What SOGs have you got?

M.TEX · **Reply #30 on:** July 05, 2007, 09:56:08 PM

Well Today I got my first SOG and it is a TOOLCLIP.
Thanks to a guy at EDC Forums...( It was a good trade )

So far I like it . I didn't use it yet. But the Pliers handle looks very
light and I think I should have to be carefull...could break with stress...

Anybody know anything about that ?
But looks good to me , now I need the small SOG with black body...
BTW what model is that Mini ToolClip

M.TEX

Grant Lamontagne · **Reply #31 on:** July 07, 2007, 04:12:33 AM

The ToolClip is a pretty handy multi. I like the non- folding plier types as they seem that much sturdier. Not that I've ever found myself in a position to break the pliers on any tool, but it's still nice to have that feeling of solidity that only a set of rigid pliers can bring.

Def

J-sews · **Reply #32 on:** July 07, 2007, 05:31:00 PM

Quote from: M.TEX on July 05, 2007, 09:56:08 PM

Well Today I got my first SOG and it is a TOOLCLIP.
Thanks to a guy at EDC Forums...( It was a good trade )

So far I like it . I didn't use it yet. But the Pliers handle looks very
light and I think I should have to be carefull...could break with stress...

Anybody know anything about that ?

Hmmm...I don't think there is much to worry about in regards to bending the ToolClip plier handle. According to the instructions it was intended specifically to double as a pry bar. It is certainly heat treated and tempered properly for that task.

665ae photos

M.TEX · **Reply #33 on:** July 09, 2007, 03:52:20 AM

Hahahaha to be used as prybar

nope. Im not doing this.....

BTW what is that piece of metal on that last pic ?

665ae · **Reply #34 on:** July 09, 2007, 03:58:56 AM

It's a cover for the serrated blade... safety first!

David Bowen · **Reply #35 on:** July 09, 2007, 08:13:05 PM

It's funny how many companies copy the model of the ToolClip or the SwissGrip, and no one ever seems to do it quite as good as the originals. Copycats, they are called that for a reason.

David

Tarrodemierda · **Reply #36 on:** July 28, 2008, 09:06:17 AM

i own a powerlock with a serrated blade from earlier models,and a paratool is on its way here too.

but what i would really want is toolclip(s).

american lockpicker · **Reply #37 on:** July 28, 2008, 01:48:13 PM

I have a Master Mechanic PowerLock.

David Bowen · **Reply #38 on:** July 28, 2008, 03:25:03 PM

I do have more SOG's than I use to, I now have a Powerlock, Powerlock 2.0, Pocket Power Plier Deluxe, CrossGrip, Switchplier and Paratool. Not a bad collection going on now huh?

Opps forgot my toolclip

Leatherman123 · **Reply #39 on:** July 28, 2008, 04:20:52 PM

Not at all! I have almost every SOG but a Micro Tool Clip and a damn SwitchPlier!

Tarrodemierda · **Reply #40 on:** July 28, 2008, 04:33:13 PM

hey how much could be reasonable valua for used,user toolclip?

Medic82 · **Reply #41 on:** July 28, 2008, 05:25:11 PM

I want Toolclip too

Tarrodemierda · **Reply #42 on:** July 28, 2008, 05:32:08 PM

heads up money men:

http://newyork.craigslist.org/mnh/clt/772659813.html

id buy those clips away immediately but that graigs list is no familiar to me

Biru · **Reply #43 on:** July 28, 2008, 10:15:54 PM

I have a Powerlock. I bought it on impulse during the short time our Wal-Mart carried them (3-4 weeks if that!). I like the workmanship, but there are issues that I think mar the overall impact of the Powerlock on me. I plan on carrying the Powerlock should I begin technical work again. Unless SOG changes their design radically, the Powerlock will probably be my last SOG.

Viper · **Reply #44 on:** July 30, 2008, 10:03:24 AM

Multi-tool-wise I have two Powerlocks (one is standard, the other is a BO EOD model). I also have a Paratool and a Micro Toolclip. Coming soon is a Switchplier.

As far as knives go, I have a Tomcat 3.0, a Topo Meridian (my current EDC knife), a Mini Topo, a Blink, a Twitch II, a fully serrated AirSOG, and a Trident (my first SOG). I also have a SEAL Pup, which, unlike the others, is a fixed blade. I probably have one or two that I'm forgetting.

I also plan to buy more as soon as money allows!

SOG is my favorite company for both knives and multi-tools.

Oh I forgot to list which SOGs I EDC:

At work I'll have my standard Powerlock and a knife (I switch knives more often than tools). When I'm not at work I usually carry either a lighter multi-tool (usually my SwissChamp) or no multi-tool at all, and a knife. For a while I usually carried the Blink or the Twitch II, but now I'm EDCing the Meridian a lot. The SEAL Pup is for activities like camping.

eodtech · **Reply #45 on:** August 03, 2008, 02:00:27 AM

For years I carried a SOG PowerLock on the job, ( as evident by the below photos ) and for years I kept on having to pull my uniform trousers up because of the weight, PL is a heavy tool. Then I discovered the joys of lighter weight tools and tools with pocket clips , ( that can be modified to to allow me to pick and choose what implements I want in my tool ), either factory original or modified pocket clips on the MT.
The tools I carry most now are : SOG Pocket PowerPlier, Swisstool Spirit "S" modified with a pocket clip and a SOG full size Toolclip .

My SOGs - modified YES the above SOG has FOUR cutting blades !!!

Serrated Line Cutter and a "V" cutter This SOG only has 3 cutting blades, "V" cutter + scissors

Medic82 · **Reply #46 on:** August 03, 2008, 05:40:30 AM

Got a Paratool and Powerlock

Tarrodemierda · **Reply #47 on:** September 03, 2008, 12:57:53 AM

Mini tool clip may be on its way.

J-sews · **Reply #48 on:** September 03, 2008, 05:17:46 AM

Quote from: Tarrodemierda on September 03, 2008, 12:57:53 AM

Mini tool clip may be on its way.

News flash: Mini ToolClip is on it's way!

MultiMat · **Reply #49 on:** September 03, 2008, 05:48:21 AM

Speaking of mini ToolClipshttp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=330265653248&ssPageName=STRK:MEWA:IT&ih=014
I was tempted , $37 probably not a bad price.Now if it had been a Toolclip I would be bidding like a madman . Mikko you do not have TWO ToolClips do you ? (lucky Bugger)

Tarrodemierda · **Reply #50 on:** September 03, 2008, 06:43:35 AM

Quote from: MultiMat on September 03, 2008, 05:48:21 AM

Speaking of mini ToolClipshttp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=330265653248&ssPageName=STRK:MEWA:IT&ih=014
I was tempted , $37 probably not a bad price.Now if it had been a Toolclip I would be bidding like a madman . Mikko you do not have TWO ToolClips do you ? (lucky Bugger)

well that from ebay is heading out to finland;)
yes i have both models of toolclip nowadays,theyre the most precious multi´s to me,and i wouldnt have those without this forum :cheers:and its helping members and generousity.

thanks to guys for letting me get those

Tarrodemierda · **Reply #51 on:** September 03, 2008, 06:44:17 AM

Quote from: J-sews on September 03, 2008, 05:17:46 AM

Quote from: Tarrodemierda on September 03, 2008, 12:57:53 AM

Mini tool clip may be on its way.

News flash: Mini ToolClip is on it's way!

(Image removed from quote.)

AWESOME!!!!!!

(at first i didnt even realise it was in pic already

)

MultiMat · **Reply #52 on:** September 03, 2008, 07:04:16 AM

Quote from: Tarrodemierda on September 03, 2008, 06:43:35 AM

Quote from: MultiMat on September 03, 2008, 05:48:21 AM
Speaking of mini ToolClipshttp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=330265653248&ssPageName=STRK:MEWA:IT&ih=014
I was tempted , $37 probably not a bad price.Now if it had been a Toolclip I would be bidding like a madman . Mikko you do not have TWO ToolClips do you ? (lucky Bugger)

well that from ebay is heading out to finland;)
yes i have both models of toolclip nowadays,theyre the most precious multi´s to me,and i wouldnt have those without this forum :cheers:and its helping members and generousity.

thanks to guys for letting me get those

Mate I am glade I did not bid on it , would have sucked if we were bidding against each other. I really like the look of the full side toolclip . Congrats mate on the toolclips , it would be hard not to use those suckers they look so ready to do hard work. Mikko are you going to baby those beauties or are you going to be nasty to them

.

robertrogers · **Reply #53 on:** September 27, 2008, 07:34:11 PM

A sog seal pup that I use almost daily. It has stood up to the harshest of environments from -40F to +100F, high humidity and wetness. A good blade to be sure.