Many HD Pics of ST300 on LM site...

John Frederick · **on:** July 17, 2009, 01:57:32 AM

Forgive me if I'm passing along common knowledge, I'm not around enough to know every thing going on. Anyway I saw that the Leatherman site has lots of Super Tool 300 pics in the album section...

http://www.leathermanlibrary.com/thumbnails.php?album=113

I can't wait till this one is available, it looks perfect to me (except for lacking scissors

)

RaptorMan · **Reply #1 on:** July 17, 2009, 02:14:47 AM

Yes I would say scissors added would make it perfection

Poncho65 · **Reply #2 on:** July 17, 2009, 03:07:09 AM

Thanks for the link John

J-sews · **Reply #3 on:** July 17, 2009, 03:18:02 AM

Quote from: John Frederick on July 17, 2009, 01:57:32 AM

Forgive me if I'm passing along common knowledge, I'm not around enough to know every thing going on. Anyway I saw that the Leatherman site has lots of Super Tool 300 pics in the album section...

http://www.leathermanlibrary.com/thumbnails.php?album=113

I can't wait till this one is available, it looks perfect to me (except for lacking scissors )

Mmmmm-MMMMM! It looks absolutely scrumptious!

RaptorMan · **Reply #4 on:** July 17, 2009, 03:30:06 AM

Still think it looks a little big though

John Frederick · **Reply #5 on:** July 17, 2009, 03:38:41 AM

Quote from: RaptorMan on July 17, 2009, 03:30:06 AM

Still think it looks a little big though

It is big... BUWAHHHHHAAAAHAAAHHAAA!!!!

Freudian Frog · **Reply #6 on:** July 17, 2009, 03:48:01 AM

Hurray for HUGE tools!

Can't wait for this... I hope it gets priced right - right into my hands that is!

cliosguy · **Reply #7 on:** July 17, 2009, 03:52:58 AM

Quote from: One Lame Frog on July 17, 2009, 03:48:01 AM

Hurray for HUGE tools!

Can't wait for this... I hope it gets priced right - right into my hands that is!

+1

Chako · **Reply #8 on:** July 17, 2009, 03:54:40 AM

It has carbide cutters that are user replaceable.

John Frederick · **Reply #9 on:** July 17, 2009, 04:11:17 AM

Quote from: Chako on July 17, 2009, 03:54:40 AM

It has carbide cutters that are user replaceable.

Actually they are 154CM as per the press release...

Cutting wire—regular, stranded, or hard—is a common application on the job. When frequent, heavy pressure is applied, cutters can become dented and dull, causing the pliers to stick and jam up. By making the regular/hard-wire cutters removable they can be sharpened or replaced on the spot (replacement cutters sold separately). In addition, by optimizing the heat treatment process and replacing the standard stainless steel with premium 154CM the wire cutters will hold an edge three times as long for maximum durability.

I think I would prefer Carbide but I'm reserving judgment till I use these first.

J-sews · **Reply #10 on:** July 17, 2009, 05:04:31 AM

Actually I'm thinking the 154CM might be a good choice.

Some folks have reported that the Gerber tools with carbide inserts are a bit prone to chipping edges. $:-\$

Anthony · **Reply #11 on:** July 17, 2009, 05:19:09 AM

I'm skeptical about the thickness...I'd like LM to post some comparison shots, prefferably alongside the original Super Tool.

Deere Man · **Reply #12 on:** July 17, 2009, 05:22:50 AM

YES!

Benner · **Reply #13 on:** July 17, 2009, 12:25:04 PM

Quote from: RaptorMan on July 17, 2009, 02:14:47 AM

Yes I would say scissors added would make it perfection

Scissors?! Pah! This is a mans tool (I'm hoping they will still let me have one

).

Does look good doesn't it.

getahl · **Reply #14 on:** July 17, 2009, 05:45:50 PM

Quote from: Benner on July 17, 2009, 12:25:04 PM

Scissors?! Pah! This is a mans tool (I'm hoping they will still let me have one ).

Does look good doesn't it.

I agree; scissors are nice and all, but I'm rather stoked they're not being included. The only real action the scissors on my Charge TTi see are as nose hair trimmers. They do excel at that task, though...

I'm really looking forward to this tool. It might even partially replace my beloved Charge. The tentative release date is still sometime in September, right? I'd really like to pick one up before heading up to NorCal for a wedding late in the month.

John Frederick · **Reply #15 on:** July 17, 2009, 07:43:58 PM

A wedding is one occasion where you absolutely need a nose hair trimmer

If you only bring along your new ST300 you're gonna be pulling those hairs out!!

Pacu · **Reply #16 on:** July 17, 2009, 07:48:29 PM

i think i just licked the screen

i think i'll tell the wife i NEED one for work. It's mandatory. Everyone else has one!

Pacu · **Reply #17 on:** July 17, 2009, 07:49:46 PM

Quote from: John Frederick on July 17, 2009, 07:43:58 PM

A wedding is one occasion where you absolutely need a nose hair trimmer

If you only bring along your new ST300 you're gonna be pulling those hairs out!!

alot of people cry at weddings...now we know why....NO SCISSORS for nose hair!

AHB · **Reply #18 on:** July 17, 2009, 08:20:03 PM

Quote from: Pacu on July 17, 2009, 07:48:29 PM

i think i'll tell the wife i NEED one for work. It's mandatory. Everyone else has one!

You think she buy that...?

(maybe I should try it too)..

Blackbeard · **Reply #19 on:** July 17, 2009, 11:26:07 PM

Anyone know how much this will be? Gotta be in the $75 range

getahl · **Reply #20 on:** July 17, 2009, 11:29:31 PM

That's the price I'm hoping for, personally. Much more, and it might cut into my knife fund

Freudian Frog · **Reply #21 on:** July 18, 2009, 04:46:32 AM

... I hope it's $20.

EDIT: Or atleast, give some to MT.O for a giveaway that I could win?

turbov21 · **Reply #22 on:** July 19, 2009, 11:13:28 PM

Quote from: Blackbeard on July 17, 2009, 11:26:07 PM

Anyone know how much this will be? Gotta be in the $75 range

I'm guessing $85~90, at least that's what I'm preparing myself for anyway. Man, this tool is exciting.

The ST300 probably won't replace my Crunch in my EDC, but I may have to buy myself a new bag to make room for both.

rp252 · **Reply #23 on:** July 19, 2009, 11:19:19 PM

They are some great pictures. Can't wait for this tool - I really like the Core, so this should be really good

Gareth · **Reply #24 on:** July 19, 2009, 11:57:09 PM

Quote from: Corrugated on July 17, 2009, 05:19:09 AM

I'm skeptical about the thickness...I'd like LM to post some comparison shots, prefferably alongside the original Super Tool.

That's my big concern as well. $:-\$ I don't think I have much need for this one but I'd certainly want to hold it before I'd even consider handing over any cash.

joebw · **Reply #25 on:** July 20, 2009, 12:35:03 AM

Hi,

For those wondering about the ST300 pricing, have a look at this from the LM site.

Best - Joe

Marketing/Publicity
Juli Warner
Leatherman Tool Group, Inc.
800-847-8665
juli.warner@leatherman.com
www.leatherman.com

Super Tool 300—the original heavy-duty multi-tool is back!

This fall, Leatherman will be bringing back Super Tool® with plenty of new and upgraded features. The new Super Tool 300 (ST300) will continue the long tradition of preparing the working man and DIYers alike, for the expected and unexpected.

who demands strength, quick access to tools, and comfort for tough jobs.

Arguably the most important feature of the ST300; the pliers have been optimized for strength. To maintain the balance of materials when making room for the new removable wire cutters, more steel was added to key areas, making them the strongest, beefiest pilers we’ve ever produced. In addition the neck of the pliers is sloped for reaching even further into tight spaces.

Cutting wire—regular, stranded, or hard—is a common application on the job. When frequent, heavy pressure is applied, cutters can become dented and dull, causing the pliers to stick and jam up. By making the regular/hard-wire cutters removable they can be sharpened or replaced on the spot (replacement cutters sold separately). In addition, by optimizing the heat treatment process and replacing the standard stainless steel with premium 154CM the wire cutters will hold an edge three times as long for maximum durability.

The idea of “clumping” was originally introduced with the first Super Tool. By pulling on only one tool, you would get them all from the handle at once, including the knives. To improve on safety, the new ST300 has just that, “Edge-safety Clumping”. If you pull on either of the two knifes they are the only implement that will come out. Conversely if you pull on any of the other features the sharp-edged ones stay put.

The ST300 straight blade is hollow ground for easy sharpening. Screwdrivers are in the sizes professionals use most and are also hollow ground for a better fit. The handles are rounded for comfort and have cut outs on the side to easily access blades when wearing bulky work gloves. The locks on the ST300 have been strengthened to ensure full engagement when the features are under heavy use.

ST300 will ship in September 2009 for distribution worldwide and will come with Leatherman’s industry-leading, 25-year warranty. MSRP for the ST300 will be $84.00 (USD). A black oxide version with cap crimper will also be available at an MSRP of $97.00 (USD).

History of the Super Tool
The original Super Tool was introduced in 1994. The first multi-tool of its size and strength, it was an instant success selling more than one million units in the first two years alone. In 2001 modifications were made and the Super Tool 200 hit the market. The new ST200 featured moon-shaped locks on the handle sides, instead of the original all-in-one locking system. Customers still raved about the tool’s strength and many applications, but the locks and “clumping” were not as user-friendly as they would have liked. Enter the Core®.

In 2005 Leatherman revised the ST200 putting new locks on the back sides of the handles and doing away with “clumping”. The jaws were also re-designed for strength and the new tool was called the Core. Underestimating the popularity of this new tool and how quickly it would be adopted for every day use on job sites the world over, the lock design and tool accessibility was not what it could be. Fast forward to 2009 and the Super Tool 300. This new design, specifically for heavy-duty, on-the-job use is sure to find its place in tool belts, gear boxes, saddle bags, MOLLE vests, and center consuls the world over.

About Leatherman
Founded in 1983, Portland, Oregon-based Leatherman Tool Group is known for producing the world’s most precisely engineered multi-tools, knives, pruners and lights. Leatherman’s engineering standards remain unmatched in the industry today. With new products for trades, hunting, outdoor, fishing, gardening and general purpose, the Leatherman tradition of innovation, tight specifications and premium materials continues to endure.

getahl · **Reply #26 on:** July 20, 2009, 03:32:38 AM

Awesome. I can swing 84 bones. Possibly even less elsewhere!

Zack · **Reply #27 on:** July 20, 2009, 06:00:33 AM

Expect between 15% and 20 % less than MSRP.

RaptorMan · **Reply #28 on:** July 21, 2009, 03:42:08 AM

I hope less I want 2 and I am on a budget. It could cut in to my Waterfowl accessory fund.

Anthony · **Reply #29 on:** July 21, 2009, 04:47:21 AM

I wish there was a standard version in black oxide...

I can't wait to read reviews on this from some of you here...I'll probably hold off buying it for a while. This would be a good candidate for a Charter Member passaround if Def could get his hands on one a little early

Hello Lurker! Remove this ad and much more by logging in.

Many HD Pics of ST300 on LM site...

Donations

Community Links