Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


MUT with Surge upgrades

x-iled · 25 · 1104
« previous next »
Pages: 1   Go Down

sg Offline x-iled

  • Newbie
  • *
    • Posts: 31
MUT with Surge upgrades
on: October 12, 2019, 03:45:58 PM
Hi all, first post here. I got bit by the modding bug after seeing all these wonderful mods and i wanted to give i a try. Here is what i have done to the MUT

1. surge scissors - swapped out the saw blade for the surge scissors.need to work on the locking mech as it is a tad shorter than the surge locking spring. The spring lever needs added width so that it can lock into place when the scissors fully opens up.

2. Surge T shank adapter - swapped out the Punch tool for this. Had to dremel a section of the frame out to fit the parts but well worth the effort. saw blade is fully enclosed with in the space and the location of the pocket clip acts as a shield for the fingers when in pliers mode. gotta work on the retention as well and i have a plan for it already, just need to get it to a welding table.

3. elongated side bits holder - hey... they gave a short and a long bit... why bother keeping the short one... lol...

4. t shank file storage - removed the plastic pieces at the bronze carbon scrapper area and surprisingly the space is just nice for the file that came with the surge. The scrapper acts as a retention device being quite tight to begin with. the file is held by friction and it doesnt move unless u flip out the scrapper. very nice.

So i basically turned the MUT into a edc tool for construction/ contractor work. I like the MUT for its looks and its hammer function is applicable to my profession. But being in singapore, having a tool specifically for gun related maintenance is kinda redundant since we dont allow guns here lol. So THIS makes the MUT so much more applicable to my environment lol. loving every sec of it. Will update when i have fully resolved the retention issues and the new parts work like they should.

here is the album https://imgur.com/a/uaLzde2



and heres a pic to show the surge DNA lol
« Last Edit: October 12, 2019, 03:59:48 PM by x-iled »

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: MUT with Surge upgrades
Reply #1 on: October 12, 2019, 03:50:52 PM
What an entrance  :hatsoff:.  Welcome to MTO.  Love the MUT too and yours even more.  Well done, very well done  :like:
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with photos of at least 5 different Juice models in your collection Start a new thread with photos of a Japanese made PST in your collection Start a thread with a photo of at least ten OPT's in your collection

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: MUT with Surge upgrades
Reply #2 on: October 12, 2019, 04:46:47 PM
Welcome to  :MTO: :cheers:
Excellent work on the MUT :like: :tu:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

sg Offline x-iled

  • Newbie
  • *
    • Posts: 31
Re: MUT with Surge upgrades
Reply #3 on: October 13, 2019, 02:00:39 AM
Quote from: Wspeed on October 12, 2019, 04:46:47 PM
Welcome to  :MTO: :cheers:
Excellent work on the MUT :like: :tu:

Quote from: Aloha on October 12, 2019, 03:50:52 PM
What an entrance  :hatsoff:.  Welcome to MTO.  Love the MUT too and yours even more.  Well done, very well done  :like:

Hey! Thanks for the compliments dudes! First time modding a leatherman, so when everything fits in with minor modification, u can imagine how stoked I was lol. Just couldn't contain the urge to "showoff" hahahha.

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: MUT with Surge upgrades
Reply #4 on: October 13, 2019, 01:42:58 PM
Thanks for showing it off x-iled  :like: :tu:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: MUT with Surge upgrades
Reply #5 on: October 13, 2019, 02:42:20 PM
 :like:

Why do our good friend Wspeed have so many bananas?
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: MUT with Surge upgrades
Reply #6 on: October 13, 2019, 03:10:15 PM
I have reached 60K posts so I am no
longer nuts I am now just bananas  :D
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

sg Offline x-iled

  • Newbie
  • *
    • Posts: 31
Re: MUT with Surge upgrades
Reply #7 on: October 14, 2019, 07:35:44 PM
added a victorinox tweezers! because i had previously filed down the bit storage plastic piece to  house the longer bit, it was too thin in my opinion to safely carve out the tunnel for the tweezers. I cut up the existing side plastic piece for the pin pusher and made it fit like a stopper for the longer bit. This doubles up as extra thickness for the tunnel carving lol.






and added grip tape to the t shank. huge improvement in thumb flip lol.


gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: MUT with Surge upgrades
Reply #8 on: October 14, 2019, 08:13:36 PM
Nice job  :like: :tu:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

sg Offline x-iled

  • Newbie
  • *
    • Posts: 31
Re: MUT with Surge upgrades
Reply #9 on: October 16, 2019, 11:34:36 AM
decided to swap out the surge scissors for a victorinox one. but i put it at the bronze scrapper location as i have some plans for the current scissors location. Got a stainless steel spacer cut to shape and then had it lazer welded... damn pretty welds by the welder.. extremely happy with how this turned out.








gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: MUT with Surge upgrades
Reply #10 on: October 16, 2019, 01:19:29 PM
That looks really good especially the welding  :like: :tu:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: MUT with Surge upgrades
Reply #11 on: October 16, 2019, 01:22:57 PM
Quote from: x-iled on October 16, 2019, 11:34:36 AM
decided to swap out the surge scissors for a victorinox one. but i put it at the bronze scrapper location as i have some plans for the current scissors location. Got a stainless steel spacer cut to shape and then had it lazer welded... damn pretty welds by the welder.. extremely happy with how this turned out.

 
(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

If u drilled out the pivot hole on the Vic scissors, it will also fit there.

