Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


111mm SAK Family - Current and Discontinued

Max Stone · 25 · 2279
« previous next »
Pages: 1   Go Down

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
111mm SAK Family - Current and Discontinued
on: May 09, 2019, 12:01:15 AM
Inspired by the feedback I got from the 91mm diagrams I did (made a stickie 91mm SAK Family - Current and Discontinued),

I've now completed a diagram for the 111mm SAK Family.  :salute:

A little more work as the hierarchy is not a tidy as the 91mm family, and I wanted to show liner/slide lock and those with OHO blades. As the 111mm range is a little newer than the 91mm range, I managed to get both the discontinued and current models on one page.

I only have one 111mm in my SAK collection (a Soldier 08), so this diagram will come in useful to consider available options.  :)
Victorinox 111mm Family.jpg
* Victorinox 111mm Family.jpg (Filesize: 137.9 KB)
* Victorinox 111mm Family.pdf (Filesize: 223.12 KB)
« Last Edit: May 09, 2019, 10:15:23 AM by Huntsman »
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

us Offline zrxoa1

  • *
  • No Life Club
  • ******
    • Posts: 4,374
Re: 111mm SAK Family - Current and Discontinued
Reply #1 on: May 09, 2019, 12:05:36 AM
Awesome!!!!  Thanks!!!

Sent from my MotoG3 using Tapatalk

Merit Badges Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with photos of at least 5 different 111mm models in your collection Must start a thread with a photo of your birth year SAK Start a new thread with photos of your Buck knives in use Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of your Mora knives in use Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC

us Offline VICMAN

  • *
  • Zombie Apprentice
  • ********
    • Posts: 12,472
Re: 111mm SAK Family - Current and Discontinued
Reply #2 on: May 09, 2019, 12:39:19 AM
Quote from: Max Stone on May 09, 2019, 12:01:15 AM
Inspired by the feedback I got from the 91mm diagrams I did (made a stickie 91mm SAK Family - Current and Discontinued),

I've now completed a diagram for the 111mm SAK Family.  :salute:


Nice job Max! :like: :tu: :tu:

Thanks! :cheers:
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a MiniChamp SAK for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of at least 8 different 111mm models in your collection Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a Camper SAK for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your camo SAK Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your stayglow SAK

us Offline Myron

  • *
  • No Life Club
  • ******
    • Posts: 2,172
Re: 111mm SAK Family - Current and Discontinued
Reply #3 on: May 09, 2019, 12:40:04 AM
Fantastic!  So generous of you to share this. 
Merit Badges Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Participate  in Challenge thread and post a photo of an Old Cross SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread with photos of at least 5 different 111mm models in your collection Start a new thread and post a picture of a fish or fishing kit with a multitool Must start a thread with a photo of your birth year SAK Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo of your custom ALOX with scissors Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo showing the Hook in use Start a new thread demonstrating paracord knot tying Must start a thread with a photo of at least five (5) of your watches

au Offline Huntsman

  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,596
Re: 111mm SAK Family - Current and Discontinued
Reply #4 on: May 09, 2019, 02:07:26 AM
Hi Max - Another brilliant piece of work

I did a lot of work in the Wiki last year when Vic migrated to solely liner lock
- And I love the way you have managed to show this is the diagram too - And that the slide lock is grey on the converted models   :D   :tu:
On that topic I have spotted one tiny error - The Skipper used to be slide locking and that square is missing

I have also updated the Locksmith in the Wiki, which was not up-to-date post 2017  - Thanks to this   :tu:

And one query - Is the three layer GAK (Trekker variant) retired? As per your diagram?
That could make sense as the Soldier has replaced it - However the Wiki does not say this .... yet!!  - (although does the German Army still want its scales?)

PS. Added to stickied thread

PPS. I couldnot get the link in your post above to work? ???

PPPS. Can we put these diagrams in the Wiki - Or a link to here?
« Last Edit: May 09, 2019, 02:13:33 AM by Huntsman »
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Must put something in order and provide link to the post. Start a new thread with a photo of custom or non standard SAK scales in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: 111mm SAK Family - Current and Discontinued
Reply #5 on: May 09, 2019, 06:48:26 AM
Hi Huntsman, thanks for the feedback.  :hatsoff:

Happy for these diagrams to go to the Wiki pages. But give me a few hours to correct the error on the Skipper and I'll repost. (Will do it tonight).

Not sure about the OH GAK availability. Maybe someone on the forum can comment?

Sorry about the broken link to the other diagram. This works: https://forum.multitool.org/index.php/topic,81456.0.html

Cheers,  :salute:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

00 Offline Thunderpants

  • No Life Club
  • ******
    • Posts: 3,281
Re: 111mm SAK Family - Current and Discontinued
Reply #6 on: May 09, 2019, 09:53:16 AM
Great stuff, Max!

I can't believe they renamed the Nomad the Picnicker... I mean what would you rather have in your pocket, come the zombie apocalypse? The guy or gal with the Nomad in his or her pocket is going to have a huge psychological edge over the chump with the Picnicker. That's all I'm sayin'!
Merit Badges Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo showing the Hook in use Start a new thread with photos of at least 5 different 130mm models in your collection Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days.

spam Offline comis

  • *
  • *
  • Zombie Apprentice
  • ********
    • Posts: 11,206
Re: 111mm SAK Family - Current and Discontinued
Reply #7 on: May 09, 2019, 10:10:57 AM
Quote from: Thunderpants on May 09, 2019, 09:53:16 AM
Great stuff, Max!

I can't believe they renamed the Nomad the Picnicker... I mean what would you rather have in your pocket, come the zombie apocalypse? The guy or gal with the Nomad in his or her pocket is going to have a huge psychological edge over the chump with the Picnicker. That's all I'm sayin'!


Actually, come to think about it...it's all about the mindset.  Come zombie apocalypse, would you rather stay with someone:


1) Avoiding trouble and runs away like a Nomad, or


2) See this whole thing as Picnick...and eats everything :D


I guess I only learnt everything about Zombie from Walking Dead, so 1) could very well be the right choice too.  :think:
Merit Badges Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Start a new thread and post a photo of an Executive or Director for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a 'folding hunter' knife that isn't a Buck 110 for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a Victorinox 91mm XAVT/XL/XLT, 111mm Workchamp XL, Wenger/Delemont S54/Tool Chest Plus or Wenger Giant for thirty (30) consecutive days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Vic Spirit MT for sixty (60) consecutive days.

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: 111mm SAK Family - Current and Discontinued
Reply #8 on: May 09, 2019, 11:12:45 AM
Picnicker could be useful...maybe?  :pok:
36EB7BB1-A499-409A-B199-CCE1EE9A1421.jpeg
* 36EB7BB1-A499-409A-B199-CCE1EE9A1421.jpeg (Filesize: 184.29 KB)
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

00 Offline Thunderpants

  • No Life Club
  • ******
    • Posts: 3,281
Re: 111mm SAK Family - Current and Discontinued
Reply #9 on: May 09, 2019, 11:34:00 AM
I rest my case!
Merit Badges Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo showing the Hook in use Start a new thread with photos of at least 5 different 130mm models in your collection Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days.

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: 111mm SAK Family - Current and Discontinued
Reply #10 on: May 09, 2019, 06:56:37 PM
Quote from: Max Stone on May 09, 2019, 06:48:26 AM
Hi Huntsman, thanks for the feedback.  :hatsoff:

Happy for these diagrams to go to the Wiki pages. But give me a few hours to correct the error on the Skipper and I'll repost. (Will do it tonight).

Not sure about the OH GAK availability. Maybe someone on the forum can comment?

Sorry about the broken link to the other diagram. This works: https://forum.multitool.org/index.php/topic,81456.0.html

Cheers,  :salute:

OK Huntsman - I've correct the diagram. The Skipper now showing slide-lock historic feature.

I was not able to find any info on a new knife contract issued by the Bundeswehr (German Army) since the original OH-GAK contract that's now 15+ years old. But I guess it's still the official military knife, so I've relisted it as 'current'.

So you're good-to-go with this diagram now.  :tu:

Victorinox 111mm Family.jpg
* Victorinox 111mm Family.jpg (Filesize: 138.66 KB)
* Victorinox 111mm Family.pdf (Filesize: 223.18 KB)
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

au Offline Huntsman

  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,596
Re: 111mm SAK Family - Current and Discontinued
Reply #11 on: May 10, 2019, 01:54:12 AM
Thanks Max - Couple of other suggestions - Sorry to be a pain ..... and only suggestions ......

You could change:
  • Except for identifying the back tool (corkscrew or Phillips screwdriver) no other back tools are listed and no other Scale tools or Scale material/colour variations are listed
to ......
  • All tools, except the single-layer tools and the Hunters, contain the awl, plus the corkscrew or Phillips screwdriver (optional .....as indicated, no other back tools are listed)
  • No other scale tools or scale material/colour variations are listed
On the optional statement - I think it is only the WorkChamp that has any other backtools - So that could just be ignored? ???  :think:  !!!
I guess you could even leave out  plus the corkscrew or Phillips screwdriver - as these are clearly shown in the diagram!
Note: No capital on scale !!!


Also how about adding the OHO and lock icons to the icon list (title may have to be changed) and the text comment could then be dropped

Anyway -  Just suggestions - Time for me to shut up -  :twak: - It's up to you -  - It's brilliant as it is 
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Must put something in order and provide link to the post. Start a new thread with a photo of custom or non standard SAK scales in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: 111mm SAK Family - Current and Discontinued
Reply #12 on: May 10, 2019, 06:24:32 AM
I agree Huntsman with your good suggestions. I can do these tonight when back at home. Thanks again for the input and constructive feedback!  :tu:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: 111mm SAK Family - Current and Discontinued
Reply #13 on: May 10, 2019, 10:24:54 PM
Quote from: Huntsman on May 10, 2019, 01:54:12 AM
Thanks Max - Couple of other suggestions - Sorry to be a pain ..... and only suggestions ......

You could change:
  • Except for identifying the back tool (corkscrew or Phillips screwdriver) no other back tools are listed and no other Scale tools or Scale material/colour variations are listed
to ......
  • All tools, except the single-layer tools and the Hunters, contain the awl, plus the corkscrew or Phillips screwdriver (optional .....as indicated, no other back tools are listed)
  • No other scale tools or scale material/colour variations are listed
On the optional statement - I think it is only the WorkChamp that has any other backtools - So that could just be ignored? ???  :think:  !!!
I guess you could even leave out  plus the corkscrew or Phillips screwdriver - as these are clearly shown in the diagram!
Note: No capital on scale !!!


Also how about adding the OHO and lock icons to the icon list (title may have to be changed) and the text comment could then be dropped

Anyway -  Just suggestions - Time for me to shut up -  :twak: - It's up to you -  - It's brilliant as it is

OK, updated! It's much better now  :tu:

Added an MTO logo too, as this diagram belongs to the community.
Victorinox 111mm Family.jpg
* Victorinox 111mm Family.jpg (Filesize: 148.33 KB)
* Victorinox 111mm Family.pdf (Filesize: 236.18 KB)
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

00 Offline Thunderpants

  • No Life Club
  • ******
    • Posts: 3,281
Re: 111mm SAK Family - Current and Discontinued
Reply #14 on: May 11, 2019, 12:49:59 AM
Round of applause for Max!
Merit Badges Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least three BO tools Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo showing the Hook in use Start a new thread with photos of at least 5 different 130mm models in your collection Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days.

nz Offline Sawl Goodman

  • *
  • Hero Member
  • *****
    • Posts: 915
  • Between this & that.
Re: 111mm SAK Family - Current and Discontinued
Reply #15 on: May 11, 2019, 05:41:01 AM
You're starting to get very good at this, Max! :P

You can see from your work that the 111mm family has expanded as the other ranges have contracted: it must be where the money is these days. :think:
Rambler

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: 111mm SAK Family - Current and Discontinued
Reply #16 on: May 11, 2019, 10:19:58 AM
Thanks TP, Sawl.   :tu:

The diagram logic seems to work so I will work through the rest of the families as I get time. Hunter has offered to put the ones I’ve done so far up on the Wiki, so I’m pleased that I can contribute in a small way to building the knowledge resource.  :hatsoff:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

au Offline Huntsman

  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,596
Re: 111mm SAK Family - Current and Discontinued
Reply #17 on: May 16, 2019, 07:45:38 AM
I am not so familiar with dealing with PDFs in the Wiki   :pok:

Anyway I put it here:
https://sakwiki.com/tiki-index.php?page=Victorinox+111mm
Bottom of first section - As you will see - You click to view/download the PDF

What do people think? Is this a good way to do it ?   ???
Or should we show the image actually in the page  -
Or click to immediately view an image?
Or maybe both - ie click to immediately see image - Then another button to download the PDF

Hmm ..... choices ..... choices!!!    :think:
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Must put something in order and provide link to the post. Start a new thread with a photo of custom or non standard SAK scales in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: 111mm SAK Family - Current and Discontinued
Reply #18 on: May 16, 2019, 08:11:42 AM
Maybe the 3rd option, visible image when you land of the page, with a link below the image to the PDF?
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

au Offline Huntsman

  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,596
Re: 111mm SAK Family - Current and Discontinued
Reply #19 on: May 16, 2019, 09:06:47 AM
Thatt's a  fourth option!!

My option three you still click to see an image (it's done quite a bit in the variations sections of the Wiki to show additional images ) - But images come up immediately - And there would also be a link/click to click on to get the PDF and an extra click to download/open

Maybe the fourth option is best - If so - I would upload the image as well and show it in a new section at the bottom of the page along with a link for the PDF....
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Must put something in order and provide link to the post. Start a new thread with a photo of custom or non standard SAK scales in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: 111mm SAK Family - Current and Discontinued
Reply #20 on: May 16, 2019, 09:25:48 AM
Option 4 could work. Gives visibility to the diagram as an image with the option to access the higher-res pdf if needed.  :tu:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

au Offline Huntsman

  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,596
Re: 111mm SAK Family - Current and Discontinued
Reply #21 on: May 26, 2019, 05:38:56 AM
Better ?   ???  - I think so  !!

https://sakwiki.com/tiki-index.php?page=Victorinox+111mm

Will get onto 91mm next
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Must put something in order and provide link to the post. Start a new thread with a photo of custom or non standard SAK scales in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: 111mm SAK Family - Current and Discontinued
Reply #22 on: May 26, 2019, 10:53:23 AM
That really works well and looks good (if I say so myself)  :pok:

Thanks Huntsman.  :cheers:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

nz Offline zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,754
Re: 111mm SAK Family - Current and Discontinued
Reply #23 on: May 28, 2019, 12:54:10 AM
Sorry Max mate but that one is reserved for the peeps (editors) with their fingers in the sand box.
I do feel however that contributing content like you have is badge worthy.
We will discuss it backstage and see what happens.

:cheers:
:cheers:

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: 111mm SAK Family - Current and Discontinued
Reply #24 on: May 28, 2019, 05:59:20 AM
Thanks zoidberg  :popcorn:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $122.41
PayPal Fees: $6.85
Net Balance: $115.56
Below Goal: $184.44
Site Currency: USD
39% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal