Multitool.org Forum
Tool Talk => Leatherman Tools => Topic started by: Chako on May 14, 2014, 01:54:21 AM
-
When I first saw the Skeletool, I was intrigued by its design. It sure didn't look like any Leatherman before it, and that carabiner was intriguing. What I didn't know at the time, it would spawn many different tools that are related to the venerable Skeletool in design. So let us take a closer look at the Skeletool family...
The Skeletool first came out in 2007. It was designed to be a minimalist tool that would be easy to carry. With that said, there were two versions of the Skeletool. An all stainless steel Skeletool, and a slightly upscale half carbon fiber Skeletool CX. One would think the addition of the carbon fiber would impart a weight savings of some sort...but no such luck. The CX just gives you a different look. The other major difference, other than looks, was the knife blade. The plain Jane Skeletool featured a 420 Stainless steel blade. The Skeletool CX featured a 154CM stainless steel blade.
Before I go on, I must also add this bit of information. There are two variants of the Stainless and carbon fiber Skeletools. The original Skeletool featured a plain blade, and the original run of the CX featured a serrated blade. This is important because the following year, Leatherman changed the blade styles on both Skeletools. The newer run of the Skeletool features a serrated blade, and the newer run of the Skeletool CX now feature a plain blade. This distinction may only be important to collectors
Here are two Skeletools. Both show the generational differences in the blade. The older Skeletool is below the newer Skeletool is on-top.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4822small_zps8188f87d.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4822small_zps8188f87d.jpg.html)
The next photo shows the more upscale Skeletool CX. You can see the carbon fiber patterning on one half of the tool. Here, the older serrated blade is above the newer plain edged blade.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4823small_zps551c9656.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4823small_zps551c9656.jpg.html)
Of interest to the collector is this rare error. They mislabeled a Skeltool CX as a Freestyle CX.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4825small_zpsf21ee4c1.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4825small_zpsf21ee4c1.jpg.html)
Here is a very nice gold plated Skeletool from Texas Toolcrafters. I must admit, the gold plated Skeletool is very beautiful. The photo does it no justice.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4826small_zps0aa4a4b2.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4826small_zps0aa4a4b2.jpg.html)
Now for the weirdest official Skeletool. How about one geared towards snowboarders. Meet the Skeletool SX. The odd thing about this tool is the overly large and exterior diamond coated file, which I can only imagine, might do some damage to clothing or well...anything it rubs against. The file is located on the right handle as seen in this next photo.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4827small_zps61730137.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4827small_zps61730137.jpg.html)
Now for some collector material. Leatherman has painted quite a few Skeletools. Now with all painted tools, they do tend to wear badly as the paint does come off of them easily. However, they do make for a striking tool. You just have to handle them carefully. As far as I know, there are two US retail exclusives, and 3 UK exclusives. The Red Skeletool is an exclusive from REI. The Green Skeletool is an exclusive from Cabela's to celebrate their 50th anniversary. The Blue, Orange, and Yellow all come from the UK market. As far as I know, all of these are hard to come by these days.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4828small_zps899a19a5.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4828small_zps899a19a5.jpg.html)
In 2009, Leatherman came out with an even more cut down Skeletool, called the Freestyle. Much like the Skeletool, it also came in two versions. The Stainless steel Freestyle, and the fancier carbon fiber Fresestyle CX. Yes, there is a trend here. It also splashes onto the blades as well. The stainless steel Freestyle features a serrated blade. The Freestyle CX feature a plain edged blade that is also 154CM. Amazingly, Leatherman has now discontinued the Freestyle CX, but still currently produces the Freestyle. As far as I know, there are no generational differences that are seen in the Skeletool. All Freestyles come with a serrated blade. All Freestyle CX come with a plain edged blade.
The Freestyle is a bit light on the toolset. It eliminated that nice and useful carabiner which also doubled as a bottle opener found in the Skeletool. More unforgiving is the lack of a removable bit driver. Here we see a Freestyle.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4819small_zpse96ccdd4.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4819small_zpse96ccdd4.jpg.html)
In this next photo, we see two Freestyle CX models above, and a Freestyle holding the bottom position. These are very minimalist tools, and quite a few people view the Skeletool as a minimalist tool to begin with.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4820small_zps81226e78.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4820small_zps81226e78.jpg.html)
Here are the tools flipped over. Note that these do come with a pocket clip. Also note that the middle tool is a factory error. The bottom half is not black like the Freestyle CX above it. In other words, this is sort of half a Freestyle CX and half a stainless steel Freestyle. Something of interest to a collector.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4821small_zps4687e41a.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4821small_zps4687e41a.jpg.html)
In 2010, Leatherman came out with a military specific tool that immediately got my interest. I have a few Multitaskers and other military specific tools. One could say I have a thing for military specific multi-tools. It was nice to see Leatherman enter the fray. I am talking about the MUT (Military Utility Tool). I love this tool so much it has found a place on my side when I go motorcycling.
Now the MUT comes in 3 variations. You have the stainless steel version. You also have the Black Oxide version (military loves black non-reflective tools). There is also an EOD specific MUT that features a C4 spike and a military spec cap crimper which looks a lot like the ones found on the Gerber MP 600 tools for years now.
Here is the stainless steel MUT. Note the specific tools designed for AR rifle maintenance. The biggest thing I like about these tools are the extra long bit drivers and the hammer/V cutter.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4812small_zps25ec4a16.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4812small_zps25ec4a16.jpg.html)
Here is the even sexier BO MUT. I must add that the firearm punch is removable. The threaded stubb will mate nicely with an OTIS cleaning kit. Not only that, there are special screw in on the sides of the plier head for such a purpose.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4813small_zps9458076c.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4813small_zps9458076c.jpg.html)
Even more hard core is the MUT EOD. Note the addition of a C4 spike instead of the firearm punch. The plier head also feature the cap crimper.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4814small_zpsa2baa918.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4814small_zpsa2baa918.jpg.html)
And here are all 3 MUT versions together.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4815small_zps1b31977f.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4815small_zps1b31977f.jpg.html)
Also in 2010, Leatherman decided to shrink the Skeletool and came out with the Leatherman Style CS. The Style CS resembles a miniature Skeletool in shape. In fact, these tools are rather cute all told. As with the naming convention of Leathermans other smaller type tools, the CS stands for Scissors. Hence, the Style CS is a more stylish Micra in some ways.
The following year, Leatherman changed the scissors for a pair of pliers, and called the new version the Style PS. P stands for pliers, S for Scissors. In the following photo, you can see both a Style CS (bottom) and Style PS (top). Both tools feature a removable pair of tweezers that slide on the side of the handles. You can see them nestled just above the miniature carabiner. Note the Style PS does not have a knife blade, making it supposedly more airline travel safe.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4816small_zps3a2ba19d.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4816small_zps3a2ba19d.jpg.html)
Now of interest to collectors, the Style CS was produced in a nice variety of painted colours. Here we see a Red, Blue, Pink, and Green Style CS along with the standard black, and a special run MT.O. The Pink features a breast cancer ribbon on the blade, and is part of Leatherman's Pink Program which featured 3 multi-tools, a Style, Style CS, and Micra.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4817small_zps17152ae3.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4817small_zps17152ae3.jpg.html)
Speaking of special runs. Here are two MT.O tools in their presentation metal tins. When ordered, you could specify a specific number. Since the first Style CS came to me as #5, I made sure the second Style PS also was #5. I do not know the production numbers on these.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4818small_zpsd1ba937a.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4818small_zpsd1ba937a.jpg.html)
Also in 2010, Leatherman introduced a very small tool simply called a Style. It was basically half of a Style CS, and was aimed at the Victorinox Classic camp. The tool proved to be a bit fiddly, and the nail nick locations only exacerbated the situation. Consequently, this tool enjoyed a short production run and is now recently discontinued. These came in 4 anodized colours. Red, Black, Pink, and Blue. Of interest to the collector is a special Pink Style with the breast cancer ribbon. This was a series of 3 tools to promote breast cancer awareness, and which Leatherman called their Pink program. Yes, I do have two reds. I was thinking of EDCing one until I found out I couldn't live with the difficulty of tool extraction. By the way, these all feature removable tweezers.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4829small_zps9dd8ce7b.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4829small_zps9dd8ce7b.jpg.html)
Well that concludes a look at the Skeletool family. As you can see, it is a very diverse family at that.
Here is a bonus shot showing the size differences. From left to right, MUT, Skeletool CX, Freestyle, and Style CS. The Style is half that of the Style CS.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_4830small_zps69ab42f5.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4830small_zps69ab42f5.jpg.html)
What I have, by the numbers:
12 Skeletool/Skeletool CX
3 Freestyle/Freestyle CX
4 Mut/MUT EOD
8 Style CS/PS
6 Style
33 Total
-
Yet another great show, thanks for sharing!! I love the look of the Skeletool CX, and think it would fit right in since I have a BO MUT and a Style CS. A PE one has been on my want list for awhile now, just haven't pulled the trigger on one. I do wish they made a BO version of it though.
Sent from my iPad using Tapatalk
-
A BO version would be cool.
-
I am elated to see a thread such as this. Finally some love for the Skele. I feel like the minimalist design is underrated because of the lack of :climber:. I EDC this thing everywhere. I even wear it on the couch for the occasional beer. I wish I had known my red Skele was a limited edition and I would've taken better care of it (probably). I also own the MUT and I'm in love with both. Also. Anyone know if I can special order the 154CM blade anywhere to fit onto my Skele?
-
(http://i1302.photobucket.com/albums/ag137/toddh6/skeletool_zpsbfec01b3.jpg)
Skeletool from the movie "Oblivion" with Tom Cruise.
-
I have a special place for the Skeletool. I especially enjoyed your write-up, comparisons and pictures on this one Dan :tu:
-
I am elated to see a thread such as this. Finally some love for the Skele. I feel like the minimalist design is underrated because of the lack of :climber:. I EDC this thing everywhere. I even wear it on the couch for the occasional beer. I wish I had known my red Skele was a limited edition and I would've taken better care of it (probably). I also own the MUT and I'm in love with both. Also. Anyone know if I can special order the 154CM blade anywhere to fit onto my Skele?
Nope, only if you harvest it from a Skele CX or a now disco'd Freestyle CX.
Skeletool from the movie "Oblivion" with Tom Cruise.
That was a one of. Made by the movie crew for the purposes of the movie if I remember correctly. Leatherman themselves didn't know about it until someone posted a screenshot of it on their FB. :D
And yes, BO Skele ... :dd:
I'd be up for one of those. :drool:
Thanks for the write up and pics, Chako. :cheers:
-
Enjoyed reading this Chako. Good stuff. :cheers:
One thing (no offence): Your bonus size comparison picture has no Style at all.
I took the liberty of adding a pic with the Style, Style CS, and Skeletool CX:
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/t1.0-9/733935_10152367634631664_563176935_n.jpg)
-
Umm...where is the Freestyle and MUT in yours. :D
But point well taken. :salute:
-
I love my Style CS. It's my favourite scissors tool. :D
-
I enjoyed this, thanks for posting. :)
-
Speaking of discontinued Freestyle CX, I saw several (around 10 or so) at the Navy Exchange at Pearl Harbor discounted for about $45 a couple of months ago. Didn't get it at the time as I already have a "barely used" Skeletool CX that I got off ebay under that price shipped. Haven't been back to see if they still have any left to get as it would still be a pretty good deal for a brand new one.
-
Another enjoying read.
thanks Chako
-
Also in 2010, Leatherman introduced a very small tool simply called a Style. It was basically half of a Style CS, and was aimed at the Victorinox Classic camp. The tool proved to be a bit fiddly, and the nail nick locations only exacerbated the situation. Consequently, this tool enjoyed a short production run and is now recently discontinued.
Wow I did not know that Chako.
I aquired one last year.
I think you are spot on with its competitive target (ie Vic Classic) and it is a bit fiddly - But I really like it. Bit of a shame I'd say.
Great review - as always, of course - And great place to learn stuff - Thanks
PS. Is the MUT really part of the Skeletool family?? ???
PPS. Whilst they might be a bit 'lightweight' physically and interms of their toolset - They are real eye/head turners - especially for non multitool people - They are very attractive and cool looking and mine is always getting comments!!
-
Huntsman. I tend to lump them with the Skeletool...simply because they look like one on steroids.
-
So, will you be adding any of the new custom Texas Tool Crafters "ceramic" coloured Skeletools to your collection ?
I liked the look of the green and purple ones so I've bought them (along with the 24K gold one) :facepalm:
-
Not yet.
-
the green one in particular is gorgeous... just sayin'. :pok:
:D
-
(http://i1302.photobucket.com/albums/ag137/toddh6/skeletool_zpsbfec01b3.jpg)
Skeletool from the movie "Oblivion" with Tom Cruise.
Showing a White Skeletool saved the film. :tu:
Then,after that scene, I wished I used my Skeletool CX to save the rest of the film. By cutting the power cord to the projector :whistle:
-
Huntsman. I tend to lump them with the Skeletool...simply because they look like one on steroids.
Yep - Good point - Now I can see the photo with all of them (for some reason it was not appearing last night) - I can see the resemblance.
Maybe not immediate family (mother, father brother, sister etc)
More of a big, ugly, older, cousin :o
-
I love my latest Skeleool .
I've owned at least one for quite a few years , and they are my favourite for around the house on weekends . Work is reserved for my faithful Surge .
(http://i943.photobucket.com/albums/ad271/harronek/b0b810ccdabbe35c2cac11df2de1c5c6_zps2788a264.jpg)
Ken
-
Re: the Style CS and airline friendliness.
There are bunches of them in state here, where they sell off the confiscated items from the TSA, so it seems they are not so airline friendly after all.
-
Since the Tom Cruise Oblivion Skeletool picture made it in this thread, thought I'd post this cameo.
The Skeletool makes a cameo in a cinematic scene from the video game Call of Duty Black Ops II.
I found it amusing, going to use it as my avatar.
-
Since the Tom Cruise Oblivion Skeletool picture made it in this thread, thought I'd post this cameo.
The Skeletool makes a cameo in a cinematic scene from the video game Call of Duty Black Ops II.
I found it amusing, going to use it as my avatar.
And don't forget. Tom Cruise did use a Skeletool CX in "Mission Impossible: Ghost Protocal"(hummingbird vision required) to open the computer cabinet.
(Thank God for a pause button)
-
Since the Tom Cruise Oblivion Skeletool picture made it in this thread, thought I'd post this cameo.
The Skeletool makes a cameo in a cinematic scene from the video game Call of Duty Black Ops II.
I found it amusing, going to use it as my avatar.
And don't forget. Tom Cruise did use a Skeletool CX in "Mission Impossible: Ghost Protocal"(hummingbird vision required) to open the computer cabinet.
(Thank God for a pause button)
well, I guess I will watch this Mission Impossible again. I own the bluray, and never noticed.
-
Since the Tom Cruise Oblivion Skeletool picture made it in this thread, thought I'd post this cameo.
The Skeletool makes a cameo in a cinematic scene from the video game Call of Duty Black Ops II.
I found it amusing, going to use it as my avatar.
And don't forget. Tom Cruise did use a Skeletool CX in "Mission Impossible: Ghost Protocal"(hummingbird vision required) to open the computer cabinet.
(Thank God for a pause button)
well, I guess I will watch this Mission Impossible again. I own the bluray, and never noticed.
That scene after he climbs up to the computer room. He opens that computer cabinet. If I can see it on DVD, blu-ray should be easier for you :tu:
-
I got a new sibling added to the family
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/10494542_10153246576296664_8286914503610500716_n.jpg)
From small to big; Leatherman Style, Style CS, Style PS and a Skeletool CS, the one they all spawned off from.
-
:tu:
-
May I assume there are two versions of the pliers?
One on left is older, newer one on right?
I heard reports of earlier pliers (1st gen.?) being weak, did the improvement on 2nd version strengthen up the pliers?
-
Yes, Leatherman did see fit to ever so slightly beef up the pliers on the recent Skeletools. With that said, there isn't much difference between the two in terms of metal thickness...but then again, maybe the plier head didn't need much beefing up.
Now as far as generation thing goes. The first generation had a serrated knife blade for the Skeletool CX and a plain blade for the Skeletool. Second generation switched that around. I have no idea when Leatherman made the plier head change...I can view it as a third generational change. Anyone have any idea when they changed the plier head?
-
:popcorn:
I'd like to know when also. I have 2 recent skeletools with nothing to compare them to. I can only assume they have the larger pliers on them.
-
I have to caution here...the larger pliers are not that much larger. Best way to id them is to look for that larger circle near the pivot point on the older pliers. Both could have Leatherman on them as well. All of mine do.
-
Kind of odd that Tom Cruise uses a Skeletool in two movies. I wonder if it is something HE likes to incorporate into his work? Maybe he carries one?
Seems unlikely to be a coincidence.
-
Maybe it's real name is the Scientolotool...
-
I bought mine for display, due to seeing it in Oblivion. Then, 3-4 months ago, i noticed MTs are now available for oho - and now i have a Freestyle, Skeletool, OHT, Surge, and one MP 600.
Maybe it was really a Scientolotool. :rofl:
May i ask which one the second movie was?
-
Maybe it's real name is the Scientolotool...
:ahhh :rofl:
-
So we're saying the large circle near the handle pivot on the plier head represents the newer, beefier pliers? If so, mine from circa 2011 has that, also has the Leatherman text.
-
I understand it the way that the olders have the big circle near the pivot.
My pliers are both from tools bought this summer, and they don´t have the big circle.
-
I bought mine for display, due to seeing it in Oblivion. Then, 3-4 months ago, i noticed MTs are now available for oho - and now i have a Freestyle, Skeletool, OHT, Surge, and one MP 600.
Maybe it was really a Scientolotool. :rofl:
May i ask which one the second movie was?
Oblivion and Mission Impossible Ghost protocol
-
Oblivion and Mission Impossible Ghost protocol
Thanks - i´ve never seen that flik.
-
Oblivion and Mission Impossible Ghost protocol
Thanks - i´ve never seen that flik.
Which one?
-
Mission Impossible Ghost Protocol
-
Mission Impossible Ghost Protocol
well, you maybe half a quarter of a second of view time of the Skeletool. very quick.
-
Mission Impossible Ghost Protocol
well, you maybe half a quarter of a second of view time of the Skeletool. very quick.
"Hummingbird Vision" works great when you know what to look for :tu:
-
I knew where it was, and I had to watch that scene 3 times to catch it, and by it I mean a flash of the carabiner turning 90 degrees :rofl:
-
I knew where it was, and I had to watch that scene 3 times to catch it, and by it I mean a flash of the carabiner turning 90 degrees :rofl:
And it gives you that warm fuzzy smile that the wife will never understand! :whistle: :D
-
Thanks for this post, Chako, the Skeletool has a special meaning for me as it is the first LM I ever got :tu:
-
I knew where it was, and I had to watch that scene 3 times to catch it, and by it I mean a flash of the carabiner turning 90 degrees :rofl:
And it gives you that warm fuzzy smile that the wife will never understand! :whistle: :D
I knew I wasn't the only one with that issue! My girlfriend has often looked at me as if I'm crazy, when I suddenly yell out "Leatherman ***" when we're watching a movie. xD
-
The Skeletool shown on Leatherman site must be a prototype.
-
Good eye kamp
I hope that we get some singal pics to put in this thread soon.
-
I think I've totally come around on my view of the Skeletool. It's completely replaced my Kershaw Select Fire when I'd carry that alongside a bigger tool, and has managed to sneak into my 'light' EDC surprisingly often; where I carry it along with the Crosscut that's on my key-chain. Carrying the Robertson and Phillips bits, that gives me (counting the Crosscut) a good selection of Phillips, flat, and Robertson bits on hand as well as Scissors/Knife/Pliers and is pretty pocketable.
So I guess I'd like to apologize to the Skeletool :). Originally I thought it just wasn't the tool for me, but I now realize it works so well with the Crosscut that the two of them make for a great light EDC.
I do wish the base Skeletool didn't have the combination blade, but that's a pretty minor gripe.
Dem
-
Agree, I team Skeletool up with Micra so far they are working very well for me.
(http://forum.multitool.org/index.php?action=dlattach;topic=49951.0;attach=131317;image)
-
I love them, Grant it their a little smaller then normal mt, but their not designed for everyday use.. Here's my collection, sorry the pic sucks.. I want to swop the two blades and put the 50/50 on the larger one, but I only have one wrench that will fit :-\ JR
(http://img.photobucket.com/albums/v196/mrssabrina/328bd4d275d3705dd3de27cacecdafef_zps75333960.jpg)
-
After taking this photo for another thread, I noticed that the newer Skeletools have a wider pocket clip compared to the older manufactured ones. Just thought that was an interesting observation. Likewise, in this photo, I have added 4 out of 5 Texas ToolCrafter ceramic Skeletools. Missing the orange version.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo002/IMG_6466small_zps198e7552.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo002/IMG_6466small_zps198e7552.jpg.html)
-
Excellent Review!!! wish I had read this before I bought my leatherman Freestyle. I'm off to the store to buy a style PS now.
Thanks for the info I learned a lot about the skeletool lineup.
I bough a Skeletool and the Freestyle I was hoping the freestyle would carry like a small skeletool and find that the pointed handle pokes the hell out of me in daily pocket carry. It bugged me so much I even made a video about it! I will get the Skeletool PS and do a video review on that too, I think it will fill the role I had intended to use the freestyle for.
https://www.youtube.com/watch?v=gWLrRUWBMEk
GearsNTools
So many great MT's I might just have to carry them all!
-
Nice review. I have a freestyle that is a nice light carry.
-
I finally got my first SkeleTool. I always loved the design but I doubted its usefulness.
It was love at first sight. I had a Supertool, a Ganzo, an Albacete, an MP400, a Crosscut and a Spirit... all good tools, but none made it into EDC... they just didn't have the "je ne sais quoi" to replace my Swisschamp.
The Skelly did... so nice to deploy, sharp, accurate and so very cool looking. Really do like it... it oozes quality. Thinking of a Freestyle and a Style PS now.
-
Knife is maybe the most used thing on a multitool, and skeletool in knife mode is the best "multitool knife" I know of in existence, in term of comfort.
Of course it is a moot point if you carry a dedicated folder.
-
Knife is maybe the most used thing on a multitool, and skeletool in knife mode is the best "multitool knife" I know of in existence, in term of comfort.
Of course it is a moot point if you carry a dedicated folder.
If you carry a MT that´s also a good folder with a good sized blade ...... there is no longer any need to carry the extra weight of a dedicated folder. And that´s even better for edc.
-
Knife is maybe the most used thing on a multitool, and skeletool in knife mode is the best "multitool knife" I know of in existence, in term of comfort.
Of course it is a moot point if you carry a dedicated folder.
If you carry a MT that´s also a good folder with a good sized blade ...... there is no longer any need to carry the extra weight of a dedicated folder. And that´s even better for edc.
My 10 Benchmade knives are in sleep mode because that.
-
I noticed there are two tiny holes on all your Style, Style CS blades, but the ones i see in store currently do not have them...Just an observation.
-
Skeletool Damascus Blade
Skeletool Afganistan Edition
FreeStyle Prototype
-
Skeletool Damascus Blade
Skeletool Afganistan Edition
FreeStyle Prototype
Those are sweet. :tu:
-
Chako, I noticed the Skeletool SX only come with one bit (Phillips #1-2 & #3), there is no bit storage under the file, correct?
Let's look at the diagram on LM's site. :think:
Not only a bit storage is shown in handle, the blade is also marked 154cm. ???
(http://demandware.edgesuite.net/aamv_prd/on/demandware.static/Sites-leatherman-Site/Sites-master/en_US/v1417800891181/featureDiagrams/Product_diagrams_features_skeletool_sx.png)
-
Yes, looks like they used a regular Skeletool art piece. You are correct, the Skeletool SX does not have an addition bit, or the storage for it, let alone a higher graded steel blade.
-
Skeletool Damascus Blade
Skeletool Afganistan Edition
FreeStyle Prototype
Those are sweet. :tu:
Being made by Leatherman? Or Texas Tool Crafters?? :think:
-
.. I want to swop the two blades and put the 50/50 on the larger one, but I only have one wrench that will fit :-\ JR
All you need is one Torx driver. I swapped blades today using one Torx screwdriver.
-
Epic thread thanks Chako
-AdmSlc
-
I have a burning desire to build a red Skeletool CX, using the carbon fiber side plate, and the red handle housing from the REI edition. I think the red and the CF would look really cool together.
-
Thanks. It was part of a series...that you can check out in my signature. :salute:
-
I have a burning desire to build a red Skeletool CX, using the carbon fiber side plate, and the red handle housing from the REI edition. I think the red and the CF would look really cool together.
The red Skeletools are around on eBay reasonably often, but they usually attract higher prices. Be aware that the red paint is easily chipped.
-
I have a burning desire to build a red Skeletool CX, using the carbon fiber side plate, and the red handle housing from the REI edition. I think the red and the CF would look really cool together.
The red Skeletools are around on eBay reasonably often, but they usually attract higher prices. Be aware that the red paint is easily chipped.
Take a look into Texas Tool Crafters. They offer a lot of different color schemes and can probably build a red cx as well. Their prices aren't the lowest but you get what you pay for kinda thing.
You can find then on Etsy (take my man card), Amazon, and they probably have a website.
I have a burning desire to build a red Skeletool CX, using the carbon fiber side plate, and the red handle housing from the REI edition. I think the red and the CF would look really cool together.
-
Been thinking about a Skeletool to compliment my Vic Ranger so I have pliers but not sure what is out there choice wise! My only concern is to get a full plain blade and both bits.
In this case, do I have to get a CX one or is there other options/pricing?
Thx.
-
Been thinking about a Skeletool to compliment my Vic Ranger so I have pliers but not sure what is out there choice wise! My only concern is to get a full plain blade and both bits.
In this case, do I have to get a CX one or is there other options/pricing?
Thx.
Someone will have to teach the both of us the acronyms for all the straight blades.
But as far as I know as long as it's the direct variation of a Skeletool it should come with the 2 bits.
-
Been thinking about a Skeletool to compliment my Vic Ranger so I have pliers but not sure what is out there choice wise! My only concern is to get a full plain blade and both bits.
In this case, do I have to get a CX one or is there other options/pricing?
Thx.
Someone will have to teach the both of us the acronyms for all the straight blades.
But as far as I know as long as it's the direct variation of a Skeletool it should come with the 2 bits.
Didn't we just make it clear that Skeletool SX only has one bit? ;)
-
Been thinking about a Skeletool to compliment my Vic Ranger so I have pliers but not sure what is out there choice wise! My only concern is to get a full plain blade and both bits.
In this case, do I have to get a CX one or is there other options/pricing?
Thx.
Someone will have to teach the both of us the acronyms for all the straight blades.
But as far as I know as long as it's the direct variation of a Skeletool it should come with the 2 bits.
Didn't we just make it clear that Skeletool SX only has one bit? ;)
Not clear enough :p
Don't buy that one. The file clip is a turn off anyway.
This is why I joined! Always learning!
-
OK, Skeletool SX only has one bit!!! :surrender:
-
I have a burning desire to build a red Skeletool CX, using the carbon fiber side plate, and the red handle housing from the REI edition. I think the red and the CF would look really cool together.
The red Skeletools are around on eBay reasonably often, but they usually attract higher prices. Be aware that the red paint is easily chipped.
Take a look into Texas Tool Crafters. They offer a lot of different color schemes and can probably build a red cx as well. Their prices aren't the lowest but you get what you pay for kinda thing.
You can find then on Etsy (take my man card), Amazon, and they probably have a website.
I have a burning desire to build a red Skeletool CX, using the carbon fiber side plate, and the red handle housing from the REI edition. I think the red and the CF would look really cool together.
I could probably get the parts to do it myself easily enough. I've got a bit of an "in" with Leatherman...
-
I have a burning desire to build a red Skeletool CX, using the carbon fiber side plate, and the red handle housing from the REI edition. I think the red and the CF would look really cool together.
The red Skeletools are around on eBay reasonably often, but they usually attract higher prices. Be aware that the red paint is easily chipped.
Take a look into Texas Tool Crafters. They offer a lot of different color schemes and can probably build a red cx as well. Their prices aren't the lowest but you get what you pay for kinda thing.
You can find then on Etsy (take my man card), Amazon, and they probably have a website.
I have a burning desire to build a red Skeletool CX, using the carbon fiber side plate, and the red handle housing from the REI edition. I think the red and the CF would look really cool together.
I could probably get the parts to do it myself easily enough. I've got a bit of an "in" with Leatherman...
Sounds like I need to save your name..........
-
Skeletool Damascus Blade
Skeletool Afganistan Edition
FreeStyle Prototype
Those are sweet. :tu:
Being made by Leatherman? Or Texas Tool Crafters?? :think:
Leatherman
-
Skeletool Damascus Blade
(http://forum.multitool.org/index.php?action=dlattach;topic=52199.0;attach=134796;image)
Skeletool Afganistan Edition
FreeStyle Prototype
I somehow missed this post. :think:
Congrats on finding the prototype Freestyle. :tu: I still think the Freestyle would have been a much better tool if they had went with this design. Oh, well. :shrug:
Also, the Afganistan Skele is a new one to me. When was it made and in what numbers? Did they issue them or was it some kind of commemorative thing?
-
This Tool was to sell me one of the forum member with comments that this is a prototype for the troops in Afghanistan.
-
This Tool was to sell me one of the forum member with comments that this is a prototype for the troops in Afghanistan.
Ah, one of the prototypes from the lot, I remember now. :D The seller was a CAD designer for Leatherman if I remember correctly. :tu: So I'm guessing those didn't go into production or we would have seen more of them by now.
-
Skeletool Damascus Blade
Skeletool Afganistan Edition
FreeStyle Prototype
Those are sweet. :tu:
Being made by Leatherman? Or Texas Tool Crafters?? :think:
Leatherman
Got the link for them? :gimme:
-
This Tool was to sell me one of the forum member with comments that this is a prototype for the troops in Afghanistan.
Ah, one of the prototypes from the lot, I remember now. :D The seller was a CAD designer for Leatherman if I remember correctly. :tu: So I'm guessing those didn't go into production or we would have seen more of them by now.
Yes, seller - CJ Goodrich
-
OK Firstly a question for you Skelly experts/fans.
Why does the Skelly have two springs on one side, and three springs on the other side of the plier head??
See piccie below
I noticed the Juice is the same - But that makes sense - As there are three tools on the other end of one set of springs (the flat heads) and two tools on the end of the other set of springs (cross head and lanyard ring).
But for the Skelly there are no tools - So why the difference in springs ?? ???
Secondly seeing the photo reminded me that the notch in the bits did not quite align/fit with the bit retention spring/latch on my Skelly - So I had to make the notch a bit bigger with a file - As you can see in the photo.
The bits in the bit kit seemed to have the same problem.
Anyone else find this??
Finally
Congrats on finding the prototype Freestyle.
I still think the Freestyle would have been a much better tool if they had went with this design.
Oh, well.
If they had gone with that design wouldn't it have just been a Skelly ???
-
Answer to the last question: freestyle was suppose to be a budget Skelly, then they decided to cut it down even further by removing driver and carabiner altogether.
-
Ah - Thanks Kampf - Very interesting
Now I understand that photo and enki's comment
You always get the answer on MTo :)
Current range/Freestyle is best I reckon as there is more variety in the options.
Although the Freestyle is not the one for me - just too few tools.
-
You are welcome, Freestyle is not for me, you are right, too few tools. Screw driver is one of the most Frequently needed tool I can not understand why they would decide to go such route. Also Freestyle is less comfortable to carry comparing to Skelly, the pointy bottom constantly reminds you its present.
-
It is my understanding that all the Skeletools shown have the "combo" blade no matter what color handles they have and that the CX is the only one with a full plain edge.
Is that true?
Has anyone had any issues using the "combo" blade and wished they has a plain edge?
-
Me!!
Don't like comboe edges. I like one or the other.
-
Same here. I like to use the base of the blade way too often.
This summer I'm ordering every color Skelly From TTC. In which case all of them will have their blades swapped. (My income is extremely seasonal)
-
David lewin's design portfolio
(http://forum.multitool.org/index.php?action=dlattach;topic=52199.0;attach=195568;image)
http://www.lewinindustrialdesign.com/portfolio/leatherman/
-
Man, the concept sketches of multitools really gets me excited. Bummed, at the same time because usually the best ideas get left behind. Too bad leatherman strayed so far from these initial drawings. The main thing I dislike about the Skeletool is that it could be a lot more compact than it is. It would also be pretty easy to get some additional tools on its frame.
Still, really fun looking. Good find!
-
Man, the concept sketches of multitools really gets me excited. Bummed, at the same time because usually the best ideas get left behind. Too bad leatherman strayed so far from these initial drawings. The main thing I dislike about the Skeletool is that it could be a lot more compact than it is. It would also be pretty easy to get some additional tools on its frame.
Still, really fun looking. Good find!
While I have some love for the Skeletool, my issue is with its size-to-utility ratio. Meaning it only really has 3 tools for being the same size as a Rebar. I just can't sell it to myself lately for an EDC. I even recently made the switch from the Style CS to the Micra because the micra has more tools and is smaller. And who doesn't want their gear to take up as little space as possible...
-
Man, the concept sketches of multitools really gets me excited. Bummed, at the same time because usually the best ideas get left behind. Too bad leatherman strayed so far from these initial drawings. The main thing I dislike about the Skeletool is that it could be a lot more compact than it is. It would also be pretty easy to get some additional tools on its frame.
Still, really fun looking. Good find!
While I have some love for the Skeletool, my issue is with its size-to-utility ratio. Meaning it only really has 3 tools for being the same size as a Rebar. I just can't sell it to myself lately for an EDC. I even recently made the switch from the Style CS to the Micra because the micra has more tools and is smaller. And who doesn't want their gear to take up as little space as possible...
Perfectly stated. I agree completely. I like to compare the Skeletool to my PPP, and the Skeletool weighs the same or more, but is severely lacking in utility by comparison. Even my Octane has more to offer for the same weight and similar bulk.
-
David lewin's design portfolio
(http://forum.multitool.org/index.php?action=dlattach;topic=52199.0;attach=195568;image)
http://www.lewinindustrialdesign.com/portfolio/leatherman/
Not feeling much love for this, sorry brother.
-
Skeletool is not a handyman's MT, maybe perfect for someone works in an office environment, where bigger better scissors are in no short supply, but knife, pliers and screw driver would be very convenient to have. And he won't need anything else.
It is a knife base MT, Think of it as a pocket knife with pliers and drivers as bonus then you will appreciate it more. I haven't held any other MT in knife mode as comfortable as the Skeletool.
It has more than 3 tools: knife, pliers, cap lifter and 4 sizes of drivers, that is 7 in my book.
It is a gentleman's MT 8)
-
I love a Skeletool Debate in the morning.
Was it Andrewbird (learherman factory worker) who said most the technicians carry skeletools?
Maybe because they have specific bags of tools for the job anyways.
Anyways, I believe the skeletool is perfect for both white collar and blue collar work.
-
Was it Andrewbird (learherman factory worker) who said most the technicians employees carry skeletools?
That is correct sir. And I was the one who asked that question.
-
Was it Andrewbird (learherman factory worker) who said most the technicians carry skeletools?
That is correct sir. And I was the one who asked that question.
I love it when a plan comes together lol
-
Lol :tu:
Be honest I felt the same way toward skeletool as sawman up until 10 months ago, since then skeletool is my most carried MT. Pair it up with a Micra they make a good team.
And I agree with Sawman, Micra is way more useful than Style CS.
-
Just saw a desert tan Skeletool in store.
(http://cdn6.bigcommerce.com/s-uc7p4kh2/products/2467/images/1436/5016-127_COY01_view1_1000x1000__14132.1445473965.1280.1280.jpg?c=2)
-
What store?
That looks great! To bad they didn't do it in BO.
-
They need to do it in plain-edge.
-
They need to do it in plain-edge.
Agreed.
-
I don't want to start the whole "Signal" debate in here, but even if I liked that tool I would have huge objections to the part/serrations. When will LM figure it out ::)
-
They need to make one with plain edge and in full sliver / stainless steel, a hammer at the cararbiner.
-
Lol :tu:
Be honest I felt the same way toward skeletool as sawman up until 10 months ago, since then skeletool is my most carried MT. Pair it up with a Micra they make a good team.
And I agree with Sawman, Micra is way more useful than Style CS.
+1
The Skeletool and the Micra make a killer-combo.
What the Skeletool is missing comes in the Micra (Scissors, micro driver, file, tweezers) there is very little redundancy and is very realistic urban EDC carry with pretty capable blade, pliers, scissors, drivers.
What´s possibly missing is an awl. There are two options to fix it in my opinion: Make an awl bit for the Skeletool or to file down the 2D philips of the Micra (or straight driver if you prefer).
-
I do love the SkeleTool. Amazing looks, nice ergonomics and the most useful tools.
Great OH folder, great plier and perfect companion to a Compact or a Classic.
And awl or a prybar would be nice to have and toothpick and tweezers could be easily integrated.
I traded my SS for a CX and love it even more.
However I carry a Spyderco daily these days so the redundancy would be too great so the Spydie gets priority... still the Skelly is my favourite Leatherman (the incoming Charge Al might change my opinion though...).
-
Always great to see new tools and get new information - Skeletool is really a goog looking tool :tu:
thanks for sharing
-
Lol :tu:
Be honest I felt the same way toward skeletool as sawman up until 10 months ago, since then skeletool is my most carried MT. Pair it up with a Micra they make a good team.
And I agree with Sawman, Micra is way more useful than Style CS.
+1
The Skeletool and the Micra make a killer-combo.
What the Skeletool is missing comes in the Micra (Scissors, micro driver, file, tweezers) there is very little redundancy and is very realistic urban EDC carry with pretty capable blade, pliers, scissors, drivers.
What´s possibly missing is an awl. There are two options to fix it in my opinion: Make an awl bit for the Skeletool or to file down the 2D philips of the Micra (or straight driver if you prefer).
:tu: my Micra has an awl
http://forum.multitool.org/index.php/topic,55311.msg968453.html#msg968453
-
Lol :tu:
Be honest I felt the same way toward skeletool as sawman up until 10 months ago, since then skeletool is my most carried MT. Pair it up with a Micra they make a good team.
And I agree with Sawman, Micra is way more useful than Style CS.
+1
The Skeletool and the Micra make a killer-combo.i
What the Skeletool is missing comes in the Micra (Scissors, micro driver, file, tweezers) there is very little redundancy and is very realistic urban EDC carry with pretty capable blade, pliers, scissors, drivers.
What´s possibly missing is an awl. There are two options to fix it in my opinion: Make an awl bit for the Skeletool or to file down the 2D philips of the Micra (or straight driver if you prefer).
:tu: my Micra has an awl
http://forum.multitool.org/index.php/topic,55311.msg968453.html#msg968453
That mod is perfect for a combo with the skeletool. Very clever.
-
Notice the size difference?
(http://forum.multitool.org/index.php?action=dlattach;topic=52199.0;attach=250802;image)
-
They need to make one with plain edge and in full sliver / stainless steel, a hammer at the cararbiner.
Ehhh? Maybe?
It's a light use tool.
Somewhere there are the shattered remains of a Skeletool that did not survive the
Sea Monster Assessment Criteria for Knives, Drivers And Tools (SMACKDAT).
I feel tempting folk with a "hammer" surface would not increase its survivability.
-
Notice the size difference?
(http://forum.multitool.org/index.php?action=dlattach;topic=52199.0;attach=250802;image)
Wow. I didn't realize they have changed the size (or is it a forced perspective trick). Which is current production? Maybe I need to go back and read the whole thread. One of my biggest complaints was the size of the Skeletool, at 4 inches, still seemed excessive for a pocket tool. So if they shrank it a bit, that would be awesome. Also, sweet paint job - cookies and creme. Texas Tool Crafters or a do it yourself job?
-
Notice the size difference?
(http://forum.multitool.org/index.php?action=dlattach;topic=52199.0;attach=250802;image)
Thank you for contacting Leatherman Tool Group, Inc.
After checking with our design team, just to make sure there was not some new Skeletool coming out, he did say it is just an optical illusion!
Best Regards,
-
:twak: :twak: :twak:
-
Ah, but their is a new Skeletool coming out... wait, nevermind. Leatherman have removed the mentions of Skeletool RX (and Knifeless Rebar) from their site. At least for now?
-
Yes, Leatherman did see fit to ever so slightly beef up the pliers on the recent Skeletools. With that said, there isn't much difference between the two in terms of metal thickness...but then again, maybe the plier head didn't need much beefing up.
Now as far as generation thing goes. The first generation had a serrated knife blade for the Skeletool CX and a plain blade for the Skeletool. Second generation switched that around. I have no idea when Leatherman made the plier head change...I can view it as a third generational change. Anyone have any idea when they changed the plier head?
I have quite a few Skeletools and have looked at many since they came out . it would seem that the Plier head change was made at the same time as the blade change.or pretty close.
-
I really want to like the Skele but the way it feels in my hand when using the pliers just didn't gel well.
-
I really want to like the Skele but the way it feels in my hand when using the pliers just didn't gel well.
I tend to abuse my hands a bit so this is not a concern for me, but I honestly think if you stick within the limits of the tool the grip is at worst uncomfortable.
I don't carry a bit in the driver, only a Wave bit in the handle.
Why they didn't apply that to the Freestyle (so you only loose the carbiner) I couldn't guess - I would buy that!
-
Man, the concept sketches of multitools really gets me excited. Bummed, at the same time because usually the best ideas get left behind. Too bad leatherman strayed so far from these initial drawings. The main thing I dislike about the Skeletool is that it could be a lot more compact than it is. It would also be pretty easy to get some additional tools on its frame.
Still, really fun looking. Good find!
While I have some love for the Skeletool, my issue is with its size-to-utility ratio. Meaning it only really has 3 tools for being the same size as a Rebar. I just can't sell it to myself lately for an EDC. I even recently made the switch from the Style CS to the Micra because the micra has more tools and is smaller. And who doesn't want their gear to take up as little space as possible...
Perfectly stated. I agree completely. I like to compare the Skeletool to my PPP, and the Skeletool weighs the same or more, but is severely lacking in utility by comparison. Even my Octane has more to offer for the same weight and similar bulk.
At the same time utility doesn't necessarily equal tool count.
I use the blade 8 out of 10 times I reach for the tool and having a one hand opening good blade on a pocket clipped tool in stead of a blade that needs 3-4 manouvers to dig out including de-clumping other tools is more utility to me than having a strap cutter and a mediocre file.
Also the driver is quite sturdy, not having a fulcrum and the beer opener is best in class.
-
I completely understand about weight-to-tool ratio, in fact, I have neglected to carry my Skeletool in the past for the same reason. I think the ergonomics make it appealing to me lately and that clip which makes it ride very nicely in the pocket.
Also, I do make good use of the bit driver and I realized that while it does not have as many onboard tools/implements as other MTs, that I also don't really use a lot of those other tools most of the time.
So I decided to give the Skele another chance and have been enjoying it so far. I've also been carrying my MP600 in a sheath :D
Most importantly, this is why it's nice there are so many MTs available to choose from and keep changing it up.
:multi:
-
I think the skeletool is great, yes the pliers are smaller but think of it, none of leatherman or gerbers are truly designed to do automotive or construction, no mater how big, yeah the jaw will fit on some of the jobs, but Their more for hobby or around the shop/house use, thus why everyone breaks them so much. Heck go back to a sak, I did, but if you need a pair of pliers all the time, get a good pair of 6" and a sak, yeah there 2" longer then a Multitool closed, but you just tripled the jobs you can do! Heck what's that leatherman sheath, the one that you can store the tool either open or closed? Get or make something like one of those, put the pliers in then slide the sak between the handles and close it up!
JR
-
I was at my local hardware store looking at one in the case when a clerk approached me who I knew previously from our local Boy Scout Troop. He handed me his Skeletool and said he loves it, especially for his job at the store, opening boxes and doing handiwork. I have to say I was taken by the looks and feel of the Skeletool, and wouldn't mind having one myself! The carabiner and the interchangible bit/screwdriver really seemed handy. I could definitely see this on a hiking trip or an EDC. I love its lack of weight for sure.
-
I love the Skeletool, but I have the capacity in my EDC system for heavier tools, so I don't carry mine as often.
But for people into light EDC, it is amazing.
-
I bought one for my dad for Christmas. I had never seen one in person, so it was smaller than I thought it would be. It feels smaller than its dimensions listed on the website.
I was also disappointed to see that I had to upgrade to better steel to get a plain edge, but for his purposes I think the serrated will be ok. He does not sharpen his own knives.
What I do like about it is the quickness with which its few tools can be deployed. The driver is my most frequently used tool, and it is near instant to deploy with the skeletool. I think he will like it, and honestly I kind of want one for myself now.
OP your review helped me decide on this model for his needs. Thanks for the time.
-
A dark green Skeletool given away with a purchase from Leupold Optics product September 2015
(http://www.survivalknife184.com/forums/skeletool/leupold-2.jpg)
-
I started out way back carrying the original PST. Eventually TIG welded a pocket clip on it. I didn't wear belts back then...
EDC'd it for years and then added the original Wave to my drawer. EDC'd it until about 9 years ago. My new job I took nine years ago was not Wave holster on pocket friendly. Several years ago I got the first gen Skeletool. Been carrying it since. Though I did get "busted" at work due to the shiny pocket clip. So I called Leatherman to see if I could order the black clip from the CX.
Gal said they did not sell those parts separately, but sent me one for free. The clip is so skinny it doesn't really help, but it was a nice gesture by Leatherman. I also wish they'd make a BO version....
Edit.... I also wish the needle nose part of the pliers were more "Wave-ish", or rounded. I personally prefer the longer, rounded Wave needle nose.
Sent from my Nexus 7 using Tapatalk
-
I just received Leatherman's newest Skeletool model...the Skeletool RX. I had to buy this from eBay Australia as Leatherman is not making this RX available on their Leatherman.CA web site. The image is there, but it only states "unavailable" at the time of this writing. I hope that Leatherman USA sees fit to allow Canadians full access to their inventory in the future.
The Skeletool RX is aimed squarely at the first responders out there. The RX does sport some differences from the normal Skeletool. I must say, the whole package appears to be somewhat lackluster to me. First off, you get a nice Cerekote orange paint job. The orange is just a tad deeper than the European market orange Skeletool. At least, the Cerekote should wear a lot better than the European version which was notorious for having the paint wear off quickly.
On top of the new finish, Leatherman has included a special knife blade for the RX. It is special in that the serrations almost go right to the tip, Normal skeletool knife blades are only partially serrated. Mind you could also spring for a Skeletool CX which features a plain edge blade. For those history buffs, the first gen Skeletools had the PE and serrated blades switched over on the Skeletool and Skeletool CX.
The third unique thing about the RX is the included Leatherman flat drive bit with a dedicated carbide glass breaker. I looked on the Leatherman USA site, and could not find any replacement glass breaker driver bits for sale. So either they haven't revamped their web site, or you are out of luck if you lose your special driver bit. You also get the usual extra flat driver bit stored in the handles, as with all other Skeletool models out there.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2116small_zpsanvo7gju.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2116small_zpsanvo7gju.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2117small_zpsi5e6j7bg.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2117small_zpsi5e6j7bg.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2118small_zpslkciuoqg.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2118small_zpslkciuoqg.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2119small_zpsvxnduxfc.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2119small_zpsvxnduxfc.jpg.html)
This is an interesting modification of the Skeletool for first responders. I am unsure if this model will be a hit. I am also unsure why the Leatherman website features removable carbide cutters, as my model clearly does not have this feature. The sad part is if they do come up with a removable carbide cutter version, I will have to get that for the collection as well...and the fun I had in getting this one...well...that will be something I won't be looking forward to in the future...if it does happen.
-
How about some bonus photos.
The Skeletool RX now resides a little off from the others due to room availability.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2124small_zps4uzjylxw.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2124small_zps4uzjylxw.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2125small_zpsmfia3848.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2125small_zpsmfia3848.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2127small_zpscutiv7dn.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2127small_zpscutiv7dn.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2128small_zpshgmlh3mi.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2128small_zpshgmlh3mi.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2129small_zpsre4l11sb.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2129small_zpsre4l11sb.jpg.html)
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_2130small_zps5srncqcc.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_2130small_zps5srncqcc.jpg.html)
-
Thanks for sharing the pics Chako :cheers: I am glad that they went full serrations on this model as I done get along to well with the combo blade :whistle: I do hope this model helps to save lives and that they see fit to sell it in Canada :D :cheers: :cheers: :cheers:
-
So many colors! :drool: I especially like the purple :) do you have the ones that came out for christmas? The sublime and denim?
-
;)
I just happened to get a RX as well today. I think the serrated blade is pretty awesome. I'll admit tho I am partial to serrated blades. It's pretty spendy for what you get tho. Gorgeous color IMO.
-
Sorry mrynnr, no I do not have those.
Nice RX Aloha007. :salute:
-
Holy Skeletool Batman! :D
Excellent pics that make me have small...... collection envy. ;)
-
Great read and pictures! Thanks for taking the time to share!
Sent from my iPhone using Tapatalk
-
The Skeletool RX is on my short list of tools I want to get.
Sent from my iPhone using Tapatalk
-
Wonder if anyone has any thoughts about this now :think: Different bunch of people active to an extent now and I would like to see pics of some different plier heads from different Skeletools :cheers:
-
Wonder if anyone has any thoughts about this now :think: Different bunch of people active to an extent now and I would like to see pics of some different plier heads from different Skeletools :cheers:
It's certainly been an interesting thread. :like:
-
Got one Chako doesn't have :ahhh
-
Yes...and I think I won't be able to get one of those either.
-
Yes...and I think I won't be able to get one of those either.
Always happy to help out a member.
Signal (https://www.galaxus.ch/de/s4/product/leatherman-signal-special-edition-19x-multi-tool-5908737)
Skeletool (https://www.galaxus.ch/de/s4/product/leatherman-skeletool-special-edition-7x-multi-tool-5908738)
Shipping ought to be around 25USD.
-
How much would the Skeletool be shipped? I registered to the website to see if they would ship internationally, and it gave me the error message of the country must be in Switzerland.....
-
How much would the Skeletool be shipped? I registered to the website to see if they would ship internationally, and it gave me the error message of the country must be in Switzerland.....
Its 20 or 25$ I think... bit depending on how much the final package weights. The pair might raise it to 30.
-
How much would the Skeletool be shipped? I registered to the website to see if they would ship internationally, and it gave me the error message of the country must be in Switzerland.....
Its 20 or 25$ I think... bit depending on how much the final package weights. The pair might raise it to 30.
How much for you to buy the tool before the shipping?
-
How much would the Skeletool be shipped? I registered to the website to see if they would ship internationally, and it gave me the error message of the country must be in Switzerland.....
Its 20 or 25$ I think... bit depending on how much the final package weights. The pair might raise it to 30.
How much for you to buy the tool before the shipping?
Signal (https://www.galaxus.ch/de/s4/product/leatherman-signal-special-edition-19x-multi-tool-5908737)
Skeletool (https://www.galaxus.ch/de/s4/product/leatherman-skeletool-special-edition-7x-multi-tool-5908738)
CHF to USD is roughly 1:1
-
How much would the Skeletool be shipped? I registered to the website to see if they would ship internationally, and it gave me the error message of the country must be in Switzerland.....
Its 20 or 25$ I think... bit depending on how much the final package weights. The pair might raise it to 30.
How much for you to buy the tool before the shipping?
Signal (https://www.galaxus.ch/de/s4/product/leatherman-signal-special-edition-19x-multi-tool-5908737)
Skeletool (https://www.galaxus.ch/de/s4/product/leatherman-skeletool-special-edition-7x-multi-tool-5908738)
CHF to USD is roughly 1:1
Thanks. I didn't know the conversion rate.
-
Before LM released the additional colours in the Skeletool line up, in addition to the original Red, Yellow, Blue, Orange, CX PE, CX SE and basic S/S model. I was contemplating buying the RX. But the additional colours plus the outrageous price of the RX simply turned me off. I felt LM was simply milking the model too much and decided there were better things out there to spend my money on.
It also pretty much put me off LM altogether.....They seem to have gone the same way as Victorinox lately in releasing the same tool in various colour schemes.
I have little time for such greedy marketing tactics.
-
Felt in my lap today, blue looks gray on the pic
-
Great catch!
Leatherman has always catered to the collector. They used to date stamp their handles. They were the first (as far as I know) to make collector exclusive models starting with the 10th anniversary PST in gold.
For myself, I have personally taken a step back from my Leatherman collection due to space constraints in the past few years.
-
Any idea how to tweak a very minor up and down blade play when the knife is out for use? I have 2 that have firm action to open, click into place but a small up and down play against the stops.. Tried tighteneing the pivots, just made it hard to open but up and down play stayed the same.
-
I’d say that is just a feature of liner locks!