Multitool.org Forum
Tool Talk => Leatherman Tools => Topic started by: lew on January 08, 2018, 03:39:13 PM
-
I know I've seen it here somewhere, but I can't seem to find it. Does the Gerber 10 piece tool kit fit my Rebar? I want to add a bit driver but don't really like the flat Phillips Head bits in the Removable Bit Driver from Leatherman.
-
Well, it fits over the driver, and seems like it would stay on. There's considerable play, though. Guess it would work, but I'd be hesitant to put any serious torque on it.
(https://i.imgur.com/TDXDQrO.jpg)
-
Like posted above, it somehow fits, mine just slips on just as far as the grooves of the philips-head stop and where the square shaft starts. The toolkit has an magnet insode, but the LMs driver will not fit into it deep enough to hold onto that, I can shake mine off easily.
Can be improved by light grinding on the phillips heads sides, if you really eant to use it.
-
I think the Ganzo's bit adapter fits nicely. I have to go back and try again.
-
I used it with the Super Tool 300, as both my MP450 and ST300 had square Phillips, and I didn't need yet another adapter. It worked great on that.
-
If I remember correctly it also fits pretty well on a Juice phillips driver.
-
IME it fits the MP700, MP800, MP600, ST300, Rebar, Ganzo, Kick, Core, Fuse, Blast, C33 Crater, OUTU Vic Swisschamp/Explorer, and Spirit...
some better than others and tighter but works on all of these
:cheers:
-
Thanks, guys. That gives me some options.
-
Juice, MP400, Ganzo G302-B, Rebar, Core.
Great fit for all.
(https://i.imgur.com/HEcwW3O.jpg)