Post by: VICMAN on February 08, 2018, 06:42:28 PM
In the early 1960's when Buck introduced the 110 Folding Hunter most knives sold from about $2.00 to about $6.00, (in 1963 Federal minimum wage was $1.25 an hour), so when Buck introduced knives starting at $16.00 many people said no one would buy them, but they used 440C stainless hardened to a Rockwell hardness of 58 to 60 RC which no one else was offering and they offered a lifetime warranty.
The Folding Hunter was originally designed as a knife that was solid like a fixed blade, but would give the horseman and hunter a knife he could carry safely when riding on horseback or in a vehicle. There is some danger with a fixed blade, if you fall on it regardless of the sheath design.
Buck envisioned it as a knife that would mainly be used by hunters just during hunting season each year, but the public saw the utility of it for edc use and it caught on rapidly and soon it was common to see a Buck 110 on the belt of the average working man.
It became the best selling knife in the world and was the most copied at that time. In 1964, they shipped 255 of them. In 1965, they shipped 2,500, and in 1966, 10,000, and it just kept growing from there. In the first 13 years they sold over 2 1/4 million Buck 110's.
Buck's warranty and use of a higher grade steel raised the bar for the other companies, and they ended up improving their products as a result. Owning a Buck knife meant holding a piece of quality craftsmanship built to last.
While it was not the first lockback knife,the Buck Folding Hunter is the knife that blazed the trail for all the other lockbacks that followed it. It is the knife that made it popular to carry a lockback for edc.
And that is why I have a fondness for the Buck 110 Folding Hunter.
Here are my Buck 110's with 3 Buck 112's on the right side.
Click on 569.83 for full picture.
Post by: ducttapetech on February 08, 2018, 06:48:02 PM
Post by: VICMAN on February 08, 2018, 06:54:31 PM
Nice collection!Thanks ducttapetech.
Post by: Mechanickal on February 08, 2018, 07:09:59 PM
Now I want a 110 even more! :facepalm:
Post by: styx on February 08, 2018, 07:25:16 PM
Post by: RR1551 on February 08, 2018, 07:49:07 PM
♂️Sent from my SM-G955U using Tapatalk
Post by: pfrsantos on February 08, 2018, 07:59:01 PM
Nice collection!
+1. Also, nice history lesson!
:salute: :cheers:
Post by: pfrsantos on February 08, 2018, 08:00:08 PM
:tu: :tu:
Post by: VICMAN on February 08, 2018, 08:03:14 PM
Oh come on!Everybody should own at least one Buck 110. LOL
Now I want a 110 even more! :facepalm:
Post by: VICMAN on February 08, 2018, 08:03:41 PM
that's one hell of a collectionThanks styx.
Post by: VICMAN on February 08, 2018, 08:04:25 PM
Coolness!Thanks RR1551.
Post by: Nix on February 08, 2018, 08:04:46 PM
When I was a kiddo (as opposed to just a kid at heart), the name 'Buck' was synonymous with quality. There was only one knife that I wanted, and that was a Buck 110. The price of a Buck put it out of reach for me at the time, but I knew I'd find a way to own one someday.
Eventually I did get my 110. And it was great. But of course time passes and trends change, knives come and go. I've now tried many different knives and brands, many of excellent quality, but I seem to return to the Buck 110 or 112. These days, I reach for my 110 (along with a trusty SAK) more often than any of the other folders I have. The Buck 110 just feels right in the hand, cuts and slices brilliantly, and looks simply elegant.
I'm really hoping the Buck 110 continues to win over both knife enthusiasts and non-knife people for another 50 years. :salute:
Post by: VICMAN on February 08, 2018, 08:05:26 PM
Thanks pfrsantos.Nice collection!
+1. Also, nice history lesson!
:salute: :cheers:
Post by: VICMAN on February 08, 2018, 08:11:22 PM
VICMAN, I think you are spot on.Thank you Nix.
.
I'm really hoping the Buck 110 continues to win over both knife enthusiasts and non-knife people for another 50 years. :salute:
I can relate to the feeling of when a Buck 110 was out of my price range and I wanted one so bad.
I agree that a Buck 110 and a SAK make a great combo.
I join you in "hoping the Buck 110 continues to win over both knife enthusiasts and non-knife people for another 50 years. "
:cheers: :cheers:
Post by: Barry Rowland on February 08, 2018, 10:47:52 PM
Post by: Aloha on February 09, 2018, 12:16:57 AM
Post by: SteveC on February 09, 2018, 12:26:13 AM
Post by: Barry Rowland on February 09, 2018, 12:38:34 AM
Post by: Nix on February 09, 2018, 12:51:56 AM
This post took me back a few years, to when I was a kid that wanted one badly but couldn't raise the money for one and had a cheap Pakistani lookalike for a brief period of time. Well....my son (Spartan 19) has one and it's riding alongside my GAK at the moment on my belt. Tomorrow I'm going to have my own! :D :D :D
:ahhh
We'll need photographs!
Post by: David on February 09, 2018, 01:12:37 AM
Post by: SteveC on February 09, 2018, 01:13:31 AM
This post took me back a few years, to when I was a kid that wanted one badly but couldn't raise the money for one and had a cheap Pakistani lookalike for a brief period of time. Well....my son (Spartan 19) has one and it's riding alongside my GAK at the moment on my belt. Tomorrow I'm going to have my own! :D :D :D
:ahhh
We'll need photographs!
+1 :popcorn:
Post by: Nix on February 09, 2018, 01:14:30 AM
I've gotten to a point in my life where I think other people would benefit from paying attention to what I say. I'm probably wrong about that, but it amuses me to think I have a useful opinion about certain things.
And breaking in a new Buck is one of those things. So let me pass of a few observations (and I'd love to hear if other people have ideas on this as well).
Many, if not most, of the new Buck 110's I've met have come from the factory with some grease, grunge, or something embedded in them. This leads to stiff opening, sometimes a gritty feel, and mysterious black stuff on the blade. I don't know if they intentionally over-grease the components before assembly or if this is just a result of their process. (It all seemed neat and tidy when I toured the factory.) I notice this with Buck much more than other knife makers.
So, when I get a fresh and new Buck 110 in my hands, I always grab a rag or two, a few Q-tips (or pipe cleaners, better yet) and a can of oil. Now, be careful, that thing is going to be pretty sharp. I give the whole thing, inside and out, a good spray of oil (Balistol, WD-40, 3-in-1, mineral oil, ATF, whatever you like). Really soak that in there. While it's still sopping wet, work the action back and forth a few times. You'll likely find some black gunk working out of the back lock and from the blade. Just keep wiping that away. I use the Q-tips to clean out the area inside the scales and down under the bottom of the blade. (I usually smash the Q-tips to get them to fit.)
Repeat.
Then I wipe away as much oil as I can and dry it off. At that point, check the edge. Usually, with any new knife, I find they benefit from at least a light stropping.
Finally, I usually finish off with a drop or two of lube in the action and on the spring. I keep working the action, opening and closing, with some frequency for a few days.
I think if you do this, you'll find the action becomes smoother and easier. Buck 110's, in my experience, are kinda like violins where they play better with age and use. At least that's my experience.
Hope you enjoy that new 110. Be safe!
Post by: SteveC on February 09, 2018, 01:16:33 AM
Post by: Barry Rowland on February 09, 2018, 01:36:42 AM
Barry,
I've gotten to a point in my life where I think other people would benefit from paying attention to what I say. I'm probably wrong about that, but it amuses me to think I have a useful opinion about certain things.
And breaking in a new Buck is one of those things. So let me pass of a few observations (and I'd love to hear if other people have ideas on this as well).
Many, if not most, of the new Buck 110's I've met have come from the factory with some grease, grunge, or something embedded in them. This leads to stiff opening, sometimes a gritty feel, and mysterious black stuff on the blade. I don't know if they intentionally over-grease the components before assembly or if this is just a result of their process. (It all seemed neat and tidy when I toured the factory.) I notice this with Buck much more than other knife makers.
So, when I get a fresh and new Buck 110 in my hands, I always grab a rag or two, a few Q-tips (or pipe cleaners, better yet) and a can of oil. Now, be careful, that thing is going to be pretty sharp. I give the whole thing, inside and out, a good spray of oil (Balistol, WD-40, 3-in-1, mineral oil, ATF, whatever you like). Really soak that in there. While it's still sopping wet, work the action back and forth a few times. You'll likely find some black gunk working out of the back lock and from the blade. Just keep wiping that away. I use the Q-tips to clean out the area inside the scales and down under the bottom of the blade. (I usually smash the Q-tips to get them to fit.)
Repeat.
Then I wipe away as much oil as I can and dry it off. At that point, check the edge. Usually, with any new knife, I find they benefit from at least a light stropping.
Finally, I usually finish off with a drop or two of lube in the action and on the spring. I keep working the action, opening and closing, with some frequency for a few days.
I think if you do this, you'll find the action becomes smoother and easier. Buck 110's, in my experience, are kinda like violins where they play better with age and use. At least that's my experience.
Hope you enjoy that new 110. Be safe!
Post by: Ray S on February 09, 2018, 01:46:34 AM
While I do agree that they set the bench mark for virtually all modern lockback knives and they are still very high quality, I find that they are still a bit handle heavy for extended use.Just my own personal preference;I still own several of them.One thing I do not like about them(and that includes all knives of that size)is the fact that they must be carried in a belt pouch which is extremely uncomfortable for me due to some ongoing back problems.I also cannot carry a pistol on a belt either for the same reason.
Having retired some years ago I do not find the need for a larger knife anymore and if I decide to carry a Buck it will usually be one of the several 500 series small lockbacks they offer. A particular favorite is one with brass liners and one piece handles that look for all the world like ivory.When I purchased it,it came in a small velvet bag. Have yet to see another one like it.
I also have many different Buck models with Kraton(or similar)handles that make excellent carry knives due to their size.
The Buck Titan(Model 186)was a favorite with me when I was working because even at the size of a 110 it only weighed about 1/2 of what the 110 weighed.Unfortunately they were about 3 times the price of a 110 when they were offered and never seemed to go over very well.
Anyway enough of that.I'm glad you enjoy them so much and continue to do so.
Post by: Poncho65 on February 09, 2018, 03:27:42 AM
Post by: LoopCutter on February 09, 2018, 04:11:14 AM
Was attempted just last night at a Sports Authority store, a 110!with leather sheath $28. Walmart has 110s with Córdoba or nylon sheath for about the same price.
I have one and it is to big for my work EDC as many sites have restrictions including some military bases that actually do search my truck occasionally.
Sent from my iPhone using Tapatalk
Post by: LoopCutter on February 09, 2018, 04:16:40 AM
My cousin had several in Vietnam, said he could get at PX for $5 or $6 and was worth a lot more away from base bartering for other important luxuries.
Sent from my iPhone using Tapatalk
Post by: Kampfer on February 09, 2018, 04:21:38 AM
I think 110 is an outdated design. Its biggest weakness is weight. 7.2oz! that is a lot of weight for a 3.75" blade.
I personally much fond with Mercator K55K.
Post by: getahl on February 09, 2018, 06:16:54 AM
Post by: Nix on February 09, 2018, 06:23:13 AM
I actually like the heft and feel of the venerable 110. The balance point, back in the handle, makes the blade feel light and lively to me. The handle provides a nice full grip. Probably one of the reason people have the impression the Buck 110 is a "Foldable fixed blade."
All knife designs involve some sort of compromise. A Chef's knife isn't a Fillet knife. The crucial thing is to find a knife that works for you. If the Buck is too heavy, look elsewhere. There are lots of thin and light-weight options out there. I just never saw the appeal.
Outdated? Nah. Just a solid knife that has stood the test of time. One might just as well say that the Food processor has made the Chef's knife outdated. No, the Buck 110 is still razor sharp and a brilliant knife to use.
Post by: pomsbz on February 09, 2018, 07:03:46 AM
Post by: Kampfer on February 09, 2018, 08:49:43 AM
110’s Scales are made very thick for the sake of comfortable in hand, but also made it it uncomdfortable to carry. The choice of using brass on 110 never sit well with me, it is heavy, soft and tarnish quickly. Look at the new 2018 110 lite, less than 50% of its oringal weight. Not as classy but a better tool.
Never less the 110 remains as an icon of its time, and that time is passed.
Nowadays we have knives that is 0.36” thick, 3.1oz with 4” blade.
Remember, the best knife is the one that you have when you need one.
Post by: Vladimir on February 09, 2018, 11:36:10 AM
:salute:
Post by: dks on February 09, 2018, 11:42:54 AM
In BF the claim i have seen is that the newer ones are not as strong/solid as the older ones, which is why many pay a premium for older versions, of the same knife.. I have a few but do not actually use them to know their limits.
Post by: VICMAN on February 09, 2018, 12:56:34 PM
Wow!!!!! :ahhh :ahhh :ahhh :like: :like: :like: :drool: :drool: :drool: Beautiful collection sir! I, too, remember the days when the companies you listed ruled the knife world, and in high school every boy I knew had a 110 or a lookalike hanging on his belt.Thank you Barry
Post by: VICMAN on February 09, 2018, 12:57:25 PM
Thanks for posting this.Thank you Aloha.
Post by: VICMAN on February 09, 2018, 12:58:03 PM
Great collection and nice history on the 110 :cheers: :salute: :tu:Thanks Steve.
Post by: VICMAN on February 09, 2018, 01:01:37 PM
This post took me back a few years, to when I was a kid that wanted one badly but couldn't raise the money for one and had a cheap Pakistani lookalike for a brief period of time. Well....my son (Spartan 19) has one and it's riding alongside my GAK at the moment on my belt. Tomorrow I'm going to have my own! :D :D :DGlad you enjoyed it Barry. That is cool to find out that Spartan 19 is your son.
Tomorrow will be a great day!
Post by: VICMAN on February 09, 2018, 01:04:10 PM
Reckon that is an impressive collection of 110's Vicman. Thanks for the trip down memory lane.Thanks David. Glad to hear that the Buck 110 is special to you too.
Post by: VICMAN on February 09, 2018, 01:07:42 PM
A most impressive 110 collection Vicman!Thank you Ray.
Post by: VICMAN on February 09, 2018, 01:08:49 PM
Great thread VMAN :like: :like:Thank you Poncho.
:salute:
Post by: VICMAN on February 09, 2018, 01:10:08 PM
VICMAN - I just drooled on my phone’s screen admiring another excellent collection.Thank you LoopCutter.
Post by: VICMAN on February 09, 2018, 01:20:15 PM
I am saying this in the most respectful way possible:I can appreciate your preferences. A lighter knife can be nice for daily use.
I think 110 is an outdated design. Its biggest weakness is weight. 7.2oz! that is a lot of weight for a 3.75" blade.
I have been carrying Bucks for so many years that the weight does not bother me. I carry a 110 vertically in my right back pocket.
The Buck 110 is a very solid reliable knife and is comfortable in the hand if you have to do extended carving with it.
A thinner handle can get uncomfortable if it has to be used over an extended period of time.
Each design has its advantages and disadvantages.
What is comfortable to one person is not for another.
Each person needs to use the one that fits their need, the one that feels natural in the hand to them.
Thanks for the reply and I do respect your preference.
Post by: VICMAN on February 09, 2018, 01:23:36 PM
I haven't found the weight of a Buck 110 to be an issue.
I actually like the heft and feel of the venerable 110. The balance point, back in the handle, makes the blade feel light and lively to me. The handle provides a nice full grip. Probably one of the reason people have the impression the Buck 110 is a "Foldable fixed blade."https://forum.multitool.org/index.php?action=profile;u=9851
All knife designs involve some sort of compromise.
Outdated? Nah. Just a solid knife that has stood the test of time. :like: :tu: :tu: No, the Buck 110 is still razor sharp and a brilliant knife to use.
Great explanation Nix!
Post by: VICMAN on February 09, 2018, 01:34:00 PM
At what point did they change from 440C to 420HC and does history report why they made the change? Were the knives always hollow ground as they are today?
Buck used 440C until 1981, then they switched to 425M from 1981 til 1992, and finally switched to 420C in 1994.
"The short answer for why Buck quit using 440C is that Buck wanted to fine blank their blades and 425M was suitable and 440C wasn't; they started fineblanking with 425M and moved to 420HC a decade later."
The Buck 110 has always been hollow ground.
Post by: VICMAN on February 09, 2018, 01:35:37 PM
Impressive collection!Thanks Vladimir.
:salute:
Post by: magentus on February 09, 2018, 01:39:38 PM
Question: Is there a UK legal non-locking Buck 110?
Post by: pomsbz on February 09, 2018, 01:43:11 PM
At what point did they change from 440C to 420HC and does history report why they made the change? Were the knives always hollow ground as they are today?
Buck used 440C until 1981, then they switched to 425M from 1981 til 1992, and finally switched to 420C in 1993.
"The short answer for why Buck quit using 440C is that Buck wanted to fine blank their blades and 425M was suitable and 440C wasn't; they started fineblanking with 425M and moved to 420HC a decade later."
The Buck 110 has always been hollow ground.
Has anyone done a comparison of the different metals used in what is essentially the same knife? I'm sure it was talked about at the time of the transition.
Post by: pfrsantos on February 09, 2018, 01:46:04 PM
Lovely stuff peeps :salute: This is one of a handful of truly iconic knives (SAK, Opinel among others) - gorgeous!
Question: Is there a UK legal non-locking Buck 110?
From the sheer size of the blade, I'd say no. Over here, any blade over 10cm is considered illegal to carry. What's the norm over there?
Post by: pfrsantos on February 09, 2018, 01:48:25 PM
:facepalm:
(https://lojadasfacas.pt/image/Noticias/faca.jpg)
The green line shows what's considered the blade length. Apparently, it's not just the sharp cutting edge...
Post by: magentus on February 09, 2018, 01:50:59 PM
3 inches / 7.5cmLovely stuff peeps :salute: This is one of a handful of truly iconic knives (SAK, Opinel among others) - gorgeous!
Question: Is there a UK legal non-locking Buck 110?
From the sheer size of the blade, I'd say no. Over here, any blade over 10cm is considered illegal to carry. What's the norm over there?
Oh well. At least that's that problem sorted :D Thanks Santos :salute:
Post by: Barry Rowland on February 09, 2018, 01:52:06 PM
Post by: VICMAN on February 09, 2018, 02:04:24 PM
Here is a quote from an interview with Chuck Buck Senior:
Has anyone done a comparison of the different metals used in what is essentially the same knife? I'm sure it was talked about at the time of the transition.
It took me a little while to pin Chuck Sr down with all his travel, but here it is...
"My grandfather and father did make knives out of files up to 1961 when we incorporated. Grandpa Hoyt died in 1949 and my father continued making the knives using Lignum Vitae wood for the handles. In the 40s he used Lucite and you know how that looks with the new Buck replica Hoyt Buck knife.
For the collectors, all of these wood handle and Lucite knives were made primarily out of files. Few were power hacksaw blades. You are correct that in 1961 we started using 440C, which is a very high-carbon, high chrome steel. I think the carbon is at 1.02 with a chrome of about 18%. It was an excellent steel but the carbides on the edge were very large and dulled reasonable quick. That is why we moved to the 425 modified (around 1985) so that the homogenized steel with the smaller carbides would not affect the edge so badly when they wore off the edge. (We went to 420hc in 1994) "
Post by: VICMAN on February 09, 2018, 02:13:13 PM
From the sheer size of the blade, I'd say no. Over here, any blade over 10cm is considered illegal to carry. What's the norm over there?
I live in Indiana in the US and there is no limit on blade length here.
Indiana Knife Laws
Indiana knife laws are very fair and somewhat strait forward.
What is Legal
Balisong knives are legal.
Bowie knive are legal.
Dirks, daggers, and stilettos are legal.
Assisted knives are legal.
Disguised knives like cane knives, lipstick knives, and belt knives are legal.
Switchblades and other automatic knives are legal.
What is Illegal
Ballistic knives are illegal.
Throwing stars are illegal.
Restriction on Carry
There are no limits to concealed or open carry as long as you do not bring a knife to school.
[/quote]
Post by: Nix on February 09, 2018, 02:27:47 PM
At what point did they change from 440C to 420HC and does history report why they made the change?
Keep in mind, too, that the 110 is now available in S30V, and, though harder to find, 5160. And Paul Bos does their heat treating for those. I think the 420HC they use now is still heat treated in-house. With the procedure designed by Bos--don't quote me on that--to include a cryogenic cooling treatment after being quenched. Not all 420HC is created the same; Buck seems to get this steel right.
Post by: pfrsantos on February 09, 2018, 02:28:28 PM
From the sheer size of the blade, I'd say no. Over here, any blade over 10cm is considered illegal to carry. What's the norm over there?
I live in Indiana in the US and there is not limit on blade length here.
Indiana Knife Laws
Indiana knife laws are very fair and somewhat strait forward.
What is Legal
Balisong knives are legal.
Bowie knive are legal.
Dirks, daggers, and stilettos are legal.
Assisted knives are legal.
Disguised knives like cane knives, lipstick knives, and belt knives are legal.
Switchblades and other automatic knives are legal.
What is Illegal
Ballistic knives are illegal.
Throwing stars are illegal.
Restriction on Carry
There are no limits to concealed or open carry as long as you do not bring a knife to school.
What is Legal
Knives with a blade with less than 10cm. This. All other options depend on it.
Assisted knives are in a grey area. They're not automatic but...
What is Illegal
Balisong knives.
Disguised/concealed knives like cane knives, lipstick knives, belt knives, etc.
Switchblades and other automatic knives.
Ballistic knives.
Throwing stars/knives.
Even bows/X-bows are considered weapons in the same category (armas brancas - "blade weapons").
You can't carry them (the legal ones) in sporting events, clubs, theaters, etc.
Post by: Nix on February 09, 2018, 02:43:11 PM
I live in Indiana in the US and there is not limit on blade length here.
In Montana towns and cities, a knife with a blade over 4" (~10.2 cm) is considered a conceal weapon, if worn concealed under your clothing. 'Switchblades' or Automatic knives are illegal. Any sized knife or sword can be carried about if it's not concealed. Dangerous weapons are banned from schools.
Outside of towns and cities, or if you have a CCW permit, you can carry whatever you like, however you like....except a switchblade. No Buck 110 Automatics for me. Not that I'd want one anyway.
Post by: LoopCutter on February 09, 2018, 02:54:49 PM
Many businesses have their own restrictions, usually “No Weapons allowed on Property”
Some are very common sense challenged to put it mildly.
I keep items concealed to avoid attention.
Sent from my iPhone using Tapatalk
Post by: VICMAN on February 09, 2018, 03:10:51 PM
Keep in mind, too, that the 110 is now available in S30V, and, though harder to find, 5160. And Paul Bos does their heat treating for those. I think the 420HC they use now is still heat treated in-house. With the procedure designed by Bos--don't quote me on that--to include a cryogenic cooling treatment after being quenched. Not all 420HC is created the same; Buck seems to get this steel right.
You are correct about the Bos heat treat and that not all 420HC heat treat is the same. Bos figured out how to get the most out of whatever type of steel he heat treated.
Post by: VICMAN on February 09, 2018, 03:15:18 PM
I agree with not trying to attract attention in today's society.
I keep items concealed to avoid attention.
It is a different world than when I was growing up.
Post by: LoopCutter on February 09, 2018, 03:21:32 PM
Sent from my iPhone using Tapatalk
Post by: Spartan19 on February 09, 2018, 03:30:24 PM
Post by: pfrsantos on February 09, 2018, 05:34:17 PM
I agree with not trying to attract attention in today's society.
I keep items concealed to avoid attention.
It is a different world than when I was growing up.
Yup, I miss the days when you could show your knife in public and compare it to what everyone else (yup, everyone!) was carrying...
:dd:
Post by: pfrsantos on February 09, 2018, 05:34:39 PM
I agree with not trying to attract attention in today's society.
I keep items concealed to avoid attention.
It is a different world than when I was growing up.
Yup, I miss the days when you could show your knife in public and compare it to what everyone else (yup, everyone!) was carrying...
:dd:
Miss the!
:hatsoff:
Post by: VICMAN on February 09, 2018, 06:26:47 PM
May ask where in Indiana you are?,I live in Richmond.
My sister and brother-in-law have lived in Fort Wayne since 1980
Post by: VICMAN on February 09, 2018, 06:27:54 PM
Great thread Vicman! For someone who comes from the "tactical" generation, I'll take a traditional knife any day! You just can't improve on perfection! :cheers:Thanks Spartan! :like: :tu: :tu:
Post by: VICMAN on February 09, 2018, 06:31:25 PM
Yup, I miss the days when you could show your knife in public and compare it to what everyone else (yup, everyone!) was carrying...
:dd:
I agree! I long for those times to return. :like: :tu: :tu:
Post by: Kampfer on February 09, 2018, 07:21:43 PM
Post by: Kampfer on February 09, 2018, 07:22:42 PM
My :hatsoff: to them.
Post by: Nix on February 09, 2018, 07:39:27 PM
I wonder how many people actually EDC the 110?
My :hatsoff: to them.
I'm just guessing here, but I'd estimate that I carried a 110 somewhere between 120-130 days in 2017, maybe a bit more. I carry a 110 often. I've made my own friction sheath for it, so it's a bit more accessible and easier to pull out. That little change really increased my 110 carry pattern. Seems like a small detail, but, for what ever reason, that made a difference for me.
Post by: Nix on February 09, 2018, 07:47:14 PM
Here's a fairly standard 110 with wood scales and brass bolsters, weighed out on my kitchen scale:
(https://i.imgur.com/IqDXyF3.jpg)
For the metrically challenged that's about 7.25 ounces (A bit shy of 1/2 pound). Not a feather-weight at all.
dks mentioned the Paperstone variant of the 110. Let's check out the "tale of the tape":
(https://i.imgur.com/xntzjCj.jpg)
Wow! Just 55% of the brass-lined 110's weight.
Here's the thing, for me, the handle of the Paperstone is just not as comfortable and the standard 110. The cut-outs are in odd places and create sharp edges that dig into the hand. Not a knife for extended use. I've considered giving this knife away....but then I've taken it on some hikes and canoe and kayak trips where I thought a lighter knife might be handy. So, for now, it stays in the rotation.
The Spyderco PM2 would seem to be a comparable knife to the 110. Similar handle length, slightly shorter blade. How does that stack up?
(https://i.imgur.com/qqN4X59.jpg)
Note: this is the way I carry this PM2, no clip, string lanyard. I was surprised that it came in so close to the Paperstone, it actually feels a bit heavier. Like the Paperstone, the handle of the PM2 just isn't as comfortable to me as the standard 110's handle is. I think they sacrificed comfort for a slimmer handle. That's my assessment, not the truth.
The Buck 110 has inspired many different knives and variations. This next one, Lakota Prohawk, is slightly smaller than a 110, but has an awesome clip blade. Steel bolsters, but it borrows the Buck's brass liners
(https://i.imgur.com/cL9xf1e.jpg)
So pretty darn close to the weight of a 110. This knife also rides nicely in a belt sheath, but there's no way I'd pocket carry it. The geometry is too awkward.
Lastly, I thought I'd compare the 110 to a large 'modern' Benchmade. The Contego is a bit larger than the Buck, so it isn't a completely fair comparison, but I don't see many people complain about the weight of the Contego.
(https://i.imgur.com/ybYNytg.jpg)
Surprised again! I figured the Contego would weigh in around 180-190 grams. Still, the Contego is designed to be worn in the pocket, using one of those annoying pocket clips (Mine still has it's clip on). So all that weight is pulling on your pants, not your belt. Maybe I should make a belt sheath for it and lose the clip. Hmmmm..... :think: The difference in weight between the Buck 110 and the mighty Contego is only 41 grams.
(https://i.imgur.com/SW1MGcD.jpg)
That's $1.06 in pocket change.
Interesting results, for me at least. Nothing Earth-shaking. And I'm certainly not going to let the weight of a little pocket change stop me from carrying one of the world's great folding knives.
Post by: VICMAN on February 09, 2018, 07:47:38 PM
I wonder how many people actually EDC the 110?
My :hatsoff: to them.
The weight has never bothered me, but at the moment I have a Vic 580 Clipper knife in my right front pocket, a Vic Cadet in my watch pocket of my jeans, a right side denim pocket I sewed on my jeans has a Vic Swiss Champ in it, my right rear pocket has a Buck 110 with Indigo Blue Scales and an S30V blade and a Case Trapper in it, my left rear pocket has a Buck 112 and a Case Carhartt Trapper in it, and my left front pocket has a Leatherman Supertool 300 and a Case Mini Trapper in it.
I also have a flip phone, and a pouch with a round diamond sharper and a sharpening steel, and a money clip in my right front pocket, a coin pouch in my right rear pocket and my car and house keys in my left front pocket......that is a normal days EDC for me and, with the exception of a flip phone, has been for over 30 years, so you can see why the weight of the Buck 110 does not bother me.
It just depends what a person is accustomed to.
Post by: dks on February 09, 2018, 07:53:42 PM
dks mentioned the Paperstone variant of the 110.
:ahhh :ahhh :ahhh Someone actually noticed :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :D
Sometimes I wonder if I should bother posting anything useful, or just stay in the spam threads... :rant: :D :D :D :D :D
Post by: VICMAN on February 09, 2018, 07:58:37 PM
dks mentioned the Paperstone variant of the 110.
:ahhh :ahhh :ahhh Someone actually noticed :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :D
Sometimes I wonder if I should bother posting anything useful, or just stay in the spam threads... :rant: :D :D :D :D :D
Keep posting dks. You really did have a useful post. :like: :tu: :tu:
Post by: Nix on February 09, 2018, 08:03:30 PM
The weight has never bothered me, but at the moment I have a Vic 580 Clipper knife in my right front pocket, a Vic Cadet in my watch pocket of my jeans, a right side denim pocket I sewed on my jeans has a Vic Swiss Champ in it, my right rear pocket has a Buck 110 with Indigo Blue Scales and an S30V blade and a Case Trapper in it, my left rear pocket has a Buck 112 and a Case Carhartt Trapper in it, and my left front pocket has a Leatherman Supertool 300 and a Case Mini Trapper in it.
I also have a flip phone, and a pouch with a round diamond sharper and a sharpening steel, and a money clip in my right front pocket, a coin pouch in my right rear pocket and my car and house keys in my left front pocket......that is a normal days EDC for me and, with the exception of a flip phone, has been for over 30 years, so you can see why the weight of the Buck 110 does not bother me.
It just depends what a person is accustomed to.
:sa:
Right now I have a Vic Outrider...and...a small flashlight.
(http://www.pic4ever.com/images/s050.gif)
Post by: VICMAN on February 09, 2018, 08:09:41 PM
LOL :like:
The weight has never bothered me, but at the moment I have a Vic 580 Clipper knife in my right front pocket, a Vic Cadet in my watch pocket of my jeans, a right side denim pocket I sewed on my jeans has a Vic Swiss Champ in it, my right rear pocket has a Buck 110 with Indigo Blue Scales and an S30V blade and a Case Trapper in it, my left rear pocket has a Buck 112 and a Case Carhartt Trapper in it, and my left front pocket has a Leatherman Supertool 300 and a Case Mini Trapper in it.
I also have a flip phone, and a pouch with a round diamond sharper and a sharpening steel, and a money clip in my right front pocket, a coin pouch in my right rear pocket and my car and house keys in my left front pocket......that is a normal days EDC for me and, with the exception of a flip phone, has been for over 30 years, so you can see why the weight of the Buck 110 does not bother me.
It just depends what a person is accustomed to.
:sa:
Right now I have a Vic Outrider...and...a small flashlight.
(http://www.pic4ever.com/images/s050.gif)
Post by: Kampfer on February 09, 2018, 08:32:28 PM
My Espada weights about 10oz, don't mind it at all. It speaks "Don't **** with me and back the **** off" fluently.
(http://forum.multitool.org/index.php?action=dlattach;topic=49951.0;attach=309776;image)
You can see I am actually a big fan of the 110 style folders, just not a fan of brass.
(https://forum.multitool.org/index.php?action=dlattach;topic=72925.0;attach=355920;image)
(https://forum.multitool.org/index.php?action=dlattach;topic=72925.0;attach=355922;image)
(https://forum.multitool.org/index.php?action=dlattach;topic=72925.0;attach=355924;image)
Post by: Nix on February 09, 2018, 08:36:46 PM
Post by: Kampfer on February 09, 2018, 08:41:03 PM
So a Buck 110 would actually be a step down for you..... :rofl:Yup, don't mind the 7oz at all, just the blade is too small for the weight.
Post by: Ray S on February 09, 2018, 09:04:27 PM
Post by: Vladimir on February 09, 2018, 09:14:26 PM
But than I saw that there is actually a smaller version, the 55, and that would be perfect for me.
It's just that I can't buy one locally, and sellers on eBay ask to much for shipping, so I keep looking.
But, I will get one, for sure.
Post by: VICMAN on February 09, 2018, 11:21:07 PM
You can see I am actually a big fan of the 110 style folders, just not a fan of brass.
Here's 3 Buck 110's you might like the looks of. They have S30V blades
Click on 903.89 for full picture
Post by: Kampfer on February 09, 2018, 11:22:12 PM
Love them :drool:
You can see I am actually a big fan of the 110 style folders, just not a fan of brass.
Here's 3 Buck 110's you might like the looks of. They have S30V blades
Click on 903.89 for full picture
Post by: VICMAN on February 09, 2018, 11:24:43 PM
Yup, don't mind the 7oz at all, just the blade is too small for the weight.
That is the difference in personal preference.
I prefer weight to be in the handle and you prefer to have the blade heavier.
There is no right or wrong, it is just what a person prefers.
You have some nice knives Kampfer! :like: :tu: :tu:
Post by: Kampfer on February 09, 2018, 11:33:28 PM
I love yours! Impressive collection. :tu:
Yup, don't mind the 7oz at all, just the blade is too small for the weight.
That is the difference in personal preference.
I prefer weight to be in the handle and you prefer to have the blade heavier.
There is no right or wrong, it is just what a person prefers.
You have some nice knives Kampfer! :like: :tu: :tu:
Post by: VICMAN on February 09, 2018, 11:54:26 PM
I thought it'd be interesting to do a little comparison of the weight of some of my big folders.Interesting comparison.
Nice group of knives Nix! :like: :tu: :tu:
Post by: VICMAN on February 10, 2018, 12:00:37 AM
I carry a 110 often. I've made my own friction sheath for it, so it's a bit more accessible and easier to pull out. That little change really increased my 110 carry pattern. Seems like a small detail, but, for what ever reason, that made a difference for me.
[/quote]
That is smart thinking Nix. It is good to experiment to find out which carry works best for you. :like: :tu: :tu:
Post by: Barry Rowland on February 10, 2018, 06:50:24 AM
Post by: magentus on February 10, 2018, 08:26:49 AM
Post by: LoopCutter on February 10, 2018, 02:38:01 PM
It does ooze quality when in hand;)
Sent from my iPhone using Tapatalk
Post by: VICMAN on February 10, 2018, 02:39:17 PM
Here she is, in all her glory! When I got to the store, there was only one left, which came in a tin and had a black leather sheath. I haven't cleaned it up yet, but what a piece of craftsmanship!Great pics Barry! Congratulations! :like: :tu: :tu: :cheers:
Post by: LoopCutter on February 10, 2018, 02:40:43 PM
(https://uploads.tapatalk-cdn.com/20180210/105370f1030f05c7eec2e96ef6f929c8.jpg)
Sent from my iPhone using Tapatalk
Post by: VICMAN on February 10, 2018, 02:44:50 PM
Home now and after a week discussing 110s, pulled mine out for a morning of work in the woods prepping dead logs for son’s fire place.
Great pic LoopCutter! :like: :tu: :tu:
Post by: ThePeacent on February 10, 2018, 02:48:09 PM
The other EDC folders are usually 5-6 oz. (Talwar, ZT0561, Rajah III, etc.) but the clip makes a difference.
Before I got used to carrying clipped knives I had a Gerber Gator (Large model, around Buck 110 length) that I carried in a SOG leather sheath and had no trouble with it, it was just slow to deploy. Clipped knives have the point of ease of access and deployment, as well as folding closed and putting it back in the pocket. :P
Nix, Many people carry their BM knives in BM nylon sheaths, clipless, maybe you ought to try that with the Contego :tu:
Oddly enough the PM is touted as one of the most comfortable OHO knives ever, it goes to show that we all have different hands and grips. :salute:
Kampf, I was astounded at your answer because I was thinking of all your XLs when you said too heavy, but I agree that the caveat is that the 110 is too heavy for the blade length it offers. ::)
That is compensated by an excellent handle with superb ergonomics, which make the difference in use.
as for how many EDC a 110, maybe now less than ever but at its peak I guess maybe dozens of thousands of people carried one in a belt, clipped, in a caddy or in their pocket in their daily activities just in the US alone :ahhh
the invention of clips and OHO methods probably were its doom, but nowadays it's as iconic as ever and still common sight among knife people
What works, works :cheers:
Post by: LoopCutter on February 10, 2018, 03:03:04 PM
Thank you VICMANHome now and after a week discussing 110s, pulled mine out for a morning of work in the woods prepping dead logs for son’s fire place.
