Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)

Megan · 98 · 8255
« previous next »
Pages: 1 2 3 4   Go Down

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #30 on: January 23, 2020, 09:46:11 PM
Think the Cork version is a can opener.

I guess the stubby pry bar will only be effective if used in one direction?

Hope that Gerber don’t carry the nasty laser engraved GEBER text that’s halfway down the blade into product.

But the overall design is very original.  :like:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

us Offline ElevenBlade

  • *
  • No Life Club
  • ******
    • Posts: 3,121
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #31 on: January 25, 2020, 02:27:57 AM
Quote from: Happy Gilmore on January 23, 2020, 08:05:07 PM
Gerber is the company that COULD provide real competition..the Armbar is seriously well designed...but pocket clip ????!?!?!? Come on guys...


The One that really makes me  :drool: :drool: :drool: is the lockdown though.

I'm decidedly anti-pocket-clip except for cases like this....  This looks like it will get snagged on something on/in the pocket on the way out.  Surely there must be some way...

Merit Badges Participate in a challenge by carrying  a Combo Edged knife or Multitool and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Must put something in order and provide link to the post.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,013
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #32 on: January 28, 2020, 11:56:23 AM
Is Spring 2020 here yet :ahhh I really want to see these guys in person :dd: :like:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline JBW1

  • No Life Club
  • ******
    • Posts: 1,353
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #33 on: January 28, 2020, 09:43:02 PM
 :gimme: :o

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #34 on: January 28, 2020, 10:14:29 PM
Quote from: Poncho65 on January 28, 2020, 11:56:23 AM
Is Spring 2020 here yet :ahhh I really want to see these guys in person :dd: :like:
:iagree:
How can we get first offers in?
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #35 on: January 29, 2020, 02:53:44 PM
Poncho you mention your Charge knife and I see the DNA in the Armbar.  Whats nice is the size as compared to the 91mm SAK.  That 1/4 driver is a serious win in such a small compact package  :like:
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Must have a review written in the proper format and posted on the Main Site Start a new thread and post a picture of fire making kit or fire with a multitool Start a thread with a photo of at least ten OPT's in your collection Start a thread with photos of at least 5 different Juice models in your collection Start a new thread with photos of a Japanese made PST in your collection

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,013
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #36 on: January 30, 2020, 04:20:54 AM
 :iagree: Not been this excited about something from Gerber in a long while :cheers: :like:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,904
  • I may get older but I refuse to grow up.
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #37 on: February 01, 2020, 09:34:09 PM
I'm a little disapointed that the driver isn't locking, they say everithing locks except the driver which is a slipjoint :facepalm:

I'd rather have a locking screwdriver and a slippie blade :whistle:
Merit Badges Must start a thread with a photo of at least five (5) of your watches Start a new thread with a photo of a modded knife or multitool with your EDC Must update or add a page on the Multitool.org Multitool Encyclopedia Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must buy something on EDCSource Must put something in order and provide link to the post. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a thread with photos of at least 5 different Juice models in your collection Must update or add a page on SAKWiki

au Offline Huntsman

  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,607
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #38 on: February 01, 2020, 10:04:18 PM
^^^    TOO TRUE      :pok:
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Must put something in order and provide link to the post.

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #39 on: February 01, 2020, 10:27:48 PM
As long as the snap is as good as say the Philips on an Explorer, I don’t think I will have an issue with that.  :think:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #40 on: February 02, 2020, 10:56:36 AM
 Veeeeeerrrrrrrryyyyyy exciting! Looks like a proper serious contender to the SAK. Love Gerbers designs.
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

ie Offline McStitchy

  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 19,785
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #41 on: February 02, 2020, 11:05:19 AM
Quote from: enki_ck on February 01, 2020, 09:34:09 PM
I'm a little disapointed that the driver isn't locking, they say everithing locks except the driver which is a slipjoint :facepalm:

I'd rather have a locking screwdriver and a slippie blade :whistle:

I know what you mean.
Though the design of the bit driver is not a straight line. It looks to me that pressure onto it would not cause it to flip close easily  :dunno:
1052452_1.jpg
* 1052452_1.jpg (Filesize: 127.29 KB)
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must put something in order and provide link to the post. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Test,please ignore Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days.

us Offline ElevenBlade

  • *
  • No Life Club
  • ******
    • Posts: 3,121
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #42 on: February 02, 2020, 02:24:07 PM
Quote from: McStitchy on February 02, 2020, 11:05:19 AM
I know what you mean.
Though the design of the bit driver is not a straight line. It looks to me that pressure onto it would not cause it to flip close easily  :dunno:

If you'll permit me to play at Armchair Engineer...

The tool is offset so it's in-line like the Center Drive.  This should help keep the vector of force straight back, and there should be less of a chance of it folding during use. That's my guess.
Merit Badges Participate in a challenge by carrying  a Combo Edged knife or Multitool and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Must put something in order and provide link to the post.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #43 on: February 02, 2020, 03:43:42 PM
Any infos yet on when they are supposed to be in stores? I know they said spring 2020, but that could be everything from March to May  :popcorn:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,013
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #44 on: February 02, 2020, 04:39:13 PM
Quote from: enki_ck on February 01, 2020, 09:34:09 PM
I'm a little disapointed that the driver isn't locking, they say everithing locks except the driver which is a slipjoint :facepalm:

I'd rather have a locking screwdriver and a slippie blade :whistle:

 :iagree: :facepalm: but if it is pocketable enough then I can overlook that :salute:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

ca Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • *
  • Just Bananas
  • *
    • Posts: 65,941
  • Optimum instrumentum est inter aures
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #45 on: February 02, 2020, 11:17:09 PM
If you need to know more about the Armbar Cork and Driver models, or you just need more Megan in your life, check this out:



Def
Leave the dents as they are- let your belongings show their scars as proudly as you do yours.
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Start a thread with a photo of at least ten OPT's in your collection Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least eight BO tools Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread with a photo of at least 5 different Charge models in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #46 on: February 02, 2020, 11:23:37 PM
These are going to be popular...  :popcorn:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

ie Offline McStitchy

  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 19,785
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #47 on: February 02, 2020, 11:30:42 PM
 :like:
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must put something in order and provide link to the post. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Test,please ignore Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days.

ca Offline Grant Lamontagne

  • Head Turd Polisher
  • Administrator
  • *
  • Just Bananas
  • *
    • Posts: 65,941
  • Optimum instrumentum est inter aures
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #48 on: February 02, 2020, 11:36:47 PM
Quote from: Max Stone on February 02, 2020, 11:23:37 PM
These are going to be popular...  :popcorn:

Megan was really taken with them, and I have to say I think I really like the streamlined design as well.  They kind of remind me of the Leatherman "Half a Juice" models, except that they seem complete... unlike the Half a Juice models where I felt like I was paying for a whole tool, and only getting part!

Def
Leave the dents as they are- let your belongings show their scars as proudly as you do yours.
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Start a thread with a photo of at least ten OPT's in your collection Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least eight BO tools Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread showing photos of your outdoor cooking Must have a review written in the proper format and posted on the Main Site Start a new thread with a photo of at least 5 different Charge models in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #49 on: February 03, 2020, 09:51:41 AM
👍
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #50 on: February 03, 2020, 04:45:36 PM
I'm liking this more and more.  Nicely done Megan  :salute:
Esse Quam Videri
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least eight BO tools Start a new thread showing photos of your outdoor cooking Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Must have a review written in the proper format and posted on the Main Site Start a new thread and post a picture of fire making kit or fire with a multitool Start a thread with a photo of at least ten OPT's in your collection Start a thread with photos of at least 5 different Juice models in your collection Start a new thread with photos of a Japanese made PST in your collection

spam Offline Happy Gilmore

  • No Life Club
  • ******
    • Posts: 1,065
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #51 on: February 03, 2020, 06:46:33 PM
This was the quitest gear release ever! I just checked and they are now available on Gerber’s webside  :facepalm: :facepalm:

 :gimme: :gimme:

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #52 on: February 03, 2020, 07:42:40 PM
Major kudos to first member to post theirs - wish I was in the US to order one!  :popcorn:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #53 on: February 03, 2020, 09:39:42 PM
 :woohoo: Will order one later  :D
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #54 on: February 03, 2020, 10:36:40 PM
Couldn't wait, it is ordered  :D :woohoo:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #55 on: February 04, 2020, 07:22:14 AM
Great Sir Vic.  :popcorn:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

spam Offline Happy Gilmore

  • No Life Club
  • ******
    • Posts: 1,065
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #56 on: February 04, 2020, 02:18:35 PM
Talking to gerber to send me one for review, that way all I have to do is buy the other for a real comparison. I have really high hopes for this tool.

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #57 on: February 04, 2020, 05:56:19 PM
yes please! We need some good-old MTo critiques on these.  :popcorn:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

au Offline Huntsman

  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,607
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #58 on: February 04, 2020, 08:01:51 PM
Quote from: SirVicaLot on February 02, 2020, 03:43:42 PM
Any infos yet on when they are supposed to be in stores? I know they said spring 2020, but that could be everything from March to May  :popcorn:

....... Or September to November  !!!    :pok:     ???     :D
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Must put something in order and provide link to the post.

au Offline Huntsman

  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,607
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #59 on: February 04, 2020, 08:06:19 PM
Quote from: Aloha on February 03, 2020, 04:45:36 PM
I'm liking this more and more.  Nicely done Megan  :salute:
:iagree:
Quote from: Max Stone on February 03, 2020, 07:42:40 PM
Major kudos to first member to post theirs - wish I was in the US to order one!  :popcorn:
:iagree:
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Must put something in order and provide link to the post.

Pages: 1 2 3 4   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $152.99
PayPal Fees: $8.68
Net Balance: $144.31
Below Goal: $155.69
Site Currency: USD
48% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal