Multitool.org Forum
Trade Forums => Multitools for Sale => Topic started by: matt2silver on March 06, 2016, 06:11:54 PM
-
Hello Everyone,
I need to free up some funds so it’s time to clean out the Multitool / Pocket knife drawer.
- Here’s what you need to know:
All transactions are handled through paypal.
Shipping costs are included with the price of the tool.
All shipping is handled through the USPS.
Everything ships from Pennsylvania.
I will ship overseas but the shipping costs have to be paid by the buyer and the buyer accepts all risks associated with shipment to his or her country i.e. knife laws, lost packages, etc.
These tools are not listed anywhere else.
The first “I’ll take it” gets it.
The only trades that I'm interested in right now are for Spyderco Sages, or a SOG EOD spike multitool component.
(http://i1289.photobucket.com/albums/b510/matt2silver/Collage%201_zpsjdcio0a0.jpg) (http://s1289.photobucket.com/user/matt2silver/media/Collage%201_zpsjdcio0a0.jpg.html)
1. Spyderco Dragonfly - $35 – Catch and release. I got this as part of a trade. It was orange and I RIT dyed it to a beautiful dark red. The previous owner damaged the tip slightly so you’ll notice that the blade has been reprofiled to fix the issue. - SPF
2. Spyderco Persistance - $30 - Great condition. I stone washed the blade and then resharpened to a finely polished edge. I carried this knife quite a bit but never used it hard so it is still in great shape with no blade play, nice lock up, and good blade centering. - SPF
3. Spyderco Manix - $70 - Like New. I cut paper with it but it is otherwise new.
4. Spyderco Endura SS - $65 - Used but in very nice condition with a factory edge and light marks on the Stainless scales from pocket carry. Blade centering is very good and there is no blade play.
5. Benchmade Ritter Griptilian - $100 - Purchased from bladeforums. Previous owner put put a mirror edge on it at 17 degrees per side. He used it very little and very lightly and I did the same, only using it to open a bubble wrap package or two. Besides the mirror polished edge the knife is like new and is super sharp. Includes original packaging, paperwork, cloth bag, etc.
6. Victorinox Farmer - $30 - Lightly used nearly like new. comes with pocket hanger clip.
7. Ganzo G701 - $18 - Better than new. I bought this along with the Ganzo G 729 to see what all the hype was about with Ganzo knives and I have to say that I am very impressed. This is a great knife with very nice fit and finish. I say “better than new” because I replaced the teflon washers the knife had originally with new phosphor bronze washers so now the nice has a very smooth deployment. for $18 dollars you’d be hard pressed to find a nicer knife.
8. Opinel #7 - $6 - Lightly used with a forced patina. - SPF
9. Victorniox Gardener - $10 – flea market find. This little guy was at the bottom of a box of wood working tools. Signs of age but still in great shape with a beautiful blade.
(http://i1289.photobucket.com/albums/b510/matt2silver/Collage%202_zpsfxdaw7zi.jpg) (http://s1289.photobucket.com/user/matt2silver/media/Collage%202_zpsfxdaw7zi.jpg.html)
1. Leatherman Signal - Brand new out of box. This tool is in great condition. It has never been used and sports factory edges on all of the tools. - SOLD
2. Victorinox Spirit (Butter Knife) - $65 – Lightly used like new. No signs of use. Comes with your choice of leather or nylon sheath.
3. Leatherman Juice XE6 (old style) - $55 – used but in great condition. Scales show some signs of use but all tools are sharp and like new. - SPF
4. Leatherman PST -$25 each- I have 5 3 of these puppies, all of which are in great shape. All tools and implements are sharp and in good condition. These tools have been used and show some slight signs of use but are still in perfect working order and would make a great addition to your collection. I have four three silver PSTs and one black PST.
5. Custom Leatherman Wave -$150-This puppy is pretty AWESOME. I built it myself. Includes outside opening (and locking) scissors, S30V main blade, saw, serrated blade, rebar plier head, two bit drivers, eye glass screw driver, custom awl, and can opener. The tool handles have been acid etched and stone washed to give the tool a beautiful soft metallic luster and everything has been carefully reassembled and blue loctited in place to ensure proper tool in handle retention. All blades are extremely sharp and the handles fold closed completely with no gap.
6. Gerber MP600 Pro Scout - $40 - New. Includes sheath. - SOLD
7. SOG Power Plier - $30 - Used but built like a tank so it looks like new. - SOLD
8. Victorinox Cybertool - $70 – Received as part of a trade. Wonderful tool with very slight signs of use on the scales. The previous owner modified the large screw driver to include a wire stripper (see picture). All other tools are in great condition with factory edges. Includes all bits, tweezers, pins, tool picks etc.
9. MP 600 BO - $35 - Used like new. Includes sheath. - SOLD
(http://i1289.photobucket.com/albums/b510/matt2silver/Collage%203_zps201y0ded.jpg) (http://s1289.photobucket.com/user/matt2silver/media/Collage%203_zps201y0ded.jpg.html)
1. EagleTac AAA flashlight - $18 - Bought on EDCforums. Never carried by me. It’s in great shape and sports a cool white LED. No pocket clip.
2. Victorinox Minichamp - $14 - Used but in great condition.
3. Isotope Tritium Fob (Tritium not included) - $10 – bought this here on the forums and accidentally broke the trit after about a month of use. The old tritium vial has been removed and the fob is ready for a new vial to be installed. - SPF
4. Leatherman Style (Scissors) - New. - SOLD
5. Kindle Paperwhite Model #DP75SDI - $75 - Very light use, basically new. Comes with charging cable. The picture shows the battery to be dead only because I didn’t see the point in charging it just to take a picture.
6. Assorted Multitool Sheaths - $15 - Includes 2 leatherman Velcro style sheaths, one leatherman black leather sheath, an old leather gerber multitool sheath, a benchmade cloth sheath, and a misc leather sheath of unknown origins.
7. Fenix E12 - $15 - Great little AA flashlight. it has seen some use but is still in great shape. Cool white LED and 3 modes plus a hidden strobe mode that you access by cycling through the normal modes twice. - SOLD
8. Assorted SOG and Leatherman Components. - $12 - All components are in great condition. - SPF
9. Polaroid Cube Action Camera. - Used once or twice just for fun. I don’t use it a lot so I thought I’d pass it along. Comes with original packaging and all paperwork cables etc. - SOLD
-
PM sent on the BO PST
-
PM sent on persistance and custom wave.
Sent from my iPhone using Tapatalk
-
How much was the Signal?
-
Is the Wave new or original?
Sent from my Nexus 6 using Tapatalk
-
I'll take the Fenix E12. PM inbound.
-
Bo pst - sold
Fenix e12 - sold
Sog power plier -sold
-
I sent an email let me know or respond if you got it please. Thank you.
Sent from my iPhone using Tapatalk
-
Custom wave and spyderco persistence still available! !
-
It's the new wave
-
Hello!
How much would be the shipping to Spain for the XE6 and the LM-SOG components?
-
Hello!
How much would be the shipping to Spain for the XE6 and the LM-SOG components?
Hello AlexTool,
I think you've bought things from me before :). The package should be well under the 13 ounce limit for parcel post so I don't think the shipping would be too bad, maybe in the range of $16 to $18 dollars. I'll check after work tonight and get you an exact figure.
-
Signal went for $80 zoidberg.
-
PM sent for Dragonfly, PST, and Opinel.
Sent from my iPhone using Tapatalk
-
Thanks matt. :cheers:
-
Hello!
How much would be the shipping to Spain for the XE6 and the LM-SOG components?
Hello AlexTool,
I think you've bought things from me before :). The package should be well under the 13 ounce limit for parcel post so I don't think the shipping would be too bad, maybe in the range of $16 to $18 dollars. I'll check after work tonight and get you an exact figure.
Ok, I didn´t remember it
Thanks! :tu:
-
I am interested in the gerber pro scout and the 600 bo. Please send me a pm as i am unable due to the 5 post minimum, thanks.
-
I am interested in the gerber pro scout and the 600 bo. Please send me a pm as i am unable due to the 5 post minimum, thanks.
Post more :pok:
-
Gerber PRO scout - SPF
Gerber MP600 - SPF
-
PM sent for Dragonfly, PST, and Opinel.
Sent from my iPhone using Tapatalk
Hi Locnar, Your PM didn't go through to me. I've messaged you back with my email address.
Best regards,
Matt
-
I NEED A LEATHERMAN SIGNAL 😩
-
Payment sent, let me know if you need any more info. Thanks
-
Payment sent, let me know if you need any more info. Thanks
Thanks Brad, I just received your payment so those Gerbers will go out in either today's or tomorrow's mail. Thanks for your purchase!
-
PM sent for Dragonfly, PST, and Opinel.
Sent from my iPhone using Tapatalk
Hi Locnar, Your PM didn't go through to me. I've messaged you back with my email address.
Best regards,
Matt
Thank you for taking the time to respond Matt. I really appreciate it. Sent you a response via email.
-
I'll take the Opinel. PM incoming.
-
Initial offer for Dragonfly is retracted.
-
update (could a mod please amend the initial post to reflect these changes)
Dragonfly and Persistance are sold pending funding
SOG Power plier - sold
fenix E12 - sold
Gerber MP600 - sold
Gerber MP 600 Proscout - sold
BO PST - sold
1 normal PST - sold
Opinel #7 - sold pending funds
Leatherman XE6 - Sold pending funds
Tritium Fob - sold pending funds
Leatherman and Sog parts - sold pending funds
-
Hey guys, just wanted to let you know that as of this moment all of the packages are in the mail so make sure to keep an eye out if you've bought something. Also I'm adding a new item to the sale.
For Sale:
Benchmade Mini Griptilian 555HG (Sheepsfoot with opening hole) $75 (Includes shipping costs)
The condition is basically new. the blade still sports the factory edge and is still plenty sharp. The handle scales are black. Comes with the traditional benchmade pocket clip (the one that says benchmade on it). centering is good and blade play is typical of a griptilian (no up and down and slight side to side if you want it easy to swing open and closed). I've oiled the pivot with nano oil so the action is very smooth and the blade opens and closes effortlessly with manipulation of the axis lock or through a quick flick of the opening hole.
-
Hey guys, just wanted to let you know that as of this moment all of the packages are in the mail so make sure to keep an eye out if you've bought something. Also I'm adding a new item to the sale.
For Sale:
Benchmade Mini Griptilian 555HG (Sheepsfoot with opening hole) $75 (Includes shipping costs)
The condition is basically new. the blade still sports the factory edge and is still plenty sharp. The handle scales are black. Comes with the traditional benchmade pocket clip (the one that says benchmade on it). centering is good and blade play is typical of a griptilian (no up and down and slight side to side if you want it easy to swing open and closed). I've oiled the pivot with nano oil so the action is very smooth and the blade opens and closes effortlessly with manipulation of the axis lock or through a quick flick of the opening hole.
Did you get my pm?
-
Hi jday2727 pm didn't go through. Try posting directly to the thread
-
Hi jday2727 pm didn't go through. Try posting directly to the thread
What is your PayPal?
-
Hi jday2727 pm didn't go through. Try posting directly to the thread
I PM you.
Funds sent, please check it!
Thanks!!! :tu:
-
What blade steel is the Ritter? is the BM HG sold or still available? PM Sent
-
Ritter grip is s30v. I have guys who have already called dibs on both the grips but your next in line.
-
PM sent re: PSTII
-
I will take the Vic Minichamp.
-
I am assuming the Farmer that you have is silver, yes? I ask because in the picture, it looks, almost, white...which would be badass (in my opinion).
-
Hi Matt
Sorry for the delay. Items received perfectly days ago!
And thanks for the bonus! :salute: :tu:
-
Hi, sorry for the delay. Yes the farmer is silver. It's still available by the way :)
-
Do you still have a PST available?