Multitool.org Forum
Tool Talk => Swiss Army Knights Forum => Topic started by: NorCalJim on March 18, 2017, 09:53:58 PM
-
Let's say that most of us have our "Go-to" SAK(s) nailed down. In my case, it's the Explorer for around the house and the Minichamp on my keychain for out and about. For most of us, having a single SAK or a rotation of SAKs does not keep us from wanting more. :)
So, what's on your wish list?
The Alox MInichamp leads my Alox wish list since I had to cancel my Amazon order after it got stuck in Limbo (marked "In stock" but hadn't shipped after a month).
The CyberTool 41 is high on my 91mm cellidor scale wish list. Getting a CT-41 will complete my CyberTool collection. Unfortunately, I was too exuberant and ended up with three CT-34s and two CT-29s. I had recently purchased the CT Lite and will probably sell/trade my excess CT-34s and CT-29 to end up with one of each in the series.
Thanks to photos by Poncho65 & FolderBeholder featuring the Camping logo, I definitely see a NOS or pristine sample in my future. My first choice would be a Ranger but a good Camper will do. This item will probably stay on my wish list for some time since I am willing to be patient in order to end up with one that gleams like Poncho65's.
How about your wish list?
-
Good idea for a thread Jim!
For me, I would like a custom Super Tinker with titanium scales, but that is far out of my price range.
A 1951 Soldier, exposed rivet 91mm of any kind, Wenger Tahara, Cybertool 41 and an Astronaut model Master Craftsman are my grails.
-
I would like a Buffalo horn SwissChamp, or a stag SwissChamp. or a 125th anniversary SwissChamp.
-
Sometime soon I'll buy a Pioneer X. A colored one. It'll replace the Climber that's half my current carry (the other half being a Carver). This means losing the corkscrew and t&t, so I'll be adding a Waiter to compensate. However much I try, I can't find any single SAK that satisfies all my wants and needs. Which isn't a problem really, since I like carrying more than one.
Disclaimer: subject to change without notice. And I'll be carrying one or two MiniChamps as well.
-
Sometime soon I'll buy a Pioneer X. A colored one. It'll replace the Climber that's half my current carry (the other half being a Carver). This means losing the corkscrew and t&t, so I'll be adding a Waiter to compensate. However much I try, I can't find any single SAK that satisfies all my wants and needs. Which isn't a problem really, since I like carrying more than one.
Disclaimer: subject to change without notice. And I'll be carrying one or two MiniChamps as well.
A Ti 91mm Carver with corkscrew and scissors sounds like what you need. ;)
-
A CT41 (MUST have it within a month, been drooling over it since november), Pioneer X sometime in the future, A 108mm model (preferably a GAK) and a OHO 111mm model.
-
At the moment my Wish list is a Rambler, a Compact, maybe with yellow scales, and an old Fisherman with proper metal inlay fish. I lost mine as a kid and that printed inlay just isn't the same ... *sighs*
-
Good idea for a thread Jim!
For me, I would like a custom Super Tinker with titanium scales, but that is far out of my price range.
A 1951 Soldier, exposed rivet 91mm of any kind, Wenger Tahara, Cybertool 41 and an Astronaut model Master Craftsman are my grails.
Good grails! I took a look at my rather modest wish list and realized that I had already purchased most of the SAKs that I wanted. I also realized that my list was more of what I was planning to get next rather than a true wish list. The CT-41 is not always available and does qualify as a wish. I recently passed on s Super Timer with a buy-it-now of just under $300. The Super Timer definitely goes on the list! There is a SAK that is on the top of my list but it is currently an active auction item on e-bay and I would rather not invite extra competition. :)
-
Any number of old and/or rare models that generally go for far more than I'm willing to pay! :ahhh
-
Now is the time to get a CT41. Just noticed a few days ago it's on amazon prime for $137. That saves a lot on shipping because you don't have to pay $30 for "expedited" Japan to USA shipping. "Expedited shipping" meant it took a week to get from Japan instead of three weeks and you got tracking info. Wish it was on prime when I got it last year.
