Post by: Zed on May 09, 2014, 07:02:41 PM
Post by: jerseydevil on May 09, 2014, 08:31:03 PM
Post by: tosh on May 09, 2014, 08:34:34 PM
I just assumed there was and it was buried deep within the threads.
I got a fair few of them :D , but the group shot has already been posted elsewhere on here.
Still not to worry, I'm pretty certain Chako and Greg will soon turn this into a full blown encyclopaedia all about the venerable Gerber 600 :tu:
I wanna see pictures pictures pictures and more pictures please!!
Gotta love the mp600s!! :drool:
Post by: jerseydevil on May 09, 2014, 08:37:07 PM
Post by: Zed on May 09, 2014, 08:42:10 PM
Post by: jerseydevil on May 09, 2014, 08:48:46 PM
I couldn't find one :think:
Nor could I. We have the flicky Gerber club, but nothing 600-specific.
Post by: Toolslinger on May 09, 2014, 08:51:56 PM
Two custom MP600's.
SS one is my 'Urban Scout' and is used for in-city carry.
BO one is my 'Ranger Edition' and is carried in my woods kit.
Post by: tosh on May 09, 2014, 08:57:07 PM
Pretty certain J-sews did something a while back??
Found Gareth's mp600 show off thread
But I agree, the mp600 series is so vast it really does warrant its own Club - maybe it should be made a sticky?? :pok:
Post by: Zed on May 09, 2014, 10:54:24 PM
Post by: derekmac on May 10, 2014, 12:29:05 AM
Sent from my iPad using Tapatalk
Post by: jerseydevil on May 10, 2014, 12:56:42 AM
First up is my Pro Scout, which is probably my favorite multitool. This sucker has seen a ton of carry time and use, and has never for a second let me down. It's my go-to tank. :tu:
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2419_zps92c8c026.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2419_zps92c8c026.jpg.html)
Next up is another Pro Scout. The scissors on this one are marked Fiskars, the other one not. Notice (hard not to) it's red and black - NJ Devils colors! >:D This has been carried and used, but I'm afraid of damaging the red, which is just paint. Not that it would be difficult to patch up given what I do for a living......
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2418_zpsae9cb85a.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2418_zpsae9cb85a.jpg.html)
And last but certainly not least is a US Army issue BO MP600. No scissors, no saw coupler, but replaceable cutters, plain-edge blade, and one wicked serrated blade. Great tool, this has seen a fair amount of use in my hands as well.
(http://i1102.photobucket.com/albums/g448/Jerseydevil379/DSCF2422_zpse18660f4.jpg) (http://s1102.photobucket.com/user/Jerseydevil379/media/DSCF2422_zpse18660f4.jpg.html)
And there you have the 600 family as it stands right now. I can guarantee you that there will be more in the future. Blunt next I think......
Post by: derekmac on May 10, 2014, 01:15:41 AM
Sent from my iPad using Tapatalk
Post by: jerseydevil on May 10, 2014, 01:21:41 AM
Sweet 600's you have there Tom! :tu: I know if you get a BN one, you'll fall madly in love with it!! :D
There's one in my Amazon cart as of two minutes after I typed that. :D Next kickba-tip! I mean next tip ::) I get from a contractor at work it'll be mine.
Post by: JAfromMn on May 10, 2014, 03:04:48 AM
Sweet 600's you have there Tom! :tu: I know if you get a BN one, you'll fall madly in love with it!! :D
There's one in my Amazon cart as of two minutes after I typed that. :D Next kickba-tip! I mean next tip ::) I get from a contractor at work it'll be mine.
I'm in
I own 1 mp600 a blunt nose.
you better get one Tom. Seems indestructible.
Post by: kirk13 on May 10, 2014, 09:23:27 AM
I gifted my BW MP600 to my flat mate when he started hi rep job to keep in his van,or to dazzle any of his customers in the model shops.
It leaves me with a BO blunt nose and needle nose stainless,one of which Zed will be getting
Post by: gregozedobe on May 10, 2014, 10:16:18 AM
Still not to worry, I'm pretty certain Chako and Greg will soon turn this into a full blown encyclopaedia all about the venerable Gerber 600 :tu:
I haven't really focussed on MP600's, as the older Mr Pinchy's get most of my attention.
I do know that they came with a variety of plier heads and an even greater variety of tool loads.
Just looking at the plier head variants I think there are :
SS Needle Nose
SS Needle Nose "Archer" (special arrow nock crimper notch behind the pliers)
BO Needle Nose
BO Needle Nose EOD (cap crimper)
[ I've only seen SS EOD in a Gerber MP650, or MP600 EOD knock-offs ]
SS Needle Nose with replaceable wire cutters
BO Needle Nose with replaceable wire cutters
SS Blunt Nose
BO Blunt Nose
SS Blunt Nose with replaceable wire cutters
BO Blunt Nose with replaceable wire cutters
SS Extra long Needle Nose ("Fisherman" or "Technician")
Cable Cutters
Any omissions or errors in this list ?
Post by: Zed on May 13, 2014, 12:53:45 PM
Post by: jerseydevil on May 14, 2014, 01:45:09 AM
Post by: Zed on May 14, 2014, 11:02:27 AM
Very nice, Paul! :tu: Wait..... :think: You started the owner's club before you were actually an owner of one? :P
Yeah I was desperate to start a new club tom :facepalm:
Post by: sawman on May 23, 2014, 03:39:59 PM
(http://images2.snapfish.com/232323232%7Ffp83232%3Euqcshlukaxroqdfv9%3B2%3C%3Dot%3E3377%3D645%3D%3B25%3DXROQDF%3E263645733%3C256ot1lsi)
(http://images2.snapfish.com/232323232%7Ffp83232%3Euqcshlukaxroqdfv563%3Enu%3D4286%3E554%3E%3A34%3EWSNRCG%3D3545554%3A%3C8347nu0mrj)
(http://images2.snapfish.com/232323232%7Ffp83232%3Euqcshlukaxroqdfv%3B8%3B%3A%3Dot%3E3377%3D645%3D%3B25%3DXROQDF%3E2636457343256ot1lsi)
Post by: derekmac on May 23, 2014, 03:57:00 PM
Post by: sawman on May 23, 2014, 04:03:24 PM
Very nice MP600!! :tu:Thanks buddy! It's seen quite a bit of use although I've been carrying my Wave a lot recently.
Post by: ducttapetech on May 23, 2014, 04:04:00 PM
live from Nate's mobile
Post by: sawman on May 23, 2014, 04:09:47 PM
(http://img.tapatalk.com/d/14/05/23/3e5e8are.jpg)Nice BN you have there, gotta love those carbide cutters :salute:
live from Nate's mobile
Post by: Chako on June 06, 2014, 12:14:44 PM
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4301small_zps14cb4f11.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4301small_zps14cb4f11.jpg.html)
Post by: Zed on June 06, 2014, 01:15:25 PM
Count me in.
(http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4301small_zps14cb4f11.jpg) (http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4301small_zps14cb4f11.jpg.html)
:salute:
Mine outside yesterday,im sure there are more mp600 fans on here :tu: its a much better mt than i thought it was going to be, the wire cutters cut through nails pretty well,its mt go to mt at the moment :tu:
Post by: mechtec on June 08, 2014, 08:10:40 PM
Chaco's collection is astounding!!! :salute:
[imghttp://(http://i605.photobucket.com/albums/tt132/woodland9964/multitoolorg_zpsc25e6fc2.jpg) (http://s605.photobucket.com/user/woodland9964/media/multitoolorg_zpsc25e6fc2.jpg.html)][/img]
Post by: Freaver on June 08, 2014, 09:25:28 PM
Post by: Millhouse on June 08, 2014, 10:02:42 PM
Post by: Gareth on June 08, 2014, 10:40:05 PM
You get use to it. When I had an MP400, I used to just flick the pliers out, get the tool out that I needed and slide the plier head back in. Its a routine that you quickly get used to.
Exactly. The fact all the tools on the MP400/600 are really easy to fold out is a bonus as well.
Post by: jerseydevil on June 08, 2014, 11:29:19 PM
Sent from my SCH-S738C using Tapatalk
Post by: mrynnr on June 09, 2014, 08:05:05 PM
Post by: Zed on June 09, 2014, 10:07:48 PM
Thanks to a generous anonymous benefactor I am now a proud owner! Sent me a NIP one for FREE! Can I join the club? Gotta love MT.O and their very awesome members!
That's awesome, said a million of times but yes this site is amazing, pics of your mp600 and enjoy flicking :tu:
Post by: enki_ck on June 10, 2014, 12:21:18 AM
:sak:Thanks to a generous anonymous benefactor I am now a proud owner! Sent me a NIP one for FREE! Can I join the club? Gotta love MT.O and their very awesome members!
That's awesome, said a million of times but yes this site is amazing, pics of your mp600 and enjoy flicking :tu:
Very true. :cheers: And I have one of those on the way as a gift from a generous Texan member too. :mail:
Post by: rdub934 on June 20, 2014, 04:05:03 AM
http://www.gerbergear.com/Industrial/Tools/MP600-Bladeless_30-000952
I was going to make a new thread but since I am at work, the restrictions the gov't puts on our network won't allow me to.
Post by: captain spaulding on June 20, 2014, 04:39:59 AM
Has anybody gotten the MP600 Bladeless yet? I was just cruising around on Gerber's site and saw it listed. Anyways, pretty cool move on Gerber's part, good for travel (probably) and should be legal in UK etc...
http://www.gerbergear.com/Industrial/Tools/MP600-Bladeless_30-000952
I was going to make a new thread but since I am at work, the restrictions the gov't puts on our network won't allow me to.
I honestly had no idea these existed. Very cool! :tu:
Maybe this is the push Leatherman needs to make a bladeless Rebar. :whistle:
Post by: Gareth on June 20, 2014, 08:39:56 AM
Sadly I'm not sure we'll ever see a bladeless Rebar Cap. IIRC we believed the bladeless Fuse was pulled due to poor sales. Again, I'm not sure it was well marketed.
Bladeless multitools do need to be put front and centre in some markets IMO, we could debate the rights and wrongs of some national knife laws (again) but wherever you are a MT without a knife has to be a simple choice.
Post by: lowtech on June 20, 2014, 08:49:00 AM
After thinking about it (What else should I do on my desk, supposed to be working... ;)) I´d replace the can opener with the awl - or would that be against the no knife policy rules, too?
Post by: kirk13 on June 20, 2014, 09:00:57 AM
Has anybody gotten the MP600 Bladeless yet? I was just cruising around on Gerber's site and saw it listed. Anyways, pretty cool move on Gerber's part, good for travel (probably) and should be legal in UK etc...
http://www.gerbergear.com/Industrial/Tools/MP600-Bladeless_30-000952
I was going to make a new thread but since I am at work, the restrictions the gov't puts on our network won't allow me to.
Great news,but the link doesn't seem to be working :think:
Post by: Gareth on June 20, 2014, 09:08:36 AM
Has anybody gotten the MP600 Bladeless yet? I was just cruising around on Gerber's site and saw it listed. Anyways, pretty cool move on Gerber's part, good for travel (probably) and should be legal in UK etc...
http://www.gerbergear.com/Industrial/Tools/MP600-Bladeless_30-000952
I was going to make a new thread but since I am at work, the restrictions the gov't puts on our network won't allow me to.
Great news,but the link doesn't seem to be working :think:
that'll be Gerber's frustrating regional redirect. ::) When you click the link it'll transform into a .co.uk. Change it back to a .com and it'll work.
Post by: kirk13 on June 20, 2014, 09:28:37 AM
Got it on another US site. That tool load is identical to my MP600BW! Cool!
Ironic that its available in the US,but not here in the UK :facepalm:
Post by: Gareth on June 20, 2014, 12:16:19 PM
Didn't work :rant:
Got it on another US site. That tool load is identical to my MP600BW! Cool!
Ironic that its available in the US,but not here in the UK :facepalm:
I'd give it a chance, it does look like it's a new line. I do hope it becomes available soon (and at a good price) here. :)
Post by: powernoodle on June 20, 2014, 01:05:20 PM
Post by: Gareth on June 20, 2014, 01:13:05 PM
Post by: Zed on June 20, 2014, 04:47:06 PM
Didn't work :rant:
Got it on another US site. That tool load is identical to my MP600BW! Cool!
Ironic that its available in the US,but not here in the UK :facepalm:
I'd give it a chance, it does look like it's a new line. I do hope it becomes available soon (and at a good price) here. :)
Any working links or pics :salute:
Post by: Zed on June 20, 2014, 04:51:52 PM
Post by: super m on July 05, 2014, 03:39:15 AM
Can I join ? Here's my MP600 sport with my carry blade the mini tuff.
Brüder, die Brüdern Helfen
Post by: David on July 05, 2014, 03:43:48 AM
(http://img.tapatalk.com/d/14/07/05/pejajaba.jpg)
Can I join ? Here's my MP600 sport with my carry blade the mini tuff.
Brüder, die Brüdern Helfen
You sure can. Welcome aboard! :)
Post by: jerseydevil on July 05, 2014, 04:33:44 AM
(http://img.tapatalk.com/d/14/07/05/pejajaba.jpg)
Can I join ? Here's my MP600 sport with my carry blade the mini tuff.
Brüder, die Brüdern Helfen
Very nice. :tu:
Post by: super m on July 05, 2014, 05:14:59 AM
(http://img.tapatalk.com/d/14/07/05/pejajaba.jpg)
Can I join ? Here's my MP600 sport with my carry blade the mini tuff.
Brüder, die Brüdern Helfen
Very nice. :tu:
Thank you
Brüder, die Brüdern Helfen
Post by: Gareth on July 05, 2014, 11:39:17 AM
Post by: sawman on July 05, 2014, 02:02:00 PM
I like that mini tuff, never seen one before :drool:(http://img.tapatalk.com/d/14/07/05/pejajaba.jpg)
Can I join ? Here's my MP600 sport with my carry blade the mini tuff.
Brüder, die Brüdern Helfen
Very nice. :tu:
Post by: Freaver on August 27, 2014, 09:48:31 PM
(http://i1280.photobucket.com/albums/a497/FreaverDK/2014-08-26142321_zps08cbd8da.jpg)
So far my only Gerber-tool. I didn't really think I'd get along with it, due to it being alot bigger than what I've carried so far and the fact that all tools are on the inside, but so far I really like it. Especially the flicking. :D
However, when I tried to make a cut earlier today, the pliers got misaligned. It didn't make the cut, and I didn't expect it to, I was just trying to get a feel for how solid and comfortable the tool is.
(http://i1280.photobucket.com/albums/a497/FreaverDK/2014-08-27213817_zps60ee02f1.jpg)
Has any of you ever experienced this? The pliers still slide freely in the handle and when I take the plier head out of the handle, I can't see any damage at all, except the misalignment. It won't interfere with my use of the tool, it just annoys me...
And while we're at it... When the pliers are all closed, like in the picture, they're pretty hard to open; most of the time, I end up using both hands on the handles. Are they supposed to be like that or should they just move freely, as soon as they're out of the handle?
Post by: sawman on August 27, 2014, 10:23:29 PM
Post by: haja.maideen.988 on September 02, 2014, 03:30:29 PM
It has serve me well.
Post by: sawman on September 02, 2014, 03:35:06 PM
hi, I own the Gerber 600. It is the first multi tool that I bought.Welcome to the club :D
It has serve me well.
Post by: David on September 02, 2014, 05:37:39 PM
Wanting to join as well.
(http://i1280.photobucket.com/albums/a497/FreaverDK/2014-08-26142321_zps08cbd8da.jpg)
So far my only Gerber-tool. I didn't really think I'd get along with it, due to it being alot bigger than what I've carried so far and the fact that all tools are on the inside, but so far I really like it. Especially the flicking. :D
However, when I tried to make a cut earlier today, the pliers got misaligned. It didn't make the cut, and I didn't expect it to, I was just trying to get a feel for how solid and comfortable the tool is.
(http://i1280.photobucket.com/albums/a497/FreaverDK/2014-08-27213817_zps60ee02f1.jpg)
Has any of you ever experienced this? The pliers still slide freely in the handle and when I take the plier head out of the handle, I can't see any damage at all, except the misalignment. It won't interfere with my use of the tool, it just annoys me...
And while we're at it... When the pliers are all closed, like in the picture, they're pretty hard to open; most of the time, I end up using both hands on the handles. Are they supposed to be like that or should they just move freely, as soon as they're out of the handle?
If you were trying to cut hard wire it proably made a burr which will misalign the pliers. The burr can be filed out and the pliers should return to normal. :)
Post by: Freaver on September 02, 2014, 06:07:49 PM
If you were trying to cut hard wire it proably made a burr which will misalign the pliers. The burr can be filed out and the pliers should return to normal. :)
Thanks for the tip; I'll try it out tomorrow. :)
Post by: haja.maideen.988 on September 04, 2014, 01:03:20 PM
and that is very useful for me. I used it to cut fishing line. :drink:
Post by: cedricada on September 22, 2014, 06:31:01 PM
Post by: kirk13 on September 22, 2014, 06:33:03 PM
I would like to join this association. Here is my Blunt Carbide 600, and a Crucial adopting a submissive pose to the more industrial tool.
Very appropriate :salute:
Welcome to MTo :2tu:
Post by: Gareth on September 22, 2014, 06:50:11 PM
Post by: sawman on September 22, 2014, 07:28:44 PM
Post by: cdv1962 on September 23, 2014, 01:58:45 AM
Post by: eddie1115 on September 23, 2014, 04:24:26 AM
(http://tapatalk.imageshack.com/v2/14/09/22/771379d53ecc7534b1fef21283a882d4.jpg)
Post by: Higgins617 on September 23, 2014, 05:28:19 AM
Post by: kirk13 on September 23, 2014, 07:14:34 AM
My first tool was/is a MP600. I still have it, though shes in a bad way now. Probably the worst looking example out there :-\. Still though, I came to appreciate the industrial ruggedness and it survived being in the hands of a foolish kid for quite a few years mostly in tact.:worthless:
Post by: Higgins617 on September 23, 2014, 07:31:03 AM
My first tool was/is a MP600. I still have it, though shes in a bad way now. Probably the worst looking example out there :-\. Still though, I came to appreciate the industrial ruggedness and it survived being in the hands of a foolish kid for quite a few years mostly in tact.:worthless:
Oh geez, I'm actually afraid to post it for fear of what the Gerber junkies may do to me. Next time I'm home I'll snap a few pictures of the old girl.
Post by: Goatlord666 on September 24, 2014, 01:51:51 AM
Post by: Gareth on September 24, 2014, 06:07:02 PM
My first tool was/is a MP600. I still have it, though shes in a bad way now. Probably the worst looking example out there :-\. Still though, I came to appreciate the industrial ruggedness and it survived being in the hands of a foolish kid for quite a few years mostly in tact.:worthless:
Oh geez, I'm actually afraid to post it for fear of what the Gerber junkies may do to me. Next time I'm home I'll snap a few pictures of the old girl.
Don't worry, we've not got a reputation for lynching folks. Honest. >:D
:D
Post by: Goatlord666 on September 25, 2014, 02:25:36 AM
Post by: Gareth on September 25, 2014, 05:24:22 PM
Did Gerber ever release a pro-scout with carbide cutters?
Absolutely. :) There seems to have been a fairly small run of blunt nosed Pro Scouts with cutters, but the standard head with cutters seems to be much more common.
Post by: Goatlord666 on September 25, 2014, 08:31:17 PM
Sent from my Cruize W280 using Tapatalk
Post by: zoidberg on September 26, 2014, 03:07:21 AM
Did Gerber ever release a pro-scout with carbide cutters?
Absolutely. :) There seems to have been a fairly small run of blunt nosed Pro Scouts with cutters, but the standard head with cutters seems to be much more common.
That would be the one I want. :ahhh
Post by: Goatlord666 on September 27, 2014, 12:06:08 AM
Sent from my Cruize W280 using Tapatalk
Post by: zoidberg on September 27, 2014, 12:26:09 AM
Ebay has 3 more for sale!
Sent from my Cruize W280 using Tapatalk
Linkage? :pok:
Post by: Goatlord666 on September 27, 2014, 12:33:39 AM
Sent from my Cruize W280 using Tapatalk
Post by: Mr Biriyani on September 27, 2014, 02:20:26 PM
Post by: JBW1 on October 08, 2014, 03:05:33 AM
Fitted it with a simple pocket clip mod
Gotta say I'm getting addicted to the flikn
Post by: ducttapetech on October 08, 2014, 12:03:14 PM
Nate
Post by: AdmSlc on October 30, 2014, 06:24:46 AM
I haven't owned a full size Gerber MT in quite a while, I'm excited to see how it goes. :multi:
http://www.otistec.com/pc_product_detail.asp?key=3B4235E87C8C4990800AE119FA8F45DC (http://www.otistec.com/pc_product_detail.asp?key=3B4235E87C8C4990800AE119FA8F45DC)
Post by: AdmSlc on October 30, 2014, 08:24:06 PM
-AdmSlc
Post by: Freaver on October 30, 2014, 11:05:21 PM
Either way, I'd try and contact Gerber - maybe send them an email with pictures. As far as I've heard, their customer service is reasonably good. :)
Post by: ducttapetech on October 31, 2014, 02:02:16 AM
Nate
Post by: zoidberg on October 31, 2014, 02:08:51 AM
Post by: bobbaero on October 31, 2014, 08:19:10 PM
Post by: Freaver on October 31, 2014, 08:25:30 PM
Post by: captain spaulding on October 31, 2014, 09:19:01 PM
Post by: derekmac on November 01, 2014, 01:16:07 AM
Sent from my iPad using Tapatalk
Post by: AdmSlc on November 01, 2014, 03:24:54 AM
-AdmSlc
Post by: captain spaulding on November 01, 2014, 03:42:44 AM
I was able to use the metal file one my Wave to fix the uneven grind on the plier head. All is well, I'll chalk that one up to a fluke.
-AdmSlc
Well done. Now you do not have to return it or wait for a replacement.
Post by: AdmSlc on November 01, 2014, 03:47:24 AM
Agreed. I'm glad I got this MP600, it has been too long since I've had a proper Gerber.I was able to use the metal file one my Wave to fix the uneven grind on the plier head. All is well, I'll chalk that one up to a fluke.
-AdmSlc
Well done. Now you do not have to return it or wait for a replacement.
My first plier based MT was an original Gerber probably 20 years ago. Brings back good memories, except pinching my hand ;)
-AdmSlc
Post by: babola on November 02, 2014, 11:05:37 AM
Post by: bobbaero on November 02, 2014, 02:18:09 PM
Post by: HarleyXJGuy on November 04, 2014, 08:52:57 PM
I am very disappointed with this Gerber multitool. As you can see the grind on the plier tip is uneven. There is only one edge on the very corner where it touches. Did I get a bad batch or is the quality control terrible?
-AdmSlc
Prolly seen over 100 MP 600's issued to myself and other Soldiers over the years and I have never seen something like that before.
Hope they get you sorted.
Just noticed I never posted a pic of my MP 600 here. Will try and fix it tomorrow.
Post by: Mattb on November 19, 2014, 01:15:36 AM
Amazon has a clickable $5 coupon on the MP600 Blunt Nose.
http://forum.multitool.org/index.php/topic,55799.0.html
Post by: Higgins617 on December 02, 2014, 04:07:43 AM
Post by: tosh on December 02, 2014, 07:13:52 AM
Hello to everyone. New to forum. Love the MP600. I've had mines for years and can't live without it. (http://tapatalk.imageshack.com/v2/14/10/31/5237078a816da3f1f4ff252b04fd93d3.jpg)
Did I just count 7 blades facing outwards.
Post by: David on December 02, 2014, 08:35:21 AM
Post by: Freaver on December 03, 2014, 07:24:07 PM
I just realized I hadnt posted a pic yet. MP600 BN.
Uhh, and with the replaceable cutters. Me likey. :drool:
Post by: JBW1 on December 04, 2014, 02:48:57 AM
Must do a lot of hack sawing and steak cuttingHello to everyone. New to forum. Love the MP600. I've had mines for years and can't live without it. (http://tapatalk.imageshack.com/v2/14/10/31/5237078a816da3f1f4ff252b04fd93d3.jpg)
Did I just count 7 blades facing outwards.
Post by: bobbaero on December 04, 2014, 04:04:09 AM
Post by: JBW1 on December 04, 2014, 05:53:20 AM
All added mods are pretty useful for my daily use. Thanks for viewing.What's your pocket clip off of, there bobbaero
Post by: bobbaero on December 05, 2014, 06:59:01 AM
Post by: zoidberg on December 07, 2014, 06:45:14 AM
(https://farm8.staticflickr.com/7476/15341585864_55ebd56ba3.jpg) (https://flic.kr/p/pnFCZ7)
Post by: zoidberg on December 08, 2014, 06:02:42 AM
Post by: HarleyXJGuy on December 08, 2014, 07:45:00 AM
Finally I can join this sweet club. :)
(https://farm8.staticflickr.com/7476/15341585864_55ebd56ba3.jpg) (https://flic.kr/p/pnFCZ7)
You finally get your parts?
Cant see your pics till after work.
Post by: zoidberg on December 08, 2014, 07:57:42 AM
Finally I can join this sweet club. :)
(https://farm8.staticflickr.com/7476/15341585864_55ebd56ba3.jpg) (https://flic.kr/p/pnFCZ7)
You finally get your parts?
Cant see your pics till after work.
Nar, I got the parcel from JA. Still looking for the parts. Might end up making some.
Post by: JBW1 on January 01, 2015, 04:47:56 AM
Post by: captain spaulding on January 01, 2015, 04:54:41 AM
Post by: JBW1 on January 01, 2015, 05:00:49 AM
Post by: Gareth on January 01, 2015, 01:10:51 PM
Post by: kirk13 on January 01, 2015, 01:43:51 PM
Post by: lowtech on January 01, 2015, 01:43:58 PM
thanks captain, you are correct sir :D now I just need that awesome spear point awl haha
I am afraid that even if you find an old Mr. Pinchy as a donor, the pivot area on the Mr. Pinchy tools is smaller and I am not sure if they can be adapted to the MP600 chassis.
And: Nice mod!
Post by: parnass on January 01, 2015, 02:42:43 PM
(http://parnass.com/images/gerber-mp600-1.jpg)
Post by: JBW1 on January 01, 2015, 03:43:52 PM
Thanks guys!thanks captain, you are correct sir :D now I just need that awesome spear point awl haha
I am afraid that even if you find an old Mr. Pinchy as a donor, the pivot area on the Mr. Pinchy tools is smaller and I am not sure if they can be adapted to the MP600 chassis.
And: Nice mod!
Glad your here parnass :)
Post by: tosh on January 14, 2015, 09:13:53 PM
The Gerber Trailrider finally showed up a few days ago :whistle:
Well, this has been a long wait - 2-3yrs in searching. I'd practically given up on ever actually getting one. Just goes to show you never know what's coming next.
Now I've seen it in the flesh, I do ask myself why was it so special. The hoof pick is nothing more than a stamped out piece of steel that's then been bead blasted. That's it, there is nothing else on this tool that is unique except for that one single implement. Ofcourse to me, as a collector the value far far outstrips it's actual worth. But my partner upon seeing it just laughed and quipped "fools and their money".
Bless her she's obviously not cultured ;)
These are pics off the ebay listing.
Post by: parnass on January 15, 2015, 02:54:28 AM
I was reading an old discussion thread last night which attempted to list most of them.
Post by: KnifeTex on January 16, 2015, 02:07:59 AM
Post by: HarleyXJGuy on January 16, 2015, 02:59:53 AM
Never warmed up to my stainless Spydie.
Post by: KnifeTex on January 16, 2015, 09:17:08 PM
Welcome to MTO fellow Texan.
Never warmed up to my stainless Spydie.
Thanks! I've been a long time lurker, but finally decided to post. I'm pretty busy with my YouTube channel and IG account, but I really want to get more involved with modding- and this forum is the best I've ever seen. I like the Stainless Endura more than my FRN FFG- Firstly, I'm a welder- so it won't melt- Second, it has zero front to back blade play- unlike any of my other FRN Spydie lock backs. Cheers my friend, see ya 'round!
KT
Post by: HarleyXJGuy on January 17, 2015, 02:51:23 AM
Welcome to MTO fellow Texan.
Never warmed up to my stainless Spydie.
Thanks! I've been a long time lurker, but finally decided to post. I'm pretty busy with my YouTube channel and IG account, but I really want to get more involved with modding- and this forum is the best I've ever seen. I like the Stainless Endura more than my FRN FFG- Firstly, I'm a welder- so it won't melt- Second, it has zero front to back blade play- unlike any of my other FRN Spydie lock backs. Cheers my friend, see ya 'round!
KT
Welder huh?
That is what I am gong to do when I retire later this year. Pipefitter.
Post by: pingu on February 06, 2015, 01:17:10 PM
The awl was the PE blade, the ex-EVO saw replaces the SE blade hopefully just as a place-holder for something longer.
I really like the BN capability after too many needlenose pliers. A small touch off the jaws to fit gas meter boxes. The cutters NIB were very poor on fine wire, the worst of any of my major brand MTs, but after a tickle off the jaw cut-outs now cuts great. A real advantage of replaceable cutters. Really disappointed the file doesn't have a cutting edge. IMO a major product omission.
Post by: ducttapetech on February 06, 2015, 01:58:56 PM
Nate
Post by: Gareth on February 09, 2015, 10:14:57 AM
Post by: JNieporte on May 12, 2015, 12:44:48 PM
MP600 military-issue in black oxide...
(http://i799.photobucket.com/albums/yy277/JNieporteBF/11May2015/016_zpsaupz3x2z.jpg)
Post by: pingu on May 12, 2015, 01:03:23 PM
A few days late here, but that's a great looking mod Pingu. :tu:
:tu: A few days late here too.
Sadly (or not), fully blunting and making my Spirit knifeless has destroyed the BN MP600 rationale. Flicking to get pliers is just about OK but I don't like parallel plier handles. Neither do I like having to deploy the pliers and then only be able to half open the handles to get at the tools, particularly the longer tools.
I only bought the MP600 for BN and it wasn't cheap but my BN Spirit easily has it licked. Still in the club (just) but not sure for much longer.
Post by: Marcellus on May 13, 2015, 04:36:38 AM
I really wish I liked this MT more , every so often it is given another day of carry
I do like the pliers one hand opening feature and the narrower span between the handles
After shattering the carbide cutters ( admit abuse here) I replaced them, but now, not sure of their ability to hold up to hard use
Post by: zoidberg on May 13, 2015, 09:25:45 AM
(https://c2.staticflickr.com/6/5339/17404368119_b3ca678962.jpg) (https://flic.kr/p/svXWhp)
Post by: HarleyXJGuy on May 13, 2015, 05:39:40 PM
Not quite stock but still a MP600. :angel:
(https://c2.staticflickr.com/6/5339/17404368119_b3ca678962.jpg) (https://flic.kr/p/svXWhp)
I am more interested in the knife behind your Gerber.
Post by: SteveC on May 13, 2015, 05:56:13 PM
Not quite stock but still a MP600. :angel:
(https://c2.staticflickr.com/6/5339/17404368119_b3ca678962.jpg) (https://flic.kr/p/svXWhp)
I am more interested in the knife behind your Gerber.
That's not a knife that's a SVORD :D
Post by: zoidberg on May 14, 2015, 02:35:15 AM
I am more interested in the knife behind your Gerber.
Older pic, Ka-Bar Large Heavy Bowie and Svord Von Tempsky Bowie.
(https://farm6.staticflickr.com/5591/14744096363_cf2d57817a.jpg) (https://flic.kr/p/osTmaZ)
Post by: Syncop8r on May 14, 2015, 09:38:00 AM
Post by: zoidberg on May 14, 2015, 09:47:00 AM
Lake Ellesmere
Correct.
Mega bonus points if you can name the access road I used?
Here is another pic taken that day with an identifier.
(https://farm4.staticflickr.com/3910/14723920732_d116cf5a80.jpg) (https://flic.kr/p/or6WEh)
Post by: Syncop8r on May 14, 2015, 10:32:11 AM
Hmm, is that timber I see? :pok:
http://www.stuff.co.nz/the-press/opinion/68314058/editorial-lake-ellesmere-has-a-future-again
Post by: zoidberg on May 14, 2015, 10:38:53 AM
I have only been to the reserve at the end of Timber Yard Rd on that side of the lake.Timber yes, Timber Yard Road no, it's the reserve at the end of Days Road by the Lower Selwyn Huts.
Hmm, is that timber I see? :pok:
http://www.stuff.co.nz/the-press/opinion/68314058/editorial-lake-ellesmere-has-a-future-again
Post by: Syncop8r on May 14, 2015, 10:49:55 AM
Post by: Monrogue on May 18, 2015, 06:09:14 PM
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150518_110348_656_zpskx02vvok.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150518_110348_656_zpskx02vvok.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20150518_110134_325_zpsefe7igrd.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20150518_110134_325_zpsefe7igrd.jpg.html)
Sent from my XT901 using Tapatalk
Post by: Kampfer on August 29, 2015, 12:57:30 AM
(http://forum.multitool.org/index.php?action=dlattach;topic=52129.0;attach=201034;image)
Post by: campussecurity on September 05, 2015, 12:33:41 AM
Post by: AimlessWanderer on September 05, 2015, 01:13:57 AM
Post by: Smaug on September 08, 2015, 05:33:33 PM
REALLY poor execution on the wire cutters, Gerber. Especially for the MT electricians are likely to choose.
At first, I thought carbide cutters would be brilliant, but reading about the breakages really made me realize that Leatherman's choice of 154CM was better: not brittle enough to shatter, but harder than anything likely to need cutting.
I need to try the standard cutters on an MP400. They should at LEAST be able to cut a coat hanger and 10 gauge wire without any drama. If not, I might be off of Gerber for good.
Their overall quality is just not there.
Post by: Demel on September 08, 2015, 07:14:34 PM
I used the wire cutters on my MP600 BN the other day. They're not good at all. Not big enough to cut through a power cable in one go. Cutting single stranded wire of 16 gauge half pinches it and half cuts it.That sucks. I wasn't impressed with the cutters either. On the upside, I will take the BN600 off your hands when your done with it
REALLY poor execution on the wire cutters, Gerber. Especially for the MT electricians are likely to choose.
At first, I thought carbide cutters would be brilliant, but reading about the breakages really made me realize that Leatherman's choice of 154CM was better: not brittle enough to shatter, but harder than anything likely to need cutting.
I need to try the standard cutters on an MP400. They should at LEAST be able to cut a coat hanger and 10 gauge wire without any drama. If not, I might be off of Gerber for good.
Their overall quality is just not there.
Post by: WiseDuck on September 08, 2015, 07:48:31 PM
But it's clearly a design issue, they just need to machine the carbide cutter seats a bit deeper and the cutters would meet closer and cut much better. You can cut paper with the 154CM cutters on Leatherman tools, so they clearly got that right. (Used to own a Rebar, gave it to my sister)
Post by: Smaug on September 12, 2015, 11:26:18 PM
I'm on the fence about getting a carbide cutter version with the stories about shattering inserts. A lot of people complain about the 600 design but I would trust one with my life!
Don't do it, unless you absolutely don't need a wire cutter. Because the carbide cutter is garbage. It doesn't cut any wire well. The other stories say if you try to cut thick solid gauge wire or steel coat hanger wire, the carbide shatters.
I traded off my MP600 BN. Just received a bladeless MP600. Both were brand new.
I think what happened is that Gerber designed in a bit more tolerance to the plier head, since if the carbide cutters actually met, they would shatter. But since they don't get close enough, they just kind of bend and half-shear wire. It is an utter design failure.
With that, I'm out of this club. Looking forward to receiving another MP400.
Post by: sawman on October 11, 2015, 12:28:25 AM
Who else here loves the handle splay of the MP600? It puts the new LM Signal to shame IMO.
I'll add that I prefer the regular wire cutters as opposed to the replaceable ones because in my experience they cut better.
Anyone share my love for this tool? ???
Post by: Monrogue on October 11, 2015, 12:33:31 AM
Sent from my SM-G920R4 using Tapatalk
Post by: Demel on October 11, 2015, 12:36:13 AM
I do buddy, even though I don't carry it much lately. I like the Diesel too.Would you say the Diesel is better or the same as the pro scout?
Sent from my SM-G920R4 using Tapatalk
Post by: Monrogue on October 11, 2015, 03:33:07 AM
That's one I struggle with. I would say overall they are the same to me, but each has pluses and minuses. I like the Pro Scout's pliers and ease of flickiness better as the Diesel's is a little tougher/trickier to flick. Neither has a metal saw, but the PS's remgrit saw could potentially do the job. The Diesel has a wood saw, although the remgrit may handle that too. Diesel is heavier too, but I prefer how it feels in hand. It has the 2D phillips, but also has the largest flathead while the PS doesn't. I think the Diesel slightly edges out the MP600 for my liking, but it's very close.I do buddy, even though I don't carry it much lately. I like the Diesel too.Would you say the Diesel is better or the same as the pro scout?
Sent from my SM-G920R4 using Tapatalk
Sent from my SM-G920R4 using Tapatalk
Post by: Demel on October 11, 2015, 03:40:46 AM
Makes sense. I was comparing the two and it seems to come down to very few differences. The pro scout also has the 3d phillips, blade exchanger, and the USA tag. I eventually want to get a pro scout because I had a diesel and it would be nice to compare the two in hand. Thanks for the feedbackThat's one I struggle with. I would say overall they are the same to me, but each has pluses and minuses. I like the Pro Scout's pliers and ease of flickiness better as the Diesel's is a little tougher/trickier to flick. Neither has a metal saw, but the PS's remgrit saw could potentially do the job. The Diesel has a wood saw, although the remgrit may handle that too. Diesel is heavier too, but I prefer how it feels in hand. It has the 2D phillips, but also has the largest flathead while the PS doesn't. I think the Diesel slightly edges out the MP600 for my liking, but it's very close.I do buddy, even though I don't carry it much lately. I like the Diesel too.Would you say the Diesel is better or the same as the pro scout?
Sent from my SM-G920R4 using Tapatalk
Sent from my SM-G920R4 using Tapatalk
Post by: Monrogue on October 11, 2015, 04:54:51 AM
Yeah the 3D phillips is a plus, but you lose the large flathead, so it's a matter of preference there. The blade exchanger with remgrit saw is a plus too, but I don't know what other blades are available, and don't like having other parts to carry since I don't use a sheath. The Diesel just seems a little more complete to me. It all comes down to personal preferences though, as all these MTs do. The Pro Scout is great though, and I recommend it if you like Gerbers. It's definitely one of the best :tu:Makes sense. I was comparing the two and it seems to come down to very few differences. The pro scout also has the 3d phillips, blade exchanger, and the USA tag. I eventually want to get a pro scout because I had a diesel and it would be nice to compare the two in hand. Thanks for the feedbackThat's one I struggle with. I would say overall they are the same to me, but each has pluses and minuses. I like the Pro Scout's pliers and ease of flickiness better as the Diesel's is a little tougher/trickier to flick. Neither has a metal saw, but the PS's remgrit saw could potentially do the job. The Diesel has a wood saw, although the remgrit may handle that too. Diesel is heavier too, but I prefer how it feels in hand. It has the 2D phillips, but also has the largest flathead while the PS doesn't. I think the Diesel slightly edges out the MP600 for my liking, but it's very close.I do buddy, even though I don't carry it much lately. I like the Diesel too.Would you say the Diesel is better or the same as the pro scout?
Sent from my SM-G920R4 using Tapatalk
Sent from my SM-G920R4 using Tapatalk
The reason it's a tough choice for me also is because I want to sell one or the other once I sort everything I need to sell.
Sent from my SM-G920R4 using Tapatalk
Post by: Monrogue on October 17, 2015, 06:27:59 AM
I think the remgrit saw would really handle either wood or metal in a pinch, and I honestly rarely have use to saw either one. So that beats the Diesel as it has no metal sawing capability. I'm thinking overall tool loadout goes to the bladeless MP600. The key area the Diesel will still win for me is the feel in hand. To me it just feels a little more solid and smoother. The handles don't splay quite as far either, which is a plus for me. I like the feel of it when squeezing the handles. It may just come down to me keeping both the Diesel and bladeless MP600, and selling my other Gerbers when the time comes.
I'm thinking I must enjoy torturing myself like this ::)
Post by: Demel on October 17, 2015, 03:26:50 PM
Post by: sawman on October 17, 2015, 03:35:33 PM
I'm eagerly awaiting the mail today, as I have a Gerber bit kit coming which I assume adapts to my Phillips. I will carry this in pocket to support my MP600 and may outfit it with different bits, I'm not sure yet.
@Kyle - You don't have to pick a favorite and sell your others off. It IS possible to have and enjoy different models ;)
Post by: Monrogue on October 17, 2015, 04:07:33 PM
Why does the bladeless 600 only come in black?I really don't know :think:
Sent from my SM-G920R4 using Tapatalk
Post by: Monrogue on October 17, 2015, 04:15:51 PM
I don't know if I could do the bladeless, as my plain wharncliff and serrated blades are used quite often in my MP600. In fact, I just sharpened my blade again yesterday to touch it up a bit. I don't think I would ever use the remgrit blade, nor the Gerber scissors. One thing I like about the standard model over the Pro Scout is the large flat driver, which also sees a lot of use.Yeah, if you use the MT blades a lot (which I don't), then a bladeless wouldn't be much good. I do like the blade on them as it's a good utility blade, but I rarely use it. The MechaRogue's blade and awl handle most or pretty much all of my typical blade needs. Lol, I do understand I could keep them all, and I do enjoy them all. However, I want to trim the fat so to speak. I want just a few MTs to stick with, but it's a tough choice indeed.
I'm eagerly awaiting the mail today, as I have a Gerber bit kit coming which I assume adapts to my Phillips. I will carry this in pocket to support my MP600 and may outfit it with different bits, I'm not sure yet.
@Kyle - You don't have to pick a favorite and sell your others off. It IS possible to have and enjoy different models ;)
Sent from my SM-G920R4 using Tapatalk
Post by: captain spaulding on October 17, 2015, 09:16:00 PM
Why does the bladeless 600 only come in black?I really don't know :think:
Sent from my SM-G920R4 using Tapatalk
I'm not sure either, but I want one in SS.
Post by: Sky Pickle on October 20, 2015, 04:27:57 AM
(http://i.imgur.com/Dz1SNc4.jpg)
Any suggestions on potential mods? I haven't tinkered with any MTs yet and am thinking about starting with this one (unless this is a particularly hard tool to work with).
Post by: captain spaulding on October 20, 2015, 09:55:01 AM
Recently acquired MP 600 Pro Scout:
(http://i.imgur.com/Dz1SNc4.jpg)
Any suggestions on potential mods? I haven't tinkered with any MTs yet and am thinking about starting with this one (unless this is a particularly hard tool to work with).
The MP600 is actually perfect to learn on. Its one of the easiest tools to mod.
Post by: zoidberg on October 20, 2015, 11:06:17 AM
Recently acquired MP 600 Pro Scout:
(http://i.imgur.com/Dz1SNc4.jpg)
Any suggestions on potential mods? I haven't tinkered with any MTs yet and am thinking about starting with this one (unless this is a particularly hard tool to work with).
Nice. :tu: Blunt nose it. :D
Post by: Monrogue on October 30, 2015, 12:16:21 PM
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20151027_141932_zpsxdrt203t.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20151027_141932_zpsxdrt203t.jpg.html)
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20151027_142016_zpsztuxotf4.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20151027_142016_zpsztuxotf4.jpg.html)
Sent from my SM-G920R4 using Tapatalk
Post by: sawman on October 30, 2015, 12:30:31 PM
Post by: Crow on October 30, 2015, 06:19:53 PM
Post by: jerseydevil on October 30, 2015, 07:04:53 PM
I would say one of my fawourites. I have blunt nosed MP600. Unfortinantely sees too little use because i have too many multis. This one i would like to mod with scissors and t-shank. Someday...
:pok: It's a simple mod..... :pok:
Post by: Crow on October 30, 2015, 07:06:20 PM
Yes, but i have no spares for it yet...I would say one of my fawourites. I have blunt nosed MP600. Unfortinantely sees too little use because i have too many multis. This one i would like to mod with scissors and t-shank. Someday...ok: It's a simple mod.....
Post by: NetsNJ on October 30, 2015, 09:07:43 PM
MP600 = best tool on market :multi:
It is an awesome, underrated tool. Gerber gets such a bad rap but the MP series tools are just as well made and machined and Leathermans.
Post by: sLaughterMed on November 03, 2015, 05:44:07 PM
Post by: Monrogue on November 03, 2015, 08:11:08 PM
I wanna join! Does this count? MP600 Basic modded with Excalibur shears. My current go to gardening tool.I like that :tu:
Sent from my SM-G920R4 using Tapatalk
Post by: sLaughterMed on November 04, 2015, 12:13:43 AM
Post by: gregozedobe on November 04, 2015, 12:37:42 AM
Me too ;). Its just missing a woodsaw... For now
If you add in the tool holder you could put whatever saw blade you wanted in - wood, metal, remgrit (and easily swap/replace whenever you wanted).
Post by: sawman on November 04, 2015, 03:24:22 AM
I like the Pro Scout too except it's missing the large flat driver.Me too ;). Its just missing a woodsaw... For now
If you add in the tool holder you could put whatever saw blade you wanted in - wood, metal, remgrit (and easily swap/replace whenever you wanted).
Post by: sLaughterMed on November 04, 2015, 04:34:32 AM
Post by: WoodsDuck on November 04, 2015, 04:18:56 PM
What I really think it needs is an awl.
Post by: lowtech on November 04, 2015, 07:10:29 PM
Me too ;). Its just missing a woodsaw... For now
If you add in the tool holder you could put whatever saw blade you wanted in - wood, metal, remgrit (and easily swap/replace whenever you wanted).
The problem being is that it´s hard to find U-shank blades in general and ones with the hole and adequate thickness even more so. At least here in germany.
If you have a good source, let me know.
You could use the saw from a Strata or Diesel, for example, making the shears even more garden-oriented.
Post by: sawman on November 04, 2015, 11:38:07 PM
Post by: sLaughterMed on November 04, 2015, 11:53:13 PM
I actually already happen to have a u shank with the hole, it came with my jigsaw (which actually takes t shanks anyhow. :shrug:).Me too ;). Its just missing a woodsaw... For now
If you add in the tool holder you could put whatever saw blade you wanted in - wood, metal, remgrit (and easily swap/replace whenever you wanted).
The problem being is that it´s hard to find U-shank blades in general and ones with the hole and adequate thickness even more so. At least here in germany
If you have a good source, let me know.
You could use the saw from a Strata or Diesel, for example, making the shears even more garden-oriented.
Ive thought of using a Diesel saw as well, didn't know the Strata saw would work as well
Post by: sLaughterMed on November 04, 2015, 11:54:51 PM
As far as EDC, although I have a sheath for my MP600, I often just toss it in my back pocket (where I barely notice it :D )Right or left? I've got to be honest, I've never even considered back pocket carry got a multi...
Post by: sawman on November 04, 2015, 11:59:57 PM
Wallet in right pocket and MP600 in left.As far as EDC, although I have a sheath for my MP600, I often just toss it in my back pocket (where I barely notice it :D )Right or left? I've got to be honest, I've never even considered back pocket carry got a multi...
Post by: zoidberg on November 05, 2015, 12:03:02 AM
Me too ;). Its just missing a woodsaw... For now
If you add in the tool holder you could put whatever saw blade you wanted in - wood, metal, remgrit (and easily swap/replace whenever you wanted).
The problem being is that it´s hard to find U-shank blades in general and ones with the hole and adequate thickness even more so. At least here in germany.
If you have a good source, let me know.
You could use the saw from a Strata or Diesel, for example, making the shears even more garden-oriented.
The shops here stock them. Which brands fit the best? I don't know cause I still haven't got one yet.
Post by: sLaughterMed on November 05, 2015, 12:22:26 AM
I think ill have to try that...Wallet in right pocket and MP600 in left.As far as EDC, although I have a sheath for my MP600, I often just toss it in my back pocket (where I barely notice it :D )Right or left? I've got to be honest, I've never even considered back pocket carry got a multi...
Post by: Monrogue on November 05, 2015, 02:05:18 AM
I carry mine in the right back pocket next to my wallet, on the right of it. Keeps it vertical and in place so it's less noticeable. Of course the larger/heavier the multi, the less effective this method is.I think ill have to try that...Wallet in right pocket and MP600 in left.As far as EDC, although I have a sheath for my MP600, I often just toss it in my back pocket (where I barely notice it :D )Right or left? I've got to be honest, I've never even considered back pocket carry got a multi...
Sent from my SM-G920R4 using Tapatalk
Post by: WoodsDuck on November 06, 2015, 08:11:49 PM
Post by: AlephZero on November 07, 2015, 11:45:28 AM
(http://i737.photobucket.com/albums/xx12/CaineKitty/Forum/PIC000120.jpg)
Here's my MP600 DET, which I love and adore :dd: :D
Post by: sLaughterMed on November 09, 2015, 11:16:59 PM
Post by: captain spaulding on November 09, 2015, 11:18:56 PM
my other submission. Black and White MP600 Bluntnose. Been carrying this on a pocket dangler all day, seems to work best for me
looks great and its probably not bad on the dangler.
Post by: Monrogue on November 10, 2015, 12:22:11 AM
my other submission. Black and White MP600 Bluntnose. Been carrying this on a pocket dangler all day, seems to work best for meI like the dual color scheme :tu:
Sent from my SM-G920R4 using Tapatalk
Post by: sawman on November 10, 2015, 12:27:24 AM
Post by: captain spaulding on November 10, 2015, 01:08:29 AM
Post by: sLaughterMed on November 10, 2015, 11:55:30 PM
The two tone is nice, really makes the tool look much sharper, like it's wearing a suit. And the pocket dangler really makes this tool for me. I cant seem to find another way to carry this tool.
looks great and its probably not bad on the dangler.
Nice, and I like to see someone take advantage of the lanyard loop. One of the many nice features of the tool :DYep, lanyard loop is nice, if you use it. If you don't, I can see how it's frustrating to have. It is a bit thick, I feel like halving that tool slot with the small driver and adding a woodsaw would make Gerber a real competitor.
I need some MP600 parts so I can put mine together.PM sent
Post by: ToolJoe on November 16, 2015, 08:11:04 PM
Post by: jerseydevil on November 16, 2015, 09:06:17 PM
I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder :tu:
The bladeless MP425 mod is perfect with a dedicated folder. :tu: The bladeless 600 would do the same in a larger package. I need to get myself one as well.
Post by: Etherealicer on November 16, 2015, 09:19:36 PM
I think I need to get me som MP400I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder :tu:
The bladeless MP425 mod is perfect with a dedicated folder. :tu: The bladeless 600 would do the same in a larger package. I need to get myself one as well.
I blame
Post by: AimlessWanderer on November 16, 2015, 09:44:24 PM
I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder :tu:
The bladeless MP425 mod is perfect with a dedicated folder. :tu: The bladeless 600 would do the same in a larger package. I need to get myself one as well.
I think the only snag with the official bladeless 600 is the replacable cutters. Shame they didn't go with a standard plier head IMHO
Post by: Etherealicer on November 16, 2015, 09:49:59 PM
They should also change their blade-holder. Hard to get u-shanks with holes these days...I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder :tu:
The bladeless MP425 mod is perfect with a dedicated folder. :tu: The bladeless 600 would do the same in a larger package. I need to get myself one as well.
I think the only snag with the official bladeless 600 is the replacable cutters. Shame they didn't go with a standard plier head IMHO
Post by: AimlessWanderer on November 16, 2015, 10:00:04 PM
They should also change their blade-holder. Hard to get u-shanks with holes these days...I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder :tu:
The bladeless MP425 mod is perfect with a dedicated folder. :tu: The bladeless 600 would do the same in a larger package. I need to get myself one as well.
I think the only snag with the official bladeless 600 is the replacable cutters. Shame they didn't go with a standard plier head IMHO
I think we can still get them over here, so if you need some give me a yell and I'll see what I can find
Post by: ToolJoe on November 16, 2015, 10:02:29 PM
I've read about the cutters not being the strong point but I don't cut that much in the way of heavy materials. The extent of what I might cut is string for the weed wacker and the occasional coat hanger.
I rotate my carry between a Crater C33T and a Gerber EAB.
Post by: AimlessWanderer on November 16, 2015, 10:06:26 PM
The one time that I crunched the cutters though, I wasn't actually cutting anything... I was actually using the main gripping area while trying to assemble a large kerosene heater, and gripped a littled too deeply in the plier heads. :-\ just something to be wary of mate :cheers:
Post by: Etherealicer on November 16, 2015, 10:09:59 PM
From time to time you can get some cheapos here, mostly for wood, rarely for metal. But never quality blades, or a bit of more exotic ones like the waved one for softer materials:They should also change their blade-holder. Hard to get u-shanks with holes these days...I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder :tu:
The bladeless MP425 mod is perfect with a dedicated folder. :tu: The bladeless 600 would do the same in a larger package. I need to get myself one as well.
I think the only snag with the official bladeless 600 is the replacable cutters. Shame they didn't go with a standard plier head IMHO
I think we can still get them over here, so if you need some give me a yell and I'll see what I can find
(http://mdm.boschwebservices.com/files/Bosch%20T-Shank%20Jig%20Saw%20Blades%20(EN)%20r46316v33.png)
Post by: ToolJoe on November 16, 2015, 10:14:27 PM
Noted Joe :salute:
The one time that I crunched the cutters though, I wasn't actually cutting anything... I was actually using the main gripping area while trying to assemble a large kerosene heater, and gripped a littled too deeply in the plier heads. :-\ just something to be wary of mate :cheers:
Eeekk thats not good..
Post by: AimlessWanderer on November 16, 2015, 10:18:09 PM
That being said..... I still do actually like the MP700, but there isn't the option for an alternate plier head on that tool. I have also learnt my lesson and try to pay more attention if using the main gripping area ;)
Post by: sawman on November 16, 2015, 11:03:28 PM
Post by: Monrogue on November 17, 2015, 12:25:17 AM
I agree :tu:I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder :tu:
The bladeless MP425 mod is perfect with a dedicated folder. :tu: The bladeless 600 would do the same in a larger package. I need to get myself one as well.
I think the only snag with the official bladeless 600 is the replacable cutters. Shame they didn't go with a standard plier head IMHO
Sent from my SM-G920R4 using Tapatalk
Post by: Monrogue on November 17, 2015, 12:25:59 AM
I'm surprised you don't have oneI'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder :tu:
The bladeless MP425 mod is perfect with a dedicated folder. :tu: The bladeless 600 would do the same in a larger package. I need to get myself one as well.
ok:Sent from my SM-G920R4 using Tapatalk
Post by: jerseydevil on November 17, 2015, 01:20:35 AM
I'm surprised you don't have oneI'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder :tu:
The bladeless MP425 mod is perfect with a dedicated folder. :tu: The bladeless 600 would do the same in a larger package. I need to get myself one as well.
Sent from my SM-G920R4 using Tapatalk
Me too. ;)
Post by: WoodsDuck on January 21, 2016, 04:41:13 AM
(http://i.imgur.com/GNNg8PK.jpg)
Post by: David on January 21, 2016, 05:48:35 AM
Post by: SAK Guy on January 24, 2016, 06:27:58 PM
(http://i833.photobucket.com/albums/zz256/SAKGuy/Gerber%20Multi-Lock_zpsihgfaqhf.jpg)
Post by: Monrogue on January 24, 2016, 08:40:34 PM
Just outta the box, didn't even clean the grease off yet! :tu:Is this your first flicky? It's addictive to flick them
(http://i833.photobucket.com/albums/zz256/SAKGuy/Gerber%20Multi-Lock_zpsihgfaqhf.jpg)
Sent from my SM-G920R4 using Tapatalk
Post by: jerseydevil on January 24, 2016, 09:37:45 PM
Just outta the box, didn't even clean the grease off yet! :tu:Is this your first flicky? It's addictive to flick them
(http://i833.photobucket.com/albums/zz256/SAKGuy/Gerber%20Multi-Lock_zpsihgfaqhf.jpg)
That it is. I've annoyed bosses quite a bit flicking at work. >:D. Very nice SAK Guy! :tu:
Post by: SAK Guy on January 24, 2016, 10:38:00 PM
Just outta the box, didn't even clean the grease off yet! :tu:Is this your first flicky? It's addictive to flick them
(http://i833.photobucket.com/albums/zz256/SAKGuy/Gerber%20Multi-Lock_zpsihgfaqhf.jpg)
That it is. I've annoyed bosses quite a bit flicking at work. >:D. Very nice SAK Guy! :tu:
Yes Monrogue! :salute:
Thanks JD! I'm working on my technique! :D
Post by: captain spaulding on January 24, 2016, 10:45:01 PM
I may have to buy the bladeless Rebar after all. :D
Post by: jerseydevil on January 24, 2016, 10:49:08 PM
Just outta the box, didn't even clean the grease off yet! :tu:Is this your first flicky? It's addictive to flick them
(http://i833.photobucket.com/albums/zz256/SAKGuy/Gerber%20Multi-Lock_zpsihgfaqhf.jpg)
That it is. I've annoyed bosses quite a bit flicking at work. >:D. Very nice SAK Guy! :tu:
Yes Monrogue! :salute:
Thanks JD! I'm working on my technique! :D
With the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.
Post by: Smaug on January 27, 2016, 08:19:25 PM
The problem being is that it´s hard to find U-shank blades in general and ones with the hole and adequate thickness even more so. At least here in germany.
If you have a good source, let me know.
We have a good selection of Bosch U-shank blades here in the US. Maybe not quite as many as T-shank but enough to have something useful. If you want some badly enough to ship them from the US, drop me a PM or email and I'll go pick some up for you.
I went for the PS because it is US-made and I like the tool combo and the fact that it has the old style wire cutter.
Post by: Smaug on January 27, 2016, 08:24:55 PM
With the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.
There's also the other way, the way that Leatherman recommends for their models with the slide-out pliers.
Hold with the thumb and forefinger on the release buttons, with the tool handles down. Then press the buttons and flick it downward, so the handles drop away from the plier head.
Since the handles with tools are heavier than the plier head, this method works with a lot less speed and force, it's more reliable for me.
Post by: jerseydevil on January 28, 2016, 03:33:01 AM
With the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.
There's also the other way, the way that Leatherman recommends for their models with the slide-out pliers.
Hold with the thumb and forefinger on the release buttons, with the tool handles down. Then press the buttons and flick it downward, so the handles drop away from the plier head.
Since the handles with tools are heavier than the plier head, this method works with a lot less speed and force, it's more reliable for me.
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
Post by: Monrogue on January 28, 2016, 03:57:57 AM
Same hereWith the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.
There's also the other way, the way that Leatherman recommends for their models with the slide-out pliers.
Hold with the thumb and forefinger on the release buttons, with the tool handles down. Then press the buttons and flick it downward, so the handles drop away from the plier head.
Since the handles with tools are heavier than the plier head, this method works with a lot less speed and force, it's more reliable for me.
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
Sent from my SM-G920R4 using Tapatalk
Post by: NetsNJ on January 28, 2016, 11:31:59 PM
--
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
I love flicking the pliers outward. It just feels awesome. The multitool equivalent of
(http://static.businessinsider.com/image/55cb9b3edd0895ef048b4585/image.gif)
and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
Post by: sLaughterMed on January 29, 2016, 05:16:42 PM
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?Wait, are you flicking it open without depressing the buttons? That shouldn't happen.
--True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
I love flicking the pliers outward. It just feels awesome. The multitool equivalent of
(http://static.businessinsider.com/image/55cb9b3edd0895ef048b4585/image.gif)
and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
Gerber should cover your Pro Scout. More than likely they will just send you a new one.
Post by: SAK Guy on January 29, 2016, 05:52:54 PM
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?Wait, are you flicking it open without depressing the buttons? That shouldn't happen.
--True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
I love flicking the pliers outward. It just feels awesome. The multitool equivalent of
(http://static.businessinsider.com/image/55cb9b3edd0895ef048b4585/image.gif)
and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
Gerber should cover your Pro Scout. More than likely they will just send you a new one.
Mine works that way...the buttons only have to be depressed to retract the pliers.
Post by: WoodsDuck on January 29, 2016, 06:06:46 PM
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?Wait, are you flicking it open without depressing the buttons? That shouldn't happen.
--True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
I love flicking the pliers outward. It just feels awesome. The multitool equivalent of
(http://static.businessinsider.com/image/55cb9b3edd0895ef048b4585/image.gif)
and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
Gerber should cover your Pro Scout. More than likely they will just send you a new one.
Mine works that way...the buttons only have to be depressed to retract the pliers.
Yeah, and all the Gerber instruction manuals I've seen actually recommend you do it that way. That's probably why they don't have a lock to keep them closed.
Post by: sLaughterMed on January 29, 2016, 08:08:27 PM
Post by: clown on January 30, 2016, 02:24:48 AM
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?
--True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
I love flicking the pliers outward. It just feels awesome.
and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
You can most certainly flick out the pliers on the OHT. Did it all day at work today.
Post by: Smaug on January 30, 2016, 05:29:17 AM
Huh. I just had a look at all my Mp series tools. You're right, theres nothing but friction preventing the pliers from opening. I cant believe I didn't notice that before.
OK, Turn in your Man Card.
Post by: sLaughterMed on January 30, 2016, 06:13:47 AM
:-\ But then how will I get into the Man Club?Huh. I just had a look at all my Mp series tools. You're right, theres nothing but friction preventing the pliers from opening. I cant believe I didn't notice that before.
OK, Turn in your Man Card.
Seriously though, I always just depressed the buttons before flicking. Never even occurred to me to try it without.
Post by: SteveC on January 31, 2016, 12:19:00 AM
Sellers Pics
(http://i.ebayimg.com/images/g/K3EAAOSwZ1lWgwS4/s-l1600.jpg)
(http://i.ebayimg.com/images/g/sWYAAOSwCQNWgwTV/s-l1600.jpg)
Post by: sLaughterMed on January 31, 2016, 12:29:38 AM
Post by: kirk13 on January 31, 2016, 12:50:11 AM
I have my first flicky tool on the way.
Sellers Pics
(http://i.ebayimg.com/images/g/K3EAAOSwZ1lWgwS4/s-l1600.jpg)
(http://i.ebayimg.com/images/g/sWYAAOSwCQNWgwTV/s-l1600.jpg)
It'll be a shock to the system after LM!
Post by: clown on January 31, 2016, 06:17:31 AM
I have my first flicky tool on the way.
Sellers Pics
(http://i.ebayimg.com/images/g/K3EAAOSwZ1lWgwS4/s-l1600.jpg)
(http://i.ebayimg.com/images/g/sWYAAOSwCQNWgwTV/s-l1600.jpg)
I got one of those too! Got mine a couple weeks ago. Pretty cool tool at good price.
Post by: SteveC on February 01, 2016, 03:53:31 PM
I have my first flicky tool on the way.
Sellers Pics
(http://i.ebayimg.com/images/g/K3EAAOSwZ1lWgwS4/s-l1600.jpg)
(http://i.ebayimg.com/images/g/sWYAAOSwCQNWgwTV/s-l1600.jpg)
I got one of those too! Got mine a couple weeks ago. Pretty cool tool at good price.
I got it at a great price with the Make an offer option.
Post by: NetsNJ on February 01, 2016, 06:33:05 PM
You can most certainly flick out the pliers on the OHT. Did it all day at work today.
Forgot the OHT! :whistle:
Post by: zoidberg on February 02, 2016, 12:48:01 PM
Just outta the box, didn't even clean the grease off yet! :tu:
(http://i833.photobucket.com/albums/zz256/SAKGuy/Gerber%20Multi-Lock_zpsihgfaqhf.jpg)
Very nice, congrats. :cheers:
Post by: zoidberg on February 02, 2016, 12:49:44 PM
I have my first flicky tool on the way.
Sellers Pics
(http://i.ebayimg.com/images/g/K3EAAOSwZ1lWgwS4/s-l1600.jpg)
(http://i.ebayimg.com/images/g/sWYAAOSwCQNWgwTV/s-l1600.jpg)
And another congrats. :cheers:
Post by: zoidberg on February 02, 2016, 01:00:57 PM
Huh. I just had a look at all my Mp series tools. You're right, theres nothing but friction preventing the pliers from opening. I cant believe I didn't notice that before.
:pommel:
Post by: SAK Guy on February 02, 2016, 03:36:29 PM
Just outta the box, didn't even clean the grease off yet! :tu:
(http://i833.photobucket.com/albums/zz256/SAKGuy/Gerber%20Multi-Lock_zpsihgfaqhf.jpg)
Very nice, congrats. :cheers:
Thx Dr. Z!!! :cheers: :cheers:
Post by: SteveC on February 02, 2016, 03:59:48 PM
I have my first flicky tool on the way.
Sellers Pics
(http://i.ebayimg.com/images/g/K3EAAOSwZ1lWgwS4/s-l1600.jpg)
(http://i.ebayimg.com/images/g/sWYAAOSwCQNWgwTV/s-l1600.jpg)
And another congrats. :cheers:
Thanks Z :cheers:
Post by: ThePeacent on February 07, 2016, 10:39:09 AM
All I know about Gerber MTs has come from you guys and this section of the forums.
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160207_101026_zpsd3beaxeo.jpg)
You made me appreciate my old Mr.Pinchy and acquire other MP series multitools during these years!
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160207_101043_zpsenw0eva6.jpg)
May I join the club today? ;) My original and first MP600, was the blunt nose version above.
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160207_101133_zpsps0i6jj9.jpg)
And I also have a needle nose, BO MP600 with replaceable wire cutters from time to time...and two Dime tools, one of them in my BOB bag.
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160207_101202_zpsg9z71x9f.jpg)
also...does this guy count? Got it for the novelty factor and found it excels at trimming my plants and gardening chores.
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20150804_160435_zpsjxechvjj.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20150804_160530_zpsq4ekgbth.jpg)
I get a lot of use out of it, but remains as shiny as my Vic Spirit!
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160207_101246_zpsrlna5blp.jpg)
Thank you all!
Post by: Marcellus on February 09, 2016, 12:00:15 AM
He said that he had two MP600s himself
I call that a good thing, and a draw
Post by: jerseydevil on February 09, 2016, 01:34:14 AM
Post by: sLaughterMed on February 09, 2016, 02:20:59 AM
MP600's forever! :viking:+1
Hey Peacent, did you know that the shear head from your Multitasker will fit into the MP600 frame?
Heres an older pic of mine:
(http://i.imgur.com/WDSD532.jpg)
Post by: ThePeacent on February 09, 2016, 01:30:08 PM
MP600's forever! :viking:+1
Hey Peacent, did you know that the shear head from your Multitasker will fit into the MP600 frame?
Heres an older pic of mine:
(http://i.imgur.com/WDSD532.jpg)
Yeah, I know! I've read the two threads I could find about it, the thing is I am not sure I want to swap out the heads.
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160207_140004_zpsqxus7idi.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160207_133912_zpsxfyuegry.jpg)
The utility and toolset provided by the Multitasker on its own is better suited for my gardening tasks than the MP (OHO blade, saw, and precision/small pliers), which is more suited for city/industrial areas IMO.
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160207_133852_zpsklqytbr2.jpg)
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160207_140131_zpsyncx3tmi.jpg)
Thanks for the tip, though!
Post by: SteveC on February 09, 2016, 03:14:43 PM
(http://i.imgur.com/55Gn6n9h.jpg?1)
Post by: clown on February 16, 2016, 02:28:33 AM
Post by: macabee on March 27, 2016, 03:02:52 PM
Post by: kirk13 on March 27, 2016, 03:35:23 PM
I have the S/S MP600 with the remgrit blade, needle nose plier head, no scissors, this was a set with the torch. I also have the BO 'Bladeless' to comply with UK knife laws. :multi:
How are you finding the bladeless? I'm a bit of a fan of it :tu:
Post by: macabee on March 27, 2016, 04:06:47 PM
I have the S/S MP600 with the remgrit blade, needle nose plier head, no scissors, this was a set with the torch. I also have the BO 'Bladeless' to comply with UK knife laws. :multi:
How are you finding the bladeless? I'm a bit of a fan of it :tu:
I do like it, it has scissors instead and the Remgrit saw, at least I can carry as an EDC safe in the knowledge that I am 'legal'
My only gripe was with the BO finish I had to give a little wipe with a cloth dabbed with a bit of surgical spirit, as the BO came of on my hands at first.
What I like about the entire MP600 range is the simplicity of the tool range, a good solid tool, which as has been quoted previously the AK47 of multitools
Post by: matty78943 on May 15, 2016, 09:42:52 AM
Has anybody gotten the MP600 Bladeless yet? I was just cruising around on Gerber's site and saw it listed. Anyways, pretty cool move on Gerber's part, good for travel (probably) and should be legal in UK etc...
http://www.gerbergear.com/Industrial/Tools/MP600-Bladeless_30-000952
I was going to make a new thread but since I am at work, the restrictions the gov't puts on our network won't allow me to.
I honestly had no idea these existed. Very cool! :tu:
Maybe this is the push Leatherman needs to make a bladeless Rebar. :whistle:
they do its called the EDC Rebar
Post by: zoidberg on May 15, 2016, 09:55:52 AM
they do its called the EDC RebarHas anybody gotten the MP600 Bladeless yet? I was just cruising around on Gerber's site and saw it listed. Anyways, pretty cool move on Gerber's part, good for travel (probably) and should be legal in UK etc...
http://www.gerbergear.com/Industrial/Tools/MP600-Bladeless_30-000952
I was going to make a new thread but since I am at work, the restrictions the gov't puts on our network won't allow me to.
I honestly had no idea these existed. Very cool! :tu:
Maybe this is the push Leatherman needs to make a bladeless Rebar. :whistle:
Easy tiger, the Knifeless Rebar wasn't leaked until late 2015 so...
Post by: rdub934 on May 18, 2016, 10:06:26 PM
(http://i611.photobucket.com/albums/tt197/Russell_Wyatt_Jackson/Mobile%20Uploads/20160517_1307040-1_zpsbfrhxbez.jpg) (http://s611.photobucket.com/user/Russell_Wyatt_Jackson/media/Mobile%20Uploads/20160517_1307040-1_zpsbfrhxbez.jpg.html)
Post by: Monrogue on May 19, 2016, 02:50:38 AM
Not sure if I had joined previously, but I'm in with MP600DVery cool :tu:
(http://i611.photobucket.com/albums/tt197/Russell_Wyatt_Jackson/Mobile%20Uploads/20160517_1307040-1_zpsbfrhxbez.jpg) (http://s611.photobucket.com/user/Russell_Wyatt_Jackson/media/Mobile%20Uploads/20160517_1307040-1_zpsbfrhxbez.jpg.html)
Sent from my SM-G920R4 using Tapatalk
Post by: ZoeTooCute on July 01, 2016, 07:29:29 PM
My gripes on the mp600 bladeless. Idk whats up but i cannot "flick" it open for the life of me.. I have tried endlessly, and im sure at this point its fairly broken in. it seems I can quite be sqeezing the handles when i flick but i cant push them open a little before i flick either.. it has to be "JUST A TEENY TINY BIT more open than all the way closed tight" for it to actually slide open.. and even then i still havent managed to get it to actually flick open.. any thoughts or suggestions? bad batch? can i fix it?
thats my biggest complaint... other than that.. the remgrit saw sucks ass... i dont know what it is supposed to saw but its freaking huge.. looks like its covered in sandpaper goop way too much of it. lastly none of the tools open easily at all i have to damn near pry them open and open all the tools on that side to get the one i need. too tight i guess.
The PC on the other hand.. also cant get it to flick but it seems like thats just cause its really tight. lets see... the file falls off easy when you open it.. oh and its tools are even tighter and harder to open. idk maybe i am just a weakling but is there any fixes for this at all anyone knows of? any suggestions? not a huge fan of the PC saw or knife either if some can reccomend a good upgrade to mod on for both been searching but cant figure what the best bet to buy is..
Anyway all in all I'm definetly proud and happy i went the gerber route.. i plan to get more soon too i love them! :D
Post by: ThePeacent on July 01, 2016, 07:54:30 PM
Just got my first two gerbers about a week ago and I love them. Got the MP600 Bladeless and the PC multi-tasker. personally, im enjoying the PC way more. Those shears are freaking incredible. I started screwing around seeing what all it could cut like butter (which is basically everything) and I ended up putting some slices in my partners shoes... uh oh :< but seriously! like butter! also the s shaped design is awesome cause i like that i can open the knife without opening the whole tool. as well as the file and saw. the mp600 is nice but at the moment i seem to have more gripes than compliments it seems. mostly since i got it to be the base for my custom modded edc tool. (although the PC may end up that format as well!)
My gripes on the mp600 bladeless. Idk whats up but i cannot "flick" it open for the life of me.. I have tried endlessly, and im sure at this point its fairly broken in. it seems I can quite be sqeezing the handles when i flick but i cant push them open a little before i flick either.. it has to be "JUST A TEENY TINY BIT more open than all the way closed tight" for it to actually slide open.. and even then i still havent managed to get it to actually flick open.. any thoughts or suggestions? bad batch? can i fix it?
thats my biggest complaint... other than that.. the remgrit saw sucks ass... i dont know what it is supposed to saw but its freaking huge.. looks like its covered in sandpaper goop way too much of it. lastly none of the tools open easily at all i have to damn near pry them open and open all the tools on that side to get the one i need. too tight i guess.
The PC on the other hand.. also cant get it to flick but it seems like thats just cause its really tight. lets see... the file falls off easy when you open it.. oh and its tools are even tighter and harder to open. idk maybe i am just a weakling but is there any fixes for this at all anyone knows of? any suggestions? not a huge fan of the PC saw or knife either if some can reccomend a good upgrade to mod on for both been searching but cant figure what the best bet to buy is..
Anyway all in all I'm definetly proud and happy i went the gerber route.. i plan to get more soon too i love them! :D
Glad you like yours, I love my PC more than any of my MPs too! Perfect for gardening chores and cutting small branches and twigs.
(http://i1314.photobucket.com/albums/t562/ThePeacent/t4_zpsy7rviuno.jpg)
It is hefty, though, and quite thick.
(http://i1314.photobucket.com/albums/t562/ThePeacent/CAM01044_zpsx1lznvq6.jpg)
The file is so easy to take off because it is supposed to be handy and quickly usable to sharpen the shears/scissors and put it back into place. IIRC its main purpose is quick sharpening of the tool itself.
(http://i1314.photobucket.com/albums/t562/ThePeacent/13062377_1063728340355678_8990481259242226966_n_zpsuhtat7hw.jpg)
The knife blade can be opened fast and closed rapidly, something I really appreciate. Mine opens easy and smooth.
(http://i1314.photobucket.com/albums/t562/ThePeacent/CAM01051_zpsjcf8xj1m.jpg)
The saw is indeed a bit crappy
The pliers are weird but stronger than they appear. I've put mine through tough jobs and they did just well.
(http://i1314.photobucket.com/albums/t562/ThePeacent/13012797_1063727750355737_4739133299946627291_n_zpsrkmkr6yx.jpg)
In my opinion, it has one of the best designs and concepts out there, but a relatively poor execution and attention to detail.
(http://i1314.photobucket.com/albums/t562/ThePeacent/13087705_1063728160355696_7546518424866257584_n_zpsbuwt1i3m.jpg)
Phillips is compatible with Gerber and LM bit driver/extender, which is also a big plus to me. :tu:
Post by: WoodsDuck on July 01, 2016, 08:17:28 PM
Just got my first two gerbers about a week ago and I love them. Got the MP600 Bladeless and the PC multi-tasker. personally, im enjoying the PC way more. Those shears are freaking incredible. I started screwing around seeing what all it could cut like butter (which is basically everything) and I ended up putting some slices in my partners shoes... uh oh :< but seriously! like butter! also the s shaped design is awesome cause i like that i can open the knife without opening the whole tool. as well as the file and saw. the mp600 is nice but at the moment i seem to have more gripes than compliments it seems. mostly since i got it to be the base for my custom modded edc tool. (although the PC may end up that format as well!)
My gripes on the mp600 bladeless. Idk whats up but i cannot "flick" it open for the life of me.. I have tried endlessly, and im sure at this point its fairly broken in. it seems I can quite be sqeezing the handles when i flick but i cant push them open a little before i flick either.. it has to be "JUST A TEENY TINY BIT more open than all the way closed tight" for it to actually slide open.. and even then i still havent managed to get it to actually flick open.. any thoughts or suggestions? bad batch? can i fix it?
thats my biggest complaint... other than that.. the remgrit saw sucks ass... i dont know what it is supposed to saw but its freaking huge.. looks like its covered in sandpaper goop way too much of it. lastly none of the tools open easily at all i have to damn near pry them open and open all the tools on that side to get the one i need. too tight i guess.
The PC on the other hand.. also cant get it to flick but it seems like thats just cause its really tight. lets see... the file falls off easy when you open it.. oh and its tools are even tighter and harder to open. idk maybe i am just a weakling but is there any fixes for this at all anyone knows of? any suggestions? not a huge fan of the PC saw or knife either if some can reccomend a good upgrade to mod on for both been searching but cant figure what the best bet to buy is..
Anyway all in all I'm definetly proud and happy i went the gerber route.. i plan to get more soon too i love them! :D
The Multi-Tasker isn't a Gerber. You also can't flick it because it locks in the closed position. You'll notice it has notches at the bottom as well as the top. The bottle and can opener on mine are nearly impossible to deploy, but the rest of the tools are alright.
As for why you can't flick the MP600.. You probably just need to work on your technique.Gerber's manuals suggest grasping one handle, but I use the same method as Gareth;
https://www.youtube.com/watch?v=eSERk423X-Q
That's a Diesel, but it works on all my MP models.
Post by: Poncho65 on July 10, 2016, 04:38:39 AM
Post by: WoodsDuck on July 10, 2016, 07:59:12 AM
I need to get a pic of mine in here so I can join the 600 club :D
Yes you do. What are you waiting for, Ponch? :pok: :pok: :pok: :pok:
Post by: Poncho65 on July 10, 2016, 04:08:23 PM
I need to get a pic of mine in here so I can join the 600 club :D
Yes you do. What are you waiting for, Ponch? :pok: :pok: :pok: :pok:
:shrug:
I will try and get one this evening ;) :D
Post by: macabee on July 10, 2016, 05:18:34 PM
I have the S/S MP600 with the remgrit blade, needle nose plier head, no scissors, this was a set with the torch. I also have the BO 'Bladeless' to comply with UK knife laws. :multi:
Update: The MP600 family has increased!spot the interloper BTW the bladeless is on vacation
Post by: sawman on July 10, 2016, 05:19:54 PM
Post by: ThePeacent on July 10, 2016, 10:52:47 PM
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/20160227_125746_zpsaftwdidd.jpg)
They are rigtfully called the AK47s of multitools. Rough, but tough enough :salute:
Post by: Poncho65 on July 11, 2016, 02:59:48 AM
(http://i41.photobucket.com/albums/e276/poncho6556/Camera/1468196776921.jpg) (http://s41.photobucket.com/user/poncho6556/media/Camera/1468196776921.jpg.html)
(http://i41.photobucket.com/albums/e276/poncho6556/Camera/1468196796120.jpg) (http://s41.photobucket.com/user/poncho6556/media/Camera/1468196796120.jpg.html)
(http://i41.photobucket.com/albums/e276/poncho6556/Camera/1468196765960.jpg) (http://s41.photobucket.com/user/poncho6556/media/Camera/1468196765960.jpg.html)
Post by: thatotherguy on July 23, 2016, 02:20:24 AM
My gripes on the mp600 bladeless. Idk whats up but i cannot "flick" it open for the life of me.. I have tried endlessly, and im sure at this point its fairly broken in. it seems I can quite be sqeezing the handles when i flick but i cant push them open a little before i flick either.. it has to be "JUST A TEENY TINY BIT more open than all the way closed tight" for it to actually slide open.. and even then i still havent managed to get it to actually flick open.. any thoughts or suggestions? bad batch? can i fix it?It took me a day or two to get used to flicking open my 600 Bladeless. I found I was wrapping my hand around both handles and accidentally squeezing the handles together to keep it from flying across the room, which causes the pliers head to bind part of the way out (where depends on how hard you're squeezing the handles). Try just holding one handle on the sides, pinched between the thumb and fingers, and flick harder than you'd think you'd need to. You won't hurt it, and you'll be able to refine your technique as you go along.
thats my biggest complaint... other than that.. the remgrit saw sucks ass... i dont know what it is supposed to saw but its freaking huge.. looks like its covered in sandpaper goop way too much of it. lastly none of the tools open easily at all i have to damn near pry them open and open all the tools on that side to get the one i need. too tight i guess.
The Remgrit can be replaced with a normal saw blade of your choice, provided the saw blade you choose is a jigsaw blade with a "universal" U-shank with the hole in it, and not a holeless U-shank or a Bosch type T-shank. In other words, if the end going into the blade holder matches the Remgrit, it'll fit in the Gerber tool.
As for the Multitasker being tight, try giving it a liberal dose of a light oil (I'm partial to 3-in-1 but it isn't food safe- mineral oil works as well, and is food safe) and work the blades a bit to work the oil into the moving parts. That should help a bit, at least.
Post by: jerseydevil on July 23, 2016, 02:37:29 AM
Post by: Monrogue on July 23, 2016, 03:38:34 AM
Post by: sawman on July 23, 2016, 04:15:59 AM
Post by: zrxoa1 on October 31, 2016, 09:48:25 AM
I received my MP600, I think it is the Pro Scout model??, for free earlier this year. I bought a Skeletool CX from a guy on eBay. He forgot to include the second flat screwdriver bit. When he sent it, he also sent me the MP600 below. For free!
He did mention a problem with the knife blade...it is in bad shape. I just tossed it into the back of my multi tool/knife drawer and forgot about it.
I recently got a Leatherman OHT and really love it. That got me to thinking about the Gerber...so I have been playing with it a bit. I am a loooong time Leatherman guy, so this is new ground for me.
I am going to start carrying it to work just to get used to it. I could use some help with that knife blade though!! LOL
(http://uploads.tapatalk-cdn.com/20161031/8daab534d18b2ec028af1c3cefb189b3.jpg)(http://uploads.tapatalk-cdn.com/20161031/f5c5e08252ecf1c35d0569072a5d5245.jpg)(http://uploads.tapatalk-cdn.com/20161031/835d30452f4f59f909cd901186727314.jpg)(http://uploads.tapatalk-cdn.com/20161031/87d75fff2746d52a5ecfe375b2e904fd.jpg)
This is much easier to flik open than my OHT!
http://cloud.tapatalk.com/s/5817056ed1803/VID_20161031_044654.mp4 (http://cloud.tapatalk.com/s/5817056ed1803/VID_20161031_044654.mp4)
Sent from my Nexus 6 using Tapatalk
Post by: ThePeacent on October 31, 2016, 10:05:55 AM
Hmm, might as well join this club!
I received my MP600, I think it is the Pro Scout model??, for free earlier this year. I bought a Skeletool CX from a guy on eBay. He forgot to include the second flat screwdriver bit. When he sent it, he also sent me the MP600 below. For free!
He did mention a problem with the knife blade...it is in bad shape. I just tossed it into the back of my multi tool/knife drawer and forgot about it.
I recently got a Leatherman OHT and really love it. That got me to thinking about the Gerber...so I have been playing with it a bit. I am a loooong time Leatherman guy, so this is new ground for me.
I am going to start carrying it to work just to get used to it. I could use some help with that knife blade though!! LOL
(http://uploads.tapatalk-cdn.com/20161031/8daab534d18b2ec028af1c3cefb189b3.jpg)(http://uploads.tapatalk-cdn.com/20161031/f5c5e08252ecf1c35d0569072a5d5245.jpg)(http://uploads.tapatalk-cdn.com/20161031/835d30452f4f59f909cd901186727314.jpg)(http://uploads.tapatalk-cdn.com/20161031/87d75fff2746d52a5ecfe375b2e904fd.jpg)
This is much easier to flik open than my OHT!
http://cloud.tapatalk.com/s/5817056ed1803/VID_20161031_044654.mp4 (http://cloud.tapatalk.com/s/5817056ed1803/VID_20161031_044654.mp4)
Sent from my Nexus 6 using Tapatalk
That's it, also my newest MP600! :cheers:
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/CAM05806_zpswx8bhnrz.jpg)
I've had it for two months now and it is the smoothest opening Gerber I've had, it is so fun to play with.
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2016-09/CAM04493_zpsrr3fu1us.jpg)
The tool config. is perfect for me, and I got it mainly for the scissors + exchangeable saw blades option. The steel in the blade takes a really fine and sharp edge very quickly so I guess it'll be easy to reprofile. I would take it over the OHT to be honest, if only it had a OHO blade.
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2016-09/CAM04495_zpsdstpcqyi.jpg)
It's now my 2nd favorite MP after the Blunt Nosed one. Enjoy yours too :tu:
Post by: Spartan19 on November 08, 2016, 02:18:41 AM
Post by: jday2727 on November 29, 2016, 03:47:56 AM
Sent from my Z988 using Tapatalk
Post by: sawman on November 29, 2016, 06:45:46 AM
My absolute favorite although I have a couple fave's :D
Post by: clown on December 18, 2016, 07:50:40 PM
Post by: Gareth on December 18, 2016, 07:55:36 PM
Post by: clown on December 18, 2016, 08:18:40 PM
That's a beauty there Clown. :drool:
Thanks!
Post by: Spartan19 on December 22, 2016, 02:45:39 PM
Post by: ducttapetech on December 22, 2016, 03:02:25 PM
Post by: Spartan19 on December 22, 2016, 03:22:26 PM
Post by: Gareth on December 22, 2016, 03:42:09 PM
Nice pic!
Agreed. :tu:
Post by: SteveC on December 22, 2016, 04:28:44 PM
Nice pic!
Agreed. :tu:
(http://i.imgur.com/VeFruyEt.gif) (http://imgur.com/VeFruyE) as well :tu:
Post by: Spartan19 on December 23, 2016, 02:18:08 AM
Post by: Poncho65 on April 10, 2017, 04:34:16 PM
(https://c1.staticflickr.com/3/2836/33797298092_bc45472b07_z.jpg) (https://flic.kr/p/TuxZf5)20170410_085221 (https://flic.kr/p/TuxZf5) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Post by: Poncho65 on April 12, 2017, 05:15:09 PM
(https://c1.staticflickr.com/4/3930/33150305984_7d98bae7f4_z.jpg) (https://flic.kr/p/SvnZ2J)20170412_080731 (https://flic.kr/p/SvnZ2J) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Post by: zoidberg on April 13, 2017, 12:44:29 PM
Post by: Poncho65 on April 13, 2017, 04:36:42 PM
(https://c1.staticflickr.com/3/2805/33882325376_2791548e33_b.jpg) (https://flic.kr/p/TC4LTJ)
:dd: :like: :like:
Post by: Poncho65 on April 13, 2017, 04:37:02 PM
Post by: zoidberg on April 14, 2017, 01:23:09 PM
Post by: clown on April 14, 2017, 07:02:56 PM
Post by: Poncho65 on April 14, 2017, 11:13:41 PM
Post by: zoidberg on April 15, 2017, 07:04:12 AM
(https://c1.staticflickr.com/3/2892/34042964115_83e163528b_b.jpg) (https://flic.kr/p/TSg6ca)
Post by: Poncho65 on April 15, 2017, 11:56:36 AM
I took a pic with you in mind Poncho. ;) :D
(https://c1.staticflickr.com/3/2892/34042964115_83e163528b_b.jpg) (https://flic.kr/p/TSg6ca)
Awesome Zoid 8) Love those rock in the background :salute: :like: :like:
Post by: Poncho65 on April 15, 2017, 02:49:22 PM
Post by: zoidberg on April 15, 2017, 02:58:46 PM
Post by: zoidberg on April 16, 2017, 06:52:02 AM
Post by: zrxoa1 on April 16, 2017, 06:53:41 AM
Sent from my Nexus 6 using Tapatalk
Post by: Poncho65 on April 16, 2017, 04:21:16 PM
Post by: zoidberg on April 16, 2017, 10:38:56 PM
Post by: Poncho65 on April 17, 2017, 03:10:24 AM
Post by: Poncho65 on April 17, 2017, 03:34:12 PM
(https://c1.staticflickr.com/3/2913/33249144094_f2e9b9343b_z.jpg) (https://flic.kr/p/SE7ya5)20170416_133732 (https://flic.kr/p/SE7ya5) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
(https://c1.staticflickr.com/3/2899/33706776480_547dca8e74_z.jpg) (https://flic.kr/p/Tmy3jC)20170416_185513 (https://flic.kr/p/Tmy3jC) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Post by: ChrisEDC247 on April 18, 2017, 04:56:06 AM
Post by: Poncho65 on April 18, 2017, 11:51:20 AM
Post by: Poncho65 on April 18, 2017, 03:11:16 PM
Post by: MusicMen on April 19, 2017, 01:25:26 AM
Post by: zoidberg on April 19, 2017, 08:48:49 AM
Post by: dks on April 19, 2017, 10:32:24 AM
Post by: zoidberg on April 19, 2017, 10:40:16 AM
Post by: Poncho65 on April 19, 2017, 12:27:25 PM
Post by: zoidberg on April 19, 2017, 12:28:51 PM
Post by: Poncho65 on April 19, 2017, 03:44:05 PM
Cheers Poncho.
:hatsoff:
Post by: Poncho65 on April 19, 2017, 03:44:16 PM
Post by: dks on April 19, 2017, 03:47:48 PM
Post by: zoidberg on April 19, 2017, 03:48:53 PM
I just got spanked by a NZ woman.... anybody knows why ?? ??
Which one?
Post by: dks on April 19, 2017, 03:52:42 PM
Post by: zoidberg on April 19, 2017, 04:03:36 PM
Post by: dks on April 19, 2017, 04:05:28 PM
Post by: Poncho65 on April 19, 2017, 06:20:45 PM
Guess you could say you lobster then :whistle:
:rofl:
Post by: dks on April 19, 2017, 07:24:24 PM
Post by: zoidberg on April 20, 2017, 01:16:35 PM
Post by: Poncho65 on April 20, 2017, 04:13:52 PM
(https://c1.staticflickr.com/3/2916/33998619282_0c6eab41dd_b.jpg) (https://flic.kr/p/TNkP25)
:like: :like:
Post by: Poncho65 on April 20, 2017, 04:14:09 PM
(https://c1.staticflickr.com/3/2844/33347305143_ffb3829506.jpg) (https://flic.kr/p/SNME1X)20170420_085421 (https://flic.kr/p/SNME1X) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Post by: zoidberg on April 21, 2017, 09:13:02 AM
Post by: zoidberg on April 21, 2017, 09:14:30 AM
Post by: Poncho65 on April 21, 2017, 04:39:38 PM
(https://c1.staticflickr.com/3/2862/33329931144_597dffa863_b.jpg) (https://flic.kr/p/SMfBkf)
:tu: :like: :like:
Post by: Poncho65 on April 21, 2017, 04:39:50 PM
Post by: Poncho65 on April 22, 2017, 05:13:45 PM
Post by: clown on April 22, 2017, 09:11:26 PM
(http://i441.photobucket.com/albums/qq140/smcclown/20170422_111353.jpg) (http://s441.photobucket.com/user/smcclown/media/20170422_111353.jpg.html)
Post by: Poncho65 on April 23, 2017, 04:23:07 PM
Pro Scout!!!
(http://i441.photobucket.com/albums/qq140/smcclown/20170422_111353.jpg) (http://s441.photobucket.com/user/smcclown/media/20170422_111353.jpg.html)
Nice one clown :dd: :like: :like:
Post by: clown on April 23, 2017, 09:06:45 PM
(http://i.imgur.com/KRFCZhv.jpg)
Post by: Poncho65 on April 24, 2017, 02:58:48 AM
Thanks Poncho. Carried it again today. Helped me change a disposal for my mom.
(http://i.imgur.com/KRFCZhv.jpg)
Another great pic as well :tu: :like:
Post by: Poncho65 on April 24, 2017, 02:59:00 AM
Post by: zoidberg on April 24, 2017, 08:57:56 AM
Post by: Poncho65 on April 25, 2017, 03:14:22 AM
(https://c1.staticflickr.com/3/2858/34105091801_6ed4f277bf_b.jpg) (https://flic.kr/p/TXKvAa)
Great one Zoid :tu: :like: :like:
Post by: Poncho65 on April 25, 2017, 03:14:35 AM
Post by: Monrogue on April 25, 2017, 05:45:40 AM
Sent from my SM-G920R4 using Tapatalk
Post by: zoidberg on April 25, 2017, 10:50:29 AM
Post by: zoidberg on April 25, 2017, 10:55:46 AM
Post by: Poncho65 on April 25, 2017, 06:10:37 PM
(https://c1.staticflickr.com/3/2848/34257229035_edab208b6d_b.jpg) (https://flic.kr/p/UccfFV)
Nice one Zoid :like: :like:
Post by: Poncho65 on April 25, 2017, 06:10:55 PM
Post by: SteveC on April 25, 2017, 10:56:04 PM
Post by: SteveC on April 25, 2017, 10:57:41 PM
(http://i86.photobucket.com/albums/k115/asc67/DSC08084_zpshilkrgqd.jpg) (http://s86.photobucket.com/user/asc67/media/DSC08084_zpshilkrgqd.jpg.html)
Post by: zoidberg on April 25, 2017, 10:58:46 PM
(https://c1.staticflickr.com/3/2848/34257229035_edab208b6d_b.jpg)
Nice one Zoid :like: :like:
Cheers buddy. :drink:
Post by: MusicMen on April 25, 2017, 11:44:57 PM
I'm thinking about turning the plain blade into an awl since the MP600 is lacking in the pokie dept.Cool background!
(http://i86.photobucket.com/albums/k115/asc67/DSC08084_zpshilkrgqd.jpg) (http://s86.photobucket.com/user/asc67/media/DSC08084_zpshilkrgqd.jpg.html)
Good luck with the mod, :cheers:
Post by: Poncho65 on April 26, 2017, 01:02:22 AM
I'm thinking about turning the plain blade into an awl since the MP600 is lacking in the pokie dept.Cool background!
(http://i86.photobucket.com/albums/k115/asc67/DSC08084_zpshilkrgqd.jpg) (http://s86.photobucket.com/user/asc67/media/DSC08084_zpshilkrgqd.jpg.html)
Good luck with the mod, :cheers:
+1 :popcorn: :like: :like:
Post by: Poncho65 on April 26, 2017, 01:02:36 AM
(https://c1.staticflickr.com/3/2848/34257229035_edab208b6d_b.jpg)
Nice one Zoid :like: :like:
Cheers buddy. :drink:
:hatsoff:
Post by: Spartan19 on April 26, 2017, 02:57:04 AM
Post by: ChrisEDC247 on April 26, 2017, 05:44:53 AM
Here's my MP, along with my pioneer and my no 8, doing some home improvement work. :multi:
Very nice selection!
:like:
Post by: basilio on April 26, 2017, 09:41:53 AM
(http://i67.tinypic.com/2ikbbr.jpg)
Post by: zoidberg on April 26, 2017, 10:48:37 AM
Look what I found for sale (and bought) on local ebay :D
(http://i67.tinypic.com/2ikbbr.jpg)
That is awesome, very awesome. :like: :gimme:
Post by: Poncho65 on April 26, 2017, 11:58:54 AM
Look what I found for sale (and bought) on local ebay :D
(http://i67.tinypic.com/2ikbbr.jpg)
That is awesome, very awesome. :like: :gimme:
What Zoid said :o :dd: :like:
Post by: jaya_man on April 26, 2017, 01:23:07 PM
Not a standard pouch I pressume...
(https://uploads.tapatalk-cdn.com/20170426/d41279652ac67a214e72c1d21e16cbbe.jpg)(https://uploads.tapatalk-cdn.com/20170426/cc45448e06f141048acb9bbc9f8d0a9a.jpg)(https://uploads.tapatalk-cdn.com/20170426/8c1e86f016a5d5ea0c82163bf271407b.jpg)(https://uploads.tapatalk-cdn.com/20170426/e33f04fac721d3a89d28b294f5dfd6e4.jpg)(https://uploads.tapatalk-cdn.com/20170426/4272f95ba8e0f64daae39c5697288f57.jpg)
Pics are from seller...
Sent from my iPhone using Tapatalk
Post by: gregozedobe on April 26, 2017, 02:03:37 PM
Look what I found for sale (and bought) on local ebay :D
Quite a find ! :tu: Those Gerber TrailRiders are hard to find these days.
Post by: Poncho65 on April 26, 2017, 07:16:38 PM
Post by: Poncho65 on April 26, 2017, 07:16:52 PM
(https://c1.staticflickr.com/3/2851/33474409303_448874acc6.jpg) (https://flic.kr/p/T126DZ)20170426_102239 (https://flic.kr/p/T126DZ) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Post by: Monrogue on April 27, 2017, 12:53:49 AM
Look what I found for sale (and bought) on local ebay :DWhat is that tool that's deployed?
(http://i67.tinypic.com/2ikbbr.jpg)
Sent from my SM-G920R4 using Tapatalk
Post by: SteveC on April 27, 2017, 01:16:27 AM
Look what I found for sale (and bought) on local ebay :DWhat is that tool that's deployed?
(http://i67.tinypic.com/2ikbbr.jpg)
Sent from my SM-G920R4 using Tapatalk
Hoof pick
Post by: SteveC on April 27, 2017, 01:18:03 AM
I'm thinking about turning the plain blade into an awl since the MP600 is lacking in the pokie dept.
(http://i86.photobucket.com/albums/k115/asc67/DSC08084_zpshilkrgqd.jpg) (http://s86.photobucket.com/user/asc67/media/DSC08084_zpshilkrgqd.jpg.html)
And done
(http://i86.photobucket.com/albums/k115/asc67/Gerber%20awl%20mod/DSC08137_zpssph8y1g4.jpg) (http://s86.photobucket.com/user/asc67/media/Gerber%20awl%20mod/DSC08137_zpssph8y1g4.jpg.html)
Post by: Monrogue on April 27, 2017, 01:23:12 AM
Ah, thanks Steve :salute:Look what I found for sale (and bought) on local ebay :DWhat is that tool that's deployed?
(http://i67.tinypic.com/2ikbbr.jpg)
Sent from my SM-G920R4 using Tapatalk
Hoof pick
Sent from my SM-G920R4 using Tapatalk
Post by: jaya_man on April 27, 2017, 03:04:04 AM
Very nice jaya :o :like: :like:Thanks Poncho :cheers:
Sent from my iPhone using Tapatalk
Post by: Poncho65 on April 27, 2017, 04:12:26 AM
I'm thinking about turning the plain blade into an awl since the MP600 is lacking in the pokie dept.
(http://i86.photobucket.com/albums/k115/asc67/DSC08084_zpshilkrgqd.jpg) (http://s86.photobucket.com/user/asc67/media/DSC08084_zpshilkrgqd.jpg.html)
And done
(http://i86.photobucket.com/albums/k115/asc67/Gerber%20awl%20mod/DSC08137_zpssph8y1g4.jpg) (http://s86.photobucket.com/user/asc67/media/Gerber%20awl%20mod/DSC08137_zpssph8y1g4.jpg.html)
Nice close up of it Steve :dd: :like:
Post by: SteveC on April 27, 2017, 05:43:59 AM
Fixed the first pic
I'm thinking about turning the plain blade into an awl since the MP600 is lacking in the pokie dept.
(http://i86.photobucket.com/albums/k115/asc67/Gerber%20awl%20mod/DSC08084_zpshilkrgqd.jpg) (http://s86.photobucket.com/user/asc67/media/Gerber%20awl%20mod/DSC08084_zpshilkrgqd.jpg.html)
And done
(http://i86.photobucket.com/albums/k115/asc67/Gerber%20awl%20mod/DSC08137_zpssph8y1g4.jpg) (http://s86.photobucket.com/user/asc67/media/Gerber%20awl%20mod/DSC08137_zpssph8y1g4.jpg.html)
Post by: Spartan19 on April 27, 2017, 01:42:18 PM
Thanks Chris :tu:Here's my MP, along with my pioneer and my no 8, doing some home improvement work. :multi:
Very nice selection!
:like:
Post by: Poncho65 on April 27, 2017, 04:17:53 PM
Post by: Monrogue on April 27, 2017, 04:39:24 PM
(https://uploads.tapatalk-cdn.com/20170427/3ae0e846ac8ed63b4bcf2da49941d412.jpg)Sent from my SM-G920R4 using Tapatalk
Post by: Poncho65 on April 27, 2017, 08:22:11 PM
Post by: Monrogue on April 27, 2017, 08:42:05 PM
The two tone is nice Mons :dd: :like::cheers:
Sent from my SM-G920R4 using Tapatalk
Post by: zoidberg on April 28, 2017, 02:29:20 AM
Post by: Poncho65 on April 28, 2017, 04:56:35 AM
Post by: SteveC on April 28, 2017, 05:48:24 AM
Another great one Zoid :like: :like:
(http://i.imgur.com/VeFruyEh.gif) (http://imgur.com/VeFruyE)
Post by: Poncho65 on April 28, 2017, 10:04:25 PM
Post by: zoidberg on April 29, 2017, 10:30:39 AM
Another great one Zoid :like: :like:
(http://i.imgur.com/VeFruyEh.gif) (http://imgur.com/VeFruyE)
Thank you guys. :salute: :salute:
Post by: zoidberg on April 29, 2017, 10:31:39 AM
Post by: jaya_man on April 29, 2017, 11:34:55 AM
Just got back home and the courier delivered this today... my Multi-lock Scout... yipeee
(https://uploads.tapatalk-cdn.com/20170429/4929a4fdadfce32958ffffa38feaa885.jpg)
Sent from my iPhone using Tapatalk
Post by: jaya_man on April 29, 2017, 11:57:43 AM
(https://uploads.tapatalk-cdn.com/20170429/c5bf3708e9dd5afda014ba75cf983a6c.jpg)
Sent from my iPhone using Tapatalk
Post by: Poncho65 on April 29, 2017, 03:41:39 PM
And I love the new MP jaya :dd: :like:
Post by: Poncho65 on April 29, 2017, 03:42:26 PM
Post by: clown on April 29, 2017, 07:51:25 PM
Now I can officially join this club...
Just got back home and the courier delivered this today... my Multi-lock Scout... yipeee
(https://uploads.tapatalk-cdn.com/20170429/4929a4fdadfce32958ffffa38feaa885.jpg)
Sent from my iPhone using Tapatalk
That's pretty Cool! Is that a Pro Scout with an awk instead of a saw coupler? I don't think I've seen one before...
Post by: jaya_man on April 29, 2017, 09:10:54 PM
According to multitool wiki, this tool actually predates the MP600...Now I can officially join this club...
Just got back home and the courier delivered this today... my Multi-lock Scout... yipeee
(https://uploads.tapatalk-cdn.com/20170429/4929a4fdadfce32958ffffa38feaa885.jpg)
Sent from my iPhone using Tapatalk
That's pretty Cool! Is that a Pro Scout with an awk instead of a saw coupler? I don't think I've seen one before...
(https://uploads.tapatalk-cdn.com/20170429/f5ab61bc7069811f8abb98d4c2b095e0.png)
http://wiki.multitool.org/tiki-index.php?page=Multi-Plier+600
Sent from my iPhone using Tapatalk
Post by: clown on April 29, 2017, 10:09:15 PM
According to multitool wiki, this tool actually predates the MP600...Now I can officially join this club...
Just got back home and the courier delivered this today... my Multi-lock Scout... yipeee
(https://uploads.tapatalk-cdn.com/20170429/4929a4fdadfce32958ffffa38feaa885.jpg)
Sent from my iPhone using Tapatalk
That's pretty Cool! Is that a Pro Scout with an awk instead of a saw coupler? I don't think I've seen one before...
(https://uploads.tapatalk-cdn.com/20170429/f5ab61bc7069811f8abb98d4c2b095e0.png)
http://wiki.multitool.org/tiki-index.php?page=Multi-Plier+600
Sent from my iPhone using Tapatalk
Super cool! Thanks for the info!
Post by: zoidberg on April 29, 2017, 11:50:23 PM
Great pic Zoid :like: :like:
And I love the new MP jaya :dd: :like:
:cheers:
Post by: zoidberg on April 29, 2017, 11:51:33 PM
According to multitool wiki, this tool actually predates the MP600...Now I can officially join this club...
Just got back home and the courier delivered this today... my Multi-lock Scout... yipeee
(https://uploads.tapatalk-cdn.com/20170429/4929a4fdadfce32958ffffa38feaa885.jpg)
Sent from my iPhone using Tapatalk
That's pretty Cool! Is that a Pro Scout with an awk instead of a saw coupler? I don't think I've seen one before...
(https://uploads.tapatalk-cdn.com/20170429/f5ab61bc7069811f8abb98d4c2b095e0.png)
http://wiki.multitool.org/tiki-index.php?page=Multi-Plier+600
Sent from my iPhone using Tapatalk
And the diamond coated file?
Post by: tankerG on April 30, 2017, 12:52:44 AM
Both knife blades are jacked. The smooth blade is snapped off, the serrated blade looks like it's been sharpened many times. Since it's out of warranty, where can I buy some replacements? I'd like to try and buy blades I can slap right in before I try making some other tools for it.
Post by: jaya_man on April 30, 2017, 04:38:37 AM
Sure feels like a diamond file in one side... texture is smoother compared to the one on my Juice KF4... The tip is shaped like a chisel... although blunt...According to multitool wiki, this tool actually predates the MP600...Now I can officially join this club...
Just got back home and the courier delivered this today... my Multi-lock Scout... yipeee
(https://uploads.tapatalk-cdn.com/20170429/4929a4fdadfce32958ffffa38feaa885.jpg)
Sent from my iPhone using Tapatalk
That's pretty Cool! Is that a Pro Scout with an awk instead of a saw coupler? I don't think I've seen one before...
(https://uploads.tapatalk-cdn.com/20170429/f5ab61bc7069811f8abb98d4c2b095e0.png)
http://wiki.multitool.org/tiki-index.php?page=Multi-Plier+600
Sent from my iPhone using Tapatalk
And the diamond coated file?
(https://uploads.tapatalk-cdn.com/20170430/995aa2fa436b0fadade88a684824761b.jpg)(https://uploads.tapatalk-cdn.com/20170430/cb2d7656087bb24fb3a4eb613d57806f.jpg)
Sent from my iPhone using Tapatalk
Post by: jaya_man on April 30, 2017, 04:40:08 AM
Great pic Zoid :like: :like::cheers:
And I love the new MP jaya :dd: :like:
Sent from my iPhone using Tapatalk
Post by: jaya_man on April 30, 2017, 04:40:51 AM
:hatsoff:According to multitool wiki, this tool actually predates the MP600...Now I can officially join this club...
Just got back home and the courier delivered this today... my Multi-lock Scout... yipeee
(https://uploads.tapatalk-cdn.com/20170429/4929a4fdadfce32958ffffa38feaa885.jpg)
Sent from my iPhone using Tapatalk
That's pretty Cool! Is that a Pro Scout with an awk instead of a saw coupler? I don't think I've seen one before...
(https://uploads.tapatalk-cdn.com/20170429/f5ab61bc7069811f8abb98d4c2b095e0.png)
http://wiki.multitool.org/tiki-index.php?page=Multi-Plier+600
Sent from my iPhone using Tapatalk
Super cool! Thanks for the info!
Sent from my iPhone using Tapatalk
Post by: zoidberg on April 30, 2017, 04:46:18 AM
Sure feels like a diamond file in one side... texture is smoother compared to the one on my Juice KF4... The tip is shaped like a chisel... although blunt...According to multitool wiki, this tool actually predates the MP600...Now I can officially join this club...
Just got back home and the courier delivered this today... my Multi-lock Scout... yipeee
(https://uploads.tapatalk-cdn.com/20170429/4929a4fdadfce32958ffffa38feaa885.jpg)
Sent from my iPhone using Tapatalk
That's pretty Cool! Is that a Pro Scout with an awk instead of a saw coupler? I don't think I've seen one before...
(https://uploads.tapatalk-cdn.com/20170429/f5ab61bc7069811f8abb98d4c2b095e0.png)
http://wiki.multitool.org/tiki-index.php?page=Multi-Plier+600
Sent from my iPhone using Tapatalk
And the diamond coated file?
(https://uploads.tapatalk-cdn.com/20170430/995aa2fa436b0fadade88a684824761b.jpg)(https://uploads.tapatalk-cdn.com/20170430/cb2d7656087bb24fb3a4eb613d57806f.jpg)
Sent from my iPhone using Tapatalk
Just don't recall seeing it on other ML scouts. Score. Put an edge on mine.
(https://c1.staticflickr.com/3/2918/32968334464_36cc950879_b.jpg) (https://flic.kr/p/SeikeJ)
Post by: jaya_man on April 30, 2017, 04:52:06 AM
The seller thought it was an MP600 Basic til I corrected him. We were both looking at the multitool wiki...Sure feels like a diamond file in one side... texture is smoother compared to the one on my Juice KF4... The tip is shaped like a chisel... although blunt...According to multitool wiki, this tool actually predates the MP600...Now I can officially join this club...
Just got back home and the courier delivered this today... my Multi-lock Scout... yipeee
(https://uploads.tapatalk-cdn.com/20170429/4929a4fdadfce32958ffffa38feaa885.jpg)
Sent from my iPhone using Tapatalk
That's pretty Cool! Is that a Pro Scout with an awk instead of a saw coupler? I don't think I've seen one before...
(https://uploads.tapatalk-cdn.com/20170429/f5ab61bc7069811f8abb98d4c2b095e0.png)
http://wiki.multitool.org/tiki-index.php?page=Multi-Plier+600
Sent from my iPhone using Tapatalk
And the diamond coated file?
(https://uploads.tapatalk-cdn.com/20170430/995aa2fa436b0fadade88a684824761b.jpg)(https://uploads.tapatalk-cdn.com/20170430/cb2d7656087bb24fb3a4eb613d57806f.jpg)
Sent from my iPhone using Tapatalk
Just don't recall seeing it on other ML scouts. Score. Put an edge on mine.
(https://c1.staticflickr.com/3/2918/32968334464_36cc950879_b.jpg) (https://flic.kr/p/SeikeJ)
Looking at the tool compliments, think I might want to replace the lanyard ring holder with a wood saw... and look for plier heads with replaceable wire cutters... but not in a hurry... :cheers:
Sent from my iPhone using Tapatalk
Post by: Poncho65 on April 30, 2017, 04:32:39 PM
So many different Gerbers to track down with the best parts :ahhh :ahhh :ahhh :D
Post by: Poncho65 on April 30, 2017, 04:32:56 PM
Post by: jaya_man on April 30, 2017, 04:50:25 PM
Gotta love the diamond file :dd: :like: :like:A risk one has to take if hands are itching to mod... ah.. ah... ah
So many different Gerbers to track down with the best parts :ahhh :ahhh :ahhh :D
Sent from my iPhone using Tapatalk
Post by: Poncho65 on April 30, 2017, 08:02:03 PM
Gotta love the diamond file :dd: :like: :like:A risk one has to take if hands are itching to mod... ah.. ah... ah
So many different Gerbers to track down with the best parts :ahhh :ahhh :ahhh :D
Sent from my iPhone using Tapatalk
I am hoping that the itch will go away some after I get back to using some of my LM for a bit :ahhh :ahhh :D
Post by: MusicMen on May 01, 2017, 03:30:21 AM
Post by: zoidberg on May 07, 2017, 01:32:08 PM
Post by: Poncho65 on May 07, 2017, 03:48:54 PM
Post by: zoidberg on May 21, 2017, 11:35:02 AM
Post by: Poncho65 on May 23, 2017, 07:38:36 PM
Post by: Poncho65 on May 23, 2017, 07:39:04 PM
:nanadance: :nanadance:
Post by: SteveC on May 23, 2017, 10:10:33 PM
(https://c1.staticflickr.com/5/4173/34120632990_6f5c0024df_b.jpg) (https://flic.kr/p/TZ8arG)
Great pic :like: :tu:
Post by: zoidberg on May 24, 2017, 01:55:07 PM
Post by: clown on May 29, 2017, 06:04:25 PM
Post by: ThePeacent on May 29, 2017, 07:07:31 PM
Post by: MusicMen on May 29, 2017, 11:09:20 PM
Post by: rivercity on May 30, 2017, 05:59:49 AM
Thanks! :cheers:
Post by: zoidberg on May 30, 2017, 11:36:41 AM
On the carbide inserts, am I correct in guessing they are 1/4"? I dont have one yet, its a used one coming soon...... :tu:
Thanks! :cheers:
Cutting edge length? I'm thinking more 3/8 than 1/4".
Post by: AimlessWanderer on May 31, 2017, 12:02:18 AM
On the carbide inserts, am I correct in guessing they are 1/4"? I dont have one yet, its a used one coming soon...... :tu:
Thanks! :cheers:
If you mean inscribed circle, someone tried off the shelf inserts recently. There should be a thread on the alternatives they tried which specifies the insert size/type they tried
Post by: rivercity on June 02, 2017, 04:00:52 PM
This one was spotted pretty good, so I took it apart and scrubbed everything with oil and a scotchbrite pad. Have a like new tool now! When the other used one shows up, it will need some cleaning up too.
I have a question about the older style non insert wire cutters. The used one I have coming has a notch in it. If I take it into Gerber I live less than 5 miles from them) or send it in, will they replace the head with the old style, or the newer insert style?
(https://farm5.staticflickr.com/4272/34919195881_faa0c0b1a7_c.jpg)
(https://farm5.staticflickr.com/4286/34240494243_cfe7d15ab2_c.jpg)
Post by: rivercity on June 02, 2017, 07:03:28 PM
(https://farm5.staticflickr.com/4247/34890029962_ff0228b8ae_c.jpg)
:cheers:
Post by: magentus on June 06, 2017, 09:58:26 AM
Post by: magentus on June 06, 2017, 10:00:22 AM
Post by: magentus on June 06, 2017, 10:04:19 AM
Post by: SteveC on June 09, 2017, 03:18:51 PM
Post by: SteveC on June 09, 2017, 03:19:28 PM
(http://i.imgur.com/LGik9RDh.jpg)
(http://i.imgur.com/XoWbnTBh.jpg)
Post by: Poncho65 on June 11, 2017, 04:18:16 PM
Post by: magentus on June 15, 2017, 12:18:46 PM
Post by: Toolslinger on June 15, 2017, 12:55:22 PM
Post by: magentus on June 15, 2017, 01:13:17 PM
It's a Beast TS! I'm totally sold on Gerbers now. :salute:
Post by: Kev D on June 15, 2017, 01:56:53 PM
Post by: magentus on June 15, 2017, 02:21:13 PM
The plier heads on those look nice and chunky. Bet it makes it easier to flikyStill easing this one along - takes several flicks to fully deploy it, but that will improve in time.
How's the dental work holding up Kev? Fully recovered? :tu:
Post by: Kev D on June 15, 2017, 02:32:00 PM
The plier heads on those look nice and chunky. Bet it makes it easier to flikyStill easing this one along - takes several flicks to fully deploy it, but that will improve in time.
How's the dental work holding up Kev? Fully recovered? :tu:
Yep all good now thanks. Gums have stopped hurting from the injections already as well :tu:
Post by: magentus on June 15, 2017, 02:36:44 PM
No more sweets for you Kev :pok:
Post by: Kev D on June 15, 2017, 03:19:23 PM
:tu:
No more sweets for you Kev :pok:
I think it's cider rather than sweets :D :drink:
Post by: magentus on June 15, 2017, 03:20:28 PM
:D Been cleaning your teeth with it then? Stop that.:tu:
No more sweets for you Kev :pok:
I think it's cider rather than sweets :D :drink:
Post by: Kev D on June 15, 2017, 03:24:14 PM
:D Been cleaning your teeth with it then? Stop that.:tu:
No more sweets for you Kev :pok:
I think it's cider rather than sweets :D :drink:
drinking to much of it is what lead to the tooth needing a crown in the first place :drink:. What broke it was something hard in some battered fish. First bite and crunch, broken tooth.
Post by: magentus on June 15, 2017, 03:27:21 PM
At least you still have Pickled Onion Space Raiders - the healthy option.
Post by: Kev D on June 15, 2017, 03:29:08 PM
Yuk - hate it when that happens. Right, so no more cider, sweets, salad or fish young man.
At least you still have Pickled Onion Space Raiders - the healthy option.
:tu: brought them again today to go with my lunch
Post by: magentus on June 15, 2017, 03:37:54 PM
Are they still 10p?Yuk - hate it when that happens. Right, so no more cider, sweets, salad or fish young man.
At least you still have Pickled Onion Space Raiders - the healthy option.
:tu: brought them again today to go with my lunch
Post by: Kev D on June 15, 2017, 03:51:49 PM
Are they still 10p?Yuk - hate it when that happens. Right, so no more cider, sweets, salad or fish young man.
At least you still have Pickled Onion Space Raiders - the healthy option.
:tu: brought them again today to go with my lunch
No idea, my mum bought me three 10 packs :D
I swear she still thinks I'm 13 and not 43. But I'm not complaining
Edit: yep, a quid for a 10 pack at tesco's, i just checked https://www.tesco.com/groceries/product/details/?id=295709984
Post by: magentus on June 15, 2017, 03:56:50 PM
Practically giving them away! A 43 year old being treated like a 13 year old is only a problem when it comes to buying clothes. Power Ranger pants anyone? :DAre they still 10p?Yuk - hate it when that happens. Right, so no more cider, sweets, salad or fish young man.
At least you still have Pickled Onion Space Raiders - the healthy option.
:tu: brought them again today to go with my lunch
No idea, my mum bought me three 10 packs :D
I swear she still thinks I'm 13 and not 43. But I'm not complaining
Edit: yep, a quid for a 10 pack at tesco's, i just checked https://www.tesco.com/groceries/product/details/?id=295709984
Post by: magentus on June 16, 2017, 12:44:25 PM
Post by: ThePeacent on June 18, 2017, 12:41:33 PM
(http://i1314.photobucket.com/albums/t562/ThePeacent/Mobile%20Uploads/2017-06/20170605_101840_zpstyye25g1.jpg)
Post by: Spartan19 on June 19, 2017, 11:45:49 PM
Post by: zoidberg on June 19, 2017, 11:50:49 PM
I love this mp so much, I'm thinking about......ANOTHER CHALLENGE!!! :ahhh :ahhh :cheers:
Hold that thought then because there will be a July challenge...
Post by: Spartan19 on June 20, 2017, 01:06:08 AM
Post by: zoidberg on June 20, 2017, 01:07:38 AM
Sounds good to me. What's the challenge called? :multi:
It hasn't been named yet.
Post by: Spartan19 on June 20, 2017, 01:11:47 AM
Post by: MusicMen on June 20, 2017, 01:57:27 AM
What tool do you think it will be centered on? :facepalm: :rofl:Sounds good to me. What's the challenge called? :multi:
It hasn't been named yet.
Post by: MusicMen on June 20, 2017, 02:27:45 AM
What tool do you think it will be Centered on? :facepalm: :rofl:Sounds good to me. What's the challenge called? :multi:
It hasn't been named yet.
Maybe a big Diesel of a tool? :think: :rofl:
Something that appears with just a Flick? :whistle: :rofl:
Post by: Spartan19 on June 20, 2017, 02:41:35 AM
Post by: MusicMen on June 20, 2017, 02:45:16 AM
Hhmm...I wonder if it's just a BASIC challenge they're setting their Sights on :DProbably more of a high Octane challenge. :rofl:
Post by: Spartan19 on June 20, 2017, 02:48:05 AM
Hhmm...I wonder if it's just a BASIC challenge they're setting their Sights on :DProbably more of a high Octane challenge. :rofl:
:rofl: :rofl: I just hope it's not a Blunt force challenge!
Post by: MusicMen on June 20, 2017, 02:51:30 AM
:tu:Hhmm...I wonder if it's just a BASIC challenge they're setting their Sights on :DProbably more of a high Octane challenge. :rofl:
:rofl: :rofl: I just hope it's not a Blunt force challenge!
I hope we don't have to Needle people to join. :rofl: :rofl: :rofl:
Post by: Spartan19 on June 20, 2017, 02:54:31 AM
:tu:Hhmm...I wonder if it's just a BASIC challenge they're setting their Sights on :DProbably more of a high Octane challenge. :rofl:
:rofl: :rofl: I just hope it's not a Blunt force challenge!
I hope we don't have to Needle people to join. :rofl: :rofl: :rofl:
It might be an open and shut case, just a flick of the wrist :D
Post by: gregozedobe on June 20, 2017, 06:45:11 AM
Or is that just Fishing for a Technician(al) connection ?
Did the Archer's arrow hit the target ?
Post by: Spartan19 on June 21, 2017, 02:12:38 AM
Post by: magentus on June 21, 2017, 04:32:31 PM
Post by: Marcellus on June 22, 2017, 04:16:21 AM
I haven't seen my blade less MP600 in a long time.
It was in my favorite sheath as well ( horizontal carry)
I THOUGHT I looked everywhere 2 or 3 times.
I had just given up the search finally.
Lo and behold the MP600 was in the bottom of a box full of stuff I take to my gun range. ( Bag rests, targets, spotting scope, ear protection muffs etc )
The box was absent minded left in the garage last October and never brought in the house.
Went to my gun club today for the first time since that day in October .
Moral - Never give up, it's not lost, you are.
So after 8 months I am reunited with one of my favorite multitools .
Post by: MusicMen on June 22, 2017, 04:53:51 AM
Post by: Spartan19 on June 23, 2017, 10:53:18 PM
Post by: Spartan19 on June 26, 2017, 11:17:03 PM
Post by: MusicMen on June 27, 2017, 01:45:57 AM
Post by: MusicMen on July 04, 2017, 01:43:36 AM
Post by: magentus on July 04, 2017, 03:05:23 PM
Post by: magentus on July 07, 2017, 11:32:24 AM
Post by: ThePeacent on July 10, 2017, 06:43:44 PM
(http://i.imgur.com/wpvF9Rx.jpg)
Post by: Zephon on July 27, 2017, 04:10:24 AM
Monsoon season here and the rains are making itself felt all over! It's one of those days when an umbrella is just as needed as an MT :cheers:
*on a side note -- Gerber seems to have a very very very small customer base here in Manila. I don't think there are any "Authorized Resellers/Importers" so getting spare parts like Carbide Cutters is a pain. I'm not sure if there are also any viable replacement parts locally either (somebody in Manila let me know if there is!). Thinking of shattering the carbide cutters is enough to make you apprehensive in using the cutter parts.....
Post by: Spartan19 on August 30, 2017, 02:48:24 PM
Post by: AlephZero on August 30, 2017, 07:44:20 PM
(https://farm5.staticflickr.com/4284/35591700042_0d323ecb49_b.jpg)
(https://farm5.staticflickr.com/4281/34951530523_afec648acb_b.jpg)
(https://farm5.staticflickr.com/4137/34951530333_5d078c3f0a_b.jpg)
:cheers:
Cough..., Smurfbucket... Cough...
Post by: Spartan19 on August 30, 2017, 09:27:48 PM
Post by: jaya_man on October 29, 2017, 04:38:38 PM
A family pic...(https://uploads.tapatalk-cdn.com/20171029/f9ffacbf2ef6dc90a05758a9f75e7c24.jpg)
Sent from my iPhone using Tapatalk
Post by: ThePeacent on October 29, 2017, 08:15:48 PM
MP600 Basic Blunt Nose BO arrived today...(https://uploads.tapatalk-cdn.com/20171029/37acac165b07e70ab9c7661c9f0e0c9a.jpg)
A family pic...(https://uploads.tapatalk-cdn.com/20171029/f9ffacbf2ef6dc90a05758a9f75e7c24.jpg)
Sent from my iPhone using Tapatalk
great one! Mine is not BO, but these blunt nosed Gerbers are (quoting Powernoodle here) the AK47s of the Multitools. :salute:
(https://i.imgur.com/NhBqz1T.jpg)
they take a beating and come back for more
Post by: jaya_man on October 30, 2017, 06:09:12 AM
I can Imagine... carried it for today...(https://uploads.tapatalk-cdn.com/20171030/4a0950c3c86ed0a36a4624c939f5e6f2.jpg)MP600 Basic Blunt Nose BO arrived today...(https://uploads.tapatalk-cdn.com/20171029/37acac165b07e70ab9c7661c9f0e0c9a.jpg)
A family pic...(https://uploads.tapatalk-cdn.com/20171029/f9ffacbf2ef6dc90a05758a9f75e7c24.jpg)
Sent from my iPhone using Tapatalk
great one! Mine is not BO, but these blunt nosed Gerbers are (quoting Powernoodle here) the AK47s of the Multitools. :salute:
(https://i.imgur.com/NhBqz1T.jpg)
they take a beating and come back for more
Sent from my iPhone using Tapatalk
Post by: fireshaper on October 30, 2017, 05:43:57 PM
I thought I had lost my MP600, but after cleaning out a storage unit I found it once again! My life is whole!!
So glad to have this beauty to carry around again. I got it sometime in the 90s when I was in Boy Scouts and when I got married it was thrown into a box and put in storage at some point. Still has a few spots of rust on it, it needs a good deep cleaning. I did have to search around the forums on how to take the thing apart to get to some hard to reach places, those hinge pins are a pain to put back in!
Post by: magentus on November 01, 2017, 01:10:41 PM
Here's M'600 with the team:
Post by: ThePeacent on November 06, 2017, 02:01:12 PM
Post by: clown on November 11, 2017, 05:24:30 AM
Post by: ThePeacent on November 11, 2017, 01:46:19 PM
(http://i.imgur.com/CGjRc9x.jpg)
that human figure reminds me of the Fallout videogame drawings :ahhh
Post by: clown on November 11, 2017, 04:07:24 PM
(http://i.imgur.com/CGjRc9x.jpg)
that human figure reminds me of the Fallout videogame drawings :ahhh
I'm not familiar enough with Fallout. It's from a children's book called "The Dark" by Lemony Snicket. The artwork in it is quite wonderful.
Post by: ThePeacent on November 13, 2017, 12:33:07 PM
Post by: SteveC on November 13, 2017, 03:22:13 PM
Post by: ThePeacent on November 13, 2017, 09:56:37 PM
https://www.youtube.com/watch?v=W_cXzbq3FDM
Post by: Mechanickal on November 17, 2017, 05:35:37 PM
Post by: clown on November 24, 2017, 10:00:51 PM
Post by: gerleatherberman on December 04, 2017, 10:39:40 PM
Been enjoying the MP600 BNSS!
(https://farm5.staticflickr.com/4524/38122254774_2ce827330a_k.jpg) (https://flic.kr/p/215JwbJ)MP600 in a Tree (https://flic.kr/p/215JwbJ) by None (https://www.flickr.com/photos/alexkerhead/), on Flickr
Post by: clown on December 30, 2017, 02:06:10 AM
Post by: MusicMen on December 30, 2017, 02:14:32 AM
Post by: clown on December 30, 2017, 03:04:18 AM
Nice BO carry :like: :tu:
Thank you sir! :hatsoff:
Post by: gerleatherberman on December 30, 2017, 03:42:59 AM
(http://i.imgur.com/oYj8doT.jpg)Daaang! Nice setup!
Post by: clown on December 30, 2017, 05:37:49 AM
(http://i.imgur.com/oYj8doT.jpg)Daaang! Nice setup!
Thanks brother! :cheers:
Post by: gerleatherberman on December 31, 2017, 05:07:27 AM
Left to right.
Multi Lock SS NN.
MP600 SS NN
MP600 Sportsman SS NN.
MP600 Sight Tool BO NN.
Basic MP600 BO BN.
Basic MP600 SS BN.
Basic MP600 SS BN(one I actually use).
Post by: gerleatherberman on January 05, 2018, 04:55:28 AM
Pictured with BN SS MP600, NN SS MP600, NN SS Sportsmam, BN BO MP600, and NN BO Sight Tool MP600.
Post by: magentus on January 05, 2018, 10:35:58 AM
Post by: gerleatherberman on January 05, 2018, 01:34:12 PM
Sweet collection there GLBM :cheers: Love the BO MP'sThank you, magentus!
The BO MPs are really growing on me. :tu:
Next MP to get is a pro-scout. It will be a BO if possible. :drool:
Post by: ThePeacent on January 05, 2018, 01:59:17 PM
(https://i.imgur.com/ROo7bTc.jpg)
Post by: Spartan19 on January 08, 2018, 11:45:04 PM
Post by: MaverickMCS on January 12, 2018, 02:28:19 AM
(https://i.imgur.com/jiBTjcQ.jpg?1)
Post by: zoidberg on January 29, 2018, 11:59:41 AM
Post by: SteveC on January 29, 2018, 04:12:14 PM
Post by: ThePeacent on January 29, 2018, 06:43:47 PM
(https://farm5.staticflickr.com/4612/39065159025_4061dc1457_b.jpg) (https://flic.kr/p/22w49Lz)
very nice pic and colored theme! :salute:
:like:
Post by: zoidberg on January 29, 2018, 08:49:08 PM
Post by: Spartan19 on January 29, 2018, 11:18:20 PM
(https://farm5.staticflickr.com/4612/39065159025_4061dc1457_b.jpg) (https://flic.kr/p/22w49Lz)
:like: :tu:
Post by: MTFool on January 29, 2018, 11:39:11 PM
Post by: zoidberg on January 30, 2018, 11:31:10 AM
COOL pic zoidberg. What engine is that sitting on?
103 Fat Bob.
Post by: ddogu on January 30, 2018, 12:55:47 PM
(https://farm5.staticflickr.com/4612/39065159025_4061dc1457_b.jpg) (https://flic.kr/p/22w49Lz)
Nice!
I'm a DET owner but guess I'm gonna sell it after obtaining the MP600 badge :D :D
Post by: zoidberg on January 30, 2018, 01:13:48 PM
(https://farm5.staticflickr.com/4612/39065159025_4061dc1457_b.jpg)
Nice!
I'm a DET owner but guess I'm gonna sell it after obtaining the MP600 badge :D :D
I haven't had the DET version yet. Not that easy to find over here.
Post by: ddogu on January 30, 2018, 01:21:13 PM
(https://farm5.staticflickr.com/4612/39065159025_4061dc1457_b.jpg)
Nice!
I'm a DET owner but guess I'm gonna sell it after obtaining the MP600 badge :D :D
I haven't had the DET version yet. Not that easy to find over here.
Does that mean you're interested? :D
Post by: zoidberg on January 30, 2018, 01:31:44 PM
(https://farm5.staticflickr.com/4612/39065159025_4061dc1457_b.jpg)
Nice!
I'm a DET owner but guess I'm gonna sell it after obtaining the MP600 badge :D :D
I haven't had the DET version yet. Not that easy to find over here.
Does that mean you're interested? :D
I would only break it down for parts, better it stays with you.
Post by: magentus on January 30, 2018, 01:44:07 PM
Post by: jaya_man on January 30, 2018, 01:59:45 PM
Sent from my iPhone using Tapatalk
Post by: MTFool on January 30, 2018, 08:41:16 PM
I thought that was a harley. That makes it double nice. :tu:
Post by: zoidberg on January 30, 2018, 09:44:41 PM
What's a DET version? Gerber noob here.
For combat peeps: blast cap pliers, c4 punch etc.
Post by: magentus on January 30, 2018, 09:50:50 PM
4 hole punch? Useful for office bods maybe :DWhat's a DET version? Gerber noob here.
For combat peeps: blast cap pliers, c4 punch etc.
Post by: zoidberg on January 30, 2018, 10:00:59 PM
4 hole punch? Useful for office bods maybe :DWhat's a DET version? Gerber noob here.
For combat peeps: blast cap pliers, c4 punch etc.
No papers in a Uboat? :pok:
Post by: magentus on January 30, 2018, 10:06:39 PM
All spare paper gets reused in the 'powder' room if you know what I mean.4 hole punch? Useful for office bods maybe :DWhat's a DET version? Gerber noob here.
For combat peeps: blast cap pliers, c4 punch etc.
No papers in a Uboat? :pok:
Post by: zoidberg on January 30, 2018, 10:32:03 PM
All spare paper gets reused in the 'powder' room if you know what I mean.4 hole punch? Useful for office bods maybe :DWhat's a DET version? Gerber noob here.
For combat peeps: blast cap pliers, c4 punch etc.
No papers in a Uboat? :pok:
Save your time by adding speed holes...
Post by: Spartan19 on January 31, 2018, 11:33:38 PM
Post by: magentus on February 01, 2018, 10:08:14 AM
Post by: Spartan19 on February 01, 2018, 04:27:56 PM
Post by: magentus on February 02, 2018, 02:50:28 PM
Post by: jaya_man on February 02, 2018, 04:33:20 PM
Sent from my iPhone using Tapatalk
Post by: Tanstaafl on April 07, 2018, 01:45:59 PM
So was having a fondle , and I had happened to read a post a few weeks back about fakes from china, so the lack of a stamped USA logo is a major giveaway , so methinks I have a fake especially as the picture on Amazon had it stamped .
So looked for the other signs that it was a fake , and there were none (sheath quality, metal thickness and other little things mentioned in the post)
So this caught my eye...Would the fact that its made with global materials prevent them from putting the USA stamp on it ?
Bottom pic of my DET version
Post by: ThePeacent on April 07, 2018, 06:17:05 PM
Hi Guys this arrived yesterday from the states (Amazon.com) for a bargain price....
So was having a fondle , and I had happened to read a post a few weeks back about fakes from china, so the lack of a stamped USA logo is a major giveaway , so methinks I have a fake especially as the picture on Amazon had it stamped .
So looked for the other signs that it was a fake , and there were none (sheath quality, metal thickness and other little things mentioned in the post)
So this caught my eye...Would the fact that its made with global materials prevent them from putting the USA stamp on it ?
Bottom pic of my DET version
I can't answer the last question as I have no knowledge on the laws that regulate that, :think:
and congrats on your new Gerber, if you took a better (non blurry :P) pic and one with the tools out we'd be able to confirm its authenticity :salute:
Post by: Sam Lim on April 07, 2018, 07:03:16 PM
Post by: Syncop8r on April 07, 2018, 10:28:22 PM
Show content
Fake Leathermans :pommel:
Post by: Tanstaafl on April 08, 2018, 10:43:59 AM
The fake ones are painted. Authentic ones are black oxide coat. Easy way to find out, if yours is a new one, it will stain your hands as the coating will stain every thing when they are new. Yours should be authentic, from what I know, the fake ones comes with the rubbish half serrated blade. Yours is the Wharncliffe blade.
Cheers all , yep its genuine, got it confirmed on multiple sites........great tool for only $35 that's $47 shipped to the UK with customs charges included :like:
Post by: Sam Lim on April 08, 2018, 10:57:18 AM
Aren't all Gerbers fake?Show contentFake Leathermans :pommel:
:twak: :rofl:
Post by: ThePeacent on April 16, 2018, 02:01:14 PM
(https://i.imgur.com/RJf1WpR.jpg)
Post by: gerleatherberman on April 19, 2018, 03:31:54 AM
Post by: ThePeacent on April 19, 2018, 02:12:48 PM
Awesome pic, TP! I carried a 600 today as well with the 110. Good combo. :cheers:
they are a nice couple indeed :tu:
Post by: ThePeacent on April 23, 2018, 02:43:43 PM
Post by: gerleatherberman on April 23, 2018, 02:49:48 PM
(https://i.imgur.com/iNtWByW.jpg?1)That is a 'sweet' combinaation of tools, TP! :like:
Post by: ThePeacent on April 24, 2018, 02:01:37 PM
(https://i.imgur.com/iNtWByW.jpg?1)That is a 'sweet' combinaation of tools, TP! :like:
sweet indeed, :tu:
Nice to see you share your appreciation for the MPs' ugly appearance, their beauty relies on their performance :salute:
(https://i.imgur.com/kdxj1Cd.jpg)
Post by: gerleatherberman on April 24, 2018, 02:04:11 PM
:cheers: Thanks, TP! And beautiful picture! :tu:(https://i.imgur.com/iNtWByW.jpg?1)That is a 'sweet' combinaation of tools, TP! :like:
sweet indeed, :tu:
Nice to see you share your appreciation for the MPs' ugly appearance, their beauty relies on their performance :salute:
(https://i.imgur.com/kdxj1Cd.jpg)
I have grown to appreciate the looks of the MP600 as well. I have bought seven of then after all. :rofl:
Post by: Sam Lim on April 24, 2018, 04:58:46 PM
Post by: gerleatherberman on April 24, 2018, 10:20:23 PM
Hey! Who said that MPs are ugly! :twak:Comparatively. :whistle:
Post by: Sam Lim on April 25, 2018, 12:56:15 AM
Hey! Who said that MPs are ugly! :twak:Comparatively. :whistle:
:rofl:
Post by: ThePeacent on May 04, 2018, 12:19:51 PM
Post by: Barry Rowland on May 04, 2018, 02:46:01 PM
Post by: magentus on May 04, 2018, 03:40:12 PM
Post by: Barry Rowland on May 04, 2018, 09:56:38 PM
Post by: zoidberg on May 07, 2018, 08:49:32 AM
Post by: Barry Rowland on May 07, 2018, 04:01:39 PM
Post by: Barry Rowland on May 07, 2018, 04:39:00 PM
Post by: zoidberg on May 07, 2018, 10:06:29 PM
:like: Great pic Z Man!!
:cheers:
Post by: Spartan19 on May 14, 2018, 11:01:26 PM
Post by: Barry Rowland on May 15, 2018, 01:23:58 AM
Post by: Glockfan on May 15, 2018, 04:15:32 AM
Nice to be able to carry the 600 again :cheers:
:like:
Post by: Spartan19 on May 16, 2018, 07:27:17 PM
Post by: Sam Lim on May 17, 2018, 06:36:13 PM
Post by: gerleatherberman on May 18, 2018, 06:32:52 AM
Post by: gerleatherberman on May 18, 2018, 06:35:02 AM
Pic set 1/2.
Post by: gerleatherberman on May 18, 2018, 06:35:57 AM
Post by: Sam Lim on May 18, 2018, 06:51:47 AM
Hey had always wanted to ask, for the regular MPs, there are 2 types of brand stamping. One is just Gerber and the other shows the Logo and multiplier. Do they reflect different time period? I am really confused by them. The ones with the full Logo and multipliers are freaking awesome!
Btw, could u check yours with the awl, any diamond coated file there?
Post by: gerleatherberman on May 18, 2018, 07:11:35 AM
:like: :like: :like: that's quite the collection there. I love all my MPs too! I am trying hard to find a BO blunt nose without the replaceable cutter. Doesn't seems to show up anymore...At some point Gerber removed the U.SA. on some of the newer models in the last couple of years. It was replaced with the cool looking MultiPlier with logo. The Sight Tool is the oldest tool I have with that particular stamp. But, the Sight Tool has U.S.A. on it. The other tools with MultiPlier don't have U.S.A. stamped on them. Must have something to do with legislation limiting origination stamping in regards to the percent of parts actually made in the U.S. I didn't acquire any BO600s until more recently, so all of my BO600s have the new stamp. It is freaking awesome, indeed!
Hey had always wanted to ask, for the regular MPs, there are 2 types of brand stamping. One is just Gerber and the other shows the Logo and multiplier. Do they reflect different time period? I am really confused by them. The ones with the full Logo and multipliers are freaking awesome!
Btw, could u check yours with the awl, any diamond coated file there?
It makes the BO600EOD and BO600ST look even more "Military Tactical". :)
Maybe someone with some more extensive knowledge of MP600 will chime in at some point.
I only have one of the BN600s without replaceable cutters, and it is the one I use the most. Gerber pliers seem to be the most robust on almost any MT. The replaceable cutters are much weaker than the original style cutters. :(
Post by: Sam Lim on May 18, 2018, 12:41:19 PM
:like: :like: :like: that's quite the collection there. I love all my MPs too! I am trying hard to find a BO blunt nose without the replaceable cutter. Doesn't seems to show up anymore...At some point Gerber removed the U.SA. on some of the newer models in the last couple of years. It was replaced with the cool looking MultiPlier with logo. The Sight Tool is the oldest tool I have with that particular stamp. But, the Sight Tool has U.S.A. on it. The other tools with MultiPlier don't have U.S.A. stamped on them. Must have something to do with legislation limiting origination stamping in regards to the percent of parts actually made in the U.S. I didn't acquire any BO600s until more recently, so all of my BO600s have the new stamp. It is freaking awesome, indeed!
Hey had always wanted to ask, for the regular MPs, there are 2 types of brand stamping. One is just Gerber and the other shows the Logo and multiplier. Do they reflect different time period? I am really confused by them. The ones with the full Logo and multipliers are freaking awesome!
Btw, could u check yours with the awl, any diamond coated file there?
It makes the BO600EOD and BO600ST look even more "Military Tactical". :)
Maybe someone with some more extensive knowledge of MP600 will chime in at some point.
I only have one of the BN600s without replaceable cutters, and it is the one I use the most. Gerber pliers seem to be the most robust on almost any MT. The replaceable cutters are much weaker than the original style cutters. :(
Your BN w/o replaceable cutter is a BO?
I too cannot understand why they refuse to improve on the cutter. They just need to improve that small little part and make it commercially available. Is that really so hard to do....
Post by: gerleatherberman on May 18, 2018, 02:00:03 PM
Definitely would be nice if Gerber worked on it. Hopefully one day. :cheers:
Post by: ThePeacent on May 18, 2018, 02:16:02 PM
It's juat a SS BN600 w/ built in cutters. I forgot to add on the SS. :ahhh
Definitely would be nice if Gerber worked on it. Hopefully one day. :cheers:
love them pics, that's a :o collection. :like: You honor your username with it :cheers:
What would you say it's your favorite of the MP600s? :pok:
Post by: gerleatherberman on May 18, 2018, 02:20:40 PM
Many thanks, TP! :cheers:It's juat a SS BN600 w/ built in cutters. I forgot to add on the SS. :ahhh
Definitely would be nice if Gerber worked on it. Hopefully one day. :cheers:
love them pics, that's a :o collection. :like: You honor your username with it :cheers:
What would you say it's your favorite of the MP600s? :pok:
MP600SSBN and MP600BO Sight tool. :)
Post by: ThePeacent on May 19, 2018, 12:23:03 PM
Many thanks, TP! :cheers:It's juat a SS BN600 w/ built in cutters. I forgot to add on the SS. :ahhh
Definitely would be nice if Gerber worked on it. Hopefully one day. :cheers:
love them pics, that's a :o collection. :like: You honor your username with it :cheers:
What would you say it's your favorite of the MP600s? :pok:
MP600SSBN and MP600BO Sight tool. :)
BN FTW! :D Love Gerber's blunt nosed tools, they are unique in the market. Neither SOG, LM nor Vic do proper Blunt Nosed tools :tu:
Post by: gerleatherberman on May 19, 2018, 03:38:30 PM
That is definitely the best plier head for some applications. Whenever I do lamp restorations, and you cannot use NN pliers to remove 3/8" IPS nuts(tips go into a state of torsion), the BN pliers are perfect. I used the Pinchy BN pliers for years at my last job doing antique lighting repair. :cheers:
BN FTW! :D Love Gerber's blunt nosed tools, they are unique in the market. Neither SOG, LM nor Vic do proper Blunt Nosed tools :tu:
Post by: HarleyXJGuy on May 21, 2018, 05:47:03 AM
(https://i.imgur.com/iNtWByW.jpg?1)That is a 'sweet' combinaation of tools, TP! :like:
sweet indeed, :tu:
Nice to see you share your appreciation for the MPs' ugly appearance, their beauty relies on their performance :salute:
(https://i.imgur.com/kdxj1Cd.jpg)
Not ugly. They are the AK 47 of the Multi Tool world imo.
Post by: SteveC on June 02, 2018, 01:45:57 AM
Post by: ThePeacent on June 02, 2018, 01:38:01 PM
(https://i.imgur.com/RK9GNt2h.jpg)
badass :like:
Post by: ddogu on June 04, 2018, 09:56:10 AM
(https://i.imgur.com/iNtWByW.jpg?1)That is a 'sweet' combinaation of tools, TP! :like:
sweet indeed, :tu:
Nice to see you share your appreciation for the MPs' ugly appearance, their beauty relies on their performance :salute:
(https://i.imgur.com/kdxj1Cd.jpg)
Not ugly. They are the AK 47 of the Multi Tool world imo.
Well said! :salute:
Post by: JustSteve on July 01, 2018, 10:29:32 PM
Post by: ThePeacent on July 01, 2018, 10:45:35 PM
Would anyone know if this model this a MP600? I know for a FACT it is 22 years old. I picked it up in Okinawa Japan around 1995 or 96.. It is one tough MT. Only markings on it is, USA, Stainless, and of course the Gerber name. The closest MT it resembles is the MP600. It is government issue...I worked in supply, we get all the good stuff :D
MPT!!
:cheers:
Post by: JustSteve on July 01, 2018, 11:00:21 PM
Would anyone know if this model this a MP600? I know for a FACT it is 22 years old. I picked it up in Okinawa Japan around 1995 or 96.. It is one tough MT. Only markings on it is, USA, Stainless, and of course the Gerber name. The closest MT it resembles is the MP600. It is government issue...I worked in supply, we get all the good stuff :D
MPT!!
:cheers:
Thank you! I can now at least look at what other MPTs are out there. Like this one.
Post by: magentus on July 02, 2018, 10:22:13 AM
Post by: ThePeacent on July 02, 2018, 02:20:48 PM
(https://i.imgur.com/Qlh0Hsz.jpg)
Post by: clown on July 06, 2018, 08:51:35 PM
Post by: jaya_man on July 22, 2018, 08:25:37 AM
Post by: Sam Lim on July 22, 2018, 05:40:45 PM
Had some spare time this morning... switched the handles on these two...(https://uploads.tapatalk-cdn.com/20180722/96454a15266cf9a6bf526d789642b998.jpg)(https://uploads.tapatalk-cdn.com/20180722/28b62e6b7bc5d12cac6ae8305344ebcf.jpg)
:like: I really like the grey handle with the black pliers set up!
Post by: jaya_man on July 23, 2018, 02:53:25 AM
Post by: Alan K. on July 28, 2018, 11:43:42 PM
Post by: King on July 29, 2018, 01:32:32 PM
Post by: ChopperCharles on August 17, 2018, 11:15:38 PM
I had to mod the gerber MP600 to the fullest, I just need a better pocket clip. (http://tapatalk.imageshack.com/v2/14/11/02/bb0f9287fc43ff49670fd81db55ec526.jpg) Just like my new project Gerber Suspension with mods that are pending....(http://tapatalk.imageshack.com/v2/14/11/02/a09f56598d612a968c215d2a6ccde120.jpg)(http://tapatalk.imageshack.com/v2/14/11/02/996841263f59f2464f76b4f213bd5c8e.jpg)(http://tapatalk.imageshack.com/v2/14/11/02/8e5118592e9d88d554b2b819f6701f7a.jpg)(http://tapatalk.imageshack.com/v2/14/11/02/cc66ea327ef7f3dc819f3a7be46b0dda.jpg)(http://tapatalk.imageshack.com/v2/14/11/02/9bb633e172066e34d2abf399a4113ea7.jpg)
Where does one get those hacksaw blades for modding? I want a couple in various multi tools!
Charles.
Post by: SteveC on August 20, 2018, 04:38:13 PM
(https://i.imgur.com/405Cgs7h.jpg)
Post by: ChopperCharles on August 20, 2018, 05:49:24 PM
So anyways, this weekend was the first time I carried it on my person. I've been carrying a multi in a pouch on my belt for a loooong time, and it felt really nice to have that freed up, and still have a capable multitool with me. Of course, if I have a MT on my belt, I can have a nice folder clipped on my pocket, but everything is a compromise. With a SAK in the coin pocket and the MP600 deep in my front pocket, I felt far more comfortable, and yet still fully capable for most jobs. I still like my Coleman Pro Lock for its utility and versatility, especially with the extra modded cartridge I built, but the MP600 is beefier and it's a little more fun to play with. The inside-opening tools aren't that annoying because deploying the pliers is fun :)
So anyhow, I'm enjoying this MP600 quite a bit. Got a few saw blades on order and am thinking about a few other mods, but for the most part I'm happy with this thing now, and I intend to carry it more often in my rotation! Pics show clip and mods separately. Put the clip on after I took the mod photo.
Charles.
Post by: Juan el Boricua on August 25, 2018, 08:32:14 PM
Post by: Juan el Boricua on August 25, 2018, 08:35:24 PM
Post by: zoidberg on August 25, 2018, 11:29:12 PM
Post by: Rapidray on September 05, 2018, 06:53:33 AM
Post by: Dunc on September 26, 2018, 09:41:01 PM
Post by: AimlessWanderer on September 26, 2018, 11:20:05 PM
Evening , just got a MP600 basic , it’s been years since I had one and it feels like having an old friend back. Is it me or has Gerber build quality improved ?
Dunc! Hello mate :waving:
I reckon they're the same tank like quality they always were. The only real change, is it's hard to find a new 600 with integral cutters these days. Unfortunately, they've moved towards doing the evaporating carbide cutters as standard.
Post by: Dunc on September 27, 2018, 07:51:50 AM
Post by: Antonis Zita on November 23, 2018, 09:21:11 AM
I am a big fun of Mp600. I need more..
Post by: marko14 on November 23, 2018, 09:53:22 AM
I would like to join the club. :like:Coooooooool,like the yellow one,awesome.
I am a big fun of Mp600. I need more..
Sent from my SM-G960F using Tapatalk
Post by: Antonis Zita on November 23, 2018, 10:31:14 AM
I would like to join the club. :like:Coooooooool,like the yellow one,awesome.
I am a big fun of Mp600. I need more..
Sent from my SM-G960F using Tapatalk
:tu:
Post by: gregozedobe on November 23, 2018, 12:26:07 PM
I would like to join the club. :like:
I am a big fun of Mp600. I need more..
Nice find with the yellow MP600 :tu: - Gerber haven't made any of their coloured MP600s for many years now, but they do pop up from time to time. IIRC there was also Red, Dark Blue, Orange & Dark Green in the "Build your own Gerber" program. They also made some prototypes in other colours, but I think these never made it to large scale production. The Tan (Operation Iraqi Freedom) and Camo MP600s did make it to production (but are also uncommon).
Post by: Antonis Zita on November 23, 2018, 12:59:43 PM
I would like to join the club. :like:
I am a big fun of Mp600. I need more..
Nice find with the yellow MP600 :tu: - Gerber haven't made any of their coloured MP600s for many years now, but they do pop up from time to time. IIRC there was also Red, Dark Blue, Orange & Dark Green in the "Build your own Gerber" program. They also made some prototypes in other colours, but I think these never made it to large scale production. The Tan (Operation Iraqi Freedom) and Camo MP600s did make it to production (but are also uncommon).
Hi :salute: Gregozedobe and thanks,
This yellow MP was (until a year ago) available in a shop in my country. Unfortunately not any more. I regret for not buying at least one more piece. I have seen in the forum the other colored MPs and i want them all. But not an easy thing...
Post by: Sam Lim on December 19, 2018, 03:30:04 PM
(https://i.imgur.com/kjaV44L.jpg)
Post by: magentus on December 19, 2018, 04:04:22 PM
Post by: Sam Lim on December 19, 2018, 04:13:58 PM
That Yellow is lovely Sam! :salute:
:cheers: I can understand why they stop the production of these coloured ones. The paints chip so easily!
Post by: jaya_man on December 19, 2018, 04:18:16 PM
I wish Gerber comes out with a black one or BO with that plain brush stainless look on the pivot thingo that holds the handles together...
Post by: SteveC on December 20, 2018, 01:19:05 AM
Post by: Darrell85 on December 23, 2018, 04:02:18 AM
Post by: ThePeacent on December 23, 2018, 04:19:03 PM
I personally dont like carrying anything in a sheath on my belt and multitools keep getting sideways in my pocket so i have to add a pocket clip to everything including this 600 i had laying around. Btw Home Depot had a good deal on the 600 basic without the inserts this week... At least near me.
a most useful and needed MP600 mod!! :like: :multi:
Post by: HarleyXJGuy on December 25, 2018, 04:44:25 AM
Do tell.
Post by: gregozedobe on December 25, 2018, 10:58:02 AM
Tan OIF MP600?
Do tell.
See here for some photos (scroll down).
https://forum.multitool.org/index.php?topic=18487.0
They come up for sale on evilbay every now and then. The handles seem to discolour/get dirty when used.
Post by: HarleyXJGuy on December 27, 2018, 01:27:33 AM
Tan OIF MP600?
Do tell.
See here for some photos (scroll down).
https://forum.multitool.org/index.php?topic=18487.0
They come up for sale on evilbay every now and then. The handles seem to discolour/get dirty when used.
Thanks
Post by: gerleatherberman on January 18, 2019, 04:16:27 AM
The photos aren't good, because of the reflectivity of the paint, so will update those at some point.
I probably won't buy another one of the Gerber painted tools, as the paint looks too easy to chip(as is reported to chip easily) and they are pretty expensive. :ahhh
Glad to have this one though, as I liked this color combo since I started collecting MTs and saw several other big collector's examples. :)
(https://i.imgur.com/Tt29z29.jpg)
(https://i.imgur.com/jIHZsfU.jpg)
Shown with the red(cerakote) Snap-On.
(https://i.imgur.com/92iGg2n.jpg)
(https://i.imgur.com/h1rlAtr.jpg)
And an MP600 group pic.
(https://i.imgur.com/4eTXNFM.jpg)
Post by: Sam Lim on January 18, 2019, 04:56:09 AM
Added a 1998 Yellow factory-painted MP600. :woohoo:
The photos aren't good, because of the reflectivity of the paint, so will update those at some point.
I probably won't buy another one of their painted tools, as the paint looks too easy to chip and they cost too much for chipped finishes. :ahhh
(https://i.imgur.com/Tt29z29.jpg)
(https://i.imgur.com/jIHZsfU.jpg)
Shown with the red(cerakote) Snap-On.
(https://i.imgur.com/92iGg2n.jpg)
(https://i.imgur.com/h1rlAtr.jpg)
And an MP600 group pic.
(https://i.imgur.com/4eTXNFM.jpg)
:like: love all the MPs! They are such amazing but under rated tools. Yeah I feel you about the paint. It feels rubbery and I believe in bad conditions, they can peel... Bad choice of finish. But the snap on one is nice.
Post by: gerleatherberman on January 18, 2019, 05:37:50 AM
The paint looks pretty good on the one I received, but you can see some chipping in the slide rail. Just from being opened a few times. :ahhh
It would be awesome if Gerber rereleased the yellow MP600 in cerakote with BO pliers & tools(bumblebee special..hehe). :drool:
:iagree: have to agree on the under ratedness. The way they are constructed seems to make people, who aren't tool guys, think they are junk. Mainly because of the rattle in the plier head, and of course, the stupid fakes that are everywhere make people think MP600s are junk. :facepalm:
Post by: Sam Lim on January 18, 2019, 06:11:25 AM
Thank you, Sam! :cheers:
The paint looks pretty good on the one I received, but you can see some chipping in the slide rail. Just from being opened a few times. :ahhh
It would be awesome if Gerber rereleased the yellow MP600 in cerakote with BO pliers & tools(bumblebee special..hehe). :drool:
:iagree: have to agree on the under ratedness. The way they are constructed seems to make people, who aren't tool guys, think they are junk. Mainly because of the rattle in the plier head, and of course, the stupid fakes that are everywhere make people think MP600s are junk. :facepalm:
Being in a Asian country, there are probably more fakes than real ones around.. They give Gerber a very bad name.
Post by: gerleatherberman on January 18, 2019, 06:15:40 AM
Post by: badwolf on January 18, 2019, 12:50:59 PM
Added a 1998 Yellow factory-painted MP600. :woohoo:These are bloody gorgeous :drool:
The photos aren't good, because of the reflectivity of the paint, so will update those at some point.
I probably won't buy another one of the Gerber painted tools, as the paint looks too easy to chip(as is reported to chip easily) and they are pretty expensive. :ahhh
Glad to have this one though, as I liked this color combo since I started collecting MTs and saw several other big collector's examples. :)
(https://i.imgur.com/Tt29z29.jpg)
(https://i.imgur.com/jIHZsfU.jpg)
Shown with the red(cerakote) Snap-On.
(https://i.imgur.com/92iGg2n.jpg)
(https://i.imgur.com/h1rlAtr.jpg)
And an MP600 group pic.
(https://i.imgur.com/4eTXNFM.jpg)
I love these MP's, something about the look, feel and that rattle.
Could you tell me exactly where you keep them and when you're not at home >:D
Post by: gerleatherberman on January 18, 2019, 02:42:51 PM
Thank you for the kind words, badwolf! The 600 is a true workhorse. No bells and whistles. Just a bad-to-the-bone beast of MT burden. :cheers:
Post by: badwolf on January 22, 2019, 06:55:54 PM
(https://imgtc.com/i/h8lWfsK.jpg)
Post by: gerleatherberman on January 22, 2019, 11:07:22 PM
Just got this, Gerber Pro Scout with bit kit :tu:Very very nice. It looks like it is the older one with clip blade. If not, that is cool too. Nice find. :like:
(https://imgtc.com/i/h8lWfsK.jpg)
Post by: badwolf on January 23, 2019, 12:33:34 PM
Well spotted, it is indeed, found it on a classified ads, wasn't even looking for it but you know how it is :multi:Just got this, Gerber Pro Scout with bit kit :tu:Very very nice. It looks like it is the older one with clip blade. If not, that is cool too. Nice find. :like:
(https://imgtc.com/i/h8lWfsK.jpg)
Post by: gerleatherberman on January 24, 2019, 01:51:23 AM
The overall feel and noise the OG 600 makes is just a bit better than the newer ones. :)
Yes. I feel ya. Can't pass up a good deal(oh the shame). :facepalm: O.K. I'm not ashamed, because good tools for cheap are awesome. :D
Post by: gerleatherberman on January 25, 2019, 04:07:59 AM
(http://imgur.com/JfqDoS2.jpg)
(http://imgur.com/7YFDdCl.jpg)
(http://imgur.com/veiFFUk.jpg)
(http://imgur.com/LSMSYyV.jpg)
(http://imgur.com/HxCUdHD.jpg)
(http://imgur.com/UTwpH9E.jpg)
Post by: badwolf on January 25, 2019, 10:41:53 AM
Got in my $22 BO OGBN 600. Gave it a bath and mated it with a SS OGBN.:like:
(http://imgur.com/JfqDoS2.jpg)
(http://imgur.com/7YFDdCl.jpg)
(http://imgur.com/veiFFUk.jpg)
(http://imgur.com/LSMSYyV.jpg)
(http://imgur.com/HxCUdHD.jpg)
(http://imgur.com/UTwpH9E.jpg)
Post by: ThePeacent on January 25, 2019, 02:24:49 PM
Post by: gerleatherberman on January 25, 2019, 04:19:55 PM
Post by: gerleatherberman on February 04, 2019, 08:56:55 PM
(http://i.imgur.com/hDfFFNh.jpg)
(http://i.imgur.com/X6LoAIj.jpg)
(http://i.imgur.com/SolOM7r.jpg)
(http://i.imgur.com/BkyjM6x.jpg)
(http://i.imgur.com/DuAOIao.jpg)
Post by: rescue4500 on February 25, 2019, 05:05:41 AM
Sent from my iPhone using Tapatalk
Post by: gerleatherberman on February 25, 2019, 05:17:28 AM
Post by: Sam Lim on February 25, 2019, 04:56:37 PM
(https://i.imgur.com/L0NCQYD.jpg)
(https://i.imgur.com/SiM8dvY.jpg)
Post by: gregozedobe on February 26, 2019, 04:40:35 AM
Another one striked off the wish list! Mp600 Fisherman. :DMatching pair: MP400 & MP600 :tu:
Post by: Sam Lim on February 26, 2019, 05:04:13 AM
Matching pair: MP400 & MP600 :tu:
:hatsoff: now, waiting for a Filk Fisherman to appear..
Post by: gerleatherberman on February 26, 2019, 05:30:44 AM
Post by: Sam Lim on February 26, 2019, 05:37:04 AM
Sweet finds, Sam! :like::hatsoff:
Post by: rescue4500 on February 26, 2019, 07:17:31 PM
Post by: gerleatherberman on February 26, 2019, 07:49:37 PM
My first MT, and only one for over a decade, was an OG Multi-Plier. So I have a soft spot for the sliding pliers Gerbers. :)
Post by: gerleatherberman on March 10, 2019, 04:35:26 AM
Early Prototype MP600 with Maroon finish. This is a genuine example, with Simonds marked file and pliers head with sprue marks.
Thanks again to gregozedobe for messaging me about it. :cheers:
(https://i.imgur.com/bDbBSwQ.jpg)
(https://i.imgur.com/R6c3EZE.jpg)
(https://i.imgur.com/fbJpSI8.jpg)
(https://i.imgur.com/7AwsMWh.jpg)
(https://i.imgur.com/PoOly1Y.jpg)
And a couple of shots with the early yellow/black/SS MP600 and red-cerakote Snap-On SMT97R(MP600 chasis/pliers and special toolset).
(https://i.imgur.com/Ncdy6Fj.jpg)
(https://i.imgur.com/eGmKkyR.jpg)
Post by: gregozedobe on March 10, 2019, 04:58:37 AM
New addition:
Early Prototype MP600 with Maroon finish. This is a genuine example, with Simonds marked file and pliers head with sprue marks.
And a couple of shots with the early yellow/black/SS MP600 and red-cerakote Snap-On SMT97R(MP600 chasis/pliers and special toolset).
Nice MP600s :tu: :hatsoff:
Is the finish on the Maroon prototype some kind of hard finish (not soft, easily chipped paint) ?
I only just noticed the locking tabs on the Snap-On are different to the regular MP600s (and I have 3 of the Snap-On ones, got the first one back in 2016 ! )
Post by: gerleatherberman on March 10, 2019, 05:07:35 AM
Nice MP600s :tu: :hatsoff:Thank you, Greg! :cheers:
Is the finish on the Maroon prototype some kind of hard finish (not soft, easily chipped paint) ?
I only just noticed the locking tabs on the Snap-On are different to the regular MP600s (and I have 3 of the Snap-On ones, got the first one back in 2016 ! )
It appears to be more like a cerakote than an anodized(I am certain it is not anodized) or painted finish. It is quite tough and doesn't show the easy chipping of the yellow MP600(I checked with a very light knife scratch inside the handles). There is wear inside the handles where the pliers slide in and out(minimal though and only where the pressure is strongest), but I expect that with any non-oxide finish. My Snap-On has that already, just from opening it to take photos. The outside of the tool looks really good and has held up better in storage than the yellow/black/SS 600 has. :)
Post by: Sam Lim on March 10, 2019, 06:05:23 AM
Post by: gerleatherberman on March 10, 2019, 06:37:04 AM
Wow! I really :like: the colour here! The maroon looked terrible in the ebay listing! Congrats again for the new addition! :twak: on myself!!
Thanks, buddy! :cheers:
I kind of figured the listing photos were bad, because the SS tools has an "orangish" tint to them in the listing photos. It is a looker for sure, in person and in color-correct photos. :)
Well, I would say too bad/sorry, but you have some tools I cannot get my hands on as well. Cough.....fishermans....cough. :pok: :D
Post by: gerleatherberman on March 10, 2019, 11:25:14 AM
I only just noticed the locking tabs on the Snap-On are different to the regular MP600s (and I have 3 of the Snap-On ones, got the first one back in 2016 ! )
I also meant to mention that the first tool I know of that had the updated tabs was the MP600 Sight Tool(maybe 2014? That is when my U.S marked - updated Multi-Plier stamp - Sight Tool is dated). It seemed to coincide with the introduction of the fantastic huge combo-edge blade on the Sight Tool and Snap-On.
Post by: gerleatherberman on March 11, 2019, 08:40:54 PM
Here is a photo of the 600 Cable broken down. Note the heavily dinged up cutter.
(https://i.imgur.com/4jMt7EG.jpg)
After fine-filing(diamong coated needle files) the cutters back to the right profile, I replicated the Gerber finish on the jaws as closely as I can, but I haven't figured out a way to make it perfect yet. Close enough for this 600Cable Cutter to go into the collection. :)
The rest of the tools were wire-wheeled(varying brass or fine steel wheel) and oiled before reassembly.
(https://i.imgur.com/QPgQe7f.jpg)
Cutter Head close-up after reprofiling and finishing.
(https://i.imgur.com/MH1HBPE.jpg)
And a couple of shots with the MP650, which I also received a cable cutter head for.
(https://i.imgur.com/it3sykz.jpg)
(https://i.imgur.com/ofuxe93.jpg)
Post by: Mechanickal on March 11, 2019, 08:50:01 PM
:drool:
Post by: Sam Lim on March 12, 2019, 05:36:48 AM
Alright. After a lot of restoration work, I'd say the cutter head is at 98% of being unused.
Here is a photo of the 600 Cable broken down. Note the heavily dinged up cutter.
(https://i.imgur.com/4jMt7EG.jpg)
After fine-filing(diamong coated needle files) the cutters back to the right profile, I replicated the Gerber finish on the jaws as closely as I can, but I haven't figured out a way to make it perfect yet. Close enough for this 600Cable Cutter to go into the collection. :)
The rest of the tools were wire-wheeled(varying brass or fine steel wheel) and oiled before reassembly.
(https://i.imgur.com/QPgQe7f.jpg)
Cutter Head close-up after reprofiling and finishing.
(https://i.imgur.com/MH1HBPE.jpg)
And a couple of shots with the MP650, which I also received a cable cutter head for.
(https://i.imgur.com/it3sykz.jpg)
(https://i.imgur.com/ofuxe93.jpg)
:ahhh :ahhh I want one so bad!!
Post by: gerleatherberman on March 12, 2019, 06:21:15 AM
:sa:Thank you, Nick! :cheers:
:drool:
:ahhh :ahhh I want one so bad!!
Thank you much, Sam! :cheers:
I feel the same about the Fisherman tools you bought. Just super cool!
When I saw the listing for the Cable Cutter, I bought it without hesitation. Thankfully the tool turned out collection worthy. No parts needed changing out and the cutter head looks good. :)
Post by: Sam Lim on March 12, 2019, 06:55:02 AM
Thank you, Nick! :cheers:
Thank you much, Sam! :cheers:
I feel the same about the Fisherman tools you bought. Just super cool!
When I saw the listing for the Cable Cutter, I bought it without hesitation. Thankfully the tool turned out collection worthy. No parts needed changing out and the cutter head looks good. :)
Exact same thought when I saw the fisherman. But so far when I see the cable cutter on the bay, it's always price at a premium.. Even when usually my thinking "is buy once and get it over with" , its still too high.. :-\
Post by: gerleatherberman on March 12, 2019, 07:06:41 AM
Exact same thought when I saw the fisherman. But so far when I see the cable cutter on the bay, it's always price at a premium.. Even when usually my thinking "is buy once and get it over with" , its still too high.. :-\
Indeed. The Cable Cutters are usually insane. I paid $77 shipped for mine, so it was a decent deal. But, that being said, I put quite a bit of labor into the restoration. :ahhh
Post by: Sam Lim on March 12, 2019, 07:45:51 AM
Indeed. The Cable Cutters are usually insane. I paid $77 shipped for mine, so it was a decent deal. But, that being said, I put quite a bit of labor into the restoration. :ahhh
I, would had jumped on it at $77... Usually I see them at $120 up........ :facepalm:
Post by: gerleatherberman on March 12, 2019, 08:10:17 AM
Post by: Sam Lim on March 12, 2019, 09:02:09 AM
Hopefully you can find one soon! And I hope you don't have to put as much work into it as I did on mine. :ahhh
I hope so too. I dun mind restorations at all. As long as the rust does not set in too bad. Sometimes I buy beat up MT just for fun of cleaning them up.. :) they have to be at a fitting price of course.
Post by: gerleatherberman on March 12, 2019, 02:46:06 PM
I hope so too. I dun mind restorations at all. As long as the rust does not set in too bad. Sometimes I buy beat up MT just for fun of cleaning them up.. :) they have to be at a fitting price of course.:cheers:
Very true. I always go off of the condition of the plier head(if the head is salvageable) and the handle appearance.
I'm sure you know about the Gerber spotted fever as well. :facepalm:
I did take a gamble in the cutter tool. But, the tools as a whole had little noticeable Gerber fever and the fold out tools were unused. :woohoo:
Post by: Sam Lim on March 12, 2019, 03:14:40 PM
:cheers:
Very true. I always go off of the condition of the plier head(if the head is salvageable) and the handle appearance.
I'm sure you know about the Gerber spotted fever as well. :facepalm:
I did take a gamble in the cutter tool. But, the tools as a whole had little noticeable Gerber fever and the fold out tools were unused. :woohoo:
Yeah agree. Everything else can be easily replaced other than the pliers, in your case the precious cutter. The place I am at is known for humility... Not only Gerber fevers. Everything fevers.. :facepalm:
Post by: gerleatherberman on March 12, 2019, 03:20:42 PM
Yeah agree. Everything else can be easily replaced other than the pliers, in your case the precious cutter. The place I am at is known for humility... Not only Gerber fevers. Everything fevers.. :facepalm:Indeed! :ahhh
About the Gerber fever, have you figured out a way to remove some of the spots without disturbing the satin finish yet, Sam? I've got a couple of early 600s that are in great shape, but have the fever. Whenever I try to remove the spots, the satin turns to polished spots. :ahhh
Post by: Sam Lim on March 13, 2019, 07:32:06 AM
Indeed! :ahhh
About the Gerber fever, have you figured out a way to remove some of the spots without disturbing the satin finish yet, Sam? I've got a couple of early 600s that are in great shape, but have the fever. Whenever I try to remove the spots, the satin turns to polished spots. :ahhh
There's only one way to deal with the spot rusting.. The low light treatment.
Store all the MPs in low light area. Clean only under low light. U will not see the spots under low light. If u still sees them, you are doing it wrong again. Go lower light. :cheers:
Post by: gregozedobe on March 13, 2019, 09:11:18 AM
IMO they are really only fit for shelf queen duties ie for looking at as a different and unusual MT (and the buying public agreed, which is why Gerber no longer sells them). They look impressive with those great big cutter jaws, but weren't so good in actual use.
Post by: gerleatherberman on March 13, 2019, 02:22:26 PM
There's only one way to deal with the spot rusting.. The low light treatment.Thanks, Sam! Honest and humorous. :cheers:
Store all the MPs in low light area. Clean only under low light. U will not see the spots under low light. If u still sees them, you are doing it wrong again. Go lower light. :cheers:
Post by: gerleatherberman on March 13, 2019, 02:28:19 PM
The problem with the Gerber Cable Cutter head is that the cutters were designed to cut very soft copper cables, so as soon as someone uses them on any kind of steel (doesn't have to be hard) it damages the cutting edge, and they aren't simple to re-contour to restore the cutting edge.Thank you! Good information, Greg! :salute:
IMO they are really only fit for shelf queen duties ie for looking at as a different and unusual MT (and the buying public agreed, which is why Gerber no longer sells them). They look impressive with those great big cutter jaws, but weren't so good in actual use.
As easily as it was to remove a minute amount of material from the cutter during the restoration, I can see exactly what yiu mean. And indeed, the head definitely looks impressive, but as you said not practical. If I had one as my only MT with me, I'd be tempted to try cutting harder material. :facepalm:
A lot of the cable cutter probably got sent back to Gerber too, making them even more difficult to find. I feel lucky having gotten one I could bring back to decent collection-condition. :)
Post by: gerleatherberman on March 20, 2019, 06:56:59 AM
MP600 Cable Cutter close-ups.
(https://i.imgur.com/CtVv9wc.jpg)
(https://i.imgur.com/mUYJSQA.jpg)
(https://i.imgur.com/mkHfdA1.jpg)
(https://i.imgur.com/rnhijmI.jpg)
(https://i.imgur.com/dT7vU8M.jpg)
(https://i.imgur.com/uBCAA0r.jpg)
(https://i.imgur.com/MCXCGwu.jpg)
Post by: gerleatherberman on March 21, 2019, 02:47:03 AM
Camo MP600 Pro Scout.
(https://i.imgur.com/8N2F4a0.jpg)
(https://i.imgur.com/cJYJvPF.jpg)
(https://i.imgur.com/omQYQpZ.jpg)
(https://i.imgur.com/6K1pPJA.jpg)
(https://i.imgur.com/kFH0asy.jpg)
(https://i.imgur.com/AwErHxj.jpg)
Trailrider Multi-Lock - Early tool with Simonds file, and early Multi-Lock phillips driver.
(https://i.imgur.com/wQEAvYz.jpg)
(https://i.imgur.com/sdNso3T.jpg)
(https://i.imgur.com/NyMa7wk.jpg)
(https://i.imgur.com/X1pOOYr.jpg)
(https://i.imgur.com/aMUiwUL.jpg)
(https://i.imgur.com/JMJsQ5r.jpg)
(https://i.imgur.com/60YEXIP.jpg)
Post by: Sam Lim on March 21, 2019, 03:33:20 AM
Post by: sawman on March 21, 2019, 07:04:55 PM
Post by: gerleatherberman on March 21, 2019, 07:54:45 PM
:like: someone had been really busy eh. :DThanks, Sam! :cheers:
Busy indeed. :woohoo:
I had the very same model camo Pro Scout and the paint so easily chipped off that I was left with a steel one. No biggie - it was a high quality plier and I used the heck out of it. I’m still in awe of how tough these pinchies actually are :hats off:
So true. Gerber painted finishes are really crappy, but the tool is a beast for sure. A lot of people don't know how much abuse a Pinchy can take. :ahhh
Post by: sawman on March 21, 2019, 08:43:12 PM
Thanks, Sam! :cheers:
Busy indeed. :woohoo:
So true. Gerber painted finishes are really crappy, but the tool is a beast for sure. A lot of people don't know how much abuse a Pinchy can take. :ahhh
Not comparing apples and oranges but I see the prices appear more reasonable than certain competitors..... significantly
Post by: gerleatherberman on March 21, 2019, 09:27:30 PM
Post by: Sam Lim on March 31, 2019, 01:34:50 PM
(https://i.imgur.com/BozizEB.jpg)
(https://i.imgur.com/i45qpQP.jpg)
Post by: gerleatherberman on March 31, 2019, 01:36:35 PM
Post by: ThePeacent on April 02, 2019, 04:25:06 PM
Very nice work, Sam! :like:
:iagree: :gimme: :gimme:
Post by: Sam Lim on April 02, 2019, 04:36:29 PM
Post by: AimlessWanderer on April 02, 2019, 04:59:49 PM
Non-standard features are knifeless, two tone, integral cutters (which I don't think they sell anymore), wood saw, diamond file, awl, much better can opener (from a Strata), and tweezers. Excellent tool in my opinion, and all it needs to round it off is a traditional folder, for a fully capable combo that you can pretty much carry anywhere. Some of my knifeless mods need a little extra back up (the Fuse and Diesel mods need pairing with something that has a can opener), but a regular slippie is the only companion this needs.
Post by: gerleatherberman on April 02, 2019, 05:25:32 PM
They do still make the needle nose in non-replaceable, but not the BN.
I had never considered the Strata combo too, but it makes sense seeing it there. :)
Post by: AimlessWanderer on April 02, 2019, 05:39:35 PM
Excellent custom 600, AW! :tu:
They do still make the needle nose in non-replaceable, but not the BN.
I had never considered the Strata combo too, but it makes sense seeing it there. :)
Thanks mate :cheers:
The Strata can opener is one of the best can openers on any multitool IMHO. It's a thin but strong opener which pierces and cuts easily, and the grinding on the hook part gets hold of the underside of the lip better than most.
The saw on this came from a Strata too, which is slightly slimmer than a regular MP400/MP600 tool. The MP700 tweezers were the perfect thickness to take up the slack, as well as adding the extra function.
Post by: gerleatherberman on April 02, 2019, 06:08:33 PM
That is a noteably better toolset than the regular 600 bladeless. :)
Post by: gerleatherberman on April 04, 2019, 05:54:44 AM
(http://i.imgur.com/JJVvvhx.jpg)
Post by: David on April 04, 2019, 12:01:23 PM
Early MP600 Blunt Nose NIB came today. :woohoo:
(http://i.imgur.com/JJVvvhx.jpg)
Good score! :like:
Post by: gerleatherberman on April 04, 2019, 02:30:16 PM
Good score! :like:Thank you, David! :cheers:
Post by: gerleatherberman on May 09, 2019, 04:30:54 AM
Not great condition, but I'm a bit burned out on $100+ Gerbers. For $47, this is good enough for the collection. :)
(http://imgur.com/aZNYRcC.jpg)
(http://imgur.com/u0d58Fy.jpg)
(http://imgur.com/z7M9TJ5.jpg)
(http://imgur.com/P7WhwL3.jpg)
(http://imgur.com/ZI6jGEx.jpg)
(http://imgur.com/Q4uLK9i.jpg)
(http://imgur.com/3Icvm8u.jpg)
(http://imgur.com/5tdYf0r.jpg)
(http://imgur.com/pEWzkap.jpg)
Post by: gerleatherberman on May 31, 2019, 06:21:05 AM
FPR BN Multi-Lock(bottom) pictured with the NN FPR Multi-Lock(middle) and an older Multi-Lock production tool(top).
(https://i.imgur.com/52MgmAt.jpg)
(https://i.imgur.com/2PQHowq.jpg)
FPR NN and FPR BN same toolset. Note: The flat drivers are shorter on FPR Multi-Locks. Phillips is different as well(no fingernail catch), but same length.
(https://i.imgur.com/6FFIdPo.jpg)
(https://i.imgur.com/SmDd7an.jpg)
FPR Multi-Lock(left) and older Multi-Lock BN(right) drivers.
(https://i.imgur.com/RLIE5tF.jpg)
FPR Multi-Lock(bottom) and older Multi-Lock BN(top) drivers.
(https://i.imgur.com/bRQ7elM.jpg)
Post by: gerleatherberman on May 31, 2019, 06:24:43 AM
Note: Four users are the two top right and two bottom left. The rest are collection.
(https://i.imgur.com/Jh4XSvF.jpg)
(https://i.imgur.com/PMofAJM.jpg)
(https://i.imgur.com/E08tjRQ.jpg)
(https://i.imgur.com/L3mDfbH.jpg)
Gotta find the Fisherman now. :ahhh
Post by: Blackbeard on May 31, 2019, 08:48:35 AM
Post by: Sam Lim on May 31, 2019, 01:58:35 PM
Multi-Lock/MP600 stable currently. :ahhh
Note: Four users are the two top right and two bottom left. The rest are collection.
(https://i.imgur.com/Jh4XSvF.jpg)
(https://i.imgur.com/PMofAJM.jpg)
(https://i.imgur.com/E08tjRQ.jpg)
(https://i.imgur.com/L3mDfbH.jpg)
Gotta find the Fisherman now. :ahhh
:like: Amazing how the supposedly simple Multiplier spawned off so many variants eh! :ahhh :ahhh
Post by: gerleatherberman on May 31, 2019, 02:31:27 PM
wow, very impressive GLBM :hatsoff:Thank yiu, Blackbeard. :cheers:
:like: Amazing how the supposedly simple Multiplier spawned off so many variants eh! :ahhh :ahhhThank you, Sam! :cheers:
Indeed it is. :iagree:
The Multi-Lock and MP600 seem very consistent in terms of quality and price from 1998-2019, minus the swap to the wharncliffe blade. :ahhh
Post by: Juan el Boricua on June 03, 2019, 04:11:52 AM
Post by: zoidberg on June 03, 2019, 04:34:46 AM
Post by: Juan el Boricua on June 03, 2019, 04:37:50 AM
Ooops...my bad; May '17! :facepalm:
Post by: Sam Lim on June 03, 2019, 06:43:20 AM
Pretty sure Sam found some. He should be along shortly.
😁 Here u go.
https://forum.multitool.org/index.php/topic,78912.0.html
I had done some trial myself. Generally, I encountered 2 types of cloths hanger. One is a thinner type and another type that's tough as nails. I didn't have a caliper to measure them.. The stock carbide one can cut the thinner ones with no problem but how long it can keep going is another question. The one in the link can cut the thicker ones with no problem. It's a mystery metal, but will not shatter. Didn't dent in my test either. But then again, in my test, I realise the type of handle splay the MP series have is not really ideal for heavy cutter. That amount of splay doesn't allow me to maximise the gripping strength. From what I have handled, the LM core handles heavy cutting best. Comfy handle + perfect handle splay. OG Surge works pretty well too but for the newer ones, the handles opens too wide.
Post by: Juan el Boricua on June 03, 2019, 06:59:46 AM
Post by: Juan el Boricua on June 03, 2019, 07:01:17 AM
And yes, it would've been used more on the heavier type as it is used to make "flower stalk spikes" for orchids and garden stuff, and 12-16ga single and stranded Cu wires (old house; have both types in varying ga's! :dunno:).
Post by: Juan el Boricua on June 16, 2019, 01:48:23 AM
NIB Bladeless MP600 with my custom saw blade and bit kit!
May I rejoin?! :whistle:
Post by: gerleatherberman on June 16, 2019, 03:56:25 AM
Well, here's my submission for club membership renewal...!Nice addition, Juan! :cheers:
NIB Bladeless MP600 with my custom saw blade and bit kit!
May I rejoin?! :whistle:
The bladeless 600 is a favorite of mine. Paired with a rugged folding knife, it is probably the most reliable MT setup currently made. :)
Post by: Juan el Boricua on June 16, 2019, 04:00:06 AM
And thank you! :cheers:
The thing is that since now I'm working in a school setting, this is as "rugged" as I can go! :rofl:
Post by: gerleatherberman on June 16, 2019, 04:45:46 AM
:iagree::cheers:
And thank you! :cheers:
The thing is that since now I'm working in a school setting, this is as "rugged" as I can go! :rofl:
Understood! :ahhh
Bet the 600 is a big hit with the class when the pliers pop out. :multi:
Post by: Juan el Boricua on June 16, 2019, 05:07:36 AM
I used "cautiously" the bladed BO MP600 for almost a year and a half on school equipment, children's w/c or walkers, and for crafts! (Those wharncliffe and sheepsfoot blades excelled over the EAB's).
Still it's good to be able to help once in awhile, when least expected. And those Gerbers help me be that person.
Post by: gerleatherberman on June 16, 2019, 05:43:50 AM
Only time I have no MT on me is when I am sleeping. And even then, one is not far away, in the unlikely even one would be needed in the middle of the night. :)
Post by: Dunc on June 22, 2019, 08:37:49 AM
Post by: clown on June 24, 2019, 02:29:03 AM
Post by: gerleatherberman on June 24, 2019, 04:00:38 AM
So I’ve just got a Bladeless MP600 and I’m really looking forward to the release of the Gerber Straightlace and Wingtip slipjoint knives. They are just what I need to pair with the MP600 for a perfect UK legal EDC. Hope I don’t have to wait too long before they are availableHere's to hoping they become available sooner than later. :cheers:
(http://i.imgur.com/FU5fwal.jpg):like:
Post by: Dunc on June 24, 2019, 02:32:58 PM
(https://live.staticflickr.com/65535/48119820521_4491ceaad6_k.jpg) (https://flic.kr/p/2gjbEaX)F1CA9521-BD85-4339-9A9C-32031F9D017B (https://flic.kr/p/2gjbEaX) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
(https://live.staticflickr.com/65535/48119849533_e45c5c04c0_k.jpg) (https://flic.kr/p/2gjbNNa)A2F9AD82-BDB0-4FA3-9E96-13B92D0C49B9 (https://flic.kr/p/2gjbNNa) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
(https://live.staticflickr.com/65535/48119850628_2632914b57_k.jpg) (https://flic.kr/p/2gjbP83)D18EC79B-BA2D-4515-A77E-6C2758E6DA46 (https://flic.kr/p/2gjbP83) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
(https://live.staticflickr.com/65535/48119850398_63f2893bbb_k.jpg) (https://flic.kr/p/2gjbP45)4CC0B31D-DF14-40C0-BE59-492E3D334505 (https://flic.kr/p/2gjbP45) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
(https://live.staticflickr.com/65535/48119819216_4455f063ca_k.jpg) (https://flic.kr/p/2gjbDMs)6370C2E4-2F0C-45A3-A627-8737BD90FCCD (https://flic.kr/p/2gjbDMs) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
Post by: cody6268 on June 24, 2019, 03:37:50 PM
Post by: Dunc on June 24, 2019, 03:44:41 PM
Post by: Ivo on June 25, 2019, 08:20:45 PM
Post by: gerleatherberman on June 26, 2019, 03:39:10 AM
Bought last week :hatsoff:Nice one! :like:
Post by: Dunc on June 26, 2019, 08:51:42 AM
Bought last week :hatsoff:
What are your thoughts so far ?
Post by: Ivo on June 26, 2019, 11:09:59 AM
Post by: Ivo on June 26, 2019, 11:10:51 AM
What are your thoughts so far ?
It looks solid to me but I think LM is better. :hatsoff:
Post by: ChopperCharles on June 26, 2019, 06:21:14 PM
Charles.
Post by: gerleatherberman on June 26, 2019, 07:00:05 PM
Post by: Dunc on June 26, 2019, 07:00:30 PM
Post by: ChopperCharles on June 26, 2019, 07:31:22 PM
Charles.
Post by: gerleatherberman on July 03, 2019, 05:32:03 AM
Cable Cutter, FPR BN, Trailrider, and Fisherman.
(http://i.imgur.com/qT7rtD4.jpg)
Top(yellow) early Multi-Lock.
Bottom(Camo) Woodsman.
Left to right of the others.
CableCutter, FPR BN, BO BN w/carbides, Trailrider, Maroon prototype multi-lock, Snap-On SM97, DET, and Fisherman.
(http://i.imgur.com/jizGyg2.jpg)
Post by: gregozedobe on July 03, 2019, 08:12:08 AM
Playing around with some of the 600s tonight.
Cable Cutter, FPR BN, Trailrider, and Fisherman.
Top(yellow) early Multi-Lock.
Bottom(Camo) Woodsman.
Left to right of the others.
CableCutter, FPR BN, BO BN w/carbides, Trailrider, Maroon prototype multi-lock, Snap-On SM97, DET, and Fisherman.
Some nice Gerbers there ! :hatsoff:
Post by: gerleatherberman on July 03, 2019, 02:10:25 PM
Some nice Gerbers there ! :hatsoff:Many thanks, Greg! :cheers:
Post by: David on July 04, 2019, 04:26:10 AM
Playing around with some of the 600s tonight.
Cable Cutter, FPR BN, Trailrider, and Fisherman.
(http://i.imgur.com/qT7rtD4.jpg)
Top(yellow) early Multi-Lock.
Bottom(Camo) Woodsman.
Left to right of the others.
CableCutter, FPR BN, BO BN w/carbides, Trailrider, Maroon prototype multi-lock, Snap-On SM97, DET, and Fisherman.
(http://i.imgur.com/jizGyg2.jpg)
Lot of good Gerbers GLBM.
Post by: gerleatherberman on July 04, 2019, 04:39:01 AM
Lot of good Gerbers GLBM.Many thanks, David! :cheers:
Post by: Juan el Boricua on July 04, 2019, 04:50:03 AM
Looking good, Chief!
:hatsoff:
Post by: gerleatherberman on July 04, 2019, 05:17:11 AM
:drool:Thank you much, Juan! :cheers:
Looking good, Chief!
:hatsoff:
Post by: ChopperCharles on July 06, 2019, 04:02:12 AM
Charles.
Post by: gerleatherberman on July 06, 2019, 05:29:51 AM
Some of the rare ones have small differences that are minor, but indicate the age/stage of the Multi-Lock/MP600 series. Several of the rare tools have the same basic toolset as the regular 600s, but several have differences like an awl, blade exchanger, hook pick, combo blade, scissors, etc, etc.
Pics.
(https://i.imgur.com/VmfGb5a.jpg)
(https://i.imgur.com/RO4R5IK.jpg)
(https://i.imgur.com/Da0rSHF.jpg)
(https://i.imgur.com/9w1gD3h.jpg)
(https://i.imgur.com/nTOxlJP.jpg)
(https://i.imgur.com/kB77RXl.jpg)
(https://i.imgur.com/63kv3S3.jpg)
(https://i.imgur.com/GtsvQza.jpg)
(https://i.imgur.com/BkqSRGB.jpg)
(https://i.imgur.com/GxInaZ5.jpg)
(https://i.imgur.com/ng9BEPZ.jpg)
(https://i.imgur.com/FEqWP6V.jpg)
Post by: ChopperCharles on July 06, 2019, 05:57:48 AM
The fisherman is cool too. File has a fish hook sharpener groove. Is it a diamond file?
I have a sight tool on the way, actually. How rare is that? I was going to mod it, but if it’s super rare and expensive I might not.
Charles.
Post by: gerleatherberman on July 06, 2019, 07:26:32 AM
Very cool. I love the awl, that is a really useful tool. Looks like it could ream/drill a nice hole in wood, punch a hole in a belt, and also be used to sew in a pinch.The awl is indeed pretty good. :)
The fisherman is cool too. File has a fish hook sharpener groove. Is it a diamond file?
I have a sight tool on the way, actually. How rare is that? I was going to mod it, but if it’s super rare and expensive I might not.
Charles.
The file on the Fisherman has a diamond side and chisel tip. Pretty cool design I wish Gerber had incorporated into more 600 versions. :multi:
The Sight Tool isn't collectible rare yet, because they still make them. I included it mainly because there are hundreds of Basic MP600s for every one Sight Tool made. The Sight Tool and Snap-On are the best of the bunch for availability and usability. They both also have the updated lock tabs with the huge blades. Great tools and nice to use. Just be careful adapting the sight mount for a bit driver. It may not be tempered like the regular Gerber drivers(it can be used that way, but not for heavy duty driving), based off of experiences I've read. :ahhh
The blunt plier head will work in the sight tool and Snap-On as well if you want to use it in the frame. :woohoo:
Post by: gerleatherberman on July 09, 2019, 05:24:07 AM
Think I can handle that request, Charles. :)
Some of the rare ones have small differences that are minor, but indicate the age/stage of the Multi-Lock/MP600 series. Several of the rare tools have the same basic toolset as the regular 600s, but several have differences like an awl, blade exchanger, hook pick, combo blade, scissors, etc, etc.
Pics.
(https://i.imgur.com/VmfGb5a.jpg)
(https://i.imgur.com/RO4R5IK.jpg)
(https://i.imgur.com/Da0rSHF.jpg)
(https://i.imgur.com/9w1gD3h.jpg)
(https://i.imgur.com/nTOxlJP.jpg)
(https://i.imgur.com/kB77RXl.jpg)
(https://i.imgur.com/63kv3S3.jpg)
(https://i.imgur.com/GtsvQza.jpg)
(https://i.imgur.com/BkqSRGB.jpg)
(https://i.imgur.com/GxInaZ5.jpg)
(https://i.imgur.com/ng9BEPZ.jpg)
(https://i.imgur.com/FEqWP6V.jpg)
I need to apologize for the mindless error I made in the tool labeling. The Camo "Woodsman" isn't a Woodsman. It is a Camo "Pro Scout ".
Sorry about that. I will delete the photo from imgur immediately.
Another case of me falling victim to taking a seller's words at face value and not checking things as thoroughly as possible.
Again. Sorry about that. Lots to learn, but getting there. :)
Post by: ChopperCharles on July 15, 2019, 04:19:32 PM
Charles.
Post by: gerleatherberman on July 15, 2019, 04:37:28 PM
One thing about the scraper tool though. It is a mild steel, but could possibly be tempered. Though the lack of information on the scraper's mild steel composition is unknown as far as I know(maybe someone else knows). :dunno:
Post by: JonesE on July 16, 2019, 01:56:24 AM
JonesE
Post by: ChopperCharles on July 16, 2019, 08:28:33 AM
Charles.
Post by: ChopperCharles on July 17, 2019, 10:08:42 PM
In the pic you can see the tip sitting almost against the jaws. There is less than 1mm between the jaws and the tip. The awl tool is next to the file tool. It does not work next to the scissors. I haven’t tested it next to any of the blades yet.
You’ll also need to shim it properly so there’s not too much empty space on the fixed side of the pivot, which may move the tool closer to the center.
Charles.
Post by: Top-Gear-24 on July 17, 2019, 10:26:34 PM
I really like the awl on the CD myself.
Post by: gerleatherberman on July 17, 2019, 10:52:40 PM
That CD awl is the best plastic drilling awl I've used. The ultra pointy tip and good steel temper make a difference. :)
Post by: ChopperCharles on July 18, 2019, 04:59:37 AM
Charles.
Post by: ChopperCharles on July 21, 2019, 07:16:21 AM
Then of course I had to add a pocket clip as well. Trying a new one this time. It’s a third the cost of the clips I’ve been using ($10 shipped vs $23+$6 shipping) and it’s black, which works well on this contrasting Tool. It’s not as nice as the titanium clips I’ve been using, but on a bitsa tool like this, made from other tools’ leftover parts, it works.
Thing is, except for those silver scissors, this is really nice now!
Charles.
Post by: gerleatherberman on July 21, 2019, 10:58:03 AM
I snagged a near mint black oxide mp400 for the paltry sum of $9 (shipped!) to use as a donor for the scissors i added to the sight tool mod above. Well, I happened to have a spare silver mp600 handle and the needle nose I removed from the sight tool. So I moved the parts from the mp400 over to this tool, and then I went ahead and made it bladeless and added a file and the scraper from the sight tool. I had some silver scissors so I tossed them in too.
Then of course I had to add a pocket clip as well. Trying a new one this time. It’s a third the cost of the clips I’ve been using ($10 shipped vs $23+$6 shipping) and it’s black, which works well on this contrasting Tool. It’s not as nice as the titanium clips I’ve been using, but on a bitsa tool like this, made from other tools’ leftover parts, it works.
Thing is, except for those silver scissors, this is really nice now!
Charles.
Very nice work, Charles! Two nice custom 600s now! :like:
Post by: clown on July 21, 2019, 11:05:00 PM
Post by: ChopperCharles on July 22, 2019, 04:59:57 AM
Charles.
Post by: ChopperCharles on July 24, 2019, 10:32:55 PM
I’m not sure about EDCing it though. I prefer a saw over a blade, as I always have a blade on me of one sort or another. But this has the super long ST blade, so it’s actually far more useful than a normal mp600 blade. Stil... if I find another pro scout for a good price, I may toss the blade and the lanyard loop and add a saw exchanger. Or perhaps mod in a diesel saw. Depends on what I find for good prices.
Charles.
Post by: gerleatherberman on July 28, 2019, 03:31:39 AM
(http://i.imgur.com/RUQi6xA.jpg)
(http://i.imgur.com/Tf0PZ4F.jpg)
Post by: ChopperCharles on July 28, 2019, 04:36:59 AM
Charles.
Post by: gerleatherberman on July 28, 2019, 04:54:58 AM
I like that extra driver! And the saw is slick too. Too bad you had to sacrifice a flick to make it though. Those aren’t easy to come by.Thanks, Charles! :cheers:
Charles.
The FLiK parts helped repair another FLiK and a FreeHand(FLiK's gigantic bigger brother needed a pliers mount screw). Got three tools fixed up with the one FLiK(it had a bad pliers mechanism and stripped out screw to begin with), so the sacrifice was worth it. :)
I still need to get the FLiK scissors in the 600, but making the pivot bushing(the FLiK outer pivot holes are larger while the FLiK small tools have the standard Gerber pivot size) by hand out of tiny washers is a PITA. :ahhh
Post by: gerleatherberman on July 28, 2019, 06:07:00 AM
I did have to grind 1/8" off of the scissor handle(as well as remove the FLiK scissor thumb pad), so it could be used with the pliers retracted, though I will use them with the handles open for effectiveness.
Here it is. FLiK scissors in an MP600. :)
(http://imgur.com/RI9GmHM.jpg)
(http://imgur.com/AD5LzfZ.jpg)
(http://imgur.com/T4LpXqk.jpg)
(http://imgur.com/GTGdJNL.jpg)
(http://imgur.com/DVAYyaj.jpg)
(http://imgur.com/sZsWFJK.jpg)
(http://imgur.com/iVehNDp.jpg)
Post by: ChopperCharles on July 28, 2019, 06:58:36 AM
On the hunt for a damaged flik now...
Wait. That's an outside opening tool. I wonder.... could it replace the OHO blade, to make a bladeless center drive??
Charles.
Post by: gerleatherberman on July 28, 2019, 08:11:13 AM
The FLiK still uses the saf-t-lock mechanisn on the OHO outboard tools, so it may not work. But, that said, I'm definitely not a master modder, so maybe someone else has some insight on the idea. :)
The FLiK scissors, even without the thumbpad, are notably better than the CD+ scissors. More cutting area and a longer handle. If you could make them outboard on the CD, you could keep the nice thumbpad too. :)
Good luck on the FLiK hunt, Charles!
And don't forget to post a wanted thread if you haven't done so! :cheers:
I can measure the thickness of the sheet I used to make the bushing when you're ready as well. It ended up being perfect with no play in the lockup.
Also, forgot to mention earlier, I ground about 3/32" off of the spine of the scissor frame. No mods were done to the spring though.
Post by: gerleatherberman on July 28, 2019, 08:15:14 AM
Those are the scissors that should be in the CD+. ;)
Once a user can get over using the scissors with the handles open, they'll see how much nicer the cutting action is without the lanyard hole lock release of the CD+ in the way of using the scissors.
The CD sprung pliers would make the handle-open scissor-action even easier.
Post by: Juan el Boricua on July 28, 2019, 11:50:38 PM
Post by: ChopperCharles on July 29, 2019, 01:11:38 AM
Charles.
Post by: gerleatherberman on July 29, 2019, 04:41:56 AM
Nice job/mod gerleatherberman!!! :drool: :like: :gimme:Many thanks, Juan! :cheers:
Actually, with those scissors, the stock file, combo pry tool, and awl, plus a saw blade in place of the OHO knife blade, the center drive would be damn near perfect.:like: :iagree:
Charles.
Post by: Roc on August 05, 2019, 01:42:01 AM
Post by: Roc on August 05, 2019, 03:48:27 AM
Post by: Hevy (CT-782) on August 05, 2019, 03:57:41 AM
I really like Gerbers
Enviado de meu moto g(6) usando o Tapatalk
Post by: JonesE on August 08, 2019, 02:57:13 AM
Is the Gerber forum always this quiet, or is it that my tool is plain Jane?
Hi Roc, Congrats on the new MP600. The Gerber forum could seem quite right now, but there are quite a lot of members that carry and use their MP600s. It could be that there is no Gerber multitools challenge going right now. I know in the past there has been ones for MPs and the Center Drive earlier this year. Post up some pics when you get your MP600 in hand.
JonesE
Post by: Roc on August 08, 2019, 03:25:22 AM
Hi Roc, Congrats on the new MP600. The Gerber forum could seem quite right now, but there are quite a lot of members that carry and use their MP600s. It could be that there is no Gerber multitools challenge going right now. I know in the past there has been ones for MPs and the Center Drive earlier this year. Post up some pics when you get your MP600 in hand.
JonesE
Makes sense. I’ve already been posting in what tool did you carry in general forum. :cheers:
Post by: Juan el Boricua on August 08, 2019, 03:55:37 AM
And this is one of two Basics I have; so, plain jane too!!! :D
Post by: Roc on August 08, 2019, 04:05:14 AM
Alright...I'll start making some noise for our pal Roc! :tu:
And this is one of two Basics I have; so, plain jane too!!! :D
Lovin’ it. Make some noise!
My carry for today...
Post by: Juan el Boricua on August 08, 2019, 04:10:49 AM
Post by: Roc on August 08, 2019, 04:13:19 AM
Really liking that Zebra... :drool:
:cheers: Thanks Juan! Me too! :D
Post by: gerleatherberman on August 08, 2019, 04:43:57 AM
Is the Gerber forum always this quiet, or is it that my tool is plain Jane?It is the Gerber board. Even though some of us carry Gerbers, this site is generally Victorinox and Leatherman dominant. Like JonesE said, it usually gets jumping in the Gerber board with challenges, and then sometimes collection stuff.
Looking forward to seeing your first modern Gerber usage pics! :popcorn:
Hi Roc, Congrats on the new MP600. The Gerber forum could seem quite right now, but there are quite a lot of members that carry and use their MP600s. It could be that there is no Gerber multitools challenge going right now. I know in the past there has been ones for MPs and the Center Drive earlier this year. Post up some pics when you get your MP600 in hand.We do need to schedule an MP600 challenge. :cheers:
JonesE
Post by: JonesE on August 09, 2019, 03:33:51 AM
We do need to schedule an MP600 challenge. :cheers:
Great idea GLBM. :iagree: The rest of this year seems to have already filled up with challenges already. Something for early next year maybe?
JonesE
Post by: JonesE on August 09, 2019, 03:41:17 AM
Lovin’ it. Make some noise!
Here is a pic of my MP600 EOD. Haven’t carried it in a long while.
JonesE
Post by: Roc on August 09, 2019, 04:04:36 AM
Post by: gerleatherberman on August 09, 2019, 05:38:10 AM
Great idea GLBM. :iagree: The rest of this year seems to have already filled up with challenges already. Something for early next year maybe?:cheers:
JonesE
Sounds good. Maybe a new year MP600 extravaganza in January?
Here is a pic of my MP600 EOD. Haven’t carried it in a long while.Very nice! :like:
JonesE
It and the sight tool are my two favorite BO 600s. :)
Post by: JonesE on August 12, 2019, 07:34:18 AM
Sounds good. Maybe a new year MP600 extravaganza in January?
January sounds good GLBM. Thanks :woohoo:
JonesE
Post by: Roc on August 13, 2019, 02:18:37 AM
Post by: Juan el Boricua on August 13, 2019, 05:03:34 AM
Post by: gerleatherberman on August 13, 2019, 07:56:42 AM
Nice kit, Roc! :like:
:iagree:
Solid! :like:
Post by: Roc on August 14, 2019, 02:32:26 AM
If so, I’ll drop out. Don’t think it should go for what it’s up to.
Post by: Juan el Boricua on August 14, 2019, 05:43:56 AM
Post by: Roc on August 15, 2019, 02:44:22 AM
Post by: Juan el Boricua on August 15, 2019, 03:52:13 AM
Edit- Another tidbit of info.: be careful of the position of the indexed washers ( the ones that go between tools to prevent clumping); I tend to push out the female end of the pivot with a piece of wire ( once the bolt's off) so that I can keep everything in order while disassembling and mod/ reassembly. Hope it makes sense, and helps!
Post by: gerleatherberman on August 15, 2019, 04:30:45 AM
My Gerber Black Oxide Duo.Nice setup! :like:
There are out there the loki wrenches (from member lokimobile); I made this from a cheap bit set: a 1cm/3/8" bit which I reprofiled the tip to fit two opposing notches from the pivot bolt (found on the metric and the imperial rulers). Remember to heat the pivot to loosen the thread lock ("Loktite").You do not need a second bit, as the female end of the pivot fits inside notches in the handles and won't turn. I place a drop of blue Locktite on the bolt's threads for reassembly; blue holds fine, and you don't need to heat it up to break it free. Simple and pretty effective. Good luck with your moddin' and hope to see pictures soon!Good idea there, Juan! :iagree:
Post by: Juan el Boricua on August 15, 2019, 04:43:25 AM
:hatsoff:
Post by: Roc on August 15, 2019, 10:02:46 PM
Post by: gerleatherberman on August 15, 2019, 10:21:56 PM
Thanks, gerleatherberman!
:hatsoff:
:cheers:
Thanks Juan! I think I’ll attempt to make my own too. Just won an ST, so I have the philips that I wanted. :woohoo::woohoo:
Congrats! Great version of the 600! :like:
Post by: Juan el Boricua on August 15, 2019, 10:42:44 PM
Post by: Roc on August 15, 2019, 10:47:00 PM
Post by: Roc on August 16, 2019, 02:33:11 AM
Post by: Juan el Boricua on August 16, 2019, 07:36:16 PM
Edit: Forgot picture... :facepalm:
Post by: Roc on August 19, 2019, 02:28:56 AM
Post by: Juan el Boricua on August 19, 2019, 03:08:58 AM
:like:
Post by: Roc on August 19, 2019, 03:12:22 AM
Good fit, with pocket for bit kit, and elastic band for light/marker!! Nice pairing, Roc.
:like:
Thanks Juan! I think I’ll put tape over part of the Velcro, so it will be a bit quieter. :D
Post by: Juan el Boricua on August 19, 2019, 03:20:30 AM
It reminds me of my Maxped single sheath when new; sounded as if my trousers were ripping! :rofl:
Post by: Roc on August 20, 2019, 01:27:21 AM
Post by: Juan el Boricua on August 20, 2019, 01:30:04 AM
:like:
Post by: Roc on August 20, 2019, 01:36:31 AM
Post by: Juan el Boricua on August 20, 2019, 01:59:09 AM
Having said that, until Gerber makes replacement cutters out of tool steel or 154cm SS, my integral cutters will be the best of Gerber's.
Roc, how about exchanging the sight tool for a saw blade exchanger? Or scissors and an awl? Or ...I'll let others chime in now. :whistle:
Post by: Roc on August 20, 2019, 02:07:19 AM
Don't worry much about the cutters, unless you plan to use them as your primary cutters (which I wouldn't recommend), or back ups (which I wouldn't recommend either!); mines have been fine for copper wires (electronics, house wiring, both single and multistranded), and steel wires for up to cloth hanger; for cloth wire, I notch it with the cutters and then use the pliers to "bend-cut it" . Not a single nick or shattered cutter. Mind you that I may use them once or twice weekly. If you're mindful of what they were adapted for, you'll enjoy them for long.Thanks for the feedback on the cutters! I guess I can just switch the plier head out when needed. I only use them for stranded copper, so I think I’ll be safe either way.
Having said that, until Gerber makes replacement cutters out of tool steel or 154cm SS, my integral cutters will be the best of Gerber's.
Roc, how about exchanging the sight tool for a saw blade exchanger? Or scissors and an awl? Or ...I'll let others chime in now. :whistle:
I do like the idea of a saw blade exchanger. I’d use that a lot at work, but an awl and scissors would be used just as much. Time to think.
Post by: Juan el Boricua on August 20, 2019, 02:11:01 AM
Will be waitin' for pictures!!!
:popcorn:
Post by: Roc on August 20, 2019, 02:15:14 AM
https://youtu.be/N5CgqbGw1Sw
Post by: Roc on August 20, 2019, 02:47:19 AM
Post by: Juan el Boricua on August 20, 2019, 03:13:43 AM
Post by: Juan el Boricua on August 23, 2019, 06:36:08 AM
Post by: Roc on August 26, 2019, 10:07:44 PM
Post by: Juan el Boricua on August 26, 2019, 10:14:51 PM
Post by: gerleatherberman on August 27, 2019, 08:33:54 AM
Swapped out the wharn blade for the older version blade. Surprisingly easy to do.One of my favorite upgrades for the MP600! :like:
Post by: Roc on September 01, 2019, 12:01:47 AM
Post by: Juan el Boricua on September 01, 2019, 12:14:03 AM
Have you considered grinding an angle to the tip of one of the small flat driver and make a "mini awl"? That way, you get a "new" tool in the set. :think:
Post by: Roc on September 01, 2019, 12:19:25 AM
Nice job, Roc! :tu:
Have you considered grinding an angle to the tip of one of the small flat driver and make a "mini awl"? That way, you get a "new" tool in the set. :think:
I thought about that Juan, but I use an awl for starting holes for screws in wood. That’s it. The carbon scraper works great for that. It’s something I will consider if a greater need should arise though.
Post by: Juan el Boricua on September 01, 2019, 12:21:04 AM
Post by: Juan el Boricua on September 05, 2019, 03:25:47 AM
Post by: gerleatherberman on September 10, 2019, 05:55:02 AM
Post by: Juan el Boricua on September 10, 2019, 06:06:07 AM
Post by: gerleatherberman on September 10, 2019, 06:09:35 AM
Thank you, Chief. As long as it's a workday, it has to be bladeless. Liking the ability to exchange saw blades! :like::cheers:
Definitely a great feature! :)
Post by: Juan el Boricua on September 11, 2019, 05:08:59 AM
Post by: Rapidray on September 11, 2019, 05:23:00 AM
Family portrait.Nice collection there! :like: :cheers:
Post by: Juan el Boricua on September 11, 2019, 05:26:16 AM
Post by: gerleatherberman on September 11, 2019, 02:14:52 PM
Family portrait.Great Gerberouping, Juan! :like:
Post by: Juan el Boricua on September 11, 2019, 04:11:37 PM
:cheers:
Post by: Juan el Boricua on September 15, 2019, 04:35:46 AM
Yes, I like having a lanyard ring; I'll use it every time I go up on the roof or a ladder, or where it might become hazardous if it were to fall.
Having said that, I DESPISE having rings taking up valuable tool space (here's to Mr Pinchy, and any MP600 for that matter!), so I took upon copying the LTG's Wave et. al./Surge series alternative: an inconspicuous, unobstrussive, and elegant way to incorporate one.
My ring rides over the captive end of the female pivot, between handle and can/bottle opener.
Hope you people like it!
Post by: ChopperCharles on September 28, 2019, 12:21:15 AM
Charles.
Post by: gerleatherberman on September 28, 2019, 05:07:29 AM
How rare are the mp600s with awls? I know the fisherman is a hard find, but occasionally I’ve seen a couple of regular mp600s without the small driver, with an awl in its place. How rare are these in silver? Or black oxide?Not all that rare. It is the Sportsman version of the 600. Uncommon, but not rare. The Sportsman is often overlooked by collectors though.
Charles.
Post by: Juan el Boricua on October 13, 2019, 04:21:49 PM
Today's carry: Basic MP with adapted jigsaw blade, Maglite LED Solitaire, "the other company's" bit driver, and mini Sharpie; all in a Maxped Single Sheath with DIY tool loops. :D
Happy Sunday to everyone! :salute:
Post by: Rapidray on October 13, 2019, 04:27:21 PM
A bump for one of my favorite mt's!Nice set up :like: :cheers:
Today's carry: Basic MP with adapted jigsaw blade, Maglite LED Solitaire, "the other company's" bit driver, and mini Sharpie; all in a Maxped Single Sheath with DIY tool loops. :D
Happy Sunday to everyone! :salute:
Post by: Juan el Boricua on October 13, 2019, 05:01:25 PM
:hatsoff: :tu
Post by: gerleatherberman on October 14, 2019, 02:46:53 AM
A bump for one of my favorite mt's!:like:
Today's carry: Basic MP with adapted jigsaw blade, Maglite LED Solitaire, "the other company's" bit driver, and mini Sharpie; all in a Maxped Single Sheath with DIY tool loops. :D
Happy Sunday to everyone! :salute:
Great carry, Juan!
Post by: Juan el Boricua on October 15, 2019, 01:08:33 AM
Post by: Roc on October 23, 2019, 10:56:19 PM
Post by: Juan el Boricua on October 23, 2019, 11:06:45 PM
Post by: Roc on October 23, 2019, 11:12:04 PM
Post by: gerleatherberman on October 24, 2019, 12:47:13 AM
Stayin aliveSolid carry, Roc! :like:
Post by: Roc on October 24, 2019, 12:53:16 AM
Post by: Juan el Boricua on October 24, 2019, 01:04:30 AM
Thanks GLB! Just helping to keep the thread going. Wish more found the 600 series as beautiful and useful. It gets so much flack everywhere.
Yeah; what he said!!! :iagree: :like:
Post by: Rapidray on October 24, 2019, 03:53:04 AM
Stayin alive
Love the Bee Gee’s :cheers:
Nice MT by the way
Post by: gerleatherberman on October 24, 2019, 07:04:30 PM
Thanks GLB! Just helping to keep the thread going. Wish more found the 600 series as beautiful and useful. It gets so much flack everywhere.:cheers:
Same with the Gerber OG MP "Pinchy". They are great tools once a user has become familiar with how to use them. :)
Post by: Roc on October 24, 2019, 09:53:10 PM
Post by: Rapidray on October 25, 2019, 12:53:33 AM
Post by: Juan el Boricua on October 27, 2019, 07:34:28 PM
Thanks for watching! :tu:
Had to edit to include picture ... :facepalm: :facepalm: :facepalm:
Post by: Rapidray on October 27, 2019, 09:28:26 PM
For today, my first Gerber mt.: Basic MP600. It's complemented by a removable jigsaw metal blade, generic bit kit, and homemade awl bit.:like: :cheers:
Thanks for watching! :tu:
Had to edit to include picture ... :facepalm: :facepalm: :facepalm:
Post by: Juan el Boricua on October 28, 2019, 12:41:50 AM
Post by: gerleatherberman on October 28, 2019, 01:31:52 AM
Post by: Juan el Boricua on October 28, 2019, 02:04:14 AM
Oh my, that "c" word is coming to me from everywhere ...! :facepalm:
Must resist!!! :rofl: :rofl: :rofl:
Post by: Juan el Boricua on November 01, 2019, 08:04:38 PM
😁
Post by: Roc on November 02, 2019, 01:05:09 AM
Just for bumps ... beauty shot of bladeless MP!
😁
That’s a great pic Juan! :like:
Post by: Juan el Boricua on November 02, 2019, 02:14:36 AM
Post by: Rapidray on November 02, 2019, 04:10:22 AM
Just for bumps ... beauty shot of bladeless MP!Nice photo :cheers:
😁
Post by: Juan el Boricua on November 02, 2019, 04:53:03 AM
Post by: Juan el Boricua on November 22, 2019, 06:31:23 AM
Post by: Rapidray on November 22, 2019, 02:20:12 PM
Well, it has been close to 6 months now since my ownership to this great tool. Sadly, and as almost everyone knows, it is now just time to wait "for it to happen" :popcorn:; one of my tungsten cutters is nicked from hitting the other while I was pulling tight a wire twist and, pliers slipped and closed upon each other. Although still functional, I'd guess it is now a thing of "when" than rather "if" they'll explode! Just ordered replacements (dang they're gettin' expensive! :facepalm:). Ranting aside, here's the "BOD" (Black Oxide Duo) with a new "partner" just in :mail::Oh no :facepalm:
Hope the parts arrive before anything explode’s :cheers:
Post by: Juan el Boricua on November 22, 2019, 03:00:21 PM
Post by: Hevy (CT-782) on November 22, 2019, 03:07:09 PM
Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on November 22, 2019, 03:13:09 PM
:cheers:
Post by: gerleatherberman on November 22, 2019, 03:41:38 PM
Indeed those inserts are ridiculously priced. I wish they would make some 154CM steel replacement cutters, as they'd be cheaper to make and not be prone to breakage so much.
Post by: Juan el Boricua on November 22, 2019, 04:06:53 PM
Until then, there integrated cutters are the best when sharpened.
Anyhow, thanks! :hatsoff:
Post by: mpgt on November 22, 2019, 04:35:29 PM
Well, it has been close to 6 months now since my ownership to this great tool. Sadly, and as almost everyone knows, it is now just time to wait "for it to happen" :popcorn:; one of my tungsten cutters is nicked from hitting the other while I was pulling tight a wire twist and, pliers slipped and closed upon each other. Although still functional, I'd guess it is now a thing of "when" than rather "if" they'll explode! Just ordered replacements (dang they're gettin' expensive! :facepalm:). Ranting aside, here's the "BOD" (Black Oxide Duo) with a new "partner" just in :mail::
Each blade has 3 sides right? So you can rotate it until all 3 sides are damaged. Seems pretty convenient to me.
Post by: mpgt on November 22, 2019, 04:36:36 PM
Post by: Juan el Boricua on November 22, 2019, 05:02:57 PM
Each blade has 3 sides right? So you can rotate it until all 3 sides are damaged. Seems pretty convenient to me.
Indeed, but, once tungsten carbide is stressed (and the nick is at the bolt grip end; and the brittleness of the metal) it's just a matter of waiting. But thanks anyway! :tu:
Post by: mpgt on November 22, 2019, 05:13:24 PM
Indeed, but, once tungsten carbide is stressed (and the nick is at the bolt grip end; and the brittleness of the metal) it's just a matter of waiting. But thanks anyway! :tu:
Got it. Luckily I haven't had that happen yet.
Post by: Juan el Boricua on November 22, 2019, 05:18:29 PM
Is the back part the one in kydex?
:tu: :cheers:
Post by: mpgt on November 22, 2019, 05:42:16 PM
Post by: Juan el Boricua on November 22, 2019, 05:48:47 PM
And thanks for the details!
Post by: mpgt on November 22, 2019, 05:57:37 PM
Post by: Juan el Boricua on November 22, 2019, 06:14:44 PM
Thanks in advance, mpgt.
Post by: mpgt on November 22, 2019, 06:22:39 PM
Post by: Juan el Boricua on November 22, 2019, 06:26:49 PM
Post by: Rapidray on November 23, 2019, 02:37:53 AM
Here's mine. I carried it daily for years. My faithful fishing companion!!Ok, that sheath just rocks! :like:
That is one I would pick up in the wild had I not even known about it! It just yells at me :cheers:
Post by: mpgt on November 23, 2019, 04:16:22 AM
Sorry to keep asking but, does it has a belt clip or loop; can it be scout/ horizontal carry? Of it can be scout carry, it IS a perfect sheath! :drool:Here’s a pic of the back.
Thanks in advance, mpgt.
Post by: Juan el Boricua on November 23, 2019, 04:46:33 AM
Post by: mpgt on November 23, 2019, 04:55:22 AM
Post by: Mechanickal on November 30, 2019, 01:02:06 PM
(https://uploads.tapatalk-cdn.com/20191130/880ef6022241ccee82145044a3fb2e19.jpg)
MP600 Blunt Nose, no carbide inserts, plastic tool lock tabs, metal slide buttons.
Anyone know when they were made in this setup? Early 2000's?
Post by: Juan el Boricua on November 30, 2019, 01:49:08 PM
You are about right on the dating, since my(very little) understanding puts the tungsten carbide cutters in the MP's around 2003-4.
Does yours have "Fiskars" branding on the scissors; is it a clip point plain edge knife?
Again, congratulations on your find!
:like:
Post by: Mechanickal on November 30, 2019, 02:39:26 PM
And I wouldn't call the straight blade a true clip point...
(https://uploads.tapatalk-cdn.com/20191130/c972386cf6f98f6aa30ad96f259db64b.jpg)
The tool does look mostly unused.
The Philips driver shows some signs of use and the plain edge blade was rolled and showed a nick, but that's already solved :D
Post by: Juan el Boricua on November 30, 2019, 02:49:43 PM
:like:
Post by: Juan el Boricua on November 30, 2019, 03:03:14 PM
I'm wondering if I can retrofit such a blade for the wharncliffe in mine ... :think:
Post by: Rapidray on November 30, 2019, 03:30:55 PM
I'm finally in again!Nice blunt nose! :cheers:
(https://uploads.tapatalk-cdn.com/20191130/880ef6022241ccee82145044a3fb2e19.jpg)
MP600 Blunt Nose, no carbide inserts, plastic tool lock tabs, metal slide buttons.
Anyone know when they were made in this setup? Early 2000's?
Post by: Rapidray on November 30, 2019, 03:32:12 PM
Nope, no scissors at all :DNice :like:
And I wouldn't call the straight blade a true clip point...
(https://uploads.tapatalk-cdn.com/20191130/c972386cf6f98f6aa30ad96f259db64b.jpg)
The tool does look mostly unused.
The Philips driver shows some signs of use and the plain edge blade was rolled and showed a nick, but that's already solved :D
Post by: Juan el Boricua on December 02, 2019, 09:17:52 PM
BTW, any ideas as of why it is of the "newer-logo" but has no date stamp etched? Could it be that's a NOS from the early-new-logo At first I thought of being a CF but, why copy the crappy cutters!? :rofl:
Compared to the others, quality and stamping is spot on; no play between pliers, or tools, sharp blades, same anti clump spacers, same fonts used. Just wondering. :think:
Post by: ChopperCharles on December 02, 2019, 09:34:12 PM
So... do any modders want a DET plier for a project?
Charles.
Post by: Juan el Boricua on December 02, 2019, 09:39:47 PM
:tu:
Post by: ChopperCharles on December 03, 2019, 10:13:11 PM
If you were to dispose of the scissors, let me know as I'd be interested.
:tu:
Sorry, I just used the scissors to complete a Pro-Scout lookalike. Assembled all the parts from misc tools I acquired for other purposes. Has a full compliment of the 3 flat drivers (including the large flat driver, so one more than the Pro-Scout), file, and scissors on one side. On the other, it has a combo blade, can opener, phillips driver, and saw blade.
The remgrit holder went back into my first Gerber multitool I ever owned, my original Pro-Scout... which I had stolen the remgrit holder from to put in my Center Drive. (I also converted this one to bladeless and added a large flat driver).
The rest of the tools I either threw out or put in my bag o spares.
Charles.
Post by: Juan el Boricua on December 03, 2019, 11:02:17 PM
Post by: rdub934 on December 04, 2019, 08:56:29 PM
Post by: Juan el Boricua on December 04, 2019, 11:05:25 PM
Congrats on a wise choice. :tu:
:cheers:
Post by: ChopperCharles on December 06, 2019, 02:56:32 AM
It's alright. Although I'd like to see pictures of your "Master Scout"!! :multi:
Here you go!
Charles.
Post by: Sam Lim on December 06, 2019, 06:22:54 AM
Post by: Sam Lim on December 06, 2019, 12:10:17 PM
Post by: Juan el Boricua on December 06, 2019, 05:13:22 PM
:like:
Now THAT'S a needle nose! Good one Sam.
:tu:
Post by: Rapidray on December 06, 2019, 06:23:38 PM
Post by: rdub934 on December 07, 2019, 01:15:02 PM
We'll see what happens. I'll see about swapping the heads when I get it back.
Post by: Juan el Boricua on December 07, 2019, 03:28:51 PM
We'll be waitin' ...
:popcorn:
Post by: Rapidray on December 09, 2019, 03:32:51 PM
Post by: Juan el Boricua on December 09, 2019, 03:59:47 PM
:tu:
Post by: Rapidray on December 09, 2019, 04:10:26 PM
Post by: Juan el Boricua on December 11, 2019, 04:09:33 AM
Post by: Rapidray on December 11, 2019, 04:18:22 AM
Post by: Rapidray on December 12, 2019, 03:51:00 PM
Post by: Juan el Boricua on December 12, 2019, 06:45:54 PM
Post by: Rapidray on December 13, 2019, 01:35:30 AM
He set’s the beat! :cheers:
Post by: David on December 13, 2019, 02:26:22 AM
Today’s carry
:tu: :like:
Post by: Rapidray on December 13, 2019, 03:50:33 AM
Post by: gerleatherberman on December 13, 2019, 08:11:48 PM
Thanks for the info, Juan! :salute:
Post by: Max Stone on January 08, 2020, 11:25:44 PM
So I am pleased to add my name to this club, with the acquisition of an MP600 Blunt nose. :salute:
This model is an early version (circa 1998-2003), as it still carries the Simonds file, has the drop-point PE blade and pre-tungsten carbide cutters. From what I read, the cutters are not popular, so I'm happy to skip this feature. And I'm not a fan of the newer wharncliffe blade. So a few observations...
- It's longer than Mr. Pincy, allowing the Phillips and flat drivers to be a more reasonable length, but still a little short
- Handles no longer symmetrical stampings as one handles fits inside other where they meet at the plier's pivot
- Additional handle length allows increased gripping pressure on pliers
- All tools now lock with a sliding system which is possibly better than Leatherman's rocker-type (less chance of accidental unlock)
- Inside space better utilized with folding tools, adding dedicated small flat, but dropping the flat tip on the can opener
- Blunt nose does not fully retract, about 3mm left exposed. But slide groove could be extended 3mm without pliers snagging on tools
- Handles wider apart to reduce palm pinching, but makes tool larger and creates more obstruction when using the blades
- Plier head bigger and wider, so will be stronger, and wire cutters longer. Crimper added to area behind pliers
- Slide mechanism simplified with circlip retainer replacing button-head screws. Tapping no longer needed in pliers and adjustments-free
- Neater proprietary (?) flat-top button-head screws replace basic nut/screw tool pivot
- Ruler markings extended from 7 to 8cm (inches unchanged)
It's very clear that Gerber made a real effort to improve the design, and in the hand, the original Multi-Plier almost feels like a factory prototype when compared to the MP600. Both are very capable tools that I'm happy to include in my rotation schedule. But while the original has a wonderful 'vintage' character, the MP600 is better. That in continues in production almost unchanged for 20 years is a validation of this excellent design. :cheers:
Post by: JBW1 on January 08, 2020, 11:46:27 PM
Well, I found something quite-surprising-to-me today; as I cleansed my blunt nose (the one from THIS post: https://forum.multitool.org/index.php/topic,52129.msg2052377.html#msg2052377), I found out that Gerber is now stamping the production date inside one of the handles, specifically towards the tools' end at the can opener's side! I find this a good production improvement, as the etched date stamp on my SS NN is slowly fading and is almost gone (even though it is a 2017 model). I'm sure that this will make model dating better in the future. Just wanted to share that tidbit of info. with you all. :salute:Tidbits are worth quite a bit, thank you
Post by: Barry Rowland on January 08, 2020, 11:51:57 PM
Post by: JBW1 on January 08, 2020, 11:53:19 PM
Post by: Rapidray on January 09, 2020, 01:19:23 AM
After my very favorable impression of the original 'Mr. Pinchy' Multi-PlierNice photos on the two! :cheers:
I decided I must get an MP600 to explore this Gerber product a little more, and to get an objective view of the differences.
So I am pleased to add my name to this club, with the acquisition of an MP600 Blunt nose. :salute:
This model is an early version (circa 1998-2003), as it still carries the Simonds file, has the drop-point PE blade and pre-tungsten carbide cutters. From what I read, the cutters are not popular, so I'm happy to skip this feature. And I'm not a fan of the newer wharncliffe blade. So a few observations...
Post by: Rapidray on January 09, 2020, 01:20:01 AM
Is there a by chance a Mr. Pinchy MAIMING thread? Pretty sure many folks have pics of the “love bites”... ummm in the dead of night... and good stories to go along with them : ;)Nice :like: :cheers:
Post by: JBW1 on January 09, 2020, 01:30:49 AM
Nice :like: :cheers::D :drink: :P
Post by: Rapidray on January 09, 2020, 01:33:14 AM
Post by: JBW1 on January 09, 2020, 01:35:31 AM
Think I will have my 600 pull a little backup duty tomorrow :cheers: :drink:
Don’t forget a suture.
Jk
Love the flikinessssss
Post by: SteveC on January 09, 2020, 01:41:27 AM
https://forum.multitool.org/index.php/topic,71769.msg1514766.html#msg1514766
(https://live.staticflickr.com/4302/35958348495_dc5f63fc76_b.jpg)
Post by: JBW1 on January 09, 2020, 01:44:18 AM
My solution to lack of an awl :tu:NICE!!
https://forum.multitool.org/index.php/topic,71769.msg1514766.html#msg1514766
(https://live.staticflickr.com/4302/35958348495_dc5f63fc76_b.jpg)
Post by: David on January 09, 2020, 02:28:28 AM
My solution to lack of an awl :tu:
https://forum.multitool.org/index.php/topic,71769.msg1514766.html#msg1514766
(https://live.staticflickr.com/4302/35958348495_dc5f63fc76_b.jpg)
Oh I like that awl. :tu: That makes me awl happy! :D
Post by: Rapidray on January 09, 2020, 05:35:00 AM
My solution to lack of an awl :tu:Wow...that is a cool mod there Steve! :like: :cheers:
https://forum.multitool.org/index.php/topic,71769.msg1514766.html#msg1514766
(https://live.staticflickr.com/4302/35958348495_dc5f63fc76_b.jpg)
Post by: Ivo on January 09, 2020, 01:04:08 PM
My solution to lack of an awl :tu:Good solution Steve :like: :tu: :cheers:
https://forum.multitool.org/index.php/topic,71769.msg1514766.html#msg1514766
(https://live.staticflickr.com/4302/35958348495_dc5f63fc76_b.jpg)
Post by: Ivo on January 09, 2020, 01:13:57 PM
Post by: Barry Rowland on January 09, 2020, 01:51:43 PM
Post by: Ivo on January 09, 2020, 02:46:17 PM
Post by: Rapidray on January 09, 2020, 03:43:16 PM
8 different MP600 from my GERBER collection. :hatsoff:Very nice collection there! :like: :cheers:
Post by: Rapidray on January 09, 2020, 03:44:25 PM
Post by: Ivo on January 09, 2020, 04:43:16 PM
Post by: David on January 09, 2020, 09:17:56 PM
Post by: Juan el Boricua on January 09, 2020, 10:13:38 PM
Definitely I prefer the integrated cutters, but replaceables are ok for most uses.
:tu: :cheers:
Post by: Rapidray on January 09, 2020, 11:58:42 PM
My favorite MP600.Nice 600 :like: :cheers:
Post by: SteveC on January 10, 2020, 08:09:46 PM
Post by: Mechanickal on January 10, 2020, 09:17:24 PM
I LOVE your shooting style :dd:
Post by: SteveC on January 10, 2020, 10:30:41 PM
Post by: Rapidray on January 11, 2020, 01:02:47 AM
(https://i.imgur.com/IQipHtzh.jpg)Nice 600 :like: :cheers:
Post by: Screwdriver on January 23, 2020, 03:22:40 PM
Well, I found something quite-surprising-to-me today; as I cleansed my blunt nose (the one from THIS post: https://forum.multitool.org/index.php/topic,52129.msg2052377.html#msg2052377), I found out that Gerber is now stamping the production date inside one of the handles, specifically towards the tools' end at the can opener's side! I find this a good production improvement, as the etched date stamp on my SS NN is slowly fading and is almost gone (even though it is a 2017 model). I'm sure that this will make model dating better in the future. Just wanted to share that tidbit of info. with you all. :salute:
I have a bladeless BO with the same date code as yours.
Post by: Juan el Boricua on January 23, 2020, 04:54:41 PM
Post by: ElevenBlade on January 25, 2020, 11:58:15 PM
My solution to lack of an awl :tu:
https://forum.multitool.org/index.php/topic,71769.msg1514766.html#msg1514766
(https://live.staticflickr.com/4302/35958348495_dc5f63fc76_b.jpg)
If I could mod the file into something... :think:
Post by: SteveC on February 01, 2020, 05:58:02 AM
Post by: Rapidray on February 01, 2020, 08:56:36 AM
Post by: Max Stone on February 01, 2020, 09:20:01 AM
Post by: Juan el Boricua on February 07, 2020, 10:32:38 PM
Post by: Max Stone on February 07, 2020, 10:38:34 PM
And of course an excellent MP :salute:
Post by: Juan el Boricua on February 07, 2020, 10:40:46 PM
:hatsoff: :cheers:
Post by: Rapidray on February 07, 2020, 11:22:11 PM
A bump to one of my favorite sub topics ( and tool!); here's today's carry:Great carry set up... :like: :cheers:
Post by: Hevy (CT-782) on February 07, 2020, 11:49:27 PM
Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on February 08, 2020, 12:00:04 AM
:hatsoff: :cheers:
Post by: ChopperCharles on February 23, 2020, 04:55:45 PM
Charles.
Post by: Max Stone on February 24, 2020, 03:54:31 PM
Post by: ElevenBlade on February 24, 2020, 06:11:16 PM
Real multitool use is when you improvise to get the job done, and the multitool does the job without skipping a beat! :like:
:iagree:
It's more about a versatile tool than a dedicated one.
Post by: Juan el Boricua on March 01, 2020, 07:07:59 PM
Today's carry. Still in awe as to how a 20+ years mt design can be so versatile, rugged, functional, and cheap! :like:
Post by: rdub934 on March 03, 2020, 04:10:27 PM
Possible changes going forward - I don't love the small driver so I might look into modding it into an awl/random pokey implement or just secure an awl from a compatible donor. Also, I don't really ever use saws on multitools, so I may look into replacing it with something else. Any suggestions?
Post by: Juan el Boricua on March 03, 2020, 04:23:03 PM
May I suggest downloading a free app such as Photo Resizer?; it's pretty easy to use!
Good luck on your modd'ing! :tu:
Post by: Max Stone on March 03, 2020, 09:47:33 PM
They’re too rare to find in my country to cannibalize, and ave shipping costs of $30-40 make Bay importation impractical. Makes my collection of three all the more special. :cheers:
Post by: rdub934 on March 09, 2020, 05:55:28 PM
Post by: Juan el Boricua on March 10, 2020, 12:29:29 AM
:like: :tu::cheers:
Never mind; just reread this post: https://forum.multitool.org/index.php/topic,52129.msg2095831.html#msg2095831
:facepalm: :dunno:
OT- Please excuse me if I'm out of place but, are you planning on doing something with the "released" pliers head?
Post by: rdub934 on March 10, 2020, 12:23:21 PM
Rdub934, that's one wonderfully, tasteful mod you've got there!!! Loving that you were able to usean early blunt nose (integrated cutters) pliers head and, are the scissors and saw from a Diesel!?!I'd guess that you have now a very functional and useful tool. Kudos to you, Sir!
:like: :tu::cheers:
Never mind; just reread this post: https://forum.multitool.org/index.php/topic,52129.msg2095831.html#msg2095831
:facepalm: :dunno:
OT- Please excuse me if I'm out of place but, are you planning on doing something with the "released" pliers head?
I've got them in the other chassis. Think I will rebuild that one and give to one of my kids.
Post by: Juan el Boricua on March 10, 2020, 03:08:49 PM
Post by: rockysan on March 10, 2020, 11:30:33 PM
Post by: Juan el Boricua on March 10, 2020, 11:56:18 PM
:tu: :like:
Post by: rockysan on March 10, 2020, 11:58:24 PM
Nice combo rockysan!Thank you. The only time I feel I wish I was still working is so I can carry all the cool stuff.
:tu: :like:
Post by: Juan el Boricua on March 11, 2020, 12:23:51 AM
Post by: rockysan on March 11, 2020, 12:57:31 AM
Well, you can still carry the neat stuff; there will always be "someone in need", or "chores" around the house like, taking a fan apart or changing a wall switch plate ( just to use the tools)!!! :whistle: :rofl: :rofl: :rofl:There's always that. :cheers: Can I also wear my hard hat and safety vest? On second thought, that would probably scare the heck out of my wife.
Post by: Juan el Boricua on March 11, 2020, 02:27:39 AM
:tu:
Post by: Juan el Boricua on March 15, 2020, 05:10:57 PM
Post by: SteveC on March 15, 2020, 05:53:15 PM
Post by: Juan el Boricua on March 22, 2020, 03:12:45 PM
For today, it's my SS NN MP600 and its kit, still using my replacement C-clip from this post: https://forum.multitool.org/index.php/topic,84221.0.html
So far so good ... :whistle:
Post by: Max Stone on March 22, 2020, 10:34:29 PM
Post by: Juan el Boricua on March 23, 2020, 12:08:46 AM
Stay safe. :tu:
Post by: Juan el Boricua on March 26, 2020, 10:44:02 PM
Post by: Max Stone on March 26, 2020, 10:49:29 PM
Post by: Dunc on March 27, 2020, 07:52:18 AM
Well, today I was able to release from its duty my homemade C-clip; the replacement just arrived, had its belly polished and, had occupied its rightful place. My OCD can now be at ease! :rofl:
So you polished the bottom of the clip to make it slide better ?
Post by: Mechanickal on March 27, 2020, 01:05:40 PM
(https://i.imgur.com/sPAfeLL.jpg)
Post by: Juan el Boricua on March 27, 2020, 04:54:18 PM
So you polished the bottom of the clip to make it slide better ?
Yes, my friend. Stay safe! :cheers:
Nice kit there, Mechanikal! :tu:
Post by: Dunc on March 27, 2020, 05:03:36 PM
Post by: Juan el Boricua on March 27, 2020, 05:06:33 PM
:salute:
Post by: Mechanickal on March 27, 2020, 06:04:24 PM
Post by: MTSebastian on April 10, 2020, 11:33:24 AM
I ask for admission to the MP600 owners' club
I currently have 3. The tool with the selfmade clip is my favorite. However, I don't like the shape of the blades. So I exchanged the older model.
I also filed jigsaw blades myself and built a bit holder
Stay safe folks (https://uploads.tapatalk-cdn.com/20200410/ed3ee8995963e4ca34c64f1b1737595f.jpg)(https://uploads.tapatalk-cdn.com/20200410/baa9b20c3ca3ff0be54756c877d33ca7.jpg)(https://uploads.tapatalk-cdn.com/20200410/dd64971c57bb135b08d566d796c1ff00.jpg)(https://uploads.tapatalk-cdn.com/20200410/29af00279d2765cfc4e5d401977d81f9.jpg)(https://uploads.tapatalk-cdn.com/20200410/b7fcc00d3671b1967f1f47322b8f92ef.jpg)(https://uploads.tapatalk-cdn.com/20200410/af22ee576fcbec1fa8a2e15148ffcf13.jpg)(https://uploads.tapatalk-cdn.com/20200410/da331a74f578569a152b4e49755853e5.jpg)
Gesendet von meinem SM-A600FN mit Tapatalk
Post by: Juan el Boricua on April 10, 2020, 01:52:58 PM
Kudos on your clip and bit holder, as I'm sure they make the tool more functional for you. :tu:
Edit- Oh, and welcome to The Club! :multi:
Post by: Hevy (CT-782) on April 10, 2020, 03:45:19 PM
Very nice MP600 you have! I'm a fan of US1. Real nice small knife.
Enviado de meu moto g(6) usando o Tapatalk
Post by: pa_strunk on April 10, 2020, 06:35:13 PM
Post by: MTSebastian on April 10, 2020, 09:58:55 PM
Now I came across the MP600 and was immediately fired up.
It is really a very solid tool with a lot of potential!
Gesendet von meinem SM-A600FN mit Tapatalk
Post by: Max Stone on April 10, 2020, 11:45:19 PM
Hello everybodyWelcome MTSebastian to :MTO:
I ask for admission to the MP600 owners' club
The tool with the selfmade clip is my favorite. However, I don't like the shape of the blades. So I exchanged the older model.
I also filed jigsaw blades myself and built a bit holder
Stay safe folks (https://uploads.tapatalk-cdn.com/20200410/ed3ee8995963e4ca34c64f1b1737595f.jpg)(https://uploads.tapatalk-cdn.com/20200410/baa9b20c3ca3ff0be54756c877d33ca7.jpg)(https://uploads.tapatalk-cdn.com/20200410/dd64971c57bb135b08d566d796c1ff00.jpg)(https://uploads.tapatalk-cdn.com/20200410/29af00279d2765cfc4e5d401977d81f9.jpg)(https://uploads.tapatalk-cdn.com/20200410/b7fcc00d3671b1967f1f47322b8f92ef.jpg)(https://uploads.tapatalk-cdn.com/20200410/af22ee576fcbec1fa8a2e15148ffcf13.jpg)(https://uploads.tapatalk-cdn.com/20200410/da331a74f578569a152b4e49755853e5.jpg)
Gesendet von meinem SM-A600FN mit Tapatalk
And very nice setup you have. :like: I also use the same Lansky to touch up my edges. A very good little sharpener.
Post by: Juan el Boricua on April 29, 2020, 05:56:38 PM
Post by: Mcfal12 on April 29, 2020, 10:20:52 PM
Very nice Juan!
Post by: Juan el Boricua on April 29, 2020, 10:22:38 PM
Post by: Max Stone on April 29, 2020, 11:14:14 PM
Post by: Juan el Boricua on April 29, 2020, 11:23:56 PM
Post by: MTSebastian on April 30, 2020, 08:55:26 PM
Good day to everyone at MT.O, and your family; hope all are safe and sound.Hey Juan, can you tell me more about your Accessoires? I'm interested in your jigsaw blade. How do you make them fit?
For today, it's my SS NN MP600 and its kit, still using my replacement C-clip from this post: https://forum.multitool.org/index.php/topic,84221.0.html
So far so good ... :whistle:
Greetings, Seb
Gesendet von meinem SM-A600FN mit Tapatalk
Post by: Juan el Boricua on April 30, 2020, 09:12:34 PM
The "awl bit", was made following a post from here. At the moment, I'm busy but later on I'll look for the link ( it's something like "awl bit for wave/charge"). Hope this helps; enjoy! :tu:
Post by: Juan el Boricua on April 30, 2020, 09:53:57 PM
https://forum.multitool.org/index.php/topic,1111.msg12587.html#msg12587
Have fun! :tu:
Post by: Juan el Boricua on April 30, 2020, 10:12:26 PM
If you're talking about the jigsaw blades from the SS Mp's kit, those are t shanked blades. I ground the nubs off, measure carefully for shortening it and marking where it will ride (another alternative would be to remove one of the tools and trace shape); using a 1/4" cylindrical grinding stone (again on the Dremel) I ground out "the hook". This is so that it fits over the female pivot post, between handle and can opener. Mind you, not all blades have the neccessary width and, will not fully lock ( it will not close on you during use because it rides against the chassis/handle like a regular tool and there is some resistance if you try to fold it in without operating the sliding lock). If you have any other questions or inquiries let me know. Hope that this now helps! :multi:
Post by: MTSebastian on April 30, 2020, 10:30:02 PM
Looking back, sorry that maybe I misunderstood you! :facepalm:Hey, thanks for your answers! Your knife mod in a bladeless is cool! I spontaneously come up with an idea. You could make a fork and a spoon to fit into the tool holder
If you're talking about the jigsaw blades from the SS Mp's kit, those are t shanked blades. I ground the nubs off, measure carefully for shortening it and marking where it will ride (another alternative would be to remove one of the tools and trace shape); using a 1/4" cylindrical grinding stone (again on the Dremel) I ground out "the hook". This is so that it fits over the female pivot post, between handle and can opener. Mind you, not all blades have the neccessary width and, will not fully lock ( it will not close on you during use because it rides against the chassis/handle like a regular tool and there is some resistance if you try to fold it in without operating the sliding lock). If you have any other questions or inquiries let me know. Hope that this now helps! :multi:
that would be perfect for camping! That with the hook is a good idea! I only get the T shaft blades here in Germany. That's why I filed them thinner and thinner so that they fit
I will put the Awl bit on the ToDo list.
Gesendet von meinem SM-A600FN mit Tapatalk
Post by: Juan el Boricua on April 30, 2020, 10:38:25 PM
Post by: ChopperCharles on May 05, 2020, 05:49:56 AM
The plier heads have been ground so they fit completely in the handles. I ground a scraper into the end of the file. I drilled and tapped holes for a pocket clip. The latest mod was expensive - I searched high and low for an mp600 with an awl. Found one and swapped it in. Now it’s the perfect tool for me.
Charles.
Post by: Max Stone on May 05, 2020, 07:58:18 AM
I was looking at the clearance behind the pliers when closed, and I recon that there’s a bit of space left to have the pliers slide in a little deeper. I may look at extending the slide slots to see...
Post by: ChopperCharles on May 05, 2020, 05:01:07 PM
Charles.
Post by: Hevy (CT-782) on May 05, 2020, 05:15:31 PM
Great tool
Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on May 05, 2020, 06:29:26 PM
I did that too. :t[/s]u:Not this...
[/s]
Charles.
Nice and clever mod, thanks!
Post by: Juan el Boricua on May 05, 2020, 06:32:11 PM
I did that too. Just a quick hit with a dremel and I got an extra 2mm of space to slide them in further.
Charles.
...this!
Post by: Juan el Boricua on May 10, 2020, 04:49:13 PM
Happy Sunday/Mother's Day! :tu: :cheers:
Post by: Hevy (CT-782) on May 11, 2020, 08:16:55 PM
And beautifull flowers
Enviado de meu moto g(6) usando o Tapatalk
Post by: Max Stone on May 11, 2020, 10:41:41 PM
I did that too. Just a quick hit with a dremel and I got an extra 2mm of space to slide them in further.I measured and cut the slots back 3mm with my Dremel. The blunt nose MP600 pliers now retract fully. Much better. :cheers:
Charles.
Post by: Juan el Boricua on May 12, 2020, 03:34:12 PM
Post by: Max Stone on May 12, 2020, 04:47:46 PM
Now they match... :cheers:
Post by: Juan el Boricua on May 12, 2020, 05:01:01 PM
:like: :tu:
Post by: MTSebastian on May 12, 2020, 08:52:48 PM
Gesendet von meinem SM-A600FN mit Tapatalk
Post by: Max Stone on May 12, 2020, 10:34:01 PM
Post by: Juan el Boricua on May 12, 2020, 11:23:23 PM
:woohoo:
Post by: Max Stone on May 13, 2020, 10:48:51 AM
Post by: Juan el Boricua on May 13, 2020, 12:30:39 PM
:hatsoff: :cheers:
Post by: bobbaero on May 15, 2020, 04:58:51 PM
Keeping up with the "boredom binge", I now have a plain edge blade on my Bladeless; following the results from my serrated edge venture, I bought a Dollar Store paring knife to make a pseudo spear point knife blade ( the spine has no grinding to the point, it merely mimics the curvature of the belly) and, here's the result!Nice set up Juan.
:woohoo:
keep on hackingSent from my iPhone using Tapatalk
Post by: Juan el Boricua on May 15, 2020, 08:24:41 PM
:hatsoff: :cheers:
Post by: Happy Gilmore on May 17, 2020, 12:13:40 AM
Keeping up with the "boredom binge", I now have a plain edge blade on my Bladeless; following the results from my serrated edge venture, I bought a Dollar Store paring knife to make a pseudo spear point knife blade ( the spine has no grinding to the point, it merely mimics the curvature of the belly) and, here's the result!
:woohoo:
man, thats sweet! how secure are those knives??? I'd love to see a video.
Post by: Juan el Boricua on May 17, 2020, 12:23:14 AM
As for the viideo; sorry my friend, I'm really tech challenged. :facepalm: But thanks for asking! :hatsoff:
If you'd like some other picture angle/detailed picture let me know to see what I can do.
Post by: ChopperCharles on May 27, 2020, 08:00:51 AM
Charles.
Post by: Juan el Boricua on May 31, 2020, 04:40:17 AM
Although I had asked for a Gerber 07510G (blunt nose with bit kit) sheath, whay I received is the standard nylon Center Drive sheath, and it holds my blunt nose, bit kit and saw blades perfectly. I like that the material appears to be stronger, a bit more compact, and is less bulky than the original was; reminds me of the newer gen. of Leatherman sheaths, but without the snap. I like that the logo's embroidered directly (as opposed to the MP's which is on a panel and then sewn onto the sheath), and the option to carry either vertically or horizontally. Speaking of which, my only dislike is that the horizontal carry loops are wider than the sheath and are "offcenter" to the sheath's right side, allowing it to "dangle" lower than the belt's edge; I prefer mine "to hug" the belt and be parallel to it.
For now, I'm pleased and happy with it, and wanted to put it here as an alternative for someone looking for a good sheath for a blunt nose... and keeping it all Gerber!
Post by: Juan el Boricua on May 31, 2020, 04:47:14 PM
:like:
Post by: Hevy (CT-782) on May 31, 2020, 05:24:38 PM
Enviado de meu moto g(6) usando o Tapatalk
Post by: ChopperCharles on June 02, 2020, 08:46:48 AM
Handle swap, custom pocket clip, awl from a sight tool, scissors and combo blade from an mp400.
Just needs that one carbide cutter to be finished.
Charles.
Post by: ChopperCharles on June 02, 2020, 08:51:58 AM
Charles.
Post by: ChopperCharles on June 02, 2020, 08:57:54 AM
I kept the blade instead of a saw in this one. All mp600s should come with this blade. There is no excuse for the tiny one that is in 99% of them.
Charles.
Post by: MTSebastian on June 02, 2020, 09:00:25 AM
Final mod for my sight tool. Added scissors from an mp400, awl from a center drive, and filled out the remainder of the tools from like-new spares. Swapped plier head with a brand new blunt nosed tool, as that is my preferred plier. Pocket clip is a zero tolerance titanium clip from eBay. This has the sexy new style lock sliders and the sight tool’s long Phillips and extra large blade.Your Mods are really great style
I kept the blade instead of a saw in this one. All mp600s should come with this blade. There is no excuse for the tiny one that is in 99% of them.
Charles.
The Blade in the ST is my favorite
Gesendet von meinem SM-A600FN mit Tapatalk
Post by: ChopperCharles on June 02, 2020, 09:01:52 AM
Charles.
Post by: ChopperCharles on June 02, 2020, 09:06:52 AM
Charles.
Post by: ChopperCharles on June 02, 2020, 09:10:47 AM
Charles.
Post by: ChopperCharles on June 02, 2020, 09:15:15 AM
Charles.
Post by: MTSebastian on June 02, 2020, 09:27:25 AM
If anyone has an mp600 with broken tools or wants to mod, I have lots of extra parts for trade.This sounds great! Can you send me a pm please?
Charles.
Gesendet von meinem SM-A600FN mit Tapatalk
Post by: Juan el Boricua on June 02, 2020, 01:16:49 PM
Anyone got a line on inexpensive carbide cutters? I need one for this gem.
Handle swap, custom pocket clip, awl from a sight tool, scissors and combo blade from an mp400.
Just needs that one carbide cutter to be finished.
Charles.
Nice mods there, CC; I'd have to say that the ST and "Faux Scout" are the best!
Maybe these will help,
https://forum.multitool.org/index.php/topic,71928.msg1730280.html#msg1730280
Good luck, and keep 'em coming!
:tu: :cheers:
Post by: Juan el Boricua on July 25, 2020, 02:14:23 PM
Post by: Max Stone on July 29, 2020, 09:33:19 PM
Post by: ChopperCharles on July 30, 2020, 09:31:07 PM
Compared to last time, you'll first off see I got a black titanium oxide coated clip instead of the bead blasted clip, to match the tool.
You'll also notice that I removed the lanyard ring and the awl from the Center Drive. In its place is a 1/4" socket driver from a SOG multi-tool. I bought the socket driver off the SOG website, and then ground and filed it to fit the MP600 profile. I then heated it up with a torch and dropped it into used motor oil to give it a DIY black oxide coating.
A rail of SOG bits and bitdriver adapter fits with the MP600 in a standard Gerber molle sheath. It's a really slick setup. The 1/4" socket tool makes the MP600 even more versitile. I can use the bitdriver adapter and bits in the tool. I can combine it with a cheap extension like you'd use in a power drill. I can use it for 1/4" drive sockets. I can use a real #2 bit instead of the compromise phillips driver, to get the maximum amount of bite and torque to a screw. My ST is now almost my perfect multitool... unless I happen to need a saw. Then I'm boned. Even so, it's still currently my favorite heavy-duty EDC. I'm debating swapping the scissors out for a saw, since I always have a Minichamp or Schrade DL-2 on my keys (depending on which vehicle I'm driving)... but will probably just leave this as it is.
Charles.
Post by: Juan el Boricua on August 07, 2020, 09:55:38 PM
Well let me fix that: :tu:
here's my bladed MP600 Bladdless out for today, helping with garden chores (here it is resting after clearing the banana and plantain "trees", twisting some bail wire to keep the plants tidy, and tightening the faucet's loose handle).
Post by: Barry Rowland on August 15, 2020, 02:26:14 AM
Post by: Edi on August 15, 2020, 05:11:03 PM
Post by: Edi on August 16, 2020, 03:25:21 PM
Post by: Juan el Boricua on August 16, 2020, 06:22:08 PM
Post by: Edi on August 17, 2020, 09:24:19 AM
Post by: Edi on August 21, 2020, 11:38:02 AM
Post by: SteveC on August 21, 2020, 04:11:10 PM
Post by: Juan el Boricua on August 29, 2020, 01:40:02 AM
Post by: SirVicaLot on August 30, 2020, 05:09:59 PM
Post by: Juan el Boricua on August 30, 2020, 10:59:56 PM
:cheers:
Post by: SirVicaLot on August 31, 2020, 01:24:04 AM
This one is a bit milder. It’s my first ever multitool. A MP600 pro scout I snagged on eBay for $14. I’ve since made it bladeless and swapped in the missing large flat driver. Also turned the end of the file into a gasket scraper. No clip on this one yet either, but it’ll have one eventually.
Charles.
Like the idea with the gasket scraper on the file. Will do that too once mine arrives! :tu:
Post by: SirVicaLot on August 31, 2020, 01:31:26 AM
Anyone got a line on inexpensive carbide cutters? I need one for this gem.
Charles.
I am looking into those atm, as I know that the Gerber ones are not the best. I found some, that should fit into the slots. They are not cheap, but I hope that they will be way more durable. Unfortunately I don‘t have a lot of experience with carbide cutters, so it‘s only a guess.
According to the website they are made for use on cast iron, stainless steel, steel, and Ti.
Post by: SirVicaLot on August 31, 2020, 01:33:29 AM
Hope you like it as I do mine; it's a workhorse of a tool, that can withstand abuse (albeit the replaceable cutters which tend to selfdestroy at the least provocation, and the medium flat driver located at the tip of the bottle opener). Its jaws open wider than most and you'll still be able to hold the handles one handed. Also, unlike the Leatherman Rebar Knifeless, it is a true knifeless as you can remove the Remgrit or replacement blade installed and carry it to places where even a saw blade is a no-go. Last-but-not-least, the flicking deployment; a great one-handed pliers deployment with cool fidget factor!
:cheers:
:cheers:
I see you have the LM bit kit in a lot of your photos. Any reason you use that over the Gerber one?
Post by: Juan el Boricua on August 31, 2020, 02:03:22 AM
Post by: SirVicaLot on August 31, 2020, 02:16:39 AM
Post by: Juan el Boricua on August 31, 2020, 02:26:47 AM
And vice versa; the Gerber will work on Rebar/Fuse/Super Tool's phillips driver (and so will do Ganzo's; choices, choices). :tu:
Post by: SirVicaLot on August 31, 2020, 03:04:14 AM
Post by: Juan el Boricua on August 31, 2020, 03:06:09 AM
Post by: Edi on August 31, 2020, 02:18:45 PM
Post by: Edi on August 31, 2020, 02:26:34 PM
The link to the little machine shop inserts is the correct one ( as noted here https://forum.multitool.org/index.php/topic,84840.0.html) but, if you don't mind me asking, why take the tools out just to have the pliers head; you will be defeating the purpose of a multi tool. Wouldn't you be better off having dedicated pliers?,they'll be stronger and cheaper (anyway, just MHHO).
I'm waiting for them to have it in stock again. Insurance, if i break the originals. And now after i played a little it is definitely only the blade, the part that i'm changing. But not entirely. I want to make an awl/reamer/punch out of it.
Post by: Juan el Boricua on August 31, 2020, 05:24:04 PM
i also use the lm adapter. It fits perfectly and i have 2 of those anyway. Tried it, it was like a glove, no need to buy something else. On the other hand, i took a chance on the cutters. They've cut a wire that i had doubts upon, without chipping or breaking. So, they're not completely trash at all. Harder/thicker... i'm not sure i'll use a mt anyway (toolbelt for actual work). It was a 2mm steel wire. Not very hardened but by no means soft as butter. Still can't upload photos, so... you'll have to take my word for it. The other mt's i've tested on harder stuff in order to see if they can do the job. Warranty might be fine, but if you have only one tool and need to do something and that tool breaks, warranty is just a meaningless word at that point :D
Sorry pal, Gerber considers the replaceable cutters as consumables and, altgough even the package states the "lifetime warranty" of Gerber products, it will be nil. Glad you're getting an extra pair 'cause, although I've been able able to cut hanger wire with them, I chipped one of the cutters when they suddenly closed on each other while pulling a nail. So, just waiting on them to ... :oops:
Post by: Juan el Boricua on August 31, 2020, 05:26:44 PM
I'm waiting for them to have it in stock again. Insurance, if i break the originals. And now after i played a little it is definitely only the blade, the part that i'm changing. But not entirely. I want to make an awl/reamer/punch out of it.[/b]
Now this sounds like a great idea! :tu:
Post by: Edi on August 31, 2020, 07:30:15 PM
[/b]Thank you!
Now this sounds like a great idea! :tu:
Post by: SirVicaLot on September 01, 2020, 02:13:37 AM
(http://www.justbenphotography.com/img/s/v-10/p3970545875-4.jpg)
Like that BO :)
The jigsaw blades came in as well. The metal ones work with no issues. The wood ones had a thicker shank :think:, so I took them to the belt sander. They work now as well :tu:
(http://www.justbenphotography.com/img/s/v-10/p3970545866-4.jpg)
I made a small sleeve out of shrink tube and duct tape, so that I can carry the additional jigsaw blades in the same pouch with the tool without scratching it.
(http://www.justbenphotography.com/img/s/v-10/p3970545652-4.jpg)
Really happy with the MP600 :cheers:
Post by: Juan el Boricua on September 01, 2020, 03:11:10 AM
May I also suggest making "sheaths" with slurpee/ frosty/ freezes large straws? Just cut to size, seal ends with a lighter, and open a slit for them to fit in.
Glad you like it, and hope it serves you well; all of mines have done so far!
Post by: SirVicaLot on September 01, 2020, 04:25:59 AM
Post by: SirVicaLot on October 04, 2020, 03:01:57 PM
8)
Post by: ElevenBlade on October 04, 2020, 04:43:58 PM
(http://www.justbenphotography.com/img/s/v-10/p3988543845-4.jpg)
8)
If I turn my head sideways this looks like a calendar picture
Post by: SirVicaLot on October 04, 2020, 06:20:08 PM
Post by: SirVicaLot on October 06, 2020, 12:59:01 AM
Decided to swap out the plier head. I kinda like this two tone look :tu:
Post by: Hevy (CT-782) on October 06, 2020, 04:24:34 AM
My first MP600. And I must say, I'm very happy with it!
(https://uploads.tapatalk-cdn.com/20201006/efbb6f9d41a7043f8e88f65dd49925d6.jpg)
Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on October 06, 2020, 12:49:20 PM
Post by: SirVicaLot on October 06, 2020, 03:30:39 PM
Post by: Hevy (CT-782) on October 06, 2020, 03:51:33 PM
Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on October 06, 2020, 11:30:21 PM
Post by: Juan el Boricua on October 21, 2020, 02:45:12 AM
Pretty happy with the results and, as usual, critiques and suggestions welcomed! :tu:
Edit- added a picture of "how it all started"; for anyone interested. Done with a Dremel using a reinforced cutting disc, tungsten cutter, and diamond bit.
Post by: SirVicaLot on October 21, 2020, 04:56:43 AM
Post by: Juan el Boricua on October 21, 2020, 12:51:54 PM
Post by: MTSebastian on October 22, 2020, 09:38:33 PM
Gesendet von meinem SM-A600FN mit Tapatalk
Post by: Juan el Boricua on November 02, 2020, 03:54:44 PM
Post by: SirVicaLot on November 03, 2020, 01:49:15 AM
Post by: Juan el Boricua on November 30, 2020, 11:46:19 PM
Post by: ElevenBlade on December 01, 2020, 01:49:54 AM
Made me a mini awl for the MP Basic; I chipped the small flat driver while working on bikes to be scrapped, and opted for this instead. Has already proven functional on wood, PVC, and coconut.
As long as it functions on coconut, it's ready for deployment!
Post by: Juan el Boricua on December 01, 2020, 01:54:51 AM
Post by: ElevenBlade on December 01, 2020, 01:59:59 AM
Right on! :salute: :doh:
I mean... c'mon, what are you more likely to encounter on a deserted island, and will really need to get through? PVC or a coconut?? :pok:
Post by: Juan el Boricua on December 01, 2020, 02:02:26 AM
Post by: SirVicaLot on December 01, 2020, 03:09:36 AM
Made me a mini awl for the MP Basic; I chipped the small flat driver while working on bikes to be scrapped, and opted for this instead. Has already proven functional on wood, PVC, and coconut.
Great work, Juan! :tu:
Post by: Juan el Boricua on December 01, 2020, 03:31:54 AM
Post by: Hevy (CT-782) on December 01, 2020, 02:02:50 PM
Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on December 01, 2020, 02:04:56 PM
Post by: Hevy (CT-782) on December 02, 2020, 05:55:15 PM
(https://uploads.tapatalk-cdn.com/20201202/4e8576a6c00929958639b5c1a6798f36.jpg)Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on December 07, 2020, 06:41:43 PM
Post by: SirVicaLot on December 08, 2020, 01:47:24 AM
Post by: Juan el Boricua on December 08, 2020, 02:14:06 AM
Post by: Hevy (CT-782) on December 08, 2020, 02:36:55 AM
Since I started doing slight mods to the MP Basic after chipping the mini driver, decided to add a saw. Not wanting to take apart any of my other tools, and having an unused Wave add-on saw blade, decided to modify it and reprofiled it with the Dremel following the SE blade's profile. It fits pretty well between the can opener and chassis (albeit it won't fit with an anticlumping washer) and, so far so good.Well done!
Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on December 08, 2020, 02:56:28 AM
Post by: Ocruz77 on December 12, 2020, 07:35:40 PM
Complete multi tool newbie here but I just purchased a couple of used MP600’s and I’m a tinkerer. I want to tear them down. Is there a place in the universe where I can find the tool for the safety nut they use. I’ve looked and looked but can’t seem to find a driver, wrench or socket. Can anyone help. I don’t want to use pliers.
Post by: Juan el Boricua on December 12, 2020, 08:12:47 PM
You can check under https://forum.multitool.org/index.php/topic,61708.0.html
For loki's wrenches, or here for DIY alternatives
https://forum.multitool.org/index.php/topic,52129.msg1992985.html#msg1992985
And remember, :worthless:
Good luck and happy modd'ing! :tu:
Post by: Ocruz77 on December 13, 2020, 02:27:22 AM
Thanks a million pa. And thanks for the warm welcome. I have been looking for these tools like crazy. I really appreciate the help. I need to get to 5 posts so I can PM Loki. Here is number three. %uD83D%uDE01
Post by: Ocruz77 on December 13, 2020, 02:40:31 AM
Nice Gerber DIY. I am going to try it.
Post by: Ocruz77 on December 13, 2020, 02:44:16 AM
Post by: Juan el Boricua on December 13, 2020, 03:50:36 AM
Post by: Juan el Boricua on December 13, 2020, 05:54:14 PM
Either will work; so does plain mineral oil (personal preference as it is a food-safe lube), from the expensive Victorinox to the one found in most pharmacies/drug store/homegoods stores. I've heard also gun oil, 3-in-1, Frog Lube, and others.
Needed to clarify that the one I'd recommend from homegoods stores is the one used for conditioning wood cutting boards and/or utensils, and not the one for honing knives or such.
Post by: SirVicaLot on December 13, 2020, 07:26:18 PM
Needed to clarify that the one I'd recommend from homegoods stores is the one used for conditioning wood cutting boards and/or utensils, and not the one for honing knives or such.
I have never tried that one, will give it a shot next time :tu:
Post by: Juan el Boricua on December 13, 2020, 10:35:02 PM
Post by: SirVicaLot on December 14, 2020, 02:30:50 AM
Don't sweat it SirVicaLot; from the label/SDS, most cutting board oils are in fact food-grade-human-safe mineral oil. For it's price, I prefer the medical/laxative-grade, as it performs the same but at a cheaper price. My pharmacy bought bottle has been going strong for five years lubing multiools and garden tools without failure, rust, or "funny tastes" (and appears to be enough still for another five!) :facepalm: :rofl:
Sounds like a good deal to me :tu:
Post by: SirVicaLot on January 01, 2021, 08:27:09 PM
Bladeless MP gets pocket time again :cheers:
Post by: SteveC on January 02, 2021, 01:55:16 PM
Post by: Hevy (CT-782) on January 03, 2021, 03:13:56 AM
I loved the two colors patern. Great pic.
Enviado de meu moto g(6) usando o Tapatalk
Post by: SirVicaLot on January 03, 2021, 04:41:38 PM
Post by: Juan el Boricua on January 17, 2021, 09:21:50 PM
Post by: SteveC on January 17, 2021, 11:52:24 PM
Post by: colinoutdoors on January 19, 2021, 01:32:18 PM
Sent from my AGS2-W09 using Tapatalk
Post by: Juan el Boricua on January 19, 2021, 01:46:35 PM
Pictures when it arrives... :popcorn:
Post by: SteveC on January 19, 2021, 03:40:51 PM
Post by: colinoutdoors on January 20, 2021, 08:34:22 PM
Post by: Juan el Boricua on January 21, 2021, 12:07:04 AM
:woohoo: :woohoo:
:tu: :like:
Post by: colinoutdoors on January 22, 2021, 04:57:41 PM
Post by: Juan el Boricua on January 22, 2021, 05:00:06 PM
Post by: SirVicaLot on January 22, 2021, 05:35:27 PM
Post by: colinoutdoors on January 26, 2021, 07:03:19 PM
Post by: Juan el Boricua on January 26, 2021, 07:26:11 PM
:2tu: :cheers:
Post by: Hevy (CT-782) on January 27, 2021, 05:49:40 PM
Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on February 19, 2021, 10:45:09 PM
Post by: Hevy (CT-782) on February 20, 2021, 04:15:49 AM
Beautifull stainless Betas
Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on February 20, 2021, 12:58:03 PM
Post by: SurgeUk on February 20, 2021, 08:12:02 PM
Post by: Juan el Boricua on February 20, 2021, 09:56:40 PM
Post by: SurgeUk on February 20, 2021, 10:25:41 PM
Good one, Surge. :tu::cheers: :salute: :tu:
Post by: SirVicaLot on February 21, 2021, 02:05:08 AM
Used my only Gerber (scissors) to cut up an expired credit card (TBH it was hard work) ::)
I believe that, those cards are surprisingly hard to cut. Good job for your MP though :tu:
Post by: SurgeUk on February 21, 2021, 02:06:21 PM
I believe that, those cards are surprisingly hard to cut. Good job for your MP though :tu::hatsoff: :cheers:
I used my Surge last time and no issues for the scissors there ;)
Post by: SirVicaLot on February 22, 2021, 02:12:33 AM
:cheers:
Post by: Juan el Boricua on February 22, 2021, 06:10:20 AM
:hatsoff: :cheers:
I used my Surge last time and no issues for the scissors there ;)
Heeyyyy...not fair! :pok: :rofl:
Post by: Juan el Boricua on February 22, 2021, 06:14:40 AM
Post by: SirVicaLot on February 23, 2021, 03:17:39 AM
SirVic, that's one nice picture you have there; and to think that we're already in the low 80's (or mid 20's, depending on units read)... :dd: :tu:
Thanks! 20C sounds lovely. Just last week we had -23C here :ahhh
Post by: SurgeUk on February 23, 2021, 05:10:54 PM
(https://www.justbenphotography.com/img/s/v-10/p4134549819-4.jpg)That is an amazing shot :tu: :like:
:cheers:
Post by: SurgeUk on February 23, 2021, 05:11:49 PM
I calls it, like I sees it :dunno: :rofl:
Heeyyyy...not fair! :pok: :rofl:
Post by: Juan el Boricua on February 23, 2021, 07:19:29 PM
Post by: SirVicaLot on February 25, 2021, 03:27:41 AM
Post by: Hevy (CT-782) on March 07, 2021, 01:51:22 AM
Some working in home. With help of my son!(https://uploads.tapatalk-cdn.com/20210307/3bc026115a08ba8264e1ebbce435effa.jpg)
Post by: SirVicaLot on March 07, 2021, 02:47:58 AM
Post by: Juan el Boricua on March 07, 2021, 04:41:27 PM
Post by: Hevy (CT-782) on March 07, 2021, 09:33:27 PM
Nice pictures SirVicaLot and Hevy; and that looks like a complete portable kit there! :tu:Thanks guys!
That's a near complete kit. It's missing another mini box and a Dremel.
The two mini box are for the Dremel tools. Very portable indeed!
Post by: SirVicaLot on March 14, 2021, 04:48:50 AM
Still loving my MP(s). Great modding platform :cheers:
Post by: Juan el Boricua on March 14, 2021, 05:37:17 AM
(https://www.justbenphotography.com/img/s/v-10/p4134549892-4.jpg)
Still loving my MP(s). Great modding platform :cheers:
:iagree: :like:
:iagree: :like:
That, and the many models between the series with nice features to mix and match (blunt nose, needle nose, both with integral or replaceable cutters; scissors, awl, plethora of screwdrivers, short or long shank phillips SD, blade exchanger,...), ease of disassembly and to work with, the ability to accept tools from other series (MP400, Suspension, Suspension NXT), affordable prices, and quite bulletproof are some of the reasons of why it is such a good mod fodder and one of my favorites.
Post by: ElevenBlade on March 14, 2021, 04:51:26 PM
:iagree: :like:
:iagree: :like:
That, and the many models between the series with nice features to mix and match (blunt nose, needle nose, both with integral or replaceable cutters; scissors, awl, plethora of screwdrivers, short or long shank phillips SD, blade exchanger,...), ease of disassembly and to work with, the ability to accept tools from other series (MP400, Suspension, Suspension NXT), affordable prices, and quite bulletproof are some of the reasons of why it is such a good mod fodder and one of my favorites.
Is that actually the case? Without creating a spreadsheet and going all OCD on it, I think it's true There do seem to be more mixes and matches with Gerber than Leatherman. :think:
I think you're on to something.
Post by: Juan el Boricua on March 14, 2021, 04:56:27 PM
:cheers:
Post by: Juan el Boricua on March 14, 2021, 05:00:15 PM
Post by: ElevenBlade on March 14, 2021, 05:03:34 PM
Post by: Juan el Boricua on March 19, 2021, 05:30:50 AM
Post by: Hevy (CT-782) on March 19, 2021, 12:35:34 PM
Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on March 19, 2021, 12:44:20 PM
Post by: 3Stars@1Sun on March 26, 2021, 09:37:10 AM
i just got hold of this new old stock, unopened, undamaged (packaging) pro scout locally yesterday. there is some yellowing and clouding of the front part probably due to sun exposure while the back part is still clear.
(https://i.imgur.com/WbpVM9pl.jpg)
(https://i.imgur.com/21Vb0Zyl.jpg)
based on the packaging this is between 2005-2011. it took me almost a whole day to get this info established.
this is my first mp600 but not my first gerber as i have a mpt with leather sheath.
now i am struggling to decide whether to open this or keep it as it is a part of my (tiny) collection ??? ::)
to open or not to open :dunno:
Post by: Juan el Boricua on March 26, 2021, 02:30:00 PM
Do as you think will bring you the most enjoyment! Undeniable that it is a :multi: that I :like: very much so, happy tooling! :tu: :cheers:
Post by: SirVicaLot on March 26, 2021, 03:19:53 PM
Post by: gregozedobe on March 28, 2021, 04:10:15 PM
Post by: Juan el Boricua on March 28, 2021, 04:19:47 PM
Post by: 3Stars@1Sun on March 29, 2021, 07:39:00 AM
Congratulations on your find, 3stars1Sun; I think the blunt nose with integrated cutters pliers head is one of best from all of the mt's, second to the Surge/Super Tool 300 ones. As if to open or not, it's your call, pal; I believe tools are meant to be used so, I'd open them. Also, looking that the blister package is not pristine/A-1, that would affect its "collector's value" and it looks that it is still found rather inexpensive.
Do as you think will bring you the most enjoyment! Undeniable that it is a :multi: that I :like: very much so, happy tooling! :tu: :cheers:
gracias amigo ;) i only have a lm charge tti as the other unopened mt in my possession so it looks like i will have to free this mp600 from it's 'cage' :D
:iagree: Open it! It is a tool, it is meant to be used :tu:
it is meant to be used :salute:
exactly the same answer i got when i posted the same question of 'to use or not to use' a pristine vintage meerschaum pipe that i scored.
i guess my posting the question really exposes me as a greenhorn :whistle: :D
If you intend to use it then open it, but if it is only for your collection then leave it in the packaging.
no urgency but it may eventually be 'freed'. i'm very curious of the looseness associated with mp600s as i have mostly lm's and a few swisstools. the mods i've seen in the other threads here also means i may need to start building up my list with a few more mp600s so i can swap parts around :D
Post by: SirVicaLot on March 29, 2021, 03:49:12 PM
Post by: SirVicaLot on July 24, 2021, 04:51:39 PM
(https://www.justbenphotography.com/img/s/v-10/p2871651300-4.jpg)
My newest one. Liking the blunt nose pliers :cheers:
Post by: Juan el Boricua on July 24, 2021, 09:03:08 PM
:tu: :cheers:
Post by: SirVicaLot on July 24, 2021, 10:03:29 PM
Post by: Hevy (CT-782) on July 26, 2021, 01:49:41 AM
I like te integral cutters much more than the replaceable ones.
Enviado de meu moto g(6) usando o Tapatalk
Post by: Juan el Boricua on July 27, 2021, 12:49:13 AM
Post by: Juan el Boricua on July 27, 2021, 12:56:38 AM
Post by: Max Stone on July 27, 2021, 08:24:27 AM
Post by: Juan el Boricua on July 27, 2021, 02:58:12 PM
Post by: EPZombie51 on August 01, 2021, 05:50:53 PM
Thanks,
EPZombie
Post by: Juan el Boricua on August 01, 2021, 05:54:14 PM
Post by: Dunc on August 02, 2021, 09:49:26 AM
Post by: Vjdotson on September 19, 2021, 02:56:12 PM
Post by: Juan el Boricua on October 18, 2021, 06:21:13 AM
Post by: pa_strunk on October 18, 2021, 05:48:20 PM
Post by: David on October 18, 2021, 08:05:31 PM
Nice :tu:
:iagree:
Post by: Juan el Boricua on October 18, 2021, 09:17:15 PM
Post by: Vjdotson on October 21, 2021, 08:46:16 PM
I have to give credit to Sam Lim Shuang Ping from the Multitool.org FB site...he posted pics of one of his MP600s that inspired me! :cheers:
Post by: Sam Lim on November 05, 2021, 05:50:20 AM
So, I had knee surgery on Monday and have had a bit of time on my hands. I took an old MP600 BO, sanded/polished/notched the side of the frame, recontoured the plier head, added a pocket clip, and threw in tools from the MP600 BO, eFect, Suspension, and Suspension NXT using hardware from an MP700 Urban Legend. I had one more spot left, so I drilled out the Simonds file from a Version 5 Multi-Plier and reshaped the pivot a bit. I really like the results...my second bladeless tool!
I have to give credit to Sam Lim Shuang Ping from the Multitool.org FB site...he posted pics of one of his MP600s that inspired me! :cheers:
:salute: These 600s are great! Built like a tank! Love what u did with the modifications to make it truly yours. :tu:
Post by: Juan el Boricua on November 29, 2021, 05:19:56 AM
Post by: Dunc on December 09, 2021, 08:16:18 PM
Post by: Syncop8r on January 11, 2022, 07:01:10 AM
(http://gallery.multitool.org/var/resizes/Syncop8r/Gerber-MP600/IMG_20211216_161359.jpg?m=1639971495)
(http://gallery.multitool.org/var/resizes/Syncop8r/Gerber-MP600/IMG_20211216_161553.jpg?m=1639971495)
Post by: SurgeUk on January 11, 2022, 07:35:17 AM
I think I'm in the right place? :think:
(http://gallery.multitool.org/var/resizes/Syncop8r/Gerber-MP600/IMG_20211216_161359.jpg?m=1639971495)
(http://gallery.multitool.org/var/resizes/Syncop8r/Gerber-MP600/IMG_20211216_161553.jpg?m=1639971495)
Very nice :drool:
Post by: Juan el Boricua on January 11, 2022, 11:15:59 PM
I think I'm in the right place? :think:
(http://gallery.multitool.org/var/resizes/Syncop8r/Gerber-MP600/IMG_20211216_161359.jpg?m=1639971495)
(http://gallery.multitool.org/var/resizes/Syncop8r/Gerber-MP600/IMG_20211216_161553.jpg?m=1639971495)
Indeed you are, Sir! :like:
Nice sheath!
Post by: Dunc on February 08, 2022, 04:55:42 PM
Post by: Juan el Boricua on February 09, 2022, 01:45:37 AM
Post by: Dunc on February 09, 2022, 07:50:40 AM
Nope; both my blunt-nose and my Basic have it only in one, next to the can opener.
Thanks Juan , i have 2 needle nose and one blunt nose , one of the needle nose is stamped twice ( one on each handle ) . I did wonder if it’s something they started to do then decided it wasn’t needed.
Post by: Dunc on February 09, 2022, 08:11:34 AM
Post by: Juan el Boricua on February 10, 2022, 01:36:14 AM
Post by: Dunc on February 10, 2022, 08:15:35 AM
It is also my understanding that the last two numbers of the code are the year, but the first three might be model number; all my MP600's (6) begin with 087, while the NXT's (2) begin with 915, Dime with 466, and EAB Lites(5) with 897.
I totally agree with the last two digits being the year but I don’t think the first three are model numbers because my Mp600’s , Strongarm , Fastball and impromptu pen ( all U.S made or assembled ) start 087
Post by: Juan el Boricua on February 10, 2022, 11:56:42 AM
Post by: Juan el Boricua on May 27, 2022, 05:32:23 AM
Post by: SirVicaLot on May 27, 2022, 02:22:01 PM
Post by: Juan el Boricua on May 30, 2022, 02:55:00 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: SirVicaLot on May 30, 2022, 05:13:50 PM
Post by: Juan el Boricua on July 29, 2022, 07:41:14 AM
Post by: Juan el Boricua on August 16, 2022, 11:44:14 PM
[ This attachment cannot be displayed inline in 'Print Page' view ]
...and now we know what is global and what is stil USoA made.
Post by: Dunc on August 24, 2022, 10:10:51 AM
(https://live.staticflickr.com/65535/52307872079_59931377ed_k.jpg) (https://flic.kr/p/2nGgvZr)02C3E42A-1943-468F-B9B7-F24E71BF333D (https://flic.kr/p/2nGgvZr) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
Post by: Juan el Boricua on August 25, 2022, 10:14:36 PM
Just got a new Mp600 in black and was surprised to see they add the black oxide finish to the serrated blade after the edge has been ground. Never seen this before on a blade
(https://live.staticflickr.com/65535/52307872079_59931377ed_k.jpg) (https://flic.kr/p/2nGgvZr)02C3E42A-1943-468F-B9B7-F24E71BF333D (https://flic.kr/p/2nGgvZr) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
That was my thought exactly but, at least in my examples, all three of mine were quite sharp; not affected by the oxidation process!
Post by: Dunc on August 26, 2022, 07:22:32 AM
That was my thought exactly but, at least in my examples, all three of mine were quite sharp; not affected by the oxidation process!
I’d always assumed the blades were sharpened after the knife was assembled to reduce the risk of injuring the assembler. Definitely not the first time I’ve been wrong :rofl:
Post by: Antti Lammi on October 31, 2022, 03:22:37 PM
(https://uploads.tapatalk-cdn.com/20221031/4ea9688aef00e452fc4d8f962f062f81.jpg)
Now i have Centerdrive, modded MP600, BO MP600 and MP800
Only Tools Matters
Post by: nakken on October 31, 2022, 03:50:18 PM
Nothing like a brand new BO :drool:
Post by: s_a_c on January 15, 2023, 05:13:36 AM
Mods:
1. Removed AR sight tool and added gerber armbar slim bit driver. Driver tool and MP600 frame both had to be modded a good bit to allow fitment. NOTE: attempted to modify the AR sight tool initially to accept a bit extension but this is not recommended as it is easier and cleaner to just add the bit driver from the armbar, and also allows for another short tool to be added in the stack due to the armbar driver having a slimmer profile.
2. Added scissors, Tshank adapter (for leatherman surge file, Tshank saw blades, etc), and large flathead with V notch.
3. HSS cutter inserts installed and are much much better. I have cut wire hangers, barbed wire, etc with them and not even the slightest damage.
4. EPI insta-black 370SS sample kit on the way to blacken the modified portion of the frame, bit driver, and satin tools.
Also may add Wire Stripper tool from SOG powerlock in near future as I’ve already done this mod to my other MP600 I have.
Sent from my iPhone using Tapatalk
Post by: Swisster on January 16, 2023, 08:10:40 AM
Post by: Dunc on January 25, 2023, 10:15:30 AM
Post by: Barry Rowland on July 26, 2023, 04:37:59 AM
Post by: SteveC on July 27, 2023, 10:52:05 AM
Post by: Juan el Boricua on July 30, 2023, 03:52:33 PM
Post by: Barry Rowland on July 30, 2023, 04:42:14 PM
Post by: Juan el Boricua on July 30, 2023, 07:31:35 PM
Me too! It was supposed to be delivered yesterday :facepalm:
:sa: :sa: :poh:
Post by: Barry Rowland on July 30, 2023, 08:11:12 PM
Post by: Barry Rowland on August 02, 2023, 06:33:28 AM
Post by: Dunc on August 02, 2023, 10:12:10 PM
Finally! It needs some TLC but I finally have a 600 :ahhh
Very nice , I see it’s an older model as it is stamped USA with the older logo but has the replaceable wire cutters so it’s a later old model.
I’m sitting here appreciating the awesomeness of the Strongarm fixed blade which is also accompanied by one of my MP600’s
(https://live.staticflickr.com/65535/53089664259_d13799e626_k.jpg) (https://flic.kr/p/2oTmpyX)IMG_8637 (https://flic.kr/p/2oTmpyX) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
Post by: Barry Rowland on August 02, 2023, 11:12:25 PM
Post by: Dunc on August 05, 2023, 08:57:02 AM
Thanks Dunc! It has a broken can opener but that's not a big deal. It has virtually no wear on it. It was right to open the tools, so I gave it a good cleaning and some oil and it works well. I was wondering how to date it. The replaceable cutters made me think it was a later model. I knew someone that picked up one of these in the Army and never carried anything else. Nice looking Strongarm by the way :tu:
Hi Barry , does it have a code later etched on one side of the handle ?
(https://live.staticflickr.com/65535/53094921685_30214bb463_k.jpg) (https://flic.kr/p/2oTPmqe)IMG_8639 (https://flic.kr/p/2oTPmqe) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
Or a number stamped on the inside of one of the handles ?
(https://live.staticflickr.com/65535/53094699449_ac990f07bb_k.jpg) (https://flic.kr/p/2oTNdmz)IMG_8640 (https://flic.kr/p/2oTNdmz) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
Post by: Barry Rowland on August 05, 2023, 04:52:00 PM
Post by: Dunc on August 05, 2023, 09:09:09 PM
This isn't the best picture, but this is the only numbers on it that I can find.
That’s a fairly early one mate , must be one of the first to have replaceable cutters
Post by: Barry Rowland on August 06, 2023, 01:37:34 AM
Post by: Juan el Boricua on August 07, 2023, 04:07:54 AM
Finally! It needs some TLC but I finally have a 600 :ahhh
Congrats, Barry, nice score!!! It looks like the previous owner switched pliers head; still, a great tool! :woohoo: :tu:
And to the best of my knowledge, those chassis/handles do not have date codes. :oops:
Post by: Barry Rowland on August 07, 2023, 04:33:48 AM
Post by: Juan el Boricua on August 07, 2023, 04:42:39 AM
Oooh, I also run two of my MP's in CD sheaths: one in nylon and the other in the leather one!
Post by: Barry Rowland on August 07, 2023, 05:42:27 PM
I ordered the leather sheath from Gerber. I figured I could use it for both.
I'm more than likely going to send mine in for the can opener, although I've never modded anything and a saw would be so nice!
When did they switch to a Wharncliffe blade? Mine has one and I was surprised.
Post by: Barry Rowland on August 12, 2023, 11:20:21 PM
Post by: SteveC on August 13, 2023, 01:44:14 PM
Post by: Barry Rowland on August 13, 2023, 05:44:21 PM
Post by: Barry Rowland on August 13, 2023, 05:48:26 PM
Post by: zoidberg on August 15, 2023, 11:34:54 AM
After looking at some of the older posts here, I think the previous owner converted the can opener to an awl. I'll say this it's definitely sharp!
:worthless:
Post by: Barry Rowland on August 15, 2023, 05:10:47 PM
Post by: zoidberg on August 16, 2023, 10:26:51 AM
Post by: Juan el Boricua on August 30, 2023, 12:40:19 AM
[ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Barry Rowland on August 30, 2023, 03:30:28 AM
Post by: Juan el Boricua on August 30, 2023, 06:59:17 PM
Post by: Juan el Boricua on September 03, 2023, 02:03:21 AM
Post by: Barry Rowland on September 03, 2023, 04:36:11 AM
Post by: Juan el Boricua on September 03, 2023, 09:04:42 PM
Post by: Juan el Boricua on September 11, 2023, 11:44:52 PM
Post by: Barry Rowland on September 12, 2023, 02:41:52 AM
Post by: Dunc on September 14, 2023, 10:09:01 PM
(https://live.staticflickr.com/65535/53187790940_938c84b3a6_k.jpg) (https://flic.kr/p/2p32kdh)IMG_8761 (https://flic.kr/p/2p32kdh) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
Post by: Barry Rowland on September 15, 2023, 01:10:59 AM
Post by: Juan el Boricua on September 15, 2023, 04:24:42 AM
My current collection
(https://live.staticflickr.com/65535/53187790940_938c84b3a6_k.jpg) (https://flic.kr/p/2p32kdh)IMG_8761 (https://flic.kr/p/2p32kdh) by Duncan Moore (https://www.flickr.com/photos/161056490@N04/), on Flickr
Now, this is nice ... ! :like: :like: :like: :like: :like: :like: :like: :like:
Post by: marlowe221 on October 06, 2023, 01:02:12 AM
What do I mean?
Well, earlier this year I started a thread about buying my first pliers-based multitool because I had never had one before. I ended up buying a Leatherman Curl which I have very mixed feelings about.
But it turns out that I had already owned a pliers-based multitool for 25 years or so. But in my mind it "didn't count" for some reason. I guess because I always kept it in my guitar bag. I found that this tool was handy for little guitar maintenance tasks and just kept it in an old bag with guitar strings, picks, polishing cloths, and other guitar supplies.
Today, I was digging in the guitar bag and pulled it out. For some reason, I looked at it in a whole new light...
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
So, apparently, I am not a super smart man. I have owned a pliers-based multitool since the late 90s or so. I purchased this with one of my first paychecks from the hardware store I was working at after school when I was 16 (I think?). I never carried or used it much except what I described above, that I came to think of it as my "guitar tool" and kept it with my guitar stuff. It has stayed in my guitar bag all these years and I've never used it for anything else.
The weird thing is that if someone had asked me if I owned a multitool in all those years, I would have said "No, I don't" without hesitation or any intent to deceive or lie. For some reason it just... didn't count. :think: :dunno:
At any rate, I believe I bought this Gerber in 1998 when I was 16 years old. It is marked as made in the USA and patent pending, etc. I think (?) it's an MP600, or maybe the predecessor to the MP600. But I thought I would post it here and I'm sure y'all will let me know if it is a different model.
Either way, it's in great shape, the sharp tools are very sharp, and the pliers still slide in and out of the handles with ease. Just thought I would share!
Post by: powernoodle on October 06, 2023, 01:05:42 AM
Post by: Barry Rowland on October 06, 2023, 01:22:42 AM
Post by: marlowe221 on October 06, 2023, 01:28:20 AM
That's in fantastic shape Marlowe!
Well, I guess that's what happens when it sits in its pouch in a bag and only gets used a few times per year.... for 25+ years!
So... is it a MP600?
Also, I think I like this tool better than the brand new Leatherman Curl that managed to put a deep gouge in it's own pliers head just by opening and closing it a couple of times...
Post by: Barry Rowland on October 06, 2023, 04:42:21 AM
https://forum.multitool.org/index.php/topic,74830.0.html
Post by: marlowe221 on October 06, 2023, 06:08:34 AM
I'm no Gerber expert by a very long shot, but I believe you have the Multiplier, which is the predecessor of the MP600.
https://forum.multitool.org/index.php/topic,74830.0.html
Oh no, I’ve posted in the wrong thread!
That makes sense though. I was never aware of any model number or name. It was just “a Gerber.”
Post by: Barry Rowland on October 06, 2023, 03:33:26 PM
Post by: Juan el Boricua on November 24, 2023, 08:36:31 PM
Post by: Barry Rowland on November 24, 2023, 09:37:17 PM
Post by: Juan el Boricua on November 24, 2023, 10:19:01 PM
Post by: Barry Rowland on November 25, 2023, 08:50:02 PM
Post by: Barry Rowland on November 26, 2023, 04:16:52 PM
Post by: Juan el Boricua on November 26, 2023, 04:55:55 PM
Post by: Barry Rowland on November 26, 2023, 10:02:44 PM
Post by: VICMAN on December 03, 2023, 11:55:21 PM
Click on pictures for full pictures
Post by: FolderBeholder on December 04, 2023, 12:39:00 AM
Post by: VICMAN on December 04, 2023, 12:40:23 AM
Looks great Vicman! :like:
Thank you FB! :cheers:
Post by: VICMAN on December 05, 2023, 12:49:10 AM
:ahhh
Very nice Barry! :like: :cheers:
Post by: Barry Rowland on December 05, 2023, 02:54:44 AM
Post by: VICMAN on December 05, 2023, 04:04:30 PM
Thank you Vicman! That's an MP 600 Basic I ordered for my son who is also a participant in our challenge, Spartan 19. The biggest difference is in the cutters, which are non replaceable.
You are welcome Barry! :cheers:
Post by: VICMAN on December 15, 2023, 09:06:09 PM
Post by: Barry Rowland on December 15, 2023, 09:48:47 PM
Post by: VICMAN on December 16, 2023, 02:03:40 AM
That's great Vicman!!
Thank you, Barry! :cheers:
Post by: Juan el Boricua on December 16, 2023, 01:56:17 PM
Congratulations. :hatsoff: :cheers:
Post by: VICMAN on December 16, 2023, 04:26:34 PM
Vicman, you've a great start there; they're both great tools and that long screwdriver is the best from Gerber! :2tu:
Congratulations. :hatsoff: :cheers:
Thank you, Juan! :cheers:
Post by: Juan el Boricua on December 18, 2023, 01:19:33 AM
Spoke head- 1, carbide cutters- 0;
2nd round: Spoke head-0, HSS cutters- 1 FOR THE WIN!! :woohoo: :2tu:
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Barry Rowland on December 18, 2023, 02:07:25 AM
:ahhh :woohoo: :ahhh
Post by: VICMAN on December 18, 2023, 07:54:52 PM
I'm not participating in "The Spur of the Moment Challenge" (https://forum.multitool.org/index.php/topic,91660.0.html) but, this would've made a great action shot:
Spoke head- 1, carbide cutters- 0;
2nd round: Spoke head-0, HSS cutters- 1 FOR THE WIN!! :woohoo: :2tu:
That is nice to know Juan! :cheers:
Post by: Juan el Boricua on December 19, 2023, 02:15:14 AM
Post by: VICMAN on December 19, 2023, 02:28:39 AM
Thank you, Vicman, it sure is! :cheers:
You are welcome Juan! :cheers:
Post by: Juan el Boricua on December 25, 2023, 10:00:10 PM
Here to share my newest: an-almost -all-original, hardly-used (I'd say the combo blade and nothing else much) blunt nosed Pro Scout down to the OE Remgrit blade; almost, because of my own stupidity I snapped the spring holder in two trying to "make it perfect" after resharpening and straightening the blade, cleaning and oiling the tool.
But, being desperate and compulsive, decided to cobble up a replacement out of an old and unused stainless water bottle. Shown are the results and, as tested, performs quite well until I can get an OE one. [ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ]
what you all think? :oops:
Post by: Barry Rowland on December 25, 2023, 10:17:39 PM
Post by: Juan el Boricua on December 25, 2023, 10:23:19 PM
(I still punch myself for not participating in the challenge!!!!!!! :facepalm: :bnghd: :pommel:)
Post by: Barry Rowland on December 25, 2023, 10:38:58 PM
Don't worry Juan, with the exception of this January and March, I'll do the challenge with you anytime you want to!
Post by: Juan el Boricua on December 25, 2023, 10:58:33 PM
Perhaps get a Bladeless, and replace the can opener for a plain or combo edge blade? This because its the only spot left for a long tool. [ This attachment cannot be displayed inline in 'Print Page' view ]
Or ... get a Pro Scout!; the only things missing are the replaceable cutters and largest, single-tooled flat driver.
Edit- another option is to your model of choice replace a tool for a Suspension or Diesel wood saw.
Post by: Barry Rowland on December 25, 2023, 11:11:16 PM
I had a 400 and I really like the scissors. This is shaping up into a fun time!
Post by: Barry Rowland on December 26, 2023, 04:04:50 AM
Post by: Juan el Boricua on December 28, 2023, 01:25:33 AM
I love the idea, (hence my fondness for the Bladeless, Pro Scout, DET and, Leatherman's Surge) as I can have multiple blade types and, can exchange blades when broken/worn/type needed without sending the tool over for a month or more to have it replaced (and this is also why I use bit drivers in most of my tool kits) . The only caveat with Gerber's is that they're limited by its type (old, u-type shank with a hole in the middle) and thickness ( can accept those that are up to 1.18mm). I can get them through email orders or, modify as available/needed ( the mounted one, and the middle two are t-types modified by myself, the one on the left is a u-shank one that has its shank ground to the required thickness and, the Remgrit is OE). [ This attachment cannot be displayed inline in 'Print Page' view ]
Some more examples; the mounted one was bought on clearance, as part of a set of ten blades for $1USD, and the other four are custom ones (the serrated and plain edged blades were made from steak knives ... :doh:): [ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Juan el Boricua on December 28, 2023, 01:48:04 AM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Barry Rowland on December 28, 2023, 05:07:58 AM
Post by: pa_strunk on December 28, 2023, 05:21:23 AM
Post by: Juan el Boricua on January 04, 2024, 05:35:49 AM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: FolderBeholder on January 04, 2024, 02:20:42 PM
Post by: Barry Rowland on January 04, 2024, 03:20:46 PM
Post by: Spartan19 on January 15, 2024, 03:17:07 PM
Post by: Barry Rowland on January 15, 2024, 04:11:03 PM
Post by: Juan el Boricua on January 15, 2024, 08:59:54 PM
:multi:
Nice combo! :multi: :like:
Post by: Spartan19 on January 17, 2024, 01:43:38 AM
Nice combo! :multi: :like:
Thanks! :hatsoff:
Post by: Spartan19 on January 17, 2024, 01:43:55 AM
:like: :like: :tu: :tu:
:hatsoff: :hatsoff:
Post by: Juan el Boricua on January 30, 2024, 04:18:47 AM
[ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Barry Rowland on January 30, 2024, 04:21:47 AM
Post by: Juan el Boricua on January 30, 2024, 04:23:49 AM
Post by: FolderBeholder on January 31, 2024, 04:52:17 AM
Post by: Spartan19 on February 01, 2024, 08:34:49 PM
Post by: JonesE on February 01, 2024, 08:46:33 PM
:multi:
Great picture. :like: :tu:
Post by: Juan el Boricua on February 01, 2024, 08:49:09 PM
Post by: Barry Rowland on February 02, 2024, 04:35:06 AM
Post by: Juan el Boricua on February 06, 2024, 04:56:21 AM
Post by: Barry Rowland on February 07, 2024, 01:51:03 AM
Post by: Juan el Boricua on February 07, 2024, 02:10:13 AM
Post by: Juan el Boricua on February 10, 2024, 05:46:38 PM
Post by: JonesE on February 11, 2024, 02:50:39 AM
Post by: Juan el Boricua on February 11, 2024, 03:47:54 AM
Post by: Barry Rowland on February 11, 2024, 03:57:04 AM
Post by: Juan el Boricua on February 11, 2024, 03:59:23 AM
Post by: Barry Rowland on February 11, 2024, 04:02:30 AM
Post by: Barry Rowland on February 11, 2024, 04:04:00 AM
Post by: Juan el Boricua on February 11, 2024, 04:04:23 AM
Post by: Juan el Boricua on February 11, 2024, 04:05:32 AM
Post by: Barry Rowland on February 11, 2024, 04:10:16 AM
Post by: Juan el Boricua on February 21, 2024, 02:09:43 AM
Simonds diamond sided file- :tu:
Awl- :tu:
No-nail nick/pull Phillips- :tu:
Nail nick on blade and file- :tu:
Fiskars branded scissors- :tu:
[ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ]
Post by: Juan el Boricua on February 21, 2024, 02:13:25 AM
[ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ]
Both are quite nice, and functional.
(But I'm thinking about converting the clone into a "Sportsman"; whatcha all think!?).
Post by: Barry Rowland on February 21, 2024, 03:40:41 AM
Post by: Juan el Boricua on February 21, 2024, 10:57:38 AM
Post by: Bigshep on March 02, 2024, 01:48:54 AM
Happy Holidays to everyone!I have one similar (needle nose) I don't like the original knife blade, it feels so thin and flimsy. What are my options?
Here to share my newest: an-almost -all-original, hardly-used (I'd say the combo blade and nothing else much) blunt nosed Pro Scout down to the OE Remgrit blade; almost, because of my own stupidity I snapped the spring holder in two trying to "make it perfect" after resharpening and straightening the blade, cleaning and oiling the tool.
But, being desperate and compulsive, decided to cobble up a replacement out of an old and unused stainless water bottle. Shown are the results and, as tested, performs quite well until I can get an OE one. [ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ]
what you all think? :oops:
New to the forum here btw, hi!
Sent from my SM-S908U using Tapatalk
Post by: Bigshep on March 02, 2024, 02:03:40 AM
Sent from my SM-S908U using Tapatalk
Post by: Barry Rowland on March 02, 2024, 02:10:31 AM
Post by: Juan el Boricua on March 02, 2024, 02:31:02 AM
If after all you'd like to still replace it, your "plug in" options are: newer/later MP blade (Wharncliffe style; thicker, and same choices between combi blade and plain edge ones. Although they're supposed to be the same alloy, does not have the same edge retention as yours), an earlier Multi Lock or same vintage plain edge or fully serrated blade; a Diesel blade might work, as it looks to be the same as in the discontinued
Post by: Bigshep on March 02, 2024, 02:56:49 AM
Welcome BigShep and, let me say that's one nice "hand-me-down" you've there! As for the blade, it might look flimsy but, it is quite good and sturdy for a multi tool knife; perhaps give it a chance?Thanks for the info! I will look into the options you mention. I will likely leave it as it is as I usually carry another blade anyway and this one doesn't hurt to leave in it's original home.
If after all you'd like to still replace it, your "plug in" options are: newer/later MP blade (Wharncliffe style; thicker, and same choices between combi blade and plain edge ones. Although they're supposed to be the same alloy, does not have the same edge retention as yours), an earlier Multi Lock or same vintage plain edge or fully serrated blade; a Diesel blade might work, as it looks to be the same as in the discontinued DET model or in the Snap On version. Another option is to go bladeless, as I did a clone of a Bladeless model by replacing the combo blade with asmalllarge flat driver (and the replaceable cutters head; here it is https://forum.multitool.org/index.php/topic,52129.msg2456899.html#msg2456899). After this, I think your options are custom ones. Good luck and again, welcome! :cheers:
The person who gave me this one was tired of the "flimsy" case (velcro was old). So he didn't carry it anymore. I was happy to adopt it.
Sent from my SM-S908U using Tapatalk
Post by: MPnut on March 14, 2024, 04:03:40 PM
ML600 work EDC. I previously carried a BN gen 2 or 3 original tool and i’ve toyed around with switching this head to a BN as i prefer it and this is usually backed up with a MP400 in the waist pack
Sent from my iPhone using Tapatalk
Post by: Barry Rowland on March 14, 2024, 04:09:33 PM
Post by: MPnut on March 16, 2024, 03:22:19 PM
My only 600’s. A BN pro scout is being considered though to round out the scissor 600’s
Sent from my iPhone using Tapatalk
Post by: Barry Rowland on March 16, 2024, 04:11:43 PM
Post by: MPnut on March 16, 2024, 04:28:33 PM
Not a bad couple to have though! :like: :like:Agreed! :)
Sent from my iPhone using Tapatalk
Post by: madfishcat on March 16, 2024, 06:30:46 PM
Post by: SteveC on March 18, 2024, 12:42:17 PM
I'm a little afraid to leave thoughtless comments, because... The administrator decided to award me the title of spam for one post, but your couple is not bad! :)
The spam box is default until you specify the country you're from in your profile. You can go to your profile page and select the country and then it will show a flag instead of the spam box.
Welcome to the forum :cheers:
Post by: madfishcat on March 18, 2024, 04:58:16 PM
I apologize to the admins for thinking badly about them for a couple of minutes. SteveC sincere thanks!
From the last one, I took 600 stainless blunt nose on old stamps for only 45$. By the way, the washers from the Chinese counterfeit fit perfectly with the original, only the hole needs to be drilled out a little. Let's see what condition it's in, but from the photo it looks like everything is fine
Post by: Juan el Boricua on March 18, 2024, 10:41:46 PM
Post by: Juan el Boricua on March 18, 2024, 10:42:55 PM
Post by: Barry Rowland on March 19, 2024, 12:14:09 AM