:salute: I think this is the first time someone did a proper pivot for a Vic scissors to be fitted on a LM.  :tu:
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

sg Offline x-iled

  • Newbie
  • *
    • Posts: 31
Re: MUT with Surge upgrades
Reply #12 on: October 16, 2019, 01:59:52 PM
Quote from: Sam Lim on October 16, 2019, 01:22:57 PM
If u drilled out the pivot hole on the Vic scissors, it will also fit there.

:salute: I think this is the first time someone did a proper pivot for a Vic scissors to be fitted on a LM.  :tu:

I dont think it can be done for the MUT scrapper side pin. That hole required is 7mm..something thats different on the MUT. I think the pin only slides in from the scrapper side cuz the other end is the smaller 5.5mm pin.

 if I were to bore out the vic scissors I'll be dangerously close to the edge..

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: MUT with Surge upgrades
Reply #13 on: October 16, 2019, 03:33:09 PM
Quote from: x-iled on October 16, 2019, 01:59:52 PM
I dont think it can be done for the MUT scrapper side pin. That hole required is 7mm..something thats different on the MUT. I think the pin only slides in from the scrapper side cuz the other end is the smaller 5.5mm pin.

 if I were to bore out the vic scissors I'll be dangerously close to the edge..

Oh.. Could be my bad. Could be on the other end on the punch side... Really nice work on the welding boss.
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: MUT with Surge upgrades
Reply #14 on: October 16, 2019, 03:50:47 PM
Clean job on the welding.  The Vic scissors are great as are the Surge scissors.  Did I miss why you didn't try them?

This is really nice mod on the MUT  :hatsoff:
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with photos of at least 5 different Juice models in your collection Start a new thread with photos of a Japanese made PST in your collection Start a thread with a photo of at least ten OPT's in your collection

sg Offline x-iled

  • Newbie
  • *
    • Posts: 31
Re: MUT with Surge upgrades
Reply #15 on: October 16, 2019, 04:03:37 PM
Quote from: Sam Lim on October 16, 2019, 03:33:09 PM
Oh.. Could be my bad. Could be on the other end on the punch side... Really nice work on the welding boss.

Nah that's alright lol.. ultimately modders are the ones finding out what fits and what doesn't hahaha.. all for the progress of the community!

sg Offline x-iled

  • Newbie
  • *
    • Posts: 31
Re: MUT with Surge upgrades
Reply #16 on: October 16, 2019, 04:06:07 PM
Quote from: Aloha on October 16, 2019, 03:50:47 PM
Clean job on the welding.  The Vic scissors are great as are the Surge scissors.  Did I miss why you didn't try them?

This is really nice mod on the MUT  :hatsoff:

Oh I only had a surge previously and was trying to make the most of it. When I realised I had plans for where I initially put the scissors, I had to change out the location and the surge scissors spring mech can be quite a hassle to make it work on a pin that doesn't have the locking spring. Lol.. so i went and bought a victorinox outrider to transplant its scissors lol

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: MUT with Surge upgrades
Reply #17 on: October 16, 2019, 04:09:32 PM
 :tu:.
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with photos of at least 5 different Juice models in your collection Start a new thread with photos of a Japanese made PST in your collection Start a thread with a photo of at least ten OPT's in your collection

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: MUT with Surge upgrades
Reply #18 on: October 17, 2019, 03:06:02 PM
Quote from: x-iled on October 16, 2019, 04:03:37 PM
Nah that's alright lol.. ultimately modders are the ones finding out what fits and what doesn't hahaha.. all for the progress of the community!

 :tu: do stay around. Not many people around from your part of the world. Can't wait to see what other projects you have in mind.   :cheers:
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: MUT with Surge upgrades
Reply #19 on: October 17, 2019, 03:26:05 PM
 :iagree:
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with photos of at least 5 different Juice models in your collection Start a new thread with photos of a Japanese made PST in your collection Start a thread with a photo of at least ten OPT's in your collection

sg Offline x-iled

  • Newbie
  • *
    • Posts: 31
Re: MUT with Surge upgrades
Reply #20 on: October 18, 2019, 06:53:20 AM
yes its me again.. lol.. i tell ya, ive been bit hard by the mod bug... heres another one fresh from the welding table... i got inspired by diresta's whichblade 2 and i made a ratchet attachement to be fitted to the MUT hammer. still need to clean it up and pretty it up properly but this works. and also.. i need to think of a way to lock the attachment in.. currently its only friction ffitted.











and heres a vid of it being deployed lol




« Last Edit: October 18, 2019, 07:20:59 AM by x-iled »

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: MUT with Surge upgrades
Reply #21 on: October 18, 2019, 01:21:45 PM
Nice job again looks great  :like: :tu:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,019
Re: MUT with Surge upgrades
Reply #22 on: October 23, 2019, 12:48:55 PM
Welcome to :MTO: x-iled :cheers: Some very awesome mods 8) Thanks for sharing and that weld on those scissors looks crazy good :o :like:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 67,621
Re: MUT with Surge upgrades
Reply #23 on: October 23, 2019, 02:05:06 PM
Welcome to the forum and great job on the mods !    :hatsoff:   
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

us Offline Rapidray

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 24,490
Re: MUT with Surge upgrades
Reply #24 on: February 01, 2020, 03:53:25 AM
 :iagree: Some great mods and video!  :like: :cheers:
Merit Badges Must start a thread with a photo of your birth year SAK Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Must start a thread with a photo of your stayglow SAK Start a new thread with photos of at least 8 different 111mm models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread and post a picture of a fish or fishing kit with a multitool Must start a thread with a photo of your EDC watch Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the Vic Huntsman for thirty (30) consecutive days.

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $152.99
PayPal Fees: $8.68
Net Balance: $144.31
Below Goal: $155.69
Site Currency: USD
48% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal