Multitool.org Forum
Trade Forums => Tools Needed => Topic started by: Douglas on May 19, 2018, 01:38:23 PM
-
All I'm really looking for is the driver itself as I already have 100's of bits. :ahhh
I've been looking on EVILbay and to me $30 to $60 and I get stuck with a case and 2d bits I really don't need just seems exceptionaly EVIL. :twak: :twak:
That brings me here, Hoping some one here has one just collecting dust that they would be willing to part with at a more reasonable rate. :whistle:
Anybody willing to help a fellow out? :pok: :pok:
-
All I'm really looking for is the driver itself as I already have 100's of bits. :ahhh
I've been looking on EVILbay and to me $30 to $60 and I get stuck with a case and 2d bits I really don't need just seems exceptionaly EVIL. :twak: :twak:
That brings me here, Hoping some one here has one just collecting dust that they would be willing to part with at a more reasonable rate. :whistle:
Anybody willing to help a fellow out? :pok: :pok:
What philips driver is it you're after Dougie?
Edit: sorry just noticed the bit... bit.
-
Fair question Fuzzy
This is the one
I have an OG Wave, a Rebar on the way from zxroa1 and have seen it mentioned this works with the Vic Spirit so I figured it's about time I started to check into getting one. Like I said though with so many bits already I realy don't have to have the case and 2d bits, they would most likey just collect dust, (or is that RUST- they are Leatherman anyway). :whistle:
(https://smhttp-ssl-53433-prd.nexcesscdn.net/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/l/t/lt931012x1000.jpg)
-
I learned via other members that a off brand multi with bits have an adapter the fit the rebar’s and ST Phillips just fine. https://www.amazon.com/gp/aw/d/B01N4AUUBG/ref=mp_s_a_1_13?ie=UTF8&qid=1526735647&sr=8-13&pi=AC_SX236_SY340_QL65&keywords=ganzo+multitool (https://www.amazon.com/gp/aw/d/B01N4AUUBG/ref=mp_s_a_1_13?ie=UTF8&qid=1526735647&sr=8-13&pi=AC_SX236_SY340_QL65&keywords=ganzo+multitool)
I found one for about $6 at a Menards.
Sent from my iPhone using Tapatalk
-
Ah, I haven't got one, else it would be yours, but I think there's still quite a few about. I'm sure someone will let you have one at a steal! :tu:
-
I have gotten them at Cabelas and around $15 too!
Sent from my iPhone using Tapatalk
-
Here is picture of the bit adapter on my Rebar with kit and then the no-name MT it came with.
(https://uploads.tapatalk-cdn.com/20180520/ccd6cad7db104f219ce9fdb8ea1eff57.jpg)(https://uploads.tapatalk-cdn.com/20180520/8093a78793d8647a0ba1f46d6f4a12ef.jpg)
Sent from my iPhone using Tapatalk
-
LC,
Can you tell ne if it fits well with the Vic Spirit also. I have read in more than one place that the Leatherman adaptor dose play nice with the Spirit.
-
Can not confirm with the Swisstool as I do not have one.
It does fit very well on the Rebar and ST300. Go $6 bucks that is why I have it.
I own multiple Rebars, 2 are traveling with me, 1 in suit case w/LM adapter. The other in carry bag along with dedicated tools.
Then the other 2 are near these $6 adapters and bits at homestead. As is the ST300.
Sent from my iPhone using Tapatalk
-
LC,
Can you tell ne if it fits well with the Vic Spirit also. I have read in more than one place that the Leatherman adaptor dose play nice with the Spirit.
Yes the Leatherman Removable Bit Driver will fit a Victorinox SwissTool or Spirit.
However I personally wouldn't describe it as 'play nice' nor would I bother carrying that combo for daily use.
-
I always carry the Leathernan adapter with the Spirit X so YMMV as they say!
Sent from my iPhone using Tapatalk
-
I use a Gerber one with the ST300. And you can shove a serious amount of stuff in the sheath that comes with it. Mine has held together well, though I recently did put a snap in to supplement the aging Velcro. In fact, I've used the sheath more than the tool kit.
-
THanks for the tips. Still hoping some one here has a spare to sell.
-
931012 Leatherman bit kit is sold via several outlets. $18 was the least expensive.
I only have the one LM adapter and it travels with the Rebar or ST300 along with full set of 2D bits. Most compact carry option.
I use the other adapter (w/low cost multi-tool) and bit kit provides option for my other 3D bits. Cost for that is under $8 or less.
I wish i could help, but have never found these reduced allowing to have an extra, reason for the other option.
Sent from my iPhone using Tapatalk