bought a Rebar at lunch time
Humble pie time:I actually rather like it. :facepalm:
I can also so it being modded >:D
Glad you like it :tu: How would you mod it?
-
Something black, dressed in Camo ;) :D 8) 8)
Charge?
-
Broke down and bought a Rebar at lunch time
Humble pie time:I actually rather like it. :facepalm:
I can also so it being modded >:D
Did you get a good deal on it mate? I'm still thinking about a Rebar but have yet to find a price in the UK I am willing to pay. :D
-
A BO boat anchor arrived today. This thing is HUGE! :ahhh
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1801_zps264c7d12.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF1801_zps264c7d12.jpg.html)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1803_zps5fbe4f16.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF1803_zps5fbe4f16.jpg.html)
The main blade has been slightly modded as you can see. The cutouts give your finger a place to rest when using it for detail work. Well done and works well. :tu:
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1806_zps1a8a3365.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF1806_zps1a8a3365.jpg.html)
-
A BO boat anchor arrived today. This thing is HUGE! :ahhh
The main blade has been slightly modded as you can see. The cutouts give your finger a place to rest when using it for detail work. Well done and works well. :tu:
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1806_zps1a8a3365.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF1806_zps1a8a3365.jpg.html)
I like that main blade :tu:
-
Just got a Style CS:
(http://i306.photobucket.com/albums/nn243/teofiloeugeniopanganiban/DSC_0335.jpg) (http://s306.photobucket.com/user/teofiloeugeniopanganiban/media/DSC_0335.jpg.html)
-
Very nice Surge. Who did the blade?
-
Very nice Surge. Who did the blade?
nelly1974. It is nice. Right now it's in my pocket trying to weigh my pants down. :ahhh Fortunately there's an awl to help tighten my belt.... ;)
-
I grabbed a red Style and a blue Style on clearance from a local farm store for $4 yesterday.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
-
Wow awesome score. :))
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
-
Got Flair(s) on the way.
-
Broke down and bought a Rebar at lunch time
Humble pie time:I actually rather like it. :facepalm:
I can also so it being modded >:D
Did you get a good deal on it mate? I'm still thinking about a Rebar but have yet to find a price in the UK I am willing to pay. :D
Wee bit over Amazon prices,but really just wanted to walk out of a shop with a new toy :doh: I mean tool to play with
-
Broke down and bought a Rebar at lunch time
Humble pie time:I actually rather like it. :facepalm:
I can also so it being modded >:D
Glad you like it :tu: How would you mod it?
Loosing one or both of the blades,adding a bit driver and scissors...UK legality again :ahhh
-
Back with old faithful thanks too dunc. :tu: original wave,
-
Back with old faithful thanks too dunc. :tu: original wave,
Yeah, I want one of those :drool: How thick is it compared to the New Wave?
-
Broke down and bought a Rebar at lunch time
Humble pie time:I actually rather like it. :facepalm:
I can also so it being modded >:D
Did you get a good deal on it mate? I'm still thinking about a Rebar but have yet to find a price in the UK I am willing to pay. :D
Wee bit over Amazon prices,but really just wanted to walk out of a shop with a new toy :doh: I mean tool to play with
I can understand that mate. :salute:
-
Long time luker, finally set up a user name.
Probably cause I finally bought a WAVE!!!! :D
Welcome to the forum, and enjoy your new Wave :cheers:
Thanks, I been long time knife carrier, Buck, Spyderco....but really thinking this whole multitool thing is good to have item!
-
Long time luker, finally set up a user name.
Probably cause I finally bought a WAVE!!!! :D
Welcome!
The Waves a great place to start!
Yes it is!! I just have to get used to the weight compared to only carrying a Buck vantage or Spyderco Delica. Been using the sheath but wondering about the pocket clip I've seen on here.
-
Long time luker, finally set up a user name.
Probably cause I finally bought a WAVE!!!! :D
Welcome to the forum, and enjoy your new Wave :cheers:
Thanks, I been long time knife carrier, Buck, Spyderco....but really thinking this whole multitool thing is good to have item!
You are correct there. You never know when you may need it. Even if you don't use it every single day, it's so worthwhile when those times come that you do need it.
-
Something black, dressed in Camo ;) :D 8) 8)
All right, out with it ya tease. :pok: :D :D
I believe you are quite familiar with the model David :pok: :pok: :D :D
A Camo Blast , Portland too Grumpyland then too Australia :D :D
(http://i291.photobucket.com/albums/ll287/multimat426/Camo/503f7f72-53e9-4c4b-a6c8-c219a27296c0_zps76c47ccb.jpg)
-
My latest and favorite... at the moment.
-
Great looking ST200 BO CC. Not many of those around.
-
My latest and favorite... at the moment.
:drool:
-
Very nice.. 8) 8)
-
The drooling is over ! My hands are all over it.
Finally got a Minitool and it´s in very good condition.
What a lovely little tool.
-
Cool minitool, box and all.
-
Cool Mini Tool! I just watched one with that same box sell for close to $100 on US ebay.
-
A pre owned Sideclip arrived today, and it is in pretty good shape! It came along with a Supertool 200, which needs a good bath and a PSTII which is quite ok. When i began hoarding MTs i thought older LM models like the PST were lame, but now i have learned to love them.
-
Haven't gotten it yet, but my next LM is going to be a new Style CS. I want to do a side by side comparison with the Squirt S4 and see which one is a better overall tool.
-
A pre owned Sideclip arrived today, and it is in pretty good shape! It came along with a Supertool 200, which needs a good bath and a PSTII which is quite ok. When i began hoarding MTs i thought older LM models like the PST were lame, but now i have learned to love them.
That is a very nice set of 3 mate 8) 8) 8).
There is something very therapeutic & rewarding about cleaning up an old multi :think: :think:
Yep those old LM's sure do get under your skin :D :D
-
A pre owned Sideclip arrived today, and it is in pretty good shape! It came along with a Supertool 200, which needs a good bath and a PSTII which is quite ok. When i began hoarding MTs i thought older LM models like the PST were lame, but now i have learned to love them.
While I didn't think the PST and other older LMs were lame, I know what you mean in a way. The PST is a rather simplistic MT by design and function, but that's where its charm lies. There's just something about that simple, classic design that I love, and the tool actually is functional and useful. It's not too bulky or heavy, and slips right into a pocket no problem. I love my PSTII (carrying this week as a matter of fact) :tu:
-
A pre owned Sideclip arrived today, and it is in pretty good shape!
Nice one!
I need to find one asap!
-
:multi:
-
A pre owned Sideclip arrived today, and it is in pretty good shape! It came along with a Supertool 200, which needs a good bath and a PSTII which is quite ok. When i began hoarding MTs i thought older LM models like the PST were lame, but now i have learned to love them.
Pics when they're all clean and nice? :pok: :D
-
Two more brand new Mini's. :D
-
Two more brand new Mini's. :D
How many does that make? Seven? More? :ahhh
My birthday is in two months. ;)
:D
-
How many does that make? Seven? More? :ahhh
My birthday is in two months. ;)
:D
I've actually been able to track down 11 brand new Mini's from a few different companies that still had them in inventory. I've sold a few, traded a couple and I'm now down to six. I'd better start looking for more. ;)
-
Latest one here is a supertool 300. Once I got it out of the package, I'm very "meh" on it. It doesn't feel as good in the hand as I thought it would.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
-
Latest one here is a supertool 300. Once I got it out of the package, I'm very "meh" on it. It doesn't feel as good in the hand as I thought it would.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I found it to be a lot bigger than I expected, myself. I don't own one but I got to fiddle with one at the knife counter at Cabela's a few months ago. I like it but not enough to purchase one now, maybe in a few months.
-
I received a parcel from Metro today :tu:
(http://i671.photobucket.com/albums/vv78/baja820/IMG_20130514_190339_zps5f08b19f.jpg)
Time for a little Surge300 action!
-
Two more brand new Mini's. :D
Wow! Two brand new thats nice indeed. :)
They are very likeable.
-
Work has been kind enough to send me to Nebraska on a course.
It would be rude not to take advantage of US pricing so i have just picked myself up a rather lovely Crunch. Currently clamping it on every solid looking surface in my hotel room!
-
Work has been kind enough to send me to Nebraska on a course.
It would be rude not to take advantage of US pricing so i have just picked myself up a rather lovely Crunch. Currently clamping it on every solid looking surface in my hotel room!
I'd be careful doing that. You may get a repair bill you didn't expect :think:
:rofl: :rofl: :rofl: :rofl: :rofl:
-
I'd be careful doing that. You may get a repair bill you didn't expect :think:
:rofl: :rofl: :rofl: :rofl: :rofl:
That is clearly works problem not mine! :D
I have also just ordered a Gerber machete.... this trip may prove expensive!
-
This neglected little KF4 showed up with the surge from Eric.
(http://i671.photobucket.com/albums/vv78/baja820/IMG_20130518_195944_zpsf38d1b6b.jpg)
(http://i671.photobucket.com/albums/vv78/baja820/IMG_20130518_200339_zps0dbf1bd4.jpg)
(http://i671.photobucket.com/albums/vv78/baja820/IMG_20130518_201610_zps9974d8cb.jpg)
It needed a little TLC :tu: (and oil)
-
After a long wait, my new MUT EOD finally arrived! :tu: :tu:
It's a beauty and a beast! :tu:
(http://i306.photobucket.com/albums/nn243/teofiloeugeniopanganiban/DSC_0351.jpg) (http://s306.photobucket.com/user/teofiloeugeniopanganiban/media/DSC_0351.jpg.html)
(http://i306.photobucket.com/albums/nn243/teofiloeugeniopanganiban/DSC_0345.jpg) (http://s306.photobucket.com/user/teofiloeugeniopanganiban/media/DSC_0345.jpg.html)
(http://i306.photobucket.com/albums/nn243/teofiloeugeniopanganiban/DSC_03442.jpg) (http://s306.photobucket.com/user/teofiloeugeniopanganiban/media/DSC_03442.jpg.html)
-
my first also the latest leatherman is a skeletool cx with a bit kit.now i am looking for the second one:
http://forum.multitool.org/index.php/topic,45101.0.html
-
A beauty indeed gene.
Sent from my GT-N7100 using Tapatalk 2
-
I just got an original supertool dated 0396. Suprisingly it appeared to be in perfect condition.
There is no rust or wear on the tools or plier. But when I should check the tools they were pretty much completely stuck especially on the mainknife side.
I found some rust around the pivot to the tools.
My theory is that somebody got just a little moisture in the tool at an early stage and when the tools were hard to get out never used it again.
I´v washed in soap and wd-40 but´s it´s still very stiff. I´ll let in a jar overnight with a lot of wd-40 and see tomorrow. Found out that handling sharp unused knifes and tools that are stuck is dangerous as I cut myself twice.
I´m convinced that it´s gonna end up good eventually because it is a real beaty.
But if somebody have any tips ......
-
Well, I just acquired a used Genus. I've been obsessing about getting one for some time now. Used or not, it's mine now - all mine [insert maniacal laugh here...]! However, I don't believe it was treated very well, in several aspects. Cleaning it up is not a problem [hey, it's used!]...but -
I have a Genus-specific question I didn't know where else to post:
The handle containing the tools is pretty loose [mainly in turning]...is there a way to tighten that up? Because I don't believe I'm going to send it in to LM any time soon. At any rate, if there is a way of tightening that handle, I don't see it. Definitely appreciate any insights fellow LM/Genus owners may have.
-
Work has been kind enough to send me to Nebraska on a course.
It would be rude not to take advantage of US pricing so i have just picked myself up a rather lovely Crunch. Currently clamping it on every solid looking surface in my hotel room!
i love it and would be totally doing the same. :tu:
-
Here we go. Hopefully its not too common ;-)
-
i don't have any pics yet, but i just bought a surge after retiring my two ST's that served me faithfully for about twenty years. other than a 'star' wrench, there is just no better tool than a leatherman to focus theatrical lighting while you're hanging upside down from a pipe. the case even snaps shut, you don't have to lash it to yourself to climb around. i got the surge because i'm less inclined to get on ladders now that i'm mostly working on the ground on sets, and not as a light monkey.
i'm busy thinking up mods to the surge, of course (i hate that serrated knife, would be fine for food but i don't need it for tools), but that led me to this forum and thusly to the flair, which is my first 'collected' multi-tool, but which is threatening to become EDC for me, just because it is so darn cute.
-
Two of four parcels came today, early a day :tu: Black Wave and Rebar. Both came in LM boxes and came with molle sheaths. The molle with the tiny hole at the bottom. Not to pleased with that. I guess the other two I have are the XL molle sheaths. The finish on the tools are fair to say the least. I think the LM employees were rockin a game of hacky sack with the plier heads during installation and quality control. None the less all the functions work. They were super oily out the box, so less work for me. I cant wait to put them through the EDC beatings to come. They look pretty mean in Black.
Also while in hiding from the MT.o I bought some golden oldies. A ST and BO ST200. I must say the ST tools while locked have no play at all. I mean NO PLAY. Pretty sweet to feel that absolute rigidness using the tools.. That thumb shredding ST200 was a beast to unlock. Its loosened up a bit after usage and is a fun tool to keep in the ever growing rotation of MT's.
Please enjoy the crappy Iphone pics.
-
SOme really cool and unique tools posted here today :tu:
-
+1 On what the bearded Texan said.
(http://i1255.photobucket.com/albums/hh627/enki_ck/Smiley/cowboy-lasso-smiley-emoticon.gif)
-
+1 On what the bearded Texan said.
(http://i1255.photobucket.com/albums/hh627/enki_ck/Smiley/cowboy-lasso-smiley-emoticon.gif)
That has to be my favorite emoticon!¡! :D
-
The handle containing the tools is pretty loose [mainly in turning]...is there a way to tighten that up? Because I don't believe I'm going to send it in to LM any time soon. At any rate, if there is a way of tightening that handle, I don't see it. Definitely appreciate any insights fellow LM/Genus owners may have.
Well, I've finally quoted myself. I guess the reason no one responded was because the answer was *so* obvious; loosen screw, reposition tool handle, retighten. It could use another washer.
I just wish I was a tad better at blade sharpening. It's exhausting when you don't know what you're doing. Still, I know someday I'll figure it out. :o
It's a damned nice tool. Can't wait to use it.
-
Yahoo! Finally organizing my mulits after months of it being disorganized due to being busy with skinth.
The big lot of LM MTs from the TSA has produced a lot of gems. This is one of them.
A pretty rare BO charge XTi, not one but 2! One is in pretty rough shape but I have plans for it. This one is going to the vault!
(http://img.tapatalk.com/d/13/05/27/e5y8u4u4.jpg)
(http://img.tapatalk.com/d/13/05/27/ty6usa9a.jpg)
(http://img.tapatalk.com/d/13/05/27/erajyry2.jpg)
-
Never really fancied the Charge,but that is really :drool:
Nice one Eric!
-
There is something about BO...
-
There is something about BO...
Oh yeah...... :dd:
-
There is something about BO...
Oh yeah...... :dd:
:tu:
-
Never really fancied the Charge,but that is really :drool:
Nice one Eric!
Just wait to see what I planned for the OTHER BO XTi I have.
I already made a regular TTi into what I want to do.
-
my shiny little micra came this morning :)
-
Never really fancied the Charge,but that is really :drool:
Nice one Eric!
Just wait to see what I planned for the OTHER BO XTi I have.
I already made a regular TTi into what I want to do.
Can't wait. :tu:
-
I finally managed to find a BO Super Tool for a reasonable price. It fits in real nice around here!
-
I finally managed to find a BO Super Tool for a reasonable price. It fits in real nice around here!
Yeah, that's :drool: :drool: :drool:
Oh, and more :drool: :drool: :drool: :drool: :drool: :drool:
-
The Skeletool CX arrived today. No gripes with this tool. The DLC coating looks great. A nice loud snap when I deploy the blade. Pliers are taunt and can pluck nose hairs at the tip. Just plain happy with the little folder.
-
I finally managed to find a BO Super Tool for a reasonable price. It fits in real nice around here!
Very very nice little group you have there. :drool:
-
Got me a REBAR in clamshell. Now my new EDC! :tu:
-
Got me a REBAR in clamshell. Now my new EDC! :tu:
Nice, the Rebar is a sweet multitool :tu:
-
Got me a REBAR in clamshell. Now my new EDC! :tu:
Nice, the Rebar is a sweet multitool :tu:
Yes it is Monrogue! :cheers: A sweet mini Supertool 300!
-
Got me a REBAR in clamshell. Now my new EDC! :tu:
Nice, the Rebar is a sweet multitool :tu:
Yes it is Monrogue! :cheers: A sweet mini Supertool 300!
Right. I really like that it's rather robust like the Supertool 300, yet it's slim and lightweight for easy pocket carry (for me anyway). I'm also a fan of the classic Leatherman design, so that makes it even better for me. Enjoy :cheers:
-
After a long period of not buying a multi, I just got myself a Wingman :multi:
-
After a long period of not buying a multi, I just got myself a Wingman :multi:
So what do you think of it. Its pure love, hate with me.
-
After a long period of not buying a multi, I just got myself a Wingman :multi:
So what do you think of it. Its pure love, hate with me.
So far I'm satisfied with the gripping power, and the teeth seem stronger than those on my Blast. I also like that they are spring loaded.
Pinch cutters aren't my favorite but these aren't the worst that I've used.
Pocket clip could be stronger in tension, but it is robust.
Scissors are just ok.
Not the greatest Leatherman but the price was right, and its still higher quality than the El Cheapo's. I think I like it. Time will tell.
Drivers cover the basics well enough.
-
After a long period of not buying a multi, I just got myself a Wingman :multi:
So what do you think of it. Its pure love, hate with me.
So far I'm satisfied with the gripping power, and the teeth seem stronger than those on my Blast. I also like that they are spring loaded.
Pinch cutters aren't my favorite but these aren't the worst that I've used.
Pocket clip could be stronger in tension, but it is robust.
Scissors are just ok.
Not the greatest Leatherman but the price was right, and its still higher quality than the El Cheapo's. I think I like it. Time will tell.
Drivers cover the basics well enough.
Good to hear. I gotta put it up against the blast pliers later on. That's interesting to hear. My biggest gripe are the drivers on there. many times the Phillips fell short on odd jobs around the house. keep that puppy dry too. Its extra function is rust.
-
I have an old friend coming back to me. My PST, traded to Beerplumber over a year ago.
-
I have an old friend coming back to me. My PST, traded to Beerplumber over a year ago.
Gotta love the PST :tu:
-
I have an old friend coming back to me. My PST, traded to Beerplumber over a year ago.
Gotta love the PST :tu:
Pretty excited to have mine coming back. One of these days I'll try out a PSTII, I am curious about the scissors.
-
I have an old friend coming back to me. My PST, traded to Beerplumber over a year ago.
Gotta love the PST :tu:
Pretty excited to have mine coming back. One of these days I'll try out a PSTII, I am curious about the scissors.
Yeah, the scissors are nice and beefy compared to the scrawny ones we get now. I believe they are the same as the ones on the Original Wave (one of the other retired Leathermans on my wish list, along with maybe a PST just to have both). That and the fact it has the diamond file with that sharpening groove is a bonus. I like the diamond file, and I think the ideal PST hybrid for me would be the PST with that diamond file as I usually would have a SAK with scissors anyway.
-
24K Rebar
-
Sorry the pictures aren't all that great I used my iphone. plating is even throughout and a great color. I really like this tool so I will get a BO at some point. I got the gold handles only as id like to actually be able to use it when I carry it on my days off. time will tell how well this will hold up.
-
last few pictures
-
Beautiful bling that Rebar is :tu:
-
no comment :multi:
(http://i.imgur.com/iajvqc4.jpg)
-
Just got in a few Styles from the bargain Tesco deal. One for me, one for enk and one for my wife. Neat little tool, though I am glad I didn't pay full UK price for them.
-
Just got in a few Styles from the bargain Tesco deal. One for me, one for enk and one for my wife. Neat little tool, though I am glad I didn't pay full UK price for them.
:woohoo:
-
Just got in a few Styles from the bargain Tesco deal. One for me, one for enk and one for my wife. Neat little tool, though I am glad I didn't pay full UK price for them.
Got mine too!Price was right...for a change :D
-
no comment :multi:
(http://i.imgur.com/iajvqc4.jpg)
Very cool mate... 8) 8)
-
it is a 0102, but brand new, i opened the box.
(http://i.imgur.com/35JitJ2.jpg)
-
it is a 0102, but brand new, i opened the box.
Let me know if you find another.. ;) :gimme:
-
of course, this mighty tools might be in mighty hands.it has a feeling like a piece of cold solid steel, very different from new leathermans.
-
ST200's ROCK! :viking:
-
The latest is this grey Squirt E4. :mail: :D
-
My latest
(http://i40.tinypic.com/o5146x.jpg)
-
Thanks to Dunc,a PST2,dated 04/98-09/98
:multi:
-
Just got a Orange Fuse and LED Lenser H5 Headlamp. :tu:
-
Added the 30th anniversary ST300 and Micra set to my collection a couple of days ago :))
Sent from my GT-I9300 using Tapatalk 2
-
Added the 30th anniversary ST300 and Micra set to my collection a couple of days ago :))
Sent from my GT-I9300 using Tapatalk 2
Oh that's a nice set :tu: I like that Zippo too, very 8) set indeed. I didn't know it was available yet though.
-
Added the 30th anniversary ST300 and Micra set to my collection a couple of days ago :))
Sent from my GT-I9300 using Tapatalk 2
Oh that's a nice set :tu: I like that Zippo too, very 8) set indeed. I didn't know it was available yet though.
The Zippo was a giveaway from here last year, I always forget to put it in pictures but I thought it fitted pretty well in that one ;)
The anniversary sets hit the shelves in the UK the end of last week, mine arrived on Wednesday (I had it on order since March!) I know swissknife shop was advertising them in the US, appart from that let google do the searching ;)
-
Added the 30th anniversary ST300 and Micra set to my collection a couple of days ago :))
Sent from my GT-I9300 using Tapatalk 2
Oh that's a nice set :tu: I like that Zippo too, very 8) set indeed. I didn't know it was available yet though.
The Zippo was a giveaway from here last year, I always forget to put it in pictures but I thought it fitted pretty well in that one ;)
The anniversary sets hit the shelves in the UK the end of last week, mine arrived on Wednesday (I had it on order since March!) I know swissknife shop was advertising them in the US, appart from that let google do the searching ;)
Oh well it's still a cool Zippo :) Yeah I just looked it up on SKS and saw it there. A bit too pricey for my taste, and I'd have to not touch them or take them out of the box (which also looks nice). Plus I already have a Micra and Rebar, so I wouldn't have much use for them, although if I had plenty of $$ to spare, I'd definitely get it just to add to my collection. It's a very nice looking set, and would be a nice display type set.
-
Added the 30th anniversary ST300 and Micra set to my collection a couple of days ago :))
Sent from my GT-I9300 using Tapatalk 2
Oh that's a nice set :tu: I like that Zippo too, very 8) set indeed. I didn't know it was available yet though.
The Zippo was a giveaway from here last year, I always forget to put it in pictures but I thought it fitted pretty well in that one ;)
The anniversary sets hit the shelves in the UK the end of last week, mine arrived on Wednesday (I had it on order since March!) I know swissknife shop was advertising them in the US, appart from that let google do the searching ;)
Oh well it's still a cool Zippo :) Yeah I just looked it up on SKS and saw it there. A bit too pricey for my taste, and I'd have to not touch them or take them out of the box (which also looks nice). Plus I already have a Micra and Rebar, so I wouldn't have much use for them, although if I had plenty of $$ to spare, I'd definitely get it just to add to my collection. It's a very nice looking set, and would be a nice display type set.
I have a few Leathermans and this is just for part of the collection, to sit on the shelf next to my 25th anniversary Charge and a few other shelf queens I have :multi:
-
Newest addition to the collection. NIB Leatherman Mini, 0995 date code. :D
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P6140031_zps724ae2d7.jpg)
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P6140032_zpsa19282be.jpg)
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P6140034_zpsf8a8a9bf.jpg)
-
Newest addition to the collection. NIB Leatherman Mini, 0995 date code. :D
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P6140031_zps724ae2d7.jpg)
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P6140032_zpsa19282be.jpg)
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P6140034_zpsf8a8a9bf.jpg)
Neat!
It's going into your EDC rota :pok:
-
Newest addition to the collection. NIB Leatherman Mini, 0995 date code. :D
http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P6140031_zps724ae2d7.jpg
http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P6140032_zpsa19282be.jpg
http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P6140034_zpsf8a8a9bf.jpg
Neat!
It's going into your EDC rota :pok:
Not sure yet. It's so pretty. (http://i1255.photobucket.com/albums/hh627/enki_ck/Smiley/smitten.gif)
I might have to find a user and keep this one mint. :D You know, for the grandkids. ;)
-
8) score enki_ck! :tu: :)
-
Just got a Orange Fuse and LED Lenser H5 Headlamp. :tu:
I recieved an orange Fuse and LED Lenser H5 today also. Thanks for the Amazon link Captain. A Ford Econoline logoed PST came today also. :D
Added the 30th anniversary ST300 and Micra set to my collection a couple of days ago :))
Oh that is 8) Congrats! :tu: :)
-
Added the 30th anniversary ST300 and Micra set to my collection a couple of days ago :))
Sent from my GT-I9300 using Tapatalk 2
Gee...that's super...
...that's would feed my appetite for a month.... :D
-
8) score enki_ck! :tu: :)
Yes it was. :D 25,55 Euro ($34) + shipping.
http://www.ebay.de/itm/290921242333
How much do these go for new?
-
8) score enki_ck! :tu: :)
Yes it was. :D 25,55 Euro ($34) + shipping.
http://www.ebay.de/itm/290921242333
How much do these go for new?
That is a really good price. I have not been watching MINI's lately but my guess would be $50 to $100 for a NIB.
-
A shot of the orange Fuse and PST :)
-
Got a new Sidekick today! Opened it up and promptly nicked my finger with the small serrated blade! :multi:
-
Got a new Sidekick today! Opened it up and promptly nicked my finger with the small serrated blade! :multi:
Ah, the bonding experience! :angel:
-
The wife and my baby boy got me a SS Rebar and a stress gator. Couldnt be happier. +1 to the bosslady slipping that box past me in the mail. Happy Fathers day fellas. :salute:
-
The wife and my baby boy got me a SS Rebar and a stress gator. Couldnt be happier. +1 to the bosslady slipping that box past me in the mail. Happy Fathers day fellas. :salute:
Hey that's an awesome Father's Day gift for sure! Mine was the Juice KF4, but it was like 3 months early as I had to jump at the opportunity when it presented itself;)
Sent from my XT901 using Tapatalk 2
-
+1 there dude. Still dont own a juice model and from the raves and likes on the forum of the kf4 it seems the one to hunt for.
-
The wife and my baby boy got me a SS Rebar and a stress gator. Couldnt be happier. +1 to the bosslady slipping that box past me in the mail. Happy Fathers day fellas. :salute:
Nice gift! :tu: Happy Father's day!
-
+1 there dude. Still dont own a juice model and from the raves and likes on the forum of the kf4 it seems the one to hunt for.
It is definitely my favorite Juice. I had to jump at the chance 3 months ago as they don't seem to appear that often (in my experience), especially in barely used condition. I'm glad I did :D
-
I was on a road trip for work from Milwaukee WI to Kansas City MO. We stopped at the Bass Pro Shop in Altoona IA and I walked out with a Micra, a Squirt PS4, and a Brewzer.
-
I just ordered a Leatherman Wingman that comes with a Micra as well. It was a total of $32 including shipping.
I can't wait to get them. Currently i'm carrying a Juice S2 everyday.
-
A new (to me) k502. :drool:
It needed a bit of attention for the edge, but a few minutes with the Sharpmaker and I have a new bald patch on my arm. :D
(https://dl.dropboxusercontent.com/u/7765163/lmknife.jpg)
-
my mighty crunch came and i like it.
-
Another Flair. This one goes to my middle child, the chef :D
-
Brewzer, Mako Ti, Hail + Style PS :D
(http://img845.imageshack.us/img845/3784/0ea8.jpg) (http://imageshack.us/photo/my-images/845/0ea8.jpg/)
to be continued... :D
-
Got a like new Surge off bigmatt this morning. One solid tool!
-
Minitool 8)
(http://img.tapatalk.com/d/13/06/20/ynata5ev.jpg)
-
(http://img690.imageshack.us/img690/2906/o0bi.jpg) (http://imageshack.us/photo/my-images/690/o0bi.jpg/)
LM Piranha
(http://img405.imageshack.us/img405/290/krs2.jpg) (http://imageshack.us/photo/my-images/405/krs2.jpg/)
LM Raptor
-
Used Juice XE6 in Storm Grey arrived in the mail today! :multi:
-
Nice additions, guys. :tu:
U99, are you gonna use the Raptor or is it just for the collection?
-
Nice additions, guys. :tu:
U99, are you gonna use the Raptor or is it just for the collection?
Raptor went to my car. I hope there will be many opportunities to use it... ;)
-
Nice additions, guys. :tu:
U99, are you gonna use the Raptor or is it just for the collection?
Raptor went to my car. I hope there will be many opportunities to use it... ;)
i hope i won't too, when mine came.i am sure that i won't be in a nice situation when i need it.
-
Got my Style CS yesterday. Mainly bought it out of brand loyalty. They are kind of pricey. But looks great. Very nifty. Not sure how useful. Has a very nice "snap" to it though. :salute: Scissors are much better than :sak: IMHO but could be tighter. Bottle opener will get some emergency use. Nail file tool is surprisingly good as a phillips Screwdriver. :tu: Tweezers are ok. But I do have the same gripes about the blade as everyone else.
Going to team it up for EDC. Resqme which lives on my car key, utili-key will live with the house keys when it comes in.
Now I really want a Skeletool CX but I have no practical use for it. Hardly using my ST300. Wave is still going strong as at work though.
-
Got my Style CS yesterday. Mainly bought it out of brand loyalty. They are kind of pricey. But looks great. Very nifty. Not sure how useful. Has a very nice "snap" to it though. :salute: Scissors are much better than :sak: IMHO but could be tighter. Bottle opener will get some emergency use. Nail file tool is surprisingly good as a phillips Screwdriver. :tu: Tweezers are ok. But I do have the same gripes about the blade as everyone else.
Going to team it up for EDC. Resqme which lives on my car key, utili-key will live with the house keys when it comes in.
Now I really want a Skeletool CX but I have no practical use for it. Hardly using my ST300. Wave is still going strong as at work though.
You might be surprised on the Skeletool CX. I carried one for months and the tasks I was able to perform were ridiculously many. I highly recommend this tool - you won't be disappointed.
-
I see what you mean purely because it is so light and compact. I imagine it keeps a better edge. And teamed up with a bit kit would be sweet. I recently saw it advertised as "154CM Stainless Steel Clip Point/Sheepsfoot Knife (NOT COMBO BLADE)". But its not really a true sheeps foot blade is it?
-
A Charge TTi has joined my small LM family. Left to right: PST, PST II, old Wave, Supertool, new Wave, Rebar and Charge TTi.
(http://imageshack.us/a/img41/7424/qmn9.jpg)
-
Nice and shiny family. :2tu:
-
A Charge TTi has joined my small LM family. Left to right: PST, PST II, old Wave, Supertool, new Wave, Rebar and Charge TTi.
(http://imageshack.us/a/img41/7424/qmn9.jpg)
Nice family of Leathermans you got there:D
Sent from my XT901 using Tapatalk 2
-
A Charge TTi has joined my small LM family. Left to right: PST, PST II, old Wave, Supertool, new Wave, Rebar and Charge TTi.
(http://imageshack.us/a/img41/7424/qmn9.jpg)
:rofl: I only now noticed your PST is empty :D
-
Today at a flea market, I picked up a new in the blister pack PST ll (dated 0301)for $15. The pack hah moisture in it, there was a spot of rust on the pliers and the leather sheath had some of the green gunk on it. They both cleaned up nice. This PST ll has the large plier head with Leatherman USA cast into it.
I have 4 PST ll's, all different.
I also picked up a new in the box Victorinox Outdoorsman for $10. A good day at the flea market.
-
Today at a flea market, I picked up a new in the blister pack PST ll (dated 0301)for $15. The pack hah moisture in it, there was a spot of rust on the pliers and the leather sheath had some of the green gunk on it. They both cleaned up nice. This PST ll has the large plier head with Leatherman USA cast into it.
I have 4 PST ll's, all different.
I also picked up a new in the box Victorinox Outdoorsman for $10. A good day at the flea market.
Yeah, $25 for two brand new items isn't a bad deal at all:))
Sent from my XT901 using Tapatalk 2
-
Flea Market find Leatherman Charge TTI for $30
-
New ST300 with the old pst
-
That's a good find too Aloha. Man, I need to find me some flea markets apparently;)
Sent from my XT901 using Tapatalk 2
-
I have to get to a flea market!
-
:rofl: I only now noticed your PST is empty :D
Yup, but only temporarily - I've made this photo in the middle of modding attempt. It failed, and now PST is back to it's old self. He has got a thorough tools cleaning for a consolation :D
-
That's a good find too Aloha. Man, I need to find me some flea markets apparently;)
Sent from my XT901 using Tapatalk 2
Thanks. I was expecting him to say $70 so when he said $30 it was a no brainer for me as I have wanted one since first looking at LM. Flea Markets are hit and miss for me but the hits keep me going back.
-
a crunch. hold the mintberries.
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/v/1057917_10152020902078975_1214487565_n.jpg?oh=d5089089ec874703296e40c16baf27a9&oe=51CE9DAE&__gda__=1372535260_e400124eaa5fa9ef0b565a2403b2a76e)
i love it, but the case is meh.
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/v/1057113_10152020901898975_155275461_n.jpg?oh=f014a10b0540f3b7853d556203923232&oe=51CE97D7&__gda__=1372516842_225dc288e02df5db083614b75aacd3ae)
does not close properly. also there is play on both sides of the tool. i realize stuff sticks out of the tool a little, but still...
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc3/v/1057346_10152020901678975_1813392804_n.jpg?oh=1b740dce403f09238b537ac18567e8ff&oe=51CEB67B&__gda__=1372501653_4bf6c110204a59e31ddbcfbfa8582066)
when it does close, you can see the strain it puts on the snap, and one side bulges on the top and bottom.
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc3/v/1056933_10152020901378975_1057734998_n.jpg?oh=c57837a05296b0d622ce70beecfc3ecc&oe=51CE8EF1&__gda__=1372507935_3a7a1c326dda3d2528afc5d5dc18cdee)
but enough about the sheaths. the family welcomes the crunch.
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/v/1061076_10152020924813975_2059414571_n.jpg?oh=c2342020f27205fc013ddbd0c43fe976&oe=51CE9403&__gda__=1372535281_e84bfd393cd26fb0b9964092b27369fd)
-
Like the Vic mini driver on the Flair!
-
heh, thanks. it came off a fake SAK i literally found in a parking lot, looked to have fallen out of a high window. the corkscrew was bent but somehow this lil screwdriver made it fine, and, it's of a decent enough quality to use without re-grinding it.
-
Agonistes it looks like the wrong sheath did you pick it up used? Then again I could be a moron :tu:
-
Agonistes it looks like the wrong sheath did you pick it up used? Then again I could be a moron :tu:
no, it's new but she had to rummage around with the box and when i got it home it had two instruction booklets for a crunch, a small booklet of SOG products, and the product registration paper. they have their display all laid out on river stones in a display case so she probably did give me the wrong holder. she didn't sell me the display model, but i can see how easy the mistake is if you dont know much about the products. i'll go ask about it tomorrow.
-
Yea most of the ppl behind the counter dont know much thats just where their stuck 4 the day
-
true. most of their business comes from uniforms and insignia and cop gear. but they do have some really nice high end kit.
-
Im sure u get the right person like the boss or owner they would know their stuff but your average min wage employe probly not..........and I quote "the box, the leather belt snappy thang and the tool all say the same thang...yupp thats right"
:facepalm:
-
actually i do know the store manager, and they are all pretty nice there, i don't anticipate any trouble getting it sorted. should have looked in the box before i left, is all. i thought, surely leatherman did not mean for this to be the sheath. but who knows what the inventory looks like?
-
Yea im sure if you show em that they will figure out something . It almost looks like it fits a wave or something of that size. I got lucky when I bought my surgevat bass pro it was a display model and the just told me go pick one off the shelf (they stock leatherman sheaths) so who knows you might get the one you want.
-
Yea im sure if you show em that they will figure out something . It almost looks like it fits a wave or something of that size. I got lucky when I bought my surgevat bass pro it was a display model and the just told me go pick one off the shelf (they stock leatherman sheaths) so who knows you might get the one you want.
Sure could use a Bass Pro Shop around here. Lucky dude you are FordMech. It would be great to pick and choose the sheath you like. Ive tried the Tractor Supply store and the Army/Navy shop around here and no luck buying a sheath on its own. I was looking for this LM grey nylon sheath for a few sheathless MT's.
I do hope your new Crunch finds a holster Agonistes. I wonder what was given to you. Here is a link to the LM site for Premium leather sheath. A Premium nylon sheath fits the Crunch as well. The retail #'s are listed incase you have to walk the clerk thru it.
http://www.leatherman.com/accessories/product/Premium_Leather_Sheath_I
http://www.leatherman.com/accessories/product/Premium_Nylon_Sheath_I
The internal capacity with the standard leather sheaths differs a bit,but not by much.4" x 1.5" x .6" and 4.2" x 1.4" x .8"
I'd mix up the sheaths cause you really cant tell any difference at a glance. Before my molle sheath EDC carry and pocket clips, the standard leather sheaths l & V were the EDC. They housed the Kicks, Fuse and SS Blast at that time. The Blasts screws would catch the bottom rivets of the l-4" sheath. I always thought it was a QC blunder till I looked it up. Took a picture of the two standard leather sheaths for compairison. Also the grey nylon sheath im lookin for around town.
I hope this helps out. Or if its already taken of im sure someone can make use of this. Its way off topic so moderators please move if need be.
-
Picked this little chap up at a Carboot sale this morning :multi:
(http://i112.photobucket.com/albums/n184/sparky_415/stuff%202013/SideClip.jpg) (http://s112.photobucket.com/user/sparky_415/media/stuff%202013/SideClip.jpg.html)
:D
-
+1 Sparky. nice score
-
+1 Sparky. nice score
What he said.. :tu:
Looking forward to the "after" pics.. :)
-
Don't waste your time on that dirty old thing. :td: I'll give you a tenner for it. :whistle:
:D
-
Crunch I found on my local Craigslist
-
+1 Sparky. nice score
What he said.. :tu:
Looking forward to the "after" pics.. :)
:ahhh :ahhh :viking:
-
Enki, It wouldn't be fair for me take advantage of you :rofl: and double my money
I caught it earlier basking in the sun after a hot soapy bath :D
(http://i112.photobucket.com/albums/n184/sparky_415/stuff%202013/30062013014.jpg) (http://s112.photobucket.com/user/sparky_415/media/stuff%202013/30062013014.jpg.html)
-
Very nice tony :salute:
-
Enki, It wouldn't be fair for me take advantage of you :rofl: and double my money
I caught it earlier basking in the sun after a hot soapy bath :D
(http://i112.photobucket.com/albums/n184/sparky_415/stuff%202013/30062013014.jpg) (http://s112.photobucket.com/user/sparky_415/media/stuff%202013/30062013014.jpg.html)
:ahhh :o :ahhh
Better go and post in the "Best deal you ever got on a multitool" thread. :D
Way to go :cheers:
Very cool picture too. :2tu:
-
Just got my Leatherman Crater c33. Nice and very sharp knife :tu:
-
Here are some pics of the Crater.
Sent from my XT901 using Tapatalk 2
-
Cool knife!
-
That's a good find too Aloha. Man, I need to find me some flea markets apparently;)
Sent from my XT901 using Tapatalk 2
same here... if we had flea markets that sold mt,s i'll get a 6 pack o' beer and just spend my entire weekend combing through those shacks
-
Just received a BO Kick with side clip+ SS Micra combo from ebay auction for super sweet price. Both tools in excellent condition :D
Στάλθηκε από το XT320 μου χρησιμοποιώντας Tapatalk 2
-
A charge TTi, 2013 new version
-
A nice Juice Pro, with a belt clip (not shown)
-
The Squirt PS4 was traded back to me this morning by the boss lady. She wanted the Style PS for its lighter weight and carabiner for easy deployment off the key ring. So in a sense the PS4 is my latest LM tool.
-
I recently scored this awesome little torx PS4 thanks to mr getahl. :tu: :tu:
(http://farm6.staticflickr.com/5501/9091720174_c3a164c83e.jpg) (http://www.flickr.com/photos/drjohnzoidberg/9091720174/)
-
Sweet :multi: bro.
-
A black Style arrived today. :cheers:
-
Little background. I like to have nice things, but get it right the first time. After I get a couple things, others that are envious end up with them as gifts from me. So I went from ~28 various Leatherman's to just my 2013 Charge TTI. Already started customization on her and low and behold, another friend is already eyeing it. NOPE. Going to keep this one for the long haul.
I have ~100 Grams of 18k Yellow Gold I am debating on using as the scales on the TTI, or make a key ring out of it, or a combination of the two.
The 24k plated one I see offered looks great, but I would want it to be Black and Gold. So I have been debating on wether to 18k Plate the non tool parts on the knife, then coat the blades, pliers, tools in a black finish of some sort.
On my 2013 Charge TTI, I started the modding->
1. I took the screws out of the blade mounting point/ plier pivot point and inverted them so the actual "screw" is on the side of each of the blades. This serves the purpose of being able to adjust the tension on the blade for easier or harder deployment of the blades while maintaining the desired tension on the oposite side.
2. Anodized the titanium scales "Gold"
In the pics of the "Gold", the Wire Ingot Mould I have only does ~75g / pour or you end up with a huge mess and the ingot becomes un manageable to work with.
In the Anodized Gold Aluminum pill vial, I can fit $1k in $100's. The Ring is Copper. The Pendant is Silver. Keys are mostly brass, cuff key is stainless steel if I remember correctly.
In anodizing the multitool scales, I did my wedding band and my TISSOT T-TOUCH EXPERT, just to see what colors I could produce. Not pictured is the set of Snow Peak fork, knife, spoon, spork, that I anodized also.
(http://imageshack.us/a/img856/4159/svw3.jpg)(http://imageshack.us/a/img197/8725/uouz.jpg)(http://imageshack.us/a/img600/6154/5f.jpg)(http://imageshack.us/a/img341/9447/f5dy.jpg)(http://imageshack.us/a/img843/6608/o7wj.jpg)(http://imageshack.us/a/img841/5562/jjk3.jpg)(http://imageshack.us/a/img850/5777/q8wv.jpg)
I traded in my old worn out Leatherman to REI for the newer style.
-
Very cool post and :drool: worthy multi.
Welcome to the forum. :cheers:
-
Very cool TTi there Skygear :tu:
-
A swwwweeet BO cap crimper st 200, a mint 2003 wave (that I am going to the apart and get BO'd), and soon a CC BO PST (very rare indeed)
-
A swwwweeet BO cap crimper st 200, a mint 2003 wave (that I am going to the apart and get BO'd), and soon a CC BO PST (very rare indeed)
i have black cam crimper st200 and i love it.
-
Who is BO (Black Oxide) the parts for you? I was going to pick up a cold kit off the net. Then I realized if I want any REAL protection, it needed to be the "HOT" process at 285º
-
Crunch! :)
-
Crunch! :)
:2tu:
Nice. :D
-
Crunch! :)
That is sweet. 8) What year is that from? The package is as cool as the tool.
-
Crunch! :)
That is sweet. 8) What year is that from? The package is as cool as the tool.
There is not a date on the outside of the package. In the storyline it mentions being 25 years from 1975. So I'm assuming 2000. I haven't opened it yet to check the date code on the Crunch. Yes the packaging on this is one is 8) and the main reason I bought it. I didnt really need another Crunch. :D
-
Yesterday I picked up a new in blister pack black OHT, for $40. I had to drive 60 miles to get it but it was worth it. I'm still not sure if I like it or not. To big for EDC.
-
BO Cap Crimper PST!!! it's even more mint than my BO PST.
(http://img.tapatalk.com/d/13/07/10/yjurahe9.jpg)
(http://img.tapatalk.com/d/13/07/10/ysuretes.jpg)
-
Nice PST Metro :tu:
-
Rebar
(http://img.tapatalk.com/d/13/07/10/uha8enev.jpg)
-
Nice Rebar Colt ;)
-
Very cool additions, guys. 8)
-
Mmmmmm synthetic handle LM Ukiah.
Such a nice blade and my first fixed blade!!
(http://img.tapatalk.com/d/13/07/12/zytevypu.jpg)
(http://img.tapatalk.com/d/13/07/12/qe8uhugu.jpg)
-
That's a sweet looking knife Metro 8)
-
Metro, what is in the back part of the sheath? the round thing? PIC?
-
Metro, what is in the back part of the sheath? the round thing? PIC?
This? It's a field diamond blade/fishing hook sharpening tool. It's waterproof and there is an extra o ring in the handle. Very clever!
(http://img.tapatalk.com/d/13/07/13/ysara4a6.jpg)
-
Yep, thats the "thing" I was referring to. Definitely innovative.
-
Metro, what is in the back part of the sheath? the round thing? PIC?
This? It's a field diamond blade/fishing hook sharpening tool. It's waterproof and there is an extra o ring in the handle. Very clever!
(http://img.tapatalk.com/d/13/07/13/ysara4a6.jpg)
I'd buy that sharpening tool if it was available. Looks very cool. :tu:
-
I'd buy that sharpening tool if it was available. Looks very cool. :tu:
It went the way of the dodo when the Ukiah and Steen line vanished.
I did manage to find a Wrench/Diamond file for the LM Genus so there is some hope that there are some floating around.
-
This is my latest multitool: (http://i1124.photobucket.com/albums/l562/lacket/17aebbba12514bce12dd3f08e4833a7c.jpg) not a LM so I eat it.
Lacket
-
...
This is my latest multitool: (http://i1124.photobucket.com/albums/l562/lacket/17aebbba12514bce12dd3f08e4833a7c.jpg) not a LM so I eat it.
Lacket
.....a SAK with expiry date..now..that's new :o
-
I just received a PST today :D One more checked off my want list :tu: Pics will be posted later.
-
Received P4 today, juice XE6 on the way
Sent from my SPH-L720 using Tapatalk 2
-
Here are some pics of the PST. I'm a bit disappointed that it's a later model with the newer, larger pliers though. The seller's pic showed the older style, but he had a few in stock, so I'd say he had some like mine. Oh well. I can eventually get another one if I really want to. There's really nothing wrong with it, it's in great condition, but those pliers just don't seem to belong on a PST imo. It's also got conflicting date codes. One handle is 0797, and the other is 0304 (which I think is the correct one due to the pliers). Second pic has PSTII behind PST. Notice the PSTII opens slightly further than the PST. Another odd note: the Phillips driver is the older style, but it's on the handle with the 0797 datecode??? PST's has a D on it and PSTII's has a 6. Not sure what that means. The file isn't bad though. I can use the finer side as a nail file, which I didn't think would work.
Sent from my XT901 using Tapatalk 2
-
Here's a pic of the bottom. Looks like it was either used as a hammer or dropped from high up.
Sent from my XT901 using Tapatalk 2
-
Just got back 3 waves, a MUT and a BO ST200 from leatherman.
-
I Just got another regular wave. Starting to do my tweaks as a gift for a friend.
-
Early model PST from Lowtech.
Nothing like a cobweb classic
-
Just got my first juice, an XE6.
I like it, and hope to get an S2 one day. If I am lucky a KF4 to join the family
Sent from my SPH-L720 using Tapatalk 2
-
Yesterday, I just ordered 2 of the new Skeletool SX's from Signal Snowboards. Should be arriving in a number of days :multi:
http://signalsnowboards.com/leatherman-skeletool-sx
-
Just picked this up a few days ago... Carried it ever since and so far I'm loving it ALOT!
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/ChargeTTi01_zpsb6374cb0.jpg)
The new Charge TTi along with the rest of the family...
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/LMFamilyPhoto01_zpse9f1fe28.jpg)
CB
-
The new Charge TTi along with the rest of the family...
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/LMFamilyPhoto01_zpse9f1fe28.jpg)
CB
Nice LM family group photo :tu:..would need some colours of camo's, anodised Alums and BO's to add ons >:D
-
:drool:
-
I have no money so I have no new tools, but I did glet a set of rebar handles the other day and I smurfed up the whole job when I tried to put a blast plier in them. I need something to tighten the damn pivots without screwing them up.
So I guess you could say I have a blast-bar, but it doesn't work.
-
Finally got a Charge TTi. :tu:
-
Cleaned this gem from my big box of TSA claimed discards. A hot bath, some wd40 to clean up the joints and then some mineral oil to finish.
Near mint! Only had some gunk on the outside.
KF4!
(http://img.tapatalk.com/d/13/07/22/jagu7epu.jpg)
(http://img.tapatalk.com/d/13/07/22/3y2a6u3e.jpg)
(http://img.tapatalk.com/d/13/07/22/huhyty6a.jpg)
(http://img.tapatalk.com/d/13/07/22/esujeta9.jpg)
-
Nice score on that one Metro :tu:
-
Nice score on that one Metro :tu:
I have another KF4 that isn't in such good shape. I am totally going to rip it apart and make another silver KF4S.
-
Nice score on that one Metro :tu:
I have another KF4 that isn't in such good shape. I am totally going to rip it apart and make another silver KF4S.
Oh nice, is that the one with scissors in place of the saw? That's what I wish I had on mine.
-
Nice score on that one Metro :tu:
I have another KF4 that isn't in such good shape. I am totally going to rip it apart and make another silver KF4S.
Oh nice, is that the one with scissors in place of the saw? That's what I wish I had on mine.
Yup. I think I may try something different and mill an awl from a can opener. It seems to sit better with the scissors.
-
Nice score on that one Metro :tu:
I have another KF4 that isn't in such good shape. I am totally going to rip it apart and make another silver KF4S.
Oh that's cool. I bet you make it sharper than the Juice awl. Those aren't sharp at all, although I found it makes for a good nail cleaner, but I'd rather have a sharp awl.
Oh nice, is that the one with scissors in place of the saw? That's what I wish I had on mine.
Yup. I think I may try something different and mill an awl from a can opener. It seems to sit better with the scissors.
-
Oh that's cool. I bet you make it sharper than the Juice awl. Those aren't sharp at all, although I found it makes for a good nail cleaner, but I'd rather have a sharp awl.
Yah, I'll mill a nice convex cutting edge so I can keep on sharpening.
-
Got this baby today:
Leatherman Juice Pro
(http://img.tapatalk.com/d/13/07/25/uhequsy9.jpg)
Sent from Endor via Schlapatok
-
Nice! :drool:
-
I have no money so I have no new tools, but I did glet a set of rebar handles the other day and I smurfed up the whole job when I tried to put a blast plier in them. I need something to tighten the damn pivots without screwing them up.
So I guess you could say I have a blast-bar, but it doesn't work.
I was wondering if you ever got around to putting that together.
-
What im currently building, i plan to use plasti dip black paint to cover the handle section and a rebar head plier, match to a 2012 wave body, cant wait to see if the result are going to match the drawing
(http://ep1.pinkbike.org/p4pb9934216/p4pb9934216.jpg)
-
I have no money so I have no new tools, but I did glet a set of rebar handles the other day and I smurfed up the whole job when I tried to put a blast plier in them. I need something to tighten the damn pivots without screwing them up.
So I guess you could say I have a blast-bar, but it doesn't work.
I was wondering if you ever got around to putting that together.
It's together alright, but I still haven't finished it. I just need to figure out how to get everything together without galling the knurled heads on those pivots. I only have one spare set so I have to get it right!
-
(http://img.photobucket.com/albums/v601/Veetec/LMPulse_zps325c9a78.jpg) (http://smg.photobucket.com/user/Veetec/media/LMPulse_zps325c9a78.jpg.html)
-
Forgot to post the new addition. The Surge.
-
(http://img.photobucket.com/albums/v601/Veetec/LMPulse_zps325c9a78.jpg) (http://smg.photobucket.com/user/Veetec/media/LMPulse_zps325c9a78.jpg.html)
Nice Pulse :tu: I want one of those myself eventually.
-
Nice Pulse Monrouge.
Sweet choice Bensasupertool. The Surge is my favorite.
-
30th anniversary set, Raptor, CAM, and Piranha.
(http://img.tapatalk.com/d/13/08/10/tatesydy.jpg)
-
Nice Pulse Monrouge.
Sweet choice Bensasupertool. The Surge is my favorite.
Ha, thanks, but unfortunately it's not mine :( I quoted Dr. Bahn's pic. Someday I will have one though, and hopefully NIB.
And nice haul there Metro :tu:
-
My bad. Hopefully you will get one soon.
-
What im currently building, i plan to use plasti dip black paint to cover the handle section and a rebar head plier, match to a 2012 wave body, cant wait to see if the result are going to match the drawing
(http://ep1.pinkbike.org/p4pb9934216/p4pb9934216.jpg)
so i build this today and it wasnt as easy as i thought, i paint it but because it stainless steel polish it didnt hold as well as i thought it would , i ll post some photo tomorrow, also the rebar head , doesnt fit that easely in the wave body, it needed some serious mods and grinding, lets just say you better know the proper tightnening spec of the tool before taking it aparts,
-
This morning I picked up a mint PST (no date stamp) with a mint sheath for $10 at a local flea market.
That is what keeps me going back week after week.
-
Killer find! :tu:
-
This morning I picked up a mint PST (no date stamp) with a mint sheath for $10 at a local flea market.
That is what keeps me going back week after week.
Wow, $10 for a mint PST? That's an awesome find indeed :tu:
-
This morning I picked up a mint PST (no date stamp) with a mint sheath for $10 at a local flea market.
That is what keeps me going back week after week.
Wow, $10 for a mint PST? That's an awesome find indeed :tu:
that is a steal for ten bucks. Ive paid ten bucks for a new PST sheath alone. What a deal. That Pulse is sweet. Id even frame the box and hang it on the wall. I'd like to have a Pulse but I own a ST200 and Im not a big fan of the lock release on it. Still the Pulse is a very nice multi and would be a fine addition to the retired LM collection.
@ducttapetech The Surge is really becoming my favorite LM. The outboard tools are a big deal to me. The sissors alone can stand next to Victorinox sissors IMO. If they can snip paracord with no effort their a winner to me. Cant wait for the new version of Surge.
I wonder what mod Eric is gonna do to the 30th anniversary tools? Blunt nose Micra?
-
This morning I picked up a mint PST (no date stamp) with a mint sheath for $10 at a local flea market.
That is what keeps me going back week after week.
Wow, $10 for a mint PST? That's an awesome find indeed :tu:
that is a steal for ten bucks. Ive paid ten bucks for a new PST sheath alone. What a deal. That Pulse is sweet. Id even frame the box and hang it on the wall. I'd like to have a Pulse but I own a ST200 and Im not a big fan of the lock release on it. Still the Pulse is a very nice multi and would be a fine addition to the retired LM collection.
@ducttapetech The Surge is really becoming my favorite LM. The outboard tools are a big deal to me. The sissors alone can stand next to Victorinox sissors IMO. If they can snip paracord with no effort their a winner to me. Cant wait for the new version of Surge.
I wonder what mod Eric is gonna do to the 30th anniversary tools? Blunt nose Micra?
I won't be doing anything to those tools ;)
I have a bit of a disdain for the Micra, never found any of the tools that useful (for me at least)
-
i got a juice. pictured here with awesome flashlight i also picked up, it's a nebo redline.
(https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/v/1147876_10152126003773975_123354566_o.jpg?oh=e80cd48dbebac403d6d150662db63d58&oe=52097C4A&__gda__=1376376802_8db4f3c06c22833d27a92b054dd5c4c7)
except neither fit my skinth. time for a new one..... :whistle:
edit: i am STILL waiting on my raptor.
-
I got a mini tool and a wave today
-
Nice Buys Aloha. :multi: What do you think of them?
-
I think the mini tool is a killer little plier its simple and functional and the fold out handles are great. the wave is also pretty sweet but I don't get why all the flat drivers, tho I love the larger scissors. I have a new wave and love that tool so I can imagine this older wave being much the same minus the exchangeable bits which I do use often. great lines and slimmer in some respect too. Im pretty stoked to have 2 retired LMs an now I don't want to use them. :-\
-
I think the mini tool is a killer little plier its simple and functional and the fold out handles are great. the wave is also pretty sweet but I don't get why all the flat drivers, tho I love the larger scissors. I have a new wave and love that tool so I can imagine this older wave being much the same minus the exchangeable bits which I do use often. great lines and slimmer in some respect too. Im pretty stoked to have 2 retired LMs an now I don't want to use them. :-\
Nice score man :tu: Did you also get these at the flea market? I've always been a little curious about the Mini as it would be a good option for having 2 sets of pliers without the second one taking up a bunch of space. I want an Original Wave as well, and I'm hoping to make that my next purchase. I know that the flat drivers seem a bit much, but maybe that's all that would work in the space at the time? I think I'll probably file one of them down to be an awl as I don't need 4 flatheads. Either the small or medium one as I want to keep the large and tiny one. I do know that the retired Leathermans can be addictive. I also want a Pulse.
-
Wave,date coded 10/11-11/11 from 21productionz.
Nice to have a working Wave again :D
-
@monrogue i had a great day at the fleamarket on sunday.
i posted what i found with some quickly taken pictures. i think the mini would be a great 1st or 2nd (backup) plier with a SAK to compliment it of course. its a cute little MT that's feels very sturdy in hand. i wish the case was with it but im sure i can find one on fleabay. the wave is pretty cool too mine is dated 0303A and seems in great very light used condition. it didn't have any rust at all which was nice. im not sure what to do with it in terms of using or not using. i guess ive turned into a bit of a collector in some regards as i now feel like i also want to hunt down LM retired tools. we'll see where this goes because as easily as it is to plunk down $$$ for items on fleabay in love the hunt even more and even more than that is getting them for dirt cheap. i got both for $25, $20 for the wave and $5 for the mini.
-
Wave,date coded 10/11-11/11 from 21productionz.
Nice to have a working Wave again :D
i saw his sale post on this, glad you have it and it'll see use. 21 has some tempting items for sale still.
-
Wave,date coded 10/11-11/11 from 21productionz.
Nice to have a working Wave again :D
i saw his sale post on this, glad you have it and it'll see use. 21 has some tempting items for sale still.
He's dead on to deal with :pok:
-
I think the mini tool is a killer little plier its simple and functional and the fold out handles are great. the wave is also pretty sweet but I don't get why all the flat drivers, tho I love the larger scissors. I have a new wave and love that tool so I can imagine this older wave being much the same minus the exchangeable bits which I do use often. great lines and slimmer in some respect too. Im pretty stoked to have 2 retired LMs an now I don't want to use them. :-\
Yes the flat drivers are a bit redundant. Then again it wouldnt be an old Leatherman. The old Waves have a great compact feel for a full size multi. I love the aesthetics on the old wave. It was a user when I got it. Great condition for a user. It was a Paramedics tool that passed away.Myself a first responder I feel the need to keep that tool in use cause it could have saved someone.
I havent spent much time with the mini tool. Thats the wifes LM. I onlt get a hold of it for pictures for the forum. It would be a great companion to a SAK. Thats a good idea Aloha. If you decide to put a split ring on the mini be careful. The wife crunched a few opening and closing the mini.
+1 scoring the tools at your flea market. Thats gotta be a cool feeling finding retired LM's in the flesh. Ebay hunts are fun,but a physical find seems more rewarding.
-
I recently got my self a used PST. I engraved my name into it and use it as a loan out tool at work.
Every now and then someone pops their head into my office asking if I have pliers, or a phillips drive, or some other tool they can borrow for a couple of minutes. I hate loaning out one of my edc tools, as they tend to be gone longer than just a few minutes, so I keep this one in my backpack for those occations. (and sometimes I need to use it my self too :D )
-
I found a used crunch on ebay. It had some rust but after a little polishing it looks like new. The blade is in a bad shape though and i am going to replace it by something else. Not sure if i really need a blade on the crunch so it's still up to debate what tool to put in.
-
I found a used crunch on ebay. It had some rust but after a little polishing it looks like new. The blade is in a bad shape though and i am going to replace it by something else. Not sure if i really need a blade on the crunch so it's still up to debate what tool to put in.
Hmmm... Would scissors fit?
-
picked up a wingman at the hardware store; i swear i only went in for paint. but it is a nifty little tool, i used it later to open paint cans (the one thing i have used leatherman flatheads for almost exclusively). i'm loving the box opener. i want one on every tool i own.
-
picked up a wingman at the hardware store; i swear i only went in for paint. but it is a nifty little tool, i used it later to open paint cans (the one thing i have used leatherman flatheads for almost exclusively). i'm loving the box opener. i want one on every tool i own.
That's the only useful tool on the Wingman IMHO
-
I got a deal I couldn't refuse on a black oxide Rebar.
I have not used it yet.
all I can say about it is that I think it may be the smoothest opening Leatherman I've owed.
I also like the size and weight.
it should be a great tool.
:)
-
Just got a Rebar myself, though it's not standard as (I suspect) it's been made up from the leftovers from someone's Wave mod. ;)
(http://gallery.multitool.org/pbmirror/Personal/ForSale/2013-07-01_16-32-26_250_zps870b588a.jpg)
(http://gallery.multitool.org/pbmirror/Personal/ForSale/2013-07-01_16-32-17_786_zpsd1d39336.jpg)
TBH I'm just fine with that as I've never had a problem with the old LM pliers head. :)
-
Sweet, enjoy your Rebars fellas :tu:
-
Sweet, enjoy your Rebars fellas :tu:
I got her on my belt today.
it's a little light for a work tool but just right for my after work gear.
-
Just got a Rebar myself, though it's not standard as (I suspect) it's been made up from the leftovers from someone's Wave mod. ;)
...
(http://gallery.multitool.org/pbmirror/Personal/ForSale/2013-07-01_16-32-17_786_zpsd1d39336.jpg)
TBH I'm just fine with that as I've never had a problem with the old LM pliers head. :)
I like your Rebar much more than the standard one. :D Looks improved to me. :P
-
I happen to like the stock Wave pliers, however I'm holding out on replacing my Wave until that executive version comes out with the new heads...
-
I happen to like the stock Wave pliers, however I'm holding out on replacing my Wave until that executive version comes out with the new heads...
What's this "executive" version of which you speak ???
-
I happen to like the stock Wave pliers, however I'm holding out on replacing my Wave until that executive version comes out with the new heads...
What's this "executive" version of which you speak ???
Somebody posted it in another thread. I don't have any more info on it.
-
I happen to like the stock Wave pliers, however I'm holding out on replacing my Wave until that executive version comes out with the new heads...
What's this "executive" version of which you speak ???
Somebody posted it in another thread. I don't have any more info on it.
Hmm....I wonder what it is then :think:
-
I am waiting on the new Surge, with the head from the ST300, I have not heard of anything on the wave.
:think:
-
Nothing fancy but I just bought a Piranha to keep with my Wave company in
the pouch and open beer bottle caps quicker.
-
Wave and ST300. :mail:
-
:facepalm: Why, WHY did I sign up to get a monthly coupon from the local outdoor store? ;)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1971_zps3cd20602.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF1971_zps3cd20602.jpg.html)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1972_zps5fa275a0.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF1972_zps5fa275a0.jpg.html)
Charge AL. Love it already. :tu:
-
that sure is a beauty, enjoy it.
-
:facepalm: Why, WHY did I sign up to get a monthly coupon from the local outdoor store? ;)
...
To get a discount on nice toys. :D
Nice one. :tu:
-
Nice one. The Charge AL is my favorite one and the only one I have! :D
:facepalm: Why, WHY did I sign up to get a monthly coupon from the local outdoor store? ;)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1971_zps3cd20602.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF1971_zps3cd20602.jpg.html)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF1972_zps5fa275a0.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF1972_zps5fa275a0.jpg.html)
Charge AL. Love it already. :tu:
-
Original Supertool dated 01/01 & 04/01 in pretty great condition I think. its not quite in my hands but my shipment point was kind to send these pictures. I am SuperSToked
-
Nice Charge AL JD, and nice SuperTool Aloha :tu:
-
Got my freestyle from Monrogue today, so this now completes my skeletool setup, but I noticed one thing, the freestyle has a 50/50 blade, and the skeletools is just plain, so I just might swop them out, only one prob, I only have one #8 torx, so it's going to be a little hard,, JR
(http://img.photobucket.com/albums/v196/mrssabrina/e5ac72025fc5e45e830289b97f52b97e_zpsa2ff8fac.jpg)(http://img.photobucket.com/albums/v196/mrssabrina/328bd4d275d3705dd3de27cacecdafef_zps75333960.jpg)
(http://img.photobucket.com/albums/v196/mrssabrina/2afb14e82c7ed2df51f0a878dcd33e13_zps80be5ba2.jpg)(http://img.photobucket.com/albums/v196/mrssabrina/DSC01941_zps045e4c32.jpg)
-
Got my freestyle from Monrogue today, so this now completes my skeletool setup, but I noticed one thing, the freestyle has a 50/50 blade, and the skeletools is just plain, so I just might swop them out, only one prob, I only have one #8 torx, so it's going to be a little hard,, JR
(http://img.photobucket.com/albums/v196/mrssabrina/e5ac72025fc5e45e830289b97f52b97e_zpsa2ff8fac.jpg)(http://img.photobucket.com/albums/v196/mrssabrina/328bd4d275d3705dd3de27cacecdafef_zps75333960.jpg)
(http://img.photobucket.com/albums/v196/mrssabrina/2afb14e82c7ed2df51f0a878dcd33e13_zps80be5ba2.jpg)(http://img.photobucket.com/albums/v196/mrssabrina/DSC01941_zps045e4c32.jpg)
Glad you got it! Would the Skeletool blade fit? It looks a little broader, but only a slight bit, so maybe not an issue? I wouldn't know though, so I hope it works for you man :tu:
-
Update on my Supertool I got today. :mail: :ahhh
its beautiful and in much better condition than I thought judging from the pictures. it looks to have been carried only or very gently used with the exception of the small driver which is a bit dinged. over all im super stoked and couldn't be happier YAY me.
-
Awesome Aloha007. I love getting a new tool that you are instantly happy with. :tu:
-
Got these from Monrogue today
Charge al and wave
Sent from my SPH-L720 using Tapatalk 2
-
Got these from Monrogue today
Charge al and wave
It's an AL kind of day! :tu:
-
Awesome Aloha007. I love getting a new tool that you are instantly happy with. :tu:
yeah especially since this was my first fleabay buy. 12 years old and in great condition makes me a happy MT guy.
@detron DUUUUUUUDE those look killer, the Charge Al is a sweet tool enjoy them.
-
Awesome Aloha007. I love getting a new tool that you are instantly happy with. :tu:
yeah especially since this was my first fleabay buy. 12 years old and in great condition makes me a happy MT guy.
@detron DUUUUUUUDE those look killer, the Charge Al is a sweet tool enjoy them.
Aloha, Those two from Monrogue are excellent!! super clean! the ONLY issue was the Wave wire cutters meet before the pliers, not real bad, just a little, but 3 light swipes with the file on my Surge and it was gone. Like new now. I am super happy with my purchase :ahhh :ahhh :ahhh
-
Awesome Aloha007. I love getting a new tool that you are instantly happy with. :tu:
yeah especially since this was my first fleabay buy. 12 years old and in great condition makes me a happy MT guy.
@detron DUUUUUUUDE those look killer, the Charge Al is a sweet tool enjoy them.
Aloha, Those two from Monrogue are excellent!! super clean! the ONLY issue was the Wave wire cutters meet before the pliers, not real bad, just a little, but 3 light swipes with the file on my Surge and it was gone. Like new now. I am super happy with my purchase :ahhh :ahhh :ahhh
Glad to see my babies made it safely :tu: It's funny seeing them in a pic belonging to someone else. I'm glad you're happy with them :tu: I never used them much at all honestly, and definitely nothing abusive or dirty, so probably the only thing in them was pocket lint ;)
-
@ detron the capt said it best " I love getting a new tool that you are instantly happy with." I knew Monrogues MTs would be solid, my wave however gets the crap kicked out of it daily but that's why I love it.
funny how Jerseydevil got an AL today too. as ive said ill eventually get one I just have to quench this retired MT thirst first.
-
@ detron the capt said it best " I love getting a new tool that you are instantly happy with." I knew Monrogues MTs would be solid, my wave however gets the crap kicked out of it daily but that's why I love it.
funny how Jerseydevil got an AL today too. as ive said ill eventually get one I just have to quench this retired MT thirst first.
Though I mean this as a joke, the sad fact that it is possible might put a little fear into you.
retired tools will always be retired, but current tools will become retired tools at some point. be careful you do not ever get to buy what is out there at good prices. the Juice KF4 cost just as much, if not more now than when it was first out. The Genus and other similar tools cost more now than when they were released.
Let's say Rebar production stops due to some QC issues that cannot be fixed. what do you think would happen to those prices? :think:
-
I was told a long time ago by a father of a school mate if I am going to collect I should collect what i love regardless of the value, be it today or in the future. he was a stamp collector himself and was getting his son into stamp collecting. I really never thought of "collecting" till I got my used charge TTi. I considered myself more a user and I was just acquiring these tools to use eventually. I began to wonder about the stories these tools had and what they have done and seen and meant to their original owners.
im not solely buying for their future value, honestly if i was solely interested in value or potential value id go after the al mars or Kershaw a100 type tools. sure they may or may not be of value into the future, they may loose value in terms of what i paid for them but my kids will know they meant something to me and that is important. hell my kids may have a fire sale once im gone and give these things away.
every tool seems to have been purchased with a purpose in mind other than monetary or projected value at least coming from the original owners point of view ( in most cases ). the tools were bought or gifted to serve and hopefully they did. it would be cool if all tools were passed on to someone like a kid or friend but in a thread that was recently posted about who gets our collections it was interesting especially from the owners of large collections. im starting with the currently retired tools as an homage to these tools and their service.
i love the idea of Chakos fathers Pulse and what it meant to him and as a result what it means to Chako. there can be no value placed on that tool im sure in his mind.
Bensasupertool is much the same if i remember correctly in a tool he owns. it was a tool that belonged to a 1st responder who passed away and he carries in much the same regard.
-
I was told a long time ago by a father of a school mate if I am going to collect I should collect what i love regardless of the value, be it today or in the future. he was a stamp collector himself and was getting his son into stamp collecting. I really never thought of "collecting" till I got my used charge TTi. I considered myself more a user and I was just acquiring these tools to use eventually. I began to wonder about the stories these tools had and what they have done and seen and meant to their original owners.
im not solely buying for their future value, honestly if i was solely interested in value or potential value id go after the al mars or Kershaw a100 type tools. sure they may or may not be of value into the future, they may loose value in terms of what i paid for them but my kids will know they meant something to me and that is important. hell my kids may have a fire sale once im gone and give these things away.
every tool seems to have been purchased with a purpose in mind other than monetary or projected value at least coming from the original owners point of view ( in most cases ). the tools were bought or gifted to serve and hopefully they did. it would be cool if all tools were passed on to someone like a kid or friend but in a thread that was recently posted about who gets our collections it was interesting especially from the owners of large collections. im starting with the currently retired tools as an homage to these tools and their service.
i love the idea of Chakos fathers Pulse and what it meant to him and as a result what it means to Chako. there can be no value placed on that tool im sure in his mind.
Bensasupertool is much the same if i remember correctly in a tool he owns. it was a tool that belonged to a 1st responder who passed away and he carries in much the same regard.
agree 100%. monetary value has no meaning to me, however cost can be a factor. the sad part is i want a mini, might have got one cheaper years ago. my post might have been different than my intent, cost, not value was the point. I bought a cybertool 41 in 2006 for $60. now it is over 80. To me the value is the same. but I am glad I got it then.
-
no i got what you were saying and believe me i consider getting one of every current model and hording them away. the blast, kick, and fuse are readily available and affordable NOW as well as the freestyle cx and most the squirts that are currently retired. some tools only retain value while others have skyrocketed so who's to know what tool will fetch a handsome fee looking forward. i don't plan on selling any but who knows things change.
its kinda cool looking at the 3 retired tools i have: MINI from 94, WAVE from 03, and ST from 01. none cost very much and im sure i paid less than what they were new. heck $25 for both the wave and mini, i got the ST for less than $30. im not sure where exactly im going with this honestly and i have changed my mind from my initial considerations. im still having fun and its all very affordable for me now so ill keep collecting.
now in 30 years my kids will have the decision of what to do with these hunks of metal. it would be great if they all fetch a bundle. for now they make me happy seeing their shiny bodies and like my youngest who likes to open and close them i enjoy that too.
-
Update on my Supertool I got today. :mail: :ahhh
its beautiful and in much better condition than I thought judging from the pictures. it looks to have been carried only or very gently used with the exception of the small driver which is a bit dinged. over all im super stoked and couldn't be happier YAY me.
I hope you enjoy the Supertool, it was my first ever Leatherman and I still have a big soft spot for it. :tu: How are you getting along with the "unfold another tool to unlock the first tool that you were actually using" system? ;)
-
I hope you enjoy the Supertool, it was my first ever Leatherman and I still have a big soft spot for it. :tu: How are you getting along with the "unfold another tool to unlock the first tool that you were actually using" system? ;)
it is quite a lovely tool. i really was surprised how compact it is and how great it feels in the hand. the locking system is fine tho i can see where the current lock systems are easier but this is a superb tool no less. i am smitten to have landed such a great example of this tool.
-
You are correct Aloha. I feel obligated to keep the Wave in service. Who knows the stories it holds or what service it was to someone in need. Next to the Rebar gifted to me for fathers day the wave has alot of sentimental value to me. As a volunteer FF, EMT im proud to carry the mans multi. Most of the time it resides at the fire hall in my locker ready to go. I wish to hope the deceased knows a small part of his life lives on as a device to aid in the help of others.
Enjoy that Super Tool. Sexy,sleek and slender huh. One of my faves. Glad you got a winner off the ebays :tu:
-
I bought a Style PS cuz my Style CS told me too... :whistle:
-
@Ben glad i got the story correct. stories like yours mean something to me in a big way.
-
I bought a Style PS cuz my Style CS told me too... :whistle:
:rofl: They are sneaky
-
The Juice XE6 arrived from Monrogue. Very fine tool. Its gonna be a great light EDCer. The tool load for its size is a marvel. Nice grippy teeth at the needle nose was a surprise. Its still stiff in the plier head as well. I guess it didnt make it into Monrogues strict rotation to many times. Thanks again for the sweet deal. Happy to add it to the collection.
-
The Juice XE6 arrived from Monrogue. Very fine tool. Its gonna be a great light EDCer. The tool load for its size is a marvel. Nice grippy teeth at the needle nose was a surprise. Its still stiff in the plier head as well. I guess it didnt make it into Monrogues strict rotation to many times. Thanks again for the sweet deal. Happy to add it to the collection.
Yeah, there's a lot packed into that thing :tu: And no, it didn't make the cut for my rotation ;) I really didn't use it much, other than the first couple weeks I had it before I got the next MT I liked the looks of. Hope you enjoy it man :D
-
just posted some pictures of 2 lovely new additions.
ST200 and Pulse :ahhh :ahhh :ahhh
been a multifabulousdayforme
-
just posted some pictures of 2 lovely new additions.
ST200 and Pulse :ahhh :ahhh :ahhh
been a multifabulousdayforme
Nice score. I would be happy with either.
-
Thank you. ROCKER LOCKS ROCK
-
I got two Pulse in the last two weeks. One "used" but in mint condition and a new one.
(http://img.photobucket.com/albums/v601/Veetec/b56f83de-43a9-41b6-908a-21bd643ef590_zpsb90de826.jpg)
A new PST and a second also new Sideclip should arrive by mail this week. :-)
-
Just keep rubbing it in.... :twak:
:D
I'll get one some day, just have to save my pennies. ;)
-
Just keep rubbing it in.... :twak:
:D
I'll get one some day, just have to save my pennies. ;)
Sorry about that, my friend. =D We surely will find you a nice one one day. :-)
-
Just keep rubbing it in.... :twak:
:D
I'll get one some day, just have to save my pennies. ;)
Sorry about that, my friend. =D We surely will find you a nice one one day. :-)
I'll probably gift myself one for Christmas. :D
-
wow those are lovely as well DRBAHN. im after a sideclip and have a BO PST non CC and a PST that im hoping is 80's model on the way. those are some great finds :tu:
-
Though it has taken a while, the Leatherman Skeletool SX has just arrived 5 minutes ago :mail:
And so far, I am NOT disappointed!! :multi:
-
Though it has taken a while, the Leatherman Skeletool SX has just arrived 5 minutes ago :mail:
And so far, I am NOT disappointed!! :multi:
Pictures!!!! :ahhh
-
just posted some pictures of 2 lovely new additions.
ST200 and Pulse :ahhh :ahhh :ahhh
been a multifabulousdayforme
Nice score Aloha :tu: I'm jealous :drool:
-
wow those are lovely as well DRBAHN. im after a sideclip and have a BO PST non CC and a PST that im hoping is 80's model on the way. those are some great finds :tu:
Geez, you're grabbing up the retired Leathermans huh? Enjoy those man :tu:
I got two Pulse in the last two weeks. One "used" but in mint condition and a new one.
(http://img.photobucket.com/albums/v601/Veetec/b56f83de-43a9-41b6-908a-21bd643ef590_zpsb90de826.jpg)
A new PST and a second also new Sideclip should arrive by mail this week. :-)
You also seem to be grabbing up those retired Leathermans. You and Aloha are making me jealous, and :drool: :gimme:
-
I'm very anxiously waiting for the MUT to arrive. I think my wife will be almost as happy as me as I'll quit bugging her to check the mail. :D
Sent from my HTC One using Tapatalk 4
-
You also seem to be grabbing up those retired Leathermans. You and Aloha are making me jealous, and :drool: :gimme:
These aren't the Leatherman's your looking for (in my best Obi-Wan impersonation), move along now.
:rofl: :rofl: :rofl: :rofl: :rofl:
I'm very anxiously waiting for the MUT to arrive. I think my wife will be almost as happy as me as I'll quit bugging her to check the mail. :D
Sent from my HTC One using Tapatalk 4
It won't disappoint you, trust me!¡!
-
I feel like a little kid waiting for Santa to come! Lol
Sent from my HTC One using Tapatalk 4
-
Though it has taken a while, the Leatherman Skeletool SX has just arrived 5 minutes ago :mail:
And so far, I am NOT disappointed!! :multi:
Pictures!!!! :ahhh
One thing is certain, the texture of the diamond file is finer than any of us(me included) gave it credit for. So unless you're running around in a lace, seethrough babydoll nightie. the SX won't dig throught your clothes.
-
Though it has taken a while, the Leatherman Skeletool SX has just arrived 5 minutes ago :mail:
And so far, I am NOT disappointed!! :multi:
Pictures!!!! :ahhh
One thing is certain, the texture of the diamond file is finer than any of us(me included) gave it credit for. So unless you're running around in a lace, seethrough babydoll nightie. the SX won't dig throught your clothes.
Thanks for that image.... :facepalm:
-
@monrogue thank you, im trying to get what I can while the getting is good. I was a bit impatient on the BO PST tho and could have waited but it looked to good to pass on. both the tools I got today are in awesome condition and seem to have either been carried only or very slightly used. I couldn't be happier with both. ROCKER LOCKS ROCK
-
wow those are lovely as well DRBAHN. im after a sideclip and have a BO PST non CC and a PST that im hoping is 80's model on the way. those are some great finds :tu:
Thank you very much, Aloha. :) I have never attached value to the Pulse/PST/PST II until a few weeks ago when I got the offer for this mint Pulse. I felt in love with it immediately and now I feel this strong and urgent need of buying more of the older LM. :o :D
I would love to own a BO PST or Mini-Tool or any other of the older models myself but unfortunately they seem to never have been sold here in Germany. :( So you have got a great score with your BO PST. :tu:
You are right btw, ROCKER LOCKS ROCK! :multi: Very cool mechanism and imo it is really fun to unlock a tool this way. :D
-
@monrogue thank you, im trying to get what I can while the getting is good. I was a bit impatient on the BO PST tho and could have waited but it looked to good to pass on. both the tools I got today are in awesome condition and seem to have either been carried only or very slightly used. I couldn't be happier with both. ROCKER LOCKS ROCK
I can be impatient like that too. Sometimes you just gotta grab 'em while you have the chance to do so. Glad the tools were in good condition. That's always a chance we take as well. So you really like those locks huh? That type of lock seems to have rather mixed reviews around here. I've never handled one myself (yet ;)), so I'm not sure how they work, but I'm curious to find out. Someday I will probably get me a Pulse, but that could be a long ways off. I want to get the original Wave first. I just have a hard time saving that amount of money as I spend it up quickly :twak:
-
@DrBahn I had been eyeing the Pulse and the prices are pretty off the charts for NIB. I too don't place a monetary value on them they are just so darn cool. The Pulse is a great little tool and I seriously love them ROCKER LOCKS, they are fun! I haven't received the PSTs so I cannot wait to get them in my hands. I too feel the need to acquire these older tools as well.
@monrogue the locks are pretty neat and mine tho stiff operated smoothly if that makes sense. the pulse is really a small tool tho the size of my original wave more or less. slim and sleek i guess with a great tools on board. the original wave is also slender as are the outside tools. i really am liking the older one a lot. the BO PST non Cap Crimper seemed like a good buy tho not great and i figured wtf. i worked so much in the past several months i treated myself to that one. i have no problem saving but i need to be a little more patient and wait for great deals. no regrets ii just love a great deal.
-
@monrogue the locks are pretty neat and mine tho stiff operated smoothly if that makes sense. the pulse is really a small tool tho the size of my original wave more or less. slim and sleek i guess with a great tools on board. the original wave is also slender as are the outside tools. i really am liking the older one a lot. the BO PST non Cap Crimper seemed like a good buy tho not great and i figured wtf. i worked so much in the past several months i treated myself to that one. i have no problem saving but i need to be a little more patient and wait for great deals. no regrets ii just love a great deal.
Yeah, I'll have to try them out for myself when I finally get a Pulse. I like the slim, sleek Leatherman classic style, so I would love the Pulse. I love my PST and PSTII, but just wish they locked, so the Pulse is a natural fit for that. Still, the PSTs are great for pocket carry, and they really are sufficient without locks as long as you're mindful of that fact. I have a problem with both of those >:D Once I get a little chunk saved up, I'm looking on here and Ebay to see what I can find for the amount I have saved. Sometimes there are some good deals, and sometimes you just have to jump at the chance to get something, even if it seems risky. Unfortunately for me, I prefer NIB for the Original Wave and Pulse, but I don't think that's going to work out for me considering how expensive they run. A used but in very good condition tool is acceptable, but it's hard to find them for an affordable price most times.
-
@DrBahn I had been eyeing the Pulse and the prices are pretty off the charts for NIB. I too don't place a monetary value on them they are just so darn cool. The Pulse is a great little tool and I seriously love them ROCKER LOCKS, they are fun! I haven't received the PSTs so I cannot wait to get them in my hands. I too feel the need to acquire these older tools as well.
How much do you pay for a NIB Pulse in the US? I paid for each of my two Pulse about $89 here in Germany. Not cheap but it could be worse I guess. And in Germany we generally pay (much) more for US products than we would do in the US itself.
I like the slim, sleek Leatherman classic style, so I would love the Pulse.
Same here and I am also sure that you would like the Pulse. ;)
-
@DrBahn I had been eyeing the Pulse and the prices are pretty off the charts for NIB. I too don't place a monetary value on them they are just so darn cool. The Pulse is a great little tool and I seriously love them ROCKER LOCKS, they are fun! I haven't received the PSTs so I cannot wait to get them in my hands. I too feel the need to acquire these older tools as well.
How much do you pay for a NIB Pulse in the US? I paid for each of my two Pulse about $89 here in Germany. Not cheap but it could be worse I guess. And in Germany we generally pay (much) more for US products than we would do in the US itself.
I like the slim, sleek Leatherman classic style, so I would love the Pulse.
Same here and I am also sure that you would like the Pulse. ;)
I'm sure I would ;) Are you saying you paid $89 for both Pulses together? :o That's a good price based on what I see here on Ebay. I see NIB Pulses around that price or higher, mostly over $100 unfortunately. That would take me a long time to save for, unless it was an unexpected gift or something happened to cause me to have extra money to put in my savings.
-
I'm sure I would ;) Are you saying you paid $89 for both Pulses together? :o That's a good price based on what I see here on Ebay. I see NIB Pulses around that price or higher, mostly over $100 unfortunately. That would take me a long time to save for, unless it was an unexpected gift or something happened to cause me to have extra money to put in my savings.
No, I paid $89 for each of them or about $180 for both together. ;) If they are sold for about $100 in the US, then I guess I can be very happy with the prices I paid here in Germany. 8)
-
My last Let. are a Rebar and a Crunch.. Now I'm thinking about a Supertool300.. :tu:
-
I miss the Pulse and its rocker locks (superb locking mechanism if you ask me). If they were still readily available then one would definitely make it to my EDC :tu:
-
I'm sure I would ;) Are you saying you paid $89 for both Pulses together? :o That's a good price based on what I see here on Ebay. I see NIB Pulses around that price or higher, mostly over $100 unfortunately. That would take me a long time to save for, unless it was an unexpected gift or something happened to cause me to have extra money to put in my savings.
No, I paid $89 for each of them or about $180 for both together. ;) If they are sold for about $100 in the US, then I guess I can be very happy with the prices I paid here in Germany. 8)
Oh ok. I was considering having you send me one if a NIB was around $50 ;) So you paid around the same as some new ones go for here, and cheaper than several I've seen, so you should be happy with the prices you got as far as I can tell anyway. I hope by the time I can get one there is a good deal that coincides with my timing ;)
-
So you paid around the same as some new ones go for here, and cheaper than several I've seen, so you should be happy with the prices you got as far as I can tell anyway.
I bought one NIB in a store and I got the other one from a collector who never used it. A few minutes ago I found out that the usual retail price for a NIB Pulse was about $120 here in Germany. :o
-
My last Let. are a Rebar and a Crunch.. Now I'm thinking about a Supertool300.. :tu:
Hi!Welcome to the mad house :2tu:
I'm guessing those arn't your first LMs
-
@DrBahn i feel you got very good prices on those NIB Pulse. some are asking $100-$150 US for NIB.
here is one i recently found on fleabay
http://www.ebay.com/itm/LEATHERMAN-PULSE-BALLISTIC-NYLON-SHEATH-MADE-in-USA-NIB-LQQK-/251323903692?pt=LH_DefaultDomain_0&hash=item3a84126ecc
( usual disclaimer; I have nothing to do with the seller or have never done any business with them I never bought anything from them )
used ones seem to be mostly put up for auction. ive seen several NIB but $100-$150 US is a bit steep for me.
-
These two beauties arrived today:
(http://img.photobucket.com/albums/v601/Veetec/LMPSTuSK_zps6c86e4a0.jpg) (http://smg.photobucket.com/user/Veetec/media/LMPSTuSK_zps6c86e4a0.jpg.html)
-
Very nice! :tu:
-
:2tu:
Very cool. So which one will be your new EDC. :P
-
Very nice! :tu:
:2tu:
Very cool. So which one will be your new EDC. :P
Thank you! :) I think I will EDC the Pulse furthermore and maybe change every few days to the PST for a day or two. I already love the simplicity of the PST. ;)
-
These two beauties arrived today:
(http://img.photobucket.com/albums/v601/Veetec/LMPSTuSK_zps6c86e4a0.jpg) (http://smg.photobucket.com/user/Veetec/media/LMPSTuSK_zps6c86e4a0.jpg.html)
You seem to be on a "vintage" quest Doc. Nothing wrong with that, of course.
-
These two beauties arrived today:
(http://img.photobucket.com/albums/v601/Veetec/LMPSTuSK_zps6c86e4a0.jpg) (http://smg.photobucket.com/user/Veetec/media/LMPSTuSK_zps6c86e4a0.jpg.html)
You seem to be on a "vintage" quest Doc. Nothing wrong with that, of course.
Back to the roots, I guess. My knife addiction started at the age of five with a Victorinox Champion and a PST knock off offered by Camel... :)
-
@DrBahn another 2 great tools :salute. i have yet to get a sideclip but that tool really intrigues me. some great stuff being offered in Germany and im glad you got them and they will see some carry time. i also agree on the simplicity of the earlier LM tools they are very pleasing to the eye and hand.
-
Very nice! :tu:
:2tu:
Very cool. So which one will be your new EDC. :P
Thank you! :) I think I will EDC the Pulse furthermore and maybe change every few days to the PST for a day or two. I already love the simplicity of the PST. ;)
Sweet tools you got there Dr :tu: I too love the simplicity of the classic Leathermans.
-
ok here is a BO PST non CC edition tho im a bit stumped on the year. im going to post in the PST Chronology thread as well see if I can get some possible dates.
This one is very stiff and seems unused at all. I have to say I may have really opened Pandora's box with this one. WOW I think I just went PST crazy. this is a very cool tool and im really digging these early models a lot.
-
That's a cool PST Aloha :tu: And I agree, the PSTs are addicting. I don't have any BO tools at all, but I'm curious about them and would like to own at least one. Not sure what I'd get though, but probably a PST or maybe even a SuperTool :think:
-
Very nice BO PST Aloha :tu:
I own a PST and love it but I can't think that to be my favorite of all the LM products that I own. There are so many more that are better let alone more comfortable to use.
-
ok here is a BO PST non CC edition tho im a bit stumped on the year. im going to post in the PST Chronology thread as well see if I can get some possible dates.
This one is very stiff and seems unused at all. I have to say I may have really opened Pandora's box with this one. WOW I think I just went PST crazy. this is a very cool tool and im really digging these early models a lot.
Nice score! This BO PST is a real beauty, Aloha. :salute:
I have got my eyes on another PST and on two PST II. I only need Fortuna by my side. ;-)
-
thanks fellas. this PST sure was stiff as heck to open and the BO was in great condition throughout which leads me to believe it wasn't used. the blades edge looks completely factory and non of the drivers have any hint of wear.
@stealth the wave still gets top billing for work duties this tool is looks stealthy dressed in black and being slim feels great in hand.
@DrBahn one more tool coming in for me as well and it's another PST tho not BO. I am making a trip sunday to a huge flea market so im very excited and hopeful Ill score something. you have located some great NIB tools yourself and your collection is looking quite lovely with all the older models.
-
@DrBahn one more tool coming in for me as well and it's another PST tho not BO. I am making a trip sunday to a huge flea market so im very excited and hopeful Ill score something. you have located some great NIB tools yourself and your collection is looking quite lovely with all the older models.
Thank you very much, Aloha. I will take a new picture of my collection next week. :) I wish you good luck for the flea market and am looking forward to see your new scores. :multi:
-
I finally got one of these. fist great in my M7 Toollet as well.
(http://i833.photobucket.com/albums/zz255/detronphillips/20130823_175005.jpg)
-
Brewzer for me. :)
(http://farm4.staticflickr.com/3682/9581359212_a956033302.jpg) (http://www.flickr.com/photos/drjohnzoidberg/9581359212/)
-
PST came in today and it looks unused. Date codes 10/96 & 1/97. I really dig the PSTs a lot but the BO I got in earlier was really killer.
-
Nice PST Aloha :tu:
-
Nice PST Aloha :tu:
I totally agree! 8) Really looks unused and like new. Have to find myself a second one, too. :multi:
-
thanks, I was surprised at the condition too. now I have to try and find a earlier one with Pocket Survival Tool on it of the large Leatherman font.
-
I got two oht's in the mail today
(http://i1211.photobucket.com/albums/cc421/JAfromMn/temporary_zps1404179e.jpg)
The black one I picked up in a great trade with metro the kaki one came from winning the 5000 member contest:-
I love them both:)
-
Nice score JA!! Glad they made it to you quickly! :tu:
-
Nice score JA!! Glad they made it to you quickly! :tu:
Thanks derekmac
Me Too
I put the black one on my belt as soon as I opened it.
-
those look cool, Id have a hard time deciding which one to carry. I sure hope it makes things easier with your bum finger.
-
those look cool, Id have a hard time deciding which one to carry. I sure hope it makes things easier with your bum finger.
I figured I would keep the one I won nice and beat on the other I traded for.
it wasn't a easy decision Lol
edit
yes its been very useful already. It sure helps
-
Cool JA, glad you got 'em, and glad they're already proving useful to you :tu:
-
Congrats again JA! Those look awesome. Keep those pics coming.
Sent from my MB886 using Tapatalk 4
-
Just got a Rail from the store in Portland :D I'm gonna put up pics tomorrow
Sent from my HTC6990LVW using Tapatalk
EDIT: Raptor≠Rail
-
Amici,
Picked up another PS4 but in Red to go along with my red tool..
Cheers,
Serge
-
Congrats again JA! Those look awesome. Keep those pics coming.
Sent from my MB886 using Tapatalk 4
Thanks 82brutus
I'm going to start a new topic about it
:)
-
I got two oht's in the mail today
(http://i1211.photobucket.com/albums/cc421/JAfromMn/temporary_zps1404179e.jpg)
The black one I picked up in a great trade with metro the kaki one came from winning the 5000 member contest:-
I love them both:)
Nice set there Joel. :D
-
These two beauties arrived today:
(http://img.photobucket.com/albums/v601/Veetec/LMPSTuSK_zps6c86e4a0.jpg) (http://smg.photobucket.com/user/Veetec/media/LMPSTuSK_zps6c86e4a0.jpg.html)
Great score there Dr. Bahn. 8) :tu: :)
I got two oht's in the mail today
(http://i1211.photobucket.com/albums/cc421/JAfromMn/temporary_zps1404179e.jpg)
The black one I picked up in a great trade with metro the kaki one came from winning the 5000 member contest:-
I love them both:)
The OHT is a 8) tool JA. Glad you lik'um. At first I wasn't overly crazy about the sprung plier head but have got use to it. It wanted to jump out of my hand when it sprung into action. :o :ahhh :D :D
-
Great score there Dr. Bahn. 8) :tu: :)
Thank you very much. :)
Today I got a nearly mint PST II in the mail. :multi:
(http://img.photobucket.com/albums/v601/Veetec/PST2_zpse826e632.jpg) (http://smg.photobucket.com/user/Veetec/media/PST2_zpse826e632.jpg.html)
-
looks like another beauty DrBahn, that's next on my list as well.
-
looks like another beauty DrBahn, that's next on my list as well.
Thank you, Aloha. :salute: I am not the biggest fan of partially serrated blades but I still like it very much. I was surprised that the scissors are different compared to the Pulse but they seem to do their job well, too. :) Another surpise was the missing groove on the diamond file. But since I don´t go fishing anyway it doesn´t matter much to me. ;)
-
Style CS :D
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/LMStyleCS.png)
-
ive said it before and im not afraid to say it again.......... ROCKER LOCKS ROCK :ahhh
03/02 04/02 date codes so its an earlier model than the one I got before. I love the looks of this tool.
as you can see I also got a Paratool as well ( finally ). this and my Skeletool will be rotated as my day off carry. I really like this tool a lot, I had fun just opening and closing it. just need to tighten the plier a bit is all as all implements were in great shape and sharp.
-
Juice C2
Squirt P4
-
ive said it before and im not afraid to say it again.......... ROCKER LOCKS ROCK :ahhh
03/02 04/02 date codes so its an earlier model than the one I got before. I love the looks of this tool.
as you can see I also got a Paratool as well ( finally ). this and my Skeletool will be rotated as my day off carry. I really like this tool a lot, I had fun just opening and closing it. just need to tighten the plier a bit is all as all implements were in great shape and sharp.
Nice ST 200! :tu: This is the next on my list. :D Had to buy another nearly new PST II from fleabay USA first today. ::) 8)
-
I was eyeing a really nice sideclip myself but I just couldn't pull the trigger at $78 plus shipping. I have a fondness for the rocker locks and wanted another pulse but nothing grabbed my attention. still after a PST2 but I am also sidetracked by the Gerber aka Mr Pinchy's. I am really liking these hand pinching MTs
-
I have finally joined the LM team with the arrival of the my LM Rebar and LM Micra, the scissors on the Micra are awesome and the Rebar is a great tool, been using it a lot the past week. I also have the LM Removable Bit Drive kit.
-
Just added a LM Core to the collection...
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/LeathermanCore01_zps07d061f6.jpg)
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/LeathermanCore02_zps1e195559.jpg)
Cheers,
CB
-
@DrBahn those PSTs sure are addicting, I find myself on the search for them more and more.
@PPCAPache and Chinese buffet great scores. the core looks wonderful and as usual one on my list as well.
-
@ Aloha007: Thanks! Here are a few more pics for size comparison...
Core & Rebar
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/LeathermanCore04_zps74119a3c.jpg)
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/LeathermanCore06_zpsf1c0be8b.jpg)
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/LeathermanCore05_zpsfac3d6a2.jpg)
Core, Rebar, PST, Micra
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/LeathermanCore07_zps21f89b41.jpg)
Big brother & little brother.
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/LeathermanCore08_zps5fa75e98.jpg)
CB
-
WOW those are some great pictures. the core is a beefy tool huh? the blade looks like a sword compared to the rebars, the plier head is massive as well. you sure did get a very nice example, again congrats on such a fine LM.
-
I never realized how big the Core is :think: Nice new addition CB :tu:
-
@DrBahn those PSTs sure are addicting, I find myself on the search for them more and more.
@PPCAPache and Chinese buffet great scores. the core looks wonderful and as usual one on my list as well.
True about the PSTs being addicting as I do the same thing occasionally. I have one on the way as a matter of fact >:D
-
yeah I saw that :tu:
I cant stop looking at them myself. I want an early model one like hopefully you have coming. I think I have a mid to late 80's SS PST based off the Chronology thread. The BO one I have im a bit stumped as to the date. they seem so hard to date as I read through all the pages several times :ahhh and still am confused.
I want one with the 423 pat # and a PST with no PST markings, ive seen a few and they are intriguing. I hope you got a good one tho they are all pretty bad arse to me.
-
yeah I saw that :tu:
I cant stop looking at them myself. I want an early model one like hopefully you have coming. I think I have a mid to late 80's SS PST based off the Chronology thread. The BO one I have im a bit stumped as to the date. they seem so hard to date as I read through all the pages several times :ahhh and still am confused.
I want one with the 423 pat # and a PST with no PST markings, ive seen a few and they are intriguing. I hope you got a good one tho they are all pretty bad arse to me.
I need to stop looking as I get tempted too easily >:D The one I have coming has the REG’D TM 1325473, which is listed as when they switched to the saber blade, and the other criteria seem to fit it as well, so I'm in hopes that's what I actually get.
-
oops I meant to say I want a PST2 not marked PST2 but still having the PST2 implements. I sure do hope you get exactly what you hoped for.
-
oops I meant to say I want a PST2 not marked PST2 but still having the PST2 implements. I sure do hope you get exactly what you hoped for.
I've got one of those PSTIIs NIB and dated 0997. Nice tool as well. I really like opening and closing it as it's very smooth feeling. I think the older Leathermans were built a little better in some ways.
-
@ Aloha007: Thanks! Here are a few more pics for size comparison...
This got me thinking... Since we know we have some guys here who have probably every single model of LM ever made, it would be really interesting to see them all side by side (if that's even possible in one pic) for size comparison :think:
-
oops I meant to say I want a PST2 not marked PST2 but still having the PST2 implements. I sure do hope you get exactly what you hoped for.
The PST 2 I bought from fleabay USA a few days ago is only marked "Leatherman Tool" and not "PST2" like my first one. If I remember right there are still offered some other like this if you are interested. :-)
-
Got my Leatherman Surge today and I'm really impressed with it. the sissors alone are worth it. cant wait to give it a thrashing over the next few days.
EDC: Leatherman Charge TTI
Tool Box: Leatherman Surge
http://www.youtube.com/user/gearsNtools
-
Rebar :salute:
-
The SideClip came real early. The joys of buying local. Excellent used condition IMO. The listing said fair condition with signs of use. the only tool that looked used is the medium flat driver and a few small scratches and wear marks from carry use on the scales. The seller had to be mad or a granny selling of crap in the attic. 24 bucks should be the going rate for all old leathermans. Next to the 12 dollar ST its the best buy ive managed to snag. Its buys like that that makes the collecting fun to do.
The brushed finish is pretty sweet and a refreshing change from the polished and BO finish I like so much. The only drawback to the SideClip is the tool load. A bit blah with the 3 flat drivers,but I knew that going into buying it. A file or scissor would have been nice. Oh well. Its gonna be a close mate from here on out. Date stamps 0198,0198,0198 and 0298. :D
-
Nice one Ben :tu:
-
Nice one Ben :tu:
+1 :tu:
-
New to Leatherman tools, currently got the LM ReBar and LM Micra for Father's day, so far love the ReBar it has everything I need, however have been bitten so eyeing up my next one, Birthday is in Dec so hinting to the wife to get me the Charge TTi (was also looking at the Wave).
Don't think I've posted this here yet...
(http://img834.imageshack.us/img834/3206/6cpi.jpg)
-
That's a great combo there PPCAPache :tu:
-
The SideClip came real early. The joys of buying local. Excellent used condition IMO. The listing said fair condition with signs of use. the only tool that looked used is the medium flat driver and a few small scratches and wear marks from carry use on the scales. The seller had to be mad or a granny selling of crap in the attic. 24 bucks should be the going rate for all old leathermans. Next to the 12 dollar ST its the best buy ive managed to snag. Its buys like that that makes the collecting fun to do.
The brushed finish is pretty sweet and a refreshing change from the polished and BO finish I like so much. The only drawback to the SideClip is the tool load. A bit blah with the 3 flat drivers,but I knew that going into buying it. A file or scissor would have been nice. Oh well. Its gonna be a close mate from here on out. Date stamps 0198,0198,0198 and 0298. :D
Get a beater PST2,do a transplant :pok:
-
Leatherman SS Wave!!!
-
Picked up this PTS (0498) at the weekend :multi:
-
I check a local Pawn shop every week or so. Usually they have a pile of junk knives and MT's. Several weeks ago I got a nice Gerber Diesel there for $15. Today I got the best deal I ever got on a Leatherman. Next to the $10 piece of crap knock offs, was a leather Leatherman sheath. In it was a very dirty and slightly rust stained Super Tool------marked $2.99. Both the Super Tool & sheath cleaned up easily, the blades still have the factory edge. I think I'll keep this one in my briefcase.
-
Got a Style CS last week and have a Rebar and C33lx in the mail.
-
Yay, the PST came today :mail: All looks well, it's in great condition, with just some scratches on the outside from carry I assume. All the tools look great and barely used, and the blade may very well be a saber point blade :D Anyone correct me if that's incorrect though.
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20130910_230156_402_zpsa23d558f.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20130910_230156_402_zpsa23d558f.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20130910_225943_019_zps955bd75d.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20130910_225943_019_zps955bd75d.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20130910_225549_876_zpsa75b2a3d.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20130910_225549_876_zpsa75b2a3d.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20130910_225817_592_zpsa5c777ce.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20130910_225817_592_zpsa5c777ce.jpg.html)
-
I check a local Pawn shop every week or so. Usually they have a pile of junk knives and MT's. Several weeks ago I got a nice Gerber Diesel there for $15. Today I got the best deal I ever got on a Leatherman. Next to the $10 piece of crap knock offs, was a leather Leatherman sheath. In it was a very dirty and slightly rust stained Super Tool------marked $2.99. Both the Super Tool & sheath cleaned up easily, the blades still have the factory edge. I think I'll keep this one in my briefcase.
Bargain :ahhh :ahhh
:D
-
Think I've mentioned it else where,but BO PST,date coded 02-04/02.
Took a hot water treatment to get the pliers to behave,but very,very pleased!
(http://i782.photobucket.com/albums/yy104/kirk130013/image_zps6d987373.jpg) (http://s782.photobucket.com/user/kirk130013/media/image_zps6d987373.jpg.html)
-
That looks great Kirk :tu:
I received a Skeletool CX from a very nice man at the UK meet :salute: :D
:cheers:
-
Think I've mentioned it else where,but BO PST,date coded 02-04/02.
Took a hot water treatment to get the pliers to behave,but very,very pleased!
(http://i782.photobucket.com/albums/yy104/kirk130013/image_zps6d987373.jpg) (http://s782.photobucket.com/user/kirk130013/media/image_zps6d987373.jpg.html)
Yay, the PST came today :mail: All looks well, it's in great condition, with just some scratches on the outside from carry I assume. All the tools look great and barely used, and the blade may very well be a saber point blade :D Anyone correct me if that's incorrect though.
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20130910_225817_592_zpsa5c777ce.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20130910_225817_592_zpsa5c777ce.jpg.html)
Very nice PSTs both of you got there! :salute:
-
Cheers Doc :tu:
Tony,photos,or it didnt happen :pok:
-
I have a very nice Leatherman Rebar (at last!!! :D)
guess who's fault it is ? :rofl:
-
Cheers Doc :tu:
Tony,photos,or it didnt happen :pok:
But my computer is ssooooooo slow ::)
Good evening TD :cheers:
-
Think I've mentioned it else where,but BO PST,date coded 02-04/02.
Took a hot water treatment to get the pliers to behave,but very,very pleased!
(http://i782.photobucket.com/albums/yy104/kirk130013/image_zps6d987373.jpg) (http://s782.photobucket.com/user/kirk130013/media/image_zps6d987373.jpg.html)
Nice BO tool. :hatsoff:
-
:multi:
-
:multi:
:drool: pretty!
-
:multi:
:drool: pretty!
And very Sharp :ahhh
-
You Havnt been cutting bread again,have you? :pok:
-
You Havnt been cutting bread again,have you? :pok:
:shrug: :angel:
:whistle:
-
My latest of the brand
(http://i603.photobucket.com/albums/tt115/NBknife/4b1ee1168b504cbbc94d551d0f11de08_zpsbdb1dcc3.jpg) (http://s603.photobucket.com/user/NBknife/media/4b1ee1168b504cbbc94d551d0f11de08_zpsbdb1dcc3.jpg.html)
-
My latest of the brand
(http://i603.photobucket.com/albums/tt115/NBknife/4b1ee1168b504cbbc94d551d0f11de08_zpsbdb1dcc3.jpg) (http://s603.photobucket.com/user/NBknife/media/4b1ee1168b504cbbc94d551d0f11de08_zpsbdb1dcc3.jpg.html)
I got those in the mail today too!!!
-
BO? Original Super Tool. I am questioning the finish as this one is very shiny and slick as opposed to the matte and "powdery" "chalky" look of BO that im used to. Was there another finish applied to the model? date codes on both handles 05/97 this tool looks unused and is in very nice condition with 2 nicks on the finish, actually "chips" which also leads me to believe the finish is something else. can black oxide wear to a smooth silky finish? this would also be odd as this tool seems unused though it could have been carried. sorry about the lights I wanted to show the finish better.
-
That's just down right sexy Aloha!¡!
-
Today my NIB Flair and slightly used BO PST with cap crimper came in. :drool:
Unfortunately the Phillips screwdriver of the PST has been rounded and can´t really be used anymore. :-[ All other tools are unused or in well conditions. I already wrote LM Germany an email and asked them for a replacement, but since the BO PST hasn´t been offered here in Germany they most likely cannot help me. :cry:
The Flair is NIB and therefore in perfect conditions.
Here a some fast pics:
(http://img.photobucket.com/albums/v601/Veetec/Foto_zpscdf6d3be.jpg) (http://smg.photobucket.com/user/Veetec/media/Foto_zpscdf6d3be.jpg.html)
(http://img.photobucket.com/albums/v601/Veetec/LMBO_zps61ba043d.jpg) (http://smg.photobucket.com/user/Veetec/media/LMBO_zps61ba043d.jpg.html)
-
Another good score there Dr. Bahn :tu: Too bad about the PST's phillips driver. Is there any way to touch it up or something to make it usable?
-
Another good score there Dr. Bahn :tu: Too bad about the PST's phillips driver. Is there any way to touch it up or something to make it usable?
Thank you, Monrogue. :)
I don´t think that you can touch up the Phillips driver somehow. Its four small "blades" are a bit twisted, too. If LM Germany can´t replace it with a BO one, then I will most probably replace it with a silver one. It will be an user anyway since it is not new and the soldier who owned it previously carved some letters and nummers into the coating on the handles on both sides (but you can barely see it). Does anybody know what "A-6979" could mean?
A silver Phillips driver is better than no Phillips driver at all and having an useless tool on it. What do you think?
-
Another good score there Dr. Bahn :tu: Too bad about the PST's phillips driver. Is there any way to touch it up or something to make it usable?
Thank you, Monrogue. :)
I don´t think that you can touch up the Phillips driver somehow. Its four small "blades" are a bit twisted, too. If LM Germany can´t replace it with a BO one, then I will most probably replace it with a silver one. It will be an user anyway since it is not new and the soldier who owned it previously carved some letters and nummers into the coating on the handles on both sides (but you can barely see it). Does anybody know what "A-6979" could mean?
A silver Phillips driver is better than no Phillips driver at all and having an useless tool on it. What do you think?
Well at least you are able to replace it. I would say a regular silver one would definitely be better than a useless one, so go for it :tu:
-
Another good score there Dr. Bahn :tu: Too bad about the PST's phillips driver. Is there any way to touch it up or something to make it usable?
Thank you, Monrogue. :)
I don´t think that you can touch up the Phillips driver somehow. Its four small "blades" are a bit twisted, too. If LM Germany can´t replace it with a BO one, then I will most probably replace it with a silver one. It will be an user anyway since it is not new and the soldier who owned it previously carved some letters and nummers into the coating on the handles on both sides (but you can barely see it). Does anybody know what "A-6979" could mean?
A silver Phillips driver is better than no Phillips driver at all and having an useless tool on it. What do you think?
Well at least you are able to replace it. I would say a regular silver one would definitely be better than a useless one, so go for it :tu:
I HOPE that I will be able to replace it somehow. LM did not answer yet... :-\
-
That is a deal breaker to me (the twisted Philips). I would send it back to the seller :rant:
-
That is a deal breaker to me (the twisted Philips). I would send it back to the seller :rant:
I bought it from fleabay and cannot return it. Other than the Phillips driver the tool is in very good condition and since it was never officially available in Germany, I won´t most likely find one for this great price here again. I can just hope that LM can help me out with a replacement Phillips driver in what color ever.
-
LM Germany wrote me an email a few minutes ago. I can send the PST in and they will replace the Phillips driver. What a great service! :tu:
-
This is great news! :D
-
Good to hear Doc :tu:
-
LM Germany wrote me an email a few minutes ago. I can send the PST in and they will replace the Phillips driver. What a great service! :tu:
Sweet deal :D
-
Nice score there Doc :tu: Great news about that phillips driver as well. LM customer service is top notch IMO. I'm waiting on my daughter's Flair that I sent back on Friday for corkscrew fixes.
-
Nice score there Doc :tu: Great news about that phillips driver as well. LM customer service is top notch IMO. I'm waiting on my daughter's Flair that I sent back on Friday for corkscrew fixes.
LM customer service is top notch for sure! :tu:
Thanks @ all for holding my hand during those hard hours yesterday. :tu: ::) ;) :D
-
Nice score there Doc :tu: Great news about that phillips driver as well. LM customer service is top notch IMO. I'm waiting on my daughter's Flair that I sent back on Friday for corkscrew fixes.
LM customer service is top notch for sure! :tu:
Thanks @ all for holding my hand during those hard hours yesterday. :tu: ::) ;) :D
No problem :salute: ;)
-
Mailman just brought me a bit extender and a LED Lenser M5.
-
Today the mailman brought my second used PST II:
(http://img.photobucket.com/albums/v601/Veetec/LMPSTII_zps75b05ed3.jpg) (http://smg.photobucket.com/user/Veetec/media/LMPSTII_zps75b05ed3.jpg.html)
Cleaning, sharpening, oiling. Check! Since it has some more scratches than my first PST II, the newcomer will replace the older as EDC tool. :)
-
Nice PST II there Dr. Bahn! I have yet to acquire an unmarked PST II. Someday I'll track one down.
This is what showed up in my mailbox today...
-
Thank you, bd! But you have got a nice score, too. The Sideclip is a great tool IMO. :tu:
-
Today my second ss PST arrived. The tool itself is like new and in perfect condition but the previous owner seemed to be a heavy smoker. The nylon pouch smells terrible and I haven´t found a method to get rid of this stink yet. ::)
-
nice score with the sideclip and pst's.
@DrBahn
50/50 vinegar/water lightly wiped onto surface then let air dry and place several dryer sheets into sheath to eliminate the vinegar smell.
baking soda scubbed onto surface and rinsed well then air dry.
activated charcoal place inside a cloth or something porous then place inside sheath should absorb smell.
-
Sweety Mini-Tool :angel:
(http://img5.imageshack.us/img5/4963/k2gi.jpg)
(http://img404.imageshack.us/img404/4/zcwm.jpg)
(http://img534.imageshack.us/img534/6135/ap58.jpg)
(http://img5.imageshack.us/img5/8543/2pnq.jpg)
-
nice score with the sideclip and pst's.
@DrBahn
50/50 vinegar/water lightly wiped onto surface then let air dry and place several dryer sheets into sheath to eliminate the vinegar smell.
baking soda scubbed onto surface and rinsed well then air dry.
activated charcoal place inside a cloth or something porous then place inside sheath should absorb smell.
Thank you for the hints, Aloha. I will try them within the next days. :tu: :cheers:
-
Sweety Mini-Tool :angel:
(http://img5.imageshack.us/img5/4963/k2gi.jpg)
Nice Mini Tool, maba. How do you like it so far? :)
-
Nice MINI maba 8).
@DrBahn hope something works out. ive even used apple cider vinegar with some success. good luck on getting the smoke smell out.
-
Sweety Mini-Tool :angel:
Nice :drool:
-
Just bought a Wave on eBay. I bought it cuz it was brand new and a great deal. I like it. It's the same size as my Charge. I can't help thinking when I look at it and hold it that it's a Surge that just hasn't grown up yet. :whistle:
-
:multi:
-
Nice tools! :tu:
-
Big and little brother. :D
-
Just bought a Wave on eBay. I bought it cuz it was brand new and a great deal. I like it. It's the same size as my Charge. I can't help thinking when I look at it and hold it that it's a Surge that just hasn't grown up yet. :whistle:
I looked at both these tool when deciding what to get and ended up with a wave. they are definitely as you describe.
-
Original Supertool arrived today along with a bit adapter and sheath.
-
CAM, PUMP and RAIL >:D
(http://img22.imageshack.us/img22/3873/g82z.jpg) (http://imageshack.us/photo/my-images/22/g82z.jpg/)
-
A lightly used Blast
-
CAM, PUMP and RAIL >:D
(http://img22.imageshack.us/img22/3873/g82z.jpg) (http://imageshack.us/photo/my-images/22/g82z.jpg/)
Planning on using them, or just for the collection?
-
Planning on using them, or just for the collection?
Unfortunately, only a collection. In my country there are serious limitations in terms of possession and use of weapons.
-
I had a moment of weakness and made a PST II impulse buy off of the bay one morning :) it's in great shape.
(http://i1088.photobucket.com/albums/i330/Jetbo111/EDC%20Tools/IMG_0460_zps14094615.jpg)
-
Planning on using them, or just for the collection?
Unfortunately, only a collection. In my country there are serious limitations in terms of possession and use of weapons.
:tu:
-
Just got myself a Leatherman Raptor. :woohoo:
-
I had a moment of weakness and made a PST II impulse buy off of the bay one morning :) it's in great shape.
(http://i1088.photobucket.com/albums/i330/Jetbo111/EDC%20Tools/IMG_0460_zps14094615.jpg)
At least it was a moment of weakness you don´t have to feel bad about. ;) The PST II is a great tool. Congrats! :tu:
-
My MUT that I won from the July donation prize arrived today. :D
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/null_zpsff10db35.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/null_zpsff10db35.jpg.html)
-
My MUT that I won from the July donation prize arrived today. :D
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/null_zpsff10db35.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/null_zpsff10db35.jpg.html)
Very 8) Derek!¡! How do you like it so far?
-
My MUT that I won from the July donation prize arrived today. :D
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/null_zpsff10db35.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/null_zpsff10db35.jpg.html)
Very 8) Derek!¡! How do you like it so far?
This thing is awesome! To me this is how an MT should feel. I would have no concerns using this tool hard as it is incredibly solid feeling.
I would really like to see Leatherman make a civilian version of this. I think they'd do very well selling them. I really can't see me having any use for the carbon scraper or the bolt release tool, so I'm trying to find ideas on modding it. :D
I'm going to be carrying my modded Soldier in the sheath so I'll have scissors, can/bottle opener and awl, so I should have my bases covered with that pairing.
One thing I love having is the long bits. How many times have we gone to use our MT's to tighten something, but the bits were too short. I know you could carry a bit kit, but with this having the storage for the two long bits it's one less thing you have to worry about.
Sent from my iPhone 5 using Tapatalk
-
This thing is awesome! To me this is how an MT should feel. I would have no concerns using this tool hard as it is incredibly solid feeling.
I would really like to see Leatherman make a civilian version of this. I think they'd do very well selling them. I really can't see me having any use for the carbon scraper or the bolt release tool, so I'm trying to find ideas on modding it. :D
I'm going to be carrying my modded Soldier in the sheath so I'll have scissors, can/bottle opener and awl, so I should have my bases covered with that pairing.
One thing I love having is the long bits. How many times have we gone to use our MT's to tighten something, but the bits were too short. I know you could carry a bit kit, but with this having the storage for the two long bits it's one less thing you have to worry about.
Sent from my iPhone 5 using Tapatalk
I love the longer bits :tu: I am wanting to mod mine to replace the saw with a file. I had thoughts about the Surge exchanger but that has been shot down.
-
I've been carrying my LM OHT for the past week. I have to say I'm really impressed with the pliers, they deploy with a nice thwack and are a joy to use. The main knife blade is great, probably the only drawback I get is that it's a big lump of a thing considering the smallish tool load.
I'm going to stick with it, but I think one of my waves will make it way back to edc after a while.
-
Juice S2. It's been in my pocket since it got here.
-
Juice S2. It's been in my pocket since it got here.
Cool love the S2. What color
-
Juice S2. It's been in my pocket since it got here.
Glad your getting along with it. :tu:
I'm just happy it's finally there. I thought for sure it was lost.
-
My latest LM is the Crunch, dated 1012. It's been my EDC for a couple of weeks now, along with my Wenger EvoWood. The two compliment each other very well. The locking pliers have helped out on several tough jobs, and I've been impressing my co workers, most of whom are tool users themselves, with one-handed openings.
I'm keeping my eyes open for a nice portable bit set to go with the Crunch, as that but driver is just screaming to be used!
-
Juice S2. It's been in my pocket since it got here.
Glad your getting along with it. :tu:
I'm just happy it's finally there. I thought for sure it was lost.
It's awesome! I love this model, it's the best one!
I was afraid it was lost too, and I really wanted this model!
-
I've been without my collection for 8 weeks now as we have just moved country, and I am impressed how my Skeletool has coped with the important tasks: ripping cartons, gripping flat pack connectors, pulling wires, holding nuts and most importantly opening stubbies. It is a vital thing to pack in your personal luggage when you are moving house, as you will not have the most basic of tools otherwise, and it hurts to buy a duplicate spanner or screwdriver when you have some Hazet or Wera on a ship somewhere. LM fills its role admirably as the-tool-you-have-available-when-you-really-need-one.
-
This is my latest Leatherman:
(http://i1124.photobucket.com/albums/l562/lacket/bilde.jpg) (http://s1124.photobucket.com/user/lacket/media/bilde.jpg.html)
And this guy sign it for me:
(http://i1124.photobucket.com/albums/l562/lacket/IMG_7761.jpeg) (http://s1124.photobucket.com/user/lacket/media/IMG_7761.jpeg.html)
He was on a visit in Norway
-
This is my latest Leatherman:
(http://i1124.photobucket.com/albums/l562/lacket/bilde.jpg) (http://s1124.photobucket.com/user/lacket/media/bilde.jpg.html)
And this guy sign it for me:
(http://i1124.photobucket.com/albums/l562/lacket/IMG_7761.jpeg) (http://s1124.photobucket.com/user/lacket/media/IMG_7761.jpeg.html)
He was on a visit in Norway
Very, very cool.. 8) Great pic.. :tu:
-
That's really cool Lacket 8) Congrats on meeting the man himself, and getting that sweet TTi signed, you lucky bugger :tu:
-
Lacket, do you want to trade that signed TTi against my signed ST 300? Naaah, just kidding... :D Great score! :tu:
-
Just finished a couple of weeks carrying the OHT for work. I didn't think I'd stick with it so long, but it's an endearing tool. Getting lots of use out of the long star bit, the blade is a really good size and shape for stripping coaxes and the sprung pliers are probably my favourite LM plier head.. and that's saying a lot. I love the one hand open tools, but it's just sooooo damn big to have hanging on my belt when doing office stuff and really bulks up the skinth with a small torch and bullet pen.
Anyway I have my trusty original Wave and the OHT in the car and I'll rotate them for while yet and see how it goes......
(http://i279.photobucket.com/albums/kk140/buchos400/8184cfceeabbeb95cd91eeafb72f6370.jpg)
Sent from my iPad using Tapatalk HD
-
After a good trade with a forum member here, a Charge TTI and an Expanse e55b.
This was me when the mail came. :ahhh
Now this is me. :multi:
-
Just got a juice SC2, the last model I needed to complete my juices :)
(http://img.tapatalk.com/d/13/10/07/y7e5u9yr.jpg)
(http://img.tapatalk.com/d/13/10/07/ajegu9eb.jpg)
Sent from my GT-I9300 using Tapatalk 4
-
Nice Juice collection 3in1 :tu:
-
Thanks Monrogue :cheers:
Although a lot of the credit for me having so many Leathermans must go to this place, and all the temptation it provides :ahhh
-
Thanks Monrogue :cheers:
Although a lot of the credit for me having so many Leathermans must go to this place, and all the temptation it provides :ahhh
Oh I hear that. I wouldn't have half of what I have if it wasn't for this place. I'm not complaining though ;)
-
Thanks Monrogue :cheers:
Although a lot of the credit for me having so many Leathermans must go to this place, and all the temptation it provides :ahhh
Oh I hear that. I wouldn't have half of what I have if it wasn't for this place. I'm not complaining though ;)
The only thing to complain about is not having enough yet :gimme: :gimme: :gimme:
-
@ 3n1
great juice collection and congrats for completing it.
-
i bought a brewzer and a black oxide bit driver extender for my skeletool cx.
-
Nice Juice collection 3in1 :tu: One thing though, it's complete? :pok: :pok:
-
Nice Juice collection 3in1 :tu: One thing though, it's complete? :pok: :pok:
Cheers :)
It's complete as far as models go, I know there are finishes I haven't got like the camo ones, but as far as I'm aware that is all 7 of the configurations that have been made (please don't tell me I missed one ??? )
-
Cheers :)
It's complete as far as models go, I know there are finishes I haven't got like the camo ones, but as far as I'm aware that is all 7 of the configurations that have been made (please don't tell me I missed one ??? )
Still cool to me :D
-
The blue SC2 it my favourite and most carried of the bunch. :cheers: I decided not to go for the biggest two though and stick to the five little ones. I tried a XE6 in a store and it wasn't for me. :shrug:
And no, you haven't missed any models. :D
http://forum.multitool.org/index.php/topic,44724.msg723738.html#msg723738
-
BTW, I see your SC2 suffers from different coloured scales too. :D
I wonder why they did that. :shrug:
-
BTW, I see your SC2 suffers from different coloured scales too. :D
I wonder why they did that. :shrug:
If you mean different on the SC2, it's a trick of the light both sides are the same colour. The faces of the scales are slightly tilted outward from the center line reflecting light in a different way. If you mean different from the CS4, these two are the same colour, the glacier blue.
-
BTW, I see your SC2 suffers from different coloured scales too. :D
I wonder why they did that. :shrug:
If you mean different on the SC2, it's a trick of the light both sides are the same colour. The faces of the scales are slightly tilted outward from the center line reflecting light in a different way. If you mean different from the CS4, these two are the same colour, the glacier blue.
Could you check again. :D If you read the thread I linked to till the end, you'll notice that all the other SC2 juices have one scale a slightly different shade of blue. And the SC2's are a bit darker too.
-
BTW, I see your SC2 suffers from different coloured scales too. :D
I wonder why they did that. :shrug:
If you mean different on the SC2, it's a trick of the light both sides are the same colour. The faces of the scales are slightly tilted outward from the center line reflecting light in a different way. If you mean different from the CS4, these two are the same colour, the glacier blue.
Could you check again. :D If you read the thread I linked to till the end, you'll notice that all the other SC2 juices have one scale a slightly different shade of blue. And the SC2's are a bit darker too.
I looked at your thread, you've put a lot of work in there :) and I see what you are saying, but it could be dodgy lighting, or just dodgy eyes on my part but my SC2 and CS4 look to be exactly the same colour. I'll have to have another look in the morning, in better light. I didn't compare them in much detail today, but now you've got me thinking ???
-
All the other clipped LM's get a rest cause the Freestyle CX has been carried for the past week or so. I like it alot. The drivers and carabiner on the Skele's arent missed and is a better fit clipped in the pocket.
-
How is the Freestyle? Do you find that it lacks necessary tools? :pok:
-
How is the Freestyle? Do you find that it lacks necessary tools? :pok:
It lacks everything I dont really like on the skele. Its a knife first,with the addition of other tools. Thats how I see the Freestyle and Skeletools. The ergos are a little better in my mind than the Skele. The driver on the Skele is a pain when I use the pliers. It finds its way digging into my palm. I think I've pried open more stuff than sscrewed with the Skeletools flat driver. :o I had to get it to try it and I like the Freestyle alot. Besides that my pockets and hip are lined with other shiny metal objects to replace what the Freestyle lacks.
-
LM Juice Pro :D
(http://img708.imageshack.us/img708/5964/ipnf.jpg) (http://imageshack.us/photo/my-images/708/ipnf.jpg/)
-
How is the Freestyle? Do you find that it lacks necessary tools? :pok:
It lacks everything I dont really like on the skele. Its a knife first,with the addition of other tools. Thats how I see the Freestyle and Skeletools. The ergos are a little better in my mind than the Skele. The driver on the Skele is a pain when I use the pliers. It finds its way digging into my palm. I think I've pried open more stuff than sscrewed with the Skeletools flat driver. :o I had to get it to try it and I like the Freestyle alot. Besides that my pockets and hip are lined with other shiny metal objects to replace what the Freestyle lacks.
:salute:
-
LM Juice Pro :D
(http://img708.imageshack.us/img708/5964/ipnf.jpg) (http://imageshack.us/photo/my-images/708/ipnf.jpg/)
How do you like it so far u99? I love mine and it is my EDC since I got it.
-
Got this sucker in the mail today. Its my first Juice model and so far, I'm loving it
(http://i1037.photobucket.com/albums/a455/metsfan521/20131011_205557_zpsdc14ce00.jpg)
-
Got this sucker in the mail today. Its my first Juice model and so far, I'm loving it
(http://i1037.photobucket.com/albums/a455/metsfan521/20131011_205557_zpsdc14ce00.jpg)
I know, the S2 is awesome!
-
When did the lettering change? :think:
I'm not talking about the scales print, I'm talking about the etching on the side (the spring holder thingie)
-
When did the lettering change? :think:
I'm not talking about the scales print, I'm talking about the etching on the side (the spring holder thingie)
I think it changed at the same time as the scales print, around 2010.
-
When did the lettering change? :think:
I'm not talking about the scales print, I'm talking about the etching on the side (the spring holder thingie)
I think it changed at the same time as the scales print, around 2010.
Not correct. The scales changed in the spring of 2011 and the first models still had the old etching on the springs cover. They later added the new etching. Around summer 2011 as far as I can tell. That's why both models withe new print/old etching and new print/new etching are available.
Pictures by Metal Mickey
(http://forum.multitool.org/index.php?action=dlattach;topic=24084.0;attach=46426;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=24084.0;attach=46428;image)
-
Got this sucker in the mail today. Its my first Juice model and so far, I'm loving it
(http://i1037.photobucket.com/albums/a455/metsfan521/20131011_205557_zpsdc14ce00.jpg)
I know, the S2 is awesome!
Indeed! Why I waited soooo long to get a Juice is beyond me ???
-
Indeed! Why I waited soooo long to get a Juice is beyond me ???
I didn't care for the Juice line when it came out but now I can't get enough of them :think: I was into the more heavy duty tools at the time I guess.
-
Indeed! Why I waited soooo long to get a Juice is beyond me ???
I didn't care for the Juice line when it came out but now I can't get enough of them :think: I was into the more heavy duty tools at the time I guess.
Yeah, the KF4 is pretty sweet as well. Just wish I could replace the serrated blade with scissors, then it would be pretty much perfect :tu:
-
Wow, lots of Juices today! Here's my latest... This is my only Juice, I haven't really made up my mind about it yet. It's not anything I would normally carry as it just seems to small for what I use mt MTs for. This one might end up on the trade page.
:cheers:
-
Wow, lots of Juices today! Here's my latest... This is my only Juice, I haven't really made up my mind about it yet. It's not anything I would normally carry as it just seems to small for what I use mt MTs for. This one might end up on the trade page.
:cheers:
Yeah, the good old KF4. I have this place to thank for me ending up with one (and a great member here-xdalaw). I bet you'd get rid of it quickly, depending one what you'd want in trade. It's an awesome Juice imo, with the lack of scissors being the main problem with it (for me).
-
How do you like it so far u99? I love mine and it is my EDC since I got it.
It's an interesting model. As for me, a bit overloaded. I prefer KF4.
-
When did the lettering change? :think:
I'm not talking about the scales print, I'm talking about the etching on the side (the spring holder thingie)
I think it changed at the same time as the scales print, around 2010.
Not correct. The scales changed in the spring of 2011 and the first models still had the old etching on the springs cover. They later added the new etching. Around summer 2011 as far as I can tell. That's why both models withe new print/old etching and new print/new etching are available.
Pictures by Metal Mickey
(http://forum.multitool.org/index.php?action=dlattach;topic=24084.0;attach=46426;image)
(http://forum.multitool.org/index.php?action=dlattach;topic=24084.0;attach=46428;image)
I like the old etching much better, but I have the new one on my S2.
-
I've been waiting very patiently (maybe not so much) for the last week waiting on this PST I found for a bargain on ebay. It finally made it to Alaska all the way from Florida!! It's absolutely perfect, I don't think it's ever even been fully opened. Well here are a couple pics.
-
Nice PST bdAmmo :tu: The anticipation of the arrival is the hardest part ;)
-
Nice PST bdAmmo :tu: The anticipation of the arrival is the hardest part ;)
Thanks Monrogue. This wait on this one was especially hard. The pictures the seller posted were not very good so it was hard to tell exactly what PST I was going to receive. I new it was an older one thought since it was lacking the lanyard attachment.
-
Nice PST bdAmmo :tu: The anticipation of the arrival is the hardest part ;)
Thanks Monrogue. This wait on this one was especially hard. The pictures the seller posted were not very good so it was hard to tell exactly what PST I was going to receive. I new it was an older one thought since it was lacking the lanyard attachment.
Yeah, sometimes you just don't know what you're gonna get with the PSTs since they vary so much in parts, etc. Glad you got a good one :tu:
-
Bought this silver OHT at Cabelas today. :)
-
Bought this silver OHT at Cabelas today. :)
Nice! :tu: I really wan't one of those. :drool:
-
I've been waiting very patiently (maybe not so much) for the last week waiting on this PST I found for a bargain on ebay. It finally made it to Alaska all the way from Florida!! It's absolutely perfect, I don't think it's ever even been fully opened. Well here are a couple pics.
Excellent score - I think that is one of the older PST's and to get one in that good a condition is a real find. I think (hope) I've got one the same coming too. Was yours from 1bankergirl on ebay by any chance ?
-
Bought this silver OHT at Cabelas today. :)
:drool:
-
I've been waiting very patiently (maybe not so much) for the last week waiting on this PST I found for a bargain on ebay. It finally made it to Alaska all the way from Florida!! It's absolutely perfect, I don't think it's ever even been fully opened. Well here are a couple pics.
Excellent score - I think that is one of the older PST's and to get one in that good a condition is a real find. I think (hope) I've got one the same coming too. Was yours from 1bankergirl on ebay by any chance ?
That's exactly who I got mine from. I couldn't pass it up for $30.
-
I've been waiting very patiently (maybe not so much) for the last week waiting on this PST I found for a bargain on ebay. It finally made it to Alaska all the way from Florida!! It's absolutely perfect, I don't think it's ever even been fully opened. Well here are a couple pics.
bdAmmo that is a very nice PST. :tu: That is what they looked like right after they took POCKET SURVIVAL TOOL off the handle. My first oldie PST was one of these but not NIB. :)
-
I've been waiting very patiently (maybe not so much) for the last week waiting on this PST I found for a bargain on ebay. It finally made it to Alaska all the way from Florida!! It's absolutely perfect, I don't think it's ever even been fully opened. Well here are a couple pics.
(http://forum.multitool.org/index.php?action=dlattach;topic=33794.0;attach=58706;image)
Now that's a cool find. 8)
-
Nice PST, bdAmmo. I have never seen it in such a box. :tu:
Looking at that Juice XE6 awakens the urgent wish to get one in purple soon, too. ::) :D
-
The Kick I won in Mr. Whippy's giveaway made it's way to my home! :mail:
Thoughts so far:
- Pliers are a bit stiff, and so is opening the handles.
- I quite like the toolset, though I'm a bit annoyed by the spacers.
- I think I'm quite liking this tool :D and, I got some ideas for modding it to my wishes, maybe making it knifeless... :think:
-
The Kick I won in Mr. Whippy's giveaway made it's way to my home! :mail:
Thoughts so far:
- Pliers are a bit stiff, and so is opening the handles.
- I quite like the toolset, though I'm a bit annoyed by the spacers.
- I think I'm quite liking this tool :D and, I got some ideas for modding it to my wishes, maybe making it knifeless... :think:
The Zytel tools need to be broken in...the ease with use.
They're good to mod :tu:
-
The Kick I won in Mr. Whippy's giveaway made it's way to my home! :mail:
Thoughts so far:
- Pliers are a bit stiff, and so is opening the handles.
- I quite like the toolset, though I'm a bit annoyed by the spacers.
- I think I'm quite liking this tool :D and, I got some ideas for modding it to my wishes, maybe making it knifeless... :think:
The Zytel tools need to be broken in...the ease with use.
They're good to mod :tu:
I got that feeling, yes. Also, the 'inner' edge of the Zytel is still a bit sharp, but I just assumed that'll wear down with use, as well.
About modding, I already assumed so. Even though it's got the knurled screws, at least they protrude enough to make them sort of easily unscrewable (for lack of a better word :facepalm: )
-
I found an unused PST 2 (0303 date) with leather sheath for $10 at a flea market this morning. Also got a nice old Schrade-Walden folding hunter for $7. A good day at the flea market.
-
I found an unused PST 2 (0303 date) with leather sheath for $10 at a flea market this morning. Also got a nice old Schrade-Walden folding hunter for $7. A good day at the flea market.
That PSTII was a sweet score :tu:
-
The Kick I won in Mr. Whippy's giveaway made it's way to my home! :mail:
Thoughts so far:
- Pliers are a bit stiff, and so is opening the handles.
- I quite like the toolset, though I'm a bit annoyed by the spacers.
- I think I'm quite liking this tool :D and, I got some ideas for modding it to my wishes, maybe making it knifeless... :think:
The Zytel tools need to be broken in...the ease with use.
They're good to mod :tu:
I got that feeling, yes. Also, the 'inner' edge of the Zytel is still a bit sharp, but I just assumed that'll wear down with use, as well.
About modding, I already assumed so. Even though it's got the knurled screws, at least they protrude enough to make them sort of easily unscrewable (for lack of a better word :facepalm: )
The zytel inner edge does benefit from haping a wipe over with some fine emery. As for moddability (it's not just you who can make words up :P) and making it knifeless, I have a Kick and Fuse that'll verify it can be done ;)
(http://i748.photobucket.com/albums/xx122/50ft-trad/P1010221.jpg)
(http://i748.photobucket.com/albums/xx122/50ft-trad/035-1.jpg)
(http://i748.photobucket.com/albums/xx122/50ft-trad/020-2.jpg)
(http://i748.photobucket.com/albums/xx122/50ft-trad/018-1.jpg)
(http://i748.photobucket.com/albums/xx122/50ft-trad/017-1.jpg)
(http://i748.photobucket.com/albums/xx122/50ft-trad/045.jpg)
-
That orange Fuse is great!
-
Thanks David :salute:
-
I've never seen anything like that! You're very lucky to own that orange Fuse :cheers:
-
That orange Fuse is great!
It's $89.99 in Canada... :(
-
I'd seen that orange Fuse before (still awesome, of course), not the Kick, though, and, that's pretty much what I was thinking for it, too. :tu:
I was gonna leave the normal phillips sd in, though... But, good to see at least it will fit :D
-
LM Rebar BO
(http://img.photobucket.com/albums/v601/Veetec/LMBORebar_zps606f9825.jpg) (http://smg.photobucket.com/user/Veetec/media/LMBORebar_zps606f9825.jpg.html)
-
That orange Fuse is great!
It's $89.99 in Canada... :(
Not this one ;) Look more closely :P
Black oxide tools, saw, file, mini driver, custom awl, no knife, no can opener .... :whistle:
I've never seen anything like that! You're very lucky to own that orange Fuse :cheers:
Thank you :salute:
-
(http://i748.photobucket.com/albums/xx122/50ft-trad/035-1.jpg)
I think I have seen one before with orange handles but not in BO. This is a very nice piece, 50ft. :tu:
-
I bought the Leatherman Charge TTi a few days ago. Within three days of receiving it I changed the Pliers head to the Rebar Head. (Some people call it the Recharge now). Very nice.
At a later stage I will upgrade it to the Commander.
-
I bought the Leatherman Charge TTi a few days ago. Within three days of receiving it I changed the Pliers head to the Rebar Head. (Some people call it the Recharge now). Very nice.
At a later stage I will upgrade it to the Commander.
Very cool Johan :tu: I doubt that I would ever do that myself. Oh, and
:worthless:
It would be very interesting to see a new style TTi with a Rebar head.
-
(http://img600.imageshack.us/img600/1853/gc6m.jpg) (http://imageshack.us/photo/my-images/600/gc6m.jpg/)
LM Pulse :D
-
Nothing fancy, just the Rebar + micra set. It was on clearance at cabelas(canada) for a few days at $30, so i picked up one. Should have probably bought a 2end one for my brother.
*REALLY* hate the pancake sheath they include with it. That thing is a terrible design for anything other than the bit kits. For $30 though, cant complain too much. Too bad theres no cheap way to get a leather rebar sheath in Canada(Only place that seems to sell sheaths on their own is MEC, and they only stock the nylon, premium leather and juice ones)
-
Nothing fancy, just the Rebar + micra set. It was on clearance at cabelas(canada) for a few days at $30, so i picked up one. Should have probably bought a 2end one for my brother.
*REALLY* hate the pancake sheath they include with it. That thing is a terrible design for anything other than the bit kits. For $30 though, cant complain too much. Too bad theres no cheap way to get a leather rebar sheath in Canada(Only place that seems to sell sheaths on their own is MEC, and they only stock the nylon, premium leather and juice ones)
:tu:
-
Nothing fancy, just the Rebar + micra set. It was on clearance at cabelas(canada) for a few days at $30, so i picked up one. Should have probably bought a 2end one for my brother.
*REALLY* hate the pancake sheath they include with it. That thing is a terrible design for anything other than the bit kits. For $30 though, cant complain too much. Too bad theres no cheap way to get a leather rebar sheath in Canada(Only place that seems to sell sheaths on their own is MEC, and they only stock the nylon, premium leather and juice ones)
I used to feel the same way and do about most all pancake sheaths, but I really get along with the one that came with the Rebar. I find it to fit close to my body and create a minimal "bulge."
-
Original Super Tool BO CC :D
-
Original Super Tool BO CC :D
Nice find! Have any pictures?
-
Original Super Tool BO CC :D
Nice find! Have any pictures?
Sorry, no. Everyone keeps on asking me for them, but I'm technologically challenged with crappy connection speed. Is this conspiracy Kirky's fault somehow ? ;)
Anyway, for photos have a look at the original listing on ebay for item 380741604604
http://www.ebay.com/itm/NTSA-LEATHERMAN-USA-SUPERTOOL-EOD-MULTI-TOOL-4-1-2-CLOSED-18-TOOLS-IN-ONE-/380741604604?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D380741604604%26_rdc%3D1&nma=true&si=KfGksuE0%252BFRlOwb6XhyHT4sq1Z0%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557
-
Rebar, Micra, :mail: Skeletool
-
Rebar, Micra, :mail: Skeletool
Good to see a happy MTO'er :D
-
Rebar, Micra, :mail: Skeletool
Nice :tu:
-
some nice LMs recently acquired by all . :tu:
-
I owned a Minitool a while back, but traded it off and regretted it. I happily found another one. :tu:
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%204/DSC00726_zpsd4fde2a4.jpg)
-
I owned a Minitool a while back, but traded it off and regretted it. I happily found another one. :tu:
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%204/DSC00726_zpsd4fde2a4.jpg)
nice little tool captin.
I want one or a side clip. I can't make up my mind.
-
Glad you got one. :cheers:
I've been carrying mine for the last few weeks. I don't need pliers so much so it pairs nicely to a full sized SAK. :salute:
-
I love the mini!
(http://i1117.photobucket.com/albums/k587/Syph007/Mini%20Tool/IMG_1806.jpg)
(http://i1117.photobucket.com/albums/k587/Syph007/Mini%20Tool/IMG_1808.jpg)
(http://i1117.photobucket.com/albums/k587/Syph007/Mini%20Tool/IMG_1809.jpg)
-
Must Buy Mini Tool
-
I owned a Minitool a while back, but traded it off and regretted it. I happily found another one. :tu:
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%204/DSC00726_zpsd4fde2a4.jpg)
nice little tool captin.
I want one or a side clip. I can't make up my mind.
Tough decision. :think: Are you buying one to use or for your collection.
-
I'm thinking the same thing Joel. It would go great with my One Hand Master RTE that I should have next week.
Sent from my XT901 using Tapatalk
-
Actually the Side clip may be even better.:-\
Sent from my XT901 using Tapatalk
-
I owned a Minitool a while back, but traded it off and regretted it. I happily found another one. :tu:
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%204/DSC00726_zpsd4fde2a4.jpg)
nice little tool captin.
I want one or a side clip. I can't make up my mind.
Tough decision. :think: Are you buying one to use or for your collection.
I use my tools no safe queens here.
-
I'm leaning towards the mini today
-
I'm leaning towards the mini today
I have the Sideclip and it's just like the PST but lighter and with slightly less functions.
-
I owned a Minitool a while back, but traded it off and regretted it. I happily found another one. :tu:
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%204/DSC00726_zpsd4fde2a4.jpg)
nice little tool captin.
I want one or a side clip. I can't make up my mind.
Tough decision. :think: Are you buying one to use or for your collection.
a lot of folks i know shy away from this tool thinking that it's all novelty...and boy they are absolutely mistaken
-
I'm leaning towards the mini today
I love my mini tool! Mine has no text on it so it could be a prototype or factory error but I still use it. I like to use it when a sak I'm carrying has all the tools I need but I still want real pliers. If you're using the pliers a lot though remember you have to open the tool then the handle extensions which can be annoying because it takes longer. I think the minitool is much better with the tools to surface area or weight ratio compared to Leatherman's current minimalist options (skeletool or freestyle). I mean this thing is like a micra with pst pliers! (Ok it's thicker than a micra)
...End of ramblings
-
I'm leaning towards the mini today
I love my mini tool! Mine has no text on it so it could be a prototype or factory error but I still use it. I like to use it when a sak I'm carrying has all the tools I need but I still want real pliers. If you're using the pliers a lot though remember you have to open the tool then the handle extensions which can be annoying because it takes longer. I think the minitool is much better with the tools to surface area or weight ratio compared to Leatherman's current minimalist options (skeletool or freestyle). I mean this thing is like a micra with pst pliers! (Ok it's thicker than a micra)
...End of ramblings
That's what I like about it. It would be a great compliment to a SAK or any other item like the OHTrekkers, etc. if all you want is a pair of full size pliers without much else. I like the Sideclip as well since it does have some other options.
-
Two more PSTs :facepalm:
Lowtech threatened them with salt water baths :ahhh :ahhh :ahhh ,so we negotiated a ransom for them.
One riveted PST,and a date coded 11+12/97 model
-
I own two Mini Tools and it is one of my most favorite tools although I don't carry it much at the moment (Got too many new to me tools in the past month which need to be tested/carried). Keeping its size and the "double handle mechanism" in mind it is nevertheless a solid little mt imo. The blade is about as short as the blade of a Micra but much thicker and tougher. I would say it is a heavy duty tool built for light tasks. :D
Go for one! :)
-
Did I mention my new Rebar, Micra, and Skeletool?
-
You might have, a couple of times. :P We're still waiting for pics of them though. :whistle:
-
You might have, a couple of times. :P We're still waiting for pics of them though. :whistle:
Nah, too lazy today. :oops:
-
You might have, a couple of times. :P We're still waiting for pics of them though. :whistle:
Nah, too lazy today. :oops:
>:(:o:cry:
Sent from my XT901 using Tapatalk
-
You might have, a couple of times. :P We're still waiting for pics of them though. :whistle:
Nah, too lazy today. :oops:
>:(:o:cry:
Sent from my XT901 using Tapatalk
>:D
-
You might have, a couple of times. :P We're still waiting for pics of them though. :whistle:
Nah, too lazy today. :oops:
>:(:o:cry:
Sent from my XT901 using Tapatalk
>:D
Are you related to 123? :pok: :D :D
-
You might have, a couple of times. :P We're still waiting for pics of them though. :whistle:
Nah, too lazy today. :oops:
>:(:o:cry:
Sent from my XT901 using Tapatalk
>:D
Are you related to 123? :pok: :D :D
;) :D
-
:D
-
Did I mention my new Rebar, Micra, and Skeletool?
If there's no pictures,they don't exsist :pok:
-
Just picked up a Style from REI. Really nice for such a tiny piece.
-
Did I mention my new Rebar, Micra, and Skeletool?
If there's no pictures,they don't exsist :pok:
:megaslap: again!
-
Did I mention my new Rebar, Micra, and Skeletool?
If there's no pictures,they don't exsist :pok:
:megaslap: again!
Ah,so they don't exist!
-
Did I mention my new Rebar, Micra, and Skeletool?
If there's no pictures,they don't exsist :pok:
:megaslap: again!
Ah,so they don't exist!
Of course they don't. :facepalm:
Oh yeah, and :twak:
-
Picked up a spare PST today. I couldn't resist, it was on sale and this one has the nylon sheath! :D The leather sheaths are nice but I prefer the nylon myself.
-
Nice PST bdAmmo :tu:
My latest will be a Wingman once it arrives.
-
Nice PST bdAmmo :tu:
My latest will be a Wingman once it arrives.
Schweet!¡!
-
Longtime old/new Wave user. I had "planned" to get a new Surge for my birthday in August, but the time came and went with no product release. My wife wrote me a rain-check. :angel:
Then I stumble upon this forum and began lurking. :drool:
By late September, still no sign of the 2013 Surge, tool-lust had set in. >:D
:mail: Recently received my first new multitools in a decade.... Supertool 300, Crunch and Skeletool.
I try to show them off to friends, coworkers and relatives; nobody cares until I fix something ;)
I currently struggle every morning.... which multi gets to go to work? :think:
I take all three new ones, and the Wave is on vacation :tu:
-
Longtime old/new Wave user. I had "planned" to get a new Surge for my birthday in August, but the time came and went with no product release. My wife wrote me a rain-check. :angel:
Then I stumble upon this forum and began lurking. :drool:
By late September, still no sign of the 2013 Surge, tool-lust had set in. >:D
:mail: Recently received my first new multitools in a decade.... Supertool 300, Crunch and Skeletool.
I try to show them off to friends, coworkers and relatives; nobody cares until I fix something ;)
I currently struggle every morning.... which multi gets to go to work? :think:
I take all three new ones, and the Wave is on vacation :tu:
Those are some great LM's for starters. Welcome to the forum Craiger! :cheers:
-
My NIB BO PST arrived today:
(http://img.photobucket.com/albums/v601/Veetec/Foto_zpsce6bcdf6.jpg) (http://smg.photobucket.com/user/Veetec/media/Foto_zpsce6bcdf6.jpg.html)
Unfortunately I seem to be incapable of sharpening it with my Sharpmaker and it is the same with my used BO PST CC. Did LM use a different steel or could it be because of the BO coating? Does anybody has got the same problem with older BO LM? :think:
-
Finally got my LM MUT :D
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/PIC000121.jpg)
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/PIC000122.jpg)
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/PIC000123.jpg)
-
Finally got my LM MUT :D
:tu:
You're gonna love it!
-
My new (to me) Leatherman Ukiah as arrived. :drool:
Broke out the Sharpmaker and put a nice edge on it, now I need to find some time to get outdoors and play with it.
(https://dl.dropboxusercontent.com/u/7765163/2013-10-22%2021.14.50.jpg)
(https://dl.dropboxusercontent.com/u/7765163/2013-10-22%2021.15.03.jpg)
(https://dl.dropboxusercontent.com/u/7765163/2013-10-22%2021.15.52.jpg)
(https://dl.dropboxusercontent.com/u/7765163/2013-10-22%2021.16.35.jpg)
-
I like the Sideclip.
-
My NIB BO PST arrived today:
(http://img.photobucket.com/albums/v601/Veetec/Foto_zpsce6bcdf6.jpg) (http://smg.photobucket.com/user/Veetec/media/Foto_zpsce6bcdf6.jpg.html)
Unfortunately I seem to be incapable of sharpening it with my Sharpmaker and it is the same with my used BO PST CC. Did LM use a different steel or could it be because of the BO coating? Does anybody has got the same problem with older BO LM? :think:
I doubt it's the coating, as I'm fairly sure BO isn't anywhere near as hard as the SM stones. It should abrade away normally. Is the edge bevel itself coated? Perhaps the coating is coming off and clogging up the stone.
It could also be the angle, as some PSTs I've seen have bevel sharpened in that are either at or greater the 20 degree per side SM angles.
If you'd like, I'd be happy to either sharpen or reprofile the blade for you on my Wicked Edge. I'm pretty certain the PST also uses 420HC, so it isn't likely to be a steel issue.
-
I like the Sideclip.
Thanks! I put it there for scale, but it is a nice piece, isn't it?
I just scored a duplicate off Ebay for a good price, so I'm trying to decide which one I want to sell off to offset the knife's cost. Or maybe just to finance the next find. :angel:
-
I doubt it's the coating, as I'm fairly sure BO isn't anywhere near as hard as the SM stones. It should abrade away normally. Is the edge bevel itself coated? Perhaps the coating is coming off and clogging up the stone.
It could also be the angle, as some PSTs I've seen have bevel sharpened in that are either at or greater the 20 degree per side SM angles.
If you'd like, I'd be happy to either sharpen or reprofile the blade for you on my Wicked Edge. I'm pretty certain the PST also uses 420HC, so it isn't likely to be a steel issue.
Thank you very much for your friendly offer, but I guess sending it from Germany to the USA and back again is a bit inconvenient for the problem. ;) :tu: I think I just have to take the time and keep on sharpening for some more hours. :D
No, the coating itself shouldn´t be the problem. But maybe it prevents the blade from cutting well when doing a paper cut test because of the extra friction?! Even then I should get the edge hair shaving sharp under normal circumstances though. :think:
The bevel itself is not coated and visually everything should be fine. I guess the angle of the edge is disadvantageous for the Sharpmaker. ???
-
Is the edge bevel itself coated?
Okay, it really is the angle of the edge. Your question gave me the idea to paint the edge with a marker and use the Sharpmaker again. The result is that the paint is now away on the upper part of the edge and the lower part stayed painted. That means the ceramic rods don´t touch the actual cutting part of the edge yet. That is why it doesn´t become sharp. (Does that make any sense? It is difficult to explain for me in english. Sorry!)
-
No, that is absolutely correct. I was going there next, to use marker to show where material is being removed by the stone.
The Sharpmaker works if the edge is either the same angle or less than the stone angles, which is why I often make the edges a bit below 20 degrees.
You could just adjust how you hold the blade, trying to stay consistent. :)
-
My $4 Style CS
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/null_zps167a5ea3.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/null_zps167a5ea3.jpg.html)
-
I'd call that money well spent. :2tu:
Where did you find it?
-
I got this ST300 from Chris/Magic Bus yesterday..
(https://lh5.googleusercontent.com/-tEQd3BkYayM/UmlAZL5DAZI/AAAAAAAAINM/zxixuYtjdYY/s640/IMG_2917.JPG)
And this RadioShack E4 from Philty arrived today.. :)
(https://lh5.googleusercontent.com/-Vt-Rlhqowrg/UmlAhe62DCI/AAAAAAAAINQ/hVfeV--ENuo/s640/IMG_2921.JPG)
-
You could just adjust how you hold the blade, trying to stay consistent. :)
I am not very good at that, so I think I will just use the angle of the Sharpmaker for another hour. :D The lower part of the blade is already shaving sharp but the rest is still dull. :facepalm:
Thanks for your help anyway. :cheers:
-
I'd call that money well spent. :2tu:
Where did you find it?
The airport chapel had a sale on today. :D
Sent from my iPhone 5 using Tapatalk
-
The airport chapel had a sale on today. :D
Sent from my iPhone 5 using Tapatalk
Wish my airport had a chapel sale :dd:
-
My $4 Style CS
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/null_zps167a5ea3.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/null_zps167a5ea3.jpg.html)
:tu: Hope you like it!
-
My squirt ps4 arrived today.
-
My squirt ps4 arrived today.
What colour?
-
Red and I like it a lot!
(http://i1037.photobucket.com/albums/a455/metsfan521/20131024_182612_zps9239e6e4.jpg)
-
Just won a KF4 on the Bay. :gimme: :multi:
-
Just won a KF4 on the Bay. :gimme: :multi:
Gratz sticky :)
-
Just won a KF4 on the Bay. :gimme: :multi:
That's great, I hope you enjoy it :tu: I really like mine.
-
Just got my 30th anniversary 24k gold plated charge (http://img.tapatalk.com/d/13/10/25/u9e8a7u3.jpg)
-
Just won a KF4 on the Bay. :gimme: :multi:
Nice! Congrats. :tu:
-
awesome 30th anniversary set Emil :tu:
Just won a BO PST Saber blade and a Japanese riveted PST but the pictures were a bit rough so we will see just what I bought :whistle:. I also got a small LM leather sheath that will house the Japanese PST.
-
Red and I like it a lot!
(http://i1037.photobucket.com/albums/a455/metsfan521/20131024_182612_zps9239e6e4.jpg)
My red one is awesome too!
Just got my 30th anniversary 24k gold plated charge (http://img.tapatalk.com/d/13/10/25/u9e8a7u3.jpg)
It's very cheap here: http://www.ebay.ca/itm/Leatherman-Charge-TTi-2013-Multi-Tool-24k-Gold-Series-Fully-Gold-Edition-/251237607552?pt=LH_DefaultDomain_0&var=550218072794&hash=item3a7eeda880
-
Just got my 30th anniversary 24k gold plated charge (http://img.tapatalk.com/d/13/10/25/u9e8a7u3.jpg)
It's very cheap here: http://www.ebay.ca/itm/Leatherman-Charge-TTi-2013-Multi-Tool-24k-Gold-Series-Fully-Gold-Edition-/251237607552?pt=LH_DefaultDomain_0&var=550218072794&hash=item3a7eeda880
That's the regular version. Emil's is part of a limited numbered edition with Tim Leatherman's signature engraved.
-
Just got my 30th anniversary 24k gold plated charge (http://img.tapatalk.com/d/13/10/25/u9e8a7u3.jpg)
It's very cheap here: http://www.ebay.ca/itm/Leatherman-Charge-TTi-2013-Multi-Tool-24k-Gold-Series-Fully-Gold-Edition-/251237607552?pt=LH_DefaultDomain_0&var=550218072794&hash=item3a7eeda880
That's the regular version. Emil's is part of a limited numbered edition with Tim Leatherman's signature engraved.
They have a regular edition and a special edition? :facepalm:
-
If I had to list items which would be inappropriate to own in gold-plate, it would be a multitool at the top of the list. Carbon fibre, titanium, speSmurfpillst steels? Yes, please.
IMO a bling-fest of decoration cheapens the high-utility nature of the tool. See also gold mobile phones.
W
-
(http://img35.imageshack.us/img35/7819/v0sa.JPG) (http://imageshack.us/photo/my-images/35/v0sa.JPG/)
Rime >:D
-
My latest two, courtesy of Accujohn. :tu:
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2081_zps9688a9f3.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2081_zps9688a9f3.jpg.html)
-
Nice pair you got there JD :tu:
I thought I was getting my Wingman today since the package's tracking had it listed as delivered on Saturday morning to the PO. This means it should have been in my work's morning mail pickup today, but it wasn't. This happened just last week with my SOG PPP as well, and they had put it on the town's route instead of in the PO box to which it belonged. I'm hoping that's what happened this time as well, and I'll have it tomorrow morning. We'll see...
-
So I didn't get my Wingman this morning like I hoped. I went to the PO a little bit ago to ask about the package, and it turns out it had been put in the PO box right next to my work's box. So it had been sitting there for a couple days, and I'm lucky it didn't get picked up and kept by the owner of that box. So now I have my Wingman, and I'll post pics tonight. First impression is that I like it, especially the scissors and spring loaded pliers :D
-
So I didn't get my Wingman this morning like I hoped. I went to the PO a little bit ago to ask about the package, and it turns out it had been put in the PO box right next to my work's box. So it had been sitting there for a couple days, and I'm lucky it didn't get picked up and kept by the owner of that box. So now I have my Wingman, and I'll post pics tonight. First impression is that I like it, especially the scissors and spring loaded pliers :D
Glad you like the Wingman, but all I get from your post is that the USPS is steadily getting worse! :ahhh They keep getting worse and mailing things keeps getting more expensive. :D
-
So I didn't get my Wingman this morning like I hoped. I went to the PO a little bit ago to ask about the package, and it turns out it had been put in the PO box right next to my work's box. So it had been sitting there for a couple days, and I'm lucky it didn't get picked up and kept by the owner of that box. So now I have my Wingman, and I'll post pics tonight. First impression is that I like it, especially the scissors and spring loaded pliers :D
Yeah another multitool! I had two wingmans (wingmen?)before I got my first non-spring loaded MT and I have to say it was very difficult to adjust. And now that a thief and Lowtech each have a wingman from me, I kinda miss them. On both of my wingman I was laughing when the package said 8inch ruler. No one could mistake that for 8"!
-
Glad you like the Wingman, but all I get from your post is that the USPS is steadily getting worse! :ahhh They keep getting worse and mailing things keeps getting more expensive. :D
Yeah, this was the second consecutive time the same PO messed up the delivery of an order, and both times within a week of each other. Not very confident in them now. Also, I've heard that postage is going up from $0.46 to $0.49 in January I think :facepalm:
Yeah another multitool! I had two wingmans (wingmen?)before I got my first non-spring loaded MT and I have to say it was very difficult to adjust. And now that a thief and Lowtech each have a wingman from me, I kinda miss them. On both of my wingman I was laughing when the package said 8inch ruler. No one could mistake that for 8"!
Yeah baby :D Maybe that's why I love the Wingman so much. Instead of having it as my first MT and then adjusting to not spring loaded pliers, I am getting to enjoy them after being used to regular pliers. I must say, I will have a tough time wanting to go back to non-spring pliers. I don't really use the pliers much at all for this to be as big of a deal as I'm making it out to be, but I still can't deny how much easier spring loaded pliers are to operate for me, especially for the smaller type tasks I typically encounter at work. It will make certain tasks easier to handle. Perhaps the spring loaded feature weakens the strength of the pliers (I think I've read that somewhere), but I honestly don't do anything strenuous on them, and it feels solid overall to me. I can squeeze the handles hard and there's almost no flex in the handles whatsoever :tu:
-
Oh yeah, pics :D
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20131029_125027_083_zpscd175324.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20131029_125027_083_zpscd175324.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20131029_124917_669_zps36933ce9.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20131029_124917_669_zps36933ce9.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20131029_124837_595_zps9d56628d.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20131029_124837_595_zps9d56628d.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20131029_124854_774_zps71944c17.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20131029_124854_774_zps71944c17.jpg.html)
-
Nice one Kyle. I tried so hard to like that one but I just couldn't.
-
Nice one Kyle. I tried so hard to like that one but I just couldn't.
Thanks man :salute: Why didn't you get along with it?
-
Cool Wingman Monrogue! This past summer I used my Wingman way more than any of my other Leatherman tools. The spring loaded pliers, pocket clip, and scissors make it an excellent fishing tool. Plus, when I dropped it in the Kenai river several times... it's no big deal, it only cost me $20!
-
Thanks man :salute: Why didn't you get along with it?
It just felt cheap to me. The only tool on the kit I liked was the package opener.
-
Cool Wingman Monrogue! This past summer I used my Wingman way more than any of my other Leatherman tools. The spring loaded pliers, pocket clip, and scissors make it an excellent fishing tool. Plus, when I dropped it in the Kenai river several times... it's no big deal, it only cost me $20!
Thanks bdAmmo :salute: It really is a great tool, especially for the price. It makes me wonder why they don't have more spring loaded plier tools when you consider how cheap this one is. Perhaps spring loading the pliers is actually cheaper than the normal plier heads? I really wouldn't know...
Thanks man :salute: Why didn't you get along with it?
It just felt cheap to me. The only tool on the kit I liked was the package opener.
I can see and feel the difference between it and say the Charge or Wave for sure, but it doesn't feel like it's going to fall apart on me or anything like that. However, for all I know, if I were to put it through some tougher work, it may not hold up well. I can't really say for sure as I haven't tested any of my MTs in that capacity. I'm fairly confident that it will be sufficient for my normal daily life :tu: But to each their own, that's part of what makes this place interesting and informative :D
-
I can see and feel the difference between it and say the Charge or Wave for sure, but it doesn't feel like it's going to fall apart on me or anything like that. However, for all I know, if I were to put it through some tougher work, it may not hold up well. I can't really say for sure as I haven't tested any of my MTs in that capacity. I'm fairly confident that it will be sufficient for my normal daily life :tu: But to each their own, that's part of what makes this place interesting and informative :D
I got the kids and a few of their friends each one for Christmas last year and they seem to be holding up well. Just not my cup of tea, that's all.
-
You have the new style Wingman! :tu:
-
Meet Mr. Crunchy
(http://i1211.photobucket.com/albums/cc421/JAfromMn/temporary_zps46bc8a20.jpg)
-
Meet Mr. Crunchy
(http://i1211.photobucket.com/albums/cc421/JAfromMn/temporary_zps46bc8a20.jpg)
Cool! A true classic from earlier days at Leatherman.
-
Meet Mr. Crunchy
(http://i1211.photobucket.com/albums/cc421/JAfromMn/temporary_zps46bc8a20.jpg)
Very nice! Is it your first one?
-
JA now you need to learn how to OHO it
Sent from my RM-845_nam_vzw_100 using Tapatalk
-
Meet Mr. Crunchy
(http://i1211.photobucket.com/albums/cc421/JAfromMn/temporary_zps46bc8a20.jpg)
Very nice! Is it your first one?
yup also the first crunch I've seen in person.
its a little smaller than I thought it would be.
I'm happy with it.
JA now you need to learn how to OHO it
Sent from my RM-845_nam_vzw_100 using Tapatalk
its gonna take a lot of playing around with it until I can do that.
its super stiff now.
-
I bought a Leatherman Wave today for my son's birthday on November 1st.
-
Have fun with the Crunch Joel :tu:
-
@monrogue,
good to see your wingman in your hands. i like it and while mine is taking time off it was a great tool for me. the package opener is slick and will be great for opening xmas gifts in clam shells and other type packaging. the spring loaded pliers is a nice feature when used repeatedly and i too could squeeze the heck out of them and saw or felt no issues.
-
@monrogue,
good to see your wingman in your hands. i like it and while mine is taking time off it was a great tool for me. the package opener is slick and will be great for opening xmas gifts in clam shells and other type packaging. the spring loaded pliers is a nice feature when used repeatedly and i too could squeeze the heck out of them and saw or felt no issues.
Thanks Aloha :salute: Oh I bet the package opener will be great for stuff like that. I can see it being rather useful really. Yeah, the pliers feel solid to me, and spring loaded is so much better for me, even if I don't use the pliers much, it's a big help.
-
I bought a Leatherman Wave today for my son's birthday on November 1st.
Cool, I'm sure he'll like it!
Sent from my iPhone 5 using Tapatalk (http://tapatalk.com/m?id=1)
-
I bought a Leatherman Wave today for my son's birthday on November 1st.
what a great gift that should get him many years of use and wonderful stories. awesome gift dad :2tu:
-
I bought the Surge for my Birthday in Dec but couldn't wait to use it so my Wife and kids relented and I started using it over 2 weeks ago.
The Surge came with a 42 Bit Kit and a Led Lenser P3
(http://img19.imageshack.us/img19/8310/xvs9.jpg)
-
Well I'm just speechless. The 2 squirts that I bought off Philthy last week arrived today!!!
How in gods name he managed that I will never know. Dispatched on the 1st and delivered today the 5th,
All the way from NY USA to Sheffield UK in 4 days. - I think you'll all have to agree that must rank as one of the fastest international deliveries ever.
I'm just dumbstruck - amazing Philthy, simply amazing.
.....and the squirts are even better than they looked in the pictures win-win :tu:
-
Well I'm just speechless. The 2 squirts that I bought off Philthy last week arrived today!!!
How in gods name he managed that I will never know. Dispatched on the 1st and delivered today the 5th,
All the way from NY USA to Sheffield UK in 4 days. - I think you'll all have to agree that must rank as one of the fastest international deliveries ever.
I'm just dumbstruck - amazing Philthy, simply amazing.
.....and the squirts are even better than they looked in the pictures win-win :tu:
:worthless:
-
Uh oh!¡! :rofl:
-
Uh oh!¡! :rofl:
:D
-
I have found out once you buy one Leatherman, you just want another and another......When does this madness stop? :facepalm: bought a Wave, then bought a OHT which is one of my favorite tools of all time, and now I want a Charge TTI. :facepalm:
-
I have found out once you buy one Leatherman, you just want another and another......When does this madness stop? :facepalm: bought a Wave, then bought a OHT which is one of my favorite tools of all time, and now I want a Charge TTI. :facepalm:
Same happened to me got the LM Rebar & LM Micra set then started looking at either the Wave, Charge TTi or Surge, ended up with the Surge its one heck of a MT, screams Heavy Duty :multi:
My new issues is Skinth sheaths, got the Skith OG case but it came with a belt loop so may look at getting the Skinth Plus / XL or MG with Mollie Tab or Belt clip so many decissions... :ahhh
-
I have found out once you buy one Leatherman, you just want another and another......When does this madness stop? :facepalm: bought a Wave, then bought a OHT which is one of my favorite tools of all time, and now I want a Charge TTI. :facepalm:
They are very addicting! I have bought 17 since August!
-
I have found out once you buy one Leatherman, you just want another and another......When does this madness stop? :facepalm: bought a Wave, then bought a OHT which is one of my favorite tools of all time, and now I want a Charge TTI. :facepalm:
They are very addicting! I have bought 17 since August!
Good man! :tu: :D
-
I have found out once you buy one Leatherman, you just want another and another......When does this madness stop? :facepalm: bought a Wave, then bought a OHT which is one of my favorite tools of all time, and now I want a Charge TTI. :facepalm:
They are very addicting! I have bought 17 since August!
Good man! :tu: :D
Lol tell that to my bank account! ;p
-
I can barely afford all the multitools I want.....I do have 2 PST's and an original super tool back home, I can't wait to back to pick them up now that I found this forum. :multi:
-
After going back and forth for a long time I saw a great price and got a skeletool. What I thought about before I got it ended up being the same way I feel about now that I have one. I like the idea but not the final product.
Don't like the bottle opener, don't like that you can't use the bit driver with the handle closed, looks cool but doesn't feel as good in my hand as I thought it would and a little heavy/long for the size.
I thought that this is a love it or not type of tool for people who like leatherman tools and I don't love it but I am not able to completely not like it either, there is something to it. I think that I will get a freestyle and try to mod it so I can get rid of the bottle opener.
For this size tool the juice line is better, even if it's not cooler. In my humble opinion.
-
After going back and forth for a long time I saw a great price and got a skeletool. What I thought about before I got it ended up being the same way I feel about now that I have one. I like the idea but not the final product.
Don't like the bottle opener, don't like that you can't use the bit driver with the handle closed, looks cool but doesn't feel as good in my hand as I thought it would and a little heavy/long for the size.
I thought that this is a love it or not type of tool for people who like leatherman tools and I don't love it but I am not able to completely not like it either, there is something to it. I think that I will get a freestyle and try to mod it so I can get rid of the bottle opener.
For this size tool the juice line is better, even if it's not cooler. In my humble opinion.
Sounds like you have the same thoughts on the Skeletool as me. Looks cool, but I don't think I would like it to use.
I actually made the choice between one of them and the Rebar + Micra set yesterday and I went with the Rebar/Micra.
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20131105_163735_zpsf319e5c2.jpg) (http://s1309.photobucket.com/user/Peter_Thorpe/media/20131105_163735_zpsf319e5c2.jpg.html)
This will be a work tool and I didn't want to mess up my Wave or Swisstool (so shiny).
-
After going back and forth for a long time I saw a great price and got a skeletool. What I thought about before I got it ended up being the same way I feel about now that I have one. I like the idea but not the final product.
Don't like the bottle opener, don't like that you can't use the bit driver with the handle closed, looks cool but doesn't feel as good in my hand as I thought it would and a little heavy/long for the size.
I thought that this is a love it or not type of tool for people who like leatherman tools and I don't love it but I am not able to completely not like it either, there is something to it. I think that I will get a freestyle and try to mod it so I can get rid of the bottle opener.
For this size tool the juice line is better, even if it's not cooler. In my humble opinion.
Sounds like you have the same thoughts on the Skeletool as me. Looks cool, but I don't think I would like it to use.
I actually made the choice between one of them and the Rebar + Micra set yesterday and I went with the Rebar/Micra.
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20131105_163735_zpsf319e5c2.jpg) (http://s1309.photobucket.com/user/Peter_Thorpe/media/20131105_163735_zpsf319e5c2.jpg.html)
This will be a work tool and I didn't want to mess up my Wave or Swisstool (so shiny).
Wow, I bought both of them in my order! :ahhh
They're all great multitools. :tu:
-
After going back and forth for a long time I saw a great price and got a skeletool. What I thought about before I got it ended up being the same way I feel about now that I have one. I like the idea but not the final product.
Don't like the bottle opener, don't like that you can't use the bit driver with the handle closed, looks cool but doesn't feel as good in my hand as I thought it would and a little heavy/long for the size.
I thought that this is a love it or not type of tool for people who like leatherman tools and I don't love it but I am not able to completely not like it either, there is something to it. I think that I will get a freestyle and try to mod it so I can get rid of the bottle opener.
For this size tool the juice line is better, even if it's not cooler. In my humble opinion.
Sounds like you have the same thoughts on the Skeletool as me. Looks cool, but I don't think I would like it to use.
I actually made the choice between one of them and the Rebar + Micra set yesterday and I went with the Rebar/Micra.
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20131105_163735_zpsf319e5c2.jpg) (http://s1309.photobucket.com/user/Peter_Thorpe/media/20131105_163735_zpsf319e5c2.jpg.html)
This will be a work tool and I didn't want to mess up my Wave or Swisstool (so shiny).
Wow, I bought both of them in my order! :ahhh
They're all great multitools. :tu:
+1 - A very good tool set indeed :tu:
-
After going back and forth for a long time I saw a great price and got a skeletool. What I thought about before I got it ended up being the same way I feel about now that I have one. I like the idea but not the final product.
Don't like the bottle opener, don't like that you can't use the bit driver with the handle closed, looks cool but doesn't feel as good in my hand as I thought it would and a little heavy/long for the size.
I thought that this is a love it or not type of tool for people who like leatherman tools and I don't love it but I am not able to completely not like it either, there is something to it. I think that I will get a freestyle and try to mod it so I can get rid of the bottle opener.
For this size tool the juice line is better, even if it's not cooler. In my humble opinion.
Sounds like you have the same thoughts on the Skeletool as me. Looks cool, but I don't think I would like it to use.
I actually made the choice between one of them and the Rebar + Micra set yesterday and I went with the Rebar/Micra.
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20131105_163735_zpsf319e5c2.jpg) (http://s1309.photobucket.com/user/Peter_Thorpe/media/20131105_163735_zpsf319e5c2.jpg.html)
This will be a work tool and I didn't want to mess up my Wave or Swisstool (so shiny).
Wow, I bought both of them in my order! :ahhh
They're all great multitools. :tu:
You still NEED a Surge. I'm just sayin. :poke:
:))
sent from Nate's mobile
-
Meet Mr. Crunchy
(http://i1211.photobucket.com/albums/cc421/JAfromMn/temporary_zps46bc8a20.jpg)
The Crunch is an awesome multitool! :tu:
-
After going back and forth for a long time I saw a great price and got a skeletool. What I thought about before I got it ended up being the same way I feel about now that I have one. I like the idea but not the final product.
Don't like the bottle opener, don't like that you can't use the bit driver with the handle closed, looks cool but doesn't feel as good in my hand as I thought it would and a little heavy/long for the size.
I thought that this is a love it or not type of tool for people who like leatherman tools and I don't love it but I am not able to completely not like it either, there is something to it. I think that I will get a freestyle and try to mod it so I can get rid of the bottle opener.
For this size tool the juice line is better, even if it's not cooler. In my humble opinion.
Sounds like you have the same thoughts on the Skeletool as me. Looks cool, but I don't think I would like it to use.
I actually made the choice between one of them and the Rebar + Micra set yesterday and I went with the Rebar/Micra.
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20131105_163735_zpsf319e5c2.jpg) (http://s1309.photobucket.com/user/Peter_Thorpe/media/20131105_163735_zpsf319e5c2.jpg.html)
This will be a work tool and I didn't want to mess up my Wave or Swisstool (so shiny).
Wow, I bought both of them in my order! :ahhh
They're all great multitools. :tu:
You still NEED a Surge. I'm just sayin. :poke:
:))
sent from Nate's mobile
Too heavy. :rant:
-
I agree, the rebar is great, I was really impressed when I got a rebar, the tool set compared to size/weight is fantastic. I compared one to the skeletool and have to say that it does not weight that much more than the skeletool and is not as long, but is thicker. The rebar does need a pocket clip!
I would love to see a thinner version of the rebar, say one side flat like the fuse. You would have to take out a few tools, (serrated blade, saw or file and a couple others like the can opener), but it would be thinner and a little light and with a pocket clip would make a much better pocket tool that the skeletool.
-
The tool you are describing sounds a bit like the Kick, with its optional pocket clip. That is a great lightweight tool and it is available at a sensible price. :pok:
-
It was a very LM birthday this year. Added a Supertool 300 from my wife and a Wave from my best friend.
(http://img.tapatalk.com/d/13/11/08/upehanev.jpg)
Also added but not pictured a Gerber Flik, SAK Farmer and Classic SD.
-
It was a very LM birthday this year. Added a Supertool 300 from my wife and a Wave from my best friend.
(http://img.tapatalk.com/d/13/11/08/upehanev.jpg)
Also added but not pictured a Gerber Flik, SAK Farmer and Classic SD.
Great gifts! And Happy Birthday! :cheers:
-
It was a very LM birthday this year. Added a Supertool 300 from my wife and a Wave from my best friend.
(http://img.tapatalk.com/d/13/11/08/upehanev.jpg)
Also added but not pictured a Gerber Flik, SAK Farmer and Classic SD.
Sounds like a good b-day haul to me :tu:
-
I've had these for a couple weeks, but just got my photo account back online. My wife has stolen the Skeletool.... Now I just gotta convince her to actually take it with her, or at least put it in her car!
(http://farm6.staticflickr.com/5481/10736840185_3514041593_z.jpg) (http://www.flickr.com/photos/climbercraig66/10736840185/)
P1010394 (http://www.flickr.com/photos/climbercraig66/10736840185/#) by climbercraig66 (http://www.flickr.com/people/climbercraig66/), on Flickr
(http://farm3.staticflickr.com/2832/10736834135_7128e9d374_z.jpg) (http://www.flickr.com/photos/climbercraig66/10736834135/)
P1010401 (http://www.flickr.com/photos/climbercraig66/10736834135/#) by climbercraig66 (http://www.flickr.com/people/climbercraig66/), on Flickr
(http://farm4.staticflickr.com/3695/10736919554_4df68a970e_z.jpg) (http://www.flickr.com/photos/climbercraig66/10736919554/)
P1010405 (http://www.flickr.com/photos/climbercraig66/10736919554/#) by climbercraig66 (http://www.flickr.com/people/climbercraig66/), on Flickr
(http://farm4.staticflickr.com/3820/10736912836_b0238b7434_z.jpg) (http://www.flickr.com/photos/climbercraig66/10736912836/)
P1010407 (http://www.flickr.com/photos/climbercraig66/10736912836/#) by climbercraig66 (http://www.flickr.com/people/climbercraig66/), on Flickr
(http://farm4.staticflickr.com/3694/10736914814_2a91818ea2_z.jpg) (http://www.flickr.com/photos/climbercraig66/10736914814/)
P1010469 (http://www.flickr.com/photos/climbercraig66/10736914814/#) by climbercraig66 (http://www.flickr.com/people/climbercraig66/), on Flickr
-
Quite a few nice items. :2tu:
-
:gimme:
-
My Core finally showed up! :ahhh
-
Got the New Leatherman Surge in the mail today (model with removable wire cutters. Going to post a video comparing it to the old surge to YouTube tonight. really liking the new tool.
EDC: Charge TTI
Out Doors Tool: Surge
Tool Box: ST 300
http://www.youtube.com/user/gearsNtools
-
Got the New Leatherman Surge in the mail today (model with removable wire cutters. Going to post a video comparing it to the old surge to YouTube tonight. really liking the new tool.
EDC: Charge TTI
Out Doors Tool: Surge
Tool Box: ST 300
http://www.youtube.com/user/gearsNtools
Awesome! So where did you buy your Surge from?
-
Got the New Leatherman Surge in the mail today (model with removable wire cutters. Going to post a video comparing it to the old surge to YouTube tonight. really liking the new tool.
EDC: Charge TTI
Out Doors Tool: Surge
Tool Box: ST 300
http://www.youtube.com/user/gearsNtools
Awesome! So where did you buy your Surge from?
I got it at REI.com it said it was on back order but when I ordered it came the next day, must have gotten in on the next wave of shipments.
here is a link to the video I did. :cheers:
https://www.youtube.com/watch?v=09OrC-zhaPc&feature=c4-overview&list=UUIxNYWrCdqgcAVnoYun-aVA
-
Sideclip
-
I bought a Wingman for $15 with my Veteran discount today. Couldn't resist. :facepalm:
-
stopped by the LM retail store today and picked up a new Surge... couldn't resist. :D
-
stopped by the LM retail store today and picked up a new Surge... couldn't resist. :D
Sure would like to know what you think about it, when you get the chance to give it a good workout.
-
stopped by the LM retail store today and picked up a new Surge... couldn't resist. :D
Sure would like to know what you think about it, when you get the chance to give it a good workout.
Will do. :salute: I'll also try to get some good pics of the changes they made to the handle design to accommodate the larger plier head.
sidenote: the LM employee who helped me was very impressed with my ReCharge -- she said it was the best mod work she's ever seen. :) I told her that's only because Metro lives in Canada and has never been to LM HQ. Then she gave me a funny look. ???
ok, so I didn't actually say that, but it was the first thing that came to mind. :D
-
it would be amazing to see Metro invited to Leatherman to produce a run of LM tools. I have been praying for that since being introduced to his work. Imagine him with all the machines and support to make it happen :ahhh. LEATHERMAN DO YOU HEAR ME??????? I'll keep praying in the mean time.
-
I just picked up a new Rebar the other day. I gave my first one to my Dad last year for fathers day and really missed it from day one. It's great to have it back.
-
I just picked up a new Rebar the other day. I gave my first one to my Dad last year for fathers day and really missed it from day one. It's great to have it back.
That's cool. Glad you got another one :tu:
-
That's cool. Glad you got another one :tu:
+1 :tu:
-
Got the sidekick this week and been using it at work,its actually better than i thought it would be, phillips has worked well,pliers work well,wirecuters ok,blade cuts things,saw saw things,tin opener opens tins,etc etc,build good,looks good,not super comfy but hey the old wave isnt and i love them :D all in all very happy with the sidekick :salute:
-
Got the sidekick this week and been using it at work,its actually better than i thought it would be, phillips has worked well,pliers work well,wirecuters ok,blade cuts things,saw saw things,tin opener opens tins,etc etc,build good,looks good,not super comfy but hey the old wave isnt and i love them :D all in all very happy with the sidekick :salute:
well said and glad you are getting along with the tool.
-
Got the sidekick this week and been using it at work,its actually better than i thought it would be, phillips has worked well,pliers work well,wirecuters ok,blade cuts things,saw saw things,tin opener opens tins,etc etc,build good,looks good,not super comfy but hey the old wave isnt and i love them :D all in all very happy with the sidekick :salute:
Glad to hear it. I'm happy someone else is pleased with the Wingman/Sidekick, and I'm sure you put yours to more work than I to see how well it works :tu:
-
Got the sidekick this week and been using it at work,its actually better than i thought it would be, phillips has worked well,pliers work well,wirecuters ok,blade cuts things,saw saw things,tin opener opens tins,etc etc,build good,looks good,not super comfy but hey the old wave isnt and i love them :D all in all very happy with the sidekick :salute:
Glad to hear it. I'm happy someone else is pleased with the Wingman/Sidekick, and I'm sure you put yours to more work than I to see how well it works :tu:
I'm quite impressed with the Wingman for $15. :) I love the sping loaded pliers.
-
Got the sidekick this week and been using it at work,its actually better than i thought it would be, phillips has worked well,pliers work well,wirecuters ok,blade cuts things,saw saw things,tin opener opens tins,etc etc,build good,looks good,not super comfy but hey the old wave isnt and i love them :D all in all very happy with the sidekick :salute:
Glad to hear it. I'm happy someone else is pleased with the Wingman/Sidekick, and I'm sure you put yours to more work than I to see how well it works :tu:
I'm quite impressed with the Wingman for $15. :) I love the sping loaded pliers.
Me too. And you definitely got a sweet deal there :tu: Still, even at full price I feel that it is a great multitool :tu:
-
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out :tu:
-
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out :tu:
Did you put it through any hard use? Just curious as I know the quality/durability factor seemed to be an issue for some. I don't really ever get to test my MTs to the limit so to speak, so it's hard for me to make any claims about quality/durability from first hand experience.
-
I bought a new (used) OHT yesterday, today I used it at work. A real great MT, I really like it :)
-
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out :tu:
Did you put it through any hard use? Just curious as I know the quality/durability factor seemed to be an issue for some. I don't really ever get to test my MTs to the limit so to speak, so it's hard for me to make any claims about quality/durability from first hand experience.
I would say i used it as hard as any dedicated tool,i did fold up the phillips today but no locks so this happens, the wirecutters cut coat hanger gauge tubing ok but not so well on some thicker electrical wires but ok on thinner,the blade is smooth and nice shape and sharp,a bit of up and down wiggle but nothing ill stress about,again a mt saves me from going back and forth to my tool bag,a 1/4 socket fits the phillips so you could use other bits :tu:
-
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out :tu:
Did you put it through any hard use? Just curious as I know the quality/durability factor seemed to be an issue for some. I don't really ever get to test my MTs to the limit so to speak, so it's hard for me to make any claims about quality/durability from first hand experience.
I would say i used it as hard as any dedicated tool,i did fold up the phillips today but no locks so this happens, the wirecutters cut coat hanger gauge tubing ok but not so well on some thicker electrical wires but ok on thinner,the blade is smooth and nice shape and sharp,a bit of up and down wiggle but nothing ill stress about,again a mt saves me from going back and forth to my tool bag,a 1/4 socket fits the phillips so you could use other bits :tu:
Nice. I didn't know about the socket trick though. Not that I ever have/carry a socket and bits, but still handy to some I'm sure :tu:
-
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out :tu:
Did you put it through any hard use? Just curious as I know the quality/durability factor seemed to be an issue for some. I don't really ever get to test my MTs to the limit so to speak, so it's hard for me to make any claims about quality/durability from first hand experience.
I would say i used it as hard as any dedicated tool,i did fold up the phillips today but no locks so this happens, the wirecutters cut coat hanger gauge tubing ok but not so well on some thicker electrical wires but ok on thinner,the blade is smooth and nice shape and sharp,a bit of up and down wiggle but nothing ill stress about,again a mt saves me from going back and forth to my tool bag,a 1/4 socket fits the phillips so you could use other bits :tu:
Nice. I didn't know about the socket trick though. Not that I ever have/carry a socket and bits, but still handy to some I'm sure :tu:
Ii had one in my altoid tin of bits in my pocket so gave it a go,works ok a little wiggly but does the job :tu: i also like the build of this mt,its basic but has what i generally need, the wire stripper came in handy re-wiring a new light fitting :salute:
-
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out :tu:
Did you put it through any hard use? Just curious as I know the quality/durability factor seemed to be an issue for some. I don't really ever get to test my MTs to the limit so to speak, so it's hard for me to make any claims about quality/durability from first hand experience.
I would say i used it as hard as any dedicated tool,i did fold up the phillips today but no locks so this happens, the wirecutters cut coat hanger gauge tubing ok but not so well on some thicker electrical wires but ok on thinner,the blade is smooth and nice shape and sharp,a bit of up and down wiggle but nothing ill stress about,again a mt saves me from going back and forth to my tool bag,a 1/4 socket fits the phillips so you could use other bits :tu:
Nice. I didn't know about the socket trick though. Not that I ever have/carry a socket and bits, but still handy to some I'm sure :tu:
Ii had one in my altoid tin of bits in my pocket so gave it a go,works ok a little wiggly but does the job :tu: i also like the build of this mt,its basic but has what i generally need, the wire stripper came in handy re-wiring a new light fitting :salute:
That's part of why I like it-it's a bit basic in comparison to many MTs. It has the basic things most people would commonly need (maybe not the little file/ruler, although it does have a flathead at the end) without a bunch of tools that many are less likely to need often. While I prefer to have a file and saw on my MTs, I can't honestly say I need them often enough to worry about it. I do like to have a nailfile if possible though (not that I use one daily, but it's nice to have when needed), and the diamond file works well for that, but the regular files not so much. As I stated when I first got my Wingman, it's practically ideal for my normal usage, and would be even more so if there was a diamond file on the other side of that little file. The spring loaded pliers really are a big factor, despite the fact that I really don't use them much. I just really like using them when I need to though, and that feature really helps make them easier to use :tu:
-
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out :tu:
Did you put it through any hard use? Just curious as I know the quality/durability factor seemed to be an issue for some. I don't really ever get to test my MTs to the limit so to speak, so it's hard for me to make any claims about quality/durability from first hand experience.
I would say i used it as hard as any dedicated tool,i did fold up the phillips today but no locks so this happens, the wirecutters cut coat hanger gauge tubing ok but not so well on some thicker electrical wires but ok on thinner,the blade is smooth and nice shape and sharp,a bit of up and down wiggle but nothing ill stress about,again a mt saves me from going back and forth to my tool bag,a 1/4 socket fits the phillips so you could use other bits :tu:
Nice. I didn't know about the socket trick though. Not that I ever have/carry a socket and bits, but still handy to some I'm sure :tu:
Ii had one in my altoid tin of bits in my pocket so gave it a go,works ok a little wiggly but does the job :tu: i also like the build of this mt,its basic but has what i generally need, the wire stripper came in handy re-wiring a new light fitting :salute:
That's part of why I like it-it's a bit basic in comparison to many MTs. It has the basic things most people would commonly need (maybe not the little file/ruler, although it does have a flathead at the end) without a bunch of tools that many are less likely to need often. While I prefer to have a file and saw on my MTs, I can't honestly say I need them often enough to worry about it. I do like to have a nailfile if possible though (not that I use one daily, but it's nice to have when needed), and the diamond file works well for that, but the regular files not so much. As I stated when I first got my Wingman, it's practically ideal for my normal usage, and would be even more so if there was a diamond file on the other side of that little file. The spring loaded pliers really are a big factor, despite the fact that I really don't use them much. I just really like using them when I need to though, and that feature really helps make them easier to use :tu:
I cant see me using the ruler much but then i dont use the one on my surge and that option not on the older wave, the small flathead is usefull,file not so great but hey not all mt's are perfect :rofl:
-
Just picked up a TTI, with bit kit and extender. Incredible tool. I've opened a couple
of bubble wrap pks. with the package opener and been tightening some knobs on kitchen
cabinets. My EDC was a Wave. I forget when I purchased it(15-20 yrs ago), but I figured I'd treat myself to an upgrade. My next Leatherman was going to be a Surge, but the more I read about
it, I knew that I had to have a TTI. The Surge may be next.
-
@ Rusty the wave and TTi are excellent tools as im sure the Surge is as well. I used my TTI for a while but i didn't care for the cap crimper plier head on mine so i went back to the wave.
:ahhh my new acquisition just arrived and yes another PST and yes its the Japanese PST no less. I now have triplets with this particular one being the best example thus far in my collection.
-
@ Rusty the wave and TTi are excellent tools as im sure the Surge is as well. I used my TTI for a while but i didn't care for the cap crimper plier head on mine so i went back to the wave.
:ahhh my new acquisition just arrived and yes another PST and yes its the Japanese PST no less. I now have triplets with this particular one being the best example thus far in my collection.
Very nice Aloha :tu: I think you should share, you know it's not nice to share....... :whistle: :rofl:
-
one of these has a 2 broken parts and the other has a weird grind on the main blade. it would be wrong to send poorly working tools to memebers :whistle: so ill have to hang on to them for uh umm safe keeping haha. this one im happy to report is in great condition with all tools in tact and the main blade pretty sharp. my PST collection is steadily growing and while i know there are many version out there i keep my eye on the Japan stamped riveted ones.
-
Nice PSTs Aloha. :tu: You just need the hollow rivet PST now, that one seems pretty hard to find.
-
Nice PSTs Aloha. :tu: You just need the hollow rivet PST now, that one seems pretty hard to find.
i know and believe me when i say I HAVE BEEN LOOKING :dd: they are either very expensive or unicorns.
-
one of these has a 2 broken parts and the other has a weird grind on the main blade. it would be wrong to send poorly working tools to memebers :whistle: so ill have to hang on to them for uh umm safe keeping haha. this one im happy to report is in great condition with all tools in tact and the main blade pretty sharp. my PST collection is steadily growing and while i know there are many version out there i keep my eye on the Japan stamped riveted ones.
We could do a broken tool trade :think: :rofl:
-
one of these has a 2 broken parts and the other has a weird grind on the main blade. it would be wrong to send poorly working tools to memebers :whistle: so ill have to hang on to them for uh umm safe keeping haha. this one im happy to report is in great condition with all tools in tact and the main blade pretty sharp. my PST collection is steadily growing and while i know there are many version out there i keep my eye on the Japan stamped riveted ones.
We could do a broken tool trade :think: :rofl:
:rofl: just the thought is funny. can u imagine? i guess for the collector that has everything.
-
:rofl: just the thought is funny. can u imagine? i guess for the collector that has everything.
Exactly!¡! :D
-
Nice PSTs Aloha. :tu: You just need the hollow rivet PST now, that one seems pretty hard to find.
i know and believe me when i say I HAVE BEEN LOOKING :dd: they are either very expensive or unicorns.
And even when you do find one on eBay you will have to contend with all the other MTO'ers also trying to get one for their PST collection ..... :pok: :twak: ;) (unless you get lucky enough to find one at your famous flea-markets :tu: )
-
And even when you do find one on eBay you will have to contend with all the other MTO'ers also trying to get one for their PST collection ..... :pok: :twak: ;) (unless you get lucky enough to find one at your famous flea-markets :tu: )
I think you just hit his Staples Easy Button Greg :think: :rofl:
-
My Leatherman Mini Tool BO with Nylon sheath arrived today and like you can see it is in mint condition. :cool: All blades look unused... except for the wire cutter! :rolleyes: The wire cutter seems to have seen some serious use and is heavily worn down. The edge is gone and the cutter is nearly flat now but still does its job well (only tried it with some paper clips yet). I guess the preowner tried to cut something to hard, the wire cutter edge chipped and he filed it down. It is a bit annoying since the rest of the tool is like new. However I barely use the wire cutter and it still works with cable and unhardened wire (most probably even with hardened wire) so I try not to think to much about this flaw. ;)
Maybe I can find a second more used and cheaper one with intact pliers anywhere and exchange them then... ::)
(http://img.photobucket.com/albums/v601/Veetec/Foto1_zpse688f81e.jpg) (http://smg.photobucket.com/user/Veetec/media/Foto1_zpse688f81e.jpg.html)
(http://img.photobucket.com/albums/v601/Veetec/Foto2_zps049188e4.jpg) (http://smg.photobucket.com/user/Veetec/media/Foto2_zps049188e4.jpg.html)
(http://img.photobucket.com/albums/v601/Veetec/Foto3_zpsb87e3be1.jpg) (http://smg.photobucket.com/user/Veetec/media/Foto3_zpsb87e3be1.jpg.html)
(http://img.photobucket.com/albums/v601/Veetec/Foto4_zps04440d04.jpg) (http://smg.photobucket.com/user/Veetec/media/Foto4_zps04440d04.jpg.html)
(http://img.photobucket.com/albums/v601/Veetec/Foto5_zps281ba23e.jpg) (http://smg.photobucket.com/user/Veetec/media/Foto5_zps281ba23e.jpg.html)
(http://img.photobucket.com/albums/v601/Veetec/Foto6_zps0f8da89d.jpg) (http://smg.photobucket.com/user/Veetec/media/Foto6_zps0f8da89d.jpg.html)
-
Nice PSTs Aloha :tu: Nice Mini Dr. Bahn :tu: You two make me want more PSTs, and I am also thinking about getting a Mini eventually. I think the Mini would be a great, easily carried plier tool for those times when I don't really need a full size MT and really just want to have pliers available to compliment a SAK or, in particular, the OHMasterRT.
-
@theDoc
That black thing doesn't fit in your collection of those shiny nice tools at all. :-\ Better give it to someone with a thing for black. :whistle:
An early Christmas present of sorts. ;)
-
@greg and stealth007
it would be awesome to find a Japanese PST at my local fm. i will be patient and watch the bay and one will pop up im sure, i hope, maybe.
@DrBahn
that is great mini i wonder what the heck they were trying to cut :think:. im sure you can get it sorted out tho.
@monrogue
the mini would be a great carry for you especially with you complimenting it with a full feature SAK and blade.
-
@monrogue
the mini would be a great carry for you especially with you complimenting it with a full feature SAK and blade.
Right. I figure it would be good to carry with a SAK like the Champion Plus (if I end up getting one that is) or one of my other SAKs and the OHMasterRT. All I'd really be missing is pliers, and maybe a saw, but the saw doesn't concern me much as I rarely use it. They're awful tempting, but seem to be hard to come by, especially for a reasonable price.
-
@monrogue
the mini would be a great carry for you especially with you complimenting it with a full feature SAK and blade.
Right. I figure it would be good to carry with a SAK like the Champion Plus (if I end up getting one that is) or one of my other SAKs and the OHMasterRT. All I'd really be missing is pliers, and maybe a saw, but the saw doesn't concern me much as I rarely use it. They're awful tempting, but seem to be hard to come by, especially for a reasonable price.
there have been a lot of auctions lately on some great ones. i almost bit on a few but my mind was elsewhere and my funds are earmarked for Japanese PSTs :tu:
-
Thanks a lot my friends! :cheers: I am really happy about the BO Mini except of this "cutter-issue". But like I wrote before, it still does its job and I barely use it anyway. Plus the BO Mini is more a collectors item to me than an user. I have got 2 ss Minis to use. ;)
@Monrogue: Like Aloha wrote before, I also think a Mini Tool would be good to carry together with a SAK of some kind. Are they that expensive used in the US? Here in Germany they are frequently sold for about $ 30-60. ???
@enki: "...all those shiny tools.."? Unfortunately for you my black mt collection is growing every month. The BO Mini is my sixth BO mt plus I have got 3 black Alox Vics. :multi: So it actually feels quite familiar here. Sorry! :D
@Aloha: I would like to know how the preowner commited this crime on the poor Mini, too. :think:
-
@Monrogue: Like Aloha wrote before, I also think a Mini Tool would be good to carry together with a SAK of some kind. Are they that expensive used in the US? Here in Germany they are frequently sold for about $ 30-60. ???
I haven't checked in a little while, but whenever I have, there really weren't many available at all. I prefer the "buy it now" option so I don't have to wait days or even weeks in some cases, for the auction to end, especially when I don't even know if I'm going to end up with it. I'd rather pay a little more just to know I'll be getting it soon. I'm impatient like that unfortunately. I may have to go that route though, depending on what I find.
-
I haven't checked in a little while, but whenever I have, there really weren't many available at all. I prefer the "buy it now" option so I don't have to wait days or even weeks in some cases, for the auction to end, especially when I don't even know if I'm going to end up with it. I'd rather pay a little more just to know I'll be getting it soon. I'm impatient like that unfortunately. I may have to go that route though, depending on what I find.
I know what you are talking about. I am also really impatient when I have ordered something cool. :D The auction of the BO Mini had the "buy it now" option so I have hit the button immediately.
-
Nice BO Mini Doc! One of my all time favorite Leathermans. :tu:
-
thanks to gregozdobe i believe who said if there is a buy it now option go for it. i also do the same when that option is avail.
@DrBahn i know these are full size plier in a small package but even full size plier have limits when cutting. that was tool abuse and glad these are in a more loving home.
-
Nice BO Mini Doc! One of my all time favorite Leathermans. :tu:
Thank you! It is one of my favorite LM, too. :)
@Aloha: Be sure that I will give the Mini a nice and loving home. :)
-
NOS Micra. USA stamped scissors. :tu:
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%204/DSC00977_zps6d88b744.jpg)
-
NOS Micra. USA stamped scissors. :tu:
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%204/DSC00977_zps6d88b744.jpg)
Which year was this package being released?
-
Nice Micra Capt. :tu:
-
Nice Micra Capt. :tu:
+1 :tu:
-
NOS Micra. USA stamped scissors. :tu:
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%204/DSC00977_zps6d88b744.jpg)
Which year was this package being released?
Just checked and it says 1998.
-
Nice find, captain! Are you going to open it? :tu:
-
Nice find, captain! Are you going to open it? :tu:
Not a chance in hell. >:D
-
Nice find, captain! Are you going to open it? :tu:
Not a chance in hell. >:D
Good decision! :tu: I know I couldn´t resist... :facepalm:
-
Nice find, captain! Are you going to open it? :tu:
Not a chance in hell. >:D
Good decision! :tu: I know I couldn´t resist... :facepalm:
Me either :ahhh
-
Nice find, captain! Are you going to open it? :tu:
Not a chance in hell. >:D
Come on... open it :pok: Mine were supposed to stay in the package too :D
-
Nice find, captain! Are you going to open it? :tu:
Not a chance in hell. >:D
Come on... open it :pok: Mine were support to stay in the package too :D
:o :o :o
Your a braver man than I. :D
-
I wouldn't open it ...
-
I couldn't leave any in the package. I want to play with them...but I probably wouldn't use a gem too extensively.
Sent from my XT901 using Tapatalk
-
I couldn't leave any in the package. I want to play with them...but I probably wouldn't use a gem too extensively.
Sent from my XT901 using Tapatalk
What's the point of opening this one if you already have another?
-
Oh if I had duplicates I could possibly leave one in package. I have no duplicates though.
Sent from my XT901 using Tapatalk
-
Oh if I had duplicates I could possibly leave one in package. I have no duplicates though.
Sent from my XT901 using Tapatalk
The whole point of MT.O is getting duplicates! :twak:
-
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%204/DSC01005_zps03afccf6.jpg)
-
Cool picture of your camo Fuse there Capt! Is that a CC model?
-
Cool picture of your camo Fuse there Capt! Is that a CC model?
Nope not the CC model. I do have a CC Fuse but it is a SS version.
-
Oh if I had duplicates I could possibly leave one in package. I have no duplicates though.
Sent from my XT901 using Tapatalk
The whole point of MT.O is getting duplicates! :twak:
That's the one thing I haven't done since being a member here...until now >:D You get a duplicate of this :twak: :twak:
-
That's the one thing I haven't done since being a member here...until now >:D You get a duplicate of this :twak: :twak:
That was an awesome duplicate there Kyle!¡! :rofl:
I don't have duplicates of my MTs either. I only have singles of every MT that I own. I doubt I could get by without opening any MT even if I did have duplicates :think:
-
:mail: :cheers:
Sidekick
(http://i1161.photobucket.com/albums/q520/mc_chouffe/D6DFE72B-AE9B-46A8-9883-BA92B3725191-1847-000002D6D430B0F3_zpsf98c317e.jpg)
Micra and Carabiner
(http://i1161.photobucket.com/albums/q520/mc_chouffe/96E664EB-2142-4475-8942-70B74D1AE46B-1847-000002D6DB09C4B1_zps9a0c88c7.jpg)
-
That's the one thing I haven't done since being a member here...until now >:D You get a duplicate of this :twak: :twak:
That was an awesome duplicate there Kyle!¡! :rofl:
I don't have duplicates of my MTs either. I only have singles of every MT that I own. I doubt I could get by without opening any MT even if I did have duplicates :think:
Ha, yes it was ;) I know I'd still struggle to resist the temptation to open up even a duplicate. I would want to get my hands on it, not just look at it in the package. I would not be a good collector of any items that should be kept in packages ::)
-
I got a ST 300/Micra combo set last week, haven't used it much but the tool itself is a monster. I have no doubt it would tackle anything my juice or ave couldn't handle. It ride in the molle pouch attached to my Maxped Jumbo I take everywhere.
(http://i161.photobucket.com/albums/t228/mtngoat13/2013-11-06131901.jpg) (http://s161.photobucket.com/user/mtngoat13/media/2013-11-06131901.jpg.html)
Family Pics
(http://i161.photobucket.com/albums/t228/mtngoat13/2013-11-06132607.jpg) (http://s161.photobucket.com/user/mtngoat13/media/2013-11-06132607.jpg.html)
(http://i161.photobucket.com/albums/t228/mtngoat13/2013-11-06132613.jpg) (http://s161.photobucket.com/user/mtngoat13/media/2013-11-06132613.jpg.html)
(http://i161.photobucket.com/albums/t228/mtngoat13/2013-11-06132620.jpg) (http://s161.photobucket.com/user/mtngoat13/media/2013-11-06132620.jpg.html)
-
My most recent MT purchase is a Wingman, I know it is not as high end as my supertool 300 but I prefer it, I gotta say the spring loaded pliers, the smaller size and pocket clip make this my most used MT.
-
My most recent MT purchase is a Wingman, I know it is not as high end as my supertool 300 but I prefer it, I gotta say the spring loaded pliers, the smaller size and pocket clip make this my most used MT.
Same here :tu: I've carried mine exclusively (at work anyway) since I got it about a month ago. I've never carried any of my new MTs this long. I usually may carry one for a couple weeks, and then add it to the rotation, but the Wingman has taken over my rotation so far.
-
My most recent is the Style CS. Great little pocket tool that I carry in addition to my regular MT.
-
Squirt PS4, never liked it on paper but when I held it in my hand I loved it :whistle:
This is kind of a first for me, usually its the other way round. I see something on the net, fall in love, then once I hold in my hand it does not live up to the expectation.
-
Squirt PS4, never liked it on paper but when I held it in my hand I loved it :whistle:
This is kind of a first for me, usually its the other way round. I see something on the net, fall in love, then once I hold in my hand it does not live up to the expectation.
It is a great MT! :cheers:
-
I got myself the LM Surge, got it with a great bundle the Surge + Led Lenser P3 + 42 Bit Kit, I bought the Skinth OG for the Rebar/Micra, however it fits the Surge pretty good, but still decided to order another Skinth this time the Plus with the Stainless steel belt clip rather the the belt loop that the OG has, going to give the Rebar and Micra to my wife with the Skinth OG to have in her hand bag.
(http://img203.imageshack.us/img203/4821/nwc7.jpg)
-
I got myself the LM Surge, got it with a great bundle the Surge + Led Lenser P3 + 42 Bit Kit, I bought the Skinth OG for the Rebar/Micra, however it fits the Surge pretty good, but still decided to order another Skinth this time the Plus with the Stainless steel belt clip rather the the belt loop that the OG has, going to give the Rebar and Micra to my wife with the Skinth OG to have in her hand bag.
(http://img203.imageshack.us/img203/4821/nwc7.jpg)
Is that the new style Surge?
-
The good news: Bit Driver Extender and Bit Kit just arrived! :)
The bad news: I can't use them yet as my Skeletool is hiding (probably in my room somewhere). :cry:
-
Hey stealth007s, nay it's the old one, we don't have the new one here in Australia yet.
Sent from my SM-N9005 using Tapatalk
-
Surge 2013 :D
(http://img46.imageshack.us/img46/305/x3pu.jpg) (http://imageshack.us/photo/my-images/46/x3pu.jpg/)
-
Hey stealth007s, nay it's the old one, we don't have the new one here in Australia yet.
Sent from my SM-N9005 using Tapatalk
The special set is only available with the Old Surge.
-
Hey stealth007s, nay it's the old one, we don't have the new one here in Australia yet.
Sent from my SM-N9005 using Tapatalk
Well that sucks!¡! I have been waiting for the new one to show up around my neck of the woods too. I'll get one when I find them here.
-
I picked up a E33Bx today. I'm really impressed by their flipper design, it's pretty sweet.
I don't really care for the grind or that it's a combo blade, I'd prefer a full normal blade. But overall I like it.
-
MINI with Union Pacific rail road safety logo.
-
Nice! I love the Minitool and also love advertising on MT's and SAK's. :tu:
-
Nice! I love the Minitool and also love advertising on MT's and SAK's. :tu:
Not on MTs. :rant:
-
Surge 2013 :D
(http://img46.imageshack.us/img46/305/x3pu.jpg) (http://imageshack.us/photo/my-images/46/x3pu.jpg/)
Nice. :cheers: You seem to be getting the new models in Europe very soon. What's your secret? :D
Also, olight s15? How do you like it?
-
Nice. :cheers: You seem to be getting the new models in Europe very soon. What's your secret? :D
Also, olight s15? How do you like it?
The new model Surge appeared in Poland in sales recently, unless 11.08.2013. I was surprised that he is with us. Torch is actually S15, first impressions very positive.
-
(http://img.tapatalk.com/d/13/11/24/anupa8ym.jpg)(http://img.tapatalk.com/d/13/11/24/qejugeqy.jpg)(http://img.tapatalk.com/d/13/11/24/myberejy.jpg)(http://img.tapatalk.com/d/13/11/24/6arahehu.jpg)
I just bought the Leatherman Charge ALX. Loving it so far!
-
Got a Fuse in the mail yesterday. Like new, got it off eBay for $22.00.
-
Got a PST 01&02 95
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
-
Today was an excellent day for me! Thanks to the wife, I got some very early Christmas gifts!
(http://farm3.staticflickr.com/2815/11024237576_45b4f6707e.jpg)
Can't wait to get these in the rotation!
-
Today was an excellent day for me! Thanks to the wife, I got some very early Christmas gifts!
(http://farm3.staticflickr.com/2815/11024237576_45b4f6707e.jpg)
Can't wait to get these in the rotation!
Nice pressies! You have a good wife! :tu:
-
Nice Christmas gifts.
-AdmSlc
-
Today was an excellent day for me! Thanks to the wife, I got some very early Christmas gifts!
(http://farm3.staticflickr.com/2815/11024237576_45b4f6707e.jpg)
Can't wait to get these in the rotation!
Nice pressies! You have a good wife! :tu:
+1 - Nice early Christmas gifts for sure :tu:
-
(http://img.tapatalk.com/d/13/11/24/anupa8ym.jpg)(http://img.tapatalk.com/d/13/11/24/qejugeqy.jpg)(http://img.tapatalk.com/d/13/11/24/myberejy.jpg)(http://img.tapatalk.com/d/13/11/24/6arahehu.jpg)
I just bought the Leatherman Charge ALX. Loving it so far!
Nice Charge!
sent from Nate's mobile
-
Today was an excellent day for me! Thanks to the wife, I got some very early Christmas gifts!
(http://farm3.staticflickr.com/2815/11024237576_45b4f6707e.jpg)
Can't wait to get these in the rotation!
Now I need to get the ST300. :facepalm:
-
Just got an e33Tx in VGC off eBay last week for $15. Really like it, although I wish it was a straight blade instead of the combo.
-
Thanks everyone! I'm really liking the Rebar thus far. It's actually a little smaller than I imagined. The ST will be tomorrow's carry.
Gotta say, I really like the plier head on the Rebar. Not sure what it is, just really dig it haha
-
Thanks everyone! I'm really liking the Rebar thus far. It's actually a little smaller than I imagined. The ST will be tomorrow's carry.
Gotta say, I really like the plier head on the Rebar. Not sure what it is, just really dig it haha
Yeah, the Rebar is fairly small (I remember thinking the same thing the first time I held mine), especially when you consider all packed into it. Very versatile and functional little package :tu: I too like the plier head.
-
Hello all, I've just got my Leatherman Wave + nylon sheath :tu:
I like a lot the feel of it, and have already used it for minor jobs in the house!
-
Just replaced my Juice S2. I gave my previous one to a friend.
-
I just got in a Sidekick and Croc combo. Interestingly enough, the Sidekick is of the newer handle design.
-
I just got in a Sidekick and Croc combo. Interestingly enough, the Sidekick is of the newer handle design.
In Canada? :o
-
With the help of an American friend. :salute:
-
With the help of an American friend. :salute:
Is there no Home Depot, or do they just not carry it in Canada?
-
There is...but like everything else...including Wal-Mart, Canadian stores carry different stock from their parent American stores.
-
They've got that Sidekick/Croc combo at my local Home Depot, but I'm waiting to see if it goes on sale after Christmas. I snagged the Wingman/Style combo last year at $15, and hope for maybe the same thing this time around.
-
With the help of an American friend. :salute:
:poh:
-
Was just given a Micra. Nice little tool.
-
i found a rebar at a hardware store with which to mod my wave.
i'm gonna need another skinth, now.
-
I picked up the Sidekick/Croc combo pack yesterday.
I certainly like the Sidekick's plain edge compared to the Wingman's combo edge. As I wasn't a hge fan of the Wingman's scissors, I'm just as happy to have the saw, and the short serrated edge blade is probably just as useful in reality to me as the Wingman's package opener. So, overall, I think I like it more than the Wingman.
-
I picked up the Sidekick/Croc combo pack yesterday.
I certainly like the Sidekick's plain edge compared to the Wingman's combo edge. As I wasn't a hge fan of the Wingman's scissors, I'm just as happy to have the saw, and the short serrated edge blade is probably just as useful in reality to me as the Wingman's package opener. So, overall, I think I like it more than the Wingman.
I share the same thoughts (with the exception of the Wingman's scissors-I don't mind them), especially regarding the package opener vs. the serrated blade. I figure the little serrated blade would work fairly well as a package opener, and be useful for other cutting tasks that the package opener would not. I too would prefer the full PE blade to the combo blade of the Wingman. While I prefer scissors to a saw, I don't really need scissors on the MT as I carry a SAK with scissors. I don't really need a saw, but I like to have one on my MT just in case. So basically what I'm saying is that I want a Sidekick and would probably prefer it overall to the Wingman now that I've thought about it. That's how it tends to work around here though >:D
-
I went down the wingman sidekick road, they are fun at first but that wears off quickly and you will find yourself going for the Rebar or wave, something of higher quality.
-
I think that really depends on what you use them for. I have a Spirit X, and had a Wave, and find both to be more than I'll really ever need. For the light/medium duty stuff I do, I think the Wingman/Sidekick are nearly perfect.
Also, I just won a Wingman from Aloha007's give-away! Wohoo! Now, I will have a Wingman AND a sidekick.
One other thing about this platform. Their cost means I'm a LOT more likely to get one for someone as an entry level tool. They may not stick with it, and that's fine, but it's a good starter. In fact, it's a GREAT starter. I've given away 2 Wingmans so far.
-
First of today's joy packages was the Farmman/TaxiDad inspired XE6 Juice!
At only £66 I really couldn't say no!
-
don't blame me ! (who knows where that could end :o )
-
I just got my Wingman in the mail today and I love it! The first thing I did was test the scissors and they're not that bad at all. I love this tool, it's awesome! :cheers:
-
don't blame me ! (who knows where that could end :o )
I will so blame you!
It was you who lent me one for a road test :pok:
-
I picked up a LM ST300 a couple weeks back. The thing is a bit of a hog, but sure seems to be built to last. I may end up with a Rebar as it is a smaller tool and will be easier to carry.
I am still partial for tools that you need to open to get to the tools. The Wave I used to carry seemed to always collect dirt and lint. By older styled tools did not seem to do this.
-
I just got my Wingman in the mail today and I love it! The first thing I did was test the scissors and they're not that bad at all. I love this tool, it's awesome! :cheers:
Glad you like it! :cheers:
-
I think that really depends on what you use them for. I have a Spirit X, and had a Wave, and find both to be more than I'll really ever need. For the light/medium duty stuff I do, I think the Wingman/Sidekick are nearly perfect.
Also, I just won a Wingman from Aloha007's give-away! Wohoo! Now, I will have a Wingman AND a sidekick.
One other thing about this platform. Their cost means I'm a LOT more likely to get one for someone as an entry level tool. They may not stick with it, and that's fine, but it's a good starter. In fact, it's a GREAT starter. I've given away 2 Wingmans so far.
Congrats on the wingman, glad you like it.
Swiss Army knives .
-
I just got my Wingman in the mail today and I love it! The first thing I did was test the scissors and they're not that bad at all. I love this tool, it's awesome! :cheers:
Nice, glad you like it man :tu: I assume everything QC related is in order?
I should clarify my comments earlier about possibly preferring the Sidekick. That would apply as long as it's part of a combo with a SAK with scissors. If it came down to me only being able to carry either the Wingman or Sidekick as a standalone tool, I would go with the Wingman due to the fact it has scissors. I would need scissors far more often than a saw.
Still want to get a Sidekick though. I'm debating sneaking one into an Amazon order the wife has going for some Christmas stuff >:D I wouldn't be as hesitant as I am if I hadn't just received a new PS3 as my Christmas gift early ;)
-
I just got my Wingman in the mail today and I love it! The first thing I did was test the scissors and they're not that bad at all. I love this tool, it's awesome! :cheers:
Nice, glad you like it man :tu: I assume everything QC related is in order?
I should clarify my comments earlier about possibly preferring the Sidekick. That would apply as long as it's part of a combo with a SAK with scissors. If it came down to me only being able to carry either the Wingman or Sidekick as a standalone tool, I would go with the Wingman due to the fact it has scissors. I would need scissors far more often than a saw.
Still want to get a Sidekick though. I'm debating sneaking one into an Amazon order the wife has going for some Christmas stuff >:D I wouldn't be as hesitant as I am if I hadn't just received a new PS3 as my Christmas gift early ;)
Home Depot has them with a croc.
Swiss Army knives .
-
I just got my Wingman in the mail today and I love it! The first thing I did was test the scissors and they're not that bad at all. I love this tool, it's awesome! :cheers:
Nice, glad you like it man :tu: I assume everything QC related is in order?
I should clarify my comments earlier about possibly preferring the Sidekick. That would apply as long as it's part of a combo with a SAK with scissors. If it came down to me only being able to carry either the Wingman or Sidekick as a standalone tool, I would go with the Wingman due to the fact it has scissors. I would need scissors far more often than a saw.
Still want to get a Sidekick though. I'm debating sneaking one into an Amazon order the wife has going for some Christmas stuff >:D I wouldn't be as hesitant as I am if I hadn't just received a new PS3 as my Christmas gift early ;)
Home Depot has them with a croc.
Swiss Army knives .
I thought about that, but I don't care about the Croc, and the nearest Home Depot is about an hour away. Of course I could order it online, but I would just go with Amazon on that. I've on the 30 day free trial of Amazon Prime, so I would get free 2 day shipping :D
-
I finally got a wave and bit extender.
For years I was good with my ST300, but since I found MTO a SpiritX and Crunch showed up. I'm managing to convince myself that the Rebar is too similar to my ST300 to justify but....
Hello, my name is John and I have a problem :facepalm:
-
I finally got a wave and bit extender.
For years I was good with my ST300, but since I found MTO a SpiritX and Crunch showed up. I'm managing to convince myself that the Rebar is too similar to my ST300 to justify but....
Hello, my name is John and I have a problem :facepalm:
Yes I see your problem, you don't own a Swisstool, no Charge TTi, no Squirt, no Micra, [insert complete MT list here]!!!
-
How did I miss that? I do need a Swisstool!
At what point does the delusion that I am not "Collecting" clear up?
-
How did I miss that? I do need a Swisstool!
At what point does the delusion that I am not "Collecting" clear up?
For some of us....never >:D :whistle:
-
How did I miss that? I do need a Swisstool!
At what point does the delusion that I am not "Collecting" clear up?
Clear up?¿? :rofl:
-
At what point does the delusion that I am not "Collecting" clear up?
Some people seem to be able maintain this particular self-deception indefinitely ;) , but for me it "cleared up" when I realized I was buying MTs that I knew (before I decided to buy) I had absolutely no intention of ever actually using :D
That was some time ago, and my collection continues to grow today. It has slowed down a bit lately, the main reason being that I am having difficulty finding the particular MTs I want for sale/trade. I think they are mostly in the hands of other collectors who seem to want to hang on to them. I guess that is why these people are called "collectors", not "catch and releasers" :rofl:
And while I'm on that subject, if anyone has any of the following they are willing to sell/trade please PM me:
Original LM PSTs (Cabela's or Early Winters catalogues)
LM PST with hollow knurled screws
LM Mini "cleanskin" (no stampings on handle)
LM ST 200 SS with CC pliers
LM Vista
yellow, blue or tan Gerber Multi-Locks (MP600's)
Gerber MP650 evolution (military)
Sheffield "Crocodile" Kershaw A100 copy (straight jaws, OHO knife)
TiNi SOG CrossCut
-
I'm waiting on a Gerber grappler and a blue leatherman ps4.
-
My latest is a Super Tool BO cap crimper! A little maintenance done and now it's almost as good as new.
-
My brother with his new Rebar his son got him for his birthday. :)
-
i found a rebar in a local hardware store most recently and swapped the head into my wave. sooooo happy with the results. going to attempt to grind a package opener blade like on a wingman, will use the pry bar of course.
-
My brother with his new Rebar his son got him for his birthday. :)
When will he be joining MTO? :D
-
Arrived today from Antonio
(http://img.tapatalk.com/d/13/12/09/5a7u9aty.jpg)
-
My brother with his new Rebar his son got him for his birthday. :)
When will he be joining MTO? :D
That is a good question? He's not much of a forum person. But who know maybe some day. :)
-
Arrived today from Antonio
(http://img.tapatalk.com/d/13/12/09/5a7u9aty.jpg)
The MiniTool is a real beauty. :drool:
-
Yes it is, I was after one years ago but ended up the the original Wave. I'm really happy I finally got one
-
Got a pretty large order of multitools from eBay today.
Spirit, Swisstool, B-O Powerlock, Blue Squirt PS4 and Green plastic-encased Micra.
Question:
Are the plastic micra's the same as the regular ones? or is the steel casing thinner than the ones that dont come with plastic shells? I might break the green plastic off, as i dont like how the casing rattles and flexes around the steel frame.
-
I have a Juice KF4 and ST300 on the way from a trade.
-
Nice trade I'd say Lynn (depending on what you gave up for them ;)). Still, a KF4 isn't always easy to come by, and it's a good Juice. I just wish it had scissors instead of the serrated blade, then it would have everything covered (well except an opener tool, but not as big of a deal as scissors).
As for me, I'm expecting my new Sidekick sometime today via UPS. The tracking originally stated Wednesday, but now it's saying early delivery today :D I hope that is the case. Then I'll have both the Sidekick and Wingman on me at work today. Siblings united ;)
-
I have a new ST300 on its way from a great Fleabay find! :)
-
Nice trade I'd say Lynn (depending on what you gave up for them ;)).
I traded my iPhone 3GS. It sat in the trade section since March. I'm happy to see it go to someone who'll get some use out of it.
-
Nice trade I'd say Lynn (depending on what you gave up for them ;)).
I traded my iPhone 3GS. It sat in the trade section since March. I'm happy to see it go to someone who'll get some use out of it.
Good trade then, especially if you didn't get much use out of it.
My Sidekick has arrived, and I have taken pics, but can't post them right now. Will do so later tonight.
-
Nice trade I'd say Lynn (depending on what you gave up for them ;)).
I traded my iPhone 3GS. It sat in the trade section since March. I'm happy to see it go to someone who'll get some use out of it.
You swapped an iPhone for a ST300 and a KF4?
Gee,reckon you got the right end of that deal!
-
Here's my new Sidekick :D
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20131210_153324_482_zpse3e6c929.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20131210_153324_482_zpse3e6c929.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20131210_153430_189_zpsf4433962.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20131210_153430_189_zpsf4433962.jpg.html)
This blade is very sharp
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20131210_153458_049_zpsfde8f377.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20131210_153458_049_zpsfde8f377.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20131210_153538_323_zps09ddd990.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20131210_153538_323_zps09ddd990.jpg.html)
-
Finally found myself a Leatherman Juice KF4, or rather I should say Tosh found it for me. :cheers:
(http://img.tapatalk.com/d/13/12/12/asyta7as.jpg)
It just bit me on the knuckle when I tried to open the screwdrivers. I feel particularly stupid because I'd been warned.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
-
Finally found myself a Leatherman Juice KF4, or rather I should say Tosh found it for me. :cheers:
(http://img.tapatalk.com/d/13/12/12/asyta7as.jpg)
It just bit me on the knuckle when I tried to open the screwdrivers. I feel particularly stupid because I'd been warned.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Still a sweet looking tool there :tu:
-
That's a nice KF4 Spatha :tu: The drivers on mine don't do the biting knuckle thing though, but they're all different in regards to that issue.
-
I love the juice, I don't love the prices :(
-
They're here, they're here!! :mail:
(http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1590_zps1d7b5123.jpg)
The KF4 is in very slightly used condition. The Supertool looks virtually new.
I love the Supertool 300. I have ABSOLUTELY no practical need for it. :rofl: I'ts a monster of a tool, and seems like it could handle any punishment I'd be able to dish out.
I am eyeing the KF4 HARD as my secondary carry tool. I like the size and mass of the juice line. I really like the tool combination on this tool. I liked the S2 as well, but I really don't care for the scissors, and already carry a SOG Crosscut. Also, some of you may know my preference for very VISIBLE tools, and that solar yellow certainly qualifies.
I'm digging both. :tu:
-
Nice ones Lynn :tu: The KF4 I got was in the same very slightly used, great condition. I do agree that the Juice scissors aren't the best, but I'd still prefer to have them in place of the serrated blade, just to make the KF4 a more complete standalone carry package. Not that I often carry only one item, but it would be handy during the summer when I usually am only carrying one item outside of work.
-
Got my ST 300 yesterday. It is a BEAST! I know this will withstand anything I put it through. It resides on my workbench. After a little lubrication it is ready for work!
-
It's going to be a black PS4 :)
-
Got my Squirt PS4 today :D I like it so far. Initially I planned on it going on my keychain once the newness wore off, but now I'm not so sure. I like it as a compliment to my EDC, so it may become a part of that. Time will tell since I've only had it a few hours.
I like that it has the outside accessible tools so that I can use the small blade at work when I'm around others (office setting). It would pair well with my Yeochamp since it has no small blade (combo opener instead). The little scissors will be great for whisker trimming, and better than the 91mm SAK scissors as those are sometimes too big, depending on the angle of trimming. I like the little spring loaded pliers too. This would give me a second set of pliers for those (admittedly rare for me) times when that is necessary. The drivers seem decent, but I honestly wouldn't be reaching for this tool as a first choice should I need a driver. I do wish the file was a nailfile rather than a wood/metal file as it seems an odd choice on such a small MT. While the finer side does seem to work decently as a nailfile, I wouldn't be using such a tiny, easily bent/broken file on wood/metal. I'd be reaching for either my full size MT or SAK for that.
Overall, I'm pleased with it, and could see myself carrying it as part of me EDC lineup over the Micra or Executive (both tools I own). I think the Micra will go on my keychain, which it's well suited for anyway with the tools all protected on the inside. Anyway, enough of my rambling...here are the pics :D
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20131217_162521_703_zpsd8ba28d4.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20131217_162521_703_zpsd8ba28d4.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20131217_162626_196_zps534d4d15.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20131217_162626_196_zps534d4d15.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20131217_162710_770_zpsb630591b.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20131217_162710_770_zpsb630591b.jpg.html)
-
Ive got a PST coming, it is all apart, owner said one of the screws is almost stripped. Anybody know where I can locate a set of screws for it, or what will work in its place?
-
I found a brand new crunch date stamped 0799 at a local gun shop.The shop keeper said he'd had it for years.I gave him £50 for it which I through was a good deal.
-
I found a brand new crunch date stamped 0799 at a local gun shop.The shop keeper said he'd had it for years.I gave him £50 for it which I through was a good deal.
Your not kidding!
-
Got my Squirt PS4 today...
You're on quite the LM kick lately. I like it, and I'm jealous!! :D
-
Got my Squirt PS4 today...
You're on quite the LM kick lately. I like it, and I'm jealous!! :D
:pok: Not a Kick,a Squirt!
-
I received another Juice XE6 a couple of says ago (my second one). First time I had to use Amazons excellent customer service to find one that was any good. Looks like this one is going back for a swap as well :rant:
The drivers are actually nice and free on this one, and the pliers are just the right tension that should loosen a little with use - but the scissors are way too loose and just jam up on the spring when trying to operate them :facepalm:
-
Got my Squirt PS4 today...
You're on quite the LM kick lately. I like it, and I'm jealous!! :D
:pok: Not a Kick,a Squirt!
Hmmm, when you say "quite the Leatherman Squirt", it just doesn't sound........ family rated. :ahhh :rofl:
-
Got my Squirt PS4 today...
You're on quite the LM kick lately. I like it, and I'm jealous!! :D
:pok: Not a Kick,a Squirt!
Hmmm, when you say "quite the Leatherman Squirt", it just doesn't sound........ family rated. :ahhh :rofl:
I know, I have been on a bit of a Leatherman roll (we'll use that term ;)) it seems lately. The Squirt was unexpected and spontaneous as I probably wouldn't have gotten it normally. I'm glad I did though as it's a good little addition to my EDC :tu:
-
No new Leatherman's for me anytime soon. Or any new toys for that matter. I'm still $1800 in the hole for an engagement/wedding set and have to put another grand into my truck..... :facepalm:
-
BO ST200. This tool looks to have been a user but even with the re sharpened blade its in pretty great condition for nearly 10 years old, it's dated 03/04 and 02/04.
-
Nice one Aloha :tu:
-
Nice ST200 Aloha :tu: I think you've been bitten by the collector bug...I see you got a Swisstool as well :pok:
-
Thanks guys :salute:
@Monrogue I am still on the hunt for certain retired LM tools. Swisstools just seem to follow me home :whistle:.
-
Thanks guys :salute:
@Monrogue I am still on the hunt for certain retired LM tools. Swisstools just seem to follow me home :whistle:.
What do you have left that you are trying to track down? And yes, it seems the Swisstools follow you like lost puppies :rofl:
-
Core, Flair, Juice KF4/Pro/SC2 some random others. I try to be pretty frugal so I'm being patient as the prices on some are wacky.
-
Just bought myself a "new" wave to go with my "old" one.
I think I will end up carrying this one for work as the Rebar I bought is not so convenient with its "inside" knife blades and that is probably my most used tool. I have actually relegated the Rebar to my toolbag and pocket carry a Alox Electrician SAK. The Wave will give me the best of both worlds.
Looks to be in good enough condition and was a reasonable price for here "down-under".
I have a almost complete LM bit-kit which I found on a jobsite earlier in the year so it will finally come in handy.
(http://i.ebayimg.com/00/s/MTYwMFgxNjAw/z/nqAAAOxyNo9SrCTQ/$_57.JPG)
The Rebar won't be neglected, it will live in either my Tank-bag on the Ducati or in my Camelback when I'm on the dirtbike.
-
Core, Flair, Juice KF4/Pro/SC2 some random others. I try to be pretty frugal so I'm being patient as the prices on some are wacky.
It sounds like you're trying to "catch 'em all" huh? I haven't really thought about the Core or Flair, nor the SuperTools originally, but I've somewhat had the desire to get at least the original SuperTool, just not sure that I would have much use for it, not that it should matter right ;) And of course I've wanted an original Wave as well, although my desire for it seems to have subsided. I think that's pretty much it for me as I have the PST, PSTII and Juice KF4.
-
Im not so sure where my collecting is headed. I thought the Japanese PST would be the hardest to obtain as well as the Sideclip, at least for the price I willing to pay. It's more about the hunt for a great deal or stumbling upon a tool that excites me. The 3 tools that see use are my Wave, Swisstool Standard w/98' head, and Spirit. The others are tucked away and get poked and prodded weekly but unlike my initial feelings on MTs they wont see any use.
-
Part of my problem is that I feel almost guilty for having some MTs that I intended to use, but do not for whatever reason. Initially with my several week rotation, I managed to fit most of them in, but now I just don't want it to be so complicated, and I'm fairly happy with my Wingman/Sidekick rotation. However, I still feel wrong for not using my Rebar and Spirit as I do really like them. I may have to start the rotation back up between those 4 MTs. The ones I don't normally include in my daily work carry do get carried some in the evenings at home, but those are usually the PST, SOG PPP and Juice KF4.
One thing keeping me from indulging my curiosity about the SuperTool is the fact that I likely wouldn't carry it, but it would be a good vehicle MT. However, in a vehicle, I lose the chance to fiddle with it at home unless I want to actually go and get it from my car, which I wouldn't bother with, and would feel silly doing. I don't know what to do :ahhh I love the build quality of those older LMs, so I really would like to check out a SuperTool and original Wave. Probably someday >:D
-
You know when I first got here I felt very strongly about the tools earning their keep BUT that was before this MT/SAK bug bit :whistle:. I am perfectly fine with the pure enjoyment of having these tools around because I get satisfaction with them in my possession. The only LM that gets used is my Wave as Lynn and Capt both have the Wingmans I owned and Lowtech has the Sidekick. I do have one Wingman but I'll hang on to that. I had 5 Swisstools ( Detron has one ) I use one as a off day carry ( Spirit CS Plus ) and my standard Swisstool Plus I rotate for work. I'm pretty set with what tools I like to carry it seems. I tried the PPP and Paratool but neither hit the right notes for me even tho they are great tools.
The older LMs are something pretty special for sure that's why in my recent giveaway I offered the ST200 up. I had 4 and wanted to share the fun of rocker locks. The old wave is very slim and way cool but I love my new Wave with bits. When I got my TTI I carried that for a bit but when back to my Wave. I will eventually get both Surges and see if the larger "Wave" suits me. This was the tool I initially wanted but went for the Wave instead.
-
I know what you mean. I do get a sense of satisfaction out of owning them. I just feel guilty about not using some of them, mainly the Rebar and Spirit as they're not retired tools and are two of my faves. I'm also curious about the Swisstool, but again, that's one that I don't think I'd carry, but would be really fun to play with. The Spirit is better for me. I guess time will tell what I get. My mind is always going on this stuff, and that usually leads to me getting more MTs :whistle:
-
Not using them is what lead to my thread on what I carry on my off day. I was not using the tools I was carrying and stopped bringing them and sure enough I'd need something. I have rationalized having them on me and not needing them is better than the other way around. Your past sale went very well so if and when you decide to get some tools to try then decide they need new homes I'm sure they will go very quickly. The Swisstools I got were all a fraction of the cost vs new, I have 3 Plus models with one being a CS, 1 NIB, 1 rarely if ever used, 1 lightly used, 1 used, 1 Spirit very lightly used.
-
That is true. I could always sell whatever I don't feel I need to keep. I like browsing ebay for the SuperTool and Original Wave, but I have to stay away as it's a tempting place and makes me want to spend money I shouldn't >:D I wish I had the sweet flea markets you have around. That would be a fun time :tu:
-
That is true. I could always sell whatever I don't feel I need to keep. I like browsing ebay for the SuperTool and Original Wave, but I have to stay away as it's a tempting place and makes me want to spend money I shouldn't >:D I wish I had the sweet flea markets you have around. That would be a fun time :tu:
The fleamarket is great but I've really scored on fleabay with last moment snipes.
-
That is true. I could always sell whatever I don't feel I need to keep. I like browsing ebay for the SuperTool and Original Wave, but I have to stay away as it's a tempting place and makes me want to spend money I shouldn't >:D I wish I had the sweet flea markets you have around. That would be a fun time :tu:
The fleamarket is great but I've really scored on fleabay with last moment snipes.
Yes that is right. You're an ebay sniper :salute: I don't think I can play that game though. I prefer the "buy it now" deals as I don't like having to watch an auction for days or even weeks it seems in some cases, just to end up reaching my limit and someone else grabbing it up instead. I'm impatient with getting new items though, so that's part of the problem. If I could tough it out for however long, I'd probably enjoy it some.
-
My latest is another XE6 arrived today, sent as a replacement for one bought a few days ago but with "iffy" scissors. However, this one has stiff pliers, very stiff drivers and almost every tool isn't quite right somehow - so it looks like it is going back as well.
This is my second XE6 and I had to go through a similar excercise last time. They're great when you get a good one but it is getting too much of a gamble to expect a good one first time :rant:
-
The fleamarket is great but I've really scored on fleabay with last moment snipes.
Ain't nothing wrong with a good snipe :tu: :D I've gotten some good deals on snipes................
Speaking of snipes, have you ever hunted one?
-
I picked up a st 300 today and I got a ps4 in the mail. :)
-
I picked up a st 300 today and I got a ps4 in the mail. :)
Nice :tu: What are your first impressions?
-
The fleamarket is great but I've really scored on fleabay with last moment snipes.
Ain't nothing wrong with a good snipe :tu: :D I've gotten some good deals on snipes................
Speaking of snipes, have you ever hunted one?
Had to look that up. I've never hunted anything and sadly if I had to hunt for food I'd starve :rofl:
-
I picked up a st 300 today and I got a ps4 in the mail. :)
Nice :tu: What are your first impressions?
I like em :)
I got 2 st300 now sliver and black.
the ps4 is alot better than the first ps4 I had. Fit and finish are perfect. :)
-
Just bought an e55b, C304, and e305x LNIB off eBay. Definitely gonna keep the e55b, but not sure about the other two.
-
Just picked up a Super Tool 300 and also grabbed the 19 dollar Home Depot Sidekick and Croc deal. A lot of tool for the money! :tu:
-
I picked up a st 300 today and I got a ps4 in the mail. :)
Nice :tu: What are your first impressions?
I like em :)
I got 2 st300 now sliver and black.
the ps4 is alot better than the first ps4 I had. Fit and finish are perfect. :)
I'm glad you like them and got a good PS4 this time :tu: It is a fun little tool I think.
-
Yay, I just won a new Surge off of eBay. Whew! :cheers:
-
Just got a blue Squirt PS4 for Christmas.
-
Shhh, don't tell Gregozedobe, but I know who got that orange Squirt P4 he was after. :whistle:
(http://img.photobucket.com/albums/v307/jooliesews/Bobbys/LeathermanSquirtP4orange_zps5f72a685.jpg)
-
Oh i really like that Orange P4! :ahhh
-
Shhh, don't tell Gregozedobe, but I know who got that orange Squirt P4 he was after. :whistle:
I just knew it would be another MTo member ! >:(
I hope "whoever" won it enjoys it and it has gone to a good home (but if they ever get bored with it and want to do a "catch and release" I'd like to be first in line ...... :tu: )
-
Shhh, don't tell Gregozedobe, but I know who got that orange Squirt P4 he was after. :whistle:
I just knew it would be another MTo member ! >:(
I hope "whoever" won it enjoys it and it has gone to a good home (but if they ever get bored with it and want to do a "catch and release" I'd like to be first in line ...... :tu: )
I doubt that any multi could escape the super secret vault where that orange P4 now resides. I heard Fort Knox occasionally sends goods they are not sure they could keep securely to "someones" address for safe keeping and it has been rumored that the amount of metal gathered there is starting to affect Earths magnetic poles. ;)
-
My Christmas present :tu: xe6
-
Super Tool 300!
-
Shhh, don't tell Gregozedobe, but I know who got that orange Squirt P4 he was after. :whistle:
(http://img.photobucket.com/albums/v307/jooliesews/Bobbys/LeathermanSquirtP4orange_zps5f72a685.jpg)
I like the look of that a lot. :drool:
-
I'm expecting a BO Rebar to be delivered any time now. I have a stainless one but wanted to give the black a try :D
-
Shhh, don't tell Gregozedobe, but I know who got that orange Squirt P4 he was after. :whistle:
I just knew it would be another MTo member ! >:(
I hope "whoever" won it enjoys it and it has gone to a good home (but if they ever get bored with it and want to do a "catch and release" I'd like to be first in line ...... :tu: )
I doubt that any multi could escape the super secret vault where that orange P4 now resides. I heard Fort Knox occasionally sends goods they are not sure they could keep securely to "someones" address for safe keeping and it has been rumored that the amount of metal gathered there is starting to affect Earths magnetic poles. ;)
Ahh, so it's THAT MTo member ! I've heard there is no longer room for a bed for the "live-in security guard" there are so many tools in the vault these days. Next project is to reinforce the floor to allow for the increased weight :rofl:
Oh well, it is now in good (and colourful) company. :tu:
-
My latest is a MUT. Its missing the wrench but I'm sure I can find one somewhere.
Being a knife packrat, I'm trying to collect the whole Leatherman set. I had just picked up a crunch before that. I love the Crunch and how compact it closes up. Useful little tool.
-
My latest is a MUT. Its missing the wrench but I'm sure I can find one somewhere.
Being a knife packrat, I'm trying to collect the whole Leatherman set. I had just picked up a crunch before that. I love the Crunch and how compact it closes up. Useful little tool.
Welcome to the forum :2tu:
-
My latest is a MUT. Its missing the wrench but I'm sure I can find one somewhere.
Being a knife packrat, I'm trying to collect the whole Leatherman set. I had just picked up a crunch before that. I love the Crunch and how compact it closes up. Useful little tool.
Welcome to the forum :2tu:
Greetings sr! :salute: Replacement MUT wrenches are available on eBay, or even direct from Leatherman. :)
Shhh, don't tell Gregozedobe, but I know who got that orange Squirt P4 he was after. :whistle:
(http://img.photobucket.com/albums/v307/jooliesews/Bobbys/LeathermanSquirtP4orange_zps5f72a685.jpg)
I like the look of that a lot. :drool:
Hey now, don't everybody start "liking" my orange P4! >:( (I think it was an oops that somebody threw a set of Squirt scales into the pot with the orange S2 Juice scales) Leatherman will see all the fuss and and intentionally make a whole run of them, which would make mine less rare! :twak: :D :D
-
My first, got it for x mas. Black wave with driver extension and bits. (http://img.tapatalk.com/d/13/12/28/yqerybu6.jpg)(http://img.tapatalk.com/d/13/12/28/dunyvuzy.jpg)
-
I'm expecting a BO Rebar to be delivered any time now. I have a stainless one but wanted to give the black a try :D
I love my Rebar, but I was a little disappointed in the BO finish. Very dull in spots, very easily scratched, looked like the tool was used, even though it wasn't. I am not an authority on BO finish, maybe it is supposed to be that way. Now I need to buy a Rebar in stainless ;)
-
I'm expecting a BO Rebar to be delivered any time now. I have a stainless one but wanted to give the black a try :D
I love my Rebar, but I was a little disappointed in the BO finish. Very dull in spots, very easily scratched, looked like the tool was used, even though it wasn't. I am not an authority on BO finish, maybe it is supposed to be that way. Now I need to buy a Rebar in stainless ;)
Mine is spot on in finish. Not a scratch out of place, just solid black oxidization :tu: I love it! :cheers:
-
My first, got it for x mas. Black wave with driver extension and bits. ...
Very nice kit. :cheers:
Welcome to the forum. :waving:
-
My first, got it for x mas. Black wave with driver extension and bits. (http://img.tapatalk.com/d/13/12/28/yqerybu6.jpg)(http://img.tapatalk.com/d/13/12/28/dunyvuzy.jpg)
Great setup you got there. :tu:
Welcome to the forum by the way!
-
My first, got it for x mas. Black wave with driver extension and bits. (http://img.tapatalk.com/d/13/12/28/yqerybu6.jpg)(http://img.tapatalk.com/d/13/12/28/dunyvuzy.jpg)
Very good looking present. :)
-
You can't beat a wave, you can practically wire a house with one.
Sent from my SPH-L720 using Tapatalk
-
You can't beat a wave, you can practically wire a house with one.
Sent from my SPH-L720 using Tapatalk
Welcome! :waving: A wave for you and and your wave. It is indeed a very capable tool. Good to see lots of new folk joining MT.o with their new Christmas presents.
:multi:
-
Just got a blue Squirt PS4 for Christmas.
Very nice. :) I hope you'll manage to find the time to give us a full review once you've had the opportunity to use it for a while. You set the bar high with your thorough appraisal of the Dime, so expectations are high. ;) :cheers:
-
Thanks guys. I was so happy to get this bad boy. I've always wanted one, better when it's free. I look forward to using it. I did try and use the bits and the first turn it got twisted.
(http://img.tapatalk.com/d/13/12/29/unujube9.jpg)
Thought that was weird but I love my leatherman now I want a flashlight lol
-
I would contact Leathermans Customer Service about that bit. I would personally be a bit mad if that happened first use.
-
The shooter and thruster are now available on Leathermans website.
-
The shooter and thruster are now available on Leathermans website.
Thank God Now I can get back to surfing.
-
The shooter and thruster are now available on Leathermans website.
Thank God Now I can get back to surfing.
:D
-
The USPS just delivered my New 0404 Charge Ti. What a nice tool. I like it better than the new ones because I do not like cap crimpers.
-
Congrats on a nice acquisition. :cheers:
Hopefully with some pics, maybe in action, soon to follow. :D
-
Got some money for Christmas, so I hit the bay and got a new Kick, slightly used Fuse and PST for a good price. Just waiting on delivery. :mail:
-
The shooter and thruster are now available on Leathermans website.
Thank God Now I can get back to surfing.
Hahahaaa!:D
Sent from my XT901 using Tapatalk
-
Got a Kick and a 95 PST
-
Another PST huh Aloha? :pok: :tu:
-
Another PST huh Aloha? :pok: :tu:
:whistle: it followed me home, what could I do? So I cleaned it up and will give it a good home with its LM brethren.
-
Another PST huh Aloha? :pok: :tu:
:whistle: it followed me home, what could I do? So I cleaned it up and will give it a good home with its LM brethren.
You're a kind man to take in a stray like that :tu: :rofl:
-
Bought a Wingman yesterday and also a Brewzer to go with my Surge (EDC), Micra (EDC) and Rebar (Given to my wife to use).
(http://img.tapatalk.com/d/13/12/30/ny3equha.jpg)
Sent from my GT-N5110 using Tapatalk
-
(http://img14.imageshack.us/img14/2255/2hvx.jpg) (http://imageshack.us/photo/my-images/14/2hvx.jpg/)
LM Squirt Es4 >:D
-
Congrats! I like that picture too :tu:
-
Bought a Skeletool CX today, not too impressed, returned within a few hours.
-
Bought a Skeletool CX today, not too impressed, returned within a few hours.
Dont blame you. I have never been a huge fan of the Skeletool. Its decent but for me there are much better options.
-
Wave only weights a bit more than Skeletool but offers a lot more tools, why not?
OH, picked up a Super Tool 300 + Micra combo for $49...:D
-
Bought a juice C2.
In the past I have owned 2 S2's, 2 CS4's, and a C2 and ended up selling them all off. Not all at the same time. I always end up buying another one in replacement (like this C2) so I think this C2 is the keeper. The size is ideal for pocket carry and Until Leatherman offers another tool in its size I think its going to see a lot of pocket time. If i could turn the can opener into an awl it would just put the icing on the cake. :drool: pretty sure Someone here did that.
-
My Lasted additions are the Leatherman Wingman and Leatherman Brewzer, to go with my LM Rebar, LM Micra and my main EDC LM Surge.
(http://imageshack.com/a/img834/8538/la5c.jpg)
-
Here are my 3 last additions, a Skeletool and a Wenger Swiss Army 70...thanks to bmot for the trade :tu:
The third one is a Juice XE6, a great little Multitool :)
-
I bought a new Wave from a pawn shop yesterday for $30. It doesn't appear to have ever been used at all.
-
Wave only weights a bit more than Skeletool but offers a lot more tools, why not?
OH, picked up a Super Tool 300 + Micra combo for $49...:D
$49??? :ahhh
The pack is $70 in Canada! :ahhh
-
Picked up a Wave today at Wallyworld.
-
I bought a new Wave from a pawn shop yesterday for $30. It doesn't appear to have ever been used at all.
Thats a killer deal. :tu:
-
Picked up a Wave today at Wallyworld.
Wallyworld? Walmart? I thought my friends and I were the only ones that call it that.
-
First ever post here and figure it should be what I got for Christmas. It was a new to me wave and I couldn't be happier.
-
First ever post here and figure it should be what I got for Christmas. It was a new to me wave and I couldn't be happier.
Welcome to the forum ba-ta :cheers:
-
First ever post here and figure it should be what I got for Christmas. It was a new to me wave and I couldn't be happier.
I got the same. First one good thing I'm not the other leather virgin
-
First ever post here and figure it should be what I got for Christmas. It was a new to me wave and I couldn't be happier.
Welcome to the forum ba-ta :cheers:
Thanks, been a lurker for a while now and figured it was time to join in the fun.
First ever post here and figure it should be what I got for Christmas. It was a new to me wave and I couldn't be happier.
I got the same. First one good thing I'm not the other leather virgin
Wellll I'm not entirely a leather virgin. I've carried a squirt p4 for almost 10 years now. This is my first big multi tool.
-
First ever post here and figure it should be what I got for Christmas. It was a new to me wave and I couldn't be happier.
Welcome ba ta, the wave is a great tool and even tho I have some other great tools I carry mine regularly.
-
A flair
(http://i782.photobucket.com/albums/yy110/johnwsjr3/D41B6B1F-0DD8-41AB-8035-98EC7D6C5008_zpskoecg4v5.jpg) (http://s782.photobucket.com/user/johnwsjr3/media/D41B6B1F-0DD8-41AB-8035-98EC7D6C5008_zpskoecg4v5.jpg.html)
-
A flair
And a fine looking one too. :salute: Unless the pate spreader has a lot of wear and tear on it..?
-
A flair
And a fine looking one too. :salute: Unless the pate spreader has a lot of wear and tear on it..?
I'm lucky, the whole thing looks like it has never been used. :)
-
Nice score on the Flair Nhoj, especially if it appears unused :tu:
-
Nice score on the Flair Nhoj, especially if it appears unused :tu:
Thanks. It is certainly getting used by me. Just not in any damaging ways.
-
Nice Flair!
-
Nice score on the Flair Nhoj, especially if it appears unused :tu:
Thanks. It is certainly getting used by me. Just not in any damaging ways.
Are you using it for food related tasks and all that fun stuff it was designed for?
-
Nice score on the Flair Nhoj, especially if it appears unused :tu:
Thanks. It is certainly getting used by me. Just not in any damaging ways.
Are you using it for food related tasks and all that fun stuff it was designed for?
Of course! :D It's going to get interesting in the summer when I remove fish hooks with it then use the fork later.
-
Nice score on the Flair Nhoj, especially if it appears unused :tu:
Thanks. It is certainly getting used by me. Just not in any damaging ways.
Are you using it for food related tasks and all that fun stuff it was designed for?
Of course! :D It's going to get interesting in the summer when I remove fish hooks with it then use the fork later.
Yeah I bet. Just don't get confused and use the fork on the fish :rofl:
-
Nice score on the Flair Nhoj, especially if it appears unused :tu:
Thanks. It is certainly getting used by me. Just not in any damaging ways.
Are you using it for food related tasks and all that fun stuff it was designed for?
Of course! :D It's going to get interesting in the summer when I remove fish hooks with it then use the fork later.
Yeah I bet. Just don't get confused and use the fork on the fish :rofl:
I sure hope I don't. Although it might work to remove fish hooks in the same manner as Victorinox's fish scaler does. :think: Now I'm wondering about scaling a fish with a sak. Then using the scaler as a fork later.
-
Nice score on the Flair Nhoj, especially if it appears unused :tu:
Thanks. It is certainly getting used by me. Just not in any damaging ways.
Are you using it for food related tasks and all that fun stuff it was designed for?
Of course! :D It's going to get interesting in the summer when I remove fish hooks with it then use the fork later.
Yeah I bet. Just don't get confused and use the fork on the fish :rofl:
I sure hope I don't. Although it might work to remove fish hooks in the same manner as Victorinox's fish scaler does. :think: Now I'm wondering about scaling a fish with a sak. Then using the scaler as a fork later.
That's one of the reasons I like having the fish scaler on my Yeochamp :tu:
-
Nice score on the Flair Nhoj, especially if it appears unused :tu:
Thanks. It is certainly getting used by me. Just not in any damaging ways.
Are you using it for food related tasks and all that fun stuff it was designed for?
Of course! :D It's going to get interesting in the summer when I remove fish hooks with it then use the fork later.
Yeah I bet. Just don't get confused and use the fork on the fish :rofl:
I sure hope I don't. Although it might work to remove fish hooks in the same manner as Victorinox's fish scaler does. :think: Now I'm wondering about scaling a fish with a sak. Then using the scaler as a fork later.
That's one of the reasons I like having the fish scaler on my Yeochamp :tu:
Hmm looks like I'm transitioning to the swiss forum. I guess forks are a transition topic then. :think:
-
Nice score on the Flair Nhoj, especially if it appears unused :tu:
Thanks. It is certainly getting used by me. Just not in any damaging ways.
Are you using it for food related tasks and all that fun stuff it was designed for?
Of course! :D It's going to get interesting in the summer when I remove fish hooks with it then use the fork later.
Yeah I bet. Just don't get confused and use the fork on the fish :rofl:
I sure hope I don't. Although it might work to remove fish hooks in the same manner as Victorinox's fish scaler does. :think: Now I'm wondering about scaling a fish with a sak. Then using the scaler as a fork later.
That's one of the reasons I like having the fish scaler on my Yeochamp :tu:
Hmm looks like I'm transitioning to the swiss forum. I guess forks are a transition topic then. :think:
That's how things work around here right? One thing leads to another, and we're talking about fish scalers as forks, and vice versa ;)
-
A flair
(http://i782.photobucket.com/albums/yy110/johnwsjr3/D41B6B1F-0DD8-41AB-8035-98EC7D6C5008_zpskoecg4v5.jpg) (http://s782.photobucket.com/user/johnwsjr3/media/D41B6B1F-0DD8-41AB-8035-98EC7D6C5008_zpskoecg4v5.jpg.html)
A very fine specimen there John :tu:
-
Picked up a Wave today at Wallyworld.
Wallyworld? Walmart? I thought my friends and I were the only ones that call it that.
LoL, we either call it Wallyworld or China Mart :)
-
Picked up a Wave today at Wallyworld.
Wallyworld? Walmart? I thought my friends and I were the only ones that call it that.
LoL, we either call it Wallyworld or China Mart :)
I call it Wallyworld but haven't heard China Mart. I've got to try that.
-
Sidekick w/ Croc $19 at Home Depot.
-
Just received my 2nd super tool 300 two days ago. Giving one to my nephew!
-
:mail: Today brought me some LM goodness as well as the couple of Alox SAK's.
A "New" Wave to go with my "Old" one.
The new one was from eBay locally for a pretty good price. Its date codes are 0812 and I got it for the price I paid for a Rebar retail recently. (I'm happier with the pre-loved Wave)
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/IMG_0013_zps8f89b0b1.jpg) (http://s1309.photobucket.com/user/Peter_Thorpe/media/IMG_0013_zps8f89b0b1.jpg.html)
-
I just received my new BO Rebar :mail: The finish is even and looks good throughout the tool. Just drew blood on a finger testing out the serrated blade. This isn't the first time this has happened to me :facepalm: Somehow the serrated blades seem to surprise me and I end up cutting deeper than expected :facepalm: Pics tonight.
-
I just received my new BO Rebar :mail: The finish is even and looks good throughout the tool. Just drew blood on a finger testing out the serrated blade. This isn't the first time this has happened to me :facepalm: Somehow the serrated blades seem to surprise me and I end up cutting deeper than expected :facepalm: Pics tonight.
Of the wound or the Rebar? Personally I don't feel the need to see a bleeding finger, but I'll happily look at the BO Rebar. ;)
-
My latest Leatherman is a Style CS to compliment my Skeletool CX I got last month.
Since October, I've added the below in order from L-R:
Rebar, BO ST300, Wave, Wingman, ST300 w/Micra, Rebar w/Micra, BO Core, Rebar (Blast replacement from warranty), Sidekick w/CROC, Skeletool CX, Style CS.
-
I just received my new BO Rebar :mail: The finish is even and looks good throughout the tool. Just drew blood on a finger testing out the serrated blade. This isn't the first time this has happened to me :facepalm: Somehow the serrated blades seem to surprise me and I end up cutting deeper than expected :facepalm: Pics tonight.
Of the wound or the Rebar? Personally I don't feel the need to see a bleeding finger, but I'll happily look at the BO Rebar. ;)
Yeah, too late for the wound picture, but I had thought about it at the time and was too busy trying to stop it from bleeding on my keyboard :facepalm: These are usually only slight surface cuts that do nothing at all, but this time it got me ;) And yes, I know it's silly to test on my fingers as opposed to say, paper, but this seems to be a good way of testing normally.
-
Great catch Nhoj
@Mango808 your collection is looking great I really like the BO Core
-
My latest Leatherman is a Style CS to compliment my Skeletool CX I got last month.
Since October, I've added the below in order from L-R:
Rebar, BO ST300, Wave, Wingman, ST300 w/Micra, Rebar w/Micra, BO Core, Rebar (Blast replacement from warranty), Sidekick w/CROC, Skeletool CX, Style CS.
3 Rebars? :drool:
-
Today I received two new Surge's (new model) and a new Rebar.
Yes, December was an expensive month! LOL
-
:D
-
@Mango808 your collection is looking great I really like the BO Core
I really like it too. It has the Cap Crimper on it as well. Never had a Leatherman with one.
Besides the above, I still have a PST, Sideclip, BO ST200, 2 Squirt P4's, 2 Micra's and a Blast.
3 Rebars? :drool:
That first Rebar on the left is what got me started on my latest buys. Got a BO ST300 but the lock tab spring broke somehow and I had to send it in for warranty. Saw the ST300 w/Micra combo on sale at West Marine for $69.99 (should hold me over while the BO ST300 goes in for warranty) and they also had the Rebar w/Micra combo for $39.99 (another great deal). The 3rd Rebar was the warranty replacement for a Blast that I sent in also.
Today I received two new Surge's (new model) and a new Rebar.
Yes, December was an expensive month! LOL
Thanksgiving weekend there was a New model Surge at West Marine for $99.99 when I got my ST300 w/Micra and Rebar w/Micra combos. The holidays was already looking to be expensive.
-
I almost picked up a new Surge today, just couldn't bring myself to spend that much money on it. I did get a PST II in the mail today though :D. It was kind of a surprise, I was expecting a PST that I got real cheap on ebay but it turned out to be an early model PST II. I guess it's back to looking for another cheap PST, I need one to steal some parts out of.
-
I almost picked up a new Surge today, just couldn't bring myself to spend that much money on it. I did get a PST II in the mail today though :D. It was kind of a surprise, I was expecting a PST that I got real cheap on ebay but it turned out to be an early model PST II. I guess it's back to looking for another cheap PST, I need one to steal some parts out of.
where is that?
-
I almost picked up a new Surge today, just couldn't bring myself to spend that much money on it. I did get a PST II in the mail today though :D. It was kind of a surprise, I was expecting a PST that I got real cheap on ebay but it turned out to be an early model PST II. I guess it's back to looking for another cheap PST, I need one to steal some parts out of.
where is that?
It is at AAFES Exchange.
-
I almost picked up a new Surge today, just couldn't bring myself to spend that much money on it. I did get a PST II in the mail today though :D. It was kind of a surprise, I was expecting a PST that I got real cheap on ebay but it turned out to be an early model PST II. I guess it's back to looking for another cheap PST, I need one to steal some parts out of.
That is not a bad price! I have seen them go for more than that on Ebay!
FYI - I didnt pay even close to that for my two! :D
-
I almost picked up a new Surge today, just couldn't bring myself to spend that much money on it. I did get a PST II in the mail today though :D. It was kind of a surprise, I was expecting a PST that I got real cheap on ebay but it turned out to be an early model PST II. I guess it's back to looking for another cheap PST, I need one to steal some parts out of.
where is that?
It is at AAFES Exchange.
I work on a base, and since i did not retire, cannot shop at the exchange :-[
I am just glad to see them in the wild
-
Here are some pics of my new BO Rebar :)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140102_123228_777_zps0b281ca7.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140102_123228_777_zps0b281ca7.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140102_123255_118_zps619b3e9f.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140102_123255_118_zps619b3e9f.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140102_123420_335_zps6c91e29b.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140102_123420_335_zps6c91e29b.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140102_123537_467_zps4c1b2eb3.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140102_123537_467_zps4c1b2eb3.jpg.html)
Here's the culprit....
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140102_123625_417_zps0e06d146.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140102_123625_417_zps0e06d146.jpg.html)
....that caused this, along with my foolishness :whistle: (Gareth, avert your eyes ;))
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140102_130714_880_zpsda4db250.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140102_130714_880_zpsda4db250.jpg.html)
-
She's a beauty! love that black oxide :tu: :tu: :D
-
She's a beauty! love that black oxide :tu: :tu: :D
Thanks buddy :D
-
Cool Rebar! Ouch, those serrated blades do come pretty sharp from the factory.
-
Cool Rebar! Ouch, those serrated blades do come pretty sharp from the factory.
Thanks :salute: Yeah, you can almost see the bone :rofl:
-
Now it's truly yours. :tu: ;)
-
Now it's truly yours. :tu: ;)
That's true :tu:
-
Here are some pics of my latest, the BO Rebar, with its twin, the SS version :D
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140102_230059_147_zpsfcd2aae8.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140102_230059_147_zpsfcd2aae8.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140102_230310_551_zps0cabf070.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140102_230310_551_zps0cabf070.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140102_230645_759_zpsdc134f67.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140102_230645_759_zpsdc134f67.jpg.html)
-
Grab a great bargain (well in my view it is) a LM Sidekick, LM Carabiner, LM Z-Rex and a Monarch 6 Torch combo, all for $88 AUD.
(http://imageshack.com/a/img845/5045/y1zk.jpg)
-
Leatherman Supertool 200 Stainless Steel Cap Crimper
-
Very cool Aloha :tu: I haven't seen many of those. Another one to add to my wish list :cheers:
-
I received a shiny new Style PS and a clip for my Kick today.
-
Very cool Aloha :tu: I haven't seen many of those. Another one to add to my wish list :cheers:
Thank you, I didn't know there was a CC in SS till I saw JSews in the ST200 Club.
-
I picked up a Leatherman lot including 2 Style CS (one pink), 2 red squirt ES4, 3 Micras ( red, green, pink). Pics later.
-
Couple of Micras....not had much interest in Leatherman's until now but I really like these little fellas!
-
This did come in today.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3810small_zps2e156651.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3810small_zps2e156651.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3811small_zps50b98721.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3811small_zps50b98721.jpg.html)
Black Hail with Style PS.
-
Pretty neat looking little tool :tu:
-
Got a Charge TTi in today...and it's going back. Scales are loose at the pivots, and I can't find my TR10 bits anywhere. Also, the edge bevels on the blade are ridiculously uneven, worse than usual, and I'm in no mood to reprofile a new blade and remove that much material. So, going to return/exchange it. Hopefully I'll get a better sample. If not, I'll keep exchanging it until I do. :)
In better news, I got two brand new original Waves, both of which are excellent. A NIB BO Blast in perfect shape...and a PST II in really nice shape.
So, not all bad. The TTi was supposed to be a user while my AL is away again for service. Buuuut...I guess it's back to the Spirit RT until my luck picks up.
-
Got a Charge TTi in today...and it's going back. Scales are loose at the pivots, and I can't find my TR10 bits anywhere. Also, the edge bevels on the blade are ridiculously uneven, worse than usual, and I'm in no mood to reprofile a new blade and remove that much material. So, going to return/exchange it. Hopefully I'll get a better sample. If not, I'll keep exchanging it until I do. :)
In better news, I got two brand new original Waves, both of which are excellent. A NIB BO Blast in perfect shape...and a PST II in really nice shape.
So, not all bad. The TTi was supposed to be a user while my AL is away again for service. Buuuut...I guess it's back to the Spirit RT until my luck picks up.
With the exception of the dud TTi, you got quite a haul there :tu: I'm especially jealous of the two new original Waves :)
-
My latest the Leatherman SideClip, got it a trade, from a great friend here. :salute:
(http://i1270.photobucket.com/albums/jj607/armee-suisse/6EBE0B5A-9607-410F-8C17-B128227559A1-112-00000030794D6AC1_zpsc9199f5f.jpg)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/3FA098D4-7EBB-401D-B33B-2733116A5F4F-112-0000003072145E62_zpsc03ae9e6.jpg)
-
armèe-suisse :tu: looks great.
Just got my BO Core in. This was a harder one for me to get mainly cause I couldn't find one at a good price to me.
-
Love the simplicity of those! They look simple and sleek! :tu:
My latest the Leatherman SideClip, got it a trade, from a great friend here. :salute:
(http://i1270.photobucket.com/albums/jj607/armee-suisse/6EBE0B5A-9607-410F-8C17-B128227559A1-112-00000030794D6AC1_zpsc9199f5f.jpg)
(http://i1270.photobucket.com/albums/jj607/armee-suisse/3FA098D4-7EBB-401D-B33B-2733116A5F4F-112-0000003072145E62_zpsc03ae9e6.jpg)
-
Japanese PST
-
I... I actually just WON an auction on ebay, for a somewhat beat-up PST II for $16.50 with shipping. Wow. :o
-
I... I actually just WON an auction on ebay, for a somewhat beat-up PST II for $16.50 with shipping. Wow. :o
I just looked at that one, good price :tu:. Looks like it should clean up nicely.
-
Yeah. Surface crud and some scratches, otherwise quite serviceable, as far as I can tell. Heh.
-
Nice grab Lynn, I hope you enjoy it :tu:
-
Thanks. I think I shipped my last PST over to bmot? I was kinda missing the old-school goodness.
-
Congrats Lynn :tu:
-
03 original wave, pretty stoked on this.
(http://img.tapatalk.com/d/14/01/08/7a4e5yru.jpg)
(http://img.tapatalk.com/d/14/01/08/emytu8a5.jpg)
Swiss Army knives .
-
Looks to be 'used but not abused'. Nice. :tu:
-
Nice one Colt1911, I like how slim it is compared to the new wave. This looks to be in nice condition does it need much cleanup?
-
Looks to be 'used but not abused'. Nice. :tu:
Needs some TLC and a hot soapy bath to bring it back to life, thats all part of the fun for me.
-
Nice one Colt1911, I like how slim it is compared to the new wave. This looks to be in nice condition does it need much cleanup?
Thanks, yeah needs some work and a bath for sure.
-
Nice Colt...I'm jealous :D
-
Nice Colt...I'm jealous :D
Thanks
Swiss Army knives .
-
Collecting can be odd at times. For a few years, I have searched for a special Micra...and then gave up thinking I would never find one. Just a week ago, I stumbled upon one for grabs on eBay and I won the auction...and it went cheap as I was prepared to go all out for it. Can't wait to get the Portland Trail Blazers #7 Brandon Roy Micra in my hands and safely in my collection. After the new Surge mix up, I do have my fingers crossed on this one.
-
Collecting can be odd at times. For a few years, I have searched for a special Micra...and then gave up thinking I would never find one. Just a week ago, I stumbled upon one for grabs on eBay and I won the auction...and it went cheap as I was prepared to go all out for it. Can't wait to get the Portland Trail Blazers #7 Brandon Roy Micra in my hands and safely in my collection. After the new Surge mix up, I do have my fingers crossed on this one.
That's great Chako. It's hard being patient some times especially when I see so many great acquisitions lately but I know items will eventually come up.
-
Collecting can be odd at times. For a few years, I have searched for a special Micra...and then gave up thinking I would never find one. Just a week ago, I stumbled upon one for grabs on eBay and I won the auction...and it went cheap as I was prepared to go all out for it. Can't wait to get the Portland Trail Blazers #7 Brandon Roy Micra in my hands and safely in my collection. After the new Surge mix up, I do have my fingers crossed on this one.
That's great Chako. It's hard being patient some times especially when I see so many great acquisitions lately but I know items will eventually come up.
I like the hunt, digging for that lost treasure , then bringing them back to life.
I can spot an Sak a half an isle down at the flea market, Sak radar ! Gotta love it
Swiss Army knives .
-
The PST II I won on ebay for $16.50 the other day showed up today in the mail. :mail:
Here it is, in all it's gorgeous crud-covered glory. NOTHING wrong with it, besides it needs to be cleaned. Wow.
(http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1614_zps182ba132.jpg)
-
Nice score Lynn! It looks like a keeper for sure! :D
The PST II I won on ebay for $16.50 the other day showed up today in the mail. :mail:
Here it is, in all it's gorgeous crud-covered glory. NOTHING wrong with it, besides it needs to be cleaned. Wow.
(http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1614_zps182ba132.jpg)
-
Nice Lynn! :tu: I think the PSTII is a great tool. Enjoy it, and naturally we await your scissor review......
-
Nice one, especially at that price.
Swiss Army knives .
-
Nice one, especially at that price.
Swiss Army knives .
I kinda had a feeling you'd dig it. :D
-
got my sideclip today. man i love this tool. it is the smoothest thing ever.
(http://farm4.staticflickr.com/3768/11894244096_a09e4a2803_b.jpg)
(http://farm4.staticflickr.com/3796/11893668913_2377635d97_b.jpg)
it reminds me of the way my original pst used to open and close, like a whisper. i probably need to find another.
-
Just got my first PST II.
-
Just got my first PST II.
What do you think of it Capt.?
@Agonistes, that Sideclip looks nice :tu: I'm slowly thinking I want one of those...
-
Im liking the PST II. The scissors have a weird way of opening and closing but I kind of like that.
-
The Croc is my newest Leatherman
I'm going to use it.
I'm sharpening its scraper edge now.
not to sharp. Lol
-
Im liking the PST II. The scissors have a weird way of opening and closing but I kind of like that.
I like the PSTII scissors also. They're a lot bigger than Leatherman's modern equivalent.
-
The scissors on the PST II are maybe 2mm longer blades than on the Wingman. There's no appreciable difference in size, there. I don't have a Wave ATM, but assume the PST II's ARE a good deal larger than those.
-
Im liking the PST II. The scissors have a weird way of opening and closing but I kind of like that.
Nice :tu: I noticed that too. They seem to open and snap harder than the other tools, if that's what you're referencing.
-
I finally got a PST2 not marked PST2. It'll need some cleaning but I'm glad to scratch this off the list, not sure why it took so long to locate :think:. Thanks Gregozedobe :tu: for pointing me in the direction.
-
Im liking the PST II. The scissors have a weird way of opening and closing but I kind of like that.
Nice :tu: I noticed that too. They seem to open and snap harder than the other tools, if that's what you're referencing.
No thats not what I meant. I mean how the scissors thumb handle flips out while the scissors stay shut as well as the spring mechanism.
-
Im liking the PST II. The scissors have a weird way of opening and closing but I kind of like that.
Nice :tu: I noticed that too. They seem to open and snap harder than the other tools, if that's what you're referencing.
No thats not what I meant. I mean how the scissors thumb handle flips out while the scissors stay shut as well as the spring mechanism.
Ah, right. The handle does flip out, which I thought was neat with how you can pull them out by that, or at least that's what I do ;)
-
Walked past it today and broke down and bought it. Last one in store got the display model with MOLLE sheath for 20% off. The OHT is awesome. (http://img.tapatalk.com/d/14/01/15/sahunege.jpg)
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
-
For a few years now I have searched for this Micra . I am :ahhh with joy now that I have one.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3968small_zps1018dac2.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3968small_zps1018dac2.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3971small_zps754cf4a4.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3971small_zps754cf4a4.jpg.html)
:D
-
It's always good to land a "unicorn". And that one looks like it is in pretty fine shape too - bonus !
-
I finally got myself a beauty of a Juice in a trade with Lynn :tu: I got a KF4 and wow its a looker.
-
Really cool Chako...I like the red/black combo :tu:
-
I finally got myself a beauty of a Juice in a trade with Lynn :tu: I got a KF4 and wow its a looker.
Nice Aloha :tu: The KF4 is a cool Juice 8)
-
I finally got myself a beauty of a Juice in a trade with Lynn :tu: I got a KF4 and wow its a looker.
I am SUPER happy that tool found a good home. Great tool, but I'd feel bad if I carried it around and banged it up.
-
I finally got myself a beauty of a Juice in a trade with Lynn :tu: I got a KF4 and wow its a looker.
I am SUPER happy that tool found a good home. Great tool, but I'd feel bad if I carried it around and banged it up.
It's in a nice new home with new friends.
-
Nice addition Aloha :tu:
-
Cabelas`s Gold Wave 30th Anniversary 11 of 60
-
Very nice Loki! When are we going to get to see some more collection pics from you? I know you have some real gems in your collection. :cheers:
-
Very nice Loki! When are we going to get to see some more collection pics from you? I know you have some real gems in your collection. :cheers:
May be summer. I do not have such a spectacular collection-I am trying to collect a new tool in the package and usually in blisters (not that presentable):)
While there are interesting exhibits
Examples last exhibits:
-
My Leathermans don't stay in the blister pack very long once in my possession :facepalm:. I've tried to keep them sealed but they always end up opened so I can get my hands on em.
Nice Crunch by the way, that is one Leatherman that has been on my wish list for a while but I can never find a very good deal on.
-
Just got a wingman for £30 I'm doing a bike test tomorrow so the money I save on beer goes on tools ha.
Sent from my iPhone using Tapatalk
-
There is another Freestyle CX coming in the mail. My brother took the one I had for a test drive Christmas morning opening up gifts. He had that look of love in his eyes so I gladly gifted it to him.
-
There is another Freestyle CX coming in the mail. My brother took the one I had for a test drive Christmas morning opening up gifts. He had that look of love in his eyes so I gladly gifted it to him.
Ah, good work hooking another one Ben :tu:
-
I got a NIB PST at outrageous low price. I do not know if I break the rules but I send the eBay link. . http://m.ebay.com/itm/321256589877?nav=SEARCH&sbk=1
Sent from my GT-I9300 using Tapatalk
-
For a few years now I have searched for this Micra . I am :ahhh with joy now that I have one.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3968small_zps1018dac2.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3968small_zps1018dac2.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3971small_zps754cf4a4.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3971small_zps754cf4a4.jpg.html)
:D
Interesting. I had no idea they had a NBA themed Micra. I'm guessing LM sponsored a theme night giveaway of these at one of Portland's home games?
Sent from my iPad using Tapatalk (http://tapatalk.com/m?id=1)
-
I believe the first time I saw one was from Bob. That was probably back in 2010. I have searched long and hard for one since...so yes, I was very happy to get one. As for the back story...
http://forum.multitool.org/leatherman-tools/brandon-roy-multi-tool-promo/msg413722/#msg413722
-
Glad you finally scored one Chako! :multi:
-
Got a new Brewzer to day to add to my key chain. Perfect for opening boxes.
-
Thanks Sawman. This was almost a piece of unobtainium.
-
raptor finally arrived. this thing is cool, i'll put some potato shots in the raptor thread.
edited because i couldn't find a raptor club; too soon? here she is:
(http://farm8.staticflickr.com/7302/12063055104_b122ea2923_b.jpg)
(http://farm4.staticflickr.com/3715/12062634845_10c8c3ac74_b.jpg)
(http://farm3.staticflickr.com/2885/12063537936_4ae8e1932e_b.jpg)
-
Yes ! I got a Charge Tti. Found it at an auction and it was new in blister pack. This gonna be a real user. Think I´ll put my ThruNite Ti2 in the pouch as it´s fits really perfectly. Almost can´t see that it´s there.
Thought that i never gonna ow an Charge due to the price here. Oops, now I have a small collection of four. Tti,Xti,Al,Al bo.
-
Pick up anther ST300+Micra combo pack for $49 before they run out.
-
Yes ! I got a Charge Tti. Found it at an auction and it was new in blister pack. This gonna be a real user. Think I´ll put my ThruNite Ti2 in the pouch as it´s fits really perfectly. Almost can´t see that it´s there.
Thought that i never gonna ow an Charge due to the price here. Oops, now I have a small collection of four. Tti,Xti,Al,Al bo.
that's a great collection of charges Mr B
-
I have over a hundred multitools of which 30+ are Leathermans. Is there a support group for people like me? Maybe a Multitool Anonymous?
-
I have over a hundred multitools of which 30+ are Leathermans. Is there a support group for people like me? Maybe a Multitool Anonymous?
Yup its called :MTO:
-
Discovered the other day that I had 3 Leatherman Surges. Posted one on Kijiji and within hours, had a buyer at the door and got $85 for it.
-
Discovered the other day that I had 3 Leatherman Surges. Posted one on Kijiji and within hours, had a buyer at the door and got $85 for it.
Keep that up and we'll have to review your membership here :pok: ;) :rofl:
-
Should be receiving a supertool 200 in the mail in a few days. Trades my wave for it. Pretty excited.
Sent from my iPhone using Tapatalk
-
Lost my Leatherman Style PS the other day. Guess I shouldn't have kept it pinned inside my coat with a safety pin. They're going for about $20 around these parts.
-
Got a old s2 today from lowtech :tu:
-
Got a old s2 today from lowtech :tu:
So how do you like the S2?
-
Got a old s2 today from lowtech :tu:
So how do you like the S2?
Like it john,to me its like how i feel about my Swisschamp and explorer as both great sak's but one is lighter to carry and has enough tools for general edc but the other one is bulkier but sooooo handy :D so now i have the same problem but with juices :facepalm:
-
Crunch
Sent from my iPad using Tapatalk (http://tapatalk.com/m?id=1)
-
Lost my Leatherman Style PS the other day. Guess I shouldn't have kept it pinned inside my coat with a safety pin. They're going for about $20 around these parts.
Ahh, that sucks! Maybe it'll turn up somewheres.
Sent from my iPad using Tapatalk
-
Though I don't carry it often. Just to be different. I'm carrying the Freestyle :tu:
-
I had a hard time deciding between the Wave and Surge when all I had were the Sidekick and Wingman and ending up opting for the Wave. I never got around to getting the Surge because the new one was coming out but heck with that I got an old Surge and a BO Wave to boot. Not at that stoked about the CC and the Surge was missing the file but otherwise they are in great shape. The Surge fits in my hand great and now I see how the Wave was pretty small in comparison.
-
Nice additions Aloha :tu:
-
Thanks, Ive been wanting the Surge and will eventually get the New one but I already like the size and weight of this old one. I love the BO Wave just not a fan of the cap crimper plier but at the price I got it I couldn't say no.
-
Charge ALX, 0507 date codes both handles, in great shape :D Just need to get a few more bits for it.
(http://pic100.picturetrail.com/VOL1149/3788424/24346734/408625905.jpg)
-
My latest LM is their carabiner. It's the perfect size for my various key rings although I have yet to test the bottle opener. I've been on the lookout for the perfect carbiner for years and to me, this is it :tu:
-
Just got a Kick. I added a black clip and rearranged the tools a bit to stop most of the clumping.
-
Just picked up my first black anodized Leatherman. A Charge ALX with a molle sheath and some driver bits. Solid Tool!
-
Charge ALX, 0507 date codes both handles, in great shape :D Just need to get a few more bits for it.
(http://pic100.picturetrail.com/VOL1149/3788424/24346734/408625905.jpg)
Very nice! :tu: For me, the ALX is the best looking in the Charge series. I've been tempted for a long time by the convenience of twin bit drivers.
-
Just picked up my first black anodized Leatherman. A Charge ALX with a molle sheath and some driver bits. Solid Tool!
:drool: I'd like to see it. Do you have any pics you could show? ;)
I like the MOLLE sheath myself but doesn't the Charge rattle about a bit in there? :think:
-
Just picked up my first black anodized Leatherman. A Charge ALX with a molle sheath and some driver bits. Solid Tool!
:drool: I'd like to see it. Do you have any pics you could show? ;)
I like the MOLLE sheath myself but doesn't the Charge rattle about a bit in there? :think:
Here is a few photos!
(http://imagizer.imageshack.us/v2/640x480q90/841/7w85.jpg) (https://imageshack.com/i/nd7w85j)
(http://imagizer.imageshack.us/v2/640x480q90/11/pzzt.jpg) (https://imageshack.com/i/0bpzztj)
The tool fits in the sheath just fine!
-
Looks like I just won a Wave off of evilbay. If it's as described, it was a pretty good price. hope I wasn't bidding against one of the folks here. :-\
-
This PST w/Amtrak logo.
-
Charge ALX, 0507 date codes both handles, in great shape :D Just need to get a few more bits for it.
Very nice! :tu: For me, the ALX is the best looking in the Charge series. I've been tempted for a long time by the convenience of twin bit drivers.
I'm liking it a lot so far and don't miss scissors at all as I always have a SAK or Micra nearby :tu:
-
Just picked up my first black anodized Leatherman. A Charge ALX with a molle sheath and some driver bits. Solid Tool!
:drool: I'd like to see it. Do you have any pics you could show? ;)
I like the MOLLE sheath myself but doesn't the Charge rattle about a bit in there? :think:
Here is a few photos!
(http://imagizer.imageshack.us/v2/640x480q90/841/7w85.jpg) (https://imageshack.com/i/nd7w85j)
(http://imagizer.imageshack.us/v2/640x480q90/11/pzzt.jpg) (https://imageshack.com/i/0bpzztj)
The tool fits in the sheath just fine!
:gimme: Very cool indeed. The black pocket clip sets it off nicely. :vader:
-
My first and latest Leatherman's are a Wave, a blue Squirt P4 and a blue Micra!!!
-
I hope a Fuse comes in the mail today. :mail:
-
Received my ST200 i the mail today.
-
Here's my ST200 and bit tool I traded my Wave for. Thanks Mercury. (http://img.tapatalk.com/d/14/01/29/se3enura.jpg)
Sent from my iPhone using Tapatalk
-
Nice ST200 & bit kit CS!
-
I hope a Fuse comes in the mail today. :mail:
:bnghd:
Still waiting.
-
Here's my ST200 and bit tool I traded my Wave for. Thanks Mercury. (http://img.tapatalk.com/d/14/01/29/se3enura.jpg)
Sent from my iPhone using Tapatalk
That's a nice looking ST200 man :tu:
-
The supertool is a beast. It's the type of tool that demands hard work which I don't so much of. The OHT fits my needs but that might change soon and if this job works out it will be a ST200 or ST300 on my belt daily.
Sent from my iPhone using Tapatalk
-
I just opened a new coyote OHT I got off eBay for $55.
-
I just opened a new coyote OHT I got off eBay for $55.
Good deal on that OHT Clark :tu:
-
Purchased another new surge for my head technician, he was jumping up n down in joy.
I take care of my employees the best I can.
-
Purchased another new surge for my head technician, he was jumping up n down in joy.
I take care of my employees the best I can.
:2tu: Thats seriously cool.
-
Purchased another new surge for my head technician, he was jumping up n down in joy.
I take care of my employees the best I can.
You hiring? :D
-
Still waiting for my rebar. But te clip for my wave is here
Sent from my iPhone using Tapatalk
-
Just picked up a Sidekick/Croc combo from Home Depot. They are now marked down to $14 US. I really don't need another one :facepalm:, but at that price....
-
Just picked up a Sidekick/Croc combo from Home Depot. They are now marked down to $14 US. I really don't need another one :facepalm:, but at that price....
In store? where?
-
Just picked up a Sidekick/Croc combo from Home Depot. They are now marked down to $14 US. I really don't need another one :facepalm:, but at that price....
In store? where?
Yes, in store. Probably nation wide, but at least in Houston. The store I visited this morning has a dozen or more. I didn't really need the one I bought....
-
Not in my area, the stores don't even have them in stock.
For such price these are great baits to get more people into MT's
-
Just ordered a black squirt ps4 to go with my ever expanding leatherman family!
-
Just picked up a Sidekick/Croc combo from Home Depot. They are now marked down to $14 US. I really don't need another one :facepalm:, but at that price....
In store? where?
I just picked up two sets in the Home Depot in Raleigh, NC, Capital Blvd store (If you happen to live nearby!). They had them out front just beyond the cash registers, near the tools in a cardboard box. My guess is they are Christmas leftovers. They had no price on them which probably explains why they had them to begin with! :oops: I also did not need one, I already had one, but I just could not pass that deal up. I also did not have a Croc, but do not know if I will ever use it.
-
My ebay leatherman arrived. That's the good news. The bad news is that it's going to have to go in for repairs. The scissor handle is broken, and the small bit is sheared off flush with the small bit holder, so there's no way to pull it out to replace it.
But, I have a Wave. So... yay! :D
-
My ebay leatherman arrived. That's the good news. The bad news is that it's going to have to go in for repairs. The scissor handle is broken, and the small bit is sheared off flush with the small bit holder, so there's no way to pull it out to replace it.
But, I have a Wave. So... yay! :D
Lynn, I'm sorry to hear about these problems. Did you get a good price on it? Don't worry, I'm sure LM will take good care of you :salute:
-
My ebay leatherman arrived. That's the good news. The bad news is that it's going to have to go in for repairs. The scissor handle is broken, and the small bit is sheared off flush with the small bit holder, so there's no way to pull it out to replace it.
But, I have a Wave. So... yay! :D
Hopefully, you will get a nice and shiny one back from Leatherman! :)
-
My ebay leatherman arrived. That's the good news. The bad news is that it's going to have to go in for repairs. The scissor handle is broken, and the small bit is sheared off flush with the small bit holder, so there's no way to pull it out to replace it.
But, I have a Wave. So... yay! :D
Hopefully, you will get a nice and shiny one back from Leatherman! :)
+1 - I'm sure they'll fix it up good, or send you a new one Lynn :tu:
-
SURGE !!! :ahhh :ahhh :ahhh :tu:
(http://imagizer.imageshack.us/v2/xq90/203/9zw1.jpg) (https://imageshack.com/i/5n9zw1j)
-
Just ordered a Skeletool yesterday, pretty excited. I wanted one right after I watched that Tom Cruise movie, Oblivion. His is partially white in the film so I need to figure out how to do that.
-
My CS4 has returned from its trip to warantyland all shiny and new. Literally new that is.
Although it was an eBay purchase listed as faulty I felt no qualms in returning it for warranty replacement. The tool generally was in very good condition with no signs of even moderately hard use, let alone abuse, but most of the backsprings were broken/missing.
So now I have a NIB CS4. Thank you LM for the great warranty service. :salute: :salute:
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20140204_181720_zps3l4kr8vj.jpg) (http://s1309.photobucket.com/user/Peter_Thorpe/media/20140204_181720_zps3l4kr8vj.jpg.html)
-
BO Super Tool 200 :D. Here it is with the rest of my 200s.
(http://i971.photobucket.com/albums/ae191/bdAmmo/image_zps79ae31be.jpg) (http://s971.photobucket.com/user/bdAmmo/media/image_zps79ae31be.jpg.html)
-
Nice ST200 collection there bdAmmo :tu:
-
Nice ST200 collection there bdAmmo :tu:
Thanks Kyle :salute: Once I found the SS CC, I just had to track down a BO model.
-
BO Super Tool 200 :D. Here it is with the rest of my 200s.
(http://i971.photobucket.com/albums/ae191/bdAmmo/image_zps79ae31be.jpg) (http://s971.photobucket.com/user/bdAmmo/media/image_zps79ae31be.jpg.html)
Great looking ST200 collection!
-
Great looking ST200 collection!
+1 :drool: (I'm jealous, especially of the ST200 SS CC ;) )
-
Rebar!!
-
My CS4 has returned from its trip to warantyland all shiny and new. Literally new that is.
Although it was an eBay purchase listed as faulty I felt no qualms in returning it for warranty replacement. The tool generally was in very good condition with no signs of even moderately hard use, let alone abuse, but most of the backsprings were broken/missing.
So now I have a NIB CS4. Thank you LM for the great warranty service. :salute: :salute:
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20140204_181720_zps3l4kr8vj.jpg) (http://s1309.photobucket.com/user/Peter_Thorpe/media/20140204_181720_zps3l4kr8vj.jpg.html)
It's a beauty! I miss mine... never should have traded it off :oops:
-
Well my body may still feel like crap but my spirits are high.
I got a leatherman pulse in the mail today.
its like having a old friend back.
I edced a pulse back in the day. I believe its still a excellent tool 10 years later. Leatherman should have kept it around longer. I myself like the lock and all of its tools.
-
BO Super Tool 200 :D. Here it is with the rest of my 200s.
Great collection of ST200s
-
Well my body may still feel like crap but my spirits are high.
I got a leatherman pulse in the mail today.
its like having a old friend back.
I edced a pulse back in the day. I believe its still a excellent tool 10 years later. Leatherman should have kept it around longer. I myself like the lock and all of its tools.
I think the Pulse may just have been the best tool LM have made
-
A Rebar, ST300 and two Mirca
-
Well my body may still feel like crap but my spirits are high.
I got a leatherman pulse in the mail today.
its like having a old friend back.
I edced a pulse back in the day. I believe its still a excellent tool 10 years later. Leatherman should have kept it around longer. I myself like the lock and all of its tools.
I think the Pulse may just have been the best tool LM have made
I'm happy to have one back.
I forgot about the rounded edges. Its a saw away from being my personal favorite leatherman
-
Well my body may still feel like crap but my spirits are high.
I got a leatherman pulse in the mail today.
its like having a old friend back.
I edced a pulse back in the day. I believe its still a excellent tool 10 years later. Leatherman should have kept it around longer. I myself like the lock and all of its tools.
Nice Joel, a new toy is a good way to raise the spirit :tu: I'm still on the fence about getting a Pulse. Sometimes I really feel like I want one, then others I don't seem as sure...
-
New company policy: Every employee shall EDC a Leatherman MT. Placing a big order with home depot as we speak.
-
Recently got an excellent condition ST300 as an around the house tool, which has already helped to fix a snow auger twice, and I just received my Raptor last night. It's sitting on my belt right now, itching to be used.
The world belongs to the funkiest.
-
Just received my 7th Leatherman product in the mail today....a Squirt PS4. I put it on my keychain and can't wait to try it out.
-
New company policy: Every employee shall EDC a Leatherman MT. Placing a big order with home depot as we speak.
This is a killer company policy. What will everyone EDC?
Just received my 7th Leatherman product in the mail today....a Squirt PS4. I put it on my keychain and can't wait to try it out.
Cool!!!! While I dont have a PS4 all the reviews are its a great little tool. I have a Dime and when paired with a smaller SAK 58mm its a nice little combo. Let us know how it works for you and dont forget to snap some pictures of it in use :tu:
-
New company policy: Every employee shall EDC a Leatherman MT. Placing a big order with home depot as we speak.
This is a killer company policy. What will everyone EDC?
There are no killers in my company! Everyone will be issue a ST300 and a Micra, EDC at least one of them.
-
Can I come work for you?
The world belongs to the funkiest.
-
New company policy: Every employee shall EDC a Leatherman MT. Placing a big order with home depot as we speak.
This is a killer company policy. What will everyone EDC?
There are no killers in my company! Everyone will be issue a ST300 and a Micra, EDC at least one of them.
I work as a security officer and as far as I know I'm the only one on this contract that carries a MT, I wish it was company policy but alas it is not.
As for my latest MT's I aquired about a month ago a broken Wave original and a broken XE6 and yes I sent them both in for warranty.
-
New company policy: Every employee shall EDC a Leatherman MT. Placing a big order with home depot as we speak.
This is a killer company policy. What will everyone EDC?
There are no killers in my company! Everyone will be issue a ST300 and a Micra, EDC at least one of them.
I work as a security officer and as far as I know I'm the only one on this contract that carries a MT, I wish it was company policy but alas it is not.
As for my latest MT's I aquired about a month ago a broken Wave original and a broken XE6 and yes I sent them both in for warranty.
Welcome to MTo, the Original Wave is a nice slim MT for either pocket carry or sheath. I haven't had a chance to hold the XE6 but it looks like a thick tool with lots of capabitlity.
-
Thanks, the XE6 is pretty nice but I haven't used half the tools on it. Kinda sad they're gonna get rid of the purple though then again the scales are going to be stainless now.
-
Can I come work for you?
Sorry, I can't trust someone from the Weyland-Yutani. ;)
-
But we're building better worlds...
The world belongs to the funkiest.
-
More like building scarier worlds. :whistle:
-
got a 154cm folder for ten dollars and a micra in a cool leatherman tin for eight dollars at a clearance at the local military/sport/edc store. lol they were actually HOLDING THEM FOR ME, because they pretty much knew i'd get them.
sigh... :facepalm:
-
Bought a Skeletool with my tax refund. And should have a Charge Tti on the way in a few days....... :facepalm:
-
Bought a rebar micra set!! The Rebar is really nice.
Sent from my iPhone using Tapatalk
-
My Fuse just arrived today. :mail:
-
My Fuse just arrived today. :mail:
And?
What do you think?
Can it challenge the Spirit?
-
My Fuse just arrived today. :mail:
And?
What do you think?
Can it challenge the Spirit?
And.....
:worthless:
:D
-
My Fuse just arrived today. :mail:
And?
What do you think?
Can it challenge the Spirit?
And.....
:worthless:
:D
I would definitely say that it can challenge the Spirit, but the Spirit X is still better.
As for the picture...
(http://i1328.photobucket.com/albums/w539/CanadianLMfan/fuseandspirit_zps93eb7ca8.png) (http://s1328.photobucket.com/user/CanadianLMfan/media/fuseandspirit_zps93eb7ca8.png.html)
-
It does look like it would be a good challenge for the Spirit. The Fuse looks like a good tool, and the handles look like they'd be comfortable to hold.
-
It does look like it would be a good challenge for the Spirit. The Fuse looks like a good tool, and the handles look like they'd be comfortable to hold.
Mine has a little rust and a few scratches on the pliers, and someone engraved B.J. onto it.
Still a very nice tool.
-
Ok.... I went just a little over board with my tax refund.... I've always wanted an Alox Swiss Army knife though.....(http://img.tapatalk.com/d/14/02/12/yje9erug.jpg)
Sent from my iPhone using Tapatalk
-
New company policy: Every employee shall EDC a Leatherman MT. Placing a big order with home depot as we speak.
This is a killer company policy. What will everyone EDC?
There are no killers in my company! Everyone will be issue a ST300 and a Micra, EDC at least one of them.
I work as a security officer and as far as I know I'm the only one on this contract that carries a MT, I wish it was company policy but alas it is not.
As for my latest MT's I aquired about a month ago a broken Wave original and a broken XE6 and yes I sent them both in for warranty.
I work as a security officer as well, I used to be the only one who carried a MT, I gave my sidekick to my fellow graveyard guy and he carries it everyday now on shift and at home. I turned him into MT nut. Last I checked he ordered a surge. :multi:
-
I just got in a new stainless Surge. Now I can put that quest behind me. :surrender: :D
-
I work as a security officer as well, I used to be the only one who carried a MT, I gave my sidekick to my fellow graveyard guy and he carries it everyday now on shift and at home. I turned him into MT nut. Last I checked he ordered a surge. :multi:
If you tell him about the forum he might really go overboard. Good work on converting your coworker. :tu:
-
Hahaha I might and he might freak out over how many models there are.
Sent from my iPhone using Tapatalk
-
I work as a security officer as well, I used to be the only one who carried a MT, I gave my sidekick to my fellow graveyard guy and he carries it everyday now on shift and at home. I turned him into MT nut. Last I checked he ordered a surge. :multi:
If you tell him about the forum he might really go overboard. Good work on converting your coworker. :tu:
+1 - Good job :tu:
-
Bought a silver skeletool.
Sent from my iPhone using Tapatalk
-
It does look like it would be a good challenge for the Spirit. The Fuse looks like a good tool, and the handles look like they'd be comfortable to hold.
The Fuse is sadly underrated! I think the biggest problem they had was the fact that the Zytel liners need a breaking in period. Also nice and easy to mod!
-
Not sure what you mean about breaking in the Zytel liners. :think:
-
Not sure what you mean about breaking in the Zytel liners. :think:
When I first got my Bladeless Fuse,it was very,very stiff. Unlike my Wave,PST or Skeli,lubrication didn't help,it only loosened up through use. My Kick,and mt flat mates Blast were all the same
-
I got a Juice S2. Funny how this tool is one I've wanted for a while and never picked one up. I've seen all the pictures and read Lynn's great thread on comparing it to a Tinker Deluxe (??) but I still wasn't ready for how compact this tool is. I like it so far in hand and carried it last night in 5th pocket. I give it a go and see how it works but over all I'm happy so far.
-
Nice one Aloha :tu: The Juice S2 really is a great little MT with all the basics. I can't believe I haven't been carrying mine while kicking around the home evenings after work. I did last night and it is so pocketable and covers anything I'd likely ever need evenings while sitting at my computer ;)
-
Nice one Aloha :tu: The Juice S2 really is a great little MT with all the basics. I can't believe I haven't been carrying mine while kicking around the home evenings after work. I did last night and it is so pocketable and covers anything I'd likely ever need evenings while sitting at my computer ;)
It has alway received good reviews and I've always wanted one but the cost kept me away honestly. I found one at a good price and it arrived yesterday so in the pocket it goes as my plier layer. I really like the color and size.
-
Matching numbers PST2, with PST2 markings on the handles,thanks to Dunc :salute:
-
Latest Leatherman. Thanks Lynn! I'm really liking it. If I could tip-up carry it, it would be real nice! :tu:
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%204/image_zps7a804bd2.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%204/image_zps7a804bd2.jpg.html)
-
I just ordered a LM Squirt PS4 in black, should be here Monday/Tuesday... this will go with my Surge and Sidekick. The Micra is going to my Wife as she now uses my Wingman and the Rebar is the car with the Z-Rex.
-
Fresh juice :)
(http://img-fotki.yandex.ru/get/9760/11586821.0/0_15c4bf_984ecea2_XXL.jpg)
-
Fresh juice :)
http://img-fotki.yandex.ru/get/9760/11586821.0/0_15c4bf_984ecea2_XXL.jpg
Nice. :tu: Congrats. Is it black or just really dark gray as on the dark gray Juice C2? And maybe you could add that picture to the Juice colors thread too? :cheers:
-
Is it black or just really dark gray as on the dark gray Juice C2? And maybe you could add that picture to the Juice colors thread too? :cheers:
It's real black.
(http://img-fotki.yandex.ru/get/9760/11586821.1/0_15c543_b0f766e3_XXL.jpg)
-
Nice! I actually like that one better than the other new juice line coming out.
-
Thank you. :hatsoff:
-
I just got my latest LM-The Raptor:
(http://i58.tinypic.com/2cqmmgl.jpg)
(http://i62.tinypic.com/9iqx4o.jpg)
-
I have a new style Charge TTi on the way from eBay and a couple of spare clips. I already have a nice assortment of spare bits. I plan to use this as my EDC as other options to the REBAR and WingMan. I really miss the OHO blades and bit driver.
-
I picked up a Crunch, a Skeletool, Skeletool CS, a beat up Supertool, a Style, a Micra and a Micra with red plastic covering the scales.
-
Ive got an OHT, Kick, Micra, BO ST300 EOD to trade for a Juice KF4 on the way. Had an old style BO Wave but it fell through, thinking about getting a Crunch to play with.
Sent from my SCH-I605 using Tapatalk
-
I have a new style Charge TTi on the way from eBay and a couple of spare clips. I already have a nice assortment of spare bits. I plan to use this as my EDC as other options to the REBAR and WingMan. I really miss the OHO blades and bit driver.
Nice man :tu:. I want the new style scaled TTi.
-
Was hoping to get a Core but it went past what I wanted to pay on ebey.
-
Just received my new little LM Squirt PS4 in black yesterday came with a pocket/lanyard clip for my Surge and a Black Paracord bracelet...
Gave my Micra to my wife to go with the Wingman I gave her.
(http://img.tapatalk.com/d/14/02/18/baragyhy.jpg)
Sent from my SM-N9005 using Tapatalk
-
Still the Leatherman crunch. And i don't feel a need for anything else.
If there would be a new crunch coming up though...
Imagine outside opening tools, a build in bit-ratchet...
-
My latest is a Leatherman Wingman... and you know what? It's REALLY good.
Initially I hated the thing, but a couple months in, it's suprising how good it is. You can put more pressure on the pliers than the Wave, it doesn't rust at all, the scissors are excellent (and quite large).
My only gripe is I hate the serrated part of the knife blade, and when I open the knife the serrations rip up my thumb fairly often. Highly recommended though.
Leatherman Wingman Review (http://www.youtube.com/watch?v=4KewE9jbQ2M#ws)
-
A BO OHT and I think I am in multitool love.
-
I finally got a PS4, not sure why it took so long :think:. Neat little LM that will now replace my Dime for the time being.
-
Picked up a Crunch the other day.
Immediately prior to that it was an impulse buy on a MUT :facepalm:.
-
I just got my refurbished Wave back from Leatherman. Awesome. In getting/trying/trading away tools, the Wave was the one I'd regretted getting rid of most.
Now it's back, and I'm happy.
-
Cabelas Charge. I'll get a better pic up to give it justice.
-
Cabelas Charge. I'll get a better pic up to give it justice.
Sweet Charge Ben :tu:
-
2013 Charge TTi :)
-
Cabelas Charge. I'll get a better pic up to give it justice.
That is one sweet look Charge! :drool:
-
Picked up a Z-Rex today. Not sure how I feel about it yet. I'll have to take some time and compare it to my Benchmade 8Med Rescue Hook as it's a similar form factor. At least the Z-Rex sheath is easier to belt mount as it doesn't require a Malice clip.
-
Friday went by the office to find my BO ST300 EOD sitting there, boxed it up and shipped it out (traded for a KF4) also sitting there was a BO Surge (old model) and when I got home I had a Tan OHT waiting for me. Friday was a good day
Sent from my SCH-I605 using Tapatalk
-
I have scored around a week ago a NIB PST for 40$ shipped, isn't it sweet?
ΜΟΛΩΝ ΛΑΒΕ......
-
That is very sweet!!!
Sent from my iPhone 5 using Tapatalk
-
That is very sweet!!!
Sent from my iPhone 5 using Tapatalk
And are still available for 39$......
ΜΟΛΩΝ ΛΑΒΕ......
-
SILVER!!!! Leatherman OHT
(http://i1252.photobucket.com/albums/hh571/ajones1051/_573_zps4247a0cf.jpg)
-
SILVER!!!! Leatherman OHT
(http://i1252.photobucket.com/albums/hh571/ajones1051/_573_zps4247a0cf.jpg)
Dale, how do you like the silver finish? I saw those online at Cabela's when I was searching for a Coyote Brown model. Wasn't sure from the stock photos how it would look in person or how the finish was applied. Is it a coating or bare metal?
-
Hasnt arrived yet, let ya know
-
:mail:
SILVER!!!! Leatherman OHT
(http://i1252.photobucket.com/albums/hh571/ajones1051/_573_zps4247a0cf.jpg)
:drool:
-
I went to Home Depot today and bought a new Wave. This will be part of my EDC rotation along with a 40 piece bit kit that I will carry on those days. I also fitted it with a clip in case I wish to pocket carry it. Anyhow, it's great to have use of the LM bits again! I have a bit extender on the way which will go in the sheath and I might even look into a Skinth to carry more stuff.
-
I picked up a little Leatherman Freestyle (and a SAK Cadet) for my old man. His old small single blade knife finally gave out on him after 40 odd years and he wanted something very small and simple for his pocket carry.
I think he'll be chuffed with the Cadet… but possibly not so much this. It's a shame too because they're $40 something USD over here (we pay 2-3x what you guys in the US pay for most things like this). It's very heavy for its size and for some reason I expected spring loaded pliers… don't know why.
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/96548648-A913-48B9-93B3-E51F860B219F_zps7lpby93y.jpg)
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/852B6F3B-C789-4039-8C3E-8DA6E44CAB23_zpsekyhth9u.jpg)
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/A2D8E5FC-D1DE-4ECA-B7D8-D6BA9B1D427C_zpsi6yi2rcs.jpg)
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/83421CDC-2040-4998-9A4A-8744A078433F_zpsifkkazhv.jpg)
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/FFA0B9B4-C9F3-439D-B3C9-19B1A8830477_zpsmkn0536z.jpg)
-
RimfireNZ, I had a Freestyle for all of 3 days last year. Sold it to a co-worker who thought it looked cool. It's too minimal for my needs and for the price really wasn't worth it in my eyes.
-
The Freestyle is okay, but it wasn't for me either. I sold mine to a friend here. It wouldn't have been as bad if it wasn't for the poor ergonomics while using the pliers.
-
Yeah that's the thing, it's not very good at being a pair of pliers, and it's not very good at being a knife.
Plus, it appears to weigh as much as my Blast! How'd that happen?
Oh well, he'll probably end up selling it if he doesn't like it. No biggie.
-
I don't think the Freestyle is worth the 35 or so dollars its going for now either. How can you have only two functions and not do either of them overly well?
-
Just received a PST II in the mail. What a great size. It is a little uncomfortable when applying pressure when using the pliers, but worth it for the size and weight. I also wish it had a plain edge blade, but I can live with it. I don't understand why Leatherman would stop making the PST/PST II. I was really surprised when I opened the package. I thought I was sent the wrong tool at first. I can fit this thing in my fifth pocket.
-
Just received a PST II in the mail. What a great size. It is a little uncomfortable when applying pressure when using the pliers, but worth it for the size and weight. I also wish it had a plain edge blade, but I can live with it. I don't understand why Leatherman would stop making the PST/PST II. I was really surprised when I opened the package. I thought I was sent the wrong tool at first. I can fit this thing in my fifth pocket.
I knew you would like it. Why Leatherman stopped making them is as much a mystery to me as you. Great slim tool. :tu:
-
Just received a PST II in the mail. What a great size. It is a little uncomfortable when applying pressure when using the pliers, but worth it for the size and weight. I also wish it had a plain edge blade, but I can live with it. I don't understand why Leatherman would stop making the PST/PST II. I was really surprised when I opened the package. I thought I was sent the wrong tool at first. I can fit this thing in my fifth pocket.
I knew you would like it. Why Leatherman stopped making them is as much a mystery to me as you. Great slim tool. :tu:
+1 - the PST/PSTII are great for light carry, yet offer a good tool loadout at the same time. It's my favorite for carry at home after work :tu:
-
Ok today was a good day, I got my Kick and Micra from ebay, KF4 from bdAmmo and a BO Wave today (http://img.tapatalk.com/d/14/02/26/3ydy8yre.jpg)
On a sad not my new OHT is on its way to Portland.
Sent from my SCH-I605 using Tapatalk
-
Mmmmm, BO! :drool:
Leather is good, they'll sort your OHT out for ya.
Sent from my iPhone 5 using Tapatalk
-
I like the BO, I got an old BO Surge the other day and had to have a wave.
Sent from my SCH-I605 using Tapatalk
-
I have this Leatherman Wingman since a year and I am quite satisfied with it. This lightweight multitool serves amazing purposes!! It is used as wire stripper or as a bottle opener. Since this is compact, it can be a great asset for pocket knives lover.
This is actually a very nice product!!!!
-
I have this Leatherman Wingman since a year and I am quite satisfied with it. This lightweight multitool serves amazing purposes!! It is used as wire stripper or as a bottle opener. Since this is compact, it can be a great asset for pocket knives lover.
This is actually a very nice product!!!!
I love my Wingman. Initially I didn't like it at all but it's definitely grown on me. I'd recommend it to anyone. The scissors are excellent, the one hand open is great. The main thing I don't like about it is the serrated knife. I keep catching my thumb on it with the one hand open. I'd prefer to swap it with the blade from the sidekick.
-
Ok today was a good day, I got my Kick and Micra from ebay, KF4 from bdAmmo and a BO Wave today
Nice haul :tu:
-
Just received a PST II in the mail. What a great size. It is a little uncomfortable when applying pressure when using the pliers, but worth it for the size and weight. I also wish it had a plain edge blade, but I can live with it. I don't understand why Leatherman would stop making the PST/PST II. I was really surprised when I opened the package. I thought I was sent the wrong tool at first. I can fit this thing in my fifth pocket.
Gareth swapped out the combo for a plain edge :pok:
I have a PE up for grabs if your interested :pok:
-
Just received a PST II in the mail. What a great size. It is a little uncomfortable when applying pressure when using the pliers, but worth it for the size and weight. I also wish it had a plain edge blade, but I can live with it. I don't understand why Leatherman would stop making the PST/PST II. I was really surprised when I opened the package. I thought I was sent the wrong tool at first. I can fit this thing in my fifth pocket.
Gareth swapped out the combo for a plain edge :pok:
I have a PE up for grabs if your interested :pok:
'
I think you should try a Pulse :whistle: :pok: :pok:
-
I have this Leatherman Wingman since a year and I am quite satisfied with it. This lightweight multitool serves amazing purposes!! It is used as wire stripper or as a bottle opener. Since this is compact, it can be a great asset for pocket knives lover.
This is actually a very nice product!!!!
I couldn't agree more! Love my Wingman. :salute:
-
I have this Leatherman Wingman since a year and I am quite satisfied with it. This lightweight multitool serves amazing purposes!! It is used as wire stripper or as a bottle opener. Since this is compact, it can be a great asset for pocket knives lover.
This is actually a very nice product!!!!
I couldn't agree more! Love my Wingman. :salute:
Agreed. Good functions/form/price and I find they are really well received as gifts.
-
Just received a PST II in the mail. What a great size. It is a little uncomfortable when applying pressure when using the pliers, but worth it for the size and weight. I also wish it had a plain edge blade, but I can live with it. I don't understand why Leatherman would stop making the PST/PST II. I was really surprised when I opened the package. I thought I was sent the wrong tool at first. I can fit this thing in my fifth pocket.
Gareth swapped out the combo for a plain edge :pok:
I have a PE up for grabs if your interested :pok:
I am definitely interested! Is there a particular tool for taking these apart?
-
Just received a PST II in the mail. What a great size. It is a little uncomfortable when applying pressure when using the pliers, but worth it for the size and weight. I also wish it had a plain edge blade, but I can live with it. I don't understand why Leatherman would stop making the PST/PST II. I was really surprised when I opened the package. I thought I was sent the wrong tool at first. I can fit this thing in my fifth pocket.
Gareth swapped out the combo for a plain edge :pok:
I have a PE up for grabs if your interested :pok:
'
I think you should try a Pulse :whistle: :pok: :pok:
I've already been searching. :D :facepalm:
-
I've owned many leathermans but this has withstood the test of time. (http://img.tapatalk.com/d/14/02/27/yvydadyn.jpg)
-
I am definitely interested! Is there a particular tool for taking these apart?
Security Torx T10 x2. At least I think the Wingman needs the security bits. Hard to tell from website pics and I don't have mine handy at the moment.
Of course, having those bits means you can mod your other full size Leathermans as well... :whistle:
-
It's definitely not a torx. The PST has a screw like my ST300. It's not a screw I've come across.
-
It's definitely not a torx. The PST has a screw like my ST300. It's not a screw I've come across.
My bad. Thought we were talking about the Wingman... :facepalm:
I use vise grips to take apart tools like the ST300 and Rebar. You can pad the jaws to help prevent marring of the heads. I also heat the screws with a lighter to make sure any loctite is loosened when I take apart a new tool.
-
As a follow on to the take-down tools question.
LM sanctioned tools: http://forum.multitool.org/index.php/topic,5902.0.html
Modder made tools: http://forum.multitool.org/index.php?topic=7167.msg130516#msg130516
-
That's a bummer you can't purchase the tools needed. Looks like I'll have to try the vise grip option if I choose to go ahead with this. Thanks for the links!
-
That's a bummer you can't purchase the tools needed. Looks like I'll have to try the vise grip option if I choose to go ahead with this. Thanks for the links!
No worries. I've had lots of success with the vise grips. Trick is to tape or pad the jaws, go slow and heat the pivots first.
I made the mistake of not heating the pivots on the first Kick I took apart and mangled the heads on the tool side pivots. They still worked after, but looked a little rough.
-
I just got a new style Surge in black oxide but I think I like the stainless better.
-
Leatherman Charge 30th Anniversary
-
Leatherman Charge 30th Anniversary
Nice one !
-
I have a Supertool 200 waiting for me at home!! :drool:
-
A very cool Super Tool 300 EOD came in today. Thanks mtngoat :salute:
-
Leatherman Charge 30th Anniversary
Nice one !
Yes, congrats. :cheers:
-
A very cool Super Tool 300 EOD came in today. Thanks mtngoat :salute:
You know I don't have any use for the EOD tools, but thats just :drool:
-
Just received a PST II in the mail. What a great size. It is a little uncomfortable when applying pressure when using the pliers, but worth it for the size and weight. I also wish it had a plain edge blade, but I can live with it. I don't understand why Leatherman would stop making the PST/PST II. I was really surprised when I opened the package. I thought I was sent the wrong tool at first. I can fit this thing in my fifth pocket.
Gareth swapped out the combo for a plain edge :pok:
I have a PE up for grabs if your interested :pok:
I am definitely interested! Is there a particular tool for taking these apart?
Either two Kick pocket clips,or two pairs of pliers,used carefully!
-
A very cool Super Tool 300 EOD came in today. Thanks mtngoat :salute:
Glad you like it, im really digging my KF4.
Sent from my SCH-I605 using Tapatalk
-
Just received a PST II in the mail. What a great size. It is a little uncomfortable when applying pressure when using the pliers, but worth it for the size and weight. I also wish it had a plain edge blade, but I can live with it. I don't understand why Leatherman would stop making the PST/PST II. I was really surprised when I opened the package. I thought I was sent the wrong tool at first. I can fit this thing in my fifth pocket.
Gareth swapped out the combo for a plain edge :pok:
I have a PE up for grabs if your interested :pok:
I am definitely interested! Is there a particular tool for taking these apart?
Either two Kick pocket clips,or two pairs of pliers,used carefully!
Seems like this swap would be fairly easy. I think I'm gonna give it a go. If that PE is still up for grabs let me know. Thanks.
-
You know I don't have any use for the EOD tools, but thats just :drool:
Mostly no one does have a use for EOD tools but they do have a lure about them :think:
-
You know I don't have any use for the EOD tools, but thats just :drool:
Mostly no one does have a use for EOD tools but they do have a lure about them :think:
That they do. :dd:
-
I can think of a few uses for that C4 punch beside using it for C4. Although, I wish I had some C4.
that's us mobile
-
Got this one in yesterday. :woohoo:
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P2270051.jpg)
-
Got this one in yesterday. :woohoo:
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P2270051.jpg)
Nice Clean,looking pulse,man.
I got a black oxide charge alx today. :)
-
Got this one in yesterday. :woohoo:
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P2270051.jpg)
I've been trolling the bay for one of these, but the prices are a bit more than I want to pay. Hopefully I'll snag one sometime though. I really want to try out the lock system.
-
Got this one in yesterday. :woohoo:
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P2270051.jpg)
I've been trolling the bay for one of these, but the prices are a bit more than I want to pay. Hopefully I'll snag one sometime though. I really want to try out the lock system.
Keep looking. I got this one for 28.50 Euro shipped from Germany. And I saw one being sold in the US last week for $30 plus shipping. One just has to be fast when they show up with a good BIN price or be lucky enough to find one mislisted. ;)
-
Sweet looking Pulse Enki :tu:
-
Sweet looking Pulse Enki :tu:
Thanks. :cheers:
-
Just received a PST II in the mail. What a great size. It is a little uncomfortable when applying pressure when using the pliers, but worth it for the size and weight. I also wish it had a plain edge blade, but I can live with it. I don't understand why Leatherman would stop making the PST/PST II. I was really surprised when I opened the package. I thought I was sent the wrong tool at first. I can fit this thing in my fifth pocket.
Gareth swapped out the combo for a plain edge :pok:
I have a PE up for grabs if your interested :pok:
I am definitely interested! Is there a particular tool for taking these apart?
Either two Kick pocket clips,or two pairs of pliers,used carefully!
Seems like this swap would be fairly easy. I think I'm gonna give it a go. If that PE is still up for grabs let me know. Thanks.
Pop me a PM with your address,and I'll get it in the post to you :tu:
-
Just received a PST II in the mail. What a great size. It is a little uncomfortable when applying pressure when using the pliers, but worth it for the size and weight. I also wish it had a plain edge blade, but I can live with it. I don't understand why Leatherman would stop making the PST/PST II. I was really surprised when I opened the package. I thought I was sent the wrong tool at first. I can fit this thing in my fifth pocket.
Gareth swapped out the combo for a plain edge :pok:
I have a PE up for grabs if your interested :pok:
I am definitely interested! Is there a particular tool for taking these apart?
Either two Kick pocket clips,or two pairs of pliers,used carefully!
Seems like this swap would be fairly easy. I think I'm gonna give it a go. If that PE is still up for grabs let me know. Thanks.
Pop me a PM with your address,and I'll get it in the post to you :tu:
This place rocks! Thanks again! PM sent.
-
Busted out the Skinth today. Not 100% stuffed to capacity but full. The Charge and Ruby Spartan lite. PM2 in pocket. If anybody is wanting to get rid of their digicam scaled Huntsman im game. :D
EDIT: Wrong thread oops
-
Got this one in yesterday. :woohoo:
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P2270051.jpg)
Nik that Pulse sure is a beauty. :dd: :)
-
My last eBay purchase finally got here a couple days ago. So far I'm really liking the Wave (it makes my Surge seem HUGE!); and the Micra is a really neat little tool for its size.
(http://img.tapatalk.com/d/14/02/28/u9egy7ug.jpg)
-
Hopefully a black oxide charge clip.
-
Got this one in yesterday. :woohoo:
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P2270051.jpg)
Nik that Pulse sure is a beauty. :dd: :)
Thanks, David. I love it. Date codes 1000 in both handles.
-
My last eBay purchase finally got here a couple days ago. So far I'm really liking the Wave (it makes my Surge seem HUGE!); and the Micra is a really neat little tool for its size.
(http://img.tapatalk.com/d/14/02/28/u9egy7ug.jpg)
I'm glad you like it. The Wave is my #1 EDC since I got a new one. :tu:
-
Got this one in yesterday. :woohoo:
(http://i1255.photobucket.com/albums/hh627/enki_ck/Multitools/P2270051.jpg)
Nik that Pulse sure is a beauty. :dd: :)
Thanks, David. I love it. Date codes 1000 in both handles.
Must've been a good month, then, mine has those date codes as well :tu:
-
I never realized just how nice looking the Pulse is until I had seen these pics. :drool:
-
I found a just about new red style cs in the WalMart parking lot a few minutes ago.
:multi:
-
I found a just about new red style cs in the WalMart parking lot a few minutes ago.
:multi:
That's a good tool, good find! :multi:
-
Mailman brought this.....
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190217_zpsvsqqm4e6.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190337_zps3c5qbev3.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190448_zpscfwoo6cy.jpg)
-
Finally got the Squirt PS4 Black last week, my son liked it so much he asked for one in blue for his 13th Birthday..
(http://img.tapatalk.com/d/14/03/01/qeqate7e.jpg)
My son got the following for his birthday
(http://img.tapatalk.com/d/14/03/01/myte9y6y.jpg)
Sent from my SM-N9005 using Tapatalk
-
I just picked up a PST2 that was still in the clamshell package. I made it all the way to the parking lot before opening it. Date stamps of May and August 2001. I'd like to post pictures, but I don't have access to real internet, and I don't want to waste a million years trying to post from my phone. Maybe someday when I return to civilization. I like this little guy so far.
-
I gave away my last Micra about 2 weeks ago, so I picked up two used ones at a gun and knife show today for $25.
Both in very good condition. I certainly felt they were worth the money.
-
I found a combo pack of Wave + 40-pc bit kit + P3 Lenser for $55 so I jumped on it! One can never have too many Waves :tu:
-
I found a just about new red style cs in the WalMart parking lot a few minutes ago.
:multi:
That's a good tool, good find! :multi:
Thanks Man.
-
Mailman brought this.....
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190217_zpsvsqqm4e6.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190337_zps3c5qbev3.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190448_zpscfwoo6cy.jpg)
:pok: So, is it metal or a coating for the silver panels?
-
Mailman brought this.....
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190217_zpsvsqqm4e6.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190337_zps3c5qbev3.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190448_zpscfwoo6cy.jpg)
:pok: So, is it metal or a coating for the silver panels?
Its a coating on the sliver one I seen it was anyway.
If I'm wrong I'm sorry. I'm pretty sure I am right.
-
Mailman brought this.....
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190217_zpsvsqqm4e6.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190337_zps3c5qbev3.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190448_zpscfwoo6cy.jpg)
:pok: So, is it metal or a coating for the silver panels?
Its a coating on the sliver one I seen it was anyway.
If I'm wrong I'm sorry. I'm pretty sure I am right.
That's a deal-breaker for me then. Was hoping it was uncoated metal. If that's the case, then I'll be looking to pick up a Coyote brown one at a later date.
-
Mailman brought this.....
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190217_zpsvsqqm4e6.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190337_zps3c5qbev3.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190448_zpscfwoo6cy.jpg)
:pok: So, is it metal or a coating for the silver panels?
Its a coating on the sliver one I seen it was anyway.
If I'm wrong I'm sorry. I'm pretty sure I am right.
That's a deal-breaker for me then. Was hoping it was uncoated metal. If that's the case, then I'll be looking to pick up a Coyote brown one at a later date.
It looks like unpolished aluminum to me... I scraped a blade across it. It got shiny but didn't didnt remove anything..
-
Mailman brought this.....
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190217_zpsvsqqm4e6.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190337_zps3c5qbev3.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140228_190448_zpscfwoo6cy.jpg)
:pok: So, is it metal or a coating for the silver panels?
Its a coating on the sliver one I seen it was anyway.
If I'm wrong I'm sorry. I'm pretty sure I am right.
That's a deal-breaker for me then. Was hoping it was uncoated metal. If that's the case, then I'll be looking to pick up a Coyote brown one at a later date.
It looks like unpolished aluminum to me... I scraped a blade across it. It got shiny but didn't didnt remove anything..
you tried scratching it and its not coated. I was sure it was a coating. I looked at one quick at work when a guy had one he got from Cabelas http://www.cabelas.com/product/LEATHERMAN-OHT-SILVER/1641565.uts
not the first time I've been wrong :facepalm:
it says in its description that it has stainless steel body with imprinted handle scales. Whatever that means???
-
Nah brother.. I was trying to figure it out myself.
These pictures have not be altered in any way...
First Pic.... OHT straight out the box...
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140301_210157_zpsolkqxdnm.jpg)
Second Pic... Other side after polishing with metal polish....
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140301_210149_zpsxv1uqira.jpg)
Not sure if my camera skills can show the difference.. But it does polish up nice.
-
Nah brother.. I was trying to figure it out myself.
These pictures have not be altered in any way...
First Pic.... OHT straight out the box...
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140301_210157_zpsolkqxdnm.jpg)
Second Pic... Other side after polishing with metal polish....
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/20140301_210149_zpsxv1uqira.jpg)
Not sure if my camera skills can show the difference.. But it does polish up nice.
I still like my brown one better :)
but not by much. That looks really nice Dale. Keep polishing. Its gonna turn out sweet :tu:
-
Thanks bro! I think my elbow is outta grease tho... Gonna have to continue in the am... :cheers:
-
Check this out Joel...
Out of box
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/668f19aa-252a-4e63-b5ba-2ab36ce6ec4f_zps85a6e60c.jpg)
Polished...
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140301_220059_zpseiqqo7z2.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/3d2ce468-d2fa-4710-a8aa-8a1019f798ea_zps1157f62c.jpg)
-
I'm liking it all polished up! :tu:
-
I'm liking it all polished up! :tu:
Me too!!
-
Check this out Joel...
Out of box
(http://i1252.photobucket.com/albums/hh571/ajones1051/Mobile%20Uploads/668f19aa-252a-4e63-b5ba-2ab36ce6ec4f_zps85a6e60c.jpg)
Polished...
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140301_220059_zpseiqqo7z2.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/3d2ce468-d2fa-4710-a8aa-8a1019f798ea_zps1157f62c.jpg)
Very Nice Dale.
-
Nice OHT :tu:, I like the polished look!
Here is my latest Leatherman. I have no intentions of actually using this one since the paint is so delicate on these Skeletools. None the less, it's driving me crazy keeping it in the package :poh:
-
.... it's driving me crazy keeping it in the package :poh:
Nice red one :tu: But you must practise resisting the temptation ...... :pok:
-
Nice OHT :tu:, I like the polished look!
Here is my latest Leatherman. I have no intentions of actually using this one since the paint is so delicate on these Skeletools. None the less, it's driving me crazy keeping it in the package :poh:
its not like its latex paint.
you can carry and use it.
you just got to baby it or you'll scratch it up.
Use it bdAmmo just be a little careful.
-
Nice OHT :tu:, I like the polished look!
Here is my latest Leatherman. I have no intentions of actually using this one since the paint is so delicate on these Skeletools. None the less, it's driving me crazy keeping it in the package :poh:
its not like its latex paint.
you can carry and use it.
you just got to baby it or you'll scratch it up.
Use it bdAmmo just be a little careful.
Or get a second one to use and keep the first in the package... :pok: :D
-
The finished product
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140302_085525_zps6qo11rze.jpg)
-
The finished product
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140302_085525_zps6qo11rze.jpg)
Shiny!!! :gimme:
-
Nice OHT :tu:, I like the polished look!
Here is my latest Leatherman. I have no intentions of actually using this one since the paint is so delicate on these Skeletools. None the less, it's driving me crazy keeping it in the package :poh:
Very nice tool. I would never manage to keep in the package tough. No fiddling, no fun ! >:D
-
That silver OHT is looking good Dale :tu:
-
That silver OHT is looking good Dale :tu:
:cheers:
-
That silver OHT is looking good Dale :tu:
:cheers:
I'm not a fan of the OHT,but that looks sweet!
-
I just acquired a Micra in a trade. I am really surprised how much utility is packed into this little package.
-
That silver OHT is looking good Dale :tu:
:cheers:
I'm not a fan of the OHT,but that looks sweet!
Thanks Kirk!
-
New company policy: Every employee shall EDC a MT.
That day has come.
All employees will receive Rebar / Micra combo or SD Classic, today.
-
New company policy: Every employee shall EDC a MT.
That day has come.
All employees will receive Rebar / Micra combo or SD Classic, today.
:tu:
-
Im sure your employees must really like you! :tu:
-
As long as these are NOT funded by the profit sharing program. ;)
-
It's not a whole new tool, but I got my bit kit and driver extender for my Wave (which I've been carrying for the past week instead of the Blast).
The driver extender doesn't lock into the tool like the bits do, which is a bit smurf as it just falls out if you turn it upside down. But now I can use all the bits I already have in my toolbox so that's a plus.
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/9D0140A0-E57D-4489-88C4-A7223B560B40_zpspniqfbes.jpg)
The bit adapter is on its way for my Blast too :) looks like I can take all the screwdrivers out of my truck toolbox now.
-
Just got a very nice 1999 flair! Very snazy. :multi:
-
Just got a very nice 1999 flair! Very snazy. :multi:
Ya got anymore snazzy tools? :pok: Welcome to the forum.
-
You bunch of enablers got me into buying Multitools. Tried a crappy Ganzo 2020 and was underwhelmed so I said I'd try a "real" one this time.
Got this for 6 Euros shipped :o so couldn't pass it by.
(http://i60.tinypic.com/2rzxq3t.jpg)
Didn't know what's with all the fuss about Leatherman but it's a darned nice toy... solid, strong, easy to open, nice tools, feels great in hand. I also looove the locking system (despite Googling for 30 minutes on how to unlock the tools and almost blocking the whole thing :whistle: ) I love how smooth and strong is.
After a nice wash in warm soapy water and some passes through the Vic Sharpener it feels like new. It all seems really nice - I'll test out later the file on a tiny padlock whose key I misplaced ages ago :-[ )
So officially I'm a Leatherman convert.. just keep me away from this forum as I already have 5 saks on my shopping list and I'm soo poor ... well who needs food when you have :multi:
-
It's not a whole new tool, but I got my bit kit and driver extender for my Wave (which I've been carrying for the past week instead of the Blast).
The driver extender doesn't lock into the tool like the bits do, which is a bit smurf as it just falls out if you turn it upside down. But now I can use all the bits I already have in my toolbox so that's a plus.
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/9D0140A0-E57D-4489-88C4-A7223B560B40_zpspniqfbes.jpg)
The bit adapter is on its way for my Blast too :) looks like I can take all the screwdrivers out of my truck toolbox now.
Mine fits pretty snug, diffidently does not fall out when upside down.
-
So officially I'm a Leatherman convert.. just keep me away from this forum as I already have 5 saks on my shopping list and I'm soo poor ... well who needs food when you have :multi:
6 Euro? That was a steal. That's the same model as my brothers one. Nice one.
-
So officially I'm a Leatherman convert.. just keep me away from this forum as I already have 5 saks on my shopping list and I'm soo poor ... well who needs food when you have :multi:
6 Euro? That was a steal. That's the same model as my brothers one. Nice one.
An original Supertool for €6? Nice one! It's a helluva tool
-
Just a few, and thanks for the warm welcome!
Just got a very nice 1999 flair! Very snazy. :multi:
Ya got anymore snazzy tools? :pok: Welcome to the forum.
-
So officially I'm a Leatherman convert.. just keep me away from this forum as I already have 5 saks on my shopping list and I'm soo poor ... well who needs food when you have :multi:
6 Euro? That was a steal. That's the same model as my brothers one. Nice one.
An original Supertool for €6? Nice one! It's a helluva tool
Yap, I was lucky that the seller didn't know what he was selling... he sold a bunch of saks and sak-alikes... same 4 Euros for either a Vic Climber of a Chinese knock-off. This one he advertised as "multifunc. pliers" no mention of "Leatherman" or "multitool" anywhere... normally used Leatherman STs go here for 50-60 Euros...
-
Just realized I never posted a pic of my newest. It's all I've been carrying since I got it. It's so freakin thin.
-
Factory new Mini, saw it on a shelf in a Hardware-store, probably been sitting there for a long time :D
-
Factory new Mini, saw it on a shelf in a Hardware-store, probably been sitting there for a long time :D
Nice score! :tu:
I'm surprised it hung around that long. None of my local stores have been around long enough to have even stocked a Mini, let alone have it waiting on a shelf for me to find it.
-
Factory new Mini, saw it on a shelf in a Hardware-store, probably been sitting there for a long time :D
Good find! :tu:
-
Factory new Mini, saw it on a shelf in a Hardware-store, probably been sitting there for a long time :D
Yeah, maybe I should check out some local hardware stores. That just looks like something that could sit on a shelf around here for years collecting dust, just waiting for someone like me to grab it up :D
-
Congrats, Beat. :cheers:
I'm waiting on one myself. What are the date codes on it?
-
This MINI is the latest :)
-
That's a great looking Mini David :tu:
-
Factory new Mini, saw it on a shelf in a Hardware-store, probably been sitting there for a long time :D
Nice score! :tu:
I'm surprised it hung around that long. None of my local stores have been around long enough to have even stocked a Mini, let alone have it waiting on a shelf for me to find it.
I guess its because LM is one of the Off-Brands here. They are similar in price as the SwissTool / Swiss Tool Spirit, so they have stiff competition. Adding to this that we pride ourselves in the quality of our Swiss Army knife and are reluctant to change.
Congrats, Beat. :cheers:
I'm waiting on one myself. What are the date codes on it?
Both are 0102, it also came with a contest that ended in 2003 :rofl:
-
That's a great looking Mini David :tu:
Thank you bdA. This one has the usual stamping on the front but none on the back side. First one I've had like that. I really like the older style sheath that came with the older Leathermans. As you proably already know by the plier head stamps this is a no date MINI. :)
-
Congrats, Beat. :cheers:
I'm waiting on one myself. What are the date codes on it?
Both are 0102, it also came with a contest that ended in 2003 :rofl:
Thought it might have been a later one.
Nice birthday present to yourself. :D
Happy belated birthday btw. :cheers:
(http://upload.wikimedia.org/wikipedia/commons/thumb/8/8d/Nuvola_cake_5.svg/128px-Nuvola_cake_5.svg.png)
------------------------------
Does anyone have a timeline for LM packaging? When which box was used on the older models?
-
The mail man brought my BO Wave today and it is AWESOME!!! :ahhh :ahhh :ahhh :ahhh :D :multi:
-
The mail man brought my BO Wave today and it is AWESOME!!! :ahhh :ahhh :ahhh :ahhh :D :multi:
Very nice! :tu:
-
02/98 matching numbers Sideclip from our own Lowtech :tu:
This ones due to see a bit of modding to full UK legal :dd:
-
Congrats, Beat. :cheers:
I'm waiting on one myself. What are the date codes on it?
Both are 0102, it also came with a contest that ended in 2003 :rofl:
Thought it might have been a later one.
Nice birthday present to yourself. :D
Happy belated birthday btw. :cheers:
(http://upload.wikimedia.org/wikipedia/commons/thumb/8/8d/Nuvola_cake_5.svg/128px-Nuvola_cake_5.svg.png)
------------------------------
Does anyone have a timeline for LM packaging? When which box was used on the older models?
Thanks, best part, I didn't have to pay for it :D
-
Got my Mini in. This one has the old plir head stamp but no date codes.
I should know this :doh: but when did LM start adding date codes?
-
I just recenty won an Ebay lot, that had Rebar, Squirt ps4 and Squirt s4 in it.
Rebar is quite stiff and dirty, but not much used. Ps4 has little dent on blade and some wear on scales, other than that tools have seen only little use. S4 seems to need little sharpening on scissors, other than that, just scale wear. All need some loving and soap water. For now, i need some of that too. Been sick for last three days. This sucks all juices out of me. When i feel little better, i will clean them.
First thoughts on Rebar was not so impressed. Tiny little bugger. Anyone want to sell me ST300?
-
First thoughts on Rebar was not so impressed. Tiny little bugger. Anyone want to sell me ST300?
Hope you start feeling better soon.
If you want a bigger MT you don't need an ST300, you need a West Marine Blacktip (by SOG) :pok: :rofl:
-
First thoughts on Rebar was not so impressed. Tiny little bugger. Anyone want to sell me ST300?
Hope you start feeling better soon.
If you want a bigger MT you don't need an ST300, you need a West Marine Blacktip (by SOG) :pok: :rofl:
Thanks. I do feel little better. I did some cleaning and oiling already on Squirts. Left rebar last. Just to get private time with it. And to get knowing it better.
Not bad of a tool. It has potential. Longer blades, and replace those fishing implements, and why not...
-
Got my NIB BO PST this morning :mail: It's not the pictured version I saw (stock photo, which had the "pivot out" drivers), but rather an older version. It has a date code of 0993 on one handle and 0893 on the other, and it appears to have the saber point blade, which I love :D It's very stiff, which is unusual in the PST's I've gotten so far, but that could be due to the age and BO coating? I'm in hopes it'll loosen up as I fiddle with it.
Overall I am pleased so far, but disappointed that it doesn't have the pivot out drivers as I really wanted that, but it was still a pleasant surprise that it was an older one with the saber point blade :D
-
Got my NIB BO PST this morning :mail: It's not the pictured version I saw (stock photo, which had the "pivot out" drivers), but rather an older version. It has a date code of 0993 on one handle and 0893 on the other, and it appears to have the saber point blade, which I love :D It's very stiff, which is unusual in the PST's I've gotten so far, but that could be due to the age and BO coating? I'm in hopes it'll loosen up as I fiddle with it.
Overall I am pleased so far, but disappointed that it doesn't have the pivot out drivers as I really wanted that, but it was still a pleasant surprise that it was an older one with the saber point blade :D
I actually prefer the old style drivers. :salute: :D
-
Got my NIB BO PST this morning :mail: It's not the pictured version I saw (stock photo, which had the "pivot out" drivers), but rather an older version. It has a date code of 0993 on one handle and 0893 on the other, and it appears to have the saber point blade, which I love :D It's very stiff, which is unusual in the PST's I've gotten so far, but that could be due to the age and BO coating? I'm in hopes it'll loosen up as I fiddle with it.
Overall I am pleased so far, but disappointed that it doesn't have the pivot out drivers as I really wanted that, but it was still a pleasant surprise that it was an older one with the saber point blade :D
I actually prefer the old style drivers. :salute: :D
Really? Interesting...why is that? Maybe you can sway me that way as well ;)
-
Whats the difference in the drivers? Anyone have pictures of the different types? :think:
It is the non cap crimper version right?
-
Whats the difference in the drivers? Anyone have pictures of the different types? :think:
It is the non cap crimper version right?
Yes, it is the non cap crimper version. The "pivot out" drivers were an improvement implemented sometime in the late 90's or around 2000, but anyone correct me if I'm wrong as I'm not totally sure on that. It just made it less likely that they would fold in when in use. I don't have any pics comparing them myself, but I'm sure someone does.
Overall I suppose it's not really a big deal considering my amount of use. I just wanted a version with those improved drivers to see what they're like. Oh well, I got a brand new, 21 year old BO PST for a good price, so I can't complain about that at all :tu:
-
Thanks Monrogue. :tu:
Im not concerned about the drivers as I'm not going to use mine but was just interested as I had not heard of the change in the drivers before. Admittedly I had never done any research on it either. Thanks again. :tu:
-
Whats the difference in the drivers? Anyone have pictures of the different types? :think:
It is the non cap crimper version right?
Yes, it is the non cap crimper version. The "pivot out" drivers were an improvement implemented sometime in the late 90's or around 2000, but anyone correct me if I'm wrong as I'm not totally sure on that. It just made it less likely that they would fold in when in use. I don't have any pics comparing them myself, but I'm sure someone does.
Overall I suppose it's not really a big deal considering my amount of use. I just wanted a version with those improved drivers to see what they're like. Oh well, I got a brand new, 21 year old BO PST for a good price, so I can't complain about that at all :tu:
I just prefer the way certain drivers are accessed on the old style as opposed to the latter ones...
-
Thanks Monrogue. :tu:
Im not concerned about the drivers as I'm not going to use mine but was just interested as I had not heard of the change in the drivers before. Admittedly I had never done any research on it either. Thanks again. :tu:
No problem buddy, glad to help :tu:
-
Here are some pics of my new BO PST:
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140311_151932_250_zpse805c8cb.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140311_151932_250_zpse805c8cb.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/ec3ed5c5-86fd-44a4-9b08-7396e680dbe2_zps56f39012.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/ec3ed5c5-86fd-44a4-9b08-7396e680dbe2_zps56f39012.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140311_152142_115_zps06448a4f.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140311_152142_115_zps06448a4f.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140311_152251_230_zps69aaf708.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140311_152251_230_zps69aaf708.jpg.html)
-
Nice Kyle. I cant wait to get mine.
-
Nice Kyle. I cant wait to get mine.
Same. :mail:
-
Nice Kyle. I cant wait to get mine.
Same. :mail:
I can't wait to see what you guys get as well. I'm curious as to what year/version you get, and if it's the same as mine.
-
Mmmmm, BO PST!!! I should have one too. Some day.
Sent from my iPhone 5 using Tapatalk
-
Here are some pics of my new BO PST:
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140311_151932_250_zpse805c8cb.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140311_151932_250_zpse805c8cb.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/ec3ed5c5-86fd-44a4-9b08-7396e680dbe2_zps56f39012.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/ec3ed5c5-86fd-44a4-9b08-7396e680dbe2_zps56f39012.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140311_152142_115_zps06448a4f.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140311_152142_115_zps06448a4f.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140311_152251_230_zps69aaf708.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140311_152251_230_zps69aaf708.jpg.html)
Great tool! I've been really close to buying a BO PST a couple of times. I think I'll stick to ss ones for now though. I can't bring myself to scratch the BO on older tools.
-
Great tool! I've been really close to buying a BO PST a couple of times. I think I'll stick to ss ones for now though. I can't bring myself to scratch the BO on older tools.
Well they come pretty well looking scratched right out of the box, but that's just the way BO seems to look in my limited experience. My BORebar looked the same before any carry/use. Of course, you probably mean actually scratching the BO off I'm assuming...
-
Great tool! I've been really close to buying a BO PST a couple of times. I think I'll stick to ss ones for now though. I can't bring myself to scratch the BO on older tools.
Well they come pretty well looking scratched right out of the box, but that's just the way BO seems to look in my limited experience. My BORebar looked the same before any carry/use. Of course, you probably mean actually scratching the BO off I'm assuming...
Yeah even without use simple things like just opening and closing the pliers can rub on the BO. I'll probably give in eventually though. After all they are tools and meant to be used.
-
Great tool! I've been really close to buying a BO PST a couple of times. I think I'll stick to ss ones for now though. I can't bring myself to scratch the BO on older tools.
Well they come pretty well looking scratched right out of the box, but that's just the way BO seems to look in my limited experience. My BORebar looked the same before any carry/use. Of course, you probably mean actually scratching the BO off I'm assuming...
Yeah even without use simple things like just opening and closing the pliers can rub on the BO. I'll probably give in eventually though. After all they are tools and meant to be used.
Yeah, I've noticed in on the pliers on the PST, but it's really tight on one handle in particular. I'm not sure if the BO coating contributes to the tight/stiff feeling, but any other PST I have has been loose and smooth opening. And yes, if you allow us, we'll play the role of enablers until you cave and get one :pok: >:D
-
Just got my BO PST and it's just what I was hoping for. Old style tools with dates 0693 and 0993.
-
Just got my BO PST and it's just what I was hoping for. Old style tools with dates 0693 and 0993.
Awesome, I'm glad it's what you wanted man :tu: So how does it feel/operate? Is it stiff?
-
Just got my BO PST and it's just what I was hoping for. Old style tools with dates 0693 and 0993.
Awesome, I'm glad it's what you wanted man :tu: So how does it feel/operate? Is it stiff?
The pliers are a little stiff but not the tools.
-
Just got my BO PST and it's just what I was hoping for. Old style tools with dates 0693 and 0993.
Awesome, I'm glad it's what you wanted man :tu: So how does it feel/operate? Is it stiff?
The pliers are a little stiff but not the tools.
Right, I should clarify that I was primarily referring to the pliers/handles being stiff, but the tools themselves seem normal based on my other PSTs. Perhaps the ones I already have were loosened up as they were used. However, my PSTII was brand new in the package and was smooth as well. I'm hoping it loosens up with time and fiddling, which I've been doing as much as I can.
-
It's been a while since I've posted in this thread, but thanks to some birthday money and Captain Spaulding.......
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2255_zps5de9c79d.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2255_zps5de9c79d.jpg.html)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2254_zps43b52c4f.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2254_zps43b52c4f.jpg.html)
Charge ALX. :D Used but in great shape. Gonna take it to work tomorrow. :tu:
-
:multi:
-
It's been a while since I've posted in this thread, but thanks to some birthday money and Captain Spaulding.......
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2255_zps5de9c79d.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2255_zps5de9c79d.jpg.html)
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2254_zps43b52c4f.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2254_zps43b52c4f.jpg.html)
Charge ALX. :D Used but in great shape. Gonna take it to work tomorrow. :tu:
Congrats!
I love the way the AL/ALX look. Possibly the best looking Leatherman in my opinion. My AL is on its way over from the states at the moment. Really looking forward to getting it. Lighter and prettier than the wave.
I don't quite understand the ALX because why would you want two drivers instead of one with scissors when the drivers have removable bits anyway? Each to their own!
-
I used to own an ALX and loved it but nowadays I desire the scissors so I would want an AL.
-
I've always got either an Executive or a Rambler on my keys, so scissors are covered. Quicker to get to as well. :) I've already had to use both a flat and Phillips driver this morning on the same task, so not having to switch out a bit was a little plus. :tu: Alternatively, I'll keep a combo flat/Phillips in one driver, and a Torx in the other for shaker maintenance.
And I do owe the Cap'n an apology - this ALX is new, not used. I was just assuming it was lightly used since he gave me such a sweet deal on it! :tu:
-
I've always got either an Executive or a Rambler on my keys, so scissors are covered. Quicker to get to as well. :) I've already had to use both a flat and Phillips driver this morning on the same task, so not having to switch out a bit was a little plus. :tu: Alternatively, I'll keep a combo flat/Phillips in one driver, and a Torx in the other for shaker maintenance.
I wasn't in any way bashing the ALX. In fact, the double flat and Philips bits are one thing I like about it. That's the same thing I like most about the Skeletool. :salute:
-
I don't quite understand the ALX because why would you want two drivers instead of one with scissors when the drivers have removable bits anyway? Each to their own!
My first Leatherman was an XTi with the dual large bit drivers. With the two drivers, I could have one equipped with the Phillips/Flat combo bit and the other with the dual Robertson bits (we have a lot of these screws in Canada). This meant that I could pocket carry with a clip instead of carrying a pouch with the other bits or having them in my pocket. Since I always had a Micra on the keys, my scissors needs were covered.
Nowadays my go to Leatherman is a ReCharge TTi with single bit driver since I pouch carry as I find I need more than 2 extra bits and they are easy to store in the card in the pouch.
-
received a new leather rebar ss in the post today as a replacement for a damaged blast.
i also received a mint skeletool CX from a trade with bdAmmo. thanks dude, its awesome :tu: :salute:
-
Japanese PST!!! :drool:
-
Japanese PST!!! :drool:
Pics :pok: :drool:
-
The new old stock black oxide PST arrived. Dated 0793 on one handle. No date on the knife side of the handle. The sheath and box are just as exciting as the tool. That NIB feeling never gets old. I'll get pics up when I can. Flickr is being a douche.
-
The new old stock black oxide PST arrived. Dated 0793 on one handle. No date on the knife side of the handle. The sheath and box are just as exciting as the tool. That NIB feeling never gets old. I'll get pics up when I can. Flickr is being a douche.
Nice, can't wait to see it Ben :tu: I know what you mean about opening up that old box and seeing that brand new sheath with the goodie inside :D
-
Its like opening a little Leatherman time capsule. :tu:
-
I just got this beauty
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182203.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182203.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182219.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182219.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182231.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182231.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182253.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182253.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182344.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182344.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182351.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182351.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182421.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182421.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182444.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182444.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182454.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182454.jpg.html)
I do not think the file was ever used
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182533.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182533.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182553.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182553.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Japanese%20PST/20140313_182714.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Japanese%20PST/20140313_182714.jpg.html)
-
That is a beautiful JPST :tu: congrats!
-
Here it is. Next to the used PST. On top of this hideous NAPA cloth.
-
Nice Ben :tu: How does yours operate in terms of smoothness/stiffness?
-
Folding the pliers out, very stiff. Tool/knife deployment is tight and clumpy. The way I prefer it. I like the grainy finish of the black oxide on this old PST. Nowhere as refined as the newer black oxide finish on LM tools. (not that its that its all that more refined) Another plus is the sheath with the leather swatch over the rivets inside the sheath. Small things like that go a long way for me. I lucked out buying a few of the old PST sheaths off ebay and one came with the leather swatch. Something Leatherman should still be doing. Or at least an option when buying a box leather sheath off the LM site.
The knife blade came made for bread and butter duty. Other than that I couldn't ask for any more out of the new old PST.
-
Folding the pliers out, very stiff. Tool/knife deployment is tight and clumpy. The way I prefer it. I like the grainy finish of the black oxide on this old PST. Nowhere as refined as the newer black oxide finish on LM tools. (not that its that its all that more refined) Another plus is the sheath with the leather swatch over the rivets inside the sheath. Small things like that go a long way for me. I lucked out buying a few of the old PST sheaths off ebay and one came with the leather swatch. Something Leatherman should still be doing. Or at least an option when buying a box leather sheath off the LM site.
The knife blade came made for bread and butter duty. Other than that I couldn't ask for any more out of the new old PST.
Mine was too, but I've worked at it enough repeatedly until it smoothened out to my liking. However, the plier head itself isn't as loose in opening as I'd like, but I'm hoping it will do the same with repeated opening/closing. Glad you like yours too. It is a heck of a deal at that price :tu:
-
A nice old Mini Tool showed up today :woohoo: Thanks for the help tracking this one down gregozedobe :salute:
Here is a quick picture, it looks like it will clean up just fine.
(http://i971.photobucket.com/albums/ae191/bdAmmo/image_zpsfc4f745e.jpg) (http://s971.photobucket.com/user/bdAmmo/media/image_zpsfc4f745e.jpg.html)
-
Nice MINI Pat!
Sent from my RM-845_nam_vzw_100 using Tapatalk
-
Got my NIB BO PST! :ahhh
0893 - 0993 dates on handles.
-
Got my NIB BO PST! :ahhh
0893 - 0993 dates on handles.
Sweet :tu:
-
Got my NIB BO PST! :ahhh
0893 - 0993 dates on handles.
Cool!
Sent from my RM-845_nam_vzw_100 using Tapatalk
-
Got my NIB BO PST! :ahhh
0893 - 0993 dates on handles.
Nice Cap, and the same date codes as mine :tu: How are you liking it? Yes, I know, silly question right ::)
-
Got my NIB BO PST! :ahhh
0893 - 0993 dates on handles.
Nice Cap, and the same date codes as mine :tu: How are you liking it? Yes, I know, silly question right ::)
I love it, but sadly its not going to be a user.
-
Got my NIB BO PST! :ahhh
0893 - 0993 dates on handles.
Nice Cap, and the same date codes as mine :tu: How are you liking it? Yes, I know, silly question right ::)
I love it, but sadly its not going to be a user.
Right, but at least you can fiddle with it. That's basically what I do with mine, although I will use it if the need arises.
-
If you do end up using the can opener let me know how it works out. Out of all the MT can openers I have used I have yet to ever use the PST or "old style" can opener.
-
If you do end up using the can opener let me know how it works out. Out of all the MT can openers I have used I have yet to ever use the PST or "old style" can opener.
I'll have to make it a point to use it sometime. I rarely open cans as most have the pull top now. I do occasionally come across a can without that though, and will have to try to remember to use it. Any excuse to use our MTs right? ;)
-
If you do end up using the can opener let me know how it works out. Out of all the MT can openers I have used I have yet to ever use the PST or "old style" can opener.
I'll have to make it a point to use it sometime. I rarely open cans as most have the pull top now. I do occasionally come across a can without that though, and will have to try to remember to use it. Any excuse to use our MTs right? ;)
Right! :D
-
If you do end up using the can opener let me know how it works out. Out of all the MT can openers I have used I have yet to ever use the PST or "old style" can opener.
I'll have to make it a point to use it sometime. I rarely open cans as most have the pull top now. I do occasionally come across a can without that though, and will have to try to remember to use it. Any excuse to use our MTs right? ;)
Right! :D
Yup. :tu:
-
I scored sne days ago a BO Kick with belt clip 21$ shipped and a BO Fuse 26$ shipped , both in mint condition
ΜΟΛΩΝ ΛΑΒΕ......
-
I scored sne days ago a BO Kick with belt clip 21$ shipped and a BO Fuse 26$ shipped , both in mint condition
ΜΟΛΩΝ ΛΑΒΕ......
Very nice!
I'm wanting a Fuse at some point as I have the kick and blast. They want about 85USD for a stainless fuse here, and 50USD for a kick… so I think I might wait and get one from the states.
Great bargain you got there.
-
Very nice!
I'm wanting a Fuse at some point as I have the kick and blast. They want about 85USD for a stainless fuse here, and 50USD for a kick… so I think I might wait and get one from the states.
Great bargain you got there.
I live in Athens Greece and there is absolutely no way to find such tool around here. So I got them from US eBay and shipped them to a friend who lives in the USA. When my mate flew to Greece, brought them with him
ΜΟΛΩΝ ΛΑΒΕ......
-
This Multi Tool thing is a slippery slope. I just bought two broken Waves off ebay. I live near the repair centre in Canada. I'll take them there ASAP. Also bought a 200 NIB. Summer work is about to start and the pay is much better. Someone help me!!!
BP
-
My latest is a new wave, that I got from a friend of mine. now its my spartime carry :multi:
-
This Multi Tool thing is a slippery slope. I just bought two broken Waves off ebay. I live near the repair centre in Canada. I'll take them there ASAP. Also bought a 200 NIB. Summer work is about to start and the pay is much better. Someone help me!!!
BP
Ha, sorry my friend, you'll get very little help here, or at least not the help you're talking about ;) There are plenty of folks here that will "help" you....help you burn that extra summer pay that is >:D
-
Dale made me buy a rebar it will be here Thursdayish :mail: can't wait I'll just put a tent up next to my mailbox.
-
I bought another Rebar yesterday... :facepalm:
-
I bought another Rebar yesterday... :facepalm:
Another one :o You'll have quite a collection of those if you keep this up buddy ;)
-
I bought another Rebar yesterday... :facepalm:
Another one :o You'll have quite a collection of those if you keep this up buddy ;)
I just can't turn them down when I see them brand new in their brand new shiny package. I need to stop going to stores that sell them. :multi: :whistle:
-
I bought another Rebar yesterday... :facepalm:
Another one :o You'll have quite a collection of those if you keep this up buddy ;)
I just can't turn them down when I see them brand new in their brand new shiny package. I need to stop going to stores that sell them. :multi: :whistle:
How many do you have now? I've never seen a rebar in a store what stores have you seen them in?
-
I bought another Rebar yesterday... :facepalm:
Another one :o You'll have quite a collection of those if you keep this up buddy ;)
I just can't turn them down when I see them brand new in their brand new shiny package. I need to stop going to stores that sell them. :multi: :whistle:
I'm lucky in that sense because there's nothing near my area that sells any MTs/SAKs. Closest is a Walmart about an hour away, and they don't sell much of anything I care to have, or don't already have. Ebay is bad though >:D
-
I bought it at Walmart and this makes 7.
-
I bought it at Walmart and this makes 7.
Keep it up and you'll be able to write REBAR with them. >:D
(http://i785.photobucket.com/albums/yy135/turnsouth/LM%20Tools/P8210046.jpg)
-
I bought it at Walmart and this makes 7.
Keep it up and you'll be able to write REBAR with them. >:D
(http://i785.photobucket.com/albums/yy135/turnsouth/LM%20Tools/P8210046.jpg)
:o :ahhh
-
Man I hope to get a core one day it's just one of those things that slips out of my fingers when I think I'm about to reel it in.
-
Just picked up an OHT in Coyote Tan. :multi:
-
I hear you. The Core gave me the impression that it never was a very popular tool for Leatherman. Mind you, with that said, I am still on the lookout for a piece of unobtaininum, the Stainless Core with the cap crimper plier head.
-
Fuse for the lighter days
(http://img.tapatalk.com/d/14/03/19/2yhysevy.jpg)
Swiss Army knives .
-
Fuse for the lighter days
(http://img.tapatalk.com/d/14/03/19/2yhysevy.jpg)
Swiss Army knives .
Nice! :cheers:
-
Another Flair!¡! :D
-
Another Flair!¡! :D
:tu: will that be your 3rd Flair?
-
I hear you. The Core gave me the impression that it never was a very popular tool for Leatherman. Mind you, with that said, I am still on the lookout for a piece of unobtaininum, the Stainless Core with the cap crimper plier head.
I've never seen or heard of one. If they exist they are a very rare bird.
-
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140320_175444_zpspiz7f5jc.jpg)
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140319_175406_zpsejjkmiva.jpg)
-
All these Surge pictures and Surge talk makes me want one BAAAADDDD!
-
All these Surge pictures and Surge talk makes me want one BAAAADDDD!
They are heavu duty! You should get one!!
-
Not that I'm complaining but I wonder why the Surge costs so much more than the Wave. It's just a little bit more metal involved... thoughts?
-
All these Surge pictures and Surge talk makes me want one BAAAADDDD!
They are heavu duty! You should get one!!
No funds, plus I don't really need one. I might try and trade for one or just live vicariously through your pictures. :D
-
I'm still not sold because of the added size. Same reason I no longer own any ST300's. They were just too bulky.
-
Not that I'm complaining but I wonder why the Surge costs so much more than the Wave. It's just a little bit more metal involved... thoughts?
More metal, different size/type components that are unique to that model?
More probable is branding: 'It's bigger, so we can sell it for more.'
The ST300 is more than the Rebar, so it kind of makes sense. I guess it depends on how much different the price is. Up here a Rebar will put you back about ~$50 brand new and an ST300 ~$80. The Wave retails in the ~$90 and the new Surge for ~$100 (all models SS, prices approx, can be found for less depending on store).
-
I'm still not sold because of the added size. Same reason I no longer own any ST300's. They were just too bulky.
I liked the ST300, but it's not practical for carry for me. I do have one in my car though. Seems the only real practical option for me and the ST300.
-
PST II before it said PST II
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/20140320_181852.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/20140320_181852.jpg.html)
-
I have one as well not marked PST II. What are your date codes?
Mine is 0397 - 0996
-
Not that I'm complaining but I wonder why the Surge costs so much more than the Wave. It's just a little bit more metal involved... thoughts?
I have wondered this myself..Added size, interchangeable saw blade.. not sure
-
I have one as well not marked PST II. What are your date codes?
Mine is 0397 - 0996
0698/0798
-
I have one as well not marked PST II. What are your date codes?
Mine is 0397 - 0996
0698/0798
Thanks. :tu:
-
I'm still not sold because of the added size. Same reason I no longer own any ST300's. They were just too bulky.
Same here. I like the looks of the Surge, but if it weighs a few ounces more than the typical multitools I own, then that's just too much.
-
I have one as well not marked PST II. What are your date codes?
Mine is 0397 - 0996
0698/0798
I have one too, with 0997 on both handles.
-
I have one as well not marked PST II. What are your date codes?
Mine is 0397 - 0996
0698/0798
I have one too, with 0997 on both handles.
Thanks. Seems at least a three year run of these from the info from just the three of us.
-
Might have another original supertool on the way.
-
My Skeletool showed up today :mail:
(http://i971.photobucket.com/albums/ae191/bdAmmo/image_zpsf4f5286f.jpg) (http://s971.photobucket.com/user/bdAmmo/media/image_zpsf4f5286f.jpg.html)
-
My youngest daughter's Flair came in today.
-
My Skeletool showed up today :mail:
(http://i971.photobucket.com/albums/ae191/bdAmmo/image_zpsf4f5286f.jpg) (http://s971.photobucket.com/user/bdAmmo/media/image_zpsf4f5286f.jpg.html)
Oh that looks nice! :tu:
-
Thanks Capt :salute:
-
I got a unused Wave with sheath at a Pawn shop for $25. I'll give it to by brother since I already have 3.
-
Juice S2
-
Got a BO PST and a camo Fuse over the weekend.
Both seem like great tools but the Fuse feels better in hand so far but I am sure that is because I carried a Blast for years.
I will have to give the PST a chance to see what it is capable of.
Sent from my fancy work phone.
-
Got a BO PST and a camo Fuse over the weekend.
Both seem like great tools but the Fuse feels better in hand so far but I am sure that is because I carried a Blast for years.
I will have to give the PST a chance to see what it is capable of.
Sent from my fancy work phone.
Nice Leathermans :tu:
-
Got a BO PST and a camo Fuse over the weekend.
Both seem like great tools but the Fuse feels better in hand so far but I am sure that is because I carried a Blast for years.
I will have to give the PST a chance to see what it is capable of.
Sent from my fancy work phone.
:drool: :drool:
Both are beauties! :tu:
-
Thanks guys.
The PST is a nos off that eBay guy and the Fuse looks to be in new shape also.
I can be rough on my stuff so it slightly pains me to use old tools in such nice condition but that is what they are made for so I will have at em.
Sent from my fancy work phone.
-
I hear you. The Core gave me the impression that it never was a very popular tool for Leatherman. Mind you, with that said, I am still on the lookout for a piece of unobtaininum, the Stainless Core with the cap crimper plier head.
I've never seen or heard of one. If they exist they are a very rare bird.
How common is the BO Core with CC ? There's a "new" one on offer on ebay Oz of $Au 79.99 at the moment
-
I hear you. The Core gave me the impression that it never was a very popular tool for Leatherman. Mind you, with that said, I am still on the lookout for a piece of unobtaininum, the Stainless Core with the cap crimper plier head.
I've never seen or heard of one. If they exist they are a very rare bird.
How common is the BO Core with CC ? There's a "new" one on offer on ebay Oz of $Au 79.99 at the moment
I'd say BO CC Cores are fairly common, I've seen several come up on ebay.
-
I got a brand new Orange Fuse and a NIB SS PST. :D
-
I got a brand new Orange Fuse and a NIB SS PST. :D
:2tu:
-
I got a brand new Orange Fuse and a NIB SS PST. :D
:2tu:
Ya, I like the mid to early 90's models as they have the type drivers I desire. I have 3 (one BO in those) like that so far. I saw a riveted PST at a pretty good price but figured although it's highly collectible, it could never be tightened if needed.
-
I got a brand new Orange Fuse and a NIB SS PST. :D
:2tu:
Ya, I like the mid to early 90's models as they have the type drivers I desire. I have 3 (one BO in those) like that so far. I saw a riveted PST at a pretty good price but figured although it's highly collectible, it could never be tightened if needed.
And you got the Fuse with a headlamp, right?
-
I got a brand new Orange Fuse and a NIB SS PST. :D
:2tu:
Ya, I like the mid to early 90's models as they have the type drivers I desire. I have 3 (one BO in those) like that so far. I saw a riveted PST at a pretty good price but figured although it's highly collectible, it could never be tightened if needed.
And you got the Fuse with a headlamp, right?
Yes I did in fact. It's a cool lamp though I'm not sure when I will use it.
-
A "new" to me Mini Tool. I like it so far, it's quite a bit more comfortable to use then my PSTII. Also I bet it will team-up with a SAK like a champion well.
(http://i1088.photobucket.com/albums/i330/Jetbo111/EDC%20Tools/IMG_0648_zps145762d7.jpg)
-
A "new" to me Mini Tool. I like it so far, it's quite a bit more comfortable to use then my PSTII. Also I bet it will team-up with a SAK like a champion well.
(http://i1088.photobucket.com/albums/i330/Jetbo111/EDC%20Tools/IMG_0648_zps145762d7.jpg)
Nice mini! :tu:
-
The Latest and greatest in the Leatherman line for me.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01447_zps9a09967c.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01447_zps9a09967c.jpg.html)
-
I got a user pst 2 today in a brown leather sheath :multi:
1998
-
I got a user pst 2 today in a brown leather sheath :multi:
1998
Nice Joel! :tu: The PST II is probably my favorite Leatherman.
-
I got a user pst 2 today in a brown leather sheath :multi:
1998
Nice Joel! :tu: The PST II is probably my favorite Leatherman.
thanks jersey
I think its a 2
I'm going to have to check the pst thread
-
I got a user pst 2 today in a brown leather sheath :multi:
1998
Nice Joel! :tu: The PST II is probably my favorite Leatherman.
thanks jersey
I think its a 2
I'm going to have to check the pst thread
It's got scissors?
-
I got a user pst 2 today in a brown leather sheath :multi:
1998
Nice Joel! :tu: The PST II is probably my favorite Leatherman.
thanks jersey
I think its a 2
I'm going to have to check the pst thread
It's got scissors?
nope its a pst
my bad
-
I got a user pst 2 today in a brown leather sheath :multi:
1998
Nice Joel! :tu: The PST II is probably my favorite Leatherman.
thanks jersey
I think its a 2
I'm going to have to check the pst thread
It's got scissors?
nope its a pst
my bad
Nothing bad about a PST mate :tu:
-
The Latest and greatest in the Leatherman line for me.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01447_zps9a09967c.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01447_zps9a09967c.jpg.html)
Best scissors based MT IMO.
-
I got a user pst 2 today in a brown leather sheath :multi:
1998
Nice Joel! :tu: The PST II is probably my favorite Leatherman.
thanks jersey
I think its a 2
I'm going to have to check the pst thread
It's got scissors?
nope its a pst
my bad
Nothing bad about a PST mate :tu:
I like it. :multi:
its been at least a decade since I owed one. My first multitool was a pst two and I keep getting them mixed up. :facepalm:
its been well used so Il keep on using it :)
-
The Latest and greatest in the Leatherman line for me.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01447_zps9a09967c.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01447_zps9a09967c.jpg.html)
Best scissors based MT IMO.
Yea the scissors ROCK!!! :tu:
-
BO ST 200 from Metro's sale thread. Sorry, no pics. It's currently getting a WD40 bath. :D
-
I can't remember what I've last posted here, anyhow, I've recently received a very nice early model PST NIB with leather sheath. I want one as a user but each 3 that I've bought so far are just too nice to use. I guess I'm just lucky that way. I've also gotten another BO Rebar, (ahh, I remember posting about the orange Fuse lately), a BO Wave on the way (hopefully today, if not Mon) and some bit extension kits for the Rebar. :D
-
I can't remember what I've last posted here, anyhow, I've recently received a very nice early model PST NIB with leather sheath. I want one as a user but each 3 that I've bought so far are just too nice to use. I guess I'm just lucky that way. I've also gotten another BO Rebar, (ahh, I remember posting about the orange Fuse lately), a BO Wave on the way (hopefully today, if not Mon) and some bit extension kits for the Rebar. :D
:hatsoff:
-
.... anyhow, I've recently received a very nice early model PST NIB with leather sheath. I want one as a user but each 3 that I've bought so far are just too nice to use. I guess I'm just lucky that way.
I can help you out, just send them on to me and I'll send some used later model ones you can really beat up on without worrying about. That should make you much happier ;) :pok: :rofl:
-
.... anyhow, I've recently received a very nice early model PST NIB with leather sheath. I want one as a user but each 3 that I've bought so far are just too nice to use. I guess I'm just lucky that way.
I can help you out, just send them on to me and I'll send some used later model ones you can really beat up on without worrying about. That should make you much happier ;) :pok: :rofl:
:facepalm:
-
.... anyhow, I've recently received a very nice early model PST NIB with leather sheath. I want one as a user but each 3 that I've bought so far are just too nice to use. I guess I'm just lucky that way.
I can help you out, just send them on to me and I'll send some used later model ones you can really beat up on without worrying about. That should make you much happier ;) :pok: :rofl:
:facepalm:
:rofl:
-
recently acquired a leatherman skeletool cx. So far I have been impressed with it. has a good weight for what it can do
GearsNTools:
https://www.youtube.com/user/gearsNtools
Current collection:
Skeletool CX
Juice S2
Charge TTI
Wave
SwissTool X
Surge - Old School
Surge - New
ST-300
-
Radio shack squirt and a S4
both areused and going to get used some more :multi:
-
I got a user pst 2 today in a brown leather sheath :multi:
1998
Nice Joel! :tu: The PST II is probably my favorite Leatherman.
thanks jersey
I think its a 2
I'm going to have to check the pst thread
It's got scissors?
nope its a pst
my bad
Nothing bad about a PST mate :tu:
I like it. :multi:
its been at least a decade since I owed one. My first multitool was a pst two and I keep getting them mixed up. :facepalm:
its been well used so Il keep on using it :)
They're still a class act. Maybe not perfect for heavy use,but still a great piece of kit
-
I got a BO Rebar, gonna swap the jaws on my BO Wave with it. (http://img.tapatalk.com/d/14/03/30/aba6y7e9.jpg)
Sent from my SCH-I605 using Tapatalk
-
I got a BO Rebar, gonna swap the jaws on my BO Wave with it. (http://img.tapatalk.com/d/14/03/30/aba6y7e9.jpg)
Sent from my SCH-I605 using Tapatalk
Super MT you got there! Best cutters available IMO and all the essential tools needed. :tu:
-
Juice s2, just seems kind of small, not sure if it will make the cut.
(http://img.tapatalk.com/d/14/04/02/nehe9u4u.jpg)
Swiss Army knives .
-
This :D :
http://www.ebay.com/itm/390785697629?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
-
Juice s2, just seems kind of small, not sure if it will make the cut.
(http://img.tapatalk.com/d/14/04/02/nehe9u4u.jpg)
Swiss Army knives .
Great picture. :tu:
-
@Colt, the S2 is smaller than I had estimated even after all the info on it. I like mine a lot when paired with my Explorer for a light day. The color wears a bit fast for my tastes but I guess that add character :think:. I find the pliers a nice size for most light to medium usage. The blade and scissors are very good and i like the philips. The can opener and flat drivers are OK. Hope you give this little tool a good work out and see if it can make the cut.
I got a Charge Ti today. Needs some lovin' and a good soak in WD40 and into the collection she goes. Pretty stoked right now.
-
@Colt, the S2 is smaller than I had estimated even after all the info on it. I like mine a lot when paired with my Explorer for a light day. The color wears a bit fast for my tastes but I guess that add character :think:. I find the pliers a nice size for most light to medium usage. The blade and scissors are very good and i like the philips. The can opener and flat drivers are OK. Hope you give this little tool a good work out and see if it can make the cut.
I got a Charge Ti today. Needs some lovin' and a good soak in WD40 and into the collection she goes. Pretty stoked right now.
Nice! The Ti is an excellent MT :cheers:
-
:salute: Thanks Dale, This is Date stamped 04-04 both handles with some light surface rusting throughout. The 154CM blade is in great shape and came with a nice old sheath.
-
:salute: Thanks Dale, This is Date stamped 04-04 both handles with some light surface rusting throughout. The 154CM blade is in great shape and came with a nice old sheath.
Nice score Aloha :tu: The Ti is one I wouldn't mind having as I think I prefer the full on serrated blade without the cutting hook.
This :D :
http://www.ebay.com/itm/390785697629?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Sweet score for you as well man :tu:
-
Its a pretty sweet LM and agreed on the hook.
-
I'm hoping our new honorable Chinese owners will put a stop to all this leatherman silliness
-
I'm hoping our new honorable Chinese owners will put a stop to all this leatherman silliness
:twak:
-
I'm hoping our new honorable Chinese owners will put a stop to all this leatherman silliness
:twak:
+1 :twak:
-
Besides he has his Asians mixed up.. It's the Japanese who are honorable, not the Chinese... :facepalm:
-
Besides he has his Asians mixed up.. It's the Japanese who are honorable, not the Chinese... :facepalm:
shows what I know.
not much. :rofl:
-
@Colt, the S2 is smaller than I had estimated even after all the info on it. I like mine a lot when paired with my Explorer for a light day. The color wears a bit fast for my tastes but I guess that add character :think:. I find the pliers a nice size for most light to medium usage. The blade and scissors are very good and i like the philips. The can opener and flat drivers are OK. Hope you give this little tool a good work out and see if it can make the cut.
I got a Charge Ti today. Needs some lovin' and a good soak in WD40 and into the collection she goes. Pretty stoked right now.
Congrats on the charge, that's on my list. I think the s2 will work out just fine for home or play. It s a keeper.
Swiss Army knives .
-
My twins ar here. Two Leatherman Freestyle, new in blister...
Does anyone have any experiences on these? Like to hear pros and cons...
-
My twins ar here. Two Leatherman Freestyle, new in blister...
Does anyone have any experiences on these? Like to hear pros and cons...
I had one, but I ended up selling it. I liked the initial idea of it as a decent little OHO blade and a set of pliers. It would make for a great pairing with a robust SAK (depending on your needs for a tool loadout). However, I wasn't a fan of the plier shape for some reason, maybe just too blunt for my liking, and the ergonomics weren't great for me. I don't have large hands either, so if someone has larger hands, I would imagine this to be even more of a problem. Everyone's different though, so it may be just fine for you :tu:
-
My twins ar here. Two Leatherman Freestyle, new in blister...
Does anyone have any experiences on these? Like to hear pros and cons...
I had one, but I ended up selling it. I liked the initial idea of it as a decent little OHO blade and a set of pliers. It would make for a great pairing with a robust SAK (depending on your needs for a tool loadout). However, I wasn't a fan of the plier shape for some reason, maybe just too blunt for my liking, and the ergonomics weren't great for me. I don't have large hands either, so if someone has larger hands, I would imagine this to be even more of a problem. Everyone's different though, so it may be just fine for you :tu:
Right now i am thinking, should i open the box, or sell/trade them both straight away... I will sell/trade one of them anyway... But dont know yet what to do wit this other one. Looks like it has some fiddle factor, but i dont think it never going to be one of my favourites...
-
My twins ar here. Two Leatherman Freestyle, new in blister...
Does anyone have any experiences on these? Like to hear pros and cons...
I had one, but I ended up selling it. I liked the initial idea of it as a decent little OHO blade and a set of pliers. It would make for a great pairing with a robust SAK (depending on your needs for a tool loadout). However, I wasn't a fan of the plier shape for some reason, maybe just too blunt for my liking, and the ergonomics weren't great for me. I don't have large hands either, so if someone has larger hands, I would imagine this to be even more of a problem. Everyone's different though, so it may be just fine for you :tu:
Right now i am thinking, should i open the box, or sell/trade them both straight away... I will sell/trade one of them anyway... But dont know yet what to do wit this other one. Looks like it has some fiddle factor, but i dont think it never going to be one of my favourites...
You would be better off to try it if you think there's any chance you will like it. I don't want you to take my negatives and roll with them without hearing any potential positives from others ;) However, I don't ever read much on here about the Freestyle, so I'm not sure it's a widely used/owned tool. Either way, you may as well check it out and find out for yourself how it feels and what your thoughts are :tu:
-
My twins ar here. Two Leatherman Freestyle, new in blister...
Does anyone have any experiences on these? Like to hear pros and cons...
I had one, but I ended up selling it. I liked the initial idea of it as a decent little OHO blade and a set of pliers. It would make for a great pairing with a robust SAK (depending on your needs for a tool loadout). However, I wasn't a fan of the plier shape for some reason, maybe just too blunt for my liking, and the ergonomics weren't great for me. I don't have large hands either, so if someone has larger hands, I would imagine this to be even more of a problem. Everyone's different though, so it may be just fine for you :tu:
Right now i am thinking, should i open the box, or sell/trade them both straight away... I will sell/trade one of them anyway... But dont know yet what to do wit this other one. Looks like it has some fiddle factor, but i dont think it never going to be one of my favourites...
You would be better off to try it if you think there's any chance you will like it. I don't want you to take my negatives and roll with them without hearing any potential positives from others ;) However, I don't ever read much on here about the Freestyle, so I'm not sure it's a widely used/owned tool. Either way, you may as well check it out and find out for yourself how it feels and what your thoughts are :tu:
For now i have waay too much tools. And more on the way as we speak... I have some tools that i really love, and when i look at it, dont think this will reach that point. But still might give it a chance...
I really appreciate your opinions. Thank you for bringing it out.
-
My twins ar here. Two Leatherman Freestyle, new in blister...
Does anyone have any experiences on these? Like to hear pros and cons...
I had one, but I ended up selling it. I liked the initial idea of it as a decent little OHO blade and a set of pliers. It would make for a great pairing with a robust SAK (depending on your needs for a tool loadout). However, I wasn't a fan of the plier shape for some reason, maybe just too blunt for my liking, and the ergonomics weren't great for me. I don't have large hands either, so if someone has larger hands, I would imagine this to be even more of a problem. Everyone's different though, so it may be just fine for you :tu:
Right now i am thinking, should i open the box, or sell/trade them both straight away... I will sell/trade one of them anyway... But dont know yet what to do wit this other one. Looks like it has some fiddle factor, but i dont think it never going to be one of my favourites...
You would be better off to try it if you think there's any chance you will like it. I don't want you to take my negatives and roll with them without hearing any potential positives from others ;) However, I don't ever read much on here about the Freestyle, so I'm not sure it's a widely used/owned tool. Either way, you may as well check it out and find out for yourself how it feels and what your thoughts are :tu:
For now i have waay too much tools. And more on the way as we speak... I have some tools that i really love, and when i look at it, dont think this will reach that point. But still might give it a chance...
I really appreciate your opinions. Thank you for bringing it out.
Right, plus you can always sell/trade it anyway if you don't like it. No problem; I always enjoy talking about the MTs/SAKs I actually have experience with :tu:
-
I got a SS Super Tool i didn't even want one...that badly but you can't argue with free.
-
I got a SS Super Tool i didn't even want one...that badly but you can't argue with free.
No you can't. Hey I have those Wingman and Sidekick for trade if your not digging the Supertool. :whistle:
-
I got a SS Super Tool i didn't even want one...that badly but you can't argue with free.
No you can't. Hey I have those Wingman and Sidekick for trade if your not digging the Supertool. :whistle:
I would but it's tasted my blood and it wants more...anyway pic of the bloodthirsty bugger.
(http://i.imgur.com/9ouyDE3.jpg)
-
Yup, once they get a taste for it your screwed. :D
-
I bought a sacrificial Rebar for parts. Got the replaceable cutter head swapped into my Wave and traded Wave scissors for Rebar awl; the awl will require some grinding to match the nail-nick height and also to allow the Wave to fully close. Definitely rekindled my love for the Wave though!
-
CS4
(http://img.tapatalk.com/d/14/04/04/azybeha6.jpg)
(http://img.tapatalk.com/d/14/04/04/pyvajypu.jpg)
Swiss Army knives .
-
(http://img.tapatalk.com/d/14/04/04/a4yhymun.jpg)
Not my new Leatherman, but a Rebar ready to be gifted to my brother for his bday. :-)
-
(http://s13.postimg.org/dg68i4qnb/P4044226_Kopiowanie.jpg) (http://postimage.org/)
(http://s16.postimg.org/dvnw77g79/P4044196_Kopiowanie.jpg) (http://postimage.org/)
Super Tool 300 EOD Black & GRIND
-
My latest is a refurbished replacement TTi for the one I sent in a while back. I think it was actually only a week and a half. Best part is, they sent me a refurbished one with the new style scales :D
An interesting note: This one with the new style scales weighs a whopping 8.8oz, compared to the old style one I had with a weight of 8.4oz.
-
My latest is a refurbished replacement TTi for the one I sent in a while back. I think it was actually only a week and a half. Best part is, they sent me a refurbished one with the new style scales :D
An interesting note: This one with the new style scales weighs a whopping 8.8oz, compared to the old style one I had with a weight of 8.4oz.
Those newer scales are monsters but they're prettier than the old ones. :tu:
-
My latest is a refurbished replacement TTi for the one I sent in a while back. I think it was actually only a week and a half. Best part is, they sent me a refurbished one with the new style scales :D
An interesting note: This one with the new style scales weighs a whopping 8.8oz, compared to the old style one I had with a weight of 8.4oz.
Gotta love leathermans warranty, I think the wave comes in at 8.5.
Swiss Army knives .
-
It definitely feels solid and heavier, but I do really like the new look :tu: It's surprising just how much of a difference tenths of an ounce make. This also further convinces me that I wouldn't want to carry anything heavier, or not much heavier.
-
Thought you would like to know I sent my radio shack e4 back to leatherman after breaking a backspring.
Il let you know what happens.
the radio shack was abused. I'm not sure if they will cover it or not.
-
Here are some pics of the replacement TTi LM sent me:
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140404_133814_983_zps74dcad9d.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140404_133814_983_zps74dcad9d.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140404_133941_770_zps2a167ba4.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140404_133941_770_zps2a167ba4.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140404_133912_338_zps67bf6b45.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140404_133912_338_zps67bf6b45.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140404_134033_187_zpsfdc0ca3a.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140404_134033_187_zpsfdc0ca3a.jpg.html)
-
CS4
(http://img.tapatalk.com/d/14/04/04/azybeha6.jpg)
(http://img.tapatalk.com/d/14/04/04/pyvajypu.jpg)
Swiss Army knives .
:drool:
-
MINI
(http://img.tapatalk.com/d/14/04/06/6yny2eqy.jpg)
(http://img.tapatalk.com/d/14/04/06/upytuqah.jpg)
(http://img.tapatalk.com/d/14/04/06/e5ysure6.jpg)
(http://img.tapatalk.com/d/14/04/06/ypuqemyd.jpg)
Swiss Army knives .
-
Nice Mini Colt
Sent from my XT901 using Tapatalk
-
Riveted PST, MINI, 95 and 98 original SuperTools. :)
-
I just bought my first leatherman wave...it's not here yet but should be here this week. I am thinking about getting the spec blade for it
-
I just bought my first leatherman wave...it's not here yet but should be here this week. I am thinking about getting the spec blade for it
What did ya have in mind for a special blade? One of the s30v ones from TTC?
-
I received my new MUT a couple of days ago. It's not had much use yet, except a little light usage and for cutting cheese.
Sent from my iPad using Tapatalk HD
-
I received my new MUT a couple of days ago. It's not had much use yet, except a little light usage and for cutting cheese.
Sent from my iPad using Tapatalk HD
It'll get some more in time!
-
Riveted PST, MINI, 95 and 98 original SuperTools. :)
Nice old LMs there David :tu:
I can't seem to resist them either, with some more solid rivetted JPSTs, another very early "4 238 862"-only USA PST, a DLC PST and a sterile/cleanskin Mini emptying my wallet recently ( I can't wait to get my grubby paws on them, but I will have to) :mail:
-
Riveted PST, MINI, 95 and 98 original SuperTools. :)
Nice old LMs there David :tu:
I can't seem to resist them either, with some more solid rivetted JPSTs, another very early "4 238 862"-only USA PST, a DLC PST and a sterile/cleanskin Mini emptying my wallet recently ( I can't wait to get my grubby paws on them, but I will have to) :mail:
Thank you Greg. Looks like you have several nice ones coming also. There is something about the older LM's. I guess I'm just getting older and more nostalgic.
-
PST :)
-
Sweet score!
live from Nate's mobile
-
You know you may have issues when you buy a tool for a Leatherman display. I didn't want to remove a BO Surge from its drawer and put it into the display, so I bought an extra one to go into the display. :facepalm: Ah who am I kidding. :D
-
You know you may have issues when you buy a tool for a Leatherman display. I didn't want to remove a BO Surge from its drawer and put it into the display, so I bought an extra one to go into the display. :facepalm: Ah who am I kidding. :D
:rofl: nice! :rofl:
-
PST :)
This is quite the looker!!!!! Nice score on this and the others.
Some very nice new LMs from you lads.
-
PST :)
Looks to be in pretty good shape for such an old'un :tu:
-
I got a Black OHT today through work. It's lighter than I thought. I wasn't sure about the sprung pliers but after using the tool today I really dig the comfortable grip and the sprung pliers. I really needed a one hand option today once and the OHT slipped in there nicely and took care of the job. I'm not sure about my total verdict yet but it's better than I thought it would be. I'm carrying it in my side pocket of my carpenter jeans for now, it's pretty comfortable there.
-
This sexy tool arrived even better than my roommate said it would. I think this is one sweet looking tool. Yay LM for this one :salute:.
-
This sexy tool arrived even better than my roommate said it would. I think this is one sweet looking tool. Yay LM for this one :salute:.
that is amazing! great score, High-five her again for me
-
This sexy tool arrived even better than my roommate said it would. I think this is one sweet looking tool. Yay LM for this one :salute:.
that is amazing! great score, High-five her again for me
Seriously, she scored big time for me. I got her her first Alox as a thank you just now. Capt posted about Orange Farmers so I ordered (2) :whistle: I treated myself too :rofl:
-
This sexy tool arrived even better than my roommate said it would. I think this is one sweet looking tool. Yay LM for this one :salute:.
that is amazing! great score, High-five her again for me
Seriously, she scored big time for me. I got her her first Alox as a thank you just now. Capt posted about Orange Farmers so I ordered (2) :whistle: I treated myself too :rofl:
very nice, but for real, that high-five is not just forum talk, :pok: do it :pok:
-
She's has scouts tonight ( she's a den leader ) so the moment she walks in I'll high 5'er.
-
My latest LM is a Micra and I have a renewed interest in it. I still love the Style CS but can see myself EDCing the Micra some days. :tu:
-
My latest LM is a Micra and I have a renewed interest in it. I still love the Style CS but can see myself EDCing the Micra some days. :tu:
you really can't help but love the simple micra. Its the one leatherman got right the first time. :tu:
-
Congrats on the sweet Flair Aloha!¡!
Someone please convince me that I don't need a new Surge. I went to all the retailers in town this week that sell LM products and no one had one :think: I guess I really don't need one.
-
PST :)
Looks to be in pretty good shape for such an old'un :tu:
Greg, over all it is in good shape. Some one sure didnt know how to sharpen the knife blade But that is an easy fix.
-
Congrats on the sweet Flair Aloha!¡!
Someone please convince me that I need a new Surge. I went to all the retailers in town this week that sell LM products and no one had one :think: I guess I really don't need one.
Okay, Terry you really need a new Surge. And the sooner the better! :D :D
-
Okay, Terry you really need a new Surge. And the sooner the better! :D :D
I've honestly tried to get one but can't find one locally. This is something I'd rather buy in person than online like I usually do. Thanks SO much for your encouragement David :D
-
Okay, Terry you really need a new Surge. And the sooner the better! :D :D
I've honestly tried to get one but can't find one locally. This is something I'd rather buy in person than online like I usually do. Thanks SO much for your encouragement David :D
Your welcome! :D I understand some times you just need to get one in your hand and see how it feels. Hope you find one to handle. :tu:
-
I got rebar and micra today.
:multi:
-
I got rebar and micra today.
:multi:
:woohoo:
So you now have 3 Rebars?
-
I got rebar and micra today.
:multi:
:woohoo:
So you now have 3 Rebars?
nope I got two.
I was asked to return the back up rebar I had to the person who gave it to me.
he needs it to use it.
I'm just glad that I didn't break or lose my rebar when I was down to one.
-
I got rebar and micra today.
:multi:
:woohoo:
So you now have 3 Rebars?
nope I got two.
I was asked to return the back up rebar I had to the person who gave it to me.
he needs it to use it.
I'm just glad that I didn't break or lose my rebar when I was down to one.
I was also confused on this thank you for clarifying I thought you were turning into sawman.
-
I was also confused on this thank you for clarifying I thought you were turning into sawman.
Now that's not nice.
-
I was also confused on this thank you for clarifying I thought you were turning into sawman.
Now that's not nice.
If I remember correctly he has about 6-8 rebars if not more. Merely a jest no harm was intended.
-
Sawman aka Steve is my buddy and the realist person here.
he collects what he likes and speaks his mind.
most folks go with the flow here and are along for the ride
sawman does what he wants .
I respect him for that.
he is a leader not a follower
-
I just traded my Mrs a new micra for her old well used one.
her old one needs alot of TLC.
its been living in the bottom of her purse for years now it deserves a new home
:multi:
-
Hmmm how does one sharpen a micra?
Sent from a Sega Dreamcast.
-
Hmmm how does one sharpen a micra?
Sent from a Sega Dreamcast.
sharpen the side with the edge and just remove the burr left on the other side.
I hope that makes sense.
-
I just traded my Mrs a new micra for her old well used one.
her old one needs alot of TLC.
its been living in the bottom of her purse for years now it deserves a new home
:multi:
I cringe when I think how dirty the bottom of a women's purse is. :ahhh
-
Hmmm how does one sharpen a micra?
Sent from a Sega Dreamcast.
sharpen the side with the edge and just remove the burr left on the other side.
I hope that makes sense.
Oh I meant the scissors as for chisel grinds I just suck at sharpening those.
-
Hmmm how does one sharpen a micra?
Sent from a Sega Dreamcast.
sharpen the side with the edge and just remove the burr left on the other side.
I hope that makes sense.
Oh I meant the scissors as for chisel grinds I just suck at sharpening those.
ok
I use fine grit sandpaper. 600 grit is what I normally use.
find the angle by rocking the blade on the paper. You should be able to feel when you got the edge flat against it. Use soft pressure . It should only take a few passes over the paper . I finish mine by taking the burr of the edge off by laying the blades flat on the paper and sanding inside surfaces of them.
it works for me but I'm sure that someone knows a better way.
again I hope I sort of make sense.
:multi:
-
Orange Juice S2 in the mail today :mail:
finally I can stop bitching about my C2 having a corkscrew and no scissors. :)
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors. :multi:
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors. :multi:
That's cool. Have you had a chance to test the wire stripper?
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors. :multi:
That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors. :multi:
That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors. :multi:
That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
lol
I heard the same thing.
that was one of the reasons I bought a blunt nose.
thoughts
the es4 stripper goes from 20 to 12 gauge . I wish it went down to 10. It should work fine for me though. Most of the wiring I mess with is automotive and normally fairly thin so I should be ok.
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors. :multi:
That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
Actually, the MUT Shield fits the NN MP600's ;)
According to my rough measurement just now, the MP600 is 5.1 inches long, so it might or might not fit the Skinth Plus, I think it will fit the XL though. At least, that would make sense :P
-
Thanks for that info, I will keep that in mind. :cheers:
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors. :multi:
That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
lol
I heard the same thing.
that was one of the reasons I bought a blunt nose.
thoughts
the es4 stripper goes from 20 to 12 gauge . I wish it went down to 10. It should work fine for me though. Most of the wiring I mess with is automotive and normally fairly thin so I should be ok.
well I did a little testing and the es4 strips wire,great.
I tested it on some telephone wire and the wire I use for water meter remote readers and it worked awesome.
my st300 has a hard time stripping the little stuff. The es4 will be part if my work edc from now on.
I am very happy with leatherman warranty dept.
I am going to write them a thank you email. I'm very impressed.
-
Someone just won a "near unicorn" on eBay: a green LM Juice !!!!!! :drool:
Was it anyone on MTO ? If so, own up so we can congratulate you for getting a rare piece of LM history :tu:
I've wanted one for ages, and my search continues.........
-
Someone just won a "near unicorn" on eBay: a green LM Juice !!!!!! :drool:
Was it anyone on MTO ? If so, own up so we can congratulate you for getting a rare piece of LM history :tu:
I've wanted one for ages, and my search continues.........
I'm almost afraid to ask... but how much did it go for?
-
I will soon be the (hopefully) proud owner of a Raptor! :ahhh
I'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
-
I will soon be the (hopefully) proud owner of a Raptor! :ahhh
I'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
Let us know what you think once you get it. :tu:
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors. :multi:
That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
lol
I heard the same thing.
that was one of the reasons I bought a blunt nose.
thoughts
the es4 stripper goes from 20 to 12 gauge . I wish it went down to 10. It should work fine for me though. Most of the wiring I mess with is automotive and normally fairly thin so I should be ok.
well I did a little testing and the es4 strips wire,great.
I tested it on some telephone wire and the wire I use for water meter remote readers and it worked awesome.
my st300 has a hard time stripping the little stuff. The es4 will be part if my work edc from now on.
I am very happy with leatherman warranty dept.
I am going to write them a thank you email. I'm very impressed.
Glad they did right by you as they did me with my TTi :tu:
-
I will soon be the (hopefully) proud owner of a Raptor! :ahhh
I'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
I'm looking forward to your thoughts on it.
I want one and I really have no reason why.
it just looks cool.
I bet it works as good as it looks.
-
Oh yeah, and my latest Leatherman is actually a set of three: PST, original Supertool and original Wave :D All are like new, with the Supertool and Wave being listed as never carried. Can't believe I happened to find them on eBay. Both on the same day, and both for great prices, especially when I was about to pay around the same price for a Swisstool. I'm so glad I decided to browse around a bit before getting the Swisstool. I still can't believe I got those two originals in such good condition for such a price :ahhh
And not to leave the little PST out of the love :D It was a gift from one of the many generous members here, and I can't thank that member enough :salute: This is the version I've been after. A late 90's version with the "pivot out" drivers and the smaller plier pivot. So enough of my gushing over these beauties...here are some pics :tu:
Group shots:
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_152233_446_zpsd2632c49.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_152233_446_zpsd2632c49.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_152347_558_zpsee43c2fd.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_152347_558_zpsee43c2fd.jpg.html)
PST:
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_152531_535_zps21253a2c.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_152531_535_zps21253a2c.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_152614_411_zps81638323.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_152614_411_zps81638323.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_152722_102_zps0549a3fc.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_152722_102_zps0549a3fc.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_152806_628_zpsed20f2e1.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_152806_628_zpsed20f2e1.jpg.html)
-
Nice tools Kyle.
:drool:
-
Figured I'd do separate posts for each one considering how long the last one was. Here is the Supertool (date code 0897 and 0997).
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_153117_682_zps1c55bd4c.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_153117_682_zps1c55bd4c.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_153250_129_zps6ac2a944.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_153250_129_zps6ac2a944.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_153346_097_zpsb8a04a7d.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_153346_097_zpsb8a04a7d.jpg.html)
Comparison shot with PST blade:
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_152843_568_zps7948f982.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_152843_568_zps7948f982.jpg.html)
I must say, I am surprised just how beastly and solid it is, yet it only weighed in at 8.8oz, which is the same as the new scaled TTi. The thing that saves the TTi though, is that with a pocket clip, it's not nearly as noticeable as the Supertool will be in my back pocket.
However, I am really impressed with it, even though it's more tool than I'd likely need, and it looks huge in my small(ish) hands. I love the solid snap of each tool when it locks into place, however, the unlocking method isn't that great since it requires one to open another tool to a 90o to release the locked tool. It's nothing major really, but potentially risky if a blade is deployed...just have to be careful. Speaking of the blades: both of them are razor sharp. One major plus to the locking mechanism is that it doesn't interfere with the aesthetics like all the other locks on other models do. I really like that it resembles a much beefier PST.
Overall, I really do like the Supertool, and wouldn't mind carrying it, provided I can deal with the feeling of it in my back pocket next to my wallet. However, after the newness wears off, I will likely put it in one of our vehicles as it seems like a good MT for that duty. I'll see how it does with some regular carry first though.
-
And here is the original Wave (date code is 0802), which is one I've wanted for a good while now:
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_153436_381_zpsb0888b6e.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_153436_381_zpsb0888b6e.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_153654_134_zpsb3551538.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_153654_134_zpsb3551538.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_153805_850_zpsdf71abe0.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_153805_850_zpsdf71abe0.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_153722_713_zps757402fa.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_153722_713_zps757402fa.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_153454_543_zps02df959d.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_153454_543_zps02df959d.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140414_153518_204_zpsb53121ae.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140414_153518_204_zpsb53121ae.jpg.html)
Ok, I love this one too :D There are only two real negatives to it: There is some play in the handles when it's closed, and the fact that it won't work with a pocket clip. Neither are major issues, but I've gotten accustomed to carrying the TTi with the pocket clip, so it's too bad. I knew this would be the case (same with the Supertool locks). The Wave's size and weight should help to make this less of an issue.
I get a kick out of the fact that there are four flathead drivers, but I don't mind. The blades are razor sharp just like the Supertool's. Pliers operate smoothly, and the non-locking tools snap into place solidly enough. The diamond file looks more...well...diamondy if that makes any sense, than any other diamond file on any MTs I've owned.
-
Someone just won a "near unicorn" on eBay: a green LM Juice !!!!!! :drool:
Was it anyone on MTO ? If so, own up so we can congratulate you for getting a rare piece of LM history :tu:
I've wanted one for ages, and my search continues.........
I'm almost afraid to ask... but how much did it go for?
shhhh ..... $US 152.65
-
Someone just won a "near unicorn" on eBay: a green LM Juice !!!!!! :drool:
Was it anyone on MTO ? If so, own up so we can congratulate you for getting a rare piece of LM history :tu:
I've wanted one for ages, and my search continues.........
I'm almost afraid to ask... but how much did it go for?
shhhh ..... $US 152.65
A rare bird indeed. And I thought it would go higher once one went for sale.
Do you have a link?
-
I will soon be the (hopefully) proud owner of a Raptor! :ahhh
I'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
Lmao! You broke your "fools and there money rule"!!!
All joking aside, not to bad of a price. Let us know how it works.
live from Nate's mobile
-
A rare bird indeed. And I thought it would go higher once one went for sale.
Do you have a link?
http://www.ebay.com/itm/111321280119
-
I will soon be the (hopefully) proud owner of a Raptor! :ahhh
I'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
Lmao! You broke your "fools and there money rule"!!!
All joking aside, not to bad of a price. Let us know how it works.
live from Nate's mobile
I know, but I just could not help myself :D
:multi:
-
I will soon be the (hopefully) proud owner of a Raptor! :ahhh
I'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
Lmao! You broke your "fools and there money rule"!!!
All joking aside, not to bad of a price. Let us know how it works.
live from Nate's mobile
I know, but I just could not help myself :D
:multi:
I'm willing to bet most of us have done it. :D
-
The sun is shining.The weather is sweet. Make me to buy a new Squirt. 8)
-
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140416_194113_zpshhpqoix_edit_1397691762555_zpssnprkswr.jpg)
-
The sun is shining.The weather is sweet. Make me to buy a new Squirt. 8)
Cool pic!
live from Nate's mobile
-
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140416_194113_zpshhpqoix_edit_1397691762555_zpssnprkswr.jpg)
Good one Dale!
live from Nate's mobile
-
Here's another group shot of my latest LMs: PST, original Supertool and original Wave :D
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140417_241553_195_zps6ffb222b.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140417_241553_195_zps6ffb222b.jpg.html)
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
-
A nice and stiff (in fact very stiff) Charge TTI that I liked at first glance.
(http://img.tapatalk.com/d/14/04/18/rerapypy.jpg)
-
Here's another group shot of my latest LMs: PST, original Supertool and original Wave :D
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140417_241553_195_zps6ffb222b.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140417_241553_195_zps6ffb222b.jpg.html)
Very nice, you can´t go any more classic than that.
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
-
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
:cheers:
Those sure do look nice :tu: The only one I don't have anymore is the Super Tool. I gave it to my son a few years back and he can't find it.
-
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
:cheers:
Those sure do look nice :tu: The only one I don't have anymore is the Super Tool. I gave it to my son a few years back and he can't find it.
Thanks Terry :salute: Bummer about your SuperTool though :(
-
Thanks Terry :salute: Bummer about your SuperTool though :(
Yeah, but it's no longer mine so no big deal.
-
A nice and stiff (in fact very stiff) Charge TTI that I liked at first glance.
(http://img.tapatalk.com/d/14/04/18/rerapypy.jpg)
Sweet looking Charge!
live from Nate's mobile
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
Yo dog, you be strait up pimping those LMs. LOL!
live from Nate's mobile
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
Yo dog, you be strait up pimping those LMs. LOL!
live from Nate's mobile
I be pimpin, and you know it ain't easy :rofl:
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
Yo dog, you be strait up pimping those LMs. LOL!
live from Nate's mobile
I be pimpin, and you know it ain't easy :rofl:
You got 99 problems, but a LM aint one!
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
Yo dog, you be strait up pimping those LMs. LOL!
live from Nate's mobile
I be pimpin, and you know it ain't easy :rofl:
You got 99 problems, but a LM aint one!
Hahahahahahahaha!!!
live from Nate's mobile
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
Yo dog, you be strait up pimping those LMs. LOL!
live from Nate's mobile
I be pimpin, and you know it ain't easy :rofl:
You got 99 problems, but a LM aint one!
Hahahahahahahaha!!!
live from Nate's mobile
:rofl: :rofl: :rofl:
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
Yo dog, you be strait up pimping those LMs. LOL!
live from Nate's mobile
I be pimpin, and you know it ain't easy :rofl:
You got 99 problems, but a LM aint one!
Nice one Derek :rofl:
...with my mind on my LMs and my LMs on my mind...
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
Yo dog, you be strait up pimping those LMs. LOL!
live from Nate's mobile
I be pimpin, and you know it ain't easy :rofl:
You got 99 problems, but a LM aint one!
Nice one Derek :rofl:
...with my mind on my LMs and my LMs on my mind...
:rofl: :rofl: :rofl:
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
Yo dog, you be strait up pimping those LMs. LOL!
live from Nate's mobile
I be pimpin, and you know it ain't easy :rofl:
You got 99 problems, but a LM aint one!
Nice one Derek :rofl:
...with my mind on my LMs and my LMs on my mind...
:rofl: :rofl: :rofl:
We've been spending most our lives, livin in a LMs paradise.....
live from Nate's mobile
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
Yo dog, you be strait up pimping those LMs. LOL!
live from Nate's mobile
I be pimpin, and you know it ain't easy :rofl:
You got 99 problems, but a LM aint one!
Nice one Derek :rofl:
...with my mind on my LMs and my LMs on my mind...
:rofl: :rofl: :rofl:
We've been spending most our lives, livin in a LMs paradise.....
live from Nate's mobile
I'm friends with the LM that's under my bed...
-
:rofl: I'm trying to remember more lines from back in the day, but drawing a blank right now :think:
-
Almost thought I was in the random thread haha. :tu:
-
Almost thought I was in the random thread haha. :tu:
Every thread around here turns into a random thread. :D
-
I got a bit adaptor kit today.
so far I like it. I'm going to pair it up with a rebar this summer.
-
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140418_155706_zpslctnnzg_edit_1397851151498_zps5ga8hmwt.jpg)
-
Almost thought I was in the random thread haha. :tu:
Every thread around here turns into a random thread. :D
Yup, pretty much >:D
-
Nice Surges Dale!
-
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140418_155706_zpslctnnzg_edit_1397851151498_zps5ga8hmwt.jpg)
very good looking pair Dale.
-
Another PST :mail:
-
Another PST :mail:
One can never have too many PST's :multi:
-
Another PST :mail:
One can never have too many PST's :multi:
Indeed! Some people may think I have way to many but it is hard to pass on a Cabelas PST. :)
-
Another PST :mail:
That's a keeper! Nice PST David :tu:
-
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140418_155706_zpslctnnzg_edit_1397851151498_zps5ga8hmwt.jpg)
Do you favor one over the other? I can't decide if I want the stainless or BO :think: I'll more than likely go for the BO though :D
-
Another PST :mail:
It's a nice old PST and I'm jealous (but not jealous enough to have outbid you for it :pok: ;) )
-
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140418_155706_zpslctnnzg_edit_1397851151498_zps5ga8hmwt.jpg)
Do you favor one over the other? I can't decide if I want the stainless or BO :think: I'll more than likely go for the BO though :D
im a big fan of SS. . But the BO being more rust resistant will likely be the one I carry
-
I got my Crunch in and I will carry it along with whatever MT I carry for work. My initial impressions are; this is a super neat tool with a very nice selection of implements. My plier tips are pretty misaligned but I'm not all that bothered. It should serve me well I believe as the tool seems pretty sturdily built. I like the bit driver aspect it may possibly cut out my little driver set I carry when I want a slimmer carry.
-
I got my Crunch in and I will carry it along with whatever MT I carry for work. My initial impressions are; this is a super neat tool with a very nice selection of implements. My plier tips are pretty misaligned but I'm not all that bothered. It should serve me well I believe as the tool seems pretty sturdily built. I like the bit driver aspect it may possibly cut out my little driver set I carry when I want a slimmer carry.
I love the Crunch, it has everything you need on it. My only complaint is it takes so long to open it into pliers then you have to un-screw the bolt to get the right size, etc...
-
I got my Crunch in and I will carry it along with whatever MT I carry for work. My initial impressions are; this is a super neat tool with a very nice selection of implements. My plier tips are pretty misaligned but I'm not all that bothered. It should serve me well I believe as the tool seems pretty sturdily built. I like the bit driver aspect it may possibly cut out my little driver set I carry when I want a slimmer carry.
I love the Crunch, it has everything you need on it. My only complaint is it takes so long to open it into pliers then you have to un-screw the bolt to get the right size, etc...
I was carrying a small vise grip in my tool belt so this will be interesting to see how i get along with these. I was playing with it last night and yes it does take a bit to finally get them into a useable configuration but the neatness factor is huge so it will be fun messing with them, till of course they stop being fun and possibly get annoying. I do wish already that the sheath ( I got leather ) held the tool in the open and ready position.
-
Another PST :mail:
That's a keeper! Nice PST David :tu:
Thank you Pat. It's not quite as old as the one you found a while back but it's the next step in the progression of the the Cabelas PST.
Another PST :mail:
It's a nice old PST and I'm jealous (but not jealous enough to have outbid you for it :pok: ;) )
Greg this is only the second one of these I`ve seen on ebay. The other was several years ago and I got out bid on it. Since this one had the sheath with it I deceided to make a serious run at it. Stack has one in the PST Chronology Project on page 19.
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
Yo dog, you be strait up pimping those LMs. LOL!
live from Nate's mobile
I be pimpin, and you know it ain't easy :rofl:
You got 99 problems, but a LM aint one!
Nice one Derek :rofl:
...with my mind on my LMs and my LMs on my mind...
:rofl: :rofl: :rofl:
We've been spending most our lives, livin in a LMs paradise.....
live from Nate's mobile
I'm friends with the LM that's under my bed...
They see me fixin'... They hatin'...
-
You've gone all OLMG (Original Leatherman Gangsta)!!
They look so purdy!
Yayuh booiiiiyyy :rofl: I do love the classic LM style :tu:
Yo dog, you be strait up pimping those LMs. LOL!
live from Nate's mobile
I be pimpin, and you know it ain't easy :rofl:
You got 99 problems, but a LM aint one!
Nice one Derek :rofl:
...with my mind on my LMs and my LMs on my mind...
:rofl: :rofl: :rofl:
We've been spending most our lives, livin in a LMs paradise.....
live from Nate's mobile
I'm friends with the LM that's under my bed...
They see me fixin'... They hatin'...
:rofl:
-
Got the Raptor today. I'm liking it so far. The only thing I had a problem with is it is very difficult to put it in the sheath while the shears are deployed. The handles are a bit "wobbly" as well. I might try and tighten the screw that is holding on the oxygen wrench to see if it help tighten it up, but it might make the oxygen wrench very tight.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01757_zps393c53d3.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01757_zps393c53d3.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01759_zps53371529.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01759_zps53371529.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01765_zps95c8dee1.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01765_zps95c8dee1.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01766_zpsf97f071e.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01766_zpsf97f071e.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01760_zpsbb78e180.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01760_zpsbb78e180.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01763_zps0167fa2e.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01763_zps0167fa2e.jpg.html)
-
8) Capt
-
Got the Raptor today. I'm liking it so far. The only thing I had a problem with is it is very difficult to put it in the sheath while the shears are deployed. The handles are a bit "wobbly" as well. I might try and tighten the screw that is holding on the oxygen wrench to see if it help tighten it up, but it might make the oxygen wrench very tight.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01757_zps393c53d3.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01757_zps393c53d3.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01759_zps53371529.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01759_zps53371529.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01765_zps95c8dee1.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01765_zps95c8dee1.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01766_zpsf97f071e.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01766_zpsf97f071e.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01760_zpsbb78e180.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01760_zpsbb78e180.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01763_zps0167fa2e.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01763_zps0167fa2e.jpg.html)
GREAT PICS!!!!!
-
Thanks Dale. :tu:
-
Got a new Surge case today. . .
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140421_163340_zpsyowk4hfy.jpg)
-
Got a new Surge case today. . .
(http://i1252.photobucket.com/albums/hh571/ajones1051/20140421_163340_zpsyowk4hfy.jpg)
beautiful case Dale :tu:
-
This just came in today. :mail:
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01777_zpse0ad83b3.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01777_zpse0ad83b3.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01786_zps7e6f0a6f.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01786_zps7e6f0a6f.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01782_zps89c5dd93.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01782_zps89c5dd93.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01784_zpsad769379.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01784_zpsad769379.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01791_zpsaf526400.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01791_zpsaf526400.jpg.html)
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knives%20and%20MT%205/DSC01790_zps0f703902.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knives%20and%20MT%205/DSC01790_zps0f703902.jpg.html)
I love PST's, MT's with advertising, and Cigarette advertising expecially so this is a trifecta of happiness for me. :ahhh :ahhh
-
Nice PST Cap'n :cheers:
-
Nice PST Cap'n :cheers:
Thanks! Big thank you for helping me acquire it. ;)
-
My very latest LM is a Squirt PS4. It's a very well built tool at first impression, no major complaints but I have some difficulty with its file. It's more of a mechanical file and cannot be used for fingernails. It is for this reason that I would probably not carry it. Still, I'm glad to have it for the collection :D
-
My very latest LM is a Squirt PS4. It's a very well built tool at first impression, no major complaints but I have some difficulty with its file. It's more of a mechanical file and cannot be used for fingernails. It is for this reason that I would probably not carry it. Still, I'm glad to have it for the collection :D
Yea the file is pretty course which is strange on such a small tool and file. Definitely not great for finger nails.
-
As brought up in the Style thread. Maybe them retiring the Style will give them room to add a new keychain tool to there current production. If they do they better make some better decisions then the last few new additions.
-
My very latest LM is a Squirt PS4. It's a very well built tool at first impression, no major complaints but I have some difficulty with its file. It's more of a mechanical file and cannot be used for fingernails. It is for this reason that I would probably not carry it. Still, I'm glad to have it for the collection :D
Just carry a Rambler with it. :pok:
-
My very latest LM is a Squirt PS4. It's a very well built tool at first impression, no major complaints but I have some difficulty with its file. It's more of a mechanical file and cannot be used for fingernails. It is for this reason that I would probably not carry it. Still, I'm glad to have it for the collection :D
I find that file odd as well. It really doesn't make sense to have a file like that on such a keychain tool. The nail file/nail cleaner tool that the Squirts used to have would have been so much better. That was the main detractor for me as well, but I did put it on keychain duty as it is still a good little tool for that :tu:
-
Can you see the new additions?
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4592small_zps80aae997.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4592small_zps80aae997.jpg.html)
There they are.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4593small_zps40864992.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4593small_zps40864992.jpg.html)
-
Very nice Chako. Now you need the others. :pok: :D
-
I have 2 more on the way...and 2 very special Leathermans that have decided to go to the West coast of the US for some unknown reason, a worry that I won't get them safe and sound home.
-
Nice additions Dan :tu: Glad to see you got them.
-
I have 2 more on the way...and 2 very special Leathermans that have decided to go to the West coast of the US for some unknown reason, a worry that I won't get them safe and sound home.
They have been secretly re-routed to me and are now in my possession. >:D
-
Figures. :D
-
Got me some supertools coming, can't wait.
Sent from my DROID RAZR using Tapatalk
-
I have 2 more on the way...and 2 very special Leathermans that have decided to go to the West coast of the US for some unknown reason, a worry that I won't get them safe and sound home.
they appear to have taken a scenic route, but the latest update has them North of the border now... they should be in your hands soon. :cheers:
-
:tu: :)
-
The newest member of my family, courtesy of Mercury. PST II tool loadout + locking + rounded edges = big win in my book! :tu:
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2305_zpsffe3c2ca.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2305_zpsffe3c2ca.jpg.html)
Date codes are 0700/1100. It's in great shape too. Thanks Sean! :salute:
-
Very cool Pulse. Going to track one down myself one day. :tu:
-
I just scored a LM Sidekick from the local markets in as new condition for $30. I'm pretty happy with that, the collection is rapidly growing. Got a NIB Vic Super Tinker yesterday, and have a LM Mirca on order and an Alox Electrician arriving hopefully tomorrow! The bug has bitten! :D
-
I just scored a LM Sidekick from the local markets in as new condition for $30. I'm pretty happy with that, the collection is rapidly growing. Got a NIB Vic Super Tinker yesterday, and have a LM Mirca on order and an Alox Electrician arriving hopefully tomorrow! The bug has bitten! :D
You're off to a great start! Now you need a Rebar :D
-
I just scored a LM Sidekick from the local markets in as new condition for $30. I'm pretty happy with that, the collection is rapidly growing. Got a NIB Vic Super Tinker yesterday, and have a LM Mirca on order and an Alox Electrician arriving hopefully tomorrow! The bug has bitten! :D
You're off to a great start! Now you need a Rebar :D
+1 :tu:
-
"The newest member of my family, courtesy of Mercury. PST II tool loadout + locking + rounded edges = big win in my book!"
I often wounder why LM did not just update the locks on the Pulse & ST200 instead of coming out with the Kick, Fuse, Blast, Core.
-
I just scored a LM Sidekick from the local markets in as new condition for $30. I'm pretty happy with that, the collection is rapidly growing. Got a NIB Vic Super Tinker yesterday, and have a LM Mirca on order and an Alox Electrician arriving hopefully tomorrow! The bug has bitten! :D
You're off to a great start! Now you need a Rebar :D
+1 :tu:
I got the daddy of Rebar, ST300... Does that count?
-
The newest member of my family, courtesy of Mercury. PST II tool loadout + locking + rounded edges = big win in my book! :tu:
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2305_zpsffe3c2ca.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2305_zpsffe3c2ca.jpg.html)
Date codes are 0700/1100. It's in great shape too. Thanks Sean! :salute:
That's awesome Tom!! :drool:
-
I just scored a LM Sidekick from the local markets in as new condition for $30. I'm pretty happy with that, the collection is rapidly growing. Got a NIB Vic Super Tinker yesterday, and have a LM Mirca on order and an Alox Electrician arriving hopefully tomorrow! The bug has bitten! :D
You're off to a great start! Now you need a Rebar :D
+1 :tu:
I got the daddy of Rebar, ST300... Does that count?
No! :twak:
-
I just scored a LM Sidekick from the local markets in as new condition for $30. I'm pretty happy with that, the collection is rapidly growing. Got a NIB Vic Super Tinker yesterday, and have a LM Mirca on order and an Alox Electrician arriving hopefully tomorrow! The bug has bitten! :D
You're off to a great start! Now you need a Rebar :D
+1 :tu:
I got the daddy of Rebar, ST300... Does that count?
No! :twak:
:pok: :rofl:
-
I just scored a LM Sidekick from the local markets in as new condition for $30. I'm pretty happy with that, the collection is rapidly growing. Got a NIB Vic Super Tinker yesterday, and have a LM Mirca on order and an Alox Electrician arriving hopefully tomorrow! The bug has bitten! :D
You're off to a great start! Now you need a Rebar :D
+1 :tu:
I got the daddy of Rebar, ST300... Does that count?
No! :twak:
:pok: :rofl:
:D :cheers:
-
Got myself a Rebar. :tu: Damn, this sucker's stiff! Time to start fiddling......
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2383_zps11778543.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2383_zps11778543.jpg.html)
-
The one I got my dad for his B-Day was stiff as hell!! A little oil. and lots of playing made it so he shouldn't break a nail trying to open the tools up.
Sent from my iPad using Tapatalk
-
Got myself a Rebar. :tu: Damn, this sucker's stiff! Time to start fiddling......
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2383_zps11778543.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2383_zps11778543.jpg.html)
It will losen up.
It should be a great tool for you Tom.
:multi:
-
Got myself a Rebar. :tu: Damn, this sucker's stiff! Time to start fiddling......
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2383_zps11778543.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2383_zps11778543.jpg.html)
It will losen up.
It should be a great tool for you Tom.
:multi:
Definitely should loosen up with use.
What are your first impressions?
-
Definitely should loosen up with use.
What are your first impressions?
I like it. It feels solid, and good in the hand. It'll be getting a good workout at the store soon enough.
-
The tools on mine loosened up also with time. At first, it was hard to open some of the tools.
-
The newest member of my family, courtesy of Mercury. PST II tool loadout + locking + rounded edges = big win in my book! :tu:
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2305_zpsffe3c2ca.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2305_zpsffe3c2ca.jpg.html)
Date codes are 0700/1100. It's in great shape too. Thanks Sean! :salute:
Very cool mate. I don't think it's a surprise to most folks to hear that I'm a BIG fan of the Pulse. :D
-
Definitely should loosen up with use.
What are your first impressions?
I like it. It feels solid, and good in the hand. It'll be getting a good workout at the store soon enough.
Sweet! Give it a workout and report back. ;)
-
Got myself a Rebar. :tu: Damn, this sucker's stiff! Time to start fiddling......
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2383_zps11778543.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2383_zps11778543.jpg.html)
Mine was like that as well. But some oil and som fiddling changed it over time and it´s now very smooth.
-
I recently got myself a LM Micra... It's pretty awesome!
-
My BO Rebar has been delivered, but to my colleague in the states. I have to wait until the 21st to get my hands on it. :ahhh
-
My BO Rebar has been delivered, but to my colleague in the states. I have to wait until the 21st to get my hands on it. :ahhh
It's worth the wait! :pok:
-
I've been on a LM binge the last week or so. So far I've gotten.
An immaculate PST with a mirror finish.
2 Squirt ES4's red and black
A blue Squirt P4
A pink Squirt S4 for my bride
A dark blue almost purple Micra with the plastic scales :(
A Core in fair condition
A brand new Rebar
And a Mini Tool that had seen better days. But after a few hours with the dremel and some scotchbrite. I got her looking like she just came out of the factory.
I also ordered a piranha and received an empty envelope with a hole ripped in the corner. I was crushed, that's the one I was looking forward to the most. I've wanted one for years and had finally talked myself into spending the cash. I got my money back but would have much rather had the piranha.
Sent from my iPhone using Tapatalk
-
Rebar:
(https://farm8.staticflickr.com/7381/13957289840_9e971b708d_z.jpg) (https://www.flickr.com/photos/26008756@N08/13957289840/)
Obviously not the BO version; got offered a S/H stainless one as well. :tu:
Collection? What collection?
-
I've been on a LM binge the last week or so. So far I've gotten.
An immaculate PST with a mirror finish.
2 Squirt ES4's red and black
A blue Squirt P4
A pink Squirt S4 for my bride
A dark blue almost purple Micra with the plastic scales :(
A Core in fair condition
A brand new Rebar
And a Mini Tool that had seen better days. But after a few hours with the dremel and some scotchbrite. I got her looking like she just came out of the factory.
I also ordered a piranha and received an empty envelope with a hole ripped in the corner. I was crushed, that's the one I was looking forward to the most. I've wanted one for years and had finally talked myself into spending the cash. I got my money back but would have much rather had the piranha.
Nice Haul (but a pity about the Piranha :cry: )
Tell us more about the "immaculate PST with a mirror finish." It sounds interesting ....
-
Just got a PST. First one ever. Handled one in a shop about 18 years ago, never thought I would own one.
-
I've been on a LM binge the last week or so. So far I've gotten.
An immaculate PST with a mirror finish.
2 Squirt ES4's red and black
A blue Squirt P4
A pink Squirt S4 for my bride
A dark blue almost purple Micra with the plastic scales :(
A Core in fair condition
A brand new Rebar
And a Mini Tool that had seen better days. But after a few hours with the dremel and some scotchbrite. I got her looking like she just came out of the factory.
I also ordered a piranha and received an empty envelope with a hole ripped in the corner. I was crushed, that's the one I was looking forward to the most. I've wanted one for years and had finally talked myself into spending the cash. I got my money back but would have much rather had the piranha.
Nice Haul (but a pity about the Piranha :cry: )
Tell us more about the "immaculate PST with a mirror finish." It sounds interesting ....
I asked the wife to take some photos of it today. I worked a 12 hour graveyard shift last night so I am not interested in anything but my bed right now. But hopefully when I wake up this evening I will have some killer pics to share.
Sent from my iPhone using Tapatalk
-
Just got a PST. First one ever. Handled one in a shop about 18 years ago, never thought I would own one.
Congratz on your first! I hope you're enjoying yours as much as I do mine.
:cheers:
-
Rebar:
(https://farm8.staticflickr.com/7381/13957289840_9e971b708d_z.jpg) (https://www.flickr.com/photos/26008756@N08/13957289840/)
Obviously not the BO version; got offered a S/H stainless one as well. :tu:
Collection? What collection?
You now own one of the best LM's money can buy! :)
-
Got the two broken PSTs from lowtech. Made one good one!
-
I posted not long ago that my old Surge's blade exchanger "door" was loose. I figured out it was due to the shrink tube I used to mod Tshanks to fit. The shrink tube spread the door open but in the mean time I got anxious and got a New BO Surge.
I've been busy so I've made time to take a snap of my new beauty. What a great tool and the new blade exchanger is AWESOME so far. I couldnt help myself because the Surge is one bad arse tool and I couldn't be away from it for long. I'll fix my old Surge soon enough but for now this ebony goddess is occupying all my work time.
The great thing is I can use my Tshanks without issue and modification.
-
Just got a PST. First one ever. Handled one in a shop about 18 years ago, never thought I would own one.
:sa: good grief man! What took you so long?
-
I just picked up the new wave and was a little disappointed with the bottle opener, anyone else think its hard to use?
-
I just picked up the new wave and was a little disappointed with the bottle opener, anyone else think its hard to use?
Yeah, never liked the so called combo bottle/can opener. It's a can opener, it's designed to open cans, not bottles. Why they call it a bottle opener I don't know.
Well you can always do it like this. >:D
(http://i1255.photobucket.com/albums/hh627/enki_ck/Smiley/beer_girl.jpg)
Most of us have multiple bottle openers on us anyways, some keyring style tool, prybar, small Swiss army knife (SAK).
-
I just picked up the new wave and was a little disappointed with the bottle opener, anyone else think its hard to use?
Yeah, never liked the so called combo bottle/can opener. It's a can opener, it's designed to open cans, not bottles. Why they call it a bottle opener I don't know.
Well you can always do it like this. >:D
(http://i1255.photobucket.com/albums/hh627/enki_ck/Smiley/beer_girl.jpg)
Most of us have multiple bottle openers on us anyways, some keyring style tool, prybar, small Swiss army knife (SAK).
The gerber artifact is a sweet little tool that fits the bill perfectly, the replaceable blades are prefect. Plus the pry bar is great for getting dirt from underneath your finger nails :)
-
I got a pst 2 in the mail today.
its been used pretty hard and shows it .
it's going to take awhile to get her back in shape but I think I can handle it.
-
I got a pst 2 in the mail today.
its been used pretty hard and shows it .
it's going to take awhile to get her back in shape but I think I can handle it.
There's something very satisfying about restoring a MT back to full working order :tu:
-
I got a pst 2 in the mail today.
its been used pretty hard and shows it .
it's going to take awhile to get her back in shape but I think I can handle it.
There's something very satisfying about restoring a MT back to full working order :tu:
I really do enjoy working on old tools.
there is nothing better to me than making a old beat up tool look like new.
actually no there is something better. Using a tool i restored.
-
Got a Skeletool from a member here. It does look good in all stainless steel. :)
-
Some classic Portland steel here today
(http://i782.photobucket.com/albums/yy104/kirk130013/imagejpg1_zps9ede1f1d.jpg) (http://s782.photobucket.com/user/kirk130013/media/imagejpg1_zps9ede1f1d.jpg.html)
Micra(09/96-07/96) and PST(12/94-01/95) from our own Zed,and a Wave tool adopter(at last) off eBay.
-
I got a pst 2 in the mail today.
its been used pretty hard and shows it .
it's going to take awhile to get her back in shape but I think I can handle it.
There's something very satisfying about restoring a MT back to full working order :tu:
I really do enjoy working on old tools.
there is nothing better to me than making a old beat up tool look like new.
actually no there is something better. Using a tool i restored.
well said, JA. I completely agree. :cheers:
-
The Japanese PST arrived today, looks like it's been well used/loved; blade sharpened thin, Phillips screwdriver rounded, small screwdriver chipped. Other than that it's Great! Gave it a few squirts of oil, pliers now bleeding rust.
-
The Japanese PST arrived today, looks like it's been well used/loved; blade sharpened thin, Phillips screwdriver rounded, small screwdriver chipped. Other than that it's Great! Gave it a few squirts of oil, pliers now bleeding rust.
So how many Japanese PSTs does that make for you? Very nice :tu:
I almost walked out of Cabela's with a Raptor y'day but just couldn't pull it off. I went in looking for a BO Surge and they only had one stainless one left and again I held back and I'm waiting.
-
I have a pretty sweet looking Sideclip on the way.
-
My newest leatherman is a nice pst 2 I made out of a beat pst 2 and a used pst.
the restored pst is also decent. Its going to be a good user for a friend of mine. :)
-
The Japanese PST arrived today, looks like it's been well used/loved; blade sharpened thin, Phillips screwdriver rounded, small screwdriver chipped. Other than that it's Great! Gave it a few squirts of oil, pliers now bleeding rust.
So how many Japanese PSTs does that make for you? Very nice :tu:
I almost walked out of Cabela's with a Raptor y'day but just couldn't pull it off. I went in looking for a BO Surge and they only had one stainless one left and again I held back and I'm waiting.
NO 2 for me, the first one I got was in like new condition, the latest one looks like it was used pretty hard, which is also good. :tu:
-
BO Rebar and bit driver kit:
(https://farm3.staticflickr.com/2897/14241071291_1e5a3ea268_z.jpg) (https://flic.kr/p/nGrdkV)
-
I have to get myself one of those bit drivers one day.
Nice set. :cheers:
-
Sometimes you just gotta love the flea market..... :D
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2529_zps92431641.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2529_zps92431641.jpg.html)
Date codes are 0899/0899. Now that I've got two, the PSTII is gonna be a regular in the rotation. Sucker's in beautiful shape, not bad for $15.......
-
Sometimes you just gotta love the flea market..... :D
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2529_zps92431641.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2529_zps92431641.jpg.html)
Date codes are 0899/0899. Now that I've got two, the PSTII is gonna be a regular in the rotation. Sucker's in beautiful shape, not bad for $15.......
Good one Tom, it looks brand new :tu:
-
Sometimes you just gotta love the flea market..... :D
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2529_zps92431641.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2529_zps92431641.jpg.html)
Date codes are 0899/0899. Now that I've got two, the PSTII is gonna be a regular in the rotation. Sucker's in beautiful shape, not bad for $15.......
Looking good especially for $15. :drool:
-
Sweet score Tom :tu:
-
Thanks guys. It's brand new for all intents and purposes. I don't see a single blemish that would indicate it was ever even used. The blade hasn't been sharpened, no scratches on the drivers or handles, nothing. :tu: That'll be changing for sure. >:D I really like the II, but was always a bit hesitant using the one I got from Sazabi. Now that I've got a backup though, I can use without fear. It already tightened up the handle on my frying pan earlier so I could make a burger for dinner..... :)
-
I finally broke down and got a Leatherman Skeletool CX
I wasn't sure if it was going to be a gimmicky tool or something that could stand up to regular use.
so far my first impressions is Leatherman has another winner on it's hands.
https://www.youtube.com/watch?v=4vRqjmv2TQs
GearsNTools
EDC - Charge TTI
-
Got a Sideclip the other day. The blade was dull, and well not any more.
(http://i1156.photobucket.com/albums/p561/trouthunter7/2014-05-26085944_zps78d751e5.jpg)
-
Got a Sideclip the other day. The blade was dull, and well not any more.
(http://i1156.photobucket.com/albums/p561/trouthunter7/2014-05-26085944_zps78d751e5.jpg)
Awesome. I might carry my Sideclip today as well.
-
Bought a second Style PS to use as a beater/partner to SmallTinkers
-
Just got the missus her first LM so we can throw out that piece of crap SAK knockoff she's been using (she's not allowed near my SAKs or Leathermans after she stole my vic classic).
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/32F56194-3588-4AB4-8438-B960129E6130_zpsdywxudsa.jpg)
I'm reeeeaaallly not a fan of the juices. They're too light to use for even every day tasks (just an opinion)... but for a girl like her it'd suit her just fine. She said it was "cute" because it was pink... lol.
-
My Leatherman 1 Pocket Tool arrived today. It is on my keychain and ready for action.
-
My Leatherman 1 Pocket Tool arrived today. It is on my keychain and ready for action.
I just got a 5 and it went straight from the package to my keychain. I'm unsure how long it will stay. It might be a little wide. Il know after I carry it a little if it bugs me or not.
(http://i1211.photobucket.com/albums/cc421/JAfromMn/temporary_zpsd993706a.jpg)
-
Looks good. :tu:
-
Looks good. :tu:
thanks captain i like it.
its a part of my growing piranha family now. :)
-
I've never had a leatherman before, so I decided to fix that. These all showed up yesterday.
(http://f.cl.ly/items/3m0N3u0K2H2j1Q0h2X0e/IMG_20140601_245424338.jpg)
-
Very nice Bonjoey. I've just ordered myself one of the new S2's. I thought about the CS4 but decided I wanted it to be extra thin.
I didn't realize those little micras had a plastic case. They look great.
Welcome to the forum by the way.
-
I've never had a leatherman before, so I decided to fix that. These all showed up yesterday.
Nice selection of smaller LMs, including my favourite, the P4 :tu:
-
Very nice Bonjoey. I've just ordered myself one of the new S2's. I thought about the CS4 but decided I wanted it to be extra thin.
I didn't realize those little micras had a plastic case. They look great.
Welcome to the forum by the way.
The older ones did but they did away with them. Here have a link (http://forum.multitool.org/index.php/topic,51919.0.html) to chako's thread on pocket sized leathermans.
-
My new Surge.
(http://sdmason.smugmug.com/EDC/i-dTbFLXd/0/M/DSC_3765-M.jpg)
-
I've never had a leatherman before, so I decided to fix that. These all showed up yesterday.
That´s a real kickstart then. :)
Nice collection.
-
(http://img.tapatalk.com/d/14/06/03/e9emebev.jpg)(http://img.tapatalk.com/d/14/06/03/u8ahy4as.jpg)
I just got my my "new" used 1995 pst in the mail today. I can't be more happy, as there is not a scratch on it. Heck even the knife is razor sharp, looks like Christmas came early boys. :-) the problem is its in too nice of condition, I'm not sure if I can use it. I bought it as an edc, as I did not want to use my pre 1992.
Sent from my C6916 using Tapatalk
-
@BonJoey, I like the way you think, from none to instant collection.
@SdMason, great looking set up. I am a huge fan of the Surge.
@leathermon, nice looking PST. I can totally relate to not wanting to use some, ok who am I kidding, many of my tools :whistle:. I do however use a JPST for my off day carry.
I received my BTN tools today and I'm very happy with them. I cannot wait to see what feed back LM gets and how these tools eventually evolve. I really like the #2 for some reason. My picture can out very blurry so I'll snap another tomm.
-
Is that a pocketable BO adjustable wrench? :ahhh
-
Freestyle,thanks to jerryf!
(http://i782.photobucket.com/albums/yy104/kirk130013/imagejpg15_zps6e9fbfe1.jpg) (http://s782.photobucket.com/user/kirk130013/media/imagejpg15_zps6e9fbfe1.jpg.html)
-
Rebar in SS which is currently taking a WD40 soak as it feels a bit stiff. Most likely this has been asked before but where does LM stamp the date code on the Rebar? ???
-
Bought a mint condition Leatherman E302 knife/screwdriver multitool. The E302 is shown with a Knipex 87 01 125 Cobra pliers and an Occidental Leather B5068 calculator case I carry on my belt to hold EDC items.
(http://parnass.com/knives/knife-pliers-case2.jpg)
-
I have not bought a new Leatherman since March... up until today that is :D. I picked up a like new BO Fuse with a MOLLE sheath for $15. Couldn't pass that deal up :cheers:
-
I have not bought a new Leatherman since March... up until to day that is :D. I picked up a like new BO Fuse with a MOLLE sheath for $15. Couldn't pass that deal up :cheers:
That's a killer deal. :tu:
-
Well, my latest was a gray Squirt S4 for less than a day. As I was approaching the entrance at the opposite end of my building here at work, I happened to be looking down and and the little S4 caught my attention. The timing of me looking down and seeing that is just cool, as it didn't stand out with its gray color on an old paved parking lot on a gray, rainy day. My initial thought was "score!" as I've kind of wanted one, but never really pursued it. Then I thought that I should do the right thing as, based on where I found it, it likely belonged to a coworker.
However, it was just about time to leave, so I cleaned it up as it had some dirt in it, and left work. I enjoyed fiddling with it a bit last night, and I really liked it, so I'm looking to get one. Anyway, I just got into work a little bit ago, and figured I should do the right thing and sent an email to everyone in my building asking if anyone was missing a Leatherman. A few minutes later, a woman came down to my office and was very thankful I found it. She hadn't even realized she lost it until sometime last night.
So now I'm looking to get a red one. I've found a few on eBay, and they're cheap, but of course they're marked up with chips in the paint and whatnot. To be expected for a keychain tool, and not a big deal I suppose as long as the tools themselves are in good condition.
-
This one ought to be a keeper until such time....
-
@Monrogue :tu: good to know there are good folks out there. My faith is strengthened when people do the right thing. It's cool it was a LM carrying woman! Good for you buddy for getting that little guy back home. You can find a lot of them all over flea bay especially along with other Squirts and Micras. I picked up 2 P4's and a Micra all in very nice shape for $9 each.
-
It always pays to do the right thing. I hope you find the one you're after :tu:
-
@Monrogue :tu: good to know there are good folks out there. My faith is strengthened when people do the right thing. It's cool it was a LM carrying woman! Good for you buddy for getting that little guy back home. You can find a lot of them all over flea bay especially along with other Squirts and Micras. I picked up 2 P4's and a Micra all in very nice shape for $9 each.
Thanks buddy, it does feel good to reunite someone with a lost item. I thought of it from my perspective of how I would feel if I discovered I lost one of mine and hoped someone found it and would return it. And yeah, it was funny that it was a woman (nothing against the women as I know some carry and some are members here ;)), but I just didn't expect it to be her. I figured it was a certain guy as I found it near his vehicle, so I was surprised when she came down.
So now my latest will indeed be a red Squirt S4 that I just grabbed on eBay. Supposed to be in good, fairly unmarked condition, so we'll see.
-
It always pays to do the right thing. I hope you find the one you're after :tu:
Thanks man, and I did indeed find one :tu:
-
My latest is this Side Kick.
-
My latest is this Side Kick.
Nice pics toolguy! I really dig that background :cheers:
-
I actually have another latest LM. Well, it will be more of a swap, and who knows if it'll be permanent knowing how my mind works with these things ::) I have a Charge AL that I purchased through my job to have on hand here. I've always kept it at my desk, and lately have been eyeballing it and fiddling with it.
It has a couple features that I prefer over my TTi with regular pliers (no cap crimper) and the regular serrated blade (no cutting hook). I originally wanted the hook, but not the cap crimper, but you can't get that without modding. However, I really like the TTi's new scales and looks overall over the AL. Still, the AL is cool looking with the black scales offset by the SS tools and nameplate. Looks better with the black pocket clip too. The TTi is so slightly thicker and heavier as well (0.2oz heavier). I do feel that the TTi is more durable or something, but that's due to the scales. The AL's scales just don't have that same feel to them, but I don't do anything serious to worry about much real damage to them.
So I think I'm going to give it a go with the AL and see how it goes. I think that overall, it's the better Charge for my tastes, but only by a little. With that in mind, I won't be surprised if I swap them every so often and never completely decide on one or the other ;)
-
I just got 2 of these in today and they really are brand new, factory sealed in plastic.
I think the only reason these aren't gone already is they failed to list the title with "PST". Anyhow, I'm glad to have a couple for the collection :D
http://www.ebay.com/itm/321256589877?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
(http://i.ebayimg.com/00/s/NDgwWDcyMA==/z/rVAAAOxyD9JSAVCM/$(KGrHqZ,!ooFHj)vM9EFBS!VCM(2uw~~60_12.JPG)
-
My latest is this Side Kick.
Nice pics toolguy! I really dig that background :cheers:
Thanks.
I'm starting to understand what it takes to get a good photo.
-
I just got 2 of these in today and they really are brand new, factory sealed in plastic.
I think the only reason these aren't gone already is they failed to list the title with "PST". Anyhow, I'm glad to have a couple for the collection :D
http://www.ebay.com/itm/321256589877?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
(http://i.ebayimg.com/00/s/NDgwWDcyMA==/z/rVAAAOxyD9JSAVCM/$(KGrHqZ,!ooFHj)vM9EFBS!VCM(2uw~~60_12.JPG)
Very nice. :tu:
-
@Monrogue :tu: good to know there are good folks out there. My faith is strengthened when people do the right thing. It's cool it was a LM carrying woman! Good for you buddy for getting that little guy back home. You can find a lot of them all over flea bay especially along with other Squirts and Micras. I picked up 2 P4's and a Micra all in very nice shape for $9 each.
Thanks buddy, it does feel good to reunite someone with a lost item. I thought of it from my perspective of how I would feel if I discovered I lost one of mine and hoped someone found it and would return it. And yeah, it was funny that it was a woman (nothing against the women as I know some carry and some are members here ;)), but I just didn't expect it to be her. I figured it was a certain guy as I found it near his vehicle, so I was surprised when she came down.
So now my latest will indeed be a red Squirt S4 that I just grabbed on eBay. Supposed to be in good, fairly unmarked condition, so we'll see.
TWO thumbs UP.... Just yesterday I reunited someone with his mobile that left in my car....he is a stranger who just meet to collect stuff from me...
-
I just got 2 of these in today and they really are brand new, factory sealed in plastic.
I think the only reason these aren't gone already is they failed to list the title with "PST". Anyhow, I'm glad to have a couple for the collection :D
http://www.ebay.com/itm/321256589877?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
(http://i.ebayimg.com/00/s/NDgwWDcyMA==/z/rVAAAOxyD9JSAVCM/$(KGrHqZ,!ooFHj)vM9EFBS!VCM(2uw~~60_12.JPG)
BUMP.
Only 4 of these left. I don't want anyone to miss out on a NIB PST! :pok: :pok: :D :mail:
-
Is that a pocketable BO adjustable wrench? :ahhh
Yes it is a Crescent 4".
-
a rebar, i bought it on a good bargain. i like it as i used, replaced my st200 on daily repairs.
-
I'm a lost cause. I sold my NIB backup Blast because I wanted to get a new Juice S2 (which should arrive early next week) for $90USD (they're much more expensive than that over here)... immediately regretted it and ordered another NIB one from Ebay for 1/2 the price.
I kept thinking "what if I decide to carry my Blast then I lose it?! Then I don't have another one!!!"... jeez...
-
I'm a lost cause. I sold my NIB backup Blast because I wanted to get a new Juice S2 (which should arrive early next week) for $90USD (they're much more expensive than that over here)... immediately regretted it and ordered another NIB one from Ebay for 1/2 the price.
I kept thinking "what if I decide to carry my Blast then I lose it?! Then I don't have another one!!!"... jeez...
I know the feeling all to well. Its a sickness. :D
-
Finally stopped resisting and bought a Skele...
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/IMG_0269_zps86e22e52.jpg)
-
Finally posting my Charge SLV and Wave 25th Anniversary with some friends.
-
Finally posting my Charge SLV and Wave 25th Anniversary with some friends.
Very nice pictures and collection. :D
-
Nice ones Aloha :tu: That Wave looks polished up nicely. Did you do that?
-
Finally posting my Charge SLV and Wave 25th Anniversary with some friends.
Very nice pictures and collection. :D
Thank you. After seeing Chako's Charge/Wave series I have a ways to go but the hunting is always fun.
Nice ones Aloha :tu: That Wave looks polished up nicely. Did you do that?
Yes the Wave is very polished ( by me ) but not as polished as the factory polished 25th Anniversary.
-
Nice ones Aloha :tu: That Wave looks polished up nicely. Did you do that?
Yes the Wave is very polished ( by me ) but not as polished as the factory polished 25th Anniversary.
Actually, I was asking about the Anniversary one. I figured you polished it as I knew you polished the other one. So that was factory polished then. Nice looking Waves and Charges though :tu:
-
Nice ones Aloha :tu: That Wave looks polished up nicely. Did you do that?
Yes the Wave is very polished ( by me ) but not as polished as the factory polished 25th Anniversary.
Actually, I was asking about the Anniversary one. I figured you polished it as I knew you polished the other one. So that was factory polished then. Nice looking Waves and Charges though :tu:
Yes a factory polish job on the 25th Anniversary Wave. Thanks.
-
Finally stopped resisting and bought a Skele...
...
Well take it out and tell us what you think of it. :pok:
>:D
Finally posting my Charge SLV and Wave 25th Anniversary with some friends.
Great looking collection. :cheers: I'm down to a BO ALX, but I'm feeling drawn to the BO Wave more and more. Bought a SS Wave from the :sailor: a few months back for a friend and it was really hard letting it go once I had it in my hands. :)
-
I have a fondness for the Wave as it was my first higher end LM. The Wave really is a great tool in such a reasonable size and weight.
-
I just got 2 of these in today and they really are brand new, factory sealed in plastic.
I think the only reason these aren't gone already is they failed to list the title with "PST". Anyhow, I'm glad to have a couple for the collection :D
http://www.ebay.com/itm/321256589877?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 (http://www.ebay.com/itm/321256589877?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649)
(http://i.ebayimg.com/00/s/NDgwWDcyMA==/z/rVAAAOxyD9JSAVCM/$(KGrHqZ,!ooFHj)vM9EFBS!VCM(2uw~~60_12.JPG)
Got one of these too...really nice deal; )
ΜΟΛΩΝ ΛΑΒΕ......
-
I got a new surge yesterday but I was out of town so I'm just opening it now.
I'm borrowing it for a review I plan on doing latter this summer from a member.
I might have a hard time returning it.
I like it Alot more than I thought I would.
what a awesome tool.
my hands are black from its new black oxide finish its ranking way hi on my fiddle factor chart.
its reminding me of my oht and how much I liked its oh tools.
I'm unsure of how its gonna work once it gets dirty. I normally prefer inside opening tools but I got to try a wave style tool at work. It may not be a big issue. Time will tell.
-
I just got 2 of these in today and they really are brand new, factory sealed in plastic.
I think the only reason these aren't gone already is they failed to list the title with "PST". Anyhow, I'm glad to have a couple for the collection :D
http://www.ebay.com/itm/321256589877?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
(http://i.ebayimg.com/00/s/NDgwWDcyMA==/z/rVAAAOxyD9JSAVCM/$(KGrHqZ,!ooFHj)vM9EFBS!VCM(2uw~~60_12.JPG)
awesome find Steve.
-
This is a big Leatherman week for me. I'm betting that Timmy will call me and say thanks. I ordered a new stainless Surge, a BO Blast from the Leatherman website, and a used BO Blast. You never know when there will be a Blast shortage, right?
-
This is a big Leatherman week for me. I'm betting that Timmy will call me and say thanks. I ordered a new stainless Surge, a BO Blast from the Leatherman website, and a used BO Blast. You never know when there will be a Blast shortage, right?
Correct. I like the way you think. The time to buy is when you see it. :D
-
This is a big Leatherman week for me. I'm betting that Timmy will call me and say thanks. I ordered a new stainless Surge, a BO Blast from the Leatherman website, and a used BO Blast. You never know when there will be a Blast shortage, right?
This is an extremely happy time for fans of the Blast. Now maybe they'll turn up some Fuses next ;)
-
This is a big Leatherman week for me. I'm betting that Timmy will call me and say thanks. I ordered a new stainless Surge, a BO Blast from the Leatherman website, and a used BO Blast. You never know when there will be a Blast shortage, right?
This is an extremely happy time for fans of the Blast. Now maybe they'll turn up some Fuses next ;)
One can only hope they do and I have some money when they do. Fingers crossed. :ahhh
-
New style Surge, it's quite awesome. Tugs a little on the belt :o , but it's sooo worth it.
-
I got the bit extension for the surge im going to review this summer today.
-
First ever Leatherman, the Skeletool, about a month back. My first one hand opener. A "gateway drug".
(http://www.jemurai.com/preso/apisecurity/img/i-want-you-bill-murray.jpeg)
Ordered a Charge TTi a week later. This can do anything... but is it just a fraction too big for pocket use?
Managed to hold out about a month, then got a Wingman... it was so cheap....for parts for a future mod... to feel the weight and size... to ...to.... I wanted it. :-[
Ok, give it to me straight Letherman veterans. How do you stop? And should I even try?
-
Aussieman: All I can tell you is good luck stopping :ahhh It's like a sickness, and you won't get better hangin' with us.....but please do hang around ;)
-
Aussieman
it is no harder to stop buying them than it is to stop a run away train.
-
I've been carrying my new Rebar for the last 24 hours, so far I'm pretty impressed.
-
I've been carrying my new Rebar for the last 24 hours, so far I'm pretty impressed.
Love the Rebar. very nice MT in my opinion.
-
The Squirt S4 came in today. It was a bit dirtier than I expected, but I was able to take a few mins here at work and give it a good little bath. It is much better now. It has a few good scratches/dings in the scales, but I was expecting that based on the description. The tools themselves are in great condition though :tu: I will post pics later.
-
My BO Surge is on a long term loan, which is a good excuse to add a satin Surge to the arsenal. At 12.3 ounces, she is a Heavy Honey (I like my girls curvy), and maybe not the best choice for EDC when the ST300 and Rebar are substantially lighter. But her plus-size physique provides maximum leverage and grip for difficult nuts and bolts, and her larger blades and scissors are a welcomed addition. Her stubby phillips driver is greatly improved with the addition of the MUT's driver, and/or the driver extension. This is a working man's MT, but equally suited for vehicle carry, heavy duty applications or general fondling. She is Kate Upton with work boots.
(http://i1302.photobucket.com/albums/ag137/toddh6/20140613_143218_zps295b87f4.jpg)
(http://i1302.photobucket.com/albums/ag137/toddh6/20140613_143359_zpscf25efc9.jpg)
-
Here's my new (to me) Squirt S4
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140613_133346_417_zpseb6ac273.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140613_133346_417_zpseb6ac273.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140613_133411_411_zpsf3a281ae.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140613_133411_411_zpsf3a281ae.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140613_133549_131_zpsd8f1ed98.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140613_133549_131_zpsd8f1ed98.jpg.html)
-
Also, here is the Charge AL I swapped with my TTi recently (I never posted pics):
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140613_142218_063_zps302eeaf3.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140613_142218_063_zps302eeaf3.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140613_142427_091_zps33e649c1.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140613_142427_091_zps33e649c1.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140613_142359_911_zps93664e81.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140613_142359_911_zps93664e81.jpg.html)
-
this beauty that arrived today!!
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/ST200/DSC00215.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/ST200/DSC00215.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/ST200/DSC00216.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/ST200/DSC00216.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/ST200/DSC00217.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/ST200/DSC00217.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/ST200/DSC00218.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/ST200/DSC00218.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/ST200/DSC00219.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/ST200/DSC00219.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/ST200/DSC00220.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/ST200/DSC00220.jpg.html)
I love my new Supertool 200.
-
Nice one Detron :tu: How do you like the rocker locks?
-
Nice one Detron :tu: How do you like the rocker locks?
not sure yet, but upon first impressions it is cool.
-
Nice one Detron :tu: How do you like the rocker locks?
not sure yet, but upon first impressions it is cool.
Well between that and your incoming Pulse, you'll have plenty of experience soon enough ;) They do look like they'd have some good fiddle factor.
-
Nice one Detron :tu: How do you like the rocker locks?
not sure yet, but upon first impressions it is cool.
Well between that and your incoming Pulse, you'll have plenty of experience soon enough ;) They do look like they'd have some good fiddle factor.
I also have another Blast on the way! and I have yet to take pics of the Original ST that arrived today as well :facepalm:
-
Nice one Detron :tu: How do you like the rocker locks?
not sure yet, but upon first impressions it is cool.
Well between that and your incoming Pulse, you'll have plenty of experience soon enough ;) They do look like they'd have some good fiddle factor.
I also have another Blast on the way! and I have yet to take pics of the Original ST that arrived today as well :facepalm:
Dang, you got a few new toys to play with now. Enjoy buddy :tu:
-
That black ST 200 is stunning ! :drool:
-
I've been carrying my new Rebar for the last 24 hours, so far I'm pretty impressed.
Love the Rebar. very nice MT in my opinion.
It is nice, I really like it and can't put it down! I'm hoping to get a BO version soon.
-
Just bought a Rebar
-
Just bought a Rebar
Good choice. Is it your first Rebar?
-
Good choice. Is it your first Rebar?
yup... I actually bought two... Debating on whether to give the other or make as backup :)
-
Good choice. Is it your first Rebar?
yup... I actually bought two... Debating on whether to give the other or make as backup :)
Play with one and then decide. :tu:
-
Play with one and then decide. :tu:
i think I'm going to give it to my fiancé to give to his dad... And then buy a backup later... :facepalm:
-
Play with one and then decide. :tu:
i think I'm going to give it to my fiancé to give to his dad... And then buy a backup later... :facepalm:
That works as well. :D
-
Play with one and then decide. :tu:
i think I'm going to give it to my fiancé to give to his dad... And then buy a backup later... :facepalm:
I've given out several as they make terrific gifts :)
-
This rebar is my newest addition.(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20140615_174344.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20140615_174344.jpg.html)
-
Can't get my eyes out of this one...
-
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20and%20MT%20One/DSC02041_zpsec622105.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20and%20MT%20One/DSC02041_zpsec622105.jpg.html)
-
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20and%20MT%20One/DSC02041_zpsec622105.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20and%20MT%20One/DSC02041_zpsec622105.jpg.html)
You what?
-
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20and%20MT%20One/DSC02041_zpsec622105.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20and%20MT%20One/DSC02041_zpsec622105.jpg.html)
You what?
Huh? :think:
-
I was wondering, Cap'n, how are you liking that so far?
-
I was wondering, Cap'n, how are you liking that so far?
Well I have not had a chance to use it yet so I can't comment on the functionality. It carries very well and disappears in the pocket. The bit fits in the holder well and won't slip out either in the stored position or in the "in use" position. Time will tell if the "in use" position will stay as solid once the bit gets worn down a bit. It is pretty small so I wouldn't really choose to use it for bit driving if I had the choice, but it is a good small backup to have. I will give you some more input if it gets some use.
-
New Charge TTi came in today, loving it... It's my first Leatherman. The only other MT I had before was a Gerber MP600 (which definitely was nice) but I can tell just by holding it that the Charge is in a class of its own!
-
New Charge TTi came in today, loving it... It's my first Leatherman. The only other MT I had before was a Gerber MP600 (which definitely was nice) but I can tell just by holding it that the Charge is in a class of its own!
First off welcome to the forum. :tu:
I'm glad you like your Charge. They are a nice piece of Multitool goodness. :tu: If you think the Charge is in a class of its own you should try a Victorinox Swisstool Spirit. ;)
-
Just won a brand new original Wave :ahhh
(http://i.ebayimg.com/00/s/MTA2NlgxNjAw/z/JPUAAOSw-ndTniyz/$_57.JPG)
-
got my first Pulse! I like it very much!
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Pulse/20140618_185957.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Pulse/20140618_185957.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Pulse/20140618_190013.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Pulse/20140618_190013.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Pulse/20140618_190131.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Pulse/20140618_190131.jpg.html)
-
Just won a brand new original Wave :ahhh
cool tool 8) and with the nice old leather sheath too :tu:
-
Just won a brand new original Wave :ahhh
(http://i.ebayimg.com/00/s/MTA2NlgxNjAw/z/JPUAAOSw-ndTniyz/$_57.JPG)
Very nice. :drool:
The OG Wave is one of the Leathermans I have never owned, but wish I did. Let me know what you think when you get it. Looks to be in great shape. Congrats! :tu:
-
Sweet new OG-Wave Steve; looks like you really scored there :tu:
Same to you Detron with the Pulse :tu:. That's one of the retired LMs I'm still on the fence about trying to get.
-
Sweet new OG-Wave Steve; looks like you really scored there :tu:
Same to you Detron with the Pulse :tu:. That's one of the retired LMs I'm still on the fence about trying to get.
well, it has a diamond file, is basically reminiscent of a PST or PST II (closed shape), except for the rocker locks.
I like it, not as much as the PST itself, but it is really cool
-
Sweet new OG-Wave Steve; looks like you really scored there :tu:
Same to you Detron with the Pulse :tu:. That's one of the retired LMs I'm still on the fence about trying to get.
well, it has a diamond file, is basically reminiscent of a PST or PST II (closed shape), except for the rocker locks.
I like it, not as much as the PST itself, but it is really cool
Yeah, I've been curious how the rocker locks feel. Still, it's basically a PSTII with locking tools, and I'm not sure I really can justify buying one at this point, especially since most of any of them I've seen aren't cheap. Maybe eventually, but it's not a high priority on my list at the moment.
-
Sweet new OG-Wave Steve; looks like you really scored there :tu:
Same to you Detron with the Pulse :tu:. That's one of the retired LMs I'm still on the fence about trying to get.
It was a great score at $56.01. I outbid someone by under .50c! $4 shipping. I've been trolling the bay for one of these in new condition and this was a steal :D
This one will not be a user, BUT will reside at my station for frequent fondling purposes :drool:
-
Sweet new OG-Wave Steve; looks like you really scored there :tu:
Same to you Detron with the Pulse :tu:. That's one of the retired LMs I'm still on the fence about trying to get.
It was a great score at $56.01. I outbid someone by under .50c! $4 shipping. I've been trolling the bay for one of these in new condition and this was a steal :D
This one will not be a user, BUT will reside at my station for frequent fondling purposes :drool:
That is a good deal man. I'm curious if yours has the handle play like mine.
Sent from my XT901 using Tapatalk
-
Sweet new OG-Wave Steve; looks like you really scored there :tu:
Same to you Detron with the Pulse :tu:. That's one of the retired LMs I'm still on the fence about trying to get.
It was a great score at $56.01. I outbid someone by under .50c! $4 shipping. I've been trolling the bay for one of these in new condition and this was a steal :D
This one will not be a user, BUT will reside at my station for frequent fondling purposes :drool:
That is a good deal man. I'm curious if yours has the handle play like mine.
Sent from my XT901 using Tapatalk
I sure hope there's nothing wrong with it. It does look new as described from the pics they provided.
This will be one of my most prized tools. They're getting harder to get in this condition at a decent price. I think I just got lucky with this. There's another guy here (http://www.ebay.com/itm/351098004176?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT) who is selling them NIB for much more.
-
Sweet new OG-Wave Steve; looks like you really scored there :tu:
Same to you Detron with the Pulse :tu:. That's one of the retired LMs I'm still on the fence about trying to get.
It was a great score at $56.01. I outbid someone by under .50c! $4 shipping. I've been trolling the bay for one of these in new condition and this was a steal :D
This one will not be a user, BUT will reside at my station for frequent fondling purposes :drool:
That is a good deal man. I'm curious if yours has the handle play like mine.
Sent from my XT901 using Tapatalk
I sure hope there's nothing wrong with it. It does look new as described from the pics they provided.
This will be one of my most prized tools. They're getting harder to get in this condition at a decent price. I think I just got lucky with this. There's another guy here (http://www.ebay.com/itm/351098004176?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT) who is selling them NIB for much more.
Me too. It's really not a major deal to me like it was initially, and it sounds like it's rather common, so that helps me to feel better that I didn't necessarily get a dud. They are indeed hard to get new for an affordable price. I lucked out bigtime as mine was just under $40 with shipping included. You even got the original sheath as well, which I did not, but that's fine as I don't use them. Although it would have been nice to have just to put it in when not in use, but that's ok. I can't wait for you to get yours though :D
-
Sweet new OG-Wave Steve; looks like you really scored there :tu:
Same to you Detron with the Pulse :tu:. That's one of the retired LMs I'm still on the fence about trying to get.
It was a great score at $56.01. I outbid someone by under .50c! $4 shipping. I've been trolling the bay for one of these in new condition and this was a steal :D
This one will not be a user, BUT will reside at my station for frequent fondling purposes :drool:
That is a good deal man. I'm curious if yours has the handle play like mine.
Sent from my XT901 using Tapatalk
I sure hope there's nothing wrong with it. It does look new as described from the pics they provided.
This will be one of my most prized tools. They're getting harder to get in this condition at a decent price. I think I just got lucky with this. There's another guy here (http://www.ebay.com/itm/351098004176?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT) who is selling them NIB for much more.
Me too. It's really not a major deal to me like it was initially, and it sounds like it's rather common, so that helps me to feel better that I didn't necessarily get a dud. They are indeed hard to get new for an affordable price. I lucked out bigtime as mine was just under $40 with shipping included. You even got the original sheath as well, which I did not, but that's fine as I don't use them. Although it would have been nice to have just to put it in when not in use, but that's ok. I can't wait for you to get yours though :D
Just an estimate but it says it should be delivered Monday. I can't wait :ahhh
I was just thinking why don't they bring back the original Wave for a UK friendly version. I'm sure they'd sell like hot cakes if they did.
-
ST200
-
Sweet new OG-Wave Steve; looks like you really scored there :tu:
Same to you Detron with the Pulse :tu: . That's one of the retired LMs I'm still on the fence about trying to get.
It was a great score at $56.01. I outbid someone by under .50c! $4 shipping. I've been trolling the bay for one of these in new condition and this was a steal :D
This one will not be a user, BUT will reside at my station for frequent fondling purposes :drool:
That is a good deal man. I'm curious if yours has the handle play like mine.
Sent from my XT901 using Tapatalk
I sure hope there's nothing wrong with it. It does look new as described from the pics they provided.
This will be one of my most prized tools. They're getting harder to get in this condition at a decent price. I think I just got lucky with this. There's another guy here (http://www.ebay.com/itm/351098004176?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT) who is selling them NIB for much more.
Me too. It's really not a major deal to me like it was initially, and it sounds like it's rather common, so that helps me to feel better that I didn't necessarily get a dud. They are indeed hard to get new for an affordable price. I lucked out bigtime as mine was just under $40 with shipping included. You even got the original sheath as well, which I did not, but that's fine as I don't use them. Although it would have been nice to have just to put it in when not in use, but that's ok. I can't wait for you to get yours though :D
Just an estimate but it says it should be delivered Monday. I can't wait :ahhh
I was just thinking why don't they bring back the original Wave for a UK friendly version. I'm sure they'd sell like hot cakes if they did.
Knife blades on the original Wave still lock ;) It's just the inner tools that aren't locking. So it's actually exactly the wrong way around for a UK friendly MT :P
-
My mistake! I had forgotten all about the fact the blades lock on the original.
-
Sweet new OG-Wave Steve; looks like you really scored there :tu:
Same to you Detron with the Pulse :tu:. That's one of the retired LMs I'm still on the fence about trying to get.
It was a great score at $56.01. I outbid someone by under .50c! $4 shipping. I've been trolling the bay for one of these in new condition and this was a steal :D
This one will not be a user, BUT will reside at my station for frequent fondling purposes :drool:
That is a good deal man. I'm curious if yours has the handle play like mine.
Sent from my XT901 using Tapatalk
I sure hope there's nothing wrong with it. It does look new as described from the pics they provided.
This will be one of my most prized tools. They're getting harder to get in this condition at a decent price. I think I just got lucky with this. There's another guy here (http://www.ebay.com/itm/351098004176?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT) who is selling them NIB for much more.
Me too. It's really not a major deal to me like it was initially, and it sounds like it's rather common, so that helps me to feel better that I didn't necessarily get a dud. They are indeed hard to get new for an affordable price. I lucked out bigtime as mine was just under $40 with shipping included. You even got the original sheath as well, which I did not, but that's fine as I don't use them. Although it would have been nice to have just to put it in when not in use, but that's ok. I can't wait for you to get yours though :D
Just an estimate but it says it should be delivered Monday. I can't wait :ahhh
I was just thinking why don't they bring back the original Wave for a UK friendly version. I'm sure they'd sell like hot cakes if they did.
Problem is Sawman,even the OG Wave has locking blades :(
-
Wow, who else can say they got twenty Leatherman tools in one day?! :cheers: :cheers: Only half are staying with me though, the other half are going back in the box and continuing on their journey eastwards. :salute:
(http://img.photobucket.com/albums/v307/jooliesews/Bobbys/Bobbys%20II/lm1-10_zpsccb9d851.jpg)
First impressions:
Sweet little tools! I don't own any Atwoods for comparison, but these are very nice. :tu:
A great deal of form and function overlap between the various models though. ::) A more fitting numbering system would have been Leatherman 1.0, 1.1, 1.2, 4.0, 5.0, 6.0, 6.1, 6.2, 6.3, 6.4 :D
A big :twak: to the person in the shipping department who just threw all 20 tools into the box with no packing material. >:( The whole box "jingled" when I picked it up, with all the tools inside banging against one another. :P Fortunately no dents or dings though. (lucky for them, grrrr)
-
They're some sweet looking little tools. I hope they'll continue in this direction as I despise Atwood for their insane prices. :salute:
-
They seriously shipped them all together with no packing material. :think: WTF Leatherman. I know you ship them for free, but seriously. :twak:
Please oh please write them a e-mail just to let them know the shipping department are idiots. :poh:
-
Got some days ago my 2nd OG Wave. ...it was described as used. .but this tool is absolutely in new condition probably new used. So I gave a NIB OG Wave as self qeen and my 2nd will ve used around the house for light duty.And only paid 45$ shipped; )(http://img.tapatalk.com/d/14/06/22/bu9u7ybu.jpg)
ΜΟΛΩΝ ΛΑΒΕ......
-
Got some days ago my 2nd OG Wave. ...it was described as used. .but this tool is absolutely in new condition probably new used. So I gave a NIB OG Wave as self qeen and my 2nd will ve used around the house for light duty.And only paid 45$ shipped; )(http://img.tapatalk.com/d/14/06/22/bu9u7ybu.jpg)
ΜΟΛΩΝ ΛΑΒΕ......
Sweet score
Sent from my XT901 using Tapatalk
-
These are not complete tools, are add-ons, but I just picked up two Leatherman Tool Adapters at a hardware store at the beach where we were vacationing. One is for the Wave (probably the original Wave, not the one I have), and the other for the PST, Supertool, etc. These are both discontinued, and looking at the amount of dust that was on the packaging of both, were probably lying around a while!
-
These are not complete tools, are add-ons, but I just picked up two Leatherman Tool Adapters at a hardware store at the beach where we were vacationing. One is for the Wave (probably the original Wave, not the one I have), and the other for the PST, Supertool, etc. These are both discontinued, and looking at the amount of dust that was on the packaging of both, were probably lying around a while!
Good catch, these are less common nowadays. :tu:
-
The FUSE I bought on eBay arrived and it's in as new condition. Far better than the pic's and description led me to believe.
I quite like it. Never thought I would like the LMs with the Zytel inserts but it is better than I thought.
Was bidding on a BLASR from the same seller and bought the FUSE when I was outbid on that.
Actually like the tool load on the Fuse, all you need and none you don't for light day carry.
-
The FUSE I bought on eBay arrived and it's in as new condition. Far better than the pic's and description led me to believe.
I quite like it. Never thought I would like the LMs with the Zytel inserts but it is better than I thought.
Was bidding on a BLASR from the same seller and bought the FUSE when I was outbid on that.
Actually like the tool load on the Fuse, all you need and none you don't for light day carry.
I'll never get why LM discontinued the Fuse. It's one of my favorites. I love the long razor sharp blade and the entire tool loadout.
-
The FUSE I bought on eBay arrived and it's in as new condition. Far better than the pic's and description led me to believe.
I quite like it. Never thought I would like the LMs with the Zytel inserts but it is better than I thought.
Was bidding on a BLASR from the same seller and bought the FUSE when I was outbid on that.
Actually like the tool load on the Fuse, all you need and none you don't for light day carry.
I'll never get why LM discontinued the Fuse. It's one of my favorites. I love the long razor sharp blade and the entire tool loadout.
It's because the Wingman is so much better!
:twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak:
It's ok everyone,I feel better now!
-
The FUSE I bought on eBay arrived and it's in as new condition. Far better than the pic's and description led me to believe.
I quite like it. Never thought I would like the LMs with the Zytel inserts but it is better than I thought.
Was bidding on a BLASR from the same seller and bought the FUSE when I was outbid on that.
Actually like the tool load on the Fuse, all you need and none you don't for light day carry.
I'll never get why LM discontinued the Fuse. It's one of my favorites. I love the long razor sharp blade and the entire tool loadout.
It's because the Wingman is so much better!
:twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak:
It's ok everyone,I feel better now!
Was that sarcasm there Kirky :pok: :D
-
The FUSE I bought on eBay arrived and it's in as new condition. Far better than the pic's and description led me to believe.
I quite like it. Never thought I would like the LMs with the Zytel inserts but it is better than I thought.
Was bidding on a BLASR from the same seller and bought the FUSE when I was outbid on that.
Actually like the tool load on the Fuse, all you need and none you don't for light day carry.
I'll never get why LM discontinued the Fuse. It's one of my favorites. I love the long razor sharp blade and the entire tool loadout.
It's because the Wingman is so much better!
:twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak: :twak:
It's ok everyone,I feel better now!
Was that sarcasm there Kirky :pok: :D
Yes Sheldon :D
-
Lmao!
live from Nate's mobile
-
I found some old stock locally...go figure.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_5394small_zps0aec9c79.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_5394small_zps0aec9c79.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_5395small_zps5d113980.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_5395small_zps5d113980.jpg.html)
-
Nice finds!
-
Nice Fuse, it even has the new locks :D :drool:
-
You lucky dog you.
-
I may have to go back and buy another Fuse...I mean, they have them discounted to Kick prices to clear them.
-
This has been a leatherman kind if day ...
(http://img.tapatalk.com/d/14/07/04/u6upagyp.jpg)
Brüder, die Brüdern Helfen
-
This has been a leatherman kind if day ...
(http://img.tapatalk.com/d/14/07/04/u6upagyp.jpg)
Brüder, die Brüdern Helfen
The Crunch is an awesome tool! Although not my most often carried or used LM, it's by far my favorite!
-
Heinz! Nice to see you popping in man :tu:
-
Heinz! Nice to see you popping in man :tu:
+1 We've missed you buddy. Hope things are going well for you :cheers:
-
I have a little catching up to do here;
A neutered Fuse(knifeless ;) :D) + one of those 2009 Micra Star & Stripes beauties I got it on Oz Ebay for a bit over $35 delivered :o 8) 8)
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/SAM_2351_zps324027e2.jpg)
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/SAM_2353_zpse934a993.jpg)
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/SAM_2356_zps1f283b4d.jpg)
I am breaking my 'liberating all tools from the shackles of the clam shell' rule & leaving her tied up :o :D. I already have a very nice lightly used starie stripy to fondle :D
And finally these 3 ;
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/SAM_2308_zps7dbe7335.jpg)
I got the retired Piranha for $25 delivered(more Oz Ebay craziness 8)) & the new Surge + Skeletool CX for a very good price all the way from Israel :o 8) 8)
I think that is the last 18 months of my LM purchases :think: :think:
-
I have a little catching up to do here;
And welcome back, we've missed you :tu:
-
Nice additions Mat!
-
I have a little catching up to do here;
And welcome back, we've missed you :tu:
Thanks Greg , I have missed you crazy nutters as well :D :D
Nice additions Mat!
Thanks David :cheers: :cheers:
-
I have a little catching up to do here;
And welcome back, we've missed you :tu:
Thanks Greg , I have missed you crazy nutters as well :D :D
Nice additions Mat!
Thanks David :cheers: :cheers:
It's good to have you back Mat!
That Fuse...is it modded,or is it one of the factory ones?
-
Nice ones Mat :tu:
The place wasn't the same without you :cheers:
-
I have a little catching up to do here;
And welcome back, we've missed you :tu:
Thanks Greg , I have missed you crazy nutters as well :D :D
Nice additions Mat!
Thanks David :cheers: :cheers:
It's good to have you back Mat!
That Fuse...is it modded,or is it one of the factory ones?
Thanks guys :tu: :tu:
Kirky that be a factory castrated Fuse mate ;).
I have a wee obsession with retired LMs ::) :D. I held off getting a knifeless Fuse for a LONG time, I relented just before Christmas as the price was resonable & it got me entered in a Oz Leatherman promotion to win a Jeep.
I didn't win the Jeep BUT a person in my state did & that is how I got to meet Tim Leatherman for a second time. He hand delivered the Jeep to the winner 8) & then did a promotional meet & greet in the city , which included engraving LMs 8) 8)
-
Just bought the LM Raptor. Haven't used them much yet. But a very nice tool.
-
(http://s30.postimg.org/g3p5shd5d/P7085185_Kopiowanie.jpg) (http://postimage.org/)
:D
-
My latest is the ReCharge, thanks to Breezy :salute: Excellent work-I love it :tu: I should also mention the Rebar that I had the TTi's pliers put into the Rebar I sent. That will be going in the vehicle to live as a backup. Pics later :)
-
My latest is the ReCharge, thanks to Breezy :salute: Excellent work-I love it :tu: I should also mention the Rebar that I had the TTi's pliers put into the Rebar I sent. That will be going in the vehicle to live as a backup. Pics later :)
What about a Wingman for donor scissors? Am I missing something?
-
My latest is the ReCharge, thanks to Breezy :salute: Excellent work-I love it :tu: I should also mention the Rebar that I had the TTi's pliers put into the Rebar I sent. That will be going in the vehicle to live as a backup. Pics later :)
What about a Wingman for donor scissors? Am I missing something?
Haha, I guess you are, because I don't know what you mean ??? That may have been a good idea though, but I would have had to give up one of the four outer tools, which I wanted to keep. Plus I likely would have SAK scissors on me as well :tu:
-
Well now I'm even more confused. Because if your ReCharge still has the original scissors, then were they filed down to accommodate the Rebar pliers shutting?
-
Well now I'm even more confused. Because if your ReCharge still has the original scissors, then were they filed down to accommodate the Rebar pliers shutting?
Oh I see what you meant. Yeah, the scissors had to be ground down a bit to allow for the Rebar pliers. Not a big deal to me though, as those scissors are basically just a spare set, and they still work just fine :tu:
-
That makes sense then. All this time I wrongfully assumed you were getting one like Kampfer's "Mini Surge". That uses the Wingman scissors.
-
That makes sense then. All this time I wrongfully assumed you were getting one like Kampfer's "Mini Surge". That uses the Wingman scissors.
That isn't a bad idea though :think: It would make the ReCharge a great stand alone MT to carry, or great if one uses scissors a lot and wants a couple different sets of them, like one clean and one dirty.
-
They're great scissors, much better than the standard Wave/Charge ones.
Now I have you considering sending it back again :pok: :pok: >:D
-
They're great scissors, much better than the standard Wave/Charge ones.
Now I have you considering sending it back again :pok: :pok: >:D
Haha, I've never known you to be an enabler >:D ;)
-
Well now I'm even more confused. Because if your ReCharge still has the original scissors, then were they filed down to accommodate the Rebar pliers shutting?
Oh I see what you meant. Yeah, the scissors had to be ground down a bit to allow for the Rebar pliers. Not a big deal to me though, as those scissors are basically just a spare set, and they still work just fine :tu:
you should have just posted pics right away to avoid confusion. :pok: :D
glad to hear you're happy with the mod! :cheers:
-
I'm very happy, thanks Breezy!
-
Here are some pics of my ReCharge TTi :D
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140714_111232_147_zps53ebd63c.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140714_111232_147_zps53ebd63c.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140714_111346_433_zps02222575.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140714_111346_433_zps02222575.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140714_111452_896_zpsc971bb67.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140714_111452_896_zpsc971bb67.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140714_111620_298_zps9fbe59cd.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140714_111620_298_zps9fbe59cd.jpg.html)
-
Finally found a Pulse. :rofl:
-
Finally found a Pulse. :rofl:
Congratz! :cheers:
-
Also got a later model original wave, nobbly bits on the serrated knife, tool on the pliers, and riveted spring in the handles. Date codes 0802A/0802B. Had a great week, mr pinchy, Pulse and Original Wave! :cheers:
-
Also got a later model original wave, nobbly bits on the serrated knife, tool on the pliers, and riveted spring in the handles. Date codes 0802A/0802B. Had a great week, mr pinchy, Pulse and Original Wave! :cheers:
Great week and haul indeed :tu:
-
Also got a later model original wave, nobbly bits on the serrated knife, tool on the pliers, and riveted spring in the handles. Date codes 0802A/0802B. Had a great week, mr pinchy, Pulse and Original Wave! :cheers:
I got my OG Wave in mint condition so it's a shelf queen but one thing that really appeals to me about it is its light weight. Compared to the new Wave there is huge difference there.
-
I'm thinking of spending my last money for the month on a BO Wave.... used. ........ What do you guys say, yes or no :D :think:
-
I found a Leatherman Juice C-2 for $32.25 shipped.I couldn't resist so I bought it.Unlike some members,who don't seem to like the Juice line,I do.
-
I have a squirt ps4 which I bought lately.
I have mixed feelings about it. My first multitool was the swisstool whichI received just a couple days before the squirt, so maybe I can't help but compare them - which is unfair to the squirt
Still it somewhat didn't match my expectations
...
I'm not carrying it - preferring a SAK to it - and not giving any love to it really (and I feel sad about it).
maybe I need to learn it a bit more?
-
I got a 2013 Charge TTi from sticktodrum today, I'm liking it alot :multi:
-
BO Blast,thanks to Detron!
:woohoo: :woohoo: :woohoo: :woohoo: :woohoo: :woohoo:
-
BO Blast,thanks to Detron!
My first B.O. tool ever,was the Leatherman Blast.
It's alright.LOL.
-
I'm thinking of spending my last money for the month on a BO Wave.... used. ........ What do you guys say, yes or no :D :think:
Wrong crowd to ask if you wanna keep your pennies. :)
-
I have been carrying an S2 for the last couple of months but some thread here or at the other place peaked my interest in a PSTII. Won one on the bay and received it today. I had a PST from 1995 or so but it's long gone and I have had other newer Leathermans and Vics since then. I really dig this minimalist simple design. It's ~1oz heavier than my S2 but has some pluses over it I think. I'll see if pocket carrying it becomes annoying.
-
I'm thinking of spending my last money for the month on a BO Wave.... used. ........ What do you guys say, yes or no :D :think:
Wrong crowd to ask if you wanna keep your pennies. :)
Yep, true words! enki_ck is right
-
I'm thinking of spending my last money for the month on a BO Wave.... used. ........ What do you guys say, yes or no :D :think:
Yes! The black oxide wave is one of those tools that looks better as it wears in, getting scratched and faded.
-
A Kick with a bit of a kick.
Scissors transferred from a Fuse. The cap lifter had to swap handles with the lanyard ring to make sufficient room for the scissors but an unanticipated bonus there, my nails couldn't reach the cap-lifter inboard nail nick but now the nail nick is outboard, though unlike the main blade it doesn't quite align with a finger groove. But this is one occasion when clumping is a benefit. I think LM could have done better with an aligned outboard nail nick on the Kick/Fuse cap lifter.
I love the completely smooth snag-free exterior of the Kick when folded. Given it is legal UK carry I'll alternate EDC with my Juice S2.
(just realised I didn't picture the lanyard ring but it is there outboard of the scissors)
-
How come I didn't see all these replies :think:
Anyway, a BO Wave is arriving tomorrow. My last pay cheque for the month :facepalm: Till the end of the month I'll be eating cut wire, sliced paper, screw salad with WD40 dressing.. :facepalm:
[A good way to drop some kilos :D:D]
:woohoo:
-
How come I didn't see all these replies :think:
Anyway, a BO Wave is arriving tomorrow. My last pay cheque for the month :facepalm: Till the end of the month I'll be eating cut wire, sliced paper, screw salad with WD40 dressing.. :facepalm:
[A good way to drop some kilos :D:D]
:woohoo:
The WAVE is a great tool and the BO makes it just that much better. :tu:
-
A Kick with a bit of a kick.
Scissors transferred from a Fuse. The cap lifter had to swap handles with the lanyard ring to make sufficient room for the scissors but an unanticipated bonus there, my nails couldn't reach the cap-lifter inboard nail nick but now the nail nick is outboard, though unlike the main blade it doesn't quite align with a finger groove. But this is one occasion when clumping is a benefit. I think LM could have done better with an aligned outboard nail nick on the Kick/Fuse cap lifter.
I love the completely smooth snag-free exterior of the Kick when folded. Given it is legal UK carry I'll alternate EDC with my Juice S2.
(just realised I didn't picture the lanyard ring but it is there outboard of the scissors)
I went the whole hog and dropped the blade :multi:
-
A Kick with a bit of a kick.
Scissors transferred from a Fuse. The cap lifter had to swap handles with the lanyard ring to make sufficient room for the scissors but an unanticipated bonus there, my nails couldn't reach the cap-lifter inboard nail nick but now the nail nick is outboard, though unlike the main blade it doesn't quite align with a finger groove. But this is one occasion when clumping is a benefit. I think LM could have done better with an aligned outboard nail nick on the Kick/Fuse cap lifter.
I love the completely smooth snag-free exterior of the Kick when folded. Given it is legal UK carry I'll alternate EDC with my Juice S2.
(just realised I didn't picture the lanyard ring but it is there outboard of the scissors)
I went the whole hog and dropped the blade :multi:
Did you put a file in instead?
-
I have been carrying an S2 for the last couple of months but some thread here or at the other place peaked my interest in a PSTII. Won one on the bay and received it today. I had a PST from 1995 or so but it's long gone and I have had other newer Leathermans and Vics since then. I really dig this minimalist simple design. It's ~1oz heavier than my S2 but has some pluses over it I think. I'll see if pocket carrying it becomes annoying.
Very cool APS. I hope you're liking it as much as I am mine.
It shouldn't be annoying carrying it... it's a minuscule amount longer and much thinner.
-
My OHT has arrived! :woohoo: :woohoo: :woohoo: :woohoo:
-
A Kick with a bit of a kick.
Scissors transferred from a Fuse. The cap lifter had to swap handles with the lanyard ring to make sufficient room for the scissors but an unanticipated bonus there, my nails couldn't reach the cap-lifter inboard nail nick but now the nail nick is outboard, though unlike the main blade it doesn't quite align with a finger groove. But this is one occasion when clumping is a benefit. I think LM could have done better with an aligned outboard nail nick on the Kick/Fuse cap lifter.
I love the completely smooth snag-free exterior of the Kick when folded. Given it is legal UK carry I'll alternate EDC with my Juice S2.
(just realised I didn't picture the lanyard ring but it is there outboard of the scissors)
I went the whole hog and dropped the blade :multi:
Did you put a file in instead?
It's first format had the large and small bit drivers out of a Wave,as well as scissors . The bit driver was scavenged for the P.U.G
It now has the large flat driver and Phillips/scissors,small bit driver and small flat driver,with a spacer.
I've never been able to get a hold of a spare file to drop into it
-
A Kick with a bit of a kick.
Scissors transferred from a Fuse. The cap lifter had to swap handles with the lanyard ring to make sufficient room for the scissors but an unanticipated bonus there, my nails couldn't reach the cap-lifter inboard nail nick but now the nail nick is outboard, though unlike the main blade it doesn't quite align with a finger groove. But this is one occasion when clumping is a benefit. I think LM could have done better with an aligned outboard nail nick on the Kick/Fuse cap lifter.
I love the completely smooth snag-free exterior of the Kick when folded. Given it is legal UK carry I'll alternate EDC with my Juice S2.
(just realised I didn't picture the lanyard ring but it is there outboard of the scissors)
I went the whole hog and dropped the blade :multi:
Did you put a file in instead?
It's first format had the large and small bit drivers out of a Wave,as well as scissors . The bit driver was scavenged for the P.U.G
It now has the large flat driver and Phillips/scissors,small bit driver and small flat driver,with a spacer.
I've never been able to get a hold of a spare file to drop into it
I like the idea of a more useful Kick for use in the UK - adding a file would be very nice and maybe scissors too if I can squeeze them in. I'm going to try a SOG file first because you can get them from Heinnie.
-
I just scored an as-new original PST here in New Zealand for just over $20USD...
No pictures yet as I don't get it until Thursday.
Very excited as I've been EDCing my '03 PST2 for the last week and have been loving it.
-
Nice one! PST, the original and the best! :tu:
-
I just scored an as-new original PST here in New Zealand for just over $20USD...
No pictures yet as I don't get it until Thursday.
Very excited as I've been EDCing my '03 PST2 for the last week and have been loving it.
Nice. :) I got stuck at work and missed out on the Gerber. :(
-
I just scored an as-new original PST here in New Zealand for just over $20USD...
No pictures yet as I don't get it until Thursday.
Very excited as I've been EDCing my '03 PST2 for the last week and have been loving it.
That sounds like a great score man :tu:
-
I just scored an as-new original PST here in New Zealand for just over $20USD...
No pictures yet as I don't get it until Thursday.
Very excited as I've been EDCing my '03 PST2 for the last week and have been loving it.
Nice. :) I got stuck at work and missed out on the Gerber. :(
Have you been keeping an eye on loftynz on Trademe Zoidberg? I don't know where he gets all his stuff from.
I just bought a bunch of damaged SAKs from him for some spare parts for mods (scissors and rear phillips drivers). No idea where he gets this amount of stuff from.
-
I just scored an as-new original PST here in New Zealand for just over $20USD...
No pictures yet as I don't get it until Thursday.
Very excited as I've been EDCing my '03 PST2 for the last week and have been loving it.
Nice. :) I got stuck at work and missed out on the Gerber. :(
Have you been keeping an eye on loftynz on Trademe Zoidberg? I don't know where he gets all his stuff from.
I just bought a bunch of damaged SAKs from him for some spare parts for mods (scissors and rear phillips drivers). No idea where he gets this amount of stuff from.
Kind of, sometimes. Too many watch him so deals are harder to get. You did well.
-
My Rebar was in the mail yesterday! :mail: :D
I had an "office only" day at work, so now I´m running around in the house, looking for something to use it for... :ahhh
-
My OHT should be here tomorrow :excited:
-
My BO Blast turned up from Leatherman. That's two stainless and one BO now.
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/96CE57BE-695C-4B6F-BE1D-01AEECB44EEB_zpskhfycqvb.jpg)
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/4D027D3E-4416-4CE0-A5CE-56F5FC8575E5_zpskcawgd2b.jpg)
-
That BO looks so good! :drool:
-
I dont have the latest one but 9 months back "Leatherman Wave" version was added to by inventory. I am still satisfied with its easy to handle and providing great pocket sized feature knife. It is something incredibly useful with you, wherever you go.
-
My OHT came yesterday and it is everything I hoped for...the reviews are right, the blade is a little small and the finish looks used right out of the box, but that just adds to the character of it. I already made a leather pouch for it too
-
Here's a pic (http://img.tapatalk.com/d/14/07/25/ha8u5eru.jpg)
-
Nice pouch. I only handled a OHT once and while used its seemed like a solid tool.
-
Thank you ,it is a very solid tool
-
Just got the Number 5 pockettool :tu:
My initial reaction. If your complaint about the Piranah/Croc is that they're too big. The Number 5 solves that problem :tu:
-
My BO Blast turned up from Leatherman. That's two stainless and one BO now.
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/96CE57BE-695C-4B6F-BE1D-01AEECB44EEB_zpskhfycqvb.jpg)
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/4D027D3E-4416-4CE0-A5CE-56F5FC8575E5_zpskcawgd2b.jpg)
I don't know if I like the look of the blast, those Zytel inserts in the handles make the tool look cheap and nasty.
Just my 2c
-
My BO Blast turned up from Leatherman. That's two stainless and one BO now.
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/96CE57BE-695C-4B6F-BE1D-01AEECB44EEB_zpskhfycqvb.jpg)
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/4D027D3E-4416-4CE0-A5CE-56F5FC8575E5_zpskcawgd2b.jpg)
I don't know if I like the look of the blast, those Zytel inserts in the handles make the tool look cheap and nasty.
Just my 2c
I thought the same when I got my Core. Looking into it, the plastic is super strong, and will outlast the steel under normal conditions.
-
I picked up a 0499 PST ll at a flea market today. I paid a little more than I normally would ($28) but it was the first LM I've seen at a flea marked in a while. Normally PST/PST ll's go for around $10 to $15 at this flea market. It appears not to have been used, the original sheath does show signs of being worn. It will fit in with the 6 other PST ll's I have.
-
PST2, 2*PST, ST200
-
:drool: :drool: :drool:
I love NIB tools. Nice score!
-
PST2, 2*PST, ST200
Great score! :tu:
-
Nice haul of Leathermans Loki :tu:
-
My new to me Super Tool arrived today, date codes 0894 & 1094.
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg4_zpsffbce720.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg4_zpsffbce720.jpg.html)
I really like that saber blade.
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg3_zps2a925b9a.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg3_zps2a925b9a.jpg.html)
No hard wire cutters and check out the large plier pivot.
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg2_zpsf9077121.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg2_zpsf9077121.jpg.html)
Here it is with a few of my other Super Tools.
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg1_zpsf1b79960.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg1_zpsf1b79960.jpg.html)
-
My new to me Super Tool arrived today, date codes 0894 & 1094.
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg4_zpsffbce720.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg4_zpsffbce720.jpg.html)
I really like that saber blade.
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg3_zps2a925b9a.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg3_zps2a925b9a.jpg.html)
No hard wire cutters and check out the large plier pivot.
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg2_zpsf9077121.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg2_zpsf9077121.jpg.html)
Here it is with a few of my other Super Tools.
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg1_zpsf1b79960.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg1_zpsf1b79960.jpg.html)
:dd: looks nice :dd:
-
Nice, shiny Supertool bdAmmo, and it looks like a saber point blade as well :tu:
-
My Rebar should be here tomorrow :ahhh
I turned my other one into a PST III (switched heads with my Charge TTi)
-
:dd: looks nice :dd:
Nice, shiny Supertool bdAmmo, and it looks like a saber point blade as well :tu:
Thanks guys :salute: yep, it's a saber point blade :D
-
:dd: looks nice :dd:
Nice, shiny Supertool bdAmmo, and it looks like a saber point blade as well :tu:
Thanks guys :salute: yep, it's a saber point blade :D
Those early Supertools are :multi:. There's at least 3 version of the Saber blade, ground by machine differently or hand ground? Here's a pick, I've got three and the grinds are all different, see the nail nick relative to the grind.
-
Hello guys and gals,
I'm new to the forum and just want to share my Leatherman multitools.
Cheers!
-
Welcome to the forum ace.chen :cheers: Nice bunch of shiny steel LM goodness :tu:
-
a picture in the first post! :ahhh
welcome ace.chen!
-
Hello guys and gals,
I'm new to the forum and just want to share my Leatherman multitools.
Cheers!
:woohoo: Two new kiwis in the same week! :woohoo:
Welcome to the forums mate. :cheers: Where abouts are you?
-
Hi Zoidberg
Not a Kiwi. :)
Currently living in Auckland and of Filipino-Chinese descent. Migrated to NZ circa 2009.
-
Hi Zoidberg
Not a Kiwi. :)
Currently living in Auckland and of Filipino-Chinese descent. Migrated to NZ circa 2009.
(http://i833.photobucket.com/albums/zz255/detronphillips/smileys/troll-dancing-smiley-emoticon.gif) (http://s833.photobucket.com/user/detronphillips/media/smileys/troll-dancing-smiley-emoticon.gif.html)
-
Hi Zoidberg
Not a Kiwi. :)
Currently living in Auckland and of Filipino-Chinese descent. Migrated to NZ circa 2009.
Umm... :think: okay...
-
BO Rebar.
What a nice surprise that one was. Having owned a large and heavy ST300 this came as a 'refreshment'.
I'd say Rebar would make a perfect EDC MT for many although it's hard to beat Wave and Skeletool in that category, IMO.
-
I'm still waiting got my BO wave, it's killing me waiting... >:(
-
must got me a Surge in Black Oxide. I opted for the BO because I got a good deal on a returned item but now I can see why they sent it back. Same problems as with the OHT when I got it, however it did wear in somewhat over time. Some tools aren't locking properly and the black is patchy at best, not to mention coming off onto my hands. Anyone else have these issues?
-
I think I got some BO on my hands, too, haha, from my Wave. But as I bought it used, I wasn't sure it was the BO or dirt of some sort. Well, since I'd washed it and the above comment now, I assume it was the BO.
-
So I have a 'Sidekick' in the mail.
http://www.ebay.com.au/itm/151373519425?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
That's funny...I don't remember the Sidekick having a bit driver :cheers:
-
So I have a 'Sidekick' in the mail.
http://www.ebay.com.au/itm/151373519425?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
That's funny...I don't remember the Sidekick having a bit driver :cheers:
Not a bad deal at all :tu: I thought Sidekicks were a lot smaller - that one looks like it might weigh your pocket down somewhat, and it seems to have a small manufacturing defect, they stamped the handle with "Surge", not "Sidekick" :D
-
So I have a 'Sidekick' in the mail.
http://www.ebay.com.au/itm/151373519425?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
That's funny...I don't remember the Sidekick having a bit driver :cheers:
You got yourself a great deal there! :tu:
-
So I have a 'Sidekick' in the mail.
http://www.ebay.com.au/itm/151373519425?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
That's funny...I don't remember the Sidekick having a bit driver :cheers:
You got yourself a great deal there! :tu:
Thanks. I really didn't need it, but for the price I couldn't pass it up. Not sure what will happen to it- will probably end up a gift for someone.
-
My BO Wave finally arrived! :mail: The Molle Sheath is Crap! Gonna exchange it for a leather one! 8)
-
My BO Wave finally arrived! :mail: The Molle Sheath is Crap! Gonna exchange it for a leather one! 8)
If interested, I've got a spare Surge leather sheath you could have for cheap? PM if you want.
-
My BO Wave finally arrived! :mail: The Molle Sheath is Crap! Gonna exchange it for a leather one! 8)
If interested, I've got a spare Surge leather sheath you could have for cheap? PM if you want.
No need buddy, the seller is gonna exchange it for me for free, but thanks for the offer! :tu:
-
My BO Wave finally arrived! :mail: The Molle Sheath is Crap! Gonna exchange it for a leather one! 8)
If interested, I've got a spare Surge leather sheath you could have for cheap? PM if you want.
No need buddy, the seller is gonna exchange it for me for free, but thanks for the offer! :tu:
No dramas, that's good of the seller :tu:
-
My BO Wave finally arrived! :mail: The Molle Sheath is Crap! Gonna exchange it for a leather one! 8)
If interested, I've got a spare Surge leather sheath you could have for cheap? PM if you want.
No need buddy, the seller is gonna exchange it for me for free, but thanks for the offer! :tu:
No dramas, that's good of the seller :tu:
Sure is! I'm very happy with my purchase! :D
-
Just received a new Micra, as a replacement to my stolen Style CS.
Love the Micra's simple utalitarian looks and tumbled finish...I wish my ST300 came in this finish too as oposed to 'fancy' brushed. :)
-
Got two new acquisitions
I got a nice purple juice Xe6 a couple of weeks ago that haven´t got time to play around with.(but that´s gonna change now)
And I like my Rebar so much that I finally had to get the bo one.
-
Got two new acquisitions
I got a nice purple juice Xe6 a couple of weeks ago that haven´t got time to play around with.(but that´s gonna change now)
And I like my Rebar so much that I finally had to get the bo one.
My condolences on the Juice. Congrats on the BO Rebar, it's a great tool :tu:
-
Got two new acquisitions
I got a nice purple juice Xe6 a couple of weeks ago that haven´t got time to play around with.(but that´s gonna change now)
And I like my Rebar so much that I finally had to get the bo one.
My condolences on the Juice. Congrats on the BO Rebar, it's a great tool :tu:
:rofl: I feel the same way about the Juice line, just not my thing. Congrats on the new acquisitions :tu:
-
So I have a 'Sidekick' in the mail.
http://www.ebay.com.au/itm/151373519425?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
That's funny...I don't remember the Sidekick having a bit driver :cheers:
Whoa; that's unreal -- how'd you find that?? Someone isn't paying attention to the details, but obviously you did. :tu:
Perhaps we all should start doing 'Sidekick' searches on FleEzbay!
I don't want to speak out of turn, but do you mind saying how much you paid? I admit to being totally, morbidly curious... >:D
-
Got two new acquisitions
I got a nice purple juice Xe6 a couple of weeks ago that haven´t got time to play around with.(but that´s gonna change now)
And I like my Rebar so much that I finally had to get the bo one.
My condolences on the Juice. Congrats on the BO Rebar, it's a great tool :tu:
:rofl: I feel the same way about the Juice line, just not my thing. Congrats on the new acquisitions :tu:
:rofl: Yes, there is something there that makes me think that Sawman maybe doesn´t like the juice line.
-
So I have a 'Sidekick' in the mail.
http://www.ebay.com.au/itm/151373519425?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
That's funny...I don't remember the Sidekick having a bit driver :cheers:
Whoa; that's unreal -- how'd you find that?? Someone isn't paying attention to the details, but obviously you did. :tu:
Perhaps we all should start doing 'Sidekick' searches on FleEzbay!
I don't want to speak out of turn, but do you mind saying how much you paid? I admit to being totally, morbidly curious... >:D
Just came up in my normal Ebay search (I don't search for specific models, partly because of listings like this one). I could tell straight away from the pics that it wasn't a Sidekick so had a closer look. Seller accepted my offer for $19 USD :D Postage is still costing me $25 USD but still a good deal.
-
I totally forgot I bought a JPST. I have been busy with work and getting ready to move and voila it shows up. Can you really ever have enough PSTs let alone JPSTs............. I think not.
-
I totally forgot I bought a JPST. I have been busy with work and getting ready to move and voila it shows up. Can you really ever have enough PSTs let alone JPSTs............. I think not.
I only have 4 PSTs but I'd like to get more :salute:
-
I totally forgot I bought a JPST. I have been busy with work and getting ready to move and voila it shows up. Can you really ever have enough PSTs let alone JPSTs............. I think not.
I only have 4 PSTs but I'd like to get more :salute:
So many variations so little money. I think this makes 10 JPSTs for me :think: maybe 8........ :think:
-
I totally forgot I bought a JPST. I have been busy with work and getting ready to move and voila it shows up. Can you really ever have enough PSTs let alone JPSTs............. I think not.
I only have 4 PSTs but I'd like to get more :salute:
So many variations so little money. I think this makes 10 JPSTs for me :think: maybe 8........ :think:
I have 3 of my preferred early 90's models in new condition and 1 new late model with the outward drivers.
-
I totally forgot I bought a JPST. I have been busy with work and getting ready to move and voila it shows up. Can you really ever have enough PSTs let alone JPSTs............. I think not.
I only have 4 PSTs but I'd like to get more :salute:
So many variations so little money. I think this makes 10 JPSTs for me :think: maybe 8........ :think:
You do not need to build a garage out of them :rofl: sounds amazing! very nice!
-
Just got my first Core in the mail today. (pics later when I feel up to it)
I am surprised that unlike the Blast/Fuse/Kick line, the Zytel does not act as a grip of any sort.
the one I got is date code 0708/0708 and seems to be basically unused.
-
Just got my first Core in the mail today. (pics later when I feel up to it)
I am surprised that unlike the Blast/Fuse/Kick line, the Zytel does not act as a grip of any sort.
the one I got is date code 0708/0708 and seems to be basically unused.
I was also surprised by this as well. Big tool and good variety of implements
-
When the zytel handles first came out I didn't care for them so much but they grew on me. One tool I'd really like to see them bring back, besides the PST, is the Fuse. EXCELLENT MT IMO!
-
Just got my first Core in the mail today. (pics later when I feel up to it)
I am surprised that unlike the Blast/Fuse/Kick line, the Zytel does not act as a grip of any sort.
the one I got is date code 0708/0708 and seems to be basically unused.
I was also surprised by this as well. Big tool and good variety of implements
does your Core have a sort of reverse belly? mine does, but it looks like a factory edge. basically, if I lay the cutting edge on the table, the area near the tang touches the table, and the area about an inch from the tip touches, but the area between misses the table by a millimeter or so.
sort of like the bottom one in this picture, but very mild, (this was the best way to show you what I mean)
(http://www.maxvenom.com/sites/default/files/tarakans_russian_martial_art_knife/03_tarakans_backbite.jpg)
-
My tools are packed away but I don't remember the recurve on the main blade.
-
A black Style PS landed in the mail today
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10345986_10153246380716664_7870954036686374200_n.jpg?oh=152c9f39a008076ab20d91d7388be712&oe=544518A2&__gda__=1413425885_b3f4892f882549e374d5e30ef45ea5c5)
-
Today the OHT arrived.
-
You will love the oht it is a great tool
-
It is :tu: - just bigger blades would be nice.
-
Just got my first Core in the mail today. (pics later when I feel up to it)
I am surprised that unlike the Blast/Fuse/Kick line, the Zytel does not act as a grip of any sort.
the one I got is date code 0708/0708 and seems to be basically unused.
I was also surprised by this as well. Big tool and good variety of implements
It's a solid tool. I'd heard lots of stories about the locks breaking, bought mine cheap when they were being discontinued. I was hoping to beat it hard in work for a few years then trade it in for a 300 when the inevitable break happened. It never broke, and still comes with me to work every day. If it broke now I'd have to ask for a repair for sentimental reasons.
-
Just picked up a new Wave in the box, for $9.97 at Walmart.
it was on a locked shelf, and the price sticker SKU matched the Wave SKU, but the price was wrong.
the guy rang it up and went, HOLD UP, that is not the price I just saw, so he got the manager, and they gave it to me at the great price, I did not even have to ask.
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/20140808_155530.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/20140808_155530.jpg.html)
-
Just picked up a new Wave in the box, for $9.97 at Walmart.
it was on a locked shelf, and the price sticker SKU matched the Wave SKU, but the price was wrong.
the guy rang it up and went, HOLD UP, that is not the price I just saw, so he got the manager, and they gave it to me at the great price, I did not even have to ask.
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/20140808_155530.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/20140808_155530.jpg.html)
Great find, that's a STEAL!!!
-
Just picked up a new Wave in the box, for $9.97 at Walmart.
it was on a locked shelf, and the price sticker SKU matched the Wave SKU, but the price was wrong.
the guy rang it up and went, HOLD UP, that is not the price I just saw, so he got the manager, and they gave it to me at the great price, I did not even have to ask.
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/20140808_155530.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/20140808_155530.jpg.html)
I never go "You have to....," or "But the price says...."
this time the clerk said "you deserve it at that price" Manager agreed. all they asked of me is if they could have the bar code off of the back of the box (physically removed) so they could show that they Sku and barcode matched. I cut it right off for them without a care in the world. :D
Great find, that's a STEAL!!!
-
Just got my first Core in the mail today. (pics later when I feel up to it)
I am surprised that unlike the Blast/Fuse/Kick line, the Zytel does not act as a grip of any sort.
the one I got is date code 0708/0708 and seems to be basically unused.
I was also surprised by this as well. Big tool and good variety of implements
does your Core have a sort of reverse belly? mine does, but it looks like a factory edge. basically, if I lay the cutting edge on the table, the area near the tang touches the table, and the area about an inch from the tip touches, but the area between misses the table by a millimeter or so.
sort of like the bottom one in this picture, but very mild, (this was the best way to show you what I mean)
(http://www.maxvenom.com/sites/default/files/tarakans_russian_martial_art_knife/03_tarakans_backbite.jpg)
Most come with that little recurve. I think the idea is the belly will be used and sharpened more so they give you a little extra steel there to begin with. Nice score with that Wave.
-
That's a serious steal Detron! Nice score indeed
-
A Wave for $10!!! :ahhh
-
I notice Bunnings here now stock Sidekicks.
Unfortunately, upon closer inspection, they were indeed Sidekicks.
-
I notice Bunnings here now stock Sidekicks.
Unfortunately, upon closer inspection, they were indeed Sidekicks.
I don't like the Sidekick at all. :td: I'm a Wingman fan..
-
I notice Bunnings here now stock Sidekicks.
Unfortunately, upon closer inspection, they were indeed Sidekicks.
Price?
-
I notice Bunnings here now stock Sidekicks.
Unfortunately, upon closer inspection, they were indeed Sidekicks.
Price?
$78 I think :think:
Fishpond's prices for Leathermans are getting more sensible than some other places: http://www.fishpond.co.nz/q/Leatherman?rid=35677564
-
I notice Bunnings here now stock Sidekicks.
Unfortunately, upon closer inspection, they were indeed Sidekicks.
Price?
$78 I think :think:
Brutal. ::)
-
I notice Bunnings here now stock Sidekicks.
Unfortunately, upon closer inspection, they were indeed Sidekicks.
Price?
$78 I think :think:
Brutal. ::)
:facepalm: i wonder if they have sold any yet? :twak:
-
I just got a Squirt P4 in a trade here. I haven't used it much, but it disappears in my pocket so I will carry it for awhile and test it out.
-
I just won an eBay auction with an OG Wave, Skeletool CX, PST & OG Super Tool, they're all a bit rusty but nothing a good clean & lube shouldnt fix. Not bad for US$93. Sorry if i bet a fellow MTO member, they missed out by about 30 seconds with the same max bid. :pok:
-
I just got a Squirt P4 in a trade here. I haven't used it much, but it disappears in my pocket so I will carry it for awhile and test it out.
I really like the P4. :tu:
-
I just won an eBay auction with an OG Wave, Skeletool CX, PST & OG Super Tool, they're all a bit rusty but nothing a good clean & lube shouldnt fix. Not bad for US$93. Sorry if i bet a fellow MTO member, they missed out by about 30 seconds with the same max bid. :pok:
Good haul! :tu:
-
No kidding! Very good haul.
That's us mobile.
-
I just got a Squirt P4 in a trade here. I haven't used it much, but it disappears in my pocket so I will carry it for awhile and test it out.
I really like the P4. :tu:
Im really enjoying it. Its so compact that its a no brainer to throw it in my pocket, and i really like the outboard tools. I love my micra but the inboard tools on such a small tool are a bit of a pain.
Sent from my SM-G900V using Tapatalk
-
I notice Bunnings here now stock Sidekicks.
Unfortunately, upon closer inspection, they were indeed Sidekicks.
Price?
$78 I think :think:
Fishpond's prices for Leathermans are getting more sensible than some other places: http://www.fishpond.co.nz/q/Leatherman?rid=35677564
If Fishpond is anything like it was when I used to work there, if anything isn't stocked in their warehouse (i.e. 24 hour shipping) or ships from overseas, you'll probably never see it.
Even the staff there knew not to buy anything like that. People would buy textbooks for uni months in advance, they'd keep getting emails saying the product was delayed, then they'd cancel the order.
Boo Fishpond.
-
I just won an eBay auction with an OG Wave, Skeletool CX, PST & OG Super Tool, they're all a bit rusty but nothing a good clean & lube shouldnt fix. Not bad for US$93. Sorry if i bet a fellow MTO member, they missed out by about 30 seconds with the same max bid. :pok:
Good haul! :tu:
No kidding! Very good haul.
That's us mobile.
Yeah I reckon hey! :cheers:
-
Just fished a like new ST300 out of the bay and tomorrow it will be on it's way to my son's house! Very excited to see how he likes it.
Bob
-
Just fished a like new ST300 out of the bay and tomorrow it will be on it's way to my son's house! Very excited to see how he likes it.
Bob
Nice work Bob, your son is lucky to have a father who would do something like that for him :salute:
The ST300 is an excellent tool too- one of my most used Leathermans.
-
Picked up a SS Wave in great condition, looks very lightly used if at all, date coded 12/13 both sides. The sheath ( nylon ) is also in terrific shape. Hmm now what to do with it??
-
Picked up a SS Wave in great condition, looks very lightly used if at all, date coded 12/13 both sides. The sheath ( nylon ) is also in terrific shape. Hmm now what to do with it??
put a S30V blade into it? :pok: rebar head?
-
Hmmm thats a good idea actually but I was thinking trade possibly. Just have to think about what I'd like :think:.
-
I notice Bunnings here now stock Sidekicks.
Unfortunately, upon closer inspection, they were indeed Sidekicks.
Price?
$78 I think :think:
Fishpond's prices for Leathermans are getting more sensible than some other places: http://www.fishpond.co.nz/q/Leatherman?rid=35677564
Picked up the sidekick as a keep in car mt from Bunnings in Perth for $58.00.
-
I have a wave coming from a trade here.
Sent from my SM-G900V using Tapatalk
-
If Fishpond is anything like it was when I used to work there, if anything isn't stocked in their warehouse (i.e. 24 hour shipping) or ships from overseas, you'll probably never see it.
Even the staff there knew not to buy anything like that. People would buy textbooks for uni months in advance, they'd keep getting emails saying the product was delayed, then they'd cancel the order.
Boo Fishpond.
Good to know - although I recently bought a molle pouch through them which shipped from the UK, and it arrived (eventually).
-
Good to know - although I recently bought a molle pouch through them which shipped from the UK, and it arrived (eventually).
[/quote]
What is the quality of your molle sheath like? I had a 4 inch sent out recently and it was really thin and cheap looking, pretty much a piece of crap so I sent it back. But my older 4.5 inch molle sheath is really strong and well made... :think:
-
I picked up 8 Micra's (5 stainless, 1 black, 1 blue and 1 purple plastic sleeve over stainless, 1 Style CS and beat up red Squirt P4. I promptly sold the Style CS to a work buddy.
-
What is the quality of your molle sheath like? I had a 4 inch sent out recently and it was really thin and cheap looking, pretty much a piece of crap so I sent it back. But my older 4.5 inch molle sheath is really strong and well made... :think:
When I say pouch it really is a pouch and not a sheath. About the size of a 1 litre juice carton, maybe bigger, with a good lid and a drawstring bit inside to keep the weather out. Made by Mil-tec I think - looks like good quality. I will use it for hiking to keep camera, hat, sunglasses, snacks, SAK, etc close to hand without needing to take my pack off.
I'll post about it in the Outdoor section some time...
-
What is the quality of your molle sheath like? I had a 4 inch sent out recently and it was really thin and cheap looking, pretty much a piece of crap so I sent it back. But my older 4.5 inch molle sheath is really strong and well made... :think:
When I say pouch it really is a pouch and not a sheath. About the size of a 1 litre juice carton, maybe bigger, with a good lid and a drawstring bit inside to keep the weather out. Made by Mil-tec I think - looks like good quality. I will use it for hiking to keep camera, hat, sunglasses, snacks, SAK, etc close to hand without needing to take my pack off.
I'll post about it in the Outdoor section some time...
Ah ok, sounds good! :D
-
I gave in and bought my first pst from 1990
-
I gave in and bought my first pst from 1990
You're in for a real treat, the PST is the best :2tu:
-
I gave in and bought my first pst from 1990
Nice dude, the PST is a cool tool :tu:
-
I gave in and bought my first pst from 1990
Nice dude, the PST is a cool tool :tu:
yep, love the PST. it just has a great feel to it.
-
I just bought a LM Rebar and hopefully will recieve it during next week
:multi: :gimme:
-
I just bought a LM Rebar and hopefully will recieve it during next week
:multi: :gimme:
Excellent choice, Sir.
Be sure and let us know how you like it :D
-
Awaiting my blast. :)
-
Awaiting my blast. :)
that is one of my favorite MTs of all time. I love my Blasts!
-
Awaiting my blast. :)
that is one of my favorite MTs of all time. I love my Blasts!
Its my first MT. I keep checking the parcel tracking.
-
Awaiting my blast. :)
that is one of my favorite MTs of all time. I love my Blasts!
Its my first MT. I keep checking the parcel tracking.
while you are :drool: and waiting for :mail:
here is some Blast porn (http://forum.multitool.org/index.php/topic,53357.msg915573.html#msg915573)
-
Awaiting my blast. :)
Lucky bug.
while you are :drool: and waiting for :mail:
here is some Blast porn (http://forum.multitool.org/index.php/topic,53357.msg915573.html#msg915573)
You are an evil man my budget is dry enough with that thermite on the way.
-
while you are :drool: and waiting for :mail:
here is some Blast porn (http://forum.multitool.org/index.php/topic,53357.msg915573.html#msg915573)
You are an evil man my budget is dry enough with that thermite on the way.
(http://i833.photobucket.com/albums/zz255/detronphillips/smileys/brian-dancing-banana-smiley-emoticon.gif) (http://s833.photobucket.com/user/detronphillips/media/smileys/brian-dancing-banana-smiley-emoticon.gif.html)
-
So I have a 'Sidekick' in the mail.
http://www.ebay.com.au/itm/151373519425?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
That's funny...I don't remember the Sidekick having a bit driver :cheers:
So this arrived today. In good condition over all, just needs a clean/sharpen/lube. The case is a bit roached but I'm not going to use it anyway.
The blade/file holder on this seems to rattle a lot compare to my 2013 Surge, is this normal for this model?
-
Look what I got from the mail today!!!
-
I just got my second mini-tool, with no date stamp, so i can assume a pre-1992 which is pretty much like winning the lottery. A nice little side note: When i joined this forum a few months back i had 8 leatherman tools, now im at 30 +, thanks for feeding the beast :)
-
I just got my second mini-tool, with no date stamp, so i can assume a pre-1992 which is pretty much like winning the lottery. A nice little side note: When i joined this forum a few months back i had 8 leatherman tools, now im at 30 +, thanks for feeding the beast :)
No problem, we're a happy little band of (very effective) enablers here at MTo.
....... so, what are you missing from your growing collection (ie How may we help ? ) :pok:
-
When i joined this forum a few months back i had 8 leatherman tools, now im at 30 +, thanks for feeding the beast :)
Welcome to the club :whistle:
-
I just got my second mini-tool, with no date stamp, so i can assume a pre-1992 which is pretty much like winning the lottery.
Very nice find, Mon... ;)
Mine is 0298 and while not as rare as yours, it's still in mint condition :)
Got it back in '99 as a corporate gift from Hewlett Packard, which it has stamped on one scale making it slightly rarer than stock standard, I guess.
-
Look what I got from the mail today!!!
Very nice. The Kick was my first Leatherman. After losing my beaten up original it started me on the path to collecting them.
I still have a mint one, but I never use it nowadays.
-
Look what I got from the mail today!!!
Very nice. The Kick was my first Leatherman. After losing my beaten up original it started me on the path to collecting them.
I still have a mint one, but I never use it nowadays. Look what I got from the mail today!!!
Very nice. The Kick was my first Leatherman. After losing my beaten up original it started me on the path to collecting them.
I still have a mint one, but I never use it nowadays.
bought it around 50 NZD in ebay plus shipping.
-
i´m a happy man today.
I received a long time sought after SuperTool 200.
I´v been searching for a good while and lost one on the way.
It does look sweet, pics will follow.
-
i´m a happy man today.
I received a long time sought after SuperTool 200.
I´v been searching for a good while and lost one on the way.
It does look sweet, pics will follow.
Awesome. They are great. I really like them heaps. :tu:
-
i´m a happy man today.
I received a long time sought after SuperTool 200.
I´v been searching for a good while and lost one on the way.
It does look sweet, pics will follow.
Nice :tu:. Super Tool 200s are in my top ten list of favorite Leathermans. The lock release mechanisms are a bit awkward to me but that's part of what makes them so cool. Looking forward to the pictures :salute:
-
New toy. Really liking it so far.
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/7ED5C3C8-2F1D-4A10-A5E6-5F6157764497_zpsg6opnvzu.jpg)
-
New toy. Really liking it so far.
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/7ED5C3C8-2F1D-4A10-A5E6-5F6157764497_zpsg6opnvzu.jpg)
Nice! I have a skeletool cx on the way :D
-
Got my BO Rebar today ... great tool in every way. I will change the sheath to the standart leather sheath and put the molle on my daypack - just in case ;)
(http://i1062.photobucket.com/albums/t489/kampfgockel2/IMG_4332_zpsf445d4d5.jpg) (http://s1062.photobucket.com/user/kampfgockel2/media/IMG_4332_zpsf445d4d5.jpg.html)
(http://i1062.photobucket.com/albums/t489/kampfgockel2/IMG_4334_zpse9676153.jpg) (http://s1062.photobucket.com/user/kampfgockel2/media/IMG_4334_zpse9676153.jpg.html)
-
Looks great with the BO. :tu:
-
My BORebar is one of my favorites-great MT.
-
Thanks fellows :) Much appreciated!
-
Mine is my Redemption Red Skeli from Texas Tool Crafters. Here are some pics of it with my MUT and Style CS.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/WP_20140822_18_36_34_Refocus1.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/WP_20140822_18_36_34_Refocus1.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/WP_20140822_18_39_01_Refocus1.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/WP_20140822_18_39_01_Refocus1.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/WP_20140822_18_40_14_Refocus1.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/WP_20140822_18_40_14_Refocus1.jpg.html)
-
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/WP_20140822_18_39_01_Refocus1.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/WP_20140822_18_39_01_Refocus1.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/WP_20140822_18_40_14_Refocus1.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/WP_20140822_18_40_14_Refocus1.jpg.html)
Really love what you did with your MUT, Derek... :tu: Was there a separate thread that covered the mods in more detail?
cheers.
-
Really love what you did with your MUT, Derek... :tu: Was there a separate thread that covered the mods in more detail?
cheers.
Thanks!
Here's where I made it a blunt nose. http://forum.multitool.org/index.php/topic,50578.0.html
Here's where I added the Swisscard scissors and tweezers. http://forum.multitool.org/index.php/topic,47599.0.html
-
That red is cool Derek
-
That red is cool Derek
It's awesome!! I so want to carry and use this, but I don't want to get a single mark on it. This could end up as my only shelf queen!
Sent from my iPad using Tapatalk
-
Don´t scratch it. :o
The red and the blue Skele are the only colors i tried to win - for a life as shelf queen, they are so gorgeous.
-
That red is cool Derek
It's awesome!! I so want to carry and use this, but I don't want to get a single mark on it. This could end up as my only shelf queen!
There's a simple way to make sure you don't use or get it scratched up. Send it to me, I'll do the using/scratching for you and send it back. >:D See? Problem solved! :D
-
Don´t scratch it. :o
The red and the blue Skele are the only colors i tried to win - for a life as shelf queen, they are so gorgeous.
Yeah, I'll keep it safe, and free from scratches. My precious!!
Sent from my iPad using Tapatalk
-
That red is cool Derek
It's awesome!! I so want to carry and use this, but I don't want to get a single mark on it. This could end up as my only shelf queen!
There's a simple way to make sure you don't use or get it scratched up. Send it to me, I'll do the using/scratching for you and send it back. >:D See? Problem solved! :D
You evil devil from Jersey!!! (runs and hides it in a nice safe place)
Sent from my iPad using Tapatalk
-
KF4!!!!!!!!
Sent from my SM-G900V using Tapatalk
-
KF4!!!!!!!!
Sent from my SM-G900V using Tapatalk
How do you like it?
-
Recently got the Raptor to add to my diabetic travel kit :salute:
-
KF4!!!!!!!!
Sent from my SM-G900V using Tapatalk
How do you like it?
I am loving it!!!
Sent from my SM-G900V using Tapatalk
-
KF4!!!!!!!!
Sent from my SM-G900V using Tapatalk
How do you like it?
I am loving it!!!
Sent from my SM-G900V using Tapatalk
That's great man :)
-
I haven't bought any Leathermans for a long while. I guess I'll wait for something new...
-
I haven't bought any Leathermans for a long while. I guess I'll wait for something new...
That's quite the Leap of faith the cLMf :multi:
-
I haven't bought any Leathermans for a long while. I guess I'll wait for something new...
That's quite the Leap of faith the cLMf :multi:
:D
-
I got my Redemption Red skeletool from TxToolCrafters giveaway today.
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-08-25121340_zpsbb87fded.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-08-25121340_zpsbb87fded.jpg.html)
-
Looking good. :tu:
-
Squirt ES4 is my latest! :D
-
Squirt ES4 is my latest! :D
Nice! Even though I have a few different wire strippers I wouldn't mind adding that one to the pile. :)
-
The ES4 is one of the few Leathermans I have not owned or even seen in the wild for that matter.
-
The ES4 is one of the few Leathermans I have not owned or even seen in the wild for that matter.
it is a GREAT little wire stripper. I love mine!
-
The ES4 is one of the few Leathermans I have not owned or even seen in the wild for that matter.
it is a GREAT little wire stripper. I love mine!
I'd love to get a little stripper.
-
The ES4 is one of the few Leathermans I have not owned or even seen in the wild for that matter.
it is a GREAT little wire stripper. I love mine!
I'd love to get a little stripper.
shoot me your address :facepalm:
-
The ES4 is one of the few Leathermans I have not owned or even seen in the wild for that matter.
it is a GREAT little wire stripper. I love mine!
I'd love to get a little stripper.
shoot me your address :facepalm:
I should have said "little wire stripper" :facepalm: :rofl: :rofl:
-
this one looks small
(http://www.toomeysrentall.com/wp-content/gallery/tool-pics/floor_stripper.jpg)
-
this one looks small
http://www.toomeysrentall.com/wp-content/gallery/tool-pics/floor_stripper.jpg
Palmer and stripper should never go together!!
-
this one looks small
http://www.toomeysrentall.com/wp-content/gallery/tool-pics/floor_stripper.jpg
Palmer and stripper should never go together!!
:rofl:
:b2t:
I have an orange Fuze headed my way
-
I've got a Wingman on route so I can check out the scisors. And a pocket clip for the Rebar.
-
I've got a Wingman on route so I can check out the scisors. And a pocket clip for the Rebar.
The Wingman scissors are superb, better than any other LM :2tu:
-
I've got a Wingman on route so I can check out the scisors. And a pocket clip for the Rebar.
The Wingman scissors are superb, better than any other LM :2tu:
They didn't score that well in Lynn's scissor test.
Either way its a win, I'll get a Mini Surge or the kid gets a Wingman.
-
I've got a Wingman on route so I can check out the scisors. And a pocket clip for the Rebar.
The Wingman scissors are superb, better than any other LM :2tu:
They didn't score that well in Lynn's scissor test.
Either way its a win, I'll get a Mini Surge or the kid gets a Wingman.
And failed in Cupboard's cable tie test.
-
The ES4 is one of the few Leathermans I have not owned or even seen in the wild for that matter.
it is a GREAT little wire stripper. I love mine!
I'd love to get a little stripper.
shoot me your address :facepalm:
I should have said "little wire stripper" :facepalm: :rofl: :rofl:
It's cool but it took like 6 weeks to arrive :rant: I was already over it by the time it arrived :facepalm:
-
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/MUT/DSC017771024x768.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/MUT/DSC017771024x768.jpg.html)
this amazing gift from scattergun13
-
this amazing gift from scattergun13
:ahhh AWESOME!
-
I got a PST in today, DOM is March 2003 on both handles 8)
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg1_zpsd113bd33.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg1_zpsd113bd33.jpg.html)
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg2_zps49a34981.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg2_zps49a34981.jpg.html)
-
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/MUT/DSC017771024x768.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/MUT/DSC017771024x768.jpg.html)
this amazing gift from scattergun13
NICE! :tu:
-
I got a PST in today, DOM is March 2003 on both handles 8)
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg1_zpsd113bd33.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg1_zpsd113bd33.jpg.html)
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg2_zps49a34981.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg2_zps49a34981.jpg.html)
I noticed the lack of "USA" on the plier. is that normal for 2003?
-
That is a helluva PST bdAmmo.
-
I'd love to get a little stripper.
That sounded wrong on so many levels, hahaha...Love it! ;)
-
That is a helluva PST bdAmmo.
Thanks Aloha :salute: It's in my top five as far as cool factor :D
I got a PST in today, DOM is March 2003 on both handles 8)
I noticed the lack of "USA" on the plier. is that normal for 2003?
It is fairly common for a KF4, pretty uncommon for a PST. I got lucky on ebay that nobody else noticed it.
-
That is a helluva PST bdAmmo.
Thanks Aloha :salute: It's in my top five as far as cool factor :D
I got a PST in today, DOM is March 2003 on both handles 8)
I noticed the lack of "USA" on the plier. is that normal for 2003?
It is fairly common for a KF4, pretty uncommon for a PST. I got lucky on ebay that nobody else noticed it.
Yes, great catch :salute: ( I didn't pick up on the ground-out "USA" on the plier heads either)
-
Very nice pictures of cool tools here lately.
Took me a while to get around to take some snaps of my new Supertool 200.
But here they are.
I like the technical look of it and it has a little special slot in the handle for the lanyard ring to come out that i think it shares with the Pulse.
But somehow it´s more noticeable here. I like that.
It´s is in great shape seems like it´s never used.
And my small line of supertools got somewhat completed.
-
Wow, great pics! I really like the ST200. Its been a favourite of mine for years now.
Sent from the land of the long white cloud.
-
It is fairly common for a KF4, pretty uncommon for a PST. I got lucky on ebay that nobody else noticed it.
My KF4's pliers has the USA ground out. Never seen it on a PST before, but then again, I've not really been looking either. Cool PST though man :tu:
-
Leatherman Charge Tti.
Date stamped 2/14.
Sent from my iPad using Tapatalk
-
Leatherman Charge Tti.
Date stamped 2/14.
Sent from my iPad using Tapatalk
Very nice score. :tu:
-
:D
this beauty!!!!
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/BO%20Tidal%20wave/DSC018051024x768.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/BO%20Tidal%20wave/DSC018051024x768.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/BO%20Tidal%20wave/DSC018041024x768.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/BO%20Tidal%20wave/DSC018041024x768.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/BO%20Tidal%20wave/DSC018031024x768.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/BO%20Tidal%20wave/DSC018031024x768.jpg.html)
-
:D
this beauty!!!!
I was just wondering if it had arrived yet. Very nice win. :tu:
-
:D
this beauty!!!!
I was just wondering if it had arrived yet. Very nice win. :tu:
it is a sweet tool!
-
Great looking Wave :tu:
-
Great looking Wave :tu:
thanks man. it is pretty sweet in my eyes
-
Wow that is :drool:
-
Wow that is :drool:
Thanks! it is a real nice MT, and is in my Skinth ready to go!
-
A new to me wave.
I had to get a wave to replace the one I traded away long ago now.
Sawman made me miss mine after his telling me how's his has been working out for him lately.
-
A new to me wave.
I had to get a wave to replace the one I traded away long ago now.
Sawman made me miss mine after his telling me how's his has been working out for him lately.
Attaboy Sawman, the Wave is an excellent tool. :tu: on your latest Joel.
-
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/BO%20Tidal%20wave/DSC018031024x768.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/BO%20Tidal%20wave/DSC018031024x768.jpg.html)
Love it! :tu:
What happened to the donor Rebar?
-
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/BO%20Tidal%20wave/DSC018031024x768.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/BO%20Tidal%20wave/DSC018031024x768.jpg.html)
Love it! :tu:
What happened to the donor Rebar?
I don't think he'll know. Its a donation draw prize.
Sent from the land of the long white cloud.
-
Wow that´s a beauty! :drool:
-
Rebar!!!(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20140901_172730.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20140901_172730.jpg.html)
-
Rebar!!!(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20140901_172730.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20140901_172730.jpg.html)
and the same space pen that I have :D
-
Rebar!!!(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20140901_172730.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20140901_172730.jpg.html)
Nice blade. What is it?
Sent from the land of the long white cloud.
-
That's one way to get to ALNC faster zoidberg....... ::)
-
That's one way to get to ALNC faster zoidberg....... ::)
true, and he will SAY it was an accident :rofl:
-
:whistle:
-
Shameless you two! :twak:
-
That's one way to get to ALNC faster zoidberg....... ::)
true, and he will SAY it was an accident :rofl:
:rofl: So what's your excuse then detron? :P
-
That's one way to get to ALNC faster zoidberg....... ::)
true, and he will SAY it was an accident :rofl:
:rofl: So what's your excuse then detron? :P
testing time stamps to ensure non-repudiation of forum use?
-
That's one way to get to ALNC faster zoidberg....... ::)
I've caught the enki bug!!
I can edit but not delete posts on tapatalk?
Sent from the land of the long white cloud.
Nice try. :whistle:
We believe you. ;)
-
What is everyone crying about? :whistle:
Sent from the land of the long white cloud.
-
What is everyone crying about? :whistle:
Sent from the land of the long white cloud.
The enki bug. ;)
Those are in the recycle bin. I can restore them any time. ;)
-
What is everyone crying about? :whistle:
Sent from the land of the long white cloud.
The enki bug. ;)
Those are in the recycle bin. I can restore them any time. ;)
:rofl: Is there a way to delete/remove posts with tapatalk?
Sent from the land of the long white cloud.
-
What is everyone crying about? :whistle:
Sent from the land of the long white cloud.
The enki bug. ;)
Those are in the recycle bin. I can restore them any time. ;)
:rofl: Is there a way to delete/remove posts with tapatalk?
Sent from the land of the long white cloud.
Well you did, about a dozen of them. :)
-
What is everyone crying about? :whistle:
Sent from the land of the long white cloud.
The enki bug. ;)
Those are in the recycle bin. I can restore them any time. ;)
:rofl: Is there a way to delete/remove posts with tapatalk?
Sent from the land of the long white cloud.
Well you did, about a dozen of them. :)
I used a browser to do that.
Sent from the land of the long white cloud.
-
I can't delete my posts...
-
What is everyone crying about? :whistle:
Sent from the land of the long white cloud.
The enki bug. ;)
Those are in the recycle bin. I can restore them any time. ;)
:rofl: Is there a way to delete/remove posts with tapatalk?
Sent from the land of the long white cloud.
Well you did, about a dozen of them. :)
I used a browser to do that.
Sent from the land of the long white cloud.
Nope. No TT option to delete for non moderators. It should be tap post, moderate (gives options edit or delete).
Only current option is the one you used. :-\
-
I can't delete my posts...
Yes, you can, within a short time frame. Just not in tapatalk. There should be an remove option top right corner of your post when using a browser.
-
I can't delete my posts...
Yes, you can, within a short time frame. Just not in tapatalk. There should be an remove option top right corner of your post when using a browser.
Ahh yes, it is only for a short time.
-
Rebar!!!(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20140901_172730.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20140901_172730.jpg.html)
Nice blade. What is it?
Sent from the land of the long white cloud.
Bark River Pro Scalpel II. Really digging it so far.
-
What is everyone crying about? :whistle:
Sent from the land of the long white cloud.
The enki bug. ;)
Those are in the recycle bin. I can restore them any time. ;)
:rofl: Is there a way to delete/remove posts with tapatalk?
Sent from the land of the long white cloud.
Well you did, about a dozen of them. :)
I used a browser to do that.
Sent from the land of the long white cloud.
Nope. No TT option to delete for non moderators. It should be tap post, moderate (gives options edit or delete).
Only current option is the one you used. :-\
Actually I can do that. I hadn't looked at moderate. Thanks for that. :tu:
-
Rebar!!!(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20140901_172730.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20140901_172730.jpg.html)
Nice blade. What is it?
Sent from the land of the long white cloud.
Bark River Pro Scalpel II. Really digging it so far.
Good to hear.
Never noticed that one before.
Looks so very much like my kind of knife.
Time to do some research.
Please feel free to post more pics of it.
-
These two little cuties are my newest (after a deal with Zed :salute: )
(http://i112.photobucket.com/albums/n184/sparky_415/2014/Picture020914003.jpg) (http://s112.photobucket.com/user/sparky_415/media/2014/Picture020914003.jpg.html)
-
These two little cuties are my newest (after a deal with Zed :salute: )
(http://i112.photobucket.com/albums/n184/sparky_415/2014/Picture020914003.jpg) (http://s112.photobucket.com/user/sparky_415/media/2014/Picture020914003.jpg.html)
I really like the P4 and S4 (and E4) they are great for the size IMO
-
I found an brand new Fuse knifeless that I ordered.
-
I found an brand new Fuse knifeless that I ordered.
Kewl! 8)
-
I know a certain clown that is gonna be a bit jealous. Nice castrated fuse congrats
-
I know a certain clown that is gonna be a bit jealous. Nice castrated fuse congrats
Wont he just. :P
-
I know a certain clown that is gonna be a bit jealous. Nice castrated fuse congrats
You rang.......
SoOoO....... where did you get it? How much did you pay? Do they have any more? :D
If it is from this link then disregard everything.
http://www.ebay.com.au/itm/Leatherman-Fuse-Multi-Tool-Authorised-Australian-Dealer-/181319118168?pt=AU_Hand_Tools&hash=item2a37762d58&_uhb=1
-
Thanks guys. I found it on sale at local store /webstore that still seems to have them in stock.Here http://www.friluftsland.se/multiverktyg/leatherman-fuse-knifeless
The price is equal to 49 euro or 65 usd which is much but ok around here where leathermans cost a fortune.
-
Thanks guys. I found it on sale at local store /webstore that still seems to have them in stock.Here http://www.friluftsland.se/multiverktyg/leatherman-fuse-knifeless
The price is equal to 49 euro or 65 usd which is much but ok around here where leathermans cost a fortune.
Thanks.
-
Just picked up a new Wave in the box, for $9.97 at Walmart.
it was on a locked shelf, and the price sticker SKU matched the Wave SKU, but the price was wrong.
the guy rang it up and went, HOLD UP, that is not the price I just saw, so he got the manager, and they gave it to me at the great price, I did not even have to ask.
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/20140808_155530.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/20140808_155530.jpg.html)
I never go "You have to....," or "But the price says...."
this time the clerk said "you deserve it at that price" Manager agreed. all they asked of me is if they could have the bar code off of the back of the box (physically removed) so they could show that they Sku and barcode matched. I cut it right off for them without a care in the world. :D
Great find, that's a STEAL!!!
I'd feel bad about it :cry: (for a few seconds at least).
-
I would love to have "Skeletool X leatherman" in my wardrobe next. Just now I surfed its cool features with amazing belt loop clip and it has everything that I need without having a lot of things. It has all the basic functionalities which it can solve for you. Hence I am looking forward for this leatherman (ofcourse I know they are not better than folding blades).
-
Just got a new Style PS, and a friend gave me a very beaten up Squirt P4 - the file is missing and the drivers are all chewed up. Going to see if I can do something useful with it.
-
I imported a pocket clip from the US for my Kick. Too bad I can't easily stick one on my Blast... I'd love that.
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/4135E58F-DFCE-488E-815B-03FA7BA68D75_zpstdht41vz.jpg)
And my two new Fuses turned up (the inside one is my older shape one)... but both are faulty >:(
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/F066D043-9019-4FB7-B102-795E9CE04F82_zpsatleqqsw.jpg)
-
Whats wrong with them?
-
Whats wrong with them?
http://forum.multitool.org/index.php/topic,54426.0/topicseen.html
-
I just made a awesome trade with my boss
A original pst for a like new sideclip.
I'm very happy with the trade and the sideclip. He's also very happy with the pst. He didn't use the clip and he likes the pst tool set better.
-
Pics
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg.html)
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg.html)
-
Pics
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg.html)
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg.html)
that is a good trade for both parties, and each one feels they made out better than the other
-
The mail man dropped this off to me today. I'm very impressed with it so far :D
(http://images2.snapfish.com/232323232%7Ffp83232%3Euqcshlukaxroqdfv4639%3Dot%3E3377%3D645%3D%3B25%3DXROQDF%3E2656%3B58%3C74256ot1lsi)
-
The mail man dropped this off to me today. I'm very impressed with it so far :D
(http://images2.snapfish.com/232323232%7Ffp83232%3Euqcshlukaxroqdfv4639%3Dot%3E3377%3D645%3D%3B25%3DXROQDF%3E2656%3B58%3C74256ot1lsi)
Neat
-
Nice trade Joel, and nice LEAP Steve.
-
Nice trade Joel, and nice LEAP Steve.
Thanks Kyle.
-
Nice trade Joel, and nice LEAP Steve.
(http://cdn.meme.li/instances/250x250/50920282.jpg)
I ran across this, and felt I had to do it. :rofl: :rofl: :rofl: :rofl:
no malice meant, it was just funny
-
I just found a nice Leatherman
THIS IS SOOO SWEET! (http://www.ebay.com/itm/390926144698?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
-
I just found a nice Leatherman
THIS IS SOOO SWEET! (http://www.ebay.com/itm/390926144698?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
Not bad at all. :multi:
-
Nice trade Joel, and nice LEAP Steve.
(http://cdn.meme.li/instances/250x250/50920282.jpg)
I ran across this, and felt I had to do it. :rofl: :rofl: :rofl: :rofl:
no malice meant, it was just funny
Lol :rofl: Don't worry buddy, that was hilarious. I used to love that show, but haven't watched it in several years. A friend of mine used to love giving me a hard time due to the shared name with Kyle on the show. Good times :D
-
Nice trade Joel, and nice LEAP Steve.
(http://cdn.meme.li/instances/250x250/50920282.jpg)
I ran across this, and felt I had to do it. :rofl: :rofl: :rofl: :rofl:
no malice meant, it was just funny
Lol :rofl: Don't worry buddy, that was hilarious. I used to love that show, but haven't watched it in several years. A friend of mine used to love giving me a hard time due to the shared name with Kyle on the show. Good times :D
I did not want to offend, but that was soo funny to me!
-
Nice trade Joel, and nice LEAP Steve.
(http://cdn.meme.li/instances/250x250/50920282.jpg)
I ran across this, and felt I had to do it. :rofl: :rofl: :rofl: :rofl:
no malice meant, it was just funny
Lol :rofl: Don't worry buddy, that was hilarious. I used to love that show, but haven't watched it in several years. A friend of mine used to love giving me a hard time due to the shared name with Kyle on the show. Good times :D
I did not want to offend, but that was soo funny to me!
It is funny, and it cracked me up again when I just saw it. I can just hear Cartman saying it, and it brings a smile to my face :D
-
I just found a nice Leatherman
THIS IS SOOO SWEET! (http://www.ebay.com/itm/390926144698?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
I saw that one, not a bad price for a SLV. I'm curious to see what that NIB one will sell for.
-
I just found a nice Leatherman
THIS IS SOOO SWEET! (http://www.ebay.com/itm/390926144698?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
I saw that one, not a bad price for a SLV. I'm curious to see what that NIB one will sell for.
I felt it said "no signs of wear" and the price was fair for a Charge AL (not GREAT, but fair) so I am happy with the price
-
(http://tapatalk.imageshack.com/v2/14/09/07/d718f4f4a30e0eb1a35e8392d7012360.jpg)
Just got this one a few weeks ago. Perfect size for my pocket!
Sent from my iPad using Tapatalk
-
Pics
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg.html)
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg.html)
You definitely got the best end of the deal although I do love the PST. Congrats buddy! :D
-
Wingman.
(https://farm6.staticflickr.com/5585/15152754206_a32af349ca.jpg) (https://flic.kr/p/p5ZPUS)
-
How do you like the Wingman zoidberg?
-
How do you like the Wingman zoidberg?
There are a couple things that I find annoying. That said, it is growing on me. You got one?
-
Well, my latest LM was a Rebar which I do not have anymore because it's stolen! :rant: :rant: :rant:
Damn!
Now I'm stuck between a Wave and a SOG S60. The only thing holding me back from buying the Wave is the incredible lack of an awl! I've seen awl mods but they were all too short. So, still dunno...
-
Well, my latest LM was a Rebar which I do not have anymore because it's stolen! :rant: :rant: :rant:
Damn!
Now I'm stuck between a Wave and a SOG S60. The only thing holding me back from buying the Wave is the incredible lack of an awl! I've seen awl mods but they were all too short. So, still dunno...
you can make one to fit in the bit adapter
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/20140625_213650.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/20140625_213650.jpg.html)
buy a MUT bit kit (like $8) and grind away, and you will still have a long phillips/flat to use as well
-
Well, my latest LM was a Rebar which I do not have anymore because it's stolen! :rant: :rant: :rant:
Damn!
Now I'm stuck between a Wave and a SOG S60. The only thing holding me back from buying the Wave is the incredible lack of an awl! I've seen awl mods but they were all too short. So, still dunno...
you can make one to fit in the bit adapter
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/20140625_213650.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/20140625_213650.jpg.html)
buy a MUT bit kit (like $8) and grind away, and you will still have a long phillips/flat to use as well
That's a sweet looking awl you made there :D
-
How do you like the Wingman zoidberg?
There are a couple things that I find annoying. That said, it is growing on me. You got one?
What do you find annoying? I had both Wingman and Sidekick, and swapped the saw and scissors. Don't carry them much though.
-
How do you like the Wingman zoidberg?
There are a couple things that I find annoying. That said, it is growing on me. You got one?
What do you find annoying? I had both Wingman and Sidekick, and swapped the saw and scissors. Don't carry them much though.
Pocket clip and the handles.
I can get over it being right side carry but what is with tip down.
The handle shape and spring action pliers work together and attempt to escape out the back of my hand.
-
How do you like the Wingman zoidberg?
There are a couple things that I find annoying. That said, it is growing on me. You got one?
What do you find annoying? I had both Wingman and Sidekick, and swapped the saw and scissors. Don't carry them much though.
Pocket clip and the handles.
I can get over it being right side carry but what is with tip down.
The handle shape and spring action pliers work together and attempt to escape out the back of my hand.
you hit the nail on the head. it is so frustrating ::)
-
How do you like the Wingman zoidberg?
There are a couple things that I find annoying. That said, it is growing on me. You got one?
What do you find annoying? I had both Wingman and Sidekick, and swapped the saw and scissors. Don't carry them much though.
Pocket clip and the handles.
I can get over it being right side carry but what is with tip down.
The handle shape and spring action pliers work together and attempt to escape out the back of my hand.
you hit the nail on the head. it is so frustrating ::)
I'll give it a little longer before putting it on the hacking block. :angel:
-
The mail man dropped this off to me today. I'm very impressed with it so far :D
(http://images2.snapfish.com/232323232%7Ffp83232%3Euqcshlukaxroqdfv4639%3Dot%3E3377%3D645%3D%3B25%3DXROQDF%3E2656%3B58%3C74256ot1lsi)
Looking great !
How would you say the quality or the overall feeling of the tool is?
Is it like a Wingman or more towards a let´s say a Rebar ?
-
The mail man dropped this off to me today. I'm very impressed with it so far :D
(http://images2.snapfish.com/232323232%7Ffp83232%3Euqcshlukaxroqdfv4639%3Dot%3E3377%3D645%3D%3B25%3DXROQDF%3E2656%3B58%3C74256ot1lsi)
Looking great !
How would you say the quality or the overall feeling of the tool is?
Is it like a Wingman or more towards a let´s say a Rebar ?
The quality is top notch and the overall feel is solid. I wouldn't compare this to a Wingman or Rebar but the glass reinforced handle material seems pretty tough.
-
Well, my latest LM was a Rebar which I do not have anymore because it's stolen! :rant: :rant: :rant:
Damn!
Now I'm stuck between a Wave and a SOG S60. The only thing holding me back from buying the Wave is the incredible lack of an awl! I've seen awl mods but they were all too short. So, still dunno...
you can make one to fit in the bit adapter
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/20140625_213650.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/20140625_213650.jpg.html)
buy a MUT bit kit (like $8) and grind away, and you will still have a long phillips/flat to use as well
Whoa, this one's pretty cool! Thanks a bunch for the tip!
-
Well, my latest LM was a Rebar which I do not have anymore because it's stolen! :rant: :rant: :rant:
Damn!
Now I'm stuck between a Wave and a SOG S60. The only thing holding me back from buying the Wave is the incredible lack of an awl! I've seen awl mods but they were all too short. So, still dunno...
you can make one to fit in the bit adapter
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/20140625_213650.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/20140625_213650.jpg.html)
buy a MUT bit kit (like $8) and grind away, and you will still have a long phillips/flat to use as well
Whoa, this one's pretty cool! Thanks a bunch for the tip!
How long do you need? First ones a cut down mod, second is from a Rebar.
(https://farm6.staticflickr.com/5442/8956850444_abfb83cd46.jpg) (https://flic.kr/p/eDuczW)
(https://farm4.staticflickr.com/3672/12374581133_a658e557d0.jpg) (https://flic.kr/p/jRuXR8)
-
My brother got these for me recently! First Juices in my my collection!
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/imagejpg1_zps6100e030.jpg)
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/imagejpg2_zps82c094fc.jpg)
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/imagejpg3_zps4b3843c8.jpg)
CB
-
Well, my latest LM was a Rebar which I do not have anymore because it's stolen! :rant: :rant: :rant:
Damn!
Now I'm stuck between a Wave and a SOG S60. The only thing holding me back from buying the Wave is the incredible lack of an awl! I've seen awl mods but they were all too short. So, still dunno...
you can make one to fit in the bit adapter
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/20140625_213650.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/20140625_213650.jpg.html)
buy a MUT bit kit (like $8) and grind away, and you will still have a long phillips/flat to use as well
Whoa, this one's pretty cool! Thanks a bunch for the tip!
How long do you need? First ones a cut down mod, second is from a Rebar.
(https://farm6.staticflickr.com/5442/8956850444_abfb83cd46.jpg) (https://flic.kr/p/eDuczW)
(https://farm4.staticflickr.com/3672/12374581133_a658e557d0.jpg) (https://flic.kr/p/jRuXR8)
The one I had on the Rebar was long enough. So, the Rebar awl can be fitted onto a Charge? Hmmm, maybe I can do the same with the Wave, as well...
-
Well, my latest LM was a Rebar which I do not have anymore because it's stolen! :rant: :rant: :rant:
Damn!
Now I'm stuck between a Wave and a SOG S60. The only thing holding me back from buying the Wave is the incredible lack of an awl! I've seen awl mods but they were all too short. So, still dunno...
you can make one to fit in the bit adapter
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/20140625_213650.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/20140625_213650.jpg.html)
buy a MUT bit kit (like $8) and grind away, and you will still have a long phillips/flat to use as well
Whoa, this one's pretty cool! Thanks a bunch for the tip!
How long do you need? First ones a cut down mod, second is from a Rebar.
(https://farm6.staticflickr.com/5442/8956850444_abfb83cd46.jpg) (https://flic.kr/p/eDuczW)
(https://farm4.staticflickr.com/3672/12374581133_a658e557d0.jpg) (https://flic.kr/p/jRuXR8)
The one I had on the Rebar was long enough. So, the Rebar awl can be fitted onto a Charge? Hmmm, maybe I can do the same with the Wave, as well...
Yes, it fits the Charge and Wave. :tu:
-
The Steens sneezed & this little booger popped out :P :D
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/3cbc4f0c-4ea6-4202-9011-7ed5ea5f7883_zps7eeaeb28.jpg)
I have been keen to have a look at one of the retired Leatherman hunting knives & the Steens came up on a Aussie knife forum for a ok price & I jumped at it.
The rest all together ;
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/SAM_2383_zps100a02e3.jpg)
Steens , Style , PSII & a Flair that was meant to be 'excellent' condition but it's small screwdriver was broken & the corkscrew's back spring is also broken >:(
-
My BO Fuse came in. My first BO and first Zytel, I'm happy with it so far.
Also, first MT I've ordered directly from LM. I really like the packaging/presentation.
(http://tapatalk.imageshack.com/v2/14/09/09/0287ea1b83a9a98de6abeac56addc491.jpg)
(http://tapatalk.imageshack.com/v2/14/09/09/721279a1d8f70f5f42432d301f4e9005.jpg)
-
My BO Fuse came in. My first BO and first Zytel, I'm happy with it so far.
Also, first MT I've ordered directly from LM. I really like the packaging/presentation.
(http://tapatalk.imageshack.com/v2/14/09/09/0287ea1b83a9a98de6abeac56addc491.jpg)
(http://tapatalk.imageshack.com/v2/14/09/09/721279a1d8f70f5f42432d301f4e9005.jpg)
the packaging is not as great when you order 2 at once, the boxes will be loose in a bigger box :facepalm:
-
Congrats on the Fuse. I like the packaging as well, but sadly that was the first time I had ever got a MT packaged like that from Leatherman.
-
The mail man dropped this off to me today. I'm very impressed with it so far :D
(http://images2.snapfish.com/232323232%7Ffp83232%3Euqcshlukaxroqdfv4639%3Dot%3E3377%3D645%3D%3B25%3DXROQDF%3E2656%3B58%3C74256ot1lsi)
Looking great !
How would you say the quality or the overall feeling of the tool is?
Is it like a Wingman or more towards a let´s say a Rebar ?
The quality is top notch and the overall feel is solid. I wouldn't compare this to a Wingman or Rebar but the glass reinforced handle material seems pretty tough.
Cool they are finally out, my kid wants one to put in his school backpack " no blade of course ". How is it ? Would you recommend it ?
Sak's rule !
-
Congrats on the Fuse. I like the packaging as well, but sadly that was the first time I had ever got a MT packaged like that from Leatherman.
Thanks, maybe it's a new push to change their packaging. Maybe they're working on the multi-MT boxes as well, wouldn't want to leave out the people that spend MORE money ;)
-
The mail man dropped this off to me today. I'm very impressed with it so far :D
(http://images2.snapfish.com/232323232%7Ffp83232%3Euqcshlukaxroqdfv4639%3Dot%3E3377%3D645%3D%3B25%3DXROQDF%3E2656%3B58%3C74256ot1lsi)
Looking great !
How would you say the quality or the overall feeling of the tool is?
Is it like a Wingman or more towards a let´s say a Rebar ?
The quality is top notch and the overall feel is solid. I wouldn't compare this to a Wingman or Rebar but the glass reinforced handle material seems pretty tough.
Cool they are finally out, my kid wants one to put in his school backpack " no blade of course ". How is it ? Would you recommend it ?
Sak's rule !
It does have a saw. With today's smurfed up schools thinking everything under the sun is a weapon it could possibly be a problem. Just a heads up.
Its really a shame. I remember carrying a pocket knife to school every day as well as most other kids and no one ever got stabbed or it used against them. Times have changed.
-
Ya, don't send your kid to school with it. They could cut someone's throat with the saw. ::)
-
Ya, don't send your kid to school with it. They could cut someone's throat with the saw. ::)
Slowly .
:rofl:
Hold still :rofl:
-
Ya, don't send your kid to school with it. They could cut someone's throat with the saw. ::)
Slowly .
:rofl:
Hold still :rofl:
I'm :rofl: at you :rofl:.
-
Ya, don't send your kid to school with it. They could cut someone's throat with the saw. ::)
Slowly .
:rofl:
Hold still :rofl:
I'm :rofl: at you :rofl:.
Too funny !!!!
Sak's rule !
-
Look what I found on my mailbox. Marked 0610 on both handles.
Sent from my iPad using Tapatalk
-
the top one and the bottom one just joined the middle.
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/fuses_zps62d519ae.jpg)
The new ones have no idea what's in store for them...
-
Charge SLV
Date Code 0607 / 0607
I LOVE the looks of the Sheath that came with this thing
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01842resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01842resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01841resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01841resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01843resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01843resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01844resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01844resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01846resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01846resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01847resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01847resized.jpg.html)
the file is VERY aggressive, much more so than my newer AL and TTi
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01848resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01848resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01849resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01849resized.jpg.html)
-
the top one and the bottom one just joined the middle.
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/fuses_zps62d519ae.jpg)
The new ones have no idea what's in store for them...
:drool: :popcorn:
-
Nice Charge Detron!
-
Charge SLV
Date Code 0607 / 0607
I LOVE the looks of the Sheath that came with this thing
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01842resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01842resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01841resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01841resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01843resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01843resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01844resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01844resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01846resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01846resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01847resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01847resized.jpg.html)
the file is VERY aggressive, much more so than my newer AL and TTi
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01848resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01848resized.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Charge%20SLV/DSC01849resized.jpg) (http://s833.photobucket.com/user/detronphillips/media/multitools/Charge%20SLV/DSC01849resized.jpg.html)
That one looks sweet, totally forgot there exists a grey charge. :o
-
Original LM Super Tool from '98.
The ST300 is great but there's something special about this one :multi:
-
:D
-
:D
Special piece! :cheers:
-
Original LM Super Tool from '98.
The ST300 is great but there's something special about this one :multi:
I agree. I was surprised by how much I like my original Supertool ('97). I just got it earlier this year, looking like it had never been used. They're a tough, solid multitool :tu:
-
My latest is a LM OHT...ok, well it's not technically mine, but I have it on loan for a little while to test out. Thanks to the generosity of one of the many enablers here of course ;) Initial impressions are that I enjoy it. It's rather bulky compared to my other MTs, but it's actually lighter than I expected. I'll weigh it tomorrow at work, but it seems to be around the same weight as my ReCharge TTi, so that's doable for me. I'll have to see how it carries in my back pocket with all my work pants. I don't think it will carry in my jeans though, as those have smaller back pockets.
It's very smooth with the flicky plier action, and I love that it's got the sprung pliers. I'm surprised by just how short the blades are, but they're sufficient for my typical use. I think I'm going to want one, but I'll see how it goes over the next several days.
-
Well I got a new toy today.
(http://i1222.photobucket.com/albums/dd490/RimfireNZ/Mobile%20Uploads/F052A401-2E29-4042-B950-81D56FD0C2F1_zpsepsfhchj.jpg)
I'm still undecided on whether to keep it or not. On one hand, if I ever work for some beigeist, easily offended hippies that can't tell the difference between a broad sword and a butter knife it'd be ideal... but that's not likely to happen.
So I'll think about it for a week or so, but I might be able to offer it to one of our UK members because of the sorry state of their knife laws. We'll see :) I'll open another thread if that's the case.
-
Just picked up a silver Leatherman Wave (new) with sheath on eBay for $56 and grabbed a pocket clip for it off of amazon. I think I found my new heavy duty MT! It will live in my pocket during projects and the weekend while residing in my truck the rest of the time! I'm real excited to put it to good use!
-
squirt s4 with ford logo. tools almost unused.
(http://i.imgur.com/9IfFOGf.png)
-
My latest Leatherman is the BO Surge. I already have a quite old stainless Surge, but I couldn't pass up the chance to get a brand new one with the replaceable wire cutters, newly designed saw/file holder and a black Mollie sheath. The price... Drum roll please... $60
-AdmSlc
-
DAMN!!! 60 bucks! Nice score!
Nate
-
The price... Drum roll please... $60
For a new Surge that's a daylight robbery. Who/where was giving it away, if not a secret?
-
The store is NPS. It's a place where they sell stuff damaged/lost in shipping.
-AdmSlc
-
Squirt ES4
-
Squirt ES4
Good choice! :tu: This is one of my favorites.
-
Just arrived from NY today, thanks Sticktodrum (insert happy dance here)
(http://www.linuxhippy.co.uk/images/MTO/smashiepst1.jpg)
(http://www.linuxhippy.co.uk/images/MTO/smashiepst2.jpg)
(http://www.linuxhippy.co.uk/images/MTO/smashiepst3.jpg)
(http://www.linuxhippy.co.uk/images/MTO/smashiepst4.jpg)
(http://www.linuxhippy.co.uk/images/MTO/smashiepst5.jpg)
-
Nice PST/PST II :tu:.
-
Just arrived from NY today, thanks Sticktodrum (insert happy dance here)
Not bad for hundred bucks altogether...two classics in close to perfect condition :tu:
-
Gahhh! Why did I come over here?!
Nice looking PSTs.
Nate
-
I've just acquired a brand new "sideclip" for nothing!
It was a bargain that just keeps giving, a great bit of luck. I was browsing a motorcycle forum I hardly ever look at and up popped a pair of nearly new motorcycle cases for silly money, £60. Bit the guys hand off after asking a few questions to make sure they were kosher, I knew him vaguely anyway. He even delivered them personally to my place!
They looked new, like they cost the guy £350 yesterday new. Opened them up and inside were the inner bags which are £40/50 each! BONUS! Ive been after some for my existing cases and these fit nicely so I've got free bags! Sold the cases for £180, ½rrp so passed a bargain on to another lucky guy.
This was a few months ago, I first came to use the bags last week and looked in the side pockets for the shoulder straps and found a new condition LM sideclip!
Got hold of the original seller and he's not interested! More money than brains or as I like to think, very generous. Owe him a beer.
I've used a mk1 Wave for years but its always put in luggage or the bike toolroll, I'm more likely to have the sideclip on me when I need it as its a legal carry here, the wave isnt
-
I've just acquired a brand new "sideclip" for nothing!
It was a bargain that just keeps giving, a great bit of luck. I was browsing a motorcycle forum I hardly ever look at and up popped a pair of nearly new motorcycle cases for silly money, £60. Bit the guys hand off after asking a few questions to make sure they were kosher, I knew him vaguely anyway. He even delivered them personally to my place!
They looked new, like they cost the guy £350 yesterday new. Opened them up and inside were the inner bags which are £40/50 each! BONUS! Ive been after some for my existing cases and these fit nicely so I've got free bags! Sold the cases for £180, ½rrp so passed a bargain on to another lucky guy.
This was a few months ago, I first came to use the bags last week and looked in the side pockets for the shoulder straps and found a new condition LM sideclip!
Got hold of the original seller and he's not interested! More money than brains or as I like to think, very generous. Owe him a beer.
I've used a mk1 Wave for years but its always put in luggage or the bike toolroll, I'm more likely to have the sideclip on me when I need it as its a legal carry here, the wave isnt
Good deal! :D :tu:
-
Welcome, Dave. :waving:
-
I just got my new RO Rebar today :mail: , ill get some pics up soon! :D
-
SS Rebar,thanks to sticktodrum :tu:
See if I get along with this one any better
-
Since getting my SS ST 300 a few months back I have been really wanting the BO version. Well I did it.................... Here she is in all her glory along with my SS one.
-
It does look great in BO. :tu:
-
Since getting my SS ST 300 a few months back I have been really wanting the BO version. Well I did it.................... Here she is in all her glory along with my SS one.
Oh yes, BO all the way...congrats! :cheers:
-
Thanks guys and yes it looks awesome in black. I have become very fond of the ST 300.
-
My first and only Leatherman thanks to Joel. I don't actually have it yet, this the picture of what he is sending me.
(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/Wave.jpg~original)
Maybe now he can buy his fat bike. I am still not sure what that is.
Still wish I could have talked him into selling me the Rebar or ST 300 :drool:
-
I just posted this as a separate thread but it really belongs here. I scored a Knifeless Fuse by mere chance so needless to say I snatched it up.
I also got a SS Wave which I also couldn't pass on.
-
Since getting my SS ST 300 a few months back I have been really wanting the BO version. Well I did it.................... Here she is in all her glory along with my SS one.
It really look nice in black. I totally understand you.
I did the same some months ago had my ss for some years then got the bo this summer. A little unnecessary in a way but then very satisfying in another way. :D
-
A little necessary but then very satisfying. :D
Fixed this for you. Don't mention it. :pok:
-
(http://tapatalk.imageshack.com/v2/14/10/23/1762246872080fdaa68d57adcb966106.jpg)
My latest picked it up at a garage sale for $2. I'm used to my c33, but I like this too.
-
(http://s21.postimg.org/xxow540gn/PA305938_Kopiowanie.jpg) (http://postimage.org/)
LM #7
-
I wish this was my latest leatherman but I am not going to bid on it (http://www.ebay.com/itm/Leatherman-Charge-Al-Multi-Tool-Orange-Handles-/390961123644?pt=LH_DefaultDomain_0&hash=item5b0719513c)
looks nice though
-
I wish this was my latest leatherman but I am not going to bid on it (http://www.ebay.com/itm/Leatherman-Charge-Al-Multi-Tool-Orange-Handles-/390961123644?pt=LH_DefaultDomain_0&hash=item5b0719513c)
looks nice though
Hello! :drool:
-
I wish this was my latest leatherman but I am not going to bid on it (http://www.ebay.com/itm/Leatherman-Charge-Al-Multi-Tool-Orange-Handles-/390961123644?pt=LH_DefaultDomain_0&hash=item5b0719513c)
looks nice though
You'd have to pass all the keen Dutch MT collectors, first :D
-
This has to be the record for the fastest mail I have ever received over here. Just over two weeks.
My first and only Leatherman. A SS Wave purchased second hand off Joel.
Very impressed with the OH opening knife and I have to admit coming into this I did not think I would like it. Are they all this smooth and easy to open or has it been broke in a little you think? Came to me very sharp (thanks Joel) which is good cause every time I am about to buy a Edge Pro Apex another SAK or MT come along that I just have to buy.
Excellent condition. Like new for all intents and purposes.
Initial thoughts.
I am a huge Spyderco fanboi so don't tell my friends on the Spydie forum but my first thought after playing with the OHO blade for a while was "I could get away with just carrying this one tool"
Eye glass mini drive or whatever it is called. Worthless. For me anyhow. Mod time I suppose. Any good idea of what to switch it out with?
Scissors are win and the large flat head screwdriver would make a nifty mini pry bar I think.
Now for the thing that has me the most excited. Well maybe tied with the knife. The nylon case. Specifically the little stretch bit on the side that seemingly were made for my little AAA flashlight. All I need to do now is find a fire sourse of some sort that will fit in the other stretchy thing and I am all set in one pouch! Light, Fire. Blade and Multi Tool.
Anyhow thanks again Joel for the hook up and before you guys get all up in my business pictures will be up tomorrow when BOB comes back out. Here is one for now so you can see how I feel sporting this beast.
:multi:
-
This has to be the record for the fastest mail I have ever received over here. Just over two weeks.
My first and only Leatherman. A SS Wave purchased second hand off Joel.
Very impressed with the OH opening knife and I have to admit coming into this I did not think I would like it. Are they all this smooth and easy to open or has it been broke in a little you think? Came to me very sharp (thanks Joel) which is good cause every time I am about to buy a Edge Pro Apex another SAK or MT come along that I just have to buy.
Excellent condition. Like new for all intents and purposes.
Initial thoughts.
I am a huge Spyderco fanboi so don't tell my friends on the Spydie forum but my first thought after playing with the OHO blade for a while was "I could get away with just carrying this one tool"
Eye glass mini drive or whatever it is called. Worthless. For me anyhow. Mod time I suppose. Any good idea of what to switch it out with?
Scissors are win and the large flat head screwdriver would make a nifty mini pry bar I think.
Now for the thing that has me the most excited. Well maybe tied with the knife. The nylon case. Specifically the little stretch bit on the side that seemingly were made for my little AAA flashlight. All I need to do now is find a fire sourse of some sort that will fit in the other stretchy thing and I am all set in one pouch! Light, Fire. Blade and Multi Tool.
Anyhow thanks again Joel for the hook up and before you guys get all up in my business pictures will be up tomorrow when BOB comes back out. Here is one for now so you can see how I feel sporting this beast.
:multi:
You could swap out the small bit driver for an awl.
-
Congrats on the Wave!
Nate
-
Congrats on the Wave!
Nate
Thanks. Very happy with it.
Yeah Awl was the first thing that pooped into my mind. Prolly about the same size as far as handle space goes and more bueno as far as usefulness goes.
The Saw on this thing looks like it can cut real well. Yes?
-
Congrats on the Wave!
Nate
Thanks. Very happy with it.
Yeah Awl was the first thing that pooped into my mind. Prolly about the same size as far as handle space goes and more bueno as far as usefulness goes.
The Saw on this thing looks like it can cut real well. Yes?
Yeah the saw works good. :tu:
-
Once you replace the small bit driver, carry the bit in the sheath, if needed it can be used as shown here (http://forum.multitool.org/index.php/topic,48706.msg841761.html#msg841761).
-
Just noticed something else.
I was playing, I mean inspecting my new toy, I mean tool and was like how do I tell which knife I am about to open? Not a fan of serrated blades. Wen I noticed a little bumpy bit at the top of the outside of the serrated blade and smooth on the plain edge.
Well done Leatherman, simple and effective. :tu:
Do wish the blade was some nice S90V or even S30V. Guess you can't have it all and I am sure whatever this one is made of is ok.
-
The Charges have thr S30v blade on them.
Nate
-
Just noticed something else.
I was playing, I mean inspecting my new toy, I mean tool and was like how do I tell which knife I am about to open? Not a fan of serrated blades. Wen I noticed a little bumpy bit at the top of the outside of the serrated blade and smooth on the plain edge.
Well done Leatherman, simple and effective. :tu:
Do wish the blade was some nice S90V or even S30V. Guess you can't have it all and I am sure whatever this one is made of is ok.
PM Breezy12, he may have a spare S30V blade for sale.
-
texastoolcrafters on ebay sometimes offer S30V blades to suit LM Charges/Waves(new) . I think they are left over from when they are modding Charges with damascus blades.
http://www.ebay.com/itm/390961885644
-
Just noticed something else.
I was playing, I mean inspecting my new toy, I mean tool and was like how do I tell which knife I am about to open? Not a fan of serrated blades. Wen I noticed a little bumpy bit at the top of the outside of the serrated blade and smooth on the plain edge.
Well done Leatherman, simple and effective. :tu:
Do wish the blade was some nice S90V or even S30V. Guess you can't have it all and I am sure whatever this one is made of is ok.
PM Breezy12, he may have a spare S30V blade for sale.
Will do. How does one have a spare S30V blade? Someone make them or he didn't need it on his Charge?
-
texastoolcrafters on ebay sometimes offer S30V blades to suit LM Charges/Waves(new) . I think they are left over from when they are modding Charges with damascus blades.
http://www.ebay.com/itm/390961885644
Nice. S30V for only 24 bones.
I just had an idea. Could I replace both my normal plain edge blade AND the serrated on with S30V plain edge blades?
-
Left over from a mod is my guess.
Nate
-
Just noticed something else.
I was playing, I mean inspecting my new toy, I mean tool and was like how do I tell which knife I am about to open? Not a fan of serrated blades. Wen I noticed a little bumpy bit at the top of the outside of the serrated blade and smooth on the plain edge.
Well done Leatherman, simple and effective. :tu:
Do wish the blade was some nice S90V or even S30V. Guess you can't have it all and I am sure whatever this one is made of is ok.
PM Breezy12, he may have a spare S30V blade for sale.
Will do. How does one have a spare S30V blade? Someone make them or he didn't need it on his Charge?
He picked up a bulk ebay lot with reconditioned blades. A few of us bought some off him though so I'm not sure if any are left. There are also 154CM blades, they are really good too, I might even have one around here somewhere.
-
texastoolcrafters on ebay sometimes offer S30V blades to suit LM Charges/Waves(new) . I think they are left over from when they are modding Charges with damascus blades.
http://www.ebay.com/itm/390961885644
Nice. S30V for only 24 bones.
I just had an idea. Could I replace both my normal plain edge blade AND the serrated on with S30V plain edge blades?
Yes you can.
-
The blade that comes stock on a Wave is the 154CM?
If so I think I will just replace the mini driver and the serrated blade with an Awl and S30V blade.
What in the world kinda bit do I need to remove these strange little connector screw things?
Also thanks for all the info.
-
The blade that comes stock on a Wave is the 154CM?
If so I think I will just replace the mini driver and the serrated blade with an Awl and S30V blade.
What in the world kinda bit do I need to remove these strange little connector screw things?
Also thanks for all the info.
Nar, all SE blades are 420HC. Wave PE is 420HC, Charge Ti PE is 154CM and the Charge TTi PE is S30V.
The small bit cleans out a chainsaw bar groove really well.
And you're welcome.
-
Buy a Rebar, gets you an awl and plier head with 154CM replaceable wire cutters.
Rebuild the Rebar with the Wave parts and keep it for backup or give it to a mate or whatever.
Just an idea.
-
Buy a Rebar, gets you an awl and plier head with 154CM replaceable wire cutters.
Rebuild the Rebar with the Wave parts and keep it for backup or give it to a mate or whatever.
Just an idea.
Already have a Rebar on the way, but it is a BO model that will not be modded for reasons that will become obvious soon enough.
Would love to score a SS Rebar for just what you suggested though. Ton of young Soldiers here I could donate the Rebar to after I score the bits I need.
The Wave has no cap lifter? Or is the can opener multi function like some of the SAKs?
-
It is a cap lifter and can opener.
Nate
-
Buy a Rebar, gets you an awl and plier head with 154CM replaceable wire cutters.
Rebuild the Rebar with the Wave parts and keep it for backup or give it to a mate or whatever.
Just an idea.
Already have a Rebar on the way, but it is a BO model that will not be modded for reasons that will become obvious soon enough.
Would love to score a SS Rebar for just what you suggested though. Ton of young Soldiers here I could donate the Rebar to after I score the bits I need.
The Wave has no cap lifter? Or is the can opener multi function like some of the SAKs?
Its a multi function opener. There is also a lanyard ring tucked away on one of the handles.
Bah, beaten by the 7K.
-
Joel included a nice piece of 550 cord tied up as a fob but I can find no lanyard ring? :think:
I thought the lanyard ring and pocket clip were things you could buy extra?
-
Yes, but as Z said, the one is tucked in the handle. It is where the saw or file is.
Nate
-
Joel included a nice piece of 550 cord tied up as a fob but I can find no lanyard ring? :think:
I thought the lanyard ring and pocket clip were things you could buy extra?
You can buy them as extras but there is one already on it. Look under the saw and file. Use the small bit (thats one use for it) to push it out.
Bah, beaten again.
-
LOL!
Nate
-
Huh who would have guessed. Right there all along. :facepalm:
Love how the closed Wave is like a inch or so shorter then my Gerber MP600. Can't really feel the weight different though. Seem about the same.
-
Nar, all SE blades are 420HC. Wave PE is 420HC, Charge Ti PE is 154CM and the Charge TTi PE is S30V.
Harley, you should listen to this guy...he sure knows his LM stuff... :multi:
-
Nar, all SE blades are 420HC. Wave PE is 420HC, Charge Ti PE is 154CM and the Charge TTi PE is S30V.
Harley, you should listen to this guy...he sure knows his LM stuff... :multi:
don't forget that the Charge AL/ALX PE blades are also 154CM... :pok:
:D
-
Nar, all SE blades are 420HC. Wave PE is 420HC, Charge Ti PE is 154CM and the Charge TTi PE is S30V.
Harley, you should listen to this guy...he sure knows his LM stuff... :multi:
don't forget that the Charge AL/ALX PE blades are also 154CM... :pok:
:D
Around these parts we blame kirky and don't listen to zoidberg. I listen to the Breeze. :)
-
Got this big boy, courtesy of CJ Goodwin, an ex-Leatherman employee.
(https://farm6.staticflickr.com/5597/15059561304_0007d2e9bf_o_d.jpg)
(https://farm9.staticflickr.com/8545/15494112068_54cb760bd1_o_d.jpg)
-
With USA stamp. :ahhh :drool: :ahhh :drool: :ahhh :gimme:
-
Nice Super Tool babola :tu:
-
Last In and First Out >:D
(http://i1375.photobucket.com/albums/ag474/travex/forums/surge-1_zpse3cef472.png)
-
Nar, all SE blades are 420HC. Wave PE is 420HC, Charge Ti PE is 154CM and the Charge TTi PE is S30V.
Harley, you should listen to this guy...he sure knows his LM stuff... :multi:
don't forget that the Charge AL/ALX PE blades are also 154CM... :pok:
:D
Around these parts we blame kirky and don't listen to zoidberg. I listen to the Breeze. :)
:rofl:
thanks zoidberg... I think. ;)
:cheers:
-
Last In and First Out >:D
(http://i1375.photobucket.com/albums/ag474/travex/forums/surge-1_zpse3cef472.png)
Sory to hear...what made you do it? ???
-
Honestly, I was quite disappointed (it was old Surge):
1) sharp edges
2) bosh T-shank blades didn't fit precisely (it have noticable play). Usage of T-shankThis was main reason why I wanted Surge.
3) replacable small bit driver what is not unusable for my needs
I compared Surge to my ST300 and decided.
-
My wave that I got at a gun show
-
My wave that I got at a gun show
Nice. I too am loving my new Wave.
Welcome to the forum.
For some reason I can't see the picture of your new Wave? :pok:
-
Double post because I don't want to be a hypocrite.
My latest and only Leatherman. Well not counting the BO Rebar I got coming in the mail.
(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/flift.jpg~original)
-
My latest and only Leatherman. Well not counting the BO Rebar I got coming in the mail.
(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/flift.jpg~original)
Is this the new LM tool with tan scales? :think:
-
Nah that is just how I carry it. :whistle:
This is my Wave.
(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Knives/wavetest.jpg~original)
-
I just picked up a camo leatherman blast but dont know how to post pictures on here!! By the way hello to everyone Im a newbie.
-
Welcome aboard! :waving: Here's a thread on posting pictures. :tu:
http://forum.multitool.org/index.php/topic,2306.0.html
-
Welcome to the forum. :salute:
-
My New Surge arrived today! My Bit Kit is still on the way.. :ahhh
Here it is along side my Wave Mod:
(http://i1377.photobucket.com/albums/ah42/DazMechanical/Mobile%20Uploads/862EA0DF-3EAB-4785-B05C-8DBAF0CBB48B_zpscfgjnrom.jpg) (http://s1377.photobucket.com/user/DazMechanical/media/Mobile%20Uploads/862EA0DF-3EAB-4785-B05C-8DBAF0CBB48B_zpscfgjnrom.jpg.html)
-
Nice one brother. :tu:
-
My New Surge arrived today! My Bit Kit is still on the way.. :ahhh
Here it is along side my Wave Mod:
(http://i1377.photobucket.com/albums/ah42/DazMechanical/Mobile%20Uploads/862EA0DF-3EAB-4785-B05C-8DBAF0CBB48B_zpscfgjnrom.jpg) (http://s1377.photobucket.com/user/DazMechanical/media/Mobile%20Uploads/862EA0DF-3EAB-4785-B05C-8DBAF0CBB48B_zpscfgjnrom.jpg.html)
Another shiny Surge arrives Downunder! :tu:
-
Gotta bo Rebar my first mt in a long time.
-
My New Surge arrived today! My Bit Kit is still on the way.. :ahhh
Here it is along side my Wave Mod:
(http://i1377.photobucket.com/albums/ah42/DazMechanical/Mobile%20Uploads/862EA0DF-3EAB-4785-B05C-8DBAF0CBB48B_zpscfgjnrom.jpg) (http://s1377.photobucket.com/user/DazMechanical/media/Mobile%20Uploads/862EA0DF-3EAB-4785-B05C-8DBAF0CBB48B_zpscfgjnrom.jpg.html)
Dang that Surge is a beast. :drool:
Really need to push it up higher on my gimme list.
-
Dang that Surge is a beast. :drool:
That´s why i´m calling mine usually "the Beast", and not "the Surge". :D
Really need to push it up higher on my gimme list.
You see, i wasn´t kidding on you. :salute:
-
You see, i wasn´t kidding on you. :salute:
Ja, ich weiB brescheid. Danke. :tu:
-
The Steens sneezed & this little booger popped out :P :D
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/3cbc4f0c-4ea6-4202-9011-7ed5ea5f7883_zps7eeaeb28.jpg)
I have been keen to have a look at one of the retired Leatherman hunting knives & the Steens came up on a Aussie knife forum for a ok price & I jumped at it.
The rest all together ;
(http://i291.photobucket.com/albums/ll287/multimat426/Leatherman/SAM_2383_zps100a02e3.jpg)
Steens , Style , PSII & a Flair that was meant to be 'excellent' condition but it's small screwdriver was broken & the corkscrew's back spring is also broken >:(
I recently got a Leatherman knife Crater C33LX and it look a pretty good piece.
-
I finally got a OG Wave. They are not hard to find or anything it just always got pushed to the back burner for years, but I traded for one and I quite like it. I like how it is smaller than the new Wave. Nothing against the new Waves size as I like that in its own right, but the smaller size is nice.
-
I finally got a OG Wave. They are not hard to find or anything it just always got pushed to the back burner for years, but I traded for one and I quite like it. I like how it is smaller than the new Wave. Nothing against the new Waves size as I like that in its own right, but the smaller size is nice.
Congrats on getting an OG Wave Cap :tu: I like mine, but sadly it's one of the ones I put away in storage until we get into our house. The slimmer size and lighter weight is nice, but I do wish they had the removable pocket clip.
-
I finally got a OG Wave. They are not hard to find or anything it just always got pushed to the back burner for years, but I traded for one and I quite like it. I like how it is smaller than the new Wave. Nothing against the new Waves size as I like that in its own right, but the smaller size is nice.
Congrats on getting an OG Wave Cap :tu: I like mine, but sadly it's one of the ones I put away in storage until we get into our house. The slimmer size and lighter weight is nice, but I do wish they had the removable pocket clip.
That is the one downside I noticed. With its smaller size it would be excellent if it had the pocket clip option like the newer Wave.
-
Hmm guess I never posted when I got my lateest Leatherman.
Little Boy.
That just happened.
-
New surge, Skeletool CX (sold now), Supertool 300, PS4. Really digging the new pliers!
-
I just got a style ps , it might replace the classic Swiss on my keys. I haven't made up my mind yet
-
I also just got a new wave last month
-
Got a Skeletool and Mini-Skeletool in the mail today.
-
How did you get the Style PS to stay shut for the picture?
-
How did you get the Style PS to stay shut for the picture?
Think outside the box....clear packing tape ;)
-
How did you get the Style PS to stay shut for the picture?
Think outside the box....clear packing tape ;)
Well done. :tu:
-
Got a Skeletool and Mini-Skeletool in the mail today.
I can't see any tape.
Cool pic
-
Got a Skeletool and Mini-Skeletool in the mail today.
I can't see any tape.
Cool pic
That is the point JA. :tu:
-
Sometimes I think looking at this forum on a work computer is like kissing your sister.
-
OHT.
-
Sometimes I think looking at this forum on a work computer is like kissing your sister.
How hot is your sister? :think:
-
I don't have a sister, but my wife's sister.... :drool:
-
I don't have a sister, but my wife's sister.... :drool:
So before I hit send on this cut and paste email to your wife I was going to ask about that free Rebar? :pok:
-
I don't have a sister, but my wife's sister.... :drool:
So before I hit send on this cut and paste email to your wife I was going to ask about that free Rebar? :pok:
Please email to her sister instead.
-
Charge AL
-
I don't have a sister, but my wife's sister.... :drool:
So before I hit send on this cut and paste email to your wife I was going to ask about that free Rebar? :pok:
Please email to her sister instead.
:rofl:
-
Like new PST on the way.
-
Like new PST on the way.
Gotta love those PSTs, and nice score on that one by the way :tu:
-
Thanks !
What have I gotten myself into, I just put a bid in on a Micra :D
-
Thanks !
What have I gotten myself into, I just put a bid in on a Micra :D
It's a slippery slope man, and you certainly won't be helped hanging out in this place....but that depends on what kind of help you need....plenty of enablers here ;)
-
Thanks !
What have I gotten myself into, I just put a bid in on a Micra :D
You just got yourself into a sweet little keychain sized tool. :tu:
-
Thanks !
What have I gotten myself into, I just put a bid in on a Micra :D
You just got yourself into a sweet little keychain sized tool. :tu:
Could be the gateway drug to a multi tool addiction :D
-
so got a BO Wave with bit kit to go with my old squirt p4 i've had for years . . . no pictures though, my daughter confiscated it until christmas :( :(
-
so got a BO Wave with bit kit to go with my old squirt p4 i've had for years . . . no pictures though, my daughter confiscated it until christmas :( :(
The waiting is the hardest part ;)
-
so got a BO Wave with bit kit to go with my old squirt p4 i've had for years . . . no pictures though, my daughter confiscated it until christmas :( :(
Welcome to the forums.
That your Lab in your avatar? What great dogs.
-
thanks :) yup, thats Shadow. he's only a (big) puppy but they're a great dog.
-
thanks :) yup, thats Shadow. he's only a (big) puppy but they're a great dog.
Shadow looks like a sweet pup !
here's my Rosie
(http://i86.photobucket.com/albums/k115/asc67/Rosie%202012/IMG_3247.jpg) (http://s86.photobucket.com/user/asc67/media/Rosie%202012/IMG_3247.jpg.html)
-
she's lovely Steve ! dogs are the best companions ever :)
-
I don't have a sister, but my wife's sister.... :drool:
So before I hit send on this cut and paste email to your wife I was going to ask about that free Rebar? :pok:
Please email to her sister instead.
:rofl:
:worthless:
-
:facepalm:
-
Just got a mini from scattergun13.
It a cool little tool.
But it really makes me regret selling my crunch and pst :bnghd:
-
I don't have a sister, but my wife's sister.... :drool:
So before I hit send on this cut and paste email to your wife I was going to ask about that free Rebar? :pok:
Please email to her sister instead.
:rofl:
:worthless:
You Sir are a smart man. :tu:
But it really makes me regret selling my crunch and pst :bnghd:
Didn't care for the Crunch Joel? Been looking at them.
-
I don't have a sister, but my wife's sister.... :drool:
So before I hit send on this cut and paste email to your wife I was going to ask about that free Rebar? :pok:
Please email to her sister instead.
:rofl:
:worthless:
You Sir are a smart man. :tu:
But it really makes me regret selling my crunch and pst :bnghd:
Didn't care for the Crunch Joel? Been looking at them.
Its a nice tool. I just never used it.
No scissors or saw and small phillips just wasn't enough tools for me. I got one for a work tool. It didn't work out
I did like the serrated sheepsfoot blade.
-
If you want a compact tool with locking pliers then it is hard to go past a Crunch, but if you don't need locking pliers then they have a limited toolset and are a bit fiddly to set up the pliers ready for use. That being said, I do like my Crunches, and have one in each of my vehicles.
-
If you want a compact tool with locking pliers then it is hard to go past a Crunch, but if you don't need locking pliers then they have a limited toolset and are a bit fiddly to set up the pliers ready for use. That being said, I do like my Crunches, and have one in each of my vehicles.
Agreed it's hard to get much both an a crunch
I had to fund bike somehow.
I did get a awesome bike out of it.
-
If you want a compact tool with locking pliers then it is hard to go past a Crunch, but if you don't need locking pliers then they have a limited toolset and are a bit fiddly to set up the pliers ready for use. That being said, I do like my Crunches, and have one in each of my vehicles.
Agreed it's hard to get much both an a crunch
I had to fund bike somehow.
I did get a awesome bike out of it.
All I see here is blah blah blah failed fat bike photo bomb chance.
-
If you want a compact tool with locking pliers then it is hard to go past a Crunch, but if you don't need locking pliers then they have a limited toolset and are a bit fiddly to set up the pliers ready for use. That being said, I do like my Crunches, and have one in each of my vehicles.
Agreed it's hard to get much both an a crunch
I had to fund bike somehow.
I did get a awesome bike out of it.
All I see here is blah blah blah failed fat bike photo bomb chance.
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-11-23123852_zps0443cda5.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-11-23123852_zps0443cda5.jpg.html)
I got to take a new pic
-
24k Gold finished Original Juice CS4 Glacier Blue 8)
-
That's a sweet Juice. Didn't know you could get them in the gold plating.
-
Uptown Juice :tu:
-
Or downtown pimp tool. :rofl:
My latest LM looks like smurf compared to the pimped Juice,but it is just a tool.
-
My latest LM looks like smurf compared to the pimped Juice,but it is just a tool.
Your smurf almost twice expensive of my pimp :D
http://www.ebay.com/itm/201205930205?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_sacat%3D0%26_nkw%3D201205930205%26_rdc%3D1
-
My latest LM looks like smurf compared to the pimped Juice,but it is just a tool.
Your smurf almost twice expensive of my pimp :D
http://www.ebay.com/itm/201205930205?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_sacat%3D0%26_nkw%3D201205930205%26_rdc%3D1
That's a great price,congratulations.
PS: I paid $55.20 including shipping for the OHT.
http://www.cutleryshoppe.com/leathermanoht-45closed-16tools-springloadedplierswirecutters-blackoxidefinish-blacknylonmollesheath.aspx
-
I paid $55.20 including shipping for the OHT.
:cheers:
-
I paid $55.20 including shipping for the OHT.
:cheers:
That's a great price for the OHT :tu:
-
Here's my latest Leatherman 8).
More pics can be found here (http://forum.multitool.org/index.php/topic,56123.0.html) ;).
(http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20OHT/158_zps07d934c2.jpg) (http://s739.photobucket.com/user/Rikske77/media/Leatherman%20OHT/158_zps07d934c2.jpg.html)
(http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20OHT/156_zpsd2a2b39a.jpg) (http://s739.photobucket.com/user/Rikske77/media/Leatherman%20OHT/156_zpsd2a2b39a.jpg.html)
-
Here's my latest Leatherman 8).
More pics can be found here (http://forum.multitool.org/index.php/topic,56123.0.html) ;).
(http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20OHT/158_zps07d934c2.jpg) (http://s739.photobucket.com/user/Rikske77/media/Leatherman%20OHT/158_zps07d934c2.jpg.html)
(http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20OHT/156_zpsd2a2b39a.jpg) (http://s739.photobucket.com/user/Rikske77/media/Leatherman%20OHT/156_zpsd2a2b39a.jpg.html)
What do you think of it?
-
Looks good :drool:
-
Scored another e307x on eBay - it finally arrived today!
-
I got one of the last camo Fuses from LM's sale the other day. Can't wait to get it.
-
My leatherman bit extension came today, i paid £14.99 for that!?!?? Its tiny! I thought it was going to be twice as long
-
My leatherman bit extension came today, i paid £14.99 for that!?!?? Its tiny! I thought it was going to be twice as long
Did you get the extender that goes over the Philips or the one that goes into the 2D bit slot?
-
Micra came today. I'm impressed, nice little keychain tool !
-
My leatherman bit extension came today, i paid £14.99 for that!?!?? Its tiny! I thought it was going to be twice as long
Did you get the extender that goes over the Philips or the one that goes into the 2D bit slot?
The charge bit slot, the charge should be here soon
-
Micra came today. I'm impressed, nice little keychain tool !
Glad you like it :tu:
-
Micra came today. I'm impressed, nice little keychain tool !
The amount of utilities it offers is amazing for such little package.
-
Micra came today. I'm impressed, nice little keychain tool !
It is an excellent little tool and makes for great gifts. I gave them to all of my family members a few years ago for Christmas paired with a small AAA flashlight.
-
Micra came today. I'm impressed, nice little keychain tool !
It is an excellent little tool and makes for great gifts. I gave them to all of my family members a few years ago for Christmas paired with a small AAA flashlight.
Nice combo there. You go with the Olight?
-
I just got a new Super Tool today :D. DOM is 1099 on both handles.
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg3_zps8f7b2402.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg3_zps8f7b2402.jpg.html)
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg1_zps42cfd715.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg1_zps42cfd715.jpg.html)
(http://i971.photobucket.com/albums/ae191/bdAmmo/imagejpg2_zpsdb2f9e66.jpg) (http://s971.photobucket.com/user/bdAmmo/media/imagejpg2_zpsdb2f9e66.jpg.html)
-
Nice Supertools Pat :tu:
-
Very nice ST's. :tu:
-
Looking good. :tu:
-
Thanks guys!
-
Beautiful pieces, bdAmmo! :tu:
-
Wow that´s a neat collection of supertools.
-
I have missed all the sales on Leathermans site of bo blasts,fuses and kicks. But I just received a beautiful bo fuse from Detron.
-
Micra came today. I'm impressed, nice little keychain tool !
It is an excellent little tool and makes for great gifts. I gave them to all of my family members a few years ago for Christmas paired with a small AAA flashlight.
Nice combo there. You go with the Olight?
I actually used the LM Monarch in AAA format. Paired nicely, single mode, easy tail-switch operation. Most of the people I was gifting too were not very gadgety, so I wanted to keep it simple. Plus they were stupid cheap at a local retailer :D.
-
Just received a Super Tool 200 SS (std pliers, not CC). I bought it because I thought the variant with "Leatherman, USA" around the pliers pivot was rare (I've since seen several of these for sale, so obviously not really that rare).
However, when I had a good look at it I got a pleasant surprise: all the marking on the handles (including the rulers) was laser printed/etched, not stamped like it usually is on production LMs. So, have I scored a prototype or what ? ??? :D
The other unusual LM in this box was a Squirt P4 with "Thunder Purple" scales :D
Thanks to CJ for these :tu:
-
Just received a Super Tool 200 SS (std pliers, not CC). I bought it because I thought the variant with "Leatherman, USA" around the pliers pivot was rare (I've since seen several of these for sale, so obviously not really that rare).
However, when I had a good look at it I got a pleasant surprise: all the marking on the handles (including the rulers) was laser printed/etched, not stamped like it usually is on production LMs. So, have I scored a prototype or what ? ??? :D
The other unusual LM in this box was a Squirt P4 with "Thunder Purple" scales :D
Thanks to CJ for these :tu:
The date codes and pics?
-
Just received a Super Tool 200 SS (std pliers, not CC). I bought it because I thought the variant with "Leatherman, USA" around the pliers pivot was rare (I've since seen several of these for sale, so obviously not really that rare).
However, when I had a good look at it I got a pleasant surprise: all the marking on the handles (including the rulers) was laser printed/etched, not stamped like it usually is on production LMs. So, have I scored a prototype or what ? ??? :D
The date codes and pics?
No date codes at all (and I looked carefully) ???
Sorry, can't do pics. The wording and spacing of the markings on the handles seem identical to the stamped ones, but the letters look "thinner" (less bold).
I'm definitely leaning to this being a prototype or pre-production tool. I might send a PM to CJ and see if he can tell me anything about it.
-
Just received a Super Tool 200 SS (std pliers, not CC). I bought it because I thought the variant with "Leatherman, USA" around the pliers pivot was rare (I've since seen several of these for sale, so obviously not really that rare).
However, when I had a good look at it I got a pleasant surprise: all the marking on the handles (including the rulers) was laser printed/etched, not stamped like it usually is on production LMs. So, have I scored a prototype or what ? ??? :D
The date codes and pics?
No date codes at all (and I looked carefully) ???
Sorry, can't do pics. The wording and spacing of the markings on the handles seem identical to the stamped ones, but the letters look "thinner" (less bold).
I'm definitely leaning to this being a prototype or pre-production tool. I might send a PM to CJ and see if he can tell me anything about it.
Do I need to include a digital camera in one of the next boxes I send you?? :pok:
it looks like CJ already took down some of the original pics from his FS thread. :(
-
I'm definitely leaning to this being a prototype or pre-production tool. I might send a PM to CJ and see if he can tell me anything about it.
Sure enough, this what CJ said:
That tool is preproduction. We had it at the SHOT SHOW. They went into production the next week.
-
I'm definitely leaning to this being a prototype or pre-production tool. I might send a PM to CJ and see if he can tell me anything about it.
Sure enough, this what CJ said:
That tool is preproduction. We had it at the SHOT SHOW. They went into production the next week.
very cool. :tu: sounds like you've got a unique piece of MT history for your collection. :cheers:
-
I'm definitely leaning to this being a prototype or pre-production tool. I might send a PM to CJ and see if he can tell me anything about it.
Sure enough, this what CJ said:
That tool is preproduction. We had it at the SHOT SHOW. They went into production the next week.
very cool. :tu: sounds like you've got a unique piece of MT history for your collection. :cheers:
That is great. :tu: It is a keeper then. :salute:
-
ST 300
(http://tapatalk.imageshack.com/v2/14/12/04/f16caa0cf1e647b5c77107991a321942.jpg)
Sak's rule !
-
That is great. :tu: It is a keeper then. :salute:
Most definitely a keeper ! It is always enjoyable when you get a pleasant surprise when you finally get your hands on a new tool :D (but not so much fun when you discover the seller has been "economical with the truth" and/or creative in their photo-taking, and I've had a few of those over the years >:( )
No problems with these tools fron CJ though :tu:
-
It is always enjoyable when you get a pleasant surprise when you finally get your hands on a new tool :D
I will let you think up your own childish retorts here. I can not be bothered.
-
I'm definitely leaning to this being a prototype or pre-production tool. I might send a PM to CJ and see if he can tell me anything about it.
Sure enough, this what CJ said:
That tool is preproduction. We had it at the SHOT SHOW. They went into production the next week.
That's really cool Greg :tu:
-
I'm definitely leaning to this being a prototype or pre-production tool. I might send a PM to CJ and see if he can tell me anything about it.
Sure enough, this what CJ said:
That tool is preproduction. We had it at the SHOT SHOW. They went into production the next week.
That's really cool Greg :tu:
I forgot to add that yes that is a really cool tool Greg, it is not as cool as my Rogueneer or HarleyXJGuy.
Just saying.
-
I'm definitely leaning to this being a prototype or pre-production tool. I might send a PM to CJ and see if he can tell me anything about it.
Sure enough, this what CJ said:
That tool is preproduction. We had it at the SHOT SHOW. They went into production the next week.
That's really cool Greg :tu:
I forgot to add that yes that is a really cool tool Greg, it is not as cool as my Rogueneer or HarleyXJGuy.
Just saying.
:rofl:
The only problem with Monrouge is his avatar and name are deceiving while scrolling quickly. I have to watch out for "myself" ;)
-
There's a Monrogue AND a Monrouge now ???
(http://forum.multitool.org/index.php?action=dlattach;topic=33794.0;attach=135670;image)
:ahhh
-
Hey Firiki, do not be deceived by the "Monrouge" user.....he is my Vice Archnemesis in disguise :mn:
-
Hey Firiki, do not be deceived by the "Monrouge" user.....he is my Vice Archnemesis in disguise :mn:
firiki thought Monrogue's Vice Archnemesis was Dmac or Harley. firiki don't know anymore :ahhh
Sanity is not firiki's concern, however :tu:
-
There's a Monrogue AND a Monrouge now ???
(http://forum.multitool.org/index.php?action=dlattach;topic=33794.0;attach=135670;image)
:ahhh
Nah its all good finki.
I talked with Grant and Megan and it seems there is some kind of forum error that misspells peoples forum name. Weird huh.
I assure you it is the Monrogue we all know and umm, tolerate.
-
Nah its all good finki.
I talked with Grant and Megan and it seems there is some kind of forum error that misspells peoples forum name. Weird huh.
I assure you it is the Monrogue we all know and umm, tolerate.
firiki is no longer a sane person thanks to these forums :rofl:
-
Nah its all good finki.
I talked with Grant and Megan and it seems there is some kind of forum error that misspells peoples forum name. Weird huh.
I assure you it is the Monrogue we all know and umm, tolerate.
firiki is no longer a sane person thanks to these forums :rofl:
Do not feel bad finki you are not the only one, I am starting to think Monrogue is bi polar.
-
Nah its all good finki.
I talked with Grant and Megan and it seems there is some kind of forum error that misspells peoples forum name. Weird huh.
I assure you it is the Monrogue we all know and umm, tolerate.
firiki is no longer a sane person thanks to these forums :rofl:
Do not feel bad finki you are not the only one, I am starting to think Monrogue is bi polar.
Aren't we all :think: ? firiki approves of being called finki BTW :drink:
-
Hey Firiki, do not be deceived by the "Monrouge" user.....he is my Vice Archnemesis in disguise :mn:
firiki thought Monrogue's Vice Archnemesis was Dmac or Harley. firiki don't know anymore :ahhh
Sanity is not firiki's concern, however :tu:
Firiki is correct on the highlighted name...Firiki can put 2 and 2 together ;)
-
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt :pok:
-
Hey Firiki, do not be deceived by the "Monrouge" user.....he is my Vice Archnemesis in disguise :mn:
firiki thought Monrogue's Vice Archnemesis was Dmac or Harley. firiki don't know anymore :ahhh
Sanity is not firiki's concern, however :tu:
Firiki is correct on the highlighted name...Firiki can put 2 and 2 together ;)
I just wish I was better at math and would stop quoting myself.
-
Hey Firiki, do not be deceived by the "Monrouge" user.....he is my Vice Archnemesis in disguise :mn:
firiki thought Monrogue's Vice Archnemesis was Dmac or Harley. firiki don't know anymore :ahhh
Sanity is not firiki's concern, however :tu:
Firiki is correct on the highlighted name...Firiki can put 2 and 2 together ;)
I just wish I was better at math and would stop quoting myself.
Do not beat yourself up to much about that, I am not so good at math either.
The quoting yourself thing is kinda weird though.
-
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt :pok:
:viking:
-
Hey Firiki, do not be deceived by the "Monrouge" user.....he is my Vice Archnemesis in disguise :mn:
firiki thought Monrogue's Vice Archnemesis was Dmac or Harley. firiki don't know anymore :ahhh
Sanity is not firiki's concern, however :tu:
Firiki is correct on the highlighted name...Firiki can put 2 and 2 together ;)
I just wish I was better at math and would stop quoting myself.
Do not beat yourself up to much about that, I am not so good at math either.
The quoting yourself thing is kinda weird though.
Monrogue laughs at this exchange :tu:
-
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt :pok:
:viking:
Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis :pok:
-
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt :pok:
:viking:
Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis :pok:
DANCE OFF! :duel:
-
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt :pok:
:viking:
Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis :pok:
DANCE OFF! :duel:
I'd pay good money to watch that :dd:
-
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt :pok:
:viking:
Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis :pok:
DANCE OFF! :duel:
I'd pay good money to watch that :dd:
That would be quite a site I bet ;)
-
My latest is a Surge.
I've also got a Micra, Blast and Fuse.
The Micra gets used the most.
-
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt :pok:
:viking:
Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis :pok:
DANCE OFF! :duel:
I'd pay good money to watch that :dd:
That would be quite a site I bet ;)
Don't be hating my skillz!
-
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt :pok:
:viking:
Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis :pok:
DANCE OFF! :duel:
I'd pay good money to watch that :dd:
That would be quite a site I bet ;)
Don't be hating my skillz!
I bet you do a mean breakdance routine....
-
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt :pok:
:viking:
Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis :pok:
DANCE OFF! :duel:
I'd pay good money to watch that :dd:
That would be quite a site I bet ;)
Don't be hating my skillz!
I bet you do a mean breakdance routine....
Finally!
My wife would disagree with you and asks that you not give me any ideas. Her words.
-
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt :pok:
:viking:
Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis :pok:
DANCE OFF! :duel:
I'd pay good money to watch that :dd:
That would be quite a site I bet ;)
Don't be hating my skillz!
I bet you do a mean breakdance routine....
Finally!
My wife would disagree with you and asks that you not give me any ideas. Her words.
As long as you don't pull or sprain anything, there shouldn't be anything for her to worry about ;)
-
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt :pok:
:viking:
Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis :pok:
DANCE OFF! :duel:
I'd pay good money to watch that :dd:
That would be quite a site I bet ;)
Don't be hating my skillz!
I bet you do a mean breakdance routine....
Finally!
My wife would disagree with you and asks that you not give me any ideas. Her words.
As long as you don't pull or sprain anything, there shouldn't be anything for her to worry about ;)
Yeah something about never showing her face around her friends and boss again.
Something about last years work Christmas party.
-
Lol
-
I reclaim this thread in the name of acquired Leatherman tools!
I got a Style today. Not a Style PS or CS, just a Style. Tiny Multitool POWER!!!
-
I reclaim this thread in the name of acquired Leatherman tools!
I got a Style today. Not a Style PS or CS, just a Style. Tiny Multitool POWER!!!
Lame.
-
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
-
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
That one is the scissor model right?
-
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
Surprisingly I had no idea the E4 had a 3D Philips. I must have one now! :facepalm:
-
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
That one is the scissor model right?
E4 has wire strippers in place of the pliers/scissors.(http://tapatalk.imageshack.com/v2/14/12/14/6971ce5410e0de418129958fca0f5c18.jpg)
-
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
That one is the scissor model right?
E4 has wire strippers in place of the pliers/scissors.(http://tapatalk.imageshack.com/v2/14/12/14/6971ce5410e0de418129958fca0f5c18.jpg)
Are there folks out here who are not electricians who do so much wire stripping they have to carry a tool like this all the time?
-
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
That one is the scissor model right?
E4 has wire strippers in place of the pliers/scissors.(http://tapatalk.imageshack.com/v2/14/12/14/6971ce5410e0de418129958fca0f5c18.jpg)
Are there folks out here who are not electricians who do so much wire stripping they have to carry a tool like this all the time?
I doubt it, but one can never be to prepared I guess. In all honesty I only really use the tip of the pliers on the small tools like this anyways so if I had one it would not be much of a problem having wire strippers for the rest of the length.
-
My latest is a pair of BO Rebar handles with pliers removed, and a BO CC head from a Fuse or Wave or something. To be honest I got these a while back but have only just fitted the CC head this weekend. Now I just have to decide what I'm doing with the loadout in the handles :whistle:
-
My latest is a pair of BO Rebar handles with pliers removed, and a BO CC head from a Fuse or Wave or something. To be honest I got these a while back but have only just fitted the CC head this weekend. Now I just have to decide what I'm doing with the loadout in the handles :whistle:
Knifeless, with scissors, large bit driver, no saw and 7/8/10/13mm wrenches. 8) And a pocket clip. :pok:
-
My latest is a pair of BO Rebar handles with pliers removed, and a BO CC head from a Fuse or Wave or something. To be honest I got these a while back but have only just fitted the CC head this weekend. Now I just have to decide what I'm doing with the loadout in the handles :whistle:
Knifeless, with scissors, large bit driver, no saw and 7/8/10/13mm wrenches. 8) And a pocket clip. :pok:
Knifeless with scissors is certainly tempting. Who's got a spare pair of BO Wave/Fuse/Blast scissors? Anyone?
I have got a BO small flat driver from a Blast which is better than the stock Rebar one for electrical work, so they might get swapped over. I'll prob keep saw and file, but transfer them over to the knife blade positions if I go knifeless. However, every time I pick it up I keep thinking "If I'm going to carry this, why not carry my BO Spirit S instead", so I don't know how much time and effort I'll spend on this to be honest
-
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
That one is the scissor model right?
E4 has wire strippers in place of the pliers/scissors.(http://tapatalk.imageshack.com/v2/14/12/14/6971ce5410e0de418129958fca0f5c18.jpg)
Are there folks out here who are not electricians who do so much wire stripping they have to carry a tool like this all the time?
I keep this one with my CT Lite in my laptop bag, takes up less space compared to full sized wire strippers. I keep a Squirt ES4 (adds scissors, drops 3D phillips) in my guitar bag in case I need to fix any guitar pedals when I'm out. And honestly, I used these around the house more than regular wire strippers, well, because I like them :) But no, they don't get carried around all the time.
-
However, every time I pick it up I keep thinking "If I'm going to carry this, why not carry my BO Spirit S instead", so I don't know how much time and effort I'll spend on this to be honest
I get that too. Pick up my Wave or Rebar, end up with my Spirit. Super Tool 300, Swisstool. :-\ I like the customisable nature of the Leatherman tools, and appreciate the tool loads, design and history; I just prefer the Victorinoxes.
-
Just received my bo mut,looks good to me
-
However, every time I pick it up I keep thinking "If I'm going to carry this, why not carry my BO Spirit S instead", so I don't know how much time and effort I'll spend on this to be honest
I get that too. Pick up my Wave or Rebar, end up with my Spirit. Super Tool 300, Swisstool. :-\ I like the customisable nature of the Leatherman tools, and appreciate the tool loads, design and history; I just prefer the Victorinoxes.
I mean if you do not dig you Rebar and it is stainless I could find it a new home for the right price.
Well parts of it anyhow. :whistle:
-
However, every time I pick it up I keep thinking "If I'm going to carry this, why not carry my BO Spirit S instead", so I don't know how much time and effort I'll spend on this to be honest
I get that too. Pick up my Wave or Rebar, end up with my Spirit. Super Tool 300, Swisstool. :-\ I like the customisable nature of the Leatherman tools, and appreciate the tool loads, design and history; I just prefer the Victorinoxes.
As I see it ...
Reasons to carry Rebar instead of Spirit S:
Supremely better for cutting stranded wire
Better lanyard for working at heights and such
Cheaper
Reasons to carry Spirit S instead of Rebar:
Much better ergonomics
Outboard tools - easier access and better orientated knives/saw
Pry tool
Chisel/scraper
More flat drivers
Better awl especially for narrower holes sizes
Both are good tools though, subject to user preferences. I can't see me choosing it as pocket tool of the day, even if I was to make it knifeless, so I might chuck it in my bike bag. It'll get very little (if any) use in there, but at least there's a half decent tool in the bag should I ever need one anywhere
-
However, every time I pick it up I keep thinking "If I'm going to carry this, why not carry my BO Spirit S instead", so I don't know how much time and effort I'll spend on this to be honest
I get that too. Pick up my Wave or Rebar, end up with my Spirit. Super Tool 300, Swisstool. :-\ I like the customisable nature of the Leatherman tools, and appreciate the tool loads, design and history; I just prefer the Victorinoxes.
As I see it ...
Reasons to carry Rebar instead of Spirit S:
Supremely better for cutting stranded wire
Better lanyard for working at heights and such
Cheaper
Reasons to carry Spirit S instead of Rebar:
Much better ergonomics
Outboard tools - easier access and better orientated knives/saw
Pry tool
Chisel/scraper
More flat drivers
Better awl especially for narrower holes sizes
Both are good tools though, subject to user preferences. I can't see me choosing it as pocket tool of the day, even if I was to make it knifeless, so I might chuck it in my bike bag. It'll get very little (if any) use in there, but at least there's a half decent tool in the bag should I ever need one anywhere
Does the Spirit S have a bit driver like the Rebar? If not I would put that as a Rebar plus.
Sigh I am really looking hard at the Spirit so I am going to need you to talk me out of it now.
-
The Sprits (all versions) don't have the bit driver, but the Rebar doesn't either. The Rebar does have a very good phillips screwdriver - IMO better than the one on the Spirit. The Leatherman removeable bit driver fits the Rebar, but also fits the Spirit too. Win-win. :tu:
-
The Sprits (all versions) don't have the bit driver, but the Rebar doesn't either. The Rebar does have a very good phillips screwdriver - IMO better than the one on the Spirit. The Leatherman removeable bit driver fits the Rebar, but also fits the Spirit too. Win-win. :tu:
That answers my question, thanks.
-
The Sprits (all versions) don't have the bit driver, but the Rebar doesn't either. The Rebar does have a very good phillips screwdriver - IMO better than the one on the Spirit. The Leatherman removeable bit driver fits the Rebar, but also fits the Spirit too. Win-win. :tu:
That answers my question, thanks.
Answers it in that you now want a Spirit as well? :pok:
-
The Sprits (all versions) don't have the bit driver, but the Rebar doesn't either. The Rebar does have a very good phillips screwdriver - IMO better than the one on the Spirit. The Leatherman removeable bit driver fits the Rebar, but also fits the Spirit too. Win-win. :tu:
That answers my question, thanks.
Answers it in that you now want a Spirit as well? :pok:
I think we all know the answer to that one already.
-
The Sprits (all versions) don't have the bit driver, but the Rebar doesn't either. The Rebar does have a very good phillips screwdriver - IMO better than the one on the Spirit. The Leatherman removeable bit driver fits the Rebar, but also fits the Spirit too. Win-win. :tu:
That answers my question, thanks.
I think the Phillips comparison may depend on the screws you encounter, so is a bit subjective really. I've never had an issue with the Phillips on the Spirit that I can recall, although I've never done a side by side comparison over a range of screws. Plus if you count the bit adaptor for the LM Phillips, you need to count the bit wrench or ratchet from Vic. I consider the bit wrench vastly superior, and it's great for high torque work and for where access is extremely limited and there isn't the clearance to get a full multitool in.
Similar comparisons could also be personal preference such as the Rebar has a wider faced file, which may mean quicker working for some, or less able to get in narrow spaces for others. The LM saw cuts on the pull stroke but is a thinner section and therefore has to remove less material than the bidirectional saw on the Spirit ... and so on
-
Not really mine... but I did pick this up for a friend in the Army today, had his name laser-engraved on the blade:
(https://lh4.googleusercontent.com/CnVNlQpecDkG7gpnF_CuuaaaFrkusbzYxFOgkfEoXLpDD7Nodr3YJLNhfRVAb8AExeKRLWJl-ag=w1416-h695)
-
I'd have to say that the E4 or ES4 haven't been on my MT radar until viewing this thread the past few days. I haven't bought a MT in a while so it may be in order soon.
-
Just bought a Surge and an AL
-
Just bought a Surge and an AL
You should join Lichbote and babolas club.
Also welcome.
-
Just bought a Surge and an AL
You should join Lichbote and babolas club.
Also welcome.
We don't welcome members who own tools with lesser grade metals, so peeps with AL and ALX Charges are out :D
Only joking, Iroshgrouch...AL is one sweet piece. :tu:
-
We don't welcome members who own tools with lesser grade metals, so peeps with AL and ALX Charges are out :D
Guess you are going to have to sell me your acid washed Wave then. :tu:
-
Not really mine... but I did pick this up for a friend in the Army today, had his name laser-engraved on the blade:
(https://lh4.googleusercontent.com/CnVNlQpecDkG7gpnF_CuuaaaFrkusbzYxFOgkfEoXLpDD7Nodr3YJLNhfRVAb8AExeKRLWJl-ag=w1416-h695)
Whoops, looks like that image link is no good, so here's that pic:
(https://lh3.googleusercontent.com/--rFeshvd3d0/VJYdJChMpSI/AAAAAAAACzI/TcCna2nuA1s/s695/mutyan.jpg)
-
My new 'Acid Wave'
(https://farm8.staticflickr.com/7551/16069306455_317bc4c9c0_b_d.jpg)
-
Hi, I'm new here, just posted my intro thread over there and adding to this one over here.
Got gifted a Charge Ti some years back, only recently started using it. Bit too nice for EDC at work so I picked up a $20 Wingman during the Amazon black friday-ish sales.
I know it's had very mixed reviews on here but I think it's amazingly good for the money, not perfect but more than adequate for my needs.
Now what to buy next...
-
My new 'Acid Wave'
(https://farm8.staticflickr.com/7551/16069306455_317bc4c9c0_b_d.jpg)
Man, that's beautiful, especially with the Rebar jaws. Well done.
-
My wife just picked me up a Charge Ti for $15 - #DealOfALifetime
(http://i1377.photobucket.com/albums/ah42/DazMechanical/3FA52EBC-D65B-4C4A-8C5C-CFBE7A0130AF_zpsmlfk9rbc.jpg) (http://s1377.photobucket.com/user/DazMechanical/media/3FA52EBC-D65B-4C4A-8C5C-CFBE7A0130AF_zpsmlfk9rbc.jpg.html)
-
Man, that's beautiful, especially with the Rebar jaws. Well done.
Thanks brother, Rebar pliers definitely complete the look. :tu:
-
My wife just picked me up a Charge Ti for $15 - #DealOfALifetime
LOL, what's next - an LM Surge for $8 on garage sale in Wangaratta? ::)
Good catch, as unbelievable as it sounds. ;)
-
My wife just picked me up a Charge Ti for $15 - #DealOfALifetime
(http://i1377.photobucket.com/albums/ah42/DazMechanical/3FA52EBC-D65B-4C4A-8C5C-CFBE7A0130AF_zpsmlfk9rbc.jpg) (http://s1377.photobucket.com/user/DazMechanical/media/3FA52EBC-D65B-4C4A-8C5C-CFBE7A0130AF_zpsmlfk9rbc.jpg.html)
$15! Killer deal! :tu:
-
It is pretty unbeleivable and my wife thought it was a bit sus when the woman wasn't home when they said to pick it up, she gave her a ring and went back a little later to pick it up and it was all good. I guess it may have been left there by her ex or something. My wife didn't ask... :D
-
It is pretty unbeleivable and my wife thought it was a bit sus when the woman wasn't home when they said to pick it up, she gave her a ring and went back a little later to pick it up and it was all good. I guess it may have been left there by her ex or something. My wife didn't ask... :D
I'll give you 15.99 :pok: :pok: :cheers:
Congrats!
-
My last is a squirt ps4, arrived 2 hours after my style ps.
-
My wife just picked me up a Charge Ti for $15 - #DealOfALifetime
LOL, what's next - an LM Surge for $8 on garage sale in Wangaratta? ::)
Good catch, as unbelievable as it sounds. ;)
Even I might buy a Surge at that price. :pok:
-
My wife just picked me up a Charge Ti for $15 - #DealOfALifetime
LOL, what's next - an LM Surge for $8 on garage sale in Wangaratta? ::)
Good catch, as unbelievable as it sounds. ;)
Even I might buy a Surge at that price. :pok:
I'll still pass :D
I did however get a new-to-me Leatherman through the letterbox today. A good condition Sideclip. I know what I'll be carrying for the next couple of days :D
-
$18 sidekick from HD.
-
My wife just picked me up a Charge Ti for $15 - #DealOfALifetime
(http://i1377.photobucket.com/albums/ah42/DazMechanical/3FA52EBC-D65B-4C4A-8C5C-CFBE7A0130AF_zpsmlfk9rbc.jpg) (http://s1377.photobucket.com/user/DazMechanical/media/3FA52EBC-D65B-4C4A-8C5C-CFBE7A0130AF_zpsmlfk9rbc.jpg.html)
Wow congratulations !
-
My wife just picked me up a Charge Ti for $15 - #DealOfALifetime
LOL, what's next - an LM Surge for $8 on garage sale in Wangaratta? ::)
Good catch, as unbelievable as it sounds. ;)
Even I might buy a Surge at that price. :pok:
But you'll have to be at Wangaratta for that. :twak:
Pales in comparison to significance of your current location, though ;)
-
Just bought a Surge and an AL
You should join Lichbote and babolas club.
Also welcome.
Thanks, glad to be here
-
Just bought a Surge and an AL
You should join Lichbote and babolas club.
Also welcome.
We don't welcome members who own tools with lesser grade metals, so peeps with AL and ALX Charges are out :D
Only joking, Iroshgrouch...AL is one sweet piece. :tu:
I will have a TTI soon, very soon Lol
-
Radioshack E4 from Lynn.
-
Radioshack E4 from Lynn.
Nice one Cap'n :tu: I've yet to get one of those. I'm not one for the pliers head on those, but have always wished they'd do that 3D Phillips on other models. Let us know how you get on with it :cheers:
-
Radioshack E4 from Lynn.
Nice one Cap'n :tu: I've yet to get one of those. I'm not one for the pliers head on those, but have always wished they'd do that 3D Phillips on other models. Let us know how you get on with it :cheers:
It won't be a user. I just always wanted one for my collection. Once my Style PS gets back from warranty service it will be my go to key chain sized tool once again.
-
Radioshack E4 from Lynn.
Nice one Cap'n :tu: I've yet to get one of those. I'm not one for the pliers head on those, but have always wished they'd do that 3D Phillips on other models. Let us know how you get on with it :cheers:
Never seen one in real life but I thought the Style PS would be a little to large for keychain use?
It won't be a user. I just always wanted one for my collection. Once my Style PS gets back from warranty service it will be my go to key chain sized tool once again.
-
Nah. The Style PS is perfect size for key chain use.
-
Nah. The Style PS is perfect size for key chain use.
Yup. I always toss between the Style and the Micra. Very similar in size, weight and function. The only difference to me is one is a modern tool another is a classic. 8)
-
My new 'Acid Wave'
(https://farm8.staticflickr.com/7551/16069306455_317bc4c9c0_b_d.jpg)
Beautiful picture of a beautiful Wave ... :drool:
Well done mate, very well done indeed :hatsoff:.
-
Nah. The Style PS is perfect size for key chain use.
Yup. I always toss between the Style and the Micra. Very similar in size, weight and function. The only difference to me is one is a modern tool another is a classic. 8)
What about the Squirt?
Also I checked my mail and my Acid Wave has not arrived yet?
-
A ST300 will be heading my way! :woohoo:
-
A ST300 will be heading my way! :woohoo:
Jealous and stuff. :drool:
-
My wife just picked me up a Charge Ti for $15 - #DealOfALifetime
LOL, what's next - an LM Surge for $8 on garage sale in Wangaratta? ::)
Good catch, as unbelievable as it sounds. ;)
Even I might buy a Surge at that price. :pok:
I'll still pass :D
I did however get a new-to-me Leatherman through the letterbox today. A good condition Sideclip. I know what I'll be carrying for the next couple of days :D
WHAT?!?
Correct me if I'm not wrong,but I've got your last Sideclip :pok:
-
My wife just picked me up a Charge Ti for $15 - #DealOfALifetime
LOL, what's next - an LM Surge for $8 on garage sale in Wangaratta? ::)
Good catch, as unbelievable as it sounds. ;)
Even I might buy a Surge at that price. :pok:
I'll still pass :D
I did however get a new-to-me Leatherman through the letterbox today. A good condition Sideclip. I know what I'll be carrying for the next couple of days :D
WHAT?!?
Correct me if I'm not wrong,but I've got your last Sideclip :pok:
How many do you have? Didn't you get my Sideclip from lowtech? :think:
-
My wife just picked me up a Charge Ti for $15 - #DealOfALifetime
LOL, what's next - an LM Surge for $8 on garage sale in Wangaratta? ::)
Good catch, as unbelievable as it sounds. ;)
Even I might buy a Surge at that price. :pok:
I'll still pass :D
I did however get a new-to-me Leatherman through the letterbox today. A good condition Sideclip. I know what I'll be carrying for the next couple of days :D
WHAT?!?
Correct me if I'm not wrong,but I've got your last Sideclip :pok:
Yup :tu: I decided to give it another go. I got rid of the one you have because I initially though I could mod it somehow (I forget how - but it might have been adding PST II scissors) but it turned out I couldn't so I let it go. After I started carrying the Knifeless Octane (no scissors) and a couple of PSTs (one of which has a NiteIze clip added), I figured I might give a Sideclip another go and see how they all compare .... and this one turned up. Since I've had it though, all I've done is open some cellophane food packaging and cut a paperclip :-\
-
A ST300 will be heading my way! :woohoo:
Jealous and stuff. :drool:
I have mine I am selling in the trade section :)
-
A ST300 will be heading my way! :woohoo:
Jealous and stuff. :drool:
I have mine I am selling in the trade section :)
Thanks man, but I plan on winning one the end of the month. :whistle:
-
My wife just picked me up a Charge Ti for $15 - #DealOfALifetime
LOL, what's next - an LM Surge for $8 on garage sale in Wangaratta? ::)
Good catch, as unbelievable as it sounds. ;)
Even I might buy a Surge at that price. :pok:
I'll still pass :D
I did however get a new-to-me Leatherman through the letterbox today. A good condition Sideclip. I know what I'll be carrying for the next couple of days :D
WHAT?!?
Correct me if I'm not wrong,but I've got your last Sideclip :pok:
How many do you have? Didn't you get my Sideclip from lowtech? :think:
Two Dr Z, the one I got from Al is part of the permanent collection. Your old one became the Kirkyclip
-
(http://tapatalk.imageshack.com/v2/14/12/24/7b8746229168d36c4d9b481b5d7412f9.jpg) just got that beast.
Sent from my iPhone using Tapatalk
-
(http://tapatalk.imageshack.com/v2/14/12/24/7b8746229168d36c4d9b481b5d7412f9.jpg) just got that beast.
Sent from my iPhone using Tapatalk
Wow! :tu:
-
Wow! :tu:
Relax Balboa it is not a Surge. :pok:
-
Wow! :tu:
Relax Balboa it is not a Surge. :pok:
I'm not 'Balboa' so you can relax too :twak:
-
Oooh things are getting Rocky...
-
Oooh things are getting Rocky...
Nah, deep down I'm really a Softie... ;)
-
Oooh things are getting Rocky...
Yep that is now your new nick name, RB. :pok:
-
Just the day before Christmas I got theese four Leathermans from members of this forum. I´m happy because those are: for me anyway "hard to get tools".
Fuse Camo
Kick Bo
Skeletool old plain edge
Juice Pro
-
Just the day before Christmas I got theese four Leathermans from members of this forum. I´m happy because those are: for me anyway "hard to get tools".
Fuse Camo
Kick Bo
Skeletool old plain edge
Juice Pro
Very nice, that camo looks real good. :tu:
-
Just the day before Christmas I got theese four Leathermans from members of this forum. I´m happy because those are: for me anyway "hard to get tools".
Fuse Camo
Kick Bo
Skeletool old plain edge
Juice Pro
Nice haul man.
Skeletool old plain edge is the best kind of Skelly imo.
-
The man got a plain edge Skeletool. That's class :tu:
-
Oooh things are getting Rocky...
Nah, deep down I'm really a Softie... ;)
Not a very good name for a boxer: Softie Balboa
-
Thanks guys. Maybe you are wright Sawman. I do feel a little bit more classy now. :D
-
Picked up one of the new Juice C2's to see how well the improved drivers help opening and not stabbing your thumb. First thing that happened when I went to deploy the drivers was they started to come out, my nail slipped off and stabbed myself in the thumb. Even with the aligned notch to deploy the drivers the length of the drivers the retention on them still makes them bite your thumb. Kind of disappointing since Leatherman spent all that time and money on developing the new Juice line and it still has the same issue as before. If the retention on them was not incredibly stiff it would help, but every juice I have owned is like this. I also hate the neutered blade on the new juice line.
-
I just purchased a sidekick and another wingman, the wingman I will be turning into a one wing.
-
Picked up one of the new Juice C2's to see how well the improved drivers help opening and not stabbing your thumb. First thing that happened when I went to deploy the drivers was they started to come out, my nail slipped off and stabbed myself in the thumb. Even with the aligned notch to deploy the drivers the length of the drivers the retention on them still makes them bite your thumb. Kind of disappointing since Leatherman spent all that time and money on developing the new Juice line and it still has the same issue as before. If the retention on them was not incredibly stiff it would help, but every juice I have owned is like this. I also hate the neutered blade on the new juice line.
Ok Cappy put the Juice down and slowly back away. You got to learn to let it go, not every LM has to be a homerun.
Need a light carry tool? Skelly it up.
-
Picked up one of the new Juice C2's to see how well the improved drivers help opening and not stabbing your thumb. First thing that happened when I went to deploy the drivers was they started to come out, my nail slipped off and stabbed myself in the thumb. Even with the aligned notch to deploy the drivers the length of the drivers the retention on them still makes them bite your thumb. Kind of disappointing since Leatherman spent all that time and money on developing the new Juice line and it still has the same issue as before. If the retention on them was not incredibly stiff it would help, but every juice I have owned is like this. I also hate the neutered blade on the new juice line.
Ok Cappy put the Juice down and slowly back away. You got to learn to let it go, not every LM has to be a homerun.
Need a light carry tool? Skelly it up.
Oh i'm not mad about it at all. If I was you would know. I just find it funny that the thing they spend time and money trying to improve is just as bad if not worse than before.
The Skeletool is definitely the last thing I need right now. I have a love hate relationship with it. I would love to have one when I do not own one, but every time I buy one I remember how much I hate it.
-
It must be Christmas, I just accidentally ordered this...
http://www.photonlight.com/knives-and-multi-tools/leatherman-oht-multi-tool/
Then I carelessly ordered this.....
http://www.photonlight.com/clearance-items/leatherman-surge-w-leather-sheath-closeout-30-off/
OOPS!
-
Picked up one of the new Juice C2's to see how well the improved drivers help opening and not stabbing your thumb. First thing that happened when I went to deploy the drivers was they started to come out, my nail slipped off and stabbed myself in the thumb. Even with the aligned notch to deploy the drivers the length of the drivers the retention on them still makes them bite your thumb. Kind of disappointing since Leatherman spent all that time and money on developing the new Juice line and it still has the same issue as before. If the retention on them was not incredibly stiff it would help, but every juice I have owned is like this. I also hate the neutered blade on the new juice line.
Ok Cappy put the Juice down and slowly back away. You got to learn to let it go, not every LM has to be a homerun.
Need a light carry tool? Skelly it up.
Oh i'm not mad about it at all. If I was you would know. I just find it funny that the thing they spend time and money trying to improve is just as bad if not worse than before.
The Skeletool is definitely the last thing I need right now. I have a love hate relationship with it. I would love to have one when I do not own one, but every time I buy one I remember how much I hate it.
What do you hate about it?
Does not seem like something someone would hate. Got the good bit driver with some reach, oho blade and light weight with a pocket clip.
I could see take it or leave it attitude but wonder what makes you dislike it so much. Did it make you bleed too?
-
I do not like how you can only use the bit driver with one handle fully extended or at a 90 degree angle. The pocket clip is on the wrong handle and the clip does not offer good retention. The second bit is not retained in the handle very well and can be lost. I also have had rust issues with the Skeletool and Freestyle. The Pliers do not inspire confidence either.
-
I do not like how you can only use the bit driver with one handle fully extended or at a 90 degree angle.
Isn't that how all the bit drivers work? To much reach or leverage for your tastes? :pok:
The pocket clip is on the wrong handle and the clip does not offer good retention.
Take it off and bend it a little till you get the retention you want? Maybe I am off about this being something that works? Never did it on mine yet.
The second bit is not retained in the handle very well and can be lost.
Ok. I plan to carry bit cards and an extension in a belth sheath so no worries on this front. But as a stand alone tool this could have been desgined better.
I also have had rust issues with the Skeletool and Freestyle.
Lame. Hope this is not a major issue for my Skelly.
The Pliers do not inspire confidence either.
Yeah just got to embrace the fact they are light duty pliers. Kind of something between the ST 300 and the super tweezers on SAKs.
-
ST 300 EOD I got as ~$30 worth of trade...love it!
(https://farm8.staticflickr.com/7528/15529509844_a31ce07a22_b_d.jpg)
-
ST 300 EOD I got as ~$30 worth of trade...love it!
(https://farm8.staticflickr.com/7528/15529509844_a31ce07a22_b_d.jpg)
Score!
Good job Rocky.
-
I do not like how you can only use the bit driver with one handle fully extended or at a 90 degree angle.
Isn't that how all the bit drivers work? To much reach or leverage for your tastes? :pok:
:rofl:
The pocket clip is on the wrong handle and the clip does not offer good retention.
Where would you rather have it? I don't see the problem...
Mine retains well.
The second bit is not retained in the handle very well and can be lost.
Mine is fine... as long as you don't throw it across a field :facepalm:
-
I was wondering this also.
Where would you want the clip to be?
Is this another tip up thing? Please say no.
-
I do not like how you can only use the bit driver with one handle fully extended or at a 90 degree angle.
Isn't that how all the bit drivers work? To much reach or leverage for your tastes?
Let me be more clear. You cannot deploy the bit driver and then close the handle to get a good grip. Reach is good. Turning a tough screw with a skinny little awkward off center handle is not.
Pertaining to the clip thing. Its not a tip up thing. Since I always carry a folder in my right pocket the skeletool would have to be carried in my left pocket. Which would be perfect as the blade would be against the seam, but with the clip being on the wrong handle their is a gap that causes the tool to move, bunch up the pocket, and just be uncomfortable. The clip needs to be close to the seam. Not away from it and with the heft of the Skeletool it makes it even worse.
With the clip retention I am very particular about having extremely tight clips. I have never found a clip to be to tight. Just the nature of the smooth metal clip being against another smooth metal surface the clip could most likely never be tight enough to be good for me.
-
ST 300 EOD I got as ~$30 worth of trade...love it!
(https://farm8.staticflickr.com/7528/15529509844_a31ce07a22_b_d.jpg)
What a beauty ! 8)
-
ST 300 EOD I got as ~$30 worth of trade...love it!
(https://farm8.staticflickr.com/7528/15529509844_a31ce07a22_b_d.jpg)
Nice work babola! :drool:
-
Just picked up a REI red skeletool, a Coyote OHT and a ST300 in BO. It was a good Christmas.b :)
-
Just picked up a REI red skeletool, a Coyote OHT and a ST300 in BO. It was a good Christmas.b :)
I would say it was good indeed :tu:
-
Just picked up a Style CS in the sales. Like the scissors on the Micra but don't need all the extra tools, and like the form, simplicity and carabiner clip of the Style PS but rarely need the pliers so thought I'd try the CS instead. Seems good so far.
-
Leatherman Charge TTi, received this morning, already in love :)
I've bought it from a website which was selling the charge along with the 21-piece bit kit and a maglite solitaire (which basically came for free, my son says thanks ;)).
Strangely it didn't come with the usual extra bit which come with the charge (but having the 21-piece kit I'm not missing those).
One interesting fact: on the label outside the box you can read: "Charge TTI metric bits"
I wonder if the 21-piece kit also exists in metric form? or maybe it just contains both metrics and, how are they called... imperials? bits?
Anyway, now I've entered the leatherman club for real, I also own a Swisstool and a Squirt PS4, but the squirt is not in the same league as the other two.
What can I say... I haven't used it since I've received it this morning yet, but I've played with it a bit (ok: a LOT :)) and I find it very cool.
I cannot compare it yet to the Victorinox, other than for the fact that it's smaller and lighter. I will try to put it in use as I find an occasion.
Ciao,
Danilo
-
Congrats danilo :tu:
-
PST ll just arrived in the mail.
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/IMG_4298_zpsd3305f7a.jpg)
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/IMG_4299_zps0c692c08.jpg)
-
So you'd want the Wingman or Sidekick for left pocket carry. I find the Skele carries perfectly in the right hip pocket (I'm a lefty, so my writing implements are stored on my left side). Well into it's fourth year now, I still haven't lost the extra bit in my Skeletool, though I still think if it extracted the other way out of the tool it would be positively retained by the other handle. I actually prefer the bit driver arrangement on the Skele to other tools because there are fewer operations to bring it to bear; I've never had trouble using it. That's why you can't have my Skeletool, you'll have to get your own. :cheers:
In on topic news, I picked up a mostly-replacement tool I lost at the theme park. I own a Squirt Es4 now, and I have to say I really dig it. I can guarantee right now it won't replace my Style CS in EDC, but it'll live in my electronics box as practically the only tool I'll need for building, repair and hacking.
-
PST ll just arrived in the mail.
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/IMG_4298_zpsd3305f7a.jpg)
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/IMG_4299_zps0c692c08.jpg)
8) :tu: :)
-
a brand new Sidekick ,PST, PST 2 and MICRA all with Original sheaths
I'am happy :)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/IMG_4875.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/IMG_4875.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/IMG_4877.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/IMG_4877.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/6ef0cc66-750e-44e1-a68e-2ee52a1a4ce6.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/6ef0cc66-750e-44e1-a68e-2ee52a1a4ce6.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/IMG_4882.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/IMG_4882.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/IMG_4885.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/IMG_4885.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/IMG_4881.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/IMG_4881.jpg.html)
-
Nice haul!
Nate
-
Very nice ! MDC85
-
a brand new Sidekick ,PST, PST 2 and MICRA all with Original sheaths
I'am happy :)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/IMG_4875.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/IMG_4875.jpg.html)
Yeah you think?
Nice score.
-
a brand new Sidekick ,PST, PST 2 and MICRA all with Original sheaths
I'am happy :)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/IMG_4875.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/IMG_4875.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/IMG_4877.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/IMG_4877.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/6ef0cc66-750e-44e1-a68e-2ee52a1a4ce6.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/6ef0cc66-750e-44e1-a68e-2ee52a1a4ce6.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/IMG_4882.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/IMG_4882.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/IMG_4885.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/IMG_4885.jpg.html)
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/IMG_4881.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/IMG_4881.jpg.html)
Wow that´s an instant collection you´v got there.
Very nice score.
-
An old PST :D
-
A new toy for my son :D
(http://s18.postimg.org/yruecmdo9/Leatherman_LEAP_blue_15_Kopiowanie.jpg) (http://postimage.org/)
Leatherman Leap
-
Is that the new one or the one that got recalled?
If new one, do you see any differences?
-
Is that the new one or the one that got recalled?
If new one, do you see any differences?
lol, enki beat me too it again. :D
it's worth knowing that the leap was recalled: http://forum.multitool.org/index.php/topic,55864.0.html read page 3 for our extensive testing. :)
-
An old PST :D
:tu:
-
Wingman. Stays with me at work. Great tool.
-
Is that the new one or the one that got recalled?
If new one, do you see any differences?
My LEAP is stamped 0614 date of manufacture. I was not in the hands of the old model so I can not compare.
-
Is that the new one or the one that got recalled?
If new one, do you see any differences?
My LEAP is stamped 0614 date of manufacture. I was not in the hands of the old model so I can not compare.
check the back of the knife blade. the original Leap has 4 small ridges/bumps on the back of the knife blade, the newer version has 3.
-
It's next to impossible that anyone got one of the ones that was shipped before the recall. They only made it as far as the vendors before Leatherman recalled them.
Picked this up yesterday to replace the standard climbing carabiner I've had on my keys since high school. I've actually already used the screwdriver blade and the wrench. And it's lighter!
(https://lh5.googleusercontent.com/-6T0giklCS2I/VLNPdNDbrGI/AAAAAAAAC0k/Ka0R6izF8j0/s563-no/10906106_10205047041409252_5357957888463759561_n.jpg)
-
It's next to impossible that anyone got one of the ones that was shipped before the recall. They only made it as far as the vendors before Leatherman recalled them.
I got 2 of them... direct from the LM retail store. :D
-
Well that's just crazy!
-
check the back of the knife blade. the original Leap has 4 small ridges/bumps on the back of the knife blade, the newer version has 3.
Thank you for the information. My LEAP has 3, so the new version.
-
Mailman was fast, and brought me new BO Surge from mr. Kampfer. Thank you for help.
Here it is being cleaned for the first time. I was surprised how much BO came off. Literally my hands were black of it.
(http://tapatalk.imageshack.com/v2/15/01/13/7053e48670d9922f451fdd524e8e37b9.jpg)
-
Nice Surge :tu:
-
a brand new Rebar, but how do i take it apart?
It is to upgrade my charge :D
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/F22F6376-DBF4-4E02-91CB-8D34003AAB81.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/F22F6376-DBF4-4E02-91CB-8D34003AAB81.jpg.html)
-
Mailman was fast, and brought me new BO Surge from mr. Kampfer. Thank you for help.
Here it is being cleaned for the first time. I was surprised how much BO came off. Literally my hands were black of it.
(http://tapatalk.imageshack.com/v2/15/01/13/7053e48670d9922f451fdd524e8e37b9.jpg)
:multi:
-
a brand new Rebar, but how do i take it apart?
It is to upgrade my charge :D
(http://i992.photobucket.com/albums/af47/MDC85/Leatherman/F22F6376-DBF4-4E02-91CB-8D34003AAB81.jpg) (http://s992.photobucket.com/user/MDC85/media/Leatherman/F22F6376-DBF4-4E02-91CB-8D34003AAB81.jpg.html)
there's some useful info in the Mod Squad... there are several different ways you can disassemble it, but maybe start with this thread (http://forum.multitool.org/index.php/topic,56841.0.html)? there are also plenty of threads to help you out when you're putting the tools back together (http://forum.multitool.org/index.php/topic,56928.0.html). ;)
good luck, and keep us updated (preferably with more pics!) :D
-
Got my Charge AL in :D they sent me a refurbished one and even transferred my pocket clip over to the new (to me) one!
This thing is very tough to open at first! Definetly needs some breaking in!
-
This thing is very tough to open at first! Definetly needs some breaking in!
I can help with that just send it to me. :whistle:
-
Got a used Juice S2 on the bay but it's not in as nice a shape as I had hoped. Everything feels a bit stiff & grimey. Hopefully a good clean will do the trick.
Still missing my Wingman.... =[
-
Got a new Leatherman OHT today.
(http://parnass.com/images/leatherman-oht1.jpg)
-
Received my first Wave a few days ago! Hot tool with an ergonomic grip! (uhm, that sounds weird... :think:)
-
Got a new Leatherman OHT today.
(http://parnass.com/images/leatherman-oht1.jpg)
Oh man they look good. I might have to get me one of them.
-
Received my first Wave a few days ago! Hot tool with an ergonomic grip! (uhm, that sounds weird... :think:)
Sounds like what the ladies tell me all the time. :whistle:
-
Received my first Wave a few days ago! Hot tool with an ergonomic grip! (uhm, that sounds weird... :think:)
Sounds like what the ladies tell me all the time. :whistle:
That's odd, for ladies the smaller the tool the better the grip
-
Received my first Wave a few days ago! Hot tool with an ergonomic grip! (uhm, that sounds weird... :think:)
Sounds like what the ladies tell me all the time. :whistle:
Don't they usually leave out the "hot" part and just say tool?
:)
Nate
-
My ST300 should be here tomorrow.
-
Received my first Wave a few days ago! Hot tool with an ergonomic grip! (uhm, that sounds weird... :think:)
Sounds like what the ladies tell me all the time. :whistle:
That's odd, for ladies the smaller the tool the better the grip
:rofl:
-
Received my first Wave a few days ago! Hot tool with an ergonomic grip! (uhm, that sounds weird... :think:)
Sounds like what the ladies tell me all the time. :whistle:
Don't they usually leave out the "hot" part and just say tool?
:)
Nate
Nope. :tu:
-
My ST300 arrived from Rex today! :mail: :woohoo: I love it already!!
-
I think I'm gonna buy another Blast. I really miss that tool.
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Think Rebar with a comfortable grip
-
My ST300 arrived from Rex today! :mail: :woohoo: I love it already!!
The ST300 is one of my all-time favorites :tu:.
At first I thought I liked it so much because it's the grandchild of the original Supertool, which was the first multitool I bought (21 years ago), but soon I discovered that it's just because it's one of the best Leatherman tools out there (my humble opinion ;)). I like my new Surge very much, but I still like my ST300 a bit more ;).
P.S. You know I need to see some pics of your ST300, right ? :pok:
-
My ST300 arrived from Rex today! :mail: :woohoo: I love it already!!
The ST300 is one of my all-time favorites :tu:.
At first I thought I liked it so much because it's the grandchild of the original Supertool, which was the first multitool I bought (21 years ago), but soon I discovered that it's just because it's one of the best Leatherman tools out there (my humble opinion ;)). I like my new Surge very much, but I still like my ST300 a bit more ;).
P.S. You know I need to see some pics of your ST300, right ? :pok:
I think this will become one of my favourites as well. :tu: I love my ST200, but this just has that extra little beef, and the MUCH better lock release! The bigger cutters are also a huge plus for me. I usually use an MT when doing wiring on the Jeep, and when cutting heavier wire, most have a really hard time with that. I think this will be able to handle it much better than the others. :tu:
Pics eh? I just might be able to manage that. :D
-
A couple of quick pics.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/20150116_075100.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/20150116_075100.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/20150116_075029.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/20150116_075029.jpg.html)
-
Nice pics. I do like the looks of those ST300s. I am gonna have to get one someday and try it out.
Nate
-
Great pics mate :tu:.
I've said it before, the classic look Leatherman tools (Supertools, Rebar, PST, ...) and the Swisstool are the most photogenic tools out there.
Thanks for the pics :salute:.
-
Nice pics. I do like the looks of those ST300s. I am gonna have to get one someday and try it out.
Nate
Thanks Nate! :cheers: I think you'd really like one. :pok: :D
Great pics mate :tu:.
I've said it before, the classic look Leatherman tools (Supertools, Rebar, PST, ...) and the Swisstool are the most photogenic tools out there.
Thanks for the pics :salute:.
Thank Eric! :cheers: You're the king of photographing the ST300!! :tu: I can't wait to try and get some pics in the snow with the sun shining, and with my DSLR instead of my phone.
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Think Rebar with a comfortable grip
Plus scissors but with the stupid mini driver.
My ST300 arrived from Rex today! :mail: :woohoo: I love it already!!
The ST300 is one of my all-time favorites :tu:.
At first I thought I liked it so much because it's the grandchild of the original Supertool, which was the first multitool I bought (21 years ago), but soon I discovered that it's just because it's one of the best Leatherman tools out there (my humble opinion ;)). I like my new Surge very much, but I still like my ST300 a bit more ;).
P.S. You know I need to see some pics of your ST300, right ? :pok:
I think this will become one of my favourites as well. :tu: I love my ST200, but this just has that extra little beef, and the MUCH better lock release! The bigger cutters are also a huge plus for me. I usually use an MT when doing wiring on the Jeep, and when cutting heavier wire, most have a really hard time with that. I think this will be able to handle it much better than the others. :tu:
Pics eh? I just might be able to manage that. :D
ST 300 oh how I pine for thee.
A grown up sized Rebar you say? Sign me up.
-
Great pics mate :tu:.
I've said it before, the classic look Leatherman tools (Supertools, Rebar, PST, ...) and the Swisstool are the most photogenic tools out there.
Thanks for the pics :salute:.
Thank Eric! :cheers: You're the king of photographing the ST300!! :tu: I can't wait to try and get some pics in the snow with the sun shining, and with my DSLR instead of my phone.
Thanks for the kind words :salute:.
I'll be waiting here for those snow pics :popcorn:.
;)
-
A couple of quick pics.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/20150116_075100.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/20150116_075100.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/20150116_075029.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/20150116_075029.jpg.html)
Nice - love the Rebar! :tu:
-
Got a new Leatherman OHT today.
(http://parnass.com/images/leatherman-oht1.jpg)
Not bad tool, eh? ;)
I have had mine for about a year now and still reach for it more often than I originally thought.
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
Not hating on the Blast. It is the same form factor as the Rebar and as we all know that is a good thing.
Just was wondering what it was about it that made you like it more then say a Rebar.
I thought maybe you had issues with really loose eyeglasses or a lot of first grade craft projects to complete.
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
Nice buddy :tu: I sometimes miss mine as well, especially since it was my first MT.
-
A couple of quick pics.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/20150116_075100.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/20150116_075100.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/20150116_075029.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/20150116_075029.jpg.html)
Nice - love the Rebar! :tu:
I just noticed what you did there ... :wait:
This is a grown ups tool, not the "kiddy" version :pok:.
-
Hi everybody.
Just registered on this forum and have the New Surge coming in the mail.. Looking forward to add this tool to my already trusted original Super tool I bought in the army back in `96.
-
Hi everybody.
Just registered on this forum and have the New Surge coming in the mail.. Looking forward to add this tool to my already trusted original Super tool I bought in the army back in `96.
Welcome and congrats on the new Surge !!!
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
Nice buddy :tu: I sometimes miss mine as well, especially since it was my first MT.
Wait a minute ... are you saying that, sometime in the past, you sold your first MT ? :wait:
Or even worse, lost it ? :ahhh
Either way, you deserve a :twak:.
(In case you broke it and Leatherman replaced it by its successor, I stand corrected :whistle:).
-
Hi everybody.
Just registered on this forum and have the New Surge coming in the mail.. ...
Welcome aboard, sivrt.
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
Nice buddy :tu: I sometimes miss mine as well, especially since it was my first MT.
Wait a minute ... are you saying that, sometime in the past, you sold your first MT ? :wait:
Or even worse, lost it ? :ahhh
Either way, you deserve a :twak:.
(In case you broke it and Leatherman replaced it by its successor, I stand corrected :whistle:).
Yes, I sold it (to Cap I believe) as it was one I didn't carry much at the time. I know I deserve a team for it....
Sent from my XT901 using Tapatalk
-
Hi everybody.
Just registered on this forum and have the New Surge coming in the mail.. Looking forward to add this tool to my already trusted original Super tool I bought in the army back in `96.
Welcome :cheers:.
I also started with the original Supertool (back in '94), and I also just got myself a Surge, be it a BO version (Christmas gift from my wife :D), and both of them are great tools.
Let me give you one piece of advice, this forum is awesome, best online community on the net, but it's full with enablers. Before you know it you'll start buying the same tool in different colours/versions, try to get your hands on some of the classics (like the Leatherman PST, to name one), and it gets worse ... wait until you take a look at those Victorinox pocket knives ... and then you discover they also make plier-based tools ... and something called "alox" ...
And you should also check out the "flashlight forum" here ;).
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
Nice buddy :tu: I sometimes miss mine as well, especially since it was my first MT.
Wait a minute ... are you saying that, sometime in the past, you sold your first MT ? :wait:
Or even worse, lost it ? :ahhh
Either way, you deserve a :twak:.
(In case you broke it and Leatherman replaced it by its successor, I stand corrected :whistle:).
Yes, I sold it (to Cap I believe) as it was one I didn't carry much at the time. I know I deserve a team for it....
Sent from my XT901 using Tapatalk
Yes you did. I still have it in the exact same condition as you sold it to me (which was excellent) if I remember correctly. :think: I literally never used it. If I buy a New in Clamshell Blast in the future I will sell yours back to you. Its just like it took a little vacation. :D
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
Nice buddy :tu: I sometimes miss mine as well, especially since it was my first MT.
Wait a minute ... are you saying that, sometime in the past, you sold your first MT ? :wait:
Or even worse, lost it ? :ahhh
Either way, you deserve a :twak:.
(In case you broke it and Leatherman replaced it by its successor, I stand corrected :whistle:).
Yes, I sold it (to Cap I believe) as it was one I didn't carry much at the time. I know I deserve a team for it....
Sent from my XT901 using Tapatalk
At least it stayed in the MTO family ... ::)
So the Cap kind of adopted it ;).
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
Nice buddy :tu: I sometimes miss mine as well, especially since it was my first MT.
Wait a minute ... are you saying that, sometime in the past, you sold your first MT ? :wait:
Or even worse, lost it ? :ahhh
Either way, you deserve a :twak:.
(In case you broke it and Leatherman replaced it by its successor, I stand corrected :whistle:).
Yes, I sold it (to Cap I believe) as it was one I didn't carry much at the time. I know I deserve a team for it....
Sent from my XT901 using Tapatalk
Yes you did. I still have it in the exact same condition as you sold it to me (which was excellent) if I remember correctly. :think: I literally never used it. If I buy a New in Clamshell Blast in the future I will sell yours back to you. Its just like it took a little vacation. :D
Oh stop it you two, now I'm getting all mushy ... :cry:
-
Yeah, it stayed in the MTO family, and I wouldn't sell anywhere else. Cap, maybe I'll take you up on that offer someday;)
Sent from my XT901 using Tapatalk
-
Yeah, it stayed in the MTO family, and I wouldn't sell anywhere else. Cap, maybe I'll take you up on that offer someday;)
Sent from my XT901 using Tapatalk
:tu:
-
Hi everybody.
Just registered on this forum and have the New Surge coming in the mail.. Looking forward to add this tool to my already trusted original Super tool I bought in the army back in `96.
Welcome :cheers:.
I also started with the original Supertool (back in '94), and I also just got myself a Surge, be it a BO version (Christmas gift from my wife :D), and both of them are great tools.
Let me give you one piece of advice, this forum is awesome, best online community on the net, but it's full with enablers. Before you know it you'll start buying the same tool in different colours/versions, try to get your hands on some of the classics (like the Leatherman PST, to name one), and it gets worse ... wait until you take a look at those Victorinox pocket knives ... and then you discover they also make plier-based tools ... and something called "alox" ...
And you should also check out the "flashlight forum" here ;).
I know exactly what you mean. Multitools are very useful and in addition to that they are just fun to play with also. It is easy to get a little carried away. A Victorinox pocket knife was my first "multitool" as a very young boy. Don`t remember where I got it from but I had it on everywhere I went. Sadly it went missing a long time ago and I have missed it ever since.
The Super tool was a must in the army, way up north in Norway. Was always on the belt next to the Sami/Lappland knife with the 9" blade. Saved me a couple of times as well, fixing the stove in -40 degrees celcius..
-
Hi everybody.
Just registered on this forum and have the New Surge coming in the mail.. Looking forward to add this tool to my already trusted original Super tool I bought in the army back in `96.
Welcome :cheers:.
I also started with the original Supertool (back in '94), and I also just got myself a Surge, be it a BO version (Christmas gift from my wife :D), and both of them are great tools.
Let me give you one piece of advice, this forum is awesome, best online community on the net, but it's full with enablers. Before you know it you'll start buying the same tool in different colours/versions, try to get your hands on some of the classics (like the Leatherman PST, to name one), and it gets worse ... wait until you take a look at those Victorinox pocket knives ... and then you discover they also make plier-based tools ... and something called "alox" ...
And you should also check out the "flashlight forum" here ;).
I know exactly what you mean. Multitools are very useful and in addition to that they are just fun to play with also. It is easy to get a little carried away. A Victorinox pocket knife was my first "multitool" as a very young boy. Don`t remember where I got it from but I had it on everywhere I went. Sadly it went missing a long time ago and I have missed it ever since.
The Super tool was a must in the army, way up north in Norway. Was always on the belt next to the Sami/Lappland knife with the 9" blade. Saved me a couple of times as well, fixing the stove in -40 degrees celcius..
When your stove is not working when it's -40°c and you can fix it with your Supertool, I think you can indeed say that it saved your *ss :o.
P.S. When your Surge arrives ... we do like pics here, so if you have the possibility to take some pics (Surge and/or Supertool), go nuts :pok:.
-
Hi everybody.
Just registered on this forum and have the New Surge coming in the mail.. Looking forward to add this tool to my already trusted original Super tool I bought in the army back in `96.
Welcome :cheers:.
I also started with the original Supertool (back in '94), and I also just got myself a Surge, be it a BO version (Christmas gift from my wife :D), and both of them are great tools.
Let me give you one piece of advice, this forum is awesome, best online community on the net, but it's full with enablers. Before you know it you'll start buying the same tool in different colours/versions, try to get your hands on some of the classics (like the Leatherman PST, to name one), and it gets worse ... wait until you take a look at those Victorinox pocket knives ... and then you discover they also make plier-based tools ... and something called "alox" ...
And you should also check out the "flashlight forum" here ;).
I know exactly what you mean. Multitools are very useful and in addition to that they are just fun to play with also. It is easy to get a little carried away. A Victorinox pocket knife was my first "multitool" as a very young boy. Don`t remember where I got it from but I had it on everywhere I went. Sadly it went missing a long time ago and I have missed it ever since.
The Super tool was a must in the army, way up north in Norway. Was always on the belt next to the Sami/Lappland knife with the 9" blade. Saved me a couple of times as well, fixing the stove in -40 degrees celcius..
When your stove is not working when it's -40°c and you can fix it with your Supertool, I think you can indeed say that it saved your *ss :o.
P.S. When your Surge arrives ... we do like pics here, so if you have the possibility to take some pics (Surge and/or Supertool), go nuts :pok:.
I know.. Especially when you are in a tent and miles from anything that resembles civilisation. Pictures will come.
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
Nice buddy :tu: I sometimes miss mine as well, especially since it was my first MT.
Wait a minute ... are you saying that, sometime in the past, you sold your first MT ? :wait:
Or even worse, lost it ? :ahhh
Either way, you deserve a :twak:.
(In case you broke it and Leatherman replaced it by its successor, I stand corrected :whistle:).
Yes, I sold it (to Cap I believe) as it was one I didn't carry much at the time. I know I deserve a team for it....
Sent from my XT901 using Tapatalk
Yes you did. I still have it in the exact same condition as you sold it to me (which was excellent) if I remember correctly. :think: I literally never used it. If I buy a New in Clamshell Blast in the future I will sell yours back to you. Its just like it took a little vacation. :D
Oh stop it you two, now I'm getting all mushy ... :cry:
:drool:
Just imagine the blue stuff is puke.
-
:ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh
Cleanskin
(http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20150119_204630_zpspue3lfge.jpg)
-
:ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh
Cleanskin
Cool Tool :tu:
-
:ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh
Cleanskin
Cool Tool :tu:
+1 Very nice!
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
Not hating on the Blast. It is the same form factor as the Rebar and as we all know that is a good thing.
Just was wondering what it was about it that made you like it more then say a Rebar.
I thought maybe you had issues with really loose eyeglasses or a lot of first grade craft projects to complete.
Lol!
I actually wear glasses and i have always liked having an eyeglass screwdriver somewhere in my EDC so that one was never an issue for me.
I love the blast because i carried one for years. It was my choice because i really prefer the inboard tools on a multi, and the blast had scissors which are a requirement for me. I think i used my blast for everything i could find it worked for. It was a decent hammer, and fully extended i could reach door shutoff switches at work. Most things i used the blast for are universal but i just happened to use the blast so i like it.
Sent from my SM-G900V using Tapatalk
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
Not hating on the Blast. It is the same form factor as the Rebar and as we all know that is a good thing.
Just was wondering what it was about it that made you like it more then say a Rebar.
I thought maybe you had issues with really loose eyeglasses or a lot of first grade craft projects to complete.
Lol!
I actually wear glasses and i have always liked having an eyeglass screwdriver somewhere in my EDC so that one was never an issue for me.
I love the blast because i carried one for years. It was my choice because i really prefer the inboard tools on a multi, and the blast had scissors which are a requirement for me. I think i used my blast for everything i could find it worked for. It was a decent hammer, and fully extended i could reach door shutoff switches at work. Most things i used the blast for are universal but i just happened to use the blast so i like it.
Sent from my SM-G900V using Tapatalk
Good deal, glad you finally got another one.
Even if the Rebar is more better. :pok:
-
I think I'm gonna buy another Blast. I really miss that tool.
I see some love for the Blast around here.
Why?
Dude I carried a Blast for years and it's one of my all time favorites! I know it's not perfect but it's damn close for me. I just pulled the trigger on a new one off Ebay. Very excited.
Not hating on the Blast. It is the same form factor as the Rebar and as we all know that is a good thing.
Just was wondering what it was about it that made you like it more then say a Rebar.
I thought maybe you had issues with really loose eyeglasses or a lot of first grade craft projects to complete.
Lol!
I actually wear glasses and i have always liked having an eyeglass screwdriver somewhere in my EDC so that one was never an issue for me.
I love the blast because i carried one for years. It was my choice because i really prefer the inboard tools on a multi, and the blast had scissors which are a requirement for me. I think i used my blast for everything i could find it worked for. It was a decent hammer, and fully extended i could reach door shutoff switches at work. Most things i used the blast for are universal but i just happened to use the blast so i like it.
Sent from my SM-G900V using Tapatalk
Good deal, glad you finally got another one.
Even if the Rebar is more better. :pok:
I agree the Rebar is awesome. I'm gonna have a hard time choosing which one to carry.
-
Got a used Style CS in black off eBay. I knew they were small but didn't expect it to be quite so tiny. I struggle to deploy the blade as the nail nick is barely a scratch, can this be improved upon?
-
Got a used Style CS in black off eBay. I knew they were small but didn't expect it to be quite so tiny. I struggle to deploy the blade as the nail nick is barely a scratch, can this be improved upon?
Use a Dremel rotary tool fitted with a cutoff wheel to make your own nail nick like I did on a Gerber MP400:
Link: http://forum.multitool.org/index.php/topic,56568.msg1012109/topicseen.html#msg1012109
(http://parnass.com/images/gerber-mp400-2.jpg)
-
EOD all the way! :multi:
No Signal gimmicks here 8)
(https://farm8.staticflickr.com/7516/16118985187_e4c0e8ceba_b_d.jpg)
(https://farm8.staticflickr.com/7525/15682273624_01f3ccf3e5_b_d.jpg)
(https://farm8.staticflickr.com/7498/16278896936_491971e869_b_d.jpg)
-
Nice pics babola :tu:
-
Nice pics babola :tu:
Thanks Steve, appreciate it :tu:
-
Got a used Style CS in black off eBay. I knew they were small but didn't expect it to be quite so tiny. I struggle to deploy the blade as the nail nick is barely a scratch, can this be improved upon?
Use a Dremel rotary tool fitted with a cutoff wheel to make your own nail nick like I did on a Gerber MP400:
Cheers, sounds easy enough. Might try to add one further down the blade, stock one is really close to the pivot point which makes it even worse.
-
Leatherman Charge XTi Black
-
Leatherman Charge XTi Black
Nice. 8)
-
Just got a BO KICK for 24 bucks :D Needs a good cleaning though. (http://tapatalk.imageshack.com/v2/15/01/22/e6e64545c6cef8b752a16effc000f91e.jpg)(http://tapatalk.imageshack.com/v2/15/01/22/2ebe095798a1eeef08409f8a0f4ffe6d.jpg)
-
Leatherman Micra Orange
-
That Micra looks like a pretty handy tool.
-
My new one is an old wave, with the Pentax screw for 50€, not a very good deal (I was thinking buying a new wave...). Dunno how long I will keep it.
Will be with my tti and surge. And all the others ;)
Still need to buy a rebar.
-
Still need to buy a rebar.
Yes
-
Still need to buy a rebar.
Yes
Speaking of that, have you got a Surge yet Harley?
Nate
-
My new one is an old wave,
Still need to buy a rebar.
Agreed.
Buy a Rebar, scrap it for it´s plierhead, and add that to the Wave.
Mission accomplished. :tu:
-
Oh no. I m not putting new rebar pliers on an old wave. On a new or a charge OK, but on an old that's a shame!
-
Still need to buy a rebar.
Yes
Speaking of that, have you got a Surge yet Harley?
Nate
:twak:
My new one is an old wave,
Still need to buy a rebar.
Agreed.
Buy a Rebar, scrap it for it´s plierhead, and add that to the Wave.
Mission accomplished. :tu:
Approve this idea.
Already have a SS Rebar on the way to donate parts to my Wave.
-
Pics
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg.html)
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg.html)
wow..... Where did you get that? I wasn't even aware they did corporate stuff like Victorinox
Sent from my iPad using Tapatalk
-
Skeletool CX and old style Surge
(http://tapatalk.imageshack.com/v2/15/01/24/70dc268261ed267e07c82c40281877b1.jpg)
-
Pics
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg.html)
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg.html)
wow..... Where did you get that? I wasn't even aware they did corporate stuff like Victorinox
Sent from my iPad using Tapatalk
I traded my 87 year old boss a pst for it.
He got it new as a freebie from them.
He likes the pst better
More tools and no clip
-
I got a sweet Blast off Ebay the other day.
-
Pics
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg.html)
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg.html)
wow..... Where did you get that? I wasn't even aware they did corporate stuff like Victorinox
Sent from my iPad using Tapatalk
I traded my 87 year old boss a pst for it.
He got it new as a freebie from them.
He likes the pst better
More tools and no clip
Your boss seems like quite a character.
-
Pics
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg.html)
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg.html)
wow..... Where did you get that? I wasn't even aware they did corporate stuff like Victorinox
Sent from my iPad using Tapatalk
I traded my 87 year old boss a pst for it.
He got it new as a freebie from them.
He likes the pst better
More tools and no clip
Your boss seems like quite a character.
You have no idea.
He's only almost killed me once.
-
Skeletool CX and old style Surge
(http://tapatalk.imageshack.com/v2/15/01/24/70dc268261ed267e07c82c40281877b1.jpg)
Just noticed the machinist box photo bomb.
Pics
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg.html)
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg.html)
wow..... Where did you get that? I wasn't even aware they did corporate stuff like Victorinox
Sent from my iPad using Tapatalk
I traded my 87 year old boss a pst for it.
He got it new as a freebie from them.
He likes the pst better
More tools and no clip
Your boss seems like quite a character.
You have no idea.
He's only almost killed me once.
Just once?
-
Skeletool CX and old style Surge
(http://tapatalk.imageshack.com/v2/15/01/24/70dc268261ed267e07c82c40281877b1.jpg)
Just noticed the machinist box photo bomb.
Pics
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg.html)
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg.html)
wow..... Where did you get that? I wasn't even aware they did corporate stuff like Victorinox
Sent from my iPad using Tapatalk
I traded my 87 year old boss a pst for it.
He got it new as a freebie from them.
He likes the pst better
More tools and no clip
Your boss seems like quite a character.
You have no idea.
He's only almost killed me once.
Just once?
Hey Joel,I didn't know you worked for Harley :rofl:
-
just got these.
-
G'Day,
I got a OHT last week. So far I'm pretty impressed with it. The drivers are a little shorter that the other tools I'm used to, but I'll get used to that. It feels more sturdy than what it looks. I got the Molle XL sheath with it. Love the sheath, but far to big to carry it on the hip. So I made a leather one that is a snug fit.
Pics...
Cheers
Pete
-
just got these.
What are the new ones remplacing?
-
G'Day,
I got a OHT last week. So far I'm pretty impressed with it. ... Love the sheath, but far to big to carry it on the hip. So I made a leather one that is a snug fit.
Nice work on the OHT sheath, Pete. :tu:
-
G'Day,
I got a OHT last week. So far I'm pretty impressed with it. ... Love the sheath, but far to big to carry it on the hip. So I made a leather one that is a snug fit.
Nice work on the OHT sheath, Pete. :tu:
+1 :tu:
-
Looks like a good set! :)
Skeletool CX and old style Surge
(http://tapatalk.imageshack.com/v2/15/01/24/70dc268261ed267e07c82c40281877b1.jpg)
-
Looks like a good set! :)
Skeletool CX and old style Surge
(http://tapatalk.imageshack.com/v2/15/01/24/70dc268261ed267e07c82c40281877b1.jpg)
Really is a good set! CX now rides in my jacket pocket, and Surge lives in my Jeep.
-
96'-97' Micra Tight and super sharp scissors and knife.
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/IMG_4362_zpszw80zliq.jpg)(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/IMG_4364%202_zpsobo45itr.jpg)(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/IMG_4357_zpshwv8o0kx.jpg)(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/IMG_4355_zpsqyllm5cg.jpg)
-
96'-97' Micra Tight and super sharp scissors and knife.
Could be that I am cutting strings with one hand but my Wave scissors don't seem to be working so well.
What do you guys think about them?
-
The wave/charge scissors are touch and go. I had a wave and they worked great. But on my Charge, not so much.
Nate
-
The wave/charge scissors are touch and go. I had a wave and they worked great. But on my Charge, not so much.
Nate
Another reason why the Wave is better. :pok:
-
The wave/charge scissors are touch and go. I had a wave and they worked great. But on my Charge, not so much.
Nate
Another reason why the Wave is better. :pok:
they're the same scissors. :twak:
I have noticed some subtle differences on the scissors from the various Waves & Charges that I've taken apart, but I'm not sure if they would affect the functionality.
-
The wave/charge scissors are touch and go. I had a wave and they worked great. But on my Charge, not so much.
Nate
Another reason why the Wave is better. :pok:
they're the same scissors. :twak:
I have noticed some subtle differences on the scissors from the various Waves & Charges that I've taken apart, but I'm not sure if they would affect the functionality.
Matter can only occupy one space at a time.
-
The wave/charge scissors are touch and go. I had a wave and they worked great. But on my Charge, not so much.
Nate
Another reason why the Wave is better. :pok:
they're the same scissors. :twak:
I have noticed some subtle differences on the scissors from the various Waves & Charges that I've taken apart, but I'm not sure if they would affect the functionality.
Matter can only occupy one space at a time.
you get another :twak: for that. :P
-
Pics
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122546_zpsac293438.jpg.html)
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2014-09-06122438_zps4c3f7d91.jpg.html)
wow..... Where did you get that? I wasn't even aware they did corporate stuff like Victorinox
Sent from my iPad using Tapatalk
I traded my 87 year old boss a pst for it.
He got it new as a freebie from them.
He likes the pst better
More tools and no clip
Guess the old fella knows enough to make investments a priority. Good for him..... and nice score for you.
Sent from my iPad using Tapatalk
-
Brand new Rebar SS donor for my G2 Wave.
Sidekick that is already in pieces on my desk and hopefully at some point will be a PLSK.
-
Brand new Rebar SS donor for my G2 Wave.
Sidekick that is already in pieces on my desk and hopefully at some point will be a PLSK.
You too? :facepalm:
-
Brand new Rebar SS donor for my G2 Wave.
Sidekick that is already in pieces on my desk and hopefully at some point will be a PLSK.
You too? :facepalm:
Yeah my file sucks so either I got to find a better one of just invest more time.
-
The wave/charge scissors are touch and go. I had a wave and they worked great. But on my Charge, not so much.
Nate
Another reason why the Wave is better. :pok:
Surge has great scissors. :pok:
-
My new FU-BAR
(http://i20.photobucket.com/albums/b241/babola/LMFUBAR01_zpsca58e109.jpg)
(http://i20.photobucket.com/albums/b241/babola/LMFUBAR03_zps189af1a9.jpg)
-
Nice one babola :tu:
-
My new FU-BAR
(http://i20.photobucket.com/albums/b241/babola/LMFUBAR01_zpsca58e109.jpg)
(http://i20.photobucket.com/albums/b241/babola/LMFUBAR03_zps189af1a9.jpg)
I may have to make one of these, but you definitely have the rights to the name :)
-
Mini Tool
-
Mini Tool
Nice pick-up :tu: You don't see many New-In-Clamshell Minis these days.
-
2 new STs!!!! One says ST300. one Just Says Super tool and cabelas is lightly engraved. It's also EXTREMELY LOOSE. as in I can open it like a butterfly knife. And check out the sheath(http://tapatalk.imageshack.com/v2/15/01/30/45f49d04839e5029b7fdeeb722df0dbb.jpg)(http://tapatalk.imageshack.com/v2/15/01/30/9c1f742c22f0fbf2b3cf3de81a15ecd8.jpg)(http://tapatalk.imageshack.com/v2/15/01/30/02488e61f6861f57c44499cb96e2c35c.jpg)(http://tapatalk.imageshack.com/v2/15/01/30/252809674c6fd2e06d086a92dfe3777b.jpg)
-
Inside the newer ST300 sheath there is a sticker that says made in Mexico and 07/12.
-
Nice score Nklamerus.
Sent from my XT901 using Tapatalk
-
Got a PST2 today
-
Got a PST2 today
Nice one, I've been carrying mine for the last couple of days.... great MT :tu:
-
Got a PST2 today
Nice one, I've been carrying mine for the last couple of days.... great MT :tu:
I'm pretty excited about it. I traded it for a MAC XR1 ratchet. And this thing is in PERFECT condition. Other than no box/paperwork It's brand spanking new looking
-
Got a PST2 today
Nice one, I've been carrying mine for the last couple of days.... great MT :tu:
I'm pretty excited about it. I traded it for a MAC XR1 ratchet. And this thing is in PERFECT condition. Other than no box/paperwork It's brand spanking new looking
Very cool, I lucked out on mine on E-bay for $17 shipped and it also was in like new condition. Mine is an early one with leatherman tool on the side and old style drivers , no PST II stamp. Which is yours ?
-
Got a PST2 today
Nice one, I've been carrying mine for the last couple of days.... great MT :tu:
I'm pretty excited about it. I traded it for a MAC XR1 ratchet. And this thing is in PERFECT condition. Other than no box/paperwork It's brand spanking new looking
Very cool, I lucked out on mine on E-bay for $17 shipped and it also was in like new condition. Mine is an early one with leatherman tool on the side and old style drivers , no PST II stamp. Which is yours ?
Mine has the newer drivers. And is stamped PSTII
-
just got these.
What are the new ones remplacing?
replaced my orange juice.
it was broken.
the new one I got....the knife on the juice was sharped a lot and the blade is much shorter because of that.
kinda lame...but better than what I sent in.
i have quite a few of the old juice models. =)
-
My new Suppertool, carried all week after recieving it in a great deal from an MTo member :salute:
(http://i112.photobucket.com/albums/n184/sparky_415/2015/Picture%2001.02.15%20004.jpg) (http://s112.photobucket.com/user/sparky_415/media/2015/Picture%2001.02.15%20004.jpg.html)
-
My new Suppertool, carried all week after recieving it in a great deal from an MTo member :salute:
(http://i112.photobucket.com/albums/n184/sparky_415/2015/Picture%2001.02.15%20004.jpg) (http://s112.photobucket.com/user/sparky_415/media/2015/Picture%2001.02.15%20004.jpg.html)
Nice :tu:. How are you liking it so far?
-
My new Suppertool, carried all week after recieving it in a great deal from an MTo member :salute:
Sounds like something one would carry in the evenings. ;)
-
Thanks to a super awesome member here I now have an OHT to play with.
(https://farm8.staticflickr.com/7287/16247114649_9f16146030.jpg) (https://flic.kr/p/qKGH9n)
-
My new Suppertool, carried all week after recieving it in a great deal from an MTo member :salute:
(http://i112.photobucket.com/albums/n184/sparky_415/2015/Picture%2001.02.15%20004.jpg) (http://s112.photobucket.com/user/sparky_415/media/2015/Picture%2001.02.15%20004.jpg.html)
Nice :tu:. How are you liking it so far?
Very useful so far, cut up some plastic, leather and filed my nails :tu:
My new Suppertool, carried all week after recieving it in a great deal from an MTo member :salute:
Sounds like something one would carry in the evenings. ;)
:oops: too many P's and I forgot my 'i before e except after c' :-[
-
Thanks to a super awesome member here I now have an OHT to play with.
(https://farm8.staticflickr.com/7287/16247114649_9f16146030.jpg) (https://flic.kr/p/qKGH9n)
Nice !
What model Spydi is that ?
-
80's PST :tu:
-
Nice PST Aloha, and it looks like a saber blade :tu: (but I could be wrong :think:)
-
Thanks to a super awesome member here I now have an OHT to play with.
(https://farm8.staticflickr.com/7287/16247114649_9f16146030.jpg) (https://flic.kr/p/qKGH9n)
Nice !
What model Spydi is that ?
It is the Paramilitary 2. :tu:
-
Nice !
-
It is the Paramilitary 2. :tu:
I first read that as Parliamentary 2. Didn't quite sound right. Could make politics more interesting though if they carried these.
-
Nice PST Aloha, and it looks like a saber blade :tu: (but I could be wrong :think:)
You Sir are correct!
-
Nice PST Aloha, and it looks like a saber blade :tu: (but I could be wrong :think:)
You Sir are correct!
Nice. I like the saber blade style.
Sent from my XT901 using Tapatalk
-
Just got a bo st300
-
Just got a bo st300
Excellent. :tu:
-
I like it its my first heavy duty tool
-
I like it its my first heavy duty tool
:whistle:
-
I like it its my first heavy duty tool
:whistle:
Here we go... :facepalm:
-
Just received a new toy: a ST300 from a MTO member.
Quite a good piece of steel, i was wondering something bigger but in fact its a good form factor. Will be a good complement to my old surge.
-
Just received a Juice S2. I think it's an orange juice...
:whistle:
-
Just got a bo st300
:tu: The ST300 and Surge both look great in BO.
-
Just got a bo st300
:tu: The ST300 and Surge both look great in BO.
+1
(https://farm8.staticflickr.com/7516/16118985187_e4c0e8ceba_b_d.jpg)
(https://farm4.staticflickr.com/3860/15010761817_ae016b3f82_b_d.jpg)
-
+2
Nate
-
:tu: The every single Leatherman MT ever made look great in BO.
Fixed.
-
REV & Croc ;)
(http://s11.postimg.org/gmhrp7db7/P2076678_Kopiowanie.jpg) (http://postimage.org/)
-
REV & Croc ;)
We need more pics please. :pok:
-
REV & Croc ;)
(http://s11.postimg.org/gmhrp7db7/P2076678_Kopiowanie.jpg) (http://postimage.org/)
That was fast ! :o
yes, more pictures please.
-
Got another PST the other day. Sweet looking, good condition seems like new. A little hard to deploy as it is not"breaked in".
Came with a box and some paper. :)
-
Nice PST Mr. Biriyani :)
Sent from my XT901 using Tapatalk
-
We need more pics please. :pok:
I'm sorry, but I have just such a picture...
(http://s3.postimg.org/qjp3e95bn/P2076713_Kopiowanie.jpg) (http://postimage.org/)
-
Thank you u99. :cheers:
Sent from the land of the long white cloud.
-
New mut and leatherman pry bar
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg.html)
-
Got another PST the other day. Sweet looking, good condition seems like new. A little hard to deploy as it is not"breaked in".
Came with a box and some paper. :)
Sweet PST and great picture!
-
New mut and leatherman pry bar
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg.html)
Great work on the pry bar. I'm really digging that and wish I had one. :tu:
-
New mut and leatherman pry bar
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg.html)
Nice work on that scope wrench-cum-pry bar...what tool/method did you use to work on it? It's made of hardened tool steel extremely hard to work with. I tried modding mine but didn't get far :-[
-
New mut and leatherman pry bar
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg.html)
Nice work on that scope wrench-cum-pry bar...what tool/method did you use to work on it? It's made of hardened tool steel extremely hard to work with. I tried modding mine but didn't get far :-[
Thank You babola
It took a couple hours.
I cut the wrench parts off with a cut off wheel on a Dremel. I cut a little and dipped it in oil cut a little more dipped it again again and again until I got the wrench ends off. The rest I did with a sanding drum keeping it cool with oil , sandpaper and wet stones .
It is very hard to work with hardened steel. You got to take your time and not over heat it or it will get soft.
it took me along time to lean how to do right.
I'd grind out a few if I had more wrenches.
I like doing it now that I know what I'm doing.
Theres nothing mo frustrating than Running good knives / multitool, ect trying to do a mod .
I know :facepalm:
-
I'd grind out a few if I had more wrenches.
I like doing it now that I know what I'm doing.
If I come across a wrench or two I might take you up on that. :whistle:
-
New mut and leatherman pry bar
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg.html)
Nice work on that scope wrench-cum-pry bar...what tool/method did you use to work on it? It's made of hardened tool steel extremely hard to work with. I tried modding mine but didn't get far :-[
Thank You babola
It took a couple hours.
I cut the wrench parts off with a cut off wheel on a Dremel. I cut a little and dipped it in oil cut a little more dipped it again again and again until I got the wrench ends off. The rest I did with a sanding drum keeping it cool with oil , sandpaper and wet stones .
It is very hard to work with hardened steel. You got to take your time and not over heat it or it will get soft.
it took me along time to lean how to do right.
I'd grind out a few if I had more wrenches.
I like doing it now that I know what I'm doing.
Theres nothing mo frustrating than Running good knives / multitool, ect trying to do a mod .
I know :facepalm:
Thanks I thought that would be the case, I'll try the grinder wheel method when I get back to it, cheers! :tu:
-
Thnx guys. :)
Wow that prybar is beautiful ! Nice with the logo.
Which wrench is made from ?
-
Leatherman should make those and sell them, they would be a hit for sure!
-
Leatherman should make those and sell them, they would be a hit for sure!
They most certainly should and they most certainly would :tu:
-
Leatherman should make those and sell them, they would be a hit for sure!
They most certainly should and they most certainly would :tu:
But there's no snowboard/skateboard/surfer tool on it, they're gonna have to add a headphone storage spot or maybe market it as a grip tape scraper. :P :facepalm:
A simple pry bar doesn't seem to fit Leatherman's current agenda I'm afraid.
I wish they would make one like the one in this thread because I would buy it in a heartbeat. I actually almost googled it to see where I could buy one until I kept reading here.
-
Just got a new Charge Ti with all of the accessories. The date stamps are both 0404 so I was surprised to find it still in the box.
-
Thnx guys. :)
Wow that prybar is beautiful ! Nice with the logo.
Which wrench is made from ?
That would be the standard scope wrench that comes with the MUT package. You can order it as spare part too.
-
Just got a new Charge Ti with all of the accessories. The date stamps are both 0404 so I was surprised to find it still in the box.
Very nice find. :tu:
-
Thanks everyone for all the positive feedback.
Wait until I get some good pics of it.
i polished the sides and the grind to 1000 grit and it's silky smooth to the toch.
I'll make anyone 1 if they want me too. I got to ask for them to send a little something with there wrench to cover my time and materials.
It should take about a hour, 2 cutting disks, 1 piece of sandpaper. for me to make one nicer than this one now that I know what doing. Oh and a little flitz polish.
If do em for free but I got to buy material and tools
-
New mut and leatherman pry bar
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/20150208_001746_zps6qm9gqne.jpg.html)
Nice work on that scope wrench-cum-pry bar...what tool/method did you use to work on it? It's made of hardened tool steel extremely hard to work with. I tried modding mine but didn't get far :-[
Thank You babola
It took a couple hours.
I cut the wrench parts off with a cut off wheel on a Dremel. I cut a little and dipped it in oil cut a little more dipped it again again and again until I got the wrench ends off. The rest I did with a sanding drum keeping it cool with oil , sandpaper and wet stones .
It is very hard to work with hardened steel. You got to take your time and not over heat it or it will get soft.
it took me along time to lean how to do right.
I'd grind out a few if I had more wrenches.
I like doing it now that I know what I'm doing.
Theres nothing mo frustrating than Running good knives / multitool, ect trying to do a mod .
I know :facepalm:
Thanks I thought that would be the case, I'll try the grinder wheel method when I get back to it, cheers! :tu:
The hard part is going slow and keeping the steel cool.
-
I picked up the following in the last week and also did some mods:
The three amigos, Surge, Wave (did the mini surge mods) and a Charge TTI (did the Surcharge mods)
Also got a Skeletool Cx and Carter C33Tx.
-
I picked up the following in the last week and also did some mods:
The three amigos, Surge, Wave (did the mini surge mods) and a Charge TTI (did the Surcharge mods)
Also got a Skeletool Cx and Carter C33Tx.
Must be time for a blunt nose hack then eh. :pok:
-
Bought an original piranha this weekend at Cabela's
(http://tapatalk.imageshack.com/v2/15/02/10/e054079116a3f287ce36f241e9f4bb30.jpg)
Sent from my iPhone using Tapatalk
-
Nice!
Nate
-
A crowd favorite, the LM Mini. The blade is a bit wonky but this will make a good user once cleaned.
-
Pulse
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Pulse/IMG_4604_zpscnrw6jli.jpg)
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Pulse/IMG_4548_zpslonqn7f4.jpg)
-
A crowd favorite, the LM Mini. The blade is a bit wonky but this will make a good user once cleaned.
I don't know what this forum is coming too :rant: Do I have to do this all by myself? :rant:
Fine!
:ahhh :ahhh :ahhh MINI. :ahhh :ahhh :ahhh
:D
-
A crowd favorite, the LM Mini. The blade is a bit wonky but this will make a good user once cleaned.
I don't know what this forum is coming too :rant: Do I have to do this all by myself? :rant:
Fine!
:ahhh :ahhh :ahhh MINI. :ahhh :ahhh :ahhh
:D
Nice mini Aloha
:tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu: :tu:
:cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers: :cheers:
:D
-
:facepalm:
-
Very nice Mini .And that Pulse to. Two beautiful classics.
-
:ahhh :ahhh :ahhh :ahhh :ahhh PULSE!!! :ahhh :ahhh :ahhh :ahhh :ahhh
-
Thanks all. Its such a neat little tool. I'd love a BO one eventually.
-
I just got the cs4 I won from getahl.
It's in fantastic shape.
Thanks getahl.
I like it alot.
-
Got myself a Skeletool (well, it is in the mail). I never used to be a fan, but the design has grown on me over the years. Not sure if I'll keep the carabiner, might grind it off >:D
-
I think they look uggers without the carabiner.
-
Bought an original piranha this weekend at Cabela's
(http://tapatalk.imageshack.com/v2/15/02/10/e054079116a3f287ce36f241e9f4bb30.jpg)
Sent from my iPhone using Tapatalk
I need one of them :whistle:
-
I'm loving it.
Sent from my iPhone using Tapatalk
-
Pulse
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Pulse/IMG_4604_zpscnrw6jli.jpg)
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Pulse/IMG_4548_zpslonqn7f4.jpg)
That looks nice. It is one of the older ones I would like to get some time.
Nate
-
Thanks Nate !
I'm liking it so far and think it's a pretty cool tool. I don't know what all the fuss is about the locks, they work pretty smoothly on this one.
-
The Pulse is by far and away my favourite Leatherman MT. Saying that I've just gotten in a classic of my own, a Sideclip. :)
-
This Mini arrived today! Been after this one for some time now. An updated group shot of the Mini's later :D
-
Awesome BO Mini!
-
I just got the cs4 I won from getahl.
It's in fantastic shape.
Thanks getahl.
I like it alot.
Pic
(http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile%20Uploads/2015-02-17%2016.41.24_zpsc4kezx8s.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/Mobile%20Uploads/2015-02-17%2016.41.24_zpsc4kezx8s.jpg.html)
-
Nice BO Mini and Blue juice !
-
This Mini arrived today! Been after this one for some time now. An updated group shot of the Mini's later :D
I give it about one hour before Kirky comes to droll on the BO Mini goodness.
-
Hey. New to the forum so i will update my lm collection.
Lm micra - 0697
Lm minitool - 0100
Lm wave 25th anniversary edition - 0408
Lm new wave x2 - 0311 and 0114
Lm St 300 - 0313
Lm wingman - 0214
Lm sidekick - 0114
Lm singlekick
And soon i get my Lm Charge Slv giftpack :drool:
And pics will come soon :D
-
Welcome Stonewall, nice collection you have there !
-
Hey. New to the forum so i will update my lm collection.
Lm micra - 0697
Lm minitool - 0100
Lm wave 25th anniversary edition - 0408
Lm new wave x2 - 0311 and 0114
Lm St 300 - 0313
Lm wingman - 0214
Lm sidekick - 0114
Lm singlekick
And soon i get my Lm Charge Slv giftpack :drool:
And pics will come soon :D
Nice collection :salute:. Looking forward to the pictures!
-
Hey. New to the forum so i will update my lm collection.
Lm micra - 0697
Lm minitool - 0100
Lm wave 25th anniversary edition - 0408
Lm new wave x2 - 0311 and 0114
Lm St 300 - 0313
Lm wingman - 0214
Lm sidekick - 0114
Lm singlekick
And soon i get my Lm Charge Slv giftpack :drool:
And pics will come soon :D
Nice collection :salute:. Looking forward to the pictures!
Very nice collection :tu:
-
Hey. New to the forum so i will update my lm collection.
Lm micra - 0697
Lm minitool - 0100
Lm wave 25th anniversary edition - 0408
Lm new wave x2 - 0311 and 0114
Lm St 300 - 0313
Lm wingman - 0214
Lm sidekick - 0114
Lm singlekick
And soon i get my Lm Charge Slv giftpack :drool:
And pics will come soon :D
Welcome to MTO.
-
Found this funny little VolksWagen Minitool, dated 1998.
I like that they put the VW logo on the pliers.
You usually see the company logo's on the handles.
-
Now that's a sweet promo Mini, Carlo. :2tu:
Congrats on the score. :cheers:
-
Wow! That's a nice find, basilio! :cheers:
-
Nice :tu:
-
Another great find Carlo! :cheers:
-
I just got a new surge
-
I just got a new surge
Congrats ! pics ?
-
I just got a new surge
Congrats ! pics ?
here yah go :drool:
(http://img.photobucket.com/albums/v290/jmoffatt/20150220_165458_zpseeyfsmgx.jpg) (http://smg.photobucket.com/user/jmoffatt/media/20150220_165458_zpseeyfsmgx.jpg.html)
-
Haven't gotten one in awhile. Heading to the gun show tomorrow though!
-
Picked up a Fuse :D crap photo (http://tapatalk.imageshack.com/v2/15/02/21/37301e5bc658ea1c5c4027d77b27749e.jpg)
Can someone tell me what the sheath came with?(http://tapatalk.imageshack.com/v2/15/02/21/0b20f6ff06b56011636a258cab902d4f.jpg)
-
Not sure what originally came with that sheath, but its awesome. :tu:
-
Can someone tell me what the sheath came with?(http://tapatalk.imageshack.com/v2/15/02/21/0b20f6ff06b56011636a258cab902d4f.jpg)
Nice looking sheath :tu:
If you can tell us what the interior dimensions are (preferably in mm) we might be able to narrow it down a bit by comparing that with LM MT/knife sizes.
-
Can someone tell me what the sheath came with?(http://tapatalk.imageshack.com/v2/15/02/21/0b20f6ff06b56011636a258cab902d4f.jpg)
Nice looking sheath :tu:
If you can tell us what the interior dimensions are (preferably in mm) we might be able to narrow it down a bit by comparing that with LM MT/knife sizes.
I can tomorrow, I've got a PST and a kick in can try to slide in there. It's the locks that get stuck the worst
The sheath itself I love, pretty thick leather
-
Scored an original PST leather sheath with a BIN of $6 shipped on the ebay.
-
My Skeletool arrived yesterday. Very interesting piece of kit. In some ways, I'd have been happy for it to be slightly more weighty if I could have a few more tools, but still its pretty good.
MUCH smaller than I expected.
Will be a good pocket carry for when I go hiking etc.
-
My Skeletool arrived yesterday. Very interesting piece of kit. In some ways, I'd have been happy for it to be slightly more weighty if I could have a few more tools, but still its pretty good.
MUCH smaller than I expected.
Will be a good pocket carry for when I go hiking etc.
any pics?
-
My Skeletool arrived yesterday. Very interesting piece of kit. In some ways, I'd have been happy for it to be slightly more weighty if I could have a few more tools, but still its pretty good.
MUCH smaller than I expected.
Will be a good pocket carry for when I go hiking etc.
any pics?
Will post some pics this afternoon. I think a hike after work would be perfect anyway :cheers:
-
As promised
(http://i.imgur.com/b6QVRgd.jpg)
I'm interested to see if any non-Aussie can identify the plant ;)
-
As promised
(http://i.imgur.com/b6QVRgd.jpg)
I'm interested to see if any non-Aussie can identify the plant ;)
Awesome !!
-
I'm interested to see if any non-Aussie can identify the plant ;)
Old Man Banks? :think:
-
I might order a Style.........only 7 bucks
-
As promised
(http://i.imgur.com/b6QVRgd.jpg)
I'm interested to see if any non-Aussie can identify the plant ;)
Hairy nut plant :think:
-
I'm interested to see if any non-Aussie can identify the plant ;)
Old Man Banks? :think:
Close enough!
http://en.wikipedia.org/wiki/Banksia
Hmm, I can't seem to identify the sub-species though. Let's just call it Banksius Skeletoolis :D
-
The Pulse is by far and away my favourite Leatherman MT. Saying that I've just gotten in a classic of my own, a Sideclip. :)
Nice one Gareth! The sideclip is incredible. I carry mine sometimes. It's getting old, I've had it for 15 years and it's showing it's age. I hesitate to use it heavily anymore because I'd be devastated if it broke.
-
My 3 second hand s4s arrived. mostly good nick other than the scales. 2 for friends and one will be modded until unrecognisable >:D
-
My 3 second hand s4s arrived. mostly good nick other than the scales. 2 for friends and one will be modded until unrecognisable >:D
:popcorn:
-
Charge TTi with some little touch...
(http://i972.photobucket.com/albums/ae201/classicrock/rps20150226_225702_zpsuq7r21st.jpg) (http://s972.photobucket.com/user/classicrock/media/rps20150226_225702_zpsuq7r21st.jpg.html)
-
2 days in a row this is better than christmas! :ahhh
ss skeletool with pe blade from getahl's competition, great condition. Thanks again :cheers:
Truly a beautiful tool, looks like it was born to go with the bit extender.
-
I just opened a nip leatherman juice s2 I got as a gift from a friend and member.
Now I can retire my old orange juice s2.
It's special to me because I carried it on my wedding day.
Thanks Man.
I'm sure it will give me as many years of use as my old one did.
-
2 days in a row this is better than christmas! :ahhh
ss skeletool with pe blade from getahl's competition, great condition. Thanks again :cheers:
Truly a beautiful tool, looks like it was born to go with the bit extender.
That's a great idea. i knew you could use the bit driver with it but not while it was closed thanks a bunch.
-
Did anyone else hear about the cooperation Wrangler/Leatherman? i just found a german article:
http://www.instyle.de/instyle-men/exklusive-kooperation-wrangler-x-leatherman
The Rebar look nice :)
-
Did anyone else hear about the cooperation Wrangler/Leatherman? i just found a german article:
http://www.instyle.de/instyle-men/exklusive-kooperation-wrangler-x-leatherman
The Rebar look nice :)
Had not heard about that. I translated the page, but I could not understand how many will be produced or where they can be bought. I did find this link with pictures though.
http://www.hamishdinsdale.com/wrangler-x-leatherman/
-
Did anyone else hear about the cooperation Wrangler/Leatherman? i just found a german article:
http://www.instyle.de/ins...ion-wrangler-x-leatherman (http://www.instyle.de/instyle-men/exklusive-kooperation-wrangler-x-leatherman)
The Rebar look nice :)
Had not heard about that. I translated the page, but I could not understand how many will be produced or where they can be bought. I did find this link with pictures though.
http://www.hamishdinsdale...om/wrangler-x-leatherman/ (http://www.hamishdinsdale.com/wrangler-x-leatherman/)
They say 200 Rebar are produced - only for handpicked aficionados. Wrangler+ piranha 2 will be in wrangler stores and the online-shop of wrangler next week. Havn't seen anything else online yet. ???
-
A green Juice (these are a bit hard to find nowadays) :D
-
A green Juice (these are a bit hard to find nowadays) :D
A second one? Better condition?
-
A green Juice (these are a bit hard to find nowadays) :D
A second one? Better condition?
I wish :rofl:
No, this is my only one. It just arrived in Oz (last mention was in the "On the way" thread a while back - you have a sharp memory ;) )
-
A green Juice (these are a bit hard to find nowadays) :D
A second one? Better condition?
I wish :rofl:
No, this is my only one. It just arrived in Oz (last mention was in the "On the way" thread a while back - you have a sharp memory ;) )
That was a couple months back so I thought you already got that one. :D And I have a thing for Juices as you might have noticed so very few thing about them get passed me. ;)
-
A green Juice (these are a bit hard to find nowadays) :D
A second one? Better condition?
I wish :rofl:
No, this is my only one. It just arrived in Oz (last mention was in the "On the way" thread a while back - you have a sharp memory ;) )
That was a couple months back so I thought you already got that one. :D And I have a thing for Juices as you might have noticed so very few thing about them get passed me. ;)
I might have a pic of Greg's green Juice on my home computer. ;) I'll check later tonight.
-
New to the forum, first post! Just recently got my black oxide Rebar. Also have a Skeletool CX. Love them both. I'm addicted. Debating on getting either the Surge or Crunch next.
-
Welcome Jake!
Sent from my XT901 using Tapatalk
-
New to the forum, first post! Just recently got my black oxide Rebar. Also have a Skeletool CX. Love them both. I'm addicted. Debating on getting either the Surge or Crunch next.
Welcome and YES and YES to those great tools.
I picked up a Leap myself. It's neat and pretty small ( pictured with my SC ). As always with me it's formerly owned and was a great deal so I had to. It's the "new" one with the 3 ridges on the knife spine.
-
Welcome Jake ! good choice on the Rebar :tu:
-
Just got in a BO PST. 8) Got to say I'm loving the BO finish on this, almost too nice to use. Almost. ;)
-
Congrats on the BO PST Gareth :tu:
Just got this ST 200 this weekend
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_4738_zpshlelph6a.jpg)
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_4730_zps7huk1lpm.jpg)
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_4765_zpsjd8zbhhw.jpg)
-
This Mini arrived today! Been after this one for some time now. An updated group shot of the Mini's later :D
I give it about one hour before Kirky comes to droll on the BO Mini goodness.
Sorry to disappoint Herley,but I've been drooling over my own BO Mini ;)
-
This Mini arrived today! Been after this one for some time now. An updated group shot of the Mini's later :D
I give it about one hour before Kirky comes to droll on the BO Mini goodness.
Sorry to disappoint Herley,but I've been drooling over my own BO Mini ;)
That just sounds dirty.
-
I got two tools lately from a gentleman of this board.
First a bo Blast that I have wanted for some time. I always liked the bo tools but they are not that common and quite pricey where I live.
So I´m very glad my black fuelinegroup are complete. In my own opinion very cool looking. 8)
And then a ST300 EOD that i also been curious about since I do like the regular 300 so much.
It differs from the regular with partly serrated knife, small metal saw and with a shankholder that are different then that on the surge as it is on the inside.
And ofcourse the c4 punch. I don´t have any c4 to try but I´m sure that pointy thing will find it´s use.
I´ll guess I need a bo Core now. :P
Sorry for smurfing with the tones on pics.
-
New to the forum, first post! Just recently got my black oxide Rebar. Also have a Skeletool CX. Love them both. I'm addicted. Debating on getting either the Surge or Crunch next.
Not get the MTO memo?
Correct answer is always get both.
-
Nice collection Mr. B :tu:
-
Nice collection Mr. B :tu:
+1 Looking real nice. :tu:
-
Nice collection Mr. B :tu:
+1 Looking real nice. :tu:
Thanks guys :cheers: Got to admit `m pretty pleased.
-
So much for will power :facepalm:
Saw these on the bay a few days ago just couldn't resist!!
2x Original Waves with Original Brown Leather Sheaths
1x PST II
1x Micra
1x Juice S2
1x Juice CS4
Both juices show pocket carry wear, but the rest look to have never been used
-
So much for will power :facepalm:
Saw these on the bay a few days ago just couldn't resist!!
2x Original Waves with Original Brown Leather Sheaths
1x PST II
1x Micra
1x Juice S2
1x Juice CS4
That's quite a haul for someone who was supposed to be not collecting MTs any more (or am I mis-remembering again ? ) ;) :pok:
-
So much for will power :facepalm:
Saw these on the bay a few days ago just couldn't resist!!
2x Original Waves with Original Brown Leather Sheaths
1x PST II
1x Micra
1x Juice S2
1x Juice CS4
That's quite a haul for someone who was supposed to be not collecting MTs any more (or am I mis-remembering again ? ) ;) :pok:
Quite honestly Greg, I wasn't looking to buy I was simply bored. Spotted that it had just been listed and snapped it up. Afterwards I did ask myself "What the hell....?? :think:
But compared to 6 months ago my collecting is basically non-existent. However that LM shop display cabinet I got recently was one hell of a find :D it's fabulous! Came complete with a set of display cards in the back for several now discontinued LM's.
But apart from a Camo Surge, Charge ti and Juice SX plus a couple of Wengers (telescopic pointer) there is nothing I want.
Obviously if a bargain comes my way I'll grab it - old habit I suppose :angel:
EDIT: I did get something in the other day...
2 x clear LM polycarbonate QR holsters for the Juice series.
Never knew they existed until a week or so ago....Doh!
But they don't count do they?? :pok: ;)
-
Very nice haul, Nick. :cheers:
-
So much for will power :facepalm:
Saw these on the bay a few days ago just couldn't resist!!
2x Original Waves with Original Brown Leather Sheaths
1x PST II
1x Micra
1x Juice S2
1x Juice CS4
That's quite a haul for someone who was supposed to be not collecting MTs any more (or am I mis-remembering again ? ) ;) :pok:
Quite honestly Greg, I wasn't looking to buy I was simply bored. Spotted that it had just been listed and snapped it up. Afterwards I did ask myself "What the hell....?? :think:
But compared to 6 months ago my collecting is basically non-existent. However that LM shop display cabinet I got recently was one hell of a find :D it's fabulous! Came complete with a set of display cards in the back for several now discontinued LM's.
But apart from a Camo Surge, Charge ti and Juice SX plus a couple of Wengers (telescopic pointer) there is nothing I want.
Obviously if a bargain comes my way I'll grab it - old habit I suppose :angel:
EDIT: I did get something in the other day...
2 x clear LM polycarbonate QR holsters for the Juice series.
Never knew they existed until a week or so ago....Doh!
But they don't count do they?? :pok: ;)
I forgot all about the plastic juice sheaths. I got to try one.
How do you like it.
My latest is a Leatherman tool adaptor kit
(http://i1211.photobucket.com/albums/cc421/JAfromMn/20150311_134718_zpsubjpmgyw.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/20150311_134718_zpsubjpmgyw.jpg.html)
I also should have a st200 in the mail by next weekend.
-
Just ordered a Juice S2 in Storm Grey - should be here in 4 days.
It'll add to my collection of 9 Crunch and 5 Victorinox Signature Lite (yes, I know I have a problem)
Normal EDC is my modified (UK Legal) Crunch and a Signature Lite (for the pen and torch).
-
Very nice haul, Nick. :cheers:
Thanks enki :tu:
@JAfromMn
They're both sealed - I don't really want to open them :facepalm: (I got them to go with my juice collection)
However I did read that they're not very durable. It seems they're prone to breaking!!
-
So much for will power :facepalm:
Saw these on the bay a few days ago just couldn't resist!!
2x Original Waves with Original Brown Leather Sheaths
1x PST II
1x Micra
1x Juice S2
1x Juice CS4
Both juices show pocket carry wear, but the rest look to have never been used
Six tool at once that´s a haul. Very nice. :cheers:
-
St200
(http://i1211.photobucket.com/albums/cc421/JAfromMn/20150319_134719_zpspigr2mvc.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/20150319_134719_zpspigr2mvc.jpg.html)
Thanks Aloha007.
He found me a nice one.
-
St200
Thanks Aloha007.
He found me a nice one.
Welcome to the club Joel :tu:
BTW, It should fit in an Original ST sheath if you can find one. At least I'm pretty sure the one I got is an original ST Sheath.
-
St200
Thanks Aloha007.
He found me a nice one.
Eh
Welcome to the club Joel :tu:
BTW, It should fit in an Original ST sheath if you can find one. At least I'm pretty sure the one I got is an original ST Sheath.
I don't have one.
I don't think I have any extra sheaths that would fit.
Come to think of it I need a pst sheath too.
I might have to look on evilbay
-
St200
Thanks Aloha007.
He found me a nice one.
Eh
Welcome to the club Joel :tu:
BTW, It should fit in an Original ST sheath if you can find one. At least I'm pretty sure the one I got is an original ST Sheath.
I don't have one.
I don't think I have any extra sheaths that would fit.
Come to think of it I need a pst sheath too.
I might have to look on evilbay
What would a PST sheath go for now a days?
-
PST sheaths are going for anywhere from around $8 if you're lucky to $25 for Nos.
This guy has had them regularly for the last month or so
BIN $23 NOS
http://www.ebay.com/itm/VINTAGE-BROWN-LEATHERMAN-SHEATH-CASE-MULTI-TOOL-HOLDER/261804567870?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140602152332%26meid%3D7c05ea8604394433b2ecfa5f0aac96a3%26pid%3D100011%26rk%3D6%26rkt%3D10%26sd%3D251805970242
-
I think I have a few of those. Mine have never had the flap folded or buttoned though. As new as they come.
-
I think I have a few of those. Mine have never had the flap folded or buttoned though. As new as they come.
Why did I send sheaths with the tools I've traded :facepalm:
This is a cool pic of my two latest Leatherman's working together. .
(http://i1211.photobucket.com/albums/cc421/JAfromMn/20150319_160831_zpsjvyn0ibp.jpg) (http://s1211.photobucket.com/user/JAfromMn/media/20150319_160831_zpsjvyn0ibp.jpg.html)
-
Forgot this forum, just found my way back.
I have gotten a Juice S2 and a squirt ps4 since last visit. :tu:
-
Forgot this forum, just found my way back.
I have gotten a Juice S2 and a squirt ps4 since last visit. :tu:
Welcome back!!!
-
Welcome back EW :tu:
-
I finally got me a BO Wave NON CC.
-
I finally got me a BO Wave NON CC.
nice! :tu:
-
I finally got me a BO Wave NON CC.
nice! :tu:
+1 :tu:
-
I finally got me a BO Wave NON CC.
nice! :tu:
+1 :tu:
+2 :tu:
-
Sweet! Love the BO finish!
-
Sweet! Love the BO finish!
Pics please :pok:
-
Oh sorry, not me. I was posting about Aloha's Wave.
-
Crater C33 just arrived and a BO Rebar on the way.
Sent from my iPad using Tapatalk
-
OHT ON THE WAY. Thanks Captain!
-
OHT ON THE WAY. Thanks Captain!
Damn!!!! FOILED AGAIN
-
OHT ON THE WAY. Thanks Captain!
Damn!!!! FOILED AGAIN
Don't you some kind of "warm weather" dance you should be doing
-
OHT ON THE WAY. Thanks Captain!
Damn!!!! FOILED AGAIN
Don't you some kind of "warm weather" dance you should be doing
Sorry, too busy waiting at the airport for my flight to FLA. My fishing gear make it there yet?
-
OHT ON THE WAY. Thanks Captain!
Damn!!!! FOILED AGAIN
Don't you some kind of "warm weather" dance you should be doing
Sorry, too busy waiting at the airport for my flight to FLA. My fishing gear make it there yet?
Not yet! But I'll be sure to rig it up for ya!
I'll be sure to get you from the airport in my Duramax, I don't think a dodge would make it back
-
OHT ON THE WAY. Thanks Captain!
Damn!!!! FOILED AGAIN
Don't you some kind of "warm weather" dance you should be doing
Sorry, too busy waiting at the airport for my flight to FLA. My fishing gear make it there yet?
Not yet! But I'll be sure to rig it up for ya!
I'll be sure to get you from the airport in my Duramax, I don't think a dodge would make it back
What's that sound I hear? Sounds like a working starter to me!!! >:D. Easter weekend I'm heading up to the White Mountains to do a little fly fishing for Trout, gotta start rounding up my gear.
-
Crater C33 just arrived and a BO Rebar on the way.
Sent from my iPad using Tapatalk
::)
-
OHT ON THE WAY. Thanks Captain!
Damn!!!! FOILED AGAIN
Don't you some kind of "warm weather" dance you should be doing
Sorry, too busy waiting at the airport for my flight to FLA. My fishing gear make it there yet?
Not yet! But I'll be sure to rig it up for ya!
I'll be sure to get you from the airport in my Duramax, I don't think a dodge would make it back
What's that sound I hear? Sounds like a working starter to me!!! >:D. Easter weekend I'm heading up to the White Mountains to do a little fly fishing for Trout, gotta start rounding up my gear.
Watch out for Aliens....and BigFoot. I keep expecting to run into them every time I cross Apache lands.
Sent from my iPhone using Tapatalk
-
(http://tapatalk.imageshack.com/v2/15/03/27/a1458af0f64e74498d7400027d7fe515.jpg) AWWWWWW YEAAHHHHHHH. Cutlery shop sent me 2 dumb-dumbs too! (Lollipops)
-
Nice one NK! I do like the looks of the silver OHT.
Sent from my XT901 using Tapatalk
-
Agreed Monrogue! So glad I went with silver.
The funnest part is breaking it in!
My inner modder in my says to make a picket clip for it.......
-
Agreed Monrogue! So glad I went with silver.
The funnest part is breaking it in!
My inner modder in my says to make a picket clip for it.......
That would make it easier to carry, but mess up those silver and black good looks ;)
Sent from my XT901 using Tapatalk
-
Nice one NK. :tu:
-
Hi to everyone, this is my 1st post here, i'm glad to show you my brand new Wave
(http://i60.tinypic.com/23hqe0n.jpg)
But now some mod has comin'...
-
Welcome to the forum GC. :cheers:
-
Hi to everyone, this is my 1st post here, i'm glad to show you my brand new Wave
(http://i60.tinypic.com/23hqe0n.jpg)
But now some mod has comin'...
Nice ! Welcome
-
Thanks guys!
-
Welcome and congrats on your new Wave :tu:
-
Thanks Steve! :)
-
Welcome to the forum GC. Nice wave BTW.
Nate
-
(http://tapatalk.imageshack.com/v2/15/03/27/a1458af0f64e74498d7400027d7fe515.jpg) AWWWWWW YEAAHHHHHHH. Cutlery shop sent me 2 dumb-dumbs too! (Lollipops)
Nice! Cool pic too.
Nate
-
Love the Wave Guiseppe and welcome.
NK I see you finally got your OHT, how you liking it?
-
Thanks glad to be here ;)
@NK: Is that an original leatherman colour? I asked because i never see that
-
Thanks glad to be here ;)
@NK: Is that an original leatherman colour? I asked because i never see that
I think it is, they came out in black, tan and silver.
-
Another one just arrived and now ready for mod...
Tapatalk on Xperia Z2
-
Can't wait to see the outcome.
Nate
-
Can't wait to see the outcome.
Nate
+1 :tu:
-
First attempt... :facepalm:
It's more difficult than i thought.
The normal pliers to unscrew the Rebar are not good
I need some sh*t to unscrew that
Stay tuned ;)
-
First attempt... :facepalm:
It's more difficult than i thought.
The normal pliers to unscrew the Rebar are not good
I need some sh*t to unscrew that
Stay tuned ;)
Heat the screws to break the loctite. The tools end is keyed, only the saw and file sides unscrew.
-
First attempt... :facepalm:
It's more difficult than i thought.
The normal pliers to unscrew the Rebar are not good
I need some sh*t to unscrew that
Stay tuned ;)
Heat the screws to break the loctite. The tools end is keyed, only the saw and file sides unscrew.
Can i use the normal phono air?
-
First attempt... :facepalm:
It's more difficult than i thought.
The normal pliers to unscrew the Rebar are not good
I need some sh*t to unscrew that
Stay tuned ;)
Heat the screws to break the loctite. The tools end is keyed, only the saw and file sides unscrew.
Can i use the normal phono air?
Sorry I don't understand the question. Can you word it differently?
-
^^^ I think Giuseppe is referring to the hair blow dryer.
-
^^^ I think Giuseppe is referring to the hair blow dryer.
Oh okay then. A lighter (bic/zippo) will do it.
-
I can unscrew the head with the hair blow dryer (phono air ahahahha)
For the other screw i must ipen the tool ti do it or not?
This position is very smurf
Tapatalk on Xperia Z2
-
(http://tapatalk.imageshack.com/v2/15/03/30/f8c6fe5a0a5eeaeb769d487f8804c3f3.jpg)
Tapatalk on Xperia Z2
-
I can unscrew the head with the hair blow dryer (phono air ahahahha)
For the other screw i must ipen the tool ti do it or not?
This position is very smurf
Tapatalk on Xperia Z2
I would leave the tools closed and use lots of phono air. :tu:
-
Ok(http://tapatalk.imageshack.com/v2/15/03/30/ab8c19f330043a5589e11ba87ced2fe4.jpg)
Tapatalk on Xperia Z2
-
(http://tapatalk.imageshack.com/v2/15/03/30/d6f54c9b72ea153b6c7da214d39c1785.jpg)
Next...
Tapatalk on Xperia Z2
-
:popcorn:
-
As says Nacho Vidal "it's very hard baby"
Tapatalk on Xperia Z2
-
The second almost done
Next message when I have finish the work
Thanks guys and stay tuned ;)
(http://tapatalk.imageshack.com/v2/15/03/30/57142a5df8000bbae227fe0da26920b5.jpg)
Tapatalk on Xperia Z2
-
:popcorn: :tu:
-
Alignment goes wrong
Any suggestions?
(http://tapatalk.imageshack.com/v2/15/03/30/e7a051aa67b84894394064c7ecb889de.jpg)
Tapatalk on Xperia Z2
-
Did you put the spacers back in that go between the blades and frame?
Nate
-
Thanks glad to be here ;)
@NK: Is that an original leatherman colour? I asked because i never see that
I'm loving it. Still figuring out how to make the perfect clip. Also still waiting for a beach day photo shoot.
Ciclope the Silver did come out a little later than the Tan and Black scaled versions. I am not sure where or when exactly they came into production though
Love the Wave Guiseppe and welcome.
NK I see you finally got your OHT, how you liking it?
-
Did you put the spacers back in that go between the blades and frame?
Nate
yes i did
-
Did you put the spacers back in that go between the blades and frame?
Nate
yes i did
Try opening the outside tools then tighten the screws. Did the other side do that?
-
At the end i opened the tools and regulated the force...YESSSS!
There's only a little problem: when closed there's a little space of 2/3 mm between the hand... ???
For the moment i don't used any loctite.
BTW This is my RAVE (be soon a Mini Surge when i found the scissors)
(http://i57.tinypic.com/11uiwzl.jpg)
-
This part is where Zman, and some others can help you better. You will have to do some grinding. I believe the awl will need some grinding. And something else.
Nate
-
Exactly Nate!
The awl need to be grinded a little bit
Kampfer tell me to do that
BTW the Wave like this is amazing! :)
Tapatalk on Xperia Z2
-
At the end i opened the tools and regulated the force...YESSSS!
There's only a little problem: when closed there's a little space of 2/3 mm between the hand... ???
For the moment i don't used any loctite.
BTW This is my RAVE (be soon a Mini Surge when i found the scissors)
(http://i57.tinypic.com/11uiwzl.jpg)
so Shinning ?? My Precious !!!!!! :drool: :viking:
-
OHT ON THE WAY. Thanks Captain!
Damn!!!! FOILED AGAIN
Closest thing I could get to the beach for ya today! (http://tapatalk.imageshack.com/v2/15/03/30/3048ba711ff5cde55e2bc566988da32b.jpg)
-
(http://tapatalk.imageshack.com/v2/15/03/30/7455855a916d96ca6a48d56f251beb4f.jpg)
-
Sweet pic NK!
Sent from my XT901 using Tapatalk
-
Very romantic...
Nice pic NK
Tapatalk on Xperia Z2
-
Nice pic! Higgs will love that one.
Nate
-
Got my Supertool 200 today :). It needed a bath, but it's in great shape.
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150331_153525_089_zpscsudfggg.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150331_153525_089_zpscsudfggg.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150331_153631_015_zpspqimxf4w.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150331_153631_015_zpspqimxf4w.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150331_153737_501_zpshxohktsb.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150331_153737_501_zpshxohktsb.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150331_153831_323_zpsgv21urwr.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150331_153831_323_zpsgv21urwr.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150331_153906_558_zpsh0thzsfu.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150331_153906_558_zpsh0thzsfu.jpg.html)
Sent from my XT901 using Tapatalk
-
Very nice Monsy. :tu: And it's a USA head.
-
Nice looking ST200!
-
Thanks guys. Yeah, I like the USA head. It's dated 0701 on both handles.
Sent from my XT901 using Tapatalk
-
Nice ST200 M :tu: Did it come with a sheath ?
-
After grinded the awl now it's perfect!
(http://i62.tinypic.com/2419ueb.jpg)
(http://i57.tinypic.com/34f1c8k.jpg)
(http://i59.tinypic.com/nv6wpy.jpg)
Thanks all for suggestions ;)
-
Nice ST200 M :tu: Did it come with a sheath ?
Thanks Steve! It did, and it was the leather one, but it was ratty and in rough shape. I don't use sheaths anyway, so no big deal.
Sent from my XT901 using Tapatalk
-
@ GiuseppeCiclope, nice mod! Looks good.
@ Monrogue, congrats on the ST 200
Nate
-
Nice ST200 M :tu: Did it come with a sheath ?
Thanks Steve! It did, and it was the leather one, but it was ratty and in rough shape. I don't use sheaths anyway, so no big deal.
Sent from my XT901 using Tapatalk
Congrats, I hope you like it as much as I like mine !
-
@ GiuseppeCiclope, nice mod! Looks good.
@ Monrogue, congrats on the ST 200
Nate
Thanks Nate :)
Sent from my XT901 using Tapatalk
-
Nice ST200 M :tu: Did it come with a sheath ?
Thanks Steve! It did, and it was the leather one, but it was ratty and in rough shape. I don't use sheaths anyway, so no big deal.
Sent from my XT901 using Tapatalk
Congrats, I hope you like it as much as I like mine !
I do like it, but those locks take some getting used to. Other than that and some increase in bulk/weight, it's basically the same as my Supertool. I'm just trying to determine if the locking mechanism is worth the extra bulk/weight.
Sent from my XT901 using Tapatalk
-
Nice ST200 M :tu: Did it come with a sheath ?
Thanks Steve! It did, and it was the leather one, but it was ratty and in rough shape. I don't use sheaths anyway, so no big deal.
Sent from my XT901 using Tapatalk
Congrats, I hope you like it as much as I like mine !
I do like it, but those locks take some getting used to. Other than that and some increase in bulk/weight, it's basically the same as my Supertool. I'm just trying to determine if the locking mechanism is worth the extra bulk/weight.
Sent from my XT901 using Tapatalk
They do take just a bit to get used to.
-
Got the chance to buy a Crunch for 20 € and couldn´t resist it eventhough I already have one.
This one was much older from 0200 but like new.
Also got a bit kit for some older Lm:s from the same guy.
Maybe it´s no news but when comparing them I saw they have made some changes on the scales regarding to the logo and other printing.
My old(newer) one looks a little naked with nothing on one side.
Funny is with nothing to compare to I always been convinced that the blade on the Crunch was a little hawkblade-ish. Getting this one I realized it isn´t. It´s just my other that is if ever so slightly.
When using it it feels really like a hook.
-
Not exactly new or original, but I decided to put the plain edge blade into my Wingman and swap out the can opener for a serrated blade.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20and%20MT%201/DSC03893_zps8dkkecqy.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20and%20MT%201/DSC03893_zps8dkkecqy.jpg.html)
The plain edge went in very easily and does not have any play left/right or up/down.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20and%20MT%201/DSC03894_zpsfoo3bcxf.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20and%20MT%201/DSC03894_zpsfoo3bcxf.jpg.html)
The serrated blade went in easily as well and has good snap.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20and%20MT%201/DSC03896_zpslqtah9va.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20and%20MT%201/DSC03896_zpslqtah9va.jpg.html)
I was worried about the little nub on the blade to extract it, but it fit perfectly.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20and%20MT%201/DSC03898_zpsxuxrdcjs.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20and%20MT%201/DSC03898_zpsxuxrdcjs.jpg.html)
-
LM SuperTool 300 came just right today... leathersheath and a great tool... :)
(http://i1062.photobucket.com/albums/t489/kampfgockel2/IMG_4749_zpsq2izs3oj.jpg) (http://s1062.photobucket.com/user/kampfgockel2/media/IMG_4749_zpsq2izs3oj.jpg.html)
-
Not exactly new or original, but I decided to put the plain edge blade into my Wingman and swap out the can opener for a serrated blade.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20and%20MT%201/DSC03893_zps8dkkecqy.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20and%20MT%201/DSC03893_zps8dkkecqy.jpg.html)
Sweet looking mods Cappy.
-
Not exactly new or original, but I decided to put the plain edge blade into my Wingman and swap out the can opener for a serrated blade.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20and%20MT%201/DSC03893_zps8dkkecqy.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20and%20MT%201/DSC03893_zps8dkkecqy.jpg.html)
Sweet looking mods Cappy.
Thanks.
-
Not my latest LM, but LM-related!
Got a new nylon dress for my LM ST300 - the Small Black (Leather) One will getting use on weekends and holidays.
She´s a Big Lady :tu:
-
Yesterday I picked up a lightly used Surge (old model) with sheath for $20 at a pawn shop. Not a bad deal.
-
Yesterday I picked up a lightly used Surge (old model) with sheath for $20 at a pawn shop. Not a bad deal.
not bad , shealth alot , you can get under 10 bucks on ebay
-
Newest addition was my Wave this past Sunday... The clip came in today.
-
Newest addition was my Wave this past Sunday... The clip came in today.
You will love the clip I bet, use mine all the time.
-
Newest addition was my Wave this past Sunday... The clip came in today.
You will love the clip I bet, use mine all the time.
I love all the other clips on my other LMs and I'm so glad I have this now so I can rock it in the pocket. It does rock a little side to side... Think I can compress the top a bit to fit snugger?
-
Just got a Rebar this week and am loving it!
-
I just picked up a new Wave, bit cards, extension and belt clip to go in my new Skinth XL along with a few other necessary tools.
Carl
-
I just picked up a new Wave, bit cards, extension and belt clip to go in my new Skinth XL along with a few other necessary tools.
Carl
Welcome, that set up has proven itself time and time again for me.
-
Welcome, that set up has proven itself time and time again for me.
Thanks much for the welcome Aloha007. :)
I also just found my original 1985 Leatherman PST and a later Leatherman Super tool.
Carl
BTW, I really like your saying "Esse Quam Videri". Great words for sure.
-
Welcome to the forum, Carl. :waving:
-
Just got a Rebar this week and am loving it!
Rebar is a great choice and welcome aboard !
Welcome, that set up has proven itself time and time again for me.
Thanks much for the welcome Aloha007. :)
I also just found my original 1985 Leatherman PST and a later Leatherman Super tool.
Carl
BTW, I really like your saying "Esse Quam Videri". Great words for sure.
Welcome Carl !
-
Welcome to the forum Carl. :cheers:
-
I got a Wingman today, and also a C33 knife.
Both have laser engravings of companies that must returned them for whatever reason, and I got them for $5 each.
-
I got a Wingman today, and also a C33 knife.
Both have laser engravings of companies that must returned them for whatever reason, and I got them for $5 each.
Do you get to buy items sent back to LTG?
-
Not really, Leatherman does this thing every year on Earth Day where they sell tools like those listed above, old model LED Lenser flashlights, and whatever other types of odds and ends they have taking up space. We had about 4 cases of the Wingmans, and 3 of the C33s.
-
Not really, Leatherman does this thing every year on Earth Day where they sell tools like those listed above, old model LED Lenser flashlights, and whatever other types of odds and ends they have taking up space. We had about 4 cases of the Wingmans, and 3 of the C33s.
That sounds. AWESOME!!!!!!!!
-
Yeah, it was rad, I was able to get sheaths for all my tools.
-
Yeah, it was rad, I was able to get sheaths for all my tools.
That's 2 members in 2 days who work for LTG.
And both of yall sound like it's an excellent atmosphere!
What i wouldn't do to apply!
It's Portland I'm not in love with. (No Offense)
-
It's a pretty damn awesome company to work for.
-
I have a Pulse and OG Wave on the way :mail:
-
I have a Pulse and OG Wave on the way :mail:
Nice!
Sent from my XT901 using Tapatalk
-
I have a Pulse and OG Wave on the way :mail:
nice indeed !
-
I love old school Leathermans. The last LM I got was the OHT, and while it's a LOT fun to play with, it's just not something that I'd ever carry.
My first and only multi for the longest time was a PSTII so that's what I'm used to. Unfortunately she decided to take a swim in Lake Murray :facepalm: May she rest in peace
-
I love old school Leathermans. The last LM I got was the OHT, and while it's a LOT fun to play with, it's just not something that I'd ever carry.
My first and only multi for the longest time was a PSTII so that's what I'm used to. Unfortunately she decided to take a swim in Lake Murray :facepalm: May she rest in peace
Me too, The only new LM's I have are my Rebar and a Sidekick other than that they are a couple of PST's , PST II, , Micra, Pulse and a ST 200. I have been looking at OG Waves and OG ST's a lot recently. So many tools I covet and not enough cash :(
-
I love old school Leathermans. The last LM I got was the OHT, and while it's a LOT fun to play with, it's just not something that I'd ever carry.
My first and only multi for the longest time was a PSTII so that's what I'm used to. Unfortunately she decided to take a swim in Lake Murray :facepalm: May she rest in peace
Me too, The only new LM's I have are my Rebar and a Sidekick other than that they are a couple of PST's , PST II, , Micra, Pulse and a ST 200. I have been looking at OG Waves and OG ST's a lot recently. So many tools I covet and not enough cash :(
Maybe we should start playing the lottery... I do have a TTi that gets lots of carry time but still not sold on the bit driver.
-
I love old school Leathermans. The last LM I got was the OHT, and while it's a LOT fun to play with, it's just not something that I'd ever carry.
My first and only multi for the longest time was a PSTII so that's what I'm used to. Unfortunately she decided to take a swim in Lake Murray :facepalm: May she rest in peace
Me too, The only new LM's I have are my Rebar and a Sidekick other than that they are a couple of PST's , PST II, , Micra, Pulse and a ST 200. I have been looking at OG Waves and OG ST's a lot recently. So many tools I covet and not enough cash :(
Same for me. I love the old school LMs. I find the majority of the LMs I carry are retired models (G1 Wave, Supertool, Supertool 200, PST) with the only new LM being the Rebar, which itself is styled like a classic LM.
Sent from my XT901 using Tapatalk
-
Been chasing one down for a little while. They tend to command decent money but for my collection I wanted one on the cheap. The main blade looks like poo and the shield is loose but otherwise I'm happy.
-
Been chasing one down for a little while. They tend to command decent money but for my collection I wanted one on the cheap. The main blade looks like poo and the shield is loose but otherwise I'm happy.
How's it treating ya!?
Sent from my iPhone using Tapatalk
-
Been chasing one down for a little while. They tend to command decent money but for my collection I wanted one on the cheap. The main blade looks like poo and the shield is loose but otherwise I'm happy.
How's it treating ya!?
Sent from my iPhone using Tapatalk
While I'm sure it's a great tool much of my acquisitions are purely for collection purposes. I pretty much use my BO Wave, ST300, Surge, Swisstool, with an occasional Kick usage. I really dig my BO Wave and that has seen all the work recently.
-
Been chasing one down for a little while. They tend to command decent money but for my collection I wanted one on the cheap. The main blade looks like poo and the shield is loose but otherwise I'm happy.
How's it treating ya!?
Sent from my iPhone using Tapatalk
While I'm sure it's a great tool much of my acquisitions are purely for collection purposes. I pretty much use my BO Wave, ST300, Surge, Swisstool, with an occasional Kick usage. I really dig my BO Wave and that has seen all the work recently.
My BO Wave rides with me daily as well.
-
I was after a BO non Cap Crimper Wave for a bit. I seriously love this tool and don't see it loosing its spot anytime soon.
-
I was after a BO non Cap Crimper Wave for a bit. I seriously love this tool and don't see it loosing its spot anytime soon.
That's me... I love this tool. I have a SS one coming in tomorrow, we'll see how the two coexist haha.
-
Mail call today from Raptorman... One of three new acquisitions... Two of them are being sent to LM for a little extra TLC but no worries, I have my BO Wave to keep me company till they return... and this new beauty. A PST (or PST II ... not marked as so but the toolset is a II's I believe... Someone correct me if I'm wrong)
In any case, so glad I finally have a piece of older LM history... and it's already got some use today. :-)
(http://images.tapatalk-cdn.com/15/04/27/84a2fa5bfd101607a588394fc75910a9.jpg)
(http://images.tapatalk-cdn.com/15/04/27/3344b9095aefbab1a58e0568b28ef550.jpg)
(http://images.tapatalk-cdn.com/15/04/27/89c177b89c296ec0d10e1f5de3c41299.jpg)
-
Aah. These Pst 2:s sure are nice. :)
-
Aah. These Pst 2:s sure are nice. :)
I love handling it... Such a solid tool for nearly 20 years old!
-
Aah. These Pst 2:s sure are nice. :)
I love handling it... Such a solid tool for nearly 20 years old!
20 years?
So I wonder how old my PST I is then?
-
Aah. These Pst 2:s sure are nice. :)
I love handling it... Such a solid tool for nearly 20 years old!
20 years?
So I wonder how old my PST I is then?
Check the inside of your scales with your tools opened... There will be a four digit number... That is the month and year your LM was made.
-
Aah. These Pst 2:s sure are nice. :)
I love handling it... Such a solid tool for nearly 20 years old!
Nice Early PST II :tu:
-
Aah. These Pst 2:s sure are nice. :)
I love handling it... Such a solid tool for nearly 20 years old!
20 years?
So I wonder how old my PST I is then?
Check the inside of your scales with your tools opened... There will be a four digit number... That is the month and year your LM was made.
Yeah get with it Harley
Sak's rule !
-
Aah. These Pst 2:s sure are nice. :)
I love handling it... Such a solid tool for nearly 20 years old!
Nice Early PST II :tu:
Thanks Steve. So glad I was able to snatch it up! So interesting to know it's a PST II but not see that stamped on it.
-
Aah. These Pst 2:s sure are nice. :)
I love handling it... Such a solid tool for nearly 20 years old!
20 years?
So I wonder how old my PST I is then?
Check the inside of your scales with your tools opened... There will be a four digit number... That is the month and year your LM was made.
Yeah get with it Harley
Sak's rule !
Bah!
I was just testing you guys. Good job.
-
(http://s17.postimg.org/6xnbv3va7/P4297272_Kopiowanie.jpg) (http://postimage.org/)
LM Hybrid :D
-
Aah. These Pst 2:s sure are nice. :)
I love handling it... Such a solid tool for nearly 20 years old!
20 years?
So I wonder how old my PST I is then?
Check the inside of your scales with your tools opened... There will be a four digit number... That is the month and year your LM was made.
Yeah get with it Harley
Sak's rule !
Bah!
I was just testing you guys. Good job.
Awesome!
So how old is your PST, then, Harley? Now I'm curious :-)
-
Aah. These Pst 2:s sure are nice. :)
I love handling it... Such a solid tool for nearly 20 years old!
Nice Early PST II :tu:
Thanks Steve. So glad I was able to snatch it up! So interesting to know it's a PST II but not see that stamped on it.
Yes, On the early one's they were still using PST handles.
Here's mine
Dates 0996 and 0197
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/PST%20PST%20II/IMG_4299_zps0c692c08.jpg)
-
Aah. These Pst 2:s sure are nice. :)
I love handling it... Such a solid tool for nearly 20 years old!
Nice Early PST II :tu:
Thanks Steve. So glad I was able to snatch it up! So interesting to know it's a PST II but not see that stamped on it.
Yes, On the early one's they were still using PST handles.
Here's mine
Dates 0996 and 0197
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/PST%20PST%20II/IMG_4299_zps0c692c08.jpg)
Great set! Mine is a 96 as well.
-
(http://s17.postimg.org/6xnbv3va7/P4297272_Kopiowanie.jpg) (http://postimage.org/)
LM Hybrid :D
A hybrid. That´s cool 8).
Wish I had one.
Nice colour to.
-
02 dated pstll just in today :tu:
-
I just got a Supertool dated 1995. It's a real handful!! I'll post pics soon.
-
I just got a Supertool dated 1995. It's a real handful!! I'll post pics soon.
Excellent! Yes pics soon! Would love to see that.
-
I just got a Supertool dated 1995. It's a real handful!! I'll post pics soon.
Sweet :)
Sent from my XT901 using Tapatalk
-
(http://i.imgur.com/TF38NkH.jpg)
(http://s27.postimg.org/xo0vbp1rn/P5047335_Kopiowanie.jpg) (http://postimage.org/)
Leatherman Universal Tool Adapter
-
I started my collection recently. I already had the PST and Flair to begin with. The others were added the past few weeks. Now I need to explain to my wife my paypal bill :D
-
(http://i.imgur.com/TF38NkH.jpg)
(http://s27.postimg.org/xo0vbp1rn/P5047335_Kopiowanie.jpg) (http://postimage.org/)
Leatherman Universal Tool Adapter
I'll take it. You forgot to post the price you are selling it for though.
-
I started my collection recently. I already had the PST and Flair to begin with. The others were added the past few weeks. Now I need to explain to my wife my paypal bill :D
Looks like you are off to an excellent start :tu:
-
I started my collection recently. I already had the PST and Flair to begin with. The others were added the past few weeks. Now I need to explain to my wife my paypal bill :D
Nice :tu:
-
I started my collection recently. I already had the PST and Flair to begin with. The others were added the past few weeks. Now I need to explain to my wife my paypal bill :D
Looks like you are off to an excellent start :tu:
+1
Sent from my XT901 using Tapatalk
-
I started my collection recently. I already had the PST and Flair to begin with. The others were added the past few weeks. Now I need to explain to my wife my paypal bill :D
No need to explain just starting fixing stuff around the house ;)
Great looking collection :tu:
-
Added an SS Wave and a BO ST 300 to the fold tonight
(http://images.tapatalk-cdn.com/15/05/11/c268465d0a0b827884bf108795a9dc6b.jpg)
Bringing the family photo up to...
(http://images.tapatalk-cdn.com/15/05/11/e0e67f90972d1e82d99cd1d48050111c.jpg)
Sent from my iPhone using Tapatalk
-
I think you will love the Wave. Get a pocket clip for it, you can thank me later.
-
@Bayou
Looking good :tu:
-
@Bayou
Looking good :tu:
+1
-
Orange LM Juice S2. Original one not the new one. It's my new EDC for the office environment.
-
I think you will love the Wave. Get a pocket clip for it, you can thank me later.
Both of my Waves have the clips... It's the only way I rock them :-) I'm really wanting to find a way to get a clip on my ST300 and PSTII lol
Sent from my iPhone using Tapatalk
-
I think you will love the Wave. Get a pocket clip for it, you can thank me later.
Both of my Waves have the clips... It's the only way I rock them :-) I'm really wanting to find a way to get a clip on my ST300 and PSTII lol
Sent from my iPhone using Tapatalk
http://www.niteize.com/product/HipClip.asp
Check these out. There is a few different models that should work for you.
-
I think you will love the Wave. Get a pocket clip for it, you can thank me later.
Both of my Waves have the clips... It's the only way I rock them :-) I'm really wanting to find a way to get a clip on my ST300 and PSTII lol
Sent from my iPhone using Tapatalk
http://www.niteize.com/product/HipClip.asp (http://www.niteize.com/product/HipClip.asp)
Check these out. There is a few different models that should work for you.
Cap, I've actually looked at the nite ize clips... But sadly, my OCD will not allow me to put a silver clip on BO tool lol..... I suppose I could paint it lol
Sent from my iPhone using Tapatalk
-
I think you will love the Wave. Get a pocket clip for it, you can thank me later.
Both of my Waves have the clips... It's the only way I rock them :-) I'm really wanting to find a way to get a clip on my ST300 and PSTII lol
Sent from my iPhone using Tapatalk
http://www.niteize.com/product/HipClip.asp (http://www.niteize.com/product/HipClip.asp)
Check these out. There is a few different models that should work for you.
Cap, I've actually looked at the nite ize clips... But sadly, my OCD will not allow me to put a silver clip on BO tool lol..... I suppose I could paint it lol
Sent from my iPhone using Tapatalk
Understandable. I guess the search continues. :D
-
I think you will love the Wave. Get a pocket clip for it, you can thank me later.
Both of my Waves have the clips... It's the only way I rock them :-) I'm really wanting to find a way to get a clip on my ST300 and PSTII lol
Sent from my iPhone using Tapatalk
http://www.niteize.com/product/HipClip.asp (http://www.niteize.com/product/HipClip.asp)
Check these out. There is a few different models that should work for you.
Cap, I've actually looked at the nite ize clips... But sadly, my OCD will not allow me to put a silver clip on BO tool lol..... I suppose I could paint it lol
Sent from my iPhone using Tapatalk
Understandable. I guess the search continues. :D
The bummer is the other clip they offer which aactually is black, though really wide and plastic, used to be skinnier and metal.... Sadly, not now
Sent from my iPhone using Tapatalk
-
I think you will love the Wave. Get a pocket clip for it, you can thank me later.
Both of my Waves have the clips... It's the only way I rock them :-) I'm really wanting to find a way to get a clip on my ST300 and PSTII lol
Sent from my iPhone using Tapatalk
http://www.niteize.com/product/HipClip.asp (http://www.niteize.com/product/HipClip.asp)
Check these out. There is a few different models that should work for you.
Cap, I've actually looked at the nite ize clips... But sadly, my OCD will not allow me to put a silver clip on BO tool lol..... I suppose I could paint it lol
Sent from my iPhone using Tapatalk
Understandable. I guess the search continues. :D
The bummer is the other clip they offer which aactually is black, though really wide and plastic, used to be skinnier and metal.... Sadly, not now
Sent from my iPhone using Tapatalk
If you can drill and tap the clips Syph use would work I think. wThe oils have to get with him to see where he gets em.
(http://i70.photobucket.com/albums/i86/HarleyXJGuy/Mobile%20Uploads/IMG_3554.jpg~original)
-
Another rare'un: LM Juice S2 CAMO (brown)
I've been looking for a camo Juice for quite a while, so as soon as I saw this one I snapped it up like a starving gannet going after the last sardine in the sea ;)
-
What LM Juice S2 camo?? - I don't see one.
-
What LM Juice S2 camo?? - I don't see one.
Sorry, I don't do photos. But if your question is what is a camo LM Juice then here is some info and photos:
http://wiki.multitool.org/tiki-index.php?page=Camoflage+Juice+Tools
They are rare and quite hard to find these days.
-
Sorry, I don't do photos. But if your question is what is a camo LM Juice then here is some info and photos
Well I was just teasing....
But wow - How have you survived, or not even been expelled from MTo? ??? I thought photees were mandatory here :D
Anyway more important than seeing the Brown Camo S2 was discovering the Multitool Wiki - I never knew it existed until now - After being a member for nearly two years!! It's fab.
So thank you!!
-
Sorry, I don't do photos. But if your question is what is a camo LM Juice then here is some info and photos
Well I was just teasing....
But wow - How have you survived, or not even been expelled from MTo? ??? I thought photees were mandatory here :D
No problem :) And yes, I do get a bit of flack from time to time for not putting up photos, but I can live with that ;)
-
Just walked in the door with a new Surge!
REI had a sale and I couldn't resist.
-
Just walked in the door with a new Surge!
REI had a sale and I couldn't resist.
Excellent!!!!
Sent from my iPhone using Tapatalk
-
Nicely done Neko :tu:
-
Just walked in the door with a new Surge!
REI had a sale and I couldn't resist.
Nice one Neko! I´m using mine today also.
-
(http://images.tapatalk-cdn.com/15/05/16/360bfeeeb9738f352a2188365d5a97b6.jpg)(http://images.tapatalk-cdn.com/15/05/16/68d2a8650e633119c8f71d40d1fe295b.jpg)(http://images.tapatalk-cdn.com/15/05/16/473177f847674f548b34f25fcb57e023.jpg)
Just picked this sweet thang at a pawn shop for $15 bucks. #winning
-
(http://images.tapatalk-cdn.com/15/05/16/360bfeeeb9738f352a2188365d5a97b6.jpg)(http://images.tapatalk-cdn.com/15/05/16/68d2a8650e633119c8f71d40d1fe295b.jpg)(http://images.tapatalk-cdn.com/15/05/16/473177f847674f548b34f25fcb57e023.jpg)
Just picked this sweet thang at a pawn shop for $15 bucks. #winning
You, Sir, have good taste. Outstanding buy there :cheers:
-
Thanks Sawman! What era do you think its from? Early 90's? Late 80's? Thanks again
-
Thanks Sawman! What era do you think its from? Early 90's? Late 80's? Thanks again
Great score for $15, it looks to be in great shape.
Open it up and look for the date code, it will be inside of the back of the handle.
My guess is mid 90's
-
Nice buy and it looks great!
-
Just picked this sweet thang at a pawn shop for $15 bucks. #winning
Very nice, loving that price too. Wonder for long LM will honor their Warranty on the PST. They were discontinued in 2004, so it should be 2029 I guess.
-
Just picked this sweet thang at a pawn shop for $15 bucks. #winning
Very nice, loving that price too. Wonder for long LM will honor their Warranty on the PST. They were discontinued in 2004, so it should be 2029 I guess.
They are dated on the inside of the handle so they can tell when it was made and the warranty will apply accordingly. With that said I vaguely remember Tim Leatherman saying he would fix tools over 25 years old.
-
Just picked this sweet thang at a pawn shop for $15 bucks. #winning
Very nice, loving that price too. Wonder for long LM will honor their Warranty on the PST. They were discontinued in 2004, so it should be 2029 I guess.
They are dated on the inside of the handle so they can tell when it was made and the warranty will apply accordingly. With that said I vaguely remember Tim Leatherman saying he would fix tools over 25 years old.
That makes sense. Thanks! Would be interesting to know their strategy of stock piling retired models for warranty work. It would suck to get a retired model replaced with a newer model. But then again the general public would be happy thinking they got an upgrade.
-
Just picked this sweet thang at a pawn shop for $15 bucks. #winning
Very nice, loving that price too. Wonder for long LM will honor their Warranty on the PST. They were discontinued in 2004, so it should be 2029 I guess.
They are dated on the inside of the handle so they can tell when it was made and the warranty will apply accordingly. With that said I vaguely remember Tim Leatherman saying he would fix tools over 25 years old.
That makes sense. Thanks! Would be interesting to know their strategy of stock piling retired models for warranty work. It would suck to get a retired model replaced with a newer model. But then again the general public would be happy thinking they got an upgrade.
I don't think they have much of a strategy of stock piling old models. It seems that nowadays they rather just replace it with a new model. Its probably much more time efficient for their staff. I would hope they keep all the warranty returns that are discontinued for parts for people who do not want a replacement.
-
My new surge with the rest of the family. (http://images.tapatalk-cdn.com/15/05/21/9fe92455af9bfd848fa585458e9c0843.jpg)
-
(http://media2.giphy.com/media/IeLOBZb7ZdQ1G/giphy.gif)
-
A Leatherman I said I would never buy, and bought last fall. The Leatherman Pulse is the newest addition to the collection.
(http://i1056.photobucket.com/albums/t366/bennyp4036/CCB66C13-0402-4598-B208-77F6131022DD.png_zpslkwjy8dn.jpeg) (http://s1056.photobucket.com/user/bennyp4036/media/CCB66C13-0402-4598-B208-77F6131022DD.png_zpslkwjy8dn.jpeg.html)
(http://i1056.photobucket.com/albums/t366/bennyp4036/DDEBE4FA-2BE1-4A55-8401-AE26398F2C0F_zpsj737yoyo.jpg) (http://s1056.photobucket.com/user/bennyp4036/media/DDEBE4FA-2BE1-4A55-8401-AE26398F2C0F_zpsj737yoyo.jpg.html)
-
Nice Ben. How do you like it?
Sent from my XT901 using Tapatalk
-
Nice Ben. How do you like it?
Sent from my XT901 using Tapatalk
its a good retired user. Size and weight hit all the sweet spots for me.
-
Nice Ben. How do you like it?
Sent from my XT901 using Tapatalk
its a good retired user. Size and weight hit all the sweet spots for me.
That's cool. It's one MT I've considered off and on for quite a while, but have yet to pull the trigger.
Sent from my XT901 using Tapatalk
-
Nice Ben. How do you like it?
Sent from my XT901 using Tapatalk
its a good retired user. Size and weight hit all the sweet spots for me.
That's cool. It's one MT I've considered off and on for quite a while, but have yet to pull the trigger.
Sent from my XT901 using Tapatalk
Its in the PST vein so all is well. Held off on the purchase because the ST 200 I have still shreds my thumb while using the lock release. This pulse is pretty smooth in that department. That in itself makes it so much more enjoyable to use.
-
Nice Ben. How do you like it?
Sent from my XT901 using Tapatalk
its a good retired user. Size and weight hit all the sweet spots for me.
That's cool. It's one MT I've considered off and on for quite a while, but have yet to pull the trigger.
Sent from my XT901 using Tapatalk
Its in the PST vein so all is well. Held off on the purchase because the ST 200 I have still shreds my thumb while using the lock release. This pulse is pretty smooth in that department. That in itself makes it so much more enjoyable to use.
Yeah I recently got a ST200 and I'm not sure how I feel about those rocker locks. I like using them somewhat, but I don't like the looks and feel of them in that they take away from the sleekness of that classic LM style that I like. I know they're tools, and I use them, but I also like them even more if they're pleasing to the eyes ;)
Sent from my XT901 using Tapatalk
-
That's what I like about the PST. It has that look, smooth and sleek.
-
I agree totally with yous guys. The ascetics of the PST and original ST really strike a chord with me. Im giving Pulse a spin today to appreciate locking tools on a small Leatherman. The rocker locks do kill the Feng shui a bit but cant knock this cool little tool for that.
-
I really like locking tools....it sure makes life nice when you don't have to worry about something snapping shut on you!
-
I really like locking tools....it sure makes life nice when you don't have to worry about something snapping shut on you!
Yeah, they are a plus to have. Have had some mishaps before with non locking tools and most certainly will have more.
-
I picked up a super tool and a juice c2 within the last month.
-
I finally retired the leatherman kick and bought the wave and two days ago bought the rebar. It's nice to finally have replaceable cutters.
-
Went to pick up a Wingman the other day, on a nice sale....but out of stock :facepalm:
Still waiting on something nice and new and shiny to buy - horrible pricing in NZ!
-
Accidental score tonight while I strolled through my local Ross
(http://images.tapatalk-cdn.com/15/05/25/ea651f7d630df6a8a3058608dd864a27.jpg)
Sent from my iPhone using Tapatalk
-
Accidental score tonight while I strolled through my local Ross
(http://images.tapatalk-cdn.com/15/05/25/ea651f7d630df6a8a3058608dd864a27.jpg)
Sent from my iPhone using Tapatalk
Nice. I bought the same thing a few days ago. I would go back and check what they have in a month or two as if they still have them they will mark them down to probably $10-$15 for the pair.
-
Accidental score tonight while I strolled through my local Ross
(http://images.tapatalk-cdn.com/15/05/25/ea651f7d630df6a8a3058608dd864a27.jpg)
Sent from my iPhone using Tapatalk
Nice. I bought the same thing a few days ago. I would go back and check what they have in a month or two as if they still have them they will mark them down to probably $10-$15 for the pair.
Thanks for the tip. Too bad they don't have like a two pack on rebars or surges ;-)
Sent from my iPhone using Tapatalk
-
Accidental score tonight while I strolled through my local Ross
(http://images.tapatalk-cdn.com/15/05/25/ea651f7d630df6a8a3058608dd864a27.jpg)
Sent from my iPhone using Tapatalk
Nice. I bought the same thing a few days ago. I would go back and check what they have in a month or two as if they still have them they will mark them down to probably $10-$15 for the pair.
Thanks for the tip. Too bad they don't have like a two pack on rebars or surges ;-)
Sent from my iPhone using Tapatalk
I know right. :D
they did have some Juices a few months ago, but looks like those are gone.
-
Accidental score tonight while I strolled through my local Ross
(http://images.tapatalk-cdn.com/15/05/25/ea651f7d630df6a8a3058608dd864a27.jpg)
Sent from my iPhone using Tapatalk
Nice. I bought the same thing a few days ago. I would go back and check what they have in a month or two as if they still have them they will mark them down to probably $10-$15 for the pair.
Thanks for the tip. Too bad they don't have like a two pack on rebars or surges ;-)
Sent from my iPhone using Tapatalk
I know right. :D
they did have some Juices a few months ago, but looks like those are gone.
Oh MAN!!! Really!!? Been trying to score a juice! Maybe they'll turn up next month haha!
Sent from my iPhone using Tapatalk
-
Accidental score tonight while I strolled through my local Ross
(http://images.tapatalk-cdn.com/15/05/25/ea651f7d630df6a8a3058608dd864a27.jpg)
Sent from my iPhone using Tapatalk
Nice. I bought the same thing a few days ago. I would go back and check what they have in a month or two as if they still have them they will mark them down to probably $10-$15 for the pair.
Thanks for the tip. Too bad they don't have like a two pack on rebars or surges ;-)
Sent from my iPhone using Tapatalk
I know right. :D
they did have some Juices a few months ago, but looks like those are gone.
Oh MAN!!! Really!!? Been trying to score a juice! Maybe they'll turn up next month haha!
Sent from my iPhone using Tapatalk
Fingers crossed.
-
Accidental score tonight while I strolled through my local Ross
(http://images.tapatalk-cdn.com/15/05/25/ea651f7d630df6a8a3058608dd864a27.jpg)
Sent from my iPhone using Tapatalk
Nice. I bought the same thing a few days ago. I would go back and check what they have in a month or two as if they still have them they will mark them down to probably $10-$15 for the pair.
Thanks for the tip. Too bad they don't have like a two pack on rebars or surges ;-)
Sent from my iPhone using Tapatalk
I know right. :D
they did have some Juices a few months ago, but looks like those are gone.
Oh MAN!!! Really!!? Been trying to score a juice! Maybe they'll turn up next month haha!
Sent from my iPhone using Tapatalk
Fingers crossed.
Haha! I'll let you know.
Sent from my iPhone using Tapatalk
-
What model juice are you looking for?
-
What model juice are you looking for?
I had been wanting to get an S2 but don't have the spare change at the moment... You know, life's hard all around lol
Sent from my iPhone using Tapatalk
-
Here's my PST II :)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150529_130439_376_zpsyaaxsx48.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150529_130439_376_zpsyaaxsx48.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150529_130923_957_zpseegjrmuz.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150529_130923_957_zpseegjrmuz.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150529_130646_904_zpsa5tufian.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150529_130646_904_zpsa5tufian.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150529_131206_157_zpsqub1ogaa.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150529_131206_157_zpsqub1ogaa.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150529_131546_712_zpsrelandjr.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150529_131546_712_zpsrelandjr.jpg.html)
Sent from my XT901 using Tapatalk
-
Nice PST II , it looks to be in really good shape :tu:
-
That's probably my very favorite LM. I received my PST2 today and I know I'll catch a clubbing for this but it will not be a user. They're nearly impossible to find NIB and I don't intend on messing it up. It WILL however get plenty of fondling :drool:
What I tool...... I just can't say enough nice about it. If LM still produced these I swear their stock would double. Just... WOW... :D
:multi:
-
Nice PST II , it looks to be in really good shape :tu:
Thanks, it is indeed in good condition :tu: Looks like it wasn't really used for the most part. Only the pliers show signs of any real use, and they're still in great shape.
Sent from my XT901 using Tapatalk
-
That's probably my very favorite LM. I received my PST2 today and I know I'll catch a clubbing for this but it will not be a user. They're nearly impossible to find NIB and I don't intend on messing it up. It WILL however get plenty of fondling :drool:
What I tool...... I just can't say enough nice about it. If LM still produced these I swear their stock would double. Just... WOW... :D
:multi:
I won't club you buddy ;). It is one of the better LMs for me as well. You're the one that got me thinking about getting one after your latest carry combo discussion.
Sent from my XT901 using Tapatalk
-
Original Supertool arrived this afternoon. :tu: :tu: :tu:
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_5201_zpsd5raox5i.jpg)
-
Nice and shiny :tu:
Sent from my XT901 using Tapatalk
-
That's probably my very favorite LM. I received my PST2 today and I know I'll catch a clubbing for this but it will not be a user. They're nearly impossible to find NIB and I don't intend on messing it up. It WILL however get plenty of fondling :drool:
What I tool...... I just can't say enough nice about it. If LM still produced these I swear their stock would double. Just... WOW... :D
:multi:
I have one I recently acquired (older one, before they actually started stamping it as a "PSTII") and it will be a "looker" MT as well... From one PSTII owner to another, does the longbar for the scissors flop out on yours, or does it stay in pretty tight?
Sent from my iPhone using Tapatalk
-
That's probably my very favorite LM. I received my PST2 today and I know I'll catch a clubbing for this but it will not be a user. They're nearly impossible to find NIB and I don't intend on messing it up. It WILL however get plenty of fondling :drool:
What I tool...... I just can't say enough nice about it. If LM still produced these I swear their stock would double. Just... WOW... :D
:multi:
I have one I recently acquired (older one, before they actually started stamping it as a "PSTII") and it will be a "looker" MT as well... From one PSTII owner to another, does the longbar for the scissors flop out on yours, or does it stay in pretty tight?
Sent from my iPhone using Tapatalk
The scissors are a little loose IMO now that you mention it. I figured that's the way they were meant to be.
-
That's probably my very favorite LM. I received my PST2 today and I know I'll catch a clubbing for this but it will not be a user. They're nearly impossible to find NIB and I don't intend on messing it up. It WILL however get plenty of fondling :drool:
What I tool...... I just can't say enough nice about it. If LM still produced these I swear their stock would double. Just... WOW... :D
:multi:
I have one I recently acquired (older one, before they actually started stamping it as a "PSTII") and it will be a "looker" MT as well... From one PSTII owner to another, does the longbar for the scissors flop out on yours, or does it stay in pretty tight?
Sent from my iPhone using Tapatalk
The scissors are a little loose IMO now that you mention it. I figured that's the way they were meant to be.
I kind of figured that as well... Just wanted to ask someone else who owned one :-)
Sent from my iPhone using Tapatalk
-
Latest member to join the family... New in box. Even the box is mint!
They sure don't build them like they use to. This tool has no play anywhere, not even the handles. Totally rock solid.
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/image.jpg3_zpsarfq7vdu.jpg)
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/image.jpg1_zpsxfhc6fiu.jpg)
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/image.jpg1_zpsyu9p9ozx.jpg)
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/image.jpg4_zps8owwpltn.jpg)
CB
-
Very nice.
-
Sweet Sideslip :tu:
-
Very nice CB. I agree that the older LMs have a better feel of quality to them.
Sent from my XT901 using Tapatalk
-
Very nice CB. I agree that the older LMs have a better feel of quality to them.
Sent from my XT901 using Tapatalk
+1 - Although I've had pretty good luck with some recent Micra and Rebar purchases, the quality still doesnt match up to the good ole days.
-
Latest member to join the family... New in box. Even the box is mint!
They sure don't build them like they use to. This tool has no play anywhere, not even the handles. Totally rock solid.
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/image.jpg3_zpsarfq7vdu.jpg)
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/image.jpg1_zpsxfhc6fiu.jpg)
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/image.jpg1_zpsyu9p9ozx.jpg)
(http://i1304.photobucket.com/albums/s540/chinesebuffet888/image.jpg4_zps8owwpltn.jpg)
CB
BEAUTIFUL! Where'd you snag that!?
Sent from my iPhone using Tapatalk
-
That is a nice LT, congrats.
Mike
Sent from my SHIELD Tablet
-
I just got back from a flea marked. I picked up an original Wave with it's original leather sheath for $20. Very dirty with a few rust spots. It is soaking in soapy water right now. Should clean up nice.
-
I just got back from a flea marked. I picked up an original Wave with it's original leather sheath for $20. Very dirty with a few rust spots. It is soaking in soapy water right now. Should clean up nice.
Sweet score, the OG Wave is on my short list of what to get next :tu:
-
My father in law's EDC is a Sideclip....he loves it! He has a Supertool 200 that he keeps in his truck and had a PST for awhile, but won't leave home without that Sideclip.
-
Older Leatherman tools have a beautifully simplicity :)
-
I agree. I think that's why I like them so much.
-
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Blast/IMG_5235_zpso2ysktbe.jpg)
-
Nice pic Steve.....loved my Blast!
-
I was at a Lowes recently and they evidentally don't move a lot of multitools because they still had a BLAST in clam package. I don't remember the exact price but I think it was around $60. Perhaps that's why it's still there ???
-
I was at a Lowes recently and they evidentally don't move a lot of multitools because they still had a BLAST in clam package. I don't remember the exact price but I think it was around $60. Perhaps that's why it's still there ???
You would think they would clearance it out by now. :think:
Sometimes they clearance it and never mark the package though. I found a P4 in clamshell and it was market $25ish. They rung it up and it was like $9.
-
Latest additions. The famous or infamous thumb-buster duo.
-
Nice score!
Nate
That's us mobile
-
Nice score indeed :tu:
-
+1 on that....great grab!
-
+1 very nice duo :tu:
-
Because of a generous offer from Etherealicer, one LM Micra has now come into my possession :salute:
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/20150608_204156.jpg)
First impressions, holy smurf it's so tiny.... second impressions, those scissors are wicked sharp :D
-
I just got a squirt s4 in the mail today. It is a nice little tool and the scissors seem very durable. The scales are "inferno red" but they look more pink to me, so I gave it to my wife for her keychain
-
(http://images.tapatalk-cdn.com/15/06/08/462a46ca98f3c2ad461c0ea3d816f59f.jpg)
-
Nice
Nate
That's us mobile
-
Two Juice
-
Nice ones
Nate
That's us mobile
-
Rebar, shown with an ST 300
-
Two Juice
Excellent score! Where'd you get those?
Sent from my iPhone using Tapatalk
-
Two Juice
Excellent score! Where'd you get those?
Ebay, exchange, etc...
-
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/97944ea1-0e89-4299-82c4-782ee818db0a_zpslkxk16fr.jpg)
-
Great shot of your BO ST Steve!!!
-
Great shot of your BO ST Steve!!!
+1 :tu:
-
Very nice Steve :tu:
Sent from my XT901 using Tapatalk
-
Nate
That's us mobile
-
These two just arrived in todays mail.
The Crunch is smaller than expected and the Raptor is larger than anticipated.LOL
-
These two just arrived in todays mail.
The Crunch is smaller than expected and the Raptor is larger than anticipated.LOL
The Raptor is one of my favorite LM tools. I don't carry it on me but do use it around the house a lot.
Besides the largeness, how are you getting along with it?
-
I've been in possession of it for no more than one hour.I'm still fiddling with it to figure out its tool set..
I did have to tighten the pivot screw on the scissors though.
-
I've been in possession of it for no more than one hour.I'm still fiddling with it to figure out its tool set..
I did have to tighten the pivot screw on the scissors though.
That's a little scary to hear - loose right out of the package - hmm...
-
I've been in possession of it for no more than one hour.I'm still fiddling with it to figure out its tool set..
I did have to tighten the pivot screw on the scissors though.
That's a little scary to hear - loose right out of the package - hmm...
Yes,there was noticeable wobble at the scissor pivot. A little judicious turning of the pivot with the proper torx driver and all appears to be OK.
-
I bought a Supper Tool 200 today on eBay it will be here next Saturday.
-
I bought a Supper Tool 200 today on eBay it will be here next Saturday.
Hopefully in time for supper. ;)
-
I hope so there is nothing like a supper tool for super. My kat likes them as well. :D
-
Happy Father's Day to me.
Best. Wife. Ever.
(http://images.tapatalk-cdn.com/15/06/19/b4482ed378f288c2adef4eb056bfb118.jpg)
Sent from my iPhone using Tapatalk
-
Good wife indeed bayoublade :tu:
-
Good wife indeed bayoublade :tu:
I concur, good sir.
Sent from my iPhone using Tapatalk
-
I recently received a box full of LM goodness from scrappy....
Original SS Skeletool with PE blade
Skeletool CX with combo blade
Original Charge ti - finally after almost 2yrs searching, the elusive ti completes the original titanium trio for me tti, xti and now ti :drink:
ST300 EOD
MUT EOD
I feel very very lucky to have gotten all these models that have been eluding me for sometime - massive thanks to Terry :hatsoff:
BUT it was a purchase that very very nearly broke the camels back for me. My partner found out!!......after I'd promised I would curb my MT spending and went utterly ballistic :rant: :twak: :twak: :rant: - quite rightly I suppose :think: ..... I've just had to sell an awful lot of stuff at a fraction of its worth to recoup my spending - I'm still gettin' the silent treatment almost 2wks on!! :facepalm:
It was that close!! Phew :whistle:
-
BUT it was a purchase that very very nearly broke the camels back for me. My partner found out!!......after I'd promised I would curb my MT spending and went utterly ballistic :rant: :twak: :twak: :rant: - quite rightly I suppose :think:
Well ..... a promise is a promise, and if you break it then I would expect serious consequences. >:( :twak: :twak: :twak:
Nice haul, BTW :D
-
BUT it was a purchase that very very nearly broke the camels back for me. My partner found out!!......after I'd promised I would curb my MT spending and went utterly ballistic :rant: :twak: :twak: :rant: - quite rightly I suppose :think:
Well ..... a promise is a promise, and if you break it then I would expect serious consequences. >:( :twak: :twak: :twak:
Nice haul, BTW :D
Thanks for the support buddy :pok: ;)
Still, the good thing about having to sleep on the sofa is I get to watch late night TV!! - not too bad :D .....I'm just glad there's no room in the garage!!
-
(http://images.tapatalk-cdn.com/15/06/24/8e695dc902dd0c8c58ea0a882bb39fe2.jpg)
Wedding present from my new bride!
-
(http://images.tapatalk-cdn.com/15/06/24/8e695dc902dd0c8c58ea0a882bb39fe2.jpg)
Wedding present from my new bride!
Congrats ! How do you like it ?
-
I have a OHT and Style CS on the way. This MT thing is certainly crazy. I started off with a wave, sold it, had a charge TTi sold it, had a OHT sold it, and then got a Rebar and EDC'd it for a year till it broke and now I'm back with another Wave and a OHT on the way. I've probably owned almost every Leatherman model and all the popular Vic knives off and on for 2 years now. I might need to take a break from this forum. ;)
-
I have a OHT and Style CS on the way. This MT thing is certainly crazy. I started off with a wave, sold it, had a charge TTi sold it, had a OHT sold it, and then got a Rebar and EDC'd it for a year till it broke and now I'm back with another Wave and a OHT on the way. I've probably owned almost every Leatherman model and all the popular Vic knives off and on for 2 years now. I might need to take a break from this forum. ;)
I too have traded away and reacquired various LM's over the years. Some of which I cannot replace today and wish I'd kept. My favorite is my NIB PST II :D
-
I have a OHT and Style CS on the way. This MT thing is certainly crazy. I started off with a wave, sold it, had a charge TTi sold it, had a OHT sold it, and then got a Rebar and EDC'd it for a year till it broke and now I'm back with another Wave and a OHT on the way. I've probably owned almost every Leatherman model and all the popular Vic knives off and on for 2 years now. I might need to take a break from this forum. ;)
I too have traded away and reacquired various LM's over the years. Some of which I cannot replace today and wish I'd kept. My favorite is my NIB PST II :D
Glad you really love that PST II and I think it found its proper home. :salute:
-
I have a OHT and Style CS on the way. This MT thing is certainly crazy. I started off with a wave, sold it, had a charge TTi sold it, had a OHT sold it, and then got a Rebar and EDC'd it for a year till it broke and now I'm back with another Wave and a OHT on the way. I've probably owned almost every Leatherman model and all the popular Vic knives off and on for 2 years now. I might need to take a break from this forum. ;)
I too have traded away and reacquired various LM's over the years. Some of which I cannot replace today and wish I'd kept. My favorite is my NIB PST II :D
Glad you really love that PST II and I think it found its proper home. :salute:
Thanks Cap'n, it's the best money I ever spent. To me, it sets the standard for what a proper multitool should be and that's why I scrutinize others so much.
-
(http://images.tapatalk-cdn.com/15/06/24/8e695dc902dd0c8c58ea0a882bb39fe2.jpg)
Wedding present from my new bride!
Congrats ! How do you like it ?
Love it so far! Took a little getting used to, but now I feel strange without it. Haven't used it really but it seems to be solidly built.
-
My latest two. (http://images.tapatalk-cdn.com/15/06/26/6f0911141780cce811f2f2f5f346177c.jpg)
-
BO ST-200
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_5495_zpsgblhhnrv.jpg)
-
Nice one Steve :tu:
Sent from my XT901 using Tapatalk
-
Thanks Kyle !
-
Nice one Steve :tu:
Sent from my XT901 using Tapatalk
+1 very cool :drool:
-
When I visited my local outdoorshop a couple of weeks ago they gave a 30% discount on the Leatherman Skeletools they had in stock, I was tempted but hoped that they would go down to 50%, and guess what ... :D
(http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20Skeletool%2050%20percent%20discount/skeletool%20a_zpsmyy9dlv0.jpg) (http://s739.photobucket.com/user/Rikske77/media/Leatherman%20Skeletool%2050%20percent%20discount/skeletool%20a_zpsmyy9dlv0.jpg.html)
-
Oddly enough, I still had to pay 100% at the register ... :think:
(http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20Skeletool%2050%20percent%20discount/skeletool%20b_zpskszkboqt.jpg) (http://s739.photobucket.com/user/Rikske77/media/Leatherman%20Skeletool%2050%20percent%20discount/skeletool%20b_zpskszkboqt.jpg.html)
:whistle:
-
Good deal Eric :tu:
Sent from my XT901 using Tapatalk
-
Leatherman Contest win. :mail:
Had to add a smaller link as it was a tad snug. Tread has some heft to it too.
-
What contest did you win?
-
(http://i293.photobucket.com/albums/mm56/ossa1970/65bebc3b2183df0fd725facc73acaa6a.jpg)
(http://i293.photobucket.com/albums/mm56/ossa1970/203f4b6afe3af4f9fd624f09ffc5c2a4.jpg)
(http://i293.photobucket.com/albums/mm56/ossa1970/24b2fbe9b3587907861f3fb4b1b39e64.jpg)
-
OSSA1970. I had a 1972 250 Pioneer. One of the best enduros in it's day.
I just got a 2000 1st gen Wave.
-
I just got the Mini. All cleaned up and ready to go. I don't think it was really used by the looks of it. It was a bit dirty, but cleaned up just fine :)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150709_125826_788_zps4v64fot7.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150709_125826_788_zps4v64fot7.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150709_125942_000_zpsr3w6ff6o.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150709_125942_000_zpsr3w6ff6o.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150709_125923_677_zpstozsswpx.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150709_125923_677_zpstozsswpx.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150709_130126_651_zpsnfah991q.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150709_130126_651_zpsnfah991q.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150709_130024_516_zpseypf3wah.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150709_130024_516_zpseypf3wah.jpg.html)
Sent from my XT901 using Tapatalk
-
OSSA1970. I had a 1972 250 Pioneer. One of the best enduros in it's day.
I just got a 2000 1st gen Wave.
I agree, I had a 1970 Mick Andrews 250 Trials, green and yellow, same as the Pioneer. Loved it.
-
I got myself an original Supertool :D
-
I just got the Mini. All cleaned up and ready to go. I don't think it was really used by the looks of it. It was a bit dirty, but cleaned up just fine :)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150709_125826_788_zps4v64fot7.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150709_125826_788_zps4v64fot7.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150709_125942_000_zpsr3w6ff6o.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150709_125942_000_zpsr3w6ff6o.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150709_125923_677_zpstozsswpx.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150709_125923_677_zpstozsswpx.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150709_130126_651_zpsnfah991q.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150709_130126_651_zpsnfah991q.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150709_130024_516_zpseypf3wah.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150709_130024_516_zpseypf3wah.jpg.html)
Sent from my XT901 using Tapatalk
Congrats ! Minitool is one of the nicest Leathermans. :2tu:
-
A $4 eBay PST, worked over pretty well, but plenty of life left. Wish I had pics of the before.. It was pretty dirty, completely broken blade, jammed cutters. It's from 0194/0194, Marlboro edition. I took it apart, soaked the plier head in 50/50 ATF/acetone. Spent an hour or so cleaning every piece with a shop rag and a bit of wood to scrape with.
After cleaning and working the plier head out, I grabbed a hand file and went to town on the wire cutters, which now bypass with minimal contact, only at the very end, and not enough to really hold the jaws shut. The cutters still work fine.
Next, I set about fixing my knife situation. I had a combo edge sog blade, off a powerlock. It was better than the stub left, but a touch too thin. I had to steal a washer off of my custom kick, and then set about hand filing the back of the pivot so it would sit right in the handle, and a little off the top so the lockup isn't bending the spring so far.
In the end, the Philips is chewed but functional, the file is broken but mostly there, the little driver is now reprofiled, in addition to the above. But for $4, and a bit of love, this tool still has a lot of life left, no need to involve the company :tu:
-
A $4 eBay PST, worked over pretty well, but plenty of life left. Wish I had pics of the before.. It was pretty dirty, completely broken blade, jammed cutters. It's from 0194/0194, Marlboro edition. I took it apart, soaked the plier head in 50/50 ATF/acetone. Spent an hour or so cleaning every piece with a shop rag and a bit of wood to scrape with.
After cleaning and working the plier head out, I grabbed a hand file and went to town on the wire cutters, which now bypass with minimal contact, only at the very end, and not enough to really hold the jaws shut. The cutters still work fine.
Next, I set about fixing my knife situation. I had a combo edge sog blade, off a powerlock. It was better than the stub left, but a touch too thin. I had to steal a washer off of my custom kick, and then set about hand filing the back of the pivot so it would sit right in the handle, and a little off the top so the lockup isn't bending the spring so far.
In the end, the Philips is chewed but functional, the file is broken but mostly there, the little driver is now reprofiled, in addition to the above. But for $4, and a bit of love, this tool still has a lot of life left, no need to involve the company :tu:
You're a good man. I find your story inspiring :tu: :tu:
-
Great save SAK :tu:
-
In my search for an original leather sheath for my Supertool I finally scored one on E-bay, it even came with another Supertool in it :facepalm:
-
Hey thanks guys! :salute:
What can I say? I hate spending more money than I have to :rofl:
Tough old tools, though. :tu:
Steve- I've been tempted by a couple, just for the sheath.. If only I sheath carried...
-
In my search for an original leather sheath for my Supertool I finally scored one on E-bay, it even came with another Supertool in it :facepalm:
:D
-
If I won the lottery or came into some money I would so go on a LM buying spree >:D
-
Check out the 'what have we got on the way' thread and witness the spending power of a 20 year old :facepalm:
-
In my search for an original leather sheath for my Supertool I finally scored one on E-bay, it even came with another Supertool in it :facepalm:
Nice, and that's the MTO way....you must know that by now ;)
Sent from my XT901 using Tapatalk
-
In my search for an original leather sheath for my Supertool I finally scored one on E-bay, it even came with another Supertool in it :facepalm:
Nice, and that's the MTO way....you must know that by now ;)
Sent from my XT901 using Tapatalk
:D
-
Bought this No. 6 new for $6.75 shipped. I bought it mostly because the seller threw in a Duracell screwdriver, which I had gotten with batteries years before, but my grandmother once confused the handle (has a double sided flat and Phillips blade bit and I'd misplaced the bit at the time) for a dead AA battery and tossed it with a bunch of other dead Duracells I'd forgotten to throw away at the time. Learned my lesson that day, throw away my dead batteries as soon as I change them!
I will be using the No 6 as a backup and a a multitool I can carry when I'm going to places that don't allow knives. The screwdriver will be used for the same thing I kept the old one for, one I keep on my dresser to open battery compartments.
At about $3 a piece, I think I did well.
-
I've got this one on the way.
(http://i.ebayimg.com/00/s/ODEwWDE1NTY=/z/E7UAAOSwDNdVlY4x/$_57.JPG)
(http://i.ebayimg.com/00/s/MTQ0MFg4MTA=/z/UDoAAOSwMmBVlY3C/$_57.JPG)
-
I've got this one on the way.
(http://i.ebayimg.com/00/s/ODEwWDE1NTY=/z/E7UAAOSwDNdVlY4x/$_57.JPG)
(http://i.ebayimg.com/00/s/MTQ0MFg4MTA=/z/UDoAAOSwMmBVlY3C/$_57.JPG)
:drool: If my core didn't have a NATO designation, I'd be pretty darn jealous about now!
-
What does one with Nato des. look like ...got any pics :pok:
-
What does one with Nato des. look like ...got any pics :pok:
:whistle:
Nothing special, bit I like it. I like any official markings :D
-
Cool !
-
Cool !
Hey, thanks! I like it, a pleasant eBay surprise :D it's an 0207
-
Never saw a military issued Leatherman before, either. I thought the Gerber MPs were the only ones issued to US military personnel. I thought they had to buy anything else they wanted themselves.
-
Perhaps not US, but some other NATO country??
-
I had a (vague) idea that NATO only issue a number once for any particular tool (presumably organised by the first country that wants to use it for their defence forces). So the same NATO number can appear on tools from multiple countries. I have a PST with a NATO number "786-5369 ^ 1992" which I believe was limited issue from Portsmouth UK (to navy divers).
-
Latest additions... Kick, Fuse, Blast and Core. The BO Core was hard to find.
-
I picked up two LM's today. A Mini Tool :woohoo: and a Squirt PS4. :tu: Got them both for $20 CAD too! :D The Mini Tool is dated 0595 and 0995.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/7FA6B73D-974D-41FF-9281-91E02CBA81F5.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/7FA6B73D-974D-41FF-9281-91E02CBA81F5.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/08FFC1F8-2A05-4926-A003-6F2ED1C6C46A.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/08FFC1F8-2A05-4926-A003-6F2ED1C6C46A.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/127C8DB7-63EF-4416-86EE-B9BA37CCD6B4.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/127C8DB7-63EF-4416-86EE-B9BA37CCD6B4.jpg.html)
-
I picked up two LM's today. A Mini Tool :woohoo: and a Squirt PS4. :tu: Got them both for $20 CAD too! :D The Mini Tool is dated 0595 and 0995.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/7FA6B73D-974D-41FF-9281-91E02CBA81F5.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/7FA6B73D-974D-41FF-9281-91E02CBA81F5.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/08FFC1F8-2A05-4926-A003-6F2ED1C6C46A.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/08FFC1F8-2A05-4926-A003-6F2ED1C6C46A.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/127C8DB7-63EF-4416-86EE-B9BA37CCD6B4.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/127C8DB7-63EF-4416-86EE-B9BA37CCD6B4.jpg.html)
that is a sweet deal!
-
I picked up two LM's today. A Mini Tool :woohoo: and a Squirt PS4. :tu: Got them both for $20 CAD too! :D The Mini Tool is dated 0595 and 0995.
that is a sweet deal!
Sweet deal indeed, congrats :tu:
-
I picked up two LM's today. A Mini Tool :woohoo: and a Squirt PS4. :tu: Got them both for $20 CAD too! :D The Mini Tool is dated 0595 and 0995.
that is a sweet deal!
Sweet deal indeed, congrats :tu:
Thanks, I was pretty happy with that. :) I've wanted a Mini Tool for a while, just never really came across any. This is the first one I've even seen in person. The inside tools are really lacking, but you get a nice set of pliers in a super small package. :tu:
-
Since it had several things my PST II lacked, like separate serrated and plain edge blades (the partially serrated blades can be a pain at several times, and requires me to carry an extra pocketknife), as well as an awl (the PST II trades it for scissors) and a saw (something all my 91mm SAKs have, but my Leatherman doesn't) in addition to locking blades (which is good as a safety feature) I decided my next Leatherman would be the Super Tool.
Found an original Super Tool on Ebay for $23 shipped after checking for a couple weeks for one in the under $25 category. Seller had ten, and all looked to be in quite filthy condition. I'm really liking the tools made by Leatherman when Tim Leatherman was still the CEO. There's just something about the simple brick styling. In addition to that, many good condition used tools can be found for a great price!
Looks like cleaning it will be a chore! If there's rust (which there appears to be) how to I get it off without scratching?
Since the sticker has worn off showing me how to use it, how do I operate the locking mechanism?
I've provided a link to the listing since it's still active and I can't add all the pics in one post:
http://www.ebay.com/itm/271930179917?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
-
Give it a bath in some Wd-40, If there is rust try a toothbrush with baking soda paste as a mild abrasive. As far as the tool locks, just open another tool past halfway and that will unlock the other tool. Don't open all the tools at once as you wont be able to unlock them without prying the lock with a small flat head.
Good luck with the cleanup and post some before and after pics :pok:
-
I picked up two LM's today. A Mini Tool :woohoo: and a Squirt PS4. :tu: Got them both for $20 CAD too! :D The Mini Tool is dated 0595 and 0995.
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/7FA6B73D-974D-41FF-9281-91E02CBA81F5.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/7FA6B73D-974D-41FF-9281-91E02CBA81F5.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/08FFC1F8-2A05-4926-A003-6F2ED1C6C46A.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/08FFC1F8-2A05-4926-A003-6F2ED1C6C46A.jpg.html)
(http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/127C8DB7-63EF-4416-86EE-B9BA37CCD6B4.jpg) (http://s1077.photobucket.com/user/derekmachfx/media/Knives/127C8DB7-63EF-4416-86EE-B9BA37CCD6B4.jpg.html)
That's a tremendous value there. I love the PS4 :D
-
Since it had several things my PST II lacked, like separate serrated and plain edge blades (the partially serrated blades can be a pain at several times, and requires me to carry an extra pocketknife), as well as an awl (the PST II trades it for scissors) and a saw (something all my 91mm SAKs have, but my Leatherman doesn't) in addition to locking blades (which is good as a safety feature) I decided my next Leatherman would be the Super Tool.
Found an original Super Tool on Ebay for $23 shipped after checking for a couple weeks for one in the under $25 category. Seller had ten, and all looked to be in quite filthy condition. I'm really liking the tools made by Leatherman when Tim Leatherman was still the CEO. There's just something about the simple brick styling. In addition to that, many good condition used tools can be found for a great price!
Looks like cleaning it will be a chore! If there's rust (which there appears to be) how to I get it off without scratching?
Since the sticker has worn off showing me how to use it, how do I operate the locking mechanism?
I've provided a link to the listing since it's still active and I can't add all the pics in one post:
http://www.ebay.com/itm/271930179917?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Some members have had good luck with Coke baths. There are a few threads kicking around with more info.
-
I just got a Surge. 8)
-
My Core arrived the other day
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Core/DSC02429_zpsd6x1bpxw.jpg)
-
Inner two thanks to Corwyn (thanks again, buddy!), outer two from eBay :D
I didn't know the new style PST head has USA, so that was a pleasant surprise. And the blunt nose on the big jaws? :drool:
-
Inner two thanks to Corwyn (thanks again, buddy!), outer two from eBay :D
I didn't know the new style PST head has USA, so that was a pleasant surprise. And the blunt nose on the big jaws? :drool:
I have 5 PST's and they are probably my favorite full-size multitools. What are your impressions of yours?
-
Inner two thanks to Corwyn (thanks again, buddy!), outer two from eBay :D
I didn't know the new style PST head has USA, so that was a pleasant surprise. And the blunt nose on the big jaws? :drool:
I have 5 PST's and they are probably my favorite full-size multitools. What are your impressions of yours?
Literally the same. The only full size tool I will pocket carry regularly, though I do prefer the PST II. My dad has been carrying a PST since the early 90's as well. Such a usable toolset, and a durable old school quality leatherman, in the thinnest, sleekest package around. Plus, the quintessential plier tool. Love em. Absolutely love em. I've got a BO one that should be arriving Monday :D
-
PST&ToolAdapter
-
Nice score son of Odin.
-
Nice score son of Odin.
Indeed :tu:
Sent from my XT901 using Tapatalk
-
Dmitry does like his "new in a sealed clamshell" MTs ;) (and this is a nice one :tu: )
-
Couple I've been waiting for were in my mailbox today :mail: :D
-
Nice SK :tu:
-
Nice SK :tu:
Thanks! I've always wanted a BO PST :drool: :drool:
And I missed my OHT, glad to have one back! And my favorite color, too!
-
Nice SK :tu:
Thanks! I've always wanted a BO PST :drool: :drool:
And I missed my OHT, glad to have one back! And my favorite color, too!
Glad to see it made it OK!
-
Nice SK :tu:
Thanks! I've always wanted a BO PST :drool: :drool:
And I missed my OHT, glad to have one back! And my favorite color, too!
Glad to see it made it OK!
Thanks again, buddy! :salute:
-
My $20 flea market find this weekend!(http://images.tapatalk-cdn.com/15/07/20/4e3c5e22d35e450ecf7319567cd19eb9.jpg)
-
Nice catch on that wave! Looks to be mostly unused?
Better pics of some new shiny
-
Nice catch on that wave! Looks to be mostly unused?
Better pics of some new shiny
Is the Spydie an Endura?
-
Nice catch on that wave! Looks to be mostly unused?
Better pics of some new shiny
Is the Spydie an Endura?
Why yes, my new endura 4 from sir_mike! Gotta live the big handle tools ;)
-
My $20 flea market find this weekend!(http://images.tapatalk-cdn.com/15/07/20/4e3c5e22d35e450ecf7319567cd19eb9.jpg)
Helluva find there :tu:
-
Helluva find there :tu:
(http://images.tapatalk-cdn.com/15/07/20/e08e269a8f50b02e62abc33033e4a17f.jpg)
Thanks. Has some pitting but it looks to have carried for a while but never used. The original edge is still on it and sharp. Nothing used at all. Crazy for a 15 year old. Poor thing finally found a home that will let it out to play.
-
Nice find. It should clean up nicely.
-
Nice find. It should clean up nicely.
it did aside from the pitting. The pivots got the worst of it. When I get a 5 point security bit or two I'll sand them down a bit.
-
My $20 flea market find this weekend!(http://images.tapatalk-cdn.com/15/07/20/4e3c5e22d35e450ecf7319567cd19eb9.jpg)
Great find there. Congrats! I too tried the flea markets and pawn shops looking for the older Wave but no luck. Finally scored one on ebay for $30, that too because it was not listed as a Wave. Some older Waves are going for over $50. Yours is a steal. Mine is on the way... cannot wait.
-
The Super Tool arrived today. It looked nothing like the nasty ones I posted earlier. Hardly any traces of use! The only wear I could find was rubbing on the instruction decal and some tiny rust spots on the tangs of a couple of the tools.
Kind of strange. I found out it's dated 0498, roughly one year to the date after my PST II was made!
-
Sounds Luke a sweet score Cody :tu:
Sent from my XT901 using Tapatalk
-
Excellent deal Cody :tu:
-
I want to fly a plane to Oregon, load a dumptruck up with Leathermans and drive it back to Florida :ahhh :gimme: :gimme: :gimme:
-
Hey All,
New here... been carrying a Micra for years now. Have a Sideclip in our Family Disaster Kit. Gave my wife a Sidekick for Xmas a couple years ago (she had it on her list :) ) Gave my Dad a full-size LM tool several years ago (Wingman or Super-tool if I remember right).
Since joining I've purchased a Squirt PS4 and a Wave. Like them both but the Wave really stands out!
Cheers,
Allen
-
Welcome Allen!
-
Welcome Allen. Good that all your LM gifts is in the family. Lucky them. I suppose you can always ask them to give it back at some point, haha.
I gifted PSTs to my buddies when I got my first job. Some of them them don't have them any more and some still do but refuse to give it back.. .useless buggers, lol, kidding. I would give my life to them, errr maybe. Definitely not to the one who uses his to clean his bbq grill.
-
Latest LM purchase
At the LM retail store in Portland last week I picked up:
a Jam tool for my Styles
Wave pocket clip
And this might not count, but a MUT tee (I love my MUT tool) and a coffee mug from them too.
-
Finally got an original Wave. I remember seeing this in stores in 99 and thinking this will be nice to have some day. Looks very compact to how I remember. Way ahead of it's time for sure. Glad to have this in my collection.
-
Nice one rishardh :tu: I'm carrying mine today.
Sent from my XT901 using Tapatalk
-
Hopefully, if it has been delivered today, by the time I get home from work my latest will be a Juice XE6 and the removable bit kit to go with it.
Sadly no one was home so I have to wait another day and collect from the local post office tomorrow
-
A package arrived... :mail:
Inside was this:
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/20150730_185341.jpg)
Cool, let's see what's inside that 8)
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/20150730_185458.jpg)
Fitting the adapter and the bits inside the holder was a bit fiddly, but i finally got them in...
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/20150730_185918.jpg)
So there you have it, my NIB 0898 stamped LM Tool Adapter :)
-
^ Nice :tu:
-
Very nice. I've got them for my surges, though had to make some slight adjustments to them as they aren't made to fit them.
Sent from my SM-N910F using Tapatalk
-
I won that same set from Kampfer's GAW and they are very nice accessories. :tu:
-
My latest is now a Juice XE6 and the bit kit for it, I picked it up from the post office on my way home.
On first looks it is good, though smaller than I thought it would be and the perfect pocket size. After carrying a surge daily at work this feels so light.
Sent from my SM-P600 using Tapatalk
-
I won that same set from Kampfer's GAW and they are very nice accessories. :tu:
I know, you snatching it was the reason I had to buy one :rant:
:rofl:
Seriously though, it is definitely a nice piece of kit, I paired it up with my Minitool :)
-
Like new PST II
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/PST%20PST%20II/IMG_5729_zps9yettkzm.jpg)
-
I visited my local gun shop today to pick up my shotgun. I found another set of these older stocked 2009 Cores + Monarch 300 combos. I looked at the back of one and the AAA battery was all corroded but with no damage to anything else. I mentioned this and the woman behind the counter said half off the lowest price for you just to get them off our hands. 37 dollars each...SOLD!
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_9022small_zpsnakkfvtu.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_9022small_zpsnakkfvtu.jpg.html)
So that makes 3 sets of these I now have. The corroded battery did compel me to open one up. and I am thinking it just might be time to EDC a Core and Monarch.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_9023small_zpsdqcv2lsb.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_9023small_zpsdqcv2lsb.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_9024small_zpsutexyqhc.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_9024small_zpsutexyqhc.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_9025small_zpsajkwswy7.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_9025small_zpsajkwswy7.jpg.html)
:D
-
Sweet score Chako :tu:
Sent from my XT901 using Tapatalk
-
(http://i765.photobucket.com/albums/xx298/Nets1988/IMG_20150805_214105_201.jpg)
-
All that ebay time on the toilet in the mornings paid off. Scored this pair... all within a week.
(http://i48.photobucket.com/albums/f232/rishardhanaffi/LMHybVis2_zpsbqdbwygg.jpg) (http://s48.photobucket.com/user/rishardhanaffi/media/LMHybVis2_zpsbqdbwygg.jpg.html)
(http://i48.photobucket.com/albums/f232/rishardhanaffi/LMHybVis5_zpsyiolci3v.jpg) (http://s48.photobucket.com/user/rishardhanaffi/media/LMHybVis5_zpsyiolci3v.jpg.html)
(http://i48.photobucket.com/albums/f232/rishardhanaffi/LMHybVis4_zpsmvrx6hsv.jpg) (http://s48.photobucket.com/user/rishardhanaffi/media/LMHybVis4_zpsmvrx6hsv.jpg.html)
(http://i48.photobucket.com/albums/f232/rishardhanaffi/929d735f-eea9-46d5-a77c-1ff348f71506_zpsmvicdmdz.jpg) (http://s48.photobucket.com/user/rishardhanaffi/media/929d735f-eea9-46d5-a77c-1ff348f71506_zpsmvicdmdz.jpg.html)
-
OG Wave, It didn't come with a sheath but I had traded NKlamerus for this sheath a while back just cause I liked it. Fits like a glove :tu:
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Wave/IMG_5769_zpsh1zsvgih.jpg)
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Wave/IMG_5770_zps0s5lqvt9.jpg)
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Wave/IMG_5768_zpsipqjywhg.jpg)
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Wave/IMG_5773_zpssmblrlvd.jpg)
-
I visited my local gun shop today to pick up my shotgun. I found another set of these older stocked 2009 Cores + Monarch 300 combos. I looked at the back of one and the AAA battery was all corroded but with no damage to anything else. I mentioned this and the woman behind the counter said half off the lowest price for you just to get them off our hands. 37 dollars each...SOLD!
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_9022small_zpsnakkfvtu.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_9022small_zpsnakkfvtu.jpg.html)
So that makes 3 sets of these I now have. The corroded battery did compel me to open one up. and I am thinking it just might be time to EDC a Core and Monarch.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_9023small_zpsdqcv2lsb.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_9023small_zpsdqcv2lsb.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_9024small_zpsutexyqhc.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_9024small_zpsutexyqhc.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_9025small_zpsajkwswy7.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_9025small_zpsajkwswy7.jpg.html)
:D
Nice score! :tu:
-
Nice one Steve :tu: It looks to be in good condition.
Sent from my XT901 using Tapatalk
-
Nice one Steve :tu: It looks to be in good condition.
Sent from my XT901 using Tapatalk
Thanks, yes it's in really good shape.
-
All that ebay time on the toilet in the mornings paid off. Scored this pair... all within a week.
Good score. :tu: Those LM pruners are getting harder to find these days (and prices seem to keep climbing)
-
All that ebay time on the toilet in the mornings paid off. Scored this pair... all within a week.
Good score. :tu: Those LM pruners are getting harder to find these days (and prices seem to keep climbing)
No kidding, I thought I could never afford one. From what I have seen, when it comes to retired tools, from time to time people sell unused or brand new MTs for what they paid not knowing what the going price is.
-
Yeah there is one set of those pruners on eBay right now for $224.99 buy it now. It's the hunting version. I'd buy one in a second but no way would I pay that kind of $
Sent from my iPhone using Tapatalk
-
Another old style Juice S2. (http://images.tapatalk-cdn.com/15/08/08/fd8dc86ad46fe7a555f3774941730de1.jpg)
-
PST :D
(http://s25.postimg.org/qxqjc5ybj/Leatherman_PSTwwrerwrwe_1.jpg)
-
PST :D
(http://s25.postimg.org/qxqjc5ybj/Leatherman_PSTwwrerwrwe_1.jpg)
:2tu:
-
I just got this one today in the mail from the first Leatherman OHT GAW. Thanks go out to Leatherman for supporting this forum.
(http://images.tapatalk-cdn.com/15/08/10/85d558d5ca9139cd0f28d822e4f36de5.jpg)
-
That's a great looking OHT!
-
PST :D
(http://s25.postimg.org/qxqjc5ybj/Leatherman_PSTwwrerwrwe_1.jpg)
Looks spanking new... very nice.
-
I just got this one today in the mail from the first Leatherman OHT GAW. Thanks go out to Leatherman for supporting this forum.
(http://images.tapatalk-cdn.com/15/08/10/85d558d5ca9139cd0f28d822e4f36de5.jpg)
Congrats! OHT is on my short wish list. Till then, look and :drool:
-
A new Rebar from the Mod Giveaway! I was very surprised at the difference between it and my old Core!!!! :tu:
-
Good to see people happy with their anniversary prizes. :tu:
-
A minty Wave, a well-used Charge ALX, and a used-but-cared-for Blast landed today.
Suddenly, I'm knee-deep in MTs, and I thought I was just a SAK guy. :-\
The Wave accessories, I had from the Surge.
(http://i134.photobucket.com/albums/q112/jzorns/Knives/image_zpsp8hrnw3z.jpg) (http://s134.photobucket.com/user/jzorns/media/Knives/image_zpsp8hrnw3z.jpg.html)
(http://i134.photobucket.com/albums/q112/jzorns/Knives/image_zpsdz8el57n.jpg) (http://s134.photobucket.com/user/jzorns/media/Knives/image_zpsdz8el57n.jpg.html)
(http://i134.photobucket.com/albums/q112/jzorns/Knives/image_zpskwszdv9r.jpg) (http://s134.photobucket.com/user/jzorns/media/Knives/image_zpskwszdv9r.jpg.html)
(http://i134.photobucket.com/albums/q112/jzorns/Knives/image_zpsos12v3k0.jpg) (http://s134.photobucket.com/user/jzorns/media/Knives/image_zpsos12v3k0.jpg.html)
(http://i134.photobucket.com/albums/q112/jzorns/Knives/image_zpsyr5p02ng.jpg) (http://s134.photobucket.com/user/jzorns/media/Knives/image_zpsyr5p02ng.jpg.html)
-
A pair of squirts
(http://images.tapatalk-cdn.com/15/08/10/cd7e983ad6401398ff6ff5e725068f9c.jpg)
Sent from my SM-N910F using Tapatalk
-
Oh yeah Rebar. :)
(https://farm6.staticflickr.com/5706/20531426025_331749a95d_b.jpg) (https://flic.kr/p/xhhVDT)
-
What do you think of the rebar?
-
What do you think of the rebar?
Is that a trick question?
-
What do you think of the rebar?
Is that a trick question?
only if it's a trick answer...
-
What do you think of the rebar?
Is that a trick question?
only if it's a trick answer...
:think: :D
-
Yeah, Rebar!
I have a Rebar! :woohoo:
That is to say, I have a Rebar until saturday, when my father will get it as a birthday gift!
Until then, I am airing the sheath and working the tools. :multi:
Such a difference between the first opening and the 10th time, now the clumping is a lot less. :tu:
But I am still twisting my fingernails trying to get the saw and file. Is there any trick to getting them out easier?
-
Such a difference between the first opening and the 10th time, now the clumping is a lot less. :tu:
But I am still twisting my fingernails trying to get the saw and file. Is there any trick to getting them out easier?
I just pull mine out with my fingers, I don't even use nails. (Maybe I have small fingers?) Granted, mine has loosened up with time, I can't recall if these were hard to get out when it was new.
-
Such a difference between the first opening and the 10th time, now the clumping is a lot less. :tu:
But I am still twisting my fingernails trying to get the saw and file. Is there any trick to getting them out easier?
I just pull mine out with my fingers, I don't even use nails. (Maybe I have small fingers?) Granted, mine has loosened up with time, I can't recall if these were hard to get out when it was new.
I just tried that and it worked! Thank you! :tu:
Honestly, that works better than trying to catch the "nail nick" with the fingernail. :think:
Once again, MTo came to the rescue! :)
-
Just got my Croc from the Thread Killer giveaway! :tu:
-
Just got my Croc from the Thread Killer giveaway! :tu:
It's only now that it dawned on me that the Croc is HUGE!
Thanks for the pic :tu:
-
Got all 3 of these in the past week
(http://images.tapatalk-cdn.com/15/08/13/06c255170f25a800603f0b4847966136.jpg)
Sent from my iPhone using Tapatalk
-
Just got my Croc from the Thread Killer giveaway! :tu:
It's only now that it dawned on me that the Croc is HUGE!
Thanks for the pic :tu:
It's actually not that big in hand (that's what she said...). It fits nicely in the bit sleeve area or an LM sheath with a single bit card. It also disappears in the bottom of a pocket as it is quite light weight and not thick at all.
-
I just tried that and it worked! Thank you! :tu:
Honestly, that works better than trying to catch the "nail nick" with the fingernail. :think:
Once again, MTo came to the rescue! :)
Great. The Rebar is an excellent little tool, I'm sure your father will love it.
-
Just got my Croc from the Thread Killer giveaway! :tu:
:2tu: That was one sought after croc, enjoy. :cheers:
-
Skeletool CX... got it brand new from TTC for 43 USD... almost the price I got for my old SS one. I guess they played around ith it for a bit, but I honestly couldn't find any imperfections.
Love it so far.... looks far better than the SS one, feels a bit lighter and the blade is leaps and bounds better (no serrations either... yeeey... most importantly if feels less cheapish and rattly... right now it's the only Leatherman I still have and definitely my favourite out of all I ever had...
(https://lh3.googleusercontent.com/-svG7fPmotSI/VdzLARa0NJI/AAAAAAAAJ-U/aizyMQFoMWQ/s720-Ic42/Leatherman%252520SkeleTool%252520CX%252520a.JPG)
(https://lh3.googleusercontent.com/-jZuwRFPT0i8/VdzLASJRxtI/AAAAAAAAJ-I/IZfwcg_-mEE/s720-Ic42/Leatherman%252520SkeleTool%252520CX%252520b.JPG)
-
Skeletool CX... got it brand new from TTC for 43 USD... almost the price I got for my old SS one. I guess they played around ith it for a bit, but I honestly couldn't find any imperfections.
Love it so far.... looks far better than the SS one, feels a bit lighter and the blade is leaps and bounds better (no serrations either... yeeey... most importantly if feels less cheapish and rattly... right now it's the only Leatherman I still have and definitely my favourite out of all I ever had...
(https://lh3.googleusercontent.com/-svG7fPmotSI/VdzLARa0NJI/AAAAAAAAJ-U/aizyMQFoMWQ/s720-Ic42/Leatherman%252520SkeleTool%252520CX%252520a.JPG)
(https://lh3.googleusercontent.com/-jZuwRFPT0i8/VdzLASJRxtI/AAAAAAAAJ-I/IZfwcg_-mEE/s720-Ic42/Leatherman%252520SkeleTool%252520CX%252520b.JPG)
Congrats to a nice find. It´s a great tool. :tu:
-
Finally got a Rebar of my own after gifting one to my sister (and breaking it in for her). Ive never been so happy with a tool/knife purchase, and I got it for $25 looking brand new at a pawn shop. Should I spring the $35 for the Skeletool CX there as well?
-
Finally got a Rebar of my own after gifting one to my sister (and breaking it in for her). Ive never been so happy with a tool/knife purchase, and I got it for $25 looking brand new at a pawn shop. Should I spring the $35 for the Skeletool CX there as well?
Hell yes!! For a CX that is a great price :D
-
Got this Squirt P4 and S4 in a lot of keychain multitools. I've never had a Squirt before, but I can see why they're so popular. These are both very cool.
-
Got my first Leatherman today. A Squirt PS4. Absolutely loving it. So much capability in such a tiny thing. :tu:
-
I love my Squirt ES4 and the blue PS4....when I'm in business clothes that's my EDC.
-
Latest LM for me is a Skeletool CX which I like even more than I expected I would. Great driver on the end, really nicely finished and a great fit in the hand. Love the pocket clip - it rides well into the pocket of a pair of shorts.
-
Like new , never used ST200 and sheath.
-
I may just have to go grab that then...
-
The Old Surge... new to me, and the New Wave... old to me. Had to pair them up for this photo op.
(http://i48.photobucket.com/albums/f232/rishardhanaffi/LMWS1_zpsuth7dnns.jpg) (http://s48.photobucket.com/user/rishardhanaffi/media/LMWS1_zpsuth7dnns.jpg.html)
(http://i48.photobucket.com/albums/f232/rishardhanaffi/LMWS2_zpss7zrmcos.jpg) (http://s48.photobucket.com/user/rishardhanaffi/media/LMWS2_zpss7zrmcos.jpg.html)
(http://i48.photobucket.com/albums/f232/rishardhanaffi/LMWS3_zpslwtwhpey.jpg) (http://s48.photobucket.com/user/rishardhanaffi/media/LMWS3_zpslwtwhpey.jpg.html)
-
^ Nice :tu:
-
Like new , never used ST200 and sheath.
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_5902_zpszesiglkt.jpg)
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_5945_zpsm2mljugn.jpg)
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_5908_zpsnrjlsmqc.jpg)
-
Super tool from OB1
(http://forum.multitool.org/index.php?action=dlattach;topic=61613.0;attach=201156;image)
-
Nice one K, it looks like it's in great shape :tu:
-
Nice one K, it looks like it's in great shape :tu:
+1
Sent from my SM-G920R4 using Tapatalk
-
This is my first full size pliers-based multitool purchase.
I told myself I wasn't going to spend that much money right now... and then I did anyway.
(http://i.imgur.com/DzaiY0e.jpg)
-
Nice one WD :tu:
-
(http://i765.photobucket.com/albums/xx298/Nets1988/IMG_20150902_162514_020.jpg)
Just got this beauty in the mail. Some WD-40 and a sponge took off basically all the rust.
I simple cannot get over how sleek, compact and lightweight this thing is. Tim Leatherman really hit it out of the park on his first at bat with this thing.
-
I picked up one of those Leatherman #6 tools cause I wanted to see if they were actually usable and it was only like $5 shipped. I gotta say I think it is too small to actually use but I may be wrong.
Here is a pic with it next to a Mini champ for size comparison. What do you guys think? Usable or just a novelty?
-
Never had my hands on a #6, but man is it small. Is it supposed to do light prying duty? I'm a bit skeptical on that one.
-
BO Kick with BO Clip and a Wingman Arrived today.
-
A Fuse that I gifted out several years ago has returned to me. (The owner was upgraded to a Wave).
-
A Fuse that I gifted out several years ago has returned to me. (The owner was upgraded to a Wave).
Nice guy to give you the Fuse back.
-
A Fuse that I gifted out several years ago has returned to me. (The owner was upgraded to a Wave).
Nice guy to give you the Fuse back.
She appreciated it when I gifted it and appreciated the Wave more. Since she's not into collecting, she asked what to do with it and I offered to find a new home for it.
-
Got a nice deal on this used Juice S2. It's in great shape.
(http://i.imgur.com/1ZeJ4gM.jpg)
-
I just bought a new Leatherman Charge ALX BO for $60 score!!
(http://images.tapatalk-cdn.com/15/09/08/6814decde8a75a724a62c5af80f4abfa.jpg)(http://images.tapatalk-cdn.com/15/09/08/a31976bad04c53d6487cffd415edd8e4.jpg)(http://images.tapatalk-cdn.com/15/09/08/5d1429224d569b64bbc323ff24ff9984.jpg)
-
I got it a while ago, but a Leatherman Juice CS4.
-
I just bought a new Leatherman Charge ALX BO for $60 score!!
(http://images.tapatalk-cdn.com/15/09/08/6814decde8a75a724a62c5af80f4abfa.jpg)(http://images.tapatalk-cdn.com/15/09/08/a31976bad04c53d6487cffd415edd8e4.jpg)(http://images.tapatalk-cdn.com/15/09/08/5d1429224d569b64bbc323ff24ff9984.jpg)
$60!!! You lucky duck you. Congrats! I call dibs if you get rid of it. :pok:
-
Yea buddy!
-
Just got a great deal on a like new 1st gen Blast with leather sheath from my local Craigslist . The Guy bought it for his wife who never used it and into a drawer it went.
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Blast/IMG_6097_zpslauoe9ei.jpg)
-
Not my latest Leatherman, but its a Leatherman add on. Made by Evil himself.
Lock pick rake and tension wrench that both fit inside the Micra.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20and%20MT%201/DSC04756_zpsjsmhs0zv.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20and%20MT%201/DSC04756_zpsjsmhs0zv.jpg.html)
-
Very cool capt. :tu:
-
That is a very good idea/mod! I like that alot and wish I had that! :)
-
Not exactly a Leatherman but a tool for Leathermans made by Loki-Mobile
Seems to work well. :salute:
-
Not exactly a Leatherman but a tool for Leathermans made by Loki-Mobile
Seems to work well. :salute:
Where you get that?? i need get two :drool: :drool: :drool: :gimme:
-
Not exactly a Leatherman but a tool for Leathermans made by Loki-Mobile
Seems to work well. :salute:
Where you get that?? i need get two :drool: :drool: :drool: :gimme:
Yes. Please tell us :)
-
Not exactly a Leatherman but a tool for Leathermans made by Loki-Mobile
Seems to work well. :salute:
Where you get that?? i need get two :drool: :drool: :drool: :gimme:
Yes. Please tell us :)
http://forum.multitool.org/index.php/topic,61708.0.html
-
+1. Yes that´s the place.^ :)
-
I just bought a Wave to give as a Christmas present. Walmart has them on sale for $45.
-
Leatherman Juice S2 storm grey w. premium sheath. We were just starting to get along when I find a hair fine crack in the pliers. Just have to send her back. :cry: I´m however getting a new one.
(http://i57.tinypic.com/156cylh.jpg)
-
Mail time! :mail:
Lookie what was waiting when I got home...
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/20150923_191450.jpg)
My brand new LM Squirt ES4! :ahhh
More pictures to follow as soon as I get a chance to snap some in daylight :D
-
As promised, some more photos of the LM Squirt ES4 :D
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/20150926_113210.jpg)
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/20150926_113249.jpg)
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/20150926_113406.jpg)
Isn't she a beauty? Always been a sucker for redheads... :cheers:
-
Very nice mate. :tu:
-
Charge AL
(http://images.tapatalk-cdn.com/15/09/29/71a98db39cfc6d48db4dbc1bd712411f.jpg)
(http://images.tapatalk-cdn.com/15/09/29/6bcfa6f3c43a8c3ce03ca2cafbf7f401.jpg)
-
Nice :cheers:
-
Just received some mail this afternoon :mail:
(http://i.imgur.com/j3097d4.jpg)
-
I'm now the proud owner of a wave that I got through a deal with a member on here.
Sent from my SM-P600 using Tapatalk
-
A Wave. 39.99 NIB
-
A Wave. 39.99 NIB
Sweet score :tu:
-
Isn't she a beauty? Always been a sucker for redheads... :cheers:
Yes, now I want one too :ahhh
-
A Wave. 39.99 NIB
Killer deal!
-
Got a PST that, modulo a few rust spots, feels brand new. Still really stiff everywhere, all the tools look untouched, no scratches on the chassis, etc. Very happy.
-
A bit of baking soda and water rubbed on with your thumb will take the rust spots right off if you are interested in removing them.
-
Thanks for the tip!
-
Thanks for the tip!
No problem.
-
The Micra that came with my Rebar has two nail cleaners. One in place of the Phillips/flat screwdriver, DOH!
The duplicate nail thing doesn't have the file portion on it either.
-
The Micra that came with my Rebar has two nail cleaners. One in place of the Phillips/flat screwdriver, DOH!
The duplicate nail thing doesn't have the file portion on it either.
Another fine example of their QC :td:
-
...well.....I may have not told a lot of people....but I had lost my OHT for awhile. I knew I out it somewhere special so I'd know where it was.....but I forgot where that special spot was.....
Until today! In a panic to unlock a door I opened my toolbox and there she was...
(http://images.tapatalk-cdn.com/15/10/05/838e2861b7181420e7ae1c8e498f74fd.jpg)
-
Reunited... hip hip hooray !!!
-
The Micra that came with my Rebar has two nail cleaners. One in place of the Phillips/flat screwdriver, DOH!
The duplicate nail thing doesn't have the file portion on it either.
Another fine example of their QC :td:
Been seeing double tools in Leatherman's more lately.
-
In the past twenty four hours I have ordered/bought 3 leatherman style ps/cs
-
Isn't she a beauty? Always been a sucker for redheads... :cheers:
Yes, now I want one too :ahhh
I will be fondling a red soon :D It's on it's way.
-
In the past twenty four hours I have ordered/bought 3 leatherman style ps/cs
Nice... Style with Pliers + Scissors + Knife mod?
-
Still no pics yet, but a 25th anniversary Wave.
The external polish is far from Victorinox quality, and has a kind of rippled finish to it. It looks like they've used a mop with compound which has pooled in the stamped lettering and then dragged up the rest of the surface. No significant detriment, but not the finish I was expecting. It has also had the effect of stropping certain areas making sharp external edges even sharper.
However...
.... I didn't realise they'd also given the internal tools a bit of a polish too. Again, not Victorinox quality polishing, but this does give deployment of internal tools a smoother operation than I've experienced from Waves and Charges before. The pliers seem to jam up worse than normal when closing the tool, but I've not identified why that is yet......
Overall, a nice tool, though I do need to give it a little TLC in a couple of areas such as smoothing sharp edges to be 100% happy with it. Bottom line is that I paid less than UK retail for a Wave that is a little nicer in looks and deployment than a standard version. I don't see it as some ultra sexy collectible though, a standard Spirit has a bigger "wow" factor. To me it will just be a slightly more refined user Wave. I just need to find the little removable pocket clip from my other Wave so I can carry it how I want.
-
In the past twenty four hours I have ordered/bought 3 leatherman style ps/cs
Nice... Style with Pliers + Scissors + Knife mod?
That is what I want, and that is maybe what will happen.
Maybe.
now i'll have 2 (or three?) black Style (ps and cs)
2 red (ps and cs)
1 blue (ps)
1 pink (cs)
am I leaving any color of the style out?
-
now i'll have 2 (or three?) black Style (ps and cs)
2 red (ps and cs)
1 blue (ps)
1 pink (cs)
am I leaving any color of the style out?
I've seen an Olive Green Style CS advertised for sale on a couple of sites.
-
now i'll have 2 (or three?) black Style (ps and cs)
2 red (ps and cs)
1 blue (ps)
1 pink (cs)
am I leaving any color of the style out?
I've seen an Olive Green Style CS advertised for sale on a couple of sites.
...sigh
ok now the search begins...
-
Still no pics yet, but a 25th anniversary Wave.
The external polish is far from Victorinox quality, and has a kind of rippled finish to it. It looks like they've used a mop with compound which has pooled in the stamped lettering and then dragged up the rest of the surface. No significant detriment, but not the finish I was expecting. It has also had the effect of stropping certain areas making sharp external edges even sharper.
However...
.... I didn't realise they'd also given the internal tools a bit of a polish too. Again, not Victorinox quality polishing, but this does give deployment of internal tools a smoother operation than I've experienced from Waves and Charges before. The pliers seem to jam up worse than normal when closing the tool, but I've not identified why that is yet......
Overall, a nice tool, though I do need to give it a little TLC in a couple of areas such as smoothing sharp edges to be 100% happy with it. Bottom line is that I paid less than UK retail for a Wave that is a little nicer in looks and deployment than a standard version. I don't see it as some ultra sexy collectible though, a standard Spirit has a bigger "wow" factor. To me it will just be a slightly more refined user Wave. I just need to find the little removable pocket clip from my other Wave so I can carry it how I want.
From the pics I've seen of polished Waves here on MTO, they really look terrific all shiney and polished IMO. I had a ti buck 560x type model years ago that I put a mirror polish on and it was absolutely beautiful (and sold for a nice profit >:D ) so I can certainly appreciate your anniversary Wave :tu:
-
Got my ES4... and let's go All Blacks!!! :clap:
-
I only have one Leatherman... but it´s a Surge...
What else? :D
(https://s-media-cache-ak0.pinimg.com/736x/0f/02/d5/0f02d5019459a915a879e28f55903608.jpg)
-
I only have one Leatherman... but it´s a Surge...
What else? :D
(https://s-media-cache-ak0.pinimg.com/736x/0f/02/d5/0f02d5019459a915a879e28f55903608.jpg)
FLAWLESS VICTORY !! WELCOME TO MTO :tu:
-
I only have one Leatherman... but it´s a Surge...
What else? :D
(https://s-media-cache-ak0.pinimg.com/736x/0f/02/d5/0f02d5019459a915a879e28f55903608.jpg)
DECEMBER CHALLENGES IS LEATHERMAN SURGE. COME HAVE FUN AND YOU MIGHT WIN SWISSTOOL SPIRIT X :salute:
-
(http://i.imgur.com/w6Hd63X.jpg)
-
(http://i.imgur.com/w6Hd63X.jpg)
Looks very nice. Tell us what you think. I have to wait at least till next year to get mine >:(
-
(http://i.imgur.com/w6Hd63X.jpg)
Looks very nice. Tell us what you think. I have to wait at least till next year to get mine >:(
I have hours only a few days. How long I will use it until I can give an opinion.
-
wingman
Sent from my Nexus 4 using Tapatalk
-
ST + Maglite
-
Very nice Loki!
That's us mobile.
Nate
-
I wouldn't use those batteries :P
-
I wouldn't use those batteries :P
Yea Kirkland brand sucks. :D
Seriously though I doubt there is any juice left in those.
-
OHT CAMO + #11 Black
-
Nice!
That's us mobile.
Nate
-
OHT CAMO + #11 Black
Sweet looking. :drool:
-
A Surge and Charge from JBW1
And a Fuse from Capt!
And 2 Micra's from ebay!
(http://images.tapatalk-cdn.com/15/10/16/6ab57a31abbe6bdf39bc8d0773925e00.jpg)
-
Nice haul!
That's us mobile.
Nate
-
Nice haul!
That's us mobile.
Nate
Seriously :tu:
-
Most of them are projects
-
(http://i1320.photobucket.com/albums/u540/garrettxowens/20151017_112427_zpsb32h7pkw.jpg) (http://s1320.photobucket.com/user/garrettxowens/media/20151017_112427_zpsb32h7pkw.jpg.html)
-
I only have one Leatherman... but it´s a Surge...
What else? :D
Nothing. Your life is now complete. :cheers:
-
A Surge and Charge from JBW1
And a Fuse from Capt!
And 2 Micra's from ebay!
(http://images.tapatalk-cdn.com/15/10/16/6ab57a31abbe6bdf39bc8d0773925e00.jpg)
You have a case of Leatheritis. Also known as Leathermantosis in certain severe stages of the disease. :D
-
A Surge and Charge from JBW1
And a Fuse from Capt!
And 2 Micra's from ebay!
(http://images.tapatalk-cdn.com/15/10/16/6ab57a31abbe6bdf39bc8d0773925e00.jpg)
You have a case of Leatheritis. Also known as Leathermantosis in certain severe stages of the disease. :D
I'll gladly except that diagnosis!
I've got SOME other brands...like maybe 2 knifes that are leatherman......maybe......
What can I say? Certain things I'm most definetly a fan boy
-
Mangled G2 Wave for $20 from a member here.
Will try to save what I can for modding in the future or try to restore the scales as the're in a pretty bad shape. :shrug:
-
Mangled G2 Wave for $20 from a member here.
Will try to save what I can for modding in the future or try to restore the scales as the're in a pretty bad shape. :shrug:
Lets see some before and after pics
-
Got my ES4... and let's go All Blacks!!! :clap:
:tu: :tu: :tu:
-
OHT CAMO + #11 Black
Sweet looking. :drool:
+1 :drool:
-
(http://i.imgur.com/w6Hd63X.jpg)
Cool pic. :cheers:
-
I'm a few hours from home on a job assignment and stopped at an outdoor store to see what there inventory was like. Never have I seen a wall of leathermans SAKs and literally every model of Spyderco and Benchmades. I made it out of there with just this. Almost spent my whole paycheck but got out of there with only $40 spent. But I'm glad I finally have a Squirt and a bit kit for my Wave.
(http://images.tapatalk-cdn.com/15/10/30/36a113008eff6be57f3aab28c3b97879.jpg)
-
I'm a few hours from home on a job assignment and stopped at an outdoor store to see what there inventory was like. Never have I seen a wall of leathermans SAKs and literally every model of Spyderco and Benchmades. I made it out of there with just this. Almost spent my whole paycheck but got out of there with only $40 spent. But I'm glad I finally have a Squirt and a bit kit for my Wave.
(http://images.tapatalk-cdn.com/15/10/30/36a113008eff6be57f3aab28c3b97879.jpg)
Glad you made it out with your paycheque intact. :cheers:
I've had that happen to me in a few stores before and it's dangerous.
-
I'm a few hours from home on a job assignment and stopped at an outdoor store to see what there inventory was like. Never have I seen a wall of leathermans SAKs and literally every model of Spyderco and Benchmades. I made it out of there with just this. Almost spent my whole paycheck but got out of there with only $40 spent. But I'm glad I finally have a Squirt and a bit kit for my Wave.
(http://images.tapatalk-cdn.com/15/10/30/36a113008eff6be57f3aab28c3b97879.jpg)
Glad you made it out with your paycheque intact. :cheers:
I've had that happen to me in a few stores before and it's dangerous.
It's a good thing I don't have any stores like that anywhere near me or I'd be in trouble :ahhh
As it is, online shopping is a bad enough temptation, and much easier.
-
I'm a few hours from home on a job assignment and stopped at an outdoor store to see what there inventory was like. Never have I seen a wall of leathermans SAKs and literally every model of Spyderco and Benchmades. I made it out of there with just this. Almost spent my whole paycheck but got out of there with only $40 spent. But I'm glad I finally have a Squirt and a bit kit for my Wave.
(http://images.tapatalk-cdn.com/15/10/30/36a113008eff6be57f3aab28c3b97879.jpg)
Glad you made it out with your paycheque intact. :cheers:
I've had that happen to me in a few stores before and it's dangerous.
It's a good thing I don't have any stores like that anywhere near me or I'd be in trouble :ahhh
As it is, online shopping is a bad enough temptation, and much easier.
No kidding, I would have spent my pay check and sold my soul. Well I would have sold my soul if I had one...LOL!
-
I'm a few hours from home on a job assignment and stopped at an outdoor store to see what there inventory was like. Never have I seen a wall of leathermans SAKs and literally every model of Spyderco and Benchmades. I made it out of there with just this. Almost spent my whole paycheck but got out of there with only $40 spent. But I'm glad I finally have a Squirt and a bit kit for my Wave.
(http://images.tapatalk-cdn.com/15/10/30/36a113008eff6be57f3aab28c3b97879.jpg)
Glad you made it out with your paycheque intact. :cheers:
I've had that happen to me in a few stores before and it's dangerous.
It's a good thing I don't have any stores like that anywhere near me or I'd be in trouble :ahhh
As it is, online shopping is a bad enough temptation, and much easier.
Yup. Having packages in the mail is addictive.
-
Finally got a Charge in titanium. Charge Ti. Our town was having one of those massive highway garage sales and one guy was advertising knives so i had to go have a look.
It's now being carried in place of my Wave. :D
-
Sweet!
-
I'm a few hours from home on a job assignment and stopped at an outdoor store to see what there inventory was like. Never have I seen a wall of leathermans SAKs and literally every model of Spyderco and Benchmades. I made it out of there with just this. Almost spent my whole paycheck but got out of there with only $40 spent. But I'm glad I finally have a Squirt and a bit kit for my Wave.
(http://images.tapatalk-cdn.com/15/10/30/36a113008eff6be57f3aab28c3b97879.jpg)
Glad you made it out with your paycheque intact. :cheers:
I've had that happen to me in a few stores before and it's dangerous.
It's a good thing I don't have any stores like that anywhere near me or I'd be in trouble :ahhh
As it is, online shopping is a bad enough temptation, and much easier.
Yup. Having packages in the mail is addictive.
Very ;)
Sent from my SM-G920R4 using Tapatalk
-
Finally got a Charge in titanium. Charge Ti. Our town was having one of those massive highway garage sales and one guy was advertising knives so i had to go have a look.
It's now being carried in place of my Wave. :D
Of all the charges the Ti is IMO the best one. :tu:
-
I'm a few hours from home on a job assignment and stopped at an outdoor store to see what there inventory was like. Never have I seen a wall of leathermans SAKs and literally every model of Spyderco and Benchmades. I made it out of there with just this. Almost spent my whole paycheck but got out of there with only $40 spent. But I'm glad I finally have a Squirt and a bit kit for my Wave.
(http://images.tapatalk-cdn.com/15/10/30/36a113008eff6be57f3aab28c3b97879.jpg)
Bit kit just added so much capability to your Wave :salute:. I am a fan of the P4 myself tho I do have a PS4. Those little pliers are so fricken handy and the blade is not bad at all. Nicely done making it out of there without much damage at all.
-
Two arrived today for me: the Signal and a Wave.
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20151102_113620_zps61bna7hd.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20151102_113620_zps61bna7hd.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20151102_112343_zps6mv1wdvq.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20151102_112343_zps6mv1wdvq.jpg.html)
Sent from my SM-G920R4 using Tapatalk
-
Any thoughts on the Signal yet?
-
Well so far I actually dig it. Maybe due to the fact that it's new and different :think: I want to do a review, but need more time with it since I'm not a heavy user.
Sent from my SM-G920R4 using Tapatalk
-
You dont need to be a heavy user, just use the tool as you see fit. It sure looks interesting to say the least.
-
You dont need to be a heavy user, just use the tool as you see fit. It sure looks interesting to say the least.
It is interesting. It pairs perfectly with my MechaRogue (or Rogueneer if I carry it) as they have a metal file and other things the Signal lacks. I think I'm going to like it. The hammer is cool too.
Sent from my SM-G920R4 using Tapatalk
-
I bought a Rebar today
-
I bought a Rebar today
(http://i.imgur.com/X4G3TQC.jpg)
-
Nice ones, Kyle. :cheers:
-
Nice ones, Kyle. :cheers:
Thanks buddy :)
Sent from my SM-G920R4 using Tapatalk
-
I bought a Rebar today
(http://i.imgur.com/X4G3TQC.jpg)
I'll get a pic soon
Plus I'll get a pic of the Wingman (my third! lol) and style (my 7th.....oh I have a problem) that I just paid a forum member on here for
-
Oh, and I'll likely use the Rebar for its plier head on a Wave.
-
This PST. That has one handle with no date code and the other 1292. Date codes were introduced by Leatherman in late 1192. So it is interesting to me from a LM historical point of veiw.
-
Oh I didn't include date codes for my latest. Signal is 0815 and Wave is 0109. Funny I got a brand new Wave that's actually almost 7 years old.
Sent from my SM-G920R4 using Tapatalk
-
Oh I didn't include date codes for my latest. Signal is 0815 and Wave is 0109. Funny I got a brand new Wave that's actually almost 7 years old.
Sent from my SM-G920R4 using Tapatalk
That's interesting on the Wave being that date. Where did you buy it from??
-
Oh I didn't include date codes for my latest. Signal is 0815 and Wave is 0109. Funny I got a brand new Wave that's actually almost 7 years old.
Sent from my SM-G920R4 using Tapatalk
That's interesting on the Wave being that date. Where did you buy it from??
I got it on Ebay, but I don't have the seller info handy.
Sent from my SM-G920R4 using Tapatalk
-
Skeletool.
-
Oh I didn't include date codes for my latest. Signal is 0815 and Wave is 0109. Funny I got a brand new Wave that's actually almost 7 years old.
Sent from my SM-G920R4 using Tapatalk
That's interesting on the Wave being that date. Where did you buy it from??
I got it on Ebay, but I don't have the seller info handy.
Sent from my SM-G920R4 using Tapatalk
It appears you got some 'old stock'. That's just weird...
-
Skeletool.
I hope this one works out for ya cap'n. Did you get a good one?
-
Oh I didn't include date codes for my latest. Signal is 0815 and Wave is 0109. Funny I got a brand new Wave that's actually almost 7 years old.
Sent from my SM-G920R4 using Tapatalk
That's interesting on the Wave being that date. Where did you buy it from??
I got it on Ebay, but I don't have the seller info handy.
Sent from my SM-G920R4 using Tapatalk
It appears you got some 'old stock'. That's just weird...
Yeah it's funny a new one that old would still be kicking around. It's a good one though :tu:
Sent from my SM-G920R4 using Tapatalk
-
Oh I didn't include date codes for my latest. Signal is 0815 and Wave is 0109. Funny I got a brand new Wave that's actually almost 7 years old.
Sent from my SM-G920R4 using Tapatalk
That's interesting on the Wave being that date. Where did you buy it from??
I got it on Ebay, but I don't have the seller info handy.
Sent from my SM-G920R4 using Tapatalk
It appears you got some 'old stock'. That's just weird...
Yeah it's funny a new one that old would still be kicking around. It's a good one though :tu:
Sent from my SM-G920R4 using Tapatalk
The Wave is one of my favorite MT's no question. How are you liking it so far?
-
Oh I didn't include date codes for my latest. Signal is 0815 and Wave is 0109. Funny I got a brand new Wave that's actually almost 7 years old.
Sent from my SM-G920R4 using Tapatalk
That's interesting on the Wave being that date. Where did you buy it from??
I got it on Ebay, but I don't have the seller info handy.
Sent from my SM-G920R4 using Tapatalk
It appears you got some 'old stock'. That's just weird...
Yeah it's funny a new one that old would still be kicking around. It's a good one though :tu:
Sent from my SM-G920R4 using Tapatalk
The Wave is one of my favorite MT's no question. How are you liking it so far?
Mine too I think. I haven't actually carried it yet due to the Signal. I'm no stranger to it though as I used to have one. I like its slimness compared to the Charges.
Sent from my SM-G920R4 using Tapatalk
-
I think I bought this Monday. Or Tuesday. I dont know.
(http://i1320.photobucket.com/albums/u540/garrettxowens/Mobile%20Uploads/20151107_105553_zpsf5cvvpvq.jpg) (http://s1320.photobucket.com/user/garrettxowens/media/Mobile%20Uploads/20151107_105553_zpsf5cvvpvq.jpg.html)
(http://i1320.photobucket.com/albums/u540/garrettxowens/Mobile%20Uploads/20151107_105645_zpsroy5rjia.jpg) (http://s1320.photobucket.com/user/garrettxowens/media/Mobile%20Uploads/20151107_105645_zpsroy5rjia.jpg.html)
(http://i1320.photobucket.com/albums/u540/garrettxowens/Mobile%20Uploads/20151107_105713_zps4d5tuju2.jpg) (http://s1320.photobucket.com/user/garrettxowens/media/Mobile%20Uploads/20151107_105713_zps4d5tuju2.jpg.html)
It was only $40 at Lowes, so it was hard to pass up. Actually considered buying two, one to keep and one to hack.
My plan is to pull the pliers from it and put them on a spare Wave I have. Thats the plan anyway.
My LM collection keeps growing, much like my vinyl collection...I think I have a disease.
-
That's probably my very favorite LM. I received my PST2 today and I know I'll catch a clubbing for this but it will not be a user. They're nearly impossible to find NIB and I don't intend on messing it up. It WILL however get plenty of fondling :drool:
What I tool...... I just can't say enough nice about it. If LM still produced these I swear their stock would double. Just... WOW... :D
:multi:
As nice as the original PST series look, I never really liked using them. The pliers was an amazing breakthrough on the multitool front, but hard use required gloves because they were so darn uncomfortable. Once they rolled the handles Leatherman really hit their stride. It always made me curious why they didn't roll the handles initially. Perhaps it was a manufacturing issue at the time? I'm not sure what kind a fabrication equipment they had in the beginning but I would imagine they considered it.
Sent from 9 miles from the face of the sun
-
Got this on the way
(http://i.ebayimg.com/images/g/dLkAAOSw9mFWIyWO/s-l1600.jpg)
-
Got this on the way
(http://i.ebayimg.com/images/g/dLkAAOSw9mFWIyWO/s-l1600.jpg)
Congrats looks like a beauty. :cheers:
-
Got this on the way
(http://i.ebayimg.com/images/g/dLkAAOSw9mFWIyWO/s-l1600.jpg)
Ahhhh the Pulse. Or as I like to call it... The PST 3. Comfortable and locking.
Sent from 9 miles from the face of the sun
-
Nice Pulse Steve!
-
This week I picked up a:
Signal: Just Because
MUT: Love it
Tread: Verdict is still out, Sizing is an issue. I had ti take out 1 full piece (O2 and allen) and the small (the two flat head drive which would most likely be used the most)
I do EDC a Skeletool CX so i have a smaller flat blade.
-
Update, I returned the tread on my way home from work. Mainly because it was bulky and uncomfortable, also I could hear my wife saying "what the hell is that ugly thing on your wrist, you won't be wearing that out with me" LOL
-
(http://i.imgur.com/1JFqE5zh.jpg?2)
-
Skeletool- Home Despot has a mighty fine price on them.
-
Skeletool- Home Despot has a mighty fine price on them.
You can say that again.
(http://i.imgur.com/1i884Pd.jpg)
-
Skeletool- Home Despot has a mighty fine price on them.
You can say that again.
()
Just an FYI...last year I was able to pick up both a Wingman and two Sidekick at Home Depot for $20@ on the Saturday morning following Black Friday. You might want to keep an eye out!
-
Just an FYI for you Friday shoppers...Home Depot has either LM Wingman or Sidekick (sorry, but can't tell from the picture in the online ad) on sale this weekend in Northern California for $20. If you have Home Depots in your area, check their online ad.
-
Newest addition! Bought it along with a pocket clip for my wave...because I am a normal human being that has 2 or more multitools on him ALWAYS. That's normal right?
(http://images.tapatalk-cdn.com/15/11/26/9d8edfae83709036d174adf1aeea0599.jpg)
-
Newest addition! Bought it along with a pocket clip for my wave...because I am a normal human being that has 2 or more multitools on him ALWAYS. That's normal right?
(http://images.tapatalk-cdn.com/15/11/26/9d8edfae83709036d174adf1aeea0599.jpg)
It's normal around here at least ;)
Sent from my SM-G920R4 using Tapatalk
-
Newest addition! Bought it along with a pocket clip for my wave...because I am a normal human being that has 2 or more multitools on him ALWAYS. That's normal right?
(http://images.tapatalk-cdn.com/15/11/26/9d8edfae83709036d174adf1aeea0599.jpg)
Heck yeah, I always carry at least my Micra & my Wave!!!
Sent from my SPH-L720 using Tapatalk
-
Picked up a Rev for $19.88 at Home Depot Black Friday sale.
-
Newest addition! Bought it along with a pocket clip for my wave...because I am a normal human being that has 2 or more multitools on him ALWAYS. That's normal right?
(http://images.tapatalk-cdn.com/15/11/26/9d8edfae83709036d174adf1aeea0599.jpg)
It's normal around here at least ;)
Sent from my SM-G920R4 using Tapatalk
Yep totally normal.
-
Picked up a Rev for $19.88 at Home Depot Black Friday sale.
Not bad, might have to swing by The local HD and have a look.
-
I almost missed finding the Rev at Home Depot because they're marked higher in the tool aisle and they they have them on sale in the front area by the cash registers.
I bought one to give as a gift to a young man that has never owned a real multi tool before but has been watching me for the last five or so years using and taking care of mine and it has always fixed many many problems and he has been looking at mine with yearning eyes. I felt he would respect and protect this tool now as well as he does his phone or better so I think it's time to get a man's tool for a man. Kind of a right of passage into manhood as far as I see it. After looking at the package multiple time over the last few days I wish I had bought one for me to keep as a backup,
-
I was able to get in on the deal that NKlamerus found at Delta Packs before they closed their business. Just arrive today were a Wave for $45.00 and a PS4 for $13.50, along with other items.
-
I was able to get in on the deal that NKlamerus found at Delta Packs before they closed their business. Just arrive today were a Wave for $45.00 and a PS4 for $13.50, along with other items.
That's a good deal. Haven't seen anything like that in Canada for a long while...
-
Leatherman Ukiah
-
Nice on loki :tu:
-
Just in
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_7327_zps7jaggxdw.jpg)
-
Just in
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_7327_zps7jaggxdw.jpg)
Good looking Super Tool Steve :tu:.
-
Just in
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_7327_zps7jaggxdw.jpg)
Good looking Super Tool Steve :tu:.
+1
Sent from my SM-G920R4 using Tapatalk
-
Just in
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_7327_zps7jaggxdw.jpg)
Good looking Super Tool Steve :tu:.
\
+1 :cheers:
-
:cheers: guys
-
Just in
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_7327_zps7jaggxdw.jpg)
Good looking Super Tool Steve :tu:.
\
+1 :cheers:
+2 :cheers: :cheers: :cheers:
-
Home Depot Skeletool
Sent from my Z987 using Tapatalk
-
Just in
(http://i86.photobucket.com/albums/k115/asc67/Multi%20tools%20and%20Knifes/Supertools/IMG_7327_zps7jaggxdw.jpg)
Cool supertoool. 8) Don´t know if it´s the light but i looks almost stonewashed on the picture.
-
Just the light but the BO on one handle is a bit lighter than the other.
-
Funny I see it clearly know :rofl: guess I watched my screen in broad daylight and misstook the bo for stonewashed patina.
-
Leatherman Steens
-
Wow, do my eyes deceive me or is that a steel poking out of the edge of the sheath? If it is, I am amazed, have not seen that is those in a while. That is a Nice Looking Knife!
Sent from my SPH-L720 using Tapatalk
-
Leatherman Steens
Wow very cool knife, and with s30v.
I just got a early x-mas gift for myself. I´v been monitoring an Squirt E4 for some time still in a store thinking it was to expensive but they had a blackfriday sale and i went for it.
Knowing they are getting i little hard to find around here.
Then to pass the freeshipping level I added a small opinel but also a spare prunerblade for Genus. And this is so stupid.Do I have a Genus ?
Offcourse not! :facepalm: Now this genius have to find a Genus to have any use for it. And I know that is not any easier.
A beaten up Genus anyone ? :angel:
-
What is this Leatherman Steens you guys speak of? :think:
-
Leatherman Steens
Wow very cool knife, and with s30v.
I just got a early x-mas gift for myself. I´v been monitoring an Squirt E4 for some time still in a store thinking it was to expensive but they had a blackfriday sale and i went for it.
Knowing they are getting i little hard to find around here.
Then to pass the freeshipping level I added a small opinel but also a spare prunerblade for Genus. And this is so stupid.Do I have a Genus ?
Offcourse not! :facepalm: Now this genius have to find a Genus to have any use for it. And I know that is not any easier.
A beaten up Genus anyone ? :angel:
I bet you could make a nice little folding knife out of that, and it's already predrilled for a thumbstud too :P
-
Leatherman Steens
Is that a "steel" or a diamond coated stick in the side of the sheath?
Sent from my SPH-L720 using Tapatalk
-
My first Mini........love it :tu:
(http://i1175.photobucket.com/albums/r635/HAMERSLAMMER/DSC_0072_zpsmopcdm48.jpg)
(http://i1175.photobucket.com/albums/r635/HAMERSLAMMER/DSC_0073_zpsob4tuekx.jpg)
(http://i1175.photobucket.com/albums/r635/HAMERSLAMMER/DSC_0074_zpsibaeavd2.jpg)
-
My first Mini........love it :tu:
(http://i1175.photobucket.com/albums/r635/HAMERSLAMMER/DSC_0072_zpsmopcdm48.jpg)
(http://i1175.photobucket.com/albums/r635/HAMERSLAMMER/DSC_0073_zpsob4tuekx.jpg)
(http://i1175.photobucket.com/albums/r635/HAMERSLAMMER/DSC_0074_zpsibaeavd2.jpg)
Please post pictures with the tools open! I've never seen a Leatherman mini I'd like to know what they are. But from what I see it looks like a pretty nice tool!
Sent from my SPH-L720 using Tapatalk
-
Mini is a neat tool, good to see you got a sheath to go with it. I had a hard time finding a mini sheath.
-
Ok, more pics :D
(http://i1175.photobucket.com/albums/r635/HAMERSLAMMER/DSC_0080_zpssoemjkvn.jpg)
(http://i1175.photobucket.com/albums/r635/HAMERSLAMMER/DSC_0079_zps4iqzzl3h.jpg)
Yes, I`m very happy to have the original sheath......its a really nice tool but now I need a second one for EDC :D
Sorry about the smartphone pics :-\
-
(http://i1175.photobucket.com/albums/r635/HAMERSLAMMER/DSC_0081_zpsxktesdpg.jpg)
-
Ok, more pics :D
(http://i1175.photobucket.com/albums/r635/HAMERSLAMMER/DSC_0080_zpssoemjkvn.jpg)
(http://i1175.photobucket.com/albums/r635/HAMERSLAMMER/DSC_0079_zps4iqzzl3h.jpg)
Yes, I`m very happy to have the original sheath......its a really nice tool but now I need a second one for EDC :D
Sorry about the smartphone pics :-\
Thank you!
Sent from my SPH-L720 using Tapatalk
-
Sweet Mini GPS12 :tu:
-
Leatherman Steens
Wow very cool knife, and with s30v.
I just got a early x-mas gift for myself. I´v been monitoring an Squirt E4 for some time still in a store thinking it was to expensive but they had a blackfriday sale and i went for it.
Knowing they are getting i little hard to find around here.
Then to pass the freeshipping level I added a small opinel but also a spare prunerblade for Genus. And this is so stupid.Do I have a Genus ?
Offcourse not! :facepalm: Now this genius have to find a Genus to have any use for it. And I know that is not any easier.
A beaten up Genus anyone ? :angel:
Super, Squirt E4 without Radioshark :drool: I need i`t for my collection ;)
-
Leatherman Steens
Is that a "steel" or a diamond coated stick in the side of the sheath?
Sent from my SPH-L720 using Tapatalk
Yes, it a diamond coated stick in the side of the sheath.
-
Leatherman Steens
Wow very cool knife, and with s30v.
I just got a early x-mas gift for myself. I´v been monitoring an Squirt E4 for some time still in a store thinking it was to expensive but they had a blackfriday sale and i went for it.
Knowing they are getting i little hard to find around here.
Then to pass the freeshipping level I added a small opinel but also a spare prunerblade for Genus. And this is so stupid.Do I have a Genus ?
Offcourse not! :facepalm: Now this genius have to find a Genus to have any use for it. And I know that is not any easier.
A beaten up Genus anyone ? :angel:
I bet you could make a nice little folding knife out of that, and it's already predrilled for a thumbstud too :P
:rofl: Why didn´t I thought on that.
-
Leatherman Charge Al - from our very own Al:
(https://lh3.googleusercontent.com/-ZC7JTyKppH4/Vmgu6pkkgiI/AAAAAAAAKVc/MWJL-tvBsBU/s1024-Ic42/Leatherman-Charge-AL-a.jpg)
(https://lh3.googleusercontent.com/-e4v8zId8Ejw/Vmgu6hl9CzI/AAAAAAAAKVs/vyD-aa1KXjw/s1024-Ic42/Leatherman-Charge-AL-b.jpg)
(https://lh3.googleusercontent.com/-PoDIof-3TqY/Vmgu6kKpTdI/AAAAAAAAKVU/EPkiyMGcO48/s1024-Ic42/Leatherman-Charge-AL-c.jpg)
(https://lh3.googleusercontent.com/-PjHbNv4KaKI/Vmgu7PGH55I/AAAAAAAAKVg/_X27M0xodbA/s1024-Ic42/Leatherman-Charge-AL-d.jpg)
(https://lh3.googleusercontent.com/-apl0lt6PcNw/Vmgu7W9ezoI/AAAAAAAAKVk/Dq_DRSWYyyk/s1024-Ic42/Leatherman-Charge-AL-e.jpg)
-
That is such a Nice Looking tool. I have not seen one up close, are those handles powder coated?
Sent from my SPH-L720 using Tapatalk
-
Such a Nice Looking Tool! Are the handles powder coated?
Sent from my SPH-L720 using Tapatalk
-
6061-T6 Hard-Anodized Aluminum
A heat treatable, aero-grade aluminum alloy that is extremely durable yet lightweight. 6061-T6 is used on handle scales in Leatherman multi-tools to reduce weight without losing strength.
Does this help? I suck at chemical stuff. I imagine it's a bit like the Victorinox Alox process, but feels a bit thicker as the coating is still flawless, even if the tool was used quite hard.
-
6061-T6 Hard-Anodized Aluminum
A heat treatable, aero-grade aluminum alloy that is extremely durable yet lightweight. 6061-T6 is used on handle scales in Leatherman multi-tools to reduce weight without losing strength.
Does this help? I suck at chemical stuff. I imagine it's a bit like the Victorinox Alox process, but feels a bit thicker as the coating is still flawless, even if the tool was used quite hard.
Thank you, it seems you know a lot more than I about the composition of the metal. I think I'm going to have to find somebody that has one of those, I want to see how they feel compared to my old school wave. I am wanting my next tool to be one with the exchangeable bits.
Sent from my SPH-L720 using Tapatalk
-
I can vouch for the T6 handles. I used to own an ALx and still miss that tool. I would not hesitate to get an AL someday.
-
Picked up a Rev finally, $18 at Home Depot. This one is destined as a secret santa gift but I so badly want to open it up and check it out further :climber:. Maybe they'll go on sale after the holidays and I'll be able to grab one for myself.
-
My only one: MUT. (http://images.tapatalk-cdn.com/15/12/10/b1e0ff0969380025ff3f7a63a5435355.jpg)
Here is mine taking care of a MacBook Pro repair!
Sent from my iPhone using Tapatalk
-
My only one: MUT. (http://images.tapatalk-cdn.com/15/12/10/b1e0ff0969380025ff3f7a63a5435355.jpg)
Here is mine taking care of a MacBook Pro repair!
Sent from my iPhone using Tapatalk
Nice MUT! That will get the job done for sure :tu:
-
Just got a used Juice Xe6. Really impressed with the fit and finish on this tool. I really dig the way they designed the backsprings. The blades have excellent lockup for slipjoints.
-
My only one: MUT. (http://images.tapatalk-cdn.com/15/12/10/b1e0ff0969380025ff3f7a63a5435355.jpg)
Here is mine taking care of a MacBook Pro repair!
Sent from my iPhone using Tapatalk
Excellent, welcome to the boards. :cheers:
-
My only one: MUT. (http://images.tapatalk-cdn.com/15/12/10/b1e0ff0969380025ff3f7a63a5435355.jpg)
Here is mine taking care of a MacBook Pro repair!
Sent from my iPhone using Tapatalk
WELCOME :tu:
-
Whoo hoo, lucked out at Wally World and found a Leatherman Super tool 300 for $40 and its black oxide. I saw these at academy yesterday in the regular stainless finish and it was around $20 more if I'm not mistaken.
Sent from my electronic multi-tool.
-
Great snag bro!!!!!! :2tu:
-
Nice score bat :tu:
-
Very nice! Congrats man!
-
Whoo hoo, lucked out at Wally World and found a Leatherman Super tool 300 for $40 and its black oxide. I saw these at academy yesterday in the regular stainless finish and it was around $20 more if I'm not mistaken.
Sent from my electronic multi-tool.
Sweet deal
Sent from my SM-G920R4 using Tapatalk
-
Thanks guys, I can't wait to put it to use. It'll be my new EDC in addition to my SAK Pioneer
Sent from my electronic multi-tool.
-
Bought me a Micra today and already managed to cut my finger - this thing is razor sharp (http://images.tapatalk-cdn.com/15/12/17/fe1483602936d3c11a04a53340bec157.jpg)
Now I joined the club of those who own more than one multi. Dangerous path I'm on
------------
Dream. Wish. Leave nothing undone. Repeat.
-
Bought me a Micra today and already managed to cut my finger - this thing is razor sharp (http://images.tapatalk-cdn.com/15/12/17/fe1483602936d3c11a04a53340bec157.jpg)
Now I joined the club of those who own more than one multi. Dangerous path I'm on
------------
Dream. Wish. Leave nothing undone. Repeat.
Congratulations to you my friend, I have owned a micro ever since I found one in the back of an old Toyota truck 10 yes ago that was getting a little mucky. I cleaned it up and ran it across a sharpening stone gently and it is razor sharp, I bought another one as a backup. I always carry a micro and my old school wave. Welcome to the "I Carry Two Club"!
Sent from my SPH-L720 using Tapatalk
-
Bought me a Micra today and already managed to cut my finger - this thing is razor sharp (http://images.tapatalk-cdn.com/15/12/17/fe1483602936d3c11a04a53340bec157.jpg)
Now I joined the club of those who own more than one multi. Dangerous path I'm on
------------
Dream. Wish. Leave nothing undone. Repeat.
Congratulations to you my friend, I have owned a micro ever since I found one in the back of an old Toyota truck 10 yes ago that was getting a little mucky. I cleaned it up and ran it across a sharpening stone gently and it is razor sharp, I bought another one as a backup. I always carry a micro and my old school wave. Welcome to the "I Carry Two Club"!
Sent from my SPH-L720 using Tapatalk
Thanks, buddy
Well to be totally honest I also have a couple of cheap Chinese multis, but who either counts or counts on those?
------------
Dream. Wish. Leave nothing undone. Repeat.
-
Bought me a Micra today and already managed to cut my finger - this thing is razor sharp (http://images.tapatalk-cdn.com/15/12/17/fe1483602936d3c11a04a53340bec157.jpg)
Now I joined the club of those who own more than one multi. Dangerous path I'm on
------------
Dream. Wish. Leave nothing undone. Repeat.
Congrats, I carry mine on my keychain, handy little guy !
-
Bought me a Micra today and already managed to cut my finger - this thing is razor sharp (http://images.tapatalk-cdn.com/15/12/17/fe1483602936d3c11a04a53340bec157.jpg)
Now I joined the club of those who own more than one multi. Dangerous path I'm on
------------
Dream. Wish. Leave nothing undone. Repeat.
Congrats, I carry mine on my keychain, handy little guy !
Thanks, I have a pretty similar plan, though still in doubt: there is a tiny led lenser already, two magnetic keys (one is even bigger than Micra) and plenty of keys that come in various sizes. Choosing from "too much already" and "it won't change much"
------------
Dream. Wish. Leave nothing undone. Repeat.
-
I bought a Leatherman Skeletool CX a few months back, carry it via my belt loop today, most other times in my Skinth Mondo Shield. Got it for $68 AUD.
Sent from my SM-T350 using Tapatalk
-
Leatherman Steens
Were these overseas or just never mass produced?
-
I bought a Leatherman Skeletool CX a few months back, carry it via my belt loop today, most other times in my Skinth Mondo Shield. Got it for $68 AUD.
Sent from my SM-T350 using Tapatalk
You wouldn't happen to know anything about "theedczone" would you? ;)
-
Just picked up this Charge TTI. So far I'm liking it!(http://images.tapatalk-cdn.com/15/12/19/97bc8a57af9669f73769dc3c3a617b37.jpg)
-
Just picked up this Charge TTI. So far I'm liking it!(http://images.tapatalk-cdn.com/15/12/19/97bc8a57af9669f73769dc3c3a617b37.jpg)
Nice :tu:
-
I bought a Leatherman Skeletool CX a few months back, carry it via my belt loop today, most other times in my Skinth Mondo Shield. Got it for $68 AUD.
Sent from my SM-T350 using Tapatalk
You wouldn't happen to know anything about "theedczone" would you? ;)
Yes
Sent from my SM-T350 using Tapatalk
-
I bought a Leatherman Skeletool CX a few months back, carry it via my belt loop today, most other times in my Skinth Mondo Shield. Got it for $68 AUD.
Sent from my SM-T350 using Tapatalk
You wouldn't happen to know anything about "theedczone" would you? ;)
Yes
Sent from my SM-T350 using Tapatalk
I knew I recognized those photos somewhere :D
Awesome page by the way!!!!!!!
Im Duramax_fl on there
-
Just picked up this Charge TTI. So far I'm liking it!(http://images.tapatalk-cdn.com/15/12/19/97bc8a57af9669f73769dc3c3a617b37.jpg)
Nice :tu:
Agreed. Love the looks of the new TTi.
-
Can't go wrong with a Micra. So much utility packed into that small package.
-
A Signal :D. It took a detour in the mail and ended up a couple hundred miles south of here last Friday but finally made it here today! I really like it :tu:.
-
A Signal :D. It took a detour in the mail and ended up a couple hundred miles south of here last Friday but finally made it here today! I really like it :tu:.
Congrats bd :cheers:
-
Glad you like the Signal bdAmmo
Sent from my SM-G920R4 using Tapatalk
-
A Signal :D. It took a detour in the mail and ended up a couple hundred miles south of here last Friday but finally made it here today! I really like it :tu:.
Nice! It looks like the ferro easy to spark too.
Sent from my XT1563 using Tapatalk
-
A Signal :D. It took a detour in the mail and ended up a couple hundred miles south of here last Friday but finally made it here today! I really like it :tu:.
Nice! It looks like the ferro easy to spark too.
Sent from my XT1563 using Tapatalk
Sure is, the ferro works very well. Took me a few minutes but finally managed to get the sparks to land right on the birch bark. It took very little effort to spark, had a fire going in about five minutes or so.
My favorite part of the Signal is the hammer :D. Obviously limited use, but sure works better than smacking something with the side of the plier head or something. Hammers on multi tools are quite useful to me, and the Signal is much more pocketable than the MUT.
There are a couple issues with the Signal that I don't care for much but I'll wait the pass judgement until I've had the tool for more than half a day. :cheers:
-
A Signal :D. It took a detour in the mail and ended up a couple hundred miles south of here last Friday but finally made it here today! I really like it :tu:.
Nice! It looks like the ferro easy to spark too.
Sent from my XT1563 using Tapatalk
Sure is, the ferro works very well. Took me a few minutes but finally managed to get the sparks to land right on the birch bark. It took very little effort to spark, had a fire going in about five minutes or so.
My favorite part of the Signal is the hammer :D. Obviously limited use, but sure works better than smacking something with the side of the plier head or something. Hammers on multi tools are quite useful to me, and the Signal is much more pocketable than the MUT.
There are a couple issues with the Signal that I don't care for much but I'll wait the pass judgement until I've had the tool for more than half a day. :cheers:
I am pleased with the hammer too. Overall the Signal is a good package IMO, especially paired with a well equipped SAK. I look forward to your more in depth thoughts after you've had some time with it
Sent from my SM-G920R4 using Tapatalk
-
LM Micra. Really liking the form factor, it makes an excellent vacation EDC
(http://i.imgur.com/Ci64oRC.jpg)
-
Leatherman Steens
Were these overseas or just never mass produced?
http://www.leatherman.com/steens-121.html
Produced 2007-2009
-
Colored Skeletool
-
Colored Skeletool
Very nice :tu:. I'm surprised you didn't get those in the blister packs though. Are they not offered in that packaging?
-
I bought a Skeletool for $50 at Tractor Supply since it was available locally since Lowe's was out of Rebars. Will be getting the Bit Kit.
The design takes getting used to. I don't like having to leave the tool partially open to use the bit driver. But, it's lightweight and has little to no redundancy when carried with an SAK.
-
Colored Skeletool
Very nice :tu:. I'm surprised you didn't get those in the blister packs though. Are they not offered in that packaging?
:D I have two sets (one in blisters, the second in the boxes) :) Just in blisters pictures obtained worse :whistle:
-
Colored Skeletool
Very nice :tu:. I'm surprised you didn't get those in the blister packs though. Are they not offered in that packaging?
:D I have two sets (one in blisters, the second in the boxes) :) Just in blisters pictures obtained worse :whistle:
And that folks... is how it's done. :D
-
Arrived today. Bought for $29.95 :whistle:
(https://img-fotki.yandex.ru/get/9327/11586821.4/0_1d6e15_893123d1_X5L.jpg)
(https://img-fotki.yandex.ru/get/26827/11586821.4/0_1d6e16_1b00a13e_X5L.jpg)
-
Arrived today. Bought for $29.95 :whistle:
(https://img-fotki.yandex.ru/get/9327/11586821.4/0_1d6e15_893123d1_X5L.jpg)
(https://img-fotki.yandex.ru/get/26827/11586821.4/0_1d6e16_1b00a13e_X5L.jpg)
What a deal :o. Nice Cabela's PST :tu:
-
Arrived today. Bought for $29.95 :whistle:
Very nice, and a killer price !!! :salute: - You don't see many these days.
-
Inspired to get a Surge by all you challengers this month, I like it already, and it seems to like my 96. >:D
Feels big for my freakishly average sized hands, but I'll manage. :)
-
Inspired to get a Surge by all you challengers this month, I like it already, and it seems to like my 96. >:D
Feels big for my freakishly average sized hands, but I'll manage. :)
Not a bad combo that. :tu: :tu:
-
Skeletool. Gift from my wife, which surprised me.
May be my EDC, who knows... I will try to use it in work and life.
-
You will like your shiny now Skeletool, ivanov:
Its also great as an Second Knive if you allready have an SAK..
But also for lonely carry as there are all tools you need mostly in urban enwroiments: Pliers Knife and a werry fast to use Bottleopener :)
it was my first Leatherman and now i use it in combination whit the Victorinox Swisschamp XLT..
Fits perfakly togetter..
-
Inspired to get a Surge by all you challengers this month, I like it already, and it seems to like my 96. >:D
Feels big for my freakishly average sized hands, but I'll manage. :)
Looks great! The BO tools look so much better before the finish wears off on the end caps
-
Inspired to get a Surge by all you challengers this month, I like it already, and it seems to like my 96. >:D
Feels big for my freakishly average sized hands, but I'll manage. :)
Looks great! The BO tools look so much better before the finish wears off on the end caps
Thx NK, congrats on the badge too, enjoyed your quest! Actually after 6 days of carry it's starting to get some patina already. :)
:cheers:
-
BO Wave
(http://i971.photobucket.com/albums/ae191/bdAmmo/image_zpsqzujqemm.jpeg) (http://s971.photobucket.com/user/bdAmmo/media/image_zpsqzujqemm.jpeg.html)
>:D
(http://i971.photobucket.com/albums/ae191/bdAmmo/image_zpsmyvbshtr.jpeg) (http://s971.photobucket.com/user/bdAmmo/media/image_zpsmyvbshtr.jpeg.html)
-
Nice bd :tu:
What you cooking up ?
-
Nice bd :tu:
What you cooking up ?
Not sure yet :think:
Any suggestions?
-
Nice bd :tu:
What you cooking up ?
Not sure yet :think:
Any suggestions?
A skinny hack. :pok:
-
Nice bd :tu:
What you cooking up ?
Not sure yet :think:
Any suggestions?
What's in the container, another Wave ?
-
Nice bd :tu:
What you cooking up ?
Not sure yet :think:
Any suggestions?
What's in the container, another Wave ?
Yes, the Wave I just got today is in the container. It was pretty gunked up, needs a good soaking.
-
Nice bd :tu:
What you cooking up ?
Not sure yet :think:
Any suggestions?
A skinny hack. :pok:
How would I do that with a Wave?
-
Nice bd :tu:
What you cooking up ?
Not sure yet :think:
Any suggestions?
A skinny hack. :pok:
How would I do that with a Wave?
By cutting one of the outside opening sides off.
-
Nice bd :tu:
What you cooking up ?
Not sure yet :think:
Any suggestions?
A skinny hack. :pok:
How would I do that with a Wave?
By cutting one of the outside opening sides off.
Not sure that would work with a Wave the same way it does with a Charge.
-
Nice bd :tu:
What you cooking up ?
Not sure yet :think:
Any suggestions?
A skinny hack. :pok:
How would I do that with a Wave?
By cutting one of the outside opening sides off.
Not sure that would work with a Wave the same way it does with a Charge.
I might have some other plans with the black bits if I get bring myself to do it. :whistle:
-
I might have some other plans with the black bits if I get bring myself to do it. :whistle:
Umm what?
-
I might have some other plans with the black bits if I get bring myself to do it. :whistle:
Umm what?
Obviously having a hard time typing today, I meant to say if I can bring myself to do it.
And by that I meant swap the stainless pieces in the tan Wave pictured, with the black oxide pieces.
-
Nice bd :tu:
What you cooking up ?
Not sure yet :think:
Any suggestions?
A skinny hack. :pok:
How would I do that with a Wave?
By cutting one of the outside opening sides off.
Not sure that would work with a Wave the same way it does with a Charge.
It would work.
-
Got a Wingman for Christmas also a black belt pouch. I really like the one hand open knife blade. I wanted the scissors but don't care for the way they work.
-
OOPS
-
Got a Wingman for Christmas also a black belt pouch. I really like the one hand open knife blade. I wanted the scissors but don't care for the way they work.
Look into re profiling them.
-
I did not win the 1.6B powerball, but did I get a holy grail with this super tool? 0396 production stamp. New with sheath and box.
-
Wow ! Sweet score chrono :cheers:
:drool: :drool: :drool: :drool:
-
I did not win the 1.6B powerball, but did I get a holy grail with this super tool? 0396 production stamp. New with sheath and box.
That's fantastic :drool: Who cares about the power ball anyways (sour grapes :cry: )
-
Honestly, I do not like the locking design of the original ST, but each components of this piece has a very classic look and feel of a pocket knife. I also really dig the clear ruler. It looks so nice. Now I only need a ST200 to fill in the void between this one and the Core + ST300.
Oh, and I paid $40 for it. :D
-
Nice score. :tu: Good looking Super Tool :drool:
-
Nice score. :tu: Good looking Super Tool :drool:
+1
Sent from my SM-G920R4 using Tapatalk
-
Got a Wingman for Christmas also a black belt pouch. I really like the one hand open knife blade. I wanted the scissors but don't care for the way they work.
Look into re profiling them.
What does that mean, swapping it out for a different tool?
-
Got a Wingman for Christmas also a black belt pouch. I really like the one hand open knife blade. I wanted the scissors but don't care for the way they work.
Look into re profiling them.
What does that mean, swapping it out for a different tool?
It means sharpening the edge of the scissors to a new angle.
When you mentioned you don't like the way they work I thought you were referring to how bad they work at cutting things.
-
Got a Wingman for Christmas also a black belt pouch. I really like the one hand open knife blade. I wanted the scissors but don't care for the way they work.
Look into re profiling them.
What does that mean, swapping it out for a different tool?
It means sharpening the edge of the scissors to a new angle.
When you mentioned you don't like the way they work I thought you were referring to how bad they work at cutting things.
I see. No I meant the way they don't open back up after each snip. It's OK to snip once or twice but after that it's a pain
-
:climber:
Check out LINK REMOVED we are making the highest quality belt clip holsters for leatherman waves, surge and charges in the market ! $25 with free shipping is unbeatable ! Please stop by and see what I offer for our leatherman addictions !!
-
Hey Justin. If you have not already can you please contact Grant or a Moderator about advertising on the forum. Thank you.
-
He's too busy spamming the living smurf out of the forum from post one, because that's a proven marketing technique :facepalm:
-
He's too busy spamming the living smurf out of the forum from post one, because that's a proven marketing technique :facepalm:
I see that! Cool product terrible product representative!
-
:climber:
Check out link removedwe are making the highest quality belt clip holsters for leatherman waves, surge and charges in the market ! $25 with free shipping is unbeatable ! Please stop by and see what I offer for our leatherman addictions !!
meh
spam sucks 👎
-
Hey Justin. If you have not already can you please contact Grant or a Moderator about advertising on the forum. Thank you.
Thank you Cap :salute:
-
My latest Leatherman will be the purple Juice XE6, which is on its way. Man, I was late to the collecting scene. Believe it or not, I had chances to buy a Leupold Skeletool CX (http://www.ebay.com/itm/291638487640), and Charge TTi Camo (http://www.ebay.com/itm/131694487940 and http://www.ebay.com/itm/231791018311) for way below retail prices. I did not pull the trigger, and simply let them slip by :facepalm:
-
(http://uploads.tapatalk-cdn.com/20160116/91f30b8ea0628ca0bb9c9be92b7b5898.jpg)
Grabbed a MUT. The coyote brown looks better in person than I thought it would.
-
My latest Leatherman will be the purple Juice XE6, which is on its way. Man, I was late to the collecting scene. Believe it or not, I had chances to buy a Leupold Skeletool CX (http://www.ebay.com/itm/291638487640), and Charge TTi Camo (http://www.ebay.com/itm/131694487940 and http://www.ebay.com/itm/231791018311) for way below retail prices. I did not pull the trigger, and simply let them slip by :facepalm:
I started late too. Part of the thrill is the hunt. Post pics of what you got so far. There was no love for that purple and Leatherman did not have it in their newer XE6.
-
Scored a BO PST from a local collector. Thanks Dennis :cheers: He has 100+ PSTs and dislikes all other models. He wants to thin the herd and said I will gladly help.
-
Scored a BO PST from a local collector. Thanks Dennis :cheers: He has 100+ PSTs and dislikes all other models. He wants to thin the herd and said I will gladly help.
Me too!
-
Scored a BO PST from a local collector. Thanks Dennis :cheers: He has 100+ PSTs and dislikes all other models. He wants to thin the herd and said I will gladly help.
Sweet PST :tu:
-
Scored a BO PST from a local collector. Thanks Dennis :cheers: He has 100+ PSTs and dislikes all other models. He wants to thin the herd and said I will gladly help.
Sweet PST :tu:
+1 :cheers:
-
Just in today a minty BO CC OG Supertool
(http://i.imgur.com/8dasXX2h.jpg)
-
These babies... The Charge Seclusion is stunning. I can't see any color or pattern to enhance the aesthetic value of this model better than Camo because of the cast surface of the titanium scales. As with my BO Surge, MUT, and OHT, I sprayed it with brake disc cleaner and wiped the heck out of it. The cleanup gives the blades a little bit of break-in look. The main blade is a bit stiffer, but I prefer it that way. I will bring it to work (a machine shop) tomorrow for a spray with alcohol.
The Juices are... cute(?). LOL. I like the fit and finish of these little guys. Give Victorinox a run for the money.
-
A Charge Ti was welcome to my collection today. The tool seems brand new, not a spot of rust or wear on an tool. It has two date codes 0206 and 0406, one on each handle. For basically a glorified version of a Wave, I am very pleased with the fit and finish of this tool. The clip point and serrated blades have a smooth, satin-like finish. It seems like Leatherman polished these blades back in the day. Another point making me think of better QC back then is with the fitting of the pocket clip. I pulled the pocket clip of my Charge Camo to avoid damange to the paint job, and installed it on various models (Wavew, Charge ALX, Charge Camo, Surge...). All had some play except the Ti. The clip fits fairly snug into the lock, and it rests nicely inside the cast area on the scale.
The Charge feels more comfortable and secured in my hand than the Wave. It must be because of the scales' texture, and the all around uniform rounding on the handles. This tool is a beautiful product, that oozes of quality on each components. It also looks a lot better in reality than online picture.
I am typing on a tablet. Will add a picture later.
-
Kindly gifted by fellow member David, a Ford branded PST. :D :D :D
(http://i833.photobucket.com/albums/zz256/SAKGuy/Ford%20PST_zpsaijzg8jg.jpg)
-
Sweet PST :tu:
-
Sweet PST :tu:
Yes Thank you!!! :cheers:
It's to pair up with my Ford Soldier (I'll do a pic later).
-
Here are some pics of my recent acquisitions:
- The Charge Ti (as mentioned in previous post) lines up with its brothers TTi and ALX. I really like the Ti, for it is a fancy Wave, and I have no need for the cutting hook. The clip on the Ti was from the TTi. It fits like a charm without a wiggle.
- A pair of Cores in BO and SS: the stainless steel Core was my very first LT.
- Went classic with a OG Wave and PST II: I am pleasantly surprised how smooth these are when opening. The scissors are wicked! First impression when I folded the scissors back in, "that snapping sound... did I just break these scissors?"
- Classic Juice CS4.
-
Here are some pics of my recent acquisitions:
- The Charge Ti (as mentioned in previous post) lines up with its brothers TTi and ALX. I really like the Ti, for it is a fancy Wave, and I have no need for the cutting hook. The clip on the Ti was from the TTi. It fits like a charm without a wiggle.
- A pair of Cores in BO and SS: the stainless steel Core was my very first LT.
- Went classic with a OG Wave and PST II: I am pleasantly surprised how smooth these are when opening. The scissors are wicked! First impression when I folded the scissors back in, "that snapping sound... did I just break these scissors?"
- Classic Juice CS4.
Nice haul
I thought the same thing about the PST II scissors.
Sent from my SM-G920R4 using Tapatalk
-
Leatherman K502x
-
Nice one loki :cheers:
-
My first disco'd Tool, a $8 PST.
Sent from my Z987 using Tapatalk
-
My last LTM - original SUPER TOOL 07/97...
(https://lh3.googleusercontent.com/-ly7z7I8riic/VrODwAekS9I/AAAAAAAAP4A/-TAKGCD1iXk/s800-Ic42/P2042331.JPG)
-
Put this together for work as blades are banned. Not my ideal tool selection, but all I had to make a tool.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20MT%20ONE/DSC05414_zpsagfdd0j8.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20MT%20ONE/DSC05414_zpsagfdd0j8.jpg.html)
-
I snagged a brand new Skeletool from home depot for $20 today... :multi:
-
I snagged a brand new Skeletool from home depot for $20 today... :multi:
I wish my HD still had some. They sold out weeks ago.
-
The Crunch and the OHT are my most recent Leathermans.
(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20160206_130710.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20160206_130710.jpg.html)
-
I snagged a brand new Skeletool from home depot for $20 today... :multi:
I wish my HD still had some. They sold out weeks ago.
This was the last one at mine, it was hidden amidst a bunch of Waves. I would have bought more of them if there were more.
-
My ChargeBlast
(http://uploads.tapatalk-cdn.com/20160209/65829119e2771bf6610a338c4a4aad77.jpg)
Sent from my SM-G920R4 using Tapatalk
-
Now THAT is interesting.
-
Nice one Monz. :tu: :tu: Now make a Charge Rebar aka Charbar. :pok:
-
Thanks guys. Although I just changed it to a Blast-Wave :) I decided I liked that better.
(http://uploads.tapatalk-cdn.com/20160209/b216b493459ad5ec20dcd09467ca15f1.jpg)
(http://uploads.tapatalk-cdn.com/20160209/7a39cecf1c0421c858796764ac20aa4f.jpg)
Sent from my SM-G920R4 using Tapatalk
-
I found this in my brother's drawer, unused since he received it in 2004.
He very kindly let me have it :)
-
Sweet score EZ :cheers:
-
Finally picked up a skeletool yesterday, before that it was probably the wingman
-
Sweet score EZ :cheers:
Thanks Steve. I have great brothers!
-
I found this in my brother's drawer, unused since he received it in 2004.
He very kindly let me have it :)
Oh man that's a sweet one, and unused!!! SOOO JEALOUS! :gimme:
-
My blast came today. It's a very slightly used Cabelas version. In remarkable shape, it seriously looks like it's never been carried. It might have been used a handful of times, not much at all. I snagged it off ebay for $40.
-
My blast came today. It's a very slightly used Cabelas version. In remarkable shape, it seriously looks like it's never been carried. It might have been used a handful of times, not much at all. I snagged it off ebay for $40.
:worthless:
-
Put this together for work as blades are banned. Not my ideal tool selection, but all I had to make a tool.
(http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife%20MT%20ONE/DSC05414_zpsagfdd0j8.jpg) (http://s927.photobucket.com/user/ChadV_2010/media/Knife%20MT%20ONE/DSC05414_zpsagfdd0j8.jpg.html)
whoa... Two Philips?
-
I found this in my brother's drawer, unused since he received it in 2004.
He very kindly let me have it :)
Oh man that's a sweet one, and unused!!! SOOO JEALOUS! :gimme:
Thanks Mercury :)
-
(http://uploads.tapatalk-cdn.com/20160211/fb6ffb0d1541c7969d41787349660489.jpg)
Sent from my SM-G920R4 using Tapatalk
-
(http://uploads.tapatalk-cdn.com/20160211/fb6ffb0d1541c7969d41787349660489.jpg)
Sent from my SM-G920R4 using Tapatalk
Combining my two favorite tools :tu:
-
(http://uploads.tapatalk-cdn.com/20160211/fb6ffb0d1541c7969d41787349660489.jpg)
Sent from my SM-G920R4 using Tapatalk
Combining my two favorite tools :tu:
Yup. They are two of mine as well (along with my Signal, but I'm not messing with tearing that apart), so it's a great setup I think.
Sent from my SM-G920R4 using Tapatalk
-
Lady luck has finally smiled upon me! A Skeletool Leupold was successfully captured! I paid a little more than a CX would cost on Amazon, but I am happy to have this to my collection.
I own a regular Skeletool with combo edge for so long, and have not notice a silvery plated (zinc?) piece which holds the spare bit. I always thought the whole thing is stainless. Until I looked at the Leupold today, when that piece really stands out. Black and green are two of my favorite colors, this is love at first sight :D
The Leupold logo was etched on the rotary side of the pivot of the pliers. That finishing touch is nice.
-
Skeletool Leupold
SideKick first version (with traumatic handles)
Knives - k503x & e307x
-
I really like those Leatherman Knives, but I can't seem to find any here in the states. Where did you get them?
-
Those two are retired I believe. You can get the C33T (straight blade) and C33TX (combo blade) currently. Both have the drivers and bottle opener.
-
I really like those Leatherman Knives, but I can't seem to find any here in the states. Where did you get them?
in different places - in forums, ebay, some in Russia
-
Received this in the mail today.
Very happy except for the rust pits on the main blade and plier pivot the seller forgot to mention :-[
-
BO PST arrived today
(http://i.imgur.com/tf0nDlzh.jpg)
-
That's awesome Steve!!!! :cheers:
-
Thanks buddy :cheers:
-
Got MUT, its the older version with the titanium clip. So far I like it, its already showing some wear (one day of hard use). Its going to look nice someday.
-
Heavy and bulky CORE!!! :multi:
-
Wrapped up the week with the arrivals of another Skeletool Leupold and [drum roll please] a used Surge Camo and a new Mini Tool :D The Surge Camo is in great condition with a few paint chips on one sides, wear on the pliers, but the 4 blades are in mint/ new condition. Got these four for about $220. Being really late to the LT collecting game, I think I was really lucky last week when they popped up for sale. :D :D :D
-
Not exactly a new LM, but will be used on them. >:D
Thanks Loki! :)
-
Picked up a Mini Tool to carry along side my Swisschamp for when I need better pliers. Man this thing is tiny, especially the little blade! Handles extended it is roughly the size of a PST. It has no hard wire cutter and I can't find any date codes inside, so I figure it's early production. I like it :multi:
(http://i1373.photobucket.com/albums/ag371/jowens29649/Mobile%20Uploads/IMG_0016_zpsacdpcg27.jpg) (http://s1373.photobucket.com/user/jowens29649/media/Mobile%20Uploads/IMG_0016_zpsacdpcg27.jpg.html)
(http://i1373.photobucket.com/albums/ag371/jowens29649/Mobile%20Uploads/IMG_0018_zpsbrpbrk14.jpg) (http://s1373.photobucket.com/user/jowens29649/media/Mobile%20Uploads/IMG_0018_zpsbrpbrk14.jpg.html)
(http://i1373.photobucket.com/albums/ag371/jowens29649/Mobile%20Uploads/IMG_0019_zpsktzsspm1.jpg) (http://s1373.photobucket.com/user/jowens29649/media/Mobile%20Uploads/IMG_0019_zpsktzsspm1.jpg.html)
(http://i1373.photobucket.com/albums/ag371/jowens29649/Mobile%20Uploads/IMG_0020_zpsvsvzrntz.jpg) (http://s1373.photobucket.com/user/jowens29649/media/Mobile%20Uploads/IMG_0020_zpsvsvzrntz.jpg.html)
-
Blast
-
My latest is a MUT. I've already put the swisscard scissors in it.
Build date 1013. I've extremely pleased with this one. Now part of my EDC :tu: :tu:
-
My latest is a MUT. I've already put the swisscard scissors in it.
Build date 1013. I've extremely pleased with this one. Now part of my EDC :tu: :tu:
Hey buddy, nice to see you around :) So you like the MUT? I think it looks cool, and would probably like it since I really dig the Signal, but it's supposedly so heavy, which is a big strike for me unfortunately :(
-
My latest is a MUT. I've already put the swisscard scissors in it.
Build date 1013. I've extremely pleased with this one. Now part of my EDC :tu: :tu:
Hey buddy, nice to see you around :) So you like the MUT? I think it looks cool, and would probably like it since I really dig the Signal, but it's supposedly so heavy, which is a big strike for me unfortunately :(
It's a heavy tool but the weight is offset by the functionality and the fact it offers the larger pliers. I gladly carry it on my belt. I think I found my dream tool :drool: :cheers:
-
New to me CORE, got in the mail yesterday!
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160227_125259_zps0j5w2u06.jpg)
I hope to beat on it as much as on my ST300, it looks like it will stack up to tough things like its modern version.
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160227_125723_zpsogadfzd9.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160227_125003_zpsfuoxuq9i.jpg)
So excited :multi:
And I like its looks and shape better than the ST300's...
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160227_130032_zpsejendswz.jpg)
-
P4 :angel:
(http://s25.postimg.org/nwdy985tr/Leatherman_P4_1.jpg)
(http://s25.postimg.org/pf9ce7ce7/Leatherman_P4_2.jpg)
(http://s25.postimg.org/c9tu83iin/Leatherman_P4_3.jpg)
(http://s25.postimg.org/v0vri9d33/Leatherman_P4_4.jpg)
-
My latest is a MUT. I've already put the swisscard scissors in it.
Build date 1013. I've extremely pleased with this one. Now part of my EDC :tu: :tu:
Hey buddy, nice to see you around :) So you like the MUT? I think it looks cool, and would probably like it since I really dig the Signal, but it's supposedly so heavy, which is a big strike for me unfortunately :(
It's a heavy tool but the weight is offset by the functionality and the fact it offers the larger pliers. I gladly carry it on my belt. I think I found my dream tool :drool: :cheers:
Sweet buddy
Sent from my SM-G920R4 using Tapatalk
-
P4 :angel:
The LM Squirt P4 is a great little tool :tu: I really rate the P4/PS4 MTs, in fact a PS4 is currently my only EDC tool/knife. It is so small I don't notice it in my pocket, but it is strong enough for a surprising range of tasks ( I mostly use the pliers and the blade, but swapped from a P4 to a PS4 to see if I would use the scissors more if I had them with me at all times - so far I haven't needed to).
-
:ahhh Been a little off lately but I found and got a Juice KF4 which made me in the Mt mood again.
It feels good can see now why it is a popular model.
Strange that they retired it.
-
Cap Crimper BO PST
(http://i.imgur.com/zkLWnzHh.jpg)
(http://i.imgur.com/3JP0oFRh.jpg?1)
-
:ahhh Been a little off lately but I found and got a Juice KF4 which made me in the Mt mood again.
It feels good can see now why it is a popular model.
Strange that they retired it.
I like the KF4. If it had scissors in place of maybe the serrated blade, it would be a great small all around multi.
Sent from my SM-G920R4 using Tapatalk
-
G'Day,
Got myself a LM Mini-Tool today. Cool little fella.
Pete
-
:ahhh Been a little off lately but I found and got a Juice KF4 which made me in the Mt mood again.
It feels good can see now why it is a popular model.
Strange that they retired it.
I like the KF4. If it had scissors in place of maybe the serrated blade, it would be a great small all around multi.
Sent from my SM-G920R4 using Tapatalk
Yes agree, scissors instead of the serrated blade would make it perfect. I love that it has the diamond coated file.
And pietervn very nice Mini-tool one of the coolest Lm:s in my opinion.
-
Congrats on the Mini pieter :cheers:
-
Cheers guys. :cheers:
It is growing on me
-
This found its way to me recently dated 1000 both sides. Pretty great condition overall with little use if any. Most of the "wear" appears to have come from taking it out of the sheath and being neglected.
-
Might have to start a leap club. ..(http://uploads.tapatalk-cdn.com/20160317/77217f46cb33f12422b46eb324c01f7c.jpg)(http://uploads.tapatalk-cdn.com/20160317/bc12c4d4cce6817350baca54accb16b1.jpg)
Sent from my SAMSUNG-SM-N920A using Tapatalk
-
This found its way to me recently dated 1000 both sides. Pretty great condition overall with little use if any. Most of the "wear" appears to have come from taking it out of the sheath and being neglected.
Nice ! and with the sheath :tu:
:pok:
http://forum.multitool.org/index.php/topic,20415.msg383919.html#msg383919
-
Well let's see. I have a old beat up wave, supertool 300 BO, skeletool and some juices. Guess that's enough for now.
-
Might have to start a leap club. ..(http://uploads.tapatalk-cdn.com/20160317/77217f46cb33f12422b46eb324c01f7c.jpg)(http://uploads.tapatalk-cdn.com/20160317/bc12c4d4cce6817350baca54accb16b1.jpg)
Sent from my SAMSUNG-SM-N920A using Tapatalk
Hop to it. :tu: :tu:
-
This found its way to me recently dated 1000 both sides. Pretty great condition overall with little use if any. Most of the "wear" appears to have come from taking it out of the sheath and being neglected.
Nice ! and with the sheath :tu:
:pok:
http://forum.multitool.org/index.php/topic,20415.msg383919.html#msg383919
Yes, I was very pleased. I rarely get the sheaths and have to look for them afterwards.
-
Got an S2 on ebay. Notice it missing anything? My day: :mail: ??? :-\ :cry: >:(
(http://i765.photobucket.com/albums/xx298/Nets1988/IMG_20160321_141224_394.jpg)
-
So a friend of mine pointed to my MP600 Bluntnose and said one of those would be real handy to have at work or while out camping. Maybe he was trying to give me ideas, because it turns out his birthday is this Friday! So I banded together with a couple of friends and together we paid for a Leatherman Supertool 300 which should arrive tomorrow!
MP600 is nice and all that, but it really is more of an urban tool with that strong design, heavy duty pliers and so on. The Supertool 300 has everything that the MP600 has, plus an awl and a saw. And that means it can work quite well in an urban environment and also as a camp tool.
I'm sure he will be really happy with it!
-
@ Wiseduck, you are very WISE indeed :tu:
Good for you to spread to love too. The ST300 is a terrific tool and will be at home in the city and country.
-
Got an S2 on ebay. Notice it missing anything? My day: :mail: ??? :-\ :cry: >:(
(http://i765.photobucket.com/albums/xx298/Nets1988/IMG_20160321_141224_394.jpg)
Back spring. :think:
-
Got an S2 on ebay. Notice it missing anything? My day: :mail: ??? :-\ :cry: >:(
(http://i765.photobucket.com/albums/xx298/Nets1988/IMG_20160321_141224_394.jpg)
Wow mine too. You LM guys like clubs we should make a spring missing Juice club.
Also on a related note I have been looking for a doner
-
Just got an almost new TTi. I've been spoiled by Sprits, but this thing is absolutely lovely - the ti handles look great. Tempted to replace the crimper pliers with either a standard Wave set, or maybe ones form a Rebar.
-
Also on a related note I have been looking for a doner
Me too. It's nearly lunchtime.
(http://southsea.speedypizza.co.uk/image/cache/data/kebabs/doner_kebab-500x500.png)
:P
-
Cheers guys. :cheers:
It is growing on me
(https://sp.yimg.com/xj/th?id=OIP.M197b3efe54d5f36243ed768db292d93dH0&pid=15.1&P=0&w=300&h=300)
-
Cheers guys. :cheers:
It is growing on me
(https://sp.yimg.com/xj/th?id=OIP.M197b3efe54d5f36243ed768db292d93dH0&pid=15.1&P=0&w=300&h=300)
Wow :facepalm: :ahhh :ahhh :ahhh :rofl: :rofl:
:b2t: The last LM I got was a Wingman :D I was actually surprised by the quality :tu: Since it has a pretty good clip it has had several days in the weekend carry department :cheers:
-
My last darlings... :D
(https://lh3.googleusercontent.com/-Yz-Jx8lZjXk/VvOonnCETJI/AAAAAAAAQMQ/CBwvRzh8xUUu5hvncJeGsmDhKIUMun0GQCCo/s576-Ic42/P3242587.JPG)
-
Very nice Roman, two of my favorites :cheers:
-
Very nice Roman, two of my favorites :cheers:
+1 :tu:
-
Very nice Roman, two of my favorites :cheers:
+1 :tu:
Couple of classics. Nice to see them being carried.
-
Haul for the week: Crunch from eBay, the pair of Pulse and ST200 from local. All are new. I actually found the Pulse and ST200 on eBay, with the seller living about 20 miles from me. A couple msg exchanges, and they were in my hand for $70, 4 hours ago. :D The lock design on the Pulse and ST200 has been bugging me for a while, that they gradually moved to my "must have" list.
(http://i1036.photobucket.com/albums/a441/chronoxxx/crunh-pulse-st200_zpsbqlx2zwn.jpg)
With these two, I think I am only short on the Flair, Squirt models, one or two Juices, Kick, Fuse, and the Styles...and... :facepalm: 66 tools and not enough, this is madness :ahhh :ahhh :ahhh
-
I picked up a Crunch last week..
-
BO BLAST....
(http://i833.photobucket.com/albums/zz256/SAKGuy/BO%20Blast_zpsxg6cobp6.jpg)
-
Haul for the week: Crunch from eBay, the pair of Pulse and ST200 from local. All are new. I actually found the Pulse and ST200 on eBay, with the seller living about 20 miles from me. A couple msg exchanges, and they were in my hand for $70, 4 hours ago. :D The lock design on the Pulse and ST200 has been bugging me for a while, that they gradually moved to my "must have" list.
(http://i1036.photobucket.com/albums/a441/chronoxxx/crunh-pulse-st200_zpsbqlx2zwn.jpg)
With these two, I think I am only short on the Flair, Squirt models, one or two Juices, Kick, Fuse, and the Styles...and... :facepalm: 66 tools and not enough, this is madness :ahhh :ahhh :ahhh
Great score !
-
BO BLAST....
(http://i833.photobucket.com/albums/zz256/SAKGuy/BO%20Blast_zpsxg6cobp6.jpg)
Sweet !!!
-
BO BLAST....
(http://i833.photobucket.com/albums/zz256/SAKGuy/BO%20Blast_zpsxg6cobp6.jpg)
Sweet !!!
Thanks Steve and I appreciate the heads up on it!!!! :cheers:
-
At a big box home improvement store found a REV marked down, (under 19.)
(http://uploads.tapatalk-cdn.com/20160329/f66f99b62fa2807a2d47305aed221152.jpg)
Another view with tools exposed
(http://uploads.tapatalk-cdn.com/20160329/a84e1d9b9bd07407232fba63303bbaa1.jpg)
Could not resist, haven't used yet, hanging in tool bag right now.
*via Tapatalk
-
Bought a used Kf4 off Loki on the trade forums. Just waiting for it to arrive. Wanted something a little smaller for edc. Save my wave for bigger jobs. Found the kf4 has the tools I'd use the most. :)
(http://uploads.tapatalk-cdn.com/20160329/2d76da58dbf9cca32d4004cf30f9f72e.jpg)
-
At a big box home improvement store found a REV marked down, (under 19.)
(http://uploads.tapatalk-cdn.com/20160329/f66f99b62fa2807a2d47305aed221152.jpg)
Another view with tools exposed
(http://uploads.tapatalk-cdn.com/20160329/a84e1d9b9bd07407232fba63303bbaa1.jpg)
Could not resist, haven't used yet, hanging in tool bag right now.
*via Tapatalk
The big box home improvement store where you got that must have hid them under a rock or something. All the local stores around here got rid of those a few months ago. Good find nonetheless.
-
BO Kick
(http://i.imgur.com/u3Gpvn4h.jpg?1)
-
BO Kick
(http://i.imgur.com/u3Gpvn4h.jpg?1)
Very nice congrats.
-
Thanks Mr B :cheers:
-
At a big box home improvement store found a REV marked down, (under 19.)
(http://uploads.tapatalk-cdn.com/20160329/f66f99b62fa2807a2d47305aed221152.jpg)
Another view with tools exposed
(http://uploads.tapatalk-cdn.com/20160329/a84e1d9b9bd07407232fba63303bbaa1.jpg)
Could not resist, haven't used yet, hanging in tool bag right now.
*via Tapatalk
The big box home improvement store where you got that must have hid them under a rock or something. All the local stores around here got rid of those a few months ago. Good find nonetheless.
I do not remember where I was (what city, maybe GR, MI) when found, but it was in late January, and only recently freed from the blister pack. Just about 60 days ago, and they had a few more on the rack, no skeletool though :(
-
Right place, right time, right price.
-
Sweet grab Aloha :tu:
-
I've got to play with it a little but I do like the looks of it. I feel the Skeletool needs a refresh after handling this tool, can you say HAMMER TIME :D
-
I've got to play with it a little but I do like the looks of it. I feel the Skeletool needs a refresh after handling this tool, can you say HAMMER TIME :D
Nice. I do like the fact it has a hammer, and it makes me wish there was one on some of my other MTs as well
-
I use my MUT for work now since it does have a hammer. I have used my other MTs as hammers and no I'm not proud of that :facepalm:. I like it so far but I've only just got it.
-
BO Kick
(http://i.imgur.com/u3Gpvn4h.jpg?1)
That's cool Steve!!!! Besides the clip, it kinda looks like my Blast! Are they similar inside?
-
So a friend of mine pointed to my MP600 Bluntnose and said one of those would be real handy to have at work or while out camping. Maybe he was trying to give me ideas, because it turns out his birthday is this Friday! So I banded together with a couple of friends and together we paid for a Leatherman Supertool 300 which should arrive tomorrow!
MP600 is nice and all that, but it really is more of an urban tool with that strong design, heavy duty pliers and so on. The Supertool 300 has everything that the MP600 has, plus an awl and a saw. And that means it can work quite well in an urban environment and also as a camp tool.
I'm sure he will be really happy with it!
Anyone would really appreciate such a gift & the thought put into it. Good on ya mate! :tu:
-
Picked up from a local gentleman a lot of one PST, one Micra, one Vic Spirit, and one Gerber MP400, all new for $90 :D It was unfortunate the PST did not come with a sheath. I am on a tablet, so no pic :oops:
Though the OHT is bigger and has more design improvement, I think the Gerber MP400 is cooler cosmetically. The size feels good in my hand. Just wish it had spring loaded pliers.
-
Revisiting Leatherman after giving away my Wave last year to a friend. Figured that if I'm going to do this, it's time for a beast that should be able to handle anything. And includes an awl. So welcome BO Surge!
-
So a friend of mine pointed to my MP600 Bluntnose and said one of those would be real handy to have at work or while out camping. Maybe he was trying to give me ideas, because it turns out his birthday is this Friday! So I banded together with a couple of friends and together we paid for a Leatherman Supertool 300 which should arrive tomorrow!
MP600 is nice and all that, but it really is more of an urban tool with that strong design, heavy duty pliers and so on. The Supertool 300 has everything that the MP600 has, plus an awl and a saw. And that means it can work quite well in an urban environment and also as a camp tool.
I'm sure he will be really happy with it!
Anyone would really appreciate such a gift & the thought put into it. Good on ya mate! :tu:
Thank you!
As far as I can tell, it was a hit with him and he immediately wanted to head out to do some camping. I've already scheduled something for next Saturday, I'm just waiting for my friends to get back to me about it, if they're available etc. I love camping.
-
The pockettool #4
Good little tool :whistle:
http://www.leatherman.com/leatherman-4-398.html#start=4
-
My second Blast arrived this day. With extender + bit set and the old style deluxe sheath...
Darn... need to get a pic soon.
-
A Japanese PST in excellent condition :)
-
(http://uploads.tapatalk-cdn.com/20160405/11274f724b2b887a521a78aade9f6840.jpg)
Sent from my SM-G920R4 using Tapatalk
-
Very nice M :tu:
-
Very nice M :tu:
Thanks buddy!
-
Very nice M :tu:
+1 :2tu:
-
Very nice M :tu:
+1 :2tu:
Thanks sir :)
Sent from my SM-G920R4 using Tapatalk
-
(http://uploads.tapatalk-cdn.com/20160405/11274f724b2b887a521a78aade9f6840.jpg)
Sent from my SM-G920R4 using Tapatalk
A japanese Pst. Congrats. Nice looking with the big fonts.
-
(http://uploads.tapatalk-cdn.com/20160405/11274f724b2b887a521a78aade9f6840.jpg)
Sent from my SM-G920R4 using Tapatalk
A japanese Pst. Congrats. Nice looking with the big fonts.
Thanks!
Sent from my SM-G920R4 using Tapatalk
-
I'm waiting for 2 original Juice S2s coming from the USA and 2 PSTIIs coming from Russia :drool:
-
I have been interested in the tool adapter for a while, and finally jumped on a listing for a Supertool + the adapter kit for 20 bucks. I must admit the adapter is rock solid, beatufully made. I wish one day Leatherman considers incorporating this 1/4" drive idea into one of their tool instead of the flat bit drive. The MUT design is a good candidate for it. Imagine all the bit and extension you can add :tu:
-
Just in, Cap crimper SS Supertool
(http://i.imgur.com/gdvAXiDh.jpg)
-
Another sweet Supertool Steve :tu:. Makes me want to carry mine.
Sent from my SM-G920R4 using Tapatalk
-
It's here! :mail:
(http://i.imgur.com/fR72ADO.jpg)
And being me, I couldn't just leave it be... :facepalm:
(http://i.imgur.com/Vyj2IwI.jpg)
-
A ST300 made its way into my van today -
(http://uploads.tapatalk-cdn.com/20160412/0603b91c58512593de84110b6156d1a0.jpg)
*via Tapatalk
-
Congrats. The ST300 is such a beast tool. Lots of great options with that big guy.
-
ST300 = :tu:
-
A ST300 made its way into my van today -
Nice! It's a beast, innit? :D
Now that I think about it, that's the latest Leatherman I've bought, too. I've been doing a lot of home renovation the past few months, and despite wearing a well-equipped tool belt, there was always some stupid little thing that required a tool I didn't have: needle nose plier, wire cutters, a file, a saw, and awl… bet you can see where this is going. ;)
The tool belt has a pocket all the way on the left side, pretty out of the way, that's perfect for a multitool. I got tired of getting my EDC Mts dunked up with plaster/sawdust/paint/whathaveyou, so I bought the Super Tool specifically for the job. Fit that pocket perfectly, and has saves me tons of trips back to my tool bag. It's quite a workhorse. :tu:
-
it is a beast. The most hardy tool I have acquired that is multi-purpose.
The first task I am planning to test it with is the crimper, hoping it will handle my needs over another tool that is specialized.
If it works as planned it save me some (many) redos. :multi:
-
I have a Crunch on its way to me. So Impatient!
-
Got a pair of new Charge Ti and XTi in black oxide. I was so glad to be able to get them at this time without losing an arm and a leg. Also on the way are a Camo Surge and an old style Charge TTi. That brings my Charge collection to 12. :salute: My paycheck on the other hand... :facepalm:
-
Continuing to collect LM blackout models, with the latest being a TTC Ninja Skelly CX. My first damascus blade, as this was within my MT budget, while the damascus SAKs are still too high (and maybe always will be :-\). Really liking the blade pattern and the carbon fiber! :)
Since I am comfortable carrying the Style PS in security area situations I figured I would try a full size version of this type of LM, or at least have a representative in my collection. The only slight glitch so far was the pliers pivot on the blade side was overtightened, but reinstalling the blade with a little blue Loctite solved that easily. Opens and closes very nicely now, better even than my (now broken in) Charge. Hard to say at this point if it will see much pocket time, but it does look like it will be a good companion to several SAK models. :tu:
-
Continuing to collect LM blackout models, with the latest being a TTC Ninja Skelly CX. My first damascus blade, as this was within my MT budget, while the damascus SAKs are still too high (and maybe always will be :-\). Really liking the blade pattern and the carbon fiber! :)
Since I am comfortable carrying the Style PS in security area situations I figured I would try a full size version of this type of LM, or at least have a representative in my collection. The only slight glitch so far was the pliers pivot on the blade side was overtightened, but reinstalling the blade with a little blue Loctite solved that easily. Opens and closes very nicely now, better even than my (now broken in) Charge. Hard to say at this point if it will see much pocket time, but it does look like it will be a good companion to several SAK models. :tu:
sweet ! :tu:
-
Leatherman Charge XTi FPR (with pat.pend)
Leatherman Charge Ti FPR (with pat.pend)
-
Leatherman PST 10th Anniversary 77 of 200
-
Leatherman Fuse FPR (with pat.pend)
Leatherman Original Juice KF4 Yellow
-
Good haul Loki, some nice ones! :cheers:
-
Good haul Loki, some nice ones! :cheers:
+1 and :drool: :drool: :drool:
-
Good haul Loki, some nice ones! :cheers:
+1 and :drool: :drool: :drool:
+2 and :drool: :drool: :drool: :drool: :drool:
-
Good haul Loki, some nice ones! :cheers:
+1 and :drool: :drool: :drool:
+2 and :drool: :drool: :drool: :drool: :drool:
+3 and :drool: x10
Sent from my SM-G920R4 using Tapatalk
-
+1 and :drool: :drool: :drool:
+2 and :drool: :drool: :drool: :drool: :drool:
+3 and :drool: x10
Is it just me or is it getting… err… *moist* in here??? :drool:
-
+1 and :drool: :drool: :drool:
+2 and :drool: :drool: :drool: :drool: :drool:
+3 and :drool: x10
Is it just me or is it getting… err… *moist* in here??? :drool:
:rofl:
That tends to happen here.
Sent from my SM-G920R4 using Tapatalk
-
loki: what does "fpr" mean? And, good haul :tu: My recent haul is pale in comparison: a PST, a Camo Fuse, and a purple Juice XE6
-
Is it just me or is it getting… err… *moist* in here??? :drool:
:rofl:
That tends to happen here.
(http://i.ebayimg.com/00/s/MTE5OVgxNjAw/z/eBoAAOxyVX1RquSR/$T2eC16ZHJHcFFk,q)RTiBRquSQ3KvQ~~60_35.JPG)
-
loki: what does "fpr" mean? And, good haul :tu: My recent haul is pale in comparison: a PST, a Camo Fuse, and a purple Juice XE6
First production run.
-
loki: what does "fpr" mean? And, good haul :tu: My recent haul is pale in comparison: a PST, a Camo Fuse, and a purple Juice XE6
First production run.
Yes, first versions
-
Just got this NIB OG Wave today. I love it! Might become my new EDC.(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20160420_172948.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20160420_172948.jpg.html)
-
Sweet score clown, I carried mine today :tu:
(http://i.imgur.com/e4qH3gVh.jpg)
-
Nice combo! Happen to know what size torx you need to adjust the pivots? Mines a bit stiff. Gonna try a clean/lube and just working it out but I may need to loosen up the driver pivots a little.
-
Just got this NIB OG Wave today. I love it! Might become my new EDC.(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20160420_172948.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20160420_172948.jpg.html)
Very nice score :tu:
Sent from my SM-G920R4 using Tapatalk
-
loki: what does "fpr" mean? And, good haul :tu: My recent haul is pale in comparison: a PST, a Camo Fuse, and a purple Juice XE6
First production run.
Yes, first versions
Oh, I see.
So, is there a certain production date you look for or just "PAT PEND." stamps to determine the tools first production run?
-
Picked up a Wingman at the Home Depot for $25 today. Didn't need one or really have to have one, until I saw the markdown... Then I was like, :multi:
Anyway, walked to lowes next door to se if they had any deals. Nothing really. But I saw this older blister packed Wingman. I haven't ever seen this packaging. But I've had the same Supertool and Supertool 300 for the last 10 years until I recently picked up a Rebar and now this Wingman, so maybe they're normal?
-
Nice combo! Happen to know what size torx you need to adjust the pivots? Mines a bit stiff. Gonna try a clean/lube and just working it out but I may need to loosen up the driver pivots a little.
I believe you will want a couple TS10 bits.
-
Nice combo! Happen to know what size torx you need to adjust the pivots? Mines a bit stiff. Gonna try a clean/lube and just working it out but I may need to loosen up the driver pivots a little.
I believe you will want a couple TS10 bits.
Thank you sir!
-
Got a pair of new Charge Ti and XTi in black oxide. I was so glad to be able to get them at this time without losing an arm and a leg. Also on the way are a Camo Surge and an old style Charge TTi. That brings my Charge collection to 12. :salute: My paycheck on the other hand... :facepalm:
Bit late but WOW what a great haul. Especially the Camo Surge.
-
Leatherman PST 10th Anniversary 77 of 200
:dd:
-
Just got this NIB OG Wave today. I love it! Might become my new EDC.(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20160420_172948.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20160420_172948.jpg.html)
Never gets boring looking at those sheaths. Nice Wave too :tu:
-
Never gets boring looking at those sheaths. Nice Wave too :tu:
Love love LOVE those sheaths. I make sure to keep a few spares around, no telling how much longer LM will keep selling them.
I love that they have a nice, quiet snap instead of #$%^&*( velcro. Also, once they stretch a little, they can carry a variety of tools besides the Old Wave: Pulse, New Wave/Charge (snug, but doable), Fuse/Kick/Blast, Rebar, SwissTool Spirit, Gerber MP400/MP600, SOG PocketPlier Deluxe, just about any 4" tool. :tu:
-
Never gets boring looking at those sheaths. Nice Wave too :tu:
Love love LOVE those sheaths. I make sure to keep a few spares around, no telling how much longer LM will keep selling them.
I love that they have a nice, quiet snap instead of #$%^&*( velcro. Also, once they stretch a little, they can carry a variety of tools besides the Old Wave: Pulse, New Wave/Charge (snug, but doable), Fuse/Kick/Blast, Rebar, SwissTool Spirit, Gerber MP400/MP600, SOG PocketPlier Deluxe, just about any 4" tool. :tu:
I love the OG Wave sheath as well. I need to get a few extra's as liek you said they could just stop selling them any day now.
-
Picked up a Wingman at the Home Depot for $25 today. Didn't need one or really have to have one, until I saw the markdown... Then I was like, :multi:
~
Thank you the heads up. A stop at a Lansing HD yielded a Wingman as well.
(http://uploads.tapatalk-cdn.com/20160421/fdc420b2523daee5cc81771168344777.jpg)
Could not walk away, the force was strong (er)
-
Picked up a Wingman at the Home Depot for $25 today. Didn't need one or really have to have one, until I saw the markdown... Then I was like, :multi:
~
Thank you the heads up. A stop at a Lansing HD yielded a Wingman as well.
(http://uploads.tapatalk-cdn.com/20160421/fdc420b2523daee5cc81771168344777.jpg)
Could not walk away, the force was strong (er)
Damn that's cheep
Sent from my XT1092 using Tapatalk
-
loki: what does "fpr" mean? And, good haul :tu: My recent haul is pale in comparison: a PST, a Camo Fuse, and a purple Juice XE6
First production run.
Yes, first versions
Oh, I see.
So, is there a certain production date you look for or just "PAT PEND." stamps to determine the tools first production run?
I'm looking for all versions of the producted multitools. :facepalm:
For example silver Charge Ti had 4 version:
Patpend + 5star torx + Charge TM on handle
Patpend + 5star torx + Charge R on handle
5star torx
6star torx
Also Charge Ti had others versions:
Camo Black
Camo Silver
Black
etc...
-
I'm looking for all versions of the producted multitools. :facepalm:
For example silver Charge Ti had 4 version:
Patpend + 5star torx + Charge TM on handle
Patpend + 5star torx + Charge R on handle
5star torx
6star torx
Also Charge Ti had others versions:
Camo Black
Camo Silver
Black
etc...
This way madness lies… :ahhh
-
Never gets boring looking at those sheaths. Nice Wave too :tu:
Love love LOVE those sheaths. I make sure to keep a few spares around, no telling how much longer LM will keep selling them.
I love that they have a nice, quiet snap instead of #$%^&*( velcro. Also, once they stretch a little, they can carry a variety of tools besides the Old Wave: Pulse, New Wave/Charge (snug, but doable), Fuse/Kick/Blast, Rebar, SwissTool Spirit, Gerber MP400/MP600, SOG PocketPlier Deluxe, just about any 4" tool. :tu:
I love the OG Wave sheath as well. I need to get a few extra's as liek you said they could just stop selling them any day now.
I read somewhere (Amazon?) the standalone OG Wave sheaths Leatherman sells are not as durable as the older ones, mainly with the belt loop. It seems like it must be the double stiches on the old ones. Are the standalone OG Wave in light brown color? The ones I have (came with the tools) are in lovely dark brown. This sheath and the OG Wave are elegant enough to go with khaki pants and button down shirt without "downgrading" your look :tu:
Arrived today are a pair of new OG Waves: one with the brown leather sheath (99' vintage), other in blister pack with a Brinkmann Legend flashlight and combo nylon sheather (00' vintage). Unfortunately, the Energizer with the 2004 exp date leaked and damaged the nice graphic in the combo pack. I would have loved to keep the blister pack in tact, but had no choice but to open it :rant:
-
Oops. Nothing to see here :)
-
Got a BO wave in the mail at the moment, Excited :drool:
Sent from my XT1092 using Tapatalk
-
Leatherman Crunch.
-
I have a couple out for delivery today :mail:
-
NIB OG Supertool, BO ST200, OG Sheath and back from warranty repair CC ST300
(http://i86.photobucket.com/albums/k115/asc67/DSC07295_zps0i9e301k.jpg) (http://s86.photobucket.com/user/asc67/media/DSC07295_zps0i9e301k.jpg.html)
(http://i86.photobucket.com/albums/k115/asc67/DSC07340_zpszpmhjoo9.jpg) (http://s86.photobucket.com/user/asc67/media/DSC07340_zpszpmhjoo9.jpg.html)
-
You seem to find nice OG Supertools Steve :tu:
Sent from my SM-G920R4 using Tapatalk
-
Thanks M, this one is too nice :) I originally bid on it thinking I would just get it for the sheath and flip the tool. But after getting it, it's in absolutely brand new shape and I can't bring myself to split it up. I think i may flip this one on to someone who want a NIB for their collection. I like to use all my tools and this one is just too nice.
-
Thanks M, this one is too nice :) I originally bid on it thinking I would just get it for the sheath and flip the tool. But after getting it, it's in absolutely brand new shape and I can't bring myself to split it up. I think i may flip this one on to someone who want a NIB for their collection. I like to use all my tools and this one is just too nice.
I'd love it if I would carry it, but I've got to try to get used to it again, which is hard with other tools I like to carry as well.
Sent from my SM-G920R4 using Tapatalk
-
Squirt
-
Never gets boring looking at those sheaths. Nice Wave too :tu:
Love love LOVE those sheaths. I make sure to keep a few spares around, no telling how much longer LM will keep selling them.
I love that they have a nice, quiet snap instead of #$%^&*( velcro. Also, once they stretch a little, they can carry a variety of tools besides the Old Wave: Pulse, New Wave/Charge (snug, but doable), Fuse/Kick/Blast, Rebar, SwissTool Spirit, Gerber MP400/MP600, SOG PocketPlier Deluxe, just about any 4" tool. :tu:
I love the OG Wave sheath as well. I need to get a few extra's as liek you said they could just stop selling them any day now.
What's the quality of the leather like? Tell me it's not as bad as the other modern "leather" sheaths.
-
Juice Xe6
(https://lh3.googleusercontent.com/-FDdhhoCH8co/VyCYKFmXYMI/AAAAAAAAl5s/-4wjeHr70fEz3yvQkd_zyzIdAVlXsjUOQCCo/s1280/upload_-1)
-
Another G1 Wave :)
(http://uploads.tapatalk-cdn.com/20160427/efd5273e16fe2e4acec660e5e0afecf1.jpg)
Sent from my SM-G920R4 using Tapatalk
-
Added a Freestyle to the slowly growing collection. Picked it up from eddie1115 here...
(http://uploads.tapatalk-cdn.com/20160429/3b2fd4baba55a80f9dfbe62339a565c3.jpg)
This place is dangerous to my bank account! Since hanging out here I've picked up a G2 BO Wave, Skeletool, Skeletool CX, a Crater C33x, some Leatherman bits, couple of leather sheaths and a Freestyle! All in the last month or 2....
(http://uploads.tapatalk-cdn.com/20160429/fcc2062e43a968856f9dfb759afb52c1.jpg)
I thought it was happy with my G1 Wave, PST and Supertool 200 (not pictured because my son is borrowing it...)
(http://uploads.tapatalk-cdn.com/20160429/d7bbff9456536ab58dc37f0a80ee38af.jpg)
Sadly, I don't see the trend ending anytime soon... LOL
(http://uploads.tapatalk-cdn.com/20160429/dce9ac6b7f8bfc1ca2c9e6a2ddff4fda.jpg)
Sent from my Nexus 6 using Tapatalk
-
This place is dangerous to my bank account! Since hanging out here I've picked up a G2 BO Wave, Skeletool, Skeletool CX, a Crater C33x, some Leatherman bits, couple of leather sheaths and a Freestyle! All in the last month or 2....
Sadly, I don't see the trend ending anytime soon... LOL
I know, right? :cry: Within this week, I pulled trigger three times:
- A Freestyle (Coalatree version)
- A Sideclip: another item to cross off in my list. Just want to see what the raves are all about. I got it cheap enough, hopefully the thing is in decent shape.
- A Skeletool Leupold: third one :facepalm:
Still keep my eye open for a mint/ new Flair under $60
-
Added a Freestyle to the slowly growing collection. Picked it up from eddie1115 here...
(http://uploads.tapatalk-cdn.com/20160429/3b2fd4baba55a80f9dfbe62339a565c3.jpg)
This place is dangerous to my bank account! Since hanging out here I've picked up a G2 BO Wave, Skeletool, Skeletool CX, a Crater C33x, some Leatherman bits, couple of leather sheaths and a Freestyle! All in the last month or 2....
(http://uploads.tapatalk-cdn.com/20160429/fcc2062e43a968856f9dfb759afb52c1.jpg)
I thought it was happy with my G1 Wave, PST and Supertool 200 (not pictured because my son is borrowing it...)
(http://uploads.tapatalk-cdn.com/20160429/d7bbff9456536ab58dc37f0a80ee38af.jpg)
Sadly, I don't see the trend ending anytime soon... LOL
(http://uploads.tapatalk-cdn.com/20160429/dce9ac6b7f8bfc1ca2c9e6a2ddff4fda.jpg)
Sent from my Nexus 6 using Tapatalk
Nice collection !
The freestyle isn´t loved by everybody but I think it is a good little tool. :tu:
-
Just got this NIB OG Wave today. I love it! Might become my new EDC.(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20160420_172948.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20160420_172948.jpg.html)
Never gets boring looking at those sheaths. Nice Wave too :tu:
That sheath is the bee's knees.
A new Wave would fit in it I am guessing?
-
The new Wave does, but it is tight. I'm sure with time it would fit better??
Sent from my Nexus 7 using Tapatalk
-
That sheath is the bee's knees.
A new Wave would fit in it I am guessing?
Love love LOVE those sheaths. REAL leather, rather than the stuff they usually use. And the best part is, NO VELCRO, just a sturdy – and quiet – snap.
I bought a few, afraid LM would stop selling them, but my current user has been going strong for over ten years now.
Yes, they can stretch over time; a new Wave or Charge is a tight fit, and only "narrow" end down. Mine also fits my SwissTool Spirit, Gerber 400 (blunt nose mod), SOG PocketPlier Deluxe, Leatherman Rebar, Leatherman Blast (and Kick and Fuse), and probably several more mid-size tools.
-
The Sideclip arrived today. I got it $28 shipped. The seller was probably not interested due to multiple rust spots on it, and wanted to flip it quick. This tool turned out to be like 98% unused, blade is factory sharp, all other tools including the pliers show no sign of use. It just has pitting on the handles, and rust + dried lubricant on a few surfaces and joints. I spent almost an hour to clean it, especially on the serration of the pliers. Most of the rust is gone now. I originally thought of using a wired brush in a rotary tool to get rid of the black of the pitting, but eventually scrapped that idea. The pitting does not look too bad, it gives a nice age look to the tool. Date code is 1098 on all four pieces of handles. :tu:
-
My third G1 Wave came today.
(http://uploads.tapatalk-cdn.com/20160506/c1cbb35c5a022f6119f10970a295b6ba.jpg)
(http://uploads.tapatalk-cdn.com/20160506/25ddbf687554c0b33cec7f93559caf37.jpg)
(http://uploads.tapatalk-cdn.com/20160506/0ec379470318a73496eef58f2736e16f.jpg)
Sent from my SM-G920R4 using Tapatalk
-
Older LM Charge Ti (I believe) for $30 at a flea market :D
Edit: After some research here (such an awesome site), it is a Charge SLV, apparently a Costco exclusive some years back.
-
Older LM Charge Ti (I believe) for $30 at a flea market :D
Edit: After some research here (such an awesome site), it is a Charge SLV, apparently a Costco exclusive some years back.
So awesome. :cheers: Is the tool in decent shape? I am envious of your find :ahhh Mine cost me $100 on eBay with evident of small usage on pliers' serration. I wish Leatherman ditch the knurl screws for some sort of low-profile security torx screws. I would have cannibalize my new Wave to restore the SLV.
-
Just picked up another new old stock Juice KF4
Expecting delivery of:
A Sideclip from the UK
A Red Juice S2 from Russia
A Crunch from Tenerife
:climber:
-
Nice haul Biker Bob :tu:
Sent from my SM-G920R4 using Tapatalk
-
I just received a silver LM OHT today.
(http://uploads.tapatalk-cdn.com/20160509/f834b443c89d4668a6445fc37e07100d.jpg)
(http://uploads.tapatalk-cdn.com/20160509/d7f80ea825241f2089bdfe6cd5c5a13b.jpg)
(http://uploads.tapatalk-cdn.com/20160509/1aaed1ad75a76724def63090c82eb533.jpg)
Sent from my SM-G920R4 using Tapatalk
-
I just received a silver LM OHT today.
(http://uploads.tapatalk-cdn.com/20160509/f834b443c89d4668a6445fc37e07100d.jpg)
(http://uploads.tapatalk-cdn.com/20160509/d7f80ea825241f2089bdfe6cd5c5a13b.jpg)
(http://uploads.tapatalk-cdn.com/20160509/1aaed1ad75a76724def63090c82eb533.jpg)
Sent from my SM-G920R4 using Tapatalk
Dude! :o
-
My latest is a Brewzer and I'm very happy with it.
-
I just received a silver LM OHT today.
(http://uploads.tapatalk-cdn.com/20160509/f834b443c89d4668a6445fc37e07100d.jpg)
(http://uploads.tapatalk-cdn.com/20160509/d7f80ea825241f2089bdfe6cd5c5a13b.jpg)
(http://uploads.tapatalk-cdn.com/20160509/1aaed1ad75a76724def63090c82eb533.jpg)
Sent from my SM-G920R4 using Tapatalk
Dude! :o
Sweet! Nice new zombie club avatar too buddy :tu:
-
I just received a silver LM OHT today.
(http://uploads.tapatalk-cdn.com/20160509/f834b443c89d4668a6445fc37e07100d.jpg)
(http://uploads.tapatalk-cdn.com/20160509/d7f80ea825241f2089bdfe6cd5c5a13b.jpg)
(http://uploads.tapatalk-cdn.com/20160509/1aaed1ad75a76724def63090c82eb533.jpg)
Sent from my SM-G920R4 using Tapatalk
Dude! :o
Sweet! Nice new zombie club avatar too buddy :tu:
Thanks dude. :cheers:
-
My latest is a Brewzer and I'm very happy with it.
Hey buddy, good to see you around :D
-
My latest is a Brewzer and I'm very happy with it.
Hey buddy, good to see you around :D
+1 :tu:
-
I just received a silver LM OHT today.
(http://uploads.tapatalk-cdn.com/20160509/f834b443c89d4668a6445fc37e07100d.jpg)
(http://uploads.tapatalk-cdn.com/20160509/d7f80ea825241f2089bdfe6cd5c5a13b.jpg)
(http://uploads.tapatalk-cdn.com/20160509/1aaed1ad75a76724def63090c82eb533.jpg)
Sent from my SM-G920R4 using Tapatalk
Dude! :o
Sweet! Nice new zombie club avatar too buddy :tu:
Thanks dude. :cheers:
You're welcome.....uh, sweety :think:
-
I just received a silver LM OHT today.
(http://uploads.tapatalk-cdn.com/20160509/f834b443c89d4668a6445fc37e07100d.jpg)
(http://uploads.tapatalk-cdn.com/20160509/d7f80ea825241f2089bdfe6cd5c5a13b.jpg)
(http://uploads.tapatalk-cdn.com/20160509/1aaed1ad75a76724def63090c82eb533.jpg)
Sent from my SM-G920R4 using Tapatalk
Dude! :o
Sweet! Nice new zombie club avatar too buddy :tu:
Thanks dude. :cheers:
You're welcome.....uh, sweety :think:
Easy tiger dude.
-
I just received a silver LM OHT today.
(http://uploads.tapatalk-cdn.com/20160509/f834b443c89d4668a6445fc37e07100d.jpg)
(http://uploads.tapatalk-cdn.com/20160509/d7f80ea825241f2089bdfe6cd5c5a13b.jpg)
(http://uploads.tapatalk-cdn.com/20160509/1aaed1ad75a76724def63090c82eb533.jpg)
Sent from my SM-G920R4 using Tapatalk
Dude! :o
Sweet! Nice new zombie club avatar too buddy :tu:
Thanks dude. :cheers:
You're welcome.....uh, sweety :think:
Easy tiger dude.
I better tone down the sweetness, eh dude?
-
I just received a silver LM OHT today.
(http://uploads.tapatalk-cdn.com/20160509/f834b443c89d4668a6445fc37e07100d.jpg)
(http://uploads.tapatalk-cdn.com/20160509/d7f80ea825241f2089bdfe6cd5c5a13b.jpg)
(http://uploads.tapatalk-cdn.com/20160509/1aaed1ad75a76724def63090c82eb533.jpg)
Sent from my SM-G920R4 using Tapatalk
Dude! :o
Sweet! Nice new zombie club avatar too buddy :tu:
Thanks dude. :cheers:
You're welcome.....uh, sweety :think:
Easy tiger dude.
I better tone down the sweetness, eh dude?
(http://tansyrr.com/tansywp/wp-content/uploads/2013/03/tumblr_magtng89bm1rqanv2o1_500.jpg)
-
I just received a silver LM OHT today.
(http://uploads.tapatalk-cdn.com/20160509/f834b443c89d4668a6445fc37e07100d.jpg)
(http://uploads.tapatalk-cdn.com/20160509/d7f80ea825241f2089bdfe6cd5c5a13b.jpg)
(http://uploads.tapatalk-cdn.com/20160509/1aaed1ad75a76724def63090c82eb533.jpg)
Sent from my SM-G920R4 using Tapatalk
Nice one !
-
My latest is a Brewzer and I'm very happy with it.
Hey buddy, good to see you around :D
+1 :tu:
+2 :tu:
-
(http://i1302.photobucket.com/albums/ag137/toddh6/d75463b6-4d62-426b-a559-dbd3218c1761_zpsthssxj05.jpg)
Leatherman Charge ALX BO.
-
^ Nice :cheers:
-
I just received a silver LM OHT today.
(http://uploads.tapatalk-cdn.com/20160509/f834b443c89d4668a6445fc37e07100d.jpg)
(http://uploads.tapatalk-cdn.com/20160509/d7f80ea825241f2089bdfe6cd5c5a13b.jpg)
(http://uploads.tapatalk-cdn.com/20160509/1aaed1ad75a76724def63090c82eb533.jpg)
Sent from my SM-G920R4 using Tapatalk
Nice one !
Thanks!
Sent from my SM-G920R4 using Tapatalk
-
Brand new (to me) Micra dated 4/13-10/10!!
-
Mini Tool
-
A Pulse I picked up on eBay for $25 :tu: The tool selection is in fairly good condition. The tool is broke in, and opens easily. The plier pivot is a bit loose, so the two halves rattle a bit. I can lift one handle to make the plier's tips offset by about 0.5mm. All and all, the all tools are silky smooth to open. Just need a bit TLC to get rid of the rust spots to make it shine. (It's a pity it did not come with the original leather sheath)
-
The Juice S2 is a tool I almost wanted for a long time. I finally found one on eby for a good deal. I just wanted the old style. I don´t like the new design. Looks too odd to me.
Here is the mighty Juice S2 (old version). I still carried it a little around for last few hours and it makes a great feel in the pocket.
(http://i1062.photobucket.com/albums/t489/kampfgockel2/IMG_5141_zps33oeguhl.jpg) (http://s1062.photobucket.com/user/kampfgockel2/media/IMG_5141_zps33oeguhl.jpg.html)
-
(http://i.imgur.com/3TJ8Jn6.jpg)
-
Arrived today is a like new Freestyle CX for $20 on the Bay. Seller probably did not notice the "CX" part of the tool :D Also, a black "new" Wave is on its way. It has both main and serrated blades replaced with damascus ones, made by TTC. Seller claimed like new, I have to wait and see. My first customed Leatherman yet. :salute:
-
A MINT PST from the late 80s as far as I can see. (No date code, Reg code, drop point blade, no hardwire notch)
(I should stop buying tools...its getting out of hand).
-
Nice!
Sent from my Nexus 6 using Tapatalk
-
Pix to follow later this weekend, but I just picked up a used LM Juice KF4 in pretty good condition. I'll clean it up and sharpen the blades, then take a picture or two.
I'm thinking the KF4 and my S2 compliment the different SAKs in my current EDC rotation.
-
BO Fuse
(http://i.imgur.com/YlhyZnDh.jpg)
-
Wave 20th Anniversary Black (Numbered)
Flair
-
I just snagged another New-old-stock OG Supertool with leather sheath off ebay. I paid about $10 more than I wanted to but beers had been drunk and decisions were made...
-
I just snagged another New-old-stock OG Supertool with leather sheath off ebay. I paid about $10 more than I wanted to but beers had been drunk and decisions were made...
Beer and MT/SAK shopping - always a recipe for trouble ;)
Sent from my SM-G920R4 using Tapatalk
-
On the hunt for the perfect keychain tool. Just got this Micra to test out.
(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20160528_103857.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20160528_103857.jpg.html)
-
I just snagged another New-old-stock OG Supertool with leather sheath off ebay. I paid about $10 more than I wanted to but beers had been drunk and decisions were made...
Beer and MT/SAK shopping - always a recipe for trouble ;)
Sent from my SM-G920R4 using Tapatalk
Yup. If I have beer, it's almost guaranteed that either a Multi, SAK, or some sort of Lego will be purchased.
-
Well, my long lost ST200 has been put back in my hands today. Seems I had left it in my son's car and he just had been keeping it in his glove box.
Sure did miss it! I'll get something else to put back in his glove box!
(http://uploads.tapatalk-cdn.com/20160529/f0e4fd1c35ee6c1131f70cafd4344728.jpg)
Sent from my Nexus 7 using Tapatalk
-
My recent acquisitions in the last 3-4 weeks. The non-Leatherman is the large CRKT Razel SS7. Beside it are the Sideclip, Freestyle CX, Charge Camo TTi, OG Wave, and BO Wave with dual Damascus blades. Missing is the Pulse, which was acquired during that time frame.
(http://i1036.photobucket.com/albums/a441/chronoxxx/f2d8c0e3-b9f0-4426-8dfe-830105e72304_zpsmdd9jmzw.jpg)
Close-up of the C-W-W trio
(http://i1036.photobucket.com/albums/a441/chronoxxx/p1_zps98ihgjyx.jpg)
The OG Wave is supposed to be new. There is a big misalignment between the two handle :rant:
(http://i1036.photobucket.com/albums/a441/chronoxxx/p2_zpswnvnpi3h.jpg)
Camo Charge TTi. I wish it were a bead-blast model
(http://i1036.photobucket.com/albums/a441/chronoxxx/f91381b5-a526-49dc-80e1-8ba7271d16de_zpsfzcrhxoz.jpg)
BO Wave with Damascus blades. Seller claimed blades made by TTC. I am surprised that the waviness on the blades can be felt. I have a couple stuffs with Damascus steel, but the profile is not as clear. A slight disappointment is the TTC blades are slightly smaller than Leatherman original blades. The grind on the main blade is small, and the clip point is not as pointy. On the serrated blade, unlike Leatherman onw with one side ground, TTC ground both serrations on both sides with one side heavier than the other. Probably because of the steel. The bright side of this purchase is, the tool is very much like new condition :tu:
(http://i1036.photobucket.com/albums/a441/chronoxxx/p4_zps3k6ntgb9.jpg)
-
:o
That's quite a haul there. Very nice acquisitions! I myself purchased a pulse on ebay just this evening.
-
Wow Chrono . That is an instant collection wright there of rare tools. :cheers:
-
On the hunt for the perfect keychain tool. Just got this Micra to test out.
(http://i441.photobucket.com/albums/qq140/smcclown/Mobile%20Uploads/20160528_103857.jpg) (http://s441.photobucket.com/user/smcclown/media/Mobile%20Uploads/20160528_103857.jpg.html)
Hunt complete.
-
Leatherman Juice S2.
Sent from my iPhone using Tapatalk
-
I bought a like new Pulse yesterday on ebay. I wasn't planning on spending that money but when I see a pulse for $55 I can't control myself.
-
More money spent today on a old-style Juice S2 in grey color, and a Super Tool 200. Both for slightly over $80. The S2 is NIB, the ST200 was claimed to be NWOB. Good thing is the ST200 comes with its original leather sheath :D
This whole collecting thing is an addiction, man. I need help :facepalm:
-
More money spent today on a old-style Juice S2 in grey color, and a Super Tool 200. Both for slightly over $80. The S2 is NIB, the ST200 was claimed to be NWOB. Good thing is the ST200 comes with its original leather sheath :D
This whole collecting thing is an addiction, man. I need help :facepalm:
You came to the wrong place for help my friend :D
Congrats on the ST 200 it's one of my favorites :cheers:
-
You came to the wrong place for help my friend :D
Congrats on the ST 200 it's one of my favorites :cheers:
This is like a drunkard knowing he has problem asks for help from another drunkard while bottling up together :facepalm:
I prefer the Pulse over the ST200 though. The lock is a little too tight for my taste on the ST200. 2nd unit for my collection.
Back to this thread, yeah, I just bought a yellow Juice KF4 and its grey brother back to back within an hour. $94 total for two new cool cats :D
-
My recent acquisitions in the last 3-4 weeks. The non-Leatherman is the large CRKT Razel SS7. Beside it are the Sideclip, Freestyle CX, Charge Camo TTi, OG Wave, and BO Wave with dual Damascus blades. Missing is the Pulse, which was acquired during that time frame.
(http://i1036.photobucket.com/albums/a441/chronoxxx/f2d8c0e3-b9f0-4426-8dfe-830105e72304_zpsmdd9jmzw.jpg)
Close-up of the C-W-W trio
(http://i1036.photobucket.com/albums/a441/chronoxxx/p1_zps98ihgjyx.jpg)
The OG Wave is supposed to be new. There is a big misalignment between the two handle :rant:
(http://i1036.photobucket.com/albums/a441/chronoxxx/p2_zpswnvnpi3h.jpg)
Camo Charge TTi. I wish it were a bead-blast model
(http://i1036.photobucket.com/albums/a441/chronoxxx/f91381b5-a526-49dc-80e1-8ba7271d16de_zpsfzcrhxoz.jpg)
BO Wave with Damascus blades. Seller claimed blades made by TTC. I am surprised that the waviness on the blades can be felt. I have a couple stuffs with Damascus steel, but the profile is not as clear. A slight disappointment is the TTC blades are slightly smaller than Leatherman original blades. The grind on the main blade is small, and the clip point is not as pointy. On the serrated blade, unlike Leatherman onw with one side ground, TTC ground both serrations on both sides with one side heavier than the other. Probably because of the steel. The bright side of this purchase is, the tool is very much like new condition :tu:
(http://i1036.photobucket.com/albums/a441/chronoxxx/p4_zps3k6ntgb9.jpg)
SOON DOUBLE DAMASCUS BLADE ON BLAVE :ahhh :ahhh :ahhh :ahhh
-
This is quite old
(http://i179.photobucket.com/albums/w292/TiTipower/IMG_2510.jpg) (http://s179.photobucket.com/user/TiTipower/media/IMG_2510.jpg.html)
(http://i179.photobucket.com/albums/w292/TiTipower/IMG_2503.jpg) (http://s179.photobucket.com/user/TiTipower/media/IMG_2503.jpg.html)
-
BO CC Fuse
(http://i.imgur.com/PLQQ1m5h.jpg)
-
BO CC Fuse
(http://i.imgur.com/PLQQ1m5h.jpg)
Congrats Steve ! Nice one. :cheers:
-
Another MINI. I havent bought hardly any MT's for a while but I saw this Cabelas logo'd MINI and didnt resist the urge to bid. Put a cheap bid on it and to my surprise won it. :)
-
Just got a Charge ALX. But with some blemishes. The seller wasn´t dishonest just had a little blurry pictures. It´s mostly cosmetic. Some dust and gunk. Some rust mostly on the plierhead. I´m sure I will be able to clean away most of it.
But on one of the scales a name or logo or something have been taken away in very ugly manner.
I don´t need my tools in perfect condition but this is deep, uneven and ugly.
There is also a two deep bites with chunks of metal taken away.
But all tools are in great shape except of the extra bits that seems to been exposed to some corrosive acid.. And it´s a nice pouch that go with it.
What do you guys think I should do with it ?
Sell it, paint it, paint it with a marker, Sand the rest of the black down. Just go with it and have the pocket clip on that hides some of it. .
-
It looks functional. Depends on the cost. Yet a cap crimped head is nice option.
Put it to work and enjoy.
Would say to forward to me for closer inspection but I don't think you would, would ya?
Sent from my iPhone using Tapatalk
-
CORE, first thing I did was adding a pocket clip
(http://i1314.photobucket.com/albums/t562/ThePeacent/CAM01365_zpsikrggcz3.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/CAM01358_zpstu9mqxoc.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/CAM01362_zpsvyaulzsg.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/CAM01353_zpsltooyeci.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/CAM01351_zpsff5ngn7o.jpg)
-
It looks functional. Depends on the cost. Yet a cap crimped head is nice option.
Put it to work and enjoy.
Would say to forward to me for closer inspection but I don't think you would, would ya?
Sent from my iPhone using Tapatalk
I´v cleaned it and removed the rust now. All the tools are in good shape and fully functional. i will keep it.It´s a very good user.
Still a little tempted to remove the black from the scales and have it in silver or blackwashed maybe. When using a dremel with steelbrush to remove a tough rustspot I carefully tried to remove a little black and it seemed easy enough.
But probably I will just put some paint over the spot.
-
Got these today!!!
(http://uploads.tapatalk-cdn.com/20160616/6c85ea2b0b153c3b1b28cc750ff59f4e.jpg)
(http://uploads.tapatalk-cdn.com/20160616/0e465e6961268485d542ba6ae7875345.jpg)
Sent from my Nexus 6 using Tapatalk
-
#14 Charge, a Tti :facepalm: Couldn't help it. Seller said near mint, S30V blade and plier jaws looked unblemished, old titanium scale, $75 BIN... No sheath, no bit kit, no clip... But I have several of them, so no big deal. Got it today, and the darn thing is indeed 99% like new :mail:
Also purchased today is a Japan PST. Main blade looked factory sharp, pliers seem to have just slight rust, so I jumped on the chance for $36. All because you enablers keep showing how cool it is >:( . I hope I am lucky with this PST as with the Charge.
-
These two came in today...
ST300 BO EOD, brand new in box...
(http://uploads.tapatalk-cdn.com/20160620/6fb1457d0b46cd65e007a434ba3fcad7.jpg)(http://uploads.tapatalk-cdn.com/20160620/89edc82095e7eb1f90676e0683846192.jpg)(http://uploads.tapatalk-cdn.com/20160620/ce4706f36532a12730c2b2c0e701141c.jpg)
Used, but nice, ST200...
(http://uploads.tapatalk-cdn.com/20160620/40985f8d0a49076c65db82579fb333b5.jpg)(http://uploads.tapatalk-cdn.com/20160620/fc37260c264b4fc559b3c093cdc8be36.jpg)
.
Sent from my Nexus 6 using Tapatalk
-
Waiting for my rebar :drool:
-
These two came in today...
ST300 BO EOD, brand new in box...
(http://uploads.tapatalk-cdn.com/20160620/6fb1457d0b46cd65e007a434ba3fcad7.jpg)(http://uploads.tapatalk-cdn.com/20160620/89edc82095e7eb1f90676e0683846192.jpg)(http://uploads.tapatalk-cdn.com/20160620/ce4706f36532a12730c2b2c0e701141c.jpg)
Used, but nice, ST200...
(http://uploads.tapatalk-cdn.com/20160620/40985f8d0a49076c65db82579fb333b5.jpg)(http://uploads.tapatalk-cdn.com/20160620/fc37260c264b4fc559b3c093cdc8be36.jpg)
.
Sent from my Nexus 6 using Tapatalk
Nice EOD! :tu:
-
(http://uploads.tapatalk-cdn.com/20160621/bb467a971b5e042d506bccc0e2899b1f.jpg)(http://uploads.tapatalk-cdn.com/20160621/09a662a111b495364706f4977a885e51.jpg)
Sent from my iPhone using Tapatalk
-
(http://uploads.tapatalk-cdn.com/20160621/bb467a971b5e042d506bccc0e2899b1f.jpg)(http://uploads.tapatalk-cdn.com/20160621/09a662a111b495364706f4977a885e51.jpg)
Sent from my iPhone using Tapatalk
BO ST300 goodness! :tu:
-
The Japan PST arrived today :mail: It was surprisingly clean, with a few brownish spots, which I was not sure if they are rust or some sort of dried up fluid, heaviest on the plier serration. I used a 5" wired wheel as a brush and manually brush it off the pliers. Given how old it is, I am amazed at how little use was on this puppy. In fact, I think the only evident of this as used is with the slightly bent tip of the small flat head.
It has the US REG'D TM 1325473, which makes it #6 on the chronology table (http://forum.multitool.org/index.php/topic,5877.0.html). No "JAPAN" stamped anywhere though.
(http://i1036.photobucket.com/albums/a441/chronoxxx/jpst_zpsm4rsq71z.jpg)
I also pulled a trigger for a ST200 today. It should arrive at the same time with a non-Leatherman multi, a SOG Power Play PT-540. I read that the PT-540 is hard to come by, I was lucky to snatch it for $30. :oops:
IMG from eBay
(http://i.ebayimg.com/images/g/KucAAOSw-4BXaKKA/s-l1600.jpg)
-
The Japan PST arrived today :mail: It was surprisingly clean, with a few brownish spots, which I was not sure if they are rust or some sort of dried up fluid, heaviest on the plier serration. I used a 5" wired wheel as a brush and manually brush it off the pliers. Given how old it is, I am amazed at how little use was on this puppy. In fact, I think the only evident of this as used is with the slightly bent tip of the small flat head.
It has the US REG'D TM 1325473, which makes it #6 on the chronology table (http://forum.multitool.org/index.php/topic,5877.0.html). No "JAPAN" stamped anywhere though.
(http://i1036.photobucket.com/albums/a441/chronoxxx/jpst_zpsm4rsq71z.jpg)
I also pulled a trigger for a ST200 today. It should arrive at the same time with a non-Leatherman multi, a SOG Power Play PT-540. I read that the PT-540 is hard to come by, I was lucky to snatch it for $30. :oops:
IMG from eBay
(http://i.ebayimg.com/images/g/KucAAOSw-4BXaKKA/s-l1600.jpg)
Luck find on that PT-540. I had one (before I started collecting, sold it due to sudden need for cash) :facepalm:
I miss it very much :cry:
-
Hey, I'd like to have that SOG for the telecom punch down blades. I've already been thinking of molding an old blade to fit into the large bit holder on a Wave.
-
All very nice finds/purchases. Good thing I have to work otherwise I would be continually trying to track the best deals as well adding another body hunting done bargains.
Sent from my iPhone using Tapatalk
-
Leatherman S2 :angel:
(http://s25.postimg.org/6xk92cem7/Leatherman_S2_1.jpg)
(http://s25.postimg.org/mx2wlwanz/Leatherman_S2_2.jpg)
(http://s25.postimg.org/kpynxz5dr/Leatherman_S2_3.jpg)
(http://s25.postimg.org/usdg0pkan/Leatherman_S2_4.jpg)
(http://s25.postimg.org/3o5tvvqin/Leatherman_S2_5.jpg)
(http://s25.postimg.org/8f5pdwjcv/Leatherman_S2_6.jpg)
-
Leatherman S2 :angel:
(http://s25.postimg.org/6xk92cem7/Leatherman_S2_1.jpg)
(http://s25.postimg.org/mx2wlwanz/Leatherman_S2_2.jpg)
(http://s25.postimg.org/kpynxz5dr/Leatherman_S2_3.jpg)
(http://s25.postimg.org/usdg0pkan/Leatherman_S2_4.jpg)
(http://s25.postimg.org/3o5tvvqin/Leatherman_S2_5.jpg)
(http://s25.postimg.org/8f5pdwjcv/Leatherman_S2_6.jpg)
I like how the colors pop in your pictures :tu:
-
Great pics Maba :cheers:
-
Great pics Maba :cheers:
+1
-
The Japan PST arrived today :mail: It was surprisingly clean, with a few brownish spots, which I was not sure if they are rust or some sort of dried up fluid, heaviest on the plier serration. I used a 5" wired wheel as a brush and manually brush it off the pliers. Given how old it is, I am amazed at how little use was on this puppy. In fact, I think the only evident of this as used is with the slightly bent tip of the small flat head.
It has the US REG'D TM 1325473, which makes it #6 on the chronology table (http://forum.multitool.org/index.php/topic,5877.0.html). No "JAPAN" stamped anywhere though.
(http://i1036.photobucket.com/albums/a441/chronoxxx/jpst_zpsm4rsq71z.jpg)
I also pulled a trigger for a ST200 today. It should arrive at the same time with a non-Leatherman multi, a SOG Power Play PT-540. I read that the PT-540 is hard to come by, I was lucky to snatch it for $30. :oops:
IMG from eBay
(http://i.ebayimg.com/images/g/KucAAOSw-4BXaKKA/s-l1600.jpg)
That Is a great deal on the PT-540. Just curious, what were your search terms to find it?
-
@sLaughterMed: more like the PT-540 found me :D I was browsing items from the seller, and it happened to catch my eye.
http://www.ebay.com/itm/PALADIN-TOOLS-POWER-PLAY-MULTI-TOOL-USED-/231986265631
You see, there was no mention of SOG or PT-540 in the title or description at all. It was available for a whole day before I snatched it. There was even a watcher, did not know why he did not jump on the chance.
-
Saw this for a BIN price I couldn't pass on , I don't really need another PST II ....... but that's how she goes, first your money then your clothes :facepalm:
(http://i.ebayimg.com/images/g/BwcAAOSwOVpXecZ8/s-l1600.jpg)
-
Saw this for a BIN price I couldn't pass on , I don't really need another PST II ....... but that's how she goes, first your money then your clothes :facepalm:
(http://i.ebayimg.com/images/g/BwcAAOSwOVpXecZ8/s-l1600.jpg)
Congrats!!! :cheers:
-
My last LTM. It's a bit unwanted child, but I lile it!
(https://lh3.googleusercontent.com/-VZZ9xpEQj8I/V39CAg8Y7uI/AAAAAAAARMo/l5V2aDbQpMw1pijOLMgAMsuTs8hOi1okQCCo/s512/IMG_20160708_075909.jpg)
-
I got an unmarked PST II yesterday. Should get a few more today, a MUT, Surge, Rebar, and I'm expecting a NIB Kick anytime.
-
(http://i237.photobucket.com/albums/ff210/aberdrew13/20160708_161938_zpsijutvbf5.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20160708_161938_zpsijutvbf5.jpg.html)
-
Some more nice additions :cheers:
-
My acquisition for the last couple weeks
(http://i1036.photobucket.com/albums/a441/chronoxxx/lot_zpsiox1dfui.jpg)
From left to right:
SOG Vision SV68 knife: Have a renewed interest in SOG knife, especially the Seki-made ones. This is the AST-34 blade version.
SwissTool standard
Micra with green paint: really dig this shade of green :tu:
Wingman: this one was unexpected, since I had no plan to get Wingman/ Sidekick at the moment. A chance for such a low price deal presented itself, and I went with it. Impressed with the knife and scissors so far though.
K501X knife: used knife. I like how the mirror finish of the blade still shines thru. This knife has a good, nice heavy feel in the hand, unlike the light weight of the Crater series nowadays.
BO Wave
BO Wave with Cap Crimper
-
Leatherman S2 :angel:
(http://s25.postimg.org/6xk92cem7/Leatherman_S2_1.jpg)
(http://s25.postimg.org/mx2wlwanz/Leatherman_S2_2.jpg)
(http://s25.postimg.org/kpynxz5dr/Leatherman_S2_3.jpg)
(http://s25.postimg.org/usdg0pkan/Leatherman_S2_4.jpg)
(http://s25.postimg.org/3o5tvvqin/Leatherman_S2_5.jpg)
(http://s25.postimg.org/8f5pdwjcv/Leatherman_S2_6.jpg)
I like how the colors pop in your pictures :tu:
My exact thoughts :cheers:
-
I need to get outta here before I start clicking BIN on Ebay :ahhh :ahhh :ahhh
:D
-
Had a Juice KF4 show up today.
-
An unloved Super Tool :cry:
(http://i529.photobucket.com/albums/dd338/syncop8r/Multitools/Super%20Tool/As%20bought/20160714_190319.jpg) (http://s529.photobucket.com/user/syncop8r/media/Multitools/Super%20Tool/As%20bought/20160714_190319.jpg.html)
-
An unloved Super Tool :cry:
Ouch ! That looks like it was "ridden hard and put away wet" more than once :(
-
Picked up a nice PST for a killer price. Nice shape, now I have 2, one unmolested!
(http://uploads.tapatalk-cdn.com/20160714/e828f04cb31722ff3d954a14c654d2fd.jpg)(http://uploads.tapatalk-cdn.com/20160714/a10ec586d1fc1c5f629a3cf633401606.jpg)(http://uploads.tapatalk-cdn.com/20160714/e93d1757c4a53425577119b2210a89e9.jpg)(http://uploads.tapatalk-cdn.com/20160714/e6e686a28e8b8b2e9149e8afbdb85a11.jpg)(http://uploads.tapatalk-cdn.com/20160714/23bebcba5cd26ec3f76be664d3a8e26f.jpg)
Sent from my Nexus 6 using Tapatalk
-
Bit of a bolt from the blue this morning, I didn't order it, I know I checked my bank account and no information on who the sender was.
But I now have an OHT
(http://uploads.tapatalk-cdn.com/20160720/d47502b1afb6acad34dc073587d2fa8e.jpg)
(http://uploads.tapatalk-cdn.com/20160720/0d362094aa486aec6744b7181ded2e1c.jpg)
Sent from my iPhone using Tapatalk
-
Bit of a bolt from the blue this morning, I didn't order it, I know I checked my bank account and no information on who the sender was.
But I now have an OHT
(http://uploads.tapatalk-cdn.com/20160720/d47502b1afb6acad34dc073587d2fa8e.jpg)
(http://uploads.tapatalk-cdn.com/20160720/0d362094aa486aec6744b7181ded2e1c.jpg)
Sent from my iPhone using Tapatalk
You have a secret admirer Smashie :o
Not me BTW :pok:
But if you send it to me I will be your not so secret admirer from a far :whistle:
:D
-
Smashie I see you got my present :whistle:
Kidding and congrats :cheers:
-
Surely the package had a return address??
Sent from my Nexus 6 using Tapatalk
-
Surely the package had a return address??
Sent from my Nexus 6 using Tapatalk
Nope, courier delivered, I'm sure I'll find out soon
Sent from my iPhone using Tapatalk
-
Mystery solved, it was a friend of mine who realised he'd forgotten to put the note in until after the courier collected it :facepalm:
I'm liking it a lot so far :tu:
-
I need better friends!!!
Sent from my Nexus 7 using Tapatalk
-
Surge Ninja Edition
Very first impression was rather good... alright it came pre-rusted, still the tools opened way better than on my stainless Surge. So far so good but I will inspect it more thoroughly when I find some time. The only thing I already noticed was that the Damascene blade lacks the nub, so it does not "lock" when closed.
Anyway, it was on sale and cheaper than my other Surge.
-
I need better friends!!!
Sent from my Nexus 7 using Tapatalk
Yeah me too :D
-
New page banana man dance
:nanadance:
-
Surge Ninja Edition
Very first impression was rather good... alright it came pre-rusted, still the tools opened way better than on my stainless Surge. So far so good but I will inspect it more thoroughly when I find some time. The only thing I already noticed was that the Damascene blade lacks the nub, so it does not "lock" when closed.
Anyway, it was on sale and cheaper than my other Surge.
It looks nice Eth :drool:
-
My latest LMs are actual some sheaths:
Received this one today: large sheath for a Supertool and bit adapter kit. The little cardboard clip on the packaging showed "2000 Leatherman....". Quite solid.
(http://i.ebayimg.com/images/g/XT0AAOSw0fhXi1oR/s-l1600.jpg)
Waiting on these: should fit PST size plus a mini maglite
(http://i.ebayimg.com/images/g/R3IAAOSwbsBXjuqP/s-l1600.jpg)
-
I love the look of the old school sheaths way better than what they offer now :drool: :tu:
-
Bought another Charge today and got a SAK for free. The salesman thought it was a fake. Who am I to argue!!!!!
Was pretty much a steal. Only got a broken scissor. The red one in the middle.
-
Dang! Got beat by 3 seconds!!!!
(http://uploads.tapatalk-cdn.com/20160722/b792698b70a38752476e29009aa72490.jpg)
Sold for $22.50!!!!
Sent from my Nexus 6 using Tapatalk
-
Dang! Got beat by 3 seconds!!!!
Sold for $22.50!!!!
.... and 50 cents. The only way to beat a sniper (or any other bidder) is to bid higher than them. I think most snipers use a computer program to do their bidding for them in the last few seconds, so it is quite common to see the bid price increase dramatically in the last 10 seconds as all the sniper programs go into action.
-
I know. I used Bidnapper alot, but not anymore.
Sent from my Nexus 6 using Tapatalk
-
@zrxoa1: well, I have to come clean, that was me winning that auction :D I did not use any sniping software. My bid was $25 in the last 10 seconds from my desktop.
To me, bidding in the last 10s is a gamble, with the sole purpose of avoiding impulsing bidders riding up the price. Stick to the max you are willing to pay to avoid buyer remorse later on.
-
Dang! Got beat by 3 seconds!!!!
(http://uploads.tapatalk-cdn.com/20160722/b792698b70a38752476e29009aa72490.jpg)
Sold for $22.50!!!!
Sent from my Nexus 6 using Tapatalk
@zrxoa1: well, I have to come clean, that was me winning that auction :D I did not use any snipping software. My bid was $25 in the last 10 seconds from my desktop.
I was watching this one as well just to see how high it went :whistle: :D
-
@zrxoa1: well, I have to come clean, that was me winning that auction :D I did not use any snipping software. My bid was $25 in the last 10 seconds from my desktop.
To me, bidding in the last 10s is a gamble, with the sole purpose of avoiding impulsing bidders riding up the price. Stick to the max you are willing to pay to avoid buyer remorse later on.
LOL, congratulations! Yeah, I might have beat you but with 3 seconds left I tried to put in a $30max bid but lost cell signal in the mountains of TN...
:tu:
Sent from my Nexus 6 using Tapatalk
-
@zrxoa1: well, I have to come clean, that was me winning that auction :D I did not use any snipping software. My bid was $25 in the last 10 seconds from my desktop.
To me, bidding in the last 10s is a gamble, with the sole purpose of avoiding impulsing bidders riding up the price. Stick to the max you are willing to pay to avoid buyer remorse later on.
LOL, congratulations! Yeah, I might have beat you but with 3 seconds left I tried to put in a $30max bid but lost cell signal in the mountains of TN...
:tu:
Sent from my Nexus 6 using Tapatalk
Thanks! Lucky me :D I figured it's the phone thing. For items I really want, I always try to bid at my desktop computer to be in real time :tu:
-
@zrxoa1: well, I have to come clean, that was me winning that auction :D I did not use any snipping software. My bid was $25 in the last 10 seconds from my desktop.
To me, bidding in the last 10s is a gamble, with the sole purpose of avoiding impulsing bidders riding up the price. Stick to the max you are willing to pay to avoid buyer remorse later on.
LOL, congratulations! Yeah, I might have beat you but with 3 seconds left I tried to put in a $30max bid but lost cell signal in the mountains of TN...
:tu:
Sent from my Nexus 6 using Tapatalk
Those mountains are bad for that :D
-
New Wave that Leatherman sent to replace my old one.(http://uploads.tapatalk-cdn.com/20160723/635b32c10bc0eb3ccc0530b034dfb85d.jpg)
Sent from my iPhone using Tapatalk
-
Nice!
Sent from my Nexus 6 using Tapatalk
-
It look nice and shiny :dd:
-
Not for long :whistle:
-
Not for long :whistle:
They are made for working :cheers:
-
I got another Signal today.
-
I got another Signal today.
Looks sweet :tu:
I do not have a Signal yet... for some strange reason, I keep delaying the acquisition :think:
-
I got another Signal today.
Looks sweet :tu:
I do not have a Signal yet... for some strange reason, I keep delaying the acquisition :think:
I got it with the intention of modding it. I'm not so sure what I had in mind will actually work. It's a neat tool.
-
Had a Sideclip and another Micra show up today. They could both use a little TLC.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160724_190815_zps2uowk5cx.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160724_190815_zps2uowk5cx.jpg.html)
-
I got another Signal today.
Looks sweet :tu:
I do not have a Signal yet... for some strange reason, I keep delaying the acquisition :think:
Perhaps you're waiting.... for a Signal :facepalm:
-
Flair... Why? Why did I buy that :facepalm: :D
-
Flair... Why? Why did I buy that :facepalm: :D
They are fancy and everyone loves fancy :D
-
I got another Signal today.
Looks sweet :tu:
I do not have a Signal yet... for some strange reason, I keep delaying the acquisition :think:
Perhaps you're waiting.... for a Signal :facepalm:
::)
:D
Like to see your mod when you get it done Aloha :tu:
-
Had a Sideclip and another Micra show up today. They could both use a little TLC.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160724_190815_zps2uowk5cx.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160724_190815_zps2uowk5cx.jpg.html)
Did you get that off of eBay? Looks familiar...
Sent from my Nexus 6 using Tapatalk
-
Blue coloured Micra!
(http://i1314.photobucket.com/albums/t562/ThePeacent/2016-07-26%2008.48.05_zpssfnlgy14.jpg)
I don't like the added thickness, it just spoils a perfectly slim and thin tool... :facepalm:
(http://i1314.photobucket.com/albums/t562/ThePeacent/2016-07-26%2008.46.13_zpspbc11zbr.jpg)
-
I got another Signal today.
Love the signals. Gonna get myself one very soon
-
Blue coloured Micra!
(http://i1314.photobucket.com/albums/t562/ThePeacent/2016-07-26%2008.48.05_zpssfnlgy14.jpg)
I don't like the added thickness, it just spoils a perfectly slim and thin tool... :facepalm:
(http://i1314.photobucket.com/albums/t562/ThePeacent/2016-07-26%2008.46.13_zpspbc11zbr.jpg)
Still very nice tool though :cheers:
-
New page banana man dance
:nanadance:
-
Had a Sideclip and another Micra show up today. They could both use a little TLC.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160724_190815_zps2uowk5cx.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160724_190815_zps2uowk5cx.jpg.html)
Did you get that off of eBay? Looks familiar...
Sent from my Nexus 6 using Tapatalk
Yep.... http://www.ebay.com/itm/191918212721?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
-
Had a Sideclip and another Micra show up today. They could both use a little TLC.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160724_190815_zps2uowk5cx.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160724_190815_zps2uowk5cx.jpg.html)
Did you get that off of eBay? Looks familiar...
Sent from my Nexus 6 using Tapatalk
Yep.... http://www.ebay.com/itm/191918212721?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT (http://www.ebay.com/itm/191918212721?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
Yep, I saw that auction. Congrats again.
Sent from my Nexus 6 using Tapatalk
-
Thanks. The Sideclip was a little rougher than I thought it was from the auction pictures, but it is all good. Looks like an electrical arc burn on the plier head, and the wire cutters were used on something to hard for them so they are notched. A few of the implements wouldn't budge either, and there appears to be some staining on the blade.. I cleaned up the wire cutters with a diamond file and applied some of my favorite gun oil to the implements and it's not that bad now. Still happy with the purchase, although I'm left wondering if the PST plier head would be a direct swap with the Sideclip.... :think:
Also, I realized that I never shared when I got my Mini-tool. Looks like it was carried a lot and used a little. Most of the wear is on the sheath.
(http://i237.photobucket.com/albums/ff210/aberdrew13/20160715_163407_zpsqv90h4ph.jpg) (http://s237.photobucket.com/user/aberdrew13/media/20160715_163407_zpsqv90h4ph.jpg.html)
-
I can't believe you forgot to mention that you got a :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh
:facepalm:
They really are a neat MT, so compact in design for a full sized set of pliers :cheers:
-
I took the picture the night I got it, but I guess I was too tired to upload it and link it.
-
My recent acquisitions:
- Charge TTi Seclusion 3D from recent Cabela's sale (http://forum.multitool.org/index.php/topic,67447.0.html). I thought of it for a few days, FOMO eventually got me, so I pulled the trigger. So glade I did as this one is sold out (discontinued?). Got the old-scale version to boost. :D
- Charge ALX Stainless: bought used, turned out to be likely brand new
- Wave: another used purchase, which has no evidence of use
- Original Super Tool: new with sheath, in box
- Bit adapter kit: beat zrxoa1 in the auction :D What actually caught my eyes was the tiny Philips screw driver in the kit
I am quite happy with this lot. Besides the "full" sale price of the Cabela's one, others were bought at great prices, which will likely retain, if not increase, their values, if I downsize in the future :tu:
(http://i1036.photobucket.com/albums/a441/chronoxxx/6b30e3cf-cf14-46ed-91f8-120a2abd11a6_zpswdq7szbf.jpg)
-
Looks like Christmas came early at your house :o :D
Looks like a great bunch of MTs and nice accessories to go with them as well :cheers:
-
found a Mini on ebay, $30 happy to have one again (wish I had never got rid of the first one I had)
-
Looks like Christmas came early at your house :o :D
Looks like a great bunch of MTs and nice accessories to go with them as well :cheers:
Thanks, bud! :cheers: One way to keep my MT madness in check is to buy tools as close to new and at lowest price as possible, just to avoid impulse purchases. The reasons I have not had a Flair in my collection yet.
-
found a Mini on ebay, $30 happy to have one again (wish I had never got rid of the first one I had)
Glad you got another :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh detron :cheers: They are an awesome compact carry with a SAK :tu:
-
Looks like Christmas came early at your house :o :D
Looks like a great bunch of MTs and nice accessories to go with them as well :cheers:
Thanks, bud! :cheers: One way to keep my MT madness in check is to buy tools as close to new and at lowest price as possible, just to avoid impulse purchases. The reasons I have not had a Flair in my collection yet.
But you know you need a Flair right :pok: :D
Seems like a great way to go about calming the buying itch :cheers:
-
JPST will soon be mine :tu:
(http://i.ebayimg.com/images/g/VkYAAOSwqfNXj7F~/s-l1600.jpg)
(http://i.ebayimg.com/images/g/4bUAAOSwSv1Xj7Fo/s-l1600.jpg)
-
My recent acquisitions:
- Charge TTi Seclusion 3D from recent Cabela's sale (http://forum.multitool.org/index.php/topic,67447.0.html). I thought of it for a few days, FOMO eventually got me, so I pulled the trigger. So glade I did as this one is sold out (discontinued?). Got the old-scale version to boost. :D
- Charge ALX Stainless: bought used, turned out to be likely brand new
- Wave: another used purchase, which has no evidence of use
- Original Super Tool: new with sheath, in box
- Bit adapter kit: beat zrxoa1 in the auction :D What actually caught my eyes was the tiny Philips screw driver in the kit
I am quite happy with this lot. Besides the "full" sale price of the Cabela's one, others were bought at great prices, which will likely retain, if not increase, their values, if I downsize in the future :tu:
(http://i1036.photobucket.com/albums/a441/chronoxxx/6b30e3cf-cf14-46ed-91f8-120a2abd11a6_zpswdq7szbf.jpg)
Congrats again ya weasel!!!! LOL
Sent from my Nexus 6 using Tapatalk
-
(http://i1314.photobucket.com/albums/t562/ThePeacent/CAM03113_zpso50ldyur.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/CAM03120_zps19ftljpk.jpg)
...liking it so much I'm drooling over coloured versions, but they're so expensive here! :twak:
-
Just grabbed two used Leatherman Micras from ebay. Random selection from a large lot. I got one dated to 2004, and the other 1997, both are dirty in the pivots, but blades and scissors are sharp, springs strong. Tweezers in both needed a bit of tweaking.
I was tossing up between Juices, Squirts, or otherwise.. came across these and with shipping paid $14 for two.. so what the heck. I'm really liking them a lot so far. I also just ordered a replacement Sidekick to the one I lost. I think I'll drop one of its tools in favor of the package opener from my Wingman.
(http://i.imgur.com/1QZKiuX.jpg)
(http://i.imgur.com/IXVGKUJ.jpg)
I'll be shooting for a Rebar or Skeletool CX next. A Wave would be super awesome too.
-
Congrats ! Micras Rock :cheers:
-
A Leatherman Mini arrived today :dd:
-
Two landed on Saturday morning, first time I've had to post a picture.
The new Surge and the Rebar EDC
(http://uploads.tapatalk-cdn.com/20160801/9a9c1ceb26f1c15c06696140f21c395f.jpg)
Sent from my iPhone using Tapatalk
-
My new Wave (okay, its my third >:D) arrived today. I traded my Charge tti for it. :facepalm:
Probably crazy but I just can't get along with the Charge and really prefer the wave.
No rubbing scales, no gut hook, just an elegant and extremely useful tool.
-
Some very nice latest LM guys :dd:
-
My new Wave (okay, its my third >:D) arrived today. I traded my Charge tti for it. :facepalm:
Probably crazy but I just can't get along with the Charge and really prefer the wave.
No rubbing scales, no gut hook, just an elegant and extremely useful tool.
Ill trade you my wave for another charge tti! Lol.. I cant get along without my charge, not that I couldnt replace it with a wave. Its just all mental for me.
Sent from my iPhone using Tapatalk
-
My new Wave (okay, its my third >:D) arrived today. I traded my Charge tti for it. :facepalm:
Probably crazy but I just can't get along with the Charge and really prefer the wave.
No rubbing scales, no gut hook, just an elegant and extremely useful tool.
Ill trade you my wave for another charge tti! Lol.. I cant get along without my charge, not that I couldnt replace it with a wave. Its just all mental for me.
Sent from my iPhone using Tapatalk
Thats what caused the problem in the first place, a mental problem :D
My OCD just wouldn't let the rubbing scales go. If I had another I would trade you :pok:
-
Here are my latest two that I got early in July after I started in the Supertool challenge: a Rebar and my 4th G1 Wave.
(http://uploads.tapatalk-cdn.com/20160802/da751c1c206634640e3cf681adb6ce5a.jpg)
(http://uploads.tapatalk-cdn.com/20160802/c80bb9aa72ac8bbe31b7c38acb4d5070.jpg)
(http://uploads.tapatalk-cdn.com/20160802/985124b6c6cb387c9bf4e5c6e7142c91.jpg)
Sent from my SM-G920R4 using Tapatalk
-
Some nice new scores :cheers:
-
Thanks Steve :)
Sent from my SM-G920R4 using Tapatalk
-
Here are my latest two that I got early in July after I started in the Supertool challenge: a Rebar and my 4th G1 Wave.
(http://uploads.tapatalk-cdn.com/20160802/da751c1c206634640e3cf681adb6ce5a.jpg)
(http://uploads.tapatalk-cdn.com/20160802/c80bb9aa72ac8bbe31b7c38acb4d5070.jpg)
(http://uploads.tapatalk-cdn.com/20160802/985124b6c6cb387c9bf4e5c6e7142c91.jpg)
Sent from my SM-G920R4 using Tapatalk
Those are two very nice finds, and you waited through the challenge before fondling, WOW! I am impressed.
Sent from my iPhone using Tapatalk
-
Here are my latest two that I got early in July after I started in the Supertool challenge: a Rebar and my 4th G1 Wave.
(http://uploads.tapatalk-cdn.com/20160802/da751c1c206634640e3cf681adb6ce5a.jpg)
(http://uploads.tapatalk-cdn.com/20160802/c80bb9aa72ac8bbe31b7c38acb4d5070.jpg)
(http://uploads.tapatalk-cdn.com/20160802/985124b6c6cb387c9bf4e5c6e7142c91.jpg)
Sent from my SM-G920R4 using Tapatalk
Those are two very nice finds, and you waited through the challenge before fondling, WOW! I am impressed.
Sent from my iPhone using Tapatalk
Ha, I didn't wait to fondle, at least a couple times ;) Just didn't carry them, but I'm fixing that now :)
Sent from my SM-G920R4 using Tapatalk
-
Here are my latest two that I got early in July after I started in the Supertool challenge: a Rebar and my 4th G1 Wave.
(http://uploads.tapatalk-cdn.com/20160802/da751c1c206634640e3cf681adb6ce5a.jpg)
(http://uploads.tapatalk-cdn.com/20160802/c80bb9aa72ac8bbe31b7c38acb4d5070.jpg)
(http://uploads.tapatalk-cdn.com/20160802/985124b6c6cb387c9bf4e5c6e7142c91.jpg)
Sent from my SM-G920R4 using Tapatalk
Those are two very nice finds, and you waited through the challenge before fondling, WOW! I am impressed.
Sent from my iPhone using Tapatalk
Ha, I didn't wait to fondle, at least a couple times ;) Just didn't carry them, but I'm fixing that now :)
Sent from my SM-G920R4 using Tapatalk
Very nice Monrogue :dd: Carry in good health :cheers:
-
Here are my latest two that I got early in July after I started in the Supertool challenge: a Rebar and my 4th G1 Wave.
(http://uploads.tapatalk-cdn.com/20160802/da751c1c206634640e3cf681adb6ce5a.jpg)
(http://uploads.tapatalk-cdn.com/20160802/c80bb9aa72ac8bbe31b7c38acb4d5070.jpg)
(http://uploads.tapatalk-cdn.com/20160802/985124b6c6cb387c9bf4e5c6e7142c91.jpg)
Sent from my SM-G920R4 using Tapatalk
Those are two very nice finds, and you waited through the challenge before fondling, WOW! I am impressed.
Sent from my iPhone using Tapatalk
Ha, I didn't wait to fondle, at least a couple times ;) Just didn't carry them, but I'm fixing that now :)
Sent from my SM-G920R4 using Tapatalk
Very nice Monrogue :dd: Carry in good health :cheers:
:cheers:
Sent from my SM-G920R4 using Tapatalk
-
I can't be 100% sure, but I think my latest Leatherman was a Japanese PST in September 2010. It came from David on here.
That's like 6 years :o (Although I do have a Juice CS4 on the way).
-
aaaaand now I have a new latest Leatherman :)
(http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_0727_zpsgcdjawma.jpg) (http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_0727_zpsgcdjawma.jpg.html)
-
aaaaand now I have a new latest Leatherman :)
(http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_0727_zpsgcdjawma.jpg) (http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_0727_zpsgcdjawma.jpg.html)
Not too sure about the Juice but :tu: for the Captain :rofl:
-
Guess what got delivered today. Almost new pulse and sidekick. Still waiting for minitool
-
Nice :multi:
-
Nice :multi:
+1 :cheers:
I like your new Juice as well Dave :tu:
-
Cheers Poncho, I'm going to compare it to an original when I knock off work for the day.
I already noticed that they seem to have shortened the blade quite a bit for some reason (unless its just mine of course)!
-
Cheers Poncho, I'm going to compare it to an original when I knock off work for the day.
I already noticed that they seem to have shortened the blade quite a bit for some reason (unless its just mine of course)!
Originally they had planned on making the Juice series TSA compatible with the new facelift but that didn't work out for whatever reason and I guess LM had already began production so they just kept the shortened blade in ??? :D
-
Lol - fair enough then!
-
Squirt as keychain have served well. Now give it a go with larger scissors in form of micra
(http://uploads.tapatalk-cdn.com/20160803/d2efd812ae6129274575173a46d218ee.jpg)
-
Squirt as keychain have served well. Now give it a go with larger scissors in form of micra
(http://uploads.tapatalk-cdn.com/20160803/d2efd812ae6129274575173a46d218ee.jpg)
Nice close up of the Micra temo :cheers:
-
aaaaand now I have a new latest Leatherman :)
(http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_0727_zpsgcdjawma.jpg) (http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_0727_zpsgcdjawma.jpg.html)
Not too sure about the Juice but :tu: for the Captain :rofl:
Captain sensible indicate that he's got two Leatherman's? Or what??
Nice Juice
-
aaaaand now I have a new latest Leatherman :)
(http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_0727_zpsgcdjawma.jpg) (http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_0727_zpsgcdjawma.jpg.html)
Not too sure about the Juice but :tu: for the Captain :rofl:
Captain sensible indicate that he's got two Leatherman's? Or what??
Nice Juice
:D
-
Squirt as keychain have served well. Now give it a go with larger scissors in form of micra
(http://uploads.tapatalk-cdn.com/20160803/d2efd812ae6129274575173a46d218ee.jpg)
Nice close up of the Micra temo :cheers:
Tx, yes steel looks good :)
-
My latest arrived today. As an avid Pulse and ST200 fan, this fits the bill! I would love to have another one with the Pulse toolset to pair with a Farmer.
(https://c7.staticflickr.com/9/8889/28661454502_da34ffa443_k.jpg)
-
My latest arrived today. As an avid Pulse and ST200 fan, this fits the bill! I would love to have another one with the Pulse toolset to pair with a Farmer.
(https://c7.staticflickr.com/9/8889/28661454502_da34ffa443_k.jpg)
It is a great MT Terry :cheers:
-
(http://uploads.tapatalk-cdn.com/20160804/8ad7e63d51370460a42a175d1f9eaaa1.jpg)
Just got this dropped off today. Cabelas camo Leatherman Charge TTi. Lucked out and got it on sale for $124.99. It's got the older Charge TTi scales on it so it must be old stock. Nonetheless I'm very happy with this purchase. Couldn't go wrong for the price.
Sent from my iPhone using Tapatalk
-
(http://uploads.tapatalk-cdn.com/20160804/8ad7e63d51370460a42a175d1f9eaaa1.jpg)
Just got this dropped off today. Cabelas camo Leatherman Charge TTi. Lucked out and got it on sale for $124.99. It's got the older Charge TTi scales on it so it must be old stock. Nonetheless I'm very happy with this purchase. Couldn't go wrong for the price.
Sent from my iPhone using Tapatalk
That thing is awesome pit :cheers:
-
Thanks Poncho. It's like Christmas in August lol
Sent from my iPhone using Tapatalk
-
My latest arrived today. As an avid Pulse and ST200 fan, this fits the bill! I would love to have another one with the Pulse toolset to pair with a Farmer.
(https://c7.staticflickr.com/9/8889/28661454502_da34ffa443_k.jpg)
I pulled the trigger last night for the Rebar as well, along with a bit set and adapter that compatible with the ST300 as well.
After completing the July Challenge and testing my MT aptitude the Rebar should be better suited for EDC with box sheath.
May have by mid next week, unless wife hides it from me before I get back next Friday.
Sent from my iPhone using Tapatalk
-
Got this crater c33. :cheers:
Great condition, though the thumbstud seems rather tiny.
(http://imgur.com/ItvtLs0.jpg)
(http://imgur.com/znUKzBg.jpg)
(http://imgur.com/gEWcMYb.jpg)
(imgur changed, sigh)
-
I picked up 2 micras and a style today.
They were in a cabinet at the place I took my car to, to get a tow bar fitted.
-
I picked up 2 micras and a style today.
They were in a cabinet at the place I took my car to, to get a tow bar fitted.
I saw your post on the other thread Kev - what a result that was! :cheers:
-
I picked up 2 micras and a style today.
They were in a cabinet at the place I took my car to, to get a tow bar fitted.
Nice buddy :cheers:
-
Thanks guys.
Anyone know where the date stamp is on a style? I can't find one.
-
Thanks guys.
Anyone know where the date stamp is on a style? I can't find one.
I don't have one and don't know for sure but open it up and look in the inside where the liners are if not there may not be one :think:
-
I only have one Style and I can't see a date code on it either. Thought I'd found something, but on closer inspection it was just a scratch, lol.
-
I've gone over it with a magnifying glass and can't find one.
-
Delivered this morning, a knifeless rebar with my name on.
-
I picked up 2 micras and a style today.
They were in a cabinet at the place I took my car to, to get a tow bar fitted.
Your hoooooooked like me. Can't resist.
-
I've gone over it with a magnifying glass and can't find one.
Tried helping you. Can't find the style.
-
Delivered this morning, a knifeless rebar with my name on.
Sweet and the name is 8)
Congrats buddy :tu:
-
I've gone over it with a magnifying glass and can't find one.
Tried helping you. Can't find the style.
You look like you organize things like me :D
-
Found my FREE- Style. Should be at more or less the same Area. I think!!!!!
-
I've gone over it with a magnifying glass and can't find one.
Tried helping you. Can't find the style.
You look like you organize things like me :D
Mate. It's like a hookers handbag. Will sort it tomorrow.
Not
-
I've gone over it with a magnifying glass and can't find one.
Tried helping you. Can't find the style.
You look like you organize things like me :D
Mate. It's like a hookers handbag. Will sort it tomorrow.
Not
So you do organize like me :rofl:
-
By the sounds if it yes. Show me
Yours
-
I may try and get a pic later :D They are in a couple of boxes (sort of) on a desk in the room we use to call our den until we added a den on so now the room is a pile all ::) I have other things put in the closet of the same room :D
-
Only reason my bench looks like that is I asked my son to get me something. Kids!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
Another surge arrived today, it was going to be for in my car but it's like brand new, so it will be my new carry surge and my current carry one will live in my car along with a gerber MP400.
I also got an led lenser K3 as a freebie with my knifeless rebar. :D
-
Found this pulse, nib, in a local store which they were selling as a rev. It found its way home with me!
-
Found this pulse, nib, in a local store which they were selling as a rev. It found its way home with me!
Great find :cheers: It sure is better than getting a Rev :D
-
Found this pulse, nib, in a local store which they were selling as a rev. It found its way home with me!
Great find :cheers: It sure is better than getting a Rev :D
Thanks Poncho :cheers:
I got home to find a friend had gifted me a skeletool so it's Christmas in my home today!
-
Found this pulse, nib, in a local store which they were selling as a rev. It found its way home with me!
Great find :cheers: It sure is better than getting a Rev :D
Thanks Poncho :cheers:
I got home to find a friend had gifted me a skeletool so it's Christmas in my home today!
That is even better :cheers:
-
Found this pulse, nib, in a local store which they were selling as a rev. It found its way home with me!
Great find :cheers: It sure is better than getting a Rev :D
No kidding :cheers:
-
Found this pulse, nib, in a local store which they were selling as a rev. It found its way home with me!
Great find :cheers: It sure is better than getting a Rev :D
No kidding :cheers:
:D :cheers:
-
Found this pulse, nib, in a local store which they were selling as a rev. It found its way home with me!
Wow, nice score!
-
Just received the Minitool. Date is 0298
2 Tiny rust spots. Hard to see. But in like brand new condition. All tools never been used. I'm very happy with this purchase.
-
Nice one G :cheers:
-
Just received the Minitool. Date is 0298
2 Tiny rust spots. Hard to see. But in like brand new condition. All tools never been used. I'm very happy with this purchase.
Very nice GH :cheers: One of my favs :tu:
-
Thanks Poncho and steve
-
Something older, sleeker, sexier... :D
-
Nice.
And a Leatherman on top of it.
-
Found this pulse, nib, in a local store which they were selling as a rev. It found its way home with me!
Wow, nice score!
Thanks Monrogue :tu:
-
Just received the Minitool. Date is 0298
2 Tiny rust spots. Hard to see. But in like brand new condition. All tools never been used. I'm very happy with this purchase.
Very cool tool! I still need one for my drawer.
-
Something older, sleeker, sexier... :D
Sleek and sexy it is, nice tool :salute:
-
Black oxide Surge
(http://uploads.tapatalk-cdn.com/20160809/b542daefb9118bfdb967e50080c64754.jpg)
Sent from my iPhone using Tapatalk
-
Black oxide Surge
(http://uploads.tapatalk-cdn.com/20160809/b542daefb9118bfdb967e50080c64754.jpg)
Sent from my iPhone using Tapatalk
Very 8) Sir Smashie :cheers:
-
Black oxide Surge
(http://uploads.tapatalk-cdn.com/20160809/b542daefb9118bfdb967e50080c64754.jpg)
Sent from my iPhone using Tapatalk
:drool: :drool: :drool:
-
Black oxide Surge
(http://uploads.tapatalk-cdn.com/20160809/b542daefb9118bfdb967e50080c64754.jpg)
Sent from my iPhone using Tapatalk
:drool: :drool: :drool:
+1 on that. I definitely need to get me a BO one sometime
-
Black oxide Surge
(http://uploads.tapatalk-cdn.com/20160809/b542daefb9118bfdb967e50080c64754.jpg)
Sent from my iPhone using Tapatalk
:drool: :drool: :drool:
+1 on that. I definitely need to get me a BO one sometime
Just win one. Easy peasy.
-
Just win one. Easy peasy.
Wasn't that a PST? :whistle: :P
-
Yes. And its black
-
Arrived Monday, but unable to open until return home on Friday night.
(http://uploads.tapatalk-cdn.com/20160813/043976f6dc128d1d1594f54f7918b291.jpg)
Also, bit kit for both Rebar and ST300.
Sent from my iPhone using Tapatalk
-
Today I got a G1 BO Surge and a Sideclip. The Sideclip has a nice Ducks Unlimited etching, but is balisong loose. Also, the blade is about sharpened to a nub and the cap lifter is broken off. I bought it to be a parts donor to another Sideclip that had damaged pliers, but these pliers are discolored and so loose it's funny.
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160815_174100_zps6eohrzzj.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160815_174100_zps6eohrzzj.jpg.html)
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160815_174127_zpsp7trjkec.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160815_174127_zpsp7trjkec.jpg.html)
-
Just scored a like new Leatherman Flair on E-bay for $24. They had it titled as a vintage leatherman Supertool multi-tool.
(http://i.ebayimg.com/images/g/cPcAAOSwh
OdXpQdq/s-l1600.jpg)
-
Just scored a like new Leatherman Flair on E-bay for $24. They had it titled as a vintage leatherman Supertool multi-tool.
(http://i.ebayimg.com/images/g/cPcAAOSwhOdXpQdq/s-l1600.jpg)
I love mislabeled things on ebay :like: Great score :cheers:
-
Both great scores Aberdrew and LoopCutter :tu:
-
My Sideclip was listed as Sidekick. ::)
-
Both great scores Aberdrew and LoopCutter :tu:
Thanks. The Surge is my first BO MT.
-
My Sideclip was listed as Sidekick. ::)
Common mistake for me to type that here so I can imagine that could happen easy :D Great score :cheers:
-
Just scored a like new Leatherman Flair on E-bay for $24. They had it titled as a vintage leatherman Supertool multi-tool.
(http://i.ebayimg.com/images/g/cPcAAOSwhOdXpQdq/s-l1600.jpg)
Nice! :tu: :tu: I had one once... but then she saw it. An alox rambler had the same fate. :facepalm:
-
Old TTi, meet new TTi :)
(http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_0005_zps3j8acupd.jpg) (http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_0005_zps3j8acupd.jpg.html)
-
Old TTi, meet new TTi :)
I need to get myself a plain jane TTi. Is your new toy having coarse or fine serrations on the pliers?
-
Striations are coarse which I like, but I can tell you that the pliers are not finished well at all - they look like a Friday afternoon job! The pliers and internal tool opening feels "gritty" also but I can sort that with a bit of lube no doubt.
On the plier head the excess steel doesn't seem to have been ground away properly after casting - which is ugly:
(http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_0802_zpsytlyglao.jpg) (http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_0802_zpsytlyglao.jpg.html)
Of more concern is the gap between the two parts of the pliers - pic shows difference between old and new. Despite this however, the cutters do seem to align properly and they seem functional but I wonder how they'd fare if I was twisting something and torquing them a bit. They're very stiff too, but that could simply be that my old one has had almost 10 years of use, tweaking and "tuning" to my liking.
(http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_0804_zpsexwjmqa3.jpg) (http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_0804_zpsexwjmqa3.jpg.html)
I like the new scales - very slightly wider and at least as comfortable as the old ones. They travel and close narrower than the original too (a statistic more than a pro or con really). Next pic shows difference in the handles when pliers are closed:
(http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_0805_zpsf1nolcm6.jpg) (http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_0805_zpsf1nolcm6.jpg.html)
In summary, I like the new version because of the new scales but the QC isn't what I expected based on the Leatherman of old so I'm a bit disappointed. Not sure if I'll exchange it as I've bought it as a backup for the existing one - its a user not a drawer queen so will think about it I guess.
Handle dates are 01 16 and 04 16, so its pretty recent.
-
Just got an used Wave. Again, being a Leatherman, with the scissors handle broken (like in my new Style PS).
The blades are as dull as my posts and it seems to have been used a lot, all tools.
I'll probably be sending it for repair, hope they take care of these issues, too...
-
I don't care for the charge TTi anymore because I don't want the s30v blade. I much prefer the standard 420hc as found on their other tools. It's easier for me to maintain.
I've had a lot of waves over the years but most recently purchased a 2013 dated one from Lowes. To my amazement, this one doesn't have some of the issues that past ones had. I'm still keeping a special eye on it because it could break but I do like their warranty program.
So I carry the 2 bit sleeves in a leather Rebar sheath, and the Wave in a nylon sheath. Oh, and I received my $5 accessory clip today from Amazon. I may consider carrying it in my cargo pocket sometimes.
So far, the most used tools on this have been the pliers and the scissors. I just hope my scissor handle doesnt break like so any others. :-\
Time will tell how long I carry this one over my beloved MP600 but so far I'm kinda stoked... :tu:
-
On the plier head the excess steel doesn't seem to have been ground away properly after casting - which is ugly:
It must be the pattern change from fine to coarse serration designs. I have a few Charges and Waves with coarse serration and cap crimpers, they all look like that. Not sure about coarse serration, non-CC plier heads though.
-
I have a few Charges and Waves with coarse serration and cap crimpers, they all look like that.
Its a bit disappointing - I have had dozens of Charges (still have quite a few) and this is the only one I've seen with this poor finishing.
I decided to keep it though as it is only for backup / use. It doesn't actually need to be pretty.
-
In 2000 the Wave with tooladpter was my entry into Multitools. For the long time of 15 years it also was my one and only. But this year I joined several EDC-Boards...so ::)
(http://up.picr.de/24455400di.jpg)
-
Nice pic ! Good to have another fellow guitar player on the forum :cheers:
-
Nice pic ! Good to have another fellow guitar player on the forum :cheers:
I agree that is a great pic :like:
You will find that this is the best forum of all the ones you have joined :whistle: :D :D :D
-
8) Skeletool RX. Terrific color and love the serrated blade. Over all nice but a quite spendy IMO.
-
Just received a (new!) Knifeless Fuse:
(http://i894.photobucket.com/albums/ac148/oxford_guy/EDC/IMG_1641_zpshbe4pz7n.jpg)
Great for UK-legal carry
-
8) Skeletool RX. Terrific color and love the serrated blade. Over all nice but a quite spendy IMO.
Nice Aloha 8)
-
Just received a (new!) Knifeless Fuse:
(http://i894.photobucket.com/albums/ac148/oxford_guy/EDC/IMG_1641_zpshbe4pz7n.jpg)
Great for UK-legal carry
Congrats :cheers: and carry in good health :tu:
-
Added these three to my collection, today. All thanks to BADSAK. :tu:
(http://uploads.tapatalk-cdn.com/20160829/aa0d9c54af3bd1eb86b48f815593ca0e.jpg)(http://uploads.tapatalk-cdn.com/20160829/f4db4b13f8a2c0d2355a7cf4d8cbc839.jpg)(http://uploads.tapatalk-cdn.com/20160829/910df1f00424de42bed568e0a3f77aa6.jpg)
Sent from my Nexus 6 using Tapatalk
-
:like:
-
Added these three to my collection, today. All thanks to BADSAK. :tu:
(http://uploads.tapatalk-cdn.com/20160829/aa0d9c54af3bd1eb86b48f815593ca0e.jpg)(http://uploads.tapatalk-cdn.com/20160829/f4db4b13f8a2c0d2355a7cf4d8cbc839.jpg)(http://uploads.tapatalk-cdn.com/20160829/910df1f00424de42bed568e0a3f77aa6.jpg)
Sent from my Nexus 6 using Tapatalk
Excellent 8) you can take the pivot pin and clip from the Kick and it works with the Rebar very well :whistle: All you have to do is flatten the little tab on the clip or cut a notch and it works great :cheers:
-
Excellent 8) you can take the pivot pin and clip from the Kick and it works with the Rebar very well :whistle: All you have to do is flatten the little tab on the clip or cut a notch and it works great :cheers:
You people keep "suggesting" a Rebar!!! LOL
Sent from my Nexus 6 using Tapatalk
-
I just got a semi early-PST. No date codes :o I had only bought it for parts!
-
I just got a semi early-PST. No date codes :o I had only bought it for parts!
Nice find Aberdrew :cheers: :cheers: :cheers:
-
Excellent 8) you can take the pivot pin and clip from the Kick and it works with the Rebar very well :whistle: All you have to do is flatten the little tab on the clip or cut a notch and it works great :cheers:
You people keep "suggesting" a Rebar!!! LOL
Sent from my Nexus 6 using Tapatalk
Only just doing my job :whistle:
You really need one though :pok: :D
-
(http://i.imgur.com/sZWc9n5.jpg)
Wave Original 20 Years >:D
-
Nice one :tu:
-
Nice score!
-
I am on vacation on the way to Washington we stopped at the Leatherman store in Porland and bought a Siginal, hat and two t-shirts. Today I was at thrift store in Nampa Idaho and found a new BO Wave for 50.00. I think I need to take vacations more often. :D
-
An Original Super Tool arrived today. It still has the sticker on the handle, and the original sheath is in excellent condition. All functions look unused. I am glad I only paid $32 for it, as the thing is rusted in multiple spots. I may have a date with it this weekend!
-
(http://i.imgur.com/sZWc9n5.jpg)
Wave Original 20 Years >:D
Very nice :cheers: :cheers: :cheers:
:like:
-
An Original Super Tool arrived today. It still has the sticker on the handle, and the original sheath is in excellent condition. All functions look unused. I am glad I only paid $32 for it, as the thing is rusted in multiple spots. I may have a date with it this weekend!
Good one chrono :like:
Put it through the paces and I am sure you won't be disappointed :tu:
-
I am on vacation on the way to Washington we stopped at the Leatherman store in Porland and bought a Siginal, hat and two t-shirts. Today I was at thrift store in Nampa Idaho and found a new BO Wave for 50.00. I think I need to take vacations more often. :D
Nice score on the BO Wave :o :like:
-
IIRC...
(http://i1314.photobucket.com/albums/t562/ThePeacent/13061998_1067399583321887_7958413318532597600_n_zpsuvk6ady5.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/13118907_1067400153321830_6578310688010586694_n_zpshessyxif.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/13119126_1067400759988436_1319270614926463981_n_zpsmok2ljzg.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/13087329_1067399619988550_9215535799895115070_n_zpskpnygsrm.jpg)
-
I got a surprise today. Last week, I bought a NIB Mini Tool for cheap. I only have one Mini copy, so I was excited to add another one to the arsenal. Seller probably did not know what he had at hand, and did not bother to show the tool, just the box.
Well, it came in today. I was pleasantly surprised it was a BO one, with a sheath to boost. The only negative thing is a giant sticker on the box. It took me more than an hour to get rid of it.
My bounty for the week!
(http://i1036.photobucket.com/albums/a441/chronoxxx/20160901_225323_resized_zpsmzsjclks.jpg)
The box from the listing
(http://i.ebayimg.com/images/g/-E8AAOSwMtxXvs~5/s-l1600.jpg)
After an hour of slow peeling and picking up residues, the graphics shone through
(http://i1036.photobucket.com/albums/a441/chronoxxx/20160901_225236_resized_zpslelklksp.jpg)
-
^^^ 8) I proably would have left the big sticker on it since it had NSN and CAGE on it.
Got a early Crunch the other day 0799 date codes both places.
-
I got a surprise today. Last week, I bought a NIB Mini Tool for cheap. I only have one Mini copy, so I was excited to add another one to the arsenal. Seller probably did not know what he had at hand, and did not bother to show the tool, just the box.
Well, it came in today. I was pleasantly surprised it was a BO one, with a sheath to boost. The only negative thing is a giant sticker on the box. It took me more than an hour to get rid of it.
My bounty for the week!
(http://i1036.photobucket.com/albums/a441/chronoxxx/20160901_225323_resized_zpsmzsjclks.jpg)
The box from the listing
(http://i.ebayimg.com/images/g/-E8AAOSwMtxXvs~5/s-l1600.jpg)
After an hour of slow peeling and picking up residues, the graphics shone through
(http://i1036.photobucket.com/albums/a441/chronoxxx/20160901_225236_resized_zpslelklksp.jpg)
Result! :multi:
-
^^^ 8) I proably would have left the big sticker on it since it had NSN and CAGE on it.
Got a early Crunch the other day 0799 date codes both places.
Wow, I did not know about the NSN thing. Very interesting. The sticker was quite old, as the paper became brittle. The ink was actually flaking off as I tried to peel it.
-
Sent my charge in to get warranty repairs done. They sent me a new one.
-
I got a surprise today. Last week, I bought a NIB Mini Tool for cheap. I only have one Mini copy, so I was excited to add another one to the arsenal. Seller probably did not know what he had at hand, and did not bother to show the tool, just the box.
Well, it came in today. I was pleasantly surprised it was a BO one, with a sheath to boost. The only negative thing is a giant sticker on the box. It took me more than an hour to get rid of it.
My bounty for the week!
(http://i1036.photobucket.com/albums/a441/chronoxxx/20160901_225323_resized_zpsmzsjclks.jpg)
The box from the listing
(http://i.ebayimg.com/images/g/-E8AAOSwMtxXvs~5/s-l1600.jpg)
After an hour of slow peeling and picking up residues, the graphics shone through
(http://i1036.photobucket.com/albums/a441/chronoxxx/20160901_225236_resized_zpslelklksp.jpg)
Result! :multi:
Nice findI wish I had the original box. Thats all I short.
-
.
-
I just picked up another Mini-tool. Per the auction photos, it looks to be in really nice shape, and I didn't see any date codes either!
I'll post some pics when it is delivered.
-
My latest Leatherman :)
(https://content-9.foto.my.mail.ru/mail/wowaboro/_myphoto/b-90.JPG) (https://content-9.foto.my.mail.ru/mail/wowaboro/_myphoto/b-90.JPG.html)
Old Table top/Wall mount display fits 3 Multitools and Adapter
-
Very cool W :cheers:
-
Very cool W :cheers:
Ditto :tu:
Sent from my SM-G920R4 using Tapatalk
-
Very cool W :cheers:
Ditto :tu:
Sent from my SM-G920R4 using Tapatalk
That is very neat wowaboro :dd: :like:
-
Very cool W :cheers:
Ditto :tu:
Sent from my SM-G920R4 using Tapatalk
That is very neat wowaboro :dd: :like:
:cheers: :salute:
-
My latest Leatherman :)
(https://content-9.foto.my.mail.ru/mail/wowaboro/_myphoto/b-90.JPG) (https://content-9.foto.my.mail.ru/mail/wowaboro/_myphoto/b-90.JPG.html)
Old Table top/Wall mount display fits 3 Multitools and Adapter
-
Last night I made an offer on what looks like a pretty unused BO PST.....
....and it was accepted :nanadance:
-
^ :like:
-
Last night I made an offer on what looks like a pretty unused BO PST.....
....and it was accepted :nanadance:
Awesome can't wait to see it :dd: :cheers: :cheers: :cheers:
-
Last night I made an offer on what looks like a pretty unused BO PST.....
....and it was accepted :nanadance:
Awesome can't wait to see it :dd: :cheers: :cheers: :cheers:
http://www.ebay.com/itm/302066523947?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
-
New page banana man dance
:nanadance: :nanadance:
-
Last night I made an offer on what looks like a pretty unused BO PST.....
....and it was accepted :nanadance:
Awesome can't wait to see it :dd: :cheers: :cheers: :cheers:
http://www.ebay.com/itm/302066523947?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Thanks for the link :salute: Your right it is very nice :drool: :cheers: :cheers: :cheers:
:like:
-
Last night I made an offer on what looks like a pretty unused BO PST.....
....and it was accepted :nanadance:
Cool! :cheers:
-
0693/1093
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160913_111851_zpsdifwhnx8.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160913_111851_zpsdifwhnx8.jpg.html)
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160913_111829_zpsuy4srmzd.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160913_111829_zpsuy4srmzd.jpg.html)
-
:tu: :like: :cheers: :like: :tu:
-
0693/1093
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160913_111851_zpsdifwhnx8.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160913_111851_zpsdifwhnx8.jpg.html)
(http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160913_111829_zpsuy4srmzd.jpg) (http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160913_111829_zpsuy4srmzd.jpg.html)
Very nice. No crimper too :tu:
-
Good one Aberdrew :cheers: :cheers: :cheers:
:like:
-
Just in today.
(http://i86.photobucket.com/albums/k115/asc67/DSC00981_zpsuo6ohwuy.jpg) (http://s86.photobucket.com/user/asc67/media/DSC00981_zpsuo6ohwuy.jpg.html)
-
Delivered today.
-
I think I just bought a brand new, black Wave with CC for $20 shipped :ahhh (http://www.ebay.com/itm/252570440830)
New seller with zero feedback. Item is supposed to be in New York, but the eBay's est. delivery and the seller ID in paypal suggest the seller is registered in China ???
I shall see if I get one hell of a deal or some funny business. :cheers:
-
I think I just bought a brand new, black Wave with CC for $20 shipped :ahhh (http://www.ebay.com/itm/252570440830)
New seller with zero feedback. Item is supposed to be in New York, but the eBay's est. delivery and the seller ID in paypal suggest the seller is registered in China ???
I shall see if I get one hell of a deal or some funny business. :cheers:
Good Luck ! ( I think you may need it) If the deal does go sour hopefully you will be able to get your money back from ebay or paypal.
-
Good Luck ! ( I think you may need it) If the deal does go sour hopefully you will be able to get your money back from ebay or paypal.
Yep
- - The photo and description is copied from a bona fide Aussie LM dealer - So this seller does not have his own photos!!
I shall see if I get one hell of a deal or some funny business. :cheers:
Funny business I'd say
-
@Huntsman: Well, funny that you mentioned it. If you look at each item that seller sold, you will find each had layout of a different website, eBay seller... embedded in it. The interesting part is, I received email from eBay saying my item was shipped. I dealt with a few disputes on eBay within the last few months. eBay likely sides with the buyer. As long as I get a new black Wave, everything is good. If not, I likely get my money back.
-
I know it doesn't compare to the jewels you guys pull out, but I have an old style juice S2 on the way. The one with the aluminum scales on both handles. I am a little nervous, I bought it off of Ebay still in package. Hoping it is not a counterfeit.
-
MAIL call today:
Charge Ti and a wingman... and a bonus of an avid shooters multitool!
The wingman was a second offering in a trade and I had one but now I have two of those and that ain't bad! :-)
Thanks NKlamerus!!!
(http://uploads.tapatalk-cdn.com/20161008/23a9dfc6e54685f714bb94a957e7c739.jpg)
Sent from my iPhone using Tapatalk
-
The mail lady brought me today an interesting Camo Charge. First of, I won this Charge in a lot auction. I only saw the camo scale and no implement, so I took the seller's good condition assessment.
I had high hope when seeing minimal paint loss at first
(http://i1036.photobucket.com/albums/a441/chronoxxx/20161008_172514_zpswlgndopl.jpg)
Flick out the blades, I thought I scored a Bass Pro Shop Ti, but I quickly noticed that the main PE blade had no 154CM marking. I remembered reading somewhere about the thumb hole difference between the Wave and Charges. Comparing to Wave and another Charge TTi, it became clear the blade of my new toy was a Wave blade. The surface finish on both blades suggests they are more recent production than the date codes show.
(http://i1036.photobucket.com/albums/a441/chronoxxx/20161008_172743_zpsdcgqj7zi.jpg)
Deploying the pliers was easy. The seller probably oiled all the joints prior shipping. The pliers though, had two strange things going on. First of, it is a new-style Wave head with coarse serration. The serration and wire cutter seem unused. Second, the pivot is pretty stiff to the open. There are visible dents on the pin. Maybe someone hit the pin to make it tighter?
(http://i1036.photobucket.com/albums/a441/chronoxxx/20161008_172559_zpsmybw4laq.jpg)
Of course, I would check the date codes for anymore surprise 1008 / 0209
(http://i1036.photobucket.com/albums/a441/chronoxxx/20161008_172644_zpszro1bffx.jpg)
It is an amusing thing to look at and play with, but I think I got it in a good deal. :tu:
-
I remembered reading somewhere about the thumb hole difference between the Wave and Charges. Comparing to Wave and another Charge TTi, it became clear the blade of my new toy was a Wave blade. The surface finish on both blades suggests they are more recent production than the date codes show.
(http://i1036.photobucket.com/albums/a441/chronoxxx/20161008_172743_zpsdcgqj7zi.jpg)
Any chance you could post a pic showing the differences please.
-
Any chance you could post a pic showing the differences please.
Here you go, Z!
From top to bottom:
BO Wave
My Camo Charge that arrived today
Camo Zonz Woodlands Charge TTi (yah, I got this puppy. Probably the very first one on eBay >:D)
You can see the metal bar, on which you flick the blade out, is thinner on the Woodlands, while the other two are thicker and about the same shape and size.
(http://i1036.photobucket.com/albums/a441/chronoxxx/20161008_212025_zpslaoikjrr.jpg~original)
(http://i1036.photobucket.com/albums/a441/chronoxxx/d005bc35-cdd0-4004-ab63-6464d2a2cfc2_zpshxogqm0d.jpg~original)
-
Any chance you could post a pic showing the differences please.
Here you go, Z!
From top to bottom:
BO Wave
My Camo Charge that arrived today
Camo Zonz Woodlands Charge TTi (yah, I got this puppy. Probably the very first one on eBay >:D)
You can see the metal bar, on which you flick the blade out, is thinner on the Woodlands, while the other two are thicker and about the same shape and size.
(http://i1036.photobucket.com/albums/a441/chronoxxx/20161008_212025_zpslaoikjrr.jpg~original)
(http://i1036.photobucket.com/albums/a441/chronoxxx/d005bc35-cdd0-4004-ab63-6464d2a2cfc2_zpshxogqm0d.jpg~original)
Interesting. While I don't currently have any here I have seen S30V and 154CM blades with the thicker bar. Thanks for the pics mate. :cheers:
-
Interesting. While I don't currently have any here I have seen S30V and 154CM blades with the thicker bar. Thanks for the pics mate. :cheers:
I vaguely remember it is something like the 420HC blade is punched, while the 154CM and S30V blades are laser cut. This allows the hole to be bigger for comfort.
-
Interesting. While I don't currently have any here I have seen S30V and 154CM blades with the thicker bar. Thanks for the pics mate. :cheers:
I vaguely remember it is something like the 420HC blade is punched, while the 154CM and S30V blades are laser cut. This allows the hole to be bigger for comfort.
A neat difference for sure :tu:
-
Interesting. While I don't currently have any here I have seen S30V and 154CM blades with the thicker bar. Thanks for the pics mate. :cheers:
I vaguely remember it is something like the 420HC blade is punched, while the 154CM and S30V blades are laser cut. This allows the hole to be bigger for comfort.
A neat difference for sure :tu:
Nice, thanks for the info. :salute:
-
Re-wave from Demel! :D
(http://uploads.tapatalk-cdn.com/20161012/12a4bb784fb64bf11c360867c4cff705.jpg)
-
Score!!!!
Traded one of those $10 Outa tools from eBay...
(http://uploads.tapatalk-cdn.com/20161012/eef2ff9c9c700e2401d1ce7a0ddc4a6c.jpg)
For this!!
(http://uploads.tapatalk-cdn.com/20161012/a9b3109319ea0dd84153eba17a0a3076.jpg)(http://uploads.tapatalk-cdn.com/20161012/f36ae4425b79b4535dc5cef30c756297.jpg)(http://uploads.tapatalk-cdn.com/20161012/e3e6a4266e572c73a9bff715de53d47c.jpg)(http://uploads.tapatalk-cdn.com/20161012/f0ff969fa61c9f5066fbaee5d33b9b36.jpg)(http://uploads.tapatalk-cdn.com/20161012/608cafa3238236173902337b778b8722.jpg)
Now I have TWO of the Marlboro PSTs...the second is not in as nice of condition.
(http://uploads.tapatalk-cdn.com/20161012/eb4d40a86759111e437eed036ad4745a.jpg)(http://uploads.tapatalk-cdn.com/20161012/eeea7c05b4f0bcac4769d7a927843dda.jpg)(http://uploads.tapatalk-cdn.com/20161012/84d1bb5b29943cc7ded2c34ae3d3860a.jpg)
Sent from my Nexus 6 using Tapatalk
-
Good trade! :like:
-
Good trade! :like:
+1 :tu:
-
Close
-
enough
-
right.
-
New page banana man dance. :nanadance: :nanadance:
-
New page banana man dance. :nanadance: :nanadance:
:spam: :rofl:
I wish there was a happy spam option....
-
I thought I added a K503X to my collection for $19.99 http://www.ebay.com/itm/112167682803 :drool:
But then the guy had a seller's remorse, canceled my order, and relisted the item for $79.99 http://www.ebay.com/itm/122183547991 :rant: His message, "I am sorry but there was a malfunction in the price of this listing". From order to cancel in 15 minutes!
Probably the boss man wrote 79.99, and the klutzy employee read 19.99.
(http://i.ebayimg.com/images/g/gkQAAOSwzaJYAkc4/s-l1600.jpg)
-
I thought I added a K503X to my collection for $19.99 http://www.ebay.com/itm/112167682803 :drool:
But then the guy had a seller's remorse, canceled my order, and relisted the item for $79.99 http://www.ebay.com/itm/122183547991 :rant: His message, "I am sorry but there was a malfunction in the price of this listing". From order to cancel in 15 minutes!
Probably the boss man wrote 79.99, and the klutzy employee read 19.99.
(http://i.ebayimg.com/images/g/gkQAAOSwzaJYAkc4/s-l1600.jpg)
I saw that! Way too much now!
On the other hand, this came in the mail today!!!
Thank you, sLaughterMed!!!
(http://uploads.tapatalk-cdn.com/20161015/d14bcc5d2638bea379dedbad25585e47.jpg)
Sent from my Nexus 6 using Tapatalk
-
Well, even though I'm doing the SAK Minimalist Challenge this month, I needed the help of my newest LM, the OHT...
Wife picked up an office chair from a yard sale. I found one of the bolts holding the right side arm was broken off.
There was a little piece of metal sticking up...only thing I had near me was the OHT. The way the tips of the pliers are made it perfect for removing that broken bolt....none of my SAKs could have done that!
(http://uploads.tapatalk-cdn.com/20161015/fe99de7292596da2f154e7cbfeb15e27.jpg)
Once removed, my Centurian easily handled putting the new screw in and tightening all the rest of the screws...
(http://uploads.tapatalk-cdn.com/20161015/b18aca0d191925eb3cde7718d9f55936.jpg)
Yep, back to the Centurian for the rest of the month!
(http://uploads.tapatalk-cdn.com/20161015/c3e414099ceb99966c9a8c251383e3d9.jpg)
Sent from my Nexus 6 using Tapatalk
-
The mail lady brought me my $15 Mini Tool today :mail: It is in mint condition, except a few rust spot. Probably score of the (last) week for me :cheers:
-
Signal for me.
Like it so far, in spite of the polar views here on the forum. I have a couple of mods I am planning to do / test. So far I replaced the saw with a Wave file (just dropped it in) and dyed the yellow bits black. The ferro rod did not like the dye or the heat or the added salt to the mixture, it came out a little grainy. It still works though.
Mods that I have planned:
Fit a Wave scissors - it fits, but there needs some work done to close the tool completely.
Test if a Surge Blade exchanger will fit where the saw goes, pivot size is OK, but it might be a tad to thick. The bits will not fit with the tool closed, they are to long.
That is all for now.
Pete
-
:like:
-
:like:
-
Signal for me.
Like it so far, in spite of the polar views here on the forum. I have a couple of mods I am planning to do / test. So far I replaced the saw with a Wave file (just dropped it in) and dyed the yellow bits black. The ferro rod did not like the dye or the heat or the added salt to the mixture, it came out a little grainy. It still works though.
Mods that I have planned:
Fit a Wave scissors - it fits, but there needs some work done to close the tool completely.
Test if a Surge Blade exchanger will fit where the saw goes, pivot size is OK, but it might be a tad to thick. The bits will not fit with the tool closed, they are to long.
That is all for now.
Pete
Nice :tu: I had the same result with the ferro rod on mine. Only after did I discover it can be popped out. So I got a new set and dyed them to the proper red I wanted.
Sent from my SM-G920R4 using Tapatalk
-
I thought I added a K503X to my collection for $19.99 http://www.ebay.com/itm/112167682803 :drool:
But then the guy had a seller's remorse, canceled my order, and relisted the item for $79.99 http://www.ebay.com/itm/122183547991 :rant: His message, "I am sorry but there was a malfunction in the price of this listing". From order to cancel in 15 minutes!
Probably the boss man wrote 79.99, and the klutzy employee read 19.99.
(http://i.ebayimg.com/images/g/gkQAAOSwzaJYAkc4/s-l1600.jpg)
I saw that! Way too much now!
On the other hand, this came in the mail today!!!
Thank you, sLaughterMed!!!
(http://uploads.tapatalk-cdn.com/20161015/d14bcc5d2638bea379dedbad25585e47.jpg)
Sent from my Nexus 6 using Tapatalk
I'd be scared to carry it in my pocket...
:ahhh :ahhh :ahhh :ahhh
-
I thought I added a K503X to my collection for $19.99 http://www.ebay.com/itm/112167682803 :drool:
But then the guy had a seller's remorse, canceled my order, and relisted the item for $79.99 http://www.ebay.com/itm/122183547991 :rant: His message, "I am sorry but there was a malfunction in the price of this listing". From order to cancel in 15 minutes!
Probably the boss man wrote 79.99, and the klutzy employee read 19.99.
(http://i.ebayimg.com/images/g/gkQAAOSwzaJYAkc4/s-l1600.jpg)
I saw that! Way too much now!
On the other hand, this came in the mail today!!!
Thank you, sLaughterMed!!!
(http://uploads.tapatalk-cdn.com/20161015/d14bcc5d2638bea379dedbad25585e47.jpg)
Sent from my Nexus 6 using Tapatalk
I'd be scared to carry it in my pocket...
:ahhh :ahhh :ahhh :ahhh
LOL!!!!
Huh, the picture with the drawing didn't make it thru the reply...that's what the "LOL" was for...
Sent from my Nexus 6 using Tapatalk
-
Received three today :D :
- Old-style Surge 0213 date code on both handles. Grimes and some rust, but most tools have little to no sign of use. Unfortunately no saw blade or sheath, but I can't really complain for $35
- New-style Wave 1004/1104 date codes. Is this one first production run? It has PAT PEND stamped on handles, and pentalobe security screws. Basically a new piece, with original sheath.
- Orange Fuse: this is a pleasant surprise, as it has almost no pain loss on the handles. Besides the pliers, all other tools are unused. It was said that the owner was a lady, who used it only a few times. Lucky me :D
(http://i1036.photobucket.com/albums/a441/chronoxxx/20161019_182658_zpslbautpz6.jpg)
-
:like:
-
A Sidekick was delivered on Saturday as part of a package deal. I always dismissed the Sidekick and the Wingman as entry level tools and figured I was already beyond that level. It is very comfortable in the hand, however, and I'm kind of digging it. I'm looking forward to putting it through its paces when the challenges are over.
-
Nice :tu: I had the same result with the ferro rod on mine. Only after did I discover it can be popped out. So I got a new set and dyed them to the proper red I wanted.
That is good to know, I just had a look on Oz LM site, they want $28 for it - Out of Stock, where as on the US site it is $8. That is a bit steep I'd say. Pity the US one does not ship to Oz. At today's rate it is not even $11 Oz.
A mate took it on a two day hike, and I am keen to hear his thoughts.
Pete
-
Nice :tu: I had the same result with the ferro rod on mine. Only after did I discover it can be popped out. So I got a new set and dyed them to the proper red I wanted.
That is good to know, I just had a look on Oz LM site, they want $28 for it - Out of Stock, where as on the US site it is $8. That is a bit steep I'd say. Pity the US one does not ship to Oz. At today's rate it is not even $11 Oz.
A mate took it on a two day hike, and I am keen to hear his thoughts.
Pete
Yeah both items together was a little more than I wanted to pay, but it was the only way to start fresh and get the color I wanted without that pitting effect on the rod.
Sent from my SM-G920R4 using Tapatalk
-
Looks like my "latest Leatherman" is going for a visit to the Leatherman repair shop.
My newly acquired black OHT, that I got from sLaughterMed (for a DEAL!!!) is in need of repair. I was tightening a Phillips head screw on the lid to a big pot, and part of the tip of the screwdriver broke off!
I'll try to get a picture when I get home, but it's tough to do.
Sent from my Nexus 6 using Tapatalk
-
Was a crunch but just could not get on with it at all, didn't like the blade and I thought I would have more use for the locking pliers. Think I'm going to order a small set of vise grips for my edc toolkit instead. The fact you can use a bit holder with it though which I like.
Gifted it off to my father-in-law who has put it in his motorcycle kit
-
Looks like my "latest Leatherman" is going for a visit to the Leatherman repair shop.
My newly acquired black OHT, that I got from sLaughterMed (for a DEAL!!!) is in need of repair. I was tightening a Phillips head screw on the lid to a big pot, and part of the tip of the screwdriver broke off!
I'll try to get a picture when I get home, but it's tough to do.
Sent from my Nexus 6 using Tapatalk
(http://uploads.tapatalk-cdn.com/20161021/e1d8d897a6afc652559e5bd6615e945f.jpg)(http://uploads.tapatalk-cdn.com/20161021/9d90791d399afccad391d25890160838.jpg)
Sent from my Nexus 6 using Tapatalk
-
(http://uploads.tapatalk-cdn.com/20161022/e5807248b17ffe2b71f3dd7a62c8556f.jpg)
-
I stumbled upon a nice TSA confiscated PST today at the gunshow. It is an 1089 with minor scuffs and a nylon Leatherman sheath. I removed the glue/ tar/ plaster from all of the implements and scrubbed it down with a strong detergent. Blew it out and hosed it down with WD40. Wrapped the tool in saran wrap and scrubbed the sheath with laundry detergent. I slipped the tool into the sheath and it is currently drying on my work bench. I'm very happy to say the least. tom. :multi: :cheers:
-
I stumbled upon a nice TSA confiscated PST today at the gunshow. It is an 1089 with minor scuffs and a nylon Leatherman sheath. I removed the glue/ tar/ plaster from all of the implements and scrubbed it down with a strong detergent. Blew it out and hosed it down with WD40. Wrapped the tool in saran wrap and scrubbed the sheath with laundry detergent. I slipped the tool into the sheath and it is currently drying on my work bench. I'm very happy to say the least. tom. :multi: :cheers:
pics or it didn't happen :pok:
-
I stumbled upon a nice TSA confiscated PST today at the gunshow. It is an 1089 with minor scuffs and a nylon Leatherman sheath. I removed the glue/ tar/ plaster from all of the implements and scrubbed it down with a strong detergent. Blew it out and hosed it down with WD40. Wrapped the tool in saran wrap and scrubbed the sheath with laundry detergent. I slipped the tool into the sheath and it is currently drying on my work bench. I'm very happy to say the least. tom. :multi: :cheers:
pics or it didn't happen :pok:
Pics when I can get my hands on Wife's phone/cam. tom. 8)
ETA the sheath still smells a little musty.
-
:cheers:
-
I have yet to take pics bit I did end up buying a raptor yesterday :dd: I hadn't even planned on buying one of those but in hand it was so nice and I did have some early birthday money :whistle:
-
:cheers:
-
OOPSIE, that date is 1198. tom. :oops:
Close to an hour of trying to post a picture we are done. Something is wrong with her phone/camera. I give up. Trust me when I say I got the PST. tom. :facepalm:
-
Here we go. tom.
-
:like:
-
I got my first leatherman last week, a style CS
Now I want a Style PS and a Style ES and a non-redundant toolset between them :ahhh
OCD on top of a hoarder mindset is a terrible malady :whistle:
-Tom
-
My latest and it is, after all, from Leatherman...
Just came today! Will go with my ST300 or my OHT.
(http://uploads.tapatalk-cdn.com/20161026/f1bdf9383769fb5402a41b49b60d1fe0.jpg)(http://uploads.tapatalk-cdn.com/20161026/b4ce338af97beaedad781a5908db589d.jpg)
Sent from my Nexus 6 using Tapatalk
-
My latest and it is, after all, from Leatherman...
Just came today! Will go with my ST300 or my OHT.
(http://uploads.tapatalk-cdn.com/20161026/f1bdf9383769fb5402a41b49b60d1fe0.jpg)(http://uploads.tapatalk-cdn.com/20161026/b4ce338af97beaedad781a5908db589d.jpg)
Sent from my Nexus 6 using Tapatalk
I think I will toss together a small kit with the ST300, the removable bit driver and a nice ¼" bit kit. Put in some sort of nice box.
When we move to the new house, all my tools will be down in the basement garage, in my workshop. This kit I make up will be on main floor for all petty work needing done around the house.
That way I don't need to clutter up my garage with tool boxes. Just 2 vehicles and a motorcycle...and maybe an air compressor. Basically, my dream of "3 white walls" garage!!
All my other garages have always been packed with crap!
Sent from my Nexus 7 using Tapatalk
-
Got my black/ orange Raptor today. The Skeletool RX came in last week. Suddenly, I have 4 Orange LM tools :think:
-
Got my black/ orange Raptor today. The Skeletool RX came in last week. Suddenly, I have 4 Orange LM tools :think:
How do you like the RX? Does the blade have any edc utility?
Sent from my Z988 using Tapatalk
-
Got my black/ orange Raptor today. The Skeletool RX came in last week. Suddenly, I have 4 Orange LM tools :think:
How do you like the RX? Does the blade have any edc utility?
Sent from my Z988 using Tapatalk
I paid like $35 for it used with some minor paint loss and all tools in new condition, for collecting purpose. I would say a standard Skele or CX would be better utility, as the serration length on the RX is a bit too long. The modified sheepfoot blade is probably only good for cutting packaging tape in everyday setting. Also, I wish the paint was matte instead of glossy, and maybe in black/ orange tones. The Leupold is a fine example of a paint job done right :tu:
-
Here is my Charge TTi signed by Tim.
(http://images76.fotosik.pl/11/da53cdee4daa7ac2gen.jpg)
-
:cheers: :like: :cheers:
-
Here is my Charge TTi signed by Tim.
(http://images76.fotosik.pl/11/da53cdee4daa7ac2gen.jpg)
Cool :tu:
Sent from my SM-G920R4 using Tapatalk
-
I purchased two Leatherman tools today from my local Leatherman dealer. A Charge which will go in my shoulder bag and a Surge which will be my edc.
I've tried to post a picture without success.
-
(http://i1314.photobucket.com/albums/t562/ThePeacent/CAM05879_zps8um0xfuv.jpg)
-
I've purchased another pair of Leatherman multi tools today. A Skeletool and a Rebar. My Leatherman collection now stands at four multitools. My aim is to collect at least one example of each Leatherman Model. :multi:
-
My aim is to collect at least one example of each Leatherman Model. :multi:
Be careful you don't start looking for all the different variants - that can be a deep, long, frustrating (and very expensive) rabbit hole :pok:
-
I've purchased another pair of Leatherman multi tools today. A Skeletool and a Rebar. My Leatherman collection now stands at four multitools. My aim is to collect at least one example of each Leatherman Model. :multi:
One in Stainless One in Black oxide :)
-
My aim is to collect at least one example of each Leatherman Model. :multi:
Be careful you don't start looking for all the different variants - that can be a deep, long, frustrating (and very expensive) rabbit hole :pok:
I've had that experience collecting Victorinox Solidier knives.
-
I've purchased another pair of Leatherman multi tools today. A Skeletool and a Rebar. My Leatherman collection now stands at four multitools. My aim is to collect at least one example of each Leatherman Model. :multi:
One in Stainless One in Black oxide :)
Camo, orange, green, tan, blue.... :D
-
I've purchased another pair of Leatherman multi tools today. A Skeletool and a Rebar. My Leatherman collection now stands at four multitools. My aim is to collect at least one example of each Leatherman Model. :multi:
One in Stainless One in Black oxide :)
Camo, orange, green, tan, blue.... :D
Regular pliers and Cap Crimper pliers,
Made in USA, Made in Japan,
? Different knife blades (lots, with several different shapes, tang markings and PE or CE )
No Lanyard, Small lanyard, Large lanyard
Small plier pivot, large plier pivot,
Small font on handles, Large font on handles,
With (R) mark, without (R) mark
No Pat or TM, Pat 4238862, pat 1325473
gold plated, DLC, SS, BO handles,
with, without scissors
metric or inches markings on handles
thin knurled screws, thick knurled scews, rivets (with and without hollows on rear handles)
.... and these are just some of the variations for one Leatherman model - the venerable Pocket Survival Tool or PST
-
I've purchased another pair of Leatherman multi tools today. A Skeletool and a Rebar. My Leatherman collection now stands at four multitools. My aim is to collect at least one example of each Leatherman Model. :multi:
One in Stainless One in Black oxide :)
Camo, orange, green, tan, blue.... :D
Regular pliers and Cap Crimper pliers,
Made in USA, Made in Japan,
? Different knife blades (lots, with several different shapes, tang markings and PE or CE )
No Lanyard, Small lanyard, Large lanyard
Small plier pivot, large plier pivot,
Small font on handles, Large font on handles,
With (R) mark, without (R) mark
No Pat or TM, Pat 4238862, pat 1325473
gold plated, DLC, SS, BO handles,
with, without scissors
metric or inches markings on handles
thin knurled screws, thick knurled scews, rivets (with and without hollows on rear handles)
.... and these are just some of the variations for one Leatherman model - the venerable Pocket Survival Tool or PST
Oh to just have one each of these :dd: :like: :like: :like:
-
Waiting on this beaty: BO Core with Camo sheath :drool: Being new just makes the deal a whole lot sweeter
(http://i.ebayimg.com/images/g/jp4AAOSwMVdYE9vo/s-l1600.jpg)
(http://i.ebayimg.com/images/g/crcAAOSwx2dYE9y~/s-l1600.jpg)
-
Nice score chrono :like:
-
Nice score chrono :like:
Yeah cool chrono!
-
Nice score chrono :like:
Yeah cool chrono!
Thanks, gents! :salute:
-
Oh hey. I got a wave a little while back as a gift! Hadn't used it till now because I was rocking my rebar and Michigan Jack for a month and then I did the Uber challenging minimalist challenge...
So now I've been playing with this wave. It's pretty dope!
-
I had another visit to my favourite Leatherman dealer today and came away with a Skeletool CX and a OHT.
-
Nice score :cheers:
-
Leatherman PST SS CC NIB w/Camo Sheath
(https://content-15.foto.my.mail.ru/mail/wowaboro/_myphoto/b-110.JPG) (https://content-15.foto.my.mail.ru/mail/wowaboro/_myphoto/b-110.JPG)
-
:dd: :like:
-
Some really nice scores peeps :o :cheers: :like: :like: :like:
-
Leatherman PST SS CC NIB w/Camo Sheath
Another old rare one, and NIB as a bonus ! :salute:
-
I thought I bought a pair of PSTs, just impulse purchase :P They came in today, to my surprised, one of them is a Pulse. Both in unused condition :tu:
-
I thought I bought a pair of PSTs, just impulse purchase :P They came in today, to my surprised, one of them is a Pulse. Both in unused condition :tu:
The sheaths look to be in very great shape as well :cheers: That would be an awesome day to find out you got a PST and a Pulse when you thought you were getting 2 PSTs :dd: Great find chrono :tu: :like:
-
New page banana man dance
:nanadance: :nanadance:
-
Oh to have a Rebar with the Pulse toolset :dd: Plus you would still have room for the awl and the serrated blade :o :D
I wish they offered several different configurations of the Rebar the way Vic does with the Spirit and the Swisstool :ahhh Just name them a little different like The Rebar 1 and give it the original toolset and then the Rebar 2 make it the knifeless version and the 3 and 4 could be another config with maybe I don't know :whistle: all of 1 plus scissors and a diamond file :drool: I am sure they could come up with something :pok: Come on LM give us other options with the wonder chasis that is the Rebar :ahhh
-
I thought I bought a pair of PSTs, just impulse purchase :P They came in today, to my surprised, one of them is a Pulse. Both in unused condition :tu:
That's a bummer that you didn't get what you were expecting. I feel bad for you so I will be happy to trade you a PST straight up for that Pulse :whistle:
-
I thought I bought a pair of PSTs, just impulse purchase :P They came in today, to my surprised, one of them is a Pulse. Both in unused condition :tu:
That's a bummer that you didn't get what you were expecting. I feel bad for you so I will be happy to trade you a PST straight up for that Pulse :whistle:
Deal! You meant a 10th anniversary PST, right? :cheers:
-
I thought I bought a pair of PSTs, just impulse purchase They came in today, to my surprised, one of them is a Pulse. Both in unused condition :tu:
The sheaths look to be in very great shape as well :cheers: That would be an awesome day to find out you got a PST and a Pulse when you thought you were getting 2 PSTs :dd: Great find chrono :tu: :like:
+1 - nice score chrono!
Sent from my SM-G920R4 using Tapatalk
-
Thanks, gents! :cheers:
-
I thought I bought a pair of PSTs, just impulse purchase :P They came in today, to my surprised, one of them is a Pulse. Both in unused condition :tu:
That's a bummer that you didn't get what you were expecting. I feel bad for you so I will be happy to trade you a PST straight up for that Pulse :whistle:
Deal! You meant a 10th anniversary PST, right? :cheers:
:rofl:
:like:
-
Well hello everybody I haven´t been here for a while.
During summer is the time I got to use my mt:s the most and at the same time I go pretty much offline.
The autumn is where I start to go in here and checkout and longing back to the all sunny Mt summertime.
Of some reason I didn´t this time. I´m not sure why.
But ! The other they I came across a new Rebar and got it. The new version with the cutoff file.
Receiving it made me check in here and realize I missed this placel. :cheers:
-
Welcome back Mr. B :cheers:
-
Thanks ! :cheers:
-
I think the question for me is "What are your latest Leathermen"?. This weekend I purchased a Juice C2, a Juice CS4, a Wingman, a Rev, a Wingman and finally another Surge. This brings my Leatherman Multitool collection to fourteen. :cheers:
-
I think the question for me is "What are your latest Leathermen"?. This weekend I purchased a Juice C2, a Juice CS4, a Wingman, a Rev, a Wingman and finally another Surge. This brings my Leatherman Multitool collection to fourteen. :cheers:
You, are on a roll my friend! :salute:
-
I think the question for me is "What are your latest Leathermen"?. This weekend I purchased a Juice C2, a Juice CS4, a Wingman, a Rev, a Wingman and finally another Surge. This brings my Leatherman Multitool collection to fourteen. :cheers:
You, are on a roll my friend! :salute:
I was. However I've now cleared out the entire Leatherman stock from my local dealer. He won't be ordering again until the new year. :facepalm:
-
I think the question for me is "What are your latest Leathermen"?. This weekend I purchased a Juice C2, a Juice CS4, a Wingman, a Rev, a Wingman and finally another Surge. This brings my Leatherman Multitool collection to fourteen. :cheers:
You, are on a roll my friend! :salute:
I was. However I've now cleared out the entire Leatherman stock from my local dealer. He won't be ordering again until the new year. :facepalm:
I suggest you to ask the dealer if he can give you some discount or price break. You are probably his favorite customer now :cheers:
-
:like:
I think the question for me is "What are your latest Leathermen"?. This weekend I purchased a Juice C2, a Juice CS4, a Wingman, a Rev, a Wingman and finally another Surge. This brings my Leatherman Multitool collection to fourteen. :cheers:
You, are on a roll my friend! :salute:
I was. However I've now cleared out the entire Leatherman stock from my local dealer. He won't be ordering again until the new year. :facepalm:
I suggest you to ask the dealer if he can give you some discount or price break. You are probably his favorite customer now :cheers:
Great suggestion.
-
Black Friday special! I just got a Skeletool from Home Depot.
-
Black Friday special! I just got a Skeletool from Home Depot.
:like:
-
A Charge SLV is on its way :salute:
-
Very nice catches here lately. :drool:
-
My new Super Tool showed up today, it's the one on the left. Been after this version for quite a while.
(http://i971.photobucket.com/albums/ae191/bdAmmo/IMG_2055_zpstxs7frry.jpg) (http://s971.photobucket.com/user/bdAmmo/media/IMG_2055_zpstxs7frry.jpg.html)
(http://i971.photobucket.com/albums/ae191/bdAmmo/IMG_2059_zpszrgef0mj.jpg) (http://s971.photobucket.com/user/bdAmmo/media/IMG_2059_zpszrgef0mj.jpg.html)
-
:like: :cheers: :tu:
-
:like: :cheers: :tu:
Seriously nice. Your backups have backups! :ahhh :D
-
My new Super Tool showed up today, it's the one on the left. Been after this version for quite a while.
(http://i971.photobucket.com/albums/ae191/bdAmmo/IMG_2055_zpstxs7frry.jpg) (http://s971.photobucket.com/user/bdAmmo/media/IMG_2055_zpstxs7frry.jpg.html)
(http://i971.photobucket.com/albums/ae191/bdAmmo/IMG_2059_zpszrgef0mj.jpg) (http://s971.photobucket.com/user/bdAmmo/media/IMG_2059_zpszrgef0mj.jpg.html)
Sweet collection. :cheers: Yes, what is the difference between the two cc versions ? or is it backup .
-
I see one with rounder CC than the other. Interesting >:D
-
I see one with rounder CC than the other. Interesting >:D
You are wright . Good eye. :salute:
-
Soooo. This just happened! :D
-
My new Super Tool showed up today, it's the one on the left. Been after this version for quite a while.
(http://i971.photobucket.com/albums/ae191/bdAmmo/IMG_2055_zpstxs7frry.jpg) (http://s971.photobucket.com/user/bdAmmo/media/IMG_2055_zpstxs7frry.jpg.html)
(http://i971.photobucket.com/albums/ae191/bdAmmo/IMG_2059_zpszrgef0mj.jpg) (http://s971.photobucket.com/user/bdAmmo/media/IMG_2059_zpszrgef0mj.jpg.html)
Those are all very nice looking :dd: :like: :like: :like:
-
I often miss this thread because I haven't bought a new LM for myself in a while :facepalm: Great to see you Mr. B :like: :like: :like:
-
My latest is a sidekick, kindly sent to me by Kampfer in the 2016 secret santa
(https://c2.staticflickr.com/6/5740/31306665066_e3098946c4_b.jpg)
-
DMAX Signal and Skeletool
-
DMAX Signal and Skeletool
What is the "DMAX" signal? Is that a particular side run or a branded leatherman?
-
I have been going a little hog wild lately buying multitools. Was just cruising around on the internet and someone posted a NIB leatherman juice SC2 along with a micra in the same blister packaging. I convinced myself to buy it because it was $50 and discontinued, even though I have really no need for the thing as I have the juice S2 and a micra.
-
What is the "DMAX" signal? Is that a particular side run or a branded leatherman?
Looks like it is a promotion for a German TV channel:
http://forum.multitool.org/index.php/topic,68671.0.html
-
What is the "DMAX" signal? Is that a particular side run or a branded leatherman?
Looks like it is a promotion for a German TV channel:
http://forum.multitool.org/index.php/topic,68671.0.html
What he said. There are basically two difference to your regular tools.
Large DMAX logo on the blade.
Skeletool frame is black/dark-orange with silver tools/springs
Signal, everything that is normally yellow is dark-orange
-
My wife & I stopped at an antique/used furniture store today. They had a table of tools. There was an el-cheapo nylon sheath, I opened it and found a May 2001 Wave, dirty but mechanically very nice. I asked how much---$9. That was the fastest I ever pulled out my wallet.
-
Sweet score cb :cheers:
-
Sweet score cb :cheers:
+1 great stuff by quite a few of you as well :like:
-
I received a wonderful little Style PS for Christmas:
(https://2.bp.blogspot.com/-iirFQstKcQM/WFptv5NcsyI/AAAAAAAAwXE/Bw0H7GLjKRwOS9jX44EMmAu07zhhG-5LQCPcB/s1600/upload_-1)
-
Another hats off to Kampf
how many has he gifted already? :cheers:
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2016-12/20161222_132225_zpsewc2mv1p.jpg)
-
This is my latest along with a few other BO LM :tu: Had it for a couple weeks now :tu:
(https://c2.staticflickr.com/1/256/30994930393_518d2345fd_z.jpg) (https://flic.kr/p/PdV7XB)20161222_090109 (https://flic.kr/p/PdV7XB) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
-
two of their best ones!
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-01/20170117_185149_zpsxfmhuywp.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-01/20170117_185209_zps4s6xqhp3.jpg)
-
two of their best ones!
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-01/20170117_185149_zpsxfmhuywp.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-01/20170117_185209_zps4s6xqhp3.jpg)
Great pics Peacent :cheers: Gotta love the Rebar :dd: :like: :like:
-
I received a wonderful little Style PS for Christmas:
(https://2.bp.blogspot.com/-iirFQstKcQM/WFptv5NcsyI/AAAAAAAAwXE/Bw0H7GLjKRwOS9jX44EMmAu07zhhG-5LQCPcB/s1600/upload_-1)
I have to say the Style PS is my most carried and used Leatherman of all time. It holds a special place in my heart. :dd:
-
Today's mail call was good to me, yielding an armful of packages. Two of those packages contained original orange Juice S2s, both in excellent condition! This makes six Juice S2 models! I need to stop or I will catch up with my SAK Explorer purchases!
-
new and more LMs! I'm in a LM kick as of late, thanks to some members here :ahhh
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-01/20170120_150808_zpsea0yqyf4.jpg)
-
Yet another Orange Juice arrived in today's mail!
Coincidently, the Juice belt pouch I ordered arrived at the same time.
I already have some paracord attached...
-
Just got the CX...i cant wait to field test it.
-
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-01/20170124_131149_zpsntstswfu.jpg)
-
Another Signal, the Yellow one is the new one
-
got a New ES4 today, an advertising piece
(http://i833.photobucket.com/albums/zz255/detronphillips/Mobile%20Uploads/20170131_210303.jpg) (http://s833.photobucket.com/user/detronphillips/media/Mobile%20Uploads/20170131_210303.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/Mobile%20Uploads/20170131_210341.jpg) (http://s833.photobucket.com/user/detronphillips/media/Mobile%20Uploads/20170131_210341.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/Mobile%20Uploads/20170131_210319.jpg) (http://s833.photobucket.com/user/detronphillips/media/Mobile%20Uploads/20170131_210319.jpg.html)
(http://i833.photobucket.com/albums/zz255/detronphillips/Mobile%20Uploads/20170131_210421.jpg) (http://s833.photobucket.com/user/detronphillips/media/Mobile%20Uploads/20170131_210421.jpg.html)
as an IT geek, I like this advertising, I wish it was Raspberry Pi instead, but pretty cool.
-
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-02/20170201_085657_zpsue6am4nk.jpg)
-
Just got my first PST II and I love it. It's small, sturdy, nice tool selection.
(http://i441.photobucket.com/albums/qq140/smcclown/20170202_210522.jpg) (http://s441.photobucket.com/user/smcclown/media/20170202_210522.jpg.html)
(http://i441.photobucket.com/albums/qq140/smcclown/20170202_210711.jpg) (http://s441.photobucket.com/user/smcclown/media/20170202_210711.jpg.html)
-
:like: :cheers: :tu:
-
Finally got this new surge :tu:
(http://i306.photobucket.com/albums/nn243/teofiloeugeniopanganiban/20170204_193926.jpg) (http://s306.photobucket.com/user/teofiloeugeniopanganiban/media/20170204_193926.jpg.html)
-
I'm wishing I had gone for the black oxide surge instead. Maybe after I get the crunch will opt for it then.
Sent from my iPhone using Tapatalk
-
I'm wishing I had gone for the black oxide surge instead. Maybe after I get the crunch will opt for it then.
Sent from my iPhone using Tapatalk
You won't go wrong with it, Nidana. :tu:
It's my edc now.
(http://i306.photobucket.com/albums/nn243/teofiloeugeniopanganiban/20170205_134359.jpg) (http://s306.photobucket.com/user/teofiloeugeniopanganiban/media/20170205_134359.jpg.html)
(http://i306.photobucket.com/albums/nn243/teofiloeugeniopanganiban/20170205_134248.jpg) (http://s306.photobucket.com/user/teofiloeugeniopanganiban/media/20170205_134248.jpg.html)
-
Nice :like: :tu:!
-
Some very awesome pics and LM in here since last time I visited :o :like: :like: :like:
-
Nice LMs
-
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-02/20170203_102346_zpscn1ubyg1.jpg)
-
aaand got this an hour ago!
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-02/IMG-20170205-WA0010_zps5eh3fj3m.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-02/IMG-20170205-WA0009_zpsswc5sdw3.jpg)
-
Cabela's Legacy 45th Anniversary Limited Edition PST / 160 of 500
(https://content-2.foto.my.mail.ru/mail/wowaboro/_myphoto/b-195.JPG) (https://content-2.foto.my.mail.ru/mail/wowaboro/_myphoto/b-195.JPG)
-
:like: :cheers: :tu:
-
Cabela's Legacy 45th Anniversary Limited Edition PST / 160 of 500
(https://content-2.foto.my.mail.ru/mail/wowaboro/_myphoto/b-195.JPG) (https://content-2.foto.my.mail.ru/mail/wowaboro/_myphoto/b-195.JPG)
One nice looking MT :tu: :tu:
-
know that I'm still very grateful for the Skele you gifted me, folks! :cheers:
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-04/20170420_102736_zpsbfupe0ex.jpg)
-
BO wave modded with a rebar plier head
(https://c1.staticflickr.com/5/4178/34447091206_99ed85f833_c.jpg)
-
My Rebar got a big brother in the mail today!
(http://i.imgur.com/0JUsEc6.jpg)
-
Cabela's Legacy 45th Anniversary Limited Edition PST / 160 of 500
(https://content-2.foto.my.mail.ru/mail/wowaboro/_myphoto/b-195.JPG) (https://content-2.foto.my.mail.ru/mail/wowaboro/_myphoto/b-195.JPG)
So it was you :cheers: $202 was a bit rich for me with some laser etching and color printing on a standard PST. What is the date code on that piece?
-
Cabela's Legacy 45th Anniversary Limited Edition PST / 160 of 500
(https://content-5.foto.my.mail.ru/mail/wowaboro/_myphoto/b-199.JPG) (https://content-5.foto.my.mail.ru/mail/wowaboro/_myphoto/b-199.JPG)
So it was you :cheers: $202 was a bit rich for me with some laser etching and color printing on a standard PST. What is the date code on that piece?
Yes, it was me :cheers:
Maybe you right about $202, but, if I remember correctly, MSRP in 2006 was ~$150, so overprice is not too much :P
In addition, "color printing" - it's 24K gold plated 8)
Date codes: 1004 1004
-
(http://i.imgur.com/52EzqEhh.jpg)
-
Just got this signal in the mail today :mail: Time to SIGNAL the other MTs! :D
-
:like: :tu:
-
Thanks Steve! :salute:
-
Got three new (to me) Leathermans yesterday. Second hand but in great condition. The most recent ones could pass for new.
8) 8)
I also discovered something interesting when I put them near the ones I already got:
(https://media.makeameme.org/created/i-dont-always-598c39.jpg)
-
So it's technically new due to LM warranty ;-)
I knew this was a possibility when I didn't check the "this is special to me- don't replace" box on the warranty form. My Charge Ti has been sent back, replaced with a TTi.
I am torn... happy to have a newer MT with an s30v blade and gut hook... but the saw feels thinner and flimsier and my loose opening plier head is now a stiff opening one. It's not gritty, just stiff.
I only bring this up because mostly all LMs I have purchased brand new are loose and free ... while the warranty replacements I have received (a couple) usually are stiff. Just an observation.
Any thoughts from anyone on the TTi... promise I'm not griping; I love it! Just want some input from the community :-)
(https://uploads.tapatalk-cdn.com/20170822/a2aa8b97002af7abe71a154f67c2c28f.jpg)
(https://uploads.tapatalk-cdn.com/20170822/ba1344a0b59b61dad1b9bbb16802422d.jpg)
(https://uploads.tapatalk-cdn.com/20170822/0ccd9ddc97bdcf3c1bfa924b28c7b464.jpg)
(https://uploads.tapatalk-cdn.com/20170822/c59b7133b9ebd36463bd17a5d5404004.jpg)
Sent from my iPhone using Tapatalk
-
So it's technically new due to LM warranty ;-)
I knew this was a possibility when I didn't check the "this is special to me- don't replace" box on the warranty form. My Charge Ti has been sent back, replaced with a TTi.
I am torn... happy to have a newer MT with an s30v blade and gut hook... but the saw feels thinner and flimsier and my loose opening plier head is now a stiff opening one. It's not gritty, just stiff.
I only bring this up because mostly all LMs I have purchased brand new are loose and free ... while the warranty replacements I have received (a couple) usually are stiff. Just an observation.
Any thoughts from anyone on the TTi... promise I'm not griping; I love it! Just want some input from the community :-)
(https://uploads.tapatalk-cdn.com/20170822/a2aa8b97002af7abe71a154f67c2c28f.jpg)
(https://uploads.tapatalk-cdn.com/20170822/ba1344a0b59b61dad1b9bbb16802422d.jpg)
(https://uploads.tapatalk-cdn.com/20170822/0ccd9ddc97bdcf3c1bfa924b28c7b464.jpg)
(https://uploads.tapatalk-cdn.com/20170822/c59b7133b9ebd36463bd17a5d5404004.jpg)
Sent from my iPhone using Tapatalk
Mine was stiff and gritty when I got it. So I cleaned it up. And after six months of very light use, it opens up smoothly :tu:
-
So it's technically new due to LM warranty ;-)
I knew this was a possibility when I didn't check the "this is special to me- don't replace" box on the warranty form. My Charge Ti has been sent back, replaced with a TTi.
I am torn... happy to have a newer MT with an s30v blade and gut hook... but the saw feels thinner and flimsier and my loose opening plier head is now a stiff opening one. It's not gritty, just stiff.
I only bring this up because mostly all LMs I have purchased brand new are loose and free ... while the warranty replacements I have received (a couple) usually are stiff. Just an observation.
Any thoughts from anyone on the TTi... promise I'm not griping; I love it! Just want some input from the community :-)
(https://uploads.tapatalk-cdn.com/20170822/a2aa8b97002af7abe71a154f67c2c28f.jpg)
(https://uploads.tapatalk-cdn.com/20170822/ba1344a0b59b61dad1b9bbb16802422d.jpg)
(https://uploads.tapatalk-cdn.com/20170822/0ccd9ddc97bdcf3c1bfa924b28c7b464.jpg)
(https://uploads.tapatalk-cdn.com/20170822/c59b7133b9ebd36463bd17a5d5404004.jpg)
Sent from my iPhone using Tapatalk
Mine was stiff and gritty when I got it. So I cleaned it up. And after six months of very light use, it opens up smoothly :tu:
Yeah, just using it today some of the tools have already loosened up. Just gotta get her cleaned and moving!
Sent from my iPhone using Tapatalk
-
All my new Leathermans (which isn't many) have had stiff pliers initially.
-
All my new Leathermans (which isn't many) have had stiff pliers initially.
Likewise on the "few new." I've purchased a BO Wave and a Rebar; all my others were purchased elsewhere. The rebar for sure had smooth loose movement. Can't remember how the wave was out the box... actually my skele CX was new too and those were stiff... and my first LM was new; a wingman and those are a different story. So four NIB ones and many others used.
Just gonna work em in and get them well oiled and used.
Sent from my iPad using Tapatalk
-
This Leatherman Juice B2 knife.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4345small_zpsuemwisez.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4345small_zpsuemwisez.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4347small_zpsi3bob8sf.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4347small_zpsi3bob8sf.jpg.html)
:think:
-
(http://i.imgur.com/qNMZhZa.jpg)
-
Nice one Sparky and sweet pic as well ! :like: :tu:
-
Thanks Steve, not a terrible day to be pushing a lawnmower about :D
-
Great pics of some great looking LM :dd: :like:
-
Outstanding Pic :tu:
-
There are lots of outstanding picture in this thread :salute:
I wish I could take one like this :dd: :dd:
(https://uploads.tapatalk-cdn.com/20170822/0ccd9ddc97bdcf3c1bfa924b28c7b464.jpg)
:cheers:
-
There are lots of outstanding picture in this thread :salute:
I wish I could take one like this :dd: :dd:
(https://uploads.tapatalk-cdn.com/20170822/0ccd9ddc97bdcf3c1bfa924b28c7b464.jpg)
:cheers:
Thanks Sparky! I really appreciate that!
Sent from my iPhone using Tapatalk
-
There are lots of outstanding picture in this thread :salute:
I wish I could take one like this :dd: :dd:
(https://uploads.tapatalk-cdn.com/20170822/0ccd9ddc97bdcf3c1bfa924b28c7b464.jpg)
:cheers:
Thanks Sparky! I really appreciate that!
Sent from my iPhone using Tapatalk
I really mean that :salute: I have no end of problems taking a good picture of a cutting edge
For all my pictures I tend to leave it on automatic and take 5 or so pictures varying the angle and messing with the lighting, sometimes works :)
-
There are lots of outstanding picture in this thread :salute:
I wish I could take one like this :dd: :dd:
(https://uploads.tapatalk-cdn.com/20170822/0ccd9ddc97bdcf3c1bfa924b28c7b464.jpg)
:cheers:
Thanks Sparky! I really appreciate that!
Sent from my iPhone using Tapatalk
I really mean that :salute: I have no end of problems taking a good picture of a cutting edge
For all my pictures I tend to leave it on automatic and take 5 or so pictures varying the angle and messing with the lighting, sometimes works :)
Absolutely! I just have fun focusing on a couple different spots and seeing what look it gives! It's a fun process. Options are good :-)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171109/837fab6f34e330ceef0eb25b36831aad.jpg)
-
My latest (https://uploads.tapatalk-cdn.com/20171110/1c580a5425bc24b34e0c823d782998db.jpg)
Sent from my iPhone using Tapatalk
-
Nice ones you two ! :like: :tu:
-
Wow, I didn't know that was a thing. That's pretty sweet. :like:
-
That skele is super sick!! Whoa, id definitley sport that. But I got something else new just the other day, it's in my backpack, still unopened as a matter of fact... :whistle:
-
Skeletool CX, it feels like a modern Sideclip with a real blade!
-
Well I kind of stole this, thanks Luke, delivered to omy door for the grand total of £68.90. Now standard reatil for this in the UK is £208.00 so it was a 72% saving.
(http://image.ibb.co/e4rTcm/20171128_155809030_i_OS.jpg)
-
Got a nice Leatherman Super Tool 200 for 9 bucks at the local pawn shop. They wanted 25 dollars for a Gerber Suspension. :facepalm:
-
Just received my Squirt S4 and Style PS.
-
This:
(https://uploads.tapatalk-cdn.com/20171216/5c585ba1219f693b9eedfc619013f165.jpg)
Sent on my SM-G930F with Tapatalk
-
Scored this Mini tool for less than $30 :tu:
-
Great score Steve! :like: :tu: :tu:
-
Great score Steve! :like: :tu: :tu:
Agreed :like: in good shape too it seems :gimme:
-
:cheers:
-
I think I was watching that auction, Steve :D Nice one :cheers:
-
I am cursed this week. A seller canceled a sale of Charge Tti Camo, and another seller seems to ship an original Wave to wrong address. Worse yet, it is shown delivered days ago. Not sure whether I can get my tool or money back. I would rather have the Wave... :poh:
-
Good luck chrono, hope you get those tools.
This is my latest, not counting that wave plus, that hasn’t come yet. Thanks again to Poncho for his advise and thoughts on this tool.
-
I am cursed this week. A seller canceled a sale of Charge Tti Camo, and another seller seems to ship an original Wave to wrong address. Worse yet, it is shown delivered days ago. Not sure whether I can get my tool or money back. I would rather have the Wave... :poh:
Was that on eBay? I think it was on my watch list....
-
Good luck chrono, hope you get those tools.
This is my latest, not counting that wave plus, that hasn’t come yet. Thanks again to Poncho for his advise and thoughts on this tool.
Sweet score !
-
I am cursed this week. A seller canceled a sale of Charge Tti Camo, and another seller seems to ship an original Wave to wrong address. Worse yet, it is shown delivered days ago. Not sure whether I can get my tool or money back. I would rather have the Wave... :poh:
Was that on eBay? I think it was on my watch list....
Was that the Charge with the older scales? That sucks.. Did he give any reasons for that?
-
Good luck chrono, hope you get those tools.
This is my latest, not counting that wave plus, that hasn’t come yet. Thanks again to Poncho for his advise and thoughts on this tool.
Sweet score !
Thanks Steve
-
Good luck chrono, hope you get those tools.
This is my latest, not counting that wave plus, that hasn’t come yet. Thanks again to Poncho for his advise and thoughts on this tool.
Sweet score !
Glad I could help and it looks great :cheers: :like:
-
Sorry to hear it chrono :like: Hope you can get either the Wave back or at least your money and sorry to hear about the canceled order as well :-\
-
Thanks for asking, guys! For the Charge Camo with older scales, seller claimed it was misplaced and was not able to locate it. He was polite, so I could not bring myself to leave anything bad on his feedback score. He would contact me if happening to find its whereabouts.
For the Wave, the USPS driver screwed up. He mis-scanned it as "delivered" when doing his route. So it is somewhere in one of the local businesses. I called USPS a few days ago, and got a call back from the local branch today. They left the business (where they believe dropping my tool by mistake) a message to see if they can retrieve the package. There are more than the Wave in it. I cross my fingers, hoping it will find its way back to me unharmed. I rather have the package than any refund money.
On another note, if you guys sell thing on eBay, consider following recommendations:
- Make your USPS shipping label with Paypal, do not hand write the address and pay at the PO.
- Unless you sell fragile stuffs, spend the extra money (if you have to) on delivery confirmation, not insurance, if you want to be 100% sure it get to the recipient
- Be professional, if you do not make labels with Paypal, provide your buyers with tracking number. Do not wait until they ask you "where the hell is my stuff?"
As I am typing this message, eBay closed my case, for the tracking number showing the items delivered. I don't blame the seller, as he did his due diligence, but why do I have to take the hit when the carrier screwed up? >:( I made an appeal.
-
Just an update: I finally received the OG Wave :mail: That has been over 3 weeks. :P, but seeing this baby makes it worth the hassle.
When I appealed the case, eBay allowed me 5 days to provide proof of the mis-ship. Luckily, USPS came thru when I was on the 3rd day.
-
That’s great! Enjoy!
:like:
-
I have ordere an OHT, just to see what it can. I have this thing, to review the LMN tools on youtube in romanian ( i'm from Romania, Land of Dracula, Europe)
-
New ultra small PST arrived to me :D
(https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG) (https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG)
-
New ultra small PST arrived to me :D
(https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG) (https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG)
:o :o :o
-
New ultra small PST arrived to me :D
(https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG) (https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG)
Oh, good. Glad you explained that one. Otherwise, I would have thought you have REALLY BIG hands. :D
-
Oh, good. Glad you explained that one. Otherwise, I would have thought you have REALLY BIG hands. :D
It's just a lapel pin :D
-
Wave + laser etched with "Marine Corps" is on the way.
-
Wave + laser etched with "Marine Corps" is on the way.
:tu:
-
New ultra small PST arrived to me :D
(https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG) (https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG)
that's what I call "miniaturisation" :rofl: :rofl:
:like:
-
New ultra small PST arrived to me :D
(https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG) (https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG)
that's what I call "miniaturisation" :rofl: :rofl:
:like:
Wowaboro thought Downsizing was a real thing, and he's been trying to prepare for it :rofl:
(https://s3.amazonaws.com/images.charitybuzz.com/images/320232/original.jpeg)
-
I picked up a Brewzer as a throw in with my bucktool 360.
-
It's just a mystery :think:
On today, my PST's collection was exactly the 142 items.
And today I picked up a package with Collector's Edition PST.
I was very interested what serial number (from 500) I will get.
What do you think the number was on it?
That's right - #142 :D
(https://content-15.foto.my.mail.ru/mail/wowaboro/490/b-525.JPG) (https://content-15.foto.my.mail.ru/mail/wowaboro/490/b-525.JPG)
-
Finally, after going through most models, the MINI!! :ahhh is on my hands
new owner thanks to our friend jcs0001
(https://i.imgur.com/DBl2DtD.jpg)
he also added a custom fit leather slip/pouch for it! :o
(https://i.imgur.com/AitMAvQ.jpg)
-
Sweet ! :like: :cheers: :tu:
-
Finally......got my first ES4!
(https://lh3.googleusercontent.com/WI6Bg5pgIDjGqV5VQrJSUoX_TsouoaUzwQEWNGH5vur1nd_SRAg7PJ8ZGr4f7v9w89WiRYIcyclhaH47-vukQYEL4BHup2l45Iyu62PD68UzhMmAC4eghZZDlSHXmrJKn8gIggNLb0k=w589-h784-no)
......also have an ST300 and Kick both arriving today, thanks to a little 1AM Ebay browsing... :cheers:
-
Finally, after going through most models, the MINI!! :ahhh is on my hands
new owner thanks to our friend jcs0001
(https://i.imgur.com/DBl2DtD.jpg)
he also added a custom fit leather slip/pouch for it! :o
(https://i.imgur.com/AitMAvQ.jpg)
Nice stuff, Peacent!
-
It's just a mystery :think:
On today, my PST's collection was exactly the 142 items.
And today I picked up a package with Collector's Edition PST.
I was very interested what serial number (from 500) I will get.
What do you think the number was on it?
That's right - #142 :D
(https://content-15.foto.my.mail.ru/mail/wowaboro/490/b-525.JPG) (https://content-15.foto.my.mail.ru/mail/wowaboro/490/b-525.JPG)
Wow, WOW!
-
I was at a local mom and pop Tru value hardware store this morning looking for round brass plugs and a stamping kit (to make dog tags for my dog that will last him for years and years).
Browsing the isle, it called to me and I saw it...
A brand new in blister pack, new old stock, still stocked on the rack, all by itself, Leatherman PSTII, with leather sheath complete with dust. Been there some 17 years. None other to be found on the store. I had to take a picture and double check. I had never seen this color sceme of package before. Black stripe across the top, the rest of the package printing is orange but fading as you scan to the right, where a grid pattern emerges.
I thought it might be a knock off. Double checked. Nope. It was real. Flipped the pack over and saw it was dated 2001.
I tried to resist, but the thought of someone else coming into the store five minutes after I left and buying it, was just too much.
$50 gone and one museum quality PSTII acquired. I think it will stay new in blister pack.
And the file is too large to attach! C'mon!
-
Here
-
Man that's some new old stock. Where did you find that one?
-
Nice score TB ! :cheers: :tu:
-
Man that's some new old stock. Where did you find that one?
Thanks Greg
Found it at a True Value hardware store., of all places. I almost smurfed myself when I saw it there. All alone. No other Leathermans around, never mind more PSTII's. Nothing in terms of multi tools. This was dusty. It may have been there 17 years but I didn't want to leave it for the next guy to get it, so I shelled out for it.
-
Nice score TB ! :cheers: :tu:
Thanks Steve. Had I known it was there two months ago, I would not have needed to seek one out in the tools needed section. Sure surprised the tar outta me to see it there. Haven't been to this store in years
-
This particular hardware store is family owned since "1950." Quotes around 1950 because they were doing business there in the late 40's.
The owner's father started the place, and the owner was there with his grown son.
Gonna try to take my hardware store business there as much as possible.
-
Here
Congratulations on the find ThundahBeagle ! :like: :tu: :tu:
That is one of those deals you dream of finding.
-
:D
-
Size reference. :D. US Dime and MiniChamp 58mm.
-
Skeletool(https://uploads.tapatalk-cdn.com/20180327/76b1ffb096122fd5906643bda8838440.jpg)(https://uploads.tapatalk-cdn.com/20180327/0c61210f300672e627b38cba47860e1d.jpg)
Sent fra min FRD-L09 via Tapatalk
-
Skeletool(https://uploads.tapatalk-cdn.com/20180327/76b1ffb096122fd5906643bda8838440.jpg)(https://uploads.tapatalk-cdn.com/20180327/0c61210f300672e627b38cba47860e1d.jpg)
Sent fra min FRD-L09 via Tapatalk
putting it to good use already :D :salute:
-
Skeletool(https://uploads.tapatalk-cdn.com/20180327/76b1ffb096122fd5906643bda8838440.jpg)(https://uploads.tapatalk-cdn.com/20180327/0c61210f300672e627b38cba47860e1d.jpg)
Sent fra min FRD-L09 via Tapatalk
putting it to good use already :D :salute:
Had to try it And gave it a good clean between jobs today also
Sent fra min FRD-L09 via Tapatalk
-
My friend owns a gun shop and had this on a shelf for a long long time till I spotted it.
He gave it to me. NIB.
(https://uploads.tapatalk-cdn.com/20180406/103961421038555147291e8e0e496300.jpg)
Sent from my iPhone using Tapatalk
-
Sweet score!
Sent from my iPhone using Tapatalk
-
Sweet! Love seeing this NOS Leatherman stuff.
Only NOS Leatherman I have seen on the shelf was a P4. It was marked $14.99 and rang up for $8.99! Still have it NIB. :D
-
Another PST added to the pile :D
-
(https://i.imgur.com/hEXNxNs.png)
-
New ultra small PST arrived to me :D
(https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG) (https://content-16.foto.my.mail.ru/mail/wowaboro/258/b-522.JPG)
New wearable multi-tool: PST earrings :like:
-
Another PST added to the pile :D
:tu:
And the pile will be two higher in the near future :D
-
Well, I just couldn’t help myself. Picked up a like new second gen Wave, dated 11/16, off of eBay.
Came today and you cannot tell it is not new out of the box. New style sheath and all. Very tight. No scratches.
Been setting here working it, getting some lube in the pivots and slightly adjusting the screws. Will still take some time to break it in.
This makes two in my collection, thought it is actually my fourth. I have my OG Wave from the early days. I had picked up a spare but sold it a while back.
I had also bought a second gen bo Wave in 2015 and sold it in 2016. I decided I wanted a second gen again. Not really interested in the Wave + and I got this new Wave for reasonable price. I really wanted it for the ability to quickly add or remove the pocket clip. Haha
(https://uploads.tapatalk-cdn.com/20180516/26a24c0c116d766d22e82e49efe6b2d1.jpg)
(https://uploads.tapatalk-cdn.com/20180516/151cbf24b6c22d5988b17e1396a2895f.jpg)
(https://uploads.tapatalk-cdn.com/20180516/a39ebe75bbeb4be743ff9e69af14750d.jpg)
Sent from my iPhone using Tapatalk
-
Here's my latest one!... I just couldn't resist :facepalm:...So, I went ahead and purchased the LM Micra Heritage ONLY because of the cute little leather sheath, now is part of my "mini" trio collection :D
(https://imageshack.com/a/img921/9279/1A9xSD.jpg)(https://imageshack.com/a/img921/1804/gFFoaf.jpg)(https://imageshack.com/a/img923/8649/cFanYm.jpg)
-
Just picked up these two for $20 CAD each at Walmart, they're having them on clearance. I already own the original Wingman, but $20 just can't be passed up. :tu:
-
:like: Great find at a great price for a great tool! :tu:
-
Just picked up these two for $20 CAD each at Walmart, they're having them on clearance. I already own the original Wingman, but $20 just can't be passed up. :tu:
That was the first sip of this MT addition I took :whistle:. Nice price on two underrated tools.
-
Here's my latest one!... I just couldn't resist :facepalm:...So, I went ahead and purchased the LM Micra Heritage ONLY because of the cute little leather sheath, now is part of my "mini" trio collection :D
(https://imageshack.com/a/img921/9279/1A9xSD.jpg)(https://imageshack.com/a/img921/1804/gFFoaf.jpg)(https://imageshack.com/a/img923/8649/cFanYm.jpg)
:like: I am really liking this Heritage Micra with leather sheath.
-
A '97 pst for me as of late. I do have the new Charge plus and a '99 Supertool currently being delivered though The new heritage offerings i see on LM .com are enticing, usa made sheaths look really nice. :gimme:
-
Just wasted $70 plus shipping for a new Charge Tti :P
-
Here's my latest one!... I just couldn't resist :facepalm:...So, I went ahead and purchased the LM Micra Heritage ONLY because of the cute little leather sheath, now is part of my "mini" trio collection :D
(https://imageshack.com/a/img921/9279/1A9xSD.jpg)(https://imageshack.com/a/img921/1804/gFFoaf.jpg)(https://imageshack.com/a/img923/8649/cFanYm.jpg)
:like: I am really liking this Heritage Micra with leather sheath.
Yes.
Wonder if LM will ever sell just the sheaths.
-
Here's my latest one!... I just couldn't resist :facepalm:...So, I went ahead and purchased the LM Micra Heritage ONLY because of the cute little leather sheath, now is part of my "mini" trio collection :D
(https://imageshack.com/a/img921/9279/1A9xSD.jpg)(https://imageshack.com/a/img921/1804/gFFoaf.jpg)(https://imageshack.com/a/img923/8649/cFanYm.jpg)
Is that Micra sheath wearable?
-
Here's my latest one!... I just couldn't resist :facepalm:...So, I went ahead and purchased the LM Micra Heritage ONLY because of the cute little leather sheath, now is part of my "mini" trio collection :D
(https://imageshack.com/a/img921/9279/1A9xSD.jpg)(https://imageshack.com/a/img921/1804/gFFoaf.jpg)(https://imageshack.com/a/img923/8649/cFanYm.jpg)
Is that Micra sheath wearable?
Nope!..No belt loop >:(
(https://imageshack.com/a/img924/8530/zIwd7y.png)
-
You Guys are picking up some cool gear! :salute:
I picked these up at the weekend, (I just added the little yellow bit holder and 1/4'' spanner)
It's a1996 super tool
(https://i.imgur.com/6Tyfe4M.jpg)
-
You Guys are picking up some cool gear! :salute:
I picked these up at the weekend, (I just added the little yellow bit holder and 1/4'' spanner)
It's a1996 if that's important
(https://i.imgur.com/6Tyfe4M.jpg)
IF it is important!
We are all about vintage tools around here.
Heck we even let Steve C stick around and he is the definition of vintage tool.
-
I was just revising that as you typed Harley :-[
Added; well he is very old :whistle:
-
You Guys are picking up some cool gear! :salute:
I picked these up at the weekend, (I just added the little yellow bit holder and 1/4'' spanner)
It's a1996 super tool
(https://i.imgur.com/6Tyfe4M.jpg)
Nice ! :like: :tu:
-
You Guys are picking up some cool gear! :salute:
I picked these up at the weekend, (I just added the little yellow bit holder and 1/4'' spanner)
It's a1996 if that's important
(https://i.imgur.com/6Tyfe4M.jpg)
IF it is important!
We are all about vintage tools around here.
Heck we even let Steve C stick around and he is the definition of vintage Cool.
FTFY :D
-
You Guys are picking up some cool gear! :salute:
I picked these up at the weekend, (I just added the little yellow bit holder and 1/4'' spanner)
It's a1996 if that's important
(https://i.imgur.com/6Tyfe4M.jpg)
IF it is important!
We are all about vintage tools around here.
Heck we even let Steve C stick around and he is the definition of vintage Cool.
FTFY :D
Way better! :cheers:
-
Guess where I found this? Craigslist ;)
-
Ooooh....
-
Guess where I found this? Craigslist ;)
What model is that? Never seen one before
Sent fra min FRD-L09 via Tapatalk
-
Guess where I found this? Craigslist ;)
What model is that? Never seen one before
Sent fra min FRD-L09 via Tapatalk
That's one of the two LM oriented to gardening tasks, the Vista and Genus :salute:
-
Guess where I found this? Craigslist ;)
What model is that? Never seen one before
Sent fra min FRD-L09 via Tapatalk
That's one of the two LM oriented to gardening tasks, the Vista and Genus :salute:
Cool
Sent fra min FRD-L09 via Tapatalk
-
Hybrid / Vista Owners' Club: https://forum.multitool.org/index.php/topic,66907.msg1288052.html#msg1288052
That's one of the two LM oriented to gardening tasks, the Vista and Genus :salute:
... except the Vista is really for bird shooting rather than gardening.
-
Guess where I found this? Craigslist ;)
What model is that? Never seen one before
That's one of the two LM oriented to gardening tasks, the Vista and Genus :salute:
Actually the yellow handled tool in the picture is a LM Hybrid gardening MT
(the LM Vista has green handles and as syncop8r says, it has a different tool load)
-
Guess where I found this? Craigslist ;)
What model is that? Never seen one before
That's one of the two LM oriented to gardening tasks, the Vista and Genus :salute:
Actually the yellow handled tool in the picture is a LM Hybrid gardening MT
(the LM Vista has green handles and as syncop8r says, it has a different tool load)
Still cool to see some more unusual tools
Sent fra min FRD-L09 via Tapatalk
-
Actually the yellow handled tool in the picture is a LM Hybrid gardening MT
Oops, how did I miss that? :-[
-
so I got the name wrong, but its uses right :facepalm:
Go figure :D
-
Great find chrono :o :like: :like:
-
(https://i.imgur.com/9vgkybzh.jpg)
-
Well got a spending spree lately...
First i decided to get a Skeletool CX to e carried when wearing shorts, my wave and bit kit etc in my skinth were to bulky on my hip.
(https://uploads.tapatalk-cdn.com/20180729/e4c56adc52166978b9891c5ac88d8c8d.jpg)
Then i read about the crunch and decided that would be a great addition to my tools, so,i ordered it.
(https://uploads.tapatalk-cdn.com/20180729/26db9bd7a981ed73f3ab092aaa160baa.jpg)
Well when having the skeletool around in my pocket i can do with most of the days. But sometimes you need more, or 2 tools at the same time, and i wanted it not to be too exsmurfve, because it will be in my car or work bag most of the time. That was where the rebar came in. The sheath of the skeletool was perfect for it, because the rebar came in a small leather one, and the skeletool had the big nylon :)
(https://uploads.tapatalk-cdn.com/20180729/65fd33b04abd0ecfa8f7c8c5a5dcc34c.jpg)
-
Wave my first leatherman 7/29/18
-
:like:
-
Well another addition bought yesterday .. wanted a special edition silver black beacuse of the looks.. thought about buying another rebar in BO to roll my own, but i then realized i had no big one yet... the surge black and silver came to the rescue (it was on sale too)
And a big thanks for my GF understanding my needs..
Here together with my Skeletool
(https://uploads.tapatalk-cdn.com/20180807/f8fb25b908771d17a916c48c3794467f.jpg)
-
I have just bought a LM Wave + :D :tu:
-
I have just bought a LM Wave + :D :tu:
:multi: :ahhh :like: :pok: Action :rofl:
-
I have just bought a LM Wave + :D :tu:
:multi: :ahhh :like: :pok: Action :rofl:
:rofl: :rofl: I haven’t even had the time yet
to test everything give me a chance :ahhh :ahhh
-
I have just bought a LM Wave + :D :tu:
:multi: :ahhh :like: :pok: Action :rofl:
:rofl: :rofl: I haven’t even had the time yet
to test everything give me a chance :ahhh :ahhh
Dont make me post other pic :pok: :rofl: :rofl: :rofl: :rofl: :rofl:
-
I have just bought a LM Wave + :D :tu:
Congrats ! :tu:
-
I have just bought a LM Wave + :D :tu:
:multi: :ahhh :like: :pok: Action :rofl:
:rofl: :rofl: I haven’t even had the time yet
to test everything give me a chance :ahhh :ahhh
Dont make me post other pic :pok: :rofl: :rofl: :rofl: :rofl: :rofl:
Here you go Obi :tu:
As soon as I got back the missus had me
cutting a piece of chicken wire to protect a plant :ahhh :ahhh
-
I have just bought a LM Wave + :D :tu:
Congrats ! :tu:
Thanks Steve :cheers: :like: :like:
-
Nice one.. might see my old wave retire soon... if they get a black and silver version here...
-
I have just bought a LM Wave + :D :tu:
:multi: :ahhh :like: :pok: Action :rofl:
:rofl: :rofl: I haven’t even had the time yet
to test everything give me a chance :ahhh :ahhh
Dont make me post other pic :pok: :rofl: :rofl: :rofl: :rofl: :rofl:
Here you go Obi :tu:
As soon as I got back the missus had me
cutting a piece of chicken wire to protect a plant :ahhh :ahhh
:o :o :o :o :o :o
-
:2tu:
-
:pok: :cheers: :drink:
-
:cheers: :like: :like:
-
Just got this off Evil-Bay...
Excellent condition apart from saw has been replaced with another serrated blade! :think:
I've removed the extra blade because it didn't fit properly! Too thick and wide, tool didn't close correctly (just put a couple of washers in for now) ordered a saw blade off Loki Mobile.
It is also etched with a series of numbers! I wondered if anyone had any information on this?
Thanks.....
-
Looks like a NATO stock number. congrats on the CORE ! :cheers: :tu:
-
Nice one Jaypeebee :cheers:
looks interesting maybe you can
find info on the nato Core numbers :tu: :like:
-
Thanks Steve :tu:
It's a nice tool, just needed a good clean and loosen up, it will be perfect when I get a saw blade!
-
I'll have to look into it Speedy! :tu:
-
Well another addition bought yesterday .. wanted a special edition silver black beacuse of the looks.. thought about buying another rebar in BO to roll my own, but i then realized i had no big one yet... the surge black and silver came to the rescue (it was on sale too)
And a big thanks for my GF understanding my needs..
Here together with my Skeletool
(https://uploads.tapatalk-cdn.com/20180807/f8fb25b908771d17a916c48c3794467f.jpg)
Nice ! :cheers:
-
Looks like a NATO stock number. congrats on the CORE ! :cheers: :tu:
Yep, I'm pretty sure that is an NSN. Well done !
For some reason I have a vague idea that the last two digits might be the year - I have an "07" and an "08".
-
Looks like a NATO stock number. congrats on the CORE ! :cheers: :tu:
Yep, I'm pretty sure that is an NSN. Well done !
For some reason I have a vague idea that the last two digits might be the year - I have an "07" and an "08".
Correct Greg, it is 07
-
Finally picked up one of the PSTs I've been after for a while. I'll clean it up but its sure gorgeous as it to me.
-
Couple more. Thanks for looking.
-
Finally picked up one of the PSTs I've been after for a while. I'll clean it up but its sure gorgeous as it to me.
An early JPST, nice find :tu:
-
Great score Aloha ! :like: :tu:
-
Finally picked up one of the PSTs I've been after for a while. I'll clean it up but its sure gorgeous as it to me.
An early JPST, nice find :tu:
Yup. Thanks
-
Great score Aloha ! :like: :tu:
Thank you.
-
Well my latest LM is now ST300 but next week its gonna be Rebar(https://uploads.tapatalk-cdn.com/20180817/12f8a36a218bac3befdf6eb825285cfb.jpg)
Only Tools Matters
-
Nice ! :like: :tu:
-
Nice ! :like: :tu:
+1 :like: :like: :tu:
-
Liking all the new to you guys tools :o :like:
-
Picked this set up today.
-
Picked this set up today.
Nice find! :like:
-
Awesome pick-up. :like:
-
Good score Aloha ! :like: :tu:
-
Thanks all. It looks to be unused. Because its the older one it wont fit on the newer LMs but for those who like to carry the PST or Supertool it works great.
-
Excellent condition Aloha :tu: :like:
-
Bench grinder :whistle:
-
Bench grinder :whistle:
No you can’t do that :ahhh
-
I did! :ahhh
-
I did! :ahhh
Why :ahhh
-
Because I don't have any LM that fits the old style adapter...
So I grinded off all those poking things and now it fits every MT I own...
-
That makes sense I suppose :think: :tu:
-
Thats good to hear it can be modded. I think I'll keep this in its original condition. Might let it go down the road........
-
I'll just show it off here as well. :multi: My new Pulse, arrived yesterday. I "lost" my previous Pulse in warranty (got a Rebar), but I just couldn't live witout one. Very lightly used, functionally like new. Date code 1000.
-
Nice one Exeter :like: :tu:
-
Nice. The Pulse is really a great tool. Those rocker locks might be why many dont carry it. Its got quite a nice assortment of implements.
-
Got this today(https://uploads.tapatalk-cdn.com/20180820/324269f1525373fbc3c898f9fb3bb5aa.jpg)
Only Tools Matters
-
Excellent Antti :like: :tu:
More testing for you can’t wait :popcorn:
-
Got this today
Nice! :like:
Can't wait for more of your comparison testing!
-
Wave+ :ahhh
-
Congrats on that one ! Nice score, love the sheath !
Hopefully they wil sell those sheath separately too here in the Netherlands
-
Nice one italophil :cheers: :tu:
-
A new in box original Wave. I bought 7 retired leathermans, the last month, but they are all back in Denmark and I am in Australia, so I have to wait 5 month to see them.. :cry:
-
Now that’s just teasing Tgd :ahhh :tu:
-
Now that’s just teasing Tgd :ahhh :tu:
I just realised how easy it was buying Leatherman second hand, im taking a break now though. I got a Sideclip, two Supertools, a Core, fuse, blast, Org Wave and a PST. So accually 8.
-
Now that’s just teasing Tgd :ahhh :tu:
I just realised how easy it was buying Leatherman second hand, im taking a break now though. I got a Sideclip, two Supertools, a Core, fuse, blast, Org Wave and a PST. So accually 8.
Nice collection you have Tgd :like: :tu:
-
They are multiplying!!!! :ahhh
Nice set of tools Great Dane! :like:
-
A new in box original Wave. I bought 7 retired leathermans, the last month, but they are all back in Denmark and I am in Australia, so I have to wait 5 month to see them.. :cry:
If you really need to a "fix" of older Leatherman MTs you welcome to have a look at mine anytime you are in Canberra :pok: ;)
-
Aw the virus stroke again... after seeing the price rise significantly on leathermans the last months , probably due to the import tax that was an answer on Trumps import tax, i snagged me a still relatively cheap Coyote OHT on amazon.de.
(https://uploads.tapatalk-cdn.com/20180823/da81b986513aa827444924909cf011e3.jpg)
-
That looks very nice LanWolf :like: :tu:
-
Congrats on that one ! Nice score, love the sheath !
Hopefully they wil sell those sheath separately too here in the Netherlands
Though that sheath is made in US, it is cheaply made. It is nowhere near the quality or style of the lovely original Wave sheath.
-
Congrats Lanwolf! :like:
-
Thanks Guys, loving it ! Its smooth, like the spring loaded pliers a lot too.
Chrono,
Sadly the first original wave steath does not fit the current generation, so for the looks we have to do with whats available now.
Altough i have a new skinth mondo on the way, still like leather sheaths.
-
My new 27 oz stainless steel Leatherman :)
(https://content-5.foto.my.mail.ru/mail/wowaboro/264/b-642.JPG) (https://content-5.foto.my.mail.ru/mail/wowaboro/264/b-642.JPG)
-
Found a Rev at WM on clearance for $7 :o
-
If you can find one at that price it's a no brainer, but I wouldn't recommend it at the full retail cost. Has good pliers and outside/locking main blade and a pocket clip. there are a few hot spots on the handles though and a couple are pretty sharp, especially near the main blade pivot/spine side,
-
This one!
Just in time for the 30 days of Waves challenge!! :tu:
-
Very nice Jaypeebee :dd: :like:
-
Found a Rev at WM on clearance for $7 :o
a Rev?? Only one? :ahhh
At that price I'd have bought all of them in the store :pok: :D
-
Found a Rev at WM on clearance for $7 :o
a Rev?? Only one? :ahhh
At that price I'd have bought all of them in the store :pok: :D
I did :rofl: that was the last one in the store, will have to check another location
-
checked a few more wally worlds, none had the clearance knives on display anymore, used that brickseek.com but wasnt accurate or the store employees moved them out of sight when they remodeled knife display case inventory, I read that this was done nationally but who knows. So I went back to the store closest to me and a nice lady who works there showed me some of the other clearance stuff was on top shelf of case and pushed to the rear. there was a wave for $21, Gerber MP450 for $9, Suspenion $7, an awesome fixed blade buck Mesa $11 and a few other nice deals. I'm not advocating rushing to the store as it seems like its hit or miss but if you're near one take a look.
-
Latest LM is a Charge+ with brown leather sheath. Drawer queen. :facepalm:
I did remove the blister pack though. :)
Will post a better photo at some point.
-
Nice one GLBM :like: :tu:
-
checked a few more wally worlds, none had the clearance knives on display anymore, used that brickseek.com but wasnt accurate or the store employees moved them out of sight when they remodeled knife display case inventory, I read that this was done nationally but who knows. So I went back to the store closest to me and a nice lady who works there showed me some of the other clearance stuff was on top shelf of case and pushed to the rear. there was a wave for $21, Gerber MP450 for $9, Suspenion $7, an awesome fixed blade buck Mesa $11 and a few other nice deals. I'm not advocating rushing to the store as it seems like its hit or miss but if you're near one take a look.
I assume you got them all! :pok: :o
Latest LM is a Charge+ with brown leather sheath. Drawer queen. :facepalm:
I did remove the blister pack though. :)
Will post a better photo at some point.
MMM... :drool:
it was about time for an upgrade! :like:
-
Nice one GLBM :like: :tu:
Thank you, W! :cheers:
MMM... :drool:
it was about time for an upgrade! :like:
Thank ya, TP! :cheers:
It was $8 cheaper than buying another Wave+. Couldn't pass that up. :ahhh
-
Yes, I got them peacent, haven't seen crazy prices like that for 10 years when they were clearance LM surges for $25. had sold my mp400 and suspension many years ago when I lost my job, so was happy to get a chance at owning again. a few I didn't grab, some gerber and sog folders that were meh and had 5cr steel but I might take another look
-
Just bought a Skeletool CX . Not totally sure of it’s role’ as yet , will probably get paired with a SAK , like a Huntsman .
Best Regards,
Chris
-
Just bought a Skeletool CX . Not totally sure of it’s role’ as yet , will probably get paired with a SAK , like a Huntsman .
Best Regards,
Chris
Nice. I like to pair mine with a SAK with scissors for sure. A Huntsmans sounds like a nice pairing. I enjoy my CX quite a lot hope you feel the same about yours. :tu:
-
So far , so good !
Best Regards,
Chris
-
Just boughted Leatherman SuperTool BO Cap Crimper, hopefully tool is gonna be here end of this week. I should prolly try to sell soon my extra tools away.
Only Tools Matters
-
Congrats! :tu:
-
Congrats! :tu:
Thanks, it was so outrageous cheap that i just had to buy it. 25€ including post isnt bad price, its not new but bit cleaning here and there and it looks nice(https://uploads.tapatalk-cdn.com/20180918/0a69750eebf019cf6eb3142100fde8b0.jpg)
Only Tools Matters
-
Nice one Antti looks in good condition :like: :tu:
-
Yea it shows just seems to be bit dirty
Only tools matters
-
It should look much better after a clean :tu: :like:
-
My SuperTool BO cap crimper is my newest LM
(https://farm2.staticflickr.com/1965/43975416075_5438c39ebf_b.jpg) (https://flic.kr/p/29ZXv7T)
Only Tools Matters
-
Nice one Antti :like: :tu:
-
My SuperTool BO cap crimper is my newest LM
(https://farm2.staticflickr.com/1965/43975416075_5438c39ebf_b.jpg) (https://flic.kr/p/29ZXv7T)
Only Tools Matters
Sweet ! :like: :tu:
-
I just ordered this Surge
Should be with me this week sometime :mail:
-
:like:
Sent fra min FRD-L09 via Tapatalk
-
Thanks RF52 :cheers: :like:
-
Nice Surge W ! :cheers: :tu:
-
Thanks Steve :cheers: :like:
-
That looks just awesome.
Only Tools Matters
-
Thanks Antti :cheers: :like:
-
That's Leatherman's stock Black & Silver Surge photo but I'm sure yours will look just as good. ;)
https://www.leatherman.com/black-silver-surge-567.html?dwvar_567_color=139&cgid=heavy-duty-multi-tools#start=1
-
Congrats Speed! Awesome choice. :like: :tu:
-
Thanks Syncop8r and Glockfan :cheers:
I just used a pic of google :D
-
I can't wait to see actual pics. :dd:
-
I can't wait to see actual pics. :dd:
:iagree:
-
:iagree: neither can I :ahhh
-
Just got this delivered :mail:
My new Surge :woohoo:
-
Crater from Canada :multi:
(https://i.imgur.com/b2rp6D7.jpg)
(https://i.imgur.com/Sh0O88a.jpg)
-
Finally got a Wave for under $30. By the looks of the wire cutter, main and serrated blades, it should be in very good shape :drool:
-
Nice score and in BO no less ! :like: :tu:
-
Very nice especially for the price :like:
Nice one chrono :tu:
-
I got this of fleabay :tu:
Ok it’s only a pin badge
but it is of a Leatherman multi tool :D
-
:like: :tu:
-
I got this of fleabay :tu:
Ok it’s only a pin badge
but it is of a Leatherman multi tool :D
did you pay the price of a PST for it? :pok: :D
(https://i.imgur.com/QYEF8bH.jpg)
-
I paid €13 £11.40 :tu:
Including postage
-
W,
You make Tim proud. :like:
-
Thanks GLBM :cheers: :like:
-
Bought this LM Supertool 300 on fleabay today :woohoo:
It’s brand new and It only cost me £53.95 inc p&p :D
-
Nice score ! :like: :tu:
-
Thanks :cheers: :like:
-
Nice score ! :like: :tu:
:iagree: :like:
:nanadance: :nanadance:
-
Thanks Poncho :cheers: :like:
-
Bought this LM Supertool 300 on fleabay today :woohoo:
It’s brand new and It only cost me £53.95 inc p&p :D
Congrats,cheers
Sent from my SM-G960F using Tapatalk
-
Thanks marko :cheers: :like:
-
I’m on the fence folks...
I have been pondering a Wave/Charge+.
.... To be continued. :popcorn:
-
Sounds interesting :popcorn:
-
I found a guy on Ebay selling new BO Charge +'s for a great price. Should have it in my hands tomorrow :mail:
He has a bunch so once received I'll post his info in the Deal section. :tu:
(https://i.ebayimg.com/images/g/Em8AAOSwAPtb3emI/s-l1600.jpg)
-
I found a guy on Ebay selling new BO Charge +'s for a great price. Should have it in my hands tomorrow :mail:
He has a bunch so once received I'll post his info in the Deal section. :tu:
(https://i.ebayimg.com/images/g/Em8AAOSwAPtb3emI/s-l1600.jpg)
Cool
Sent from my SM-G960F using Tapatalk
-
Nice one Steve :like: :tu:
-
Black Widow!! :ahhh
(https://i.imgur.com/1Dr5nZH.jpg)
-
Very nice TP :like: :tu:
-
Very nice TP :like: :tu:
this One Handed Tool
and your new supertool
in black finish to be cool 8)
or shiny steel to drool ;)
-
:rofl: :rofl: good one TP :rofl: :rofl: :like:
-
Dammmmmmmmnnnnnnn that's cool nickname,awesome tool.
Sent from my SM-G960F using Tapatalk
-
Dammmmmmmmnnnnnnn that's cool nickname,awesome tool.
Sent from my SM-G960F using Tapatalk
thanks Marko, this folder and the (admittedly puny :facepalm:) sharp OHT blade opened the box containing a new "Widow" for the home, the so called "Alexa" talking AI platform from Amazon :ahhh Two Widows in one day, that's too much for a single man like me :dunno: :D
(https://i.imgur.com/6z70vmU.jpg?1)
-
My new Supertool 300 has just been delivered :mail:
-
:like: :cheers: :tu:
-
Thanks Steve :cheers: :like:
-
:like: :cheers: :tu:
ain't you got something cool in the mail too?? :pok: :D
-
Being a gun nut I have always wanted one of these. Thanks to my friend Louis for the great gift.
-
:like: :cheers: :tu:
ain't you got something cool in the mail too?? :pok: :D
yes I did :tu:
(https://i.imgur.com/NK50Inbh.jpg)
-
:like: :cheers: :tu:
ain't you got something cool in the mail too?? :pok: :D
yes I did :tu:
(https://i.imgur.com/NK50Inbh.jpg)
Very nice Steve !
-
Very nice EZrider and Steve :like: :tu:
-
Very nice EZrider and Steve :like: :tu:
Thanks :cheers:
It’s always been to expensive as I would never carry it but as a gift? Awesome :woohoo:
-
Very nice EZrider and Steve :like: :tu:
Thanks :cheers:
It’s always been to expensive as I would never carry it but as a gift? Awesome :woohoo:
Definitely a Awesome gift :cheers: :like:
-
Nice little Squirt E4 with a twist......wonder if it ever got used at work???
-
Nice one Boonies :like: :tu:
-
Being a gun nut I have always wanted one of these. Thanks to my friend Louis for the great gift.
More photos like this one,awesome, cheers.
Sent from my SM-G960F using Tapatalk
-
Great pick ups guys. :like: Enjoy!
-
I got a Charge + from Steve's pointer, and this beauty of a Skele today >:D
-
Very nice chrono :like: :tu:
-
:iagree: :like: :tu:
-
I got a Charge + from Steve's pointer, and this beauty of a Skele today >:D
Congrats, cheers.
Sent from my SM-G960F using Tapatalk
-
Thanks, Gents! I have been drooling for a Damasteel Skele for a while, but cannot bring myself to spend $140 for a pretty blade. This one is in very good condition, though the Damascus pattern was scratched off a bit. Still a very good price :D
-
I finally pulled-the-trigger on a Wave Plus. Got a great-deal on a 'Black Friday' sale for $75.00.
(https://shop.hamiltonmarine.com/inet/storefront/getimage.php?recid=157443)
-
:like: :tu:
-
Some very great deals and awesome LM received peeps :like: :like:
-
Nice one eTripper :like: :tu:
-
Stumbles upon this little guy needed a home. Dated 04/99 05/99.
-
Nice it came with the box and the pouch Aloha :tu: :like:
-
Plastic presentation box is nice. Guess the company ordered up a few and gave them out.
-
Probably to clients :tu:
-
Yeah that too. I would have liked to work for a company who gave out MTs.
-
You and me both :tu: :like:
-
Really :like: that Micra, Aloha :like:
-
Just got the New Surge plus bit set in the post and a free sharpening stone and oil.
Very pretty and silver.
-
Just got the New Surge plus bit set in the post and a free sharpening stone and oil.
Very pretty and silver.
Post up some pics when you get a chance. The Surge is an all time favorite of mine and many here. Congrats.
-
Nice one MMW love to see some pics :like: :popcorn:
-
Stumbles upon this little guy needed a home. Dated 04/99 05/99.
Very nice ! :like: :tu:
-
Grabbed a kydex sheath for my new Wave Plus
(https://i.imgur.com/KAr1sePl.jpg?1)
-
Nice one MMW love to see some pics :like: :popcorn:
:iagree: :like:
-
Great pic and some cool gear, eTrip :like:
-
Grabbed a kydex sheath for my new Wave Plus
Great selection of tools eTripper :tu: :like:
-
Thanks, Wspeed! Nice to get the 'high-sign' from the forum cognoscenti. Cheers!!
-
Thanks to Kev D and his excellent GAW :cheers:
This gorgeous LM OHT in black and silver :dd: :like:
Thanks again Kev :cheers:
-
Well done Wispy lucky you :cheers:
-
Stumbles upon this little guy needed a home. Dated 04/99 05/99.
Lovely little Micra that. They're Great !
-
Well done Wispy lucky you :cheers:
Thanks FB :cheers: :like:
-
Just saw this and went to congratulate you in the other thread :cheers:
Congrats on the OHT, Ws and great GAW by Kev :like: :like:
-
Thanks Poncho :cheers: :like:
-
Nicely done W ! I guess I missed that the GAW was over ...congrats !!! :like:
-
Thanks Steve :cheers: :like:
-
I bought these from Lovecraft a few weeks ago, first picture of them all together :tu:
(https://i.imgur.com/qtUg3UZ.jpg)
-
Some very lovely purchases Sparky :o :dd: :like:
-
Very nice Sparky :tu: :like:
-
They look mint. :dd:
-
:like: those Sparky
Sent fra min FRD-L09 via Tapatalk
-
Thanks :tu:
Lovecraft is a good Guy to deal with :salute:
:cheers:
-
They look mint. :dd:
+1
Do you have a couple more of each, so you can use them?...
:pok: :pok:
-
Thanks :tu:
Lovecraft is a good Guy to deal with :salute:
:cheers:
I like his writing, too...
8) 8)
-
They look mint. :dd:
+1
Do you have a couple more of each, so you can use them?...
:pok: :pok:
Maybe :whistle:
-
Nice score Tony ! :like: :cheers: :tu:
-
Just got this delivered :mail:
The OHT and a MTO badge from Kev D :woohoo:
Thanks again Kev for the excellent GAW :cheers:
-
Just got this delivered :mail:
The OHT and a MTO badge from Kev D :woohoo:
Thanks again Kev for the excellent GAW :cheers:
aw yissss :like:
-
Thanks TP :cheers: :like:
-
Just got this delivered :mail:
The OHT and a MTO badge from Kev D :woohoo:
Thanks again Kev for the excellent GAW :cheers:
:like: Nice!
Sent fra min FRD-L09 via Tapatalk
-
Thanks RF52 :cheers: :like:
-
Very nice speedy ! :cheers:
-
Thanks Steve :cheers: :like:
I like the way the pliers come out off the handles :tu:
-
Another pic of the gorgeous OHT :dd: :like:
-
Congrats Ws :like: and big thanks to Kev D for the GAW :tu: :like:
-
Thanks Poncho :cheers: :like:
-
Thanks :tu:
Lovecraft is a good Guy to deal with :salute:
:cheers:
Cheers mate :cheers:
-
Since becoming a member....2-3 DAYS AGO on this forum I've acquired the following:
LM SQUIRT PS4
LM WAKE "IN PIECES"
LM CHARGE TTI
LM CRUNCH
LM MUT
OLDER LM WAVE
Once I noticed all the awesome mods and interchangeable items I went a little overboard.
-
:mail:
Yesterday I finally became the owner of a BO Charge+ which I bought in a great deal discovered and shared by SteveC last November. Forwarding took a while becuse of circumstances out of my control, but it's here at last. And I like it! :multi:
I also purchased a regular snap sheat in anticipaion of the Charge because by default it comes with the tactical molle one without the elastic slots on the sides. I also have a BO bit extender on the way, this will be a proper user MT, a user kit.
-
Nice one Exeter :tu: :like:
-
Nice one Exeter :tu: :like:
+1
It sure took its time before it got to you, but it's well worth the wait isn't it ?
Every time I put my BO charge + on my belt it puts a smile on my face :D.
-
Here are some pics of my latest Leatherman:
(https://i.imgur.com/8c7dZXq.jpg)
(https://i.imgur.com/8SWG6Qj.jpg)
(https://i.imgur.com/CQOWMqh.jpg)
And I got some back-ups as well ;).
(https://i.imgur.com/M7oQbfI.jpg)
-
Very nice TG :tu: :like:
-
Very nice TG :tu: :like:
Thanks mate :salute:.
Got them at -70% discount, else I wouldn't have 3 of them (probably not even 1, at full retail ::)).
-
Very nice TG :tu: :like:
Thanks mate :salute:.
Got them at -70% discount, else I wouldn't have 3 of them (probably not even 1, at full retail ::)).
That’s a excellent deal I was wondering why you had 3 of them :tu: :like:
-
A Juice CS4, Kick and Squirt S4...
(https://uploads.tapatalk-cdn.com/20190227/0bdd2662ea620fc3da0b0cc44cc2938f.jpg)
(https://uploads.tapatalk-cdn.com/20190227/d20dbc1b5ca3c4b0ed5a0c9bf269c1c5.jpg)
I’ll take a pic of the Kick tomorrow...
-
Nice collection jaya :like: :tu:
-
Thanks Wim... The CS4 was an impulse bid... really wanted the older S2... :cheers:
-
How are you liking the CS4 jaya :tu: :like:
-
A Juice CS4, Kick and Squirt S4...
(https://uploads.tapatalk-cdn.com/20190227/0bdd2662ea620fc3da0b0cc44cc2938f.jpg)
(https://uploads.tapatalk-cdn.com/20190227/d20dbc1b5ca3c4b0ed5a0c9bf269c1c5.jpg)
I’ll take a pic of the Kick tomorrow...
I guess it's safe to assume you like the colour RED... :rofl:
And yeah, nice collection with all of them in the same colour. :tu:
-
:rofl:
Got those in a local auction... separately... Was just a coincidence that they were all blue :cheers:
-
Here’s something which isn’t blue... The Kick arrived a few days ago...(https://uploads.tapatalk-cdn.com/20190301/b5f44b3ed06ef12eed77624ba5a644bf.jpg)
-
They look very similar :like: :tu:
-
Nah, the fuse probably...
-
Have you got the Fuse jaya :think: :tu:
-
Some really great tools fellas. I like the looks of that KF4 jaya :tu:
-
I bought this LM pin badge today for the inside of the lid on my storage box :tu:
(https://i.imgur.com/YwCv0clh.jpg)
-
My (Late) Wife bought me a Leatherman MUT in December 2018, it was coming from the UK and going to Perth, Western Australia. It arrived the day after she passed on the 24th Jan 2019.
I got it engraved that weekend.
(https://uploads.tapatalk-cdn.com/20190310/d6668e2f802d7e3576d63a9216fe3584.jpg)
Sent from my iPhone using Tapatalk
-
Sorry to hear your wife past away PPCA :(
Nice idea with engraving the LM MUT
Great way to remember your wife :tu:
-
Sorry to hear your wife past away PPCA :(
Nice idea with engraving the LM MUT
Great way to remember your wife :tu:
Thanks mate... been carrying it every day since I got it.
Sent from my iPhone using Tapatalk
-
Sorry to hear your wife past away PPCA :(
Nice idea with engraving the LM MUT
Great way to remember your wife :tu:
I agree it is a great idea for remembering her :salute: also sorry for your loss :-\ :salute:
-
I sent back a Blast due to a broken lock pin. Leatherman sent me a Wave to replace it. Thank You Leatherman :multi: :salute: :mail:
-
Nice one :like: :tu:
-
Sorry you hear about a broken Blast :-\ but glad they replaced it with a Wave at least :salute: :tu:
-
Sorry to hear your wife past away PPCA :(
Nice idea with engraving the LM MUT
Great way to remember your wife :tu:
+1
-
Some nice acquisitions fellas ! :like: :tu:
-
Sorry you hear about a broken Blast :-\ but glad they replaced it with a Wave at least :salute: :tu:
Thanks! I used my Blast a lot so I guess it just wore out :dunno:
-
@ PPCA, :( my condolences. The engraved MUT is a nice way to remember her.
-
@ PPCA, :( my condolences. The engraved MUT is a nice way to remember her.
Thanks mate
Sent from my iPhone using Tapatalk
-
To answer Wim’s question... Yes... The Fuse arrived today... :cheers:
Here’s a grp pic of the Zytel brothers...just missing the core :facepalm: (https://uploads.tapatalk-cdn.com/20190316/414a0c4635154ab1791424561fbcdd8a.jpg)
-
Nice one jaya :tu: :like:
-
Still rockin' the Wave Plus for EDC.
(https://i.imgur.com/Me8TVIZl.jpg)
(https://i.imgur.com/AM2vlEkl.jpg)
(https://i.imgur.com/BqN9i5El.jpg?1)
-
Nice sheath/holster :like:
Where did you find that?
Sent fra min FRD-L09 via Tapatalk
-
Nice pics of the Wave eTripper :like: :tu:
-
Thanks. I purchased the kydex sheath from a local vendor. He custom-makes these for all-models in the Leatherman line-up. Your choice of camo, or basket-weave.
-
Looks very nice and handy :like:
Sent fra min FRD-L09 via Tapatalk
-
Just got a PST II...
(https://uploads.tapatalk-cdn.com/20190322/97930c8975f45c1e545647cac905d45f.jpg)
-
Lots of great stuff gotten, guys :like:
-
Nice early PST II :like: :tu:
-
:cheers: :hatsoff:
Sent from my iPhone using Tapatalk
-
Just got a PST II...
(https://uploads.tapatalk-cdn.com/20190322/97930c8975f45c1e545647cac905d45f.jpg)
Love the PST II. Nice buy! :like:
-
The Juice Pro has landed.
(https://i.imgur.com/Z63kziz.jpg)
(https://i.imgur.com/G9xI4iK.jpg)
(https://i.imgur.com/yikUn52.jpg)
(https://i.imgur.com/qLHkj2p.jpg)
(https://i.imgur.com/eatr3mD.jpg)
(https://i.imgur.com/OJxND47.jpg)
With the XE6.
(https://i.imgur.com/m0w6hpN.jpg)
-
The Juice Pro has landed.
Great snaps, GLBM! The Juice Pro rocks!! :like:
-
Thanks, eTrip! :cheers:
You ain't joking. The Pro has a serious selection of tools. May be one I need to find a beater condition one to carry. :iagree:
The tiny serrated blade and tweezers were two tools I didn't realize the Pro had that the XE6 didn't. Very cool. :)
-
The foil cutter is the one I remembered :cheers: but I forgot that the Xe6 didn't have tweezers :cheers:
Excellent pics of the Pro, glbm :like: Glad you got one :tu:
-
The tiny serrated blade and tweezers were two tools I didn't realize the Pro had that the XE6 didn't. Very cool. :)
;)
(https://content-17.foto.my.mail.ru/mail/wowaboro/259/b-198.JPG) (https://content-17.foto.my.mail.ru/mail/wowaboro/259/b-198.JPG)
-
;)
(https://content-17.foto.my.mail.ru/mail/wowaboro/259/b-198.JPG) (https://content-17.foto.my.mail.ru/mail/wowaboro/259/b-198.JPG)
Factory error ? (Juice Pro that managed to sneak out of the LM factory dressed in XE6 scales)
-
The Juice Pro has landed.
(https://i.imgur.com/Z63kziz.jpg)
(https://i.imgur.com/G9xI4iK.jpg)
(https://i.imgur.com/yikUn52.jpg)
(https://i.imgur.com/qLHkj2p.jpg)
(https://i.imgur.com/eatr3mD.jpg)
(https://i.imgur.com/OJxND47.jpg)
With the XE6.
(https://i.imgur.com/m0w6hpN.jpg)
In excellent condition and in nice storm grey! Now that's something to envy! :tu:
-
The foil cutter is the one I remembered :cheers: but I forgot that the Xe6 didn't have tweezers :cheers:
Excellent pics of the Pro, glbm :like: Glad you got one :tu:
Thank you, Poncho! :cheers:
Indeed. Saw the prices creeping up and thought it may be the right time to get in on a Pro. :ahhh
;)
(https://content-17.foto.my.mail.ru/mail/wowaboro/259/b-198.JPG) (https://content-17.foto.my.mail.ru/mail/wowaboro/259/b-198.JPG)
:dd:
Factory error ? (Juice Pro that managed to sneak out of the LM factory dressed in XE6 scales)
That is cool for sure. Maybe after the Pro was discontinued, they used the chasis and tools with XE6 scales to use up the parts? :think:
I'm quite Juice naive, so that is speculation on my part.
In excellent condition and in nice storm grey! Now that's something to envy! :tu:
Thank you, Exeter! :cheers:
Indeed, the storm grey looks awesome. Don't know why LM went with half color/half polished on the later Juices. :ahhh
-
Factory error ? (Juice Pro that managed to sneak out of the LM factory dressed in XE6 scales)
Yes, exactly :)
LM factory error, one of many.
-
The Juice Pro has landed.
Nice one GLBM is it for your collection or is it going to be a user :like: :tu:
-
Yes, exactly :)
LM factory error, one of many.
Awesome. Thank you for sharing that one and the info. Your Juice collection is so juicy. :drool:
Nice one GLBM is it for your collection or is it going to be a user :like: :tu:
Thank you, W! :cheers:
Since I paid close to $100, it'll be a collection tool. :ahhh
-
Nice one GLBM :like: :tu:
-
Cool about the factory error, wow :o :like:
and I don't blame you for keeping it as a shelf queen for $100, glbm :ahhh :ahhh :ahhh :D
-
Another PST...(https://uploads.tapatalk-cdn.com/20190331/ea24ac3f894b0cf622dafdbf1d78f289.jpg)
-
:like: :tu:
-
:hatsoff:
-
Nice one jaya :like: :tu:
-
:cheers: Wim
-
Nice one GLBM :like: :tu:
Thank you, W! :cheers:
Cool about the factory error, wow :o :like:
and I don't blame you for keeping it as a shelf queen for $100, glbm :ahhh :ahhh :ahhh :D
Thank you, Poncho! :cheers:
-
:hatsoff:
-
Nice one jaya :like: :tu:
:iagree: :like:
-
Crater C33x
-
With picture, this time
-
Nice LM knife Raoul :like: :tu:
-
Thanks :salute:
-
Nice one Raoul :like:
-
The Juice SX Surf Tool finally arrived. :woohoo:
(http://imgur.com/3YgWQwX.jpg)
(http://imgur.com/QxlZxZj.jpg)
(http://imgur.com/1cHHLE1.jpg)
-
Very cool, glbm :like: Glad that you got one of those :cheers: :tu:
-
Will look good in your collection GLBM :dd: :like: :like:
-
Nice pick-up :tu:
-
Boughted Leatherman Wingman to myself, my wife has one and i thinked i also need it to my collection.
(https://uploads.tapatalk-cdn.com/20190410/62c54ab0315fee3736ba783ffb3419be.jpg)
Only Tools Matters
-
Nice one Antti :like: :tu:
-
Very cool, glbm :like: Glad that you got one of those :cheers: :tu:
Thank you for the kind words and help with deciding on the SX, Poncho! :cheers:
Will look good in your collection GLBM :dd: :like: :like:
Thank you for the kind words, W! :cheers:
It is actually a really nice tool. I had never owned one of the normal sized Juice models before. I think I can see why many members like them. :)
Nice pick-up :tu:
Thank you for the kind words, Glockfan! :cheers:
Boughted Leatherman Wingman to myself, my wife has one and i thinked i also need it to my collection.
(https://uploads.tapatalk-cdn.com/20190410/62c54ab0315fee3736ba783ffb3419be.jpg)
Only Tools Matters
Nice one, Antti! :like:
-
Boughted Leatherman Wingman to myself, my wife has one and i thinked i also need it to my collection.
(https://uploads.tapatalk-cdn.com/20190410/62c54ab0315fee3736ba783ffb3419be.jpg)
Only Tools Matters
Nice Antti !
-
I picked up a Flair in pretty rough shape. Its sitting in some degreaser at the moment. I hope it looks better and can be cleaned up of all the grime and what looked to be sharpie on it. I'll report back once I scrub it later today. They poor tool was in bad shape and I just couldn't pass it up.
-
Hopefully it will look much better after you cleaned it Aloha :like: :tu:
-
I picked up a Flair in pretty rough shape. Its sitting in some degreaser at the moment. I hope it looks better and can be cleaned up of all the grime and what looked to be sharpie on it. I'll report back once I scrub it later today. They poor tool was in bad shape and I just couldn't pass it up.
Good luck with the Flair! :tu:
I'm a sucker for a basket-case tool as well. :facepalm:
-
A Flair, an interesting tool for sure, I actually got one with a SAK lot today as a complete surprise, I assumed from the poor picture that having food blades it was a knock-off, and I'm mainly a SAK collector anyway.
Looks to be in good shape, date stamp 1099.
(https://i.imgur.com/y9KJ84h.jpg)
(https://i.imgur.com/B9YFCyT.jpg)
(https://i.imgur.com/kkv8Ewa.jpg)
(https://i.imgur.com/hDuwIrz.jpg)
Hope yours turns out well Aloha.
-
Wow that flare looks pristine! :climber: :woohoo: :drool:
-
Looks good Gath :like: :tu:
-
Nice one, Gath! :like:
-
So I got a BO surge...a little beat around the edges..but I kind of like its look.
Going to be modding it quite soon to something else though.
https://www.instagram.com/p/BwF11EGgh1e/?utm_source=ig_web_button_share_sheet
https://www.instagram.com/p/BwF16AGAX3i/?utm_source=ig_web_button_share_sheet
https://www.instagram.com/p/BwF19StgfA1/?utm_source=ig_web_button_share_sheet
Cheers,
H.G.
-
So I got a BO surge...a little beat around the edges..but I kind of like its look.
Going to be modding it quite soon to something else though.
https://www.instagram.com/p/BwF11EGgh1e/?utm_source=ig_web_button_share_sheet
https://www.instagram.com/p/BwF16AGAX3i/?utm_source=ig_web_button_share_sheet
https://www.instagram.com/p/BwF19StgfA1/?utm_source=ig_web_button_share_sheet
Cheers,
H.G.
Congrats, H.G.! :like:
Surge is a true beast of a tool. Probably my favorite working man's tool. :)
-
Leatherman Limited Edition PST.
This thing has the best fit & finish of any LM PST I've ever held. Should be for $150. :rofl:
I normally avoid 'Limited Edition' tools like the plague, but am happy to have this historical Limited Edition from Leatherman.
(http://i.imgur.com/ECfxZ6R.jpg)
(http://i.imgur.com/M3TiCrW.jpg)
(http://i.imgur.com/xs6Gg42.jpg)
(http://i.imgur.com/jI15c6P.jpg)
(http://i.imgur.com/mZ2xo4c.jpg)
(http://i.imgur.com/u2yaORA.jpg)
-
Awesome LMs received guys :dd: Some very nice tools :like:
-
Leatherman Limited Edition PST.
This thing has the best fit & finish of any LM PST I've ever held. Should be for $150. :rofl:
I normally avoid 'Limited Edition' tools like the plague, but am happy to have this historical Limited Edition from Leatherman.
(http://i.imgur.com/ECfxZ6R.jpg)
(http://i.imgur.com/M3TiCrW.jpg)
(http://i.imgur.com/xs6Gg42.jpg)
(http://i.imgur.com/jI15c6P.jpg)
(http://i.imgur.com/mZ2xo4c.jpg)
(http://i.imgur.com/u2yaORA.jpg)
No doubt a good looking MT (and no doubt expensive). Congrats with it gerleatherberman
Sent from my iPhone using Tapatalk
-
:iagree: very cool 8) :like:
-
Awesome LMs received guys :dd: Some very nice tools :like:
Thanks, Poncho! :cheers:
No doubt a good looking MT (and no doubt expensive). Congrats with it gerleatherberman
Sent from my iPhone using Tapatalk
Thank you much, MMR! :cheers:
Indeed, I had some reservations about the Limited PST price, but unlike LM pumping out 5 different colors of the same tool(ex. Signal), the LE PST does seem to be a unique tool in the current line-up. And the fit & finish are quite outstanding, along with being the first MT in ages that LM actually put the country of manufacture onto. Plus Tim's signature stamped in is neat. Now I just need Tim's real signature engraved on the one blank handle side. :ahhh :)
:iagree: very cool 8) :like:
Thank you, Speedy! :cheers:
-
https://www.instagram.com/p/BwIRMzvgrrE/?utm_source=ig_web_button_share_sheet
just got my Mini....what was I thinking...this is the most incredible multi-tool I have so far.
Absolutely my favorite tool ever.
-
Nice one, H.G.! :like:
Definitely one of the coolest tools ever made. :)
-
Have this on the way :multi:
(https://i.ebayimg.com/images/g/ndIAAOSwgnhcnBiL/s-l1600.jpg)
-
Have this on the way :multi:
(https://i.ebayimg.com/images/g/ndIAAOSwgnhcnBiL/s-l1600.jpg)
:like: very much!
-
Nice one Steve :like: :tu:
-
Have this on the way :multi:
(https://i.ebayimg.com/images/g/ndIAAOSwgnhcnBiL/s-l1600.jpg)
Nice Steve....... Love the Sideclip...... :tu:
-
Have this on the way :multi:
(https://i.ebayimg.com/images/g/ndIAAOSwgnhcnBiL/s-l1600.jpg)
Sweeeeeeet!!! :ahhh :like: Nice one cuz! :cheers:
-
Lots of great tools everyone. :like:
-
Nice :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh HG :like:
And excellent shiny SideClip, Steve 8) :like:
-
Nice :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh HG :like:
And excellent shiny SideClip, Steve 8) :like:
Hopefully a shiny one, the pics are kind of crappy but it sure looks like the shiny variety :ahhh
-
https://www.instagram.com/p/BwK28M8AdLN/?utm_source=ig_share_sheet&igshid=fltdg5oqmxo8
Beautiful new toy 😍
-
https://www.instagram.com/p/BwK28M8AdLN/?utm_source=ig_share_sheet&igshid=fltdg5oqmxo8
Beautiful new toy 😍
:like:
-
Hopefully a shiny one, the pics are kind of crappy but it sure looks like the shiny variety :ahhh
The matte ones had the old style plier head and the shiny ones had the newer style plier head :tu:
-
Love that ST300 EOD :drool: :like:
-
It's here :mail:
-
:popcorn:
-
:mail: :mail:
:woohoo: :woohoo:
:climber: :climber:
https://www.instagram.com/p/BwSboWfgPTH/?utm_source=ig_share_sheet&igshid=1g7wpa71ex603
Now the modding begins..
-
Nice one HG :like: :tu:
-
My Wave Plus is the perfect-compromise between weight, and functionality for my purposes. So, if and when I decide to shell-out for a new Leatherman it will be the 'black-version' of this model. I'm really into 'multis' but knives, always 'win-out' in the 'priority-section' for some reason. :drool: 8)
(https://i.imgur.com/L9eBN9Pl.jpg)
-
Congrats Steve and HG :cheers: :like:
-
Also, eTrip, since you already have a Wave+ you might want to get a Charge+ in BO 8) They are a very excellent MT :like:
-
Great pic eTripper :like: :tu:
-
My Wave Plus is the perfect-compromise between weight, and functionality for my purposes. So, if and when I decide to shell-out for a new Leatherman it will be the 'black-version' of this model. I'm really into 'multis' but knives, always 'win-out' in the 'priority-section' for some reason. :drool: 8)
(https://i.imgur.com/L9eBN9Pl.jpg)
Very nice! While the SS is nice looking, the BO version is quite the looker as well. :)
-
(https://i.imgur.com/jOogX7Ch.jpg)
-
Nice one Steve :like: :tu:
-
Got these 4 guys in the mail. $65 shipped. (https://uploads.tapatalk-cdn.com/20190418/af0c78d50bd0c3cee94688f9f13d60ff.jpg)
Sent fra min ANE-LX1 via Tapatalk
-
Nice :like:
Sent fra min FRD-L09 via Tapatalk
-
Got these 4 guys in the mail. $65 shipped.
Sent fra min ANE-LX1 via Tapatalk
$65 shipped?...That price makes each tool $16.25 :o...Heck of a good deal!! :tu:
-
Not just a great price but assuming each is in good working order, that's half a weeks rotation!
:like:
-
Very good price nice one covi :like: :tu:
-
That is a steal of a deal :cheers:
-
Great pic, Steve 8) :like: and that is an awesome deal, covi :ahhh :ahhh :ahhh :o :like:
-
:iagree: with the above. That is a hell of a deal, covi! The Wave alone was worth the lot. :woohoo:
-
Got this yesterday (https://uploads.tapatalk-cdn.com/20190419/9cfb50b9704ddb20b5f5e5405e71bc26.jpg) gonna test this today little
Only Tools Matters
-
Got this yesterday (https://uploads.tapatalk-cdn.com/20190419/9cfb50b9704ddb20b5f5e5405e71bc26.jpg) gonna test this today little
Only Tools Matters
Nice one, Antti! :like:
Combo blade or older plain edge?
-
Nice Skeletool Antti :like: :tu:
-
Nice Skeletool Antti :like: :tu:
:iagree: 8) I need to get a user Skeley :ahhh
-
Nice one, Antti! :like:
Combo blade or older plain edge?
Combo blade
Only Tools Matters
-
Got these 4 guys in the mail. $65 shipped. (https://uploads.tapatalk-cdn.com/20190418/af0c78d50bd0c3cee94688f9f13d60ff.jpg)
Sent fra min ANE-LX1 via Tapatalk
Incredible deal. Wow!!!!
This just arrived today. I lightly used PST2 and leather sheath. An early one from before Leatherman started stamping the name on the handles. And as luck would have it, it’s from January of 1997, the same month and year as my PST.
(https://i.imgur.com/BUKWu7Ih.jpg)
(https://i.imgur.com/rcOtacsh.jpg)
(https://i.imgur.com/89xOmdNh.jpg)
(https://i.imgur.com/Ckm2W6fh.jpg)
(https://i.imgur.com/eewTNfNh.jpg)
(https://i.imgur.com/aPqUIq1h.jpg)
-
Sheath and tool both look excellent :drool: :like: Congrats :cheers:
-
Incredible deal. Wow!!!!
This just arrived today. I lightly used PST2 and leather sheath. An early one from before Leatherman started stamping the name on the handles. And as luck would have it, it’s from January of 1997, the same month and year as my PST.
(https://i.imgur.com/BUKWu7Ih.jpg)
(https://i.imgur.com/rcOtacsh.jpg)
(https://i.imgur.com/89xOmdNh.jpg)
(https://i.imgur.com/Ckm2W6fh.jpg)
(https://i.imgur.com/eewTNfNh.jpg)
(https://i.imgur.com/aPqUIq1h.jpg)
Nice! :like:
I've deemed mine PST2-incognito. :D
-
Nice scores Antii an Buzz ! :like:
-
Incredible deal. Wow!!!!
This just arrived today. I lightly used PST2 and leather sheath. An early one from before Leatherman started stamping the name on the handles. And as luck would have it, it’s from January of 1997, the same month and year as my PST.
(https://i.imgur.com/BUKWu7Ih.jpg)
(https://i.imgur.com/rcOtacsh.jpg)
(https://i.imgur.com/89xOmdNh.jpg)
(https://i.imgur.com/Ckm2W6fh.jpg)
(https://i.imgur.com/eewTNfNh.jpg)
(https://i.imgur.com/aPqUIq1h.jpg)
Good score Bb! :like:
-
Nice! :like:
I've deemed mine PST2-incognito. :D
“Incognitool”. :rofl:
-
“Incognitool”. :rofl:
:rofl: good one, Buzz!
-
Very nice LM Buzz :like: :tu:
-
Zee Core!!!
-
My (Late) Wife bought me a Leatherman MUT in December 2018, it was coming from the UK and going to Perth, Western Australia. It arrived the day after she passed on the 24th Jan 2019.
I got it engraved that weekend.
(https://uploads.tapatalk-cdn.com/20190310/d6668e2f802d7e3576d63a9216fe3584.jpg)
Sent from my iPhone using Tapatalk
Just catching up on some reading and saw this, sorry mate, my condolences.
-
Nice collection Raoul :like: :tu:
-
Great pic, Raoul :cheers: and congrats on getting a Core :salute: :like:
-
Does this count?
:drool:
Should be here Monday
-
:dd:
-
Nice one tosh I was looking at that cabinet on eBay :tu: :like:
-
Hey Tosh!
What a thing of beauty - however it needs to be weighted down with vintage multipliers :like: :gimme:
:multi:
-
Cheers everyone
I must confess that it was a lucky score. I found it by chance and made the seller a offer...the rest is history as they say.
She won't let me display tho'. I need a man cave!
-
Dear smurf-lord. A gorgeous LM display and it is forbidden to display it? That is some serious MT-purgatory. :ahhh
Nice find, tosh!
-
That’s just >:D if you are not aloud to display your tools :facepalm:
-
Dear smurf-lord. A gorgeous LM display and it is forbidden to display it? That is some serious MT-purgatory. :ahhh
Nice find, tosh!
That’s just >:D if you are not aloud to display your tools :facepalm:
I get where she's coming from...