Great pic LoopCutter! :like: :tu: :tu:
Sent from my iPhone using Tapatalk
Post by: Nix on February 10, 2018, 03:06:13 PM
El Peacent, good thoughts there. I may see if I have a sheath that works for the Contego or make a leather friction sheath. Truth be told, it's not a knife I carry much, but maybe that's because I'm not crazy about the ergos? I didn't mean to make the PM2 sound uncomfortable, it's not terrible or too uncomfortable. The PM2 has a thin handle which focuses the pressure narrowly. Many Spydercos are like this. It might be more a case of the 110 spoiling me for the feel of other big knives. :D
:like: :cheers:
Post by: pomsbz on February 10, 2018, 05:33:09 PM
Post by: Nix on February 10, 2018, 05:37:52 PM
Unfortunately I can't even think of a lockback due to local laws.
Really? No locking knives in Israel? Didn't know that. Sad.
Post by: VICMAN on February 10, 2018, 05:46:29 PM
as for how many EDC a 110, maybe now less than ever but at its peak I guess maybe dozens of thousands of people carried one in a belt, clipped, in a caddy or in their pocket in their daily activities just in the US alone :ahhh
the invention of clips and OHO methods probably were its doom, but nowadays it's as iconic as ever and still common sight among knife people
What works, works :cheers:
Nicely put Peacent.
Buck has made over 15 million Buck 110's since 1964.
When Spyderco introduced the pocket clip, it's serrated edge, and opening hole it made a big change in the types of knives offered by the different manufacturers and how they were carried.
Also when Michael Walker invented the liner lock and Chris Reeve took that idea and invented the frame lock it was a big game changer in folding knives.
:cheers:
Post by: Nix on February 10, 2018, 05:51:56 PM
When Spyderco introduced the pocket clip, it's serrated edge, and opening hole it made a big change in the types of knives offered by the different manufacturers and how they were carried.
Also when Michael Walker invented the liner lock and Chris Reeve took that idea and invented the frame lock it was a big game changer in folding knives.
:cheers:
Just a fad. These crazy kids with their holes in their blades and bits of wire sticking out their handles...sheesh...dang kids...they'll get learned someday.... (http://www.pic4ever.com/images/301.gif)
Post by: VICMAN on February 10, 2018, 06:00:25 PM
Just a fad. These crazy kids with their holes in their blades and bits of wire sticking out their handles...sheesh...dang kids...they'll get learned someday.... (http://www.pic4ever.com/images/301.gif)
[/quote]
:like: :tu: :tu: :cheers:
Post by: pomsbz on February 10, 2018, 07:42:22 PM
Unfortunately I can't even think of a lockback due to local laws.
Really? No locking knives in Israel? Didn't know that. Sad.
A lot of terrorist and mafia stabbings unfortunately make knife laws strict. A Leatherman passed under the radar though, everyone here has a Wave pretty much.
Post by: Nix on February 10, 2018, 07:49:32 PM
A lot of terrorist and mafia stabbings unfortunately make knife laws strict. A Leatherman passed under the radar though, everyone here has a Wave pretty much.
Bummer there, Buddy.
Post by: VICMAN on February 10, 2018, 08:04:35 PM
That is a shame about the strict knife laws, but it is good that you can have a Leatherman Wave. It is a very good edc companion.
A lot of terrorist and mafia stabbings unfortunately make knife laws strict. A Leatherman passed under the radar though, everyone here has a Wave pretty much.
Post by: SteveC on February 10, 2018, 08:25:21 PM
Here she is, in all her glory! When I got to the store, there was only one left, which came in a tin and had a black leather sheath. I haven't cleaned it up yet, but what a piece of craftsmanship!
Beauty !
That second pic would make a great calendar pic :pok:
Post by: Spartan19 on February 10, 2018, 09:35:52 PM
Here she is, in all her glory! When I got to the store, there was only one left, which came in a tin and had a black leather sheath. I haven't cleaned it up yet, but what a piece of craftsmanship!
:like: :like: Welcome aboard! :cheers:
Post by: Barry Rowland on February 11, 2018, 05:36:36 PM
Steve, I'd love to have that on the calendar! I saw that chimney flu door and thought it fit perfectly!
Post by: Nix on February 11, 2018, 06:48:51 PM
Post by: Mechanickal on February 11, 2018, 06:59:10 PM
Barry, I was thinking about doing a 30-day Buck 110 challenge....interested? Anybody else? :cheers:Nooooo!
Mine isn't here yet! :ahhh
Post by: Nix on February 11, 2018, 07:10:03 PM
How efficient is your Customs Office? :think:
Post by: Mechanickal on February 11, 2018, 07:39:07 PM
Well, I'm only 6 days into my Outrider challenge, so I couldn't start until......March 08 or there about.Let me compare that to our other gouvernment divisions...
How efficient is your Customs Office? :think:
Ooooh smurf!
Post by: Nix on February 11, 2018, 07:45:43 PM
Ooooh smurf!
Maybe next jaar? :think:
:cheers:
Post by: Mechanickal on February 11, 2018, 08:10:58 PM
Cross fingers.Ooooh smurf!
Maybe next jaar? :think:
:cheers:
Then again, how long can a piece of paper stay at customs? :shrug:
Post by: Nix on February 11, 2018, 08:14:05 PM
Post by: Spartan19 on February 11, 2018, 08:19:51 PM
Post by: VICMAN on February 11, 2018, 09:03:21 PM
(https://media.giphy.com/media/S4xYJkH7aWxby/giphy.gif)
Good one Nix! :rofl: :rofl:
Post by: Barry Rowland on February 11, 2018, 11:07:53 PM
Barry, I was thinking about doing a 30-day Buck 110 challenge....interested? Anybody else? :cheers:
Post by: Barry Rowland on February 11, 2018, 11:10:19 PM
Gorgeous Barry (and the knife :D) :like:
Post by: David on February 12, 2018, 04:25:07 AM
Here she is, in all her glory! When I got to the store, there was only one left, which came in a tin and had a black leather sheath. I haven't cleaned it up yet, but what a piece of craftsmanship!
Congratulations Barry! :tu: :like:
Post by: Barry Rowland on February 12, 2018, 05:29:04 AM
Post by: ThePeacent on February 12, 2018, 10:56:40 AM
El Peacent, good thoughts there. I may see if I have a sheath that works for the Contego or make a leather friction sheath. Truth be told, it's not a knife I carry much, but maybe that's because I'm not crazy about the ergos? I didn't mean to make the PM2 sound uncomfortable, it's not terrible or too uncomfortable. The PM2 has a thin handle which focuses the pressure narrowly. Many Spydercos are like this. It might be more a case of the 110 spoiling me for the feel of other big knives. :D
:like: :cheers:
no, no, don't get me wrong. :ahhh
Compared to traditional knives (Opinel, Okapi, Buck 110 etc.) the handles of the PM2 (and most other Spydercos) are horrible. :oops:
But the reason of that shape and thinness is mainly ease of carry and comfortable in the pocket, an addition to the clip. As Sal said, with a folding knife, it's 1-5% cutting and 99-95% carrying, so it is logical that the knife excels in the latter, while still remaining decent in the former.
(https://i.imgur.com/VTJAYZx.jpg)
The shape of modern folder handles is mainly a consequence of the clip, and the intended method of carry of those designs. The pocket clip was the addition around which you built the handle now. :o
If the clip weren't there and the knife was intended for sheath carry or pocket carry then the most obvious thing would be removing the clip and filling all that void space with rubber, wood, bone or other materials to have a solid, wide and comfortable surface to grab onto, like the Gerber Gators or the 110, among thousands of others
(https://i.imgur.com/lwU1ndF.jpg)
Some clips (like the Spyderco hourglass clip :pok:) have been developed and improved for decades to try and get some ergonomic lines and not be so uncomfortable in the hand, but the thing is clear and common among all brands:
(https://i.imgur.com/sTffOaA.jpg)
the clips were a game changer,
improving the carry-ability, accessibility and versatility of positions and carry methods
but worsening the ergonomics, comfort in the hand and results from their use in cutting
notable efforts to compensate for the lack of good grip are the BM Griptilian,
(https://i.imgur.com/ETN06W3.jpg)
the Spyderco Manix series
(https://i.imgur.com/VhHZLCf.jpg)
the Cold Steel Rajahs
(https://i.imgur.com/EWyRO9S.jpg)
and dozens of other knives that are wide, "chubby" and can easily be unclipped and sheath carried or pocketed :tu:
Post by: ThePeacent on February 12, 2018, 11:10:38 AM
Thanks everyone! I'm looking forward to EDC'ing it when the 111mm Challenge is over. The first thing that entered my mind when I unpacked it was that this knife was built like a tank! I never knew the frame was one piece of solid brass....like Peacent says, what works, works :D
Steve, I'd love to have that on the calendar! I saw that chimney flu door and thought it fit perfectly!
It'll be nice to see on your carry! :salute:
many people deem the Buck 110 an obsolete knife desing for defensive purposes, arguing that the lack of speed of deployment, or the possibilty of clipping it to the pocket makes it cumbersome, slow and useless.
(https://i.imgur.com/vIjbgps.jpg)
But let me tell you that if you really need a knife that bad, the Buck 110 is a solid (pun intended) choice, because even without the blade out, the solid brass and pommel will break bone, crack fingers and incapacitate hands. :o
Add to that, the fact that a blade may be more lethal and deadly, but a heavy blow is always more incapacitating and faster in its effects, immediately rendering someone unconscious, impaired or dead, especially aiming at the head, neck or spine. :oops:
(https://i.imgur.com/q2k9HMO.jpg)
It's also less messy, bloody and allows you to apply proper -and proportional to the threat- force in key points without doing permanent and ugly damage to the animal or person. Like a kubaton, or other bludgeon. >:D
Also takes away the risk of cutting yourself in the act or having a blade broken/stuck/lost in your attacker or other stuff during the encounter. ???
Not that I advocate any knife for defense, or that you meant that in your post, but these are things to consider in choosing a good and usable blade that would be good in such dire and improbable circumstances. :salute:
(https://i.imgur.com/PtGghCm.jpg)
there's also the legal aspect -looks friendlier and classier, like a more utilitarian blade design-, the usability aspect -a real workhorse of a knife, very good for most things- and the affordability aspect -it costs you $30 to replace if you lose it or have it confiscated-,
as well as the fact that the blade will always be there for your needs, tasks and other possible uses in inappropriate situations
Vamos,
que es a most excellent knife para most things (and that's why it's been so many decades with us :cheers:)
Post by: VICMAN on February 12, 2018, 03:12:49 PM
no, no, don't get me wrong. :ahhh
Compared to traditional knives (Opinel, Okapi, Buck 110 etc.) the handles of the PM2 (and most other Spydercos) are horrible. :oops:
But the reason of that shape and thinness is mainly ease of carry and comfortable in the pocket, an addition to the clip. As Sal said, with a folding knife, it's 1-5% cutting and 99-95% carrying, so it is logical that the knife excels in the latter, while still remaining decent in the former.
The shape of modern folder handles is mainly a consequence of the clip, and the intended method of carry of those designs. The pocket clip was the addition around which you built the handle now. :o
If the clip weren't there and the knife was intended for sheath carry or pocket carry then the most obvious thing would be removing the clip and filling all that void space with rubber, wood, bone or other materials to have a solid, wide and comfortable surface to grab onto, like the Gerber Gators or the 110, among thousands of others
Some clips (like the Spyderco hourglass clip :pok:) have been developed and improved for decades to try and get some ergonomic lines and not be so uncomfortable in the hand, but the thing is clear and common among all brands:
the clips were a game changer,
improving the carry-ability, accessibility and versatility of positions and carry methods
[/quote]
Great info and great pics Peacent! :like: :tu:
Post by: VICMAN on February 12, 2018, 03:16:10 PM
Post by: Nix on February 12, 2018, 03:21:10 PM
I'm a little bit weird. I find the way a tool (knife, pen, cast iron skillet, hammer, etc....) feels in my hand, makes a big difference in how much I enjoy using that tool or will even bother picking it up. I'm very tactile in that regard. In many ways, in forming my 'view' of a tool, my hands become my 'eyes'.
Great thoughts! And well stated, as always. :cheers:
Post by: VICMAN on February 12, 2018, 03:37:18 PM
I think you are spot-on El Peacent. Modern knives are designed for carrying, the Buck 110 is designed for using. World of difference, and it shows.
I'm a little bit weird. I find the way a tool (knife, pen, cast iron skillet, hammer, etc....) feels in my hand, makes a big difference in how much I enjoy using that tool or will even bother picking it up. I'm very tactile in that regard. In many ways, in forming my 'view' of a tool, my hands become my 'eyes'.
Great thoughts! And well stated, as always. :cheers:
I think the same way you do Nix as far as the feel of the knife in my hand. :like: :tu: :tu:
Post by: pomsbz on February 12, 2018, 04:17:16 PM
Oh and I hate clips. They have never, ever worked for me. Whether holster or sheath or knife. They either don't come out when you want them to or fall out when they are not supposed to. Give me a proper loop sheath any time.
Post by: Nix on February 12, 2018, 04:32:34 PM
Oh and I hate clips. They have never, ever worked for me. Whether holster or sheath or knife. They either don't come out when you want them to or fall out when they are not supposed to. Give me a proper loop sheath any time.
That gets you a great big hug! (http://www.pic4ever.com/images/s187.gif)
Post by: magentus on February 12, 2018, 04:37:57 PM
My MP400 is carried in a Leatherman leather belt sheath and my SAK is usually on a belt dangler into my pocket.
I'll get that hug now please Nix :D
Post by: Barry Rowland on February 12, 2018, 04:44:06 PM
Post by: Nix on February 12, 2018, 04:47:05 PM
(http://www.pic4ever.com/images/grouphug.gif)
(http://www.pic4ever.com/images/188.gif) "Bring back the handle! Bring back the handle!" (http://www.pic4ever.com/images/188.gif)
Post by: LoopCutter on February 12, 2018, 04:59:16 PM
Grew up in farming, rural area, several farm hands (full timers) had a fixed blade or 110 sheath carried.
Did not see any carried in town, accept if running for supplies not delivered.
Imagine west of the plains states maybe more frequent among ranch help.
Not EDCed by hunters when not hunting.
As for a challenge, a great idea, unfortunately I can not due to blade length restrictions I encounter at job sites and customers. 3-1/4” is typically the max for folder. I try to carry a 2-3/4” most.
Sent from my iPhone using Tapatalk
Post by: Nix on February 12, 2018, 05:21:45 PM
In my eyes, the 110 has always been a tool, this a work of art.
Grew up in farming, rural area, several farm hands (full timers) had a fixed blade or 110 sheath carried.
Did not see any carried in town, accept if running for supplies not delivered.
Imagine west of the plains states maybe more frequent among ranch help.
Not EDCed by hunters when not hunting.
As for a challenge, a great idea, unfortunately I can not due to blade length restrictions I encounter at job sites and customers. 3-1/4” is typically the max for folder. I try to carry a 2-3/4” most.
Agreed, LoopCutter.
Most of my 110 carry used to be when day-hiking or hunting. A smaller knife slipping into my pocket at the end of the day for smaller EDC uses. But I find the 110 so nice and comfortable, that it now gets carried on car-camping trips, motorcycle trips, and even as an EDC. Why not? ???
As for the challenge, I have a couple of ideas. One, quit your job and take up EDCing a 110. Two, if option one sounds too radical, perhaps you could carry a 110 during the challenge when lawful and practical. So, perhaps on weekends and after work. You could still post-up a picture and explain the limitations of carry for legal reasons. I think that is entirely in the spirit of a challenge, and would be instructional for others considering the Buck 110 Lifestyle (yes, we're making this a 'lifestyle' because that's what modern hipsters understand these days.) You could keep one stashed in the glove box for lunch breaks. So, no, you don't get a pass on this challenge. I'm signing you up.
(I used to work in a government facility and I mostly disregarded the knife rules. Would carry a 110, Spydie Military, or even a fixed blade for use at lunch, etc.... But, then, I was almost hoping to get fired at the time.)
Let's start the Buck 110 challenge Mar 15, of this year. :cheers:
So far we have:
Nix
VICMAN (yeah, you got signed up too)
Barry
Mechanickal (customs office not withstanding)
LoopCutter (press-ganged)
Spatan19 (you're in, right?)
Who else is in here?
We'll start a new thread on or about 15 March for the actually Challenge so as to not clutter up this thread and provide a focused forum for this Epic.
Post by: dks on February 12, 2018, 05:28:24 PM
Post by: Nix on February 12, 2018, 05:36:19 PM
Post by: dks on February 12, 2018, 05:37:47 PM
Post by: dks on February 12, 2018, 05:39:43 PM
https://www.bladeforums.com/threads/kill-bill-buck-knife-110-or-112.802704/
Post by: David on February 12, 2018, 05:42:46 PM
Post by: Nix on February 12, 2018, 05:43:04 PM
BF say it is an 112
Well, I'm inclined to agree.
So, does this mean you are joining the 30-day challenge....?
Post by: Nix on February 12, 2018, 05:44:50 PM
Now a days when I carry a Buck 110 its usually one of these two. A two dot 74-80 or a newer 09 model. The difference between the two is obvious.
Nice! This thread just keeps getting better.
:cheers:
Post by: David on February 12, 2018, 06:23:47 PM
Post by: VICMAN on February 12, 2018, 06:38:05 PM
Now a days when I carry a Buck 110 its usually one of these two. A two dot 74-80 or a newer 09 model. The difference between the two is obvious.Nice Bucks David! :like: :tu: :tu:
I have a 2 dot Buck 110 too. I like the difference in the hollow grind on the 2 dot ones.
Post by: VICMAN on February 12, 2018, 06:42:53 PM
In my eyes, the 110 has always been a tool, this a work of art.
Let's start the Buck 110 challenge Mar 15, of this year. :cheers:
So far we have:
Nix
VICMAN (yeah, you got signed up too)
Barry
Mechanickal (customs office not withstanding)
LoopCutter (press-ganged)
Spatan19 (you're in, right?)
Who else is in here?
We'll start a new thread on or about 15 March for the actually Challenge so as to not clutter up this thread and provide a focused forum for this Epic.
I agree about the 110 Nix.
I don't mind doing the challenge since I already carry a 110, but I don't have a smart phone, so taking pictures is a little more difficult for me.
Post by: Nix on February 12, 2018, 07:11:25 PM
Post by: LoopCutter on February 12, 2018, 08:26:02 PM
I will have to bury it deep in suit case if I am scheduled maintenance work at any military bases.
Our staff who handle those sites was retired Coast Guard and had the tats, they never inspected him or his truck, me, they just liked messing with me
Sent from my iPhone using Tapatalk
Post by: dks on February 12, 2018, 08:29:16 PM
They are all basically new and one is still in the box. I have had them for a few years.
The paperstone has thinner and cutout liners, but they are steel.
I never had the urge/desire to carry them but I like their look. The most likely to be carried will be the 112 paperstone.
Post by: VICMAN on February 12, 2018, 08:35:15 PM
4 here, 2 Regular 110's, 1 paperstone 110 and an 112 paperstone
The most likely to be carried will be the 112 paperstone.
