Multitool.org Forum
Non Tool Forum => Gadget Freak and EDC Forum => Topic started by: turbov21 on October 27, 2009, 10:15:27 PM
-
In the last few months that I've been building up my tool box, I've tried to balance name brand tools with cheapies (whatever Wal-Mart or my home supply store has that looks interesting). The majority of name brand tools I've been buying have been Stanely and Sheffield (probably a few more by Sheffield). Recently, my mother told me that my grandfather was a Craftsman fan, and since discovering my local Sears sells Craftsman tools, my most recent purchases have been that. There there's Popular Mechanics which seems to promote Channellock tools.
There's a lot of brands out there.
Now I'm not looking to compare which brands are better, as I'm sure they all have trade offs, but I am curious: what brand of non-multitools tools do people here prefer? What brands am I missing by virtue of only knowing what's sold here in the states?
-
Most of the tools I've got are Kobalt. My mom is a bit of a handy woman (and way better at it than my dad) and she's been helping me build up my toolbox. I like them a lot. Not overly expensive and very good quality from my limited experience.
-
Got the woodworking bug a few years back and I've long lusted after some veritas (http://www.veritastools.com/) planes
Just check out this baby (http://www.veritastools.com/Products/Page.aspx?p=485) :ahhh
-
Snap On Ratchets, Klein screwdrivers and cutters, linesman pliers, and fishtape. Paladin punchdown and data tools, Milwaulkee holesaws, Bosch powertools, Craftsman prybars, Kolbalt precision screwdrivers, Husky impact sockets (half inch) , Husky mallet, Stanley Fatmax 25' tape measure, Stanley T-square, Williams 3/8 deep sockets,
and Snap On again as they make the best Newton meter torque wrenches.
If you can get old school Craftsman... Get It! Their old sockets are bulletproof. Cresent makes good tools too for the price. I hate paying Snap On prices but one you use one of their ratchets you'll never go back.
-
Snap On Ratchets, Klein screwdrivers and cutters, linesman pliers, and fishtape. Paladin punchdown and data tools, Milwaulkee holesaws, Bosch powertools, Craftsman prybars, Kolbalt precision screwdrivers, Husky impact sockets (half inch) , Husky mallet, Stanley Fatmax 25' tape measure, Stanley T-square, Williams 3/8 deep sockets,
and Snap On again as they make the best Newton meter torque wrenches.
If you can get old school Craftsman... Get It! Their old sockets are bulletproof. Cresent makes good tools too for the price. I hate paying Snap On prices but one you use one of their ratchets you'll never go back.
Wow, ain't that the truth? I love my Snapon stuff, but geeze, I hate the price...
Husky (Home Depot), Kobalt (Lowes), Ridgid (Home Depot) and to a slightly lesser degree Craftsman are all pretty good amateur tools. When compared to $napon, you'll see the difference, but since all carry a lifetime warranty, I'd say get stuff from the most convenient of these for you.
-
i forgot about Ridgid powertools! They are well worth the bread. Battery or motor kicks they give you a new one under their lifetime warranty. I've used it a couple of times on my 3/8ths beater drill.
-
Cresent makes good tools too for the price.
Marvin's, my local hardware store, carries crescent tools. I wasn't sure about them, so thanks for the endorsement. :)
Also, thanks for the brand names. I'm going to enjoy window shopping these.
-
I buy tools that say USA, U.S.A. , Made in USA, Forged in USA, or variations of that... Brand names don't really matter to me.
-
I buy tools that say USA, U.S.A. , Made in USA, Forged in USA, or variations of that... Brand names don't really matter to me.
Klein tools are made in the USA, Snap On and some Craftsman.
-
I buy tools that say USA, U.S.A. , Made in USA, Forged in USA, or variations of that... Brand names don't really matter to me.
I try to abide by this, which is part of the reason I'm trying to switch to Craftsman, but I have more than a couple of tools from China and Mexico in my collection.
-
I'm rather partial to a King Dick spanner ;)
I have a bag of carpentry tools which I have had for 20 years and are still going strong. Amongst them, Stanley is most common I think - all from the UK though so not many US made tools. The exception is a lovely Estwing hammer I bought myself like this one:
(http://www.alltoolsdirect.co.uk/ekmps/shops/alltoolsdirect/images/e16c.jpg)
-
This place isn't that cheap but it does have some great tools turn up:
http://www.oldtools.co.uk/
-
my collection started in the late 80's, Stanley and Craftsman plus the rest,
my craftsman are still going strong but my all time fav was S&K brand.
I understand snap-on owns them now.
who knows now-a-days where anything is made :think:
so now when I buy a tool I look for "Lifetime Warranty"
and while it may not be the best I can get it helps.
-
Teng-tools! Good price-quality if you ask me. Have some stuff from Hazet as well but I try to keep everything from the same brand. Not a smart thing to do, I know, because some tools are better from that brand and others are better from an other brand. But I like to have some sort of a consistency in my tools :) The only other brand I'm looking into is Gedore because they should have a very nice stainless steel tool line that is nice to have on a the boat.
I know Snap-on but never handled it my self. Not easy to get over here and very expensive so I'm told.
-
I've got some Teng combination spanners and ratchet sets for work, very nice I'd recommend them. Other work brands include Knippex for snips etc and CK for VDE screwdrivers. Stage department have some festool (http://www.festool.co.uk/) kit which is very good and comes in a nice green colour too.
Got some love for Barco tools too, their multi is rubbish but they did invent the adjustable spanner (allegedly) and I have one of their socket sets at home.
-
I'm rather partial to a King Dick spanner ;)
I have a bag of carpentry tools which I have had for 20 years and are still going strong. Amongst them, Stanley is most common I think - all from the UK though so not many US made tools. The exception is a lovely Estwing hammer I bought myself like this one:
(http://www.alltoolsdirect.co.uk/ekmps/shops/alltoolsdirect/images/e16c.jpg)
Speaking of UK tools heres some that were in my tool chest.
(http://i577.photobucket.com/albums/ss218/americanlockpicker/IMGP1147.jpg)
-
Klein mostly, with Channellock, Wiha, Stanley, Husky, Lufkin, Crescent, Xcelite, DeWalt and others.
-
Ever notice that when your Xcelite tools get older the handles smell like catfish bait?
-
When I left school to do my Mechanics apprenticeship I paid off my tool kit through the garage (I was on $3.00/hr :o) It was an Australian made Sidcrome tool kit.
Sidcrome is/was an aussie icon , solid no nonsense tools with life time warranty. Stanley bought them out in 1990 & promptly stopped making tools in Australia >:( >:( . You can still buy Sidcrome tools they just are not made in OZ now :(
-
When I left school to do my Mechanics apprenticeship I paid off my tool kit through the garage (I was on $3.00/hr :o) It was an Australian made Sidcrome tool kit.
Sidcrome is/was an aussie icon , solid no nonsense tools with life time warranty. Stanley bought them out in 1990 & promptly stopped making tools in Australia >:( >:( . You can still buy Sidcrome tools they just are not made in OZ now :(
Thats a shame.
-
Most of the tools I've got are Kobalt. My mom is a bit of a handy woman (and way better at it than my dad) and she's been helping me build up my toolbox. I like them a lot. Not overly expensive and very good quality from my limited experience.
I picked up a couple of Kobalt tools yesterday, and I have to agree. They aren't too pricey, but they feel pretty solid.