An 11yr old son that almost daily brings back his friends - I think she just doesn't want a MT (AKA knife) display that starts rumours. "So and so dad collects knives", "has them displayed in the house" etc etc
It's not really something I want to be known for - nobody really knows about my collection. My partner and son and two very close mates...that's it....Oh' and you lot!! :pok: :D
Besides, out of sight means I appreciate them more when they do come out.
-
You definitely need a man cave tosh :tu:
-
I get where she's coming from...
An 11yr old son that almost daily brings back his friends - I think she just doesn't want a MT (AKA knife) display that starts rumours. "So and so dad collects knives", "has them displayed in the house" etc etc
It's not really something I want to be known for - nobody really knows about my collection. My partner and son and two very close mates...that's it....Oh' and you lot!! :pok: :D
Besides, out of sight means I appreciate them more when they do come out.
Makes sense now. :cheers:
Believe me, the reputation as "the guy who owns a thousand Leathermans" is aggravating, as you rightly assume. For one, I only have 350 MTs/SAKs. And secondly, only a small portion are Leathermans. But, in the US, some people even call a $10 Wal-mart tool a "leatherman." I refer to such people as 'Tool-Bozos'.
I don't even display mine(not yet anyway...haha). :)
-
Collected my TTI today. :woohoo:
Like new condition so I think this may also get locked away until I find a ‘user’. But I think I’ll still do a short write-up on my thoughts compared to a few of my other LMs. Even with Free breaking cover, I am sure many will still see the Charge as a desirable MT. :dunno:
-
Nice one Max :like: :tu:
-
:hatsoff: thanks WS
-
Collected my TTI today. :woohoo:
Like new condition so I think this may also get locked away until I find a ‘user’. But I think I’ll still do a short write-up on my thoughts compared to a few of my other LMs. Even with Free breaking cover, I am sure many will still see the Charge as a desirable MT. :dunno:
Looking forward to reading your thoughts on the TTi+, Max! :popcorn:
-
Thanks GLBM. :hatsoff: I posted across in the Charge Owners thread: https://forum.multitool.org/index.php/topic,24550.msg1927730.html#msg1927730 (https://forum.multitool.org/index.php/topic,24550.msg1927730.html#msg1927730) :popcorn:
-
(https://forum.multitool.org/index.php?action=dlattach;topic=81316.0;attach=432749)
-
(https://forum.multitool.org/index.php?action=dlattach;topic=81316.0;attach=432749)
Whatever bad has been said about the Free series..... No bit driver ? Price too high ?
That is one handsome multitool!
-
There will never be the perfect multi-tool unless is specially made to order according to a customer's specifications and designed specifically to fulfill a particular set of requirements ::)
-
Thank goodness for that! :tu:
Otherwise this forum would get boring pretty quickly. :facepalm:
-
(https://forum.multitool.org/index.php?action=dlattach;topic=81316.0;attach=432749)
:dd:
Whatever bad has been said about the Free series..... No bit driver ? Price too high ?
That is one handsome multitool!
:iagree: & :like:
There will never be the perfect multi-tool unless is specially made to order according to a customer's specifications and designed specifically to fulfill a particular set of requirements ::)
:iagree: & :like:
Thank goodness for that! :tu:
Otherwise this forum would get boring pretty quickly. :facepalm:
:iagree: & :like:
-
Thanks. Yup, looks were decidedly a factor in the design of this tool. Also in my acquiring it :D
Just hope looks didn't bump function to second place though. So far it handkes well but I've yet to use it. Maybe I'll remodel the resort room heheh.....
-
I will say that the Free Ps really need a slip over bit driver for the phillips bit. I am not too confident putting serious torque on the thinner drivers. The thin implements have performed adequately so far, but I have been attentive to the fact they don't look as robust as other flat drivers. :ahhh
-
Got this today
PST (https://uploads.tapatalk-cdn.com/20190508/1dadaa9a194108b0dcf8ef21ae643611.jpg)
Only Tools Matters
-
Nice one Antti :like: :tu:
-
Some very nice looking LM, guys :dd: :like:
-
G
Nice one Antti :like: :tu:
:iagree:
-
Wow, the last two new LM's here were the very first and the very last offers from Leatherman.
Very cool guys :like:
-
Went into Cork city today for regular shopping.
Turned out not to be that regular after all.
Got myself a brand spanking new Leatherman Mini Tool :ahhh
He actually had 2 so there is one left for you guys if you'll be in Cork city and time soon :pok:
That brownish residue you can see on the fully opened tool inside the handle was some old oil.
Cleaned up nicely.
Man, I love that thing :tu:
-
:dd: Wow :o great score Matt ! :cheers: :tu:
-
:iagree: Nice one Matt :like: :tu:
-
Thanks Steve and Wim... Pure luck (that the missus wasn't there) :D
-
:rofl: :like:
-
:dd: Wow :o great score Matt ! :cheers: :tu:
:iagree: :drool: :like:
-
Thanks Steve and Wim... Pure luck (that the missus wasn't there) :D
::)
So true :rofl: :like:
-
:hatsoff: Poncho
-
Oh that Mini... :drool:
Awesome score Matt... :like:
Sent from my iPhone using Tapatalk
-
Went into Cork city today for regular shopping.
Turned out not to be that regular after all.
Got myself a brand spanking new Leatherman Mini Tool :ahhh
He actually had 2 so there is one left for you guys if you'll be in Cork city and time soon :pok:
That brownish residue you can see on the fully opened tool inside the handle was some old oil.
Cleaned up nicely.
Man, I love that thing :tu:
23 Paul St
Cork City
Damn, that’s 13 thousand kilometers away. :facepalm:
-
A man can never have too many Waves. His wife thinks he can, but she's wrong.
-
Oh that Mini... :drool:
Awesome score Matt... :like:
Sent from my iPhone using Tapatalk
Cheers Jaya... :cheers:
-
A man can never have too many Waves. His wife thinks he can, but she's wrong.
Great carry SC :like: :tu:
-
23 Paul St
Cork City
Damn, that’s 13 thousand kilometers away. :facepalm:
I'd say it's worth it :dunno:
... and we could meet up for a tool chat with beer.
Lots of old pubs around, beautiful landscape... :pok:
-
A man can never have too many Waves. His wife thinks he can, but she's wrong.
... and how would she know? They look all the same :like:
-
I'd say it's worth it :dunno:
... and we could meet up for a tool chat with beer.
Lots of old pubs around, beautiful landscape... :pok:
Don't joke Matt - already looked at their website and they only have a phone number...no email. So I doubt they ship internationally. :facepalm:
My Wife's 1/4 Irish so we've always threatened to go. And I do prefer Irish whiskey - Connemara a favourite :cheers:
-
... and how would she know? They look all the same :like:
"Oooh, dad! Titanium! Isn't that what you've always wanted?" says my 10 year-old as I casually flip the handles on my newly acquired TTI...thinking the wife, sitting next to me, will assume it's just the one Wave I have...true story!
-
... and how would she know? They look all the same :like:
She knows. She always knows. It's like a super-power.
:dunno:
-
Don't joke Matt - already looked at their website and they only have a phone number...no email. So I doubt they ship internationally. :facepalm:
My Wife's 1/4 Irish so we've always threatened to go. And I do prefer Irish whiskey - Connemara a favourite :cheers:
Yeah, I'm amazed that website works :D
Sooo... let me know when you're around then :D
-
"Oooh, dad! Titanium! Isn't that what you've always wanted?" says my 10 year-old as I casually flip the handles on my newly acquired TTI...thinking the wife, sitting next to me, will assume it's just the one Wave I have...true story!
:facepalm:
-
She knows. She always knows. It's like a super-power.
:dunno:
Mrs Matt didn't say anything yet... although I played around with the new Mini Tool in front of her the whole day :dunno:
-
My mother picked this up for $1 at a yard sale this morning and gifted it to me. My mother rocks. :woohoo:
A half hour of cleaning/oiling and it looks brand new. The sheath still looks worn, but not in a bad way. :)
(http://imgur.com/PSkD4N3.jpg)
(http://imgur.com/MNTGOHK.jpg)
(http://imgur.com/ZqZ1qYb.jpg)
(http://imgur.com/RMlK4vE.jpg)
(http://imgur.com/AiSp7fY.jpg)
Photo with a JPST.
(http://imgur.com/wotSXYU.jpg)
-
Awesome deal :o and love the pics :dd: :like:
I think my grandmother bought my grandfather's PST for $5 at a yard sale and that is the one I ended up inheriting :cheers: So I guess that $5 purchase led me here years later and here we are now :D
-
Your granny rocks ! Sweet score :cheers:
-
Awesome deal :o and love the pics :dd: :like:
I think my grandmother bought my grandfather's PST for $5 at a yard sale and that is the one I ended up inheriting :cheers: So I guess that $5 purchase led me here years later and here we are now :D
Many thanks, Poncho! :cheers:
Indeed. Here we are. :)
So cool that your grandmother's wise purchase and gift to your grandfather started your multitool journey. :multi:
-
Nice one GLBM :like: :tu:
-
GBLM your Momma rocks as well ! awesome score for a buck ! :cheers:
-
Give your mother a big hug for that beauty. Maybe dinner too!
Sent from my iPhone using Tapatalk
-
Free(dom)
-
Nice pic Raoul :like: :tu:
-
:iagree:
-
Nice score momma, congrats GLBM :tu:.
-
Thank you, gentlemen! :cheers:
-
Your granny rocks ! Sweet score :cheers:
She is 86 and still kicking :D Only grandparent I have left now but As I am almost 40 myself this is still pretty good :tu:
-
Nice pic Raoul :like: :tu:
:iagree: :like:
-
A PST here as well (0595). Not as nice a GLBM's, but I'm happy with it nonetheless. My first and most likely last and only PST, I just wanted to experience it, and wow, no wonder there's such love surrounding it, so light, slim purposeful. Tim Leatherman really got something right here.
-
:like: :tu:
-
+1 :like: :like: :tu:
-
An excellent example, Exeter 8) :like:
-
A gray Juice S2 and a bleu Juice B2 :woohoo:
-
Nice pair Ivo :like: :tu:
-
Thanks Wspeed :hatsoff:
-
Also arrived yesterday , a brand new PST II in it's original box. :woohoo:
-
Very nice love the old style box :like: :tu:
-
I like it also :hatsoff:
-
A PST here as well (0595). Not as nice a GLBM's, but I'm happy with it nonetheless. My first and most likely last and only PST, I just wanted to experience it, and wow, no wonder there's such love surrounding it, so light, slim purposeful. Tim Leatherman really got something right here.
Very nice find there, Exeter! :like:
As far as being nice, the one my mother found required a lot of resto work. They are always nicer when they don't need any work. :ahhh
-
A gray Juice S2 and a bleu Juice B2 :woohoo:
Very Juicy acquisitions, Ivo! :like:
-
Also arrived yesterday , a brand new PST II in it's original box. :woohoo:
Great find, Ivo! :like:
-
I got my fake LM Tread today :mail:
Excellent quality for a fake but a lot cheaper than the real one :woohoo:
-
It's not a LM though. :pok: :whistle: :D
Still cool anyway. :like:
-
Yes but 4 times cheaper :D
-
1999 NIB PST, in sealed blister pack :salute:
A little oxidation on the sheath’s brass rivets, and it looks like a spot of surface rust on the cutters, so this baby’s getting released from its packaging...20 years on. Look away now if you’re a collector of unopened MTs. :facepalm:
More pics to follow once I’ve got over the excitement. :ahhh
-
Nice one Max look forward to you opening the blister pack :like: :tu:
-
Oooh Max very nice :like:
-
Sliced the blister where it was folded at the bottom. Could then slide out the PST and sheath without further damage to the packaging. :tu:
PST needs a gentle wipe with an oil rag after 20 years in plastic. But everything perfect, blade sharp, nice snap on the pliers and tools. Dated 1100 how cool is that!
Sheath rivets have quite a bit of green copper corrosion but simply wipes off. A little oil on a qtip should sort them out.
Nice surprise in the sheath...user guide, accessory brochure and registration page. Wonder if I register if I can still qualify for the cash draw? :think:
Something special about being the first-time user of this classic Leatherman. I’ll put the sheath away but will certainly carry the PST on special days, and use with care. :salute:
-
Nice one Max very cool :like: :tu:
-
A few more pics... :salute:
-
Nice one Max very cool :like: :tu:
Thanks WS. :hatsoff:
-
That is awlsome, Max! :like:
Love that feeling of freeing old tools that have been locked away in plastic for years. I've only ever had reservations about doing it one time, but I generally enjoy opening vintage blisters. :D
-
Thanks for showing the LM to us Max :cheers: :like:
-
Nice one Max very cool :like: :tu:
:iagree: .... total win!
-
I got my fake LM Tread today :mail:
Excellent quality for a fake but a lot cheaper than the real one :woohoo:
Very cool Wim :tu:
Should be posted here? :D ...
https://forum.multitool.org/index.php/board,55.0.html (https://forum.multitool.org/index.php/board,55.0.html)
-
Thanks Matt I didn’t think of that :cheers: :like:
-
Thanks Matt I didn’t think of that :cheers: :like:
... kinda meant as a joke... but what do I know? :D
-
That is awlsome, Max! :like:
Love that feeling of freeing old tools that have been locked away in plastic for years. I've only ever had reservations about doing it one time, but I generally enjoy opening vintage blisters. :D
Thanks GLBM, WS and Matt. :hatsoff:
-
(https://uploads.tapatalk-cdn.com/20190530/9168778341ebc6bfe0e6b941963e1849.jpg)
-
Thanks GLBM, WS and Matt. :hatsoff:
:cheers:
(https://uploads.tapatalk-cdn.com/20190530/9168778341ebc6bfe0e6b941963e1849.jpg)
Congrats on the Crunch, Sos24! :cheers:
-
(https://uploads.tapatalk-cdn.com/20190530/9168778341ebc6bfe0e6b941963e1849.jpg)
Love my Crunch, hope you'll too :like:
(https://media.giphy.com/media/3orieTNgcNATQ29Y88/giphy.gif)
-
Nice pic of the Crunch Sos :like: :tu:
-
... kinda meant as a joke... but what do I know? :D
I know it was but it would of been
good for the cheap and cheerful thread :cheers: :like:
-
Thanks Wspeed and GLBM
Love my Crunch, hope you'll too :like:
(https://media.giphy.com/media/3orieTNgcNATQ29Y88/giphy.gif)
I am really liking it so far.
-
Nice one Sos glad you like the Crunch :like: :tu:
-
Nice one Sos glad you like the Crunch :like: :tu:
+1 :iagree:
-
Some excellent tools Ivo, Ws, Max and Sos :drool: :like:
-
:iagree:
That PST Max. Good for you opening the package. :salute:
-
Thanks Poncho, Aloha. :hatsoff:
Much better out than in. :salute:
-
Thanks Poncho :cheers: :like:
-
Some excellent tools Ivo, Ws, Max and Sos :drool: :like:
:iagree:
That PST Max. Good for you opening the package. :salute:
:iagree: x2 :like:
-
Thanks Steve :cheers: :like:
-
Today I got myself a LT PIRANHA
-
Nice one Ivo :like: :tu:
-
Leatherman Freestyle. Its an interesting tool. Guess it all you wanted was pliers and blade :dunno:
-
Great tool Aloha :like: :tu:
-
Thanks. Feels chubbier in hand vs Skeletool :think:. I'll stick with the Skeletool personally.
-
That’s a shame :facepalm:
-
S30V blade in it might be cool. I just really like that bit holder tho.
-
Bit holder is always a plus for me :tu:
-
Unused 1998 Mini Tool. :woohoo: :woohoo:
So happy right now!
-
Nice one Max :like: :tu:
-
Unused 1998 Mini Tool. :woohoo: :woohoo:
So happy right now!
Great find, Max! :o
:like:
-
Thanks GLBM, WS :hatsoff:
Everything’s mini on this tool...I love the 1.5in clip point blade! :tu:
Why did they stop making this model?
-
Nice one Max :like: :tu:
-
Nice Mini Max ! :cheers:
-
Thanks Steve, so pleased I could find one at last. :hatsoff:
-
Thanks GLBM, WS :hatsoff:
Everything’s mini on this tool...I love the 1.5in clip point blade! :tu:
Why did they stop making this model?
So they can bring the MiniTool back years later, as a limited edition, and charge $200 for them at some point. Like the PST. :D :whistle:
-
Thanks GLBM, WS :hatsoff:
Everything’s mini on this tool...I love the 1.5in clip point blade! :tu:
Why did they stop making this model?
Great score! I was giddy when I found my 1995 version and sheath (in well-used condition) for $15. At least yours has the hard wire notch, mine precedes that by at least a year. A lot of people seem to dislike the blade, but I do. Great for detail work.
I could see them bringing it back, but it does need some changes. The openers are useless, I've tried them both and they sucked. And the file's screwdriver tip will not fit the ever-present Phillips screw. Maybe replace it with a modified version (shorter, cross-cut, and using thicker stock, but the same tip) of the Style file? And of course, a Rebar plier head.
-
Some good ideas cody. It’s such a useful size and there’s room for improvements given the advances over the last couple decades. :tu:
-
Picked up this 2003 Wave from the same seller as the Mini Tool. :woohoo:
Non-locking 1st gen model. Build quality is excellent. Wave still rocks 15+ years later!
-
Just arrived in the door
(https://i.imgur.com/9BgbD03.jpg)
-
Picked up this 2003 Wave from the same seller as the Mini Tool. :woohoo:
Non-locking 1st gen model. Build quality is excellent. Wave still rocks 15+ years later!
Wowza! Great find, Max! :drool:
Those anniversary versions are pretty hard to find these days. :ahhh
Just arrived in the door
(https://i.imgur.com/9BgbD03.jpg)
:like:
-
Great finds Max and jonon9 :like: :tu:
-
Thanks WS, GLBM. :hatsoff:
-
Finally after 1,5 years searching I have a new LT Flair :woohoo:
-
SOme very awesome finds guys :o :drool: :like: Been a while since I had anything new :ahhh Need to start looking again :facepalm: :D
-
Great find Ivo :like: :tu:
-
Thanks guys :drink:
-
Finally after 1,5 years searching I have a new LT Flair :woohoo:
Sweeeet! :o :like:
-
Thanks GLBM, WS :hatsoff:
Everything’s mini on this tool...I love the 1.5in clip point blade! :tu:
Why did they stop making this model?
Every time I pick up my mini I ask this question..without a doubt the biggest :think: I have about Leatherman. This tool is literally perfection. Its size and capabilities put it in a category of its own. Not to mention the overly strong clip point blade which is amazing for chip cutting wood.
If I was ever to become a collector...the mini is what I would collect.
-
Finally after 1,5 years searching I have a new LT Flair :woohoo:
That does deserve a party! You can try out the corkscrew! :like:
-
That does deserve a party! You can try out the corkscrew! :like:
:iagree: :drink:
-
Unused 1998 Mini Tool. :woohoo: :woohoo:
So happy right now!
Welcome to the club :like:
-
Thanks Matt! :hatsoff: it is a lovely little MT! :tu:
-
Well there is a 25% off coupon right now for Ace hardware, Wingman for $30 with a sheath, the previous 2 I had sold I don't think had sheaths so this seemed like a pretty good deal.
On a bit of a roll hunting these LM's for good prices before tax in the past year; Rev for $7, Wave $30-$35 cant remember, Squirt $27, Juice B2 $13
-
So my first Crunch. :woohoo:
Never seen one in the hand, just online and the drool shots on the forum. So you can just imagine my excitement opening up this box today of an unused ‘99 model. Kinda lost for words...
-
Nice one Max :like: :tu:
-
:hatsoff: turns 20 next month. So a small celebration will be in order. :cheers:
-
We can have a drink on that one Max :cheers: :D
-
So my first Crunch. :woohoo:
Never seen one in the hand, just online and the drool shots on the forum. So you can just imagine my excitement opening up this box today of an unused ‘99 model. Kinda lost for words...
Outstanding example, Max! I was hoping you found a first year Crunch. The 99' has a quality level that is unmatched by any other tool made in the 1990s. IMO of course. :like:
-
Thanks WS, GLBM. :hatsoff:
It is quite a little masterpiece. The little details boggle, like the v-cuts that form the stops, the dimple to retain the plier head when closed, the wheel inside the handle, how it all folds together. Even the tools have a SAK-like snap when opening and closing. They got it so right...and unchanged, still selling 20 years on. More than anything, this probably represents more of the engineering mastermind of Tim Leatherman than any of his other tools. :like:
-
Thanks WS, GLBM. :hatsoff:
It is quite a little masterpiece. The little details boggle, like the v-cuts that form the stops, the dimple to retain the plier head when closed, the wheel inside the handle, how it all folds together. Even the tools have a SAK-like snap when opening and closing. They got it so right...and unchanged, still selling 20 years on. More than anything, this probably represents more of the engineering mastermind of Tim Leatherman than any of his other tools. :like:
Well said, Max! :cheers:
I would have really liked to have seen a PST with that style locking mechanisn as well. :dd:
Now I need to find a used one to carry. :facepalm:
-
:iagree: :facepalm:
-
Just arrived , a black OHT :woohoo:
-
Just arrived , a black OHT :woohoo:
Nice choice with the BO version, Ivo! :like:
-
Nice one Ivo your collection is growing quickly :like: :tu:
-
Thanks guys :cheers:
I must slow down a bit , it is very expensive all these SAKs and LTs :whistle:
-
:iagree: not cheap at all
-
Nice scores Max and Ivo
-
Thanks SteveC :cheers:
-
Thanks Steve :hatsoff:
-
I present to you all, the newest member of the family!!! It's a '17 model that was at a big-brand-blue-crew-store and had no sheath (someone had "liberated it" from the blister package); I'd been eyeing it for months but had not seen it this past month 'til today. I was at the store browsing when, I heard a customer ask for "that knife that was on special and if it had been reduced more" ; when I turned, the associate had the ST in his hands, and said "no; same price as last time, half its latest price tag". Customer left it; I took it! And since I had a NIP Surge Premium Leather Sheath... :woohoo:
-
And, here's the rest of the family...!
(Hoping for one day be as large as some of yours!!! :drool:)
-
Great looking family and NICE deal! :like:
-
Thanks, Aloha!
:cheers:
-
So my first Crunch. :woohoo:
Never seen one in the hand, just online and the drool shots on the forum. So you can just imagine my excitement opening up this box today of an unused ‘99 model. Kinda lost for words...
Great score Max! :like:
Just arrived , a black OHT :woohoo:
Good one! :like:
I present to you all, the newest member of the family!!! It's a '17 model that was at a big-brand-blue-crew-store and had no sheath (someone had "liberated it" from the blister package); I'd been eyeing it for months but had not seen it this past month 'til today. I was at the store browsing when, I heard a customer ask for "that knife that was on special and if it had been reduced more" ; when I turned, the associate had the ST in his hands, and said "no; same price as last time, half its latest price tag". Customer left it; I took it! And since I had a NIP Surge Premium Leather Sheath... :woohoo:
Glad you finally scored it! :like:
-
Thanks, David!
:hatsoff:
-
I present to you all, the newest member of the family!!! It's a '17 model that was at a big-brand-blue-crew-store and had no sheath (someone had "liberated it" from the blister package); I'd been eyeing it for months but had not seen it this past month 'til today. I was at the store browsing when, I heard a customer ask for "that knife that was on special and if it had been reduced more" ; when I turned, the associate had the ST in his hands, and said "no; same price as last time, half its latest price tag". Customer left it; I took it! And since I had a NIP Surge Premium Leather Sheath... :woohoo:
Great score! :like: Even after buying several different models, the ST300 is still my go-to Leatherman. It is comfortable to use, and takes on all but the most demanding of tasks--and for that, I grab the real tools. Need to get that bit adapter myself. I had a Gerber I used with it, but lost it somehow.
I had a recent situation like that myself. About 5 years ago, I spotted a Surge at a local military surplus store, that also carried quite a bit of assorted "junk". They wanted $100 for it, despite the fact someone had lost the file and the slip it goes into. Last year, they were clearing out a lot of the stuff the store had, since they were either closing it or merging it with a pawn shop the guy who owns it also had. I ended up getting the Surge for under $50; or around $50 with tax.
-
Thank you, cody6268. And I'd guess that the planets do align once in awhile; at the right place, at the right time. Cheers to you Sir! :cheers:
-
Nice score with the 300, Juan! :like:
It isn't a tool I ever took a liking to, but the build quality and ease of use are much appreciated. With all of the ST300 love I've seen recently, maybe I need to give the 300 another try soon? Perhaps I tried it to early in my MT journey(back in 2017 I think). :think:
-
Thank you, Chief!
Mind you, now its a bit more special knowing that the production year matches your freshman years!!!
:hatsoff::cheers:
-
:cheers:
-
Nice selection of tools Juan :like: :tu:
-
Got the Leatherman P4, most of the YouTube reviews are not good but I like the P4.
-
Congrats, duckman75! :tu:
I'm a fan of the P4 as well. Lots of fun to fiddle with and use. :cheers:
-
Congrats, duckman75! :tu:
I'm a fan of the P4 as well. Lots of fun to fiddle with and use. :cheers:
Thanks :) Been using it as my fidget tool, opening and closing the pliers :) hope it won’t break.
-
Nice one duckman :like: :tu:
-
Thanks :) Been using it as my fidget tool, opening and closing the pliers :) hope it won’t break.
:cheers:
I've beaten up on my P4 a bit and it feels like it did when I got it. I don't think there have been any trends of tooks breaking either? :think:
It is a well made multitool. Top-tier fit & finish as well. I like the ingenuity of the complete ground-up design too. :)
Not going to dethrone the Wave/Charge, but I still enjoy the P4's fun factor. :)
-
:cheers:
I've beaten up on my P4 a bit and it feels like it did when I got it. I don't think there have been any trends of tooks breaking either? :think:
It is a well made multitool. Top-tier fit & finish as well. I like the ingenuity of the complete ground-up design too. :)
Not going to dethrone the Wave/Charge, but I still enjoy the P4's fun factor. :)
I can't seem to loosen up my pliers, when I use it to clamp down on something it seems to get tighter, do your have the same problem?
-
I can't seem to loosen up my pliers, when I use it to clamp down on something it seems to get tighter, do your have the same problem?
The second P4, I bought to use, does the same. Then using the crimper in the back of the pliers head, it loosens again.
It has gotten better with use though and hopefully will continue to get better. I am not a fan of stiff pliers, but LM seems to think selling tools with stiff pliers is O.K and we either have to send the tool back or break it in. Not a good statement for an expensive tool for sure.
I hypothesize that the pivot pin is slightly misshapen, and moves ever so slightly when switching from pliers to crimpers. Hypothetically, the pin should grind down over time/use to an ideal shape.
I weighed the prospects of paying $10 to ship it to LM, waiting several weeks for a replacement, and risk getting another one with tight pliers; against possibly working the issue out during a break in period. I did email LM about it, as it is the second LM I bought with overly stiff pliers. The other one was my Surge I carry sometimes. It has loosened up enough to be quite usable, but I am hoping it loosens up another 10% at some point. :ahhh
LM replied to send it to them for repair, so that option is still on the table if the pliers stop getting better.
-
The second P4, I bought to use, does the same. Then using the crimper in the back of the pliers head, it loosens again.
It has gotten better with use though and hopefully will continue to get better. I am not a fan of stiff pliers, but LM seems to think selling tools with stiff pliers is O.K and we either have to send the tool back or break it in. Not a good statement for an expensive tool for sure.
I hypothesize that the pivot pin is slightly misshapen, and moves ever so slightly when switching from pliers to crimpers. Hypothetically, the pin should grind down over time/use to an ideal shape.
I weighed the prospects of paying $10 to ship it to LM, waiting several weeks for a replacement, and risk getting another one with tight pliers; against possibly working the issue out during a break in period. I did email LM about it, as it is the second LM I bought with overly stiff pliers. The other one was my Surge I carry sometimes. It has loosened up enough to be quite usable, but I am hoping it loosens up another 10% at some point. :ahhh
LM replied to send it to them for repair, so that option is still on the table if the pliers stop getting better.
Thanks for the tip, will just try to wear the pivot down with use. Will just time of it as a fine wine, one that gets better in time :)
-
Here is to hoping the pivot gets right sooner than later. :cheers:
-
Got the following in the mail this morning :mail:
A brand new Limited Edition LM Piranha 2 (Wrangler collaboration from 2015). I've payed 20€ which is the usual price for the regular one over here.
This thing is a solid piece and seems to fit perfectly into the additional compartments of usual LM sheaths.
Bits are held in place very well.
I love the smell of copper in the morning :D
Here's some info about it on MTO...
https://forum.multitool.org/index.php/topic,59137.msg1080741.html#msg108074 (https://forum.multitool.org/index.php/topic,59137.msg1080741.html#msg108074)
-
Nice addition to you collection Matt. I see a badge coming soon... :cheers:
-
Cheers Max :cheers:
... mind you though, it took me 1.5 years to collect those pieces, and the Kershaw was a genouros gift from Fuzzy :D
-
Cheers Max :cheers:
... mind you though, it took me 1.5 years to collect those pieces, and the Kershaw was a genouros gift from Fuzzy :D
I bought one of these single piece tools a while back, not knowing it was for adjusting a weapon. Sits in my draw (no M16 in my house). If I was in the US I’d be happy to fwd to you. :cheers:
-
Thank you very much for the offer Max :hatsoff:
I'm in Ireland though... they took all our M16 a while ago :facepalm:
PS: I'd prefer a Heckler & Koch G3 over the M16 I guess.
-
Oops my bad,sorry Matt. :salute:
H&K sure make some good product.
Here’s the tool...”Rail”, dug our the draw. Never used it 😐 but has a couple long LM bits on the holder that I’ve used once or twice. Guess it looked cool when I bought it, can’t remember when...long time now.
-
That looks like a solid and thoughtfully designed tool... for its intended use :tu:
Should be very popular with soldiers I guess.
-
Good question. I guess they get issued maintenance tools? Maybe as a backup field tool.
-
Oops my bad,sorry Matt. :salute:
H&K sure make some good product.
Here’s the tool...”Rail”, dug our the draw. Never used it 😐 but has a couple long LM bits on the holder that I’ve used once or twice. Guess it looked cool when I bought it, can’t remember when...long time now.
Been thinking about getting a Pump, but my current shotgun doesn't need chokes, and is not a take-down gun (meaning it can't be disassembled for storage/transport) But, the JC Higgins I'm looking at does have the ability to use choke tubes and to break both down for maintenance/cleaning I might need a pin punch. All are of quite some age (the JC Higgins at least 60, the Ithaca 50); and use flat-headed screws pretty much entirely throughout; except the Ithaca's plastic recoil pad is held on with Phillips screws). And the gut-hook will work great if I do decide to go hunting this year (Granddad hasn't hunted in nearly 20 years, but some of my friends are avid hunters to this date).
-
Would be great to go hunting. Both my granddads passed when I was very young but I enjoyed fishing with my dad. Time with family is always the best. :iagree:
-
Decided to check eBay for multitool related stuff and found another Leatherman display case....hopefully it should arrive sometime next week.
-
Cool LM display :like: :tu:
-
Cool LM display :like: :tu:
Thanks :tu:
-
Decided to check eBay for multitool related stuff and found another Leatherman display case....hopefully it should arrive sometime next week.
That is a sharp looking display! Nice find! :like:
-
Arrived last week: - LEAP - RAPTOR - OHT Coyote :hatsoff:
-
Arrived last week: - LEAP - RAPTOR - OHT Coyote :hatsoff:
Woooow,congrats
Sent from my SM-G960F using Tapatalk
-
Decided to check eBay for multitool related stuff and found another Leatherman display case....hopefully it should arrive sometime next week.
Nice tosh. What’s the strange tool inside? :dunno:
-
Arrived last week: - LEAP - RAPTOR - OHT Coyote :hatsoff:
I leapt over the coyote to catch the raptor. Nice lot also Ivo. :like:
-
Thanks marko and Max :cheers:
-
Nice selection of LMs Ivo :like: :tu:
-
Thanks Wspeed :cheers:
-
:hatsoff:
-
Nice tosh. What’s the strange tool inside? :dunno:
Thanks
It looks to be a nut cracker? I'm guessing the seller wanted to show something hanging inside using the magnets.
Apparently the sale also includes 2 leatherman magnetic display stands (2nd picture shows one behind the larger LM display case)
-
Good one tosh. Will be great for displays. :like:
-
My first BO LM, and an ST300 to boot. :woohoo: I forgot that these have the T-shank adaptor which is a useful feature.
-
Nice one Max :like: :tu:
-
Thanks WS. :hatsoff: needs a rub down and some use. :tu:
-
Great additions, Ivo and Max! :like:
-
Thanks GLBM. I’ve almost exhausted this particular seller’s multitool stock. He had a few jewels for sure :-)
-
Thanks GLBM. I’ve almost exhausted this particular seller’s multitool stock. He had a few jewels for sure :-)
:cheers:
That is for sure! :like:
-
Thanks gerleatherberman :cheers:
-
Thanks gerleatherberman :cheers:
:hatsoff:
-
Arrived last week: - LEAP - RAPTOR - OHT Coyote :hatsoff:
Joining Leap challenge? :pok: :pok:
-
Got a BO Original Supertool in the mail today.
Thank you Nix Sir, you're awesome :drink:
I had a sheath with accessories prepared and waiting for it already :ahhh
-
Nice one Matt :like: :tu:
-
Thanks Wim :hatsoff:
-
:2tu:
-
That's a beauty, Matt! :drool:
-
Got a BO Original Supertool in the mail today.
Thank you Nix Sir, you're awesome :drink:
I had a sheath with accessories prepared and waiting for it already :ahhh
Awesome ! :like: :tu:
-
That's a beauty, Matt! :drool:
Awesome ! :like: :tu:
Cheers guys, I'm super excited about it still :cheers:
0498/0698
-
A BO WAVE :hatsoff:
-
Nice one Ivo :like:
-
Sweet! That's going to look beautiful once you start using it! :tu:
-
:iagree: :like: :tu:
-
The Free T4 came today! Finally!
(https://i.imgur.com/mD65Pxk.jpg)
-
Looks good GLBM :like: :tu:
-
Looks good GLBM :like: :tu:
Thank you, Ws! :cheers:
-
Another display case :facepalm:
-
Nice one tosh :like: :tu:
-
Nice one tosh :like: :tu:
Cheers Wspeed
I think I've got some sort of problem here, can't seem to stop buying damn display cases :ahhh
I don't actually know how many I now have?? Got to be pushing 20!! :facepalm:
-
You will be able to sell them soon for a large amount of money
As you will be the only one who has any display units left :D
-
Wow nice tosh :drool: :drool: :drool: :like:
-
I had a new BO surge arrive two days ago(I already own Three but are all older model) I’m waiting on a saw, serrated blade and new file for my trustee work wave from the states. And have just ordered a new BO wave+ About ten minutes ago.
To be fair I have not bought a multitool in six years so I don’t feel so bad
-
Nice choices chip. :like:
-
Thanks, I also have a new swisstool spirit arriving from amazon tool. Shh keep that under your hat.
-
Your secret’s safe :cheers: I’m a knight so also a Vic fan...more Vics than LMs but mostly 91mm.
-
Original Charge Ti, 2004 NIB. :woohoo:
Love the finish on the Titanium. Leather sheath is snap closure, with side pockets and slot for bits. Supports vertical and horizontal belt carry. I can see why forum members like the Ti. :tu:
-
BNIB old school wave with bit driver,
(https://i.imgur.com/Bvtrfse.jpg)
(https://i.imgur.com/2GdUKTN.jpg)
(https://i.imgur.com/yM5cd0e.jpg)
(https://i.imgur.com/rFnwO6A.jpg)
(https://i.imgur.com/oqbHQDm.jpg)
it looks and feels quite dainty compared to a modern wave
-
Very nice chip. :like: I have the earlier tool model that’s keyed to the handle so does not fit the Wave. Still to find the later version.
Original Wave with the slimmer blades is cool :like:
-
Very nice chip. :like: I have the earlier tool model that’s keyed to the handle so does not fit the Wave. Still to find the later version.
Original Wave with the slimmer blades is cool :like:
thanks I am very pleased with it :cheers:
-
Excellent tool chip :like: :tu:
-
Excellent tool chip :like: :tu:
Ta :salute:
-
:hatsoff:
-
Joining the Ti today was this Fuse. My first of these Zytel plastic-enhanced tools. Unused 2010 model, needs a little cleaning but otherwise spotless. Close-up of the elliptical pivot area introduced with the Fuse and later LM models. Nylon sheath somewhat forgettable.
-
Nice one Max :like: :tu:
-
Nice find Max :like:
-
Thanks WS, Ivo. :hatsoff:
-
A late 80's PST
-
Great tool Raoul :tu: :like:
-
PST rocks! Nice to see all the interest in the older LM tools :like:
-
BNIB old school wave with bit driver,
it looks and feels quite dainty compared to a modern wave
I would recommend you not to throw that box out.
-
I would recommend you not to throw that box out.
:tu: I have kept the boxes for all my multi tools accept for the ones that came in blister packs/clamshell packs (I hate blister packs) the boxes take up more room than the tools themselves. :cheers:
-
Just delivered a BO ST300 and a SIGNAL both new with sheath :hatsoff:
-
Nice ones Ivo :like: :tu:
-
Thanks Wspeed :cheers:
-
Just delivered a BO ST300 and a SIGNAL both new with sheath :hatsoff:
Very nice, Ivo! :like:
-
Very nice ivo, especially the st300
-
Thanks guys :cheers:
-
Another ATF branded Squirt E4 to go with the previous one. This one with “Explosives Training”. Wonder if they give these away at training classes? :cheers:
-
They are cool :like: :tu:
-
Thanks Ws, the E4 is a neat tool.... even has tweezers 😜. :hatsoff:
-
Nics Squirts Boonies :like:
-
Just delivered :hatsoff:
JUICE KF4 and BO MINI
-
Nice ones Ivo :like: :tu:
-
(http://www.sherv.net/cm/emoticons/thanks/animated-thanks-smiley-emoticon.gif) (http://www.sherv.net/) Wspeed :cheers:
-
Both nice Ivo :like:
But the BO Mini with box is very special :like:
-
T2 - I can call it complete today as my pocket clip came in and I installed it. Now, it could be useful.
(https://uploads.tapatalk-cdn.com/20190730/35386136394940d738d1bf90c7abc59f.jpg)
-
Nothing special at all. But I got a new Wave+ to replace the one I gave to my brother when I saw him right before I moved away to TN. Like I said, nothing much but it fills an empty spot and made me a little more happier...
-
Nothing special, it’s only the greatest multitool ever devised by man, :D well it’s my favourite anyway :tu:
-
Just delivered :hatsoff:
JUICE KF4 and BO MINI
Those are both great acquisitions! A BO Mini is for sure on my list!
-
Nothing special, it’s only the greatest multitool ever devised by man, :D well it’s my favourite anyway :tu:
I guess I was too quick to downplay it. I mean I definitely gave it a place in my collection. Three times now! I just feel it doesn't quite compare to a lot of the older and more rare tools I see so often around here...
-
Nothing special, it’s only the greatest multitool ever devised by man, :D well it’s my favourite anyway :tu:
Wave is my “go to” Leatherman for EDC if I know it’s going to get a lot of use... :iagree:
-
Nice LMs guys :like: :tu:
-
Nice LMs guys :like: :tu:
:iagree: :like:
-
Today I added another PS Style to replace ones given away.
The first one went to my nephew who was so excited when he saw mine because it was a tool he could take to school. Then another went to my wife when she was going to visit in the hospital where she didn’t want anything that could be considered a “weapon”. I know at least one niece really liked the one I gave her brother, so this may need replacing before long.
-
Nice one Sos :like: :tu:
-
Today I added another PS Style to replace ones given away.
The first one went to my nephew who was so excited when he saw mine because it was a tool he could take to school. Then another went to my wife when she was going to visit in the hospital where she didn’t want anything that could be considered a “weapon”. I know at least one niece really liked the one I gave her brother, so this may need replacing before long.
That's great, that's how you do it. Keep the wheel spinning round and round...
-
That's great, that's how you do it. Keep the wheel spinning round and round...
I grew up with you always had a knife and flashlight with you, and trying to get my nieces and nephews to believe the same. Now with knives not being allowed everywhere, the PS Style gives at least some tool capabilities even where knives are not allowed.
-
I grew up the same except it was a knife and matches or a lighter. For my son's last b-day I gave him a Micra and a pocket LED light. You're absolutely right.
-
orange fuse. :tu:
-
Very nice chip. :like: I have the earlier tool model that’s keyed to the handle so does not fit the Wave. Still to find the later version.
Original Wave with the slimmer blades is cool :like:
i have the latest version of the tool adapter that fits the new wave. It’s in new condition.i will post it for sale soon .
-
Another ATF branded Squirt E4 to go with the previous one. This one with “Explosives Training”. Wonder if they give these away at training classes? :cheers:
Very cool. I like SAKs and MTs engraved with logos of goverment agencies; but this is the first LM (after several Vic and Spyderco) I have seen. First I've also seen that A: didn't have RadioShack Branding and B: not red .It looks like a standard Storm Gray LM, but I've never seen a Squirt EL in that color.
-
Nice LM Fuse ABURABURA :like: :tu:
-
:salute:
Nice LM Fuse ABURABURA :like: :tu:
-
orange fuse. :tu:
Nice ABURABURA :like: :drool: :drool: :drool: :drool:
-
Just delivered , a Limited Edition SIGNAL from BEVER in NL :hatsoff:
-
Nice one Ivo :like: :tu:
-
Very nice Ivo :drool:.
I've been looking at that one all weekend on the Bever.nl site, decided not to go for it since you can't have them all ...
Checked today to confirm that the deal on the Signal had ended, turns out it's still on sale :ahhh.
-
Thanks Wspeed and TG :cheers:
I need only one. :hatsoff:
-
Very nice Ivo :drool:.
I've been looking at that one all weekend on the Bever.nl site, decided not to go for it since you can't have them all ...
Checked today to confirm that the deal on the Signal had ended, turns out it's still on sale :ahhh.
Stay strong brother.
-
That's a cool colour combo!
I've seen it in their display in the Maastricht store.
-
I just got my first Leatherman this past weekend.
A Charge Plus TTi(https://uploads.tapatalk-cdn.com/20190812/fa015d211529aeaf95e19d4e616fe4da.jpg)
Sent from my ONEPLUS A6013 using Tapatalk
-
Nice LM Charge :like: :tu:
And welcome to :MTO: alarsen :cheers:
-
My latest Leatherman - awesome vintage badge :)
(https://content-8.foto.my.mail.ru/mail/wowaboro/264/b-755.JPG) (https://content-8.foto.my.mail.ru/mail/wowaboro/264/b-755.JPG)
-
:like: :tu:
-
I just got my first Leatherman this past weekend.
A Charge Plus TTi(https://uploads.tapatalk-cdn.com/20190812/fa015d211529aeaf95e19d4e616fe4da.jpg)
Sent from my ONEPLUS A6013 using Tapatalk
Congrats and welcome ! :cheers:
-
Cool badge wowaboro :like: :tu:
-
Nice ABURABURA :like: :drool: :drool: :drool: :drool:
thanks
-
thanks
i just got these in the mail today! :mail:
-
Nice pair of LMs ABURABURA :like: :tu:
-
Nice pair of LMs ABURABURA :like: :tu:
thanks
-
WOW nice ABURABURA :like:
-
The HYBRID I bought from CeHo :woohoo:
-
Nice one Ivo :like: :tu:
-
Thanks Wspeed :cheers:
I also found a VISTA in a shop in Spain, just payed for it, I hope it does not take long until it arrives. :hatsoff:
-
:like: :drool:
The HYBRID I bought from CeHo :woohoo:
-
The Wave is on clearance for $59 in Walmart Canada. Most of the stores have gotten rid of their outdoor section but my local one still kept the Wave behind the camera section, so scored two of them. :multi:
-
Nice one :like: :tu:
-
1996 PST (0996/1296). It's not in as good a shape as I thought it was, but it's not bad. Blade has a lot of scratching, and a chipped tip. The action is a bit rough, and the pivots show scarring that suggests it was used quite a bit and never oiled. Pliers weren't "stiff" just worked them a couple times and they loosened up--I suspect something in the pivots. But as something to use, big deal. The blade sharpened up just fine, but because of the chipped tip, I might use the PST II blade in my parts bin. That just needs a touchup.
"PREMIX" is a plastics company. I think the beige colored stuff I cleaned off the file and out of the tool in places was sand used for sandcasting; and could suggest the issue behind the rough action. Or even plastic itself.
(https://i.imgur.com/JtEUKUH.jpg)
(https://i.imgur.com/fQk5Xag.jpg)
Blade wear:
(https://i.imgur.com/mpmaQgq.jpg)
File cleaned up good with a file card. Something I had for years ,forgot I had, then found, and now can't do without.
(https://i.imgur.com/FeEtTjB.jpg)
(https://i.imgur.com/CmYOHK9.jpg)
-
Nice one cody :like: :tu:
-
Won this BO LM Kick with clip last night 8)
(https://i.ebayimg.com/images/g/N9oAAOSw3hFdXI93/s-l1600.jpg)
(https://i.ebayimg.com/images/g/kLEAAOSwBxJdXI97/s-l1600.jpg)
-
It looks in excellent condition :like: :tu:
-
:iagree:
Looks great, :tu:
-
Complete with clip, nice one cuz. :like:
-
Thanks guys , won it for $35 :D
-
Won this BO LM Kick with clip last night 8)
(https://i.ebayimg.com/images/g/N9oAAOSw3hFdXI93/s-l1600.jpg)
(https://i.ebayimg.com/images/g/kLEAAOSwBxJdXI97/s-l1600.jpg)
Nice Steve! :like:
I did not even know they did BO clips. I always thought these were accessories. :dunno:
-
Thanks guys , won it for $35 :D
Great price :tu:. I wish you could buy multitools from eBay here in the uk.
-
My latest one!.. ;)
Leatherman did an outstanding job with the Cerakote finish of this tool. I'm glad they improved after the painted orange Wave fiasco.
(https://imagizer.imageshack.com/img924/9240/a4W914.jpg)
-
Nice one :like: :tu:
-
My latest one!.. ;)
Leatherman did an outstanding job with the Cerakote finish of this tool. I'm glad they improved after the painted orange Wave fiasco.
(https://imagizer.imageshack.com/img924/9240/a4W914.jpg)
That's hot ! :dd:
-
Thank you gentlemen! :cheers:
-
:multi: goten myself a Sideclip, too see the fuzz about it...and it came in a combo deal with the Freestyle.
Can't wait to put them to the test
-
Nice find Raoul :like: :tu:
-
Very nice Raoul :like:
-
:iagree:
-
Bought this one three weeks ago, a NIB Original Supertool :D.
(https://i.imgur.com/RB5gFWi.jpg)
The Original Supertool was the first multitool I bought, way back in '94, and it's still one of my favorites.
Here's a pic of my first Leatherman and (one of) the latest one(s):
(https://i.imgur.com/CxGolGk.jpg)
-
Nice! :like:
Sent fra min FRD-L09 via Tapatalk
-
Nice! :like:
Sent fra min FRD-L09 via Tapatalk
Thanks mate :cheers:.
(More pics can be found here (https://forum.multitool.org/index.php/topic,82653.new.html#new))
-
Nice find T-G I like the sticker on the Supertool and the box :like: :tu:
-
Bought this one three weeks ago, a NIB Original Supertool :D.
(https://i.imgur.com/RB5gFWi.jpg)
The Original Supertool was the first multitool I bought, way back in '94, and it's still one of my favorites.
Here's a pic of my first Leatherman and (one of) the latest one(s):
(https://i.imgur.com/CxGolGk.jpg)
What dreams are made of ! :dd:
-
What dreams are made of ! :dd:
:iagree:
-
My Surge came in the mail last Wednesday! Love this tool.
-
The Surge is a excellent tool :like: :tu:
-
First I bought a Hybrid from CeHo, then I found a Vista in a shop in Madrid and now I have found the last one , the Genus , can't wait till it arrives. :woohoo:
I have some problems with my Windows laptop so I'm using now my Mac but I don't have all the tools on the Mac to handle pics so I will post them when my Windows laptop is repaired. :hatsoff:
-
:like: :tu:
-
My Surge came in the mail last Wednesday! Love this tool.
Congrats on the SURGE !!!!! :cheers:
-
Congrats on the SURGE !!!!! :cheers:
The surge is a beast alright, hope you enjoy it. Or should I say you will enjoy it.
-
First I bought a Hybrid from CeHo, then I found a Vista in a shop in Madrid and now I have found the last one , the Genus , can't wait till it arrives. :woohoo:
I have some problems with my Windows laptop so I'm using now my Mac but I don't have all the tools on the Mac to handle pics so I will post them when my Windows laptop is repaired. :hatsoff:
:sa:
That's some score mate, so until you can post those pics I'll be here, waiting...
:popcorn:
;)
-
:sa:
That's some score mate, so until you can post those pics I'll be here, waiting...
:popcorn:
;)
:rofl: :rofl: :rofl:
-
I managed to install a pic resizer so here are the first pics. :hatsoff:
The green VISTA and the yellow HYBRID.
Once the GENUS arrives I share some more pics.
-
Awesome! :tu:
-
Thanks Mechanickal :cheers:
-
I LOVE yellow and black!!! >:D :drool: :like:
-
Nice one Ivo :like: :tu:
-
:like:
https://forum.multitool.org/index.php/topic=66907.0 :pok:
-
Nice one Syncop8r :like: :tu:
-
Those are just... :drool: :drool: :drool:
-
:rofl: :rofl: :rofl:
I spend hours looking for that VISTA , i'm sure there are more stores that still have them.
Here I bought mine : https://www.latiendadecaza.com/leatherman-vista-blister-p-1348.html
I just send them an email if they ship to Belgium and they replied they did so I bought one. They only reply in Spanish so you have to translate all there emails.
Good luck
-
Nice one Syncop8r :like: :tu:
:iagree:
-
I've received a package from CeHo today :mail:
A brand new in box 02/98 Sideclip :ahhh
(https://i.imgur.com/rPZgHmN.jpg)
I love this thing. It has a really nice quality feel...
(https://i.imgur.com/Co12iWt.jpg)
-
Another interesting Juice :)
(https://content-21.foto.my.mail.ru/mail/wowaboro/259/b-757.JPG) (https://content-21.foto.my.mail.ru/mail/wowaboro/259/b-757.JPG)
(https://content-26.foto.my.mail.ru/mail/wowaboro/259/b-759.JPG) (https://content-26.foto.my.mail.ru/mail/wowaboro/259/b-759.JPG)
-
Another interesting Juice :)
(https://content-21.foto.my.mail.ru/mail/wowaboro/259/b-757.JPG) (https://content-21.foto.my.mail.ru/mail/wowaboro/259/b-757.JPG)
Unusual colour? :think:
-
I've received a package from CeHo today :mail:
A brand new in box 02/98 Sideclip :ahhh
(https://i.imgur.com/rPZgHmN.jpg)
I love this thing. It has a really nice quality feel...
(https://i.imgur.com/Co12iWt.jpg)
I just love the old Leatherman Tools, and the Sideclip is one beautiful tool, and yes, they just ooze quality don't they :dd:.
Congrats on getting one of these beauties mate :cheers:.
-
Nice LMs Matt and wowaboro :like: :tu:
-
I just love the old Leatherman Tools, and the Sideclip is one beautiful tool, and yes, they just ooze quality don't they :dd:.
Congrats on getting one of these beauties mate :cheers:.
Cheers TG :cheers:
Yes, it seems I went full circle coming back to the old Leathermans again :tu:
-
Nice LMs Matt and wowaboro :like: :tu:
Thanks Wim :hatsoff:
-
Thanks Wim :hatsoff:
It does look very nice :dd: :like: :like:
-
Nice tools guys :like:
-
It does look very nice :dd: :like: :like:
:pok: :o
-
Nice tools guys :like:
:hatsoff:
-
:pok: :o
Hopefully one day I will be able to get hold of a brand new one :dd:
-
The leatherman fairies visited me again today to drop off a new rebar. It looks a little grubby due to the black oily stuff that always is on new BO tools.
I don't know whether to clean it up before condemning it to the cupboard of doom.
I would like to leave the black oil on as I like to store my collection mint as new and this oil will demonstrate this fact but worried if left on may eventually stain the coyote finish, so may be prudent to remove.
Anyone have any view either way?
(https://i.imgur.com/80JX7aX.jpg)
-
Most types of lubricant, including motor oil, will not harm the coyote finish but I will clean the outside just in case to avoid stains and leave the tools inside with oil ;)
-
Most types of lubricant, including motor oil, will not harm the coyote finish but I will clean the outside just in case to avoid stains and leave the tools inside with oil ;)
Thanks have given it a wipe with a soft cloth :tu:
-
Awesome Chip. Congrats! :like:
-
Awesome Chip. Congrats! :like:
Thanks glockfan, I just need an SS one now to complete the set. :whistle:
-
Nice one chip :like: :tu:
-
Nice one chip :like: :tu:
Thanks Ws :tu:
-
Thanks glockfan, I just need an SS one now to complete the set. :whistle:
:tu:
-
Just snagged a few more Revs before they were gone forever. :tu:
-
The leatherman fairies visited me again today to drop off a new rebar. It looks a little grubby due to the black oily stuff that always is on new BO tools.
I don't know whether to clean it up before condemning it to the cupboard of doom.
I would like to leave the black oil on as I like to store my collection mint as new and this oil will demonstrate this fact but worried if left on may eventually stain the coyote finish, so may be prudent to remove.
Anyone have any view either way?
(https://i.imgur.com/80JX7aX.jpg)
The black grit is the Black Oxide dust from final sharpening.
You do want to clean that grit and dust from the tool.
I am not keen on the motor oil idea, some oils do have additives that will not harm the tool or finish, but can harm the storage box you store your baby.
Simple mineral oil is a good choice, cleans up well, no Oder, no harm to food or containers.
Congrats on the Coyote Brown Rebar. If wanting the SS version, may want to consider the Heritage version for the retro sheath.
Sent from my iPhone using Tapatalk
-
The black grit is the Black Oxide dust from final sharpening.
You do want to clean that grit and dust from the tool.
I am not keen on the motor oil idea, some oils do have additives that will not harm the tool or finish, but can harm the storage box you store your baby.
Simple mineral oil is a good choice, cleans up well, no Oder, no harm to food or containers.
Congrats on the Coyote Brown Rebar. If wanting the SS version, may want to consider the Heritage version for the retro sheath.
Sent from my iPhone using Tapatalk
Thanks that’s very helpful :tu:
-
$33 dollar for both! Not bad :) . :multi: :woohoo:
-
Wow, nice score! :like:
-
Great score :like: :tu:
-
Awesome score :ahhh
-
:iagree: :iagree:
-
Wow that is cheap ABURABURA :like:
-
Just arrived a nice BO PST :hatsoff:
-
Looks in good condition Ivo :like: :tu:
-
yes it is in good condition :cheers:
-
Also just arrived, 2 MICRA's like new , bought them in Estonia :hatsoff:
-
Also just arrived, 2 MICRA's like new , bought them in Estonia :hatsoff:
Nice scissors :cheers:
-
Just arrived a nice BO PST :hatsoff:
Nice BO :tu:
-
Nice ones Ivo :like: :tu:
-
Thanks guys :cheers:
-
Gotta love the PST in BO. :tu:
-
Yes I love them also :cheers:
-
Great LMs, Ivo! :like:
You're doing great with finding some of the less common LMs!
-
Thanks gerleatherberman :cheers:
-
Nice ones Ivo ! :like: :tu:
-
Just arrived, a heavy used BO ST :hatsoff:
-
Nice one Ivo :like: :tu:
-
:iagree:
-
Big like Ivo
Sent from my SM-G960F using Tapatalk
-
Thanks guys :cheers:
-
Just got a ST300 and 2 PS4 squirts. :tu:
-
Nice ones BM :like: :tu:
-
A very excellent looking tool, Ivo :like:
-
The latest 3...
Micra, Sideclip and ST200.(https://uploads.tapatalk-cdn.com/20191109/856b7b894a4c5d04f5e04bd7cf6ad8cc.jpg)
Sent from my BLA-L09 using Tapatalk
-
Nice selection of tools Hood :like: :tu:
-
Thanx WSpeed, slowly making my collection grow bigger.
Sent from my BLA-L09 using Tapatalk
-
They are definitely nice LMs for your collection :like: :tu:
-
Thanx, here is the whole bunch together. (https://uploads.tapatalk-cdn.com/20191109/c50f446f98c516a1938b80d5f99155f6.jpg)(https://uploads.tapatalk-cdn.com/20191109/dd2a32b5388f621c64252f62e5577630.jpg)(https://uploads.tapatalk-cdn.com/20191109/d24bb07e0e730acd60bb6175e350ebce.jpg)
Sent from my BLA-L09 using Tapatalk
-
Nice collection Hood :dd: :like: :like:
-
The latest 3...
Micra, Sideclip and ST200.(https://uploads.tapatalk-cdn.com/20191109/856b7b894a4c5d04f5e04bd7cf6ad8cc.jpg)
Sent from my BLA-L09 using Tapatalk
Trifecta of Sweetness ! :dd:
-
Thanx, here is the whole bunch together. (https://uploads.tapatalk-cdn.com/20191109/c50f446f98c516a1938b80d5f99155f6.jpg)(https://uploads.tapatalk-cdn.com/20191109/dd2a32b5388f621c64252f62e5577630.jpg)(https://uploads.tapatalk-cdn.com/20191109/d24bb07e0e730acd60bb6175e350ebce.jpg)
Sent from my BLA-L09 using Tapatalk
Great collection! :cheers:
-
Sweet collection pics, Hood :o Thanks for taking the time to take those as I know it takes time to set them up and take pics :salute: :like:
-
Hi guys, so I have the opportunity to get my hands on this guy and its sheath for a lot less that it normally costs new.
Does anybody have one, as a collector is this something that will be good to have in the future..?(https://uploads.tapatalk-cdn.com/20191122/26b784d6423c731ec906264a3aade10c.jpg)(https://uploads.tapatalk-cdn.com/20191122/2bddd4c3376ae084b75d49136eb21d3a.jpg)(https://uploads.tapatalk-cdn.com/20191122/4ce83cdc1c503f065236f721a84fa563.jpg)(https://uploads.tapatalk-cdn.com/20191122/bd50b89354ee1891fae453cba67c3c14.jpg)
Sent from my BLA-L09 using Tapatalk
-
That looks good for a collectors item :like: :tu:
-
:iagree: That is a winner for sure! :like: :cheers:
-
Great collectors item and if you can get it for a good deal then I say go for it :tu: :like:
-
(https://uploads.tapatalk-cdn.com/20191123/02ce730adbda26b3a9f2744ddd85fdcd.jpg)
-
That is a very nice looking Charge mrynnr :like: :tu:
-
Did you pull the trigger on that one yet? :popcorn:
-
Thanx Poncho, Rapidray and Wspeed, I will see if I can get hold of it, the price being what it is makes it a no brainer to get.
Sent from my BLA-L09 using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191123/02ce730adbda26b3a9f2744ddd85fdcd.jpg)
That is so hot, it could melt a hole in the igloo!
Sent from my iPhone using Tapatalk
-
That is a very nice looking Charge mrynnr :like: :tu:
Thank you!
-
That is so hot, it could melt a hole in the igloo!
Sent from my iPhone using Tapatalk
Haha, the snow actually melted here.
-
(https://uploads.tapatalk-cdn.com/20191123/02ce730adbda26b3a9f2744ddd85fdcd.jpg)
:drool: :drool: :drool: :like:
-
I just got the new Woodland Charge +. It is a beauty. Unfortunately I can’t post the pics from my iPhone.
https://www.swissknifeshop.com/products/leatherman-charge-camo-multi-tool-with-black-nylon-sheath
-
That looks really nice :like: :tu:
-
:iagree: :drool: :dd: :like:
-
ooohhh :drool: :drool: :drool: sooo :drool: :drool: :drool: nice :drool: :drool: :drool: :drool: :cheers:
-
:rofl: :rofl: :rofl:
-
I just got the new Woodland Charge +. It is a beauty. Unfortunately I can’t post the pics from my iPhone.
https://www.swissknifeshop.com/products/leatherman-charge-camo-multi-tool-with-black-nylon-sheath
Nice !
(https://cdn.shopify.com/s/files/1/0258/3566/7561/products/LT832706x1000_2000x.jpg?v=1571318699)
-
Nice !
(https://cdn.shopify.com/s/files/1/0258/3566/7561/products/LT832706x1000_2000x.jpg?v=1571318699)
That it is! :cheers:
-
So I took the plunge and got it for myself...
Heritage PST.
(https://uploads.tapatalk-cdn.com/20191130/d02ad747516cc903a21682261e39ab56.jpg)(https://uploads.tapatalk-cdn.com/20191130/ae51cb8874ea928bc1d9251d81ddfb10.jpg)(https://uploads.tapatalk-cdn.com/20191130/71d40c29385cbb3114d3a287014c5a32.jpg)(https://uploads.tapatalk-cdn.com/20191130/e73f34b98bb13edc59e0df3b4edf83b0.jpg)(https://uploads.tapatalk-cdn.com/20191130/197b935d353b087fe6210df269f556bc.jpg)(https://uploads.tapatalk-cdn.com/20191130/b2812bc83519cb181c2b2da0a5a499b3.jpg)(https://uploads.tapatalk-cdn.com/20191130/051fe136a2e333bda4426d4233a48759.jpg)(https://uploads.tapatalk-cdn.com/20191130/47c5154e12855031948fc090f08f4f5a.jpg)
Sent from my BLA-L09 using Tapatalk
-
That is very nice Hood :like: :tu:
-
:iagree: congrats ! :tu:
-
So I took the plunge and got it for myself...
Heritage PST.
(https://uploads.tapatalk-cdn.com/20191130/d02ad747516cc903a21682261e39ab56.jpg)(https://uploads.tapatalk-cdn.com/20191130/ae51cb8874ea928bc1d9251d81ddfb10.jpg)(https://uploads.tapatalk-cdn.com/20191130/71d40c29385cbb3114d3a287014c5a32.jpg)(https://uploads.tapatalk-cdn.com/20191130/e73f34b98bb13edc59e0df3b4edf83b0.jpg)(https://uploads.tapatalk-cdn.com/20191130/197b935d353b087fe6210df269f556bc.jpg)(https://uploads.tapatalk-cdn.com/20191130/b2812bc83519cb181c2b2da0a5a499b3.jpg)(https://uploads.tapatalk-cdn.com/20191130/051fe136a2e333bda4426d4233a48759.jpg)(https://uploads.tapatalk-cdn.com/20191130/47c5154e12855031948fc090f08f4f5a.jpg)
Sent from my BLA-L09 using Tapatalk
Oh boy that is nice! :cheers:
-
Oh boy that is nice! :cheers:
:iagree: :drool: :drool: :drool: :dd: 8) :like:
-
Just got a T-4 knife wednsday, initial impressions not much different than the blabber on you tube. blade is a bit small compared to a Crater, drivers equal or better than a Crater. Bit chunkier, about the size of a vic ranger with way less tools. Cost was about $10 too high. As far as a practical EDC tool i have used the screwdrivers and the file already at work to mount a security scan point, move a bit of wood to level the plastic mount etc. So it looks like a good EDC for me, but its no Victorinox thats for sure.(40 plus years of carrying vics) I will pair it with a Wave/Charge for 30 days and re-evaluate. Fit and finish reminiscent of the side kick/wing man and the whole thing is also like a clone of the modded sidekicks using one handle. Pocket clip is good for me as well. Would like to see a T-5 that has 2 blades and loose the file, one serrated sheeps foot and the other plain edged. Also as a price comparison point you can get a Rebar for 69$ and T-4 is 59$. Blades are about the same size. Still glad i bought it though. Am already saving junk food change for the P-4.
-
Received this morning Leatherman Charge TTI (+). Medium size MT clamp, rather tapered beak, smaller than the Surge but much lighter too. The advantage of this clamp is mainly the "titanium" thus lightening the weight of the tool, and the blade in S30V ( cutting edge that holds well, but sharpening the blow more difficult). The clamp comes with bits, a removable belt clip, a grommet, and a nylon case. All tools are lockable. It is generally beautiful material .
(https://live.staticflickr.com/65535/49151869922_93773e3a8e_c.jpg)(https://live.staticflickr.com/65535/49151630636_1c358403b1_c.jpg)
-
Congrats on your Charge ! :like: :tu:
-
Nice tools guys :like: :tu:
-
Received this morning Leatherman Charge TTI (+). Medium size MT clamp, rather tapered beak, smaller than the Surge but much lighter too. The advantage of this clamp is mainly the "titanium" thus lightening the weight of the tool, and the blade in S30V ( cutting edge that holds well, but sharpening the blow more difficult). The clamp comes with bits, a removable belt clip, a grommet, and a nylon case. All tools are lockable. It is generally beautiful material .
(https://live.staticflickr.com/65535/49151869922_93773e3a8e_c.jpg)(https://live.staticflickr.com/65535/49151630636_1c358403b1_c.jpg)
Nice looking Charge! :like:
-
Congrats on the T4, stu :cheers: and sweet looking Charge Regis :drool: :like:
-
Received this morning Leatherman Charge TTI (+). Medium size MT clamp, rather tapered beak, smaller than the Surge but much lighter too. The advantage of this clamp is mainly the "titanium" thus lightening the weight of the tool, and the blade in S30V ( cutting edge that holds well, but sharpening the blow more difficult). The clamp comes with bits, a removable belt clip, a grommet, and a nylon case. All tools are lockable. It is generally beautiful material .
(https://live.staticflickr.com/65535/49151869922_93773e3a8e_c.jpg)(https://live.staticflickr.com/65535/49151630636_1c358403b1_c.jpg)
Wow very nice charge :drool: :drool: :drool: :tu:
-
Received these 2 today...
Must say I think I just found one of my favourite LM's, G10 Charge.(https://uploads.tapatalk-cdn.com/20191206/b20e9c5d48b40a253349c63bb6fadaa4.jpg)(https://uploads.tapatalk-cdn.com/20191206/e29b16657698294540a03113a06b137c.jpg)(https://uploads.tapatalk-cdn.com/20191206/c2ea9cbe94d1bdcf13e8f1353eb9dc61.jpg)(https://uploads.tapatalk-cdn.com/20191206/614d02ecd43c6dd801929e5fa8391fcb.jpg)(https://uploads.tapatalk-cdn.com/20191206/568eec389ae79e0b541810d2204f6f68.jpg)(https://uploads.tapatalk-cdn.com/20191206/7a2abc484461895478a988c5df0f6a92.jpg)(https://uploads.tapatalk-cdn.com/20191206/e477abfd757e9505c6e6f9997f03186a.jpg)(https://uploads.tapatalk-cdn.com/20191206/0a3ca48bc56c18e2c8fdad95a2b96779.jpg)(https://uploads.tapatalk-cdn.com/20191206/fd41f61aeed8c23ae9657b68e9769df3.jpg)
Sent from my BLA-L09 using Tapatalk
-
Supertool 300.(https://uploads.tapatalk-cdn.com/20191206/8d62f06b07f7b9dcc4c558df3b9527f2.jpg)(https://uploads.tapatalk-cdn.com/20191206/60373c61ec1f93dd1dc3e4680a7f5ea1.jpg)(https://uploads.tapatalk-cdn.com/20191206/3e7405dbf93f9c47af392221c9467b95.jpg)(https://uploads.tapatalk-cdn.com/20191206/11102445756f1c9e112e9424ade6659d.jpg)
Sent from my BLA-L09 using Tapatalk
-
Nice MTs Hood :like: :tu:
-
Received these 2 today...
Must say I think I just found one of my favourite LM's, G10 Charge.(https://uploads.tapatalk-cdn.com/20191206/b20e9c5d48b40a253349c63bb6fadaa4.jpg)(https://uploads.tapatalk-cdn.com/20191206/e29b16657698294540a03113a06b137c.jpg)(https://uploads.tapatalk-cdn.com/20191206/c2ea9cbe94d1bdcf13e8f1353eb9dc61.jpg)(https://uploads.tapatalk-cdn.com/20191206/614d02ecd43c6dd801929e5fa8391fcb.jpg)(https://uploads.tapatalk-cdn.com/20191206/568eec389ae79e0b541810d2204f6f68.jpg)(https://uploads.tapatalk-cdn.com/20191206/7a2abc484461895478a988c5df0f6a92.jpg)(https://uploads.tapatalk-cdn.com/20191206/e477abfd757e9505c6e6f9997f03186a.jpg)(https://uploads.tapatalk-cdn.com/20191206/0a3ca48bc56c18e2c8fdad95a2b96779.jpg)(https://uploads.tapatalk-cdn.com/20191206/fd41f61aeed8c23ae9657b68e9769df3.jpg)
Sent from my BLA-L09 using Tapatalk
Oh boy that is nice! Very nice! :cheers:
-
Supertool 300.(https://uploads.tapatalk-cdn.com/20191206/8d62f06b07f7b9dcc4c558df3b9527f2.jpg)(https://uploads.tapatalk-cdn.com/20191206/60373c61ec1f93dd1dc3e4680a7f5ea1.jpg)(https://uploads.tapatalk-cdn.com/20191206/3e7405dbf93f9c47af392221c9467b95.jpg)(https://uploads.tapatalk-cdn.com/20191206/11102445756f1c9e112e9424ade6659d.jpg)
Sent from my BLA-L09 using Tapatalk
Another nice one...and between the two...wow...the Charge because those G10’s just call to me. :cheers:
-
2 very excellent tools, Hood :salute: :like:
-
:iagree: congrats !
-
That orange Charge is sweet. Congrats.
-
:drool: :drool: :drool: :iagree: :drool: :drool: :drool:
-
Green Micra
Red Leap
LM 1,3,5,7,8
Grind
Then I got some spare parts. 2x Surge file/saw replacement, 2x wire cutter replacement (1 in black, 1 in SS)
Im happy!
-
Nice ones BM :like: :tu:
And I like your new avatar :D
-
:iagree: Nice haul, BM :like:
-
009 of 500
(https://content-22.foto.my.mail.ru/mail/wowaboro/258/b-788.JPG) (https://content-22.foto.my.mail.ru/mail/wowaboro/258/b-788.JPG)
-
Very nice :like: :tu:
-
:iagree: congrats on that one, wow :like:
-
009 of 500
(https://content-22.foto.my.mail.ru/mail/wowaboro/258/b-788.JPG) (https://content-22.foto.my.mail.ru/mail/wowaboro/258/b-788.JPG)
Sweet! :cheers:
-
(https://uploads.tapatalk-cdn.com/20191219/a6cb670baf797ac9a319c7f2155eced1.jpg)
Store has several brand new XE6s and CS4s
-
Nice :like: :tu:
-
Nice CS4. I do like the XE6 sissors a lot. :tu:
-
Great find, G-Dizz 8) :like:
-
Well I must say...I got to open my Leatherman package finally!
These little pocket tools are pretty sweet. I previously ordered 1 3 5 7 8...so this order has...
2,4,6,9,10
Croc
Rail
Pump
Grind
Micra-Pink
Pocket clips for Surge (will still ride in sheaths most likely)
The 4, rail and pump have similar features. has a removable or 3 tools.
And BTW, the Croc is a monster. Not a small thing like 1-10. About the size of the Grind/Pump/Rail.
LM did good :tu:
-
Nice one :like: :tu:
-
Great use :like: :tu:
-
Hello day20.
Nutcracker of a day today.
Hard job made easy. :cheers:
:rofl:
:cheers: And tasty!
-
Well, it had to happen...P2 for Christmas!
I have been critical of Free on the forum, mostly the initial LM marketing (grey sheath, better than Wave, etc.), but I must admit that it’s not a bad product, and I must commend LM for trying something new with some quite advanced technical features such as the magnetic retainment and plier head locking systems.
Sure, it has a 2D Phillips, the awl should have a pointed tip, a one inch rule is a little pointless and they could have put a metal saw on the file, even though it’s very short. But there are some nice details like the scraper on the large flat, the wire stripper on the medium flat, the machined thumb rest on the scissors and the wire cutters that are like mini shears.
I may try a little EDC in Jan after the PST challenge is over.
-
Nice one Max :like: :tu:
-
It'll be nice to hear your thoughts once you spend some time with it Max.
-
@BadMechanic, Those by the numbers LM put out are neat. Collecting the whole set is not terrible pricey either. I like the #4 and its whats on my keychain.
-
(https://uploads.tapatalk-cdn.com/20191219/a6cb670baf797ac9a319c7f2155eced1.jpg)
Store has several brand new XE6s and CS4s
If you see those purple XE6, grab them. Those are collectible on the Bay.
-
Xmas present from the wife...
(https://uploads.tapatalk-cdn.com/20191225/a97f668f298e65a9a1492ea8d3476133.jpg)(https://uploads.tapatalk-cdn.com/20191225/a0c4b1954e96b2350f2532ded7ecf569.jpg)(https://uploads.tapatalk-cdn.com/20191225/5ea8279bbd241c97b9be89b2cd87550d.jpg)(https://uploads.tapatalk-cdn.com/20191225/94f1543a97dbfc4499011239f0c84b89.jpg)
Sent from my BLA-L09 using Tapatalk
-
From me, to me for Xmas.
1998 LM Mini Tool with Original Pouch.
Basically brand new, previous owner bought it 15 year's ago and never used it.
(https://uploads.tapatalk-cdn.com/20191225/bc5625993fb4acadcd7b0343117c3849.jpg)(https://uploads.tapatalk-cdn.com/20191225/31ddf8542d9c7428d962d06144a739b3.jpg)(https://uploads.tapatalk-cdn.com/20191225/16cf7cc50be3d6bcb6a9d1d6892d0db5.jpg)(https://uploads.tapatalk-cdn.com/20191225/3efcc05fd6b5bce25952a69eea73c754.jpg)(https://uploads.tapatalk-cdn.com/20191225/a047b0fef633eac913590b701bf02eb0.jpg)(https://uploads.tapatalk-cdn.com/20191225/35685f50f1f58990d0637c1d6985379d.jpg)(https://uploads.tapatalk-cdn.com/20191225/77ac0c0240b404b5e9ca541fdae3955d.jpg)(https://uploads.tapatalk-cdn.com/20191225/f02fc19561aa74aed902050e94076b19.jpg)(https://uploads.tapatalk-cdn.com/20191225/be8b2ad2fd765fdf6e841e95f6c66277.jpg)
Sent from my BLA-L09 using Tapatalk
-
It'll be nice to hear your thoughts once you spend some time with it Max.
Thanks Wim, Aloha. Will certainly give more detailed feedback in Jan. :hatsoff:
-
From me, to me for Xmas.
1998 LM Mini Tool with Original Pouch.
Basically brand new, previous owner bought it 15 year's ago and never used it.
(https://uploads.tapatalk-cdn.com/20191225/bc5625993fb4acadcd7b0343117c3849.jpg)(https://uploads.tapatalk-cdn.com/20191225/31ddf8542d9c7428d962d06144a739b3.jpg)(https://uploads.tapatalk-cdn.com/20191225/16cf7cc50be3d6bcb6a9d1d6892d0db5.jpg)(https://uploads.tapatalk-cdn.com/20191225/3efcc05fd6b5bce25952a69eea73c754.jpg)(https://uploads.tapatalk-cdn.com/20191225/a047b0fef633eac913590b701bf02eb0.jpg)(https://uploads.tapatalk-cdn.com/20191225/35685f50f1f58990d0637c1d6985379d.jpg)(https://uploads.tapatalk-cdn.com/20191225/77ac0c0240b404b5e9ca541fdae3955d.jpg)(https://uploads.tapatalk-cdn.com/20191225/f02fc19561aa74aed902050e94076b19.jpg)(https://uploads.tapatalk-cdn.com/20191225/be8b2ad2fd765fdf6e841e95f6c66277.jpg)
Sent from my BLA-L09 using Tapatalk
Congrats Hood. :like:
I’m sure you looked far and wide for that one. :tu:
-
Hi Max, thanx...
This wasn't an easy find, but worth every cent.Congrats Hood. :like:
I’m sure you looked far and wide for that one. :tu:
Sent from my BLA-L09 using Tapatalk
-
Nice ones Hood :like: :tu:
-
Thanx Wspeed..!!
Nice ones Hood :like: :tu:
Sent from my BLA-L09 using Tapatalk
-
Well, it had to happen...P2 for Christmas!
I have been critical of Free on the forum, mostly the initial LM marketing (grey sheath, better than Wave, etc.), but I must admit that it’s not a bad product, and I must commend LM for trying something new with some quite advanced technical features such as the magnetic retainment and plier head locking systems.
Sure, it has a 2D Phillips, the awl should have a pointed tip, a one inch rule is a little pointless and they could have put a metal saw on the file, even though it’s very short. But there are some nice details like the scraper on the large flat, the wire stripper on the medium flat, the machined thumb rest on the scissors and the wire cutters that are like mini shears.
I may try a little EDC in Jan after the PST challenge is over.
Nice :tu:
-
Xmas present from the wife...
(https://uploads.tapatalk-cdn.com/20191225/a97f668f298e65a9a1492ea8d3476133.jpg)(https://uploads.tapatalk-cdn.com/20191225/a0c4b1954e96b2350f2532ded7ecf569.jpg)(https://uploads.tapatalk-cdn.com/20191225/5ea8279bbd241c97b9be89b2cd87550d.jpg)(https://uploads.tapatalk-cdn.com/20191225/94f1543a97dbfc4499011239f0c84b89.jpg)
Sent from my BLA-L09 using Tapatalk
Nice :cheers:
-
From me, to me for Xmas.
1998 LM Mini Tool with Original Pouch.
Basically brand new, previous owner bought it 15 year's ago and never used it.
Sent from my BLA-L09 using Tapatalk
That is a cool one! :cheers:
-
From me, to me for Xmas.
1998 LM Mini Tool with Original Pouch.
Basically brand new, previous owner bought it 15 year's ago and never used it.
(https://uploads.tapatalk-cdn.com/20191225/bc5625993fb4acadcd7b0343117c3849.jpg)(https://uploads.tapatalk-cdn.com/20191225/31ddf8542d9c7428d962d06144a739b3.jpg)(https://uploads.tapatalk-cdn.com/20191225/16cf7cc50be3d6bcb6a9d1d6892d0db5.jpg)(https://uploads.tapatalk-cdn.com/20191225/3efcc05fd6b5bce25952a69eea73c754.jpg)(https://uploads.tapatalk-cdn.com/20191225/a047b0fef633eac913590b701bf02eb0.jpg)(https://uploads.tapatalk-cdn.com/20191225/35685f50f1f58990d0637c1d6985379d.jpg)(https://uploads.tapatalk-cdn.com/20191225/77ac0c0240b404b5e9ca541fdae3955d.jpg)(https://uploads.tapatalk-cdn.com/20191225/f02fc19561aa74aed902050e94076b19.jpg)(https://uploads.tapatalk-cdn.com/20191225/be8b2ad2fd765fdf6e841e95f6c66277.jpg)
Sent from my BLA-L09 using Tapatalk
That's a nice MINI :drool: :tu: :like:
-
The xmas present from my girlfriend , a LM SIGNAL :hatsoff:
-
The xmas present from my girlfriend , a LM SIGNAL :hatsoff:
Congrats, that looks great..!!
Sent from my BLA-L09 using Tapatalk
-
Congrats, that looks great..!!
Sent from my BLA-L09 using Tapatalk
Thanks :cheers:
-
Some really great stuff gotten :dd: :like:
-
:tu: :cheers: :iagree:
-
:iagree: :cheers:
-
My first Leatherman
A Rebar with a Bit Kit, first impressions are through the roof :woohoo:
-
Nice LMs Ivo and GJ :like:
-
My first Leatherman
A Rebar with a Bit Kit, first impressions are through the roof :woohoo:
Very nice :hatsoff: :tu: :like:
-
Thanks Was and Ivo :cheers:
-
Some great new gets fellas ! :like: :cheers: :tu:
-
Big congrats, Greg :woohoo: a great LM to start with for sure and the bit kit makes it even better :like:
-
My first Leatherman
A Rebar with a Bit Kit, first impressions are through the roof :woohoo:
Very nice! :woohoo:
-
Thanks folks :cheers:
I don't think I'll have to upgrade anytime soon if at all :multi:
-
Thanks folks :cheers:
I don't think I'll have to upgrade anytime soon if at all :multi:
Maybe not! But, you may want a BO model, and/or, a Coyote Brown?
Now fix something for the Mrs J, so she knows she did good and will not sneak this one away until a birthday or Father’s Day.
Sent from my iPhone using Tapatalk
-
My first Leatherman
A Rebar with a Bit Kit, first impressions are through the roof :woohoo:
Congrats Greg :like:
The Rebar is one serious enabler :tu:
-
Maybe not! But, you may want a BO model, and/or, a Coyote Brown?
Now fix something for the Mrs J, so she knows she did good and will not sneak this one away until a birthday or Father’s Day.
Sent from my iPhone using Tapatalk
:rofl:
I have to say the Coyote Brown does catch my eye, not right away, but maybe in another model
-
Congrats Greg :like:
The Rebar is one serious enabler :tu:
Thanks
:facepalm:
-
A new Micra just bumped the Classic off the keyring
-
A new Micra just bumped the Classic off the keyring
That is a great looking set up! :like: :cheers:
-
Great tool GJ :like: :tu:
-
A new Micra just bumped the Classic off the keyring
:rofl: :like:
-
1st Mail call for 2020... BO Wave+(https://uploads.tapatalk-cdn.com/20200102/c308a6accbb8de94d58b356096c7d817.jpg)
Sent from my Huawei Mate 10 Pro using Tapatalk.
-
Great way to start the year :o :like:
-
Nice one Hood :like: :tu:
-
1st Mail call for 2020... BO Wave+(https://uploads.tapatalk-cdn.com/20200102/c308a6accbb8de94d58b356096c7d817.jpg)
Sent from my Huawei Mate 10 Pro using Tapatalk.
Nice BO :like: :cheers:
-
A very nice WAVE :like: :hatsoff:
-
Just received a new SIGNAL DMAX :hatsoff:
-
Nice one Ivo :like: :tu:
-
Thanks Wspeed :cheers:
-
Just received a new SIGNAL DMAX :hatsoff:
Great MT...my son is loving his Signal
-
Thanks RR :cheers:
-
Not a MT, but a Leatherman E300...
(https://uploads.tapatalk-cdn.com/20200118/2a40d75d740ee8edf8e356b0d494f174.jpg)
Sent from my BLA-L09 using Tapatalk
-
:like: :tu:
-
:iagree:
I was looking at the retired section of Leatherman website and they have made some great stuff! :cheers:
-
The $20 gun show Charge XTi, so very stoked about this one.
-
Nice LMs Hood and TLW :like: :tu:
-
The $20 gun show Charge XTi, so very stoked about this one.
That is grand theft “Multi-Tool”
-
The $20 gun show Charge XTi, so very stoked about this one.
As would I - great score! :cheers:
-
That is grand theft “Multi-Tool”
:iagree:
Any sirens behind you! My next question would have been if he had any more...you know for brothers and sisters! :cheers:
-
The $20 gun show Charge XTi, so very stoked about this one.
Nice score!
-
The $20 gun show Charge XTi, so very stoked about this one.
(https://media0.giphy.com/media/IqGuAcvSHiK8U/giphy.gif?cid=19f5b51a6fa1fc6f41285104c41eb28475b7b04f82662895&rid=giphy.gif)
-
Delivered today...
0995 Supertool with Pouch.
(https://uploads.tapatalk-cdn.com/20200124/1c31c726e302a2e10af6b1e2950619e4.jpg)(https://uploads.tapatalk-cdn.com/20200124/f5187fca295f6666845b0d71ea53cd41.jpg)(https://uploads.tapatalk-cdn.com/20200124/3eb2538693273ef5fc58a358ec082f95.jpg)
Sent from my BLA-L09 using Tapatalk
-
Nice one Hood it looks brand new :like: :tu:
-
Nice one Hood it looks brand new :like: :tu:
Thanx Wspeed, its got a few marks on it but otherwise tools are all in great condition.
Sent from my BLA-L09 using Tapatalk
-
Very nice Super Tool :like: :cheers:
-
:iagree: :like: :tu:
-
Supertool is always a good choice.
-
:iagree: One of my favorite classic MTs :like:
-
My first LM was an ST and I still like it :tu:
-
Nice one Ivo :like: :tu:
-
The new guy in my pocket for EDC. Not sure about the single grind on the knife, but it's not something that can't be fixed and that's really not the main reason why I got this tool in first place >:D
(https://www.upload.ee/image/11036274/IMG_4994.JPG)
-
Nice tool :like: :tu:
-
ES4...good choice! :tu:
-
The new guy in my pocket for EDC. Not sure about the single grind on the knife, but it's not something that can't be fixed and that's really not the main reason why I got this tool in first place >:D
(https://www.upload.ee/image/11036274/IMG_4994.JPG)
Nice Squirt :cheers:
-
Really happy with it so far!
Thanks for the kind words :hatsoff:
-
Snapped up these two for a really great deal. My second Ti and second Crunch. :salute:
Both unused, needing a good clean and oiling and then good for deployment! :tu:
-
Nice ones Max :like: :tu:
-
Snapped up these two for a really great deal. My second Ti and second Crunch. :salute:
Both unused, needing a good clean and oiling and then good for deployment! :tu:
Two very good carries! :like: :cheers:
-
Thanks Wim, Rapidray :hatsoff:
-
A little gift to myself. :cheers:
-
Latest and surely not the last...
Charge AL.
(https://uploads.tapatalk-cdn.com/20200202/7abada07a767a3ba37e8be1172f52fbf.jpg)
Sent from my BLA-L09 using Tapatalk
-
Nice LMs Max and Hood :like: :tu:
-
Thanks Wim, looking good H3 :hatsoff:
-
Snapped up these two for a really great deal. My second Ti and second Crunch. :salute:
Both unused, needing a good clean and oiling and then good for deployment! :tu:
Very nice Max :drool: :drool: :drool: :like:
-
A little gift to myself. :cheers:
:drool: :drool: :drool: need that to :drool: :drool: :drool:
-
Latest and surely not the last...
Charge AL.
(https://uploads.tapatalk-cdn.com/20200202/7abada07a767a3ba37e8be1172f52fbf.jpg)
Sent from my BLA-L09 using Tapatalk
Ooh like that very much :drool: :drool: :tu: I still have no CHARGE :ahhh
-
Thanks Ivo :hatsoff:
-
You guys look what my wife got me for my birthday!!! I’m so excited :woohoo: :woohoo: :cheers: :like:
-
Great tool and pic :like: enjoy your day! :cheers:
-
Congratulations Andy :cheers: :like:
-
A little gift to myself. :cheers:
Great photos :like: :cheers:
-
Latest and surely not the last...
Charge AL.
(https://uploads.tapatalk-cdn.com/20200202/7abada07a767a3ba37e8be1172f52fbf.jpg)
Sent from my BLA-L09 using Tapatalk
Great kit :like: :cheers:
-
You guys look what my wife got me for my birthday!!! I’m so excited :woohoo: :woohoo: :cheers: :like:
Well Happy Birthday! Great gift :cheers:
-
She got a sister, Andy? :climber:
-
:rofl: :rofl:
-
She got a sister, Andy? :climber:
:rofl:
-
Some nice new gets fellas ! :like: :tu:
-
No need for another Leather. The Wave Plus covers all the bases. A "black-out" version would be neat though.
(https://i.imgur.com/5AEMqDgh.jpg)
-
No need for another Leather. The Wave Plus covers all the bases. A "black-out" version would be neat though.
(https://i.imgur.com/5AEMqDgh.jpg)
The BO are very nice! :cheers: :tu:
-
:iagree: :like: :tu:
-
A mystery sheath...
I’m sure to get lots of suggestions on this one, snuff pouch, coin dispenser, broken Gerber bits holder... :facepalm:
Has the old logo and branding “Leatherman Tool Group, Inc”. Was thinking the tool adapter, but that came in a hard belt case. Too large for the MiniTool or Micra. Predates Juice/Squirt. Maybe some kind of combination of tools?
So let’s see who’s first to give a credible answer, but will accept other use submissions too. :pok:
-
If the Tool Adapter fits then I will venture it is just another option of sheath for it :salute: Very cool looking sheath BTW :o :like:
-
:iagree: :like: :cheers:
-
Yep, tool adapter case.
-
Well this seems odd...a pouch for a case? It does fit if I remove the belt clip. Can’t put the goodies in loose, as you’ll lose the bits. Maybe it’s a bit more secure? :dunno:
Anyways, one of LM’s more obscure pouches. May end up getting used for something else... :think:
-
Not for one but two Mini Tools? :ahhh
-
:iagree: :dd:
:rofl:
Seriously though, I think :think: that there may be a variation that isn't a case but holds the adapter and the bits that would fit in the pouch :think: Or at least seems like I remember seeing something like that sometime or another :shrug:
-
Of course if the case fits it then it may just be the sheath for it the way you have it :D
-
I think it’s still a mystery... :dunno:
-
Email Leatherman? :dunno:
-
Good idea. Have sent, so let’s see... :popcorn:
-
From another seller, picked up this late ‘99 PST-II today. :woohoo:
Advertised as ‘hardly used’, and when I met the seller, he said it’s been in his cupboard, forgotten and unused since he bought it. Not a scratch and as clean and shiny as the day it came out of Portland.
Dang...I’m so pleased it’s mint, but I was expecting a user. Now this one has to get put on the shelf. Not that I’m complaining; the PST-II is one of my favorites.
And this gives me an excuse to look for another... :facepalm:
-
Sweet and 20 years old :like: :cheers:
-
:iagree: Nice one, Max :like:
-
Thanks guys :hatsoff:
-
Nice tools Max :like: :tu:
-
Thx Wim :hatsoff:
-
:2tu:
-
I think it’s still a mystery... :dunno:
Nothing mysterious.
It's just sheath for tool adapter and bits. In plastic case without clip.
Comes leather or nylon variant.
(https://content-28.foto.my.mail.ru/mail/wowaboro/264/b-819.jpg) (https://content-28.foto.my.mail.ru/mail/wowaboro/264/b-819.jpg)
Better tell us where you bought it.
I need one for my collection ;)
-
Thank you wowaboro :salute: mystery confirmed as solved!
Seller only had the pouch and had no idea what tool it was for...
-
Cool :like: :cheers:
-
Email Leatherman? :dunno:
From Leatherman today:
“Thank you for contacting Leatherman Tool Group.
That is an old sheath that held the bits for our tools. There was a bit kit that came with it, but we are no longer selling those and have upgraded to the latest version of our bits.”
So this confirms wowaboro‘s post. And good of Leatherman to reply to this obscure request. :salute:
-
:tu:
-
A new for me OG Wave. :woohoo:
#3 to join my 20th Anni and ‘user’ :salute:
These early Waves tick my box :tu:
-
Nice OG Wave Max :like: :tu:
-
:hatsoff:
-
:2tu:
-
Nice one Max ! :like: :cheers:
-
Looking great Max. Nice find :like:
-
Very nice :dd: :drool: You make me want to get my old Wave out and carry it :D I need to get all my tools out and go through them and rotate through some of them and the OG Wave needs to be on that list for sure :salute: :tu:
-
Thanks all :hatsoff:
Your OG Wave is calling you Poncho :cheers:
-
Very nice :dd: :drool: You make me want to get my old Wave out and carry it :D I need to get all my tools out and go through them and rotate through some of them and the OG Wave needs to be on that list for sure :salute: :tu:
Yes you do :pok:
-
Very nice :dd: :drool: You make me want to get my old Wave out and carry it :D I need to get all my tools out and go through them and rotate through some of them and the OG Wave needs to be on that list for sure :salute: :tu:
:pok:. I'm boring and carry the same ole same so I'll live vicariously thru you :popcorn:
-
T4
-
Looking good Raoul :like: :tu:
-
I found my very first PST yesterday!
-
Nice one Rapidray :like: :tu:
-
...and probably not your last :facepalm:
-
Congrats Ray ! :cheers:
-
A new for me ‘03 PST I found online at a good price. Had been in my watch list for some weeks, and seller dropped the price twice before I bit. :woohoo:
Hardly used but a few rust spots needed taking care of. Cleaned up nicely and will definitely be a user. :cheers:
I do like PSTs... :tu:
-
Nice score ! :like:
-
:iagree: :like: :tu:
-
That is (http://i.imgur.com/cJQF3TS.png) (http://imgur.com/cJQF3TS)
-
Thanks guys. :hatsoff:
-
I didn’t buy Leatherman for a while but couldn’t resist this time ;)(https://uploads.tapatalk-cdn.com/20200310/1e9af837ba0402b6a7fc50d947ff6bc4.jpg)
-
Great find jnoxyd :like: :tu:
-
I don't think I could have passed that one up either :ahhh :ahhh :ahhh
So nice :dd: :drool: :like: :like:
-
I didn’t buy Leatherman for a while but couldn’t resist this time ;)(https://uploads.tapatalk-cdn.com/20200310/1e9af837ba0402b6a7fc50d947ff6bc4.jpg)
Sweet score ! :drool:
-
I didn’t buy Leatherman for a while but couldn’t resist this time ;)(https://uploads.tapatalk-cdn.com/20200310/1e9af837ba0402b6a7fc50d947ff6bc4.jpg)
Awesome! Who could resist that temptation? :like:
-
I didn’t buy Leatherman for a while but couldn’t resist this time ;)(https://uploads.tapatalk-cdn.com/20200310/1e9af837ba0402b6a7fc50d947ff6bc4.jpg)
That's a nice very early PST :salute: :think: :hatsoff:
Does it have solid or "hollow" screws on the backside ? The really early ones were "hollow", later ones were solid.
-
Congrats . :like:
-
That's a nice very early PST :salute: :think: :hatsoff:
Does it have solid or "hollow" screws on the backside ? The really early ones were "hollow", later ones were solid.
Hi Gregozedobe! It has solid backside rivets, Leatherman USA on pliers head and no blade etching to my regret. Not very very early one but Cabela's nevertheless ;)
(https://uploads.tapatalk-cdn.com/20200312/dec28994a8b1c3aef4801831666e481f.jpg)
-
Hi Gregozedobe! It has solid backside rivets, Leatherman USA on pliers head and no blade etching to my regret. Not very very early one but Cabela's nevertheless ;)
Still a very nice early Cabela's PST. The ones with etching on the blade are even rarer ( I think they might have been from the original production run, certainly they are very old)
-
Got myself a really good condition Pulse.
(https://uploads.tapatalk-cdn.com/20200318/e15c395cc4d9c6f6afc8fe0bde27a74e.jpg)
Sent from my BLA-L09 using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200318/53e4d85e69b1a52337723ed73b0b8bcf.jpg)
Jeff
-
Got myself a really good condition Pulse.
(https://uploads.tapatalk-cdn.com/20200318/e15c395cc4d9c6f6afc8fe0bde27a74e.jpg)
Sent from my BLA-L09 using Tapatalk
Nice score ! and locks up !!!! :like: :tu:
-
Nice Leatherman tools Hood and jds :like: :tu:
-
Nice Leatherman tools Hood and jds :like: :tu:
:dd: :iagree: :like: :like:
-
Got myself a really good condition Pulse.
(https://uploads.tapatalk-cdn.com/20200318/e15c395cc4d9c6f6afc8fe0bde27a74e.jpg)
Sent from my BLA-L09 using Tapatalk
Congrats Hooded :dd:
-
(https://uploads.tapatalk-cdn.com/20200318/53e4d85e69b1a52337723ed73b0b8bcf.jpg)
Jeff
Nice one Jeff, hope you'll like it :tu:
-
Thanx guys...!!
Sent from my BLA-L09 using Tapatalk
-
Hello forum. Long time reader, first time poster.
Retired my wave last week and put the Free P2 into my EDC. Picked up the thumb tabs for the knife from ZapWizard.
Years ago I added a Nite Ize hip clip to the front of the Leatherman bit card. Foregoing the Leatherman Piranha traditional bit, I’m able to attach it to the back of the Leatherman Bit Card with some 3M double sided tape. The tape holds it secure while allowing me to remove the Piranha easily enough (able to remove and put back several times before the tape loses its grip, but thinking of switching to some small neodymium magnets).
Those curious, that’s the Leatherman E55Bx knife. Absolutely love it; favorite knife I’ve ever owned. Terrified of the day I misplace it or other and have to switch to something else.
I’ve stopped carrying my Hatori mini flashlight and instead I’ve been carrying my AirPods Pro and Leatherman Bit extender with Loggerhead ‘ratchet’ adapter in my jeans coin pocket.
I may go back to carrying my Hatori at some point. 5.11 started making comfortable jeans with hip pockets and added belt loops and am just waiting for the right balance in my bank account to make that purchase.
Let me know what you guys think!
-
Hi Mcfal and welcome to :MTO: :cheers:
Nice selection of tools of yours :like: :tu:
-
Thanks Wspeed. A mix of something old and new is always exciting
-
It sure is :tu: :cheers:
-
Great looking carry and welcome to :MTO: Mcfal :cheers:
-
:iagree: :tu:
Hello and welcome ! :cheers:
Maybe time to start looking on ebay for a backup for your knife ;)
-
:iagree: :tu:
Hello and welcome ! :cheers:
Maybe time to start looking on ebay for a backup for your knife ;)
:iagree: :like:
-
Just in from Nitram:
(https://i.imgur.com/lsGBlpr.jpg)
I'm now part of the official :ahhh :ahhh :ahhh MINI!!! :ahhh :ahhh :ahhh club 8)
... Again :facepalm:
-
Nice one Mechanickal :like: :tu:
-
Just in from Nitram:
(https://i.imgur.com/lsGBlpr.jpg)
I'm now part of the official :ahhh :ahhh :ahhh MINI!!! :ahhh :ahhh :ahhh club 8)
... Again :facepalm:
Sweet :tu:
-
Very nice and Congrats :tu:.
-
Just in from Nitram:
(https://i.imgur.com/lsGBlpr.jpg)
I'm now part of the official :ahhh :ahhh :ahhh MINI!!! :ahhh :ahhh :ahhh club 8)
... Again :facepalm:
:woohoo: congrats and don't forget Minitool Mondays :cheers:
-
Just in from Nitram:
Have fun with it! :cheers:
-
Well i just picked up these 2 Waves.
(https://uploads.tapatalk-cdn.com/20200408/fc222d8367444820d56176bccfc15c58.jpg)
Only Tools Matters
-
Nice ones Antti
Like the look of those sheaths :like: :tu:
-
Those sheat was 1 of good reasons to buy these. I paid 35€/pcs for these
Only Tools Matters
-
That is a good price :tu: :like:
-
Nice score, those sheaths alone are worth almost as much. :cheers:
-
Just in from Nitram:
(https://i.imgur.com/lsGBlpr.jpg)
I'm now part of the official :ahhh :ahhh :ahhh MINI!!! :ahhh :ahhh :ahhh club 8)
... Again :facepalm:
:woohoo:
... congrats Nick :tu:
-
Well i just picked up these 2 Waves.
(https://uploads.tapatalk-cdn.com/20200408/fc222d8367444820d56176bccfc15c58.jpg)
Only Tools Matters
Oh... those are nice AL :like:
-
Just in from Nitram:
(https://i.imgur.com/lsGBlpr.jpg)
I'm now part of the official :ahhh :ahhh :ahhh MINI!!! :ahhh :ahhh :ahhh club 8)
... Again :facepalm:
Nice score Mech and welcome back to club
Only Tools Matters
-
Oh... those are nice AL :like:
Nice score, those sheaths alone are worth almost as much. :cheers:
That is a good price :tu: :like:
Thanks, gotta try that worn out sheat cause those seems pretty awesome and feels sturdy
Only Tools Matters
-
A thank you from me too peeps :D
-
Thanks Poncho and Steve.
Steve, all over it. Have Had a search flagged into eBay to alert me to new posts for almost 6 months. Def a great suggestion!
-
Just got a p4 for $100 from Kiev of all places. Go figure.
(https://i.ibb.co/5T9tYKG/IMG-20200410-093135215.jpg) (https://ibb.co/D4bsGrz)
Man I love me some Leathermans.
-
I got these today :D
-
Just got a p4 for $100 from Kiev of all places. Go figure.
Nice!
-
Nice pickup Mechanickal. I’m jealous, just want them all!!
-
Nice tools guys :like: :tu:
-
A brand new Sideclip, with box and sheath! It's nice to have a backup for a tool, it allows me to carry and use one of my favourites without too much worry.
(https://i.imgur.com/s0UimH3.jpg)
-
Nice one nitram :like: :tu:
-
A brand new Sideclip, with box and sheath! It's nice to have a backup for a tool, it allows me to carry and use one of my favourites without too much worry.
(https://i.imgur.com/s0UimH3.jpg)
Sleek :tu:
-
Nice ones you two ! :like:
-
Nice score, those sheaths alone are worth almost as much. :cheers:
:iagree:
:salute:
-
:woohoo: Nitram!
By chance, where did you pick it up from?
-
I just pulled a Woodland Camo Charge + out of the box to start wiping down the Black Oxide and the tool fell apart on me. The set screws on the serrated blade side backed out and the thing fell apart. I’m beyond a huge LM fan, but these issues are becoming ridiculous.
-
:woohoo: Nitram!
By chance, where did you pick it up from?
From a friend, he got it from his local hardware store in the Netherlands. Every once in a while you can still find gems like that over here. Sometimes the asking price is way high, but sometimes they just want to move the ancient inventory.
-
I just pulled a Woodland Camo Charge + out of the box to start wiping down the Black Oxide and the tool fell apart on me. The set screws on the serrated blade side backed out and the thing fell apart. I’m beyond a huge LM fan, but these issues are becoming ridiculous.
Geez, that is terribly disappointing. Like you I am a big fan of Leatherman but you do have to wonder what they have been up to lately.
This is more than just the occasional unfortunate miss in quality control. Their average customer will only buy one, maybe two, of their product in a lifetime. If this is their experience that will end soon.
-
What is Leatherman doing :facepalm:
-
I just pulled a Woodland Camo Charge + out of the box to start wiping down the Black Oxide and the tool fell apart on me. The set screws on the serrated blade side backed out and the thing fell apart. I’m beyond a huge LM fan, but these issues are becoming ridiculous.
Oh man! That should never happen :-\
That moment must have been like...
(https://media.giphy.com/media/rjngVeIsMNL1e/giphy.gif)
-
What is Leatherman doing :facepalm:
Well, I was tired last night so I just looked at it again. When I grabbed it the set screw fell out of the tool. Does anyone know if it is supposed to have loctite on it? There is none. I could fix it myself, but I don’t want to mess the beautiful scales up and LM needs to be aware of this nonsense.
-
I have found some do and some haven’t got any loctite
I would see if you could email Leatherman about your one :tu:
-
I have found some do and some haven’t got any loctite
I would see if you could email Leatherman about your one :tu:
I will do that. I bought it from Blade HQ so I emailed them. Mainly because LM’s warranty department is shut down right now. I need to move fast, as this was a limited run.
-
Hopefully you will get a reply from them :tu:
-
Awesome find, nitram :drool: :like: and I hope you can get your Charge + sorted geneva :ahhh
-
(https://uploads.tapatalk-cdn.com/20200509/ad9ad853a813c1eaffe679246e91fa17.jpg)
Sent from my iPad using Tapatalk
-
They look nice in red :like: :tu:
-
Very nice, PPCAP :like:
-
I've got a package today which took over 2 month to deliver !
Something with... a saw :ahhh
An OG Supertool (0696) in near mint condition... apart from the rust caused by not removing that sticker :P
It's been 25 years since I have removed a sticker on a Supertool :D
Some small dark spots are left which is fine for me. It will be used anyways...
(https://i.imgur.com/gHdGr01.jpg)
(https://i.imgur.com/Z9u6zIl.jpg)
(https://i.imgur.com/1kzMsBm.jpg)
(https://i.imgur.com/jzdADtC.jpg)
(https://i.imgur.com/46V7OMw.jpg)
(https://i.imgur.com/IEga3Gd.jpg)
-
Nice one Matt :like: :tu:
-
Thanks Wim... took some patience to wait :hatsoff:
-
Congrats Matt ! :drool:
-
:cheers: Steve
-
Well, just arrived the newest member of my Leatherman family: a Knifeless Rebar!
To tell the truth ( and maybe because I'm spoiled by its larger sibling the ST300 and the Wave), I'm not in awe with first impressions.
It looks small ( but it's the same legth as my Wave), and kind of cheapish; the creases from the handle forming are visible, and I feel sharp edges all around the handles. The tools are somewhat stiff and, contrary to my-then-new Wave, ST, Revs, it appears to be bone dry; no sign of lube whatsoever (can anyone who had bought any brand new LTG tool confirm this, or is this just a one-case?). The locks rattle a bit side to side, and it's more pronounced on the phillips' side. This one came with the "angry bird" leather sheath; the description said it came with "standard sheath" so, I was expecting the nylon with snap sheath and was ready to do the "front pocket mod" as per Mc Stitchy; that's why I ordered the RBD together with it. Oh well, guess I'll buy one, and in tje meantime use my old, ratty-looking Wave nylon sheath (can I call it patina'ed!?!?). Maybe I'm just nitpicking, I don't know.
On the other hand and after reading about the many pliers stiffness complaints in different newer models, I squeezed hard on them handles and... no pliers stiffness after 5 attempts!!! Loving its lightness and the aggresiveness of the file (for the moment, to the touch). The fit for the RBD is perfect, and all handle markings (branding, rule scales) arecrisp and easily readable (unlike the ST's; chalk one up for the Rebar!). I'm really glad it does not have the in-vogue exagerated splay of newer tools, and that it is easily modifiable ( will look into a PE blade).
Anyway, I'm glad I got it, and I'll give it some carry time and see how it goes. Thanks for being such enablers and motivators! :tu:
-
Also, had anyone else's have the saw and file's nail nicks partially occluded by the handle/scale;
is this like the FPR Gerber or have I got a glitched one? :think:
:facepalm:
Never mind...just went through the Rebar club and it's because of the changed position of the file and saw blades, as they now reside where the bladed one have the SE/PE blades. :facepalm: :facepalm: :facepalm:
-
New to me Kick. Got the gunk cleaned off, derusted, lubed, and hit the blade with the fine stone and strop. All good now :tu:
-
Topo...
(https://i.ibb.co/R7nRBxL/IMG-0146.jpg)
-
Nice LMs everyone :like: :tu:
-
My latest tools bought...
SideClip, PST, Flair, Kick, Blast, BO ST300,
(https://uploads.tapatalk-cdn.com/20200524/4946646b7a601ba3eaf8f72cdd286714.jpg)(https://uploads.tapatalk-cdn.com/20200524/a5c564900fbf80a3dc33478fa7ae1bd6.jpg)(https://uploads.tapatalk-cdn.com/20200524/02e1cdaa4a35bea4cf9f2dc25e24a9de.jpg)(https://uploads.tapatalk-cdn.com/20200524/e8d7a1713f979616e32d523104ce262d.jpg)(https://uploads.tapatalk-cdn.com/20200524/b22fddc607152918360622afeb1d3a5f.jpg)(https://uploads.tapatalk-cdn.com/20200524/03948c3c6ceda273965e4d2505cf690d.jpg)
Sent from my SM-N975F using Tapatalk
-
Nice LMs Hood :like: :tu:
-
:iagree: :like: :tu:
-
Nice LMs everyone :like: :tu:
What Wim says :tu:
-
Happy Supertool Saturday everyone :cheers:
(https://i.imgur.com/sJzeSRJ.jpg)
-
Lovely picture Wim :like:
-
Thanks Matt :cheers: :tu:
-
Nice pic Wim. :like:
Delosperma Jewel Of Desert Garnet
-
Thanks Max :cheers:
You are probably right I have no clue :tu:
-
Latest find, 98 and 03 PSTII.
(https://uploads.tapatalk-cdn.com/20200615/41138cfa9731d92a6e3abac0cc66db00.jpg)(https://uploads.tapatalk-cdn.com/20200615/f7509bf539e90951a661e56576caf219.jpg)
Sent from my SM-N975F using Tapatalk
-
Nice 8) :like:
-
Just got the Wave+ and Rebar in the mail from another member here. Im a happy camper :mail:
-
Both are very awesome daily carries, congrats :salute: :tu: :like:
-
Maybe give me a break from the ol Surge. My back may thank me :whistle:
-
:iagree: :rofl:
-
:iagree: :rofl:
Wimps :twak: :rofl:
I carry mine anywhere between 5 & 7 days a week depending upon shift cycle for 8 - 10 hours a day :multi:
Though, to be fair, it is on a Tac' Vest these days :whistle: :D
-
Wimps :twak: :rofl:
I carry mine anywhere between 5 & 7 days a week depending upon shift cycle for 8 - 10 hours a day :multi:
Though, to be fair, it is on a Tac' Vest these days :whistle: :D
I carry my surge 5 to 6 days a week. 9 to 12hrs a day. I also have a 2nd and 3rd LM in other pockets. 1 is none after all.
-
I carried a Supertool 300 for a few years ;) and Saturday I even carried around an OG ST, ST200 AND ST300 :o Something lighter is all I need these days though :D
I do like its form factor but prefer it in the Wave/Charge size :D
-
Leatherman Crunch 0799...
Super happy I found this one..!!!
(https://uploads.tapatalk-cdn.com/20200626/b89d0f421995cd372935c360e5edc747.jpg)
Sent from my SM-N975F using Tapatalk
-
Leatherman Crunch 0799...
Super happy I found this one..!!!
(https://uploads.tapatalk-cdn.com/20200626/b89d0f421995cd372935c360e5edc747.jpg)
Sent from my SM-N975F using Tapatalk
Is that a version with improved bit holder, or still the older one?
... just kidding... the Crunch is a great tool :like:
-
Is that a version with improved bit holder, or still the older one?
... just kidding... the Crunch is a great tool :like:
Its one of the 1st versions of the Crunch. They were sold from 1999.
Sent from my SM-N975F using Tapatalk
-
Looks to be in great condition 8) :drool: :like:
-
Its one of the 1st versions of the Crunch. They were sold from 1999.
Sent from my SM-N975F using Tapatalk
I was just pulling your leg... trying to make a joke... :D Isn't it a marvel how compact it is? :tu:
-
Nice snag Hoody ! :cheers:
-
I was just pulling your leg... trying to make a joke... :D Isn't it a marvel how compact it is? :tu:
Lol sorry McStitchy, this week was 4 days to long for me. Think I'm going to sleep the entire weekend.
Sent from my SM-N975F using Tapatalk
-
Nice snag Hoody ! :cheers:
Thanx Steve..!!Looks to be in great condition 8) :drool: :like:
It is Poncho, the guy left it in a safe for the last 21 years. Only has a little scratch here and there, but the tools are all unused.
Sent from my SM-N975F using Tapatalk
-
Lol sorry McStitchy, this week was 4 days to long for me. Think I'm going to sleep the entire weekend.
Sent from my SM-N975F using Tapatalk
Well, thank God it's weekend. I hope for you as well :cheers:
-
Got a Super Tool 300M a few days ago. Love it so far. 😎
-
Great LM Dr :like: :tu:
-
I bought this one on eBay! I never saw this one before with a black oxide blade. Anyone know about it? When did they stop producing it?
-
Nice find ABURABURA :like: :tu:
-
:cheers:
Nice find ABURABURA :like: :tu:
-
Latest Mail Call...
1st Gen Surge...
(https://uploads.tapatalk-cdn.com/20200703/bbe2f41f38c7960fd94e5cee5c3eae9d.jpg)
Sent from my SM-N975F using Tapatalk
-
Latest is Free P4 and Charge+ tti. I'll get photos of the Charge later. (https://uploads.tapatalk-cdn.com/20200703/bbfbd8d5b1471b350b06e94ad9b45c3d.jpg)
Sent from my SM-G950U using Tapatalk
-
Nice one Hood3dVillian!
Sent from my SM-G950U using Tapatalk
-
:iagree: :like:
-
Latest Mail Call...
1st Gen Surge...
(https://uploads.tapatalk-cdn.com/20200703/bbe2f41f38c7960fd94e5cee5c3eae9d.jpg)
Sent from my SM-N975F using Tapatalk
The First Gen, in many ways, is a far superior model to the later ones. You've got the extra-small SD, and in my experience, the finer teeth grip so much better than the ST300's head. Mine is a 2011, and I got it really cheap when a local military surplus store was moving.
-
Just in yesterday :tu:
(https://i.imgur.com/tAy16AB.jpg)
-
Well, it came in yesterday but, my Climber helped me to open the package today: my BO Rebar is here! :woohoo:
Last two photos is with siblings. :whistle:
-
Nice tools everyone :like: :tu:
-
Mail Call, brand new Juice C2...!!!
(https://uploads.tapatalk-cdn.com/20200718/58c3423f09333c148641c7c0745907f4.jpg)
Sent from my SM-N975F using Tapatalk
-
Nice ! I also just got a Juice. :like:
(https://forum.multitool.org/index.php?action=dlattach;topic=33794.0;attach=484388;image)
-
Thanx Steve, nice colour on that Juice..!!!
Sent from my SM-N975F using Tapatalk
-
(https://i.imgur.com/38mE1yO.jpg)
:whistle:
-
What is it :ahhh
-
What is it :ahhh
My guess is that it is a Leatherman box (which may or may not contain something other than air) :rofl:
-
Crunch?
-
It's a Leatherman box which contained air...
And a brandnew Freestyle :D.
(https://i.imgur.com/8lQmsoJ.jpg)
(https://i.imgur.com/ozICycc.jpg)
(https://i.imgur.com/MQDznGZ.jpg)
I never bought one since I considered it to be a less useful version of the Skeletool, and I already found the Skeletool to be a bit too basic for my needs most of the time, and that one at least had a bit driver...
But if I'm not mistaken the Freestyle is out of production, which changes things for me :doh:.
Anyway, I'm surprised by how small it actually is and how light it carries in the pocket, even compared to the Skeletool.
This is not a multitool without a bit driver, this is a pocket knife that comes with a pair of pliers...
Licking it so far :tu:.
-
Please don't lick it , you will cut your tongue :D
-
Please don't lick it , you will cut your tongue :D
:rofl:
-
Please don't lick it , you will cut your tongue :D
Yep, that's what you get when you're still awake and posting stuff online at 05.00h...
:facepalm:
-
:rofl:
-
Please don't lick it , you will cut your tongue :D
:iagree: :rofl: :rofl: :rofl:
-
It's a Leatherman box which contained air...
And a brandnew Freestyle :D.
I never bought one since I considered it to be a less useful version of the Skeletool, and I already found the Skeletool to be a bit too basic for my needs most of the time, and that one at least had a bit driver...
But if I'm not mistaken the Freestyle is out of production, which changes things for me :doh:.
Anyway, I'm surprised by how small it actually is and how light it carries in the pocket, even compared to the Skeletool.
This is not a multitool without a bit driver, this is a pocket knife that comes with a pair of pliers...
Licking it so far :tu:.
Nice pick-up :tu: :tu: :tu:
I guess at 5:00AM anything is possible, even some quite dubious methods of interacting with your new MT :pok: ;) :rofl: :rofl: :rofl:
-
:rofl:
-
Just Ebayed an 0799 OG Crunch with a couple of DIY pocket clips. Fun tool! :mail:
(https://i.imgur.com/5zWgOE1l.jpg)
(https://i.imgur.com/KkXE5ohl.jpg)
(https://i.imgur.com/dFxfEmsl.jpg)
(https://i.imgur.com/qSFSJAMl.jpg)
-
Nice score ! :like: :like:
-
:iagree: :like: :tu:
-
:iagree: The Cruch is a really neat tool. Those pocket clips are pretty cool too. How well do they work?
-
:iagree: The Cruch is a really neat tool. Those pocket clips are pretty cool too. How well do they work?
Thanks! The clips both work great with a nice snug/deep carry and stay tightly attached in the pocket with the wrench adjustment screw. The main issue obviously is that as soon as you need to actually adjust the wrench, they either come loose and rattle around under the screw, or you need to take them off entirely. The wire clip has a gap up near the screw so I can fairly easily just loosed the screw and slide it off. The solid clip not so much. I'm considering trying to put a little dab of some sort of adhesive under the solid clip where it surrounds the the screw hole/bit driver, so it will stay in place when the screw is lose. I'm a thousand times more likely to carry a tool if it has a pocket clip versus needing a sheath/holster (ahem, CenterDrive).
-
:tu: My partners son loves his Rebar and will not carry in a sheath ( like an old man ) as he says :facepalm:. I've suggested a few ideas but he also doesn't want to mod it in any way :dunno:. So, I totally get it. A pocket clip is easy peasy when it comes to easy of carry.
-
My latest (and first) Leatherman is a Rebar.
Is it normal for these things to be so incredibly stiff?
-
My latest (and first) Leatherman is a Rebar.
Is it normal for these things to be so incredibly stiff?
YEs. Itll loosen up with use :tu:
-
My latest (and first) Leatherman is a Rebar.
Is it normal for these things to be so incredibly stiff?
Hello and welcome to the forum ! :cheers:
You picked a good one for your first Leatherman. It should and most do loosen up with use
-
This (courtesy of Sos24 :hatsoff: )
Is it Monday yet :whistle:
-
Nice one :like: :tu:
-
My first Wave (from Chako :cheers:):
(http://gallery.multitool.org/var/resizes/Syncop8r/Leatherman-Wave/IMG_20200808_140801.jpg?m=1596874808)
(http://gallery.multitool.org/var/resizes/Syncop8r/Leatherman-Wave/IMG_20200808_140751.jpg?m=1596874808)
(http://gallery.multitool.org/var/resizes/Syncop8r/Leatherman-Wave/IMG_20200808_140148.jpg?m=1596874808)
(http://gallery.multitool.org/var/resizes/Syncop8r/Leatherman-Wave/IMG_20200808_135920.jpg?m=1596874808)
It has since had a little clean.
I didn't think my Surge was that big until I had this to compare.
-
Nice one :like: :tu:
:hatsoff:
-
my latest is a surge and it is better than i remembered. I handled one long ago and wasn't really into it. But now, switching completely to lm, i do like it... it is a brick, but yes. Only downside that i see, is the fact that for an optimum torque power i need the piranha as well. But that, i do need with every single mt, except the wenger type. And the scissors are great.
-
Very nice Edi. Surges are awesome if you need a monster :whistle:
-
Nice tools guys :like: :tu:
-
Bought a few tools from a fellow South African member. Super happy about these....
Sent from my SM-G980F using Tapatalk
(https://uploads.tapatalk-cdn.com/20200822/aaa9611203a6a0d9a9da3e1cd49af546.jpg)(https://uploads.tapatalk-cdn.com/20200822/afd44434a2bee88626ede5af1df3c7ef.jpg)
-
:like: :tu:
-
Bought a few tools from a fellow South African member. Super happy about these....
Nice haul ! :tu: :salute: :hatsoff:
-
:iagree: :like: :cheers:
-
These just arrived in today.
A moss green Skeletool and a pair of sublime green and columbia blue Skeletool KBX knives. Frankly, I think the green is the same on both the Skeletool and the KBX. I never went for the moss green Skeletool because I wasn't sure if it was the same green as found on the other one. I was wrong.
(https://live.staticflickr.com/65535/50268081597_bc272bc670_k.jpg) (https://flic.kr/p/2jA24m2)IMG_9072A (https://flic.kr/p/2jA24m2) by Chako (https://www.flickr.com/photos/187039850@N04/), on Flickr
(https://live.staticflickr.com/65535/50267240328_bcd49b4c96_k.jpg) (https://flic.kr/p/2jzWKgo)IMG_9075A (https://flic.kr/p/2jzWKgo) by Chako (https://www.flickr.com/photos/187039850@N04/), on Flickr
They look good with the others.
(https://live.staticflickr.com/65535/50267239908_b4baa89620_k.jpg) (https://flic.kr/p/2jzWK99)IMG_9076A (https://flic.kr/p/2jzWK99) by Chako (https://www.flickr.com/photos/187039850@N04/), on Flickr
Here is a better photo showing the differences between the greens.
(https://live.staticflickr.com/65535/50268080457_679aeeb877_k.jpg) (https://flic.kr/p/2jA241n)IMG_9077A (https://flic.kr/p/2jA241n) by Chako (https://www.flickr.com/photos/187039850@N04/), on Flickr
-
Love the colour Chako :like: :tu:
-
Love the colour Chako :like: :tu:
:iagree: Amazing collection and array of colours :tu:
-
Bought a few tools from a fellow South African member. Super happy about these....
Sent from my SM-G980F using Tapatalk
(https://uploads.tapatalk-cdn.com/20200822/aaa9611203a6a0d9a9da3e1cd49af546.jpg)(https://uploads.tapatalk-cdn.com/20200822/afd44434a2bee88626ede5af1df3c7ef.jpg)
:like: Nice one :tu:
-
Charge Monkey Edition
-
Cool Charge ! :drool:
-
Agreed. Never seen that one before.
-
Very nice Charge :dd: :like:
-
My latest editions to my small but growing collection
-
:like:
-
I picked up a very nice Blast today at a local pawnshop for $35. The sheath was trashed but I had a spare of the new nylon button kind laying around. After a good cleaning and sharpening, ready to try it out for EDC for a while.
-
The Blast is a great design. I am sure you will like it.
-
Love my Rebar! Looking into the super tool as my next toy.
-
Juice XE6.(https://uploads.tapatalk-cdn.com/20200912/3017ed0bcea1252fb569c94e9fa44334.jpg)
Sent from my SM-G980F using Tapatalk
-
Very nice additions everyone. :like:
-
:iagree:
-
Got a Juice B2 and Freestyle since they seem to be on closeout and I've always found them interesting, but wasn't willing to pay full price.
But what I'm really stoked about is this ST300. Can't beat $50 shipped for a brand new tool. Obviously not new in terms of ownership, but was basically bought and never used. Guess it was too big for the PO? I've already put it to use using the awl to clean up some holes in drywall so I can fill them and paint them over. Just really prefer the traditional style tools.
-
Congrats ! I also prefer the original box design MT's :like:
-
My latest purchase, Charge+ G10 Earth...(https://uploads.tapatalk-cdn.com/20201102/1f26b1d8c0795b039f3dc64816efff5e.jpg)
Sent from my SM-G980F using Tapatalk
-
:like: :tu:
-
Cool Charge! :like:
-
:drool:
-
Scored a BO Rebar for a great price , on it's way now :tu:
(https://i.ebayimg.com/images/g/VwMAAOSwjXtftH3L/s-l1600.jpg)
-
8) :like:
-
Excellent tools pilo, Hood and Steve, congrats :cheers: :drool: :drool: :drool: :like:
-
Scored a BO Rebar for a great price , on it's way now :tu:
(https://i.ebayimg.com/images/g/VwMAAOSwjXtftH3L/s-l1600.jpg)
Nice score Steve :like:
I had a BO Rebar in mind a couple of times, but never went for it. Prices over here are hideous :P
-
Nice score Steve :like:
I had a BO Rebar in mind a couple of times, but never went for it. Prices over here are hideous :P
I have been looking for a while for one at the right price. They average around $55 used on ebay. I got this one new in package for $50 with free shipping :tu:
-
I have been looking for a while for one at the right price. They average around $55 used on ebay. I got this one new in package for $50 with free shipping :tu:
Now that's a good deal :tu: :multi:
-
:like: That is a good price NIP.
-
$50, really, thats £37 in the Queens money. Here in Blighty (uk) we pay a bloody fortune for any Leatherman products. On Leatherman.co.uk a Rebar retails for £84.95, get this, a knifeless Rebar is £94.95. I'm not bitter in any way over this, honest. ???
-
Awesome price :tu: :like: :like:
-
Just got this in
(https://i.imgur.com/Q19sFaPh.jpg)
Anyone know what it is :think: :D
Another pic :dd:
(https://i.imgur.com/ZOWPJQsh.jpg)
-
Nice image Poncho. :like:
-
Thanks Fuzzy :hatsoff:
-
I went to our local Cash Converter today. Picked up a like new Free P2 with sheath for $50 and a Free T2 for $20. I really like the P2, but the T2 is disappointing. Any SAK is far better.
-
Just got this in
(https://i.imgur.com/Q19sFaPh.jpg)
Anyone know what it is :think: :D
Another pic :dd:
(https://i.imgur.com/ZOWPJQsh.jpg)
Nice Poncho. Its a beauty isn't it? Of all the ones I had thru my hands its the one I kept.
-
Just got this in
(https://i.imgur.com/Q19sFaPh.jpg)
Anyone know what it is :think: :D
Another pic :dd:
(https://i.imgur.com/ZOWPJQsh.jpg)
Looks like it's a Leatherman :D
Nice signal buddy ! :like:
-
Just got this in
(https://i.imgur.com/Q19sFaPh.jpg)
Anyone know what it is :think: :D
Another pic :dd:
(https://i.imgur.com/ZOWPJQsh.jpg)
Nice topo
-
Just got this in
Anyone know what it is :think: :D
By far the best looking Signal out there!!!
Those numbers are somewhere in a forest close to Portland?
Pete
-
By far the best looking Signal out there!!!
Those numbers are somewhere in a forest close to Portland?
Pete
I believe that is what I remember reading :think: :cheers:
Thanks everyone :hatsoff: Loving this tool for sure :dd:
-
I went to our local Cash Converter today. Picked up a like new Free P2 with sheath for $50 and a Free T2 for $20. I really like the P2, but the T2 is disappointing. Any SAK is far better.
Congrats on getting such a good deal on those :o :like:
-
Leatherman charge+earth g10.
-
Leatherman Tread...(https://uploads.tapatalk-cdn.com/20201215/a9b10da087688cb3213542f7723abbb5.jpg)
Sent from my SM-G980F using Tapatalk
-
Congrats on the newest editions lee and Hood :cheers: :like:
-
Just got this in
(https://i.imgur.com/Q19sFaPh.jpg)
Anyone know what it is :think: :D
Another pic :dd:
(https://i.imgur.com/ZOWPJQsh.jpg)
Looks like a topographic map to me.
-
Got a black and silver Skeletool for Christmas.
(https://api.pcloud.com/getpubthumb?code=XZxWi8XZJFxINwfhcAb9U3FvgULlnunhfLKV&linkpassword=undefined&size=1920x960&crop=0&type=auto)
-
Looks like a topographic map to me.
Yep :cheers: it is a TOPO Signal :D Took me a lot of looking to find a great priced Signal and I never thought I would get one of the TOPO models :ahhh but I did :o :like:
and great pic of a great tool :like:
-
Waiting for the Super tool 300 m in the mail. :multi:
-
:like:
-
A back-up Rebar. :cheers:
And a MP400, MrPinchy, and a Dime!
(https://i.imgur.com/CbdAUlf.jpg)
-
:like:
-
Sweet, RP :like:
-
Whilst I no longer collect tools, I'm usually on the look out for SAK or MT memorabilia :D
Grabbed a pair of leatherman display stands (ebay pics below) which duly arrived today.
The tragedy is I grabbed a job lot last year (bottom picture) and the parcel still sits in the garage un-opened :facepalm:
Someday I'll have my mancave :dd:
-
So I received Mt leatherman T4 a week ago. Its OK but not great. Very bulky, I like the Free P4 and the features on the T4 are good but it's just soooooo big. A medium sized Swiss army :climber: has the same features but half the thickness.
-
So I received Mt leatherman T4 a week ago. Its OK but not great. Very bulky, I like the Free P4 and the features on the T4 are good but it's just soooooo big. A medium sized Swiss army :climber: has the same features but half the thickness.
Really interested in your brutal honesty
Any chance of uploading a pic showing the size comparison between the T4 and SAK?
-
Really interested in your brutal honesty
Any chance of uploading a pic showing the size comparison between the T4 and SAK?
It's the thickness and square finish. As a small pocket carry the SAK wins. The leatherman is clearly a better tool. I might take the pocket clip off and see how that feels.
I own a P2 as well and the size difference between the two is minimal, I feel like I should just carry the P2 and have a set of pliers on me for not much difference in size.
I'll try again to post pics. Won't seem to upload them.
-
Any suggestions how to get the pic quality down low enough to post?
-
Comparison
-
Sorry about the multiple posts, pretty poor with forum use.
-
Thanks did the comparison shots, Yoda :salute: :like:
-
Thanks Yoda
Have to say that does look quite uncomfortable for pocket carry
-
My wife gifted me this Free P2 recently, and I’m getting along very well with it - tho, I have some thoughts on ways to improve it.
-
Love me free P2. Curious as to what you would modify. Used mine all weekend for a variety of jobs and it's been great. Only thing I'm not overly happy with is the large serations on the blade, they seem overly deep.
-
Love me free P2. Curious as to what you would modify. Used mine all weekend for a variety of jobs and it's been great. Only thing I'm not overly happy with is the large serations on the blade, they seem overly deep.
I would like to see a nail knick on the package opener for starters. Maybe smooth out the plier grips a little.
-
(https://uploads.tapatalk-cdn.com/20210308/24489999f604447607756de584570a03.jpg)
To commemorate the fifth year passing (3/18/16 DOD) of my late father. He had earned the nickname “the old Gray Coyote,” while he worked at the Lake Powell Generating Station. I also bought a green Micra for my Mom, with a howling Coyote on the back, and a personal engraving on the other side. I want to get a similar tool for my brothers when I can.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20210308/24489999f604447607756de584570a03.jpg)
To commemorate the fifth year passing (3/18/16 DOD) of my late father. He had earned the nickname “the old Gray Coyote,” while he worked at the Lake Powell Generating Station. I also bought a green Micra for my Mom, with a howling Coyote on the back, and a personal engraving on the other side. I want to get a similar tool for my brothers when I can.
Sent from my iPhone using Tapatalk
Thats a nice way to remember him - and it looks good.
-
:iagree: :tu:
-
:iagree: :salute:
-
(https://uploads.tapatalk-cdn.com/20210314/b67a629ece5caac286061aefaa67fe29.jpg)
(https://uploads.tapatalk-cdn.com/20210314/dd9733400bd03c927baa98b076a5b1ed.jpg)
I just caved and ordered this Charge+. I also have a Leatherman Micra for myself, and my brothers I’ve ordered to hope to get to them around the time my father passed. The Charge+ might be a gift for my older brother for a different reason, or I just might keep it myself. If I do, I’d sell my Wave+
Sent from my iPhone using Tapatalk
-
Nice one, ST; and to have both sides etched... :drool:!!!
-
Nice, what does the etching signify ?
-
Nice, what does the etching signify ?
It just references a character, Soundwave, from the Transformers universe.
Sent from my iPhone using Tapatalk
-
Cool, I just read that in the other thread :tu:
-
Made my first trip to Lowe's in over a year, as I needed a specialty gas cap for a walk-behind lawnmower. Decided to get a Free T2 while I was there. It's a bit of a gimmicky design, but MUCH better than the Crater C33T it is replacing. Honestly, that's the only bad Leatherman I've ever bought.
I think the design is bulkier than it should be, and the big spacer at the end should've been smaller, allowing for decent tool lengths. The knife blade is about as long as the frame, but the secondary tools are as much as an inch shorter than they could be. Heck, a Ranger from Victorinox weighs about the same, is roughly the same width, and has lots more tools. The same cost roughly too. The tools on the Free are thicker, and surprisingly, the smashed/semi-flat Phillips is the first I've had that didn't suck.
I ordered the pocket clip from LM as soon as I got home.
(https://i.postimg.cc/vTprk4Tn/KIMG4034.jpg)
-
A couple more Leatherman dealer items
I have a few of the tools and store displays but really wanted the signs and dealer brochures.
Hopefully arriving soon
-
Just scored another LM display
This is for the micra
I find collecting multitool and SAK paraphernalia far more interesting ( read cheaper :ahhh ) than collecting the tools themselves.
-
Pretty cool. :like:
-
I don't have time to take pics but I received my late grandfather's 96 PST in the mail from my grandmother. I've cleaned and oiled it, it's in fantastic condition and I'm really excited to have it. I'll try to get pics up early next week, I'm off to start another 12 hour shift now.
-
I don't have time to take pics but I received my late grandfather's 96 PST in the mail from my grandmother. I've cleaned and oiled it, it's in fantastic condition and I'm really excited to have it. I'll try to get pics up early next week, I'm off to start another 12 hour shift now.
Always great to get a tool that has sentimental value to it :salute: Congrats :tu: and I can't wait to see pics of it later :popcorn: :like:
-
:iagree: :tu:
-
My first Signal
(https://uploads.tapatalk-cdn.com/20210501/538c5524834ac1f762eec7776c3a9306.jpg)
-
:drool: That is one of the best color combos of all MTs.
-
:iagree: :dd: Congrats :like:
-
Thanks Aloha and Poncho.
I’ve been eyeing it for a while and finally got it.
-
Sweet Signal Sherry ! :like: :tu:
-
:drool: That is one of the best color combos of all MTs.
:iagree: I love that blue.
-
I hadn't seen that blue before! Makes a lot more sense than camo colours on a outdoor MT. :tu:
-
I knew this thread existed.... I have already posted this elsewhere but oh well.
Pocket Survival Tool:
(http://gallery.multitool.org/var/resizes/Syncop8r/Leatherman-PST/IMG_20210720_163555.jpg?m=1627023252)
(http://gallery.multitool.org/var/resizes/Syncop8r/Leatherman-PST/IMG_20210720_162651.jpg?m=1627023253)
-
Still great pics ;) :like:
-
Thanks. :hatsoff:
Not as sharp as yours.
-
Most of my pics are hit and miss :D Sometimes really good and sometimes not so much :ahhh :oops: :facepalm: :D
Wished all of mine turned out as good as those above :cheers:
-
Juice SC2, one I’ve been after a while and not easy to get here in Australia
It’s in good shape although does have a name badly scratched on one side, luckily it’s quite small so no deal breaker.
As I’ve found with other Juices in my collection, the flatheads are difficult to get out. Will give it an oil and hopefully all good
(https://uploads.tapatalk-cdn.com/20210812/62219a9b38eb45f243515c23ed697a5a.jpg)
(https://uploads.tapatalk-cdn.com/20210812/aea48d4b38425d4bd8c1f54c74a125a8.jpg)
-
Nice catch. Like the SC2 a lot. :tu:
-
Received today a leatherman pump. Going to be keeping it with my shotgun and on the field when hunting this season.
-
Congrats Echo and jc :tu: :like: :like:
-
Thanks pa and Poncho :tu: :tu:
-
This abomination >:(
-
I am sure I can help you remedy this :whistle: I can just PM you my addy and you can pop it in the mail to me :salute:
:D
-
This just came in the mail! :mail: :woohoo:
Finally succumbed to the "C" word, and ordered (and got) an example. Just like I've read, it is a marvelously engineered tool, exquisite to look and hold; love the capability of using regular or LTG's bits without adapters! Although small, the file is usable (somewhat aggresive since it is of recent manufacture, 01 and 03/20 dates; I understand that earlier models have a finer cut.), and not dinky like the Rev/Sidekick/Wingman/P series' one.
The SE blade is sharp and functional and, dare to say it, I like it. Also to my liking is the pin vise, and integral cutters. Also nice is the two flat and #1-2 Phillip's drivers, which are the sizes that I most commonly used, and not the plethora found in other Leathermans. My only gripes are easily fixed, as the tools are somewhat floppy and my guess is that by tightening the pivot it will be alright and, the tools and adjusting bolt are "gritty" and might need a bit of oil. I'm glad I finally got it. :tu:
One question though, is the Crunch the only MT without a can opener!?!?!? :dunno::rofl:
-
:woohoo: :cheers: :tu:
-
Got myself some new toys :multi:
(https://i.ibb.co/TB0bzPS/IMG-20210828-134952499.jpg)
(https://i.ibb.co/S7Wf3Lk/IMG-20210828-135055457.jpg)
I honestly love all three. Outstanding job, Leatherman. The Crunch is just a really well engineered and unique tool. The Bond and Curl just rock a timeless simplicity. Sleek, lightweight, and high quality.
All three tools just feel amazing in the hand. Very sleek. I feel like lots of multitools feel like double the size for worse functionality. The awl on the Curl just makes me more annoyed that the Wave doesn't have one! The knife "issue" on the Bond seems to be a massive overreaction. At least on mine the tension is such that that knife is never coming out accidentally.
I ordered a second crunch just because I like this one so much and I'm seeing the prices start to rise precipitously on ebay.
-
Congrats Juan and Nets 8) :drool: :like: :like:
-
My new silver Rebar and pocket clip arrived yesterday. :mail:
-
Congrats, Juan 8) looks great :drool: :like:
-
:iagree: :like: :tu:
-
Look what the
cat dragged delivery service brought in...
-
Looks to either be a Pulse or ST200 :think: could be wrong :whistle:
Looks great though and love the old school sheaths :like: :like:
-
Close... :D
-
Even better :ahhh :woohoo: :like: :like:
-
Better still... it's in fantastic shape...
-
That is great to hear, DT :salute: An OG ST has a very authentically pleasing look to it 8) :like:
-
Awesome score DT :ahhh :like:
-
:iagree: :like: :tu:
-
:iagree: too!
I am a big fan of the OG ST :tu:
-
Latest is a Juice S2.
-
Nice 8) :like: :like:
-
Latest is a Juice S2.
Nice find FB! :like: :tu: :tu:
-
ST300
(https://uploads.tapatalk-cdn.com/20211203/1ba6d1b8aa0849e93c270960ad210b27.jpg)
-
Congratulations :woohoo: Great pic of a great tool 8) :like:
-
It’s a beast :)
Thanks Poncho :tu:
-
The ST300 is a tank that's for sure :salute: I have used them fairly hard over the years without any problems :tu:
-
Hello, i got a Rebar and the story of it starts with me abandoning the hunt for oldest PST i can get / i need also one Japan made, and obviously once i made peace with my decision, out of the blue, one pops out. Hard negociation with the seller who upped the price by 25% but i still got it. Cleaned the Japan PST real well, shelfqueen what to else to say about it, and while i was playing with it the horror happens, the lock breaks. Ohh the hell, i should have stayed in peace without the hunt. Asked here and there how can i repair it, ended writing to Leatherman and I opted for a replacement as this is what they could offer me in the situation. So, one good story how i got and "lost" a Japan PST and what a great warranty Leatherman has.
-
Sorry to hear it broke after you finally found one :facepalm:
The Rebar is a great tool but it is sad how you eneded up with one :oops:
Congratulations either way because LM warranty is great :salute: :like:
-
Proof that good things come to those who wait (for months!)... and money saved due to information shared by SteveC (whitemountainknives.com) and Poncho (coupon code CCE):
(https://i.imgur.com/8W4pZm3.jpg)
(https://i.imgur.com/C3uB4B1.jpg)
Why didn't I go ahead and order a clip for the Bond?! I am not the most anal person in the world, but those holes bug me a lot :facepalm:
-
Proof that good things come to those who wait (for months!)... and money saved due to information shared by SteveC (whitemountainknives.com) and Poncho (coupon code CCE):
(https://i.imgur.com/8W4pZm3.jpg)
(https://i.imgur.com/C3uB4B1.jpg)
Why didn't I go ahead and order a clip for the Bond?! I am not the most anal person in the world, but those holes bug me a lot :facepalm:
Congrats! I hope you like the Curl as much as I do. :tu:
-
Congrats on getting those 2 :salute: They are pretty good tools for sure :like: and glad the code still worked :woohoo:
-
:like: :tu:
-
Thanks guys :cheers:
I was hoping that the Curl's price had not changed and that the code still worked. Very happy that nothing had changed.
After finding that the code still worked, I impulsively added the Bond to my order. This time, I can tell my wife that I saved her money. Usually I am the one being told :rofl:
-
:like: :rofl:
-
Why didn't I go ahead and order a clip for the Bond?! I am not the most anal person in the world, but those holes bug me a lot :facepalm:
Didn't your Curl come with a pocket clip installed on it? Mine did. Just take it off and put it on your Bond.
-
I would like for both of them to have clips.
-
Gift from my wonderful fiancée :angel: Merry Christmas everyone!
-
Nice ! :tu:
-
Yeah, that is a nice set of gifts :like:
I need to inform my wife of this.
"See... This is what the other members are getting from their spouses/fiancé(e)s." :D
-
Yeah, that is a nice set of gifts :like:
I need to inform my wife of this.
"See... This is what the other members are getting from their spouses/fiancé(e)s." :D
:iagree: :D :like: :like:
:nanadance: :nanadance:
-
Nice kit, nakken, and Happy Holidays! :2tu: :dd:
-
Here are my newest (as just in!!!) products: Heritage sheath for OE Wave (but in fact for my 2nd Gen. Wave) and, my CT Signal. :multi:
-
I won a pair of Surges last night :D one all black, one black and silver :woohoo:
-
Well.. they're Leatherman... :think:
Another bit kit ( :facepalm:), and a little something to mod for the Signal. :whistle:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Well.. they're Leatherman... :think:
Another bit kit ( :facepalm:), and a little something to mod for the Signal. :whistle:
Excited to see what you've got planned for the Signal! :D
-
Excited to see what you've got planned for the Signal! :D
Thanks, nakken, but not much, really; more of a hack. Here, have a look...!
https://forum.multitool.org/index.php/topic,62987.msg2309436.html#msg2309436
-
Thanks, nakken, but not much, really; more of a hack. Here, have a look...!
https://forum.multitool.org/index.php/topic,62987.msg2309436.html#msg2309436
Perfect, thanks! :tu:
-
A NIB-NOS Charge ALX! :multi:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
A NIB-NOS Charge ALX! :multi:
[ This attachment cannot be displayed inline in 'Print Page' view ]
(https://i.imgur.com/FSDCUNfm.jpg)
-
:iagree: :dd: :drool: :like:
-
Original Gourmet Tool - Flair :mail:
-
:like: :tu:
-
Great find Willie, looks unused too :like:
-
Nice find, and one I'd not previously heard of. :like:
-
Great find Willie, looks unused too :like:
:iagree: and great pics :like: :like:
-
:iagree: :tu:
-
Thanks guys ;)
It was tough battle... 40 bids... but it's worth every penny :woohoo:
-
Congrats. Its a really neat tool. Nice pics as well.
-
I got my first 3. A Wave + Silver/Black, Charge + G10 Earth, and a Skelitool KBX.
-
Welcome to :MTO: Bob :cheers:
Some really great tools to have :o :drool: :like: :like:
-
:iagree: :tu:
-
Heck of a trio out the gate. Nice LMs.
-
:woohoo: I'm expecting a postman tomorrow :mail:
-
Day 4 of our vacation to Poland. Saved $50 on the 15th member of my multitool collection ::)
-
Those Coyote Tan Skeleys are so awesome :drool: Congrats on getting a better deal :salute: :like:
-
Thanks Poncho! :D
-
Now that's what I call a great souvenir! :tu:
-
A very old Pulse…
[ This attachment cannot be displayed inline in 'Print Page' view ]
That appears to have never been put to use!
-
:like: :like:
-
Great find LoopCutter, congrats! :drool:
-
Great score, LC! :like:
-
It's not really a Leatherman, as much as it's from Leatherman :angel: I just got the heritage sheath for my Wave. Seems well made and has a perfect fit
-
It's not really a Leatherman, as much as it's from Leatherman :angel: I just got the heritage sheath for my Wave. Seems well made and has a perfect fit
Very nice!
As close as you can get to the original sheath that was included with the 1st generation Wave.
Do not see as many on guys belts today, but when you did, you knew that person had a Wave and that he took care of his toys
-
Very nice!
As close as you can get to the original sheath that was included with the 1st generation Wave.
Do not see as many on guys belts today, but when you did, you knew that person had a Wave and that he took care of his toys
That is really cool, I didn't know that. Thanks! :cheers:
-
That is really cool, I didn't know that. Thanks! :cheers:
here is the original wave sheath if you want to compare. The wave it came with is an 09/99.
-
new to me salesman samples
a gen 2 CS4 06/13 ($50)
and a leatherman charge plus ($50) 07/17 The black scale is missing the + if you look closely.
-
Great finds cnlson :o :woohoo: :like:
-
A ST200 landed early in my mail box today.
Did not expect until next Tuesday at the earliest.
Found this on the auction site, listed USED. Seller was a 100% type, so took chance, my bid had a cap, and did not it be high with at least an hour to go, so yes I bid and forgot. My first entry held and payment was made.
My 2nd oldest LM, with 1103 s as bd 1203 handles. Inspection picture.
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like:
-
Congrats LC :like:
-
here is the original wave sheath if you want to compare. The wave it came with is an 09/99.
That is awesome, thank you for sharing! :tu:
Also, great finds cnlson and LC :like:
-
Hello
A wingman, very lightly used, best part it was a gift.
To be honest, I confiscated it from a co worker who is not a tool maniac.
Actually all my 3 LMs are free.
I have a rebar from my workplace and a micra from another friend. :whistle:
-
A good assortment of three very different tools.
If hanging with you, remind me to put a tether on my shiny MTs 😜
Rebar is my go to tool daily, the ST300 for bigger tasks.
Find yourself a Pulse and experience a level of eloquence that preceded the Rebar🤪
-
Yes. Better be careful >:D
-
Just got a brand new Raptor. :like:
-
Congrats, RP :woohoo: the Raptor is a very nice tool :tu: :like:
-
ST200, $34 on ebay. 12 03 and 02 04 handles
The roller locks are unique but i am glad they are not the standard for all
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
What a bargain, congrats cnlson! :drool:
-
ST200, $34 on ebay.
The roller locks are unique but i am glad they are not the standard for all
[ This attachment cannot be displayed inline in 'Print Page' view ]
Good find!
I agree the rocker lock release is a unique challenge! But, there is a very simple work around.
If you have a tool locked open, to release it, you can open any other tool in that end of the handle, and it will also release the lock allowing you to close both implements. 👍
Saving your thumb!
-
Good find!
I agree the rocker lock release is a unique challenge! But, there is a very simple work around.
If you have a tool locked open, to release it, you can open any other tool in that end of the handle, and it will also release the lock allowing you to close both implements. 👍
Saving your thumb!
very true, i am just glad my charge does not have a similar locking mechanism is what i meant to convey
-
So, I'm having a multitool month, it started with a discussion on a youtube video where they compared a leatherman and swisstool. So I bought a swisstool x off ebay ($79.99) to compare for myself, [ This attachment cannot be displayed inline in 'Print Page' view ]
and I left a Craigslist notification running and saw 2 new in packaging swisstool rs for only $65 each. I even posted it on the sak forum and nobody ever called the seller... Nobody but me, she was completely out of the past, no email, PayPal, texting, only a home phone. So initially my pitch to let me pay her by PayPal and her to ship struck out. So while on Craigslist I happened to see a Knockoff Kershaw a100. Because I had missed on the rs's I hit him up and offered $20 for it. [ This attachment cannot be displayed inline in 'Print Page' view ]
Then I had a dream, of the money I'm going to make selling the rs's on eBay, and I called the little old grandma up on her land-line and left her a message on an honest to goodness tape answering machine. And so I mailed her a box with $130 in cash, and a prepaid ups label to tape on the box back to me and I've got them now, one is at $100 or so right now on ebay so I might end up paying for both with one sale. The other I'm going to test that rescue cutter on before I sell it.
Then it's that time of the year for my military discount buy at leatherman, so a st300m, a topo signal, and a crunch were ordered and delivered.
[ This attachment cannot be displayed inline in 'Print Page' view ]
And then the new/old juices appeared and I ordered a moss green xe6. Of course I need nothing more, right? Then I made a lowball offer on a spirit x so that may arrive around the time the juice arrives
The multiverse of multitools
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Great story and nice haul mate :like:
-
Great haul :o :ahhh :like: :like:
-
Mailing the cash in the return box was a risky but ingenious move :tu:
-
Mailing the cash in the return box was a risky but ingenious move :tu:
She's someone's grandma, she's not gonna cheat me
-
:like: :tu:
-
:like:
-
She's someone's grandma, she's not gonna cheat me
It's not the honest grandma's you have to worry about, it's the US Postal employees you have to be concerned about (unfortunately a few bad apples spoil it for all the honest ones). And yes, I am speaking from experience - but I found paying extra for insurance seemed to encourage everyone involved to play nice (probably the extra paperwork and awkward explanations needed about missing packages contributed to the extra reliability of delivery).
-
It's not the honest grandma's you have to worry about, it's the US Postal employees you have to be concerned about (unfortunately a few bad apples spoil it for all the honest ones). And yes, I am speaking from experience - but I found paying extra for insurance seemed to encourage everyone involved to play nice (probably the extra paperwork and awkward explanations needed about missing packages contributed to the extra reliability of delivery).
in theory they are supposed to check for money in the mail. but rarely if ever do they, So not a worry of mine.
-
Mailing the cash in the return box was a risky but ingenious move :tu:
I didn't think she was the risk. The risk, in my mind, was the possibility of the box not making it to her.
-
Behold, the Charge+ TTI :viking:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:woohoo: :like: :like:
-
On an impulse buy, I got a Wave+ at my local Ace Hardware yesterday! I now have the Wave I, II, and + and have the entire series! Woot! :climber: :D
-
Congrats, mike :woohoo: :like:
-
:iagree: What a MT spree. Its always nice to get what you want and sell the ones you dont yet still make out.
-
:woohoo:
-
:woohoo: Congratulations :woohoo:
-
I bought three new / new to me tools during the November PST Challenge, so I’ve only just stated to really carry and get a feel for them.
The Juice is a chunky little thing, and the inside tools are very stiff.
I thought I’d like the Rebar more than I do. It’s a great tool, but I suppose because I already own a PST, a Bond, and a Supertool 300, it doesn’t wow me.
The Free P4 is my favourite of the new trio. I wish it was a bit thin and a bit lighter, but it’s got everything I need for everyday carry as I like woodsaw and prefer to have a serrated blade and fixed drivers rather than swapping (and dropping) bits.
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Great trio of tools, Crunchie :woohoo:
All excellent choices if you ask me :salute: :like:
-
Great trio of tools, Crunchie :woohoo:
All excellent choices if you ask me :salute: :like:
:iagree: Great choices :tu: I'm a big fan of the Free series.
-
My latest OHT looks almost symetrical :dunno:
-
:rofl:
What the heck?
-
:oops:
:rofl:
-
Two saws ?!! :ahhh
-
Got these lately :cheers:
(https://i.imgur.com/eGrnp8uh.jpg)
And one of these :ahhh
(https://i.imgur.com/GKtCeevh.jpg)
-
Oh boy ! :ahhh :like: :like:
-
My latest OHT looks almost symetrical :dunno:
Oooh man, I know its important to have redundancy when far from homebase but this... :facepalm:
Or, is it the extreme of the N+1 concept!?!? :think:
Just kidding! Keep it, as it makes for one interesting collectible factory one-off/mismanufacture! :tu: :multi:
-
Got these lately :cheers:
(https://i.imgur.com/eGrnp8uh.jpg)
And one of these :ahhh
(https://i.imgur.com/GKtCeevh.jpg)
Classics and oldies; with OE boxes!!!!!
Congrats on a great New Year start! :2tu:
-
Thanks Stitchy and Juan :hatsoff:
-
Wow! Those pristine boxes are impressive :o :tu:
-
Just amazing, Poncho! :like:
-
Oooh man, I know its important to have redundancy when far from homebase but this... :facepalm:
Or, is it the extreme of the N+1 concept!?!? :think:
Just kidding! Keep it, as it makes for one interesting collectible factory one-off/mismanufacture! :tu: :multi:
I got a good chuckle out of it. I thought a klutz added a saw in place of the serrated blade before realizing it was the whole half of the OHT. Interestingly enough, there is only one lock tab, hence "almost symmetrical" :salute:
Now if anyone with a tan OHT with the other two halves, please feel free to contact me...
-
Thanks Rich and Farmer :hatsoff:
The boxes are super crispy and look like they have been pulled straight from the mid 90s :dd: :drool: :woohoo:
-
Congrats Poncho ! :woohoo:
-
Thanks Steve :hatsoff:
-
After almost a year, I bought another Bond to replace the one I lost.
Of the current lineup, I think it's my favorite LM (along with the Rebar).
(https://i.postimg.cc/bNsnByFv/IMG-20230108-184030.jpg)
-
Congrats cody :woohoo: the Bond is a great tool :tu: :like:
-
Charge G10 (orange)! :multi: [ This attachment cannot be displayed inline in 'Print Page' view ]
-
Two! Nice :tu:
-
Two! Nice :tu:
Thank you, Rich! :cheers:
Two, yes!; but the one with the opened blade was my first one from a year ago, got in charge of opening the package of the newest one. :D
-
:woohoo: :like: :like:
-
:hatsoff::cheers:
-
:hatsoff::cheers:
Congratulations! The G10 was my latest although I will be adding two more sometime later this week or next. :D
-
couple of weeks ago i bought juice XE6 and it came with sheath that is certainly not for Juice, does anyone knows which leatherman came with this kind of sheath?
-
couple of weeks ago i bought juice XE6 and it came with sheath that is certainly not for Juice, does anyone knows which leatherman came with this kind of sheath?
Possibly a Squirt or a Micra ? I don't know whether a Mini might fit in it.
-
If it is big enough for a 4 inch tool then it may have came with a Wingman or SideKick :cheers: seems like the earlier ones came with that sheath and a LM carabiner but later ones didn't come with either :salute:
-
If it is big enough for a 4 inch tool then it may have came with a Wingman or SideKick :cheers: seems like the earlier ones came with that sheath and a LM carabiner but later ones didn't come with either :salute:
the cardboard box had "sidekick" label on it so i guess you are right
-
:woohoo: :hatsoff:
-
Bought a hard used pst for not a lot. Plan is square it away and use the hell out of it.
[ This attachment cannot be displayed inline in 'Print Page' view ]
Slop on the pliers, blade badly "sharpened" with tip bent, file gunked up, and flat heads a bit rough.
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
(https://i.ibb.co/df8Zhqr/20230413-163952.jpg) (https://ibb.co/yNH231X)
Came up well, everything sorted and ready for action, even fed the sheath :salute:
-
Excellent pics and excellent tool, ed :salute: :like: :like: :like:
-
These generation Leatherman are my go to for actual carry as are small and I like the design, now I keep the other pst for Sunday use :tu:
-
Nice job cleaning her up !
The PST is still my favorite LM and is all that is really needed 98% of the time.
-
Very nice job. :like:
-
The PST is a nice MT and agree that it covers the bulk of what you need a MT to cover. Form factor is amazing...it punches above its weight class for sure, IMHO.
-
A package just in from Leatherman HK to me (in the UK).
£150, almost half of it shipping, for a new Cam, a Style PS, and two of the Numbers tools.
I joined an archery club at the weekend, so excited to give the Cam a go there.
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
That Style PS is a great little tool. I have one in the same color as well.
-
Nice haul, Crunchie 8) :salute: :like: :like:
-
How did you order through Leatherman HK? @Crunchie64
Sent fra min M2002J9G via Tapatalk
-
How did you order through Leatherman HK? @Crunchie64
I was looking at Squirt ES4 stuff a few months ago and the site came up.
It was a surprise that I could order from it, but all I did was add it to my basket, then used ApplePay. It honestly couldn’t have been any easier.
When you choose Apple Pay it knows your address and automatically works out shipping costs, so you can play about with different tools to see how much it’ll cost altogether.
They had Squirts, Styles, Year of the Monkey Charge, loads of unusual things.
The Style, Cam, and others took twelve days to arrive.
-
Nice haul, Crunchie! :tu: I'd go for a few of the BTN tools if I didn't have a sneaking suspicion that shipping would be far more than the cost of the tools.
-
Thanks @Crunchie64
It doesn't look like they are shipping to Sweden :facepalm:
Sent fra min M2002J9G via Tapatalk