What I want to see is Monrogue earn his fire badge with this one :pok:Lol! Vid must be posted
Glad you're enjoying it. From the pics it looks to be a bit out of its target element. Be interested to see how it performs.I should be on the trail in a few weeks. I'll try and get some "in the target element" pics if I can.
Sent from 9 miles from the face of the sun
My thoughts exactly. I'm not expecting it to really excel in the day to day; I have my other LMs for that... though if it surprises me and holds up, it may make it to my EDC occasionally. I usually hike with my Skele CX because it's light and very capable but there are a couple tools on the Signal that I'd like to have had on a couple hikes but certainly didn't want the weight of my Wave. I know the Signal is a good bit heavier than the Skele but I'm willing to give it a shot and see what happens on the trail.
Sent from my iPhone using Tapatalk
That seems a more sensible price :)yeah couldn't pass it up.
That's definitely a good sign that the price is coming down. If the distributors are getting it cheaper then maybe Leathermans sales aren't meeting projections and they are listening to the noise.....don't know, but I'm glad you got a good deal.im glad to see it as well. I don't think a ferro rod w a whistle, a micro file and a pommel warrant it costing so much more than a Wave.
Sent from 9 miles from the face of the sun
An owner's club not started by zed? :ahhh
I think we'll have to check the rules and regulations if this is allowed. >:D
Glad you're liking your new multi. :cheers:
Glad you're enjoying it. From the pics it looks to be a bit out of its target element. Be interested to see how it performs.
Sent from 9 miles from the face of the sun
What I want to see is Monrogue earn his fire badge with this one :pok:Lol! Vid must be posted
Sent from my iPhone using Tapatalk
My opinion of it is obviously not very high. However, my perspective comes as a hard use tradesman and it's an epic fail in this department but I realize it's a niche tool and I've seen little analysis of its functionality as a bush tool. I'll be interested to see some observation of practical use.
Sent from 9 miles from the face of the sun
I'm in
(http://images.tapatalk-cdn.com/15/11/07/fc3383041376017ea5e9c6ca4bacac41.jpg)
Sak's rule !
Count me in.
(http://forum.multitool.org/index.php?action=dlattach;topic=62987.0;attach=249396;image)
That seems a more sensible price :)yeah couldn't pass it up.
Sent from my iPhone using Tapatalk
That's definitely a good sign that the price is coming down. If the distributors are getting it cheaper then maybe Leathermans sales aren't meeting projections and they are listening to the noise.....don't know, but I'm glad you got a good deal.im glad to see it as well. I don't think a ferro rod w a whistle, a micro file and a pommel warrant it costing so much more than a Wave.
Sent from 9 miles from the face of the sun
Sent from my iPhone using Tapatalk
he bought one returned it, bought another and returned that one as well. Kampfer is also the one who gave me the $72 tip on cutleryshoppe.comCount me in.
(http://forum.multitool.org/index.php?action=dlattach;topic=62987.0;attach=249396;image)
I thought you returned yours, or did you get another?
I'm indid you swap the combo blade from a wave?
(http://images.tapatalk-cdn.com/15/11/07/fc3383041376017ea5e9c6ca4bacac41.jpg)
Sak's rule !
The price for the Signal has been $72.40 from the first day it appeared in inventory at CS,until it was raised to $74.80 just recently.agreed. The price hike is simply for the tool with a nylon sheath.
I don't understand why anyone would want to pay full retail price for any tool,SAk or Leatherman.
You don't have to leave your house,deal with traffic,waste time and gas and pay sales tax if you buy from dealers such as CS.
I'm indid you swap the combo blade from a wave?
(http://images.tapatalk-cdn.com/15/11/07/fc3383041376017ea5e9c6ca4bacac41.jpg)
Sak's rule !
Sent from my iPhone using Tapatalk
The price for the Signal has been $72.40 from the first day it appeared in inventory at CS,until it was raised to $74.80 just recently.agreed. The price hike is simply for the tool with a nylon sheath.
I don't understand why anyone would want to pay full retail price for any tool,SAk or Leatherman.
You don't have to leave your house,deal with traffic,waste time and gas and pay sales tax if you buy from dealers such as CS.
Sent from my iPhone using Tapatalk
(http://images.tapatalk-cdn.com/15/11/12/1c489443628fc0fef10e90952fbaf72d.jpg)(http://images.tapatalk-cdn.com/15/11/12/63e5a5791ee8c2c68197717e9e668a06.jpg)(http://images.tapatalk-cdn.com/15/11/12/2825031d02f19e78b60f43e5a081cb0b.jpg)
Great tool, great club. Hopefully this won't turn into another signal bashing thread.
The price for the Signal has been $72.40 from the first day it appeared in inventory at CS,until it was raised to $74.80 just recently.agreed. The price hike is simply for the tool with a nylon sheath.
I don't understand why anyone would want to pay full retail price for any tool,SAk or Leatherman.
You don't have to leave your house,deal with traffic,waste time and gas and pay sales tax if you buy from dealers such as CS.
Sent from my iPhone using Tapatalk
Thanks and you're welcome....for the welcome... :DAward for best post goes to... ;)
Thanks and you're welcome....for the welcome... :DAward for best post goes to... ;)
Sent from my iPhone using Tapatalk
Signal with Ceracoted OHT. Love leatherman tools.I really want an OHT... Just can't justify it right now lol.
Signal with Ceracoted OHT. Love leatherman tools.I really want an OHT... Just can't justify it right now lol.
I have a first production run BO ST300... Maybe someone wants to trade haha!
Sent from my iPhone using Tapatalk
Haha! I understand the struggle lol!
Me too, just want it to want it, I'm not even sure I'll like it.
How have you guys been carrying yours? Pocket clip, Carabiner, or sheath?
This thread is making me want a signal.... Must resist...
This thread is making me want a signal.... Must resist...Resisting is for the weak, go for it, do it. Indulge yourself. Come to the yellow side :-)
Can someone tell me if the hammer is a different shade?
Imagine one of these with BO instead of SS.
Im in.
Sent from my SCH-I535 using Tapatalk
Pairs up nice with the CT 34
(http://images.tapatalk-cdn.com/15/11/13/fe750032ce3c01d1bd11cb5ef39f6b18.jpg)
Sent from my iPhone using Tapatalk
Thanks and you're welcome....for the welcome... :DAward for best post goes to... ;)
Sent from my iPhone using Tapatalk
Haha! I understand the struggle lol!I really want an OHT... Just can't justify it right now lol.
I have a first production run BO ST300... Maybe someone wants to trade haha!
Sent from my iPhone using Tapatalk
Me too, just want it to want it, I'm not even sure I'll like it.
How have you guys been carrying yours? Pocket clip, Carabiner, or sheath?
This thread is making me want a signal.... Must resist...
Come to the dark side !
Sent from my iPhone using Tapatalk
(http://images.tapatalk-cdn.com/15/11/13/0785fed68d36f33f5e65652727a030d7.jpg)This thread is making me want a signal.... Must resist...
Come to the dark side !
Sent from my iPhone using Tapatalk
Yessss....DO EEEET :pok: :whistle:
(http://images.tapatalk-cdn.com/15/11/13/0785fed68d36f33f5e65652727a030d7.jpg)
Sent from my iPhone using Tapatalk
The force is strong
The force is strong
An owner's club not started by zed? :ahhh
I think we'll have to check the rules and regulations if this is allowed. >:D
Glad you're liking your new multi. :cheers:
That's how I was rocking it today actually. In jeans the back pocket carry doesn't work with the jeans I have. Not enough room, unless I was carrying a PST, or a Rebar, but that's a tight fit.Skinny Jeans?
I appreciate your blessing buddy ;)An owner's club not started by zed? :ahhh
I think we'll have to check the rules and regulations if this is allowed. >:D
Glad you're liking your new multi. :cheers:
Heyok: this is a outrage :D good on ya,nice too see the signal getting a club,now what can my next club be :think:
Lol, yeah not quite my friend ;)That's how I was rocking it today actually. In jeans the back pocket carry doesn't work with the jeans I have. Not enough room, unless I was carrying a PST, or a Rebar, but that's a tight fit.Skinny Jeans?
Sent from 9 miles from the face of the sun
LOL....couldn't pass up that opening.Lol, yeah not quite my friend ;)That's how I was rocking it today actually. In jeans the back pocket carry doesn't work with the jeans I have. Not enough room, unless I was carrying a PST, or a Rebar, but that's a tight fit.Skinny Jeans?
Sent from 9 miles from the face of the sun
I think it's just the brand or style or whatever :think:
The rear pockets are smaller and don't allow room for more than my wallet to sit comfortably. I don't wear jeans often though.
Sent from my SM-G920R4 using Tapatalk
Got my Signal today... and two Tootsie Pops rolls out of the envelope :woohoo: Thank you Cutlery Shoppe :tu:
Order placed Friday night and got it on Monday. Great job Cutlery Shoppe! Had to time my lunch hour so I could intercept it at the mail box.... totally worth it. Looks very nice. Very compact to what I imagined it would be. Feels very light too, just a little bit heavier than the Juice KF4 I was carrying.
I noticed that it was partially open and thought that the pivots might need tightening. Played with it and thought it was a good thing because I do not need to break it in and then thought it sucks because it will just flop open when carrying it. That's when I noticed the slider lock... a nice touch in my opinion.
Well, I got to wait 2 more weeks for the Juice challenge to end. Till then I will just have to refrain my self to touch but not play. :wait:
While you've got those two to hand, could I make a pic request please? :salute: any chance of a pic of the KF4 alongside the handle with the caribiner, to compare the length of the Juice with the length of the handle before the clip starts (hope that makes sense) :cheers:
Congrats , Rishardh . I hope you enjoy your new gear.
Sent from my SCH-I535 using Tapatalk
Is this what you were looking for?
Perfect! Thank you :cheers:
Welcome rishardh :cheers: I love that slide lock as I had that same thought when I first played with mine. I'm assuming that looseness is intentional then, but not sure.
Sent from my SM-G920R4 using Tapatalk
Agreed on best looking MT !
Even without the yellow.
(http://images.tapatalk-cdn.com/15/11/17/927379938ffa8825d29a2255264e6c45.jpg)
Sent from my iPhone using Tapatalk
AgreedAgreed on best looking MT !
Even without the yellow.
(http://images.tapatalk-cdn.com/15/11/17/927379938ffa8825d29a2255264e6c45.jpg)
Sent from my iPhone using Tapatalk
Looks better without the yellow crap all over it.
After playing with it around our country retreat,I came to the conclusion that it would make a wonderful tool for the younger generation.When I arrived home I ordered six more for our grandkids.This tool will be their first multi-tool.
Exactly this as it relates to carrying a SAK with it. It's perfect for that. I certainly wouldn't carry the Signal as a standalone item though for sure.AgreedAgreed on best looking MT !
Even without the yellow.
(http://images.tapatalk-cdn.com/15/11/17/927379938ffa8825d29a2255264e6c45.jpg)
Sent from my iPhone using Tapatalk
Looks better without the yellow crap all over it.
In a pinch the crap would work, would I take it as back up, not on your life. That's why I took mine off. The tool is bare bones but that is what I like about it. I like to carry an SAK so not much duplicates.
Sent from my iPhone using Tapatalk
:twak:
After playing with it around our country retreat,I came to the conclusion that it would make a wonderful tool for the younger generation.When I arrived home I ordered six more for our grandkids.This tool will be their first multi-tool.
Well, we know who's getting nominated for the "bad grandpa" award
Sent from 9 miles from the face of the sun
Took these pics for the Fire Maker badge.
Nice
Took these pics for the Fire Maker badge.
Oddly enough I don't :think:
Nice... I love it. I am guessing you have a thing for red heads too :D
I've got temporary membership thanks to Kampfer. :cheers:Sweet. Maybe you'll end up a permanent member if you like it
I've got temporary membership thanks to Kampfer. :cheers:Sweet. Maybe you'll end up a permanent member if you like it
(https://farm1.staticflickr.com/633/23225280493_b3265f8e20_b.jpg)![]()
Sent from my SM-G920R4 using Tapatalk
Happy to be checking in as part of this club, I gotta feeling my Signal will be around for a while. I do need a new ferro rod though, mine is about used up after a few fires. Probably need more practice with it.Nice pic![]()
The ferro rod can be popped out and rotated to a fresh surface, unless you've done so already.
Sent from my SM-G920R4 using Tapatalk
Every time I see the price of the Signal (and the bracelet) I just laugh, and it's just getting worse with the exchange rate.
Truly thankful they don't awaken the must-have in me :facepalm:
I won't argue with the pricing issue.Every time I see the price of the Signal (and the bracelet) I just laugh, and it's just getting worse with the exchange rate.
Truly thankful they don't awaken the must-have in me :facepalm:
Yes, the retail price is insane. They are targeting the $500 backpack crowd >:( If you can get your hands on one for 30% off or better it is a nice MT.
I'm inHey buddy! Welcome to the club dude
(http://images.tapatalk-cdn.com/16/01/25/a4e89b6f709255f03507efe51242aa9e.jpg)
Lovin it every day!Sweet
I'm a huge Leatherman fan and have a ton of there tools. I got to handle a Signal today. It was built decent, but I just don't see me using an inch long Ferro rod or sharpener. Just not functional. The whistle looked questionable as well.
Cool Signal Mod (http://forum.multitool.org/index.php/topic,63314.msg1216891.html#msg1216891)
Cool Signal Mod (http://forum.multitool.org/index.php/topic,63314.msg1216891.html#msg1216891)
I've got a spare Wingman Scissor and was planning on doing the Mini Surge mod but now that I have seen this I might put it on the Signal because I do not have to lose the saw. Need to figure out how to make the saw lock open.
DAMASCUS STEEL FOR SIGNAL :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh:drool:
I'm trying to resist buying a signal but it's my birthday today so might treat myself. I would like to handle one in a shop first though.Happy Birthday Weasel Old chap! How old are you today? :tu:
Sent from my iPhone using Tapatalk
I'm trying to resist buying a signal but it's my birthday today so might treat myself. I would like to handle one in a shop first though.
Sent from my iPhone using Tapatalk
I'm 34 today buddyI'm trying to resist buying a signal but it's my birthday today so might treat myself. I would like to handle one in a shop first though.Happy Birthday Weasel Old chap! How old are you today? :tu:
Sent from my iPhone using Tapatalk
Cheers buddyI'm trying to resist buying a signal but it's my birthday today so might treat myself. I would like to handle one in a shop first though.
Sent from my iPhone using Tapatalk
Many happy returns Weasel :cheers:
I'm trying to resist buying a signal but it's my birthday today so might treat myself. I would like to handle one in a shop first though.Happy birthday bud! Go ahead and treat yourself
Sent from my iPhone using Tapatalk
Happy birthday W :cheers:
Yeah rishardh...ordered my Signal on a Monday and got in the mail on Wednesday (along with the candy--those folks at Cutlery Shoppe have the best price on the Signal and they are nice to deal with)...it is a very cool multitool for EDC... :multi:
One of my tools I haven't actually used that much. The set just seems lacking. I still like it but I guess its waiting more serious usage.
It still might be one of the looking MTs ever made and I love the lock that keeps it shut.
One of my tools I haven't actually used that much. The set just seems lacking. I still like it but I guess its waiting more serious usage.
It still might be one of the looking MTs ever made and I love the lock that keeps it shut.
I was working with my Signal pliers and dropped it on concrete. It bent the lock so that I had to do some surgery to get it to lock again. It
is actually a potential weak point on the tool as it turns out.
I dropped it with the awl open and it bent the awl, the lock was fine though. ;) :D
I'm in! This MT is big surprise for me. I'm passionate with that! >:D
(https://lh3.googleusercontent.com/-_Ow-56OAuGA/V6C9x7gJm6I/AAAAAAAAR3o/F0_vfMEt9sUsmWHvzgTIN64Gg8Qlqox5ACCo/s800/IMG_20160802_154950.jpg)
(https://lh3.googleusercontent.com/-7WWW_nJuZ9o/V6C9yBrpP8I/AAAAAAAAR3k/5T1hAs-ZVY8TxxJMOSPb21wraUoNxASYgCCo/s800/IMG_20160802_155008.jpg)
I'm in! This MT is big surprise for me. I'm passionate with that! >:DWelcome to the club :cheers: It's nice to see another Signal fan :tu:
(https://lh3.googleusercontent.com/-_Ow-56OAuGA/V6C9x7gJm6I/AAAAAAAAR3o/F0_vfMEt9sUsmWHvzgTIN64Gg8Qlqox5ACCo/s800/IMG_20160802_154950.jpg)
(https://lh3.googleusercontent.com/-7WWW_nJuZ9o/V6C9yBrpP8I/AAAAAAAAR3k/5T1hAs-ZVY8TxxJMOSPb21wraUoNxASYgCCo/s800/IMG_20160802_155008.jpg)
I'm in! This MT is big surprise for me. I'm passionate with that! >:D
(https://lh3.googleusercontent.com/-_Ow-56OAuGA/V6C9x7gJm6I/AAAAAAAAR3o/F0_vfMEt9sUsmWHvzgTIN64Gg8Qlqox5ACCo/s800/IMG_20160802_154950.jpg)
(https://lh3.googleusercontent.com/-7WWW_nJuZ9o/V6C9yBrpP8I/AAAAAAAAR3k/5T1hAs-ZVY8TxxJMOSPb21wraUoNxASYgCCo/s800/IMG_20160802_155008.jpg)
I dropped it with the awl open and it bent the awl, the lock was fine though. ;) :D
Seriously?? :-[
I'm in! This MT is big surprise for me. I'm passionate with that! >:D
(https://lh3.googleusercontent.com/-_Ow-56OAuGA/V6C9x7gJm6I/AAAAAAAAR3o/F0_vfMEt9sUsmWHvzgTIN64Gg8Qlqox5ACCo/s800/IMG_20160802_154950.jpg)
(https://lh3.googleusercontent.com/-7WWW_nJuZ9o/V6C9yBrpP8I/AAAAAAAAR3k/5T1hAs-ZVY8TxxJMOSPb21wraUoNxASYgCCo/s800/IMG_20160802_155008.jpg)
Welcome. I got a second one to see if I could mod it, I cannot. I'm thinking I should set it free so someone else can have a play :think:.
I'm in! This MT is big surprise for me. I'm passionate with that! >:D
(https://lh3.googleusercontent.com/-_Ow-56OAuGA/V6C9x7gJm6I/AAAAAAAAR3o/F0_vfMEt9sUsmWHvzgTIN64Gg8Qlqox5ACCo/s800/IMG_20160802_154950.jpg)
(https://lh3.googleusercontent.com/-7WWW_nJuZ9o/V6C9yBrpP8I/AAAAAAAAR3k/5T1hAs-ZVY8TxxJMOSPb21wraUoNxASYgCCo/s800/IMG_20160802_155008.jpg)
Welcome. I got a second one to see if I could mod it, I cannot. I'm thinking I should set it free so someone else can have a play :think:.
:pok: :gimme: :cheers:
I dropped it with the awl open and it bent the awl, the lock was fine though. ;) :D
Seriously?? :-[
Bent tip aside, the awl on the Signal could have been better, ST300 > Rebar > Signal.
:drool: :drool:
oooo they are nice in that colour
(http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/20160803_081410_zpsivnclm1c.jpg) (http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/20160803_081410_zpsivnclm1c.jpg.html)
Bent tip aside, the awl on the Signal could have been better, ST300 > Rebar > Signal.
Welcome. I got a second one to see if I could mod it, I cannot. I'm thinking I should set it free so someone else can have a play :think:.
My modification of Signal. I pasted small permanent magnet into 1/4" Box Wrench. 1/4" hex bits are holding fast in now! :tu:
(https://lh3.googleusercontent.com/-sMYmR2BuKEw/V6LcJgzFIoI/AAAAAAAAR6E/5T1joYI-XJoql7W6wwhAf7ji8MeMnpS6QCCo/s800/P8042714.JPG)
(https://lh3.googleusercontent.com/-8EoiaBDIHSQ/V6LcJjgutQI/AAAAAAAAR6E/2g00ZvQ15VY-jrPrv7GpYCJKv3APuDyfgCCo/s800/P8042713.JPG)
My modification of Signal. I pasted small permanent magnet into 1/4" Box Wrench. 1/4" hex bits are holding fast in now! :tu:Nice :tu:
(https://lh3.googleusercontent.com/-sMYmR2BuKEw/V6LcJgzFIoI/AAAAAAAAR6E/5T1joYI-XJoql7W6wwhAf7ji8MeMnpS6QCCo/s800/P8042714.JPG)
(https://lh3.googleusercontent.com/-8EoiaBDIHSQ/V6LcJjgutQI/AAAAAAAAR6E/2g00ZvQ15VY-jrPrv7GpYCJKv3APuDyfgCCo/s800/P8042713.JPG)
QuoteWelcome. I got a second one to see if I could mod it, I cannot. I'm thinking I should set it free so someone else can have a play :think:.
does that mean the surge blade exchanger wont fit?
:cheers:
Wow!! :ahhh :ahhh :ahhh :cheers: :cheers: :cheers:
:sa: :sa: :sa: :D :cheers: :cheers:
:sa: :sa: :sa: :D :cheers: :cheers:
Pretty cool Obi1 :cheers:
:sa: :sa: :sa: :D :cheers: :cheers:
Pretty cool Obi1 :cheers:
:imws:
Good to have another POV :cheers: I have been back and forth about getting one as well :think: it is a bit high for what it is but it is awesome that it is a beefier Skeletool and it I really :like: It has several possibilities to mod and I also like that about it :salute:
Good to have another POV :cheers: I have been back and forth about getting one as well :think: it is a bit high for what it is but it is awesome that it is a beefier Skeletool and it I really :like: It has several possibilities to mod and I also like that about it :salute:
Sounds to me like you want one, but just need to pull the trigger :pok: ;)
Perhaps birthday and/or Christmas money will help me get this nice tool ;) I can wait til then :D
Welcome to the club Pete :cheers:
Yea, welcome mate.Thanks all, Ive actually had it for about a month or so and just have not posted it here. Overall I would say it is pretty good. Not worth 100 dollars to me, but I got it NIB for 75. When I first got it it was covered in dust (probably sitting in the cardboard box on the shelves for so long), so I cleaned it up and oiled it and it was still a little rough, but it has broken in somewhat now and is much better. The sharpener and fire steel/whistle aren't the best at all, but better than nothing if you weren't planning on being stranded. I would have liked to see a pair of scissors somewhere but its no big deal to carry a classic. The fact that you cant close the tool all the way to use the bit driver kind of sucks, but it would be OK in a pinch or if you prefer to screw with the tool open. I would have honestly liked to have seen either a fully serrated blade or a fully plain blade, but some people only carry one knife/tool, so again, both sides of the combination edge work when you need them to. Pliers and saw are great of course. Tool is very carry able, surprisingly so actually. It has an awl, which is awlsome! And one way to get around the bit driver issues is to just use the hex head if you carry standard bits. I think the hammer was a nice edition. Yeah you could just use a rock, but if you are going to put a carabiner why not put the extra space to use?
What are your initial thoughts on the tool? I think it is a cool tool and pretty underrated.
Cheers
Pete
Thanks for the thoughts on it gdoolittle :cheers: I am seeing a pattern of similar likes and dislikes throughout most of what people say about this tool and I guess for what it is (technically a scaled up Skeletool) then it probably excels but if you look at it as a scaled down Wave then it may not shine as much :think: I do :like: the idea of this tool and will probably get one, especially if I can get one in my price range ;) :like:Looked back at that and wow my grammar was rough :facepalm: thats what happens when you use your phone's keyboard so much. Poncho you've been talking about wanting one for a while. My plan if I didn't like the tool when I got it was to offer to sell it to you! :rofl: Turns out I like it a lot more than I expected. I will keep my eye out for good prices around here though and let you know if I see one on sale!
Thanks all, Ive actually had it for about a month or so and just have not posted it here. Overall I would say it is pretty good. Not worth 100 dollars to me, but I got it NIB for 75. When I first got it it was covered in dust (probably sitting in the cardboard box on the shelves for so long), so I cleaned it up and oiled it and it was still a little rough, but it has broken in somewhat now and is much better. The sharpener and fire steel/whistle aren't the best at all, but better than nothing if you weren't planning on being stranded. I would have liked to see a pair of scissors somewhere but its no big deal to carry a classic. The fact that you cant close the tool all the way to use the bit driver kind of sucks, but it would be OK in a pinch or if you prefer to screw with the tool open. I would have honestly liked to have seen either a fully serrated blade or a fully plain blade, but some people only carry one knife/tool, so again, both sides of the combination edge work when you need them to. Pliers and saw are great of course. Tool is very carry able, surprisingly so actually. It has an awl, which is awlsome! And one way to get around the bit driver issues is to just use the hex head if you carry standard bits. I think the hammer was a nice edition. Yeah you could just use a rock, but if you are going to put a carabiner why not put the extra space to use?
Overall, I like it more than I thought I would and would and do carry it outdoors, but there are a lot of compromises that might just be deal-breakers for some folks.
The Wave scissors was just a test. I have not finished it yet.
And yes, SAK scissors will be superior to the Wave one, but I prefer to keep to one marque when I do the mods. ;)
Pete
Extra money close to Christmas?!unheard of
Suuuurreee....
I mean I will get money from a few different people as my Christmas presents ;) :D
Nice mod Pete! :cheers: :tu: It is always useful to have a pair of scissors no matter what the situation.
Suuuurreee....
(http://uploads.tapatalk-cdn.com/20161114/0dffbd358b204f84e9cc3086dd5aa093.jpg)
Suuuurreee....
(http://uploads.tapatalk-cdn.com/20161114/0dffbd358b204f84e9cc3086dd5aa093.jpg)
G'Day,Same here. I was surprised that the dye had no effect on mine.
Mine is still same colour as when I got it. It did not even change colour when I chucked it in some black RIT dye. I use mine daily too for cutting lunch stuff.
Cheers,
Pete
How does the Signal Compare to the MUT and the Skeletool.
I own both but not a Signal.
Thank you for the comparison pictures.
Maybe I could find a Black Friday deal on a Signal..... :D
Yes the comparison pics were great for me as well :cheers:Yeah, Colt did it I believe.
Question, I know it has been talked about but would a PE Wave blade work in the Signal :think:
Yes the comparison pics were great for me as well :cheers:Yeah, Colt did it I believe.
Question, I know it has been talked about but would a PE Wave blade work in the Signal :think:
Sent from my SM-G920R4 using Tapatalk
Thanks Mons :salute: Yet another reason for me to get a Signal I guess :facepalm: I have an extra Wave balde just sitting around :D
Another club I can join. I went to my favourite Leatherman dealer this morning to collect a nice Signal multitool. :tu:
Another club I can join. I went to my favourite Leatherman dealer this morning to collect a nice Signal multitool. :tu:Welcome to the club :cheers:
S30v
S30v
Is the S30V a better choice than the 154CM?
Cheers,
Pete
Leatherman website say 6 times better 440 , three time beter then 154 cm .. I dont know about that :think:
I got in and out of this club within a week :salute: I bought a used Signal, just to check it out. I liked its weight, frame, and somewhat minimalist approach. What I did not like were the removable plastic parts. Clumsy and not intuitive to use. It was changed hand late last week. So I am Signal-less again :PThe little plastic bits are the only things on the Signal I have not used. The file did a nail a while ago, but that is about it. I would love to have a plastic bit container that fits in where the ferro rod is. Maybe carry an additional two bits. And since it is removable a plastic mould can possibly be made... I am going to check on this with the ferro rod out.
I think that with the bit is a better use than the whistle anyways :tu: :like:
That Ferro Rod slot :cheers:
That Ferro Rod slot :cheers:
I think so too. If I take some off the sides it might fit in flat and have enough plastic for a type of retaining clip(s). One might even be able to keep the whistle functioning then, I will have a look during the week.
Pete
Long bit drive on pocket clip would be awesome..
Hi guys! I have some questions, and i hope this is the right place to ask. I have a Surge, and i absolutely love it...but, you know...summer is coming, and the surge is too big and bulky and heavy to been carried in a pair of shorts...so, since that was my b-day few days ago, i'm thinking at the Signal like a self-present for me (hell, i deserve it!)...my question is this: if i buy the signal, could i swap the bottle opener and the saw of the signal with the big flathead and the t-shank of the Surge? With this mod the Signal could be the perfect multitool...hope you can help me...😁
Inviato dal mio S7 utilizzando Tapatalk
Mmmm... i understand.... i saw a signal on youtube with the scissors (from a wingman) so i hoped to do something like that with the t-shank... now i am a sad man.... ☹:multi:
Inviato dal mio SM-G930F utilizzando Tapatalk
Has anyone thought of combining the scales of a regular signal with the coyote tan signal to create a pure black version? Just curious... :-\
It's still a great multitool...Absolutely... but i'm afraid i'll miss one or two tools from the surge, and i think that i could not find useful the sharpener and the ferrorod of the Signal... mmm...could i swap this two tool with something else? I want to creare the perfect multitool for my needs....
It's still a great multitool...Absolutely... but i'm afraid i'll miss one or two tools from the surge, and i think that i could not find useful the sharpener and the ferrorod of the Signal... mmm...could i swap this two tool with something else? I want to creare the perfect multitool for my needs....
Inviato dal mio SM-G930F utilizzando Tapatalk
Hey Obi, how did you mod the bit driver to fit the spare blades?
Inviato dal mio SM-G930F utilizzando Tapatalk
Hey Obi, how did you mod the bit driver to fit the spare blades?
Imagine if it was the body that had the contour lines on it instead... :dd:
An option of File over Saw would be neat. Heck I'm all about the blade exchanger so maybe work that into the tool LM :pok:. The tool would also benefit from a PE blade. I understand the thought behind a combo edge but LM :pok: 99.99% of all bush crafters buy PE knives as do survivalist, just saying.I'm sure 99.99% of bushcrafters would prefer a saw over a file too.... just saying... :whistle: :pok: ;)
An option of File over Saw would be neat. Heck I'm all about the blade exchanger so maybe work that into the tool LM :pok:. The tool would also benefit from a PE blade. I understand the thought behind a combo edge but LM :pok: 99.99% of all bush crafters buy PE knives as do survivalist, just saying.I'm sure 99.99% of bushcrafters would prefer a saw over a file too.... just saying... :whistle: :pok: ;)
So, the Wave blades drop in the Signal?
I just wished they would give us all of the above as options :dd: :like: :D
They put a 154CM blade in the Skeletool RX painted it orange and changed a premium. Oh and they added a glass breaker bit. I think the Signal also deserved a "nicer" blade steel. I know the issue with sharpening does come up but my thought was those who buy this tool have some "experience". I'm reaching, I know.
So, the Wave blades drop in the Signal?
It depends...
The Saw and File are interchangeable without any issues. The blade fits pivot wise, but is about 1mm thinner than the Signal blade. It fits, but I found that one has to tighten the pivot screw quite well to stop any wobble. I added two additional brass washers from a MUT and that sorted the pivot issues out. What it does not solve it the blade rubbing against the awl. The Signal blade has an offset bevel to accommodate the awl. I found the Wave blade as well as the Texas Tool Crafter Damascus blade rubbing against the awl when closing. I tried putting all the washers on the inside to space the blade out as far as possible but that did not really help either. I think that with the washers and possibly sanding a small bit off the awl, it should fit. I have not tried that... yet.
Cheers,
Pete
Here's where I stand on the Signal ...Hey buddy.....
When I first saw it I liked the looks of it, but thought my Wave/Charge or Spirit could kick its *ss when it came to functionality.
Then this topic appeared, and more and more MTO'ers started buying and using the Signal for EDC.
Then there was a giveaway last month where you could win a Signal, and this got me thinking about the Signal again.
After I didn't win the giveaway Signal ( :cry:) I checked the local outdoorstore and noticed that the Signal had gone down in price (still more expensive than in the U.S., but at least it's about the same price as a Wave now ::)).
So I started looking at youtube reviews of the Signal (again ::)), searched this place and found this topic (again ::)), looked at the pics here (yes Zoidberg, your pics ... :twak:).
And ...
Now I want a Signal :facepalm:.
So once again I've been "tricked" into buying a tool thanks to a giveaway here and/or pics of a fellow MTO member, same thing happened to me with the Leatherman OHT, and with the Charge AL (after seeing daily Charge pics for a month during the Midlman Challenge) and probably a couple of other tools I don't recall at the moment ...
What can I say, "the flesh is weak" I suppose ...
Mine has the file ;)
(https://uploads.tapatalk-cdn.com/20170811/982a2b76a2a34b4d47acfce2a918a170.jpg)
Proud SAKMC member :)
I would love to see a Signal Vs MUT comparison...
I would love to see a Signal Vs MUT comparison...
Here you go
But... don't the dark green and the topo paint jobs look cool?Oh yeah, they look awesome. Just not practical for it's (original) intended purpose.
Chrono, I've played with the TTC blade. It’s ground wrong, rubs on the awl and is very soft. I wouldn't waste my money.
:cheers:
(https://imageshack.com/a/img923/2212/baPhdo.jpg)
(https://imageshack.com/a/img923/2212/baPhdo.jpg)Nice one!
It says my pictures are too big so i can't post
Show content(https://farm5.staticflickr.com/4714/39653783355_49a29ee971_b.jpg) (https://flic.kr/p/23q51gV)
Show content(https://farm5.staticflickr.com/4714/39653783355_49a29ee971_b.jpg) (https://flic.kr/p/23q51gV)
Great pic Zoid :like: :like:
The flower looks like it might eat the bee :o :ahhh Great pic and that is a beatiful flower :like:
Also can't tell from the pic is that a capenter bee or a bumble bee :think:
Show content(https://farm5.staticflickr.com/4666/39918473454_0d961188c4_b.jpg) (https://flic.kr/p/23PsBqj)
It says my pictures are too big so i can't post
Email the pics to yourself, it should reduce them enough.
The flower looks like it might eat the bee :o :ahhh Great pic and that is a beatiful flower :like:
Also can't tell from the pic is that a capenter bee or a bumble bee :think:
Kept looking back and forth with other pics and I guess it is a carpenter bee :tu:
Show content(https://farm5.staticflickr.com/4666/39918473454_0d961188c4_b.jpg) (https://flic.kr/p/23PsBqj)
Nice pic ! :like: :tu:
Thistle ?
It says my pictures are too big so i can't post
Email the pics to yourself, it should reduce them enough.
Gotcha! Here it is! Love it and i made tons of modsmon it already
Gotcha! Here it is! Love it and i made tons of mods on it already...thank youWhat mods? :pok:
Titan Survival Cord. Great stuff.
Here is the modded Black oxide Signal
Here is the modded Black oxide SignalVery cool mods
Here is the modded Black oxide Signal
Here is the modded Black oxide Signal
That looks very nice.
A question: Does the hook blade rub against the awl?
Pete
Here is the modded Black oxide Signal
Let's get the signal fanclub fired up again!
Let's get the signal fanclub fired up again!
Great combo Spartan :like: I still have yet to get a Signal ::) Still haven't found one in my price range :ahhh :D
Let's get the signal fanclub fired up again!
Let's get the signal fanclub fired up again!
Great combo Spartan :like: I still have yet to get a Signal ::) Still haven't found one in my price range :ahhh :D
maybe you haven't received the signal yet? :D
Let's get the signal fanclub fired up again!Awesome Grizzly
I'm imagining the Leatherman logo shining in the sky like a Bat-signal...
I like the mod you did Darrell :like: :tu:Thanks! I has to try out my new dremmel i got for Christmas. Lol. It feels better clipped to my pocket and makes the screwdriver able to be used while the handles are closed. I really like the mod but I will leave the new one intact. Plan on adding to the new one, not taking away.
Latest addition.... Blade exchanger. I just realized looking at the picture, i think it chose its new name.. Man signal. Haha.
Congrats alexanderre :tu: :like:Thanks Poncho
A very simple hack for the signal that really makes it function as 1/4inch hex driver.Good idea HG! :tu:
Noticed a rather weird flaw on my brand new Signal today :(
(https://uploads.tapatalk-cdn.com/20190717/873859c5cfcfcf8219269ea38d3ee46c.jpg)
Has anyone else seen anything similar?
Even more disappointing- the liner lock on the saw didn’t work at all though engaged and looked just fine, so I got the tool replaced at the store and now have a seemingly flawless one
Good to hear you got a good one the second time :tu:
Just to be sure, the flaw on the first one, was it the "casting line" in the bitholder? That looked a little weird indeed, don't know if something like that would create a weak spot, but I wouldn't feel comfortable about that either, so exchanging the tool was the best thing to do in my opinion ;).
Good idea HG! :tu:
And is that a compass on your watch strap?
Can’t really say what was the cause of it, but I could actually live with it (at least I tried), but a totally malfunctioning liner lock on a saw made me act decisivelyThe new one has a bit stiff to open knife and pliers but I’m sure it’ll get better over time
So yesterday I wanted to show my lady how the new Signal I got as a replacement works just fine and the liner lock on a saw would withstand the pressure and the moment I tried to show it it collapsed just like the previous one :oops:
But I checked it at the store like 5 times for sure applying really significant amounts of pressure and it did just great... Then I realized that probably the problem is called "Ballistol", which I applied to both tools the moment I brought them home :D And the cool thing is that there is really no easy way to clean it there, so I guess I'll just have to give it a few days to completely dry out...
Conclusion: beware of using Ballistol with liner locks :multi:
Goog to know, but honestly when are u ever going to put a lot of pressure on the back of a saw? The blade would be concerning. But I'd be ok using the saw even without a lock
So guys, has any of you been using your Signal on some hiking trips for at least 4-5 days in a row? Was it handy? Did you use it much?
And my main question- how did it stand up to moisture? Did you lube it with anything?
You make a good point about the fire steel. I think you would still need to oil the steel with prolonged exposure based on what happened to my wave. The black oxide one would be much more corrosion resistant. The victorinox steel holds up way better in constant wetness. I have never had an issue however with an s30V blade.
Could you please tell me more about your Wave?
I took my wave camping and got a number of rust spots, was easy to remove with just a little lubricant and a rag..but it still urks me. Honestly I prefer the signal more as an EDC than as a camping tool. For woods, especially wet woods, I prefer the Victorinox Spirit or a BO ST300. I like the removable items on the signal, but they are 100% backup and don’t help with tasks on a day to day as much. Surprisingly, I’ve found the whistle and the other components of the Signal to make a very ideal EDC, but I think they completely missed the mark on a “camping” multitool, it is more of a “survival” MT. The blade is completely awesome! Super robust, but should have been plain edge for wood work. It has a great tool set for an OH smurf! moment however, I’d always rather have a tool that has no removable components so that I am less likely to lose things in the woods. I think ones you try a BO ST300 (not rebar because of the thin blades) you will see what I mean. I am eyeing the red and black Signal so maybe my opinions will change...I dont know.
I carry the signal nearly every day (although mine is heavily modded). I just rather have something more heft as a dedicated woodmans tool.
Oh, I see your point. Well, I have a Vic Forester I bought specifically for camping and hiking and it did amazing job there really, but it has no pliers and sometimes those are great for taking a pan off the fire. I’ll take both Vic Forester and LM Signal soon on a hike and will share my thoughts on them being used
I took my wave camping and got a number of rust spots, was easy to remove with just a little lubricant and a rag..but it still urks me. Honestly I prefer the signal more as an EDC than as a camping tool. For woods, especially wet woods, I prefer the Victorinox Spirit or a BO ST300. I like the removable items on the signal, but they are 100% backup and don’t help with tasks on a day to day as much. Surprisingly, I’ve found the whistle and the other components of the Signal to make a very ideal EDC, but I think they completely missed the mark on a “camping” multitool, it is more of a “survival” MT. The blade is completely awesome! Super robust, but should have been plain edge for wood work. It has a great tool set for an OH smurf! moment however, I’d always rather have a tool that has no removable components so that I am less likely to lose things in the woods. I think ones you try a BO ST300 (not rebar because of the thin blades) you will see what I mean. I am eyeing the red and black Signal so maybe my opinions will change...I dont know.
I carry the signal nearly every day (although mine is heavily modded). I just rather have something more heft as a dedicated woodmans tool.
I recently learned about the Signal and been looking for some opinions, especially on the usefulness of the more unique aspects (ferro, hammer, sharpener, whistle). Your comment was very helpful.
Very nice Ivo. :like: I hope you enjoy your new Signal.
JonesE
Found today to my surprise that a ferro rod on my Signal has cracked. Still works, but I feel kinda unsure of its reliability more and more... No idea how and why that happened, I know I can buy a replacement, the whistle is perfectly fine and so on.... Has any of you guys seen anything like that happening to your Signals?
(https://uploads.tapatalk-cdn.com/20190901/0beebe3b66142c4e57ef657c215effbe.jpg)
Bad luck, alex :-\ at least a replacement can be bought but how much actual use did your ferro rod get :think: I know you use it some but how much :salute:Exactly, I used it only two times in order to just try if it works and is usable at all...
I think you illustrated exactly why I feel the ferro rod attachment is best left completely as a worst case option. But I'd talk to leatherman about it.
Cheers
Surprisingly, I’ve found the whistle and the other components of the Signal to make a very ideal EDC, but I think they completely missed the mark on a “camping” multitool, it is more of a “survival” MT.
An owner's club not started by zed? :ahhh
I think we'll have to check the rules and regulations if this is allowed. >:D
Glad you're liking your new multi. :cheers:
Has anyone else had issues with the lock slipping? I bumped the spine of mine on a cabinet and the lock released. Doesn’t take much pressure at all. Tried it on two other Signals with the same result.
Sent from my iPad using Tapatalk
My SIGNAL's so far :hatsoff:Great collection and that Topo is a great looking model :like: :cheers:
So far I counted 10 different signals , only by color :hatsoff:Yes they are not cheap...10 different colors, wow! :facepalm:
:ahhh :ahhh :ahhh I have yet to get one because of their price :facepalm: :DThey are and really above what I am willing to pay myself, but it is what it is. :facepalm:
Nice, Ivo :like:
I was at my buddies house a few days ago. Long story short: we were draining some rain water out of a boat. It gets cold enough to freeze during the nights so there was ice floating in his boat. My buddy had to go back to his house to get some tools so I had a few minutes to mess around with my Signal while I waited for him.Cool photos and use! :like: :cheers:
Cool photos and use! :like: :cheers:
Talked with my son and I asked him how it was working for him...he said he loves it. Has used it and is on him 24/7 except when showering and sleeping. Said it has everything he needs.
Thanks Poncho :cheers:
I think you would like it. I handled it for about 15 minutes checking it out. :tu:Allways tempted to buy one but its just too expensive to buy, Signal would be great outdoor tool
Allways tempted to buy one but its just too expensive to buy, Signal would be great outdoor toolI took my son to Bass Pro and told him to knock himself out for his Bday present, he checked out a lot of Leatherman MT’s and went with the Signal, which is the one of the two I thought he would pick.
Only Tools Matters
Allways tempted to buy one but its just too expensive to buy, Signal would be great outdoor tool
Only Tools Matters
Funny, I think the signal had it's best use as an EDC tool imo. In the woods ST300 all the way.
Great pics Ivo and King_Gorilla.They made one in Robins Egg blue?
I think the Signal is the one Leatherman that just keeps tempting me, but I haven’t tried yet. If I could find a Robins Egg blue on a good sale, that might convince me.
Modded ST300? If so, would you mind linking your ST300?
Modded ST300? If so, would you mind linking your ST300?
They made one in Robins Egg blue?
Yes. I think it could be an awesome compliment to my new Mt Yeoman.Oh ok, yes I think I saw that one at the Leatherman web site...and on payment plans, 4 total I believe. :like: :cheers:
(https://uploads.tapatalk-cdn.com/20200130/3daba00d528ff807652c4c1a64e5941a.jpg)
I just wish I could find one on sale. If not, maybe when my REI dividend comes in.
Here is a great one as well :cheers:
https://forum.multitool.org/index.php/topic,73762.msg1554798.html#msg1554798
Search Supertool 300 (or any Leatherman for that matter) in the Mod Squad forum here (it is 10th down below the Leatherman forum :cheers: ) and there are tons of modded tool threads :tu:
That’s an nice mod!
What mods would the ST300 need to make it better for the woods?
None really needed in my opinion unless you had to have a pair of scissors.
Thanks guys!Don’t forget about the pocket clip - add a few millimeters as well, though give much more usage comport at the same time
Sent from my iPhone using Tapatalk
Thanks peeps :cheers: I am very pleased with it and it seems very solid 8) I can see why people really like this tool :tu: :like:Congrats on a new tool
Finally after a lot of looking for a long time :whistle: I got a Signal! Not only a Signal but the TOPO Signal :o 8):like: :dd:
Finally after a lot of looking for a long time :whistle: I got a Signal! Not only a Signal but the TOPO Signal :o 8)
:woohoo:
(https://i.imgur.com/Q19sFaPh.jpg)
(https://i.imgur.com/ZOWPJQsh.jpg)
(https://i.imgur.com/fIiIJORh.jpg)
And with a buddy :cheers:
(https://i.imgur.com/BJrKu3Wh.jpg)
Thanks guys :hatsoff: and I will for sure check to make sure it doesn't have that problem :ahhh :tu:Awesome, maybe LM figured out a way to fix that once and for all
EDIT I checked mine and it doesn't have that problem thankfully :ahhh Thanks :tu:
Btw guys how do you sharpen your Signal blades? It has uneven bevels and has serrations too - every time I look at it and thinking of using the blade I change my mind because I’m not quite sure how to maintain it right
Thanks for the hints, gents
I do like the tool overall, do like the strong thick blade, the tent pole hammer and ability to take a pan off the fire with pliers, but man do I hate the combo blade
You have, what I think, is the nicest colour of the lot.The color is the one that has been holding my eye for about a year, before I finally broke down and purchased it.
You have, what I think, is the nicest colour of the lot.
You have, what I think, is the nicest colour of the lot.:iagree:
I liked the tool so much that the Topo, which I think is also great looking, followed close behind.
:iagree:I like the topo for more than just blade. I also like the subtle green/black combo. If I could get a spare topo blade, I would gladly put it on the blue one.
How would you feel about swapping the topo blade onto bluey? :dd:
(https://live.staticflickr.com/65535/51203200308_f73674922e_4k.jpg) (https://flic.kr/p/2m1DMyq)20210525_161541A (https://flic.kr/p/2m1DMyq) by Chako (https://www.flickr.com/photos/187039850@N04/), on Flickr
(https://live.staticflickr.com/65535/51203770079_60a006b6d8_4k.jpg) (https://flic.kr/p/2m1GGW4)20210525_161719A (https://flic.kr/p/2m1GGW4) by Chako (https://www.flickr.com/photos/187039850@N04/), on Flickr
(https://live.staticflickr.com/65535/51204061820_458d9eb31e_4k.jpg) (https://flic.kr/p/2m1JcE5)20210525_161732A (https://flic.kr/p/2m1JcE5) by Chako (https://www.flickr.com/photos/187039850@N04/), on Flickr
(https://live.staticflickr.com/65535/51204061715_7cf59e39dc_4k.jpg) (https://flic.kr/p/2m1JcCg)20210525_161753A (https://flic.kr/p/2m1JcCg) by Chako (https://www.flickr.com/photos/187039850@N04/), on Flickr
Congrats :cheers: Great color and a nice find :salute: :like:
:pok: :pok: you need them all :pok: :pok:
:iagree: :D
I love the one I have (the TOPO version) but have really looked hard at both of the ones you have :dd: :like:
:nanadance: :nanadance:
:oAgree. I like that green color but all of them I’ve seen are darker green.
The green seems brighter, must be the light?
Thanks kindly.Nice selection. I have two also (Topo and Aqua), but the gray is really calling to me.
A day later and I have two in my possession. The second was an eBay purchase and ~80 USD so a pretty good deal. Came boxed and essentially brand new. Not my favorite color but I do like the tool quite a bit. As mentioned may end up with a third, but trying not to emulate @chako too much here.
The Aqua is my favorite colour. Happy to see you have one.The Aqua is really cool. In some pictures I saw it looked darker, almost turquoise, which I was hoping it was, but I still love it.
:pok: :pok: you need them all :pok: :pok:
:like:
Thats a terrific picture.
How’s the handle splay with the Signal?I understand what you mean. Before trying, because of the similarities with the Skeletool, I was afraid the splay would be too wide. It is wider than the Rebar but still narrow enough for my medium size hands.
I’m kinda used to “smaller” tools like the Rebar so I’m not sure if I can still have a workable grip on tools with wide splay (ie experience with Wingman/Sidekick).
(https://i.imgur.com/qqUrUXCh.jpg)
Thanks Sos! Thanks Poncho!
:hatsoff:
I have to admit that I didn’t expect the Signal to be “Rebar-size”. I always thought it was bigger due to the price tag. (1 Signal outside its base color can cost as much as 2 Rebars with leather sheath here)
Sweet pic !
Yellow accessories? I thought the coyote version had black?
Oh wow :drool: That is an excellent looking Signal :o :dd: :like: :like:
Thanks; yes, it is! :multi: :like:
(Although, if only the Topo was still available...)
It is. I just ordered one from REI.
It is. I just ordered one from REI.
It is. I just ordered one from REI.
[ This attachment cannot be displayed inline in 'Print Page' view ] No :oops: needed; glad you tried to help! :salute: :cheers:
Well, the reason for not gettin' the Topo Signal (right now) arrived... here's my new "Robin's Egg" Signal!
:mail: :woohoo:
Still wondering about the logo, as the one on the "RE" appears like printed/screened, and subdued, no matter the lighting or lighting angle; the "CT" one has crisp, clear lettering (the "registered" symbol is easy to read in this one) and, like I said before, appears like shiny/polished on certain light angles. Guess I'll have to get the Topo to find a definitive answer ... [ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ] (No, I will not write to Leatherman and ask; leave me alone! :rant: :rofl: :rofl:)
[ This attachment cannot be displayed inline in 'Print Page' view ] No :oops: needed; glad you tried to help! :salute: :cheers:
Well, the reason for not gettin' the Topo Signal (right now) arrived... here's my new "Robin's Egg" Signal!
:mail: :woohoo:
Still wondering about the logo, as the one on the "RE" appears like printed/screened, and subdued, no matter the lighting or lighting angle; the "CT" one has crisp, clear lettering (the "registered" symbol is easy to read in this one) and, like I said before, appears like shiny/polished on certain light angles. Guess I'll have to get the Topo to find a definitive answer ... [ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ] (No, I will not write to Leatherman and ask; leave me alone! :rant: :rofl: :rofl:)
Thanks, Poncho!; so, maybe a production change then.
:hatsoff: :cheers:
OOOOPPPSSSS...REI no longer has the Topo in stock!!!!! :facepalm: :facepalm: :facepalm: :bnghd: :bnghd: :bnghd:
:ahhh :ahhh :ahhh
:nanadance: :nanadance:
You guys and your Signal porn. I would have been stuck in analysis paralysis forever, except for two things. First, my wife green lighted the purchase because my birthday is coming up :nanadance: But the choices...Topo, Coyote, stainless and blue... Then I got a BassPro 10% email, used my points, and I could pick it up at the store!!! Decision made., and that calls for a double :nanadance: :nanadance:
(https://i.ibb.co/hRCRprc/IMG-7815.jpg)
You guys and your Signal porn. I would have been stuck in analysis paralysis forever, except for two things. First, my wife green lighted the purchase because my birthday is coming up :nanadance: But the choices...Topo, Coyote, stainless and blue... Then I got a BassPro 10% email, used my points, and I could pick it up at the store!!! Decision made., and that calls for a double :nanadance: :nanadance:
(https://i.ibb.co/hRCRprc/IMG-7815.jpg)
Yes sir it is. I'm liking it. Now I'm wondering why I waited so long to get one! :think: :D
OOOOPPPSSSS...REI no longer has the Topo in stock!!!!! :facepalm: :facepalm: :facepalm: :bnghd: :bnghd: :bnghd:
[ This attachment cannot be displayed inline in 'Print Page' view ]
Finally, my Steel Signal have arrived!
[ This attachment cannot be displayed inline in 'Print Page' view ]
Good to have the Signal back on the belt today!That's a cool-looking blade! :like:
:iagree: Y'awl are making me want a Signal, too. >:D
MTO fuels the addiction.Indeed it does.
Finally, my Steel Signal have arrived!
[ This attachment cannot be displayed inline in 'Print Page' view ]
Are tree stabbing pics frowned on or outright not allowed here? Thought will check before I post.
Sent from my iPhone using Tapatalk
Great pic, David :like:
I wouldn't frown upon it :shrug: :D
Got to take my Topo on a recent hike.:like:
TOPO :woohoo:
(https://i.imgur.com/zDjtIDFh.jpg)
(https://i.imgur.com/LL2DkCbh.jpg)
Yes sir :salute: Busy busy these days, just took a few quick snaps.
My thoughts on the Signal:
Although it's a combo blade I do like the beefed-up thickness (good for outdoor chores). I can produce feather sticks with it without a problem.
The interlocking handles are a good idea making it a very solid handle unit when the knife or saw is used.
I find the whistle loud and clear too.
I did not try out the fire steel yet though.
Oh, and there's a clip and a carabiner to secure it on your gear or pocket etc. :tu:
It seems a good, sensible and solid outdoor package to me.
The awl could have a little more bite maybe.
Overall I love it :2tu:
(https://i.imgur.com/nda7iwo.jpg)
(https://i.imgur.com/Kbp9IG0.jpg)
(https://i.imgur.com/pnoa1xf.jpg)
(https://i.imgur.com/xv0ahEO.jpg)
My thoughts on the Signal:Your thoughts pretty much mirror mine. I would like to see a dedicated lanyard attachment point, though. And though I haven't tried the ferro rod either, I'd use it as a backup for a much larger one.
I would like to see a dedicated lanyard attachment point, though.
TOPO :woohoo:
(https://i.imgur.com/zDjtIDFh.jpg)
(https://i.imgur.com/LL2DkCbh.jpg)
You could use the hole in the pocket clip...Why didn't I think of that? I'll pull the Signal out and try to pass some 550 through that hole. Thanks for the idea!
Your thoughts pretty much mirror mine. I would like to see a dedicated lanyard attachment point, though. And though I haven't tried the ferro rod either, I'd use it as a backup for a much larger one.
Some very nice pics, Stitchy :drool: thanks for those :salute: :like: :like:
You could use the hole in the pocket clip...
Thanks, Poncho; I can still cut using the regular cutters but nothing like coathangers; no worries though as replacements are on the way! :doh:
I don't believe they have been for a long while :think:
i thought the 154cm were more likely to chip?
:dd: so nice :o :ahhh :like:
Went on a hike today exploring a new area.
Had the Signal with me of course :salute:
(https://i.imgur.com/1yokVGq.jpg)
(https://i.imgur.com/6VGdtjH.jpg)
(https://i.imgur.com/876Kzzd.jpg)
(https://i.imgur.com/yL97vVx.jpg)
Went on a hike today exploring a new area.
Had the Signal with me of course :salute:
(https://i.imgur.com/1yokVGq.jpg)
(https://i.imgur.com/6VGdtjH.jpg)
(https://i.imgur.com/876Kzzd.jpg)
(https://i.imgur.com/yL97vVx.jpg)
Well, here's the CT Signal, almost as good as new ( If I could only touch up the oxide coating ...). Also the cutter on the left is the chipped one ( reminds me of the Gerber's). [ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ]Those Gerber triangles are the worst! they cost like $20 and when they break they shatter and you rarely get to use all 3 sides first
Those Gerber triangles are the worst! they cost like $20 and when they break they shatter and you rarely get to use all 3 sides first
Well, here's the CT Signal, almost as good as new ( If I could only touch up the oxide coating ...). Also the cutter on the left is the chipped one ( reminds me of the Gerber's). [ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ]
The land of mist and magic. Looks like a beautiful hike!
I hope the wire cutter chipping is not becoming a new feature on Leathernans :-\
Naaaah, I'm sure its not; probably more of "user error" than manufacturing. :facepalm: :oops:
I hope the wire cutter chipping is not becoming a new feature on Leathernans :-\
Peek a boo ... [ This attachment cannot be displayed inline in 'Print Page' view ]
(https://uploads.tapatalk-cdn.com/20220623/4a8c177a65949e1a23a3b7d922a35b47.jpg)
I got a Signal.
:woohoo:Wow!
(https://i.imgur.com/U6cYEGch.jpg)
(https://i.imgur.com/P2ibgPNh.jpg)
(https://i.imgur.com/SOK35tTh.jpg)
(https://i.imgur.com/VuSgsD3h.jpg)
Hey guys, Question. About to modify my signal to add scissors, but also want to add a scalpel. Has anyone tried purchasing the Countycomm scalpel and disassembling with intent to add it to your signal? Thoughts? https://countycomm.com/products/carbon-fiber-folding-craft-scalpel-knife
I'm thinking of getting yellow whistle + ferro and diamond file, and dye them orange, that would look cool on the coyote/tan colour... I've read the Ferro can be "popped" out, but I feel I'll break it ???
I may have slipped.
Signal Set...(https://uploads.tapatalk-cdn.com/20230326/00a914670377c6b5ef1e447ea5f39665.jpg)
Sent from my SM-G980F using Tapatalk
Can anyone help. I’m thinking of buying a Signal but I’ve noticed that in some of your pictures the the black oxide coating is starting to come off in the pliers or blades.
For those of you with the black tooled versions have you experienced any issues with this?
You will have to make peace with the way black oxide wears if you want to buy black oxide tools :salute: some of the plier heads rub and some don't :shrug: black oxide will wear off some no matter what on a tool but they gain character as they are used and age :cheers: once you get past that (some never do) then you won't see it as a bad thing :D :tu:
Thanks for the replies. It’s not the general wear that bothers me it’s the scraping patterns the tools make. I think I’ll go with one without black oxide on.
Chess for that. I have some Leathermans already but none with black oxide. I fully appreciate and expect some wear in places. I think I’ll stick with just steel ones. A colbalt blue Signal is now top of my wish list.
Nice one; love the color, and it's not seen often! Do post pictures of it when you get it... :tu: :like: :popcorn:
(https://i.imgur.com/9rbK7S4.jpg)Awesome
:)Nice
Excellent pic, David :woohoo: :like: :like:Thanks, Poncho. I'm pretty sure my mods voided the warranty. I'll pull the trigger on eBay if someone sells it at a reasonable price.
Gotter, I hope you can find a replacement screw but you may have to either send it in for warranty or try and buy a replacement on ebay :dunno:
Found these as a set; hope it helps: https://www.ebay.com/itm/186301203754?itmmeta=01HRK8Z4FZ7Q863EV79NMCEMSN&hash=item2b606ac52a:g:zLsAAOSwwb9isMAH&itmprp=enc%3AAQAIAAAAwKukewrjUrLQtN2e5bCfWitcd0AXS54SQQarPUuY4FeWu2aWhdKKunK7df%2FfELs9oNtgrnKycBiKS7yF05SRbz%2BAo5J5F%2Bnolicbtkl2tltrSY2Y2T4VjnWULBdp8DMftjiDRDNn6DcNouulFQFzFm8jyRXc2DCcZFIDvfVbhZdaH3xFTPuhWWQpo84OC2q5caucmt%2B7CNoTVGqTmBoGPH4kEzhval%2Bv3I9s9P4ho1mGS%2BQOVwwXRLL0roje5ubspA%3D%3D%7Ctkp%3ABk9SR4TI_OjEYwThanks, Juan. I saw those, too. I just can't pull the trigger on one small bolt for $25+. :-\
And these in black oxide:
https://www.ebay.com/itm/186301213143?itmmeta=01HRK8Z4FZKRMX2J5JCPY3Y8T6&hash=item2b606ae9d7:g:nJgAAOSw71NiVgrl&itmprp=enc%3AAQAIAAAA4C1G7AAlC%2B9bQCoOIaR8y8y1xZieCtTcRrN5umGwM51SwVwmKBNlaZVeZFszDV4qXj3pEgxlO%2BHgRXrD5eE8F9sHU5%2BwSIuGjkMyR6hKUv3e2NauYgPq4Lt7%2FCBKnPIhpy%2BCRHyQP6%2B7FIsw6lsSX%2F1Xmh1GGtX%2Bhi7CwpgkvR1q%2BRh8fFNAjOpfIOzuFYSp32WhD%2FTdbrD34pAkoC5Mm0TRnTsDTxsfMkmblFTvGYEM0f6ORKv%2BUH5%2B3Des9Fj%2BodzAa3GIj02E3%2FEm3ehEtt%2BpnREop2ClRwYAZmHD2drd%7Ctkp%3ABFBMhsj86MRj