These Raker tools have taken MTO by storm. I'm using mine every day for loads of stuff.
I haven't got mine yet, but I got an idea. What if you put a Philips 1/4" bit in a spy capsule and carry it with the Raker Ring. That way, when you need a Phillips, you just take out the bit and put it in the 1/4" hole in the tool. Would that work? Does somebody have an extra pill fob they want to get rid of? I'll trade one of these: http://www.dealextreme.com/details.dx/sku.20243 .
The 1/4" cutout is good for adjusting SOG tools that are held together by 1/4" bolts.
Quote from: Anthony on December 17, 2009, 04:24:59 AMThe 1/4" cutout is good for adjusting SOG tools that are held together by 1/4" bolts.A good reason too get a 2nd Raker
ari6126,I have some long 1/4" bits that I can use my thumb to hold them in. The short ones would need an Atwood style rubber band wrapped around the tool. I could have put a notch in it to facilitate the O-ring but felt that I didn't want to encrouch on some one else's style. I have no problem with any one modifying their tools to utilize them for their personal needs. I don't know of any one that can make a tool to suit every one. I have tried to make a simple tool that may be used for several functions well and a few maybe not so well. The 1/4" hex hole is one of the not so well functions. A small grinding wheel to make a notch on each side of the 1/4" hex and you have what you need to hold the bit. I hope I have answered your question and if you have more, please let me know.
these tools are priced far better than the competition
Quote from: scrappy on December 19, 2009, 09:55:56 PMthese tools are priced far better than the competitionI own some of the"competition". YOU are so right!