Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)

Megan · 98 · 8257
« previous next »
Pages: 1 2 3 4   Go Down

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #60 on: February 05, 2020, 04:19:23 AM
I had hoped that Gerber would ship my order today, but never received a confirmation. Hope this won’t take forever  :dunno:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #61 on: February 05, 2020, 04:26:24 AM
Nevermind, the email just came in. Apparently it wasn’t synching correct with my phone  :facepalm:

No idea when it will show up here. Looks like carrier tracking is down  :ahhh
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #62 on: February 05, 2020, 05:53:51 AM
The suspense!  :popcorn:
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #63 on: February 05, 2020, 06:04:25 AM
I know! Hate and love it at the same time  :ahhh :D
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #64 on: February 05, 2020, 03:36:04 PM
Tracking is working again. Should be here Friday :woohoo:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

spam Offline Happy Gilmore

  • No Life Club
  • ******
    • Posts: 1,065
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #65 on: February 05, 2020, 04:27:40 PM
Quote from: SirVicaLot on February 05, 2020, 03:36:04 PM
Tracking is working again. Should be here Friday :woohoo:

Excited to see it, but I think its probably a major win for gerber, the tool selection...size, choice of tools. Really amazing, the only question for me is can the scissor compete.

On a side note...I already think I have a pocket clip solution  :tu:

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #66 on: February 05, 2020, 05:58:59 PM
Great! I think I have an idea too. Should be able to use the same dangler method I use for my SAKs. Testing will commence Friday  :popcorn:
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #67 on: February 05, 2020, 06:25:01 PM
 :popcorn: this is genuinely exciting!
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

ie Offline Don Pablo

  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,292
  • Yoo-hoo, big summer blowout!
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #68 on: February 05, 2020, 06:31:25 PM
:ahhh
Hooked, like everyone else. ;)

All hail the hook!
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days.

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #69 on: February 05, 2020, 06:38:39 PM
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

ie Offline McStitchy

  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 19,785
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #70 on: February 05, 2020, 06:45:14 PM
 :ahhh  :ahhh  :ahhh
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must put something in order and provide link to the post. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Test,please ignore Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days.

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #71 on: February 05, 2020, 06:59:07 PM
Thats three of us!
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

ie Offline Don Pablo

  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,292
  • Yoo-hoo, big summer blowout!
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #72 on: February 05, 2020, 07:00:27 PM
And three's an entire company!
Hooked, like everyone else. ;)

All hail the hook!
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days.

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #73 on: February 05, 2020, 07:08:11 PM
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

us Offline ElevenBlade

  • *
  • No Life Club
  • ******
    • Posts: 3,121
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #74 on: February 05, 2020, 08:10:30 PM
Quote from: SirVicaLot on February 05, 2020, 05:58:59 PM
Great! I think I have an idea too. Should be able to use the same dangler method I use for my SAKs. Testing will commence Friday  :popcorn:

you mean like a P-7 suspension clip?  I don't see where it would attach, but I can't quite tell from pictures.   

Also - a general question - Are we reasonably confident that the pommel is constructed of hard enough metal to be used to hammer a nail....  before I go testing that functionality for review purposes and destroy the tool....   :dwts:
Merit Badges Participate in a challenge by carrying  a Combo Edged knife or Multitool and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Must put something in order and provide link to the post.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.

ie Offline McStitchy

  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 19,785
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #75 on: February 05, 2020, 08:16:06 PM
Of course we're not. That's why we have you!







...be careful though  :salute:
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must put something in order and provide link to the post. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Test,please ignore Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days.

us Offline ElevenBlade

  • *
  • No Life Club
  • ******
    • Posts: 3,121
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #76 on: February 05, 2020, 08:20:05 PM
Quote from: McStitchy on February 05, 2020, 08:16:06 PM
Of course we're not. That's why we have you!

(Image removed from quote.)





...be careful though  :salute:

 :cheers:

I'll report on the results as soon as I get mine. 

For Science!

 :salute:
Merit Badges Participate in a challenge by carrying  a Combo Edged knife or Multitool and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Must put something in order and provide link to the post.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,019
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #77 on: February 05, 2020, 08:53:52 PM
Quote from: magentus on February 05, 2020, 06:59:07 PM
Thats three of us!

Add another :ahhh Best thing I have seen from Gerber in a long while that really got my attention :like: :like: The CD was good but just never could bring myself to pull the trigger on one :whistle: Hope to have one of these in the next while as well :dd: :salute:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

ie Offline McStitchy

  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 19,785
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #78 on: February 05, 2020, 09:00:57 PM
Quote from: ElevenBlade on February 05, 2020, 08:20:05 PM
:cheers:

I'll report on the results as soon as I get mine. 

For Science!

 :salute:

 :cheers:   ... seriously though... stop before it could break.
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must put something in order and provide link to the post. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Test,please ignore Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,019
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #79 on: February 05, 2020, 09:01:42 PM
For those that haven't ordered yet there is a coupon code that will save you some :salute: ELKTALK hope this works for you guys :cheers:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

ie Offline Don Pablo

  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,292
  • Yoo-hoo, big summer blowout!
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #80 on: February 05, 2020, 09:02:52 PM
Quote from: Poncho65 on February 05, 2020, 08:53:52 PM
Add another :ahhh Best thing I have seen from Gerber in a long while that really got my attention :like: :like: The CD was good but just never could bring myself to pull the trigger on one :whistle: Hope to have one of these in the next while as well :dd: :salute:
One of us. One of us. One of us! :D
Hooked, like everyone else. ;)

All hail the hook!
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days.

ie Offline McStitchy

  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 19,785
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #81 on: February 05, 2020, 09:09:31 PM
The new "crew" is building up fast Mags :salute:
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must put something in order and provide link to the post. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Test,please ignore Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days.

wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,386
  • mmmmm SAKrelicious
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #82 on: February 05, 2020, 09:12:02 PM
Quote from: McStitchy on February 05, 2020, 09:09:31 PM
The new "crew" is building up fast Mags :salute:
I know! We're gonna have to squish in somehow.
'Use the force Harry' - Gandalf
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Test,please ignore Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo showing the Hook in use Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,019
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #83 on: February 05, 2020, 09:17:34 PM
 :ahhh :ahhh :ahhh
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

tr Offline ddogu

  • No Life Club
  • ******
    • Posts: 1,400
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #84 on: February 05, 2020, 09:23:03 PM
Quote from: Grant Lamontagne on February 02, 2020, 11:17:09 PM
If you need to know more about the Armbar Cork and Driver models, or you just need more Megan in your life, check this out:



Def

 :drool: :drool: :drool:
Merit Badges Start a new thread with a photo showing the Hook in use Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Must put something in order and provide link to the post. Start a new thread with photos of your carabiners in use Start a new thread with photos of your zip ties in use Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with photos of your hobo knives in use Start a new thread showing photos of your outdoor cooking Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #85 on: February 05, 2020, 09:24:48 PM
Quote from: ElevenBlade on February 05, 2020, 08:20:05 PM
:cheers:

I'll report on the results as soon as I get mine. 

For Science!

 :salute:

 :salute: :tu:

I might hammer something really soft. Maybe a banana or butter. Don‘t wanna destroy it the first day  :rofl:

Which one did you order?
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #86 on: February 05, 2020, 09:28:01 PM
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

za Offline Max Stone

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,982
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #87 on: February 05, 2020, 09:32:35 PM
Drive Onyx already out of stock! Seems their production is getting snapped up quickly...  :D
Capture.JPG
* Capture.JPG (Filesize: 57.82 KB)
Education is a journey that starts when you realize that knowing a little about something opens the door to the universe.
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of at least three (3) of your watches Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Must start a thread with a photo of your EDC watch Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a thread with photos of at least eight different colored ALOX models in your collection Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of a different SAK each day for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread demonstrating paracord knot tying Start a new thread showing photos of your outdoor cooking Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

it Offline SirVicaLot

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,979
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #88 on: February 05, 2020, 11:14:28 PM
That was fast. Would be interesting to know how many they had in stock. Did they just aim low, or did they have way more orders than expected?  ???
Merit Badges Start a new thread with photos of at least 5 different 111mm models in your collection Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread and post a photo of the multitool for thirty (30) consecutive days.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a thread with photos of at least five different colored ALOX models in your collection Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Must put something in order and provide link to the post. Start a new thread with pictures of a Fish Scaler in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection

us Offline ElevenBlade

  • *
  • No Life Club
  • ******
    • Posts: 3,121
Re: Gerber Armbar Driver and Armbar Cork (Coming Spring 2020)
Reply #89 on: February 05, 2020, 11:54:58 PM
Quote from: SirVicaLot on February 05, 2020, 09:24:48 PM
:salute: :tu:

I might hammer something really soft. Maybe a banana or butter. Don‘t wanna destroy it the first day  :rofl:

Which one did you order?

I ordered the Armbar Cork. 
Because apparently I think I need another corkscrew in my life.   :think:
Merit Badges Participate in a challenge by carrying  a Combo Edged knife or Multitool and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Must put something in order and provide link to the post.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.

Pages: 1 2 3 4   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $152.99
PayPal Fees: $8.68
Net Balance: $144.31
Below Goal: $155.69
Site Currency: USD
48% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal