Multitool.org Forum
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
+-

Hello Lurker! Remove this ad and much more by logging in.


This my moddified wave... 5334

Full Member Posts: 186
This my moddified wave...
« on: May 11, 2007, 08:31:08 PM »
Don't know if this has been posted here...
This my moddified wave, took the parts from a LM kick.



1. Removed the bit holder from de wave and put the philips driver from the Kick.
2. Removed the little bit holder and put the long flat screwdriver from the Kick, this was a tight fit, because the flat sd is thicker than the small bit holder.
3. Bend the little tabs insde the handles, so it can close.
4. File the tip of the long screwdriver 1/16" so it doesn't interfire with the scissors.
5. Epoxy laptop to side of Wave. :twak:

All i need now is the bit adapter for the kick and a removable lanyard ring to try to make saws J-sews style
Admin Team Absolute Zombie Club Posts: 23,216
Re: This my moddified wave...
« Reply #1 on: May 12, 2007, 12:21:47 AM »
Howdy Chaka, welcome to Multitool.org!
Nice mod job too! I assume you needed the longer reach of the dedicated drivers, rather than the short removeable bits?

(PM me with your address, and I'll send you a saw blade to play with)

Bob

In order to be certain of having the right tool for every job.........one must first acquire a lot of tools
No Life Club Posts: 3,994 Improvise.
Re: This my moddified wave...
« Reply #2 on: May 12, 2007, 12:25:16 AM »
Did you use those special security bits to take it apart?

I'd like to get a Wave and mod it almost exactly like that (take out the bit holder and the scissors that I heard aren't that great) and add the longer/dedicated drivers.

[
Full Member Posts: 186
Re: This my moddified wave...
« Reply #3 on: May 16, 2007, 04:19:34 PM »
Yes i like the longer reach of the drivers... BTW, thanks for your offer, PM sent...  :cheers:

and yes, i did use 2 security bits (T10), not dificult to find...


Sr. Member Posts: 422
Re: This my moddified wave...
« Reply #4 on: May 16, 2007, 07:25:24 PM »
Did you use those special security bits to take it apart?

I'd like to get a Wave and mod it almost exactly like that (take out the bit holder and the scissors that I heard aren't that great) and add the longer/dedicated drivers.

Most of the 5 star torx LMs are now sold out, all the new ones are 6 star torx. Just ask before you buy.

Dave
Admin Team Absolute Zombie Club Posts: 23,216
Re: This my moddified wave...
« Reply #5 on: May 17, 2007, 02:34:02 AM »
Most of the 5 star torx LMs are now sold out, all the new ones are 6 star torx. Just ask before you buy.

Dave

Good advice there for those planning to do any mods.

In order to be certain of having the right tool for every job.........one must first acquire a lot of tools
Hero Member Posts: 692
Re: This my moddified wave...
« Reply #6 on: May 17, 2007, 07:51:12 AM »
1. Removed the bit holder from de wave and put the philips driver from the Kick.
2. Removed the little bit holder and put the long flat screwdriver from the Kick, this was a tight fit, because the flat sd is thicker than the small bit holder.
3. Bend the little tabs insde the handles, so it can close.
4. File the tip of the long screwdriver 1/16" so it doesn't interfire with the scissors.
5. Epoxy laptop to side of Wave.

Did you also grind down the pliers?

I tried a similar modification with the Charge and ran into problems since the handles wouldn't close all the way.  The pliers didn't have enough room after the longer tools were added. http://forum.multitool.org/index.php/topic,418.15.html

Another forum member, Kodiak, did a similar modification and he ground down the pliers so that the handles would close:  http://forum.multitool.org/index.php?topic=738.new
Here's a quote from his post:
Also, I had to make a little channel on the pliers head on the side. I used a dremel.
mod.jpg
* mod.jpg (Filesize: 56.7 KB)
« Last Edit: May 17, 2007, 08:10:40 AM by supratentorial »
Full Member Posts: 186
Re: This my moddified wave...
« Reply #7 on: May 17, 2007, 05:45:43 PM »
No grinding on the pliers. Just bend the little tabs inside handles and dremel the tip on the long flat screwdriver so it clears the scissors...
Hero Member Posts: 692
Re: This my moddified wave...
« Reply #8 on: May 18, 2007, 01:43:40 AM »
No grinding on the pliers. Just bend the little tabs inside handles and dremel the tip on the long flat screwdriver so it clears the scissors...

That's weird.  After the same modification of the Charge, there was a slight gap in the handles when the tool was closed because the longer tools prevented the pliers from being fully recessed into the handles.  I thought the Charge and the Wave had the same basic design.  ???

Do the handles close all the way shut on the modified Wave?  The same as on a normal Wave?  Or is there a slight gap?  Before I buy a Wave and modify it, I want to make sure that I don't run into the same problem as I did when I tried to modify a Charge.  Thanks!
« Last Edit: May 18, 2007, 01:52:34 AM by supratentorial »
Full Member Posts: 186
Re: This my moddified wave...
« Reply #9 on: May 18, 2007, 07:19:55 PM »
According to Paola there's a small gap.

Hero Member Posts: 692
Re: This my moddified wave...
« Reply #10 on: May 19, 2007, 12:42:40 AM »
According to Paola there's a small gap.

(Image removed from quote.)

Oh... was there a multi-tool in that photo?!  :P
Admin Team Absolute Zombie Club Posts: 23,216
Re: This my moddified wave...
« Reply #11 on: May 19, 2007, 04:19:54 AM »
I wish the gap was bigger.  :(

In order to be certain of having the right tool for every job.........one must first acquire a lot of tools

 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
May Goal: $300.00
Due Date: May 31
Total Receipts: $156.88
PayPal Fees: $10.05
Net Balance: $146.83
Below Goal: $153.17
Site Currency: USD
49% 
May Donations

Community Links


Powered by EzPortal
SMF 2.0.18 | SMF © 2020, Simple Machines
Page created in 0.035 seconds with 55 queries.
© 2018 Defender Web & Tool