CyberTool 41, rot transparent https://www.amazon.com/dp/B000MLQRCM/ref=cm_sw_r_cp_api_cqDZybHYGHQN0
-
I love threads like these, thanks NorCal for starting it!
As for my wish list:
I really want the Picnicker I bought (and have since been refunded for) as it never arrived, it was mint in box.
-
My Birth Year SAK...
Sent from my iPhone using Tapatalk
-
Recently felt like trying a thinner 91mm so maybe I'll make something like a scientist with scissors instead of the blade and combo tool.
-
For me, an exposed rivet Vic or Wenger, a '67 Soldier (birth year for me!), Apollo anniversary Master Craftsman and an Aloxplorer. I can always think of more when I see some of SAK Guy's or Folder Beholder's posts :D
-
Recently felt like trying a thinner 91mm so maybe I'll make something like a scientist with scissors instead of the blade and combo tool.
Does that mean a bladeless scientist? :D
-
Recently felt like trying a thinner 91mm so maybe I'll make something like a scientist with scissors instead of the blade and combo tool.
Does that mean a bladeless scientist? :D
*with scissors.
-
Recently felt like trying a thinner 91mm so maybe I'll make something like a scientist with scissors instead of the blade and combo tool.
Does that mean a bladeless scientist? :D
*with scissors.
:drool:
-
I will add another Outrider to keep new in box since it looks like the slide lock models will be discontinued.....
-
I will add another Outrider to keep new in box since it looks like the slide lock models will be discontinued.....
Meh, liner locks are stronger. >:D
-
Speaking of which... my wish list is all 111mm liner lock models... not so patiently waiting for them to start turning up here... Outrider and Workchamp XL are the highest priority...
(Also have two slide locks on the way as collection items before they go... Outrider and Adventurer)
-
Wow some great stuff on the lists peeps :o
Already had plenty on a list but now it is even longer :facepalm: :D
I would like some of the larger Swisschamps, a Farmer X (when they finally do ever come out) Master Craftsman, an older cellidor model (read that as several but not enough money :whistle: ) :D and I am sure if I think I could go on and on :ahhh
Neat thread :like:
-
Light up the Mag signal! Someone said Farmer X!
-
Dear Santa all I want for Christmas is,
Milasian Outrider
Indonesia OHT
Irish OHT
British RAF Hunter
South African Soldier
Dutch Air Force\Navy Master Craftsman ( preferably an early ALOX model)
Early Swiss Armee OHT
SMKW Master Gardener
Swisschamp XL
108mm Walther\Mauser
Brazilian camo Soldier
German Bund Rucksack
And that should get through till next year.
-
:facepalm: I want em ALL! :bnghd: :surrender: :doh:
STINKIN' :MTO:
:D 8)
-
:facepalm: I want em ALL! :bnghd: :surrender: :doh:
STINKIN' :MTO:
:D 8)
:rofl:
Pretty funny but true enough!
During the past three months, I have made a good sized dent in my personal "Want it all". :)
Surprisingly, I watched an e-bay auction for a CT-41 get away without bidding (patiently waiting for the right deal on new or excellent used). It's just a matter of time.
My mysterious "unnamed" item was a Swiss Champ XLT that I passed on when I noticed a scratch on the magnifier. I love the Swiss Champ and am intrigued by the higher models. The Swiss Champ XLT and XVAT are both on my wish list.
Meanwhile, I thought I would make some room on my wish list by booting the Alox Minichamp. I have two keychains corresponding to each of our cars and both are equipped with a Minichamp with more functionality than the Alox version. It just doesn't make sense to get the Alox Minichamp at this time.
Hovering in the background and not quite in wish list territory is the Wenger or Delemont Evolution 28 (and possibly 23 & EvoGrip S54).
I guess I want it all, one SAK at a time. :)
-
Light up the Mag signal! Someone said Farmer X!
Did someone mention Farmer X?
(http://i923.photobucket.com/albums/ad80/magentus2112/0965d1ce-2547-4184-85db-545ca36f547a_zps3wahzcmz.jpg) (http://s923.photobucket.com/user/magentus2112/media/0965d1ce-2547-4184-85db-545ca36f547a_zps3wahzcmz.jpg.html)
-
Meanwhile, back on Topic, I would like a Swisschamp or an XLT then I'd be a happy Mags :D
-
The CT41 mentioned before has just been ordered and should arrive later this week...
-
The CT41 mentioned before has just been ordered and should arrive later this week...
Sweet!
:popcorn:
-
The CT41 mentioned before has just been ordered and should arrive later this week...
Congratulations!
:popcorn:
-
The CT41 mentioned before has just been ordered and should arrive later this week...
Congratulations!
:popcorn:
Thanks! :cheers:
-
I have quite a list.. some of the mt/tool related list includes;
Explorer
Woodsman (one or the other)
Scientist
ESEE - 6
Klecker stowaway tools w phone case
Minichamp
Executive
Style PS
Copper plus scales
Copper olight (those little AAA ones)
A second Vic Spirit
... i could go on but I will stop here
-
Pfff, that'd be quite a list I guess. Let's see what I can think of from the top of my head:
- Excecutive
- SwissFlash
- WorkChamp
- Fisherman
- a SAK with a bail
- a Solo in very good condition
- 108mm GAK models
- Explorer
- Yellow scales
- Green scales
- a 58mm StayGlo
- SwissChamp SOS kit
-
Pfff, that'd be quite a list I guess. Let's see what I can think of from the top of my head:
- Excecutive
- SwissFlash
- WorkChamp
- Fisherman
- a SAK with a bail
- a Solo in very good condition
- 108mm GAK models
- Explorer
- Yellow scales
- Green scales
- a 58mm StayGlo
- SwissChamp SOS kit
Alox Solo or Safari Solo? They're both very nice. I can tell from experience.
The 108mm Safari Solo was my favorite while I worked in the fruit trade business.
The 93mm Alox Solo is my lunch knife / apple knife.
-
Alox Solo or Safari Solo? They're both very nice. I can tell from experience.
The 108mm Safari Solo was my favorite while I worked in the fruit trade business.
The 93mm Alox Solo is my lunch knife / apple knife.
The Safari Solo. I really, really like this knife.
At this moment I don't have any Alox models, though they should also be on my whishlist.
I have secret plans of building a custom SAK, with stone/acid washed tools. Or black anodised tools.
It's a plan for the future though. But It might as well be a black Alox. I recon that looks great with blacked out tools.
But those are just plans at the moment, I don't have any equipment yet. Have to build most of it.
-
The CT41 mentioned before has just been ordered and should arrive later this week...
Congratulations!
:popcorn:
The CT41 mentioned before has just been ordered and should arrive later this week...
Sweet!
:popcorn:
:mail:
(https://uploads.tapatalk-cdn.com/20170324/80c96f4f2bd36f9cadf5b7fa27c0d406.jpg)
-
The CT41 mentioned before has just been ordered and should arrive later this week...
Congratulations!
:popcorn:
[ :popcorn:quote author=Mechanickal link=topic=71176.msg1444273#msg1444273 date=1490098202]
The CT41 mentioned before has just been ordered and should arrive later this week...
Sweet!
:popcorn:
:mail:
(https://uploads.tapatalk-cdn.com/20170324/80c96f4f2bd36f9cadf5b7fa27c0d406.jpg)
[/quote]
More, show more! In other words, open, open, open. :drool: :popcorn:
-
The CT41 mentioned before has just been ordered and should arrive later this week...
Congratulations!
:popcorn:
[ :popcorn:quote author=Mechanickal link=topic=71176.msg1444273#msg1444273 date=1490098202]
The CT41 mentioned before has just been ordered and should arrive later this week...
Sweet!