Nice collection dks! :like: :tu: :tu:
Post by: Nix on February 13, 2018, 12:05:44 AM
Post by: LoopCutter on February 13, 2018, 02:14:28 AM
+10
Sent from my iPhone using Tapatalk
Post by: dks on February 13, 2018, 10:05:00 AM
Post by: ThePeacent on February 13, 2018, 03:44:47 PM
as the TV show progresses and seasons go by, Rick Grimes from the Walking dead abandons his assisted Gerber knives, his OHO folders and the waved Southern Grind he carries in favor of a 110
(https://i.imgur.com/pWeT3iu.png)
which has become his knife of choice in the post-apocalyptic earth.
He's survived so far, so I bet the decision is founded!! :ahhh
Buck 110 was the first to come, and the last one to go away
Post by: VICMAN on February 13, 2018, 06:12:20 PM
it goes to show, a knife to rely on...:like: :tu: :tu: :cheers:
Buck 110 was the first to come, and the last one to go away
Post by: this_is_nascar on February 14, 2018, 01:31:21 AM
Sent from my XT1635-01 using Tapatalk
Post by: Barry Rowland on February 14, 2018, 01:43:19 AM
Post by: Nix on February 14, 2018, 02:00:26 AM
For us 110 virgins, where do you suggest we purchase our first, to have our cherries popped?
That depends on your budget.
New: Walmart runs some specials where you can score a standard 420HC one for less than $40, maybe around $30. The internet's big river has the standard 420HC models for around $40. They also have several cool semi-custom options for a bit more. I bought an "Alaskan Guide" version from Cabela's once. This version has a black oxide blade coated blade made of S30V. This is a semi-custom Buck for less than $100. (Still have it, love it.) Or order exactly what you want from Buck's custom web site. That'll run a bit more and take a 4-5 weeks to get to you.
The custom knives from the Buck custom shop are really nice, with tighter tolerances and better overall fit & finish. Are they worth double to triple the cost of a stock 110? Tough call. I've yet to meet a 110 I didn't like. I had one standard 110 which had a little blade play and slop, but it was still a good user. A custom Buck will still cost less than many Benchmade or Spyderco knives, and definitely less than a Sebenza. And the Buck will out-cut a Sebenza every day (I say this as a happy Sebenza owner.). To me, a 110 fan, the custom Bucks seem like a relative bargain. But for a guy looking for a regular 110 for EDC, they're probably on the expensive side. It's almost impossible to beat the relative value of a 420HC Buck at the $40 price point.
Used: Pawn shops, EBay, Craig's List, antique stores.
Happy hunting!
Post by: Kampfer on February 14, 2018, 02:00:36 AM
Post by: LoopCutter on February 14, 2018, 03:42:09 AM
Walmart has it for under $30 out the door+1, the Walmart package is with a nylon style sheath.
I was at a Sports Academy in TerreHaute In and they had 110 w/leather sheath for same price.
You may be able to order Walmart online for the lowest price, with free s&h.
Sent from my iPhone using Tapatalk
Post by: VICMAN on February 14, 2018, 12:51:09 PM
Glad to hear you are interested in trying a 110 nascar!
Post by: dks on February 14, 2018, 01:05:46 PM
a. Less weight
b. You do not get the metallic smell on your hands from the brass.
Post by: this_is_nascar on February 14, 2018, 02:50:47 PM
Sent from my XT1635-01 using Tapatalk
Post by: pfrsantos on February 14, 2018, 06:17:24 PM
it goes to show, a knife to rely on...
as the TV show progresses and seasons go by, Rick Grimes from the Walking dead abandons his assisted Gerber knives, his OHO folders and the waved Southern Grind he carries in favor of a 110
(https://i.imgur.com/pWeT3iu.png)
which has become his knife of choice in the post-apocalyptic earth.
He's survived so far, so I bet the decision is founded!! :ahhh
Buck 110 was the first to come, and the last one to go away
Nice catch!
:salute: :salute:
When I see some of the "toy-knives" they use, it really looks like they're just trying to push some fancy-looking-not-for-hard-work knives. About time someone uses a real work horse.
:tu: :tu:
Post by: Aloha on February 14, 2018, 06:25:00 PM
Post by: Nix on February 14, 2018, 06:33:09 PM
Been eyeing the 5160 version recently. While the 420 Buck uses and built their reputation on is likely all I'll ever "need" I am really liking the 5160. Whats a virgin to do :facepalm: :rofl:
A difficult decision.
I love my 5160 Buck 110. Great edge....you know...it's 5160....
(https://i.imgur.com/Ua8QlVA.jpg)
Post by: Mechanickal on February 14, 2018, 06:33:13 PM
Is my name...
Doing on the challenge list?!
:shrug"
Post by: Nix on February 14, 2018, 06:37:53 PM
What the hell...
Is my name...
Doing on the challenge list?!
:shrug"
Well it sounded like you were going to get yerself a 110 and I just figured you'd want to try it out with a challenge. But I understand if delays or local laws limit your participation. Just do the best you can. :pok:
Hey, think we can get a 30-day Buck badge for this challenge? :think:
Post by: Mechanickal on February 14, 2018, 06:43:39 PM
If those guys at customs would start working instead of drinking coffee...What the hell...
Is my name...
Doing on the challenge list?!
:shrug"
Well it sounded like you were going to get yerself a 110 and I just figured you'd want to try it out with a challenge. But I understand if delays or local laws limit your participation. Just do the best you can. :pok:
Hey, think we can get a 30-day Buck badge for this challenge? :think:
Post by: zoidberg on February 15, 2018, 09:48:01 AM
Hey, think we can get a 30-day Buck badge for this challenge? :think:
I'm sure we could do that.
Note though that rules permitting, one can participate in multiple challenges but will only get the badge for one of them.
Post by: Nix on February 15, 2018, 04:23:59 PM
Hey, think we can get a 30-day Buck badge for this challenge? :think:
I'm sure we could do that.
Note though that rules permitting, one can participate in multiple challenges but will only get the badge for one of them.
Absolutely. I'm a one-knife per challenge kinda guy anyway. Earlier I said we should start a 110 challenge on the 15th of March, but it occurs to me that the current 30-day PX challenge won't finish up until 16 Mar. Perhaps we should start the 110 challenge on the 17th or 18th of March to allow people finishing up the PX challenge to join in on a Buck 110 challenge. You guys good with that?
Post by: VICMAN on February 15, 2018, 06:36:06 PM
Post by: SteveC on February 15, 2018, 06:47:47 PM
Post by: Nix on February 15, 2018, 07:34:11 PM
Maybe it would be a good time to get back on track and start the challenge at the 1st of the month like they used to ;)
Well, that would make some sense. 01 April?
:cheers:
Post by: VICMAN on February 15, 2018, 08:19:26 PM
Post by: Barry Rowland on February 16, 2018, 04:28:00 AM
Post by: sak60 on February 17, 2018, 02:09:31 AM
110 in 5160 would be a great combo.Been eyeing the 5160 version recently. While the 420 Buck uses and built their reputation on is likely all I'll ever "need" I am really liking the 5160. Whats a virgin to do :facepalm: :rofl:
A difficult decision.
I love my 5160 Buck 110. Great edge....you know...it's 5160....
(https://i.imgur.com/Ua8QlVA.jpg)
I considered it when I bought my two 74-80’s,
Now I’m thinking about it again, although I prefer the grind on the older blades personally.
Post by: zrxoa1 on March 31, 2018, 01:36:01 PM
May ask where in Indiana you are?,I live in Richmond.
My sister and brother-in-law have lived in Fort Wayne since 1980
Cool! While I have lived here in Georgetown, KY since 2006, I’m from Connersville, Indiana. Go back there every so often to visit the mothers...(mine and my wife’s...)
Might have to meet up for a drink sometime!
Sent from my iPhone using Tapatalk
Post by: ThundahBeagle on April 01, 2018, 04:40:19 PM
This post took me back a few years, to when I was a kid that wanted one badly but couldn't raise the money for one and had a cheap Pakistani lookalike for a brief period of time. Well....my son (Spartan 19) has one and it's riding alongside my GAK at the moment on my belt. Tomorrow I'm going to have my own! :D :D :D
Barry, we must've come up at about the same time. In the early 80's I got my hands on one of those Pakistani knock-offs as well. Even before I ever handled a Buck 110, I thought the Pakistani version seemed either rickety or stiff - and that was different parts of the same knife.
Wanted a Buck 110 or 112 for a long time.
In the early to mid 90's, I found and settled on a Japanese made Browning model 810 folding locker. It is a black composite handle with Rosewood inlay. Nice knife, for sure, and it's done well for me in my light use of it, but I still get that tugging feeling when I see a Buck 110. I'll break down and get one someday
Post by: ThundahBeagle on April 01, 2018, 05:07:12 PM
Comparing this to the fixed blade, lightweight injection molded handle Jaakari Puukko that is being offered in the GAW, the Puukko is 175 grams to Buck's 205 (someone earlier in the thread weighed it).
And what if the Puukko came with a more traditional material handle? Probably would be very close in weight. I want that Puukko but I'm guessing the Buck in its sheath would be more acceptable in polite company than the Puukko in its sheath...
The thing is...the 110 is a knife that was designed for the purpose of being used as a hunting tool smaller and lighter than a typical hunting knife. Those tactical knives are designed as weapons first.
Not everything has to be tactical. It drives me bananas the number of folks who insist on tactical while pushing a stroller through the mall, but that's just me.
Post by: Barry Rowland on April 05, 2018, 03:12:55 PM
+1 on the whole tactical thing! I love shiny chrome and brass!
Post by: ThundahBeagle on April 09, 2018, 11:34:06 PM
Not tactical. Just strong yet lightweight. It'd be great for hiking and camping
Post by: VICMAN on April 09, 2018, 11:43:33 PM
Picked one up today, as I reported in other posts. Classic yet not classic. I got a year 2011 new old stock forest green Ecolite Paperstone version. Intensely sharp out of the box. Incredibly light yet as far as I can tell, rugged. And did I mention sharp? Wicked shaahhp.
Not tactical. Just strong yet lightweight. It'd be great for hiking and camping
:like: :tu: :tu:
Post by: Barry Rowland on April 10, 2018, 06:57:07 AM
Post by: ThundahBeagle on April 11, 2018, 02:41:45 AM
Anyone have one of those yet?
Post by: Nix on April 11, 2018, 03:39:55 AM
And I doubt I will. I like the standard 110 so much, I don't think I'd be tempted by anything else.
Post by: ThundahBeagle on April 11, 2018, 04:39:14 AM
The decision took a while: do I buy the standard, which is the classic that I came for, or do I pick up this sort of odd duck that is no longer produced and both is and isn't a 110 as I knew it.
So while I didn't come away with something that Ive been wanting, I came away with something of similar quality, same brand, but is not often seen. Not quite unique, but something that puts me in a smaller club.
I like it so far, this Paperstone version. I could see why someone would pick up the LT. It's just over 3 ounces - even lighter than the paperstone.
Post by: Nix on April 11, 2018, 04:57:23 AM
But it's the classic 110 with brass bolsters that wins my heart. Nothing rational about that. Just a preference. :tu:
Post by: ThundahBeagle on April 11, 2018, 05:25:17 AM
Hey, I've got a Paperstone like yours, and it fills a role for me. Smart move grabbing one while you can.
But it's the classic 110 with brass bolsters that wins my heart. Nothing rational about that. Just a preference. :tu:
I only had $ for one, so I grabbed the scarce one. I will be paying a return visit for a classic as well, since that's still what I really want. I believe it is rational. The want for quality.
Post by: Nix on April 11, 2018, 05:39:40 AM
Post by: VICMAN on April 11, 2018, 11:07:51 AM
I only had $ for one, so I grabbed the scarce one. I will be paying a return visit for a classic as well, since that's still what I really want. I believe it is rational. The want for quality.
I think you did the right thing getting the scarce one first....the Classic will still be available when you go back, but you might not find another Paperstone 110. :cheers: :cheers:
Post by: Gerhard Gerber on April 11, 2018, 11:32:30 AM
Not surprising because we were effectively a province of the old South Africa which was under international sanctions. Thank you Germany for the Pumas :salute:
Did not know Buck existed until relatively few years ago, but I still have a connection with the 110......
Some of my "better" folding knives were (Pakistani I believe) knock-offs of the 110, in various sizes and even very alternative shapes but with the basic back lock recipe.
Post by: VICMAN on April 11, 2018, 03:29:21 PM
Growing up all I can remember for sale locally was Puma, and crap.
Not surprising because we were effectively a province of the old South Africa which was under international sanctions. Thank you Germany for the Pumas :salute:
Did not know Buck existed until relatively few years ago, but I still have a connection with the 110......
Some of my "better" folding knives were (Pakistani I believe) knock-offs of the 110, in various sizes and even very alternative shapes but with the basic back lock recipe.
Hopefully, you will someday get to handle and use a Buck 110 to experience the quality of materials and workmanship and the edge retention compared to the Pakistani versions.
Thanks for following this thread with us Gerhard! :cheers:
Post by: ThePeacent on April 11, 2018, 03:37:20 PM
Growing up all I can remember for sale locally was Puma, and crap.
Not surprising because we were effectively a province of the old South Africa which was under international sanctions. Thank you Germany for the Pumas :salute:
Did not know Buck existed until relatively few years ago, but I still have a connection with the 110......
Some of my "better" folding knives were (Pakistani I believe) knock-offs of the 110, in various sizes and even very alternative shapes but with the basic back lock recipe.
I had a few PUMA knives back then, and they were the best quality folders I had for years (other than SAKs) :tu:
I had a big, heavy Buck 110 knockoff that also had a saw (just 2 blades in the entire thing) and probably weighed 8-9 oz. Solid as a tank, uncomfortable as a brick, I don't have it yet and I don't remember if it was a PUMA, probably was, but it was very sturdy and well built, an alternative to the lack of Buck products in my country too :salute:
Post by: Gerhard Gerber on April 13, 2018, 08:49:41 AM
Hopefully, you will someday get to handle and use a Buck 110 to experience the quality of materials and workmanship and the edge retention compared to the Pakistani versions.
Well I have a very nice Puma from the 90's, can't remember how/why but it's the only knife from my childhood collection that wasn't stolen.
I've handled 110's in the mean time, and they are available, but honestly I'm unlikely to buy one since that would be purely for collecting purposes......users only from here on.
But thank you for this thread, thinking back to those days is a kick, I was wondering about the knives my friends had back then....only to realise I was the knife kid :rofl:
Post by: jalind on April 13, 2018, 11:25:41 AM
Trivia:
I noted the slightly smaller cousin, the 112 Ranger, in the collection. There's a back story about how that model came to be. As already mentioned, the 110 had become immensely popular during with service members during the Vietnam War. Seems a couple sailors got into a fight and one of them used a 110 Hunter. During the ensuing investigation and disciplinary action, the ship's captain discovered how many sailors were carrying Buck 110's around, and that made him nervous about repeat incidents. To force the sailors in his command to get rid of them, he exercise his prerogative as a commanding officer and banned all knives with blades longer than three inches. Of course, word of a local command policy like that makes its way around and other commanding officer's started implementing the same ban. As I understand it, this never became a service wide policy, simply local command. As a commanding officer I had a few of my own regarding other matter (knives were not a problem in any of my commands). Buck reacted to this by creating the 112 Ranger with its three inch blade length that would pass the three inch blade test and AFAIK it's been in their catalog ever since. The three inch limit apparently exists in a number of legal jurisdictions and no doubt has been a contributor to its longevity.
John
Post by: VICMAN on April 13, 2018, 07:59:59 PM
Well I have a very nice Puma from the 90's, can't remember how/why but it's the only knife from my childhood collection that wasn't stolen.
I've handled 110's in the mean time, and they are available, but honestly I'm unlikely to buy one since that would be purely for collecting purposes......users only from here on.
But thank you for this thread, thinking back to those days is a kick, I was wondering about the knives my friends had back then....only to realise I was the knife kid :rofl:
The Puma is a nice knife Gerhard! :like: :tu: :tu:
Thank you for following this thread. :cheers:
Post by: VICMAN on April 13, 2018, 08:01:53 PM
Buck reacted to this by creating the 112 Ranger with its three inch blade length that would pass the three inch blade test and AFAIK it's been in their catalog ever since. The three inch limit apparently exists in a number of legal jurisdictions and no doubt has been a contributor to its longevity.
John
Nice trivia on the Buck 110 John.
Thanks for sharing. :like: :tu: :tu:
Post by: Nix on April 13, 2018, 08:58:42 PM
I noted the slightly smaller cousin, the 112 Ranger, in the collection. There's a back story about how that model came to be. As already mentioned, the 110 had become immensely popular during with service members during the Vietnam War. Seems a couple sailors got into a fight and one of them used a 110 Hunter. During the ensuing investigation and disciplinary action, the ship's captain discovered how many sailors were carrying Buck 110's around, and that made him nervous about repeat incidents. To force the sailors in his command to get rid of them, he exercise his prerogative as a commanding officer and banned all knives with blades longer than three inches. Of course, word of a local command policy like that makes its way around and other commanding officer's started implementing the same ban. As I understand it, this never became a service wide policy, simply local command. As a commanding officer I had a few of my own regarding other matter (knives were not a problem in any of my commands). Buck reacted to this by creating the 112 Ranger with its three inch blade length that would pass the three inch blade test and AFAIK it's been in their catalog ever since. The three inch limit apparently exists in a number of legal jurisdictions and no doubt has been a contributor to its longevity.
I had heard the same story. So maybe it's true. Anyway, it's a good enough story that we shouldn't let it fall into disuse. :D
I've got a Buck 112 and find it to be a fantastic knife for EDC. Kinda heavy for it weight to blade length, but, like the 110, the 112 is just so much fun to use, the extra few ounces are worth it.
Post by: Barry Rowland on April 20, 2018, 02:27:11 AM
Post by: David on August 21, 2018, 04:34:49 AM
Post by: VICMAN on August 21, 2018, 11:16:15 AM
Smoke Jumper
Nice pics David! :like: :tu: :tu:
Post by: LoopCutter on August 22, 2018, 02:13:41 AM
Can you share the date code on the blade, I could not enlarge clear enough to determine. TIA.
Post by: David on August 22, 2018, 04:17:49 AM
@David - thank you sharing these pictures. It appears identical to the 110 LT but red.
Can you share the date code on the blade, I could not enlarge clear enough to determine. TIA.
Here ya go.
Post by: LoopCutter on August 22, 2018, 02:34:05 PM
Post by: VICMAN on August 22, 2018, 02:48:04 PM
Thanks again. The blade is new stamped 2018. Never saw this model listed for sale, may have been a special run for a group or retailer?
