Multitool.org Forum
Tool Talk => Swiss Army Knights Forum => Topic started by: ToolJoe on June 03, 2014, 08:46:51 PM
-
I'm looking to see if anyone around here edc's a Super Tinker. Any feedback on them?
-
I got a Climber which is almost the same, but really, any SAK is good, it's just the tool load that has to suit you or not. I prefer having a SAK with the corkscrew, personally, but the backspring Phillips works well enough.
-
I love my Climber. The corkscrew indeed is handy, even for your shoelaces. I carry the Climber at work. When I'm free I EDC a Huntsman.
-
On and off...I really shouldn't need or want to carry any other SAK at work. Unlike a lot of folks,I do like the backspring Phillips,everything else is is spot,no redundancy!
-
One of my favorites to carry. In fact it was in my pocket yesterday and today. :tu: I've never had an issue with the backside Phillips, it's gotten me out of more than a few jams over the years. Just a good, basic SAK with no extra tools I'd rarely if ever have a use for.
-
Solid Sak for sure, I like the back side Phillips it lays flatter than the corkscrew, the down side is no micro driver.
Sak's rule !
-
I did EDC a Super Tinker for a while, it was my first SAK. I still have a Climber in my EDC rotation, usually on Saturdays. I'm not a big fan of the back phillips, but the tool selection is otherwise excellent. If you have no need whatsoever for a corkscrew or mini SD, the Super Tinker is perfection. :tu:
-
I carry mine regularly and if I'm honest it's really all the pocket knife / tool that I need. It has a useful set of tools that cover the basics for me especially when carried with a pair of pliers.
I switch around edc because I am a knife Knut , not because the Super Tinker lets me down.
Jim
-
I carried one off and on for quite some time and I too like the climber cause of the cork screw that can hold the eyeglass screw driver but then I swapped it out with the Explorer, which gives me the best of both worlds! I get the cork screw and still have a philips driver! :)
-
The Super Tinker is my perfect EDC! It has everything I need on a regular basis and nothing I don't need. The back side Phillips has never let me down. All of my 91mm SAKs have the back side Phillips (except my SwissChamp) as I have no use for the cork screw or mini SD.
I do carry a LM ST300 in my car if I need pliers.