:popcorn:
:mail:
(https://uploads.tapatalk-cdn.com/20170324/80c96f4f2bd36f9cadf5b7fa27c0d406.jpg)
More, show more! In other words, open, open, open. :drool: :popcorn:
[/quote]
(https://uploads.tapatalk-cdn.com/20170324/3fe957ff6892415666ee0a9d9633bb0a.jpg)
(https://uploads.tapatalk-cdn.com/20170324/b2b76a047e119417c88f259057208fbe.jpg)
(https://uploads.tapatalk-cdn.com/20170324/c19cf32707c3c08ab0b032be3bc14941.jpg)
(https://uploads.tapatalk-cdn.com/20170324/e1657aa1f9cd3c445cfc1bc94266df37.jpg)
Now I know what a nerdgasm feels like!
First ruby scales! :woohoo:
-
First ruby scales! :woohoo:
Were you opening the box with a Micra? :pok: Just kidding with you.
Nice CT41!
-
First ruby scales! :woohoo:
Were you opening the box with a Micra? :pok: Just kidding with you.
Nice CT41!
Rebar with wave pliers, as imaged.
Did so after dinner though! For once I enjoyed the tension of looking at the package and FINALY opening it afterworths.
Plus I might have kept some others at the edge of their seat? :whistle:
-
Let's see...
SwissTool. I am very satisfied with the Spirit, so I'll go heavy duty. Preferably the plus version, to see just how awesome the wrench set is.
Kershaw A100. It looks nice, and people swear by it. I got a Schrade TT USA and love it, so I'm looking for more models outside the big four manufacturers.
BuckTool. I like the curvy handles. It looks pleasing, and the price will only go up with time.
Bear & Son. I am curious to see how it fairs against other brands.
ParaTool. It's still available, and I kinda like the design.
CenterDrive. I would have two MP600s but Australia Post lost them. Thanks guys. I saw the CD in Bunnings, and liked the size (but not the price). I see no reason to buy a MP600 now that the CD exists, other than finding any for a good price.
JPST. I just want one for the collection, but they are rather expensive. This 'll have to wait.
Locksmith. Great tool selection. I don't have any 111mm with the file.
Garant Centurion. Or maybe a Nomad. I find it ludicrous that the only 111mm Plus Scales are commissioned to them. Hopefully Vic will come to her senses and offer them for their models in the future.
Juice KF4. Got a CS4, and I like the size. That corkscrew is in the way though. It sticks out too much. I would not mind it on it, but I'd rather have a flush handle.
Flair. Speaking of corkscrews, this model is intriguing. I'll snag one before they become impossible to find.
SuperTool. I got a 200 and 300, so it only makes sense.
Squirt E4. I have a P4 and a S4, so again, just to complete the set. Though I'd rather get the ES4. We'll see. Thankfully these are not too bad to find.
It's an ever growing-list. :facepalm:
-
Pfff, that'd be quite a list I guess. Let's see what I can think of from the top of my head:
- Excecutive
- SwissFlash
- WorkChamp
- Fisherman
- a SAK with a bail
- a Solo in very good condition
- 108mm GAK models
- Explorer
- Yellow scales
- Green scales
- a 58mm StayGlo
- SwissChamp SOS kit
Alox Solo or Safari Solo? They're both very nice. I can tell from experience.
The 108mm Safari Solo was my favorite while I worked in the fruit trade business.
The 93mm Alox Solo is my lunch knife / apple knife.
All that fruit looks a bit too healthy for me ;)
Would love a 2012 Damascus OHT.......but not for the silly prices they are selling for on eBay! :rant:
-
I've been eyeing a LCSAS Green Pioneer X for over a month! I literally look at the pictures of it every day. It's twice as much as a stock silver version, I guess that's what's holding me back. It sure is pretty though.
-
My Victorinox wishlust:
- 91mm Scientist
- 91mm Engineer
- 91mm master craftsman
- 91mm apprentice with plus scales
- 111mm Cowboy
- 111mm Master
- 111mm OH Locksmith
- 108mm pathfinder
My current grail project is a custom "electrical engineer"
- 84 mm frame. Red alox scales
- electricians blade/inline awl with backspring fine flathead in main layer
- magnifier/inline phillips in secondary layer
-Tom
-
For the moment I want a alox rambler and a pioneer x coloured one
Trimis de pe al meu SM-A310F folosind Tapatalk
-
I've got my mind set on some more 108mm models.
And after the 108mm Solo I'm curious about the 111mm Sentinel OH. It's not that expensive, so I might get a Sentinel soon.
-
I've got my mind set on some more 108mm models.
And after the 108mm Solo I'm curious about the 111mm Sentinel OH. It's not that expensive, so I might get a Sentinel soon.
Sounds like our minds are alike.
Just bought a 108 GAK online and was looking at a sentinel with clip...
-
Sometime soon I'll buy a Pioneer X. A colored one. It'll replace the Climber that's half my current carry (the other half being a Carver).
...
Well, I bought me a PX. Not a colored one, but standard silver. It's going to be a user anyway. At the moment, my wish list is empty !
-
Sometime soon I'll buy a Pioneer X. A colored one. It'll replace the Climber that's half my current carry (the other half being a Carver).
...
Well, I bought me a PX. Not a colored one, but standard silver. It's going to be a user anyway. At the moment, my wish list is empty !
That the one that you have been carrying for a week?
-
Sometime soon I'll buy a Pioneer X. A colored one. It'll replace the Climber that's half my current carry (the other half being a Carver).
...
Well, I bought me a PX. Not a colored one, but standard silver. It's going to be a user anyway. At the moment, my wish list is empty !
That the one that you have been carrying for a week?
Yes.
-
Sometime soon I'll buy a Pioneer X. A colored one. It'll replace the Climber that's half my current carry (the other half being a Carver).
...
Well, I bought me a PX. Not a colored one, but standard silver. It's going to be a user anyway. At the moment, my wish list is empty !
That the one that you have been carrying for a week?
Yes.
Making sure you like it before you say you bought it? :D :whistle:
-
Sometime soon I'll buy a Pioneer X. A colored one. It'll replace the Climber that's half my current carry (the other half being a Carver).
...
Well, I bought me a PX. Not a colored one, but standard silver. It's going to be a user anyway. At the moment, my wish list is empty !
That the one that you have been carrying for a week?
Yes.
Making sure you like it before you say you bought it? :D :whistle:
:rofl: Not exactly. Some parts of the time line may be missing here, but I'm sure I posted those in other threads. :D
-
Bumping the thread with a new wish list. I knew it wouldn't remain empty.
-
Only easy stuff, right? :D ;)
-
Only easy stuff, right? :D ;)
I don't know exactly what you mean by that. All of these should be easy to get, bar money.
-
Only easy stuff, right? :D ;)
I don't know exactly what you mean by that. All of these should be easy to get, bar money.
:doh:
I thought you had a 40's Vic on the list. I see that it's another manufacturer now.
-
A re-issue'd 84mm Small Climber/Salesman. It's all i want (or need) :cheers:
Com'on Vic... what are you waiting...? :twak:
-
I'm just at the starting point of my collection, so any SAK used or new is on my wish list, just can't seem to get enough to place into my rotation. Alox is also very nice.
-
I like backup and everything that is really in my day-to-day carry I gotta have in 3. Fortunately I got my prime EDC down but over the past year the Benchmade Mini-Griptillian has sneaked into my EDC, so I need 2 more.
New ones already available
- Victorinox Wine Master
New ones not yet available
- Victorinox CF Cybertool
- Victorinox USB drive
Old ones
- Bloody Wenger SGT Fix-It and/or SGT Shortix Plus
-
:facepalm: I want em ALL! :bnghd: :surrender: :doh:
STINKIN' :MTO:
:D 8)
Yeah, pretty much... and two of each, just to be sure!
:facepalm:
-
It's taken several years of exploration, but I've pretty much found what I want in terms of pliers based tools. I've also modded several to make them even better for me. Now I need to offload the surplus.
I'm not there with Swiss knives yet though. I have all the stock versions that I want, and have some mod fodder, but still need a few more parts to build the mods that I would like:
Wenger 85mm metal file and backspring
Wenger 85mm fully serrated blade
93mm scissors and backspring
Inline phillips drilled for doing the 93mm mod that places it opposite the openers.
84mm metal file and backspring (long shot, and not getting my hopes up)
Assorted materials for scales. This is already work in progress, and I have a good friend helping me out with some of them. I have also found suppliers for the rest once I get some funds to work with.
I'm planning on doing some folding knife mods too, and restoring a couple of old razors. Lots of ideas, no funds, erratic health, and everything will be done with minimal tools at my kitchen table. :D Should be fun.
I also need a 3/8"-16TPI bolt/set screw about 1.1/2" long. I'm assuming it's UNC, but don't have the means to verify :-\
-
SwissChamp XAVT or slightly smaller XLT. :D
May I borrow someone's XXLT plz >:D :gimme: :gimme:
-
My wish list at the moment:
Waiter Plus
Timekeeper
Scientist
-
Top5:
Cheese knife
Orange/Black 111mm scales & orange cord
Wait, that's not five is it? Nope, but this is it for the moment.
Recently I bought a Sentinel with the hope of swapping the scales for orange ones.
Sadly they are harder to come by than I thought.
-
Any number of old and/or rare models that generally go for far more than I'm willing to pay! :ahhh
You're not on your lonesome there !
I'm still looking for:
Original LM "catalogue" PSTs (both Cabela's "Sportsman's Pocket Multi-Tool" and the Early Winters' "Pocket Toolchest" version) at a price I'm prepared to pay
Orange LM Squirt (these do exist, but are very, very rare)
LM camo Juices (me and a zillion other MTo members looking for these)
Morley Plier-Knife (again, only at a non-stratospheric price)
Odd coloured Gerber Multi-Lites ( I have Black, Green, Purple/Pink) but other colours may exist.
Japanese LM Mini (seen photos, never heard of an actual tool in the wild).
Copy of LM Mini
Tiger Stripe SOGs ( I have a PowerLock)
First Production Run MTs ( I have Mr Pinchy, MP600, Multi-Lite, Al Mar 4x4 & Quickgrip, Buck 360 & 355, Case Ziplight, Smith & Wesson)
Prototypes of name brand plier-based MTs
-
I would like to try this one by Böker. Is it as good as Victorinox? Is it better than Swiza?
-
Good to see this topic still going! I checked my opening post and see that my wishes have been granted. :)
The CT-41 was a long shot and it seems that there were scores of others trying for it. After several months, I found one and snatched it up. I was also able to get an old stock NIB Ranger with the original camping logo and an old stock NIB Camper with foil stamped camping logo.
These days, I have some wish targets with BSA logos but am pretty happy with my collection.
:cheers:
Jim
-
Yellow Compact
Vic Evolution 14
Canadian Trekker NS
-
Nothing at the moment apart from 91mm stayglow scales
-
A silver Alox Tinker!
Rich
-
The Wenger Giant Knife. :climber: :)
-
I have a few items I'd love to have. Some of them are pretty commomn, some of them are discontinued and I'd probably never use them, but still...
-
Hands down MASTER ELECTRICIAN !!!!!! :gimme:
-
:like:
-
In my wishlist at the moment there are:
- Ranger grip 71 gardener
- Hercules
- A 1988 wenger swiss army knife
Especially the last. I found some auction online, one is, at the moment, around 30.- and i am really tempted (i guess it will go quite high, as it seems pretty unused). The problem is that i spent a lot of money this month already :D I don't know if i should try to get it or not :/
-
Dunno, but I haven't bought a SAK for a few months and I want something. I'm thinking knifeless Cybertool and something with a sheepsfoot blade... Might have to take a bunch of
victims donors down the garage and see what crawls out. >:D
-
After looking at the SAK Horn page...I have to have one of these. They are very nice looking! And if it came with a Damascus blade, oh yeah! :woohoo:
-
A 1976 birth year SAK in good condition :tu: :like:
-
And a Wenger Si Soldier in good condition :tu:
-
My wishlist currently still revolves around mods. Not necessarily the parts, but just the window of circumstance, and good fortune with the results.
The Mega84 V1 needs rebuilding as the V2
The Sheepsfoot Duke needs to become the Townie
The Mega74, Mega91, and Mega93 need creating
Brian needs a new suit
I appreciate that none of those will make much sense... yet ... and they'll all be several months in the making.
I also have a few other concepts that I'd like to play around with before setting my heart on specific goals.
-
How about both an 84 mm and 91 mm Recruit with an inline awl replacing the small blade, or a Spartan or Tinker with a sheeps foot blade replacing the small blade.
-
A one handed Centurion! :)
This ties in with the minimalism thread noted the other day... that's my minimal 111mm sak :)
-
My current and highly positive experience with a "two hand opening" (is this how you say it?) Centurion has put me on the lookout for a two handed Trailmaster/Trekker (I need a saw).
Why not a plain edge OHT? Because I want comfort when I'm sawing and I'm OK to go without OHO to achieve it.
A one handed Centurion! :)
This ties in with the minimalism thread noted the other day... that's my minimal 111mm sak :)
Sounds great! It's a fantastic knife, so why not issue a version that's quicker to open, too? :pok:
-
My SAK wishlist for the next few months:
- Pioneer X
- Executive
- Wenger Evogrip S16 (less preferred but more likely: Vic Evo S16)
- Spirit X
- A birthyear SAK (1980)
- I have two spare Exlorers, planning to have them modded into a Scientist and a Yeoman
- pretty low on the list, but at some point, just to have an 84 mm Alox too: Cadet
And after these? Actually, I'll be pretty happy with my collection at that point, but of course there are always something new/old/rare/nice one can long for... :)
-
...on the lookout for a two handed Trailmaster...
Feck it - just ordered one, heh! :D
-
My wish list:
Damast 2010
Damast 2011
Nespresso Appreggio
700 years Huntsman
Wenger FASS 90 Grünig and Elmiger in Green scales
Wenger S54 Left-hander
Black Beauties
SwissChamps: Tiffany, 500 Mio
and these 3 guys I never knew the name of
-
Nice list maxt :tu:
-
My wish list:
Damast 2010
Damast 2011
Nespresso Appreggio
700 years Huntsman
Wenger FASS 90 Grünig and Elmiger in Green scales
Wenger S54 Left-hander
Black Beauties
SwissChamps: Tiffany, 500 Mio
and these 3 guys I never knew the name of
I saw that Wenger on the first photo today...
-
I really want this Vagabond that is currently on eBay for $179 plus shipping and I cannot justify the cost for myself. :facepalm:
(https://farm2.staticflickr.com/1978/44974268271_8c6d2bf1d0.jpg)
-
I really want this Vagabond that is currently on eBay for $179 plus shipping and I cannot justify the cost for myself. :facepalm:
(https://farm2.staticflickr.com/1978/44974268271_8c6d2bf1d0.jpg)
179 is too much for that little guy
-
But it looks fantastic...
-
But it looks fantastic...
I don't disagree with you, but you can get an alox minichamp for what? 35 dollars?
-
35-40 Euro...
-
(http://www.sakwiki.com/show_image.php?id=2610)
-
I saw that Wenger on the first photo today...
Which one? )
-
I saw that Wenger on the first photo today...
Which one? )
The red 85mm...
-
(http://www.sakwiki.com/show_image.php?id=2610)
Is this the case you posted with your WC and SOS kit?
-
(http://www.sakwiki.com/show_image.php?id=2610)
Is this the case you posted with your WC and SOS kit?
No,this kit that is on my wish list,is made of Green Canvas.
The kit with the WC is black leather.
-
(http://www.sakwiki.com/show_image.php?id=2610)
Is this the case you posted with your WC and SOS kit?
No,this kit that is on my wish list,is made of Green Canvas.
The kit with the WC is black leather.
Green canvas...very nice. :like:
-
A 130 mm of some description , due to the really wonderfull saw ! And an XLT , probably with +Biancho G10 or Ti scales ! Just cause I can !
Best Regards ,
Chris
-
I saw that Wenger on the first photo today...
Which one? )
The red 85mm...
You meant this one on the attached photo? There is a small variation of this one to more common SwissRoller and Snowboarder: it has a thicker head. Maybe it is really small and insignificant feature, but I really want to complete it and it has been avoiding me (
-
Hey, yes it is that one with the bigger head. I can send you a picture- I bought that one that I saw yesterday and now I have two... I will compare them and post I picture...
-
Great! I am eager to see your pic!
You can resell one to me and earn something )
-
Hey, we can talk about it... let’s see the pics if it’s the right one
-
(https://i.imgur.com/Z6m0UHf.jpg)
(https://i.imgur.com/Z6m0UHf.jpg)
-
Looks good :like: :tu:
-
:cheers:
-
I really want this Vagabond that is currently on eBay for $179 plus shipping and I cannot justify the cost for myself. :facepalm:
(https://farm2.staticflickr.com/1978/44974268271_8c6d2bf1d0.jpg)
179 is too much for that little guy
Today it's $181, I know it's high and at one time I probably thought I was worthy of having it.
-
I really want this Vagabond that is currently on eBay for $179 plus shipping and I cannot justify the cost for myself. :facepalm:
(https://farm2.staticflickr.com/1978/44974268271_8c6d2bf1d0.jpg)
179 is too much for that little guy
Today it's $181, I know it's high and at one time I probably thought I was worthy of having it.
It is high...even alox MiniChamps are coming down it price. :popcorn:
-
I did buy the green alox Vagabond. These 3 are ones I'd like to have:
84mm Voyageur with Red Ribbed scales - would love to have this, but I do have a silver ribbed one.
91mm SwissChamp XL - this would complete my Victorinox big knife mini collection.
91mm Astronaut on front scale - I'd like it to go with my Shuttle knife.
-
My wish list:
Damast 2010
Damast 2011
Nespresso Appreggio
700 years Huntsman
Wenger FASS 90 Grünig and Elmiger in Green scales
Wenger S54 Left-hander
Black Beauties
SwissChamps: Tiffany, 500 Mio
Strangely enough, but my wish-list had some great changes. I did completed very important items, but of course new goals will require further efforts:
Damast 2010
700 years Huntsman
Red Alox OC 100 years of Swiss knifemaking 1891-1991
Wenger FASS 90 Grünig and Elmiger in Green scales
Wenger S54 Left-hander
Black beauty (the variation with square mark on the scales)
Tiffany SwissChamp
Qomolangma SwissChamp
Cybertool Beretta
Climber Swarovski
-
Wenger East Ranger
Victorinox Rangerwood Damascus
Victorinox Swisstool an older one with red lettering in mint condition.
A birthyear SAK in Alox.
Victorinox Garant 111mm with the blue scales
-
Strangely enough, but my wish-list had some great changes. I did completed very important items, but of course new goals will require further efforts:
Damast 2010
700 years Huntsman
Red Alox OC 100 years of Swiss knifemaking 1891-1991
Wenger FASS 90 Grünig and Elmiger in Green scales
Wenger S54 Left-hander
Black beauty (the variation with square mark on the scales)
Tiffany SwissChamp
Qomolangma SwissChamp
Cybertool Beretta
Climber Swarovski
Sounds like you have found great stuff :cheers:
I’m happy because i also found both Nespresso model from 2016 :tu:
-
:ahhh
A pic once in a while doesn't hurt :pok:
-
:ahhh
A pic once in a while doesn't hurt :pok:
What he said :salute:
-
The only thing I've got on my wish list at the moment is an 84mm fieldmaster small/artisan, preferably with a bail/shackle
-
This is what I desperately need. Never seen on sale
-
Only SAK on my wishlist atm is the compact. Just don‘t seem to be able to find a used one for a decent price.
-
I would like a 91mm Clipper with the red scales.
-
84 mm scissors so I can EDC them. Ideally an 84 mm Golfer. ::)
Other than that, a Soldier or old cross Pioneer with a bail. I have one with a key ring, so I can't complain too loudly.
-
My wishlist? Alox rambler. Apoc green. Second choice, orange Farmer...or apoc green, what the hell. But the Dream I Dare Not Even Dream? Black Beauty.