Multitool.org Forum
Trade Forums => Multitools for Sale => Topic started by: ThePeacent on March 11, 2018, 04:27:09 PM
-
hey folks,
got so much stuff that I don't use that maybe would be better at someone else's hands and give me back some funds a bit needed now :ahhh
all are used or worn and have wear marks but nothing broken or useless unless I point so. Postage is 13.95 € for anything 100-500g (3 ounces to a bit over a pound), more weight is more expensive.
Ask for pics of what might interest you and any questions or other info just PM me :salute:
I also have sheaths from the brands and other companies that might fit, one tool gets you one sheath :tu:
Thanks a lot!
Victorinox Champion - 25€
Victorinox Handyman - 25€
Victorinox Swisschamp - 30€
Victorinox Mountaineer - 10€
Victorinox Explorer - 15€
Victorinox Cigar cutter - 30€
EGO A01 - 10€
LM Squirt S4 Blue - 15€
LM Squirt P4, Grey - 15€
LM Micra - 10€
LM Kick - 15€
LM ST300 - 30€
SOG PowerPlier - 40€
SOG Blacktip - 40€
Gerber MP600 BN Carbide Cutters - 30€
Gerber MP700 - 40€
LM Core (modded, lacks one of the pivots and has a Phillips screw instead, this tool is pretty worn and has abundance of wear and marks) - 20€
edged tools:
KaBar Piggyback Folder - 10€
Ontario Utilitac II Tanto SE - 15€
Cold Steel Swift - 50€
Cold Steel Hold Out I (AUS-8, SE) - 50€
Cold Steel Hold Out I (AUS8, PE) - 50€
Cold Steel Hold Out I (CTS-XHP, PE) - 70€
Cold Steel X2 Voyager, SE - 60€
Cold Steel Ti-Lite VI, Zytel Handles, AUS8 - 40€
Spyderco Resilience - 20€
Spyderco ARK - 35€
Spyderco Rock Salt - 120€
lights:
Sunwayman C44 - 10€
2000 Lumen 3x CREE XM L2 light - Pink - 2, 18650 batteries - 5€
-
Hey Tp! Do you ship international?
-
Interested in the Blacktip
Do all tools lock into place?
-
Interested in the Blacktip
Do all tools lock into place?
Lol.. Great minds think alike........
-
I been looking for a ti lite 6
-
ThePeacent, I sent a PM interesting in Vic Explorer, Can you pm me please?
-
Sam Lim was first.
And on second thought, I really should stick to Swiss made stuff.
Good luck Sam!
-
Yes Sam, I ship everywhere :tu:.
PMs replied for y'all,
tomorrow I'll post some pics of the suspects for you, now it's late in the night :ahhh
and Kampf if you get the Ti-Lite I'll give you another Ti-Lite VI with it :salute:
-
Leatherman Core and micra please Mr P :salute:
-
Sam Lim was first.
And on second thought, I really should stick to Swiss made stuff.
Good luck Sam!
;) that is so sweet of you.
-
Pm sent! :)
-
Leatherman Core and micra please Mr P :salute:
sending PM in brief time
as a side note, the Explorer is called for but I've got another one, much more worn out, in case there's some interest for it.
These are the two SAKs, the one with clear glass case is the one reserved for the moment
(https://i.imgur.com/NJoxLSc.jpg)
(https://i.imgur.com/8H6OZfu.jpg)
(https://i.imgur.com/J1EHlhy.jpg)
the worn out shield is the one in the grey mag Explorer
(https://i.imgur.com/a0rohic.jpg)
The tools are fine on both, with wear marks, all functional though.
(https://i.imgur.com/rbBpuKo.jpg)
The blade is very stiff to open on the clear glass one, it came that way to me, and the back tools have very strong springs too:
(https://i.imgur.com/oxP8c5H.jpg)
(https://i.imgur.com/7n45TOi.jpg)
(https://i.imgur.com/UMF8Nup.jpg)
In the grey Explorer everything is much more easy to open and the blades are worn quite a bit, needing a proper sharpening:
(https://i.imgur.com/xDCSmNr.jpg)
(https://i.imgur.com/1e7Yszz.jpg)
(https://i.imgur.com/tAIz1G1.jpg)
-
Micra and Core are sold and shipped,
:tu:
-
Blacktip and Cold Steel Swift are on their way to the new owners! :)
-
Ok, that solves my dubio for me :D
:rofl:
-
Ok, that solves my dubio for me :D
:rofl:
I dun get the "dubio" part.. What that? Some kind of lingo?
-
Ok, that solves my dubio for me :D
:rofl:
I dun get the "dubio" part.. What that? Some kind of lingo?
Being in doubt.
One part says yes, the other says no.
-
Ok, that solves my dubio for me :D
:rofl:
I dun get the "dubio" part.. What that? Some kind of lingo?
in dubio is the Latin way of saying "in doubt"
Used on many expressions, such as "in dubio pro reo" (in case of doubt, favor the accused)
also, BUMP!
10% off of anything left :salute:
-
Ok, that solves my dubio for me :D
:rofl:
I dun get the "dubio" part.. What that? Some kind of lingo?
Being in doubt.
One part says yes, the other says no.
Oh I get it. In dubio = In limbo.. :cheers:
-
I'll take one of the Explorers please
Is the newer one gone? Or are both still available? - How much to ship to Oz?
Please PM me Mr. Peacent - Tnx :tu:
-
firt of all, thanks to eveerybody who chimed in.
Secondly, I have new items to part with
Cold Steel OSS with botched sheath :ahhh - 30€
Cold Steel Recon 1 XL Tanto - Limited edition Tan G10 + DLC Black Blade - 60€
Cold Steel Desperado, SE - 60€
CRKT Hissatsu, Tan Color - 35€
CRKT Minimalist Bowie - 15€
CRKT Minimalist Wharnie - 15€
Wenger Traveler - 10€
Wenger EVO S52 - 25€
and posting ARK pics per request,
(https://i.imgur.com/UT98DKt.jpg)
(https://i.imgur.com/n0V40x9.jpg)
and sheath
(https://i.imgur.com/7QbQXtm.jpg)
(https://i.imgur.com/hvSd3EB.jpg)
:salute:
(https://i.imgur.com/Izf4HcM.jpg)
-
That Evo S52 is quite a deal...
:facepalm:
Someone buy this guy's toys!!
-
:ahhh :ahhh :ahhh :ahhh
More Cold Steels!!!
And no money to spend :rant: :rant: :rant:
-
Mountaineer, Handyman, CRKT Minimalist sold!
Thanks guys :like:
-
Hi! Spyderco Rock Salt pics?
Inviato dal mio S60 utilizzando Tapatalk
-
Hi! Spyderco Rock Salt pics?
Inviato dal mio S60 utilizzando Tapatalk
yes sir! :salute:
(https://i.imgur.com/y8thvTI.jpg)
(https://i.imgur.com/xcBmcBw.jpg)
next to PX for size
(https://i.imgur.com/EO4XPUi.jpg)
(https://i.imgur.com/I9Z3HtA.jpg)
-
What a smurf knife!!! :drool: :drool: :drool: :drool:
-
Hi! Spyderco Rock Salt pics?
Inviato dal mio S60 utilizzando Tapatalk
yes sir! :salute:
(https://i.imgur.com/y8thvTI.jpg)
(https://i.imgur.com/xcBmcBw.jpg)
next to PX for size
(https://i.imgur.com/EO4XPUi.jpg)
(https://i.imgur.com/I9Z3HtA.jpg)
Oh my goodness.... :ahhh
-
What a beast!
Sent fra min FRD-L09 via Tapatalk
-
hey folks
ARK is sold,
and I post pics of the PowerPlier per request:
(https://i.imgur.com/Z7lMOBH.jpg)
(https://i.imgur.com/4VcmuqW.jpg)
(https://i.imgur.com/xvwlKyI.jpg)
the wear on the drivers is obvious, they have scratches and very small rollings/dents, nothing that 2 min on sandpaper won't make disappear.
The edge is very sharp but extensively used,
(https://i.imgur.com/e5rthxC.jpg)
(https://i.imgur.com/QVEYV7P.jpg)
(https://i.imgur.com/ISNG5nv.jpg)
same with the pen blade (small) edge, but can be brought to shaving sharp in few minutes
(https://i.imgur.com/dGFE7es.jpg)
file has wear but still bites and is totally functional
(https://i.imgur.com/lh4oISa.jpg)
has paint marks on the plier jaws, inside section, I suppose can be removed with acetone/adhesive remover or other means (pic below)
(https://i.imgur.com/b9Phiz8.jpg)
and the teeth/grabbing pattern is worn but not a lot
(https://i.imgur.com/foMLSxF.jpg)
thanks all!! :salute:
-
BUMP!
And new prices for all articles left, 20% off of their original price (in the first post) :tu:
also adding:
- Vic OHO Soldier, a bit chipped rubber scales, 10€
- Vic Rambler, 8€
- LM Micra, Blue scales, 8€
ask for anything you know or think I have and you might be interested in, I could get you a good price on that! :salute:
-
Wait for few days, I didn' won this week euro jackpot :rofl: :facepalm:
Then I will buy half of your's collection :rofl: :rofl: :rofl:
You have a great sale? :think:
-
- Vic OHO Soldier, a bit chipped rubber scales, 10€
- LM Micra, Blue scales, 8€
Yes please Mr P :salute:
:whistle:
-
- Vic OHO Soldier, a bit chipped rubber scales, 10€
- LM Micra, Blue scales, 8€
Yes please Mr P :salute:
:whistle:
I'll get you some pics, so you can see the scales' condition
here ya go:
(https://i.imgur.com/Z8BfZBG.jpg)
(https://i.imgur.com/eORUoSa.jpg)
(https://i.imgur.com/IGUWOEW.jpg)
(https://i.imgur.com/hbcloQP.jpg)
(https://i.imgur.com/Ujkhz44.jpg)
Tools
(https://i.imgur.com/vw5K9oG.jpg)
(https://i.imgur.com/CD0yW7p.jpg)
blade is lightly used
(https://i.imgur.com/aTnjgWl.jpg)
The Micra is slightly worn and used but nothing out of the normal, like the last one. :salute: so you get an idea
-
Blue Micra, Kick, OHO Soldier, BlackTip, have all been sold and shipped.
Thanks to you all!!! :salute:
-
What's that EGO A1? How Chinese is it?
-
is the gerber mp 600 the bladeless version and would you ship to the uk?
-
What's that EGO A1? How Chinese is it?
I think a quick internet search (or WeAllJuggleKnives' Youtube review) will bring more light and info that I could put on here. It's basically an Oversized Swisschamp that is above the quality usually found on Chinese SAKalikes and clones,
This is I believe their biggest model :salute:
-
is the gerber mp 600 the bladeless version and would you ship to the uk?
I would ship to the UK no problem
It's a Blunt Nose, Carbide Cutter model with a blade :tu:
-
Swisschamp and another Handyman are taken,
I'll post some pics of the MP600 tomorrow as nowmy connection is too slow,
some people asked for the pics. :tu:
Also, please PM through the forum and not private mail as I see these here more easily and often :salute:
-
MP600 pics :salute:
(https://i.imgur.com/4mHg40O.jpg)
(https://i.imgur.com/pH0rLG9.jpg)
(https://i.imgur.com/fZXrPwQ.jpg)
(https://i.imgur.com/Zt82MDx.jpg)
-
Hi, how much to ship the MP600 to the UK :)
-
Hi, how much to ship the MP600 to the UK :)
11-14 Euro most likely, can give you an exact price tomorrow :tu:
but I have somebody on the queue for it!
I'll let you know if he finally takes it :salute:
-
I'm interested in the Resilience.
Sorry, didn't notice the postage price
-
Hi, how much to ship the MP600 to the UK :)
11-14 Euro most likely, can give you an exact price tomorrow :tu:
but I have somebody on the queue for it!
I'll let you know if he finally takes it :salute:
Many Thanks
-
Hi, how much to ship the MP600 to the UK :)
11-14 Euro most likely, can give you an exact price tomorrow :tu:
but I have somebody on the queue for it!
I'll let you know if he finally takes it :salute:
Many Thanks
it's free now, not the model the buyer wanted :salute:
-
Hi, how much to ship the MP600 to the UK :)
11-14 Euro most likely, can give you an exact price tomorrow :tu:
but I have somebody on the queue for it!
I'll let you know if he finally takes it :salute:
Many Thanks
it's free now, not the model the buyer wanted :salute:
Did you get an exact postage price ?
cheers
-
Hi, how much to ship the MP600 to the UK :)
11-14 Euro most likely, can give you an exact price tomorrow :tu:
but I have somebody on the queue for it!
I'll let you know if he finally takes it :salute:
Many Thanks
it's free now, not the model the buyer wanted :salute:
Did you get an exact postage price ?
cheers
Cheers payment made :cheers:
-
Hi, how much to ship the MP600 to the UK :)
11-14 Euro most likely, can give you an exact price tomorrow :tu:
but I have somebody on the queue for it!
I'll let you know if he finally takes it :salute:
Many Thanks
it's free now, not the model the buyer wanted :salute:
Did you get an exact postage price ?
cheers
Cheers payment made :cheers:
Got it!
But I need your address and info :pok: :D. PM me :salute:
-
The LM Micra in the OP is gone, correct?
Do you still have the LM Squirt S4?
I'll shoot you a PM with my details to have the final price including shipping.
Sent from my Mi A1 using Tapatalk
-
hey folks,
got so much stuff that I don't use that maybe would be better at someone else's hands and give me back some funds a bit needed now :ahhh
all are used or worn and have wear marks but nothing broken or useless unless I point so. Postage is 13.95 € for anything 100-500g (3 ounces to a bit over a pound), more weight is more expensive.
Ask for pics of what might interest you and any questions or other info just PM me :salute:
I also have sheaths from the brands and other companies that might fit, one tool gets you one sheath :tu:
Latecomer here. Still selling ?
I'll take the Squirt P4, the ST 300, the MP600 and the Resilience, if they are still available (not sure if the MP600 finally left or not) Would you kindly consider doing a bundle price for those ?