Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Easy Mut Mods

JValro86 · 16 · 3535
« previous next »
Pages: 1   Go Down

Offline JValro86

  • New User
    • Posts: 3
Easy Mut Mods
on: May 10, 2020, 05:39:22 PM
Hello,
First of all, I am new at the post, in fact I am not a native English speaker so sorry for my mistakes. I am leatherman Owner for a while, I recently get a New one the Leatherman MUT, I am a civilian but the MUT have some features that fits me: The easy access of most of the tools and the hammer.
So let me show you my mods:
1-   I removed the security latch and add a small strung magnet that keeps the plier close
 

2-   Victorinox large tweezer, modifying a little bit the plastic bit part
 
3-   I added two needles again modifying a little bit the plastic bit part:


4-   I 3d printed a bit housing for small bits
 
5-   The file. It is a real need to have a file in the tool, I am planning to remove the saw and add the surge t-shank holder, but for the moment that is the best I could do, at list I can sharp the blade:

 
6-   The punch: I sharpen the punch, and create a new 3d printed part that have more space, I have some ideas for additions to the 8 32 thread part. I also added a very small screw to the threaded section of the pliers, son I can attach de sharpened punch.   



I am planning to do something with the scraper T recently bought a small sccisors for about 10€



Here you can find all the pictures
https://pin.it/6Xoh5bu



« Last Edit: May 10, 2020, 06:26:53 PM by JValro86 »

nz Offline Syncop8r

  • Absolutely No Life Club
  • *******
    • Posts: 8,763
Re: Easy Mut Mods
Reply #1 on: May 11, 2020, 06:19:19 AM
Cool mods and welcome to the forum!  :cheers:

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: Easy Mut Mods
Reply #2 on: May 11, 2020, 02:48:22 PM
Nice mods  :like: :tu:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

Offline JValro86

  • New User
    • Posts: 3
Re: Easy Mut Mods
Reply #3 on: May 11, 2020, 07:33:09 PM
Thanks Guys,
More improvements: it was a little bit difficult but I was able to 3d print the Bit part, I will try  to upload the 3d models to thingiverse in case you want to use them.










Most of the ideas are not new, but all together is a great improvement of the tool.

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: Easy Mut Mods
Reply #4 on: May 11, 2020, 07:38:07 PM
Definitely a excellent improvement
over the original model  :cheers:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

Offline Time22

  • Jr. Member
  • **
    • Posts: 98
Re: Easy Mut Mods
Reply #5 on: May 11, 2020, 07:38:29 PM
 :salute:

sg Offline x-iled

  • Newbie
  • *
    • Posts: 31
Re: Easy Mut Mods
Reply #6 on: May 11, 2020, 08:18:32 PM
Wow some really nice ideas there and great execution!! I'm a MUT fan myself and I think they have the best base platform for mods lol..

pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,214
  • Oxygen and magnesium toghether?! OMg!
Re: Easy Mut Mods
Reply #7 on: May 13, 2020, 01:49:40 PM
Quote from: Syncop8r on May 11, 2020, 06:19:19 AM
Cool mods and welcome to the forum!  :cheers:

+1

 :tu: :tu:
________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


au Offline ReamerPunch

  • Thread Killer 2017
  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,252
  • Born to multitask.
Re: Easy Mut Mods
Reply #8 on: May 13, 2020, 02:55:52 PM
Fantastic mods!  :like:
And welcome to the forum! :cheers:
Merit Badges  Carry tools with single functions only. No multi-tools, no multi-layer Swiss Army Knives, no combo one-piece tools and post a photo for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Delemont SAK for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. For each of the 30 days, or for as many as you are able to, post a picture of: Progress- Meals- Activities- Gear and participate in the thread and encourage each other. Participate  in Challenge thread and post a photo of your EDC or a component of the EDC that got used during the course of the day for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Opinel  knife  for 30 days Carry an orange item and post a picture of it everyday for 30 days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day.

Offline JValro86

  • New User
    • Posts: 3
Re: Easy Mut Mods
Reply #9 on: May 13, 2020, 06:30:19 PM
Hello,
Yesterday had some time and 3d print a new adition... The Covid19 leatherman pry bar.


us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 67,627
Re: Easy Mut Mods
Reply #10 on: May 14, 2020, 12:24:25 AM
Nice mods and welcome to the forum !  :like: :cheers: :tu:
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

pr Offline Juan el Boricua

  • No Life Club
  • ******
    • Posts: 3,141
Re: Easy Mut Mods
Reply #11 on: May 14, 2020, 12:56:57 AM
Excellent mod's, JVal, on such a great tool!!!
 :like: :tu:

LTC, are you reading this!?!?
 :pok: :pok: :pok:
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the pen for thirty (30) consecutive days.

Offline Bancomat85

  • Full Member
  • ***
    • Posts: 109
Re: Easy Mut Mods
Reply #12 on: June 13, 2020, 09:12:11 PM
Really nice mods bro! Can you tell me how to take apart the side tan insert, the one with the slot for the additional bit? I'd like to do the tweezers mod to my MUT, but don't know hot to do...  :dunno:

au Offline pietervn

  • *
  • No Life Club
  • ******
    • Posts: 1,712
Re: Easy Mut Mods
Reply #13 on: June 14, 2020, 11:19:40 AM
Quote from: Bancomat85 on June 13, 2020, 09:12:11 PM
Really nice mods bro! Can you tell me how to take apart the side tan insert, the one with the slot for the additional bit? I'd like to do the tweezers mod to my MUT, but don't know hot to do...  :dunno:

You are going to need a T10 driver to dismantle the plastic bits. If you open the saw and the knife blade you will see a Torx screw towards the pointy end of the saw and knife blade. Undo these two screws and push the plastic bit towards the hammer (I think, I have not taken one apart in a few years...) then lift it up. It might be lose once the screws are out. I added a pic with a yellow circle to show the screws that needs to come out.

Cheers, Pete
MUT_Yellow.jpg
* MUT_Yellow.jpg (Filesize: 137.9 KB)
Merit Badges Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread with a photo of your birth year SAK Start a new thread with photos of at least 5 different 111mm models in your collection Must start a thread with a photo of your stayglow SAK Must start a thread showing a photo of at least eight BO tools Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your titanium gear with a multitool or sak Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC

Offline Bancomat85

  • Full Member
  • ***
    • Posts: 109
Re: Easy Mut Mods
Reply #14 on: June 14, 2020, 11:36:25 AM
Thanks dude! Can i ask another question? Do the surge blade-exchanger fit without any mod or adjustment, in the place of the original saw? And did you ever tried to put it in the place of the bronze scraper? That mod could be a game changer for my mut!
« Last Edit: June 14, 2020, 12:50:43 PM by Bancomat85 »

au Offline pietervn

  • *
  • No Life Club
  • ******
    • Posts: 1,712
Re: Easy Mut Mods
Reply #15 on: June 14, 2020, 01:45:51 PM
Quote from: Bancomat85 on June 14, 2020, 11:36:25 AM
Thanks dude! Can i ask another question? Do the surge blade-exchanger fit without any mod or adjustment, in the place of the original saw? And did you ever tried to put it in the place of the bronze scraper? That mod could be a game changer for my mut!

That was a test fit, but it never worked as a drop-in mod where the saw is. I did not try fitting where the scraper is (A locking mechanism is required to prevent it from folding closed). There are some other members here that have done some excellent mods.

Have a read through this thread I did, I explain why it is not a direct drop in mod:
https://forum.multitool.org/index.php/topic,64616.msg1225709.html#msg1225709

Inmate: x-iled has done some good mods:
https://forum.multitool.org/index.php/topic,83078.msg2069978.html#msg2069978
https://forum.multitool.org/index.php/topic,83486.msg2056419.html#msg2056419

Cheers, Pete
« Last Edit: June 14, 2020, 01:53:06 PM by pietervn »
Merit Badges Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread with a photo of your birth year SAK Start a new thread with photos of at least 5 different 111mm models in your collection Must start a thread with a photo of your stayglow SAK Must start a thread showing a photo of at least eight BO tools Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with photos of your titanium gear with a multitool or sak Must start a thread with a photo of at least five (5) of your watches Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $152.99
PayPal Fees: $8.68
Net Balance: $144.31
Below Goal: $155.69
Site Currency: USD
48% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal