Serrated line cutter?

Viper · **on:** September 22, 2007, 06:49:44 PM

Has anyone ever used this? It isn't talked about a lot, and it doesn't come on any models. I was thinking about getting one, but I wanted to make sure that there wasn't a reason it wasn't popular.

Anthony · **Reply #1 on:** September 22, 2007, 09:02:46 PM

I think the V cutter "replaced" it as a line cutter. I haven't used either so what dop I know though

;D

J-sews · **Reply #2 on:** September 23, 2007, 12:22:32 AM

I've only seen photos of the serrated line cutter. Seems to me it would be MORE useful than the V-cutter. Never had a SOG tool equipped with one though. $:-\$

Viper · **Reply #3 on:** September 23, 2007, 01:09:34 AM

I thought it looked more useful too. I guess I'll have to get that too.

Anthony · **Reply #4 on:** September 23, 2007, 03:45:03 AM

Looks like there's no notch for the lock on the newer tools...one could be Dremeled in easily enough, but it's just an observation

J-sews · **Reply #5 on:** September 23, 2007, 03:50:02 AM

Quote from: Corrugated on September 23, 2007, 03:45:03 AM

Looks like there's no notch for the lock on the newer tools...one could be Dremeled in easily enough, but it's just an observation

Good eye.

Viper · **Reply #6 on:** September 23, 2007, 04:05:37 AM

There's a lock on the current one-

http://sogknives.com/store/S31SLC.html

kwakster · **Reply #7 on:** July 30, 2008, 07:12:41 PM

I have about 10 of these serrated line cutters in my SOG parts box.
If you really need one, let me know,

Viper · **Reply #8 on:** July 31, 2008, 02:11:42 AM

Have you ever used them?

kwakster · **Reply #9 on:** July 31, 2008, 08:24:54 AM

Not yet, but maybe i'm gonna build one into my pocket power plier.

Viper · **Reply #10 on:** July 31, 2008, 05:53:40 PM

Awesome! Well be sure to tell us how you like it!

eodtech · **Reply #11 on:** August 03, 2008, 01:52:45 AM

Quote from: Viper on September 22, 2007, 06:49:44 PM

Has anyone ever used this?

My EDC PowerLock EOD model - eBay acquired for $33.00 last year , I added the Serrated Line Cutter and other tools were swapped out to make it more to my liking - don't leave home without it !

jzmtl · **Reply #12 on:** August 05, 2008, 01:57:17 AM

Does that type of serration work any better than plain edge? Seems to me serration need the point to bite into whatever you are cutting and those wavy patterns doesn't work like that.

Dunc · **Reply #13 on:** September 29, 2008, 09:17:33 PM

I ordered a V-cutter from Heinnie Haynes http://www.heinnie.com/ for my powerlock But they sent me a serrated line cutter . I liked it so thought I'd keep it but it was one of the old ones and didnt have a lock cut into it

I phoned them up and they said no problem just send it back and we'll send you a V-cutter . But when I did the replied they didnt have any in stock ans refunded my money

Hence why I put the scissors back in . The thing is SOG encourages us to buy and swap tools but for us Brits its proving a little hard . Is there anyone on the forum who stocks Sog parts ? I'd prefer to use paypal . Just wondered incase any tools break .

Dunc

kwakster · **Reply #14 on:** September 29, 2008, 10:04:13 PM

Now who could that be ?
Let me think,mmmmmmmmm

Dunc · **Reply #15 on:** September 29, 2008, 10:39:15 PM

Quote from: kwakster on September 29, 2008, 10:04:13 PM

Now who could that be ?
Let me think,mmmmmmmmm

If you know half as much about Sogs that you do about Leatherman

Do you repair Sogs too ?

Dunc

kwakster · **Reply #16 on:** September 30, 2008, 08:21:50 AM

Only now and then, as they aren't sold that much over here.
However, i do have a box with SOG parts,

cgk · **Reply #17 on:** September 30, 2008, 10:20:16 AM

Quote from: kwakster on September 30, 2008, 08:21:50 AM

Only now and then, as they aren't sold that much over here.
However, i do have a box with SOG parts,

Just curious, would a v-cutter fit on a Charge or is it too big? (or just non-compatable)

Dunc · **Reply #18 on:** September 30, 2008, 04:11:43 PM

Quote from: kwakster on September 30, 2008, 08:21:50 AM

Only now and then, as they aren't sold that much over here.
However, i do have a box with SOG parts,

Really

Tell me more

Dunc

kwakster · **Reply #19 on:** September 30, 2008, 05:18:30 PM

Okay, what do you need ?

J-sews · **Reply #20 on:** October 01, 2008, 03:25:16 AM

Quote from: cgk on September 30, 2008, 10:20:16 AM

Quote from: kwakster on September 30, 2008, 08:21:50 AM
Only now and then, as they aren't sold that much over here.
However, i do have a box with SOG parts,

Just curious, would a v-cutter fit on a Charge or is it too big? (or just non-compatable)

Never tried it, but.....I think the pivot hole is the right size. $:-\$ The notch in the back would need to be widened for the Charge toggle lock to function though.

Anthony · **Reply #21 on:** October 08, 2008, 04:10:34 AM

Quote from: kwakster on September 30, 2008, 08:21:50 AM

Only now and then, as they aren't sold that much over here.
However, i do have a box with SOG parts,

Would you happen to have any handles for a Paratool?

Hello Lurker! Remove this ad and much more by logging in.

Serrated line cutter?

Donations

Community Links