Multitool.org Forum
Tool Talk => Edged Tools => Topic started by: SteveC on June 28, 2021, 06:26:18 PM
-
Let's see them :tu:
(https://i.imgur.com/d8n7vw0.jpg)
-
Linnemicarta. (https://uploads.tapatalk-cdn.com/20210628/2f46cc7accfe0778a7133fec102a8888.jpg)
Skickat från min SM-G960F via Tapatalk
-
Linnemicarta and G10.(https://uploads.tapatalk-cdn.com/20210628/7cd775f140733a04581872e3433abcf8.jpg)
Skickat från min SM-G960F via Tapatalk
-
Very nice seved ! :like:
-
Thank you :D
Seved
-
Here are a bunch of Micarta handled knives;both linen and paper.
#1 & #2 A WWII era theatre knife.
#3 Marked only 61707;a very nice drop point hunter.
#4 An Al Mar S.E.R.E. folder.
-
#1 & #2 An unmarked tri-corner dagger.
#3 & #4 a custom slide blade dagger marked,"EL" inside a circle and,"Z3" in smaller letters with ivory paper Micarta handles.
-
#1Frederick Remington United States Cutlery with etched blade.
#2,#3, Khyber folders in three different sizes.
-
#1 Gerber Paul 2PM with ivory paper Micarta handles.
#2 United States Cutlery Mountain Shadow. lockback.
#3 Walsh custom dagger with ivory Micarta handle.
#4 Zalesky drop point hunter;my first custom knife.
-
#1 & #2 A Kershaw Golden Eagle limited edition knife.
-
Good knives and pics everyone! Didnt catch this in time for this week. Sooooooooooo there's always next week. :D
-
Good knives and pics everyone! Didnt catch this in time for this week. Sooooooooooo there's always next week. :D
:iagree: :like:
-
:hatsoff:
(https://i.imgur.com/l4dTtga.jpg)
-
:like: :tu:
-
(https://i.imgur.com/Ub022ta.jpg)
-
Oh, does the Farm & Field Bullnose have micarta handles? :like:
-
GEC Bull Nose with Red Micarta
-
GEC Bull Nose with Red Micarta
I'll take that as a yes :like:
-
Oh, does the Farm & Field Bullnose have micarta handles? :like:
OD linen Micarta
-
I'll take that as a yes :like:
Yes! Most have been made with Micarta. There were orange and black Delrin, Nifebrite and Tortoise Acrylic and a Osage Orange that I know of.
-
A few more from the accumulation:
#1 Benchmark Argonaut designed by Blackie Collins.
#2 Benchmark Rolox;another Blackie Collins design.
#3 Al Mar folder with ivory paper Micarta handles.
#4 Frank Centofante tribute knife by CRKT.
-
Another four and there ain't no more.
#1 A double bladed fish knife that can be disassembled for cleaning.The scaler teeth face in opposite directions and the curved area is extremely sharp.
#2 Stamped,"L.J.M." the large fullered double edge blade has rings of Micarta interspersed with aluminum.Came out of a huge collection of militaria and I believe it was a WWII theatre knife.
#3 An unmarked dagger with unusually colored Micarta rings for the handle.
#4 A Kinfolks throwing knife
-
OD linen Micarta
Yes! Most have been made with Micarta. There were orange and black Delrin, Nifebrite and Tortoise Acrylic and a Osage Orange that I know of.
Thanks guys. Oh, and I didn't know Nifebrite yet :ahhh
-
What a collection Ray :2tu:
The Benchmark Rolox is a curious design.
I think I wouldn't want to have it accidently opening in my pockets :ahhh
-
What a collection Ray :2tu:
The Benchmark Rolox is a curious design.
I think I wouldn't want to have it accidently opening in my pockets :ahhh
I don't think that is as big an issue as having it close while you are working with it. Some time ago I did a post on this knife showing it's deficiencies. The concept was by one of the great knife designers of our time;the late Walter,"Blackie" Collins.
Blackie;along with his brother Michael who was a fantastic scrimshaw artist as well as a custom knifemaker were responsible for many of the innovations on modern production knives. This one;in my opinion was probably the worst design he ever did.
Essentially the way it works is you press down on the serrated button on the top of the knife and that elevates the point.Pushing forward on the button moves the blade to the open position and the point drops locking the blade open.
To close,you depress the lock bar(on the bottom of the handle) and pull up on the blade allowing it to slide to the rear and into the locked close position. It can be a bit awkward to operate until you get the hang of it. It is NOT a one hand opener by any means.
The problem lies in the fact that if you are attempting to do any heavy cutting(such as dismembering heavy cardboard)and putting heavy downward pressure on the handle your small finger rests right on the lock bar and can easily trigger the lock. This results in the blade sliding backward rather handily and trapping the flesh between you thumb and forefinger between the sharp back edge of the blade and the frame.(DO NOT ask how I know this!)
Here are the pictures showing the operating sequence.
The pictures shown are of a wood handled Rolox that I bought new.The Micarta handled version I got in a trade.They were not cheap knives when new;in the 1980's they were about $65 US for this model. They also had a slightly smaller version and ones with stag handles.
-
Aha, so a simple push onto it is not enough to deploy it. It needs a push forward as well :tu:
The un-lock button position is unfortunate though :facepalm:
:cheers:
-
(https://i.imgur.com/yrKWYR0.jpg)
-
Happy WHW!
-
Happy WHW!
:rofl: you must be having a good time on vacation ;)
It's MM :D
-
Happy MM ! :cheers:
(https://i.imgur.com/DXJzFwh.jpg)
-
Wow, you mean I actually lucked out and carried the right knife on the right day 'o the week for once?
Cool! Rust Red Micarta Weaver Jack
(https://live.staticflickr.com/65535/51322163734_1dee37bc81_h.jpg)
-
:like: :tu:
-
:rofl: you must be having a good time on vacation ;)
It's MM :D
I guess so. I just now noticed this a week later. :ahhh :doh: :D
-
Good knives for MM Steve and Terry! :tu:
-
:hatsoff: :cheers:
(https://i.imgur.com/apQjQFr.jpg)
-
Couple sweeties for M2
-
:hatsoff:
(https://i.imgur.com/TpeFRyd.jpg)
-
:hatsoff:
(https://i.imgur.com/TpeFRyd.jpg)
:tu: :like:
-
8)
(https://i.imgur.com/QYE8cRY.jpg)
-
Good choice for M2! :like:
-
Possum Skinner and a Bull Nose for M2
-
Sweet ! :like:
-
ESEE with Micarta scales.
(https://live.staticflickr.com/65535/51368288226_e5399b155c.jpg)
-
Nice Trio FB ! :like:
-
Buck 124 Frontiersman.
-
ESEE with Micarta scales.
Very nice trio FB! :like: :tu: :tu:
-
Buck 124 Frontiersman, my favorite large knife. :D
-
Buck 124 Frontiersman.
:tu:
-
Thank you SteveC and Vicman! :cheers:
-
Mustang for M2
-
Nice one for MM ! :like: :tu:
-
Moki Blakiston´s Fish Owl in black micarta, limited edition with abalone inlays.
This owl actually exists, it´s the largest living species of owl today https://en.wikipedia.org/wiki/Blakiston%27s_fish_owl
-
Nice one Ron ! :like:
-
Thank you Steve :cheers:
-
Wow, you mean I actually lucked out and carried the right knife on the right day 'o the week for once?
Cool! Rust Red Micarta Weaver Jack
(https://live.staticflickr.com/65535/51322163734_1dee37bc81_h.jpg)
Now that is flat out SEXY!!!!
-
Nice knives David and Ron.
This is a Randall Fireman,it's a non-catalog item.
It's a very stout knife whose blade is 1/4" thick and 4 1/4" long.It's made from SS and has a black micarta border patrol handle.
-
Stout looking knife Ray ! :like:
-
Eureka Jack
(https://i.imgur.com/bdn2c5q.jpg)
(https://i.imgur.com/GOiL8xX.jpg)
-
Stout looking knife Ray ! :like:
Thanks Steve. Randall states the Fireman has 3/8" tang that runs through the handle.
Your Jack looks like a modified Sway Back.
-
Stout looking knife Ray ! :like:
:iagree: 8)
-
Now that is flat out SEXY!!!!
Thanks! :hatsoff:
-
Eureka Jack
(https://i.imgur.com/bdn2c5q.jpg)
(https://i.imgur.com/GOiL8xX.jpg)
:tu: :like:
Moki Blakiston´s Fish Owl in black micarta, limited edition with abalone inlays.
This owl actually exists, it´s the largest living species of owl today https://en.wikipedia.org/wiki/Blakiston%27s_fish_owl
Nice! :tu:
-
:woohoo:
It's MM !
(https://i.imgur.com/WEpBX15.jpg)
-
:tu: :like:
-
Nice one Steve.That looks like burlap Micarta.
This is another Buck Collector's knife.
It has a S30V blade,nickel silver frame and Micarta handles with red liners.
BCCI stated this was green Micarta but for the life of me I only see brown Micarta.
-
:tu: :like:
-
I sure am enjoying your Buck collection TG!! Another beauty.
-
:tu: :like:
I sure am enjoying your Buck collection TG!! Another beauty
Thank you gentlemen.
-
Nice one Steve.That looks like burlap Micarta.
This is another Buck Collector's knife.
It has a S30V blade,nickel silver frame and Micarta handles with red liners.
BCCI stated this was green Micarta but for the life of me I only see brown Micarta.
Thanks and what a beauty that one is ! :dd:
-
It's MM again :D
(https://i.imgur.com/K69NNMK.jpg)
-
That's a nice clean looking knife Steve.
Is that a sheepsfoot or a hawkbill blade?
Here is a Tom Cute custom.Tom passed away several years ago but he left a small legacy of well made knives.
This is made in the "Loveless Drop Point" pattern.
It has a 3 1/2" blade w/tapered tang and made from mirror polished ATS-34, a favorite steel of Bob Loveless.
It also has a single N/S hilt and Tom used a black linen Micarta material with red liners for the handle.
-
(https://uploads.tapatalk-cdn.com/20210830/6535dc4797ac318264bda3c5b334713d.jpg)
Sent from my iPhone using Tapatalk
-
That's a nice clean looking knife Steve.
Is that a sheepsfoot or a hawkbill blade?
Here is a Tom Cute custom.Tom passed away several years ago but he left a small legacy of well made knives.
This is made in the "Loveless Drop Point" pattern.
It has a 3 1/2" blade w/tapered tang and made from mirror polished ATS-34, a favorite steel of Bob Loveless.
It also has a single N/S hilt and Tom used a black linen Micarta material with red liners for the handle.
GEC calls it a Ramsfoot
(https://i.imgur.com/3ctBFi7.jpg)
-
Buffalo Jack and a Buck 501
(https://i.imgur.com/WOiooUT.jpg)
-
Good pair of knives for M2! :like:
-
This is the first year for the Buck 112 Ranger.
It's referred to a C1-V1, which is Category 1 - Variation 1.
These were forged brass frames with Micarta scales with 2 small brass handle pins.
They also had a no nail nick blade,made from 440 SS and a reverse Buck USA stamp.
-
Buffalo Jack and a Buck 501
(https://i.imgur.com/WOiooUT.jpg)
Nice knives Steve.
I would usually refer to your Jack as a Gunstock Jack.
-
This is the first year for the Buck 112 Ranger.
It's referred to a C1-V1, which is Category 1 - Variation 1.
These were forged brass frames with Micarta scales with 2 small brass handle pins.
They also had a no nail nick blade,made from 440 SS and a reverse Buck USA stamp.
8) :like:
-
Nice knives Steve.
I would usually refer to your Jack as a Gunstock Jack.
It is a Gunstock Jack. GEC called this run of their Model 44 a Buffalo Jack because the Northfields had a bullet shield patterned after the 44-77 cartridge popular with bufflao hunters used.
-
This is the first year for the Buck 112 Ranger.
It's referred to a C1-V1, which is Category 1 - Variation 1.
These were forged brass frames with Micarta scales with 2 small brass handle pins.
They also had a no nail nick blade,made from 440 SS and a reverse Buck USA stamp.
:like: :tu:
-
Calf Roper
(https://live.staticflickr.com/65535/51464354047_278e76f0ca_k.jpg)
-
Got to love the Calf Roper one of the best Stockmans out there. :tu:
-
:iagree:
I don't know of another pattern that feels quite as "right" in my hand as the #66. There's something special about the feel of the paper Micarta on this one too. It's warm and very smooth, but not at all slippery. It's a similar feel to Delrin but classier.
The blade profiles are pretty much perfect too, but I'll admit that I'm starting to favor a slimmer profile clip-point blade for EDC.
-
Nice one Terry ! :like:
-
Oregon Trapper
(https://i.imgur.com/uQ1pGCW.jpg)
-
Nice knife for M2! :like: I really like the 43.
-
A Buck 110 with a D/P blade made from CPM-154.
-
Nice 110 TG! :like:
-
Calf Roper
(https://live.staticflickr.com/65535/51464354047_278e76f0ca_k.jpg)
Oregon Trapper
(https://i.imgur.com/uQ1pGCW.jpg)
Very nice guys.
-
Nice 110 TG! :like:
Thanks David.
I was just rummaging through my Buck collection and realized that I have dozens of micarta handled 110's and 112's.
-
Thanks David.
I was just rummaging through my Buck collection and realized that I have dozens of micarta handled 110's and 112's.
Be looking forward to seeing pics of them in the future. :tu:
-
Be looking forward to seeing pics of them in the future. :tu:
Sometimes it's hard to believe how much you accumulate over the years.
EEGADS!
-
Nice 110 tg ! :tu:
-
Possum and Mustang
-
Nice one buddy, I'm also carrying a Possum :like: :tu:
-
Eureka Jack and the Possum
(https://i.imgur.com/cmogYpM.jpg)
-
Good pairing with those two! :tu: :like:
-
Two possums.LOL Good ones men.
Where do these makers get their ideas for naming their knives.
This reminds me of a three knife set made by Case.They are Mini Copperlocks with engraved blades.One is a Buck,one is a Turkey and the last is a Muskrat. A Muskrat ? LOL
This a Case 54 Trapper with orange Micarta handles.
-
This is the Case display.LOL
-
TG :tu: :like:
-
TG :tu: :like:
Thanks David.
This is DLT special.
It's a Buck 110 Hunter with a N/S frame,S35VN D/P steel blade and green micarta handles.
-
Good one tg ! :like:
-
Buffalo Jack and a Ramsfoot in Linen and Canvas Micarta
(https://i.imgur.com/Cm1YmBB.jpg)
-
Buffalo Jack and a Ramsfoot in Linen and Canvas Micarta
(https://i.imgur.com/Cm1YmBB.jpg)
Those are awesome Steve.
They deserve an encore.
(https://i.imgur.com/Cm1YmBB.jpg)
-
Nice ones TG and Steve. :like:
-
Thanks David.
Buck 124 Frontiersman.
-
Thanks David.
Buck 124 Frontiersman.
Nice pic of the Frontiersman! :like:
-
Possum
-
Nice pic of the Possum ! :like:
Thanks David.
Buck 124 Frontiersman.
:like: :tu:
-
2AB
(https://i.imgur.com/f0X5mNv.jpg)
-
Really good pic of that nice Barlow! :tu:
-
Thanks ! :cheers:
-
Bull Buster
-
:like: :tu:
Viper
(https://i.imgur.com/EpZT1my.jpg)
-
:tu: :like:
-
Nice ones David and Steve.
This is a Randall Dealer Special known as a Buxton Fighter.
It has a 6.5" clip point blade with a full tang which is exposed on the top of the Border Patrol.
-
(https://i.imgur.com/kGVFZLy.png) !!!
-
Canvas and Burlap
(https://i.imgur.com/zG3WZRw.jpg)
-
MM yea!
This is a Custom Shop 110 with N/S frame,finger grooves and an S30V blade.
-
:woohoo: its M2! Good ones Steve and TG. :like: :like:
-
Nice ones fellas ! :like: :tu:
-
Lionsteel Warhorse
-
Nice one Nate ! :like:
-
Possum Skinner
(https://i.imgur.com/Dpp3cEs.jpg)
-
Good knives Nate and Steve.
I hope the picture posting issue if fixed.I'll give it a go.
Randall model 28 Woodsman.This has green micarta that has darkened over the years and appears almost black.
Edited:My pictures double posted and were too large.
-
My Newsiest one will be here Friday. I had the puzzle shield added because my son has Autism
-
Sweet looking knife and cool badge ! :like:
-
Nice looking knife DTL.
Who makes it? I can't make out the manufacturer.
Tell us a little more about it, like size,steel ect,
-
:woohoo: It's MM !
(https://i.imgur.com/Z1ehKin.jpg)
-
Very nice knife Steve.
I arrived home late last night and while listening to some music fell asleep.
Here's my contribution to MM.
-
:tu:
:woohoo:
(https://i.imgur.com/PgV3BKb.jpg)
-
Like that Bull Nose. :tu:
-
Buck Squire
-
Nice one Nate ! :like:
-
(https://i.imgur.com/PgV3BKb.jpg)
Buck Squire
Nice one Steve.
Hey Nate,nice little Squire.
This is a Randall Made Model 28 Woodsman.
-
Thanks tg and nice Randall ! :like:
-
Buck Esquire 501
This is an early one before the name change to Squire due to a lawsuit
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:tu: :like:
-
Nice Buck Steve.
Here's one that different,a Buck 106 ax with micarta handles.
-
:like: :tu:
-
:woohoo: It's MM
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:tu: :like:
-
Nice Steve.
This is a favorite 112.Even non-knife guys seem to like this Buck.
It's a BCCI limited edition with S30-V blade and canvas Micarta.
-
What's not to like ! :dd:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
This was a limited run with orange Micarta handles and a CPM-154 drop point blade.
-
:woohoo:. M2. Good ones Steve and TG! :like:
-
Case Copperhead
I’m not in love with the wharncliffe main blade (really prefer clip or spear), but it does make it easy to pinch open.
-
Nate :tu: I've become a big fan of the Wharncliff blade.
-
Nice one Nate ! :like:
-
:woohoo:. M2. Good ones Steve and TG! :like:
Thanks and likewise ! :cheers:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice! :like:
-
Nice one Steve.
This is a Buck 110 with green Micarta handles,satin finished N/S frame and an S35V drop point blade.
-
:like: :tu:
-
Another nice one TG! :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
You've got some lovely GECs! I love the colour of that micarta
Sent from my CPH2145 using Tapatalk
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
:tu: :like:
-
Possum and Mustang
-
Possum and Mustang
That red is beautiful!
Sent from my CPH2145 using Tapatalk
-
Nice knives for MM David ! :like:
-
We can always count on Steve and David to get MM off to a good start.
Kudos men!
I have to look back at what I've displayed in the past,as I've found myself reposting the same favorite knives.
Here is one that I haven't posted.
It's a limited Edition Buck 110 with a N/S frame,blue micarta,finger grooves and an S90V D/P blade.
-
Cool color on that that one tg ! :like:
-
Nice shade of blue and S90V. Impressive! :like:
-
Cool color on that that one tg ! :like:
Thank Steve,this color really does pops.
-
Nice shade of blue and S90V. Impressive! :like:
Thanks David.
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Great combo for the workin man! :tu: :like:
-
Nice swayback Steve.
This is an original Gerber Paul knife from the 1980's.They called this Ivory Micarta.
These pictures were taken in haste and I will take a few more when I have better light.
-
I took the opportunity to take some better shots of this Paul Knife.
This is one of the best pocket knives,which can be opened with one hand,that I've ever owned.
-
:like: :tu:
-
:tu:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:woohoo: Possum Skinner! Good choice. :like:
-
Bull Nose
-
I took the opportunity to take some better shots of this Paul Knife.
This is one of the best pocket knives,which can be opened with one hand,that I've ever owned.
That's a nice one TG! The ivory micarta sure has aged nicely. I remember the Pauls knife from back in the day. I kinda wanted one but never did buy one. :dunno: :D
-
If any of you like fidget friendly knives, I got one today that I am really stoked about. The Kizer Cormorant with Brown Micarta in 3V exclusive from White Mountain Knives. Played with this thing today almost as much as my 7 year-old has played with his Bat-Tech Batcave.
-
Good one pa ! :like:
-
:woohoo:
First MM of the year ! :cheers:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Do you have a little snow today Steve?
We had some snow,so I photographed this Case inside today.
This is a Case 6265 Folding Hunter with black canvas Micarta scales.
-
Not today, it's been to cold to snow :D
-
Not today, it's been to cold to snow :D
Our temps went from 61 yesterday to mid 30's today.
The snow last night was wet and slushy but easy to shovel.
-
I just checked the temp and it's 29.
Holy cow it fell 32 degrees overnight.
-
Today it warmed up to 27 but yesterday was
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:woohoo:
First MM of the year ! :cheers:
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice pair of GEC's for M2! :like:
-
Do you have a little snow today Steve?
We had some snow,so I photographed this Case inside today.
This is a Case 6265 Folding Hunter with black canvas Micarta scales.
TG :tu:
-
GEC Bull Nose
-
Nice Bullnose buddy ! :like:
-
Nice Bullnose buddy ! :like:
:iagree:
-
:woohoo: It's MM !
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:woohoo: It's MM !
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice pair of knives for M2! :tu:
-
Possum Skinner for M2
-
Very nice Steve and David. :tu: :like:
-
Thanks zman ! :cheers:
-
:ahhh Viper
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Good one for M2! :tu: I havent used my 47's much since Ive had them.
-
Viper,I like that name Steve.
I have a Viper but it was designed by Blackie Collins and manufactured by Benchmark.
I can't seem to find a picture of that knife.
-
MM ! :woohoo:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
MM ! :woohoo:
[ This attachment cannot be displayed inline in 'Print Page' view ]
Steve :tu:
-
Mustang
-
David :cheers: :tu:
-
I planned for MM this time
-
8) :tu:
-
I planned for MM this time
:like: :tu:
-
Maroon and OD Linen for MM!
-
Maroon and OD Linen for MM!
Sure is a nice pair for M2! :tu:
-
Bull Nose
-
:like: :tu:
.
-
:tu: :like:
-
I'm late,I'm late for a very important date. LOL
This is the new Buck 110 Hunter/Sport.
Aluminum take apart frame,micarta handles,pocket clip [removed] with S30V blade and thumb stud.
Altogether a very finely made and lightweight iteration, of the world famous Buck 110 hunter.
-
I can't believe I made it here before David or Steve.LOL
This is a Case 6265 with very nice black canvas Micarta handles.
I do like these bigger knives.
-
:like: Nice One!
-
:iagree: :tu:
-
Canvas Micarta
-
Nice knives for M2 Toolguy and Steve! :like: :like:
-
:like: Nice One!
:iagree: :tu:
Nice knives for M2 Toolguy and Steve! :like: :like:
Thanks guys.
-
Huckelberry and Mustang
-
:like: :tu:
'''I almost forgot to post today :oops:
(https://forum.multitool.org/index.php?action=dlattach;ts=1645465272;topic=10834.0;attach=531460;image
.)
-
:like: :tu:
'''I almost forgot to post today :oops:
(https://forum.multitool.org/index.php?action=dlattach;ts=1645465272;topic=10834.0;attach=531460;image.)
Better late than never. :tu:. :D
-
Happy Micarta Monday to you all :hatsoff:
(https://i.imgur.com/V4COUiQ.jpg)
-
Nice one Matt ! :tu:
-
:cheers: Steve
-
Happy Micarta Monday to you all :hatsoff:
(https://i.imgur.com/V4COUiQ.jpg)
Good Buck Matt! :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Good Buck Matt! :tu:
It's one of my favorites :cheers:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
:like:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
:tu: :like:
-
:woohoo:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Great start into the week Steve :like:
-
:hatsoff:
-
:woohoo:
[ This attachment cannot be displayed inline in 'Print Page' view ]
Good carry Steve! :tu:
-
:cheers: buddy !
-
8)
(https://forum.multitool.org/index.php?action=dlattach;ts=1647292172;topic=10834.0;attach=532602)
-
:woohoo:
(https://forum.multitool.org/index.php?action=dlattach;ts=1647901038;topic=10834.0;attach=533047)
-
Good Barlow buddy! :tu:
-
:hatsoff:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like:
-
Eureka Jack
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like:
-
.
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:tu:. :like:
-
:)
-
Nice ! :like:
-
:iagree: :like:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:)
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice Micarta!
-
:)
Nice pair for MM ! :cheers:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:tu: :like:
-
:)
-
:like: also !
-
Happy Micarta Monday to you all :hatsoff:
Hope everyone had a good start into the new week :tu:
(https://i.imgur.com/vzPfLFm.jpg)
-
Nice ! :like:
-
:hatsoff: I'm rather fond of the little Squire.
-
Nice Buck for M2! :tu:
-
Buckaroo! :D
-
Buckaroo! :D
:woohoo:
...looking great :tu:
-
Ramsfoot
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Ramsfoot
[ This attachment cannot be displayed inline in 'Print Page' view ]
You bet! :like:
-
:tu:. :like:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
That’s a beauty, Steve!
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
:tu: :like:
-
It's still (just) Monday here, so here's the one Micarta knife I own: a Camillus 27 that acquired its Micarta during a repair/transformation.
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
:woohoo:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Awesome Steve :2tu:
-
Happy Micarta Monday to you all :hatsoff:
(https://i.imgur.com/h7Pypb1.jpg)
-
Great pic Matt ! :tu:
-
:cheers: Steve
-
Nice knives for M2 guys! :tu:
-
Nice pair David :like:
-
:iagree: :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:tu: :like:
-
Buck and Bull Buster
-
Case Folding Hunter with black canvas covers.
-
Case Folding Hunter with black canvas covers.
I have one of those in black canvas as well; it’s a beauty!
-
:D
-
:like: :tu:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:tu: :like:
-
:D
Congrats on your new Buck David, that's a lovely knife :like:
-
:like: :tu:
[ This attachment cannot be displayed inline in 'Print Page' view ]
Niiiice :like:
-
:hatsoff:
(https://i.imgur.com/GoSQGgZ.jpg)
-
:like: :tu:
-
:cheers:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Buck and Bull Nose
-
:like: :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice knives For M2 buddy! :like:
-
:iagree: You've awlso got a great MM carry, David! Is that Buck's version of a Hawbaker Special?
-
:iagree: You've awlso got a great MM carry, David! Is that Buck's version of a Hawbaker Special?
It's Bucks version of the 2018 BF knife IMO. It's similar in concept to a Hawbaker but there are several differences with the blades and frame.
-
It's similar in concept to a Hawbaker but there are several differences with the blades and frame.
It's a sweet knife, that's for sure! :tu: (As an aside, a minty Case Hawbaker Special with both blades date-coded 1978 is one of my Holy Grail knives.)
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :like:
-
:woohoo:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Good ones buddy! :like:
-
Nice Micarta, and the spear and coping blades make for a neat combination! :like:
-
Buck and Bull :D
-
Sweet pair for M2 ! :like: :tu:
-
Burlap oh my !
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Yup those burlap Mustangs are nice! :tu:
-
Buck :D
-
:like:
-
Nice Buck David ! :like:
-
2AB Barlow
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
That's some cool looking micarta!
-
That's some cool looking micarta!
Thanks :cheers: I don't carry that one too much, the handles are really great and have a nice grip even if wet, But at the same time, those handle slabs can break easy if the knife is dropped. Trying to keep it looking new. The company who made it, sent me that a long time ago to help me out in my work and my travels to certain client sites but again I'm trying keep her looking new like that. Keep an eye on the weather today.. Suppose be some bad storms forming up in Greenville and slightly south of that.. More towards tonight.. slight chance of hail as well.
-
Nice one OHT ! :like:
-
Bullnose
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
^^^ I like that red color on the handle scales, Steve. That awesome!
-
Bullnose
[ This attachment cannot be displayed inline in 'Print Page' view ]
:tu: :like:
-
Buck and Trapper
-
:like: :tu:
-
.
-
Nice pic! :like:
-
:hatsoff:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:tu: :like:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:woohoo:
-
10/22 BOTM in time for MM…
-
:like: :tu:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice Barlow Steve,congrats.
-
Thanks ! :hatsoff:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
:tu:
-
Kizer PPY
-
Nice one Hoosier ! :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Good carry Steve! :tu:
Got the Coon for M2
-
GEC Sudbuster opened a new box of Alec Bradley Maxx Freaks on this MM…
-
QSP Penguin
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
(https://forum.multitool.org/index.php?action=dlattach;topic=10834.0;attach=545334;fs=469050)
-
:like: :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice Case for M2! :tu:
Possum :D
-
Thanks buddy, the Possums a good one too ! :like:
-
(https://i.imgur.com/wMhrC85.jpg)
-
Nice one Adam! :like:
-
:iagree: :tu:
-
Coon Skinner
-
Great blades all! :like:
-
Possum Skinner
-
Coon Skinner
:like:
-
SET M3 (Bushcraft Survival)
Gossman Tusker
ESEE-6
ESEE-CR2.5
(https://live.staticflickr.com/65535/49682299512_299b69c1e4_b.jpg)
(https://live.staticflickr.com/65535/52049708435_85ec9ae433_b.jpg)
(https://live.staticflickr.com/65535/52412505448_102eb7c1a3_b.jpg)
(https://live.staticflickr.com/65535/52419198794_0f232a9eab_b.jpg)
-
Great stuff, y'awl! :like: I
need want more Micarta...
-
Nice one Adam! :like:
Thanks! Of course, you may be a little biased for this particular model :D
-
Possum Skinner
Looking good, buddy :tu:
-
Coon Skinner
Just the knife I need for that raccoon that I see every once in a while on my backporch :D
:like:
-
SET M3 (Bushcraft Survival)
Gossman Tusker
ESEE-6
ESEE-CR2.5
(https://live.staticflickr.com/65535/49682299512_299b69c1e4_b.jpg)
(https://live.staticflickr.com/65535/52049708435_85ec9ae433_b.jpg)
(https://live.staticflickr.com/65535/52412505448_102eb7c1a3_b.jpg)
(https://live.staticflickr.com/65535/52419198794_0f232a9eab_b.jpg)
Nice pics, Vadim :like:
Great stuff, y'awl! :like: I need want more Micarta...
:iagree:
-
Looking good, buddy :tu:
Thanks ! :hatsoff:
-
8)
-
Mustang
-
:tu:
-
8)
Good pic of your 47! :tu:
-
I have had a serious Micarta itch lately, and y'awl aren't helping. Some nice stuff here! :tu:
-
Kizer LP
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice one Hoosier ! :tu:
-
2AB Barlow and a Eureka Jack
-
Some nice ones for Micarta Monday! :tu:
This one has a bit of a story to it. I've probably told it before, but just in case I didn't: I fished it out of the Bay. It came to me very badly bent. My money was refunded, and a knife mechanic offered to see if he could fix it. I took him up on the offer. He said he'd never seen a Camillus 27 with a bail that was mangled so badly. After some straightening, Micarta and a new bail were added. Now it looks and works great.
And I 1,000% intend to acquire more Micarta next year.
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
That Cammie looks awesome now :2tu:
-
:hatsoff:
-
:woohoo: first of the year :tu:
-
:like: :drool:
-
Micarta Monday! :woohoo:
[ This attachment cannot be displayed inline in 'Print Page' view ]
There may be another photo from me later...
-
:like: :tu:
-
Thanks, Steve! :hatsoff:
Just a little bonus...
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :like: best man 2
-
A simple work knife that also looks good,
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Good one LC ! :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Very nice pair, Steve!
-
Thanks ! :hatsoff:
-
Very nice steve! :like:
-
:)
-
:like: :tu:
-
Micarta Monday! :woohoo:
Y'awl have shown some excellent examples of one of my favorite man-made handle/scale/cover materials. I'm getting my photo in with about half an hour to spare. Burlap and canvas for today...
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
:hatsoff:
-
:)
-
MM day -
Two of my selected carry just so happen are covered for the special day
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice ones David and LC ! :like:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
LC and Steve :tu: :like:
-
:iagree: Some superb stuff for Micarta Monday!
Today I'm showing four different types of Micarta. From left to right: burlap, linen, denim, and canvas. I just need to find one that's decked out in paper Micarta.
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice knives, Dan :like: :tu:
-
I put a Maserin Scout in my pocket for Micarta Monday because I haven't carried it yet. Well, when I got to work this morning I found that my Case Soddie with buffalo horn scales and S35VN blade had finally arrived (I ordered it before Christmas). So I forgot to take a picture of the Scout by itself :facepalm:
(https://i.imgur.com/c3OPdH6.jpg)
-
:tu: :like:
-
Nice Soddies Adam ! :like:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
Two Micarta’s in similar tones!
-
Nice pair Gordon ! :like:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
Two Micarta’s in similar tones!
Nice pair of knives! :like:
-
Eureka !!!!!
-
:tu: :like:
Nice Soddies Adam ! :like:
Thanks fellas :cheers:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
Two Micarta’s in similar tones!
Great knives :like: & :like:
-
Eureka !!!!!
I like how that looks :tu:
-
Eureka !!!!!
:tu: :like:
-
:)
-
:)
:like: :tu:
-
A.G. Russell Premium Scout for MM…
-
Great knives, nate and David :drool:
-
Thanks, Adam, and some awlsome Micarta from everyone! :like:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
:hatsoff:
-
Stop it already! You had me looking at half Hawks on SMKW a couple of days ago. I am already collecting RR work knives. I really don't need to start buying another model :facepalm:
:rofl:
:cheers:
-
A Half Hawk???
Isn’t that a work knife? For pruning and grafting, do not think it has anything to do with hawks or lil hawks.
-
Stop it already!
Well...even though I wasn't going to buy any more locking folders, your photos of your work knives have me reconsidering that decision. I guess it works both ways! :D
A Half Hawk???
Isn’t that a work knife?
Indeed it is. I'd have no hesitation using one for some decently hard work.
-
Micarta Monday
[ This attachment cannot be displayed inline in 'Print Page' view ]
Black/Red Copperhead and Black Highlands EEJ
-
Cool ! :like:
-
(https://forum.multitool.org/index.php?action=dlattach;topic=10834.0;attach=549119;fs=468157)
-
I must say IT! Your REBAR makes the GEC’s Micarta covers standout.
If I saw that Barlow on a sale table, I could not walk away without buying, really I know I could not. 🔥
-
Coon Skinner
-
Are both blades identical? Like a muskrat pattern?
-
Are both blades identical? Like a muskrat pattern?
Yes sir LC it sure is! :tu: :D Its a single spring also. So it's thin and light in the pocket. If I'd of had one of these back in the day when I was young hunting and trapping. I sure would have been in tall cotton. :)
-
Yes sir LC it sure is! :tu: :D Its a single spring also. So it's thin and light in the pocket. If I'd of had one of these back in the day when I was young hunting and trapping. I sure would have been in tall cotton. :)
Yes!!! That is sweet… in the day, I am not sure we truly would have appreciated the design as much as we do today after awl the trial and error!
-
Some fantastic Micarta, y'awl! :like:
Fairly recently, Monday never would have prompted a :woohoo: out of me. My, how things change!
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:woohoo: :like: :tu:
-
You can only choose one…
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
I choose two ...... :D
-
:like:
-
:tu: :like:
-
Lionsteel Warhorse…
-
Micarta Monday! :woohoo: In addition to some truly great examples...
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Good ones nate and Dan ! :like: :tu:
-
:hatsoff:
-
Good ones nate and Dan ! :like: :tu:
:iagree:
-
:iagree: 2!
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
Blue Denim Micarta for Monday👍
-
Nice ! :like:
-
Steve and LC :tu: :like:
-
:iagree: And to think I dang near forgot a photo for today. Now if only SMKW would get the silver twill Viper Dan back in stock...
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
:hatsoff:
-
(https://uploads.tapatalk-cdn.com/20230221/2087eb17f37e1ce52a6b72c433f9f234.jpg)
-
:like: :tu:
-
:iagree:
-
The Izula II is still good and sharp. And it's officially Micarta Monday! :woohoo:
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
That is a great Micarta handled fixie my friend!
Made me realize I have two of my favorite fix blades tucked away waiting for a future outing yet to be planned…
[ This attachment cannot be displayed inline in 'Print Page' view ]
The 104 is a great camp knife, plus when we got muddy, it cleaned up like new😉
And I will admit, the 245, is doggone pretty example of pretty😁
-
Even a broke clock is right twice a day. Didn’t mean too but happened to have some sweet sweet Micarta on me today. Yeoman action again.
(https://hosting.photobucket.com/images/i86/HarleyXJGuy/FullSizeRender_kESnGd41XQze7jjJpUuuS1.jpg)
-
That is a great Micarta handled fixie my friend!
Thank you, kind Sir! :cheers: :hatsoff: Your Bucks are just as excellent.
Yeoman action again.
You don't see many Macks out west. A shame, as they're great rigs. What engine and transmission does that one have?
Nice Yeoman, too! :tu:
-
Good ones fellas !
Happy MM !
-
:hatsoff: and :like:
-
Thank you, kind Sir! :cheers: :hatsoff: Your Bucks are just as excellent.
You don't see many Macks out west. A shame, as they're great rigs. What engine and transmission does that one have?
Nice Yeoman, too! :tu:
Out west? I am east side Michigan.
Mack engine and a Eaton Fuller 18 speed transmission.
-
Out west? I am east side Michigan.
Mack engine and a Eaton Fuller 18 speed transmission.
A friend who owns a couple Mack s dump trucks, that he has 18 gears for reverse! Is that even a thing?
My cousins, both grew up in Kalamazoo. Oldest works for Eaton assembly and now is in Denver, oversees all maintenance systems for Eaton truck transmissions out west for test units in rigs. Some of the drivers have very specific guarantees regarding downtime if transmission issues.
Is younger brother works for Eaton as well from Utah, but believe he is involved with farm and harvesting transmissions.
-
Out west?
:oops: I should have specified that I was referring to western states. Most of the Macks I saw when I lived in California were garbage trucks, or doing some other municipal duty.
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
Blue Denim Micarta
-
Nice one Gordon ! :tu:
-
Thank you, took a while, but Barlows are growing on me!!!😁
-
Happy Micarta Monday
Today I selected for carry my EE large Rough Ryder in Black (4.25” long double blade)!
Then there was a chatter, and for fun I selected two more for a photo op😁
AWL are BLACK, AWL are Micarta, AWL are sharp, and AWL are pretty nice To carry individually.
I have a small, a medium and a large!
Case Small Jack, RR Canoe, and RR EE Cigar,(it is labeled cattleman😉)
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Absolutely stellar...I need to step up my Micarta game!
Faded Blue Jeans from me for this Micarta (and Metal) Monday. I was hoping to have another metal handled knife to show, but FedEx's goof killed that joy.
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
Happy Micarta Monday
Today I selected for carry my EE large Rough Ryder in Black (4.25” long double blade)!
Then there was a chatter, and for fun I selected two more for a photo op😁
AWL are BLACK, AWL are Micarta, AWL are sharp, and AWL are pretty nice To carry individually.
I have a small, a medium and a large!
Case Small Jack, RR Canoe, and RR EE Cigar,(it is labeled cattleman😉)
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
Nice triple for MM ! :like:
-
Possum Skinner
-
Possum Skinner
Good pic of the Possum. :tu: Sure wished I'd had one back in the day. :D
-
Benchmade Proper for MM…
-
:hatsoff: to Steve, and good choices from Steve and Nate! :like:
-
It is MONDAY, Micarta for Monday…
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
Buck Squire for MM…
-
:like: :tu:
-
I'm late, due to agonizingly slow Wi-Fi...but I did take this photo on Micarta (and Metal) Monday.
-
I have always liked the handles on ESEE :cheers:
-
It was a cheap beer kind of micarta Monday
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like:
-
RRR Stockman
-
Great stuff for Micarta Monday, y'awl! :tu: Mine for Micarta (and Metal) Monday...
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice one Dan ! :like:
-
Thanks, Steve! :hatsoff:
-
THREE for Micarta Monday
Three CLIP POINTS
[ This attachment cannot be displayed inline in 'Print Page' view ]
Three with COFFEE
[ This attachment cannot be displayed inline in 'Print Page' view ]
Three MICARTA COVERS
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice trio Gordon ! :like: :tu:
-
Eureka Jack
-
Case Large Stockman
-
Great choices for Micarta Monday, y'awl! :like: Here's mine (which should be unsurprising)...
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice turnout today ! :tu:
-
(https://forum.multitool.org/index.php?action=dlattach;topic=44823.0;attach=551953;fs=428960)
-
:tu: :like:
-
Buck 301
-
Good one Nate ! :tu:
-
Good ones, Steve and Nate! :tu:
Today the usual Micarta was joined by some bone.
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
:hatsoff:
-
(https://i.imgur.com/yJMPof8.jpg)
-
(https://i.imgur.com/yJMPof8.jpg)
:like: :tu: :woohoo:
And we are off to a good start…
-
Nice BN Adam ! :like:
-
(https://i.imgur.com/yJMPof8.jpg)
:tu: :like:
-
Thank you fellas :cheers:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
I missed this time around. :facepalm: But y'awl done good! :tu:
-
:iagree:
Nice knives, Steve and Gordon :tu:
-
I ain't missing it this time around! :woohoo:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Micarta Monday
[ This attachment cannot be displayed inline in 'Print Page' view ]
Coooperhead & ISULA II
-
Nice ones Dan and Gordon ! :like:
-
Mustang in Brown Burlap
-
Steve, that Mustang is one sharp looking knife. The covers almost resembles snake skin.
:hatsoff: and thank you for the compliment.
-
Bugout sporting Flytanium micarta
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
Steve, that Mustang is one sharp looking knife. The covers almost resembles snake skin.
:hatsoff: and thank you for the compliment.
:hatsoff: :tu:
-
Buck Saunter
-
Thanks, Steve, and great stuff from awl! :tu:
-
:woohoo: Y'awl know I'm quite fond of these two!
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Good examples of Micarta being employed!
-
Multiple layer Micarta, 1 in Blue shades and 1 with Black and Red😜
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice ones Dan and Gordon ! :like:
-
Case Folding Hunter
-
:like: :tu:
-
Some fantastic Micarta, y'awl! :tu: :like:
Case Folding Hunter
Just... :drool: Any idea what item number that is?
-
Case Folding Hunter
10265
-
LC is correct; it is 10265.
In case anyone is not aware, it breaks down like this:
10 - G-10 or micarta handle (this series was “black canvas laminate”, i.e. generic micarta)
2 - number of blades
65 - Case pattern number
-
Nate, that is a handsome hunter. I like the blade combination of that design👍
-
Thanks LC.
If one doesn’t mind carrying around the size and weight (6.7 oz on my scale without the sheath), the two four-inch blades offer a lot of cutting capability, while the 5 1/4” handle is comfortable and large enough for all but the very largest hands to get a full grip on.
-
To be a little bit clearer: I could tell the pattern number is 10265. The item number does not appear on the knife, but on the box. It can also be found in for sale listings, such as the link below:
https://www.casexx.com/Details/?ProductCode=30093&Patid=21
The knife in the link is pattern number 6265, but its item number is 30093.
My reasoning is that knowing the item number might help me recognize that particular 10265 if I go looking for one of my own. Hope I cleared that up okay.
-
To be a little bit clearer: I could tell the pattern number is 10265. The item number does not appear on the knife, but on the box. It can also be found in for sale listings, such as the link below:
https://www.casexx.com/Details/?ProductCode=30093&Patid=21
The knife in the link is pattern number 6265, but its item number is 30093.
My reasoning is that knowing the item number might help me recognize that particular 10265 if I go looking for one of my own. Hope I cleared that up okay.
D’oh, sorry I was confused.
The number you are looking for is 23131.
:cheers:
-
Thanks, Nate! :cheers:
-
It's awlready Micarta Monday again! :woohoo:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
A new Micarta Monday!🤪
Gathered around the few Micarta handles within arm’s length
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice group of Micarta ! :like: :tu:
-
:hatsoff: thank you, awl about variety 😉
-
Ramsfoot
-
Kizer LP
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
I missed out this time around. But good on y'awl for keeping the show going on! :tu:
-
Boker Magnum Rangebuster
(https://i.imgur.com/YyCl1uU.jpg)
-
:like: :tu:
-
Boker Magnum Rangebuster
(https://i.imgur.com/YyCl1uU.jpg)
Nice one Adam! :like:
-
Ramsfoot
Good to see the Ram Foot again. :like:
-
Adam5, that is SUPER NICE👍
-
M M day…
Picked two that met the criteria
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Possum and the Mustang
-
:like: :tu:
-
Great stuff, as awlways! :tu:
-
Today, for Micarta Monday, I selected 3 for a morning hike in a nearby Wetlands area.
Canoe, (never know the water depth),
Copperhead, (just to be friendly, some do wander in the area)
NESMUK, (tradition)
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
Back with a Buck 301 for MM
-
:like: :tu:
-
Great choices, gents! :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Very nice Steve!
My 112 is whimpering, DOESNOT understand why not out and about today ?!?
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Steve and Gordon :tu: :like:
-
Very nice Steve!
My 112 is whimpering, DOESNOT understand why not out and about today ?!?
[ This attachment cannot be displayed inline in 'Print Page' view ]
Very nice ! :like:
-
Good choices for Micarta Monday, Steve and LoopCutter! :like:
-
:hatsoff:
-
If just one, that could be the one😉👍
-
:like:
-
Canvas
-
Very nice choice Steve!!!
-
:iagree:
-
:hatsoff:
-
[ This attachment cannot be displayed inline in 'Print Page' view ] Two Wharncliffe sharpies, both Micarta covers
-
Nice pair foe MM ! :like:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Your Barlow looks intimidating 🫣
The duo appears to be dynamic pair ready for any duty!
:viking: :viking:
-
:D :like:
-
:woohoo:
-
:like:
After making a new neck lanyard, the Izula II is back to regular carry! :woohoo:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
:like:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
^ Luvly wood grain 👍🌹
The Izzie II is a favorite of mine two, handles well as a neck knife on treks and used as a sheath knife attached to preserver vest when kayaking.
It cuts and stays sharp throughout the trip.
PS: I do love your braided cord. Did you weave?
-
Bull Hide
-
Nice one buddy ! :like:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
The RR Work knife in blue layer Micarta 😉
The other is a plain olde blue bone, Mediterranean Blue🤪
-
:like: :tu
-
Nice choices for today, y'awl! :like:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice knives everybody :salute:
(https://i.imgur.com/Cj6DaDF.jpg)
-
Same to you, Adam! :cheers:
-
For Micarta Monday
[ This attachment cannot be displayed inline in 'Print Page' view ]
RR2380, they call a Cattleman, I call a large equal ended Cigar knife.
I like the size. Easy to grip… 😎
-
Nice one Gordon ! :tu:
Happy MM ! :cheers:
-
Nice handles Steve!
Color and texture are great.
-
Thanks Gordon !
-
Good ones for Micarta Monday, y'awl! :tu:
Two "species" of Micarta: canvas and linen.
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
:hatsoff:
-
Micarta Monday! already
Blue Denim Micarta, RR style
[ This attachment cannot be displayed inline in 'Print Page' view ]
Have great week everyone, STARTING with today!!! 👍
-
Nice one Gordon ! :like:
-
(https://forum.multitool.org/index.php?action=dlattach;topic=69990.0;attach=557674;fs=432767)
-
(https://forum.multitool.org/index.php?action=dlattach;topic=69990.0;attach=557674;fs=432767)
Verah nice! :tu:
-
Great stuff, Gordon and Steve! :like:
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
A very versatile knife wig great Micarta handle 🤪 Dan👍
-
:iagree: :tu:
-
:hatsoff: :hatsoff:
-
:woohoo:
-
Selected two plain sytle Micartas for Monday
Both RR models. Both favorites of mine, a Work Knife and a Canoe,
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Great choices for today, Steve and Gordon! :like: GEC has some very nice-looking Micarta, and I'm curious as to how they finish it: polished up, or natural like ESEE does?
Speaking of the ESEE...
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Great choices for today, Steve and Gordon! :like: GEC has some very nice-looking Micarta, and I'm curious as to how they finish it: polished up, or natural like ESEE does?
Speaking of the ESEE...
[ This attachment cannot be displayed inline in 'Print Page' view ]
GEC does both depending on the material. They haven't done a high gloss as far as I know.
-
Thanks, Steve! :hatsoff:
-
:facepalm: it does not seem that long ago, I did not own a single Micarta handle knife😉
Not any more, I started in the office looking for one and then these lovelies drew my attention.
A small sampling of some of my favorite blades, and just so happens these are sporting Micarta handles…
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like:
The Izula II made a new fixie friend today.
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Very nice ! :like:
-
Oregon Trapper
-
Green canvas DLT exclusive…
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Nice one Gordon 👍🏻
-
:woohoo:
-
:like: :tu:
-
:woohoo:
(https://forum.multitool.org/index.php?action=dlattach;topic=10834.0;attach=559449;fs=369687)
-
:like:
-
8)
-
Micarta Monday
Wharncliffe required for cutting trimming of stencils
[ This attachment cannot be displayed inline in 'Print Page' view ]
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
:woohoo:
(https://forum.multitool.org/index.php?action=dlattach;topic=44823.0;attach=559890;fs=391755)
-
Very classy handles on that one Steve. A++
-
:hatsoff:
-
Buck Saunter
-
Nice one Nate ! :tu:
-
Buffalo Jack
-
:like: :tu:
-
Bullnose
-
A.G. Russell Premium Scout
-
:like: :tu:
-
I might never remember again but, for once at least, I've got a bit of Micarta in my pocket on a Monday. :D
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=560890;fs=353279;image)
-
A very classic looking Micarta as welll!
Very good Gareth, very good…
-
I might never remember again but, for once at least, I've got a bit of Micarta in my pocket on a Monday. :D
(https://forum.multitool.org/index.php?action=dlattach;topic=68477.0;attach=560890;fs=353279;image)
Great looking knife and picture ! :like:
-
Natural Canvas here as well :tu:
-
:like: :tu:
-
:woohoo:
-
Micarata Monday was in-trusted to a Copperhead Wharnie
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Lionsteel Warhorse
-
Gordon and Nate 8) :tu:
-
Gordon and Nate 8) :tu:
Thank you Steve :hatsoff:
I must say your scales are the fancy ones though!!!🤩
-
:hatsoff:
-
:woohoo:
-
Very nice Steve, it has been a while if ever I have seen this sharp looking.
:oops: I did not lan my correctly to the calendar :dunno:
-
Thanks Gordon ! :hatsoff:
-
My Monday included a Micarta this week
Case Barehead and another Coyote color tool
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
Micarta with a couple holiday treats
[ This attachment cannot be displayed inline in 'Print Page' view ]
And more, Micarta
[ This attachment cannot be displayed inline in 'Print Page' view ]
Rough Ryder, Case Trapper, and Buck 301 Two blade
-
Sweet ! :like:
-
Black Micarta, arrived last week
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:like: :tu:
-
:hatsoff: Thank you Steve!
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
Black Micarta with red liners!
-
Very classy ! :tu:
-
:woohoo:
-
:whistle:
-
Buck 301
-
My favorite Rough Rider
(https://i.imgur.com/YLRxAAk.jpg)
-
Nice one Adam ! :tu:
-
Eureka Jack
-
Super nice Nate, Alan and Steve.
Comparing to CASE, a Barehead Trapper to a Copperhead, both Wharncliffe blades. Both sharp and both Micarta
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Great knives, Steve and LC :cheers:
-
Thanks Gordon :hatsoff:
Possum Skinner
(https://forum.multitool.org/index.php?action=dlattach;topic=10834.0;attach=563694;fs=366597)
-
BM Proper
-
My 112 slim pro within reach…
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Thanks Gordon :hatsoff:
Possum Skinner
(https://forum.multitool.org/index.php?action=dlattach;topic=10834.0;attach=563694;fs=366597)
POSSUM! :tu:
-
EUREKA !
-
Very nice Steve, the scales just look great on that specimen.
My Case Barehead Wharnie Trapper has been within reach, just not is a picture mood…
-
Thanks Gordon ! :hatsoff:
-
Bullnose
-
Monday :woohoo:
My barehead trapper and Ranger can handle it awl🙄
[ This attachment cannot be displayed inline in 'Print Page' view ]
And, look good doing it!!
-
Very nice Gordon ! :like:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
My only Micarta, a Kizer Bugai.
-
Nice ! :tu:
-
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Happy MM !
-
:like: :tu:
-
For today, two Micarta models that seems to have been ignored
[ This attachment cannot be displayed inline in 'Print Page' view ]
They are being a tad clingy 🙄
-
Buck Saunter
-
Micarta paired with coffee
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Some evening pruning with my Case. [ This attachment cannot be displayed inline in 'Print Page' view ] [ This attachment cannot be displayed inline in 'Print Page' view ]
-
Buck 301
-
Benchmade Proper
-
:like: :tu:
-
A day behind, for MICARTA MONDAY nonetheless😌
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Happy MM!
-
Nice ones LC and David ! :like: :tu:
-
Micarta Monday
Micarta in the middle
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Case Large Stockman
-
Case Large Stockman
Nice 75! :like:
-
Nice 75! :like:
:cheers: David
-
Possum and Cotton
-
Nice pair buddy ! :tu:
Mustang for me
-
Wharncliffe trapper
[ This attachment cannot be displayed inline in 'Print Page' view ]
With a little Micra on the side!
-
Lovely selection folks. :salute:
Sneaking this one in at the end of the day.
-
Nice pair buddy ! :tu:
Mustang for me
Love them Mustangs 🐎
Wharncliffe trapper
[ This attachment cannot be displayed inline in 'Print Page' view ]
With a little Micra on the side!
Good carry! :like:
Lovely selection folks. :salute:
Sneaking this one in at the end of the day.
:tu: :like:
-
:woohoo:
-
Looks like GEC tends to polish up their Micarta a fair bit? Part of me wishes Case would give us a 37 with Micarta!
-
Looks like GEC tends to polish up their Micarta a fair bit? Part of me wishes Case would give us a 37 with Micarta!
Not really, some are quite rough.
-
Rough Micarta is a plus in my book! :tu:
-
Yes, I know I'm a day late but I did put this in my pocket last night. :D
-
That is a handsome Rough Ryder Barlow.
-
That is a handsome Rough Ryder Barlow.
:hatsoff:
-
Gareth, you got me thinking, that Barlow has a familiar look!
[ This attachment cannot be displayed inline in 'Print Page' view ]
Yes sir ree! I have a sibling to yours in a kit, along with a Canoe in the same skin except it is much darker though the same family.
Good taste!!! :cheers:
-
Gareth, you got me thinking, that Barlow has a familiar look!
[ This attachment cannot be displayed inline in 'Print Page' view ]
Yes sir ree! I have a sibling to yours in a kit, along with a Canoe in the same skin except it is much darker though the same family.
Good taste!!! :cheers:
Very nice buddy. :tu:
-
I agree about the bolster stamping. Fortunately I have a couple RR older Barlows without! :hatsoff:
-
I agree about the bolster stamping. Fortunately I have a couple RR older Barlows without! :hatsoff:
I've got one of their Cinnamon "Bone Stag" barlows. Clean bolsters and a much nicer look.
-
I've got one of their Cinnamon "Bone Stag" barlows. Clean bolsters and a much nicer look.
Nice scales, kinda like CASE’s Amber Bone, looks good on what ever applied👍
-
:woohoo: MM
-
Great pair for MM ! :like:
-
Micarta Monday
Only one today…
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
:woohoo: MM
Nice combo David!
GEC produces a nice Micarta cover.
Curious about your FB on the 301s blade. A BOTM iirc and I do not recall if mine has that mark. 🧐
-
Micarta Monday
Only one today…
[ This attachment cannot be displayed inline in 'Print Page' view ]
Good one to have! :like:
-
Micarta Monday
Only one today…
[ This attachment cannot be displayed inline in 'Print Page' view ]
:like:
-
TEW
-
Nice and handsome covers on your BARLOW Steve. 👍
-
Thanks Gordon ! :hatsoff:
-
How about this one?
-
How about this one?
8) knife !
-
:iagree: 😎