Here is a URL where you can get one LoopCutter. :D
It has a CPM 154 blade.
https://www.skblades.com/product-page/the-smoke-jumper
Post by: zrxoa1 on August 22, 2018, 02:57:51 PM
Sent from my iPhone using Tapatalk
Post by: David on August 22, 2018, 05:43:57 PM
Post by: LoopCutter on August 24, 2018, 04:42:55 AM
Thanks, was not aware of SKBlades being a source of special Bucks. He has some nice unique designs. Now subscribed to his site!Thanks again. The blade is new stamped 2018. Never saw this model listed for sale, may have been a special run for a group or retailer?
Here is a URL where you can get one LoopCutter. :D
It has a CPM 154 blade.
https://www.skblades.com/product-page/the-smoke-jumper
I will attempt avoid the temptation for a RED 110 LT style knife.
I like to use my knives, and really would like to wait for a 112 LT. Rumors are soon...
I have two, so I have need for more.
Post by: G-Dizzle on August 27, 2018, 07:23:27 PM
Post by: Nix on August 27, 2018, 08:51:34 PM
I really dig the 112. Cool little knife in a big package.
Post by: BertnErnie on August 28, 2018, 04:30:19 AM
Post by: VICMAN on August 28, 2018, 12:14:25 PM
Love this thread. A 110 is in my carry rotation and a 112 will be soon!
Thanks gdoolittle!
The 112 is also a great knife! :cheers:
Post by: VICMAN on August 28, 2018, 12:18:54 PM
That is just a magnificent collection. Nice!
Thanks BertnErnie! :cheers:
Post by: Kampfer on October 09, 2018, 10:11:40 PM
I love it because it is such classic but hate it for its weight and size.
Now, may I present you my first Buck 110.
S30V blade, dual thumb studs, pocket clip on G10 linerless scale.
8mm thick, weight at 3.0 oz, production date Sept 28th, 2018.
(https://forum.multitool.org/index.php?action=dlattach;topic=75832.0;attach=400493;image)
Post by: Fuzzbucket on October 09, 2018, 10:21:25 PM
Post by: Nix on October 09, 2018, 10:42:22 PM
Glad you found a 110 that will work for you. :tu:
Post by: VICMAN on October 09, 2018, 11:07:33 PM
I always loved and hated the Buck 110.
I love it because it is such classic but hate it for its weight and size.
Now, may I present you my first Buck 110.
S30V blade, dual thumb studs, pocket clip on G10 linerless scale.
8mm thick, weight at 3.0 oz, production date Sept 28th, 2018.
Nice Buck 110 Kampfer! :like: :tu: :tu:
Post by: Spartan19 on October 09, 2018, 11:44:54 PM
Post by: Barry Rowland on October 10, 2018, 02:27:13 AM
Post by: toolguy on October 10, 2018, 02:37:42 AM
I looked at those last week.Buck has a new generation of light weight 110's and 112's they're now releasing.
Here are a few light weight 110's.From the top.
Aluminum Limited Production
Paperstone
Nylon:Smoke Jumper CPM154,Drop Point
Titanium #560.
Post by: Spartan19 on October 10, 2018, 03:33:40 AM
Nice ones guys!!
Much obliged! :hatsoff:
Post by: Barry Rowland on October 10, 2018, 07:45:04 AM
Post by: LoopCutter on October 10, 2018, 02:24:22 PM
Great buy Kampfer.
I looked at those last week.Buck has a new generation of light weight 110's and 112's they're now releasing.
~
Yes, Buck did release the 112 LT and other variants like the 110 models.
I could not hold back and ordered a couple 112 LTs and found my 20% discount ode to Buck when I registered my email a year or more ago was still good. Free shipping and no sales tax made the pair very reasonable.
Then found the thin light weights like Kampfer's with the anvil cut out clip at a online site. "Very nice!" maybe an understatement.
Now may order a 110 and 112, OH my this site is killing my wallet. :whistle:
Post by: Kampfer on October 11, 2018, 01:18:39 AM
(https://forum.multitool.org/index.php?action=dlattach;topic=75832.0;attach=400846;image)
Post by: Barry Rowland on October 11, 2018, 01:36:49 AM
jealous yet? Now with new pocket clip.
(https://forum.multitool.org/index.php?action=dlattach;topic=75832.0;attach=400846;image)
Post by: ThePeacent on October 11, 2018, 01:59:29 PM
jealous yet? Now with new pocket clip.
(https://forum.multitool.org/index.php?action=dlattach;topic=75832.0;attach=400846;image)
looks much cleaner :hatsoff:
Post by: zrxoa1 on October 11, 2018, 02:23:15 PM
I always loved and hated the Buck 110.
I love it because it is such classic but hate it for its weight and size.
Now, may I present you my first Buck 110.
S30V blade, dual thumb studs, pocket clip on G10 linerless scale.
8mm thick, weight at 3.0 oz, production date Sept 28th, 2018.
(https://forum.multitool.org/index.php?action=dlattach;topic=75832.0;attach=400493;image)
Where did that come from? Can’t find it on Bucks website...
Sent from my iPhone using Tapatalk
Post by: toolguy on October 11, 2018, 03:19:30 PM
Where did that come from? Can’t find it on Bucks website...
https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR10.TRC2.A0.H0.Xbuck+110+slim.TRS2&_nkw=buck+110+slim&_sacat=0
Post by: ThePeacent on October 11, 2018, 03:43:59 PM
I always loved and hated the Buck 110.Where did that come from? Can’t find it on Bucks website...
I love it because it is such classic but hate it for its weight and size.
Now, may I present you my first Buck 110.
S30V blade, dual thumb studs, pocket clip on G10 linerless scale.
8mm thick, weight at 3.0 oz, production date Sept 28th, 2018.
(https://forum.multitool.org/index.php?action=dlattach;topic=75832.0;attach=400493;image)
Sent from my iPhone using Tapatalk
Well you have the new 110 Lightweight, 112 Lightweight :tu:
the 110 and 112 SLIM and SLIM PRO (S30V) with G10 scales, :cheers:
the new drop point 110 in 20CV Steel :angel:
and the Smoke Jumper 110 in 154CM Steel :gimme:
as well as a new 112 Auto :o
all these new in the last 3 months :drink:
https://www.knifecenter.com/kc_new/store_store.html?brand=164&utm_source=website&utm_medium=brandspages&utm_campaign=Buck+Knives&sortType=dateDe
Post by: toolguy on October 11, 2018, 06:44:28 PM
Post by: shark_za on October 11, 2018, 09:11:26 PM
Guess I am going to be ordering quite a few Buck knives in the near future.
I want a 112 and 110 in G10/S30V as well as a few 112 LW's and maybe a few slims in cool colors for my kids.
Post by: zrxoa1 on October 11, 2018, 09:29:13 PM
I’d be up for a 112 Auto if it had a nice pocket clip. That is once the price comes down. The current price is way too high for me!!
Sent from my iPhone using Tapatalk
Post by: toolguy on October 11, 2018, 11:06:06 PM
I've only had these for a few minutes and I couldn't help but notice the much tighter lock-up than the LT's.
These are the new "Slim" 110 and 112.
Post by: VICMAN on October 11, 2018, 11:54:40 PM
These two just arrived.I wanted a color that was more visible than the dark colors of the past.
I've only had these for a few minutes and I couldn't help but notice the much tighter lock-up than the LT's.
These are the new "Thin" 110 and 112.
Nice duo toolguy! :like: :tu: :tu:
Post by: zrxoa1 on October 12, 2018, 01:22:44 AM
Sent from my iPhone using Tapatalk
Post by: zrxoa1 on October 12, 2018, 01:23:25 AM
These two just arrived.I wanted a color that was more visible than the dark colors of the past.
I've only had these for a few minutes and I couldn't help but notice the much tighter lock-up than the LT's.
These are the new "Slim" 110 and 112.
By the way, VERY nice!!!! Congrats!!!!
Sent from my iPhone using Tapatalk
Post by: LoopCutter on October 12, 2018, 01:42:01 AM
Who does Buck make those for? They are not on Buck’s website...I saw these at Copper and Clad a week ago, right after my 112 LTs arrived from Buck directly. http://copperandclad.com/buck-knives/folding-knives/?sort=featured&page=2
Sent from my iPhone using Tapatalk
I not sure if the SLIM model is for me. But do like the different colors, but the RED Micarta has me a wanting :drool:
Post by: toolguy on October 12, 2018, 01:47:37 AM
Who does Buck make those for? They are not on Buck’s website...
Buck wanted to make sure their dealers were stocked before they placed them on their own website.
This is one of their dealers.
https://copperandclad.com/
Post by: toolguy on October 12, 2018, 01:49:03 AM
Nice duo toolguy! :like: :tu: :tu:
Thanks Vman.
Post by: David on October 12, 2018, 03:14:06 AM
These two just arrived.I wanted a color that was more visible than the dark colors of the past.
I've only had these for a few minutes and I couldn't help but notice the much tighter lock-up than the LT's.
These are the new "Thin" 110 and 112.
Nice duo toolguy! :like: :tu: :tu:
:iagree:
Post by: sak60 on October 13, 2018, 03:45:42 AM
Post by: Barry Rowland on October 13, 2018, 02:43:17 PM
Post by: toolguy on October 15, 2018, 09:07:23 PM
:iagree:These two just arrived.I wanted a color that was more visible than the dark colors of the past.Nice duo toolguy! :like: :tu: :tu:
I've only had these for a few minutes and I couldn't help but notice the much tighter lock-up than the LT's.
These are the new "Thin" 110 and 112.
:iagree: +1
:iagree: +2
Thank you one and all.
Post by: Barry Rowland on November 17, 2018, 05:25:19 AM
Post by: SteveC on November 17, 2018, 05:51:09 AM
Post by: VICMAN on November 17, 2018, 02:47:30 PM
Noah has really awakened my love for, and interest in, Buck knives. Pictured I'd my beloved 110 next to an early '90's 119 that belonged to my late uncle. He was also my best friend growing up, and we chased many a rabbit thru the old farm fields. With the exception of a Barlow, all he ever owned and carried was 119's. I know he would have loved the 110. Like the SAKs, I'm continuously amazed at how versatile the big Bucks are.
Great pics Barry! :like: :tu: :tu:
I love the story behind the 119. Knives with family background are my favorites. They bring back such great memories! :D
Post by: Barry Rowland on November 17, 2018, 04:18:27 PM
Post by: Barry Rowland on November 17, 2018, 04:19:13 PM
:like:
Post by: Nix on November 17, 2018, 04:21:59 PM
Noah has really awakened my love for, and interest in, Buck knives. Pictured I'd my beloved 110 next to an early '90's 119 that belonged to my late uncle. He was also my best friend growing up, and we chased many a rabbit thru the old farm fields. With the exception of a Barlow, all he ever owned and carried was 119's. I know he would have loved the 110. Like the SAKs, I'm continuously amazed at how versatile the big Bucks are.
:like:
A Buck makes a great tool and companion. :tu:
Post by: Barry Rowland on November 17, 2018, 04:26:18 PM
Post by: Kampfer on November 30, 2018, 10:20:38 PM
So I modded, much more comfortable now.
(https://forum.multitool.org/index.php?action=dlattach;topic=75832.0;attach=410170;image)
(https://forum.multitool.org/index.php?action=dlattach;topic=75832.0;attach=410174;image)
(https://forum.multitool.org/index.php?action=dlattach;topic=75832.0;attach=410172;image)
(https://forum.multitool.org/index.php?action=dlattach;topic=75832.0;attach=410176;image)
Post by: Barry Rowland on December 01, 2018, 03:22:29 AM
Post by: VICMAN on December 01, 2018, 04:33:51 AM
The standard sheath is ridding too high on the belt for my liking.
So I modded, much more comfortable now.
Nice mod Kampfer! :like: :tu: :tu:
Post by: ThePeacent on December 01, 2018, 01:24:12 PM
Post by: nmpops on December 01, 2018, 08:30:57 PM
Post by: Kampfer on December 01, 2018, 09:25:17 PM
Nice sheath mod, you should make an open topped one out of leather too,I am sure it can be done if i ever decide to carry a full size 110.
Post by: Aloha on December 10, 2018, 04:08:00 AM
I am really bummed I didn't take before pictures so you can see the work I put into it. I didn't want to take all the character away just give it a good cleaning and light polish. Its a gorgeous specimen if I do say so.
The sheath was dry and nasty. I don't know if its original but its nice. I cleaned with saddle soap then heated it up lightly and used my beeswax mix I recently made up. This sheath really drank in the mixture. Its nice and supple now. I'll give it one more coating over night and call it good.
The knife was wiped with brass cleaner, the blade was lightly wiped with 0000 steel wool and mothers mag wheel polish. There are a few pitted areas that give this blade some character. I took a damp cloth to wipe down the ebony slabs. I then treated the wood to my beeswax mixture.
I spent some time on my Lansky getting a lot of the chips out. Like I said there are a few more but I dont want to change the profile too much. I'd have to take away quite a bit steel to get them out. For now I'm happy. No Buck spa treatment for me as I don't want too much done.
Thanks for looking.
Post by: Aloha on December 10, 2018, 04:10:16 AM
Post by: Aloha on December 10, 2018, 04:11:52 AM
Post by: David on December 10, 2018, 04:38:17 AM
Last pic. The pitting or missing metal give the blade some nice character. I almost sanded it flush but I'm glad I stopped when I did on this knife.
Good score A7! :like: Looks like a late 70's 110. :tu:
Post by: Nix on December 10, 2018, 04:38:35 AM
I don't know what it used to look like, but it's sweeeeeet lookin' now.
Good choice, and good job!
I'm going with three (3) 'like' emojis because that ol' gem has some character.
:like: :like: :like:
Post by: Aloha on December 10, 2018, 04:42:18 AM
Post by: zrxoa1 on December 10, 2018, 04:58:44 AM
Sent from my iPhone using Tapatalk
Post by: Aloha on December 10, 2018, 05:13:20 AM
The sheath was nasty. The blade had tape, glue, or something really stuck on it. The bolsters had some pretty gnarly "patina". The wood was also very sticky. I think he was thinking I was the sucker. :rofl:. I enjoy the process so its part of the buying experience for me. I just wished I would have taken pics. I got home, took care of a few things, then got right into it.
Anyway, a long ramble just to say, I totally agree with you :tu:
Post by: SteveC on December 10, 2018, 05:45:17 AM
Post by: Aloha on December 10, 2018, 06:22:19 AM
Post by: ThundahBeagle on December 10, 2018, 07:56:30 AM
It looks great!
You have inspired me to try the same, but I haven't got an old Buck, my 3 are all 2011 - 2017.
Post by: zoidberg on December 10, 2018, 08:55:15 AM
I've finally joined the 110 ownership group.
Looks great mate. :tu: :like:
Post by: Barry Rowland on December 10, 2018, 11:47:29 AM
Post by: VICMAN on December 10, 2018, 12:53:40 PM
I've finally joined the 110 ownership group. I had one a while back but pops took it from me. I got this 1978-79 ( dated using BFs ) in really rough condition. I spent about 3 hours getting it to this condition. The worst is still needing to be addressed. Lots of chips on the blades edge. I will address it at a later time. The knife will push cut paper and shave albeit it get hung up on the remaining chips.
Nice find Aloha! :like: :tu: :tu:
Post by: LoopCutter on December 10, 2018, 02:24:36 PM
Rescuing a old or neglected knife has much satisfaction. I would do the same with 70s and 80s bicycles, then give them to kids in the neighborhood who needed a larger frame, or were interested in drop handle road bikes for riding the pathways nearby.
Your Buck will likely tell tales of neglect and abuse if it could talk. A knife rescue for sure. And now a new devoted friend at your side that will be at the ready with a SHARP lookout.
4 thumbs up from me - :tu: :tu: :tu: :tu:
Post by: Aloha on December 10, 2018, 02:45:09 PM
Post by: David on December 10, 2018, 07:59:03 PM
Post by: Aloha on December 11, 2018, 03:28:59 PM
Post by: Barry Rowland on December 12, 2018, 05:24:49 PM
:tu: awesome pic. Carried mine yesterday and it was like 1980s all over again. Something familiar in a good way.
Post by: Aloha on December 12, 2018, 05:34:13 PM
Post by: Aloha on December 19, 2018, 03:24:53 PM
Post by: Barry Rowland on December 19, 2018, 03:31:07 PM
Post by: Nix on December 19, 2018, 04:02:14 PM
Great version of the 110.
My wife used and abused it for a while. At one point, it was looking pretty bad. Dull, dull, dull. Grit in the action.
But that Blackhorse is easy to disassemble, clean, lube, and reassemble. An hour of work got it looking good and razor sharp!
Post by: Aloha on December 19, 2018, 04:10:09 PM
Post by: Nix on December 19, 2018, 04:52:25 PM
Ride on!
Post by: VICMAN on December 19, 2018, 06:42:50 PM
Still very much enjoying the nostalgia of the 110. I have a Kershaw Blackhorse from the 80s thats a neat interpretation.
Nice pics Aloha! :like: :tu: :tu:
Here is my Kershaw Blackhorse with a 1980-'81 Buck 110.
This particular Buck 110 was the first Buck 110 I bought.
Click on pictures for best picture
Post by: Aloha on December 19, 2018, 07:04:24 PM
I really like the looks and performance of a clip point. Kershaw IMO did a really great job with theirs. They certainly had a great blueprint to follow as did others.
On a side note. I've never quite appreciated these old folders. I certainly never appreciated the Buck 110. I have you to thank for starting this thread and all those who have participated in it. It wasn't long ago that I didn't have a Buck 110 looking back at this thread. I wanted a older one even tho the newer steels Buck now offers got me excited.
I will look a little closer at the Bucks I see at the flea market and be more aggressive in trying to get another. I don't mind the work to get it useable. I just dont like those with blades that are as thin as fillet knives.
Just a few more thoughts. I cleaned mine up to a point. I didn't want to send it in and get it looking "new". I appreciate the patina this knife has and want to retain it. Its appears partly honest wear with some neglect. What excited me was the age. Like I said, looking at all the available dating information online I date this at 1978. 40 years strong. I'm happy with use and carry time the patina has returned. My cleaning was not overly done so the brass is back to its gorgeousness. I appreciate the weight. I carried a Surge and Swisschamp so heavy tools are not something I shied away from. In its sheath and on my belt its present without being cumbersome.
I am also not shying away from using it like it was meant. This knife has done quite a bit under my custodianship. With Bucks forever warranty I'm sure this knife will see another 40 years. Retire? It would be a shame so off to work it goes with me.
Post by: Nix on December 19, 2018, 07:16:49 PM
However, I migrated to Buck 110's because I like the slimmer handle. The Blackhorse's finger grooves are really good, but I just came to prefer the Buck's ergo.
Like you, Aloha, I don't mind the weight of the Buck's brass bolsters. In fact, I like it. I like the way the balance point is shifted back in the hand.
Post by: Nix on December 19, 2018, 07:46:38 PM
(https://i.imgur.com/1z1cppd.jpg)
Post by: Aloha on December 19, 2018, 07:49:34 PM
Post by: Nix on December 19, 2018, 07:52:23 PM
Post by: VICMAN on December 19, 2018, 08:53:17 PM
My Kershaw is about the same vintage as yours. Mines the Japan version 1 from all I gathered. My Buck 100 is 78' if I've dated it correctly. We've got darn near mirrored images of each other :tu:
I really like the looks and performance of a clip point. Kershaw IMO did a really great job with theirs. They certainly had a great blueprint to follow as did others.
On a side note. I've never quite appreciated these old folders. I certainly never appreciated the Buck 110. I have you to thank for starting this thread and all those who have participated in it. It wasn't long ago that I didn't have a Buck 110 looking back at this thread. I wanted a older one even tho the newer steels Buck now offers got me excited.
I will look a little closer at the Bucks I see at the flea market and be more aggressive in trying to get another. I don't mind the work to get it useable. I just dont like those with blades that are as thin as fillet knives.
Just a few more thoughts. I cleaned mine up to a point. I didn't want to send it in and get it looking "new". I appreciate the patina this knife has and want to retain it. Its appears partly honest wear with some neglect. What excited me was the age. Like I said, looking at all the available dating information online I date this at 1978. 40 years strong. I'm happy with use and carry time the patina has returned. My cleaning was not overly done so the brass is back to its gorgeousness. I appreciate the weight. I carried a Surge and Swisschamp so heavy tools are not something I shied away from. In its sheath and on my belt its present without being cumbersome.
I am also not shying away from using it like it was meant. This knife has done quite a bit under my custodianship. With Bucks forever warranty I'm sure this knife will see another 40 years. Retire? It would be a shame so off to work it goes with me.
Glad to hear I helped you to appreciate the Buck 110. :D
You found a nice one. It, like the one in my pictures, has a 440C blade which does hold a great edge.
Glad to hear you are using it...that is what it was made for and it is the only way you can really come to appreciate what a great knife the Buck 110 is.
Also, like you, I appreciate the weight. It just has a solid feel that inspires confidence when using it. :cheers:
Post by: VICMAN on December 19, 2018, 08:54:26 PM
Today's 110:
Great pic Nix! :like: :tu: :tu:
Post by: VICMAN on December 19, 2018, 08:58:31 PM
:)
Nice pic David! :like: :tu: :tu:
Post by: Aloha on December 21, 2018, 04:27:29 PM
Post by: Nix on December 21, 2018, 04:35:16 PM
Pure enjoyment. This knife has ignited something. I am really liking carrying it more than I thought I would. I figured it would be a day or five and on to my normal carry.
Couldn't agree more. It's a fun knife that kindles enjoyment. And confidence with that nice heft and the solid 'chunk' sound of the blade locking up. I find it to be such a comfortable knife to use...so well suited for such a great range of tasks.
I'm stoked that you've picked one up and are enjoying it! :2tu:
Post by: VICMAN on December 21, 2018, 06:28:54 PM
Pure enjoyment. This knife has ignited something. I am really liking carrying it more than I thought I would. I figured it would be a day or five and on to my normal carry.
:like: :cheers: :cheers:
Post by: LoopCutter on December 21, 2018, 07:28:53 PM
I see a possible movie in the works, "Aloha007 Rescue" :facepalm:
Makes me feel guilty using my newer model or even my LT model. I need to hit the garage sales and flea market tables :think: :salute: :ahhh
Post by: Nix on December 21, 2018, 09:07:00 PM
Post by: LoopCutter on December 21, 2018, 11:33:01 PM
The 110 with bolsters is a great knife, and a design unchanged for years with a multitude of scale options and finish's.
The LT is the same blade, lock back, in a nylon handle without liners. To me it is better than most under $40 knives. It is sharp, and easy to maintain, lighter and easy to fit a lanyard onto it for easy retrieval from a pocket.
Buck has introduced a slimmer version with a pocket clip and and thumb stud, yet still criticized.
I like all my Bucks, mainly due to the lock back design.
Post by: Nix on December 21, 2018, 11:49:14 PM
Post by: Barry Rowland on December 22, 2018, 02:23:56 AM
Post by: VICMAN on December 22, 2018, 06:23:30 PM
I love the heft of good old fashioned brass, wood and steel! :tu:
I agree Barry! :cheers:
Here are pictures of my oldest and favorite Buck 110. It is a1974-1980 model with a 440C blade.
Click on pictures for best picture
Post by: Nix on December 22, 2018, 06:24:25 PM
Post by: VICMAN on December 22, 2018, 07:15:28 PM
Sweeeeet! :like:
Thanks Nix! :cheers:
Post by: Kampfer on December 22, 2018, 11:19:06 PM
It rusts daily. :think:
Out of all my knives in different SS the buck S30V is the only one that ever rust in high and dry California weather.
WTH.
Post by: Nix on December 23, 2018, 12:27:45 AM
S30V is not a true "stainless" steel, but it seems to be fairly corrosion resistant. I've got a few Buck 110's in S30V and have never seen an inclination of rust. I'm almost disappointed as I'd like to see a few develop a little patina with use.
Makes me wonder if you have a genuine Buck.
Then again, I'm not familiar with the new slim 110's. Maybe they are doing something different with the S30V in those knives? Anybody else having that issue?
Post by: VICMAN on December 23, 2018, 12:38:47 AM
I also have Chris Reeve Sebenzas, Spydercos, and a Lone Wolf with S30V blades and none of them have shown any signs of rusting.
It is possible with anything to get an occasional one that is not quite up to par and it sounds like you may have gotten one like that.
Post by: Fuzzbucket on December 23, 2018, 12:45:38 AM
I have 8 Buck 110's with S30V blades and none of them have shown any signs of rust.
I also have Chris Reeve Sebenzas, Spydercos, and a Lone Wolf with S30V blades and none of them have shown any signs of rusting.
It is possible with anything to get an occasional one that is not quite up to par and it sounds like you may have gotten one like that.
:iagree: with both V'man and Nix, I've never seen any signs of corrosion on S30V ever! It's a very shiney silver looking steel - it's got quite a slippy quality to it, of that makes sense... as Nix has already said, are you positive it's S30V?
Post by: zrxoa1 on December 23, 2018, 07:34:48 AM
(https://uploads.tapatalk-cdn.com/20181223/4a2f4c354d0011cb49f7ed7d51074444.jpg)
I love the knife but it is just too big to drop into my pocket and pocket clips are frowned upon at work, unless I find a way to make it so it won’t scratch the cars.
Thinking about the 112 Slim with G10 handles, but at the going price, I could grab a Benchmade Mini Griptilian!!! They are darn near bulletproof from what I’ve read.
I already have the Buck 110 Classic and 110 LT. Not sure if I should go for the 112 Slim/G10 or the Benchmade Mini Griptilian???
Sent from my iPhone using Tapatalk
Post by: VICMAN on December 23, 2018, 02:54:33 PM
Had my 110 LT in my pocket tonight. Used it to cut my Hoagie in half...
Good use of the 110LT zrxoa1! :cheers:
Post by: ThePeacent on December 23, 2018, 04:13:35 PM
I have 8 Buck 110's with S30V blades and none of them have shown any signs of rust.
I also have Chris Reeve Sebenzas, Spydercos, and a Lone Wolf with S30V blades and none of them have shown any signs of rusting.
It is possible with anything to get an occasional one that is not quite up to par and it sounds like you may have gotten one like that.
:iagree: too
I have a tendency to rust knives -thus my use of the Salts in H1 as daily users-, but since Nix gifted me this awesome 110 in S30V :) I've carried it often even at the Garden and among hoses, water and humidity and it hasn't rusted or pitted a bit.
The scales/bolsters patina'd in less than a week and are very tarnished but the blade has remained pristine in regards to corrosion
(https://i.imgur.com/nDlWRq5.jpg)
Carrying it today in fact. Thanks Nix!! :hatsoff: :tu:
Post by: Nix on December 23, 2018, 05:00:44 PM
Post by: ThePeacent on December 23, 2018, 05:43:52 PM
That 110 is looking great, El P! :tu:
the patina is uniquely beautiful on that brass :cheers:
Post by: Nix on December 23, 2018, 06:02:55 PM
Post by: Kampfer on December 23, 2018, 08:46:26 PM
I guess I got a lemon.
Post by: Nix on December 23, 2018, 08:53:19 PM
I know all about how stainless S30V should be, and I am damn sure mine is the real deal, I got it in October before it was even released publicly.
I guess I got a lemon.
:think: Send it back to Buck? :dunno:
Post by: SteveC on December 23, 2018, 08:53:48 PM
Post by: VICMAN on December 23, 2018, 11:08:45 PM
I know all about how stainless S30V should be, and I am damn sure mine is the real deal, I got it in October before it was even released publicly.
I guess I got a lemon.
I agree with Nix and Steve that you should contact Buck.
Post by: Kampfer on December 24, 2018, 12:53:17 AM
Post by: Nix on December 24, 2018, 12:56:26 AM
Post by: Nix on December 24, 2018, 12:57:07 AM
Post by: Barry Rowland on December 24, 2018, 03:52:23 AM
Sweeeeet! :like:
Post by: Barry Rowland on December 24, 2018, 03:56:03 AM
Post by: Nix on December 24, 2018, 03:56:51 AM
Post by: Barry Rowland on December 24, 2018, 04:02:03 AM
Post by: VICMAN on December 24, 2018, 12:56:13 PM
I just cleaned it up, next time it rust I am going to send a pic to Buck.
Good idea Kampfer!
Post by: VICMAN on December 24, 2018, 12:56:41 PM
It's been too long. Mine is going out with me tomorrow!
:like: :tu: :tu:
Post by: Wspeed on December 24, 2018, 01:57:26 PM
But I will keep a eye out with my new 110
If anything happens I will let you all know :tu:
Here is a pic of my new 110 :dd:
It’s so nice to have the 110 back in my life :woohoo:
And all thanks to Fuzzy :cheers:
Post by: Fuzzbucket on December 24, 2018, 02:15:13 PM
I never had any problems with rust on my old 110 :think:
But I will keep a eye out with my new 110
If anything happens I will let you all know :tu:
Here is a pic of my new 110 :dd:
It’s so nice to have the 110 back in my life :woohoo:
And all thanks to Fuzzy :cheers:
smurf me, that looks good! :tu:
Post by: SteveC on December 24, 2018, 02:15:35 PM
Post by: Wspeed on December 24, 2018, 02:18:15 PM
Post by: Nix on December 24, 2018, 03:12:37 PM
Post by: Wspeed on December 24, 2018, 03:32:23 PM
Post by: David on December 24, 2018, 03:53:45 PM
It's been too long. Mine is going out with me tomorrow!
Saddled up and ready to ride! :tu: :like:
Post by: David on December 24, 2018, 03:56:02 PM
I never had any problems with rust on my old 110 :think:
But I will keep a eye out with my new 110
If anything happens I will let you all know :tu:
Here is a pic of my new 110 :dd:
It’s so nice to have the 110 back in my life :woohoo:
And all thanks to Fuzzy :cheers:
Really nice pic of the 110! :like:
Post by: Wspeed on December 24, 2018, 04:26:22 PM
Post by: VICMAN on December 24, 2018, 04:30:26 PM
Here is a pic of my new 110 :dd:
It’s so nice to have the 110 back in my life :woohoo:
And all thanks to Fuzzy :cheers:
Great pic Wspeed! :like: :tu: :tu:
Post by: Wspeed on December 24, 2018, 04:32:35 PM
Post by: Aloha on December 24, 2018, 04:45:37 PM
I just cleaned it up, next time it rust I am going to send a pic to Buck.
You should most certainly send it back to Buck. I have a Spyderco Native in S30V that has "patina" on the blade. I scrubbed the blade with steel wool and cleaners but its still has "patina". Not sure what the previous owner did but I was bummed. I was unimpressed at first thinking that S30V should not behave this way. Shortly after my initial attempt to restore the blade to "factory" fresh I gave up on it. Figured I got a lemon or fake. Then I remembered my Swisstool that I got used at the flea market. There was some rusting and blemishes on it.
I let it go and enjoyed the knife as I still do. Kam I'd send it back and not think on it a moment longer. Hope it all works out for you.
Post by: toolguy on December 24, 2018, 06:29:02 PM
Congrats to all of the owners.
Here is a quick pic of some of my Stag/Damascus Bucks.There is also one jigged bone Damascus.
I took better pics outside.
Post by: Nix on December 24, 2018, 06:30:53 PM
Post by: Wspeed on December 24, 2018, 07:06:04 PM
Post by: toolguy on December 24, 2018, 07:35:34 PM
Very nice collection toolguy :tu: :like:
Love those stag scales! :tu:
Thanks fellow Buckers.
Merry Christmas!
Post by: Wspeed on December 24, 2018, 07:45:12 PM
Post by: toolguy on December 24, 2018, 07:48:44 PM
Have you got a favourite one toolguy :think: :tu:
A favorite from these Stag/Dams or a favorite 110?
Post by: Wspeed on December 24, 2018, 08:13:13 PM
Sorry I was asking about the Stag/Dams :tu: :like:Have you got a favourite one toolguy :think: :tu:
A favorite from these Stag/Dams or a favorite 110?
Post by: magentus on December 24, 2018, 08:18:58 PM
Post by: Wspeed on December 24, 2018, 08:22:09 PM
Post by: Fuzzbucket on December 24, 2018, 08:22:32 PM
Post by: Wspeed on December 24, 2018, 08:23:49 PM
Post by: Kampfer on December 24, 2018, 08:25:38 PM
Expensive ($90+), poor F&F (Scales and lockbar don't line up), rough action (blade on G10 scales, no washers), ugly pocket clip, rust (WTH??).
I bought it to support Buck's direction on modernizing the legendary 110 but I am deeply regret it.
Post by: toolguy on December 24, 2018, 08:30:35 PM
Sorry I was asking about the Stag/Dams :tu: :like:Have you got a favourite one toolguy :think: :tu:
A favorite from these Stag/Dams or a favorite 110?
No,I actually don't have a favorite.
The unique features of both Sambar Stag and Damascus blades,makes choosing a favorite not only difficult but simply a matter of preference.
Thanks for asking.
Post by: Wspeed on December 24, 2018, 08:33:26 PM
Thanks for replying :cheers: :like:Sorry I was asking about the Stag/Dams :tu: :like:Have you got a favourite one toolguy :think: :tu:
A favorite from these Stag/Dams or a favorite 110?
No,I actually don't have a favorite.
The unique features of both Sambar Stag and Damascus blades,makes choosing a favorite not only difficult but simply a matter of preference.
Thanks for asking.
Post by: VICMAN on December 24, 2018, 09:05:55 PM
There are a lot of nice Bucks posted here.
Congrats to all of the owners.
Here is a quick pic of some of my Stag/Damascus Bucks.There is also one jigged bone Damascus.
I took better pics outside.
Nice collection of Stag/Damascus Bucks toolguy! :like: :tu: :tu:
Post by: VICMAN on December 24, 2018, 09:07:17 PM
Buck 110 Slim Pro in S30V is shaping up to be my worst knife purchase of 2018
Expensive ($90+), poor F&F (Scales and lockbar don't line up), rough action (blade on G10 scales, no washers), ugly pocket clip, rust (WTH??).
I bought it to support Buck's direction on modernizing the legendary 110 but I am deeply regret it.
I would definitely ask Buck to exchange it for another one.
Post by: Aloha on December 24, 2018, 09:09:16 PM
Post by: Aloha on December 24, 2018, 09:10:33 PM
Buck 110 Slim Pro in S30V is shaping up to be my worst knife purchase of 2018
Expensive ($90+), poor F&F (Scales and lockbar don't line up), rough action (blade on G10 scales, no washers), ugly pocket clip, rust (WTH??).
I bought it to support Buck's direction on modernizing the legendary 110 but I am deeply regret it.
I would definitely ask Buck to exchange it for another one.
:iagree:
Kam dont wait any longer. Send it back with all your issues. Put Bucks warranty to the test. Sure hope this is a isolated issue.
Post by: zrxoa1 on December 24, 2018, 09:25:54 PM
Buck 110 Slim Pro in S30V is shaping up to be my worst knife purchase of 2018
Expensive ($90+), poor F&F (Scales and lockbar don't line up), rough action (blade on G10 scales, no washers), ugly pocket clip, rust (WTH??).
I bought it to support Buck's direction on modernizing the legendary 110 but I am deeply regret it.
You’re helping me to make my decision!! I was looking at either the 112 Slim in G10 or a Benchmade Mini Griptilian. Looking more like the Benchmade for me.
Don’t get me wrong, love my 110s!! Have a classic and 2 LTs.
I agree with the others, send that sucker back. You said you got it early, maybe a preproduction model. Replace it and if second is as bad, then move on.
Sent from my iPhone using Tapatalk
Post by: Aloha on December 24, 2018, 09:42:33 PM
Kam maybe they weren't quite ready for the masses? I am not giving them an excuse but let them attempt to make it right.
Post by: Barry Rowland on December 24, 2018, 09:56:07 PM
Good to see you and that sweet Buck here, WSpeed! :like: :tu:
Post by: VICMAN on December 24, 2018, 10:07:56 PM
You said you got it early, maybe a preproduction model. Replace it and if second is as bad, then move on.
That is an excellent observation zrxoa1!
Post by: Wspeed on December 24, 2018, 10:54:01 PM
:iagree:Thanks BR :cheers: :like:Good to see you and that sweet Buck here, WSpeed! :like: :tu:
Post by: Aloha on December 29, 2018, 05:49:23 PM
Post by: Barry Rowland on December 29, 2018, 05:51:00 PM
Post by: zrxoa1 on December 29, 2018, 05:54:24 PM
Sent from my iPhone using Tapatalk
Post by: Wspeed on December 29, 2018, 05:58:45 PM
Still going strong.Very nice :tu: :like:
How old is that 110 Aloha :think:
Post by: Wspeed on December 29, 2018, 06:01:11 PM
Post by: toolguy on December 29, 2018, 06:04:20 PM
WOW those Bucks are :drool: TOOLGUY.Nice collection of Stag/Damascus Bucks toolguy! :like: :tu: :tu:
Thank you gentlemen,
Happy New Year.
Post by: NKlamerus on December 29, 2018, 06:06:33 PM
It's light, cheap, sharp, but a tad bit small. (https://uploads.tapatalk-cdn.com/20181229/b6697e8acbdb6e557f87a702e44ff444.jpg)
Post by: Wspeed on December 29, 2018, 06:09:33 PM
Post by: toolguy on December 29, 2018, 06:18:29 PM
Feels good to be in the "Buck" club even though it's not a 110, first time I've carried a knife over a Leatherman in YEARS. My father always carried a 110 or Case XX. Switched to a Boker Automatic a few years ago.
It's light, cheap, sharp, but a tad bit small. (https://uploads.tapatalk-cdn.com/20181229/b6697e8acbdb6e557f87a702e44ff444.jpg)
Congrats.
Their price is so low you could now buy the larger version.
I'm only here to help.LOL
Post by: NKlamerus on December 29, 2018, 06:21:42 PM
Dang I totally didn't see the larger version!!?Feels good to be in the "Buck" club even though it's not a 110, first time I've carried a knife over a Leatherman in YEARS. My father always carried a 110 or Case XX. Switched to a Boker Automatic a few years ago.
It's light, cheap, sharp, but a tad bit small. (https://uploads.tapatalk-cdn.com/20181229/b6697e8acbdb6e557f87a702e44ff444.jpg)
Congrats.
Their price is so low you could now buy the larger version.
I'm only here to help.LOL
Post by: Wspeed on December 29, 2018, 06:22:31 PM
Post by: VICMAN on December 29, 2018, 09:17:10 PM
Still going strong.
Nice trio Aloha! :like: :tu: :tu:
Post by: VICMAN on December 29, 2018, 09:17:45 PM
My 110 :dd: :like:
Nice pic Wspeed! :like: :tu: :tu:
Post by: VICMAN on December 29, 2018, 09:19:37 PM
Feels good to be in the "Buck" club even though it's not a 110, first time I've carried a knife over a Leatherman in YEARS. My father always carried a 110 or Case XX. Switched to a Boker Automatic a few years ago.
It's light, cheap, sharp, but a tad bit small.
Congratulations on the new Buck NKlamerus! :like: :tu: :tu:
Post by: VICMAN on December 29, 2018, 09:21:58 PM
Congrats.
Their price is so low you could now buy the larger version.
I'm only here to help.LOL
Nice pic toolguy! :like: :tu: :tu:
Post by: Aloha on December 29, 2018, 09:29:36 PM
Still going strong.Very nice :tu: :like:
How old is that 110 Aloha :think:
1978-79'
Post by: Aloha on December 29, 2018, 09:30:02 PM
My 110 :dd: :like:
Awesome picture.
Post by: Aloha on December 29, 2018, 09:30:49 PM
:like: :tu:
Thank you. Its been great carrying it.
Post by: Nix on December 29, 2018, 09:31:17 PM
Dang I totally didn't see the larger version!!?
No worries, the 112 is a great knife! :tu:
Post by: Aloha on December 29, 2018, 09:32:24 PM
Still going strong.
Nice trio Aloha! :like: :tu: :tu:
I always forget about my Juice for around the house carry. Its a bit more plier than my Squirt.
Post by: Wspeed on December 29, 2018, 09:33:44 PM
Thanks VICMAN :cheers: :like:My 110 :dd: :like:
Nice pic Wspeed! :like: :tu: :tu:
Post by: Wspeed on December 29, 2018, 09:34:11 PM
Thanks Aloha :cheers: :like:My 110 :dd: :like:
Awesome picture.
Post by: Wspeed on December 29, 2018, 09:35:41 PM
Thanks Aloha :cheers: :like:Still going strong.Very nice :tu: :like:
How old is that 110 Aloha :think:
1978-79'
Your 110 still looks in very good condition :tu:
Post by: Aloha on December 29, 2018, 09:54:25 PM
Thanks Aloha :cheers: :like:Still going strong.Very nice :tu: :like:
How old is that 110 Aloha :think:
1978-79'
Your 110 still looks in very good condition :tu:
Lock up is tight, blade wasn't broken, which I always tend to see on many 110s. I wished I would have taken before pics tho as it was in need of some TLC. I do have a 2 chips in the edge that I need to remedy but its super sharp and I just need the time to get my whetstones together.
Post by: Wspeed on December 29, 2018, 10:00:53 PM
Shame about the chips I hope you can remove themThanks Aloha :cheers: :like:Still going strong.Very nice :tu: :like:
How old is that 110 Aloha :think:
1978-79'
Your 110 still looks in very good condition :tu:
Lock up is tight, blade wasn't broken, which I always tend to see on many 110s. I wished I would have taken before pics tho as it was in need of some TLC. I do have a 2 chips in the edge that I need to remedy but its super sharp and I just need the time to get my whetstones together.
But then for a knife that old that is not bad :tu: :like:
Post by: Aloha on December 29, 2018, 10:38:09 PM
Post by: Wspeed on December 29, 2018, 11:08:55 PM
I believe they will come out no problem. I just hesitate to remove steel when the edge is overall really nice. Just cut down some boxes for the recycle bin with no issues. No hang ups or anything. Its a beast of a blade.If they don’t give you any problems
Than I would leave the blade alone :tu:
Post by: superpaco on December 29, 2018, 11:32:15 PM
I thought it'd be interesting to do a little comparison of the weight of some of my big folders. I know the 110 is considered a 'heavy' knife, but that weight just doesn't seem to get my attention. Just how much heavier is the Buck 110 than other knives? :think:
Here's a fairly standard 110 with wood scales and brass bolsters, weighed out on my kitchen scale:
(https://i.imgur.com/IqDXyF3.jpg)
For the metrically challenged that's about 7.25 ounces (A bit shy of 1/2 pound). Not a feather-weight at all.
dks mentioned the Paperstone variant of the 110. Let's check out the "tale of the tape":
(https://i.imgur.com/xntzjCj.jpg)
Wow! Just 55% of the brass-lined 110's weight.
Here's the thing, for me, the handle of the Paperstone is just not as comfortable and the standard 110. The cut-outs are in odd places and create sharp edges that dig into the hand. Not a knife for extended use. I've considered giving this knife away....but then I've taken it on some hikes and canoe and kayak trips where I thought a lighter knife might be handy. So, for now, it stays in the rotation.
The Spyderco PM2 would seem to be a comparable knife to the 110. Similar handle length, slightly shorter blade. How does that stack up?
(https://i.imgur.com/qqN4X59.jpg)
Note: this is the way I carry this PM2, no clip, string lanyard. I was surprised that it came in so close to the Paperstone, it actually feels a bit heavier. Like the Paperstone, the handle of the PM2 just isn't as comfortable to me as the standard 110's handle is. I think they sacrificed comfort for a slimmer handle. That's my assessment, not the truth.
The Buck 110 has inspired many different knives and variations. This next one, Lakota Prohawk, is slightly smaller than a 110, but has an awesome clip blade. Steel bolsters, but it borrows the Buck's brass liners
(https://i.imgur.com/cL9xf1e.jpg)
So pretty darn close to the weight of a 110. This knife also rides nicely in a belt sheath, but there's no way I'd pocket carry it. The geometry is too awkward.
Lastly, I thought I'd compare the 110 to a large 'modern' Benchmade. The Contego is a bit larger than the Buck, so it isn't a completely fair comparison, but I don't see many people complain about the weight of the Contego.
(https://i.imgur.com/ybYNytg.jpg)
Surprised again! I figured the Contego would weigh in around 180-190 grams. Still, the Contego is designed to be worn in the pocket, using one of those annoying pocket clips (Mine still has it's clip on). So all that weight is pulling on your pants, not your belt. Maybe I should make a belt sheath for it and lose the clip. Hmmmm..... :think: The difference in weight between the Buck 110 and the mighty Contego is only 41 grams.
(https://i.imgur.com/SW1MGcD.jpg)
That's $1.06 in pocket change.
Interesting results, for me at least. Nothing Earth-shaking. And I'm certainly not going to let the weight of a little pocket change stop me from carrying one of the world's great folding knives.
Science and logic for the win. Nicely done, sir!
Post by: Nix on December 30, 2018, 01:05:52 AM
Post by: NKlamerus on January 03, 2019, 06:18:52 AM
Do you have any photos of the 112/110 open next to eachother?Feels good to be in the "Buck" club even though it's not a 110, first time I've carried a knife over a Leatherman in YEARS. My father always carried a 110 or Case XX. Switched to a Boker Automatic a few years ago.
It's light, cheap, sharp, but a tad bit small. (https://uploads.tapatalk-cdn.com/20181229/b6697e8acbdb6e557f87a702e44ff444.jpg)
Congrats.
Their price is so low you could now buy the larger version.
I'm only here to help.LOL
Wishing I would have gone 110.........
Post by: VICMAN on January 03, 2019, 03:22:56 PM
Do you have any photos of the 112/110 open next to eachother?
Wishing I would have gone 110.........
Here is a picture of a standard Buck 110 and a Buck 112'
Click on picture for best picture
Post by: Wspeed on January 03, 2019, 03:30:24 PM
Post by: David on January 03, 2019, 03:34:01 PM
Do you have any photos of the 112/110 open next to eachother?
Wishing I would have gone 110.........
Here is a picture of a standard Buck 110 and a Buck 112'
Click on picture for best picture
:tu: :like:
Post by: Barry Rowland on January 03, 2019, 03:54:53 PM
Post by: Aloha on January 03, 2019, 04:18:57 PM
Post by: Aloha on January 03, 2019, 04:26:18 PM
Do you have any photos of the 112/110 open next to eachother?
Wishing I would have gone 110.........
I've come the really appreciate the 110 if you haven't already noticed. I've carried it on my belt now since getting it. Its just a neat knife. The 112 certainly looks to be a sweet blade too. I've never had on in hand tho I've looked for them. Just like my 110 I'm sure I'll come upon one eventually. Good luck on deciding if you'll get a 110 or 112 or the MTO way and get both.........
Post by: Wspeed on January 03, 2019, 04:33:38 PM
Not sure if I would want the smaller size 112 :think:
It really depends on what size
you would be happy with NKlamerus :tu:
Post by: VICMAN on January 03, 2019, 05:45:55 PM
Nice Buck knives VICMAN :tu: :like:
Thank you Wspeed! :cheers:
Post by: VICMAN on January 03, 2019, 05:47:22 PM
Here is a picture of a standard Buck 110 and a Buck 112'
Click on picture for best picture
:tu: :like:
Thanks David! :cheers:
Post by: VICMAN on January 03, 2019, 05:47:54 PM
Nice comparison pic VICMAN.
Thanks Aloha! :cheers:
Post by: VICMAN on January 03, 2019, 05:50:39 PM
Post by: Aloha on January 03, 2019, 06:02:58 PM
Post by: Wspeed on January 03, 2019, 06:05:47 PM
Post by: VICMAN on January 03, 2019, 06:16:37 PM
Great video Aloha! :like: :tu: :tu:
Post by: SteveC on January 03, 2019, 06:17:59 PM
Post by: Kampfer on January 06, 2019, 09:34:36 AM
Quote from: Kampfer
Hi there,
I purchased a 110 slim pro with G10 scale and S30V steel in last October. I feel there is something wrong with its steel heat treat.
It is soft, tonight I found a small nick on the blade edge just from cutting up an apple; it is easy to rust, if I don't clean and dry it after every use I will find rust spots on the blade next morning.
Please tell me if there is something you can help me with these issues.
Thanks.
Kampfer
Post by: zrxoa1 on January 06, 2019, 09:49:45 AM
Sent from my iPhone using Tapatalk
Post by: Kampfer on January 06, 2019, 09:58:29 AM
Post by: zrxoa1 on January 06, 2019, 10:18:36 AM
I am looking for an exchange so I can give this knife a second chance, don't think I am asking too much.
Not at all!!! I hope Buck does right and takes care if you!!
Sent from my iPhone using Tapatalk
Post by: Wspeed on January 06, 2019, 12:43:24 PM
Post by: VICMAN on January 06, 2019, 01:30:18 PM
I am looking for an exchange so I can give this knife a second chance, don't think I am asking too much.
I agree that Buck should replace it with another one. Hope they take care of it quickly.
Post by: ThundahBeagle on January 07, 2019, 06:40:16 AM
Last pic. The pitting or missing metal give the blade some nice character. I almost sanded it flush but I'm glad I stopped when I did on this knife.
Not to "steel" Aloha's "thundah"...
But over this past summer I received a gift from Spartan19 - a nice shiny brand new Buck 110. I love it, it is a great blade!
However, over the last couple of months or so, I have seen an old Buck 110 two dot paired with an old Western number 062 for sale on local Craigslist. I finally squeezed the trigger on the pair.
The Buck is a two dot with squared angles, so it looks to be 1974 - 1980. Don't know if I can date it more accurately than that. Maybe someone else can?
I've already dated the Western to 1978, but that'll be a different posting.
Aloha, I like what you've done with yours, and did the same with my newly acquired, but oldest Buck today. Even sharpened it a bit...here are some pics...
Oops. Pic sizing still an issue. I'll get them up asap
Post by: ThundahBeagle on January 07, 2019, 06:44:27 AM
Post by: ThundahBeagle on January 07, 2019, 06:45:11 AM
Post by: ThundahBeagle on January 07, 2019, 06:46:49 AM
Post by: ThundahBeagle on January 07, 2019, 06:55:15 AM
Second I cleaned up the wood a bit with some Murphy's Oil Soap.
Next I polished up the brass with Brasso. Used it on the blade as well.
Oiled it up with some 3 in One oil and worked the blade. This thing had snap this afternoon when I bought it, and even more when I was done for the night.
Then I sharpened up the blade a bit using my Smith's multi- step system, similar to Lansky's, where the blade is put in a vise with wings on it, through which the stones can be run at specific angles.
Finally I used Frye Boots leather conditioner and worked it into the sheath, leaving it to sit and dry.
Great knife. The squared corners fill the hand just a bit more substantially and the old school sheaths really do ride about three finger widths lower because the belt loop is actually a loop on the top end.
I have been watching this Craigslist ad for months. Thanks for the inspiration to finally just do it, today, Aloha!
Post by: zrxoa1 on January 07, 2019, 07:10:37 AM
Sent from my iPhone using Tapatalk
Post by: ThundahBeagle on January 07, 2019, 07:30:57 AM
Post by: Barry Rowland on January 07, 2019, 02:13:20 PM
Post by: Aloha on January 07, 2019, 03:39:43 PM
As to more accurately dating yours. There is a lot of information floating around but to simplify I lean towards this particular dating process. There is likely leeway within the manufacturing process so absolute accuracy would be difficult on these older ones.
The wood cover has brass pins and 1 stainless pin ( lock bar pin ).
2 small brass pins 1 ss pin 1974-75.
4 brass pins and 1 ss pin 1976
3 small brass pins 1 ss pin 1977
3 "larger" brass pins 1 ss pin 1978-79 ( mine )
Post by: ThundahBeagle on January 07, 2019, 06:07:14 PM
Its aclassicicon in the knife world. I'm glad you finally picked it up. The one you have has 440HC blade and solid macassar ebony wood. I'm glad you just cleaned up the knife and sharpened the blade. You could have sent it in to Buck and still can for a spa treatment. I chose to only go so far because I really enjoy the life this 110 lived.
As to more accurately dating yours. There is a lot of information floating around but to simplify I lean towards this particular dating process. There is likely leeway within the manufacturing process so absolute accuracy would be difficult on these older ones.
The wood cover has brass pins and 1 stainless pin ( lock bar pin ).
2 small brass pins 1 ss pin 1974-75.
4 brass pins and 1 ss pin 1976
3 small brass pins 1 ss pin 1977
3 "larger" brass pins 1 ss pin 1978-79 ( mine )
Thanks for that, Aloha.
I suppose, depending on the size of my brass pins, this seems to put me in the 1977 or later camp. Since the brass ones seem smaller than the stainless one, I am guessing 77 on the money? Later, I'll get a better look at the pin sizes and see if that's true or if I'm really a 78 to 80.
Either way, between Star Wars and the Empire Strikes Back, the banana seat bikes, and kicka$$ Chevy Blazers, and Evel Kneival finally all healed up from jumping the Grand Canyon a few years before that, it was a great time!
Post by: Barry Rowland on January 07, 2019, 06:08:28 PM
Post by: Nix on January 07, 2019, 06:16:34 PM
Post by: Aloha on January 07, 2019, 06:17:57 PM
Right on buddy!!
:iagree:
Post by: LoopCutter on January 07, 2019, 07:23:37 PM
Post by: VICMAN on January 07, 2019, 08:03:05 PM
110 two-dot
Great find ThundahBeagle! :like: :tu: :tu:
Here are pictures of my 110 two-dot
Click on pictures for best picture
Post by: David on January 07, 2019, 08:07:04 PM
110 two-dot
Great find ThundahBeagle! :like: :tu: :tu:
Here are pictures of my 110 two-dot
Click on pictures for best picture
8) :like:
Post by: VICMAN on January 07, 2019, 08:20:29 PM
8) :like:
Thanks David! :cheers:
Post by: Wspeed on January 07, 2019, 08:22:05 PM
Post by: VICMAN on January 07, 2019, 08:42:36 PM
Nice looking 110s ThundahBeagle and VICMAN :tu: :like:
Thanks Wspeed! :cheers:
Post by: ThundahBeagle on January 08, 2019, 03:58:42 PM
After another look at the brass scale pins, I'm of the opinion that mine is like Vic'so and Aloha'so - a nice 1978/79. Probably a 78 because that's the date code on the Western model 062 (B), and as I understand it, the pIr belonged to one man, who lost a poker game.
Very nice pics, Vic. Nice color on the Bolsters. The brasso cleaned the tarnish off of mine, but you seem to have polished those up nicely
Post by: ThundahBeagle on January 08, 2019, 04:07:03 PM
Post by: VICMAN on January 08, 2019, 06:18:15 PM
Very nice pics, Vic. Nice color on the Bolsters. The brasso cleaned the tarnish off of mine, but you seem to have polished those up nicely
Thanks ThundahBeagle! :cheers:
I just used some Turtle Wax light to medium white polishing compound on mine.
Your 110 appears to be the same year as the one I have. It is my oldest Buck 110. :D
Post by: Aloha on January 08, 2019, 08:11:04 PM
Thank you ZRX, Barry, and Aloha, whose similar process made me decide to spruce this one up myself rather than send it out to Buck, which was always a nice option to have in the back pocket
:salute:
Post by: Barry Rowland on January 08, 2019, 10:51:03 PM
Post by: Spartan19 on January 10, 2019, 03:19:27 AM
Thank you ZRX, Barry, and Aloha, whose similar process made me decide to spruce this one up myself rather than send it out to Buck, which was always a nice option to have in the back pocket
Right on brother! :like:
Post by: LoopCutter on January 18, 2019, 07:42:29 PM
She appeared very skilled with her knife.
Post by: Kampfer on January 18, 2019, 09:08:06 PM
Post by: Barry Rowland on January 18, 2019, 09:13:04 PM
Post by: VICMAN on January 18, 2019, 09:41:01 PM
Sent my 110 slim pro to buck for warranty, let's see in six weeks.
Hope they replace it Kampfer. :cheers:
Post by: VICMAN on January 18, 2019, 09:43:19 PM
My wife and I enjoy watching "The Last Alaskans" on Discovery via my Fire Stick.
Sounds like a cool show LoopCutter! :cheers:
Post by: eTripper on January 19, 2019, 12:42:29 AM
(https://i.imgur.com/6j6HyYDl.jpg?1)
(https://i.imgur.com/2sgTqFSl.jpg)
(https://i.imgur.com/03TX27ml.jpg)
(https://i.imgur.com/XBm6OZql.jpg)
(https://i.imgur.com/dTwWoWsl.jpg)
(https://i.imgur.com/G1U5u8Rl.jpg)
(https://i.imgur.com/Fp5uuCal.jpg)
The result speaks for itself, does it not? Hard to believe, that this blade is over forty-years old! Truly, an iconic classic.
Post by: eTripper on January 19, 2019, 01:01:48 AM
(https://i.imgur.com/rBewJJvl.jpg?2)
(https://i.imgur.com/f9SWLNql.jpg?2)
Post by: Nix on January 19, 2019, 01:14:48 AM
And now that it's legal, I think you need an auto 110..... :pok:
Post by: eTripper on January 19, 2019, 01:27:20 AM
That's a cool looking folder, Trip. :like:
And now that it's legal, I think you need an auto 110..... :pok:
I don't know, Nix. I might have to! :D
(https://cdn3.volusion.com/vxwmp.hlcwz/v/vspfiles/photos/Buck-110-A20179G10-2.jpg?1536229133)
Post by: Nix on January 19, 2019, 01:28:25 AM
Post by: eTripper on January 19, 2019, 01:34:28 AM
(https://images-na.ssl-images-amazon.com/images/I/41vXF%2BxCvXL._SX425_.jpg)
Post by: Nix on January 19, 2019, 01:35:42 AM
Post by: Barry Rowland on January 19, 2019, 01:36:36 AM
Post by: eTripper on January 19, 2019, 02:52:24 AM
eTripper your old knife looks fantastic!!
Thanks, Barry. I appreciate the kudos. Quality never really goes out of style does it? :hatsoff:
Post by: Barry Rowland on January 19, 2019, 04:05:34 AM
Post by: ThundahBeagle on January 19, 2019, 06:58:05 AM
I've been a member of the 'Buck 110' Club since around 1975. It was my first, quality-knife/big-folder purchase. As the years went by, better options presented themselves. Yet, this one has remained in my stable of folders. Just found-it again in my 'knife box', and decided to clean-it up.
(https://i.imgur.com/6j6HyYDl.jpg?1)
(https://i.imgur.com/2sgTqFSl.jpg)
(https://i.imgur.com/03TX27ml.jpg)
(https://i.imgur.com/XBm6OZql.jpg)
(https://i.imgur.com/dTwWoWsl.jpg)
(https://i.imgur.com/G1U5u8Rl.jpg)
(https://i.imgur.com/Fp5uuCal.jpg)
The result speaks for itself, does it not? Hard to believe, that this blade is over forty-years old! Truly, an iconic classic.
Very nice knife eTrip! Well done on the cleanup and restoration! Amazing job shining those bolsters. You can see reflection of the date code in them!
Is it possible that this particular knife was maybe your second quality Buck purchase? Or that you made it a little later than thought? Or perhaps you had sent it in to Buck for repair?
The date code on the blade tang and the handle pins are 1980 the earliest. No less a great knife!
Interesting sheath, too. Can you post pics of the back, belt loop side?
Post by: eTripper on January 19, 2019, 09:02:43 AM
Post by: Wspeed on January 19, 2019, 12:33:47 PM
Post by: VICMAN on January 19, 2019, 01:04:03 PM
Just found-it again in my 'knife box', and decided to clean-it up.[/b]
The result speaks for itself, does it not? Hard to believe, that this blade is over forty-years old! Truly, an iconic classic.
Very nice eTripper! :like: :tu: :tu:
Post by: VICMAN on January 19, 2019, 01:05:28 PM
Buck continues to be a vibrant cutlery concern. Their cross-pollination of products with other brands, seems to work well especially, with tactical outfits like TOPs.
Great pics eTripper! :like: :tu: :tu:
Post by: ThundahBeagle on January 19, 2019, 03:58:51 PM
You could very-well be correct, TB. I may have given my first one away, and replaced-it with this one. I know, that the sheath in not the 'original' for this product. I'll try to get a pick of the back of the sheath for you.
A testament to your generosity if you gave it away, sir.
You've got a beautiful example there, really well done on the knife.
I find the really older sheaths tend to have a high loop that allows the sheath to carry much lower off your belt. The bran new ones are a strip of leather sewn flat against the back of the sheath, and it carries higher.
I'm curious if that change was cold turkey or if there is some sort of slow transition with a different middle ground sort of layout
Thanks eTripper! Nice knife
Post by: LoopCutter on January 19, 2019, 03:59:28 PM
Plus I enjoyed your other pictures as well, the "tacticool" style is new to me, now to avoid the itch to search for ...
Post by: Aloha on January 19, 2019, 05:10:33 PM
Post by: eTripper on January 20, 2019, 12:07:03 AM
(https://i.imgur.com/bcebbVkl.jpg)
(https://i.imgur.com/Qm96rr9l.jpg)
(https://i.imgur.com/cQuds0Vl.jpg)
Post by: Barry Rowland on January 20, 2019, 01:59:15 AM
Post by: ThundahBeagle on January 20, 2019, 05:48:08 AM
Here's a pic of the back of the 110 sheath; which interested you. I am planning on putting this 'classic' back into my EDC rotation.
(https://i.imgur.com/bcebbVkl.jpg)
(https://i.imgur.com/Qm96rr9l.jpg)
(https://i.imgur.com/cQuds0Vl.jpg)
Very nice sheath eTripper!
That sounds definitely the old style loop on the back of that sheath. Same as my '78, except I don't have that kick-a $$ embossing like yours. My '78 has just Buck in a western style script, while my new one has Buck and the anvil. Yours is something nice
Post by: eTripper on January 20, 2019, 08:18:39 PM
Post by: SteveC on January 23, 2019, 04:32:02 PM
Post by: Wspeed on January 23, 2019, 04:43:43 PM
Post by: Aloha on January 23, 2019, 04:46:04 PM
Post by: Wspeed on January 23, 2019, 04:50:16 PM
Only seven more days left
for the challenge to be finished :D
Post by: VICMAN on January 23, 2019, 05:16:51 PM
Nice video Steve! :cheers: :tu: :tu:
Post by: Barry Rowland on January 23, 2019, 05:26:13 PM
:tu: I've seen this video before but worth another look. Still carrying my Buck 110 on my hip. Such a terrific piece of knife history and a wonderful simple honest knife.
Post by: Mechanickal on January 28, 2019, 08:20:18 PM
Found it on YT in French, but the clip is the same:
https://youtu.be/M52c13HmPUQ
Post by: Wspeed on January 28, 2019, 08:22:31 PM
If you blink you would miss it :D
Post by: Mechanickal on January 28, 2019, 08:34:20 PM
Now my eyes are dry ::)
:rofl:
Post by: Wspeed on January 28, 2019, 08:44:14 PM
Post by: VICMAN on January 28, 2019, 10:53:22 PM
Just spotted the 110 in a "Caprice Des Dieux" commercial on TV.
Found it on YT in French, but the clip is the same:
Very good eyes Mechanickal! :like: :tu: :tu:
That goes by fast........cool find! :cheers:
Post by: Wspeed on February 03, 2019, 04:23:33 PM
Post by: David on February 03, 2019, 04:34:01 PM
Finally carrying my 110 again :woohoo:
Good pic Speedy! :like:
Post by: Wspeed on February 03, 2019, 04:35:12 PM
Post by: Barry Rowland on February 03, 2019, 07:50:31 PM
Post by: Wspeed on February 03, 2019, 08:01:10 PM
Post by: VICMAN on February 03, 2019, 10:46:52 PM
Finally carrying my 110 again :woohoo:
Cool pic Wspeed! :like: :tu: :tu:
Post by: SteveC on February 03, 2019, 10:50:34 PM
Post by: Wspeed on February 03, 2019, 11:35:21 PM
Post by: Kampfer on March 08, 2019, 05:55:09 PM
Sent my 110 slim pro to buck for warranty, let's see in six weeks.Six weeks passed and received a email from Buck.
Warranty Description:
110BKS4 - Blade felt soft and was leaving rust marks after cleaning. Checked Rockwell Hardness which came back 51.6 HRC , Heat Treat range is 59.00 - 61.00 HRC. Courtesy replacement of new 110BKS4 which is currently on back order. Ship onces we have stock.
Expected Processing Date: 3/28/2019
Post by: Wspeed on March 08, 2019, 05:58:39 PM
Just a shame you have to wait so long >:(
Post by: Kampfer on March 09, 2019, 03:59:27 AM
Post by: Nix on March 09, 2019, 04:07:36 AM
It is disappointing that it's been such a slow process.
Post by: Aloha on March 09, 2019, 10:44:47 PM
Post by: Barry Rowland on March 10, 2019, 12:10:32 AM
Post by: VICMAN on March 10, 2019, 12:55:58 AM
Glad you are getting a replacement! :cheers:
Post by: Wspeed on March 10, 2019, 04:52:01 PM
(https://i.imgur.com/cSNC6JNh.jpg)
Post by: Barry Rowland on March 10, 2019, 05:04:29 PM
Post by: David on March 10, 2019, 05:05:14 PM
Carrying my favourite knife the 110 :tu:
(https://i.imgur.com/cSNC6JNh.jpg)
Its always nice to carry a favorite! :like:
Post by: Wspeed on March 10, 2019, 05:43:17 PM
Unfortunately I can’t carry it everyday
Because of the knife laws over here
And there have been a lot of stabbings
So they are talking about knives on the news everyday
It will be interesting to see what they are going to do >:(
Post by: ThePeacent on March 10, 2019, 07:56:37 PM
And there have been a lot of stabbings
(https://i.imgur.com/Vcza8sl.jpg)
Post by: Wspeed on March 10, 2019, 08:03:58 PM
Post by: Dean51 on March 10, 2019, 11:59:13 PM
Carrying my favourite knife the 110 :tu:
(https://i.imgur.com/cSNC6JNh.jpg)
8) :like:
Post by: Wspeed on March 11, 2019, 12:00:03 AM
Post by: Nix on March 11, 2019, 12:07:22 AM
Post by: Nix on March 11, 2019, 12:10:31 AM
(https://i.imgur.com/rVZoKDS.jpg)
Post by: Wspeed on March 11, 2019, 12:31:05 AM
Post by: Barry Rowland on March 12, 2019, 09:18:17 PM
Post by: mikekoz on March 12, 2019, 10:29:06 PM
Post by: Wspeed on March 12, 2019, 10:41:50 PM
Post by: Barry Rowland on March 12, 2019, 10:45:39 PM
Post by: The Lone Wanderer on March 23, 2019, 07:53:44 PM
Post by: Nix on March 23, 2019, 08:07:52 PM
Post by: Barry Rowland on March 23, 2019, 09:55:27 PM
Post by: Wspeed on March 23, 2019, 11:51:01 PM
Post by: toolguy on March 24, 2019, 02:48:24 AM
(http://i67.tinypic.com/241s3yb.jpg)
(http://i68.tinypic.com/2mxrk04.jpg)
Post by: Aloha on March 24, 2019, 02:52:44 AM
Post by: Wspeed on March 24, 2019, 12:23:00 PM
Post by: Nix on March 24, 2019, 02:34:39 PM
Post by: Wspeed on March 24, 2019, 04:43:41 PM
(https://i.imgur.com/D8DQQUbh.jpg)
Post by: toolguy on March 24, 2019, 05:05:24 PM
Post by: Wspeed on March 24, 2019, 05:06:38 PM
Post by: toolguy on March 24, 2019, 05:09:27 PM
That blade is gorgeous toolguy :dd: :like: :like:
Which one?
There are three in my post.If I had to choose I like the bottom blade best.
Post by: Wspeed on March 24, 2019, 05:12:18 PM
Which one?Yes the bottom pic has the best looking blade :tu: :like:
There are three in my post.If I had to choose I like the bottom blade best.
Post by: toolguy on March 24, 2019, 05:33:42 PM
Post by: Wspeed on March 24, 2019, 05:36:45 PM
Post by: toolguy on March 24, 2019, 05:38:17 PM
Post by: Wspeed on March 24, 2019, 05:40:06 PM
Post by: toolguy on March 24, 2019, 05:43:24 PM
Nice B&W pics toolguy :dd: :like:
They need more work,they're not as cool as your pic.
Post by: Wspeed on March 24, 2019, 05:49:26 PM
You just don’t want to make them look too dark :cheers: :tu:
Post by: Barry Rowland on March 24, 2019, 06:01:51 PM
Post by: The Lone Wanderer on March 24, 2019, 07:49:20 PM
Post by: Wspeed on March 24, 2019, 07:52:52 PM
Post by: David on March 24, 2019, 08:23:51 PM
Hiking with the 3 Dot
A good good knife to have on a hike! :like:
Post by: David on March 24, 2019, 08:24:55 PM
Here are few more Buck 110's with Damascus blades.
Toolguy those are beautiful and TR approved! :like: verah much.
Post by: Barry Rowland on March 25, 2019, 02:43:25 AM
A good good knife to have on a hike! :like:
Post by: eTripper on March 25, 2019, 04:27:09 AM
(https://i.imgur.com/VyfCWQ7l.jpg)
(https://i.imgur.com/jBETIs6l.jpg?1)
Post by: SteveC on March 25, 2019, 04:51:11 AM
Post by: Wspeed on March 25, 2019, 12:30:23 PM
Post by: Barry Rowland on March 25, 2019, 01:49:20 PM
Post by: eTripper on March 27, 2019, 07:04:11 PM
(https://i.imgur.com/nREOkool.jpg)
Post by: Barry Rowland on March 27, 2019, 07:15:48 PM
Post by: Wspeed on March 27, 2019, 07:52:00 PM
Post by: Andetto on March 09, 2021, 09:35:08 AM
For those of you who are quite a bit younger than I am, in the 1960's the main US knife manufacturers were Buck, Case, Schrade Walden Cutlery Corporation (a division of the Imperial Knife Associated Companies), Kabar, Camillus, and Western. There was no such thing as Cold Steel, Spyderco, Benchmade, Strider,Chris Reeve Knives, CRKT, etc.
In the early 1960's when Buck introduced the 110 Folding Hunter most knives sold from about $2.00 to about $6.00, (in 1963 Federal minimum wage was $1.25 an hour), so when Buck introduced knives starting at $16.00 many people said no one would buy them, but they used 440C stainless hardened to a Rockwell hardness of 58 to 60 RC which no one else was offering and they offered a lifetime warranty.
The Folding Hunter was originally designed as a knife that was solid like a fixed blade, but would give the horseman and hunter a knife he could carry safely when riding on horseback or in a vehicle. There is some danger with a fixed blade, if you fall on it regardless of the sheath design.
Buck envisioned it as a knife that would mainly be used by hunters just during hunting season each year, but the public saw the utility of it for edc use and it caught on rapidly and soon it was common to see a Buck 110 on the belt of the average working man.
It became the best selling knife in the world and was the most copied at that time. In 1964, they shipped 255 of them. In 1965, they shipped 2,500, and in 1966, 10,000, and it just kept growing from there. In the first 13 years they sold over 2 1/4 million Buck 110's.
Buck's warranty and use of a higher grade steel raised the bar for the other companies, and they ended up improving their products as a result. Owning a Buck knife meant holding a piece of quality craftsmanship built to last.
While it was not the first lockback knife,the Buck Folding Hunter is the knife that blazed the trail for all the other lockbacks that followed it. It is the knife that made it popular to carry a lockback for edc.
And that is why I have a fondness for the Buck 110 Folding Hunter.
Here are my Buck 110's with 3 Buck 112's on the right side.
Click on 569.83 for full picture.
Good story and nice collection.
Post by: Aloha on March 09, 2021, 02:10:07 PM
Post by: Barry Rowland on March 09, 2021, 02:49:45 PM
Post by: Aloha on March 09, 2021, 03:02:23 PM
Post by: David on March 10, 2021, 01:38:50 AM
:iagree:. This is the thread that finally moved me to get my first 110.
:ahhh :tu: Cant wait to see it buddy! :like:
Me to! I had looked at the flea market but they wanted so much money for them thankfully I finally found one at a great price and one of the older ones with 440c steel
8) Be looking forwards to see some pics of it. :tu: :like:
Post by: Barry Rowland on March 10, 2021, 03:01:42 AM
Post by: toolguy on March 10, 2021, 03:46:08 AM
Post by: David on March 10, 2021, 04:18:17 AM
Here it is! It's nothing fancy, just a 2018 model. When I was in school, everyone had one strapped to their belt, or a Pakistani look alike. I read this thread, and thought it was time to go get one after almost 40 years. My son beat me to getting one for himself, and it's been his primary carry knife in the Coast Guard. He absolutely loves his!
Glad you finally got one Barry. Nice looking 110. :tu: I remember back in the day every man jack worth his salt had a Buck 110.
Post by: David on March 10, 2021, 04:19:54 AM
Here is a BCCI knife with Sambar Stag and a Damascus blade,number 59 out of 260 made.
Awesome 110 ToolGuy! :tu:
Post by: toolguy on March 10, 2021, 05:27:00 AM
Here it is! It's nothing fancy, just a 2018 model. When I was in school, everyone had one strapped to their belt, or a Pakistani look alike. I read this thread, and thought it was time to go get one after almost 40 years. My son beat me to getting one for himself, and it's been his primary carry knife in the Coast Guard. He absolutely loves his!
Now with your family registered with the BCC Barry you'll have many more opportunities to buy some cool 110's at a discounted price.
It was the same when I grew up.Everyone seemed to have a 110 on their belt.
Post by: toolguy on March 10, 2021, 05:27:28 AM
Awesome 110 ToolGuy! :tu:
Thanks David.
Post by: Barry Rowland on March 10, 2021, 01:57:00 PM
Post by: SteveC on March 10, 2021, 03:59:42 PM
Here is a BCCI knife with Sambar Stag and a Damascus blade,number 59 out of 260 made.
very nice ! :tu:
Post by: Aloha on March 10, 2021, 06:21:37 PM
Thanks David! Toolguy, there's nothing like a 110 in stag. They are meant for it :tu:
:iagree: Stag on a 110 :gimme:
Post by: toolguy on March 10, 2021, 10:49:16 PM
very nice ! :tu:
:iagree: Stag on a 110 :gimme:
Thanks guys.
I'm sure I've displayed these but they deserve an encore.LOL
Post by: David on March 10, 2021, 11:30:59 PM
Post by: toolguy on March 11, 2021, 12:18:59 AM
I never tire of seeing those beauties Toolguy! :like:
Thanks David.
I'd like to buy more but whenever I find them the asking price has been off the charts.
Post by: SteveC on March 11, 2021, 01:09:15 AM
I never tire of seeing those beauties Toolguy! :like:
:iagree:
Post by: VICMAN on March 12, 2021, 12:07:45 AM