Multitool.org Forum
Tool Talk => The Mod Squad => Topic started by: Poncho65 on March 15, 2017, 08:30:18 PM
-
Well I have carried my PST 1.5 lately and finally made myself go and cut a SOG saw to fit into my PST :D
I have had it marked to cut for months :whistle:
(https://c1.staticflickr.com/4/3951/32616425314_94f647a145_z.jpg) (https://flic.kr/p/RGcGUA)20170315_115117 (https://flic.kr/p/RGcGUA) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Compared to a couple other PST/PST II parts to see what needed to be cut away for sure :tu:
(https://c1.staticflickr.com/4/3848/33331691541_255bf9db10_z.jpg) (https://flic.kr/p/SMpCCV)20170315_115320 (https://flic.kr/p/SMpCCV) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
I cut the back off and then went to making the pivot end match the factory PST end of this blade :tu:
(https://c1.staticflickr.com/4/3728/32616409004_0c08384932_z.jpg) (https://flic.kr/p/RGcC4o)20170315_122052 (https://flic.kr/p/RGcC4o) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
(https://c1.staticflickr.com/1/739/33459400195_e8a2ff65b6_z.jpg) (https://flic.kr/p/SYGaYg)20170315_122103 (https://flic.kr/p/SYGaYg) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
(https://c1.staticflickr.com/3/2842/33076380710_a79f3b82eb_z.jpg) (https://flic.kr/p/SoR6C3)20170315_122037 (https://flic.kr/p/SoR6C3) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Next I took a diamond stone and a sanding block to clean it up and make the finish a bit smoother and more eye pleasing :D
(https://c1.staticflickr.com/4/3670/32645396913_ec670f916c_z.jpg) (https://flic.kr/p/RJLc9V)20170315_122800 (https://flic.kr/p/RJLc9V) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Next into the PST and see if it fits :think: Yep looks pretty good :tu: Now I mark the nail nick position with a Sharpie :cheers:
(https://c1.staticflickr.com/1/780/33076334580_62bb3f35f4_z.jpg) (https://flic.kr/p/SoQRUG)20170315_123359 (https://flic.kr/p/SoQRUG) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Cut the nail nick in :tu:
(https://c1.staticflickr.com/4/3895/33419263816_7693f90177_z.jpg) (https://flic.kr/p/SV9sPJ)20170315_123543 (https://flic.kr/p/SV9sPJ) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Now to see if it can cut :cheers:
(https://c1.staticflickr.com/4/3947/33419143556_d4212eb7f4_z.jpg) (https://flic.kr/p/SV8R5h)20170315_124314 (https://flic.kr/p/SV8R5h) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
Tested and works :dd: Now to see the finished PST 1.5.1 :woohoo:
(https://c1.staticflickr.com/3/2823/33076441510_b5e9e10194_z.jpg) (https://flic.kr/p/SoRpGj)20170315_124037 (https://flic.kr/p/SoRpGj) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
And a comparison to the Rebar and it's saw :cheers:
(https://c1.staticflickr.com/1/727/33419152416_0c1aa4bba8_z.jpg) (https://flic.kr/p/SV8TH3)20170315_124158 (https://flic.kr/p/SV8TH3) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
-
Great job Poncho :like: :cheers: :tu:
-
Nice :tu:
-
Way to go Mr Poncho! :tu: :like:
-
Thanks guys :tu: I am going to try and carry it for a bit and see how it goes :cheers:
-
Nicely done Poncho :tu:
Sent from my SM-G920R4 using Tapatalk
-
Nice job! That's something I want to do, but I haven't found a busted PST or PST II to do it to. My PST II still works fine, and I see no reason to mess with it. I'm thinking about trading an intact PST for a friend's which has had one of the plier pivots disappear (which was replaced with a nut and bolt).
-
What started this was that I bid on a PST II and got it for cheap but the handles were messed up ::) and I also had a PST that I didn't care to take apart with a couple issues ;) :D
It is a very great EDC anyways and now it is more so with the saw :dd: Not really much else that I would need on it :think: Especially since I carry a SAK anyways :tu:
-
Nicely done Poncho :tu:
Sent from my SM-G920R4 using Tapatalk
:hatsoff:
-
Guess I could include the original thread were I started with this PST :think:
http://forum.multitool.org/index.php/topic,65702.0.html
Pietervn also did this mod a couple years ago and had I noticed his I wouldn't have had to cut the back off of mine :whistle: Guess I should have cut the pivot part first then tried it :facepalm: :rofl: Well I have another so I may give it another go :shrug:
http://forum.multitool.org/index.php/topic,48498.0.html
-
10/10 :tu:
How about a :ahhh :ahhh :ahhh!!! MINI !!! :ahhh :ahhh :ahhh saw? :D
-
Cool mod :salute:
-
A :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though :think: :rofl:
-
Cool mod :salute:
Thanks Zed :hatsoff:
-
A :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though :think: :rofl:
Stop making excuses and get it done! :pok:
-
A :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though :think: :rofl:
Stop making excuses and get it done! :pok:
Nearly have to be foldable to be able to cut anything :think: that or an inch and a half saw :ahhh :ahhh :ahhh :rofl:
-
A :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though :think: :rofl:
Stop making excuses and get it done! :pok:
Nearly have to be foldable to be able to cut anything :think: that or an inch and a half saw :ahhh :ahhh :ahhh :rofl:
It would still be cool. :D
-
You ever see the little blades I made for the Core?
-
Found a pic.
(https://c1.staticflickr.com/9/8229/8487662791_c477b3bb62_b.jpg) (https://flic.kr/p/dW2urD)
-
I had not seen those :o I :like: them and they would both fit into the :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh :D
Very cool 8) Thanks for the pic :tu:
-
Don't know if they would fit, my mini went years ago.
-
Guess I could include the original thread were I started with this PST :think:
http://forum.multitool.org/index.php/topic,65702.0.html
Pietervn also did this mod a couple years ago and had I noticed his I wouldn't have had to cut the back off of mine :whistle: Guess I should have cut the pivot part first then tried it :facepalm: :rofl: Well I have another so I may give it another go :shrug:
http://forum.multitool.org/index.php/topic,48498.0.html
Nice mod, a saw seems to be lacking in the PST range. I like the shape you made it, I think Mr Harley will have something to say about the decapitation. :D
If you do another, do the bottom bit first, that will show you how much needs to be taken off the top.
Cheers,
Pete
-
Guess I could include the original thread were I started with this PST :think:
http://forum.multitool.org/index.php/topic,65702.0.html
Pietervn also did this mod a couple years ago and had I noticed his I wouldn't have had to cut the back off of mine :whistle: Guess I should have cut the pivot part first then tried it :facepalm: :rofl: Well I have another so I may give it another go :shrug:
http://forum.multitool.org/index.php/topic,48498.0.html
Nice mod, a saw seems to be lacking in the PST range. I like the shape you made it, I think Mr Harley will have something to say about the decapitation. :D
If you do another, do the bottom bit first, that will show you how much needs to be taken off the top.
Cheers,
Pete
Thanks Peter :salute: Most definitely will do the pivot end first and then check for fit :D
-
Nice mod Poncho!
-
Yup :multi:
-
Thanks guys :hatsoff: I am very happy to have the saw in such a slim package as the PST :cheers: :like:
-
Well I cut another saw for this MT ::) :D I was cutting another for my MP600 in this thread https://forum.multitool.org/index.php/topic,71276.0.html and decided to go ahead and cut both at the same time :cheers:
(https://c1.staticflickr.com/4/3933/33804751225_f5326b7bd6_z.jpg) (https://flic.kr/p/TvdbNn)20170402_194103 (https://flic.kr/p/TvdbNn) by Poncho 65 (https://www.flickr.com/photos/148903443@N02/), on Flickr
I haven't installed it yet but when I do I will take pics ;) :D
-
I like the narrower version better myself, less drag when cutting :tu:
-
I like the narrower version better myself, less drag when cutting :tu:
And it looks more like the Core saw which is cool.
-
You really need to install it so we can judge it. :)
-
:popcorn:
-
I will try and get around to installing it this weekend of we don't end up working :tu:
I like the look of the other one better but it takes a little more effort getting out if it gets pushed down to far :whistle:
This one would likely stay in if I got it put in and was easier to get out and still fit like the other one in the pivot :D
-
Just put a dab of silicone filler in the handle for it to sit on.
-
Just put a dab of silicone filler in the handle for it to sit on.
I have never thought to try that :o Thanks for the idea :cheers: :like: :like:
-
:hatsoff: